Industrial Lighting & Area Lighting Catalogue 2015
Pole Diagram for SOLAR street light:
Only Tier 1 make poly crystalline silicon
solar panels with high efficiency & long
lifetime area used.
LED
High Lumen LED modules for maximum efficacy
with lifetime > 50,000 hrs & CRI nominal 70.
Pressure Die cast Aluminium IP66 enclosure
offer excellent water-proofing & humidity barrier.
Controller
Highly effecient controller to charge your
batteries & microcontroler controlled
algorithms for light management to
ensure maximum uptime. Microcontroller
managed algorithms autonomously determine
sunrise & sunset.
Professional Luminaires
Lighting Solutions
Specific deep discharge batteries are used
to store the energy, provide energy for
immediate requirements, and enable a backup for days when there is little or no sun.
Regional & Branch Offices:
NORTH - REGIONAL OFFICE: Corporate Office: QRG Towers, 2D, Sector-126, Expressway, Noida-201304, Tel: 0120-3331000, Delhi: Tel: 011-47676700,
23888200, Chandigarh: Tel: 0172-4232400-401, Dehradun: Tel: 0135-6670202, Noida / Haryana: Tel: 0120-3331000, Ludhiana: Tel: 0161-4676000 / 24,
Jammu: Tel: 0191-2478330, 2479330, Sri Nagar: Tel: 0194-2490431, Jaipur: Tel: 0141-3914645, 3988210 Jodhpur: Tel: 0291-9214201640 / 45,
Lucknow: Tel: 0522-6672100, Kanpur: Tel: 0512-6710400, 6710409
EAST - REGIONAL OFFICE: Kolkata: ICC Tower, 5th Floor, 4 India Exchange Place, Kolkata-700001, Tel: 033-40129851 / 52, Bhubaneshwar: Tel: 06746668101/102/103/104, Guwahati: Tel: 0361-2134521, 2458923, 2460355, Siliguri: Tel: 0353-2525907, Ranchi: 0651-2244861, 2244862, 2244864, 2244868,
2244869, Jamshedpur: Tel: 0657-6542492, 09234369436, Patna: Tel: 0612-2207221, 2207222, 2207223, 2655518
SOUTH - REGIONAL OFFICE: Chennai: Sigapi Achi Building, No. 18 / 3, 6th Floor, Rukmani Lakshmipathy Road, Egmore, Chennai-600008, Tel: 044-42280600, 605,
Bangalore: Tel: 080-49075000, Coimbatore: Tel: 0422-2305767, 2306199, 2305199, Hyderabad: Tel: 040-27533372, 27533355, 27533632,
66320407/0408/6401/6402, Kochi: Tel: 0484-4099000, Vishakapatnam: Tel: 0891-6514339, Vizag: Tel: 0891-6514339, Vijayawada: Tel: 91+9247058847/57,
Calicut: 4954019194, Madurai: 09994493242, Trivandrum: 4714015323, Hubli: 09448146028, Trichy: 09944460160
Representative Offices: • Goa • Solapur • Gwalior • Kathmandu • Bhopal
Although every effort has been made to ensure accuracy in the compilation of the technical detail within this publication,
however current details should therefore be checked with Havells Group. Specifications & performance data are constantly changing.
Havells India Ltd.
QRG Towers, 2D, Sector -126, Expressway, Noida - 201 304 (UP), Ph. +91-120-3331000,
E-mail: marketing@havells.com, www.havells.com
Consumer Care No.: 1800 11 0303, 1800 103 1313 (All Connections), 011-4166 0303 (Landline)
Join us on Facebook at www.facebook.com/havells and share your ways to save the planet!
CIN - L31900DL1983PLC016304.
LP/ZHLRC00017//MAR15/OCT15
WEST - REGIONAL OFFICE: Mumbai: 301, Everest House, 3rd Floor, 6, Suren Road, Chakala, Andheri (E). Mumbai - 400 093, Tel: 022-67298600-602,
Ahmedabad: Tel: 079-40061111, 40060738-740, Indore: Tel: 0731-2572340-41, 4009998 (Airtel), Rajkot: Tel: 0281-2481112, 2921212,
Nagpur: Tel: 0712-2240932, 2242692, 2242699 Pune: Tel: 020-64016413 / 14, Raipur: Tel: 0771-4243400 / 01, Surat: Tel: 0261-2350137, 9979890137,
Jabalpur: Tel: 0761-4064491
Industrial Lighting & Area Lighting Catalogue 2016
Brighten your World
with Havells LED
We are now in
SOLAR street light.
Havells – Lighting up the way
Solar Street light system
A LED based solar street lighting system
consists of a PV Module, control electronics,
battery, and LED based luminaries, all suitably
mounted on a pole. The battery is charged by
electricity generated through the PV module
during day time and the luminaries provides
light from dusk to dawn.
Havells India Limited is a USD 1.4 billion Indian multinational company. Havells is also the 4th
largest lighting company of the world. The company owns a large product portfolio in consumer
and professional lighting, and caters to indoor, outdoor and specialty lighting segments.
Applications
Havells’ strength is its manufacturing capability. Havells is the only company in India that
• Street Lighting
manufactures its entire lighting product portfolio in-house. The company has established a state-
• Perimeter Security Lighting
of-the-art, technologically advanced manufacturing plant at Neemrana, Rajasthan to manufacture
• Park Lighting
luminaires and fixtures. The ultra-modern manufacturing plant is a replica of Havells manufacturing
• Campus Lighting
in France, and contains sophisticated processes like robotic box bending machines. Supported
• Pathway Lighting
by German, Italian and Japanese technology, the colossal manufacturing unit is spread over 2
• Remote Area Lighting
lakh square feet, and churns out 5 million CFLs every month.
• Farm Lighting
Havells lighting business is strongly supported by its dealership network of over 20,000 across
• Ship Dock Lighting
the world. In 2007, the company made history by acquiring the legacy European lighting brand
• Railway Yard Lighting
‘Sylvania’. The acquisition strengthened Havells lighting in the global markets.
Why Havells Solar
LED Luminaire
Havells LED Luminaries delivers the best in class lumen efficacy. They deliver the maximum light
output (lumens) at the lower wattage .
About MPPT
Havells LED street lighting systems are designed with MPPT (Maximum Power Point Tracking)
which provides about 25% more efficiency by utilizing maximum energy harvested by solar PV
modules.
About Solar PV module
Highly efficient poly crystalline solar modules are used which are tested for longer durability &
manufactured with innovative technologies. These modules are designed to withstand highly
corrosive atmospheres and heavy wind loads. Also the modules are certified for industry
standards IEC61215,IEC61730( safety class 1 & 11), IEC61701 and CE.
Benefits of solar LED street lights
1. Fully Renewable and Independent Energy source.
2. Zero Carbon foot prints.
3. Easy to Install. Instant installation and ready to use.
4. No External cabling,Trenching required i.e eliminates the chance of accident due to electric
shocks, No trenching & wiring.
5. Ideal solution for Rural and remote areas where power lines are not available.
6. Independent of Grid , the operational costs are minimum.
7. Green technology.
8. No maintenance in initial years
9. Immediate Returns on Investment.
Product Offerings.
1. Standard systems ( this is offered with Preset specification with various wattages to suit,
Specs of Govt., private and PSU’s)
2. Customized solutions can be offered with one to one meeting with end user.
3. Hybrid system which would operate on AC ( alternate current, i.e in presence of GRID supply
and DC ( Direct current in ABSENCE of grid supply) it would work in Either Circumstances.
LED : Light Emitting Diode
LEDs are miniature Light Sources made of semi-conductor
material. They work on the basic principle of a p-n junction
diode. When appropriate DC voltage is applied to it, the diode
is forward biased (on), the electrons are able to recombine with
holes and energy is released in the form of light.
This effect is called electro luminescence and color of light is
determined by the energy gap of the semiconductor.
LED Lamp:
A LED lamp (also called LED bar or Illuminator) is a type of solid
state lighting (SSL) that uses light-emitting diodes (LEDs) as
the source of light. They usually comprise clusters of LEDs in a
suitable housing.
LEDs by nature emit light in a very small focused wavelength
range that is characteristic to the energy band gap of the
semiconductor. In order to overcome this, two primary methods
of creating white light from LEDs are being used, Red-GreenBlue LEDs and phosphor converted LEDs.
Why LED:
Lower Energy Consumption
Longer Lifetime
Improved Robustness
Smaller Size
Instant Start: LEDs are ideal for use in applications that are
subject to frequent on-off cycling, unlike fluorescent lamps that
burn out more quickly when cycled frequently or HID lamps that
require a long time before restarting. LEDs are easily dimmable.
Environment Friendly - Does not Contain Mercury.
Solid package of LED can be designed to focus its light.
Incandescent and Fluorescent sources require external reflector
for the same. Reduced CO2 emission
LEDs are shock resistant being solid state components.
Applications:
• Generallighting
• Lowenergyindicators
• Signage
• AutomotiveLighting
• TrafficLights
• TextandVideoDisplays.
• StreetLights
• LEDTelevision
• Communication
• Sensors
• LightMatterInteraction
1
Manufacturing
Plants
Havells - Alwar
Havells - Baddi
Havells - Neemrana
Havells Sylvania - Germany
Havells Sylvania - Colombia
Havells Sylvania - Brazil
Product Index
Industrial Lighting
Titania LED Tubelight
Page 8-9
Titania PRO LED Tubelight
Page 10-11
Regal Batten LED
Page 12-13
Magnum LED 24W
Page 14-15
Endura Magnum
20W & 40W Page 16-17
Endura Well Glass Neo
Page 18-19
Endura Highbrite
Page 20-21
Endura Bay Brite
Page 22-23
Endura Bay Brite Neo
Page 24-25
Batten EZ T5
Page 26-27
Regal Batten T5
Page 28-29
EnergyEfficient
T5 Reagl Batten
Page 30-31
Regal Batten T5 PCR/ALR
Page 32-33
Regal Batten T8 Neo
Page 34-35
Regal Batten T8 EZ
Page 36-37
Regal Batten
Page 38-39
Regal Batten PCR/ALR
Page 40-41
Prodigy
Page 42-43
Prodigy Ultra
Page 44-45
Batten Super T5
Page 46-47
Magnum 1
Page 48-49
Magnum 2
Page 50-51
VPF1NI
Page 52-53
VPF1New
Page 54-55
VPF2Premium
Page 56-57
HB/MB NI with
Al. Reflector (Open)
Page 58-59
HB/MB NI with
Al. Reflector (Closed)
Page 60-61
Chandelier Seal Beam I
Page 62-63
Highbay Neo with
Neck Reflector
Page 64-65
Uro Bay (Open)
Page 66-67
Uro Bay (Enclosed)
Page 68-69
T5 Highbay (Enclosed)
Page 70-71
Area Lighting
Jeta Neo 30 & 50
Page 74-75
Jeta Linear
Page 76-77
Jeta Neo 120/150
Page 78-79
Jeta Pro 200/240/300
Page 80-81
Jeta Mini
Page 82-83
Jeta 1
Page 84-85
Jeta 2
Page 86-87
Jeta 3 New
Page 88-89
Jeta 6 RO IP66
Page 90-91
Jeta 6 New
Page 92-93
Ranger 1 New NI
Page 94-95
Jeta Axial
Page 96-97
Ranger 2 NI
Page 98-99
Ranger 2 Oval NI
Page 100-101
Beam
Page 102-103
Professional Industrial
Lighting
Titania LED Tubelight
Ultra bright LED Tubelight (single side connection) with very high efficacy suited for
installation in existing tubelight G13 lamp holders to give glare free light.
Product Specifications
8
Benefits
Housing & Finish
Mounting
• Delivershighbrightness&excellent
illumination
• ExtraordinarylonglifeofLED’s(over
35,000 burning hrs.) & long lasting
LED driver ensures zero maintenance
• Environmentfriendlyasitdoesnot
contain Mercury
• Instantlight
• NoUVradiation
• ExcellentCRI>80
• OperatingTemp.range:
–10°C to +50°C
Elegantly designed aluminium heat sink
forefficientheatdissipationmatedwith
highefficacypolycarbonatediffuser
to provide glare free uniform light
distribution.
