Series
Lamping
XX Clear Glass only
SI Clear Glass
w/ Satine Inlay
OI Clear Glass w/
Opal Inlay
MI Clear Glass w/
Microprismatic Inlay
PC1 Prismatic Lens
SD1 Satine Lens
2T5
1T8
M125R2
Recessed
Flanged / Flush
Endcaps
2T8
1T5HO
2T5HO
M125
For Concrete
Pour Only
1
Shielding
1T5
M125R1
Recessed
Flanged
2
IK10 rated.
415/16" (125mm)
2
3
SH and TS mountings only.
M125R1-1T5-TS
1
31/2"
Scale = 1 : 4
M125R1-1T5-TS-MT
12
7
(37mm)
10
4 /16"
15
37/16"
(125mm)
(88mm)
8
Selux Corp. © 2013
TEL (845) 834-1400
FAX (845) 834-1401
www.selux.us
M125R-0213-01 (ss-v1.2)
6
9
4
Union Made Affiliated
with IBEW Local 363
2. Ballast - Electronic, high power
factor, class "P," type "A" sound rating. Specify 120v, 277v, or 347v.
Ballast is factory pre-wired with
leads to one end of fixture. Cold
Weather ballast (-20°F/ -29°C)
available with CW option. See p. 8
for standard dimming ballast.
3. EM Battery Packs - (not shown)
Standard EM Battery Packs (EM1 EM3) by IOTATM. For detailed information (i.e. operated lamps and
average lumen ratings) please see
IOTATM Product specification sheet.
4. Gear Tray - White powder-coated, cold-rolled steel. Gear tray
installed as a complete electrical
unit fully accessible and removable
from below ceiling.
5. Lamps - Single or double T5
(21W 3’, 28W 4’), T5HO (39W 3’,
54W 4’), or T8 (25W 3’, 32W 4’)
IP65
IK10
Finish
length rounded to the next
highest foot. Factory will
supply layout drawings.
Individual fixtures cannot
be field joined.
1. Housing - Continuous, 6063-T6
extruded aluminum profile up to 4’
long. Die cast aluminum end caps.
Housing and end caps made from
low copper, marine grade aluminum
alloy. Two water-tight nipple connectors join fixtures in run configurations. See p. 7 for details.
NRTL Listed for Wet Locations (i.e. UL, CSA)
Mounting
WH White
003 3 foot
004 4 foot
BK Black
RUN Nominal SV Silver
Lengths*
SP Specify
* For actual lengths see
Premium
p5. For other lengths, configurations indicate nominal
Color
Not available with 347V.
11
(90mm)
57/8" (149mm)
SH Suspension
Bracket
TS 1” Studs
(Factory
installed)
RC Rotating
Crossbar
PM Perimiter
Mount
MTB6 Metal Box
Concrete
Pour
Nominal
Length
Suspension Brackets (SH)
15
5
Mounting
Not available with T5HO.
12
4
17/16"
Options
_
Shielding
41/2"
Series
Lamping
_
5
Not available with 2T5HO.
_
Nominal
Length
Voltage
120
277
347
6
Finish
_
Voltage
Options
MT2 Media Trunking
EM13,4,5 Stand-by Battery Pack (ISL-28)
EM24,5 Stand-by Battery Pack (ISL-54)
EM34,5 Stand-by Battery Pack (ISL-540)
DM
Non-Standard Driver
DMA5 Lutron EcoSystem
DME5 Lutron Hi-Lume 3D EcoSystem Dimming
DMH5 Lutron EcoSystem H-Series Dimming
DM35 Lutron Hi-Lume 3D 3-wire Dimming
DM45 Lutron Hi-Lume 3D 4-wire Dimming
DM75 Advance: Mark 7 Dimming (0-10V)
DM105 Advance: Mark 10 Dimming (2-wire)
TM
Tandem Wiring
FS4
Single Fusing
CW
Cold Weather Ballast
NC7 Nipple Connector (RUN only)
For M125 Concrete Pour Only. 7Not required when MT is used.
Rotating Crossbar
13
_
Perimiter Mount
lamping by others.
6. Shielding - Choice of 4mm
satine or clear polycarbonate prismatic lenses (IK10 with polycarbonate or satine lenses only); or
tempered clear glass with optional
satine, opal, or microprismatic
inlays available.
7. Grommet - Rubber Grommet in
13
/16” feed hole provided for feed wire.
8. One piece Silicone Gasketing Fixture lens and end plates are fully
gasketed (IP65 rated) for weather
proofing, dust, and insect control.
