AMP800
MINIAMP
User’s Manual
Version 1.1
October 2005
MINIAMP AMP800
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
To reduce the risk of electric shock,
do not remove the top cover (or the
rear section). No user serviceable
parts inside; refer servicing to
qualified personnel.
WARNING:
To reduce the risk of fire or electric
shock, do not expose this appliance
to rain and moisture. The apparatus
shall not be exposed to dripping or
splashing and no objects filled with
liquids, such as vases, shall be placed
on the apparatus.
This symbol, wherever it appears,
alerts you to the presence of
uninsulated dangerous voltage inside
the enclosure—voltage that may be
sufficient to constitute a risk of shock.
This symbol, wherever it appears,
alerts you to important operating and
maintenance instructions in the
accompanying literature. Please
read the manual.
DETAILED SAFETY INSTRUCTIONS:
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this apparatus near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9)
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11)
Only use attachments/accessories specified by the manufacturer.
12)
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13)
Unplug this apparatus during lightning storms or when unused for long periods of time.
14)
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15)
CAUTION - These service instructions are for use by qualified service personnel only. To
reduce the risk of electric shock do not perform any servicing other than that contained in the
operation instructions unless you are qualified to do so.
2
MINIAMP
MINIAMP AMP800
Ultra-Compact 4-Channel Stereo Headphone Amplifier
AMP800
V 4 totally independent stereo high-power amplifier sections
V Highest sonic quality with virtually all types of headphones even at maximum
volume
V Phones Level control plus accurate 6-digit LED output meter per channel for
easy level monitoring
V 2 balanced stereo main inputs with independent Level and Balance controls
for individual mixes, selectable for all 4 headphone amplifiers
V Accurate 6-digit LED main input meter for precise level indication of both line
inputs
V Dual headphone outputs on each channel on front and rear panels allow a
total of 8 headphones to be connected at the same time
V Parallel Link Output allows cascading of several headphone amplifiers
V High-quality potentiometers and illuminated switches for long-term reliability
V Ultra low-noise audio operational amplifiers offer outstanding sound performance
V All Mini Series models can be stacked on top of each other to create an ultracompact signal processor solution
V High-quality components and exceptionally rugged construction ensure long
life
V Conceived and designed by BEHRINGER Germany
3
DEUTSCH
V Ultra-compact 9.5" headphone amplifier system for studio and stage applications
MINIAMP AMP800
FOREWORD
Dear Customer,
Thank you very much for expressing your confidence in
BEHRINGER products by purchasing the MINIAMP
AMP800.
Writing this foreword for you gives me great pleasure,
because it represents the culmination of many months of
hard work delivered by our engineering team to achieve a
very ambitious goal: presenting four stereo amplifier sections
in one compact and flexible headphone amplifier. The task
of designing our new AMP800 certainly meant a great deal
of responsibility, which we assumed by focusing on you,
the discerning user and musician. Meeting your expectations
also meant a lot of work and night shifts. But it was fun, too.
Developing a product usually brings a lot of people together,
and what a great feeling it is when everybody who has
participated in such a project can be proud of what they’ve
achieved.
It is our philosophy to share our enjoyment with you, because
you are the most important member of the BEHRINGER
team. With your highly competent suggestions for new
products, you’ve made a significant contribution to help
shape our company and make it successful. In return, we
guarantee you uncompromising quality, as well as excellent
technical and audio properties at an extremely reasonable price. All of this will enable you to give
free rein to your creativity without being hampered by budget constraints.
We are often asked how we manage to produce such high-quality devices at such unbelievably low
prices. The answer is quite simple: it’s you, our customers! Many satisfied customers mean large
sales volumes enabling us to get better purchasing terms for components, etc. Isn’t it only fair to
pass this benefit on to you? Because we know that your success is our success too!
I would like to thank all of those who have made the AMP800 possible. You have all made your own
personal contributions, from the developers to the many other employees at this company, and to
you, the BEHRINGER user.
My friends, it’s been worth the effort!
