LED
Recessed
Lighting
Energy saving RECESSED LED Lighting for new construction, retrofit and remodel
About LED
WHAT
WHY
is LED
•
USE LED
•
A light-emitting diode (LED) is a semiconductor device that emits visible light when
an electric current passes through it. It's sometimes also called a solid state device.
Exceptionally long life More than 25x longer than incandescent and 5x longer
than CFL
• Energy efficiency The future of lighting is higher-efficiency products with lower
energy consumption levels
• Meets California Title 22 requirements Unlike fluorescent lamps, LEDs contain
no mercury
•
Progress LEDs Emit no UV Decreases fading of fabrics and other materials
LEDs run cooler than incandescent or fluorescent light sources
This significantly lowers the impact on the HVAC load of a building
•
•
LEDs operate efficiently at cool temperatures Unlike fluorescents, Progress LED
products operate down to -40°C.
LED: Saves $ on Energy Costs
•
One Progress 6" LED recessed operating for
50,000 hrs uses $66 of energy.
•
One 6" incandescent recessed with a 65W lamp
operating for 50,000 hrs uses $358 of energy.
•
Progress 6" LED saves $292 compared to an
incandescent after 50,000 hrs of operation.
$358
incandescent
energy cost
$66
LED
energy cost
Incandescent
LED
(Savings after 50,000 hours of operation at 0.11/kwh)
Cost for 50,000 hours of operation at 0.11/kwh
LED: Recessed Lighting Facts
Recessed downlights are among the most popular lighting
fixtures for new and remodeled homes. As the facts below
illustrate, the use of LED recessed fixtures would create
tremendous savings on energy and maintenance costs in
both new and remodel applications.
35
residential
new homes have more than 20 recessed
downlights.
• Typical
30
estimated 350 million recessed downlights are
currently installed in U.S. homes. An estimated
20 million are sold each year. Source: Pacific Northwest
• An
25
National Laboratory (PNNL).
20
LED: Greater Life
15
• LEDs
last 50,000 hours at 70% lumen
maintenance under normal usage.
(Over 70% of the initial light output is
maintained at 50,000 hours.)
commercial
10
residential
• LEDs
will continue to operate well past
50,000 hours, but will gradually dim
over time.
typical fluorescent lasts from 6,000 to
12,000 hours, and an incandescent only
800 to 2,000 hours.
1.4 yrs commercial
0.46 yrs
(Usage per day: residential - 4 hrs,
commercial - 12 hrs)
Incandescent
Fluorescent
LED
published
2,000 hour life
published
12,000 hour life
50,000 hour life
residential
commercial
8.2
yrs
2.7
yrs
34
yrs
11.4
yrs
Years of life
• A
5
progresslighting.com | 1
State-of-the-Art Technology
WHY Progress LED Recessed
High Lumen Output
The P8071 6" trim has lumen output and distribution comparable
to a 65W BR30 incandescent lamp.
Long Life
Anticipated life is 50,000 hours. This is based on 70% lumen
maintenance. An average incandescent has a life of 800-2,000
hours and the average CFL 6,000-12,000 hours.
Warm White Color
Significant increases in efficacy and warm white color
consistency. Available in both warm white 2700K (incandescent)
and 3500K (halogen) color temperatures.
Color Temperature
Color temperature is measured in degrees
Kelvin and describes the visual warmth
or coolness of light. Numerically high color
temperatures have visually cool (blue)
appearance and vice versa.
7000
Uniform overcast sky
Daylight fluorescent
6000
Clear mercury
Clear metal halide
5000
5000k fluorescent
Avg. noon sunlight
Coated metal halide
4500
Coated mercury
Cool white fluorescent
4100k fluorescent
4000
3500
Sunlight 1 hr after sunrise
3500k Progress LED/3500k fluorescent
White fluorescent
Tungsten halogen
3000
Warm white fluorescent
3000k fluorescent
Standard incandescent
2500
2000
Degrees
Kelvin
2700k Progress LED/2700k fluorescent
High pressure sodium
Sunlight at sunrise
Candle flame
2 | progresslighting.com
Superior Dimming
Dimmable to 20 percent of full output
on 3-wire low voltage electronic dimmer
switches. Most self-ballasted CFLS are not
dimmable at all.
Aesthetic Appeal
Acrylic lens diffuses the diode light source
to effectively create a single visible source.