Perfectlyfitsintoexisting1200mmT8
Fluorescenttubelightfixtures.
System efficacy
Bestinclassefficacy>100 Lm/W which
translates into low power consumption
and high brighness.
Control gear
Inbuilt electronic driver (SMPS based
constant current supply). THD <20%.
Applications
•Corporateoffices
•ShoppingMalls
•Restaurants
•Hotels
•EducationalLighting
•Parkings
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
LHEYBWP7IG1S010
10W
240
0.060
G 13
>0.90
6500K
>100
LHLDCLXNUK7Z016
16W
240
0.080
G 13
>0.90
6500K
>100
LHLDCLXNUJ7Z018
18W
240
0.090
G 13
>0.90
6500K
>100
LHLDCLXNUJ7Z020
20W
240
0.100
G 13
>0.90
6500K
>100
Technical Drawing
A
28±1
26±1
B
Front View
13
Side View
System Power
Length (A)
Length (B)
10W
604±2
590±2
16/18/20W
1215±2
1200±2
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
9
Titania PRO LED Tubelight
UltrabrightLEDTubelight(oppositesideconnections)withveryhighefficacysuitedfor
installation in existing tubelight G13 lamp holders to give glare free light.
Product Specifications
10
Benefits
Housing & Finish
Mounting
• Delivershighbrightness&excellent
illumination
• ExtraordinarylonglifeofLED’s(over
35,000 burning hrs.) & long lasting
LED driver ensures zero maintenance
• Environmentfriendlyasitdoesnot
contain Mercury
• Instantlight
• NoUVradiation
• ExcellentCRI>80
• OperatingTemp.range:
–10°C to +50°C
Elegantly designed aluminium heat sink
forefficientheatdissipationmatedwith
highefficacypolycarbonatediffuser
to provide glare free uniform light
distribution.
CanbefixeddirectlyintotheexistingT8/
T12FTLconventionalfixtures(withelectro
magnetic ballast) after removing the starter
&newfixturecanbemanagedaccordingly.
System efficacy
•Corporateoffices
•ShoppingMalls
•Restaurants
•Hotels
•EducationalLighting
•Parkings
Bestinclassefficacy>100 Lm/W which
translates into low power consumption
and high brighness.
Control gear
Inbuilt electronic driver (SMPS based
constant current supply). THD<15%.
Applications
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
LHLDDBXEUL7Z018
18W
240
0.090
G 13
>0.90
6500K
>100
LHLDDBXEUL7Z020
20W
240
0.100
G 13
>0.90
6500K
>100
Technical Drawing
1213±2
29
31.5
1200
Front View
24
28.5
12.5
Side View
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
11
Regal Batten LED
General purpose industrial compact batten suitable for single Endura Tube Light.
Product Specifications
Housing
Electric gear
Applications
Housing & cover made up of CRCA
sheetsteel.Coverisfixedtothehousing
by means of 2 nos. bolt with engineering
plastic head.
Pre-wired with lamp holder to terminal
block & for more information refer to
*Endura Tube Light Data Sheet (Supply
connection on opposite side).
#Endura Tube Light Data Sheet (Supply
connection on one side).
•Schools
•Lobbies
•Residences
•Industrialbays
•Railwayplatforms
•Godowns/garages
Finish
Epoxy powder coated white after
phosphochromate treatment.
Lamp holders
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
12
Mounting
On ceiling/ wall with screws at a distance
of 900 mm, suspend by 2 nos. Ø19 mm
conduit pipe at a distance of 600 mm or
with chains at a distance of 700 mm.
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Colour
Temp. (CCT)
LHFYBWP1TB1W020*
1x18/22W LED T8
240
-
G 13
-
-
LHFYBYPNIA1W022#
1x18/22W LED T8
240
-
G 13
-
-
For electrical parameters refer to Endura Tube Light data sheet.
Technical Drawing
900
68±1
1224±2
Front View
38±1
Side View
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividual
points of installations are not provided with proper Earthing.
13
Magnum LED 24W
Energy saving, environmental friendly, long life, corrosion resistant, impact proof, surface
mountingluminairewithPChousinginopalfinishsuitableforwetlocationwithLEDsas
light source.
Product Specifications
14
Benefits
Housing
Electronic driver
• Highefficacy&lowerpower
consumption
• Delivershighbrightness&excellent
illumination even in high ceiling areas
• ExtraordinarylonglifeofLED’s(over
50,000 burning hrs.) & long life of high
end electronic driver (over 30,000
burning hrs.) ensures zero
maintenance
• NoUV&IRradiations
• Environmentfriendlyasitdoesnot
contain Mercury
• Instantlightwithlowrunning
temperatures
Made up of corrosion resistant round
shaped unbreakable polycarbonate
bodyinopalfinishforglarefreelight
distribution.
Powered by an in-built electronic driver
(SMPS based constant current supply)
with THD<33%.
End caps
On ceiling/ wall through 2 nos. slots
usingSSclampsprovidedwithfixture.
White coloured ABS clamps on which
snapfitSSmountingclampcanbefixed
& white coloured ABS end caps are
screwed on this clamp.
Optics
Reflector made of LEF sheet which is
pasted on Al. sheet (heat sink) on both
sides of LED strip to enhance the lumen
outputofthefixture.
Mounting
Applications
•Batteryrooms
•Coldstorage
•Chemicalfactories
•Undergroundparkings
•Thermalpowerstations
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
LHFKAWN7UC8W024
24W
240
0.110
>0.90
6000K
>85
Technical Drawing
1227
1200
1083
Top View
53
34
Ø 43
Side View
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
15
Endura Magnum 20W & 40W
Energy saving, environmental friendly, long life, corrosion resistant, impact proof, surface
mountingluminairewithPChousing&opalfinishcoversuitableforwetlocationwithLEDs
as light source.
Product Specifications
Benefits
Housing
Electronic driver
• Highefficacy(>90lm/W)&lower
power consumption
• Delivershighbrightness&excellent
illumination even in high ceiling areas
• ExtraordinarylonglifeofLED’s(over
50,000 burning hrs.) & long life of high
end electronic driver (over 30,000
burning hrs.) ensures zero
maintenance
• NoUV&IRradiations
• Environmentfriendlyasitdoesnot
contain Mercury
• Instantlightwithlowrunning
temperatures
Made up of corrosion resistant
unbreakable polycarbonate body.
Powered by an in-built electronic driver
(SMPS based constant current supply)
with THD<15%.
Cover
High quality polycarbonate diffuser in
opalfinishforglarefreeuniformlight
distribution,fixedtothehousingwithSS
snapfitclamps.
Mounting
Lamp
Applications
HighefficiencylonglifeLEDchipwith
Ra>70,lumenefficacy>125 lm/W & view
angle 120°.
•Batteryrooms
•Chillingplants
•Chemicalfactories
•Undergroundparkings
•Thermalpowerstations
Optics
Reflector made of LEF sheet which
is pasted on Al. sheet (heat sink) to
enhancethelumenoutputofthefixture.
16
On ceiling/ wall through 2 nos. slots
using SS clamps & screws provided with
fixture.
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
LHEKAWN7PZ6J020
20W
240
0.100
>0.90
6000K
>95
LHEKAWN7IZ6J040
40W
240
0.185
>0.90
6000K
>90
W
Technical Drawing
Top View
D
H
L
Front View
Side View
System Power
Length (L)
Width (W)
Height (H)
D
No. of Toggles
20W
605±2
88±2
72±2
248
8
40W
1205±2
88±2
72±2
835
14
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
17
Endura Well Glass Neo
Environmental friendly, energy saving long life corrosion resistant, vertical mounting
pressure diecast aluminium well glass luminaires with high power COB LED as light
source.
Product Specifications
18
Benefits
Housing
Finish
• Highefficacy&lowerpower
consumption
• Delivershighbrightness&excellent
illumination
• ExtraordinarylonglifeofLED’s(over
50,000 burning hrs.) & long life of high
end electronic driver (over 30,000
burning hrs.) ensures zero
maintenance
• NoUV&IRradiations
• Environmentfriendlyasitdoesnot
contain Mercury
• Instantlightwithlowrunning
temperatures
• Operatingtemp.range:
-20°C to +50°C.
Pressure die-cast aluminum alloy LM24
housing (heat sink) for effective thermal
management, sturdiness & excellent
corrosion resistant. 2 nos. cable gland
PG11 is provided at cable entry for
maintaining Ingress protection and for
providing loopin & loop-out facility.
Epoxy powder coated after
phosphochromate treatment in metallic
silverfinish.
Cover
Mounting
Control gear
In built integral electronic driver with
APFC, THD<10%.
High quality polycarbonate diffuser in
opalfinishforglarefreelightdistribution
fixedtothehousingwith5nos.SS
screws.
• Canbesuspendedbyheavydutyeye bolthookprovidedwiththefixture.
• Grubscrewisprovidedfor
locking the mounting eye-bolt.
Lamp
Applications
HighefficiencylonglifeCOBLEDchip
with Ra>70,lumenefficacy>120 lm/W &
view angle of 120° to ensure better light
distribution.
•Industrialbays
•Cementfactories
•Oilprocesslocations
•Mediumindustrialunits
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
LHEMABNDPN6S024
24W
240
0.110
>0.95
5000K
>95
LHEMABNDPN7S040
40W
240
0.180
>0.95
5000K
>85
Driver code: LSSLOX0086 for 24W, LSSLOX0063 or 40W.
Technical Drawing
ID
.5
17
214±2
128±2
254±2
±2
70
Ø1
Ø132
Top View
Front View
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
19
Endura Highbrite
Energy saving, environment friendly & robust open type vertical Highbay/Mediumbay LED
luminaire with high power COB LED as light source.
Product Specifications
Benefits
• Betterlumens&longerlamplife
• Highefficacy&lowerpower
consumption
• Delivershighbrightness&excellent
illumination
• ExtraordinarylonglifeofLED’s(over
50,000 burning hrs.) & long life high
end electronic driver ensures zero
maintenance
• NoUV&IRradiations
• Environmentfriendlyasitdoesnot
contain Mercury
• Instantlightwithlowrunning
temperatures
• Operatingtemp.range:
-10°C to +50°C
Housing
Extruded aluminium housing (heat
sink)forefficientthermalmanagement,
20
sturdiness & excellent corrosion
resistant. Pressure die-cast aluminium
housing (ADC12/LM24) for control-gear
(Breather port is provided in Control Gear
for 150W). PG7 gland is used for cable
entry for maintaining ingress protection.
Finish
Control Gear housing is epoxy powder
coated black after phosphochromate
treatment whereas heat sink is anodised
inblackfinish.
Lamp
HighefficiencylonglifeCOBLEDwity
Ra>70andlumenefficacyof120lm/W
with view angle of 120° to ensure better
uniformity of light distribution.
Optics
Aluminium spun reflector sand blasted
from inside and electrochemically
brightened.
Glass lens over COB for uniform
distribution & comfortable lighting with
beam angle of 90°.
Electronic driver
Powered by an in built, replaceable
electronic driver (SMPS based constant
current supply) with THD<10%.
Mounting
Suspended by means of heavy duty
aluminium die-cast eye-bolt provided
withthefixture.Screwisalsoprovidedin
the casting to lock the eye-bolt.
Applications
•Cement&steelplants
•Warehouses
•Factories&assemblylines
•Tollplazas
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
LHELAWUDPC5K050
50W
240
0.230
>0.90
5000K
>104
LHELAWUDUC6K090
90W
240
0.400
>0.95
5000K
>110
LHELAWUDPC5K150
150W
240
0.650
>0.95
6500K
>104
Driver code: LHGDKDDFGRB1050 for 50W, LHGDADDHGRCL090 for 90W, LHGDNDFHFSBL150 for 150W.
