AVAILABLE NOW
EQUIPMENT NO LONGER REQUIRED TO THE ONGOING OPERATIONS OF LEADER ENERGY
Coil Tubing and Nitrogen/Fluid Pumping
Service Tractors, Trailers
& Support Equipment
Calgary, Alberta, CANADA
31555 West Fourteen Mile Road, Suite 301
Farmington Hills, Michigan 48334 USA
Ph 248-254-9999 • Fx 248-254-9995
www.hilcoind.com
A Hilco Global Company
Vested in Your Success
Hilco
TM
EQUIPMENT NO LONGER REQUIRED
TO THE ONGOING OPERATIONS OF
LEADER ENERGY
Industrial AVAILABLE NOW
COIL TUBING TRUCKS, TRAILERS,
HYDRAULIC POWER UNITS & SUPPORT
Providing a Full Range of Coiled Tubing Services
with a Depth Capacity of 5,600 Meters
700, 706 - 7 Avenue SW
Calgary, Alberta T2p0z1
CAnAdA
Please Submit
Offers
or Inquiries at
www.hilcoind.com
Or Contact
Jody Bacque at
+1 251-404-2367 or
jbacque@hilcoglobal.com
(2) COIL TUBING UNIT PACKAGES
2007
2
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)
(2) COIL TUBING UNIT PACKAGES
COIL TUBING UNIT #1 (OFFErED IN BULk, SUBjECT TO PIECEmEAL)
1 – NO. 42004 TRAILER MOUNTED COIL TUBING UNIT, VIN 2PLC052307BE12836
(2007), Consisting of: (Connected to Unit 41004) 2007 Peerless CH-52-3A
Tri-Axle Trailer, 115,159 km, Axles Rated at 22,000 Lbs. Mounted on Air Ride
Suspension, 11R24.5 Tires, 16mm Remaining Tread, Steel Fabricated Deck, (2)
Hydraulic & (2) Manual Deck Leveling Jacks, Custom Quick Connect Panel, (7) Door
Under Deck Lockable Storage Bins (Upgraded in 2010) Hydra Rig Model RT-60 Tubing
Injector, Rated at 60,000 Lbs. Pulling, 30,000 Lbs. Pushing, 200 fpm Max Speed, Set up
for 2" Tubing, Vanoil 3.06 Stripper, Aeroquip Quick Disconnect, 120 gpm Motor Flow
Setting, Manual Injector Brakes, Aluminum Telescoping Long Legs. (2) Hydraulic Hold
Down Boxes, Trailer Mounted Controls, Fall Protection Device, IC-2000 Counter,
Electronic Load Cells, Fold Down Walk Way, Lifting Slings Control Cab, Approx 6' x 7',
with Data Acquisition Software, Dual Scale Gauges, Controls, Instrumentation, Heat,
AC, Lights Lee's Quad BOP Assembly, 5-1/8" x 10,000 psi, Lubricator, Stripper
1 – NO. 41004 TRI-DRIVE WITH HYDRAULIC POWER UNIT TRACTOR,
VIN 1XKDP4EX57R997159 (2007), Consisting of: (Connected to Trailer 42004)
2007 Kenworth T800 Tri-Axle Tractor – 182,996 Kilometers Indicated, 21,419
Indicated Hours, Powered by Cummins Model ISX600 Turbo Charged Diesel
Engine, S/N 79180651 Rated at 600-HP at 1,800-RPM Unitized with Eaton Model
RTLO-18918B, 18-Speed Manual Transmission, 16,000-Lbs. Single Steer Front
Axle Mounted on 11R24.5 Tires, 20,000-Lb. Tandem Rear Axles Mounted on
11R24.5 Tires, Tractor is Equipped with 36" Sleeper, CB 2-Way Radio, Emergency
Beacons, Chains, Etc. 2010 Kincor Wet Kit, Consisting of: 5,780-Hours at Time of
Inspection, Stacking Square Tubing Custom Constructed Frame, Stamford Model
PI044E1, 10-KVA Generator, S/N X06H320375, Energized by Kubota Model
D1105-BG-ET01 Diesel Engine, S/N AKBXL01.5BCC, Rated at 17-HP at
1,800-RPM, Engine is Fitted with OMSI Model PFT-PCV/3000 Transmission,
Denison Model P14P3R1C4A2A Main Hydraulic Pump, S/N 002000545, Thermal
Exchanger, Reservoir, Instrumentation Panel, Quick Connect Board
3 – REELS, SPOKE STYLE STEEL TUBING CONSTRUCTED TUBING REEL
(42004)
VISIT OUr WEBSITE TO SUBmIT OFFErS
www.hilcoind.com
COIL TUBING UNIT #2 (OFFErED IN BULk, SUBjECT TO PIECEmEAL)
1 – NO. 42001 MOUNTED COIL TUBING UNIT, VIN 2D9LGFZ30R1016030 (1994),
Consisting of: (Connected to Unit 41001) DoePecker Tri-Axle Trailer
VIN 2D9LGFZ30R1016030 (1994) 81,265 Indicated Hours, Axles Rated at 20,000-Lbs.