Regressed reflector and minimal optical
aperture create significantly reduced glare,
resulting in improved quality of light.
New Construction, Remodel and Retrofit
Options for New
Construction, Remodel
and Retrofit
Intended for use in both new construction and remodel applications.
Easy installation and UL classification for use with Progress and competitors
recessed cans make Progress LED trims ideal for retrofitting.
Quick-Link Solutions for
Title 24 Applications
Quick-Link (QL) trims comply with California Title 24 requirements for
providing a plug-in power connector in place of a screw shell socket.
Progress LED Quick-Link trims are designed to comply with building codes,
including California Title 24, where use of screw shell sockets is restricted.
Quick-Link trims are compatible with correlated Quick-Link housings from
Progress Lighting.
Compatible with Competitive Progress LED standard trims are UL classified for use with many competitive
recessed cans, including models from Capri, Commercial Electric, Emerald,
Recessed Housings
Elco, Halo, Intense, Jimway, Juno, Luminaire, LumaPro, Lithonia, Nora,
Sea Gull, and WAC. See pages 4 and 5 for a list of specific models.
LED Recessed Trim Anatomy
Screw shell
socket adapter
Class II LED Driver
120V input, 50/60 hz
Circuit board
with 9 high
brightness LEDs
Upper and
lower die cast
heat sinks
Friction spring
Integral
flange
High transmissive
diffuser
High efficiency,
low glare die cast
reflector
progresslighting.com | 3
6" and 4" LED Trims
Introducing P8071 6" & P8026 4" LED Trims
Single Solution Trims These LED trims are ideal for both new and
remodel residential and light commercial construction
Easy installation with (3) friction spring clips.
Universal screw shell lamp adapter Compatible with many
competitive recessed housings. (See chart below.)
High Lumen output P8071 6" trims are comparable to a 65w BR30
incandescent lamp. P8026 4" trims are comparable to a 50w R20
incandescent lamp.
Superior dimming capabilities When used with 3-wire low
voltage electronic dimmers, these trims feature gradual dimming to
20% of full light output through the dimmer's full range.
Aesthetic Appeal Acrylic lens diffuses LEDs, effectively creating
a single visible source.
Regressed reflector and minimal optical aperture create
significantly reduced glare resulting in improved quality of light.
P8071 6" LED Trims: IC/Non-IC, New Construction & Remodel
P8071-20 Antique Bronze, 2700K color temp
P8071-20/35K Antique Bronze, 3500K color
temp
P8071-121 Metallic Silver, 2700K color temp
P8071-121/35K Metallic Silver, 3500K color
temp
6" P8071-28 & P8071-28/35K
Housing Compatability Matrix
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FEATURES
9 LED (Light Emitting Diode) lamps included
12-watt input power
Lumen output: 584 lumens (3500K),
502 lumens (2700K)
Lumen output and distribution comparable
to a 65w BR30 incandescent lamp
CRI is 73
50,000 hours life based on 70% lumen
maintenance
Lamp contains no mercury, meets California
Title 22 requirements
Dimmable using most 3-wire low voltage
electronic dimmers
Die cast heat sink to maximize life
expectancy and lumen output
Optically controlled LED beam spread
Excellent glare control and optical cutoff
Frosted acrylic lens controls direct glare
cULus listed for wet locations
See chart for housing compatibility
Partial list of Progress and competitor housings
compatible with 6" Progress LED trims
P8071-28 White, 2700K color temp
P8071-28/35K White, 3500K color temp
P8071-31 Black, 2700K color temp
P8071-31/35K Black, 3500K color temp
P8071-36 Chestnut, 2700K color temp
P8071-36/35K Chestnut, 3500K color temp
12W 6" recessed LED trim
Smooth lensed trim with integral flange
Output: 502 lm (2700K), 584 lm (3500K)
UL/CUL classified for wet locations
Dimensions: 5" ht., 7-3/4" overall dia.