Technical Drawing
Ø36
Cable gland
PG 7
A
Top View
System Power
Total Ø (A)
C
B
4 Nos. mounting holes
of Ø 5 at PCD of 90 mm
for mounting refelector
Front View
Total Height (B)
Heat Sink Height (C)
50W
362±2
352±2
82±2
90W
447±2
490±2
180±2
150W
518±2
580±2
280±2
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
IP54 for optical compartment, IP65 for control gear compartment.
21
Endura Bay Brite
Energy saving, environmental friendly, long life, exclusive innovative pressure die-cast
aluminium Bay light with high power LEDs as light source, suitable for highlighting
architectural features or retail spaces.
Product Specifications
22
Benefits
Housing & Finish
Electronic driver
• Betterlumens&longerlamplife
• Highefficacy&lowerpower
consumption
• ExtraordinarylonglifeofLED’s(upto
50,000 burning hrs.) & long lasting
LED driver (upto 35,000 burning hrs.)
ensures zero maintenance
• NoUV&IRradiations
• Environmentfriendlyasitdoesnot
contain mercury
• OperatingTemp.range:
-10°C to +45°C
• Instantlightwithlowrunning
temperatures
• Significantlylowerrunningcostas
compared to conventional lighting
systems
Epoxy powder coated pressure die-cast
aluminium housing (ADC2/LM24) in
greyfinishwithelegantlydesignedheat
sinkforefficientthermalmanagement,
sturdiness & excellent corrosion
resistant. Cable gland PG7 for 80W &
PG9 for 150W is provided at cable entry
for maintaining ingress protection.
In-built, replaceable electronic driver (2
nos.) with APFC, THD<15%.
Mounting
Highqualitytoughenedglassfixedto
housing with 10 nos. SS screws.
Wall or surface mounting using
adjustable MS bracket of thickness
3mmprovidedwiththefixtureby2
elliptical slots of Ø 12.0 mm at a distance
of 148 mm & 5 holes of Ø 10.0 mm at
CD of 49.5 mm.
Allen bolt is provided for angle
adjustment.
Lamp
Applications
HighefficiencylonglifeLEDchipsin
module with Ra>70&lumenefficacy
of 130 lm/W with PMMA modular lens
plate of beam angle 90º to ensure better
uniformity of light distribution.
•Signboards
•Building&monuments
•Billboard
•Shopboard
•Petroliumcanopy
Cover
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
80W
240
0.400
>0.95
6000K
>100
LHELAWU7PN7J090
90W
240
0.400
>0.95
6000K
>90
LHELAWU7IN7J120
120W
240
0.530
>0.95
6000K
>85
LHECPCZU7IN7J150
150W
240
0.630
>0.95
6000K
>95
LHEPCOU7IN7J080
MountingFrameCodeforEnduraBayBrite80W/90W:LSSLOG0004.
Driver code: LHGDPDFHFRBL090 for 80/90W, LHGDPDDGESBL120 for 120W, LHGDPDFHESBL150 for 150W.
W
Technical Drawing
Bottom View
H
CD
L
Front View
System Power
Side View
Length (L)
Width (W)
Height (H)
No. of LED
Mounting CD
80W/90W
403±2
232±2
217±2
36
Ø 10 at 148mm
120W
514±2
291±2
236±2
48
Ø 10 at 49.5mm (5 Holes)
150W
514±2
291±2
236±2
64
Ø 10 at 49.5mm (5 Holes)
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
23
Endura Bay Brite Neo
Energy saving, environmental friendly, long life, exclusive innovative pressure die-cast
aluminium Bay light with 40 high power LEDs as light source, suitable for highlighting
architectural features or retail spaces.
Product Specifications
24
Benefits
Housing & Finish
Electronic driver
• Betterlumens&longerlamplife
• Highefficacy&lowerpower
consumption
• ExtraordinarylonglifeofLED’s(upto
50,000 burning hours) & long lasting
LED driver (upto 35,000 burning
hours) ensures zero maintenance
• NoUV&IRradiations
• Environmentfriendlyasitdoesnot
contain mercury
• OperatingTemp.range:
-10°C to +45°C
• Instantlightwithlowrunning
temperatures
• Significantlylowerrunningcostas
compared to conventional lighting
systems
Epoxy powder coated pressure die-cast
aluminium housing (ADC2/LM24) in
greyfinishwithelegantlydesignedheat
sinkforefficientthermalmanagement,
sturdiness & excellent corrosion
resistant. Cable gland PG7 is provided
at cable entry for maintaining ingress
protection.
In-built, replaceable electronic driver with
APFC, THD<10%.
Mounting
Cover
Wall or surface mounting using
adjustable MS bracket of thickness
3mmprovidedwiththefixtureby2
elliptical slots of Ø 12.0 mm at a distance
of 148 mm. Allen bolt is provided for
angle adjustment.
Highqualitytoughenedglassfixedto
housing with 10 nos. SS screws.
Applications
Lamp
HighefficiencylonglifeLEDchips
(Cree/Nichia) in module with Ra>70 &
lumenefficacyof130lm/WwithPMMA
modular lens plate of beam angle 90º
to ensure better uniformity of light
distribution.
•Signboards
•Building&monuments
•Billboard
•Shopboard
•Petroleumcanopy
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
LHELAWU7IN7J090
90W
240
0.400
>0.95
6000K
>95
MountingFrameCodeforEnduraBayBrite80W/90W:LSSLOG0004.
Driver code: LHGDPDFHFRBL090.
232±2
Technical Drawing
Bottom View
148
2 Elliptical Hole
Ø12x61 mm
35
212±2
Ø14
403±2
Front View
Side View
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
25
Batten EZ T5
Decorative ultra slim box fixture with Industrial electronic ballast suitable for single
14W/28W linear fluorescent lamp for Industries/ indoor application only.
Product Specifications
Housing
Electric gear
Made up of ultra slim CRCA sheet steel.
*Pre-wiredwith240Vratedhigh
frequency HPF electronic ballast,
THD <33% upto terminal block,
packed in gift box.
Finish
Epoxy coated white after
phosphochromate treatment.
End caps
Blue colour clip-on end caps provided as
standard.
Lamp holders
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
26
Mounting
On ceiling/ wall with screws or suspend
by stainless steel suspension wire.
Applications
•Residences
•Cleanrooms
•Covelighting
•Hospitalpremises
•Conferencerooms
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHFYBYF1OA1W014
1x14W T5 FTL
240
0.070
G5
>0.90
LHIT81128032*
1x28W T5 FTL
240
0.140
G5
>0.95
Technical Drawing
L
Electronic Ballast:
1x28W T5 FTL
Item Code: LHBT03128032
Vin; 240V, 50Hz, 0.140A, P.F.-0.95
N
P
T5 Ez
LAMP
H
Top View
Side View
W
Front View
Lamp Type
Length (L)
Width (W)
Height (H)
1x14W T5 FTL
600±1
23±1
45±1
1x28W T5 FTL
1200±1
23±1
45±1
All dimensions are in mm
27
Regal Batten T5
General purpose industrial compact batten suitable for 28W/54W (T5 FTL) single and
twin linear fluorescent lamps.
Product Specifications
Housing
Electric gear
Applications
Housing & cover made up of CRCA
sheetsteel.Coverisfixedtothehousing
by means of 2 nos. bolt with engineering
plastic head.
Pre-wired with high performance
electronic ballast (THD<33%) as a
standard.
Finish
On ceiling/ wall with screws at a distance
of 900 mm, suspend by 2 nos. Ø19 mm
conduit pipe at a distance of 600 mm or
with chains at a distance of 700 mm.
•Schools
•Industrialbays
•Railwayplatforms
•Godowns/garages
•Assemblybenches
Epoxy powder coated white after
phosphochromate treatment.
Lamp holders
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
28
Mounting
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHFYBYF1ON1W028*
1x28W T5 FTL
240
0.140
G5
>0.95
LHFYBYF2ON1W028
2x28W T5 FTL
240
0.280
G5
>0.95
LHFYBYF1IN1W054
1x54W T5 FTL
240
0.230
G5
>0.95
*With Olympian Sleek electronic ballast. Item code - LHBT02128032.
Technical Drawing
900
900
1174±2
Front View
1174±2
Front View
72±2
70±1
72±2
38±1
Side View
T5 1x28/54W
38±1
Side View
T5 2x28W
All dimensions are in mm
29
Energy Efficient T5 Regal Batten
Energyefficientindustrialcompactbattensuitablefor28W(T5FTL)singleandtwinlinear
fluorescent lamps.
Product Specifications
Housing
Electric gear
Housing & cover made up of CRCA
sheetsteel.Coverisfixedtothehousing
by means of 2 nos. bolt with engineering
plastic head.
Pre-wired with high frequency digital
ballast (THD<10%) as a standard.
Finish
On ceiling/ wall with screws or suspend
by 2 nos. Ø19 mm conduit or chain.
Epoxy powder coated white after
phosphochromate treatment.
Applications
Lamp holders
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
30
Mounting
•Schools
•Industrialbays
•Railwayplatforms
•Godowns/garages
•Assemblybenches
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHFYBYF1PB1W028
1x28W T5 FTL
240
0.140
G5
>0.98
LHFYBYF2PB1W028*
2x28W T5 FTL
240
0.280
G5
>0.98
*With program start electronic ballast. Item Code: LHGEBFDHFRA2028.
Technical Drawing
900
900
1174±2
Front View
1174±2
Front View
72±2
70±1
72±2
38±1
Side View
T5 1x28W
38±1
Side View
T5 2x28W
All dimensions are in mm
31
Regal Batten T5 PCR/ALR
General purpose industrial compact batten suitable for 28W (T5 FTL) single and twin
linear fluorescent lamps with powder coated or pre-anodised aluminium reflector.
Product Specifications
Housing
Lamp holders
Applications
Housing made up of CRCA sheet steel.
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
•Schools
•Industrialbays
•Railwayplatforms
•Godowns/garages
•Assemblybenches
Finish
Epoxy powder coated white after
phosphochromate treatment.
Reflector
Either powder coated white (PCR) after
phosphochromate treatment or high
purity pre-anodised aluminium sheet
(ALR)fixedtothehousingbymeansof2
nos. bolt with engineering plastic head.
32
Electric gear
Pre-wired with high performance
electronic ballast (THD<33%) as a
standard.
Mounting
On ceiling/ wall with screws at a distance
of 900 mm, suspend by 2 nos. Ø19 mm
conduit pipe at a distance of 600 mm or
with chains at a distance of 700 mm.
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHFYBYF1ON1W028*
LSSLOW0007
1x28W T5 FTL
240
0.140
G5
>0.95
LHFYBYF2ON1W028
LSSLOW0007
2x28W T5 FTL
240
0.280
G5
>0.95
LHFYBYF1ON1W028*
LSSLOX0021
1x28W T5 FTL
240
0.140
G5
>0.95
LHFYBYF2ON1W028
LSSLOX0021
2x28W T5 FTL
240
0.280
G5
>0.95
With PC Reflector
With AL Reflector
*With Olympian Sleek electronic ballast. Item code - LHBT02128032
Technical Drawing
900
1174±2
Front View
112±2
112±2
72±2
72±2
900
1174±2
Front View
38±1
Side View
38±1
Side View
T5 1x28W PCR/ALR
T5 2x28W PCR/ALR
All dimensions are in mm
33
Regal Batten T8 Neo
General purpose domestic compact batten suitable for 36W (T8 FTL) single linear
fluorescent lamps.
Product Specifications
Housing
Electric gear
Applications
Housing & cover made up of CRCA
sheetsteel.Coverisfixedtothehousing
by means of 2 nos. bolt with engineering
plastic head.
Pre-wiredwith230Vratedhigh
frequency HPF electronic ballast as a
standard.
•Lobbies
•Schools
•Offices
•Residences
•Conferenceroom
Finish
Not recommended for industrial 240V
application.
Epoxy powder coated white after
phosphochromate treatment.
