A/D Converter Solutions
Analog, Digital & Mixed-Signal ICs, Modules, Subsystems & Instrumentation
High Speed Analog-to-Digital Converter
Product Selection Guide!
Communications Infrastructure
Digital Pre-Distortion (DPD) Loops
t
Direct Conversion Receivers
t
Diversity (MIMO) Receivers
t
Instrumentation
Digital Oscilloscopes
t
Spectrum Analyzers
t
Hi-Definition Video Digitizing
t
Sensing & Control
t
Ultrasound
t
Magnetic Resonance Imaging (MRI)
t
Radar & Security Sensors
t
Radio Astronomy & Atmospheric LIDAR
t
Analog-to-Digital Converter Solutions
We offer Analog-to-Digital Converters (ADCs) that combine high speed and
high SNR performance with lowest power dissipation. These ADCs provide
uniquely configurable functionality including: crosspoint switches, clock
dividers and programmable sampling rates / resolution / number of channels.
ADC
June 2011
REF# ADC-0611
Introduction
14
HMCAD1520 - Precision
HMCAD1520 - High Speed
HMCAD1102
RESOLUTION (Bits)
HMCAD1101
HMCAD1100
12/13
HMCAD1050-80
HMCAD1050-40
HMCAD1051-80
HMCAD1051-40
HMCAD1040-80
HMCAD1040-40
High Speed / Low Power A/D Converters
10
HMCAD1041-80
HMCAD1041-40
HMCAD1510 - High Speed
8
HMCAD1511 - High Speed
3
20
40
65
80
105
160
500
640
1000
SAMPLING RATE (MSPS)
Standard Analog-to-Digital Converter Products
Page 3
Hittite offers a wide range of High Speed ADCs for Communication, Instrumentation,
Industrial, Medical & Military applications. Low power consumption & high performance is
combined with a high degree of flexibility.
• Sampling Rates: 3 to 1000 MSPS
• Resolution: 8 to 14 bits
• CMOS & LVDS Outputs
• Configurable Power Consumption & Functionality with SPI Settings
• Integrated Instrumentation Functionality
EasySuite™ Eval Kits
Analog Made Easy™
With our Analog Made Easy™ philosophy, we are committed to user friendly products.
We have built multiple features & functionality into our ADCs that make our products easy
to use, thus reducing overall cost for the system designer.
• EasySuite™: Evaluation and Prototyping Platform Environment
• EasyBoard™: Supplied Evaluation Board Connected
to Xilinx© Standard FMC Board
• EasyStack™: Firmware Code Stack, Currently Available for Xilinx©
Custom Analog-to-Digital Converter Solutions
Hittite offers ADCs with customer specified integrated functions.
• Integrated LNA, VGAs and Analog Multiplexers (Analog Front End)
• Digital DownConverters (DDC)
• LVDS and JESD204 Outputs
• MCMs integrating RF and Microwave Functions with ADCs
ADC
2
June 2011
• Ultra High Speed GSPS ADCs, page 10
Visit us at www.hittite.com
Analog-to-Digital Converter Solutions: adc@hittite.com
Product Selection Guide
Part Number
HMCAD1520
HMCAD1511
HMCAD1510
Function / Mode
High Speed,
Single Channel
High Speed,
Dual Channel
High Speed,
Quad Channel
Precision,
Quad Channel
High Speed,
Single Channel
High Speed,
Dual Channel
High Speed,
Quad Channel
High Speed,
Single Channel
High Speed,
Dual Channel
High Speed,
Quad Channel
Resolution
(bits)
Sample
Rate
# of
Channels
Power
Dissipation [2][3]
SNR
(dBFS)
SFDR
(dBc)
12
640 MSPS
1
490 mW
70
60 / 75 [1]
12
320 MSPS
2
490 mW
70
60 / 78
[1]
12
160 MSPS
4
490 mW
70
60 / 78
[1]
14
105 MSPS
80 MSPS
4
4
603 mW
530 mW
74
75
83
85
8
1 GSPS
1
710 mW
49.8
8
500 MSPS
2
710 mW
49.8
Package
ECCN Code
EasySuite™
Evaluation Kit P/N
LP7DE
3A001.a.5.a.4
EKIT01-HMCAD1520
3A001.a.5.a.4
EKIT01-HMCAD1520
3A001.a.5.a.4
EKIT01-HMCAD1520
3A001.a.5.a.4
EKIT01-HMCAD1520
49 / 64
[1]
3A001.a.5.a.1
EKIT01-HMCAD1511
44 / 63
[1]
3A001.a.5.a.1
EKIT01-HMCAD1511
3A001.a.5.a.1
EKIT01-HMCAD1511
LP7DE
8
250 MSPS
4
710 mW
49.8
57 / 70
[1]
8
500 MSPS
1
295 mW
49.8
49 / 65
[1]
3A991.c.1
EKIT01-HMCAD1510
8
250 MSPS
2
295 mW
49.8
59 / 69
[1]
3A991.c.1
EKIT01-HMCAD1510
8
125 MSPS
4
295 mW
49.7
60 / 69
[1]
3A991.c.1
EKIT01-HMCAD1510
LP7DE
HMCAD1102
Octal Channel
13 / 12
80 MSPS
8
59 mW / Channel
70.1
77
LP9E
3A001.a.5.a.4
EKIT01-HMCAD1102
HMCAD1101
Octal Channel
13 / 12
65 MSPS
8
51 mW / Channel
72.2
82
LP9E
3A001.a.5.a.4
EKIT01-HMCAD1101
LP9E
HMCAD1100
Octal Channel
13 / 12
50 MSPS
8
41 mW / Channel
72.2
82
Octal Channel
Octal Channel
13 / 12
13 / 12
40 MSPS
20 MSPS
8
8
35 mW / Channel
23 mW / Channel
72.2
72.2
82
82
HMCAD1050-80
Dual Channel
Dual Channel
13 / 12
13 / 12
80 MSPS
65 MSPS
2
2
102 mW
85 mW
72
72.6
77
81
HMCAD1050-40
Dual Channel
Dual Channel
13 / 12
13 / 12
40 MSPS
20 MSPS
2
2
55 mW
30 mW
72.7
72.2
HMCAD1051-80
Single Channel
Single Channel
13 / 12
13 / 12
80 MSPS
65 MSPS
1
1
60 mW
50 mW
HMCAD1051-40
Single Channel
Single Channel
13 / 12
13 / 12
40 MSPS
20 MSPS
1
1
HMCAD1040-80
Dual Channel
Dual Channel
10
10
80 MSPS
65 MSPS
HMCAD1040-40
Dual Channel
Dual Channel
10
10
HMCAD1041-80
Single Channel
Single Channel
HMCAD1041-40
3A001.a.5.a.4
EKIT01-HMCAD1100
3A001.a.5.a.4
3A001.a.5.a.4
EKIT01-HMCAD1100
EKIT01-HMCAD1100
LP9AE
3A001.a.5.a.4
3A001.a.5.a.4
EKIT01-HMCAD1050-80
EKIT01-HMCAD1050-80
81
85
LP9AE
3A001.a.5.a.4
3A001.a.5.a.4
EKIT01-HMCAD1050-40
EKIT01-HMCAD1050-40
72
72.6
77
81
LP6HE
3A001.a.5.a.4
3A001.a.5.a.4
EKIT01-HMCAD1051-80
EKIT01-HMCAD1051-80
33 mW
19 mW
72.7
72.2
81
85
LP6HE
3A001.a.5.a.4
3A001.a.5.a.4
EKIT01-HMCAD1051-40
EKIT01-HMCAD1051-40
2
2
78 mW
65 mW
61.6
61.6
75
77
LP9AE
EAR99
EAR99
EKIT01-HMCAD1040-80
EKIT01-HMCAD1040-80
40 MSPS
20 MSPS
2
2
43 mW
24 mW
61.6
61.6
81
81
LP9AE
EAR99
EAR99
EKIT01-HMCAD1040-40
EKIT01-HMCAD1040-40
10
10
80 MSPS
65 MSPS
1
1
46 mW
38 mW
61.6
61.6
75
77
LP6HE
EAR99
EAR99
EKIT01-HMCAD1041-80
EKIT01-HMCAD1041-80
Single Channel
10
40 MSPS
1
25 mW
61.6
81
LP6HE
Single Channel
10
20 MSPS
1
15 mW
61.6
81
EAR99
EKIT01-HMCAD1041-40
EAR99
EKIT01-HMCAD1041-40
[1] Excluding Interleaving Spurs. [2] Supply Voltage (Vdd): +1.8 Vdc Analog Supply (AVdd) and +1.8 Vdc Digital Supply (DVdd) [3] Output Supply Voltage (OVdd): +1.7 to +3.6 Vdc
High Speed / Low Power A/D Converters
High Speed, Low Power Analog-to-Digital Converters
Hittite has consolidated the original Arctic Silicon Devices (ASD) part number options by their sampling rates into
14 Hittite part numbers. No ASD parts were discontinued. Contact: adc@hittite.com
Analog-to-Digital Converter Solutions: adc@hittite.com
Visit us at www.hittite.com
June 2011
3
A/D Converter Applications
Communications Infrastructure
Digital Pre-Distortion (DPD) Receiver Subsystem Featuring the HMCAD1520
HMC860LP3E
High PSRR DC Regulator
• 3.35 V - 5.6 V
PA
HMC685LP4E [2]
BiCMOS Mixer + LO
• 1.7 - 2.2 GHz RF
• +35 dBm IIP3
PLL
+3V
!
NEW HMC830LP6GE [1]
Wideband PLL + VCO
• 180 fs RMS Jitter
• Low Phase Noise,
-110 dBc/Hz @ 10 kHz
HMC680LP4E
5-Bit DVGA with
Differential Outputs
• 30 - 400 MHz
• -4 to +19 dB Gain
• +40 dBm OIP3
÷
1/2/4/8
SPI
A/D Converter Applications
ADC
4
CLK
REF
+5V
RESETN
CSN
SCLK
SDATA
VOUT
VIN
!
NEW
HMCAD1520
Dual Channel High Speed Mode
12-Bit A-to-D Converter
• 320 MSPS
• 2 Channels
PLL
Digital
Gain
LVDS
LVDS
FPGA
HMC624LP4E
6-Bit DATT
• DC - 6.0 GHz
• +55 dBm High IIP3
PLL
HMC820LP6CE [1]
Tri-band PLL + VCO
• Low Phase Noise,
-110 dBc/Hz @ 10 kHz
HMC1010LP4E
RMS Power Detector
• DC - 3.9 GHz
• 37 mV / dB RSSI Slope
• 60 dB Dynamic Range
ADC
Digital
Gain
LVDS
Dual Channel, 320 MSPS
12-Bit ADC
[1] You may choose from a variety of HMC PLL+VCO combinations specific to your application
[2] You may choose from a variety of MMIC Mixers specific to your application
June 2011
Visit us at www.hittite.com
Analog-to-Digital Converter Solutions: adc@hittite.com
A/D Converter Applications
Communications Infrastructure
Direct Conversion Receiver with Diversity Featuring the HMCAD1520
!
NEW HMC830LP6GE [2]
Wideband PLL + VCO
• 180 fs RMS Jitter
• Low Phase Noise,
-110 dBc/Hz @ 10 kHz
HMC860LP3E
High PSRR DC Regulator
• 3.35 V - 5.6 V
VOUT
VIN
PLL
+3V
HMC617LP3E [1]
LNA, 55 - 1200 MHz
• 0.5 dB Noise Figure
• 24 dB Gain
CLK
RESETN
CSN
SCLK
SDATA
REF
+5V
÷
1/2/4/8
SPI
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
0
HMC817LP3E [1]
Dual Channel LNA
• 55 - 1200 MHz
• 0.5 dB Noise Figure
HMC818LP3E [1]
Dual Channel LNA
• 1700 - 2200 MHz
• 0.5 dB Noise Figure
PLL
HMC820LP6CE [2]
Tri-band PLL + VCO
• Low Phase Noise,
-110 dBc/Hz @ 10 kHz
CROSSPOINT SWITCH
90°
FPGA
0
90°
4 Channel, 105 MSPS
14-Bit ADC
HMC597LP4E
Wideband Direct Demodulator
• 100 - 4000 MHz
• High Linearity: +25 dBm IIP3
& +60 dBm IIP2
• 15 dB Low Noise Floor
!
NEW HMC900LP5E
Dual Baseband LPF
• 3.5 to 50 MHz
• 3 dB BW Programmable
• 12 dB Noise Figure
• +30 dBm OIP3
! HMCAD1520
Precision Mode
14-Bit A-to-D Converter
• 80 MSPS
• 4 Channels
NEW
[1] You may choose from a variety of HMC LNAs specific to your application
[2] You may choose from a variety of HMC PLL+VCO combinations specific to your application
Analog-to-Digital Converter Solutions: adc@hittite.com
Visit us at www.hittite.com
June 2011
A/D Converter Applications
HMC597LP4E
HMC618LP3E [1]
LNA, 1700 - 2200 MHz
• 0.75 dB Noise Figure
• 16 dB Gain
PLL
HMC900LP5E
5
A/D Converter Applications
Communications Infrastructure
Heterodyne Receiver with MIMO Featuring the HMCAD1520
REF
HMC860LP3E
High PSRR DC Regulator
• 3.35 V - 5.6 V
HMC617LP3E [1]
LNA, 55 - 1200 MHz
• 0.5 dB Noise Figure
• 24 dB Gain
HMC618LP3E [1]
LNA, 1700 - 2200 MHz
• 0.75 dB Noise Figure
• 16 dB Gain
+5V
PLL
+3V
!
NEW
HMC830LP6GE [2]
Wideband PLL + VCO
• 180 fs RMS Jitter
• Low Phase Noise,-110 dBc/Hz @ 10 kHz
HMC680LP4E
5-Bit DVGA with Diff. Outputs
• 30 - 400 MHz
• -4 to +19 dB Gain
• +40 dBm OIP3
HMC624LP4E
6-Bit DATT
• DC - 6.0 GHz
• +55 dBm High IIP3
RF1
÷
1/2/4/8
SPI
HMC682LP6CE
Dual Downconverters
1700 - 2200 MHz
PLL
LVDS
HMC683LP6CE
Dual Downconverters
700 - 1000 MHz
RF2
LO
RF1
HMC890LP5E
HMC589ST89E
HMC891LP5E HBT Gain Block
Band Pass Filter
• DC - 4 GHz
• 200 ns Tuning
• 21 dB Gain
Response
• +33 dBm OIP3
PLL
HMC820LP6CE [2]
Tri-band PLL + VCO
• Low Phase Noise,
-110 dBc/Hz @ 10 kHz
HMC682LP6CE
Dual Downconverters
1700 - 2200 MHz
CROSSPOINT SWITCH
A/D Converter Applications
HMC890LP5E
HMC589ST89E
HMC891LP5E HBT Gain Block
Band Pass Filter
• DC - 4 GHz
• 200 ns Tuning
• 21 dB Gain
Response
• +33 dBm OIP3
CLK
VOUT
RESETN
CSN
SCLK
SDATA
VIN
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
HMC683LP6CE
Dual Downconverters
700 - 1000 MHz
FPGA
4 Channel, 105 MSPS
14-Bit ADC
RF2
! HMCAD1520
Precision Mode
14-Bit A-to-D Converter
• 105 MSPS
• 4 Channels
NEW
HMC817LP3E [1]
Dual Channel LNA
• 55 - 1200 MHz
• 0.5 dB Noise Figure
HMC624LP4E
6-Bit DATT
• DC - 6.0 GHz
• +55 dBm High IIP3
HMC680LP4E
5-Bit DVGA with Diff. Outputs
• 30 - 400 MHz
• -4 to +19 dB Gain
• +40 dBm OIP3
HMC818LP3E [1]
Dual Channel LNA
• 1700 - 2200 MHz
• 0.5 dB Noise Figure
6
[1] You may choose from a variety of HMC LNAs specific to your application
[2] You may choose from a variety of HMC PLL+VCO combinations specific to your application
June 2011
Visit us at www.hittite.com
Analog-to-Digital Converter Solutions: adc@hittite.com
A/D Converter Applications
Instrumentation
Digital Oscilloscopes Featuring the HMCAD1510 & HMCAD1511
W!