9. Fixture Door - Secure, completely sealed at all points of entry
from water, insects and dust. Two
tamper-proof stainless steel screws
allow access to lamp and gear tray.
Door remains captive when servicing with corrosion protected steel
safety cable on both ends.
10. Media Trunk - Provides raceway
for additional cables, etc. and in continuous run or pattern applications.
11. Suspension Brackets - Bolted
onto fixture or media trunk, located
nominally every 4’. (Support wires or
(Scale = 1 : 8)
_
Qty:
53/8"
Type:
(135mm)
Project:
(115mm)
M125
Transit
Subway Linear Fluorescent Direct
Tunnel Recessed
rod supplied and installed by others).
12. Ø1/4" Threaded Rod - 1/4”-20
stud only. Couplers & Rod by others.
13. Rotating Crossbar - For inaccessible ceilings, adjustable for ceiling thicknesses from 1/4" to 2".
Supplied, (2) per fixture, locate 6"
(152mm) from each end of fixture.
14. Nipple Connector - (not shown)
3/8" IP nipple connector for water
tight connection between luminaires
in a run. Two connectors required
per connection. Not required when
MT is used. See p. 7 for details.
15. Emergency Battery Pack - For
details, see p. 8.
Luminaire Finish - Selux utilizes a
high quality Polyester Powder
Coating. All Selux luminaires and
poles are finished in our Tiger Drylac
certified facility and undergo a five
stage intensive pretreatment
process where product is thoroughly
cleaned, phosphated and sealed.
Selux powder coated products provide excellent salt and humidity
resistance as well as ultra violet
resistance for color retention. All
products are tested in accordance
with test specifications for coatings
from ASTM and PCI.
Selux premium colors (SP) are
available, please specify from your
Selux color selection guide.
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter
the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
M125
Transit
Subway
Tunnel
Photometry
Linear Fluorescent Direct
Recessed
M125-1T5-SI
COEFFICIENTS OF UTILIZATION - Zonal cavity method
Satine Inlay/Clear Lens
Catalog #: M125-1T5-SI-F-004
Lamp: 1F28T5 @ 2610 lumens
Report #: 21581
Luminaire Efficiency: 73%
Maximum Candela: 723 @ 18.5°
201
401
602
803
0°
90°
Vertical Plane is parallel with the lamp.
Vertical Plane is perpendicular to the lamp.
DOWNLOAD IES FILE:
http://www.selux.us/fileadmin/us/interior/ies_file/M125_IES.zip
M125-2T5-SI
ZONAL LUMEN SUMMARY
ZONE
0-30
0-40
0-60
0-90
90-180
0-180
LUMENS %LAMP
580.37
972.84
1653.6
1900.73
0.00
1900.73
22.20
37.30
63.40
72.80
0.00
72.80
%FIXT.
30.50
51.20
87
100
0
100
COEFFICIENTS OF UTILIZATION - Zonal cavity method
Satine Inlay/Clear Lens
401
Catalog #: M125-2T5-SI-F-004
Lamp: 2F28T5 @ 2610 lumens
Report #: 21580
Luminaire Efficiency: 68%
Maximum Candela: 1402 @ 8.5°
DOWNLOAD IES FILE:
803
1204
1606
http://www.selux.us/fileadmin/us/interior/ies_file/M125_IES.zip
Selux Corp. © 2013
M125R-0213-02 (ss-v1.2)
0°
90°
Vertical Plane is parallel with the lamp.
Vertical Plane is perpendicular to the lamp.
ZONAL LUMEN SUMMARY
ZONE
0-30
0-40
0-60
0-90
90-180
0-180
LUMENS %LAMP
1125.86
1863.81
3110.65
3563.2
.04
3563.24
21.60
35.70
59.60
68.30
0.00
68.30
%FIXT.
31.60
52.30
87.30
100
0
100
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
M125
Transit
Subway
Tunnel
Linear Fluorescent Direct
Recessed
Photometry (cont’d)
M125-1T8-MI
COEFFICIENTS OF UTILIZATION - Zonal cavity method
Microprismatic Inlay /
Clear Lens
Catalog #: M125-1T8-MI-F-004
Lamp: 1F32T8 @ 2850 lumens
Report #: 4030 / SX545AA6(*)
Luminaire Efficiency: 64%
Maximum Candela: 910 @ 25°
DOWNLOAD IES FILE:
RC
RW
0
1
2
3
4
5
6
7
8
9
10
235
469
0°
90°
704
939
80
70
50
30
70 50 30 10
70 50 30 10
50 30 10
50 30 10
DOWNLOAD IES FILE:
ZONAL LUMEN SUMMARY
Vertical Plane is parallel with the lamp.
