Hazardous areas The importance of Hazardous areas cannot be

advertisement
Hazardous areas The importance of Hazardous areas cannot be underestimated. When we come across a weighing application, we are observant enough to notice if the application is in an area where there could potentially be a risk of explosion, and we will ask you as the customer to state whether we are looking at at Atex Zone. As a rule, if we are simply allowed to walk in, with no checks, it is unlikely that we are in an ‘ATEX’ Zone. However, if we are put through various procedural tasks including removal of all electrical equipment/phones and asked to complete induction courses, then we usually take this that we are entering a high risk area. It is the responsibility of you as the customer to inform us as to whether we are in an ATEX zone, and what the Zone classification is. If you as the client are unsure as to you zoning classifications, it is imperative that you gain advise from an independent competent professional who knows the requirements. Hazardous areas are separated into zones. These zones are either for gasses or for powders. Gasses Zone Zone 0 Zone 1 Zone 2 Zone 20 Zone 21 Zone 22 Description / Notes Gasses This is the most dangerous ‘Gasses’ zone. People do not usually work in this area This is an area where people work and weighing machinery is regularly used Slightly less risk than zone 1, but still very much a classified zone and still requires suitable equipment Powders This is the most dangerous ‘Powders’ zone. People do not usually work in this area This is an area where people work and weighing machinery is regularly used Slightly less risk than zone 21, but still very much a classified zone and still requires suitable equipment Suitable Equipment Link to all Zone 0 Equipment Link to all Zone 1/21 equipment Link to all Zone 2/22 equipment Link to all Zone 0/20 Equipment Link to all Zone 1/21 equipment Link to all Zone 2/22 equipment PWS & Dini Argeo s.r.l offers weighing solutions for hazardous environments classified by the ATEX 94/9/CE directives
(IV attachment).
The PWS & Dini Argeo production process is certified for the production and sale of Ex marked devices, for use in
potentially hazardous environments.
From the design of the electronic boards to the production of indicators, load cells, platforms, pallet truck scales,
crane scales, and accessories, PWS & Dini Argeo srl offers a wide range of devices for ATEX zones.
Any equipment installed should be suitable for the zone it is going in, It is imperative that the Atex certification has
been specified by you as the customer, in order for us to specify the correct equipment. We as suppliers, are not able
to advise you as to the classification of your Zones.
Hazardous area clasificaiton was recently updated (1997) ATEX is now the current standard for Hazardous areas. Any
equipment not having the word ATEX on it is most likely old and will not meet the ATEX standard. Customers with any
equipment not displaying the word ‘ATEX’ should obtain quotations for replacement equipment.
SUMMARY TABLE OF the ATEX PRODUCTS:
GAS
DUST
II 1G II 2G II 3G II 1D II 2D II 3D
Zone Zone Zone Zone Zone Zone
0
1
2
20
21
22
Product
Type
Protection degree
DFWATEX2GD
Indicator
ATEX II 2G Ex ia IIC T4 Gb
ATEX II 2D Ex tb IIIC T197°C Db IP65
●
●
●
●
DFWATEX2GDF
Indicator
ATEX II 2G Ex ia IIC T4 Gb
ATEX II 2D Ex tb IIIC T197°C Db IP65
●
●
●
●
DFWATEX3GD
Indicator
ATEX II 3G Ex nR IIC T6 Gc X
ATEX II 3D Ex tc IIIC T130°C Dc IP68 X
DFWATEX3D
Indicator
ATEX II 3D Ex tc IIIC T130°C Dc IP65 X
DFWLKI3GD
Indicator
ATEX II 3G Ex nR IIC T6 Gc X
ATEX II 3D Ex tc IIIC T130°C Dc IP68 X
●
●
3590EXT..BC3GD