4 | progresslighting.com
Manufacturer
Part Number
Capri
CR1, CRR1
Commercial Electric
C71CA(H3)
Elco
EL7RICA, EL7ICA
EL7ICAT
Emerald
P1-ICTN
Halo
H7ICAT, H7RICAT
Intense
I6AIC, I6RAIC
Jimway
C7ICR(H2)
Juno
IC22
Lithonia
L7X
LumaPro
5TP95
Luminaire
LUICT-00
Nora
NHIC-17QAT
NHRIC-17QNBAT
Progress
P187-TG, P87-AT
P816-TG, P86-TG
P821-FB
Sea Gull
1128
WAC
R6VI-ICA,
R6VI-R-ICA
State-of-the-Art Technology for
New Construction & Remodel
P8026 4" LED Trims: IC/Non-IC, New Construction & Remodel
P8026-20 Antique Bronze, 2700K color temp
P8026-20/35K Antique Bronze, 3500K color
temp
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FEATURES
9 LED (Light Emitting Diode) lamps included
11-watt input power
Lumen output: 517 lumens (3500K), 434
lumens (2700K)
Lumen output and distribution comparable
to 50w R20
CRI is 75+
50,000 hours life based on 70% lumen
maintenance
Lamp contains no mercury, meets California
Title 22 requirements
Dimmable using most 3-wire low voltage
electronic dimmers
Die cast heat sink to maximize life
expectancy and lumen output
Optically controlled LED beam spread
Excellent glare control and optical cutoff
Frosted acrylic lens controls direct glare
cULus listed for wet locations
See chart for housing compatibility
P8026-28 White, 2700K color temp
P8026-28/35K White, 3500K color temp
P8026-36 Chestnut, 2700K color temp
P8026-36/35K Chestnut, 3500K color temp
P8026-121 Metallic Silver, 2700K color temp
P8026-121/35K Metallic Silver, 3500K color
temp
4" P8026-28 & P8026-28/35K
Housing Compatability Matrix
Partial list of Progress and competitor housings
compatible with 4" Progress LED trims
P8026-31 Black, 2700K color temp
P8026-31/35K Black, 3500K color temp
Manufacturer
Part Number
Capri
RR4
11W 4" recessed LED retrofit trim
Smooth lensed trim with integral flange
Output: 434 lm (2700K), 517 lm (3500K)
UL/CUL classified for wet locations
Dimensions: 4" ht., 5" overall dia.
TRR4
DY4102
Commercial Electric
HBR200B(H9)
HBR200R(H10)
Elco
EL99ICA
EL99R
Halo
H99ICT
H99T
H99RT
Intense
I4AIC
Juno
IC1
TC1
TC1R
Lithonia
LI3
L3RAT
Nora
HSIC-401AT
NSIC-402QAT
NS-401Q
NSR-404Q
NSR-404QAT
Progress
P831-AT
P832-TG
P830-TG
progresslighting.com | 5
6" and 4" LED Quick-Link: Title 24 Compliant
Introducing P8071 6" & P8026 4" Quick-Link Trims
Single Solution Trims These QL trims are ideal for
new construction residential and light commercial applications.
California Title 24 Compliant Provides a power connector in
place of screw shell socket.
High Lumen output P8071 6" trims are comparable to a 65w BR30
incandescent lamp. P8026 4" trims are comparable to a 50w R20
incandescent lamp.
Superior dimming capabilities When used with 3-wire low
voltage electronic dimmers, these trims feature gradual dimming to
20% of full light output through the dimmer's full range.
Enhanced appearance Acrylic lens diffuses the LEDs, effectively
creating a single visible source.
Regressed reflector and minimal optical aperture create
significantly reduced glare resulting in improved quality of light.
P8071 6" Quick-Link LED Trims: IC/Non-IC, New Construction & Retrofit
12W 6" recessed LED Quick-Link trim
Smooth lensed trim with integral flange
IC/Non-IC
Output: 502 lm (2700K), 584 lm (3500K)
UL/CUL listed for wet locations
Dimensions: 5" ht., 7-3/4" overall dia.
