Manufacturing Facility
12380 Kirk Rd., Olive
Branch, MI 38654
Tel 662.892.3415 Fax
662.892.3430
INSTALLATION INSTRUCTIONS
Control Panel Installation
Distribution Statement: This manual may not be distributed, duplicated, sold, or used without consent of View Inc. By
downloading this document, it is the user’s responsibility to make sure they have the latest copy of this publication.
Usage Statement: Our technical manuals are prepared as tools designed to inform our employees and customers of
technical data as it relates to our products and services. It is our goal to help you make informed decisions when
designing, specifying, ordering, installing, or maintaining View products.
View Inc. makes no guarantee as to the accuracy of information obtained from outside sources. Whenever possible,
links will be provided for additional information.
Doc | Released: May 19, 2015
© 2015 View Inc.
1 of 6
Manufacturing Facility
12380 Kirk Rd., Olive
Branch, MI 38654
Tel 662.892.3415 Fax
662.892.3430
INSTALLATION INSTRUCTIONS
Scope
1.
This manual will guide you through the basic installation of the Control Panel.
•
Determining the location and placement
•
Mounting Control Panel
•
Adding Power to the Control Panel
Description
The View Control Panel (with Class 2 outputs) houses the control components and power source that are responsible for
the operation of a View Dynamic Glass system. The output ports of this control panel are power limited to 24VDC and
meet the 100VA requirements of a Class 2 classified circuit as defined by the National Electric Code (NEC).
Wall View
Top View
Features
1.
2.
Packaged solution in a single wall-mounted enclosure to simplify installation.
Power limited to allow Class 2 cabling for greater installation flexibility.
Doc | Released: May 19, 2015
© 2015 View Inc.
2 of 6
Manufacturing Facility
12380 Kirk Rd., Olive
Branch, MI 38654
Tel 662.892.3415 Fax
662.892.3430
INSTALLATION INSTRUCTIONS
Procedures
1.
The Control Panel should be placed in the location determined by the General Contractor as seen on the
Interconnect Drawings (schematics). The Control Panel is indicated by a ( ) on the Interconnect Drawing. If there
are multiple Control Panels for the installation, they will be marked with their designated location and labeled to
coincide with the Interconnect Drawings.
2.
Before mounting the Control Panel to the wall, be sure enough clearance is provided to install the Trunk Line and
Power Insert cables as required. See mounting error below.
3.
Securely mount the Control Panel through the 4 eyelids onto the wall using industry standard mounting practices.
Doc | Released: May 19, 2015
© 2015 View Inc.
3 of 6
Manufacturing Facility
12380 Kirk Rd., Olive
Branch, MI 38654
Tel 662.892.3415 Fax
662.892.3430
INSTALLATION INSTRUCTIONS
Add power
1.
Insert AC Power Cable (not provided by View) through to port shown below.
2.
Insert AC Power Cable (not provided by View) through to port shown below.
Doc | Released: May 19, 2015
© 2015 View Inc.
4 of 6
Manufacturing Facility
12380 Kirk Rd., Olive
Branch, MI 38654
Tel 662.892.3415 Fax
662.892.3430
INSTALLATION INSTRUCTIONS
3.
Open the front panel to reveal the inside of the Control Panel. Configure the AC Power wiring as shown on the
silver panel. Note: The silver panel must be removed to complete the installation of the AC Power wiring.
4.
Once the AC Power is installed, turn the Control Panel on.
5.
Verify the green light is illuminated on the front of the Control Panel. Once verified, turn the Control Panel off.
Doc | Released: May 19, 2015
© 2015 View Inc.
5 of 6
Manufacturing Facility
12380 Kirk Rd., Olive
Branch, MI 38654
Tel 662.892.3415 Fax
662.892.3430
Doc | Released: May 19, 2015
© 2015 View Inc.
INSTALLATION INSTRUCTIONS
6 of 6