Thank you very much,
Uli Behringer
4
MINIAMP AMP800
TABLE OF CONTENTS
1. INTRODUCTION .......................................................................................... 5
1.1 Before you begin .................................................................................................................... 5
1.1.1 Shipment ....................................................................................................................... 5
1.1.2 Initial operation ............................................................................................................. 6
1.1.3 Online registration ......................................................................................................... 6
2.1 Font panel ............................................................................................................................... 6
2.2 Rear panel ............................................................................................................................. 7
3. SETUP EXAMPLE ........................................................................................ 8
4. AUDIO CONNECTIONS ................................................................................ 9
5. SPECIFICATIONS ...................................................................................... 10
6. OTHER MINI PRODUCTS .......................................................................... 11
7. WARRANTY ................................................................................................ 12
1. INTRODUCTION
Thank you very much for expressing your confidence in our products by purchasing one of our
headphone amplifier systems. This 4-channel stereo headphone amplifier is designed for use with
all types of headphones and therefore provides maximum flexibility. Its high-power stereo amplifiers
guarantee the highest sonic quality. The ultra low-noise 4580 operational amplifiers ensure outstanding
audio performance.
Please read the manual carefully and keep it around for future reference.
1.1 Before you begin
1.1.1 Shipment
Your AMP800 was carefully packed at the factory, and the packaging was designed to protect the
unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging
and its contents for any signs of physical damage that may have occurred during transit.
If the unit is damaged, please do NOT return it to BEHRINGER. Instead, notify your
dealer and the shipping company immediately. Otherwise, claims for damage or
replacement may not be honored.
Always use the original packing carton to prevent damage during storage or transport.
Make sure that no children are left unsupervised with the AMP800 or its packaging.
Please ensure proper disposal of all packing materials.
1. INTRODUCTION
5
DEUTSCH
2. CONTROL ELEMENTS ............................................................................... 6
MINIAMP AMP800
1.1.2 Initial operation
Do not put the AMP800 on any equipment that generates intense heat, for example an amplifier.
Ensure that the ventilation openings that are located on the top panel of the AMP800 are not covered
or blocked.
To power the AMP800, use only the power supply unit that is delivered with your
equipment.
1.1.3 Online registration
Please do remember to register your new BEHRINGER equipment right after your purchase by
visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions
of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible.
To arrange for warranty service, please contact the retailer from whom the equipment was purchased.
Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our
subsidiaries. Corresponding contact information is included in the original equipment packaging
(Global Contact Information/European Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be found in the support area of our
website (www.behringer.com/support).
Registering your purchase and equipment with us helps us process your repair claims quicker and
more efficiently.
Thank you for your cooperation!
2. CONTROL ELEMENTS
The AMP800 is a headphone amplifier that includes 4 Headphone Channels, so you can share the
AMP800 with other musicians. In addition, each musician can choose between 2 audio channels:
Input Channel A and Input Channel B.
Ensure that only qualified personnel set up and operate the AMP800.
2.1 Front panel
This section describes how to use the front panel of the AMP800, illustrated as follows:
Fig. 2.1: AMP800 front panel
In the previous illustration, each control element is associated with a callout, for example
this section, use these callouts to identify details about each control element.
For each Input Channel (A and B), the front panel includes control elements
manage the signal in each of these Input Channels, use these control elements:
and
. In
. To
LEVEL control: To adjust the input level of a signal, turn this control toward 0 (minimum level)
or, alternatively 6 (maximum level).
6
2. CONTROL ELEMENTS
MINIAMP AMP800
BALANCE control: To adjust the stereo image of a signal, turn this control toward L (left) or,
alternatively R (right).
A + B meter: To monitor the combined level of both signals (A and B), use this meter. An LED
glows next to the value that identifies the combined level (-24 dB to 0 dB). If the signal is too
strong, the CLIP LED glows. Most of the time, the optimal level is 0 dB (a full signal).
through
(headphone) connector: To connect a headphone, use this stereo, ¼" TRS connector. For
details about TRS plugs, see 4. AUDIO CONNECTIONS.
INPUT button: To select an Input Channel, push this button. When you listen to:
V Input Channel A, this button is not pushed in and not lit
V Input Channel B, this button is pushed in and lit
PHONES LEVEL control: To adjust the level of a headphone signal, turn this control toward 0
(minimum volume) or, alternatively 6 (maximum volume).