Mounting
Lamp holders
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
34
On ceiling/ wall with screws at a distance
of 900 mm, suspend by 2 nos. Ø19 mm
conduit pipe at a distance of 600 mm or
with chains at a distance of 700 mm.
Technical Data
Ordering Code
LHFYBYG1IN1W036
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
1x36W T8 FTL
230
0.160
G 13
>0.90
With T8 Neo electronic ballast item code LHGEAFEBHOA1036.
Technical Drawing
900
68±1
1224±2
Front View
38±1
Side View
All dimensions are in mm
35
Regal Batten T8 EZ
General purpose domestic compact batten suitable for 36W (T8 FTL) single and twin
linear fluorescent lamps.
Product Specifications
Housing
Electric gear
Housing & cover made up of CRCA
sheetsteel.Coverisfixedtothehousing
by means of 2 nos. bolt with engineering
plastic head.
Pre-wired with high frequency electronic
ballast as a standard.
Epoxy powder coated white after
phosphochromate treatment.
On ceiling/ wall with screws at a distance
of 900 mm, suspend by 2 nos. Ø19 mm
conduit pipe at a distance of 600 mm or
with chains at a distance of 700 mm.
Lamp holders
Applications
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
•Lobbies
•Schools
•Offices
•Conferenceroom
Finish
36
Mounting
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHFYBYG1ON1W036
1x36W T8 FTL
240
0.160
G 13
>0.95
LHFYBYG2IN1W036
2x36W T8 FTL
240
0.320
G 13
>0.95
With T8 EZ electronic ballast item code LHGEAFDBHPA1036.
Technical Drawing
900
900
1224±2
Front View
1224±2
Front View
63±2
68±1
99±1
38±1
Side View
T8 1x36W
38±1
Side View
All dimensions are in mm
T8 2x36W
37
Regal Batten
General purpose industrial compact batten suitable for 36W (T8 FTL) single and twin
linear fluorescent lamps.
Product Specifications
Housing
Electric gear
Applications
Housing & cover made up of CRCA
sheetsteel.Coverisfixedtothehousing
by means of 2 nos. bolt with engineering
plastic head.
Pre-wired with high frequency electronic
ballast as a standard.
Option with high frequency digital ballast
(THD<10%) also available.
Finish
Mounting
•Schools
•Lobbies
•Industrialbays
•Railwayplatforms
•Godowns/garages
Epoxy powder coated white after
phosphochromate treatment.
On ceiling/ wall with screws at a distance
of 900 mm, suspend by 2 nos. Ø19 mm
conduit pipe at a distance of 600 mm or
with chains at a distance of 700 mm.
Lamp holders
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
38
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHFYBYG1OB1W036
1x36W T8 FTL
240
0.160
G 13
>0.95
LHFYBYG2ON1W036
2x36W T8 FTL
240
0.320
G 13
>0.95
LHFYBYG2IB1W036
2x36W T8 FTL
240
0.320
G 13
>0.95
LHFYBYG1PB1W036
1x36W T8 FTL
240
0.160
G 13
>0.98
LHFYBYG2PN1W036
2x36W T8 FTL
240
0.320
G 13
>0.98
EB for LHFYBYG1OB1W036 is Olympian Slim LHBF28904025.
EB for LHFYBYG2ON1W036 is Industrial Ballast LHBF07204027.
EB for LHFYBYG2IB1W036 is Olympian Slim LHBF28904025 - 2 Nos.
EB for LHFYBYG1PB1W036 is Industrial Ballast LHBF08104028.
EB for LHFYBYG2PN1W036 is Digital Ballast LHGEBFDHFRA2036.
Technical Drawing
900
900
1224±2
Front View
1224±2
Front View
63±2
68±1
99±1
38±1
Side View
T8 1x36W
38±1
Side View
T8 2x36W
All dimensions are in mm
39
Regal Batten PCR/ALR
General purpose industrial compact batten suitable for 36W (T8 FTL) single and twin
linear fluorescent lamps with MS powder coated or pre-anodised aluminium reflector.
Product Specifications
Housing
Lamp holders
Applications
Housing made up of CRCA sheet steel.
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
•Schools
•Industrialbays
•Railwayplatforms
•Godowns/garages
•Assemblybenches
Finish
Epoxy powder coated white after
phosphochromate treatment.
Reflector
Either powder coated white (PCR) after
phosphochromate treatment or high
purity pre-anodised aluminium sheet
(ALR)fixedtothehousingbymeansof2
nos. bolt with engineering plastic head.
40
Electric gear
Pre-wired with high performance
electronic ballast (THD<33%) as a
standard.
Mounting
On ceiling/ wall with screws at a distance
of 900 mm, suspend by 2 nos. Ø19 mm
conduit pipe at a distance of 600 mm or
with chains at a distance of 700 mm.
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHFYBYG1OB1W036
LSSLOW0008
1x36W T8 FTL
240
0.160
G5
>0.95
LHFYBYG2IB1W036
LSSLOW0009
2x36W T8 FTL
240
0.320
G5
>0.95
LHFYBYG1OB1W036
LSSLOX0022
1x36W T8 FTL
240
0.160
G5
>0.95
LHFYBYG2IB1W036
LSSLOX0023
2x36W T8 FTL
240
0.320
G5
>0.95
With PC Reflector
With AL Reflector
70±2
70±2
Technical Drawing
900
1224±2
Front View
900
1224±2
Front View
112±2
38±1
Side View
T8 1x36W PCR/ALR
72±2
72±2
187±2
38±1
Side View
T8 2x36W PCR/ALR
All dimensions are in mm
41
Prodigy
EnergysavingreadytouseretrofitT5luminairecompatiblewithexistingopenFTLT12
fixturebyremovingstarter.
Product Specifications
42
Benefits
Advantage
• Savesover45%energyascompared
to 40W FTL with electromagnetic
ballast
• Pre-heatstartelectroniccircuit
enhances lamp life
• Humfree&flickerfreeoperationfrom
125Vto285V
• Reducesheatloadonairconditioners
• Built-inlampageingprotection
• Overvoltageprotectionat295Vand
above
• EnergyEfficiencyIndex(EEI):A2
• Controlledharmonicdistortion
(THD<33%)
• Highpowerfactor>0.95
• Actsasaretrofitsolution
• Oldindustrialbattenconversioneasy
• IdealforconvertingT12/T8/fittingsto
T5
• Suitableforanypattifitting
(remove starter)
Applications
•Homes
•Schools/libraries
•OldGovt.offices
•Industrialbattens
•Gov.guesthouses
•Railwaywaitingrooms
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHIT12114431
1x14W T5 FTL
240
0.070
G5
>0.95
LHIT13128432
1x28W T5 FTL
240
0.140
G5
>0.95
Ensure removal of starter from old T12/ T8 fitting before fixing “Prodigy“ in and switching on.
Technical Drawing
665±2
42±1
42±1
1213±2
Side View
Side View
27±1
Front View
27±1
Front View
Prodigy 28W T5
Prodigy 14W T5
All dimensions are in mm
43
Prodigy Ultra
Generalpurposeindustrialcompact&decorativePVCbattenwithintegralwingshaped
metallizedfilmreflectorsuitablefor28W(T5FTL)singlelinearfluorescentlamps.
Product Specifications
Housing
Electric gear
HousingmadeupofPVCinwhitefinish
with decorative metallic grey coloured
end caps.
Pre-wired with integral high frequency
digital ballast (THD<10%) as per
IS:13021Part1&2.
Reflector
Mounting
Integral wing shaped metallized
aluminiumfilmreflectorforhighlight
output.
Fixed on ceiling/ wall with the help of
snap-oninstallerprovidedwithfixture.
Lamp holders
•Schools
•Industrialbays
•Railwayplatforms
•Godowns/garages
•Assemblybenches
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
44
Applications
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHFYBXF1PN1W028
1x28W T5 FTL
240
0.140
G5
>0.98
LHEYBXFGON1W028*
1x28W T5 FTL
240
0.140
G5
>0.98
*With Lamp.
45±1
Technical Drawing
1183±2
Front View
40±1
28±1
Side View
All dimensions are in mm
45
Batten Super T5
Decorative ultra slim fixture with extruded aluminium body, prismatic diffuser, snap on
installers & HF electronic ballast suitable for T5 FTL.
Product Specifications
Housing
Electric gear
Made up of ultra slim extruded aluminium
channel with rib for extra strength,
powdercoatedwithwhitefinish.
Pre-wiredwith240Vratedhigh
frequency electronic ballast, upto
terminalblock,pre-fittedwithlamp.
End caps
Mounting
Blue colour clip-on end caps provided
for better aesthetic appearance.
Fixed on wall/ ceiling with the help of
snap-on installers provided.
Diffuser
Applications
High quality polycarbonate prismatic
diffuser for glare free light.
•Residences
•Cleanrooms
•Covelighting
•Hospitalpremises
•Educationalinstitutions
•Corridors
Lamp holders
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
46
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHFYBYF1INNW028
1x28W T5 FTL
240
0.140
G5
>0.95
LHFYBYF1IN1W054
1x54W T5 FTL
240
0.350
G5
>0.55
23±1
Technical Drawing
Top View
45±2
1202±2
Front View
Side View
All dimensions are in mm
47
Magnum 1
Corrosion resistant, impact proof, surface mounting luminaire of polycarbonate housing
with transparent & reeded polycarbonate cover suitable for wet location.
Product Specifications
Housing
Electric gear
Made up of corrosion resistant
unbreakable polycarbonate body.
Pre-wired with high frequency electonic
ballast (THD<33%) upto terminal block
as standard.
Option for digital ballast (THD<10%)
available on request.
Cover
Clear polycarbonate reeded cover with
better light dispersive internal reeds.
Optics
Reflector made from powder coated
white MS sheet.
On ceiling/ wall through 2 nos. slots
using screws from the top of the
luminaire.
Lamp holder
Applications
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
48
Mounting
•Batteryrooms
•Railwaystations
•Undergroundparkings
•Thermalpowerstations
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHIF55218058
2x18W FTL HF
240
0.160
G 13
>0.95
LHIF54218058*
2x18W FTL HF
240
#
G 13
>0.95
*Emergency power pack with Ni-cd Battery. (EM-33B Basic).
Charging period 8 hours. Discharging period 120 minutes @ 20% lumen output.
Battery life-700 times charging at rated conditions.
#Depends upon charging and mains running current.
Technical Drawing
475
110+2
670+2
Front View
160+2
Side View
All dimensions are in mm
49
Magnum 2
Corrosion resistant, impact proof, surface mounting luminaire with polycarbonate housing
with transparent & reeded polycarbonate cover suitable for wet location.
Product Specifications
Housing
Electric gear
Applications
Made up of corrosion resistant
unbreakable polycarbonate body.
Pre-wired with high frequency electonic
ballast (THD<33%) upto terminal block
as standard.
Option for digital ballast (THD<10%)
available on request.
•Batteryrooms
•Chillingplants
•Chemicalfactories
•Undergroundparkings
•Thermalpowerstations
Cover
Clear polycarbonate reeded cover with
better light dispersive internal reeds.
Optics
Reflector made from powder coated
white MS sheet.
Lamp holder
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
50
Mounting
On ceiling/ wall through 2 nos. slots
using screws from the top of the
luminaire.
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHIT55128032
1x28W FTL T5
240
0.140
G 13
>0.95
LHIT56228033
2x28W FTL T5
240
0.280
G 13
>0.95
LHIT55154060
1x54W FTL T5
240
0.230
G 13
>0.98
LHIT56254071
2x54W FTL T5
240
0.460
G 13
>0.95
LHIF55136026
1x36W FTL HF
240
0.230
G 13
>0.85
LHIF56236027
2x36W FTL HF
240
0.460
G 13
>0.85
LHFKAWG1EN6J036*
1x36W FTL
240
#
G 13
>0.95
LHIF56236025*
2x36W FTL
240
#
G 13
>0.95
*Emergency power pack with Ni-cd Battery. (EM-33B Basic). #Depends upon charging and mains running current.