ZONE
Vertical Plane is perpendicular to the lamp.
98
90
82
75
68
63
58
53
50
46
43
250
500
0°
90°
751
1001
98
86
75
66
58
52
47
42
38
35
32
98
83
70
59
51
45
39
35
31
28
25
98
80
65
54
46
39
34
30
26
23
21
96
88
80
73
66
61
56
52
48
45
42
96
84
74
65
57
51
46
41
38
34
32
96
81
69
59
50
44
39
34
31
28
25
96
79
64
54
45
39
34
29
26
23
21
Vertical Plane is parallel with the lamp.
Vertical Plane is perpendicular to the lamp.
http://www.selux.us/fileadmin/us/interior/ies_file/M125_IES.zip
M125-1T8-XX
Tempered Clear Lens
180°
0-30
0-40
0-60
0-90
90-180
0-180
90°
DOWNLOAD IES FILE:
224
448
60°
895
0°
RC
RW
0
1
2
3
4
5
6
7
8
9
10
0°
90°
671
http://www.selux.us/fileadmin/us/interior/ies_file/M125_IES.zip
Selux Corp. © 2013
M125R-0213-03 (ss-v1.2)
LUMENS %LAMP
665.04
1150.01
1793.01
1974.77
0.03
1974.8
21.50
37.10
57.80
63.70
0.00
63.70
%FIXT.
33.70
58.20
90.80
100
0
100
30°
92
81
71
62
55
49
44
40
37
33
31
92
78
67
57
49
43
38
34
30
27
25
92
76
63
53
45
38
33
29
26
23
21
88
78
68
60
53
48
43
39
35
33
30
88
76
65
55
48
42
37
33
30
27
25
88
74
61
52
44
38
33
29
26
23
21
84
75
66
58
51
46
42
38
34
32
29
84
73
63
54
47
41
37
33
29
27
24
84
72
60
51
43
37
33
29
26
23
21
83
70
58
49
42
36
31
27
24
21
19
ZONAL LUMEN SUMMARY
ZONE
0-30
0-40
0-60
0-90
90-180
0-180
LUMENS %LAMP
522.78
925.16
1691.17
2075.54
.06
2075.59
16.90
29.80
54.60
67
0
67.00
%FIXT.
25.20
44.60
81.50
100
0
100
COEFFICIENTS OF UTILIZATION - Zonal cavity method
150°
120°
Catalog #: M125-1T8-XX-F-004
Lamp: 1F32T8 @ 2850 lumens
Report #: 4031 / SX545AA7(*)
Luminaire Efficiency: 73%
Maximum Candela: 895 @ 30°
0
COEFFICIENTS OF UTILIZATION - Zonal cavity method
Prismatic Lens
Catalog #: M125-1T8-PC-F-004
Lamp: 1F32T8 @ 2850 lumens
Report #: 4029 / SX545AA5(*)
Luminaire Efficiency: 67%
Maximum Candela: 811 @ 30°
0
Effective Floor Cavity Reflectance 0.20
http://www.selux.us/fileadmin/us/interior/ies_file/M125_IES.zip
M125-1T8-PC
10
50 30 10
80
70
50
30
70 50 30 10
70 50 30 10
50 30 10
50 30 10
10
50 30 10
0
0
Effective Floor Cavity Reflectance 0.20
Vertical Plane is parallel with the lamp.
Vertical Plane is perpendicular to the lamp.
ZONAL LUMEN SUMMARY
ZONE
0-30
0-40
0-60
0-90
90-180
0-180
LUMENS %LAMP
482.86
904.48
1822.86
268.28
0.03
2268.31
15.60
29.20
58.80
73.20
0.00
73.20
%FIXT.
21.30
39.90
80.40
100
0
100
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
M125
Transit
Subway
Tunnel
Linear Fluorescent Direct
Recessed
Concrete Pour Mounting Details
Mounting hardware by others. Outlet box and lamp(s) by others. 3’ fixture shown as reference.
M125 Concrete Pour Housing (Side View)
A
B
119/32"
(41mm)
M125 Concrete Pour (Front View)
111/4"
Fixture Dependant Length
(286mm)
Removable Cover Plate
Feed Location for fixture in end cap.
