Project:
Item# C.S.I. Section 11400
OV310E
Mini Rotating Rack Convection Oven – Electric
STANDARD FEATURES
■ Rotating interior rack
•8 pan, end load with 4.0" slide spacing
■ Interior rack is easily removable for cleaning and routine maintenance
•Patented removable rack bottom for spot cleaning bake chamber floor
■ Self-contained patented steam system
■ Programmable digital control
■ Easy to open independent doors
■ Large dual-pane viewing window in each door
■ Space saving 48.0"w x 38.1"d footprint
■ Stainless steel construction
■ Shipped assembled
OPTIONS & ACCESSORIES
❏ Removable interior rack, one included with oven, use accessory code to order
additional racks:
❏ 310RCK-6EL: 6-pan capacity with 5.3" slide spacing, end load
❏ 310RCK-6SL: 6-pan capacity with 5.3" slide spacing, side load
❏ 310RCK-8EL: 8-pan capacity with 4.0" slide spacing, end load
❏ 310RCK-8SL: 8-pan capacity with 4.0" slide spacing, side load
❏ 310RCK-10EL: 10-pan capacity with 3.2" slide spacing, end load
❏ 310RCK-12EL: 12-pan capacity with 2.8" slide spacing, end load
R
❏ Vent guard package – adds 2" to overall width
❏ MB300: 34"h proofing cabinet base
❏ STAND-12PAN: 27"h stand base
❏ STAND-16ADJ: 24"h to 34"h adjustable height stand base
❏ OV310-BRIDGE: Slide bridge kit allows oven to accommodate pans smaller
than 18" x 26"
❏ FRY-BASKET: Stainless steel french fry baskets
Note: Capacities based on a standard 18"x26" pan
19220 State Route 162 East
Orting, WA 98360
www.baxterbakery.com
BX56067 (02-14) – Printed In USA
Area Reserved For Consultant & Contractor Approvals
Factory
(360) 893-5554
Customer Care
(800) 777-2828
or
(800) 333-7447
Customer Care Fax
(937) 332-2852
Page 1 of 2
C.S.I. Section 11400
OV310E
Mini Rotating Rack Convection Oven – Electric
Note: Door handle extends 3" beyond the face of the door.
• Shipping Weight: 730 lbs (331 kg) • Freight Class: 85 • Rack Swing Diameter: 31.5" • Maximum Door Swing: 115° (right)/180° (left)
UTILITIES
Water Connect Point: 1 ⁄ 2" NPT. Cold water @ 30-75 psi. min. @ 1.5 G.P.M.
flow rate. 3.0 G.P.H. maximum water usage.
NOTE: Water supply must have the proper hardness, pH & chloride concentration.
Consult your local water company and/or water conditioner dealer before
installation.
• Recommended hardness range: 2-4 grains per gallon.
• Recommended pH range: 7.0 to 8.0.
• Acceptable range for chloride concentration: 0-30 ppm.
Drain Fitting: 1 ⁄ 2" NPT. Route to air-gap drain.
Vent: Oven may need to be installed under a Type I (grease) or Type II (vapor) exhaust
hood. Consult local code.
Power - 2 supplies required:
1. Heating Circuit - Choose one:
❏
❏
❏
208V/60/3/50A18.0kW
220-240V/60/3/39.5-43A15.1-18.0kW
440-480V/60/3/20-22A 15.1-18.0kW
2. Control Circuit:
120V/60/1 15 amp max. dedicated circuit. 8' cord and NEMA 5-15P Plug
supplied.
•Oven Control: 4.4 amps
•Ventilator Connect Point: 5.0 amps max.
Contact factory for 50Hz.
INSTALLATION
The mini-rack oven is shipped assembled for easy installation. All components are
factory tested before shipment. This oven must be installed so that the top of the oven
is located above 6' AFF.
The purchaser is responsible for proper installation, including all utility connections.
In order to validate the warranty, the start-up must be performed by an Authorized
Baxter Servicer.
The OV310 unit will fit through a standard 36" doorway with doors, control panel and
trim package removed.
UL Listed for use only on level, noncombustible floor/surface. Access to right side
needed(24" min.) for service access. A vent guard is required if the right side of the
oven is within 30" of a radiant heat or grease vapor source.
SHORT SPECIFICATION
The oven shall be of stainless steel construction, manufactured in the United States
by Baxter Mfg. The unit footprint shall be no wider than 48.0" and shall be capable
of fitting through a standard 36" doorway. The standard digital control panel shall
have 99 programmable settings with auto on/off feature and 4-step bake/roast
setting. As a standard feature, the oven shall incorporate "sleep" settings to save
energy when not in use.
The heating system shall be designed with a nominal power rating of 18.0KW and
shall utilize a bank of 6 tubular incoloy ® -sheathed elements. Elements shall be sized
to maximize life and shall be individually removable for ease of service. The oven
shall have an interior carrier that rotates while in operation to ensure even
baking. The interior carrier shall be easily removable for cleaning and routine
maintenance.
The oven will bear the following agency approvals: UL for safety and sanitation for
the U.S. and Canada, Commonwealth of MA and city of Los Angeles. The oven shall
be listed for zero clearance to walls from by UL.
The oven shall be offered with several different base options to ensure a
combination best suited to site, production and operator's needs.
Manufacturer reserves the right to make changes in sizes and specifications.
19220 State Route 162 East
Orting, WA 98360
www.baxterbakery.com
Page 2 of 2
Factory
(360) 893-5554
Customer Care
(800) 777-2828
or
(800) 333-7447
Customer Care Fax
(937) 332-2852
BX56067 (02-14) – Printed In USA