PROJECT INFORMATION
LED
STRATALUME CONNECTS™
NSF2
Job Name MAUC Series
Fixture Type
AUC/MAUC SERIES – LED
Catalog Number Approved by
PRODUCT FEATURES:
»»Available in 7 lengths to fit
any application
1
2
3
4
»»External mounting feet allow for
easy installation
»»Antimicrobial finish standard when
used in Healthcare applications
1 Wiring Module w/ Hospital Grade Outlet
2 Wiring Module w/ Rocker Switch
3 Power Cordset
4 Interconnect Cordset
4.50"
1.25"
SPECIFICATIONS
Solid Front
HOUSING: Extruded marine-grade aluminum. Nominal thickness: 0.060". Antimicrobial finish
standard on housing and driver cover with MAUC series only.
X"
LENS: UV-stabilized, high-impact resistant, extruded frost 100% DR acrylic. Smooth exterior, linear
prism interior. Snap-in tool-less entry design.
END CAPS/COVERS: UV-stabilized, high-impact resistant, injection-molded white or black opaque
polycarbonate. Black end caps/covers provided when silver finish (SL) is ordered. Light leakpreventing interlocking design.
ELECTRICAL ACCESSORIES: Wiring modules available with 15 amp hospital grade outlet or
master switch. Construction and installation match fixtures. Cordsets: Custom-molded plugs, SVT
cord, snap-together design. Power cordsets connect to left side of fixture series; 120V wall outlet
powered, 6 amps max. Interconnect cordsets electrically connect fixtures. Available in white or black
finish.
(4) 0.188" Mounting Holes
GASKET: Closed-cell extruded EPDM gasket seals lens to end caps.
LENGTH DIMENSION
ELECTRICAL: Replaceable high-brightness ANSI 4000K white LED array. High power factor driver;
<20% THD. Male and female grounded connectors provided at ends of series-mount fixtures. See
Options and Accessories for additional electrical capabilities.
WARRANTY: Lifetime Guarantee against defects in workmanship and materials (LED’s and Drivers
excluded) for the product life of the original installation. Three year warranty on LED lamps and
driver for defects resulting in a fixture lumen depreciation of 30% or greater.
X
Max Current
MODEL
LAMP
(in)
at 120V
9L40K
9W LED
13.00
–
14L40K
14W LED
18.50
0.129
18L40K
18W LED
24.00
0.194
23L40K
23W LED
29.50
0.259
27L40K
27W LED
35.00
0.323
32L40K
32W LED
40.50
0.453
36L40K
36W LED
46.00
0.517
WML –6.00
WML/HGO– 8.00
WML/SW– 6.00
LISTINGS: UL and CUL listed for Dry Location. Cord-equipped models listed as Portable Luminaires.
NSF2 Splash/Non-Food Zone for MAUC series only. All Kenall SSL Luminaires are tested to the
IESNA LM-79-08 standard requiring spectroradiometric measurements for CRI and CCT as well as
goniophotometric measurements for lighting distributions and total luminous flux.
NOTE: Subtract 0.54" for each end cover removed to get overall length in series mount
applications. When ordering the power or interconnect cordset, allow at least 2"
clearance on the side of the fixture. To calculate maximum allowable fixtures in a series
run, divide 6 amps maximum current by the maximum current of each fixture.
INSTALLATION: External mounting feet allow installation without accessing internal compartments.
Four-point mounting required for individual fixtures and initial fixture in series-mount run. Two-point
mounting required for subsequent series-mount fixtures. UL fitting for 3/8" flexible conduit or NM
wire supplied. Direct wire in rear of fixture uses push-in connectors behind quick-access cover. Direct
wire into sides of fixture uses included adapter plate. Maximum current of series-runs 6 amps per
circuit (see table at right).
ORDERING INFORMATION
Model
Installation Type
Finish
Lamp Type/Length
Voltage
Options
Accessories
120
Model
AUCLED Architectural Applications
MAUCLED† Healthcare Applications
Installation Type
I
Individual Mount
S
Series Mount
Finish
MW† Matte White
MB† Matte Black
SL†Silver
CCW Custom Color with White end caps
CCB Custom Color with Black end caps
†Antimicrobial finish standard for MAUC Series
Lamp Type/Length
9L40K 13" – 9 Watt 4000K LED
14L40K 18.5" – 14 Watt 4000K LED
18L40K 24" – 18 Watt 4000K LED
23L40K 29.5" – 23 Watt 4000K LED
27L40K 35" – 27 Watt 4000K LED
32L40K 40.5" – 32 Watt 4000K LED
36L40K 46" – 36 Watt 4000K LED
Voltage
120 120 Volts
Options
CS 8' Hard-wired Cordset
2C Series Mount Two-Circuit Wiring
FS Single Fuse & Holder
HGO Hospital Grade Grounded Outlet –15A, 125V
(n/a with 9 Watt fixture)(Individual Mount only)
SW Rocker Switch
www. kenall.com
P: 800-4-Kenall
F: 847-360-1781
Accessories (Series Mount only)**
WML
6" Wiring Module w/o Accessory
WML/HGO* 8" Wiring Module w/ Hospital Grade Outlet
WML/SW* 6" Wiring Module w/Rocker Switch
PCL2
2' Straight Power Cordset
PCL3
3' Straight Power Cordset
PCL4
4' Straight Power Cordset
PCL6
6' Straight Power Cordset
PCL10
10' Straight Power Cordset
ICL05
6" Straight Interconnect Cordset
ICL1
1' Straight Interconnect Cordset
ICL2
2' Straight Interconnect Cordset
ICL3
3' Straight Interconnect Cordset
** When ordering Accessories, add color suffix:
–WHT white, –BLK black, –SLV silver, –CCW/–CCB
custom color (–SLV and –CCW/–CCB for Wiring Modules only)
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is manufactured in the USA with components purchased from US suppliers, and
meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents
thereof. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2011 Kenall Mfg. Co. All rights reserved.
AUC_MAUC_LED-111111