Mounted on Air Ride Suspension, with 11R24.5 Tires, with Approx. 12-mm of Tread
Remaining, Steel Fabricated Deck, with (2) Hand Operated Leveling Jacks, Custom
Designed and Fabricated Quick Connect Panel & (2) Door Under Deck Lockable Storage
Bins Spoke Style Steel Tubing Constructed Tubing Reel – 106" OD x 61" Core x 48" W
Capable of Carrying, 4,500-m of 1-1/4" Tubing, Chain Driven by a Danfoss Hydraulic
Motor & is Fitted Pneumatic Brakes, with Traverse Mounted Spooler & 10,000-PSI
Circulating Iron 40 Injector S/N 35111005 with 40,000-Lb. Continuous Push / Pull Rating,
120-3 Out Side Chain, 60-3 Inside Roller Chain, (2) Pair Skate Cylinders, Spring Chain
Tensioner, Standard Hydraulic Leveling Bail Arm, Velocity Fuse on Inside of Skate Circuit,
Mechanical Snubbing Locks on Outside Chain Tension, Motion Control and Lock Valve,
Fail Safe Brakes on Injector Drive Motors and Stripper Pac-Off Hiab Cranes Model
M7-200C 7-Ton Capacity Injector Boom SN-1471 with McKisssick 4-Ton Swivel Hook
Control Cab, Approx. 6'W x 7'L, with Data Acquisition Software, Dual Scale Gauges,
Controls, Instrumentation, Heat, AC, Light, Etc. Vaniol Model #P306QB10 Quad BOP
Assembly SN-P07118 3-1/16" x 10,000-PSI, Lubricator & Stripper Tubing Inventory
Approx. 3,500-m of 1-1/4" Pipe Condition is Est. at 50% of New
1 – NO. 41001 TANDEM TRACTOR WITH HYDRAULIC POWER UNIT TRACTOR,
VIN 1XXDD40X67R930814 (2007), Consists of: (Connected with Trailer 42001) 2007
Kenworth Model T800 Tandem Axle Tractor – 185,187 Kilometers Indicated, 12,941
Hours Indicated, Powered by Cummins Model ISX565 Turbo Charged Diesel Engine,
Rated at 600-HP at 1,800-RPM Unitized with Eaton Model RTLO-18918B, 18-Speed
Manual Transmission Tractor has 13,200-Lbs. Single Steer Front Axle Mounted on
11R24.5 Tires, (2) 23,000-Lb. Tandem Rear Axles Mounted on 11R24.5 Tires, 36" Sleeper,
CB 2-Way Radio, Emergency, Chains, Etc. Kincor Wet Kit, Consisting of: Stacking Square
Tubing Custom Constructed Frame, Stamford Model PI044E1, 10-KVA Generator,
S/N X10A020067, Energized by Kubota Model D1105-BG-ET01 Diesel Engine Rated at
17-HP at 1,800-RPM, Engine is Fitted with OMSI Model PFT-PCV/3000 Transmission,
S/N AKBXL01.5BCC, Denison Model P14P3R1C4A2A Main Hydraulic Pump,
S/N 01072141, Thermal Exchanger, Reservoir, Instrumentation Panel, Quick Connect Board
3 – REELS, SPOKE STYLE STEEL TUBING CONSTRUCTED TUBING REEL (42001)
For more information, please visit us on the web at www.hilcoind.com
3
NITROGEN PUMPING UNITS • FLUID PUMPING RIG
2007
Submit Offers
at
NITrOGEN PUmPING UNITS
2 – NO’s. 20015 & 20014 FLAMELESS NITROGEN PUMPING UNITS,
180,000 At 10,000 PSI Tractors, VINs 1NKDX4EX37R930179,
1NKDX4EX27R992916 (Both 2007), Consisting of: 2007 Kenworth
T800B Tri-Drive Tractor 145,422 Kilometers Indicated, 11,946 /
14,XXX Hours Indicated, Powered by Cummins Model ISX600 Turbo
Charged Diesel Engine Rated at 600-HP at 1,800-RPM, Engine is
Utilized with Eaton Model RTLO-18918B, 18-Speed Manual
Transmission, 20,000-Lbs. Single Steer Front Axle Mounted on
315/80R.22 Tires, (3) 20,000-Lb. Tri-Drive Rear Axles Mounted on
11R24.5 Tires, Equipped with CB, 2-Way Radio, Emergency Beacons,
Chains, etc. Osmi PFT-PCV/3000 Power Transfer Box Energizing
Hydraulic Power Supply with Pump, Exchanger, Reservoir, Filters &
Interconnecting Piping 2007 3,000 Gallon Cryogenic Vessel