Charging period 8 hours. Discharging period 120 minutes @ 20% lumen output. Battery life-700 times charging at rated conditions.
Technical Drawing
H
W
D
L
Front View
Side View
MountingHolesDistance:D
Lamp Type
Length (L)
Width (W)
Height (H)
D
1x28W
1215±2
104±2
92±2
840±1
2x28W
1215±2
104±2
92±2
840±1
1x36W
1270±2
80±2
100±2
852±1
2x36W
1270±2
122±2
100±2
852±1
1x54W
1215±2
104±2
92±2
840±1
2x54W
1215±2
104±2
92±2
840±1
All dimensions are in mm
51
VPF 1 NI
Non-integral well glass luminaire, suitable for incandescent/ High Pressure Mercury
Vapour/SodiumVapour/MetalHalidelampforvapourladdenareas.
Product Specifications
Housing
Lamp holder
Applications
Single piece die-cast aluminium alloy
LM-6.
In ceramics with electrical grade brass
contacts.
Cover
Electric gear
Heat resistant glass bowl with zinc
plated/ galvanized MS wire guard.
Use appropriate CG box as per selected
HID lamp source and wattages except
for incandescent (GLS) lamp.
•Steelplants
•Industrialbays
•Thermalplants
•Cementfactories
•Mediumindustrialunits
Finish
Epoxy powder coated grey after
phosphochromate treatment.
Optics
White painted housing from inside acts
as refl ector.
52
Mounting
Suspend with 20 mm diameter threaded
GI pipe.
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
1x200W GLS
240
0.830
E 27
1.00
-
LHVM16115099*
1x125WHPMV
240
0.690
E 27
>0.85
10 mfd
LHVM16115099*
1x70WSV/MH-E
240
0.400
E 27
>0.85
10 mfd
LHVM16115099*
1x150W MH-E
240
0.820
E 27
>0.85
20 mfd
LHVS36115099*
1x150WSV-E
240
0.820
E 40
>0.85
20 mfd
LHVM16115099
*When used with appropriate rating CG box (except 200W GLS lamp).
Technical Drawing
285±2
213±2
Front View
All dimensions are in mm
53
VPF 1 New
Integralwellglassluminairesuitablefor70WHighPressureSodiumVapour/MetalHalide/
125WMercuryVapour/150WSodiumVapourlampforvapourladdenareas.
Product Specifications
Housing
Lamp holder
Applications
Single piece die-cast aluminium alloy
LM-6.
In ceramics with electrical grade brass
contacts.
Cover
Electric gear
Heat resistant glass bowl with zinc
plated/galvanized MS wire guard.
Epoxy powder coated grey after
phosphochromate treatment.
Pre-wired with power factor
improvement capacitor and impulse
ignitor for reliable ignition upto terminal
block, copper wound ferromagnetic
ballast supplied separately be wired as
per instruction.
•Steelplants
•Industrialbays
•Thermalplants
•Cementfactories
•Mediumindustrialunits
Optics
Mounting
Finish
White painted housing from inside acts
as reflector.
54
Suspend by means “U” brackets at a CD
of 105 mm.
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
LHVW16170D99*
LHBW20170036
1x70WSV/MH-E
240
0.400
E 27
>0.85
10 mfd
LHVG16112099*
LHBG08112036
1x125WMV
240
0.690
E 27
>0.85
10 mfd
LHVS26115A99*
LHBW20115036
1x150W SON-E
240
0.820
E 40
>0.85
20 mfd
*Housing consists of lamp compartment & gear box, packed separately.
Technical Drawing
A
C
2 Open Elliptical Slot Ø7x18
E
B
D
G
Lamp Type
A
B
C
D
E
F
G
70/125W
295±2
340±2
240±2
115±2
254±2
190±2
105±2
150W
350±2
422±2
274±2
134±2
316±2
220±2
105±2
F
All dimensions are in mm
55
VPF 2 Premium
Verticalmountingintegralwellglassluminaire,suitablefor70WHighPressureSodium
Vapour/MetalHalideor125WMercuryVapourlamp.
Product Specifications
Housing
Lamp holder
Applications
Single piece pressure die-cast aluminium
alloy LM-6.
In ceramics with electrical grade brass
contacts.
Cover
Electric gear
Heat resistant glass bowl with zinc
plated/galvanized MS wire guard.
Epoxy powder coated grey after
phosphochromate treatment.
Pre-wired with power factor
improvement capacitor and impulse
ignitor for reliable ignition upto terminal
block, copper wound ferromagnetic
ballast supplied separately be wired as
per instruction.
•Steelplants
•Industrialbays
•Thermalplants
•Cementfactories
•Mediumindustrialunits
Optics
Mounting
Finish
White painted circular disc acts as
reflector.
56
Suspend by means of provided heavy
duty suspension hook.
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
LHVW27170D99*
LHBW07170036
1x70WSV/MH-E
240
0.400
E 27
>0.85
10 mfd
LHVG27112099*
LHBG08112036
1x125WMV
240
0.690
E 27
>0.85
10 mfd
*Housing consists of lamp compartment & gear box, packed separately.
Technical Drawing
141.5±2
192±2
6
73.
371±2
Ø1
Top View
Front View
Side View
All dimensions are in mm
57
HB/MB NI with Al. Reflector (Open)
Open type vertical highbay/ mediumbay luminaire suitable for 85W retro CFL and
150W/250W/400WHighPressureSodiumVapourellipticalcoatedlamp.
Product Specifications
Housing
*Electric gear
Housing & cover deep drawn from EDD
grade steel sheet.
Select appropriate control gear as per
selected HID Lamp source & wattage.
Finish
*Not applicable for 85W Retrofit CFL.
Epoxy powder coated grey after
phosphochromate treatment.
Mounting
Optics
Spun aluminium reflector
electrochemically brightened, anodised
outside and sand blasted from inside.
Lamp holder
In ceramics with electrical grade brass
contacts.
58
Suspend by means of provided heavy
duty suspension hook.
Applications
•Steelplants
•Warehouses
•Thermalplants
•Heavyengg.industries
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
LHYW12185099
LHYW04125099**
1x85W Retro CFL
240
0.650
E 27
>0.55
-
LHYW12140099
LHYW04125099**
1x150WSV-E
240
0.820
E 40
>0.85
20 mfd
LHYW12140099
LHYW04125099**
1x250WSV-E
240
1.320
E 40
>0.85
33 mfd
LHYW12140099
LHYW02140099**
1x400WSV-E
240
2.200
E 40
>0.85
42 mfd
Electrical data shown here is symbolic for actual data refer to control gear used.
**Reflectors supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
Technical Drawing
Top View
Ord. Code
Length (L)
Height (H)
LHYW04125099
403±2
460±2
LHYW02140099
523±2
500±2
H
1
Ø80±
L
Front View
All dimensions are in mm
59
HB/MB NI with Al. Reflector (Closed)
Enclosed type vertical highbay/ mediumbay luminaire (with glass) suitable for 150W/
250W/400WHighPressureSodiumVapour/MetalHalideellipticalcoatedlamp.
Product Specifications
Housing
Optics
Mounting
Housing & cover deep drawn from EDD
grade steel sheet.
Spun aluminium reflector
electrochemically brightened, anodised
outside and sand blasted from inside.
Suspend by means of provided heavy
duty suspension hook.
Thermal shock proof, impact resistant,
tempered and toughened protective
5mmthickglassfixedtothereflectorby
3 nos. toggles.
Lamp holder
•Steelplants
•Warehouses
•Thermalplants
•Heavyengg.industries
Finish
Select appropriate control gear as per
selected HID Lamp source & wattage.
Cover
Epoxy powder coated grey after
phosphochromate treatment.
60
In ceramics with electrical grade brass
contacts.
Electric gear
Applications
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
LHYW12185099
LHYW04125099*
LHYW23125099**
1x150W MH-E
240
0.820
E 27
>0.55
20 mfd
LHYW12140099
LHYW04125099*
LHYW23125099**
1x150WSV-E/
150W CMI-TT Plus
240
0.820
E 40
>0.85
20 mfd
LHYW12140099
LHYW04125099*
LHYW23125099**
1x250WSV/MH-E
240
1.320
E 40
>0.85
33 mfd
LHYW12140099
LHYW02140099*
LHYW21140099**
1x400WSV/MH-E
240
2.200
E 40
>0.85
42 mfd
Electrical data shown here is symbolic for actual data refer to control gear used.
*Reflectors/ **Glass supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
H
Technical Drawing
Top View
Ord. Code
Length (L)
Height (H)
LHYW04125099
406±2
463±2
LHYW02140099
526±2
503±2
L
Front View
All dimensions are in mm
61
Chandelier Seal Beam I
Decorative, contrast reducing translucent polycarbonate highbay suitable for 70W/150W
ellipticalcoatedHighPressureSodiumVapour/MetalHalide/CMI-TTPluslamp.
Product Specifications
Housing
Lamp holder
Applications
Pressure die-cast aluminium LM24.
In ceramics with electrical grade brass
contacts.
•Arrivalhalls
•Shoppingmalls
•Airportwaitinglounges
•Publiccirculatingareas
Cover
Conicalfoodgrade&UVstabilised
polycarbonate sagged lens.
Finish
Epoxy powder coated grey after
phosphochromate treatment.
Optics
Injection moulded food grade &
UVstabilisedpolycarbonatewith
precisely contoured prismatic internal
facets ensures uniform & better light
distribution.
62
Electric gear
Pre-wired with power factor
improvement capacitor and impulse
ignitor for reliable ignition upto terminal
block, copper wound ferromagnetic
ballast supplied separately be wired as
per instruction.
Mounting
Suspend by means of 12mm diameter
threaded G.I. pipe.
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
LHYW05170C99
LHBW07170036
LHYW05115099*
1x70WSV/MH-E/
70W CMI-TT Plus
240
0.400
E 27
>0.85
10 mfd
LHYW05115C99
LHBW20115036
LHYW05115099*
1x150W MH-E/
150W CMI-TT Plus
240
0.820
E 27
>0.85
20 mfd
*Refractor and cover supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
Technical Drawing
Ø141
Top View
426±3
Ø330
Ø4
PC .5 3 H
D Ø ol
12 es fo
5.8
r
Ø330
Front View
All dimensions are in mm
63
Highbay Neo with
Neck Reflector
VerticalopentypehighbaylumianiresuitableforellipticalcoatedHighPressureSodium
Vapour/MercuryVapourlampupto250W.
Product Specifications
Housing
Electric gear
Pressure die-cast Al. housing with loop
in - loop out facility (optional).
Epoxy powder coated grey after
phosphochromate treatment.
Pre-wired with power factor
improvement capacitor and impulse
ignitor for reliable ignition upto terminal
block, copper wound ferromagnetic
ballast supplied separately be wired as
per instruction.
Optics
Mounting
Finish
Spun aluminium reflector
electrochemically brightened, anodised
outside and sand blasted from inside.
Lamp holder
In ceramics with electrical grade brass
contacts.
64
Suspend by means of provided heavy
duty suspension hook.
Applications
•Steelplants
•Warehouses
•Thermalplants
•Heavyengg.industries
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
LHFLAQV1AA6H150
LHBW20115036
LSSLOS0002*
LSSLOX0028**
1x150WSV/MH-E/
1x150 CMI-TT Plus
240
0.820
E 40
>0.85
20 mfd
LHFLAQV1AA6H250
LHBW00125036
LSSLOS0002*
1x250WSV-E
240
1.320
E 40
>0.85
33 mfd
*Reflectors/**Glass supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
Technical Drawing
308±2
620±3
316
Ø11
Ø 385
All dimensions are in mm
65
Uro Bay (Open)
Verticalhighbay/mediumbayluminairesuitableforHighPressureellipticalcoatedSodium
Vapourlampupto400W.
Product Specifications
Housing
Electric gear
Pressure die-cast aluminium alloy LM6.
Pre-wired with power factor
improvement capacitor and SI ignitor
for reliable ignition upto terminal block,
copper wound ferromagnetic ballast
supplied separately, to be wired as per
instruction.