CH meter: To monitor the level of a headphone signal, use this meter. An LED glows next to
the value that identifies the headphone volume (-24 dB to 0 dB). If the signal is too strong, the
CLIP LED glows. Most of the time, the optimal volume is 0 dB (a full signal).
(power) button: To turn the AMP800 on and off, push this button. When you turn the AMP800:
V on, this button is pushed in and lit
V off, this button is not pushed in and not lit
When you finish using the AMP800, unplug the power supply unit from the power source.
As long as the power supply unit is connected to a power source, the power supply unit
consumes energy.
2.2 Rear panel
This section describes how to use the rear panel to set up the AMP800.
The following illustrates the rear panel of the AMP800:
Fig. 2.2: AMP800 rear panel
In the previous illustration, each control element is associated with a callout, for example
this section, use these callouts to identify details about each control element:
. In
POWER connector: To power the AMP800, connect the power supply unit to this connector.
This power supply unit is delivered with the AMP800.
PHONES OUT connectors: For each Headphone Channel (1, 2, 3, and 4), the rear panel
includes an additional headphone connector, which is a stereo, ¼" TRS connector.
2. CONTROL ELEMENTS
7
DEUTSCH
For each Headphone Channel (1, 2, 3, and 4), the front panel includes control elements
. To manage each Headphone Channel, use these control elements:
MINIAMP AMP800
LINK OUT A connectors: If you need more than the 4 Headphone Channels that a single
AMP800 provides, connect these balanced, ¼" TRS connectors (Left and Right) to the inputs
of another AMP800. The LINK OUT A connectors send only the signal of Input Channel A,
without any LEVEL or BALANCE settings.
INPUT connectors: For each Input Channel (A and B), the rear panel includes 2 balanced,
¼" TRS connectors (Left and Right). Connect them to the outputs of a mixer, a CD player, or
a soundcard. For mono signals, use only the L connector.
If the output is balanced and you insert unbalanced, ¼" TS plugs in the INPUT connectors,
the signal level will decrease 6 dB. To raise the signal level, use the relevant LEVEL
).
control (
SERIAL NUMBER: To register the AMP800, use this unique serial number.
For details about TS and TRS plugs, see 4. AUDIO CONNECTIONS.
3. SETUP EXAMPLE
The following example illustrates the role of the AMP800 in your audio setups:
L & R Input
PRO MIXER VMX100
Phones Out
MINIAMP AMP800
L & R Input
L & R Link Out A
CD Player
MINIAMP AMP800
Fig. 3.1: Setup example
About setting up with other MINI products
The AMP800 belongs to the MINI suite of BEHRINGER products. You can set up the AMP800 with
these products. For details, see 6. OTHER MINI PRODUCTS.
8
3. SETUP EXAMPLE
MINIAMP AMP800
4. AUDIO CONNECTIONS
DEUTSCH
The following provides illustrations of patch cords that include unbalanced, ¼" TS plugs and balanced,
¼" TRS plugs:
Fig. 4.1: Patch cord with unbalanced, ¼" TS plugs
Fig. 4.2: Patch cord with balanced, ¼" TRS plugs
4. AUDIO CONNECTIONS
9
MINIAMP AMP800
5. SPECIFICATIONS
INPUT
Type
¼" TRS connector, balanced
Impedance
approx. 20 kΩ, balanced
approx. 10 kΩ, unbalanced
CMRR
40 dB typ. @ 1 kHz
PHONES OUT
Type
¼" TRS connector, stereo
Impedance
min. 100 Ω
Max. output level
+13 dBu @ 100 Ω load
LINK OUT A
Type
¼" TRS connector, balanced
SYSTEM SPECIFICATIONS
Frequency response
10 Hz to 120 kHz, -3 dB
Dynamic range
108 dB, 10 Hz to 22 kHz (100 Ω load)
Distortion
0.007 % typ. (100 Ω load)
Crosstalk
< 80 dBu @ 1 kHz
Signal-to-noise ratio
10 Hz to 22 kHz < 95 dB @ 0 dBu, a-weighted
AMPLIFIER
Max. output level
+21 dBm / 124 mW (100 Ω load)
Min. output impedance
47 Ω
POWER SUPPLY
Mains connection
external power supply, 9 V~ / 750 mA
Mains voltage
USA/Canada
120 V~, 60 Hz
U.K./Australia
240 V~, 50 Hz
China
220 V~, 50 Hz
Europe
230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
Power consumption
11 W
DIMENSIONS/WEIGHT
Dimensions (H x W x D)
approx. 1.89" (48 mm) x 9.55" (242.6 mm) x 4.72" (120 mm)
Weight
approx. 1.09 lbs. (0,495 kg )
BEHRINGER constantly strives to maintain the highest quality standards. Modifications may be made, if
necessary, without prior notice. The specifications and appearance of the equipment may therefore differ
from those listed or illustrated.