Fixture supplied with 12” feed cord and
water-tight grommet
M125 Concrete Pour (End Cap Detail)
7
11/4"
/8" (32mm) Conduit Entry Holes (conduit by others)
(32mm)
11/4"
(32mm)
11/4"
/32"
(32mm)
31
1" (25mm)
321/32" (93mm)
(25mm)
51/4" (133mm)
M125 CONCRETE POUR DETAILS INDIVIDUAL LUMINAIRE
3 foot individual
4 foot individual
A (Concrete Housing)
48.50"
60.31"
(1232mm)
(1532mm)
T5
B (Flange)
45.31"
57.13"
(1151mm)
(1451mm)
A (Concrete Housing)
50.27"
62.28"
(1277mm)
(1582mm)
T8
B (Flange)
47.09"
59.09"
(1196mm)
(1501mm)
For other lengths, lamping or configurations please specify overall length (in feet), accessories desired and sketch/drawing of configuration. Selux will
detail project drawings upon order and supply submittal drawings for approval. If you have any questions, contact Selux customer service or applications
engineering for assistance (1-800-SELUX-CS).
Selux Corp. © 2013
M125R-0213-04 (ss-v1.2)
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
M125
Linear Fluorescent Direct
Recessed
Transit
Subway
Tunnel
Individual Recessed Mounting Details
Mounting hardware & lamps by others. 3’ fixture shown as reference.
Weight: 5 lbs. without MT per foot. 7.5 lbs. with MT per foot.
M125R1 Recessed Flanged Endcaps (Side View)
A
25/8" (66mm) Feed location
B
M125R1 Recessed Flanged Endcaps (Mounting view, same orientation as Front Closed View)
13
/16" (21mm) Feed Hole suitable for 1/2” (13mm) chase nipple (by others) for watertight connection. Fixture supplied with 12” feed cord and water-tight grommet.
M125R2
59/16"
M125R1
59/16"
Suspensions
(142mm)
M125R2 Recessed Flangeless Endcaps (Side View)
59/16"
(142mm)
(142mm)
C
59/16"
(142mm)
A
25/8" (66mm) Feed location
M125R1 Recessed Flanged Endcaps (Front Closed View)
2 1/2" (63mm)
1 1/2" (38mm)
M125R2
M125R1
57/8"
33/4”
(95mm) (149mm)
M125 RECESSED MOUNTING DETAILS INDIVIDUAL LUMINAIRE
3 foot individual
4 foot individual
37.01"
48.82"
T5
A
(940mm)
(1240mm)
37.95"
49.76"
B
(964mm)
(1264mm)
25.83"
37.64"
C
(656mm)
(956mm)
38.78"
50.79"
A
(985mm)
(1290mm)
T8
39.72"
51.73"
B
(1009mm)
(1314mm)
27.60"
39.61"
C
(701mm)
(1006mm)
For other lengths, lamping, continuous runs or configurations please specify overall length (in feet), accessories desired and sketch/drawing of configuration. Selux will detail project drawings upon order and supply submittal drawings for approval. If you have any questions, contact Selux customer service
or applications engineering for assistance (1-800-SELUX-CS).
Selux Corp. © 2013
M125R-0213-05 (ss-v1.2)
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
M125
Linear Fluorescent Direct
Recessed
Transit
Subway
Tunnel
Recessed Linear Run Mounting Details
Nipple Connectors provide waterproof wiring between fixtures, connected in the field. Mounting hardware and lamps by others. For custom
configurations and lengths please consult factory.
Weight: 5 lbs. without MT per foot. 7.5 lbs. with MT per foot.
M125R1/2-006-NC - 6 foot nominal Linear Run Configuration (using 2 x 3’ fixtures)
C
E
A
B
E
A
D
M125R1/2-008-NC - 8 foot nominal Linear Run Configuration (using 2 x 4’ fixtures)
C
B
E
A
A
E
D
M125R1/2-009-NC - 9 foot nominal Linear Run Configuration (using 3 x 3’ fixtures)
A
C
E
B
E
B
E
A
D
M125R1/2-010-NC - 10 foot nominal Linear Run Configuration (using 2 x 3’, 1 x 4’ fixtures)
A
E
C
E
B
3’
E
B
4’
A
3’
D
M125R1/2-012-NC - 12 foot nominal Linear Run Configuration (using 3 x 4’ fixtures)
A
C
E
B
E
B
E
A
D
M125R1/2-012-NC - 12 foot nominal Linear Run Configuration (using 3 x 4’ fixtures) (Bottom View)
M125 RECESSED MOUNTING DETAILS INDIVIDUAL LUMINAIRE
6 foot run
8 foot run
9 foot run
10 foot run
12 foot run
A
5.59"
(142mm)
B
11.26"
(286mm)
C
T5
D
(M125 R1 only)
25.83"
(656mm)
111.18" (2824mm) 112.13" (2848mm) 25.83"
(656mm)
146.62" (3724mm) 147.56" (3748mm)
(956mm)
74.09" (1882mm)
97.72" (2482mm)
75.04" (1906mm)
E
98.66" (2506mm)
37.64"
(956mm)
C
77.64" (1972mm)
T8
D
(M125 R1 only)
E
78.58" (1996mm)
27.60"
(701mm)
116.50" (2959mm) 117.44" (2983mm)
27.60"
(701mm)
101.65" (2582mm) 102.60" (2606mm)
39.61"
(1006mm)
122.99" (3124mm) 123.94" (3148mm) 3’- 25.83" (656mm) /4’- 37.64" (956mm) 128.50" (3264mm) 129.45" (3288mm) 3’- 27.60" (701mm) /4’- 39.61" (1006mm)
37.64"
152.52" (3874mm) 153.46" (3898mm)
39.61"
(1006mm)
For other lengths, lamping, continuous runs or configurations please specify overall length (in feet), accessories desired and sketch/drawing of configuration. Selux
will detail project drawings upon order and supply submittal drawings for approval. Individual fixtures cannot be field joined. If you have any questions, contact Selux
customer service or applications engineering for assistance (1-800-SELUX-CS).