Indicator
ATEX II 3G Ex nR IIC T6 Gc X
ATEX II 3D Ex tc IIIC T135°C Dc IP68 X
●
●
DGT603GD
Indicator
ATEX II 3G Ex nR IIC T6 Gc X
ATEX II 3D Ex tc IIIC T130°C Dc IP68 X
●
●
TPWX2GD
TPWX2GDI
Pallet truck scale
ATEX II 2GD IIB T4 T197°C X
TPWX3GD
TPWX3GDI
Pallet truck scale
ATEX II 3GD IIC T6 T130°C X
MCWATEX2GD
Crane scale
ATEX II 2GD IIC T4 T197°C X
●
●
●
●
MCWX2GD
Crane scale
ATEX II 2GD IIC T4 T197°C X
●
●
●
●
ZBPW
ZBSG
ZBSN
Zener
barriers
ATEX II (1) GD [Ex ia Ga] IIC [Ex ia Da] IIIC
●
●
●
●
KMB4
Box with Zener
barriers
ATEX II 3G Ex nA II T4 IP65
(-20°C ≤ Ta ≤ +40°C)
PW200XRD
Power supplier
ATEX II (2)/2 G [Ex ib]/Ex d IIC T4 Gb
ATEX II (2)/2 D [Ex ib]/Ex tb IIIC T140°C Db
●
●
●
●
DFWBP76ATEXC
Rechargeable
battery
ATEX II 2G Ex ia IIC T4 Gb
ATEX II 2D Ex tb IIIC T197°C Db IP65
●
●
●
●
BP6ESTATEX3GD
Rechargeable
battery
ATEX II 3G Ex nA IIC T6 Gc X
ATEX II 3D Ex tc IIIC T130°C Dc IP65 X
JB4QAI
Junction box
ATEX II 2G Ex ib IIC T6 Gb
ATEX II 2D Ex tb IIIC T115°C Db IP65
OBRF3GD
Radio frequency
module
ATEX II 3G Ex nA IIC T6 Gc X
ATEX II 3D Ex tc IIIC T125°C Dc IP66 X
Load cells
ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C)
TX (Ta -20÷+65°C) Ga
ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C)
TX°C (Ta -20÷+65°C) Da IP65
Platforms
ATEX II 2GD c IIC T6 85°C
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
AVAILABLE CERTIFICATES AND DECLARATIONS:
PWS & Dini Argeo srl offers a wide range of ATEX Certifications for the single products, integrated in the respective
manuals, and a wide range of ATEX Conformity Declarations for the whole systems:
CCATEX (for gas and dust):
ATEX II 1GD Certificate for load cells of the PWS & Dini Argeo range.
DCATEX2GD (for gas and dust)
Ex II 2GD IIC T4 T197°C X DECLARATION OF ATEX CONFORMITY OF THE WHOLE SYSTEM, with relative LABEL OF
THE WHOLE SYSTEM, for the ATEX Ex II 2GD weight indicator of the PWS & Dini Argeo range connected to the PWS
& Dini Argeo mechanical structure with PWS & Dini Argeo ATEX load cells (each cell must have a CCATEX
certification).
DCATEX3GD (for gas and dust):
Ex II 3GD IIC T6 T130°C X DECLARATION OF ATEX CONFORMITY OF THE WHOLE SYSTEM, with relative LABEL OF
THE WHOLE SYSTEM, for the ATEX Ex II 3GD weight indicator of the PWS & Dini Argeo range connected to the PWS
& Dini Argeo mechanical structure with PWS & Dini Argeo ATEX load cells (each cell must have a CCATEX
certification).
DCATEX3D (for dust):
Ex II 3D T130°C X DECLARATION OF ATEX CONFORMITY OF THE WHOLE SYSTEM, with relative LABEL OF THE
WHOLE SYSTEM, for the ATEX Ex II 3D weight indicator of the PWS & Dini Argeo range connected to the PWS & Dini
Argeo mechanical structure with PWS & Dini Argeo ATEX load cells (each cell must have a CCATEX certification).
DCATEX3590E3GD (for gas and dust):
Ex II 3GD IIC T6 T135°C X DECLARATION OF ATEX CONFORMITY OF THE WHOLE SYSTEM, with relative LABEL OF
THE WHOLE SYSTEM, for the 3590EXT3GD PWS & Dini Argeo ATEX weight indicator connected to the PWS & Dini
Argeo mechanical structure with PWS & Dini Argeo ATEX load cells (each cell must have a CCATEX certification).
DCATEXMB4
Ex II 2GD IIC T6 T125°C DECLARATION OF ATEX CONFORMITY OF THE WHOLE SYSTEM, with relative LABEL OF
THE WHOLE SYSTEM, for a NON ATEX weight indicator connected to the MB4 PWS & Dini Argeo zener barriers,
connected to the mechanical structure with ATEX load cells of the PWS & Dini Argeo range (each cell must have a
CCATEX certification).
DCATEXMECH
Ex II 2GD DECLARATION OF ATEX CONFORMITY OF THE WHOLE SYSTEM, with relative LABEL OF THE WHOLE
SYSTEM, for a mechanical structure with ATEX load cells of the PWS PWS & Dini Argeo range (each cell must have a
CCATEX certification).
Download