10
5. SPECIFICATIONS
MINIAMP AMP800
6. OTHER MINI PRODUCTS
The MINIAMP belongs to the MINI suite of BEHRINGER products, which can operate together and
are introduced below:
MINIFEX FEX800
MINICOM COM800
Ultra-compact 9.5" stereo modeling compressor for studio and stage applications
V 16 awesome preset models for the most typical compression applications (vocal, drums,
guitar, keyboard, etc.)
V Dedicated Compressor Modeling control with LED’s indicating the selected dynamics
program
MINIM
IC M
IC800
INIMIC
MIC800
Ultra-compact 9.5" microphone modeling preamp for studio and stage applications
V High-end preamplifier for all microphone, instrument and line-level sources. Perfectly
complements studio-grade condenser mics
V Ultra-flexible Preamp Modeling allows you to quickly optimize your recordings
MINIMON MON800
Ultra-compact 9.5" monitor matrix mixer for studio and stage applications
V Dedicated input section with 4 selectable and mixable stereo inputs
V Accurate 6-digit LED main stereo output meters for precise level indication
MINIFBQ FBQ800
Ultra-compact 9.5" graphic equalizer for studio
and stage applications
V Revolutionary FBQ Feedback Detection
System instantly reveals critical frequencies
and can also be used as Audio Analyzer
V Additional Low Cut filter removes unwanted
frequencies, e. g. floor rumble
M INIBEA
T BEA
T800
INIBEAT
BEAT800
Ultra-compact 9.5" dual beat counter/phono
preamp for studio and stage applications
V Intelligent dual BPM counters with Tempo
Difference indicator
V Ultra-flexible Beat Assist and Sync Lock
functions
MINIMIX MIX800
Ultra-compact 9.5" karaoke machine for studio
and stage applications
V Revolutionary Voice Canceller—effectively
eliminates vocals from any stereo source
while retaining most music elements
V Integrated digital echo/reverb processor in 24bit/40 kHz resolution for ultimate vocal
enhancement
MINI products stack on top of each other
6. OTHER MINI PRODUCTS
11
DEUTSCH
Ultra-compact 9.5" stereo multi-effects processor for studio and stage applications
V 16 awesome FX presets in 24-bit/48 kHz resolution including reverb, delay, chorus,
flanger, phaser, rotary speaker, pitch shifter and multi-effects
V Intuitive FX Preset control with LED’s indicating the selected program
MINIAMP AMP800
7. WARRANTY
§ 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW
1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in
particular, any such rights against the seller that arise from a legally effective purchase contract.
2. The warranty regulations mentioned herein are applicable unless they constitute an infringement
of national warranty law.
§ 2 ONLINE REGISTRATION
Please do remember to register your new BEHRINGER equipment right after your purchase by
visiting www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions
of our warranty carefully.
Registering your purchase and equipment with us helps us process your repair claims quicker and
more efficiently.
Thank you for your cooperation!
§ 3 WARRANTY
1. BEHRINGER (BEHRINGER International GmbH including all BEHRINGER subsidiaries listed on
the enclosed page, except BEHRINGER Japan) warrants the mechanical and electronic components
of this product to be free of defects in material and workmanship for a period of one (1) year* from
the original date of purchase, in accordance with the warranty regulations described below. If the
product shows any defects within the specified warranty period that are not excluded from this
warranty as described under § 5, BEHRINGER shall, at its discretion, either replace or repair the
product using suitable new or reconditioned parts. In the case that other parts are used which
constitute an improvement, BEHRINGER may, at its discretion, charge the customer for the additional
cost of these parts.
