Taiwan Oasis SMD LED Product Lines (CHIP LED)
LED0603
LED0603
LED0603
LED1608
LED1608
LED1608
LED1615
LED1615
LED3227
LED2013
LED2013
LED2013
LED3210
LED3210
LED3210
LED3216
LED3216
LED3216
Taiwan Oasis SMD LED Product Lines (PLCC Type)
LED2908
LED2908
LED2908
LED3228
LED3228
LED3228
LED3228
LED3228
LED2808
LED5050
LED5050
LED2810
SMD LED Product Code Rule
TO - □□□□□ □ - □…… □
I
II
I. Taiwan Oasis
II. Package Dimension and Lens Type
standard
1608T:[1.6*0.8*0.40], Normal Plane
1608B:[1.6*0.8*0.75], Normal Plane
1615B:[1.6*1.5*0.75], Normal Plane
2013B:[2.0*1.25*0.90], Normal Plane
3210A:[3.2*1.01*1.48], Normal Dome
3210B:[3.2*1.01*1.05], Normal Plane
3216A:[3.2*1.6*1.50], Normal Dome
3216B:[3.2*1.6*1.05], Normal Plane
3227B:[3.2*2.7*1.05], Normal Plane
3228B:[3.2*2.8*1.90], Normal Plane
2810S:[2.8*1.0*1.20], Side Emitting
2908S:[2.9*0.8*1.40], Side Emitting
others
A0603B:[1.6*0.8*0.40], Normal Plane
B0603B:[1.6*0.8*0.55], Normal Plane
D0805B:[2.0*1.25*1.1], Normal Plane
D1206B:[3.2*1.60*1.1], Normal Plane
Note:[L*W*H] in mm
III. Lens Color:
C - Water Clear
D - Color Diffused
T - Color Transparent
Y - Yellow Diffused (Fluoresce)
R - Red Diffused (Fluoresce)
W - White Diffused
III
IV
V
IV. Emitting Color Code
Single chip
V — 405 Violet (InGaN/SiC)
B — 468 Blue (InGaN/GaN)
BG —505 Bluish Green(InGaN)
P — 525
Pure Green (InGaN/GaN)
SG — 540 Green (InGaN/SiC)
T — 562 True Green(AlGaInP/GaAs)
G — 572 Green (GaP)
MG — 572 High Bright Green (AlGaInP)
Y — 586 Yellow (GaAsP/GaP)
MY —590 High Bright Yellow (AlGaInP)
MA — 605 High Bright Amber (AlGaInP)
A — 606 Amber(GaAsP/GaP)
ME — 623 Super Bright Orange(AlGaInP)
E — 621 Orange (GaAsP/GaP)
MR — 630 Ultra Bright Red (AlGaInP)
MRL— 640 Ultra Bright Red (AlGaInP)
K — 648 Hi-Orange (GaAlAs/GaAs)
H — 660 Hi-Red (GaAlAs/GaAs)
S — 660 Super-Red (GaAlAs/GaAs)
R —700 Red (GaP)
D — X=0.45; Y=0.17 Pink(InGaN)
MW —X=0.30,Y=0.29 White(InGaN/GaN)
Multi-chip
Combination of above chip code
V：Brightness Code
Reliability Testing plan
Reliability Items
1 DC Operating Life
Condition
Ta=25℃
upon product
Duration, If
2
Operation Life Test of
High Temperature Humidity
Ta= 65℃ RH=90%
Duration, If
3
Operation Life Test of
High Temperature
Ta= 55℃ If=30mA
Duration, If
Pulse width=10msec
Duty cycle 1/10
Duration, Ifp
-40℃*10mins~100℃*10mins
Duration
Ta= 65℃ RH=90%
Ta= 105℃
Ta= -35℃
Duration
Duration
Duration
T=260±5℃
Duration
4 Pulse operating Life
5 Thermal Shock
Temperature Humidity
6
Storage
7 High Temperature Storage
8 Low Temperature Storage
9 Soldering Pot
10 Wave soldering
11 IR-Reflow
Pre-heat:120 ℃ 10sec
Dipping: 260 ℃ 5sec
Duration
Tp=260℃ refer to SMT profile
Duration
12 Solderbility
T=235 ±5℃
Duration
13 Ink-soaking
Soaked in Ink,Ta=80℃
Duration
HBM/Negtive,Positive/3 times
Voltage
14 ESD Test
Suggestion IR Reflow Profile for Normal Process
225
R3
R4
165
R2
183℃
90SEC
MAX
125
R5
R1
25
0
Z1
40
Z2
140
Z3
162
Z4
240
Sec
Suggest IR Reflow Profile for Pb Free Process
255
R4
R3
200
R2
150
R1
25
0
ABOVE
220　10-40 Sec
R5
Taiwan Oasis CHIP LED Products
Package
Representative Parts
Number
Emitting
Dominant
Lens
Type
Luminous Intensity
Viewing
Angle
IV (mcd)
at If
(mA)
2θ 1/2
Color
Wavelength
TO-B0603BC-MRE
Red
630
Clear
100
20
130
TO-B0603BC-MEE
Orange
623
Clear
100
20
130
TO-B0603BC-MAE
Amber
605
Clear
100
20
130
TO-B0603BC-MYE
Yellow
590
Clear
100
20
130
TO-B0603BC-MGE
Green
572
Clear
100
20
130
TO-B0603BC-PF
Pure Green
525
Clear
280
20
130
TO-B0603BC-UBF
Blue
468
Clear
200
20
130
TO-B0603BY-MWF
White
X:0.30,Y:0.29 Yellow
280
20
140
Technical Data
Pdf
Chip LED 0603
文档
文档
Part NO
TO-B0603BC- MR / ME / MA / MY / MG
Features
1. Superior brightness with AlInGaP technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. ESD withstanding capacity up to 2 kV
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Ratings
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
75
20
80
-5
-35~+85
-35~+105
260 / 5
TO-B0603BC-MR
TO-B0603BC-ME
TO-B0603BC-MA
TO-B0603BC-MY
TO-B0603BC-MG
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
DICE Emitting
Condition
Technical color
If (mA)
VF(V)
IV(mcd)
λd(nm)
2θ1/2
Typ
Max
Typ)
min
Typ
130
20
1.9
2.4
630
50
100
130
TO-B0603BC-ME AlGalnP Orange
20
2.0
2.4
623
50
100
130
TO-B0603BC-MA AlGalnP Amber
20
2.0
2.4
605
50
100
130
TO-B0603BC-MY AlGalnP Yellow
20
2.0
2.4
590
50
100
130
TO-B0603BC-MG AlGalnP Green
20
2.0
2.4
572
50
100
130
TO-B0603BC-MR AlGalnP
Red
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/5
REV：A
Prepared by：W.L.Y
Package Dimensions
CATHODE MARK
MOLDING
BODY(LENS)
0,18
1.08
0,8
DIE
1,18
1,6
0,8
0.55
CATHODE MARK
Soldering area
Divice center
1
0.3
Recommended soldering pattern
0.75
0.65
0.75
Units:mm
Unspecified tolerance:㊣0.1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/5
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0.2
1.5
2.0
4.0
Cathode
1.75
3.5
8.0
0.5
0.7
POLARITY
Reel Direction
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-B0603BC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-B0603BC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:4000PCS
BIN CODE:
XX XX
ATTENTION:
static
Brig htness Code
Emitting Colo r Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Part NO
TO-B0603BC- P/ UB
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Ratings
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-B0603BC-P
105
20
80
-5
-35~+85
-35~+105
260 / 5
TO-B0603BC-UB
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test
Part
Number
TO-B0603BC-P
TO-B0603BC-UB
DICE Emitting Condition
Technical color
If (mA)
Pure
InGaN
Green
InGaN
Blue
VF(V)
λd(nm)
IV(mcd)
2θ1/2
Typ
Max
Typ)
min
Typ
20
3.3
3.6
525
150
280
130
20
3.3
3.6
468
150
200
130
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
CATHODE MARK
MOLDING
BODY(LENS)
0,18
1.08
0,8
DIE
1,18
1,6
0,8
0.55
CATHODE MARK
Soldering area
Divice center
1
0.3
Recommended soldering pattern
0.75
0.65
0.75
Units:mm
Unspecified tolerance:㊣0.1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0 .2
1 .5
2 .0
4 .0
C a th o d e
1 .7 5
3 .5
8 .0
0 .5
0 .7
P O L A R IT Y
R e e l D ire c tio n
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-B0603BC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-B0603BC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:4000PCS
BIN CODE:
XX XX
ATTENTION:
static
Bri ghtness Code
Emitting Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Part No.