P8071-36QL/27K Chestnut, 2700K color temp
P8071-36QL/35K Chestnut, 3500K color temp
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FEATURES
9 LED (Light Emitting Diode) lamps included
12-watt input power
Quick Link power coupler
Lumen output: 584 lumens (3500K), 502
lumens(2700K)
Lumen output and distribution comparable
to a 65w BR30 incandescent lamp
CRI is 73
50,000 hours life based on 70% lumen
maintenance
Lamp contains no mercury, meets California
Title 22 requirements
Dimmable using most 3-wire low voltage
electronic dimmers
Die cast heat sink to maximize life
expectancy and lumen output
Optically controlled LED beam spread
Excellent glare control and optical cutoff
Frosted acrylic lens controls direct glare
cULus listed for wet locations
Works with P87-ATQL housing (ordered
separately)
P8071-20QL/27K Antique Bronze, 2700K
color temp
P8071-20QL/35K Antique Bronze, 3500K
color temp
P8071-121QL/27K Metallic Silver, 2700K
color temp
P8071-121QL/35K Metallic Silver, 3500K
color temp
P87-ATQL: 6" Quick-Link Housing
P8071-28QL/27K White, 2700K color temp
P8071-28QL/35K White, 3500K color temp
P8071-31QL/27K Black, 2700K color temp
P8071-31QL/35K Black, 3500K color temp
6 | progresslighting.com
P87-ATQL
6" Recessed New Construction Housing
Integral nail bar hanger
Dimensions: 7-7/8" x 10-3/4"
Ceiling opening: 6-7/8" dia.
Plaster frame: 7-7/8" x 10-3/4"
Recessed depth: 7-1/2"
Pryouts: 1/2" & 3/4"
UL and CUL listed for damp locations
Title 24 compliant
State-of-the-Art Technology for
New Construction & Remodel
Quick-Link: Title 24 Compliant Connectors
Quick Link (QL) trims comply with the
requirements of California Title 24
by providing a plug-in power connector
in place of a screw shell socket. Ideal
for residential and light commercial new
construction applications where the use of
screw shell sockets is restricted.
P8026 4" Quick-Link LED Trims: IC/Non-IC, New Construction & Retrofit
P8026-20QL/27K Antique Bronze, 2700K
color temp
P8026-20QL/35K Antique Bronze, 3500K
color temp
P8026-28QL/27K White, 2700K color temp
P8026-28QL/35K White, 3500K color temp
P8026-36QL/27K Chestnut, 2700K color temp
P8026-36QL/35K Chestnut, 3500K color temp
P8026-121QL/27K Metallic Silver, 2700K
color temp
P8026-121QL/35K Metallic Silver, 3500K
color temp
11W 4" recessed LED Quick-Link trim
Smooth lensed trim with integral flange
Output: 434 lm (2700K), 517 lm (3500K)
UL/CUL listed for wet locations
Dimensions: 4" ht., 5" overall dia.
P8026-31QL/27K Black, 2700K color temp
P8026-31QL/35K Black, 3500K color temp
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P830-ATQL: 4" Quick-Link Housing
P830-ATQL
4" Recessed New Construction Housing
Integral nail bar hanger
Ceiling opening: 4-1/2" dia.
Plaster frame: 7-7/8" x 10-3/4"
Recessed depth: 5-1/2"
Pryouts: 1/2" & 3/4"
UL and CUL listed for damp locations
Title 24 compliant
QUICK LINK AND RETROFIT FEATURES
9 LED (Light Emitting Diode) lamps included
11-watt input power
Quick Link power coupler
Lumen output: 517 lumens (3500K), 434
lumens (2700K)
Lumen output and distribution comparable to
50w R20
CRI is 75+
50,000 hours life based on 70% lumen
maintenance
Lamp contains no mercury, meets California
Title 22 requirements
Dimmable using most 3-wire low voltage
electronic dimmers
Die cast heat sink to maximize life expectancy
and lumen output
Optically controlled LED beam spread
Excellent glare control and optical cutoff
Frosted acrylic lens controls direct glare
cULus listed for wet locations
Works with P830-ATQL housing (ordered
separately)
progresslighting.com | 7
Photometric Information
6" P8071 Trims
P8071-28: 6" 2700K with White Interior and Frosted Flat Acrylic Lens
No. Lamps: 1 / Type Lamps: Nine LEDS
Total Lumens: 502 S/MH / Ratio 1:0. LSI 24455
QUICK CALCULATOR CHART
Large Room - RCR: 2.0 1500 to 2500 square foot area
DISTRIBUTION CURVE
INTENSITY DATA
Initial Footcandles
2'6" from floor
Initial Footcandles
2'6" from floor
QUICK CALCULATOR CHART
Medium Room - RCR: 5.0 120 to 200 square foot area
Area per Fixture (sq. ft.)
Room Reflectances: 80% Ceiling, 50% Wall, 20%
Floor Ceiling Ht.: 9 ft.
Area per Fixture (sq. ft.)