Finish
Epoxy powder coated grey color after
phosphochromate treatment.
Optics
Spun aluminium reflector
electrochemically brightened, anodised
outside and sand blasted from inside.
Mounting
Lamp holder
Applications
In ceramics with electrical grade brass
contacts.
66
Mounting by means of hook provided on
top housing.
•Steelplants
•Warehouses
•Thermalplants
•Heavyengg.industries
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
LHYW10115D99
LHBW20115036
LHYW10140099*
1x150WSV-E
240
0.820
E 40
>0.85
20 mfd
LHYW10125D99
LHBW00125036
LHYW10140099*
1x250WSV-E
240
1.320
E 40
>0.85
33 mfd
LHYW10140D99
LHGMCKENEBE1400
LHYW10140099*
1x400WSV-E
240
2.200
E 40
>0.85
42 mfd
*Reflectors supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
633±3
Technical Drawing
Top View
430±1
Front View
All dimensions are in mm
67
Uro Bay (Enclosed)
Vertical highbay/ mediumbay luminaire (with glass) suitable for High Pressure elliptical
coatedSodiumVapour/MetalHalidelampupto400W.
Product Specifications
Housing
Electric gear
Pressure die-cast aluminium housing
with cooling serrations on side.
Epoxy powder coated grey color after
phosphochromate treatment.
Pre-wired with power factor
improvement capacitor and SI ignitor
for reliable ignition upto terminal block,
copper wound ferromagnetic ballast
supplied separately, to be wired as per
instruction.
Optics
Mounting
Finish
Spun aluminium reflector
electrochemically brightened, anodised
outside and sand blasted from inside.
Lamp holder
In ceramics with electrical grade brass
contacts.
68
Mounting by means of hook provided on
top housing.
Applications
•Steelplants
•Warehouses
•Thermalplants
•Heavyengg.industries
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
LHYW10115D99
LHBW20115036
LHYW10140099*
LHYW35140199**
1x150WSV/MH-E/
CMI-TT Plus
240
0.820
E 40
>0.85
20 mfd
LHYW10125D99
LHBW00125036
LHYW10140099*
LHYW35140199**
1x250WSV/MH-E
240
1.320
E 40
>0.85
33 mfd
LHYW10140D99
LHGMCKENEBE1400
LHYW10140099*
LHYW35140199**
1x400WSV/MH-E
240
2.200
E 40
>0.85
42 mfd
*Reflectors/ **Glass supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
637±3
Technical Drawing
Top View
434±1
Front View
All dimensions are in mm
69
T5 Highbay (Enclosed)
Highbay range of luminaires with specially designed reflectors and suitable for 4x14W,
4x24W, 4x28W, 4x54W & 6x54W T5 FTL Lamps.
Product Specifications
Housing
Lamp holder
Applications
Made up of CRCA sheet steel.
Pushfitrotarytypewhitepolycarbonate/
PBT with electrical grade brass contacts.
•Warehouses
•Industrialsheds
•Railwaystations
•Doubleheightlobbies
Finish
Epoxy powder coated white after
phosphochromate treatment.
Optics
Reflector made up of high purity preanodised aluminium sheet. Designed
for symmetric light distribution for
high vertical illuminance covered with
UVstabilisedmethacrylatecoveras
standard.
*Option for polycarbonate cover available
on request.
70
Electric gear
Pre-wired with HF high performance
electronic ballast (THD<33%) as a
standard.
Option of high frequency digital ballast
(THD<10%) available on request.
Mounting
Provision for suspension through Ø19
mm conduit or on ceiling with 4 nos.
holes of Ø5 mm.
Technical Data
Ordering Code
LHIT01414040
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
4x14W T5 FTL
240
0.280
G5
>0.95
>0.95
LHIT01424034
4x24W T5 FTL
240
0.440
G5
LHIT01428033
4x28W T5 FTL
240
0.560
G5
>0.95
LHIT01454071
4x54W T5 FTL
240
0.920
G5
>0.95
LHFLAQL7IA5W054
6x54W T5 FTL
240
1.440
G5
>0.95
LHIT02428051*
4x28W T5 FTL
240
0.560
G5
>0.98
*With polycarbonate cover.
W
Technical Drawing
Top View
H
L
Front View
Side View
Lamp Type
Length (L)
Width (W)
Height (H)
4x14/ 4x24W T5 FTL
595±2
400±2
50±1
4x28/ 4x54W T5 FTL
1196±2
400±2
50±1
6x54W T5 FTL
1218±2
555±2
50±1
All dimensions are in mm
71
72
Professional Area
Lighting
73
Jeta Neo 30 & 50
Environmental friendly, energy saving, long life, exclusive innovative pressure die-cast
aluminium flood light with high power COB LED as light source, suitable for highlighting
architectural features or retail spaces.
Product Specifications
74
Benefits
Housing & Finish
Optics
• Betterlumens&longerlamplife
• Highefficacy&lowerpower
consumption
• ExtraordinarylonglifeofLED’s(upto
50,000 burning hrs.) & long lasting
LED driver (upto 35,000 burning hrs.)
ensures zero maintenance
• NoUV&IRradiations
• Environmentfriendlyasitdoesnot
contain Mercury
• OperatingTemp.range:
-20°C to +45°C
• Instantlightwithlowrunning
temperatures
• Significantlylowerrunningcostas
compared to conventional tunnel
lighting systems
Epoxy powder coated pressure die-cast
aluminium housing (ADC12/LM24) in
whitefinishwithelegantlydesignedheat
sinkforefficientthermalmanagement,
sturdiness & excellent corrosion
resistant. Cable gland PG9 is provided
at cable entry for maintaining ingress
protection.
Reflector made up of high purity matt
finishanodizedaluminiumsheet.
Cover
Highqualitytoughenedglassfixedto
housing with 4 nos. screws.
Lamp
HighefficiencylonglifeCOBLEDwith
Ra>70&lumenefficacyof110lm/W
with beam angle 120º to ensure better
uniformity of light distribution.
Electronic driver
In-built, replaceable electronic driver with
APFC, THD<33%.
Mounting
Wall or surface mounting using
adjustable MS bracket of thickness
2.5mmprovidedwiththefixtureby2
elliptical slots of Ø 10mm at a distance
of 90mm for 30W and at a distance of
137mm for 50W.
Applications
•Signboards
•Building&monuments
•Billboard
•Shopboard
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
LHEPBFUEIN6W030
30W
240
0.140
>0.95
5000K
>80
LHEPBFUEIN6W050
50W
240
0.230
>0.95
5000K
>80
Driver code: LHGDRDCBHOA1030 for 30W, LHGDVDDBHQB1050 for 50W.
Technical Drawing
W
25.2
D
Top View
L
Front View
H
Side View
System Power
Length (L)
Width (W)
Height (H)
Mounting Hole Distance (D)
30W LED
225±2
186±2
151±2
90±1
50W LED
287±2
237±2
170±2
137±1
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
75
Jeta Linear
Energy saving, environmental friendly, long life, exclusive innovative extruded aluminium
flood light with high power LEDs as light source, suitable for highlighting architectural
features, retail spaces or border areas.
Product Specifications
76
Benefits
Housing & Finish
Electronic driver
• Betterlumens&longerlamplife
• Highefficacy&lowerpower
consumption
• ExtraordinarylonglifeofLED’s(upto
50,000 burning hrs.) & long lasting
LED driver (upto 35,000 burning hrs.)
ensures zero maintenance
• NoUV&IRradiations
• Environmentfriendlyasitdoesnot
contain mercury
• OperatingTemp.range:
–20°C to +45°C
• Instantlightwithlowrunning
temperatures
• Significantlylowerrunningcostas
compared to conventional tunnel
lighting systems
Anodised black extruded aluminium
housing with elegantly designed heat
sinkforefficientthermalmanagement,
sturdiness & excellent corrosion
resistant. Cable gland PG7 is provided
at cable entry for maintaining ingress
protection.
In-built electronic driver with 2 output
channel each with APFC, THD<15%,
Output Short Circuit Protection, Over
VoltageProtection,SurgeVoltage
Protection & other reliability tests as per
IS:15885Part2/Sec13.
Cover
Wall or surface mounting using
adjustableV-shapedAluminiumbracket
of thickness 3.5 mm provided with the
fixtureby2ellipticalslotsofØ7.5mm.
Highqualitytoughenedglassfixedto
housing with silicon glue.
Lamp
HighefficiencylonglifeLEDchipsin
module with Ra>70&lumenefficacy
of 120 lm/W with PMMA modular lens
plate of beam angle 45º to ensure better
uniformity of light distribution.
Mounting
Applications
•Signboards
•Building&monuments
•Billboard
•Shopboard
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
LHEUACN7PN6K080
80W
240
0.340
>0.98
6000K
>90
LHEUACN7PN6K100
100W
240
0.450
>0.95
6000K
>90
LHEUACN7PN6K150
150W
240
0.640
>0.95
6000K
>90
Driver code: LHGDDDBHGRBL080 for 80W, LHGDIDCHERBL100 for 100W, LHGDDDEHERBL150 for 150W.
Technical Drawing
17
B
D
Ø13
Bottom View
A
C
Top View
Cable Gland PG7
Side View
System
Power
Length
(A)
Width
(B)
Height
(C)
Mounting CD
(D)
No. of
LED
80W
422±2
230±2
177±2
2 Elliptical Hole Ø 13x50 at CD 199
32
100W
516±2
230±2
177±2
2 Elliptical Hole Ø 13x50 at CD 245
40
150W
630±2
230±2
177±2
2 Elliptical Hole Ø 13x75 at CD 310
64
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
77
Jeta Neo 120/150
Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium
flood light with high power LEDs as light source, suitable for highlighting architectural
features or retail spaces.
Product Specifications
78
Benefits
Housing & Finish
Electronic driver
• Betterlumens&longerlamplife
• Highefficacy&lowerpower
consumption
• ExtraordinarylonglifeofLED’s(upto
50,000 burning hrs.) & long lasting
LED driver (upto 35,000 burning hrs.)
ensures zero maintenance
• NoUV&IRradiations
• Environmentfriendlyasitdoesnot
contain Mercury
• OperatingTemp.range:
-20°C to +45°C
• Instantlightwithlowrunning
temperatures
• Significantlylowerrunningcostas
compared to conventional tunnel
lighting systems
Epoxy powder coated die-cast
aluminiumhousing(LM24)ingreyfinish
with elegantly designed heat sink for
efficientthermalmanagement,sturdiness
& excellent corrosion resistant. Cable
gland PG9 is provided at cable entry for
maintaining ingress protection.
In-built electronic driver (with 2 output
channel each) with APFC, THD<10%.
Cover
Highqualitytoughenedglassfixedto
housing with 8 nos. screws.
Lamp
HighefficiencylonglifeLEDchipsin
module with Ra>70&lumenefficacy
of 135 lm/W with PMMA modular lens
plate of beam angle 45º to ensure better
uniformity of light distribution.
Mounting
Wall or surface mounting using
adjustable MS bracket of thickness
2.5mmprovidedwiththefixtureby2
elliptical slots of Ø 9.0mm at a distance
of 146mm for 120W, Ø 12.5mm at a
distance of 178mm for 150W.
Applications
•Signboards
•Building&monuments
•Billboard
•Shopboard
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
LHEPCZU7P46J120
120W
240
0.640
>0.98
6000K
>80
LHEPCZU7P46J150
150W
240
0.640
>0.98
6000K
>80
Driver code: LHGDDDCHERBL120 for 120W, LHGDDDEHERBL150 for 150W.
Technical Drawing
D
Top View
68
H
Locking
Bolt
L
Front View
W
Side View
System
Power
Length
(L)
Width
(W)
Height
(H)
No. of
LED
Mounting Hole
Distance (D)
120W
427±2
325±2
200±2
48
146±1
150W
427±2
325±2
236±2
64
178±1
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
79
Jeta Pro 200/240/300
Energy saving, environmental friendly, long life, exclusive innovative pressure die-cast
aluminium flood light with high power LEDs as light source, suitable for highlighting
architectural features or retail spaces.
Product Specifications
80
Benefits
Housing & Finish
Electronic driver
• Betterlumens&longerlamplife
• Highefficacy&lowerpower
consumption
• ExtraordinarylonglifeofLED’s(upto
50,000 burning hrs.) & long lasting
LED driver (upto 35,000 burning hrs.)
ensures zero maintenance
• NoUV&IRradiations
• Environmentfriendlyasitdoesnot
contain Mercury
• OperatingTemp.range:
-10°C to +45°C
• Instantlightwithlowrunning
temperatures
• Significantlylowerrunningcostas
compared to conventional tunnel
lighting systems
Epoxy powder coated pressure die-cast
aluminiumhousing(LM24)ingreyfinish
with elegantly designed heat sink for
efficientthermalmanagement,sturdiness
& excellent corrosion resistant. Cable
gland is provided at cable entry for
maintaining ingress protection.
In-built (2 nos.) electronic driver (with
2 output channel each) with APFC,
THD<10%.
Mounting
Cover
Wall or surface mounting using
adjustable MS bracket of thickness
2.5mmprovidedwiththefixtureby2
elliptical slots.
Highqualitytoughenedglassfixedto
housing with SS screws.
Applications
Lamp
HighefficiencylonglifeLEDchipsin
module with Ra>70&lumenefficacy
of 130 lm/W with PMMA modular lens
plate of beam angle 45º to ensure better
uniformity of light distribution.
•Signboards
•Building&monuments
•Billboard
•Shopboard
Technical Data
Ordering
Code
System
Power
Nominal
Voltage (V)
Mains
Current (A)
Power
Factor
Colour
Temp. (CCT)
System Luminous
Efficacy Lm/ W
LHEPDFU7P47J200
200W
240
0.920
>0.90
6000K
>80
LHEPDFU7P46J240
240W
240
1.100
>0.90
6000K
>80
LHEPDFU7P46J300
300W
240
1.390
>0.90
6000K
>85
Technical Drawing
39.5
52.5
H
D
Top View
L
Front View
W
Side View
System
Power
Length
(L)
Width
(W)
Height
(H)
Mounting CD
(D)
No. of
LED
200W
526±2
325±2
252±2
178
96
240W
526±2
325±2
252±2
178
96
300W
665±2
330±2
257±2
178
128
All dimensions are in mm
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsof
installations are not provided with proper Earthing.
81
Jeta Mini
Mini flood light luminaire suitable for 150W Linear Tungsten Halogen double ended lamp.
Product Specifications
Housing
Lamp holder
Pressure die-cast aluminium alloy LM24
in IP55 protection.
In ceramics with silver plated contacts.
Cover
Surface mounting using built in MS
powder coated bracket.
Tempered protective toughened glass,
5mm thick, thermal shock and impact
resistant.
Finish
Epoxy black powder coated after
phosphochromate treatment.
Optics
Symmetrical reflector is made of high
purity pre-anodised dimpled aluminium
sheet.
82
Mounting
Applications
•Billboards
•Shopboards
•Housefunctions
•Garden&parks
Technical Data
Ordering Code
LHFH05115099
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
150W Halogen
240
0.625
Rx7s
1.00
Technical Drawing
141±1
185±2
90±1
Side View
52±1
Front View
All dimensions are in mm
83
Jeta 1
Flood light luminaire suitable for 500W Linear Tungsten Halogen/70W Metal Halide double
ended lamp.
Product Specifications
Housing
Lamp holder
Pressure die-cast aluminium alloy LM24
in IP55 protection.
In ceramics & silver plated contacts.
Cover
Use appropriate control gear, when
luminaire used with 70W High Pressure
Metal Halide double ended lamp.
Tempered protective toughened glass,
5mm thick, thermal shock & impact
resistant.
Finish
Epoxy powder coated black after
phosphochromate treatment.
Optics
Reflectors made of high purity pre
anodised dimpled aluminium sheet.
84
Electric gear
Mounting
Wall/ surface mounting using bracket.
Applications
•Signboards
•Emergencyareas
•Constructionsites
•Pedestriancrossings
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHFH05150099
500W Halogen
240
2.080
Rx7s
1.00
Technical Drawing
185±2
263±2
128±2
Side View
68±1
Front View
All dimensions are in mm
85
Jeta 2
Flood light luminaire suitable for 1000W Linear Tungsten Halogen lamp.
Product Specifications
Housing
Lamp holder
Pressure die-cast aluminium alloy LM24
in IP55 protection.
In ceramics & silver plated contacts.
Cover
Wall/ surface mounting using bracket.
Tempered protective toughened glass,
5mm thick, thermal shock & impact
resistant.
Finish
Epoxy powder coated black after
phosphochromate treatment.
Optics
Reflectors made of high purity pre
anodised dimpled aluminium sheet.
86
Mounting
Applications
•Signboards
•Emergencyareas
•Constructionsites
•Pedestriancrossings
•Sportsarena
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
LHFH05110099
1000W Halogen
240
4.160
Rx7s
1.00
Technical Drawing
276±2
300±2
140±1
Side View
100±2
Front View
All dimensions are in mm
87
Jeta 3 New
Integral wide beam flood light luminaire suitable for 70/150W High Pressure Metal Halide
double ended lamp.
Product Specifications
Housing
Optics
Mounting
Pressure die-cast aluminium alloy LM24
forefficientthermalmanagement,
sturdiness & excellent corrosion
resistant. PG 11 cable gland is provided
at cable entry for maintaining ingress
protection.
Reflectors made of high purity dimpled
pre-anodised aluminium sheet for wide
beam. Available in Assymmetric version.
Surface mounting using built in heavy
duty bracket.
Lamp holder
Cover
Electric gear
•Signboards
•Industrialareas
•Constructionsites
•Monuments&facadelighting
•Sportscomplex
Tempered protective toughened front
glass, 5mm thick, thermal shock and
impactresistant,fixedwithquick
release hinge-clips for in-position lamp
replacement.
Finish
Epoxy white powder coated after
phosphochromate treatment.
88
In ceramics with silver plated contacts.
Pre-wired with power factor improvement
capacitor and super imposed ignitor
for reliable ignition upto terminal block,
copper wound ferromagnetic ballast
supplied separately to be wired as per
instruction.
Applications
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
LHFM04170D99
LHBW07170036
1x70W MH DE
240
0.400
Rx7s
>0.85
10 mfd
LHFM04115D99
LHBW20115036
1x150W MH DE
240
0.820
Rx7s
>0.85
20 mfd
Also suitable for 70/150W HPSV double ended lamps.
Technical Drawing
365±2
432±2
81±2
JETA 3
IP65
3H
ole
275±2
Top View
Side View
99
Front View
sØ
11
mm
All dimensions are in mm
89
Jeta 6 RO IP66
Integral wide beam long throw flood light luminaire suitable for single tubular 250W/ 400W
HighPressureSodiumVapour/MetalHalidelamp.
Product Specifications
Housing
Optics
Mounting
Pressure die-cast aluminium alloy LM24
with dual compartment for better heat
desipation.
Reflectors made of high purity preanodised dimpled aluminium sheet for
wide beam.
Surface mounting using built in heavy
duty bracket.
Cover
Lamp holder
Tempered protective toughened front
glass with thermal shock resistance and
impactresistance,fixedwith2nos.SS
screws for in-position lamp replacement.
In ceramics with electrical grade brass
contacts.
•Signboards
•Securityareas
•Airportapprons
•Highmasttowers
•Constructionsites
•Sportscomplex
Finish
Epoxy grey powder coated after
phosphochromate treatment.
90
Electric gear
Pre-wired with power factor improvement
capacitor and super imposed ignitor
for reliable ignition upto terminal block,
copper wound ferromagnetic ballast
supplied separately to be wired as per
instruction.
Applications
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
LHFY37125C99
LHGMCJENEAC1250
1x250W SON/
MH SET
240
1.320
E 40
>0.85
33 mfd
LHFY37140C99
LHGMCKENEAE1400
1x400W SON/
MH SET
240
2.200
E 40
>0.85
42 mfd
Technical Drawing
141±2
302.5±2
414±2
IP-66
Top View
512±3
• 250W SV/MH
• 400W SV/MH
Front View
All dimensions are in mm
91
Jeta 6 New
Integral wide beam long throw flood light luminaire suitable for single tubular 250W/ 400W
HighPressureSodiumVapour/MetalHalidelamp.
Product Specifications
Housing
Optics
Mounting
Pressure die-cast aluminium alloy LM24
with IP65 protection.
Reflectors made of high purity preanodised dimpled aluminium sheet for
wide beam. Available in Assymmetric
version.
Surface mounting using built in heavy
duty bracket.
Cover
Tempered protective toughened black
colour front glass, 5mm thick, thermal
shockandimpactresistant,fixedwith
quick release hinge-clips for in-position
lamp replacement.
Finish
Epoxy white powder coated after
phosphochromate treatment.
92
Lamp holder
In ceramics with electrical grade brass
contacts.
Electric gear
Pre-wired with power factor improvement
capacitor and super imposed ignitor
for reliable ignition upto terminal block,
copper wound ferromagnetic ballast
supplied separately to be wired as per
instruction.
Applications
•Signboards
•Securityareas
•Airportapprons
•Highmasttowers
•Constructionsites
•Sportscomplex
Technical Data
Ordering
Code
LHFY39140C99
LHGMCKENEAE1400
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
1x400W SON/
MH SET
240
2.200
E 40
>0.85
42 mfd
Technical Drawing
149±2
486±2
423±2
402±2
Front View
100
Top View
All dimensions are in mm
93
Ranger 1 New NI
Non Integral wide beam long throw flood light luminaire suitable for single tubular High
PressureSV/MHlampupto400W.
Product Specifications
Housing
Optics
Applications
Pressure die-cast aluminium alloy LM24
with IP65 protection.
Reflectors made of high purity dimpled/
peened pre-anodised specular
aluminium sheet.
•Arealighting
•Highmasttowers
•Marshellingyards
•Switchyardstations
•Monuments&facadelighting
•Sportscomplex
Cover
Tempered protective toughened front
glass, 5mm thick, thermal shock and
impact resistant. Fixed to the frame by
silicon sealant & to the housing by 2 nos.
SS toggles.
Finish
Epoxy grey powder coated after
phosphochromate treatment.
94
Lamp holder
In ceramics with electrical grade brass
contacts.
Electric gear*
Select appropriate control gear as per
selected lamp source & wattage.
Mounting
Surface mounting using provided bracket
with locking holes.5mm with holes of Ø
13mm at PCD of 49mm.
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
LHFY46140099
1x400W SON/ MH SET
240
2.200
E 40
*To be used with appropriate rating CG box.
Technical Drawing
152±2
370±2
258±2
225±2
395±2
Side View
152
Top View
All dimensions are in mm
95
Jeta Axial
Symmetric Non-integral flood light luminaire suitable upto1x400W tubular High Pressure
SodiumVapourorMetalHalidelamp.
Product Specifications
Housing
Optics
Applications
Die-cast aluminium alloy LM6 provided
with handle for ease of handling. Flynut
arrangement is provided in housing for
lamp replacement.
Reflector made up of spun aluminium,
electrochemically brightened & anodised.
•Stadiums
•Storageyards
•Securityareas
•Highmasttowers
•Monuments&facadelighting
•Nevypier/Jetty/Airportaprons
Cover
Tempered and toughened protective
front glass, 5mm thick, thermal shock
& impact resistant (IK08). Fixed to the
housing with silicon glue & 4 nos. SS
toggles.
Finish
Epoxy grey powder coated after
phosphochromate treatment.
96
Lamp holder
In ceramics with electrical grade brass
contacts.
Electric gear*
Select appropriate control gear as per
selected lamp source & wattage.
Mounting
Wall/surface mounting using the
adjustable mounting bracket of thickness
5mm with holes of Ø 13mm at PCD of
49mm.
