Cree® XLamp® XP-L LEDs
XP-L High Density LED
XP-L High Intensity LED
Product Description
FEATURES
Table of Contents
XLamp® XP-L LEDs are available in two
• Available in white, 70-CRI white, 80‑CRI
Characteristics.............................................2
versions: High Density and High Intensity.
white, 85 CRI white and 90‑CRI white
Flux Characteristics - XP-L High Density....3
• ANSI‑compatible chromaticity bins
The XLamp
XP-L High Density (HD)
Flux Characteristics - XP-L High Intensity..8
• Binned at 85 °C
Relative Spectral Power Distribution....... 12
LED is the highest performing discrete in
• Maximum drive current: 3000 mA
Relative Flux vs. Junction Temperature... 12
Cree’s High Density (HD) class of LEDs,
• Low thermal resistance: 2.2 °C/W
Electrical Characteristics.......................... 13
delivering the next generation of lumen
• Wide viewing angle: 125° (XP-L High
Relative Flux vs. Current........................... 13
®
output and efficacy in the compact
3.45 mm x 3.45 mm XP footprint.
Cree’s HD LEDs, optimized to deliver
CLD-DS97 Rev 4D
Product family data sheet
Density), 115° (XP-L High Intensity)
• Unlimited floor life at
≤ 30 ºC/85% RH
Relative Chromaticity vs. Current............. 14
Relative Chromaticity vs. Temperature.... 15
Typical Spatial Distribution....................... 16
maximum lumen output in a small form
• Reflow solderable - JEDEC J‑STD‑020C
Thermal Design......................................... 16
factor, enable lighting manufacturers
• Electrically neutral thermal path
Performance Groups – Luminous Flux... 17
to improve the performance of any
• RoHS and REACh compliant
Performance Groups – Chromaticity....... 18
lighting design, create smaller and less
• UL recognized component (E349212)
Cree’s Standard Chromaticity Regions
®
expensive systems, and develop new
Plotted on the 1931 CIE Curve................. 21
lighting solutions that were previously
Cree’s Standard Cool White Kits Plotted
not possible.
on ANSI Standard Chromaticity
www.cree.com/Xlamp
Regions...................................................... 23
The XLamp XP-L High Intensity (HI) LED
Cree’s Standard Warm and Neutral
is the first of Cree’s new class of High
White Kits Plotted on ANSI Standard
Intensity (HI) LEDs optimized to deliver
Chromaticity Regions............................... 24
maximum candela through secondary
Cree’s Standard Chromaticity Kits........... 26
optics. Built on Cree’s breakthrough SC5
Bin and Order Code Formats.................... 27
Technology™ Platform, the XP-L HI LED
Reflow Soldering Characteristics............. 28
delivers 120 percent more candela than
Notes......................................................... 29
the XP-L HD LED through the same optic.
Mechanical Dimensions........................... 31
The XP-L HI LED leverages the industry’s
Tape and Reel............................................ 33
highest single-die performance and a
Packaging.................................................. 35
new innovative primary optic design that
radically reduces the optical source size
to deliver both lumens and intensity.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp ® XP-L LED
Characteristics
Characteristics
Unit
Thermal resistance, junction to solder point
°C/W
2.2
Viewing angle (FWHM) - XP-L High Density
degrees
125
Viewing angle (FWHM) - XP-L High Intensity
degrees
115
mV/°C
-2
Temperature coefficient of voltage
ESD withstand voltage (HBM per Mil-Std-883D)
Minimum
Typical
Maximum
V
8000
mA
3000
Reverse voltage
V
-5
Forward voltage (@ 1050 mA, 85 °C)
V
LED junction temperature
°C
DC forward current
2.95
3.25
150
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® XP-L LED
Flux Characteristics - XP-L High Density (TJ = 85 °C)
The following table provides order codes for XLamp XP-L High Density LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 27). For definitions of the chromaticity kits, please see the Cree’s Standard
Chromaticity Kits section (page 26).
Chromaticity
Kit
51
53
50
E1
E2
CCT
6200 K
6000 K
6200 K
6500 K
5700 K
Minimum Luminous Flux (lm)
@ 1050 mA
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
Order Codes
65 CRI Typical
70 CRI Minimum
V6
480
535
XPLAWT-00-0000-0000V6051
XPLAWT-00-0000-000BV6051
V5
460
513
XPLAWT-00-0000-0000V5051
XPLAWT-00-0000-000BV5051
V4
440
491
XPLAWT-00-0000-0000V4051
XPLAWT-00-0000-000BV4051
V3
420
468
XPLAWT-00-0000-0000V3051
XPLAWT-00-0000-000BV3051
V2
400
446
V6
480
535
XPLAWT-00-0000-0000V6053
XPLAWT-00-0000-000BV6053
XPLAWT-00-0000-000BV2051
V5
460
513
XPLAWT-00-0000-0000V5053
XPLAWT-00-0000-000BV5053
V4
440
491
XPLAWT-00-0000-0000V4053
XPLAWT-00-0000-000BV4053
V3
420
468
XPLAWT-00-0000-0000V3053
XPLAWT-00-0000-000BV3053
V2
400
446
XPLAWT-00-0000-000BV2053
V6
480
535
XPLAWT-00-0000-0000V6050
XPLAWT-00-0000-000BV6050
V5
460
513
XPLAWT-00-0000-0000V5050
XPLAWT-00-0000-000BV5050
V4
440
491
XPLAWT-00-0000-0000V4050
XPLAWT-00-0000-000BV4050
XPLAWT-00-0000-0000V3050
V3
420
468
V2
400
446
XPLAWT-00-0000-000BV3050
V6
480
535
XPLAWT-00-0000-0000V60E1
XPLAWT-00-0000-000BV60E1
V5
460
513
XPLAWT-00-0000-0000V50E1
XPLAWT-00-0000-000BV50E1
V4
440
491
XPLAWT-00-0000-0000V40E1
XPLAWT-00-0000-000BV40E1
V3
420
468
XPLAWT-00-0000-0000V30E1
XPLAWT-00-0000-000BV30E1
V2
400
446
XPLAWT-00-0000-000BV2050
XPLAWT-00-0000-000BV20E1
V6
480
535
XPLAWT-00-0000-0000V60E2
XPLAWT-00-0000-000BV60E2
V5
460
513
XPLAWT-00-0000-0000V50E2
XPLAWT-00-0000-000BV50E2
V4
440
491
XPLAWT-00-0000-0000V40E2
XPLAWT-00-0000-000BV40E2
V3
420
468
XPLAWT-00-0000-000BV30E2
V2
400
446
XPLAWT-00-0000-000BV20E2
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® XP-L LED
Flux Characteristics - XP-L High Density (TJ = 85 °C) - Continued
Chromaticity
Kit
E3
F4
E4
F5
E5
Z5
CCT
5000 K
4750 K
4500 K
4250 K
4000 K
4000 K
Minimum Luminous Flux (lm)
@ 1050 mA
Order Codes
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
70 CRI Minimum
V6
480
535
XPLAWT-00-0000-000BV60E3
75 CRI Typical
V5
460
513
XPLAWT-00-0000-000BV50E3
XPLAWT-00-0000-000LV50E3
V4
440
491
XPLAWT-00-0000-000BV40E3
XPLAWT-00-0000-000LV40E3
V3
420
468
XPLAWT-00-0000-000BV30E3
XPLAWT-00-0000-000LV30E3
XPLAWT-00-0000-000LV20E3
V2
400
446
XPLAWT-00-0000-000BV20E3
V6
480
535
XPLAWT-00-0000-000BV60F4
V5
460
513
XPLAWT-00-0000-000BV50F4
XPLAWT-00-0000-000LV50F4
V4
440
491
XPLAWT-00-0000-000BV40F4
XPLAWT-00-0000-000LV40F4
V3
420
468
XPLAWT-00-0000-000BV30F4
XPLAWT-00-0000-000LV30F4
XPLAWT-00-0000-000LV20F4
V2
400
446
XPLAWT-00-0000-000BV20F4
V6
480
535
XPLAWT-00-0000-000BV60E4
V5
460
513
XPLAWT-00-0000-000BV50E4
XPLAWT-00-0000-000LV50E4
V4
440
491
XPLAWT-00-0000-000BV40E4
XPLAWT-00-0000-000LV40E4
V3
420
468
XPLAWT-00-0000-000BV30E4
XPLAWT-00-0000-000LV30E4
XPLAWT-00-0000-000LV20E4
V2
400
446
XPLAWT-00-0000-000BV20E4
V6
480
535
XPLAWT-00-0000-000BV60F5
V5
460
513
XPLAWT-00-0000-000BV50F5
XPLAWT-00-0000-000LV50F5
V4
440
491
XPLAWT-00-0000-000BV40F5
XPLAWT-00-0000-000LV40F5
V3
420
468
XPLAWT-00-0000-000BV30F5
XPLAWT-00-0000-000LV30F5
V2
400
446
XPLAWT-00-0000-000BV20F5
XPLAWT-00-0000-000LV20F5
V6
480
535
XPLAWT-00-0000-000BV60E5
V5
460
513
XPLAWT-00-0000-000BV50E5
V4
440
491
XPLAWT-00-0000-000BV40E5
80 CRI Minimum
XPLAWT-00-0000-000LV40E5
XPLAWT-00-0000-000HV40E5
V3
420
468
XPLAWT-00-0000-000BV30E5
XPLAWT-00-0000-000LV30E5
XPLAWT-00-0000-000HV30E5
V2
400
446
XPLAWT-00-0000-000BV20E5
XPLAWT-00-0000-000LV20E5
XPLAWT-00-0000-000HV20E5
XPLAWT-00-0000-000BU60E5
XPLAWT-00-0000-000LU60E5
U6
380
424
U5
360
401
XPLAWT-00-0000-000HU60E5
XPLAWT-00-0000-000HU50E5
V4
440
491
XPLAWT-00-0000-000BV40Z5
XPLAWT-00-0000-000LV40Z5
XPLAWT-00-0000-000HV40Z5
V3
420
468
XPLAWT-00-0000-000BV30Z5
XPLAWT-00-0000-000LV30Z5
XPLAWT-00-0000-000HV30Z5
V2
400
446
XPLAWT-00-0000-000BV20Z5
XPLAWT-00-0000-000LV20Z5
XPLAWT-00-0000-000HV20Z5
XPLAWT-00-0000-000BU60Z5
XPLAWT-00-0000-000LU60Z5
U6
380
424
U5
360
401
XPLAWT-00-0000-000HU60Z5
XPLAWT-00-0000-000HU50Z5
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® XP-L LED
Flux Characteristics - XP-L High Density (TJ = 85 °C) - Continued
Chromaticity
Kit
F6
Chromaticity
Kit
E6
Z6
F7
CCT
CCT
3700 K
Minimum Luminous Flux (lm)
@ 1050 mA
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
V4
440
491
V3
420
468
XPLAWT-00-0000-000LV30F6
V2
400
446
XPLAWT-00-0000-000LV20F6
XPLAWT-00-0000-000HV20F6
U6
380
424
XPLAWT-00-0000-000LU60F6
XPLAWT-00-0000-000HU60F6
U5
360
401
XPLAWT-00-0000-000LU50F6
XPLAWT-00-0000-000HU50F6
70 CRI Minimum
75 CRI Typical
XPLAWT-00-0000-000HV30F6
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
80 CRI Typical
80 CRI Minimum
V3
420
468
XPLAWT-00-0000000LV30E6
XPLAWT-00-0000000HV30E6
V2
400
446
XPLAWT-00-0000000LV20E6
XPLAWT-00-0000000HV20E6
U6
380
424
XPLAWT-00-0000000LU60E6
XPLAWT-00-0000000HU60E6
U5
360
401
XPLAWT-00-0000000LU50E6
XPLAWT-00-0000000HU50E6
V2
400
446
XPLAWT-00-0000000LV20Z6
XPLAWT-00-0000000HV20Z6
U6
380
424
XPLAWT-00-0000000LU60Z6
XPLAWT-00-0000000HU60Z6
U5
360
401
XPLAWT-00-0000000LU50Z6
XPLAWT-00-0000000HU50Z6
V2
400
446
XPLAWT-00-0000000LV20F7
XPLAWT-00-0000000HV20F7
U6
380
424
XPLAWT-00-0000000LU60F7
XPLAWT-00-0000000HU60F7
U5
360
401
XPLAWT-00-0000000LU50F7
XPLAWT-00-0000000HU50F7
U4
340
379
XPLAWT-00-0000000LU40F7
XPLAWT-00-0000000HU40F7
3250 K
80 CRI Minimum
XPLAWT-00-0000-000HV40F6
Minimum Luminous
Flux (lm) @ 1050 mA
3500 K
3500 K
Order Codes
85 CRI Minimum
90 CRI Minimum
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® XP-L LED
Flux Characteristics - XP-L High Density (TJ = 85 °C) - Continued
Chromaticity
Kit
E7
Z7
F8
CCT
3000 K
Minimum Luminous
Flux (lm) @ 1050 mA
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
80 CRI Typical
80 CRI Minimum
V2
400
446
XPLAWT-00-0000000LV20E7
XPLAWT-00-0000000HV20E7
U6
380
424
XPLAWT-00-0000000LU60E7
XPLAWT-00-0000000HU60E7
U5
360
401
XPLAWT-00-0000000LU50E7
XPLAWT-00-0000000HU50E7
U4
340
379
XPLAWT-00-0000000LU40E7
XPLAWT-00-0000000HU40E7
U3
320
U2
85 CRI Minimum
90 CRI Minimum
357
XPLAWT-00-0000000PU30E7
XPLAWT-00-0000000UU30E7
300
334
XPLAWT-00-0000000PU20E7
XPLAWT-00-0000000UU20E7
T6
280
312
XPLAWT-00-0000000PT60E7
XPLAWT-00-0000000UT60E7
U6
380
424
XPLAWT-00-0000000LU60Z7
XPLAWT-00-0000000HU60Z7
U5
360
401
XPLAWT-00-0000000LU50Z7
XPLAWT-00-0000000HU50Z7
U4
340
379
XPLAWT-00-0000000LU40Z7
XPLAWT-00-0000000HU40Z7
U3
320
357
XPLAWT-00-0000000PU30Z7
XPLAWT-00-0000000UU30Z7
U2
300
334
XPLAWT-00-0000000PU20Z7
XPLAWT-00-0000000UU20Z7
T6
280
312
XPLAWT-00-0000000PT60Z7
XPLAWT-00-0000000UT60Z7
V2
400
446
XPLAWT-00-0000000LV20F8
U6
380
424
XPLAWT-00-0000000LU60F8
XPLAWT-00-0000000HU60F8
U5
360
401
XPLAWT-00-0000000LU50F8
XPLAWT-00-0000000HU50F8
U4
340
379
XPLAWT-00-0000000LU40F8
XPLAWT-00-0000000HU40F8
U3
320
357
XPLAWT-00-0000000PU30F8
XPLAWT-00-0000000UU30F8
U2
300
334
XPLAWT-00-0000000PU20F8
XPLAWT-00-0000000UU20F8
T6
280
312
XPLAWT-00-0000000PT60F8
XPLAWT-00-0000000UT60F8
T5
260
290
XPLAWT-00-0000000PT50F8
XPLAWT-00-0000000UT50F8
3000 K
2850 K
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® XP-L LED
Flux Characteristics - XP-L High Density (TJ = 85 °C) - Continued
Chromaticity
Kit
E8
Z8
CCT
Minimum Luminous
Flux (lm) @ 1050 mA
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
80 CRI Typical
V2
400
446
XPLAWT-00-0000000LV20E8
U6
380
424
XPLAWT-00-0000000LU60E8
XPLAWT-00-0000000HU60E8
U5
360
401
XPLAWT-00-0000000LU50E8
XPLAWT-00-0000000HU50E8
U4
340
379
XPLAWT-00-0000000LU40E8
XPLAWT-00-0000000HU40E8
U3
320
U2
85 CRI Minimum
90 CRI Minimum
357
XPLAWT-00-0000000PU30E8
XPLAWT-00-0000000UU30E8
300
334
XPLAWT-00-0000000PU20E8
XPLAWT-00-0000000UU20E8
T6
280
312
XPLAWT-00-0000000PT60E8
XPLAWT-00-0000000UT60E8
T5
260
290
XPLAWT-00-0000000PT50E8
XPLAWT-00-0000000UT50E8
U6
380
424
XPLAWT-00-0000000LU60Z8
U5
360
401
XPLAWT-00-0000000LU50Z8
XPLAWT-00-0000000HU50Z8
U4
340
379
XPLAWT-00-0000000LU40Z8
XPLAWT-00-0000000HU40Z8
U3
320
357
U2
300
334
XPLAWT-00-0000000PU20Z8
XPLAWT-00-0000000UU20Z8
T6
280
312
XPLAWT-00-0000000PT60Z8
XPLAWT-00-0000000UT60Z8
T5
260
290
XPLAWT-00-0000000PT50Z8
XPLAWT-00-0000000UT50Z8
2700 K
2700 K
Order Codes
80 CRI Minimum
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® XP-L LED
Flux Characteristics - XP-L High Intensity (TJ = 85 °C)
The following table provides order codes for XLamp XP-L High Intensity LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 27). For definitions of the chromaticity kits, please see the Cree’s Standard
Chromaticity Kits section (page 26).
Chromaticity
Minimum Luminous Flux (lm)
@ 1050 mA
Order Codes
Kit
CCT
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
V2
400
446
XPLAWT-H0-0000-0000V2051
XPLAWT-H0-0000-000BV2051
51
6200 K
U6
380
424
XPLAWT-H0-0000-0000U6051
XPLAWT-H0-0000-000BU6051
53
50
E1
E2
6000 K
6200 K
6500 K
5700 K
65 CRI Typical
70 CRI Minimum
U5
360
401
XPLAWT-H0-0000-0000U5051
XPLAWT-H0-0000-000BU5051
V2
400
446
XPLAWT-H0-0000-0000V2053
XPLAWT-H0-0000-000BV2053
U6
380
424
XPLAWT-H0-0000-0000U6053
XPLAWT-H0-0000-000BU6053
U5
360
401
XPLAWT-H0-0000-0000U5053
XPLAWT-H0-0000-000BU5053
V2
400
446
XPLAWT-H0-0000-0000V2050
XPLAWT-H0-0000-000BV2050
U6
380
424
XPLAWT-H0-0000-0000U6050
XPLAWT-H0-0000-000BU6050
U5
360
401
XPLAWT-H0-0000-0000U5050
XPLAWT-H0-0000-000BU5050
V2
400
446
XPLAWT-H0-0000-0000V20E1
XPLAWT-H0-0000-000BV20E1
U6
380
424
XPLAWT-H0-0000-0000U60E1
XPLAWT-H0-0000-000BU60E1
U5
360
401
XPLAWT-H0-0000-0000U50E1
XPLAWT-H0-0000-000BU50E1
V2
400
446
XPLAWT-H0-0000-0000V20E2
XPLAWT-H0-0000-000BV20E2
U6
380
424
XPLAWT-H0-0000-0000U60E2
XPLAWT-H0-0000-000BU60E2
U5
360
401
XPLAWT-H0-0000-0000U50E2
XPLAWT-H0-0000-000BU50E2
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® XP-L LED
Flux Characteristics - XP-L High Intensity (TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux (lm) @
1050 mA
Kit
Code
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
70 CRI Minimum
75 CRI Typical
V2
400
446
XPLAWT-H0-0000-000BV20E3
XPLAWT-H0-0000-000LV20E3
E3
F4
E4
F5
E5
F6
CCT
5000 K
4750 K
4500 K
4250 K
4000 K
3700 K
Order Codes
U6
380
424
XPLAWT-H0-0000-000BU60E3
XPLAWT-H0-0000-000LU60E3
U5
360
401
XPLAWT-H0-0000-000BU50E3
XPLAWT-H0-0000-000LU50E3
V2
400
446
XPLAWT-H0-0000-000BV20F4
XPLAWT-H0-0000-000LV20F4
U6
380
424
XPLAWT-H0-0000-000BU60F4
XPLAWT-H0-0000-000LU60F4
U5
360
401
XPLAWT-H0-0000-000BU50F4
XPLAWT-H0-0000-000LU50F4
V2
400
446
XPLAWT-H0-0000-000BV20E4
XPLAWT-H0-0000-000LV20E4
U6
380
424
XPLAWT-H0-0000-000BU60E4
XPLAWT-H0-0000-000LU60E4
U5
360
401
XPLAWT-H0-0000-000BU50E4
XPLAWT-H0-0000-000LU50E4
V2
400
446
XPLAWT-H0-0000-000BV20F5
XPLAWT-H0-0000-000LV20F5
U6
380
424
XPLAWT-H0-0000-000BU60F5
XPLAWT-H0-0000-000LU60F5
U5
360
401
XPLAWT-H0-0000-000BU50F5
XPLAWT-H0-0000-000LU50F5
V2
400
446
XPLAWT-H0-0000-000BV20E5
XPLAWT-H0-0000-000LV20E5
U6
380
424
XPLAWT-H0-0000-000BU60E5
XPLAWT-H0-0000-000LU60E5
80 CRI Minimum
XPLAWT-H0-0000-000HU60E5
U5
360
401
XPLAWT-H0-0000-000BU50E5
XPLAWT-H0-0000-000LU50E5
XPLAWT-H0-0000-000HU50E5
U4
340
379
XPLAWT-H0-0000-000BU40E5
XPLAWT-H0-0000-000LU40E5
XPLAWT-H0-0000-000HU40E5
U5
360
401
XPLAWT-H0-0000-000LU50F6
XPLAWT-H0-0000-000HU50F6
U4
340
379
XPLAWT-H0-0000-000LU40F6
XPLAWT-H0-0000-000HU40F6
U3
320
357
XPLAWT-H0-0000-000LU30F6
XPLAWT-H0-0000-000HU30F6
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® XP-L LED
Flux Characteristics - XP-L High Intensity (TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux
(lm) @ 1050 mA
Kit
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
80 CRI Typical
80 CRI Minimum
U5
360
401
XPLAWT-H0-0000000LU50E6
XPLAWT-H0-0000000HU50E6
U4
340
379
XPLAWT-H0-0000000LU40E6
XPLAWT-H0-0000000HU40E6
U3
320
357
XPLAWT-H0-0000000LU30E6
XPLAWT-H0-0000000HU30E6
U4
340
379
XPLAWT-H0-0000000LU40F7
XPLAWT-H0-0000000HU40F7
U3
320
357
XPLAWT-H0-0000000LU30F7
XPLAWT-H0-0000000HU30F7
U2
300
334
XPLAWT-H0-0000000LU20F7
XPLAWT-H0-0000000HU20F7
U4
340
379
XPLAWT-H0-0000000LU40E7
XPLAWT-H0-0000000HU40E7
U3
320
357
XPLAWT-H0-0000000LU30E7
XPLAWT-H0-0000000HU30E7
U2
300
334
XPLAWT-H0-0000000LU20E7
XPLAWT-H0-0000000HU20E7
T6
280
T5
E6
F7
E7
F8
CCT
3500 K
3250 K
85 CRI Minimum
90 CRI Minimum
312
XPLAWT-H0-0000000PT60E7
XPLAWT-H0-0000000UT60E7
260
290
XPLAWT-H0-0000000PT50E7
XPLAWT-H0-0000000UT50E7
T4
240
268
XPLAWT-H0-0000000PT40E7
XPLAWT-H0-0000000UT40E7
U4
340
379
XPLAWT-H0-0000000LU40F8
XPLAWT-H0-0000000HU40F8
U3
320
357
XPLAWT-H0-0000000LU30F8
XPLAWT-H0-0000000HU30F8
U2
300
334
XPLAWT-H0-0000000LU20F8
XPLAWT-H0-0000000HU20F8
T6
280
312
XPLAWT-H0-0000000PT60F8
T5
260
290
XPLAWT-H0-0000000PT50F8
XPLAWT-H0-0000000UT50F8
T4
240
268
XPLAWT-H0-0000000PT40F8
XPLAWT-H0-0000000UT40F8
T3
220
245
XPLAWT-H0-0000000PT30F8
3000 K
2850 K
Order Codes
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® XP-L LED
Flux Characteristics - XP-L High Intensity (TJ = 85 °C) - Continued
Chromaticity
Minimum Luminous Flux
(lm) @ 1050 mA
Kit
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
80 CRI Typical
U4
340
379
XPLAWT-H0-0000000LU40E8
U3
320
357
XPLAWT-H0-0000000LU30E8
XPLAWT-H0-0000000HU30E8
U2
300
334
XPLAWT-H0-0000000LU20E8
XPLAWT-H0-0000000HU20E8
T6
280
312
XPLAWT-H0-0000000PT60E8
T5
260
290
XPLAWT-H0-0000000PT50E8
XPLAWT-H0-0000000UT50E8
T4
240
268
XPLAWT-H0-0000000PT40E8
XPLAWT-H0-0000000UT40E8
T3
220
245
XPLAWT-H0-0000000PT30E8
E8
CCT
2700 K
Order Codes
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
Notes
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 29).
• Cree XLamp XP-L LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than
the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specified by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® XP-L LED
Relative Spectral Power
Relative Spectral Power Distribution
Relative Radiant Power (%)
100
80
60
5000 K - 8300 K CCT
3700 K - 5000 K CCT
2600 K - 3700 K CCT
40
20
0
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative Flux Output vs. Junction Temperature
Relative Flux vs. Junction Temperature (IF = 1050 mA)
120
Relative Luminous Flux (%)
100
80
60
40
20
0
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® XP-L LED
Electrical Characteristics (Tj = 85°C)
Electrical Characteristics (TJ = 85 °C)
3000
Forward Current (mA)
2500
2000
1500
1000
500
0
2.6
2.8
3.0
3.2
3.4
Forward Voltage (V)
Relative Intensity vs. Current (Tj
= 85°C)
Relative Flux vs. Current (TJ = 85 °C)
Relative Luminous Flux (%)
250
200
150
100
50
0
0
500
1000
1500
2000
2500
3000
Forward Current (mA)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® XP-L LED
Relative Chromaticity Vs. Current, HD
Relative Chromaticity vs. Current (Warm White)
0.020
0.016
XP-L High Density
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0
500
1000
1500
2000
2500
3000
Current (mA)
Relative Chromaticity Vs. Current, HI
0.020
0.016
XP-L High Intensity
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0
500
1000
1500
2000
2500
3000
Current (mA)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® XP-L LED
Relative Chromaticity Vs. Temperature, HD
Relative Chromaticity vs. Temperature (Warm White)
0.020
0.016
XP-L High Density
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
Relative Chromaticity
Vs. Temperature,
HI
25
50
75
100
125
150
Tsp (°C)
0.020
0.016
XP-L High Intensity
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
25
50
75
100
125
150
Tsp (°C)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp ® XP-L LED
Typical Spatial Radiation Pattern
Typical Spatial Distribution
Relative Luminous Intensity (%)
100
80
60
XP-L High Density
XP-L High Intensity
40
20
-90
-70
-50
-30
-10
0
10
30
50
70
90
Angle (º)
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
Thermal
Design
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
Cool White
and optical characteristics.
3500
Maximum Current (mA)
3000
2500
2000
1500
Rj-a = 4°C/W
1000
Rj-a = 7°C/W
Rj-a = 10°C/W
500
Rj-a = 15°C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp ® XP-L LED
Performance Groups – Luminous Flux
XLamp XP-L LEDs are tested for luminous flux and placed into one of the following luminous‑flux groups:
Group Code
Minimum Luminous Flux
(lm) @ 1050 mA
Maximum Luminous Flux
(lm) @ 1050 mA
T3
220
240
T4
240
260
T5
260
280
T6
280
300
U2
300
320
U3
320
340
U4
340
360
U5
360
380
U6
380
400
V2
400
420
V3
420
440
V4
440
460
V5
460
480
V6
480
500
W2
500
520
W3
520
540
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp ® XP-L LED
Performance Groups – Chromaticity
Region
0A
0R
1A
1R
2A
2R
3A
4A
4R
x
y
0.2950
0.2970
0.2920
0.3060
0.2984
0.3133
0.3009
Region
x
y
0.2920
0.3060
x
y
0.2984
0.3133
x
y
0.2984
0.3133
0.2895
0.3135
0.2962
0.3220
0.3048
0.3207
0.2962
0.3220
0.3028
0.3304
0.3068
0.3113
0.3042
0.2984
0.3133
0.3048
0.3207
0.3009
0.3042
0.2980
0.2880
0.2895
0.3135
0.2962
0.3220
0.3037
0.2937
0.2950
0.2970
0.2870
0.3210
0.2937
0.3312
0.3009
0.3042
0.3009
0.3042
0.2937
0.3312
0.3005
0.3415
0.3068
0.3113
0.3037
0.2937
0.2962
0.3220
0.3028
0.3304
0.3093
0.2993
0.3048
0.3207
0.3028
0.3304
0.3115
0.3391
0.3130
0.3290
0.3130
0.3290
0.3115
0.3391
0.3205
0.3481
0.3213
0.3373
0.3144
0.3186
0.3130
0.3290
0.3213
0.3373
0.3221
0.3261
0.3068
0.3113
0.3048
0.3207
0.3130
0.3290
0.3144
0.3186
0.3068
0.3113
0.3005
0.3415
0.3099
0.3509
0.3144
0.3186
0.3144
0.3186
0.3099
0.3509
0.3196
0.3602
0.3221
0.3261
0.3161
0.3059
0.3115
0.3391
0.3205
0.3481
0.3231
0.3120
0.3093
0.2993
0.3028
0.3304
0.3115
0.3391
0.3161
0.3059
0.3215
0.3350
0.3207
0.3462
0.3290
0.3538
0.3290
0.3417
0.3290
0.3417
0.3290
0.3538
0.3376
0.3616
0.3371
0.3490
0.3290
0.3300
0.3290
0.3417
0.3371
0.3490
0.3366
0.3369
0.3222
0.3243
0.3215
0.3350
0.3290
0.3417
0.3290
0.3300
0.3222
0.3243
0.3196
0.3602
0.3290
0.3690
0.3290
0.3300
0.3290
0.3300
0.3290
0.3690
0.3381
0.3762
0.3366
0.3369
0.3290
0.3180
0.3290
0.3538
0.3376
0.3616
0.3361
0.3245
0.3231
0.3120
0.3207
0.3462
0.3290
0.3538
0.3290
0.3180
0.3371
0.3490
0.3376
0.3616
0.3366
0.3369
0.3381
0.3762
0.3451
0.3554
0.3463
0.3687
0.3440
0.3428
0.3480
0.3840
0.3440
0.3427
0.3451
0.3554
0.3429
0.3307
0.3463
0.3687
0.3366
0.3369
0.3371
0.3490
0.3361
0.3245
0.3376
0.3616
0.3530
0.3597
0.3548
0.3736
0.3641
0.3804
0.3615
0.3659
0.3615
0.3659
0.3641
0.3804
0.3736
0.3874
0.3702
0.3722
0.3590
0.3521
0.3615
0.3659
0.3702
0.3722
0.3670
0.3578
0.3512
0.3465
0.3530
0.3597
0.3615
0.3659
0.3590
0.3521
0.3512
0.3465
0.3571
0.3907
0.3668
0.3957
0.3590
0.3521
0.3590
0.3521
0.3668
0.3957
0.3771
0.4034
0.3670
0.3578
0.3567
0.3389
0.3641
0.3804
0.3736
0.3874
0.3640
0.3440
0.3495
0.3339
0.3548
0.3736
0.3641
0.3804
0.3567
0.3389
0B
0S
1B
1S
2B
2S
3B
4B
4S
Region
0C
0T
1C
1T
2C
2T
3R
4C
4T
Region
0D
0U
1D
1U
2D
2U
3S
4D
4U
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp ® XP-L LED
Performance Groups – Chromaticity (continued)
Region
5A1
5B1
5C1
5D1
6A1
6B1
6C1
6D1
7A1
x
y
0.3670
0.3578
0.3686
0.3649
0.3744
0.3685
0.3726
Region
x
y
0.3686
0.3649
x
y
x
y
0.3744
0.3685
0.3726
0.3612
0.3702
0.3722
0.3763
0.3760
0.3744
0.3685
0.3763
0.3760
0.3825
0.3798
0.3804
0.3721
0.3612
0.3744
0.3685
0.3804
0.3721
0.3783
0.3646
0.3702
0.3722
0.3719
0.3797
0.3782
0.3837
0.3763
0.3760
0.3719
0.3797
0.3736
0.3874
0.3802
0.3916
0.3782
0.3837
0.3782
0.3837
0.3802
0.3916
0.3869
0.3958
0.3847
0.3877
0.3763
0.3760
0.3782
0.3837
0.3847
0.3877
0.3825
0.3798
0.3825
0.3798
0.3847
0.3877
0.3912
0.3917
0.3887
0.3836
0.3847
0.3877
0.3912
0.3917
0.3869
0.3958
0.3937
0.4001
0.3912
0.3917
0.3937
0.4001
0.4006
0.4044
0.3978
0.3958
0.3887
0.3836
0.3912
0.3917
0.3978
0.3958
0.3950
0.3875
0.3783
0.3646
0.3804
0.3721
0.3863
0.3758
0.3840
0.3681
0.3804
0.3721
0.3825
0.3798
0.3887
0.3836
0.3863
0.3758
0.3863
0.3758
0.3887
0.3836
0.3950
0.3875
0.3924
0.3794
0.3840
0.3681
0.3863
0.3758
0.3924
0.3794
0.3898
0.3716
0.3889
0.3690
0.3915
0.3768
0.3981
0.3800
0.3953
0.3720
0.3915
0.3768
0.3941
0.3848
0.4010
0.3882
0.3981
0.3800
0.3981
0.3800
0.4010
0.3882
0.4080
0.3916
0.4048
0.3832
0.3953
0.3720
0.3981
0.3800
0.4048
0.3832
0.4017
0.3751
0.3941
0.3848
0.3968
0.3930
0.4040
0.3966
0.4010
0.3882
0.3968
0.3930
0.3996
0.4015
0.4071
0.4052
0.4040
0.3966
0.4040
0.3966
0.4071
0.4052
0.4146
0.4089
0.4113
0.4001
0.4010
0.3882
0.4040
0.3966
0.4113
0.4001
0.4080
0.3916
0.4080
0.3916
0.4113
0.4001
0.4186
0.4037
0.4150
0.3950
0.4113
0.4001
0.4146
0.4089
0.4222
0.4127
0.4186
0.4037
0.4186
0.4037
0.4222
0.4127
0.4299
0.4165
0.4259
0.4073
0.4150
0.3950
0.4186
0.4037
0.4259
0.4073
0.4221
0.3984
0.4017
0.3751
0.4048
0.3832
0.4116
0.3865
0.4082
0.3782
0.4048
0.3832
0.4080
0.3916
0.4150
0.3950
0.4116
0.3865
0.4116
0.3865
0.4150
0.3950
0.4221
0.3984
0.4183
0.3898
0.4082
0.3782
0.4116
0.3865
0.4183
0.3898
0.4147
0.3814
0.4147
0.3814
0.4183
0.3898
0.4242
0.3919
0.4203
0.3833
0.4183
0.3898
0.4221
0.3984
0.4281
0.4006
0.4242
0.3919
0.4242
0.3919
0.4281
0.4006
0.4342
0.4028
0.4300
0.3939
0.4203
0.3833
0.4242
0.3919
0.4300
0.3939
0.4259
0.3853
5A2
5B2
5C2
5D2
6A2
6B2
6C2
6D2
7A2
Region
5A3
5B3
5C3
5D3
6A3
6B3
6C3
6D3
7A3
Region
5A4
5B4
5C4
5D4
6A4
6B4
6C4
6D4
7A4
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp ® XP-L LED
Performance Groups – Chromaticity (continued)
Region
7B1
7C1
7D1
8A1
8B1
8C1
8D1
x
y
0.4221
0.3984
0.4259
0.4073
0.4322
0.4096
0.4281
Region
x
y
0.4259
0.4073
x
y
x
y
0.4322
0.4096
0.4281
0.4006
0.4299
0.4165
0.4364
0.4188
0.4322
0.4096
0.4364
0.4188
0.4430
0.4212
0.4385
0.4119
0.4006
0.4322
0.4096
0.4385
0.4119
0.4342
0.4028
0.4342
0.4028
0.4385
0.4119
0.4449
0.4141
0.4403
0.4049
0.4385
0.4119
0.4430
0.4212
0.4496
0.4236
0.4449
0.4141
0.4449
0.4141
0.4496
0.4236
0.4562
0.4260
0.4513
0.4164
0.4403
0.4049
0.4449
0.4141
0.4513
0.4164
0.4465
0.4071
0.4259
0.3853
0.4300
0.3939
0.4359
0.3960
0.4316
0.3873
0.4300
0.3939
0.4359
0.3960
0.4342
0.4028
0.4403
0.4049
0.4359
0.3960
0.4403
0.4049
0.4465
0.4071
0.4418
0.3981
0.4316
0.3873
0.4359
0.3960
0.4418
0.3981
0.4373
0.3893
0.4373
0.3893
0.4418
0.3981
0.4475
0.3994
0.4428
0.3906
0.4418
0.3981
0.4465
0.4071
0.4523
0.4085
0.4475
0.3994
0.4475
0.3994
0.4523
0.4085
0.4582
0.4099
0.4532
0.4008
0.4428
0.3906
0.4475
0.3994
0.4532
0.4008
0.4483
0.3919
0.4465
0.4071
0.4513
0.4164
0.4573
0.4178
0.4523
0.4085
0.4513
0.4164
0.4562
0.4260
0.4624
0.4274
0.4573
0.4178
0.4573
0.4178
0.4624
0.4274
0.4687
0.4289
0.4634
0.4193
0.4523
0.4085
0.4573
0.4178
0.4634
0.4193
0.4582
0.4099
0.4582
0.4099
0.4634
0.4193
0.4695
0.4207
0.4641
0.4112
0.4634
0.4193
0.4687
0.4289
0.4750
0.4304
0.4695
0.4207
0.4695
0.4207
0.4750
0.4304
0.4813
0.4319
0.4756
0.4221
0.4641
0.4112
0.4695
0.4207
0.4756
0.4221
0.4700
0.4126
0.4483
0.3919
0.4532
0.4008
0.4589
0.4021
0.4538
0.3931
0.4532
0.4008
0.4582
0.4099
0.4641
0.4112
0.4589
0.4021
0.4589
0.4021
0.4641
0.4112
0.4700
0.4126
0.4646
0.4034
0.4538
0.3931
0.4589
0.4021
0.4646
0.4034
0.4593
0.3944
7B2
7C2
7D2
8A2
8B2
8C2
8D2
Region
7B3
7C3
7D3
8A3
8B3
8C3
8D3
Region
7B4
7C4
7D4
8A4
8B4
8C4
8D4
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp ® XP-L LED
Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve
ANSI Cool White
0.40
5000 K
0.39
5700 K
0.38
3S
0.37
6500 K
2T
0.36
2C
1T
0.35
CCy
3B
2S
8000 K
0T
0.33
0S
0.32
0.31
2D
1C
0C
1D
0D
2U
2R
1A
0A
3R
2A
1B
0B
3A
2B
1S
0.34
ANSI
C78.377A
1U
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Neutral White
0.44
0.43
3500 K
6T
0.42
4000 K
0.41
4500 K
5T
0.40
5S
5000 K
0.39
CCy
6S
4T
5B3
5B2
4S
0.38
3T
3S
0.37
5A2
4B
3C
0.36
3B
3D
0.35
4D
4A
5A1
5B4
5D2
5A3
5A4
5C4
5C1
5D1
5D3
5D4
6B1
6A1
6A4
6D3
6D2
6A3
6A2
6C4
6C1
6B4
6D4
6D1
6U
6R
5U
5R
4U
3A
0.34
5B1
4C
6B2
5C3
5C2
6C3
6C2
6B3
ANSI
C78.377A
4R
3U
3R
0.33
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
CCx
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp ® XP-L LED
Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve - continued
ANSI Neutral White and ANSI Warm White
0.46
0.45
2700 K
3000 K
0.44
0.43
3500 K
0.42
4000 K
CCy
0.41
6C2
6B3
0.40
6B2
5C3
0.39
5B3
5C4
5B4
0.38
5B1
4C
0.37
4D
3B
5D2
6D4
7A1
7A4
7A3
7D1
7D2
7D4
7D3
8A1
8B1
7C4
8A3
8A2
8A4
8D1
8B3
8B2
8B4
8D2
8C2
8C1
8C3
8C4
8D3
8D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
3C
0.36
6A2
7A2
6D3
6D2
6A3
5D3
5A3
5A2
4B
6B1
5C1
5B2
6C1
6B4
5C2
5000 K
7C1
7B4
7B1
6C4
7C2
7B3
7B2
6C3
4500 K
7C3
5A1
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp ® XP-L LED
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions
0.40
0.40
5000 K
0.39
0.38
3S
51
6500 K
0.36
6500 K
0T
0C
0A
0S
CCy
0.32
0.31
1R
0C
0D
0A
0U
CCx
CCx
0.40
0.40
5000 K
0.39
5000 K
0.39
0.38
5700 K
0.38
6500 K
0.36
2T
6500 K
8000 K
1U
0A
0R
ANSI
C78.377A
2R
1U
1R
0U
0.36
0.35
CCx
0.34
0.28
0.36
0.35
0.34
0.33
0.32
0.28
0.31
0.28
0.30
2U
0R
0.29
0.29
1D
1A
0D
0.30
0.29
0.28
0C
0B
0.31
1R
0U
0.30
0S
0.32
3R
2A
1B
0.33
0A
ANSI
C78.377A
2R
1A
0D
0T
0.33
2U
2D
1C
0.32
0B
0.31
1D
3A
2B
1S
0.31
0.32
2A
1B
0C
2C
8000 K
0.34
3B
2S
1T
3R
0.30
0S
2D
1C
0.29
0T
0.33
3A
2B
1S
2T
E1
0.35
CCy
0.34
0.36
3B
2C
1T
3S
0.37
2S
0.35
5700 K
3S
50
0.37
CCy
0.36
0.30
0.29
0.28
0.36
0.35
0.34
0.33
0.32
0.28
0.31
0.28
0.30
0.29
0.29
1R
0R
0.29
0.28
1U
0U
0.30
0R
ANSI
C78.377A
2R
1A
0B
2U
1D
0.35
0.30
1U
3R
2A
1B
0.34
0.31
ANSI
C78.377A
2R
1A
0D
2D
1C
0.33
0B
0T
3A
2B
1S
0.33
2U
1D
0.34
0.32
0S
0.32
3R
2A
1B
8000 K
2D
3B
2C
1T
3A
2B
1C
3S
2T
2S
0.35
0.31
0.33
0.36
3B
1T
1S
53
0.37
2C
8000 K
0.34
5700 K
2T
2S
0.35
CCy
0.38
5700 K
0.37
5000 K
0.39
CCx
0.40
5000 K
0.39
0.38
5700 K
E2
0.37
6500 K
0.36
3B
2S
0.35
CCy
3S
2T
2C
1T
8000 K
0.34
0T
0.33
0S
0.32
0C
0.31
3R
2A
2U
1D
ANSI
C78.377A
2R
1A
0D
0A
2D
1C
1B
0B
3A
2B
1S
1U
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp ® XP-L LED
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions
0.46
0.45
2700 K
3000 K
0.44
0.43
0.42
4000 K
0.41
E6
4500 K
E5
0.40
CCy
E7
3500 K
5000 K
0.39
0.38
E3
0.37
0.36
E4
4B
3C
4D
3B
5B1
5D2
5A3
5D4 6A1
5A2
5D1
5A4
5A1
6D2
6A3
5D3 6A2
6A4
6D1
7A4
7A1
6D4
7A3
7A2
6D3
7D1
8B2
8B3
8C1
8B4
8C2
8C3
8C4
8D3
8D2
8D4
8A4 8D1
8A1
7D4
8A3
8A2
7D3
7D2
8B1
7C4
7C1
7B4
7B1
6C4
6C1
6B4
5C4 6B1
5C1
5B4
4C
6B2
5C3
5C2
5B3
5B2
6C2
6B3
7C2
7B3
7B2
6C3
7C3
E8
ANSI
C78.377A
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43
3500 K
0.42
4000 K
0.41
4500 K
CCy
0.40
F5
5000 K
0.39
F4
0.38
0.37
4B
3C
0.36
4D
3B
5B3
5C4
5C1
5B4
5D3 6A2
5B1
5D2
5A3
5D4 6A1
5A2
5D1
5A4
5A1
6C2
6B3
6B4
6B1
6A3
6A4
7B2
6C3
6B2
5C3
5C2
5B2
4C
F6
F7
6C1
6D2
6D1
7B1
6C4
6D3
6D4
7A2
7A1
7A4
F8
7A3
7D1
7C2
7B3
7B4
7C1
7D4
8B1
7C4
7D3
7D2
7C3
8A1
8A2
8A3
8B2
8B3
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
8A4 8D1
ANSI
C78.377A
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp ® XP-L LED
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Continued
0.46
0.45
2700 K
3000 K
0.44
0.43
0.42
Z6
4000 K
0.41
Z5
4500 K
0.40
CCy
Z7
3500 K
5C3
5000 K
0.39
5C2
5B3
0.38
4C
0.37
4B
3C
0.36
4D
3B
6B2
6B4
5C4 6B1
5C1
5B2
6C2
6B3
6A3
5B4
5D3 6A2
5D2
6A4
5A3
5D4 6A1
5A2
5D1
5A4
5A1
5B1
6C1
6D2
6D1
7B1
6C4
6D3
6D4
7A2
7A1
7A4
7B3
7B2
6C3
7B4
7A3
7D1
7C2
7C1
7D4
8B1
7C4
7D3
7D2
7C3
8A1
8A2
8A3
8B2
Z8
8B3
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
8A4 8D1
ANSI
C78.377A
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp ® XP-L LED
Cree’s Standard Chromaticity Kits
The following table provides the chromaticity bins associated with chromaticity kits.
Color
Cool
White
Neutral
White
Warm
White
CCT
Kit
Chromaticity Bins
6200 K
51
0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K
53
1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K
50
1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K
E1
1A, 1B, 1C, 1D
5700 K
E2
2A, 2B, 2C, 2D
5000 K
E3
3A, 3B, 3C, 3D
4750 K
F4
3C, 3D, 4A, 4B
4500 K
E4
4A, 4B, 4C, 4D
4250 K
F5
4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K
E5
5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
4000 K
Z5
5A3, 5B4, 5C1, 5D2
3750 K
F6
5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K
E6
6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3500 K
Z6
6A3, 6B4, 6C1, 6D2
3250 K
F7
6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K
E7
7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
3000 K
Z7
7A3, 7B4, 7C1, 7D2
2850 K
F8
7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K
E8
8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2700 K
Z8
8A3, 8B4, 8C1, 8D2
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLamp ® XP-L LED
Bin and Order Code Formats
XP-L bin codes and order codes are configured in the following manner:
Order CodeBin Code
Series
XPL = XP-L
Series
XPL = XP-L
Class
0 = High density
H = High intensity
Class
0 = High density
H = High intensity
CRI specification
0 = Cool White
B = 70 CRI minimum
L = Standard CRI
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
Luminous flux group
CRI specification
0 = Cool White
B = 70 CRI minimum
L = Standard CRI
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
Chromaticity group
SSSCCC-B-WWW-FFF-GN-AAAA
SSSCCC-BD-HHHH-HHHNFFNNN
Luminous flux group
Internal code
Internal code
Chromaticity
group
Color
AWT = White
Color
AWT = White
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
XLamp ® XP-L LED
Reflow Soldering Characteristics
In testing, Cree has found XLamp XP-L LEDs to be compatible with JEDEC J‑STD‑020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
IPC/JEDEC J-STD-020C
Time
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
Preheat: Time (tsmin to tsmax)
170 °C
65-150 seconds
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
217 °C
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
28
XLamp ® XP-L LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM‑80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XP-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative
to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon
request.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
29
XLamp ® XP-L LED
Notes - Continued
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
30
XLamp ® XP-L LED
65
54
6
5
6
NOTICE
NOTICE
NOTICE
CREE
CONFIDENTIAL.
PLOT
INFORMATION
CREE
CONFIDENTIAL.
THISTHIS
PLOT
ANDAND
THETHE
INFORMATION
DENTIAL. THIS
PLOT
AND
THE INFORMATION
CONTAINED
WITHIN
PROPRIETARY
CONTAINED
WITHIN
ARE
THETHE
PROPRIETARY
ANDAND
WITHIN ARE
THE
PROPRIETARY
ANDARE
CONFIDENTIAL
INFORMATION
OF CREE,
PLOT
CONFIDENTIAL
INFORMATION
OF CREE,
INC.INC.
THISTHIS
PLOT
AL INFORMATION
OF CREE,
INC.
THIS PLOT
Mechanical
Dimensions
BEDISCLOSED
COPIED,
REPRODUCED
OR DISCLOSED
TO ANY
MAYMAY
NOTNOT
BEOR
COPIED,
REPRODUCED
TO ANY
COPIED, REPRODUCED
TO ANY OR DISCLOSED
UNAUTHORIZED
PERSON
THE
WITHOUT
WRITTEN
CONSENT
UNAUTHORIZED
PERSON
THEWITHOUT
WRITTEN
CONSENT
ZED PERSON
THE
WITHOUT
WRITTEN
CONSENT
OF CREE
OF CREE
INC.INC.
.
4
43
3
32
REV
REVISO
REV
DESCRIPTION
All measurements are ±.13 mm unless otherwise indicated.
XP-L High Density
D D
XPLAWT-00-xxxx-xxxxxxxxx
2
REV
3.45 ±.2 mm
BY
DESCRIPTION
3.45mm
±.22.68
mm
3.45 ±.2
DATE APP'D
.50
.58
3.30
3.30 3.30
2.68 2.68
2.30
2.30 2.30
.50
.58 .58
.50 .50
.50 .50
3.30 3.30
REF. REF.
3.30
REF.
3
R
D
3.45 3.45
±.2 mm
±.2 mm
C C
3.30 3.30 3.30
REF.
3.30
3.30
REF.
6
5
4
2
1
R1.95R1.95
REVISONS
R1.95
NOTICE
CREE CONFIDENTIAL.
THIS
PLOT
AND
THE
INFORMATION
REV AREOPTICAL
BY DATE APP'D
DESCRIPTION
OPTICAL
OPTICAL
CONTAINED
WITHIN
THE
PROPRIETARY
OPTICAL
REFERENCEAND
REFERENCE
OPTICAL REFERENCE
1.30 1.30
CONFIDENTIAL INFORMATION OF CREE, INC.1.30
THIS PLOT
REFERENCE
REFERENCE
3.30
3.30
MAYTop
NOT
BE
COPIED,
REPRODUCED
OR
DISCLOSED
TO
ANY
C
Bottom
View
View
Side View
ALTERNATIVE
UNAUTHORIZED
PERSON
THE
WRITTEN CONSENT
REF.
REF.WITHOUT
PRIMARY
PRIMARY
PRIMARY
OF CREE INC.
3
3
ALT
ALTERNAT
ALTERNATIVE
.50 .50
.50
.50
.50 Density
.50 D views of the XP-L High
Alternate bottom
LED are shown
in the diagrams below.
.50 .50
.50
0
0
NATIVE
0
1
High
Density
REVISONS
2.68
3.45 ±.2 mm
B
D
.64
2.30
ALTERNATIVE
B
3.30
REF.
3.30
3.30
REF.
REF.
3.30 3.30
B
3.30
3.30
3.30
REF.
REF.
3.45
±.2 mm
C
1.30 1.30
.50
.58
.50
.25 .25
.25
3.30 3.30
3.30
3.30
.64 .64
AL
.75 .75
.75
3.30
REF.
C
3.30
1.01 1.01
ALL DIMENSIONS
ALL
DIMENSIONS
ARE ±AR
.1
1.01
ALL DIMENSIONS ARE ± .13MM
UNLESS
OTHERWISE
NO
1.30
2.30 2.30
2.30
DATE
BY
3.30 3.30
3.30
UNLESS
OTHER
UNLESS
OTHERWIS
UNLESS OTHERWISE DRAWN
SPECIFIED
3.30 3.30
D. CRONIN3/26/14
A A3.30
DIMENSION
DIMENSIONS
ARE
DIMENSIONS ARE IN
CHECK
DATE
MILLIMETERS
MILLIMETERS
AND A
MILLIMETERS AND AFTER
FINISH.
TOLERANCE
UN
TOLERANCE
UNLES
TOLERANCE UNLESS SPECIFIED:
RECOMMENDED
STENCIL
PATTERN
RECOMMENDED
STENCIL
PATTERN
RECOMMENDED STENCIL PATTERN
± .2
.XX ± .XX.25
.XX ± .25
DATE
APPROVED
PCB SOLDER
PCB SOLDER
PAD PADR1.95
RECOMMENDED PCB SOLDER RECOMMENDED
PAD RECOMMENDED
± .1
.XXX
±.XXX
.125
TITLE
.XXX± .125
(HATCHED
AREA
IS
OPENING)
(HATCHED
AREA
IS
OPENING)
(HATCHED
AREA
IS
OPENING)
X° ± X° .5±° .5
ALTERNATIVE
X°THIRD
± THIRD
.5°ANGLE
ANGLE
PROJECTION
PROJECTION
OUTL
OPTICAL
MATERIAL
OPTICAL REFERENCE THIRD ANGLE PROJECTION
FOR SHEET
ME
FOR SHEET
METAL
FOR SHEET
ONLY
1.30 METAL PARTS
0
REFERENCE
± 1D
.X SIZE
± .X 1.5
.X ± 1.5
ALTERNATIVE
.XX
±
.7
.XX
±
.75
.XX
±
.75
A
ALTERNATIVE
Bottom
Bottom
View
Bottom View
.XXX
.XXX±FINISH
.25± .2
.XXX± View
.25
FINAL PROTECTIVE
PRIMARY
MARY
X° ± X°C.5±° .5
X° ± .5°
ARE ± .13MM UNLESS OTHERWISE NOTED
SCALE
1.6
1.6 FINI
1.6
SURFACE
SURFACE
FINISH:
SURFACE FINISH:
22.000
3.30
65
54
43
32
6
5
4
3
6
REF.
DATE
BY
HERWISE DRAWN
SPECIFIED
4600 Silicon Drive
D. CRONIN3/26/14
Anode
ONS ARE IN
.50
Durham, N.C .50
27703
CHECK
DATE
S AND AFTER
FINISH.
Phone (919) 313-5300
UNLESS SPECIFIED:
Fax (919) 313-5558
.50
.25 .64 APPROVED
DATE
A
.64
TITLE
.125
.5°
OUTLINE DRAWING XPL
B
MATERIAL
METAL PARTS
ONLY
1.5
®
REV.
DRAWING
NO.
Copyright © 2014-2016
Cree,
Inc.
All
rights
reserved.
The
information
in
this
document
is
subject
to
change
without
notice.
Cree
and
XLamp® are registered trademarks and the Cree logo and SC5
SIZE
3.30
.75
B
®
.25
Technology™
are trademarks
of Cree, Inc. UL2610-00040
and the UR logo are registered trademarks of UL LLC.
FINAL
PROTECTIVE
FINISH
REF.
C
C
.5°
SCALE
SHEET
OF 1/1
1.6
INISH:
22.000
31
2
1
.25
.25
XLamp ® XP-L LED
5
4
6
5
4
6
5
4
TICE
NOTICE NOTICE
TIAL.
THIS
PLOT
AND
THE
INFORMATION
6
5
6
5
E CONFIDENTIAL.
THIS
PLOT
AND
THE
INFORMATION
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
HIN
ARE
THE PROPRIETARY
AND
TAINED
WITHIN
ARE
THE PROPRIETARY
AND
CONTAINED
WITHIN
ARE
THE PROPRIETARY
AND
NOTICE
NOTICE
NFORMATION
OF CREE,
INC.
THIS
PLOT
FIDENTIAL
INFORMATION
OF
CREE,
INC.
THISPLOT
PLOT
CONFIDENTIAL
INFORMATION
OF
CREE,
INC.
THIS
PLOT
CREE
CONFIDENTIAL.
THIS
AND
THE
INFORMATION
CREE
CONFIDENTIAL.
THIS
PLOT
AND
THE
INFORMATION
Dimensions
-ANY
Continued
PIED,
REPRODUCED
OR
DISCLOSED
TO
Y NOT MAY
BEMechanical
COPIED,
REPRODUCED
OR
DISCLOSED
TO
ANY
NOT
BE
COPIED,
REPRODUCED
OR
DISCLOSED
TO
ANY
CONTAINED
WITHIN
ARE
THE
PROPRIETARY
AND
CONTAINED
WITHIN
ARE
THE
PROPRIETARY
AND
PERSON
THEWITHOUT
WRITTEN
CONSENT
UTHORIZED
PERSON
THE
WITHOUT
WRITTEN
CONSENT
UNAUTHORIZED
PERSON
THE
WITHOUT
WRITTEN
CONSENT
CONFIDENTIAL
INFORMATION
CREE,
INC.
THIS
PLOT
CONFIDENTIAL
INFORMATION
OFOF
CREE,
INC.
THIS
PLOT
CREE INC.
OF CREE INC.
MAY
NOT
COPIED,
REPRODUCED
DISCLOSED
ANY
MAY
NOT
BEBE
COPIED,
REPRODUCED
OROR
DISCLOSED
TOTO
ANY
UNAUTHORIZED
PERSON
THE
WITHOUT
WRITTEN
CONSENT
XP-L High
Intensity
UNAUTHORIZED
PERSON
THE
WITHOUT
WRITTEN
CONSENT
CREE
INC.
OFOF
CREE
INC.
3
3
2
3
4 4
REV
2
REVISONS
3
3
REVDESCRIPTION
REV
DES
XPLAWT-H0-xxxx-xxxxxxxxx
D
High Intensity
3.30
D D
3.30
.50
3.45
3.45
2.30
3.45
.50
3.453.45
.50
3.30
.50
.50
2.30
3.3
2.30
2.3
.50
.50 .50
Anode
3.45
3.30
3.45
3.30
3.453.45
C
C C
TICAL
ENCE
OPTICAL
REFERENCE
OPTICAL
OPTICAL
REFERENCE
REFERENCE
OPTICAL
OPTICAL
REFERENCE REFERENCE
.50
.50
.50
.50
.50
.50
.50 .50
.50
1.30
Bottom View
.50
.64
.50 .50
B
1.0 1.0
Side View
XP-L High Density & High Intensity
1.30
1.3
1.0
OPTICAL 1.0
OPTICAL
REFERENCE
REFERENCE
Top View
.50
1.30
OPTICAL
OPTICAL
REFERENCE1.0
REFERENCE
.64
.50 .50
.64
.64 .64
B B
3.30
3.30
3.30
3.30
.25
3.30
3.303.30
1.30
.25
.25 .25
3.303.30
.75
1.30
.25
1.30
.75
1.01
2.30
3.30
1.01
2.30
3.30
1.01
2.30
3.30
4
4
4
.75
.75
ALL.75
DIMENSIONS
ARE
± .13MM
ALL
DIMENSIONS
ARE ± O
.1
ALLUNLESS
DIMENSIO
A
DATE
DRAWN
BY
DATE
DRAWN
BY
DRA
UNLESS OTHERWISE
SPECIFIED
UNLESS
OTHERWISE
SPECIFIED
UNLESS
OTHERWISE
SPEC
D. CRONIN
3/13/15
D. CRONIN
3/13/1
IN
D. CR
1.011.01 DIMENSIONS ARE
DIMENSIONS
ARE
IN
DIMENSIONS
ARE
IN
CHECK
DATE
MILLIMETERS AND
AFTER FINISH.
3.30
CHECK
DATE
CHEF
MILLIMETERS
AND AFTER
FINISH.
3.30
MILLIMETERS
AND
AFTER
UNLESS
OT
2.302.30
UNLESS
OTHE
TOLERANCE UNLESS
SPECIFIED:
TOLERANCE
UNLESS SPECIFIED:
TOLERANCE
UNLESS
SPEC
A A
DIMENSI
DIMENSION
.XX
±
.25
DATE
APPROVED
.XX
±
.25
.XX
±
.25
DATE
APPROVED
APP
RECOMMENDED
STENCIL
PATTERN
3.30
3.30
RECOMMENDEDRECOMMENDED
PCB SOLDER
PAD
MILLIMETER
RECOMMENDED
STENCIL PATTERN
MILLIMETERS
A
3.303.30
TITLE
RECOMMENDED
STENCIL
PATTERN .XXX± .125
PCB SOLDERPCB
PADSOLDER
RECOMMENDED
PAD
.XXX
±
.125
.XXX
±
.125
X° ± .5°
UN
(HATCHED AREA(HATCHED
IS OPENING)
X° ± .5° X° ± TOLERANCE
.5°TOLERANCE
AREA
IS OPENING)
(HATCHED
AREAANGLE
IS OPENING)
THIRD
PROJECTION
OUTLINE
D
MATERIAL
THIRD
ANGLE
PROJECTION
THIRD
ANGLE
PROJECTION
.XX
±
.XX
±
.2
MATERIAL
MAT
FOR
SHEET
METAL
PARTS
ONLY
FOR
SHEET
METAL
PARTS
ONLY
FOR SHEET METAL
PARTS
RECOMMENDED
STENCIL
PATTERN
RECOMMENDED
STENCIL
PATTERN
RECOMMENDED
PCB
SOLDER
RECOMMENDED
PCB
SOLDER
.XXX
±
Recommended
PCB
Solder
PadPADPAD
Recommended
Stencil
.XXX
± .1
.XPattern
± 1.5
.X ± 1.5 .X ± SIZE
1.5 X° DRAW
X
±° ±.5
(HATCHED
AREA
IS OPENING)
(HATCHED
AREA
IS OPENING)
.XX ± .75 THIRD
THIRD
ANGLE
.XXANGLE
± PROTECTIVE
.75 PROJECTION
.XXPROJECTION
± FOR
.75FOR
SHEET
SHEET
ME
.XXX
±
.25
FINAL
FINISH
2
.XXX± .25 .XXX
FINAL
(Hatched Area Is Open)
± .25
FINAL
CPROTECTIV
X° ± .5°
±1
X° ± .5° X° ±SCALE
.5° .X ±.X
.XX.XX
± ±.7
1.6
1.6
22.000
SURFACE FINISH:
1.6
A
1.301.30
3.30
6
6
5
5
6 6
5
5 5
3
3
4 4
SURFACE FINISH:
SURFACE FINISH:.XXX
.XXX
±
± .2
±° ±.5
2
2 X° X
3
1.F
SURFACE
SURFACE
FINI
3 3
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
32
A
XLamp ® XP-L LED
B
Tape and Reel
A
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
6
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
OF CREE INC.
66
5
4
55
44
Except as noted, all dimensions in mm [inches]
XP-L High Density
NOTICE
NOTICE
CREE
CONFIDENTIAL.
THIS
PLOT
AND
THE
INFORMATION
CREE
CONFIDENTIAL.
THIS
PLOT
AND
THE
INFORMATION
CONTAINED
WITHIN
ARE
THE
PROPRIETARY
AND
6
CONTAINED
WITHIN
ARE
THE
PROPRIETARY
AND
CONFIDENTIAL
INFORMATION
OF
CREE,
INC.
THIS
PLOT
CONFIDENTIAL
INFORMATION
OF
CREE,
INC.
THIS
PLOT
NOTICE
MAY
NOT
BE
COPIED,
REPRODUCED
OR
DISCLOSED
TO
ANY
MAY
NOT
BE
COPIED,
REPRODUCED
OR
DISCLOSED
TO
ANY
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
D UNAUTHORIZED
UNAUTHORIZED
PERSONWITHOUT
WITHOUT THE
THE
WRITTEN
CONSENT
PERSON
WRITTEN
CONSENT
CONTAINED WITHIN ARE THE PROPRIETARY AND
OF
CREE
INC.
OF
CREE
INC.
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
XPLAWT-00-xxxx-xxxxxxxxx
2.00 [.079]
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
OF CREE INC.
DD
4.00 [.157]
[.157]
4.00
Po
Po
Ø1.50
+.10
-.00
1.75 [.069]
[.069]
1.75
E1
E1
CATHODESIDE
SIDE
CATHODE
1.75 [.069]
E1
CATHODE SIDE
C
Ø1.50
5.50
[.217]F
5.50
[.217]F
[.059]
D1
MIN
Ø1.50
Ø1.50
[.059]
[.059]
D1
D1
MIN
MIN
C
CC
ANODE SIDE
8.00 [.315]
P
ANODESIDE
SIDE
ANODE
POCKET
SIZE
POCKET
3.60
mmSIZE
[.142"]
POCKET SIZE
3.60mm
mm[.142"]
[.142"]
3.60
3.00 mm
[.118"]
Ao 3.60 mm [.142"]
3.60mm
mm[.142"]
[.142"]
3.60
Ko-Ko
[.142]
3.00
mm
[.118"]
3.00
mm
Ko3.60
-[.118"]
3.00 mm [.118"]
3.0
°
Bo -
10.25
[.404]
E2
12.30 [.484]
12.00
[.472]
12.00
[.472]
MAX
5.50
[.217]F
NOMINAL
NOMINAL
W
10.25
10.25
[.404]
[.404]
E2
E2
12.30[.484]
[.484]
12.30
Ø1.50
MAX
MAX
[.059]
W
W
D1
8.00 [.315]
P
8.00 [.315]
[.315]
8.00
1.75±.10
PP
B
3.0 °
+.3
12.0
.0
3.60 [.142]
Ao
12.00 [.472]
NOMINAL
.30 [.012]
T
1.5±.1
3.00 [.118]
8.0±.1
Ko
.30 [.012]
T
.30 [.012]
[.012]
.30
TT
2.5±.1
3.00 [.118]
Cathode
Ko Side
Anode Side
B
B
3.00 [.118]
[.118]
3.00
3.0 °
Ko
Ko
BB
3.0 °°
3.0
3.60 [.142]
Ao
Anode Side
(denoted by + and circle)
DATE
UNLESS OTHERWISE SPECIFIED
UNLESS OTHERWISE SPECIFIED
D. CRONIN
5/16/14 ARE IN
DIMENSIONS
DIMENSIONS ARE IN
MILLIMETERS
CHECK
DATE AND AFTER FINISH.
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XX ±
.25
DATE
APPROVED
.XXX ±
.125
TITLE
.XXX ±
.125
X°
±
.5 °
ANGLE
X° THIRD
±
.5 ° PROJECTION
User Feed Direction
A
User Feed Direction
D. CRONIN
AA
6
5
5
4
Trailer
Trailer
160mm (min) of
160 mm (min.)
emptyof
pockets
empty
pockets
sealed with tape
55
sealed with
tape
(20 pockets min.)
(20 pockets min.)
4
3
THIRD
ANGLE
PROJECTION
THIRD
ANGLE
PROJECTION
Loaded Pockets
Loaded Pockets
(1,000 Lamps)
(500 Lamps)
FOR
SHEET
METAL
PARTS
ONLY
FOR
SHEET
METAL
PARTS
ONLY
.X.X ± ±
1.51.5
.XX ± ± .75.75
.XX
.XXX ± ± .25.25
.XXX
X°X° ± ± .5 .5° °
FINAL PROTECTIVE FINISH
SURFACE FINISH:
DATE
DATE
APPROVED
APPROVED
3
MATERIAL
MATERIAL
44
33
1.6
SCALE
TITLE
TITLE
Leader
C
APPROVED
DATE
4600 Silicon Drive
Durham, N.C 27703
4600 Silicon Drive
Durham, N.C 27703
Phone (919) 313-5300
Phone (919) 313-5300
Fax (919) 313-5558
Fax (919) 313-5558
Carrier Tape, XPL
MATERIAL
SIZE
DRAWING
NO.
FINAL PROTECTIVE
FINISH
Carrier Tape, XPL
2402-00040
SCALE
Fax (919) 313-5558
2
SHEET
REV.
DRAWING NO.
C
4600
Silicon
Drive
4600
Silicon
Drive
Durham,
N.C
27703 REV.
Durham,
N.C
27703
Phone
(919)
313-5300
Phone
(919)
313-5300
2402-00040
Fax 1.000
(919) 313-5558 A
1.000
A
A
TITLE
OF
SHEET
A
1 /1 A
A
OF
1 /1
1
1
CarrierTape,
Tape,XPL
XPL
Carrier
2
Leader
400mm (min) of
CC
400empty
mm (min.)
of with
pockets
1.000
emptyatpockets
with 1.000
least
100mm
22
at least
100
mm
sealed by tape
sealed
by tape
(50
empty
pockets min.)
(50 empty pockets min.)
SIZE
SIZE
FINAL
PROTECTIVE
FINISH
FINAL
PROTECTIVE
FINISH
SCALE
SCALE
SURFACE
FINISH: 1.61.6
SURFACE
FINISH:
5/16/14
DATE
START
FOR SHEET METAL PARTS ONLY
MATERIAL
DATE
DRAWN
DATE
DRAWN
BYBY
.X
±
1.5
.XX ±
.75
CRONIN
5/16/14
D.D.
CRONIN
5/16/14
.XXX ± SIZE
.25
CHECK
DATE
CHECK
DATE
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
UNLESS
OTHERWISE
SPECIFIED
UNLESS
OTHERWISE
SPECIFIED
.X
± ARE IN
1.5
DIMENSIONS
DIMENSIONS
ARE
IN
.XX ±
.75
MILLIMETERS
AND AFTER
FINISH.
MILLIMETERS
AND
.XXX AFTER
± FINISH.
.25
TOLERANCE
SPECIFIED:
TOLERANCE
UNLESS
X°UNLESS
± SPECIFIED:
.5 °
.XX
±
.25
.XX ±
.25
1.6
SURFACE
FINISH:
.XXX
.125
.XXX
± ± .125
X°X° ± ± .5 .5° °
DATE
DRAWN BY
CHECK
START
THIRD ANGLE PROJECTION
66
C
CC
MIN
3.60 [.142]
[.142]
3.60
Ao END
ENDAo
6
3.60 [.142]
Bo
12.30 [.484]
MAX
W
DRAWN BY
A
C
3.60 [.142]
[.142]
3.60
3.0 °
Bo
Bo
3.0 °°
3.0
10.25
[.404]
E2
3.60 mm [.142"]
Bo
ANODE SIDE
4.0±.1
BB
Bo Ao-Ao
Ko Bo-Bo
12.00 [.472]
NOMINAL
5.50 [.217]F
B
3
Ø1.50
+.10
-.00
4.00 [.157]
Po
POCKET SIZE
SECTION A-A
Ao
SCALE
23.60
: 1 mm [.142"]
4
1.75 [.069]
Ø1.50
Ø1.50
DETAILE1B
+.10
+.10
SCALE
2
:1
-.00
-.00
2.00 [.079]
CATHODE
P2 SIDE
D
33
5
P2
High
Density
4.00 [.157]
2.00 [.079]
[.079]
2.00
Po
P2
P2
3
REV.
REV.
DRAWING
NO.
DRAWING
NO.
2402-00040
2402-00040
SHEET
SHEET
AA
OFOF
1 1/1/1
11
User Feed Direction
Cover Tape
Pocket Tape
13mm
7"
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
33
B
XLamp ® XP-L LED
A
Tape and Reel - Continued
POCKET SIZE
XP-L High Intensity
SECTION
A-AmmSIZE
POCKET
SIZE
Ao - POCKET
3.70
[.146"]
SCALE 2 : 1
XPLAWT-H0-xxxx-xxxxxxxxx
High Intensity
4.00 [.157]
Po
4.00 [.157]
[.157]
4.00
Po
Po
2.00 [.079]
P2
2.00 [.079]
[.079]
2.00
P2
P2
Ø 1.50
+.10 +.0039
-.00[.0591-.0000]Do
DETAIL B
+.10 +.0039
: 1 -.00[.0591-.0000]Do
1.50+.102+.0039
-.00[.0591-.0000]Do
ØØSCALE
1.50
Ao
Bo -Ao
3.70 mm
mm [.146"]
[.146"]
3.70
Bo
Ko-Bo
3.70
mm [.146"]
[.146"]
1.20mm
[.047"] POCKET SIZE
3.70
Ko -Ko
1.20 mm
mm [.047"]
[.047"]
1.20
Ao - 3.70 mm [.146"]
1.75 [.069]
E1
1.75
[.069]
1.75 [.069]
2.00 [.079] E1
E1
+.10 +.0039
Ø 1.50
-.00[.0591-.0000]Do
P2
CATHODE SIDE
CATHODESIDE
SIDE
CATHODE
4.00 [.157]
Po
5.50 [.217]F
CATHODE SIDE
5.50 [.217]F
[.217]F
5.50
Ø 1.50
[.059]
1.50
ØØD1
1.50
MIN
[.059]
[.059]
D1
D1
MIN
MIN
ANODE SIDE
ANODE
SIDE
ANODE
SIDE
8.00 [.315]
P
8.00 [.315]
[.315] 4.0±.1
8.00
PP
1.75±.10
ANODE SIDE
8.00 [.315]
P
3.0°
+.3
12.0
.0
10.25
[.404]
E2
10.25
10.25
[.404]
[.404]
E2
E2
1.75 [.069]
12.00 [.472]
E1
NOMINAL
12.00 [.472]
[.472]
12.00
12.30
[.484]
NOMINAL
NOMINAL
MAX
12.30W
[.484]
12.30
[.484]
MAX
MAX
5.50 [.217]F
W
W
Ø 1.50
[.059]
D1
MIN
8.0±.1
1.20 [.047]
Ko
1.20 [.047]
[.047]
1.20
Ko
Ko
3.0°
3.0°
3.70 [.146]
Ao
3.70 [.146]
[.146]
3.70
Ao
Ao
10.25
[.404]
E2
Bo -
3.70 mm [.146"]
Ko -
1.20 mm [.047"]
3.0°
3.0°
3.0°
12.00 [.472]
NOMINAL
3.70 [.146]
Bo
3.70 [.146]
[.146]
3.0°
3.70
Bo
Bo
3.70 [.146]
Bo
12.30 [.484]
MAX
W
1.5±.1
.30 [.012]
T
.30 [.012]
[.012]
.30
TT
2.5±.1
Cathode Side
Anode Side
.30 [.012]
T
1.20 [.047]
Ko
Anode Side
3.0°
(denoted by + and circle)
User Feed Direction
END
START
3.70 [.146]
Ao
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
Loaded Pockets
(1,000 Lamps)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
User Feed Direction
Cover Tape
Pocket Tape
13mm
7"
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
34
XLamp ® XP-L LED
Packaging
Unpackaged Reel
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Label
CREE
Binwith
Code Cree Bin
&
Barcode
LabelLot #
Code,
Qty,
Label with Cree Bin Code,
Quantity, Reel ID
Label
with
Cree Bin
Label with
Customer
P/N, Qty,Qty,
Lot #, Lot
PO # #
Code,
Packaged Reel
Patent Label
Label with Customer Order
Label
with Cree Order Code,
Code, Qty, Reel ID, PO #
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
(on bottom of box)
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo and SC5
Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
35