LM741 Operational Amplifier

advertisement
General Description
The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements
for the 709C, LM201, MC1439 and 748 in most applications.
The amplifiers offer many features which make their application nearly foolproof: overload protection on the input and
output, no latch-up when the common mode range is exceeded, as well as freedom from oscillations.
The LM741C/LM741E are identical to the LM741/LM741A
except that the LM741C/LM741E have their performance
guaranteed over a 0˚C to +70˚C temperature range, instead
of −55˚C to +125˚C.
LM741
LM741
Operational Amplifier
LM741 Operational Amplifier
November 1994
Schematic Diagram
DS009341-1
Offset Nulling Circuit
DS009341-7
© 1997 National Semiconductor Corporation
www.national.com
DS009341
PrintDate=1997/09/16 PrintTime=10:57:44 13256 ds009341 Rev. No. 1
cmserv
Proof
1
1
Absolute Maximum Ratings
(Note *NO
TGT: FNXref NS0038*)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
(Note 5)
LM741A
LM741E
LM741
LM741C
± 22V
± 22V
± 22V
± 18V
Supply Voltage
Power Dissipation (Note 1)
500 mW
500 mW
500 mW
500 mW
± 30V
± 30V
± 30V
± 30V
Differential Input Voltage
± 15V
± 15V
± 15V
± 15V
Input Voltage (Note 2)
Output Short Circuit Duration
Continuous
Continuous
Continuous
Continuous
Operating Temperature Range
−55˚C to +125˚C
0˚C to +70˚C
−55˚C to +125˚C
0˚C to +70˚C
Storage Temperature Range
−65˚C to +150˚C
−65˚C to +150˚C
−65˚C to +150˚C
−65˚C to +150˚C
Junction Temperature
150˚C
100˚C
150˚C
100˚C
Soldering Information
N-Package (10 seconds)
260˚C
260˚C
260˚C
260˚C
J- or H-Package (10 seconds)
300˚C
300˚C
300˚C
300˚C
M-Package
Vapor Phase (60 seconds)
215˚C
215˚C
215˚C
215˚C
Infrared (15 seconds)
215˚C
215˚C
215˚C
215˚C
See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering
surface mount devices.
ESD Tolerance (Note 6)
400V
400V
400V
400V
Electrical Characteristics
(Note 3)
Parameter
Conditions
LM741A/LM741E
Min
Input Offset Voltage
Typ
Max
0.8
3.0
LM741
Min
LM741C
Typ
Max
1.0
5.0
Min
Units
Typ
Max
2.0
6.0
TA = 25˚C
RS ≤ 10 kΩ
RS ≤ 50Ω
mV
mV
TAMIN ≤ TA ≤ TAMAX
RS ≤ 50Ω
4.0
mV
RS ≤ 10 kΩ
6.0
Average Input Offset
7.5
15
mV
µV/˚C
Voltage Drift
Input Offset Voltage
TA = 25˚C, VS = ± 20V
± 10
± 15
± 15
mV
Adjustment Range
Input Offset Current
TA = 25˚C
3.0
TAMIN ≤ TA ≤ TAMAX
Average Input Offset
30
20
200
70
85
500
20
200
nA
300
nA
0.5
nA/˚C
Current Drift
Input Bias Current
TA = 25˚C
Input Resistance
TAMIN ≤ TA ≤ TAMAX
TA = 25˚C, VS = ± 20V
TAMIN ≤ TA ≤ TAMAX,
VS = ± 20V
Input Voltage Range
30
80
1.0
6.0
500
80
1.5
0.3
2.0
0.3
2.0
0.5
500
nA
0.8
µA
MΩ
MΩ
± 12
TA = 25˚C
TAMIN ≤ TA ≤ TAMAX
www.national.com
80
0.210
± 12
± 13
± 13
V
V
2
PrintDate=1997/09/16 PrintTime=10:57:46 13256 ds009341 Rev. No. 1
cmserv
Proof
2
Electrical Characteristics
(Continued)
(Note 3)
Parameter
Conditions
LM741A/LM741E
Min
Large Signal Voltage Gain
TA = 25˚C, RL ≥ 2 kΩ
VS = ± 20V, VO = ± 15V
VS = ± 15V, VO = ± 10V
Typ
Max
LM741
Min
Typ
50
200
LM741C
Max
Min
Typ
20
200
Units
Max
50
V/mV
V/mV
TAMIN ≤ TA ≤ TAMAX,
RL ≥ 2 kΩ,
VS = ± 20V, VO = ± 15V
VS = ± 15V, VO = ± 10V
Output Voltage Swing
32
V/mV
25
VS = ± 5V, VO = ± 2V
VS = ± 20V
RL ≥ 10 kΩ
RL ≥ 2 kΩ
VS = ± 15V
V/mV
± 16
± 15
V
V
RL ≥ 10 kΩ
± 12
± 10
10
Current
TAMIN ≤ TA ≤ TAMAX
10
Common-Mode
TAMIN ≤ TA ≤ TAMAX
RS ≤ 10 kΩ, VCM = ± 12V
Rejection Ratio
RS ≤ 50Ω, VCM = ± 12V
Supply Voltage Rejection
Ratio
25
35
± 14
± 13
± 12
± 10
25
± 14
± 13
V
25
mA
40
mA
70
80
95
86
96
90
70
90
dB
RS ≤ 10 kΩ
TA = 25˚C, Unity Gain
77
96
77
96
dB
µs
0.25
0.8
0.3
0.3
Overshoot
6.0
20
5
5
Slew Rate
Supply Current
Power Consumption
dB
dB
Rise Time
Bandwidth (Note 4)
V
TAMIN ≤ TA ≤ TAMAX,
VS = ± 20V to VS = ± 5V
RS ≤ 50Ω
Transient Response
V/mV
10
RL ≥ 2 kΩ
TA = 25˚C
Output Short Circuit
15
TA = 25˚C
TA = 25˚C, Unity Gain
TA = 25˚C
0.437
1.5
0.3
0.7
TA = 25˚C
VS = ± 20V
80
%
MHz
0.5
0.5
V/µs
1.7
2.8
1.7
2.8
50
85
50
85
150
mA
mW
LM741A
VS = ± 15V
VS = ± 20V
TA = TAMIN
165
mW
135
mW
LM741E
TA = TAMAX
VS = ± 20V
TA = TAMIN
150
mW
150
mW
LM741
TA = TAMAX
VS = ± 15V
TA = TAMIN
TA = TAMAX
mW
60
100
mW
45
75
mW
Note 1: For operation at elevated temperatures, these devices must be derated based on thermal resistance, and Tj max. (listed under “Absolute Maximum Ratings”). Tj = TA + (θjA PD).