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
LHFY04240099
upto 400W SON/ MH SET
240
2.200
E 40
*To be used with appropriate rating CG box.
Technical Drawing
433
177
446
715
Ø537
256
98
Back View
372
1/4”x52mm Fly Nut
Side View
All dimensions are in mm
Tolerance ± 2mm
97
Ranger 2 NI
Non Integral wide beam long throw flood light luminaire suitable for twin tubular High
PressureSV/MHlampsupto400W.
Product Specifications
Housing
Optics
Applications
Die-cast aluminium alloy LM6 with IP65
protection.
Reflectors made of high purity dimpled/
peened center reflector & pre-anodised
specular side reflectors.
•Arealighting
•Highmasttowers
•Marshellingyards
•Switchyardstations
•Monuments&facadelighting
•Sportscomplex
Cover
Tempered protective toughened front
glass, 5mm thick, thermal shock and
impact resistant. Sealed from front side
with silicon sealant & held to the housing
by 4 nos. SS toggles.
Finish
Epoxy grey powder coated after
phosphochromate treatment.
98
Lamp holder
In ceramics with electrical grade brass
contacts.
Electric gear*
Select appropriate control gear as per
selected lamp source & wattage.
Mounting
Surface mounting using built in heavy
duty bracket with locking holes.
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
LHFY05240099
2x400W SON/ MH SET
240
4.400
E 40
*To be used with appropriate rating CG box.
Technical Drawing
730±2
345±2
200±2
155±2
102
Top View
Front View
All dimensions are in mm
99
Ranger 2 Oval NI
Non Integral wide beam long throw flood light luminaire suitable for twin tubular High
PressureSV/MHlampupto400W.
Product Specifications
Housing
Finish
Mounting
Pressure die-cast aluminium housing
(LM24)forefficientthermalmanagement,
sturdiness & excellent corrosion
resistant. PG11 cable gland provided for
maintaing ingress protection.
Epoxy grey powder coated after
phosphochromate treatment.
Surface mounting using adjustable
bracket with locking holes.
Optics
Applications
Reflectors made of high purity preanodised specular aluminium sheet.
•Arealighting
•Highmasttowers
•Marshellingyards
•Switchyardstations
•Monuments&facadelighting
•Sportscomplex
Cover
Tempered protective toughened front
glass, 5mm thick, thermal shock and
impact resistant. Fixed to the frame by
silicon gasket & to the housing by 6 nos.
SS toggles.
100
Lamp holder
In ceramics with electrical grade brass
contacts.
Electric gear*
Select appropriate control gear as per
selected lamp source & wattage.
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
LHFY06240099
2x400W SON/ MH SET
240
4.400
E 40
* To be used with appropriate rating CG box.
358±2
Technical Drawing
314±2
19
727±2
Top View
3 Holes Ø12.5 mm
164±2
Front View
All dimensions are in mm
101
Beam
Exclusively designed narrow beam ultra compact integral flood light suitable for single MH
SEQ/CMI-T lamp upto 150W.
Product Specifications
Housing
Pressure Die-cast aluminium alloy LM24
in IP65 protection.
Cover
Tempered protective toughened front
glass, 5mm thick, thermal shock and
impact resistant.
Finish
Epoxy grey powder coated after
phosphochromate treatment.
Optics
Reflector made of deep drawn, virgin
polished and anodized aluminium
facetted sheet. Optics is designed for
specificapplicationtoachievevery
102
narrow beam pattern varying from 5 to
10 degrees.
flexible/adjustable arrangement to rotate/
aiming light in desired direction.
Lamp holder
Applications
White PBT housing with brass contacts
and SS clips.
•Tallstructures
•Accentlighting
•Distantspotlights
•Architecturalfacades
•Bordersecurityareas
Electric gear
Wired with flexible silicon wire using
copper wound ferromagnetic ballast,
power factor improvement capacitor and
super imposed ignitor for reliable ignition
upto terminal block.
Mounting
Wall/surface mounting using 2 nos.
fasteners. Optical housing attached with
Technical Data
Ordering
Code
Lamp
Type
Nominal
Voltage (V)
Mains
Current (A)
Lamp
Socket
Power
Factor
Capacitor
Value
LHFM16170C99
LHBW07170036
1x70W MHSEQ/CMI-T
240
0.400
G 12
>0.85
10 mfd
LHFM16115C99
LHBW20115036
1x150W MHSEQ/CMI-T
240
0.820
G 12
>0.85
20 mfd
Technical Drawing
295
385±2
215±2
Top View
Front View
Ø205
Side View
All dimensions are in mm
103
Brighten your World
with Havells LED
We are now in
SOLAR street light.
Havells – Lighting up the way
Solar Street light system
A LED based solar street lighting system
consists of a PV Module, control electronics,
battery, and LED based luminaries, all suitably
mounted on a pole. The battery is charged by
electricity generated through the PV module
during day time and the luminaries provides
light from dusk to dawn.
Havells India Limited is a USD 1.4 billion Indian multinational company. Havells is also the 4th
largest lighting company of the world. The company owns a large product portfolio in consumer
and professional lighting, and caters to indoor, outdoor and specialty lighting segments.
Applications
Havells’ strength is its manufacturing capability. Havells is the only company in India that
• Street Lighting
manufactures its entire lighting product portfolio in-house. The company has established a state-
• Perimeter Security Lighting
of-the-art, technologically advanced manufacturing plant at Neemrana, Rajasthan to manufacture
• Park Lighting
luminaires and fixtures. The ultra-modern manufacturing plant is a replica of Havells manufacturing
• Campus Lighting
in France, and contains sophisticated processes like robotic box bending machines. Supported
• Pathway Lighting
by German, Italian and Japanese technology, the colossal manufacturing unit is spread over 2
• Remote Area Lighting
lakh square feet, and churns out 5 million CFLs every month.
• Farm Lighting
Havells lighting business is strongly supported by its dealership network of over 20,000 across
• Ship Dock Lighting
the world. In 2007, the company made history by acquiring the legacy European lighting brand
• Railway Yard Lighting
‘Sylvania’. The acquisition strengthened Havells lighting in the global markets.
Why Havells Solar
LED Luminaire
Havells LED Luminaries delivers the best in class lumen efficacy. They deliver the maximum light
output (lumens) at the lower wattage .
About MPPT
Havells LED street lighting systems are designed with MPPT (Maximum Power Point Tracking)
which provides about 25% more efficiency by utilizing maximum energy harvested by solar PV
modules.
About Solar PV module
Highly efficient poly crystalline solar modules are used which are tested for longer durability &
manufactured with innovative technologies. These modules are designed to withstand highly
corrosive atmospheres and heavy wind loads. Also the modules are certified for industry
standards IEC61215,IEC61730( safety class 1 & 11), IEC61701 and CE.
Benefits of solar LED street lights
1. Fully Renewable and Independent Energy source.
2. Zero Carbon foot prints.
3. Easy to Install. Instant installation and ready to use.
4. No External cabling,Trenching required i.e eliminates the chance of accident due to electric
shocks, No trenching & wiring.
5. Ideal solution for Rural and remote areas where power lines are not available.
6. Independent of Grid , the operational costs are minimum.
7. Green technology.
8. No maintenance in initial years
9. Immediate Returns on Investment.
Product Offerings.
1. Standard systems ( this is offered with Preset specification with various wattages to suit,
Specs of Govt., private and PSU’s)
2. Customized solutions can be offered with one to one meeting with end user.
3. Hybrid system which would operate on AC ( alternate current, i.e in presence of GRID supply
and DC ( Direct current in ABSENCE of grid supply) it would work in Either Circumstances.
Industrial Lighting & Arae Lighting Catalogue 2015
Pole Diagram for SOLAR street light:
Only Tier 1 make poly crystalline silicon
solar panels with high efficiency & long
lifetime area used.
LED
High Lumen LED modules for maximum efficacy
with lifetime > 50,000 hrs & CRI nominal 70.
Pressure Die cast Aluminium IP66 enclosure
of excellent water-proofing & humidity barrier.
barrier
offer
Controller
Highly effecient controller to charge your
batteries & microcontroler controlled
algorithms for light management to
ensure maximum uptime. Microcontroller
managed algorithms autonomously determine
sunrise & sunset.
Professional Luminaires
Lighting Solutions
Specific deep discharge batteries are used
tto store the energy, provide energy for
immediate requirements, and enable a backup for days when there is little or no sun.
REGIONAL & BRANCH OFFICES:
NORTH - REGIONAL OFFICE: Corporate Office: QRG Towers, 2D, Sector-126, Expressway, Noida-201304, Tel: 0120-3331000, Delhi: Tel: 011-47676700,
23888200, Chandigarh: Tel: 0172-4232400-401, Dehradun: Tel: 0135-6670202, Noida / Haryana: Tel: 0120-3331000, Ludhiana: Tel: 0161-4676000 / 24,
Jammu: Tel: 0191-2478330, 2479330, Sri Nagar: Tel: 0194-2490431, Jaipur: Tel: 0141-3914645, 3988210 Jodhpur: Tel: 0291-9214201640 / 45,
Lucknow: Tel: 0522-6672100, Kanpur: Tel: 0512-6710400, 6710409
EAST - REGIONAL OFFICE: Kolkata: ICC Tower, 5th Floor, 4 India Exchange Place, Kolkata-700001, Tel: 033-40129851 / 52, Bhubaneshwar: Tel: 06746668101/102/103/104, Guwahati: Tel: 0361-2134521, 2458923, 2460355, Siliguri: Tel: 0353-2525907, Ranchi: 0651-2244861, 2244862, 2244864, 2244868,
2244869, Jamshedpur: Tel: 0657-6542492, 09234369436, Patna: Tel: 0612-2207221, 2207222, 2207223, 2655518
SOUTH - REGIONAL OFFICE: Chennai: Sigapi Achi Building, No. 18 / 3, 6th Floor, Rukmani Lakshmipathy Road, Egmore, Chennai-600008, Tel: 044-42280600, 605,
Bangalore: Tel: 080-49075000, Coimbatore: Tel: 0422-2305767, 2306199, 2305199, Hyderabad: Tel: 040-27533372, 27533355, 27533632,
66320407/0408/6401/6402, Kochi: Tel: 0484-4099000, Vishakapatnam: Tel: 0891-6514339, Vizag: Tel: 0891-6514339, Vijayawada: Tel: 91+9247058847/57,
Calicut: 4954019194, Madurai: 09994493242, Trivandrum: 4714015323, Hubli: 09448146028, Trichy: 09944460160
Representative Offices: • Goa • Solapur • Gwalior • Kathmandu • Bhopal
Although every effort has been made to ensure accuracy in the compilation of the technical detail within this publication,
however current details should therefore be checked with Havells Group. Specifications & performance data are constantly changing.
Havells India Ltd.
QRG Towers, 2D, Sector -126, Expressway, Noida - 201 304 (UP), Ph. +91-120-3331000,
E-mail: marketing@havells.com, www.havells.com
Consumer Care No.: 1800 11 0303, 1800 103 1313 (All Connections), 011-4166 0303 (Landline)
Join us on Facebook at www.facebook.com/havells and share your ways to save the planet!
CIN - L31900DL1983PLC016304.
LP/ZHLRC00017//MAR15/OCT15
WEST - REGIONAL OFFICE: Mumbai: 301, Everest House, 3rd Floor, 6, Suren Road, Chakala, Andheri (E). Mumbai - 400 093, Tel: 022-67298600-602,
Ahmedabad: Tel: 079-40061111, 40060738-740, Indore: Tel: 0731-2572340-41, 4009998 (Airtel), Rajkot: Tel: 0281-2481112, 2921212,
Nagpur: Tel: 0712-2240932, 2242692, 2242699 Pune: Tel: 020-64016413 / 14, Raipur: Tel: 0771-4243400 / 01, Surat: Tel: 0261-2350137, 9979890137,
Jabalpur: Tel: 0761-4064491
Industrial Lighting & Area Lighting Catalogue 2015