Knürr E-Seismic Rack
Protect your IT equipment
Superior Technology For Varying
Seismic Conditions
In times of unpredictable environmental
phenomenon like earthquakes, it is vital that
your critical IT equipment are protected from
unexpected tremors and ground shakes. As
your mission-critical networks are carrying
an ever increasing amount of voice, data and
video, it is imperative that your IT enclosure
is ready to protect your equipment from
earthquakes and other man-made ground
movement. These challenges require an
innovation in your racks to fully address seismicrelated circumstances thru a physical enclosure
that is able to ensure protection for optimal IT
operation.
The Knürr E-Seismic Rack from Emerson
Network Power offers an innovative and
reliable solution for seismic movements in
the data centre or computer room. This rack
has a reinforced inner frame which provides
structural rigidity and has safety anchoring
measures designed for earthquakes and seismic
related earth movements. It comes in 42U
(H) x 600mm (W) x 1200mm (D), with 75%
perforation for optimized airflow and tool-less
installation options for convenient setup and
maintenance.
Knürr E-Seismic Rack



Compliant to stringent specifications as defined by
Telcordia / Bellcore GR-63-CORE Standard for Zone 4
Earthquake requirements
Certified to a 664KG distributed equipment load
75% open high perforated doors for optimal air flow
The Anchoring of Knürr E-Seismic Rack:
75% Open Perforated Doors
Optimal performance of air flow
Tool-Less Blanking Panel
High efficiency design for
installation and maintenance
Certified 664KG Net Load
Compliant to Telcordia /
Bellcore GR-63-CORE Standard
for Zone 4 Earthquake
requirements
Solid Steel Frame With Installation
Slots
 Convenient and efficient design
for tool-less cable management
 Enhance installation space
efficiency
Tool-Less Cable Management
Allows flexible cabling in the
rack for easy installation
Ready-made Access Control On
Rack
 One same key to both doors
and side panels
 Optional mechanical code lock
– easy retrofitting to standard
locks
Roof Top Module Cable Entry
Tool-less installation of cover
plate
Convenient and Quick Baying
Supports baying for racks with side
panels
The Knürr E-Seismic rack is supposed
to be anchored on the horizontal floor
or equivalent with mounting screws
and nuts included in the standard
configuration:
7 sets of M12x35mm (nuts and
screws)
 4 sets of M8x35mm (nuts and
screws)

Knürr E-Seismic Rack:
Includes:
 1 single flat mesh front door
 1 double flat mesh rear door
 1 roof top with 4 cable entries
 1 pair of side panels with lock (optional)
 4 x (19”) EIA-310 vertical mounting rails
 4 leveling feet and 4 casters
 42U vertical cable tray for two PDU
mounting x 2
 All rack panels are inherently grounded
Knürr E-Seismic Rack
E-Seismic Rack - 42Ux600Wx1200D with Side
Panels, RAL7021 Black
Part
Number
010259418
Accessories




30 sets of captive M6 nuts and M6 screws
7 sets of M12x35mm (nuts and screws)
4 sets of M8x35mm (nuts and screws)
1 mounting tool for captive M6 nut
Baying kit, 4 pieces
Open bottom area
Cable Management - Vertical
Part Number
Cable Management Lobster Claw, Qty 10
010251218
Cable Management Velcro Strip, Qty 10
010251239
42U Vertical Cable Tray w/Two PDU Mounting
Space 142mm for E-Series, 1 piece
010251918
Velcro Strip, 22.8m Long
010251399
612-2-96443297
Air Flow Management
Part Number
Blanking Panel 1U, Qty 5
010251548
Basic PDUs - Vertical Mount
Part Number
Blanking Panel 2U, Qty 5
010251528
Rack basic PDU: 10A C14, 16 way C13, Black,
0U
010253019
Blanking Panel 2U, 3U, 6U, Qty 1 each
010251538
Blanking Panel Tool-less 1U, Qty 5
010251558
Rack basic PDU: 16A C20, 20 way C13 + 4 way
C19, Black, 0U
010253219
Blanking Panel Tool-less 2U, Qty 5
010251568
010253229
Blanking Panel Tool-less 2U, 3U, 6U, Qty 1 each
010251578
Rack basic PDU: 16A IEC309, 20 way C13 + 4
way C19, Black, 0U
1U Horizontal Cable Routing Panel with Brush
010251288
Rack basic PDU: 32A Fixed, 20 way C13 + 4 way
C19, Black, 0U
010253419
Shelves
Part Number
Rack basic PDU: 32A IEC309, 20 way C13 + 4
way C19, Black, 0U
010253429
Cantilever Shelf 2U 25kg 315mm Depth
010251078
Light Duty Fixed Shelf 50kg 600mm Depth
010251088
Heavy Duty Fixed Shelf 120kg 600mm Depth
010251038
Heavy Duty Pull-out Shelf 100kg 600mm
Depth
010251048
Cable Management - Horizontal
Part Number
1U Cable Management Panel with 5 Rings
010251298
2U Cable Management Panel with 5 Rings
010251308
DC Power
Embedded Computing
2U Cable Management Panel with Detachable
Cover
010251428
Embedded Power
Note: Each Vertical Mount PDU needs one 42U vertical cable tray
(010251918) to be able to mount toollessly into Emerson E-Series Rack.
Others
Part
Number
Emerson Network Power.The global leader
in enabling business-critical continuity.
3 Digits Combination Lock with Master Key for
E-Series, 1 piece
010251988
AC Power
M6 Captive Nuts and Screws, Qty 50
010251508
Connectivity
Infrastucture Management &
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
Business-Critical Continuity, Emerson Network
Power and the Emerson Network Power logo
are trademarks and service marks of Emerson
Electric © 2011 Emerson Electric Co.
AU12ENC-ESeismicV2-BR