Thermal Resistance
θjA (Junction to Ambient)
θjC (Junction to Case)
Cerdip (J)
DIP (N)
HO8 (H)
SO-8 (M)
100˚C/W
100˚C/W
170˚C/W
195˚C/W
N/A
N/A
25˚C/W
N/A
3
PrintDate=1997/09/16 PrintTime=10:57:50 13256 ds009341 Rev. No. 1
www.national.com
cmserv
Proof
3
Electrical Characteristics
(Continued)
Note 2: For supply voltages less than ± 15V, the absolute maximum input voltage is equal to the supply voltage.
Note 3: Unless otherwise specified, these specifications apply for VS = ± 15V, −55˚C ≤ TA ≤ +125˚C (LM741/LM741A). For the LM741C/LM741E, these specifications
are limited to 0˚C ≤ TA ≤ +70˚C.
Note 4: Calculated value from: BW (MHz) = 0.35/Rise Time(µs).
Note 5: For military specifications see RETS741X for LM741 and RETS741AX for LM741A.
Note 6: Human body model, 1.5 kΩ in series with 100 pF.
Connection Diagrams
Metal Can Package
Book
Extract
End
Dual-In-Line or S.O. Package
DS009341-2
DS009341-3
Order Number LM741H, LM741H/883 (Note 7),
LM741AH/883 or LM741CH
See NS Package Number H08C
Order Number LM741J, LM741J/883,
LM741CM, LM741CN or LM741EN
See NS Package Number J08A, M08A or N08E
Note 7: LM741H is available per JM38510/10101
Ceramic Dual-In-Line Package
Ceramic Flatpak
DS009341-6
Order Number LM741W/883
See NS Package Number W10A
DS009341-5
Order Number LM741J-14/883 (Note 8),
LM741AJ-14/883 (Note 9)
See NS Package Number J14A
Note 8: also available per JM38510/10101
Note 9: also available per JM38510/10102
www.national.com
4
PrintDate=1997/09/16 PrintTime=10:57:51 13256 ds009341 Rev. No. 1
cmserv
Proof
4
Physical Dimensions
inches (millimeters) unless otherwise noted
Metal Can Package (H)
Order Number LM741H, LM741H/883, LM741AH/883, LM741CH or LM741EH
NS Package Number H08C
Ceramic Dual-In-Line Package (J)
Order Number LM741CJ or LM741J/883
NS Package Number J08A
5
PrintDate=1997/09/16 PrintTime=10:57:52 13256 ds009341 Rev. No. 1
www.national.com
cmserv
Proof
5
Physical Dimensions
inches (millimeters) unless otherwise noted (Continued)
Ceramic Dual-In-Line Package (J)
Order Number LM741J-14/883 or LM741AJ-14/883
NS Package Number J14A
Small Outline Package (M)
Order Number LM741CM
NS Package Number M08A
www.national.com
6
PrintDate=1997/09/16 PrintTime=10:57:52 13256 ds009341 Rev. No. 1
cmserv
Proof
6
Physical Dimensions
inches (millimeters) unless otherwise noted (Continued)
Dual-In-Line Package (N)
Order Number LM741CN or LM741EN
NS Package Number N08E
10-Lead Ceramic Flatpak (W)
Order Number LM741W/883
NS Package Number W10A
7
PrintDate=1997/09/16 PrintTime=10:57:52 13256 ds009341 Rev. No. 1
www.national.com
cmserv
Proof
7
LM741 Operational Amplifier
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into
sonably expected to cause the failure of the life support
the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness.
ure to perform when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
www.national.com
8
National Semiconductor
Europe
Fax: +49 (0) 1 80-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
National Semiconductor
Hong Kong Ltd.
13th Floor, Straight Block,
Ocean Centre, 5 Canton Rd.
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
National Semiconductor
Japan Ltd.
Tel: 81-3-5620-6175
Fax: 81-3-5620-6179
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
PrintDate=1997/09/16 PrintTime=10:57:53 13256 ds009341 Rev. No. 1
cmserv
Proof
8
Download