Alternatives Liquid N2 Tank TC-341 with Glass Insulation and
Stainless Pumping, MAWP 45-PSI at 100° F, MDMT -320° F at 45-PSI,
19,777-Lbs. Design Weight of Loading, 25,948-Lbs. Water Capacity,
Designation Stamps Include U, W & RT2 2010 Cryocanada Model
300PD Nitrogen Pump 10,000-PSI / 70-MPA, 85-M3 / Min. Max. Flow,
Dresses with 1.625" in Cold Ends Cryogenic Model ACH18HD
Nitrogen Boost Pump Powered by Parker Model 3707308 Hydraulic
Motor Exchanger, Inc. Model C250 Heat Recovery System Thermal Air
Shroud, Glycol Exchanger, Glycol Pump & Circulation Pump, Each
Hydraulically Powered CS&P Model LN2 Secondary Heat Exchanger
& Exhaust Vaporizer Pot Rated at 180,000-SCFH Custom Designed
and Fabricated Deck Mounted Operators Cab 7-1/2'W x 4'L, with
Drivers Side Man Door, Open Access to Tractor Cab, Aluminum Wrap
Around Control Housing, Lighting, Power Outlets and 3-Way Windows
Software System with Custom Designed and Fabricated Console
Mounted Panel Facilitating Various Pressure & Temperature Gauges
2012
www.hilcoind.com
FLUID PUmPING rIG
1 – NO. 50002 TRUCK MOUNTED FLUID PUMPING
RIG, VIN 1NKDX4TX6CR953906 (2012), Consisting
of: 2012 Kenworth Single Steer Tri-Drive Tractor –
73,084 Kilometers Indicated, 4,867 Hours Indicated,
Powered by Cummins Model ISX550 Turbo Charged
Diesel Engine, Rated at 550-HP at 1,800-RPM
Unitized, with Allison Automatic Transmission,
16,000-Lbs. Single Steer Front Axle Mounted on
385/65R22.5 Tires, (3) 23,000-Lb. Tandem Rear
Axles Mounted on 11R24.5 Tires, Equipped with
36" Sleeper, CB, 2-Way Radio, Emergency, Chains,
Etc. ACE Custom Designed and Fabricated Van Body
with Sectioned Operator's Cabin, Sectioned Pump
and Tank Bay, Insulation, Wiring & Heating Custom
Designed and Fabricated Control Console (Mounted
in Operator's Cabin), with LCD Panel, Instrumentation
Gauges, Hand Controls, Etc. Gardner Denver G-500
Triplex Main Fluid Pump SN M11887008001, Rated at
10,000-PSI, 500-BHP at 400-RPM, 6" Stroke Gardner
Denver 4" x 4" Feed Pump Powered by Parker
Hydraulic Motor Bowie 2" Transfer Pump Powered by
Hydraulic Pump Leader Friction Reducer Tank Leader
Lube Oil Tank Qty. 2 – Exterior Mounted Holding
Tanks 2-m3 each Piping, Consisting of: (10) Joints of
10' x 2" x 15,000-PSI Line Pipe, Complete with
Chic-Sans, Pups, Aimer Valves, Etc.
4
To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)
TANDEM AXLE TRACTOR • NITROGEN BULKERS • TRAILERS • SUPPORT EQUIPMENT
TANDEm AXLE TrACTOr
1 – NO. 82102 TANDEM-AXLE TRACTOR, VIN 1XKDD49XXYR960175
(2000), Consists of: 2000 Kenworth T800 Tandem Axle Tractor 903,035
Kilometers Indicated, 28,173 Hours Indicated, Powered by Cummins Model
ISX565 Turbo Charged Diesel Engine, S/N 30021514, Rated at 600-HP at
1,800-RPM Unitized with Eaton Model RTLO-18918B, 18-Speed Manual
Transmission, 13,200-Lbs. Single Steer Front Axle Mounted on 11R24.5
Tires, (2) 23,000-Lb. Tandem Rear Axles Mounted on 11R24.5 Tires,
Equipped with 36" Sleeper, CB 2-Way Radio
NITrOGEN BULkErS
2 – NOs. 85101 & 85104 NITROGEN BULKER 10,887-USG TANDEM-AXLE
TANKS, VIN 1C9SC43242L810006 / S/N SN-76039 (Both 2002), Consists
of: Cryogenics Vessel Alternatives 10,887-USG Lined and Insulated Tank
11,648 Kilometers Indicated, with TC Spec. 341, 90-PSI MAWP, -320 – 100°
F Design Service Temperature, Shell is Constructed of SA240-304SS at
6.35-mm, Head is Constructed of SA240-304SS at 6.75-mm, 89,616-Lb.