2. If the warranty claim proves to be justified, the product will be returned to the user freight prepaid.
3. Warranty claims other than those indicated above are expressly excluded.
§ 4 RETURN AUTHORIZATION NUMBER
1. To obtain warranty service, the buyer (or his authorized dealer) must call BEHRINGER (see
enclosed list) during normal business hours BEFORE returning the product. All inquiries must be
accompanied by a description of the problem. BEHRINGER will then issue a return authorization
number.
2. Subsequently, the product must be returned in its original shipping carton, together with the return
authorization number to the address indicated by BEHRINGER.
3. Shipments without freight prepaid will not be accepted.
§ 5 WARRANTY REGULATIONS
1.
Warranty services will be furnished only if the product is accompanied by a copy of the
original retail dealer’s invoice. Any product deemed eligible for repair or replacement under the
terms of this warranty will be repaired or replaced.
2.
If the product needs to be modified or adapted in order to comply with applicable technical
or safety standards on a national or local level, in any country which is not the country for which the
product was originally developed and manufactured, this modification/adaptation shall not be
considered a defect in materials or workmanship. The warranty does not cover any such modification/
adaptation, irrespective of whether it was carried out properly or not. Under the terms of this warranty,
BEHRINGER shall not be held responsible for any cost resulting from such a modification/adaptation.
3. Free inspections and maintenance/repair work are expressly excluded from this warranty, in
particular, if caused by improper handling of the product by the user. This also applies to defects
caused by normal wear and tear, in particular, of faders, crossfaders, potentiometers, keys/buttons,
tubes, guitar strings, illuminants and similar parts.
12
7. WARRANTY
MINIAMP AMP800
V
improper handling, neglect or failure to operate the unit in compliance with the instructions
given in BEHRINGER user or service manuals.
V
connection or operation of the unit in any way that does not comply with the technical or safety
regulations applicable in the country where the product is used.
V
damages/defects caused by force majeure or any other condition that is beyond the control of
BEHRINGER.
5. Any repair or opening of the unit carried out by unauthorized personnel (user included) will void
the warranty.
6. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by
the warranty, the inspection costs are payable by the customer.
7. Products which do not meet the terms of this warranty will be repaired exclusively at the buyer’s
expense. BEHRINGER will inform the buyer of any such circumstance. If the buyer fails to submit a
written repair order within 6 weeks after notification, BEHRINGER will return the unit C.O.D. with a
separate invoice for freight and packing. Such costs will also be invoiced separately when the buyer
has sent in a written repair order.
§ 6 WARRANTY TRANSFERABILITY
This warranty is extended exclusively to the original buyer (customer of retail dealer) and is not
transferable to anyone who may subsequently purchase this product. No other person (retail dealer,
etc.) shall be entitled to give any warranty promise on behalf of BEHRINGER.
§ 7 CLAIM FOR DAMAGES
Failure of BEHRINGER to provide proper warranty service shall not entitle the buyer to claim
(consequential) damages. In no event shall the liability of BEHRINGER exceed the invoiced value of
the product.
* Customers in the European Union please contact BEHRINGER Germany Support for further details.
Technical specifications and appearance subject to change without notice. The information contained
herein is correct at the time of printing. The names of companies, institutions or publications pictured
or mentioned and their respective logos are registered trademarks of their respective owners. Their
use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark
owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by
any person who relies either wholly or in part upon any description, photograph or statement contained
herein. Colours and specification may vary slightly from product. Products are sold through our
authorised dealers only. Distributors and dealers are not agents of BEHRINGER® and have absolutely
no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part
of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording of any kind, for any purpose, without the express
written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered
trademark.
ALL RIGHTS RESERVED. © 2005 BEHRINGER Spezielle Studiotechnik GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
7. WARRANTY
13
DEUTSCH
4. Damages/defects caused by the following conditions are not covered by this warranty: