A comprehensive offer
Easergy range is part of a comprehensive offer of products that are perfectly coordinated to meet all medium and low voltage electrical distribution requirements. All of these products have been designed to work together: electrical, mechanical and communication compatibility.
The electrical installation is thus optimised and has improved performance:
• better service continuity,
• increased personnel and equipment safety,
• guaranteed upgradeability,
• efficient monitoring and control.
You therefore have all the advantages at hand in terms of know-how and creativity for achieving optimised, safe, upgradeable and compliant installations.
Tools for facilitating the design and installation
With Schneider Electric, you have a complete range of tools to help you get to know and install the products whilst complying with current standards and good working practices.
These tools, technical sheets and guides, design software, training courses, etc are regularly updated.
For a real partnership with you
A universal solution doesn’t exist because each electrical installation is specific. The variety of combinations on offer allows you to truly customise the technical solutions.
You are able to express your creativity and put your know-how to best advantage when designing, manufacturing and exploiting an electrical installation.

Reducing down time and improving productivity
• Reliable MV network fault detection and indication, for complete peace of mind
• Optimized actions through detailed local or remote information
• Remote network reconfiguration through control units (GSM,
Internet, standard protocols, etc)
Keeping in control of invesments
• Solutions catalogue to meet every need in terms of budget and network operation
• Simplified and controlled integration and operation
• Modular and scaleable offer adapting to your current and future needs, for total flexibility.

Easergy Flite - A range of fault detectors for MV overrhead networks.
Detectors for local fault current indication, permanent and transient, phase to phase and phase to earth.
• Flite 110-SA and 112-SA: single-phase, line-mounted ammetric fault passage detectors
• Flite 210 and 230: single-phase, pole-mounted ammetric fault passage detectors
• Flite 3XX: three-phase, pole-mounted directional detectors
Communitating fault detector for remote indication
• Flite 116-SA: single-phase, line-mounted ammetric fault passage detectors communicating via short range radio with the G200 concentrator.
• G200: Concentrator to provide local processing of data sent by
Flite 116-SA units and communication with the control center.
Flite 110/112 SA
Flite116/G200
Easergy T200 - Control unit for MV substations and overhead switches with a high level of integrated functions.
A flexible architecture with a high level of integrated functions:
• Management of switchgears
• Uninterruptible power supply
• Fault passage indicator
• Measurements
• MV network reconfiguration automation
• Large catolog of protocols: IEC 870-5-101 and 104, DNP3,
Modbus, and various proprietary protocols
• Various transmission systems: Ethernet, RS232, Radio, PSTN,
GSM,
One solution for all networks
• Easergy T200I: controls 1-16 switches for underground networks
• Easergy T200E: controls 4 switches for underground networks
• Easergy T200P: controls 1-4 switches or overhead networks
Flite 210/230
Flite 3xx
T200P Overhead network control

Easergy Flair A range of fault detectors for MV underground networks
Three-phase fault current detectors for local indication of phase to phase and phase to earth fault currents.
• Flair 2XD: self-powered, overcurrent detectors integrated in the
MV switchgear
• Flair 279 and 219: wall-mounted ammetric fault passage detectors
• Flair 3XX: directional detectors
Communitating fault detector for remote indication
• Flair 200C: 2-channel, 3-phase current fault detector compatible with all type of neutral arrangement. In addition to conventional detection functions, Flair 200C integrates substation metering, monitoring and communication with the control center.
Flair 279-219
Flair 200C
Easergy L500 - Network control system dedicated to the Easergy range
A simplified operation
• Mini Scada with network view, detail view, alarm log and archive for Easergy equipment control
• Simplified implementation through preconfigured libraries
Flair 2xD
Flite 3xx
T200I Underground network control

Schneider Electric
35 Rue Joseph Monier
CS 30323
92506 Rueil Malmaison Cedex
Tel : +33 (0)1 41 29 70 00
Fax : +33 (0)1 41 29 71 00 www.schneider-electric.com
ENMED199054EN
As standards, specifications and designs change from time to time, please ask for confirmation of the information given in this publication.
This document has been printed on ecological paper
Publishing: Schneider Electric IndustriesSAS
Design: Schneider Electric Industries SAS
Printing: Imprimerie des Deux Ponts - made in France
01-2010