Room Reflectances: 80% Ceiling, 50% Wall, 20%
Floor Ceiling Ht.: 10 ft.
SINGLE FIXTURE DATA
ZONAL CAVITY COEFFICIENTS OF UTILIZATION
Effective Floor Cavity Reflectance 0.20
Ft.-C (Footcandles) are initial and measured in 2'6" from floor
P8071-28/35K : 6" 3500K with White Interior & Frosted Flat Acrylic Lens
No. Lamps: 1 / Type Lamps: Nine LEDS
Total Lumens: 584 / S/MH Ratio 1:0. LSI 24453.
QUICK CALCULATOR CHART
QUICK CALCULATOR CHART
Medium Room - RCR: 5.0 120 to 200 square foot area
Large Room - RCR: 2.0 1500 to 2500 square foot area
Initial Footcandles
2'6" from floor
Initial Footcandles
2'6" from floor
DISTRIBUTION CURVE
Area per Fixture (sq. ft.)
Room Reflectances: 80% Ceiling, 50% Wall, 20%
Floor Ceiling Ht.: 9 ft.
SINGLE FIXTURE DATA
Area per Fixture (sq. ft.)
Room Reflectances: 80% Ceiling, 50% Wall, 20%
Floor Ceiling Ht.: 10 ft.
ZONAL CAVITY COEFFICIENTS OF UTILIZATION
Effective Floor Cavity Reflectance 0.20
Ft.-C (Footcandles) are initial and measured in 2'6" from floor
8 | progresslighting.com
INTENSITY DATA
Photometric Information
4" P8026 Trims
P8026-28: 4" 2700K with White Interior & Frosted Flat Acrylic Lens
No. Lamps: 1 / Type Lamps: Nine LEDS
Total Lumens: 434 / S/MH Ratio 1:0. LSI 24451
Large Room - RCR: 2.0 1500 to 2500 square foot area
DISTRIBUTION CURVE
INTENSITY DATA
Initial Footcandles
2'6" from floor
QUICK CALCULATOR CHART
Initial Footcandles
2'6" from floor
QUICK CALCULATOR CHART
Medium Room - RCR: 5.0 120 to 200 square foot area
Area per Fixture (sq. ft.)
Room Reflectances: 80% Ceiling, 50% Wall, 20%
Floor Ceiling Ht.: 9 ft.
Area per Fixture (sq. ft.)
Room Reflectances: 80% Ceiling, 50% Wall, 20%
Floor Ceiling Ht.: 10 ft.
ZONAL CAVITY COEFFICIENTS OF UTILIZATION
SINGLE FIXTURE DATA
Effective Floor Cavity Reflectance 0.20
Ft.-C (Footcandles) are initial and measured in 2'6" from floor
P8026-28/35K: 4" 3500K with White Interior & Frosted Flat Acrylic Lens
No. Lamps: 1 / Type Lamps: Nine LEDs
Total Lumens: 517 LEDS/ S/MH Ratio 1:0. LSI 24449.
DISTRIBUTION CURVE
Initial Footcandles
2'6" from floor
QUICK CALCULATOR CHART
Large Room - RCR: 2.0 1500 to 2500 square foot area
Initial Footcandles
2'6" from floor
QUICK CALCULATOR CHART
Medium Room - RCR: 5.0 120 to 200 square foot area
Area per Fixture (sq. ft.)
Room Reflectances: 80% Ceiling, 50% Wall, 20%
Floor Ceiling Ht.: 9 ft.
SINGLE FIXTURE DATA
Area per Fixture (sq. ft.)
Room Reflectances: 80% Ceiling, 50% Wall, 20%
Floor Ceiling Ht.: 10 ft.
ZONAL CAVITY COEFFICIENTS OF UTILIZATION
Effective Floor Cavity Reflectance 0.20
Ft.-C (Footcandles) are initial and measured in 2'6" from floor
INTENSITY DATA
701 Millennium Blvd.
Greenville, South Carolina
29607
www.progresslighting.com
REV 07/09
As an ENERGY STAR Partner, Progress Lighting
is committed to manufacturing energy efficient
products while educating homeowners,
homebuilders and consumers on new options
available in “green’’ lighting. Additionally,
Progress Lighting has received many awards for
introducing decorative LED fixtures with state-ofthe-art, environmentally friendly features.
www.progressled.com