Water Capacity and 69,107-Lb. Design Weight of Loading, Inner Vessel has
a 72" Dia., with RT2 Radiography and (3) Traverse Baffles, Internal &
Annular Piping, with SCH 40 Penetrations, Build Pressure Coil Rated at
150-GPM at 75-PSI, Vessel is Equipped with Super Cryolite / MLI
Insulation, with Outer Jacket Constructed of A-607 Carbon Steel, with 304
Stainless Steel Rear Mounted Instrumentation Control Cabinet, Consisting
of: Pressure and Level Gauges, Relief Valves, General Valving,
Interconnecting Valving / Piping & 12-V Lighting Vessel is Mounted on CVA
Type TRA Tri-Axle Trailer, Complete with Air Ride Suspension Fitted with
Aluminum Wheels Wrapped, with 11R24.5 Tires, & Air Operated Brakes,
Landing Gear Consists of Brinkley Hand – Operated Jacks, Trailer is with
Aluminum Front and Rear Fenders, with Mud Flaps
2000
2002
TrAILErS
1 – NO. 653 REEL, FLAT DECK TRAILER, VIN 2C9PF4522FC03403274 (1985), Consists
of: Chieftain 8'W x 40'L (approx measurements) Flat deck Trailer with Wood Planking
and Dual Landing Jacks, Trailer is Mounted on Spring Ride Tandem Axles, Equipped
with Steel Wheels Mounted on 11R24.5 Tires Unit #PP 102 – Hydraulic Power Unit,
Consisting of: Daewoo Model D1146T Diesel Engine Rated, S/N EADOA407640
(New 2004), at 185-HP, 1,800-RPM, Hydraulic Pump, Reservoir, Hoses, Filters and
Interconnecting Piping, Hours N/A
1 – PEERLESS MODEL CH-36-3A TRI-AXLE TRAILER, VIN 2PLC036356BK12576
(2006), Axles are Rated at 22,000-Lbs. Mounted on Air Ride Suspension, with Air
Operated Brakes, Trailer has Wiring & Pneumatic Plumbing to Brakes
1 – NO. 45001 XL SPECIALIZED X180 TRI-AXLE DOUBLE DROP DECK MECHANICAL
GOOSENECK TRAILER, VIN 4U3J05344L004574 (2004), Consists of: 8'W x 45'L with
Steel Deck, Spring Ride Axles, Steel Wheels Mounted on 11R24.5 Tires
1 – MODEL 656 35' TRI-AXLE DROP DECK FLATBED TRAILER, VIN
2PLC037X7BJ13171 (2006), with Model CH-37-3A, 8' x 8' Parts Container with Spare
Parts and Equipment, Lee Blow Out Preventer, Lubricator
SUPPOrT EQUIPmENT
1 – IRVING MODEL RRCCW TRIPLEX NITROGEN PUMP, S/N 1220403001, with Funk
Model 5828RKG Power Transfer Box, Hydraulic Motor, Skid Standard Equipment
including, Glycol Tank, Vaporization Pot, Interconnecting Piping
1 – DAEWOO MODEL D1146TC HYDRAULIC POWER SUPPLY, S/N 506100 (2004),
Diesel Engine, Rated at 185-HP @ 1,800-RPM, Hydraulic Pump, Reservoir, Hoses,
Filters and Interconnecting Piping, Hours N/A
1 – DAEWOO MODEL D1146T HYDRAULIC POWER SUPPLY, S/N 405884 (2004),
Diesel Engine, Rated at 185-HP at 1,800-RPM, Hydraulic Pump, Reservoir, Hoses,
Filters and Interconnecting Piping, 3,014 Hours Indicated
1 – SPOKE STYLE STEEL TUBING REEL (2011), 150" OD x 94" Core x 10'4" Capable of
Carrying 5,500 m of 2" Tubing, Reel is Free Rolling, Fitted Pneumatic Brakes, Traverse
Mounted Spooler, 10,000 psi Circulating Iron (with 45001)
1 – LEE 5,000 PSI QUAD BLOW OFF PREVENTER
2 – REEL STANDS
1 – SPOKE STYLE SPOOLING REEL
For more information, please visit us on the web at www.hilcoind.com
5
OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA
Hilco
TM
EQUIPMENT NO LONGER
REQUIRED TO THE
ONGOING OPERATIONS OF
LEADER ENERGY
Industrial
AVAILABLE NOW
Coil Tubing and Nitrogen/Fluid
Pumping Service Tractors, Trailers
& Support Equipment
Follow
Us on:
Calgary, Alberta, CANADA
HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved
Printed in USA • LEA3851 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.
A Hilco Global Company
Vested in Your Success