Selux Corp. © 2013
M125R-0213-06 (ss-v1.2)
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
M125
Transit
Subway
Tunnel
Mounting Details
Linear Fluorescent Direct
Recessed
Standard Feed Location
For all mountings.
13
/16" (21mm) Feed Hole suitable for 1/2" (13mm) chase nipple (by others) for water-tight
connection to J-Box. Fixture supplied with 12” feed cord and water-tight grommet
23/8"
(58mm)
25/8"
(67mm)
25/8"
(66mm)
Top View
Bottom View
Nipple Connectors
Water-tight Nipple Connectors supplied for all run configurations. Nipple connectors (NC) are not needed
when Media Trunking (MT) is used.
Bottom View
415/16" (125mm)
Water-tight
Silicone Gasket
1/16” (2mm) thick,
pre-applied to one
luminaire
Inside View
Side View
Locking Nut
Nipple
Connectors
Rubber
Washer
Selux Corp. © 2013
M125R-0213-07 (ss-v1.2)
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
M125
Linear Fluorescent Direct
Recessed
Transit
Subway
Tunnel
Dimming Option Details
Dimming
DM7 (0-10V)
DMH Digital Link (4-wire)
DM4 Digital Link (4-wire)
DM3(3-wire Dim)
DMA
DM 10 (2-wire)
DM ( Non-Standard Driver)
Lamping
Voltage
T5 T5HO T8
120V
14W 54W 17W
21W
25W 277V
80W
28W
32W
14W 24W 17W 120V
21W 39W 25W
277V
28W 54W 32W
28W 54W 32W 347V
14W 24W 17W
120V
21W 39W 25W
54W
28W
32W 277V
80W
14W 24W 17W
120V
21W 39W 25W
54W
28W
32W 277V
80W
14W 24W 17W
120V
21W 39W 25W
54W
28W
32W 277V
80W
24W 17W 120V
25W
54W
277V
32W
Please specify Lamping
Manufacturers: Standard Ballast
Advance : Mark 7
Lutron : EcoSystem® H-Series
Lutron : Hi-Lume 3D
Lutron: Hi-Lume 3D
Lutron : EcoSystem
Advance: Mark 10
Please specify manufacturer and model
number
EM Stand-by Battery Packs
Selux only uses name-brand, UL-listed fluorescent EM ballasts that
in the event of a power failure, operates one of the existing lamps for
90 minutes. Comes with original manufacturer 5-year warranty. For
wiring and maintenence information, please consult factory.
End View
1.2”
(29mm)
1.2”
(30mm)
Side View
Mounting Points
Lumen Output
EM2
EM3
Lamps Operated
Most 2’-4’ T5, up to Most 2’-4’ T5, 17-40W
28W or T8 linear T8, and most HO linear
flourescent lamps
flourescent lamps
Most 2’4’ T5, up to
28W or T8 linear
flourescent lamps
Input Voltage
120/277V, 60Hz
120/277V 60Hz
120/277V 60Hz
425
500
n/a
700
Operation Time
21W T5
28W T5
39W T5HO
54W T5HO
90 min.
90 min.
Average Lumen Ratings
500
n/a
F25 T8
360
F32 T8
425
F28 T8
Selux Corp. © 2013
M125R-0213-08 (ss-v1.2)
EM1
500 Lm (1 lamp) 825 Lm (1 lamp) 1300 Lm (1 lamp)
380
90 min.
850
800
1200
825
1300
650
630
700
1100
950
990
1100
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the
function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.