TO-B0603BY- MW
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-B0603BY-MW
105
80
-5
-35~+85
-35~+105
260 / 5
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
TO-B0603BY-MW
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
InGaN
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
White
20
Prepared Date：
2006/09/28
3.3
3.6
X
Y
TYP
0.3
0.29
Iv(mcd)
Min
Typ
150
280
Page 1/5
REV：A
Prepared by：W.L.Y
2θ1/2
140
Package Dimensions
CATHODE MARK
MOLDING
BODY(LENS)
0,18
1.08
0,8
DIE
1,18
1,6
0,8
0.55
CATHODE MARK
Soldering area
Divice center
1
0.3
Recommended soldering pattern
0.75
0.65
0.75
Units:mm
Unspecified tolerance:㊣0.1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/5
REV：A
Prepared by：W.L.Y
Chromaticity Diagram
0.35
0.34
0.33
0.9
520
0.8
A6
0.32
530
0.31
540
510
550
0.7
0.30
A4
0.29
A3
A5
560
0.6
570
0.5
500
580
0.28
A2
590
0.4
0.3
0.27
600
610
620
630
490
0.25
0.2
0.1
A1
0.26
480
0.24
470
0.8
0.34
0.7
0.33
0.6
0.32
0.5
0.31
0.4
0.30
0.3
0.29
0.2
0.28
0.1
0.27
0
0.26
0
460
Color Bins
A2
A1
X
0.280
0.268
0.278
0.288
X
0.288
0.278
0.287
0.296
Y
0.248
0.262
0.279
0.262
Y
0.262
0.279
0.295
0.276
0.296
0.276
A3
0.292
0.286
0.292
0.286
A4
0.287
0.295
0.307
0.315
0.309
0.305
0.311
0.294
A5
0.309
0.305
X
0.309
A6
0.307
0.330
0.330
Y
0.305
0.315
0.339
0.329
X
Y
X
Y
0.309
0.305
0.330
0.329
0.311
0.294
0.330
0.318
X
Y
※ Color Coordinates Measurement allowance is±0.01.
※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0 .2
4 .0
1 .5
2 .0
C a th o d e
1 .7 5
3 .5
8 .0
0 .5
0 .7
P O L A R IT Y
R e e l D ire c tio n
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-B0603BY-XX
LOT NO:LEZXX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-B0603BY-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:4000PCS
BIN CODE:
XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 5/5
REV：A
Prepared by：W.L.Y
Taiwan Oasis CHIP LED Products
Package
Representative Parts
Number
Emitting
Dominant
Lens
Type
Luminous Intensity
Viewing
Angle
IV (mcd)
at If
(mA)
2θ 1/2
Color
Wavelength
TO-1608BC-MRE
Red
630
Clear
100
20
130
TO-1608BC-MEE
Orange
623
Clear
100
20
130
TO-1608BC-MAE
Amber
605
Clear
100
20
130
TO-1608BC-MYE
Yellow
590
Clear
100
20
130
TO-1608BC-MGE
Green
572
Clear
80
20
130
TO-1608BC-PF
Pure Green
525
Clear
280
20
130
Technical Data
Pdf
Chip LED 1608（0603)
文件
文件
TO-1608BC-BF
Blue
TO-1608BY-MWF
White
468
Clear
X:0.30,Y:0.29 Yellow
200
20
130
280
20
140
文件
Part NO
TO-1608BC- MR / ME / MA / MY / MG
Features
1. Superior brightness with AlInGaP technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. ESD withstanding capacity up to 2 kV
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Ratings
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
75
20
80
-5
-35~+85
-35~+105
260 / 5
TO-1608BC-MR
TO-1608BC-ME
TO-1608BC-MA
TO-1608BC-MY
TO-1608BC-MG
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
DICE Emitting
Condition
Technical color
If (mA)
VF(V)
2θ1/2
IV(mcd)
λd(nm)
Typ
Max
Typ)
min
Typ
130
20
1.9
2.4
630
50
100
130
TO-1608BC-ME AlGalnP Orange
20
2.0
2.4
623
50
100
130
TO-1608BC-MA AlGalnP Amber
20
2.0
2.4
605
50
100
130
TO-1608BC-MY AlGalnP Yellow
20
2.0
2.4
590
50
100
130
TO-1608BC-MG AlGalnP Green
20
2.0
2.4
572
30
80
130
TO-1608BC-MR AlGalnP
Red
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
1,6
0,15
0,7
PCB
Emisson center
0,35
0,75
Epoxy resin
0,8
1,6
0,35
Cathode mark
Recommended soldering pattern
Soldering area
0.75
Note:
Divice center
Units:mm
0.65
0.75
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4 .0
0.2
1.5
4.0
C athode
1.75
3.5
8.0
0.5
0.7
P O LA R IT Y
R eel D irection
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-1608BC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-1608BC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:4000PCS
BIN CODE:
XX XX
ATTENTION:
static
Brigh tness Code
Emi tt ing Co lor Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Part NO
TO-1608BC- P /B
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-1608BC-P
105
20
TO-1608BC-B
105
20
80
-5
-35~+85
-35~+105
260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
TO-1608BC-P
InGaN
TO-1608BC-B
InGaN
Pure
Green
Blue
λd
(nm)
Iv(mcd)
Typ
Min
Typ
2θ1/2
20
3.3
3.6
525
150
280
130
20
3.3
3.6
468
150
200
130
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
1,6
0,15
0,8
0,7
Epoxy resin
PCB
Emisson center
0,35
0,35
0,75
1,6
Cathode mark
Recommended soldering pattern
Soldering area
0.75
Note:
Divice center
Units:mm
0.65
0.75
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4 .0
0.2
4.0
1.5
C athode
1.75
3.5
8.0
0.5
0.7
P O LA R IT Y
R eel D irection
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-1608BC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-1608BC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:4000PCS
BIN CODE:
XX XX
ATTENTION:
static
Brightness C ode
Emitting Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Part No.
TO-1608BY- MW
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-1608BY-MW
105
80
-5
-35~+85
-35~+105
260 / 5
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
TO-1608BY-MW
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
InGaN
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
White
20
Prepared Date：
2006/09/28
3.3
3.6
X
Y
TYP
0.3
0.29
Iv(mcd)
Min
Typ
150
280
Page 1/5
REV：A
Prepared by：W.L.Y
2θ1/2
140
Package Dimensions
1,6
0,35
0,35
1,6
0,15
0,8
0,7
0,75
Epoxy resin
PCB
Emisson center
Cathode mark
Recommended soldering pattern
Soldering area
Units:mm
0.65
0.75
Note:
Divice center
0.75
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Chromaticity Diagram
0.35
0.34
0.33
0.9
520
0.8
A6
0.32
530
0.31
540
510
550
0.7
0.30
A4
0.29
A3
A5
560
0.6
570
0.5
500
580
0.28
A2
590
0.4
0.3
0.27
600
610
620
630
490
0.25
0.2
0.1
A1
0.26
480
0.24
470
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
0.8
Prepared Date：
2006/09/28
0.34
0.7
0.33
0.6
0.32
0.5
0.31
0.4
0.30
0.3
0.29
0.2
0.28
0.1
0.27
460
0
0.26
0
Page 2/5
REV：A
Prepared by：W.L.Y
Color Bins
A2
A1
X
0.280
0.268
0.278
0.288
X
0.288
0.278
0.287
0.296
Y
0.248
0.262
0.279
0.262
Y
0.262
0.279
0.295
0.276
0.307
0.315
0.309
0.305
A3
X
Y
0.296
0.276
0.292
0.286
A4
0.309
0.305
0.311
0.294
0.330
0.329
0.330
0.318
X
Y
0.292
0.286
A5
X
Y
0.311
0.294
0.309
0.305
0.287
0.295
A6
X
0.309
0.307
0.330
0.330
Y
0.305
0.315
0.339
0.329
※ Color Coordinates Measurement allowance is±0.01.
※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4 .0
0.2
1.5
4.0
C athode
1.75
3.5
8.0
0.5
0.7
P O LA R IT Y
R eel D irection
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-1608BY-XX
LOT NO:LEZXX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-1608BY-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:4000PCS
BIN CODE:
XX XX
ATTENTION:
static
Brightness Code
Emitting Colo r Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 5/5
REV：A
Prepared by：W.L.Y
Taiwan Oasis Chip LED Products
Package
Representative Parts
Number
Emitting
Dominant
Color
Wavelength
Red
630
Lens
Type
Luminous Intensity
Viewing
Angle Technical Data Pdf
IV (mcd)
at If
(mA)
2θ 1/2
100
20
130
100
20
130
100
20
130
100
20
130
100
20
130
100
20
130
100
20
130
100
20
130
100
20
130
100
20
130
100
20
130
Chip LED Chip LED Bi-Color
TO-1615BC-MRMAEE
Clear
Amber
605
Red
630
TO-1615BC-MRMGEE
Clear
Yellow
572
Red
630
TO-1615BC-MRBEE
Clear
Blue
468
Orange
623
TO-1615BC-MEBEE
Clear
Blue
468
Amber
605
TO-1615BC-MAMGEE
Clear
Green
572
Amber
605
TO-1615BC-MABEE
Clear
Blue
468
100
20
130
Red
630
100
20
130
280
20
130
Chip LED 1615 RGB
TO-1615BC-MRPBEFE Pure Green
525
Clear
Blue
468
100
20
130
Orange
623
100
20
130
100
20
130
100
20
130
TO-1615BC-MEPBEFE Pure Green
Blue
525
468
Clear
Part No
TO-1615BC- MRMA / MRMG / MRB/MEB/MAMG/MAB
Features
1. Superior brightness with AlInGaP/ InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
TO-1615BC-MRMA
TO-1615BC-MRMG
TO-1615BC-MRB
TO-1615BC-MEB
TO-1615BC-MAMG
TO-1615BC-MAB
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
75
20
75
20
75
20
75
20
75
20
105
20
75
20
80
-5
-35~+85
-35~+105
260 / 5
Sec
105
20
75
20
75
20
75
20
105
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/5
REV：A
Prepared by：W.L.Y
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
Dice
Emitting Conditi
Technical
color
on
Vf(V)
If (mA) Typ Max
TO-1615BC-MRMA
TO-1615BC-MRMG
TO-1615BC-MRB
TO-1615BC-MEB
TO-1615BC-MAMG
TO-1615BC-MAB
AlInGaP
Red
AlInGaP
Green
AlInGaP
Orange
AlInGaP
Blue
AlInGaP
Amber
InGaN
Prue Green
AlInGaP
Orange
InGaN
Blue
AlInGaP
Amber
AlInGaP
Green
AlInGaP
Amber
InGaN
Blue
20
20
20
20
20
20
λd
(nm)
Iv(mcd)
Typ
Min
Typ
1.9
2.0
630
50
100
2.0
2.4
605
50
100
2.0
2.4
630
50
100
2.0
2.4
572
50
100
2.0
2.4
630
50
100
3.3
3.6
468
50
100
2.0
2.4
623
50
100
3.3
3.6
468
50
100
2.0
2.4
605
50
100
2.0
2.4
572
50
100
2.0
2.4
605
50
100
3.3
3.6
468
50
100
2θ1/2
130
130
130
130
130
130
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/5
REV：A
Prepared by：W.L.Y
Package Dimensions
1,55
0.28
3
1
3
2
4
MA
B
1,65
0,7
1
MOLDING
BODY(LENS)
2
4
0,75
CATHODE
MARK
Recommended soldering pattern
0.4
5.0
1.63
SOLDERING
TERMINAL
1.5
CATHODE
MARK
0.20
1.0
Note:
Units:mm
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
Re e l
Di r e c t i o n
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-1615BC-XXXX
LOT NO:LEZ XX XX XXX
QUANTITY:4000PCS
BIN CODE: X
XX
ATTENTION:
static
Green Color Brightness
Red Brightness
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-1615BC-XXXX
LOT NO:LEZ XX XX XXX
QUANTITY:4000PCS
BIN CODE:
X XX
ATTENTION:
static
Green C olor Brightness
Red Bright ness
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 5/5
REV：A
Prepared by：W.L.Y
Part No
TO-1615BC- MRPB/MEPB
Features
1. Superior brightness with AlInGaP/ InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
TO-1615BC-MRPB
TO-1615BC-MEPB
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
75
20
105
20
105
20
75
20
80
-5
-35~+85
-35~+105
260 / 5
105
20
105
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/6
REV：A
Prepared by：W.L.Y
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
Dice
Emitting Conditi
Technical
color
on
Vf(V)
If (mA) Typ Max
AlInGaP
TO-1615BC-MRPB
TO-1615BC-MEPB
InGaN
Red
Pure Green
20
λd
(nm)
Iv(mcd)
Typ
Min
Typ
1.9
2.4
630
50
100
3.3
3.6
525
150
280
InGaN
Blue
3.3
3.6
468
50
100
AlInGaP
Orange
2.0
2.4
623
50
100
InGaN
Pure Green
3.3
3.6
525
50
100
InGaN
Blue
3.3
3.6
468
50
100
20
2θ1/2
130
130
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/6
REV：A
Prepared by：W.L.Y
Package Dimensions
1,55
1
3
3
1,65
0,7
1
MOLDING
BODY(LENS)
0.28
2
2
4
MA
B
4
0,75
CATHODE
MARK
Recommended soldering pattern
0.4
5.0
1.63
SOLDERING
TERMINAL
1.5
CATHODE
MARK
0.20
1.0
Note:
Units:mm
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/6
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/6
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
Re e l
Di r e c t i o n
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-1615BC-XXXXXX
LOT NO:LEZ XX XX XXX
QUANTITY:4000PCS
BIN CODE: X
X
X
ATTENTION:
static
Blue Brightness
Green Color Brightness
Red Color Brightness
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-1615BC-XXXXXX
LOT NO:LEZ XX XX XXX
QUANTITY:4000PCS
BIN CODE:
X X X
ATTENTION:
static
Blue Bright ness
Gree n Brightness
Red Bright ness
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 5/6
REV：A
Prepared by：W.L.Y
Taiwan Oasis Chip LED Products
Package
Representative Parts
Number
Emitting
Dominant
Color
Wavelength
Red
630
Lens
Type
Luminous Intensity
Viewing
Angle Technical Data Pdf
IV (mcd) at If (mA) 2θ 1/2
Chip LED 3227 Bi-Color
TO-3227BC-MRMGEE
100
20
140
100
20
140
100
20
140
100
20
140
100
20
140
100
20
140
100
20
140
100
20
140
100
20
140
100
20
140
clear
Green
572
Red
630
TO-3227BC-MRBE
clear
Blue
468
Amber
605
文档
clear
TO-3227BC-MAMGEE
Green
572
Yellow
590
TO-3227BC-MYBEE
clear
Blue
468
Yellow
590
clear
TO-3227BC-MYMGEE
Green
572
Part No
TO-3227BC- MRMG/MRB/MAMG/MYB/MYMG
Features
1. Superior brightness with AlInGaP/ InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
TO-3227BC-MRMG
TO-3227BC-MRB
TO-3227BC-MAMG
TO-3227BC-MYB
TO-3227BC-MYMG
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
75
20
75
20
75
20
105
20
75
20
75
20
80
-5
-35~+85
-35~+105
260 / 5
Sec
75
20
105
20
75
20
75
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/5
REV：A
Prepared by：W.L.Y
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
Dice
Emitting Conditi
Technical
color
on
Vf(V)
If (mA) Typ Max
TO-3227BC-MRMG
TO-3227BC-MRB
AlInGaP Red
AlInGaP Green
AlInGaP Red
InGaN
TO-3227BC-MAMG
TO-3227BC-MYB
TO-3227BC-MYMG
20
Blue
AlInGaP Amber
AlInGaP Green
AlInGaP Yellow
InGaN
20
Blue
AlInGaP Yellow
AlInGaP Green
20
20
20
λd
(nm)
Iv(mcd)
Typ
Min
Typ
1.9
2.0
630
50
100
2.0
2.4
572
50
100
2.0
2.4
630
50
100
3.3
3.6
468
50
100
2.0
2.4
605
50
100
2.0
2.4
572
50
100
2.0
2.4
590
50
100
3.3
3.6
468
50
100
2.0
2.4
590
50
100
2.0
2.4
572
50
100
2θ1/2
140
140
140
140
140
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/5
REV：A
Prepared by：W.L.Y
Package Dimensions
2,7
1,41
0,48
CATHODE
MARK
DIE
2
3,2
0,8
B
MR
1,05
B
0,51
R0,25
MR
Recommended soldering pattern
0,79
0.4
1.5
5.0
CATHODE
MARK
0,51
1.0
Note:
Units:mm
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
C a th o d e
4 .0
0 .2 0
4 .0
1 .5
1 .7 5
8 .0
3 .5
1 .4 2
1 .0
R e e l D ire c tio n
3 .0 2
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3227BC-XXXX
LOT NO:LEZ XX XX XXX
QUANTITY:3000PCS
BIN CODE: XX
XX
ATTENTION:
static
Green Color Brightness
Red Color Brightness
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-32278BC-XXXX
LOT NO:LEZ XX XX XXX
QUANTITY:3000PCS
BIN CODE:
XX XX
ATTENTION:
static
Green Color B ri ghtness
R ed C ol or Bright ness
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 5/5
REV：A
Prepared by：W.L.Y
Taiwan Oasis Chip LED Products
Package
Emitting
Dominant
Color
Wavelength
TO-2013BC-MRE
Red
630
TO-2013BC-MEE
Orange
TO-2013BC-MAE
Representative Parts
Number
Lens
Type
Luminous Intensity
Viewing
Angle Technical Data Pdf
IV (mcd)
at If
(mA)
2θ 1/2
Clear
100
20
140
623
Clear
100
20
140
Amber
605
Clear
100
20
140
TO-2013BC-MYE
Yellow
590
Clear
100
20
140
TO-2013BC-MGE
Green
572
Clear
100
20
140
TO-2013BC-PF
Pure Green
525
Clear
280
20
140
TO-2013BC-BF
Blue
468
Clear
200
20
140
TO-2013BY-MWG
White
X:0.30,Y:0.29 Yellow
560
20
150
Chip LED 2013
文档
Part No
TO-2013BC- MR / ME / MA / MY / MG
Features
1. Superior brightness with AlInGaP technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. ESD withstanding capacity up to 2 kV
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-2013BC-MR
75
20
TO-2013BC-ME
75
20
TO-2013BC-MA
75
20
80
-5
-35~+85
-35~+105
260 / 5
TO-2013BC-MY
75
20
TO-2013BC-MG
75
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
λd
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
(nm)
Typ
Min
Typ
TO-2013BC-MR
AlGaInP
Red
20
1.9
2.4
630
50
100
140
TO-2013BC-ME
AlGaInP
Orange
20
2
2.4
623
50
100
140
TO-2013BC-MA
AlGaInP
Amber
20
2
2.4
605
50
100
140
TO-2013BC-MY
AlGaInP
Yellow
20
2
2.4
590
50
100
140
TO-2013BC-MG
AlGaInP
Green
20
2
2.4
572
50
100
140
Part
Number
Iv(mcd)
2θ1/2
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
1.25
MOLDING BODY(LENS)
0.40
CATHODE MARK
PCB 0.40
DIE
2.0
1.20
1.0
0.40
0.90
-
Recommended soldering pattern
3.8
1.3
1.52
1.52
+
Note:
Units:mm
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
Cathode
4.0
0.2
4.0
1,75
3,50
1.3
8.0
Reel Direction
POLARITY
2,0
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2013BC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2013BC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX
ATTE NTION:
s tatic
B ri gh tnes s Code
E mi tt in g Colo r Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Part No
TO-2013BC- P / B
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-2013BC-P
105
20
TO-2013BC-B
105
20
80
-5
-35~+85
-35~+105
260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
λd
(nm)
Iv(mcd)
Typ
Min
Typ
2θ1/2
Pure
TO-2013BC-P
InGaN
Green
20
3.3
3.6
525
150
280
140
TO-2013BC-B
InGaN
Blue
20
3.3
3.6
468
150
200
140
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/5
REV：A
Prepared by：W.L.Y
Package Dimensions
1.25
MOLDING BODY(LENS)
0.40
CATHODE MARK
PCB 0.40
DIE
2.0
1.20
1.0
0.40
0.90
-
Recommended soldering pattern
3.8
1.3
1.52
1.52
+
Note:
Units:mm
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/5
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
Cathode
4.0
0.2
4.0
1,75
3,50
8.0
1.3
Reel Direction
POLARITY
2,0
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2013BC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2013BC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX
A TTE NTION:
sta tic
B rig htn ess C ode
Emitt in g Co lo rCode
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Part NO
TO-2013BY- MW
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-2013BY-MW
105
20
80
-5
-35~+85
-35~+105
260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
TO-2013BY-MW
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
InGaN
White
20
3.3
3.6
X
Y
Tpy
0.3
Iv(mcd)
2θ1/2
Min Typ
0.29 450 560
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/5
REV：A
Prepared by：W.L.Y
150
Package Dimensions
1.25
MOLDING BODY(LENS)
0.40
CATHODE MARK
PCB 0.40
DIE
2.0
1.20
1.0
0.40
0.90
-
Recommended soldering pattern
3.8
1.3
1.52
+
Note:
1.52
Units:mm
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/5
REV：A
Prepared by：W.L.Y
Chromaticity Diagram
0.35
0.34
0.33
0.9
520
0.8
A6
0.32
530
0.31
540
510
550
0.7
0.30
A4
0.29
A3
A5
560
0.6
570
0.5
500
580
0.28
A2
590
0.4
0.3
0.27
600
610
620
630
490
0.25
0.2
0.1
A1
0.26
480
0.24
470
0.8
0.34
0.7
0.33
0.6
0.32
0.5
0.31
0.4
0.30
0.3
0.29
0.2
0.28
0.1
0.27
0
0.26
0
460
Color Bins
A2
A1
X
0.280
0.268
0.278
0.288
X
0.288
0.278
0.287
0.296
Y
0.248
0.262
0.279
0.262
Y
0.262
0.279
0.295
0.276
0.296
0.276
A3
0.292
0.286
0.292
0.286
A4
0.287
0.295
0.307
0.315
0.309
0.305
0.311
0.294
A5
0.309
0.305
0.309
0.305
A6
0.307
0.315
0.330
0.339
0.330
0.329
X
Y
X
Y
0.309
0.305
0.330
0.329
0.311
0.294
0.330
0.318
X
Y
X
Y
※ Color Coordinates Measurement allowance is±0.01.
※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
Cathode
4.0
0.2
4.0
1,75
3,50
8.0
1.3
POLARITY
2,0
Reel Direction
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2013BY-XX
LOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2013BY-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX
ATTENTION:
static
Brightness Code
Emi tting Co lo r Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 5/5
REV：A
Prepared by：W.L.Y
Taiwan Oasis Chip LED Products
Package
Representative Parts
Number
Emitting
Color
Dominant
Lens
Type
Wavelength
Luminous Intensity
Viewing
Angle
IV (mcd)
at If
(mA)
2θ 1/2
Technical
Data Pdf
Chip LED 3210
TO-3210AC-MRE
Red
630
Clear
100
20
140
TO-3210AC-MYE
Yellow
590
Clear
100
20
140
TO-3210AC-MGE
Green
572
Clear
100
20
140
TO-3210AC-PF
Pure Green
525
Clear
280
20
140
TO-3210AC-BE
Blue
468
Clear
100
20
140
TO-3210AY-MWG
White
X:0.30,Y:0.29 Yellow
560
20
150
文档
Part No
TO-3210AC- MR / MY / MG
Features
1. Superior brightness with AlInGaP technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. ESD withstanding capacity up to 2 kV
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-3210AC-MR
75
20
TO-3210AC-MY
75
20
80
-5
-35~+85
-35~+105
260 / 5
TO-3210AC-MG
75
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
λd
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
(nm)
Typ
Min
Typ
TO-3210AC-MR
AlGaInP
Red
20
1.9
2.4
630
50
100
140
TO-3210AC-MY
AlGaInP
Yellow
20
2.0
2.4
590
50
100
140
TO-3210AC-MG
AlGaInP
Green
20
2.0
2.4
572
50
100
140
Part
Number
Iv(mcd)
2θ1/2
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
0.50
MOLDING
BODY(LENS)
CATHODE MARK
SOLDERING
TERMINAL
PCB
0.5
DIE
-
R0.5
0.35
1.48
+
R0.3
Recommended soldering pattern
1.59
0.28
1.59
1.0
1.01
3.2
4.95
0.28
Units：mm
Unspecified tolerance：± 0. 1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
C a th o d e
P O L A R IT Y
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3210AC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX
XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3210AC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Part NO
TO-3210AC- P / B
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-3210AC-P
105
20
TO-3210AC-B
105
20
80
-5
-35~+85
-35~+105
260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
TO-3210AC-P
InGaN
Pure
Green
TO-3210AC-B
InGaN
Blue
λd
(nm)
Iv(mcd)
Typ
Min
Typ
2θ1/2
20
3.3
3.6
525
150
280
140
20
3.3
3.6
468
50
100
140
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
0.50
MOLDING
BODY(LENS)
CATHODE MARK
SOLDERING
TERMINAL
PCB
0.5
DIE
-
R0.5
0.35
1.48
+
R0.3
Recommended soldering pattern
1.59
0.28
1.59
1.0
1.01
3.2
4.95
0.28
Units：mm
Unspecified tolerance：± 0. 1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
C a th o d e
P O L A R IT Y
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3210AC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX
XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3210AC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX
ATTENTION:
static
B rightness Code
Emitting Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Part No
TO-3210AY- MW
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
TO-3210AY-MW
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
105
20
80
-5
-35~+85
-35~+105
260 / 5
Sec
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
TO-3210AY-MW
Test
X Y
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
Typ
InGaN
White
20
3.3
Iv(mcd)
2θ1/2
Min Typ
3.6 0.3 0.29 140 280
150
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/5
REV：A
Prepared by：W.L.Y
Package Dimensions
0.50
MOLDING
BODY(LENS)
CATHODE MARK
SOLDERING
TERMINAL
PCB
0.5
DIE
-
R0.5
0.35
1.48
+
R0.3
Recommended soldering pattern
1.59
0.28
1.59
1.0
1.01
3.2
4.95
0.28
Units：mm
Unspecified tolerance ：± 0. 1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/5
REV：A
Prepared by：W.L.Y
Chromaticity Diagram
0.35
0.34
0.33
0.9
520
0.8
A6
0.32
530
0.31
540
510
550
0.7
0.30
A4
0.29
A3
A5
560
0.6
570
0.5
500
580
0.28
A2
590
0.4
0.3
0.27
600
610
620
630
490
0.25
0.2
0.1
A1
0.26
480
0.24
470
0.8
0.34
0.7
0.33
0.6
0.32
0.5
0.31
0.4
0.30
0.3
0.29
0.2
0.28
0.1
0.27
0
0.26
0
460
Color Bins
A2
A1
X
0.280
0.268
0.278
0.288
X
0.288
0.278
0.287
0.296
Y
0.248
0.262
0.279
0.262
Y
0.262
0.279
0.295
0.276
0.296
0.276
A3
0.292
0.286
0.292
0.286
A4
0.287
0.295
0.307
0.315
0.309
0.305
0.311
0.294
A5
0.309
0.305
0.309
0.305
A6
0.307
0.315
0.330
0.339
0.330
0.329
X
Y
X
Y
0.309
0.305
0.330
0.329
0.311
0.294
0.330
0.318
X
Y
X
Y
※ Color Coordinates Measurement allowance is±0.01.
※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
C a th o d e
P O L A R IT Y
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3210AY-XX
LOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX
XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3210AY-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX
ATTENTION:
static
B rightness Code
Emitt ing Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 5/5
REV：A
Prepared by：W.L.Y
Taiwan Oasis Chip LED Products
Package
Emitting
Dominant
Color
Wavelength
TO-3216BC-MRE
Red
630
TO-3216BC-MEE
Orange
TO-3216BC-MAE
Representative Parts
Number
Lens
Type
Luminous Intensity
Viewing
Angle Technical Data
Pdf
2θ 1/2
IV (mcd)
at If
(mA)
Clear
100
20
140
623
Clear
100
20
140
Amber
605
Clear
100
20
140
TO-3216BC-MYE
Yellow
590
Clear
100
20
140
TO-3216BC-MGE
Green
572
Clear
100
20
140
TO-3216BC-PF
Pure Green
525
Clear
280
20
140
TO-3216BC-BF
Blue
468
Clear
200
20
140
TO-3216BY-MWF
White
X:0.30,Y:0.29 Yellow
280
20
160
Chip LED 3216（1206）
文档
文档
Part No
TO-3216BC- MR / ME / MA / MY / MG
Features
1. Superior brightness with AlInGaP technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. ESD withstanding capacity up to 2 kV
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-3216BC-MR
75
20
TO-3216BC-ME
75
20
TO-3216BC-MA
75
20
80
-5
-35~+85
-35~+105
260 / 5
TO-3216BC-MY
75
20
TO-3216BC-MG
75
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
λd
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
(nm)
Typ
Min
Typ
TO-3216BC-MR
AlGaInP
Red
20
1.9
2.4
630
50
100
140
TO-3216BC-ME
AlGaInP
Orange
20
2.0
2.4
623
50
100
140
TO-3216BC-MA
AlGaInP
Amber
20
2.0
2.4
605
50
100
140
TO-3216BC-MY
AlGaInP
Yellow
20
2.0
2.4
590
50
100
140
TO-3216BC-MG
AlGaInP
Green
20
2.0
2.4
572
50
100
140
Part
number
Iv(mcd)
2θ1/2
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
3,2
0,5
0,5
1,6
0,5
Emisson center
2
3,2
Cathode mark
5
9
.
4
Recommended soldering pattern
PCB
5
0
,
1
9
5
.
1
9
5
.
1
6
.
1
Epoxy resin
Units:mm
Unspecified tolerance:㊣0.1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4 .0
4 .0
0 .2
1 .5
CATHODE
1 .7 5
3 .5
8 .0
1 .1
1 .3
P O L A R IT Y
2 .0
R E E L D IR E C T IO N
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3216BC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3216BC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
ATTENTION:
static
B rightnes s Code
Em itting Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Part No
TO-3216BC- P / B
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-3216BC-P
105
20
TO-3216BC-B
105
20
80
-5
-35~+85
-35~+105
260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
TO-3216BC-P
InGaN
Pure
Green
TO-3216BC-B
InGaN
Blue
λd
(nm)
Iv(mcd)
Typ
Min
Typ
2θ1/2
20
3.3
3.6
525
150
280
120
20
3.3
3.6
468
150
200
120
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
3,2
0,5
0,5
1,6
0,5
Emisson center
2
3,2
Cathode mark
5
9
.
4
Recommended soldering pattern
PCB
5
0
,
1
9
5
.
1
9
5
.
1
6
.
1
Epoxy resin
Units:mm
Unspecified tolerance:㊣0.1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4 .0
4 .0
0 .2
1 .5
CATHODE
1 .7 5
3 .5
8 .0
1 .1
1 .3
P O L A R IT Y
2 .0
R E E L D IR E C T IO N
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3216BC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3216BC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Em itting Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Part No
TO-3216BY- MW
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-3216BY-MW
105
20
80
-5
-35~+85
-35~+105
260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
TO-3216BY-MW
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
InGaN
White
20
3.3
3.6
X
Typ
Y
Iv(mcd)
Min
Typ
0.3 0.29 150 280
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
2θ1/2
Page 1/5
REV：A
Prepared by：W.L.Y
160
Package Dimensions
3,2
0,5
0,5
1,6
0,5
Emisson center
2
3,2
Cathode mark
5
9
.
4
Recommended soldering pattern
PCB
5
0
,
1
9
5
.
1
9
5
.
1
6
.
1
Epoxy resin
Units:mm
Unspecified tolerance:㊣0.1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/5
REV：A
Prepared by：W.L.Y
Chromaticity Diagram
0.35
0.34
0.33
0.9
520
0.8
A6
0.32
530
0.31
540
510
550
0.7
0.30
A4
0.29
A3
A5
560
0.6
570
0.5
500
580
0.28
A2
590
0.4
0.3
0.27
600
610
620
630
490
0.25
0.2
0.1
A1
0.26
480
0.24
470
0.8
0.34
0.7
0.33
0.6
0.32
0.5
0.31
0.4
0.30
0.3
0.29
0.2
0.28
0.1
0.27
460
0
0.26
0
Color Bins
A2
A1
X
0.280
0.268
0.278
0.288
X
0.288
0.278
0.287
0.296
Y
0.248
0.262
0.279
0.262
Y
0.262
0.279
0.295
0.276
0.296
0.276
A3
0.292
0.286
0.292
0.286
A4
0.287
0.295
0.307
0.315
0.309
0.305
X
0.311
A5
0.309
0.330
0.330
Y
0.294
0.305
0.329
0.318
0.309
0.305
A6
0.307
0.315
0.330
0.339
0.330
0.329
X
Y
0.309
0.305
0.311
0.294
X
Y
X
Y
※ Color Coordinates Measurement allowance is±0.01.
※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4 .0
4 .0
0 .2
1 .5
CATHODE
1 .7 5
3 .5
8 .0
1 .1
1 .3
P O L A R IT Y
2 .0
R E E L D IR E C T IO N
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3216BY-XX
LOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3216BY-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 5/5
REV：A
Prepared by：W.L.Y
Taiwan Oasis Side View LED Products
Package
Representative Parts
Number
Emitting
Dominant
Color
Wavelength
Lens
Type
Luminous Intensity
IV (mcd)
at If
(mA)
670
20
Viewing
Angle Technical Data
Pdf
2θ 1/2
Side View LED 2808
TO-2808SY-MWG
White
X:0.30,Y:0.29 Yellow
115
Part No
TO-2808SY- MW
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-2808SY-MW
105
20
-5
-35~+85
-35~+105
260 / 5
80
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
TO-2808SY-MW
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
InGaN
White
20
3.3
3.6
X
Typ
Y
Iv(mcd)
2θ1/2
Min Typ
0.3 0.29 400 670
140
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Chromaticity Diagram
0.35
0.34
0.33
0.9
520
0.8
A6
0.32
530
0.31
540
510
550
0.7
0.30
A4
0.29
A3
A5
560
0.6
570
0.5
500
580
0.28
A2
590
0.4
0.3
0.27
600
610
620
630
490
0.25
0.2
0.1
A1
0.26
480
0.24
470
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
0.8
Prepared Date：
2006/09/28
0.34
0.7
0.33
0.6
0.32
0.5
0.31
0.4
0.30
0.3
0.29
0.2
0.28
0.1
0.27
0
0.26
0
460
Page 2/4
REV：A
Prepared by：W.L.Y
Color Bins
A2
A1
X
0.280
0.268
0.278
0.288
X
0.288
0.278
0.287
0.296
Y
0.248
0.262
0.279
0.262
Y
0.262
0.279
0.295
0.276
0.296
0.276
A3
0.292
0.286
0.292
0.286
A4
0.287
0.295
0.307
0.315
0.309
0.305
0.311
0.294
A5
0.309
0.305
0.309
0.305
A6
0.307
0.315
0.330
0.339
0.330
0.329
X
Y
X
Y
0.309
0.305
0.330
0.329
0.311
0.294
0.330
0.318
X
Y
X
Y
※ Color Coordinates Measurement allowance is±0.01.
※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Taiwan Oasis Side View LED Products
Package
Representative Parts
Number
Emitting
Dominant
Color
Wavelength
Lens
Type
Luminous Intensity
IV (mcd)
at If
(mA)
800
20
Viewing
Angle Technical Data
Pdf
2θ 1/2
Side View LED 2810
TO-2810SY-MWG
White
X:0.30,Y:0.29 Yellow
120
Part No
TO-2810SY- MW
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-2810SY-MW
105
20
-5
-35~+85
-35~+105
260 / 5
80
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
TO-2810SY-MW
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
InGaN
White
20
3.3
3.6
X
Typ
Y
Iv(mcd)
2θ1/2
Min Typ
0.3 0.29 400 800
120
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/5
REV：A
Prepared by：W.L.Y
Package Dimensions
Cathode mark
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Chromaticity Diagram
0.35
0.34
0.33
0.9
520
0.8
A6
0.32
530
0.31
540
510
550
0.7
0.30
A4
0.29
A3
A5
560
0.6
570
0.5
500
580
0.28
A2
590
0.4
0.3
0.27
600
610
620
630
490
0.25
0.2
0.1
A1
0.26
480
0.24
470
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
0.8
Prepared Date：
2006/09/28
0.34
0.7
0.33
0.6
0.32
0.5
0.31
0.4
0.30
0.3
0.29
0.2
0.28
0.1
0.27
0
0.26
0
460
Page 2/5
REV：A
Prepared by：W.L.Y
Color Bins
A2
A1
X
0.280
0.268
0.278
0.288
X
0.288
0.278
0.287
0.296
Y
0.248
0.262
0.279
0.262
Y
0.262
0.279
0.295
0.276
0.296
0.276
A3
0.292
0.286
0.292
0.286
A4
0.287
0.295
0.307
0.315
0.309
0.305
0.311
0.294
A5
0.309
0.305
0.309
0.305
A6
0.307
0.315
0.330
0.339
0.330
0.329
X
Y
X
Y
0.309
0.305
0.330
0.329
0.311
0.294
0.330
0.318
X
Y
X
Y
※ Color Coordinates Measurement allowance is±0.01.
※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2810SY-XX
LOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX XX
ATTENTION:
static
FORWARD VOLTAGE
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2810SY-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX XX
ATTENTION:
static
FORWARD VOLTAGE
B rightness Code
Emitting Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 5/5
REV：A
Prepared by：W.L.Y
Taiwan Oasis Side View LED Products
Package
Emitting
Dominant
Color
Wavelength
TO-2908SC-MRE
Red
630
TO-2908SC-MGE
Green
TO-2908SC-PF
Representative Parts
Number
Lens
Type
Luminous Intensity
Viewing
Angle Technical Data
Pdf
2θ 1/2
IV (mcd)
at If
(mA)
Clear
100
20
120
572
Clear
100
20
120
Pure Green
525
Clear
280
20
120
TO-2908SC-BE
Blue
468
Clear
100
20
120
TO-2908SY-MWG
White
280
20
120
Side View LED 2908
X:0.30,Y:0.29 Yellow
Part No
TO-2908SC- MR / MG
Features
1. Superior brightness with AlInGaP technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. ESD withstanding capacity up to 2 kV
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-2908SC-MR
75
20
TO-2908SC-MG
75
20
80
-5
-35~+85
-35~+105
260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
λd
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
(nm)
Typ
Min
Typ
TO-2908SC-MR
AlGaInP
Red
20
1.9
2.4
630
50
100
120
TO-2908SC-MG
AlGaInP
Green
20
2.0
2.4
572
50
100
120
Part
Number
Iv(mcd)
2θ1/2
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
Cathode mark
Recommended soldering pattern
Umit:mm
Unspecified tolerance:㊣0.1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2908SC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX XX
ATTENTION:
static
FORWARD VOLTAGE
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2908SC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX XX
ATTE NTION:
static
FORWARD VOLTAGE
B right ness Code
Emitt ing Colo r Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Part NO
TO-2908SC- P / B
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-2908BC-P
105
20
TO-2908BC-B
105
20
80
-5
-35~+85
-35~+105
260 / 5
Sec
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
TO-2908BC-P
InGaN
Pure
Green
TO-2908BC-B
InGaN
Blue
λd
(nm)
Iv(mcd)
Typ
Min
Typ
2θ1/2
20
3.3
3.6
525
140
280
120
20
3.3
3.6
468
50
100
120
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
Cathode mark
Recommended soldering pattern
Umit:mm
Unspecified tolerance:㊣0.1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2908SC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX XX
ATTENTION:
static
FORWARD VOLTAGE
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2908SC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX XX
ATTENTION:
s tatic
F OR WA RD V OLTAGE
Br ig htne ss Code
E mittin g Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Part No
TO-2908SY- MW
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-2908SY-MW
105
20
-5
-35~+85
-35~+105
260 / 5
80
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
TO-2908SY-MW
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
InGaN
White
20
3.3
3.6
X
Typ
Y
Iv(mcd)
2θ1/2
Min Typ
0.3 0.29 150 280
120
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/6
REV：A
Prepared by：W.L.Y
Package Dimensions
Cathode mark
Recommended soldering pattern
Umit:mm
Unspecified tolerance:㊣0.1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/6
REV：A
Prepared by：W.L.Y
Chromaticity Diagram
0.35
0.34
0.33
0.9
520
0.8
A6
0.32
530
0.31
540
510
550
0.7
0.30
A4
0.29
A3
A5
560
0.6
570
0.5
500
580
0.28
A2
590
0.4
0.3
0.27
600
610
620
630
490
0.25
0.2
0.1
A1
0.26
480
0.24
470
0.8
0.34
0.7
0.33
0.6
0.32
0.5
0.31
0.4
0.30
0.3
0.29
0.2
0.28
0.1
0.27
0
0.26
0
460
A2
A1
X
0.280
0.268
0.278
0.288
X
0.288
0.278
0.287
0.296
Y
0.248
0.262
0.279
0.262
Y
0.262
0.279
0.295
0.276
0.296
0.276
A3
0.292
0.286
0.292
0.286
A4
0.287
0.295
0.307
0.315
0.309
0.305
0.311
0.294
A5
0.309
0.305
0.309
0.305
A6
0.307
0.315
0.330
0.339
0.330
0.329
X
Y
X
Y
0.309
0.305
0.330
0.329
0.311
0.294
0.330
0.318
X
Y
X
Y
Color Bins
※ Color Coordinates Measurement allowance is±0.01.
※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/6
REV：A
Prepared by：W.L.Y
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/6
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2908SY-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX XX
ATTENTION:
static
FORWARD VOLTAGE
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-2908SY-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE:
XX XX XX
ATTENTION:
static
FORWARD VOLTAGE
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 5/6
REV：A
Prepared by：W.L.Y
Taiwan Oasis TOP LED Products
Emitting
Dominant
Color
Wavelength
TO-3228BC-MRF
Red
630
TO-3228BC-MAF
Amber
TO-3228BC-MEF
Representative Parts
Number
Package
Lens
Type
Luminous Intensity
Viewing
Angle Technical Data
Pdf
2θ 1/2
IV (mcd)
at If
(mA)
Clear
200
20
140
605
Clear
280
20
140
Orange
623
Clear
280
20
140
TO-3228BC-MYF
Yellow
590
Clear
280
20
140
TO-3228BC-MGE
Green
572
Clear
100
20
140
TO-3228BC-PG
Pure Green
525
Clear
800
20
140
TOPLED 3228 (1210) PLCC II
文档
TO-3228BC-BF
Blue
TO-3228BY-MWH-E
White
468
Clear
X:0.30,Y:0.29 Yellow
230
20
140
280
20
120
100
20
120
100
20
120
100
20
120
100
20
120
280
20
120
TOPLED 3228 (1210) PLCC IV Bi-Color
Red
630
TO-3228 BC-MRMGEE
Clear
Green
572
Red
630
TO-3228 BC-MRBEE
Clear
Blue
468
Red
630
TO-3228 BC-MRPFF
Clear
Pure Green
525
280
20
120
Red
630
200
20
120
500
20
120
TOPLED 3228 (1210) PLCC IV RGB
TO-3228BC-MRPBFGE Pure Green
525
Clear
Blue
468
80
20
120
Orange
623
280
20
120
660
20
120
100
20
120
TO-3228BC-MEPBFGE Pure Green
Blue
525
468
Clear
文档
Part NO
TO-3228 BC- MR / ME / MA / MY / MG
Features
1. Superior brightness with AlInGaP technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. ESD withstanding capacity up to 2 kV
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-3228BC-MR
75
20
TO-3228BC-ME
75
20
TO-3228BC-MA
75
20
80
-5
-35~+85
-35~+105
260 / 5
TO-3228BC-MY
75
20
TO-3228BC-MG
75
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
λd
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
(nm)
Typ
Min
Typ
TO-3228BC-MR
AlGaInP
Red
20
1.9
2.4
630
150
200
140
TO-3228BC-ME
AlGaInP
Orange
20
2.0
2.4
623
150
280
140
TO-3228BC-MA
AlGaInP
Amber
20
2.0
2.4
605
150
280
140
TO-3228BC-MY
AlGaInP
Yellow
20
2.0
2.4
590
150
280
140
TO-3228BC-MG
AlGaInP
Green
20
2.0
2.4
572
50
100
140
Part
Number
Iv(mcd)
2θ1/2
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/5
REV：A
Prepared by：W.L.Y
Package Dimensions
2,8
0,9
3,2
3,5
Cathode mark
0,95
1,9
Recommended soldering pattern
Soldering area
Divice center
0,2
8
,
2
3
4
,
3
Note:
Units:mm
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/5
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
C a th o d e
0 .2
4 .0
4 .0
1 .7 5
3 .5
8 .0
MA
X.
5∼
3 .8
P O L A R IT Y
2 .2
2 .0
R e e l D ire c tio n
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3228BC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:2000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3228BC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:2000PCS
BIN CODE:
XX XX
ATTENTION:
static
Bri ghtness Code
Emitt ing Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Part NO
TO-3228BY- P/B
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-3228BC-P
105
20
TO-3228BC-B
105
20
80
-5
-35~+85
-35~+105
260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
λd
(nm)
Iv(mcd)
Typ
Min
Typ
2θ1/2
Prue
TO-3228BC-P
InGaN
Green
20
3.3
3.6
525
420
800
140
TO-3228BC-B
InGaN
Blue
20
3.3
3.6
468
150
230
140
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
Package Dimensions
2,8
0,9
3,2
3,5
Cathode mark
0,95
1,9
Recommended soldering pattern
Soldering area
Divice center
0,2
8
,
2
3
4
,
3
Note:
Units:mm
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
C a th o d e
0 .2
4 .0
4 .0
1 .7 5
3 .5
8 .0
MA
X.
5∼
3 .8
2 .2
2 .0
R e e l D ire c tio n
P O L A R IT Y
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3228BC-XX
LOT NO:LEZXX XX XXXX
QUANTITY:2000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3228BC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:2000PCS
BIN CODE:
XX XX
ATTENTION:
static
Bri ghtness Code
Emi tt ing Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Part NO
TO-3228BY- MW
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-3228BY-MW
105
20
80
-5
-35~+85
-35~+105
260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
TO-3228BY-MW
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
InGaN
White
20
3.3
3.6
X
Y
Typ
Iv(mcd)
2θ1/2
Min Typ
0.3 0.29 150 280
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/6
REV：A
Prepared by：W.L.Y
120
Package Dimensions
2,8
0,9
3,2
3,5
Cathode mark
0,95
1,9
Recommended soldering pattern
Soldering area
Divice center
0,2
8
,
2
3
4
,
3
Note:
Units:mm
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/6
REV：A
Prepared by：W.L.Y
Chromaticity Diagram
0.35
0.34
0.33
0.9
520
0.8
A6
0.32
530
0.31
540
510
550
0.7
0.30
A4
0.29
A3
A5
560
0.6
570
0.5
500
580
0.28
A2
590
0.4
0.3
0.27
600
610
620
630
490
0.25
0.2
0.1
A1
0.26
480
0.24
470
0.8
0.34
0.7
0.33
0.6
0.32
0.5
0.31
0.4
0.30
0.3
0.29
0.2
0.28
0.1
0.27
0
0.26
0
460
Color Bins
A2
A1
X
0.280
0.268
0.278
0.288
X
0.288
0.278
0.287
0.296
Y
0.248
0.262
0.279
0.262
Y
0.262
0.279
0.295
0.276
0.296
0.276
A3
0.292
0.286
0.292
0.286
A4
0.287
0.295
0.307
0.315
0.309
0.305
0.311
0.294
A5
0.309
0.305
0.309
0.305
A6
0.307
0.315
0.330
0.339
0.330
0.329
X
Y
X
Y
0.309
0.305
0.330
0.329
0.311
0.294
0.330
0.318
X
Y
X
Y
※ Color Coordinates Measurement allowance is±0.01.
※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/6
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/6
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
C a th o d e
0 .2
4 .0
4 .0
1 .7 5
3 .5
8 .0
MA
X.
5∼
3 .8
P O L A R IT Y
2 .2
2 .0
R e e l D ire c tio n
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3228BY-XX
LOT NO:LEZXX XX XXXX
QUANTITY:2000PCS
BIN CODE: XX XX
ATTENTION:
static
Brightness Code
Emitting Color Code
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3228BY-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:2000PCS
BIN CODE:
XX XX
ATTENTION:
static
B right ness Code
Emitting Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 5/6
REV：A
Prepared by：W.L.Y
Part NO
TO-3228BC- MRMG / MRB / MRP
Features
1. Superior brightness with AlInGaP/ InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
number
TO-3228BC-MRMG
TO-3228BC-MRB
TO-3228BC-MRP
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
75
20
75
20
75
20
105
20
80
-5
-35~+85
-35~+105
260 / 5
Sec
75
20
105
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
number
Test
Dice
Emitting Conditi
Technical
color
on
Vf(V)
If (mA) Typ Max
TO-3228BC-MRMG
TO-32286BC-MRB
TO-3228BC-MRP
AlInGaP
Red
AlInGaP
Green
AlInGaP
Red
InGaN
Blue
AlInGaP
Amber
InGaN
Prue Green
20
20
20
λd
(nm)
Iv(mcd)
Typ
Min
Typ
1.9
2.0
630
50
100
2.0
2.4
572
50
100
2.0
2.4
630
50
100
3.3
3.6
468
50
100
2.0
2.4
630
140
280
3.3
3.6
525
140
280
2θ1/2
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/5
REV：A
Prepared by：W.L.Y
120
120
120
Package Dimensions
3
1
2
3
4
4
8
,
2
9
,
0
5
,
3
2
,
3
5
9
,
0
9
,
1
MR MG
2
1
Recommended soldering pattern
Soldering area
Divice center
2
,
0
8
,
0
8
,
2
2
,
2
3
4
,
3
Umit:mm
Unspecified tolerance:㊣0.1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/5
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/5
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0 .2
4 .0
4 .0
1 .7 5
3 .5
8 .0
M
AX
.5 ∼
3 .8
2 .2
2 .0
R e e l D ir e c t io n
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3228BC-XXXX
LOT NO:LEZ XX XX XXX
QUANTITY:2000PCS
BIN CODE: X X
XX
ATTENTION:
static
Green Color Brightness
Amber Color Brightness
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-3228BC-XXXX
LOT NO:LEZ XX XX XXX
QUANTITY:2000PCS
BIN CODE:
XX XX
ATTENTION:
static
Green Color B rightness
Amber Color B rightness
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/5
REV：A
Prepared by：W.L.Y
Part No
TO-3228BC- MRPB / MEPB
Features
1. Superior brightness with AlInGaP/ InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
TO-3228BC-MRPB
TO-3228BC-MEPB
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
75
20
105
20
105
20
75
20
80
-5
-35~+85
-35~+105
260 / 5
105
20
105
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
Test
Dice
Emitting Conditi
Technical
color
on
Vf(V)
If (mA) Typ Max
AlInGaP
TO-3228BC-MRPB
TO-3228BC-MEPB
InGaN
Red
Pure Green
20
λd
(nm)
Iv(mcd)
Typ
Min
Typ
1.9
2.0
630
150
200
3.3
3.6
525
450
500
InGaN
Blue
3.3
3.6
468
30
80
AlInGaP
Orange
2.0
2.4
623
150
280
InGaN
Pure Green
3.3
3.6
525
420
660
InGaN
Blue
3.3
3.6
468
50
100
20
2θ1/2
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
120
120
Package Dimensions
B3
E
M1
/
R
M
3
5
,
3
P2
8
,
2
4
9
,
0
2
,
3
4
5
9
,
0
9
,
1
2
1
Recommended soldering pattern
Soldering area
Divice center
2
,
0
8
,
0
8
,
2
2
,
2
3
4
,
3
Note:
Units:mm
Unspecified tolerance:㊣0.1
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0 .2
4 .0
4 .0
1 .7 5
3 .5
M
8 .0
AX
.5 ∼
3 .8
R e e l D ir e c t io n
2 .2
2 .0
PART NO:TO-3228BC-XXXXXX
LOT NO:LEZ XX XX XXX
QUANTITY:2000PCS
BIN CODE: X
X
X
ATTENTION:
static
Blue Brightness
Green Color Brightness
Red Color Brightness
DATE:YY/MM/DD X
PART NO:TO-3228BC-XXXXXX
LOT NO:LEZ XX XX XXX
QUANTITY:2000PCS
BIN CODE:
X X X
ATTENTION:
static
Blue Bright ness
Green Brigh tness
Red Brig htness
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y
Taiwan Oasis TOP LED Products
Package
Representative Parts
Number
Emitting
Dominant
Color
Wavelength
Lens
Type
Luminous Intensity
Viewing
Angle Technical Data Pdf
IV (mcd) at If (mA) 2θ 1/2
TOPLED 5050 White
TO-5050BY-3MWM
White
X:0.30,Y:0.29 Yellow
Red
630
TO-5050BC-MRPBFGF
Pure Green
525
Blue
468
1700
20
140
280
20
110
670
20
110
280
20
110
280
20
110
670
20
110
280
20
110
TOPLED 5050 RGB
TO-5050BC-MEPBFGF
Orange
623
Pure Green
525
Blue
468
Clear
Clear
Part No
TO-5050BY- 3MW
Features
1. Superior brightness with InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
Number
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
TO-5050BC-3MW
105
20
80
-5
-35~+85
-35~+105
260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
Number
TO-5050BC-3MW
Test
Dice
Emitting
Vf(V)
Condition
Technical color
If (mA) Typ Max
InGaN
White
20
3.3
3.6
X
Y
Typ
Iv(mcd)
2θ1/2
Min Typ
0.3 0.29 800 1700
*Luminous Intensity measurement allowance is ±15%.
*Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/6
REV：A
Prepared by：W.L.Y
140
Package Dimensions
5. 0
CATHODE MARK C1.0
6
2
5
3
4
5. 0
1
1
2
3
0, 2
Recommended soldering pattem
2,4
5,4
5
4
3
3
Units:mm
Unspecified tolerance:± 0. 1
6.4
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/6
REV：A
Prepared by：W.L.Y
Chromaticity Diagram
0.35
0.34
0.33
0.9
520
0.8
A6
0.32
530
0.31
540
510
550
0.7
0.30
A4
0.29
A3
A5
560
0.6
570
0.5
500
580
0.28
A2
590
0.4
0.3
0.27
600
610
620
630
490
0.25
0.2
0.1
A1
0.26
480
0.24
470
0.8
0.34
0.7
0.33
0.6
0.32
0.5
0.31
0.4
0.30
0.3
0.29
0.2
0.28
0.1
0.27
0
0.26
0
460
Color Bins
A2
A1
X
0.280
0.268
0.278
0.288
X
0.288
0.278
0.287
0.296
Y
0.248
0.262
0.279
0.262
Y
0.262
0.279
0.295
0.276
0.296
0.276
A3
0.292
0.286
0.292
0.286
A4
0.287
0.295
0.307
0.315
0.309
0.305
0.311
0.294
A5
0.309
0.305
0.309
0.305
A6
0.307
0.315
0.330
0.339
0.330
0.329
X
Y
X
Y
0.309
0.305
0.330
0.329
0.311
0.294
0.330
0.318
X
Y
X
Y
※ Color Coordinates Measurement allowance is±0.01.
※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
REV：A
Page 3/6
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
REV：A
Page 4/6
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4 .0 0
2 .0 0
? 1 .5 0
1 .7 5
2 .3 0
5∼
5 .5 0
1 2 .0 0
5 .3 0
? 1 .5 0
8 .0 0
7∼
5 .3 0
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-5050BY-3XX
LOT NO:LEZXX XX XXXX
QUANTITY:1000PCS
BIN CODE:
XX XX
ATT EN TION:
static
E mi tt ing Color Code
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
REV：A
Page 5/6
Prepared by：W.L.Y
Part No
TO-5050BC- MRPB / MEPB
Features
1. Superior brightness with AlInGaP/ InGaN technology
2. Ideal for automated SMT process
3. Excellent reliability profile
4. High ESD withstanding capacity
5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Part
number
TO-5050BC-MRPB
TO-5050BC-MEPB
Pd
If
Ifp*1
Vr
Top
Tstg
Tsol
mW
mA
mA
V
℃
℃
℃ / Sec
75
20
105
20
105
20
75
20
80
-5
-35~+85
-35~+105
260 / 5
105
20
105
20
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Part
number
Test
Dice
Emitting Conditi
Technical
color
on
Vf(V)
If (mA) Typ Max
AlInGaP
TO-5050BC-MRPB
TO-5050BC-MEPB
InGaN
Red
Pure Green
20
λd
(nm)
Iv(mcd)
Typ
Min
Typ
1.9
2.4
630
140
280
3.3
3.6
525
400
670
140
280
InGaN
Blue
3.3
3.6
468
AlInGaP
Orange
2.0
2.4
623
140
280
InGaN
Pure Green
3.3
3.6
525
400
670
InGaN
Blue
3.3
3.6
468
140
280
20
2θ1/2
*Luminous Intensity measurement allowance is ±15%.
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 1/4
REV：A
Prepared by：W.L.Y
110
110
*Wave length: the typical accuracy is ±2nm.
Package Dimensions
5. 0
5. 0
ANODE MARK C1. 0
0, 2
± 0. 1
Note:
1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 2/4
REV：A
Prepared by：W.L.Y
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 3/4
REV：A
Prepared by：W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4 .0 0
2 .0 0
? 1 .5 0
1 .7 5
2 .3 0
5∼
5 .5 0
1 2 .0 0
5 .3 0
? 1 .5 0
8 .0 0
7∼
5 .3 0
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-5050BC-XXXXXX
LOT NO:LEZ XX XX XXXX
QUANTITY:1000PCS
BIN CODE: XX XX XX
ATTENTION:
static
Blue Color Brightness
Green Color Brightness
Red Color Brightness
DATE:YY/MM/DD X
TAIWAN OASIS TECHNOLOGY CO.,LTD
PART NO:TO-5050BC-XXXXXX
LOT NO:LEZ XX XX XXXX
QUANTITY:1000PCS
BIN CODE: XX XX XX
ATTENTION:
static
B lue Color Brig htness
Green C olor Brightness
R ed Color Brightness
DATE:YY/MM/DD X
250
李洲科技股份有限公司
TAIWAN OASIS TECHNOLOGY CO.,LTD
Prepared Date：
2006/09/28
Page 4/4
REV：A
Prepared by：W.L.Y