HMC830LP6GE [1] NE
Wideband PLL + VCO
• 180 fs RMS Jitter
• Low Phase Noise,-110 dBc/Hz @ 10 kHz
VOUT
VIN
REF
+5V
!
HMCAD1510 NEW
8-Bit A-to-D Converter
• 125/250/500 MSPS
• Quad/Dual/Single Ch.
PLL
+3V
CLK
HMC860LP3E
High PSRR DC Regulator
• 3.35 V - 5.6 V
!
HMCAD1511 NEW
8-Bit A-to-D Converter
• 250/500/1000 MSPS
• Quad/Dual/Single Ch.
÷
1/2/4/8
Gain Ctrl
PLL
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
SPI
ANALOG MUX
A
B
C
D
A/D Converter Applications
Interleave
FPGA
1/2/4 Channel, 8-Bit ADC
Maximum 1 GSPS
Analog Front End
SNR with Digital Gain Compared
with Traditional Ideal 8-Bit Converter
SIGNAL TO NOISE RATIO (dBFS)
50
45
40
35
8-bit Ideal SNR
30
SNR (dbfs)
25
20
0
11
22
33
44
55
GAIN (dB)
Part Number
Function / Mode
Resolution
(bits)
Sample
Rate
# of
Channels
Power
Dissipation [3][4]
SNR
(dBFS)
HMCAD1511
Single Channel
8
1 GSPS
1
710 mW
49.8
49 / 64
Dual Channel
8
500 MSPS
2
710 mW
49.8
44 / 63
[2]
Quad Channel
8
250 MSPS
4
710 mW
49.8
57 / 70
[2]
Single Channel
8
500 MSPS
1
295 mW
49.8
49 / 65
[2]
Dual Channel
8
250 MSPS
2
295 mW
49.8
59 / 69
[2]
Quad Channel
8
125 MSPS
4
295 mW
49.7
60 / 69
[2]
HMCAD1510
SFDR
(dBc)
[2]
[2] Excluding Interleaving Spurs.
[3] Supply Voltage (Vdd): +1.8 Vdc Analog Supply (AVdd) and +1.8 Vdc Digital Supply (DVdd)
[4] Output Supply Voltage (OVdd): +1.7 to +3.6 Vdc
[1] You may choose from a variety of HMC PLL+VCO combinations specific to your application
Analog-to-Digital Converter Solutions: adc@hittite.com
Visit us at www.hittite.com
June 2011
7
A/D Converter Applications
Instrumentation
Spectrum Analyzers Featuring the HMCAD1520 In Precision Mode
!
W
HMC830LP6GE [1] NE
Wideband PLL + VCO
• 180 fs RMS Jitter
• Low Phase Noise,
-110 dBc/Hz @ 10 kHz
HMC860LP3E
High PSRR DC Regulator
• 3.35 V - 5.6 V
VIN
VOUT
REF
+5V
PLL
+3V
CLK
Gain Ctrl
÷
1/2/4/8
PLL
LVDS
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
SPI
A/D Converter Applications
Interleave
ANALOG MUX
ADC
Power
Divider
HMC680LP4E
5-Bit DVGA
with Differential Outputs
• 30 - 400 MHz
• -4 to +19 dB Gain
• +40 dBm OIP3
FPGA
4 Channel, 105 MSPS
14-Bit ADC
W!
HMCAD1520 NE
Quad Channel Precision Mode
14-Bit A-to-D Converter
• 80 / 105 MSPS
• Integrated Cross Point Switch
(Analog Mux)
[1] You may choose from a variety of HMC PLL+VCO combinations specific to your application
8
June 2011
Visit us at www.hittite.com
Analog-to-Digital Converter Solutions: adc@hittite.com
A/D Converter Applications
Sensing & Control
Medical & Industrial Imaging (Ultrasound) Featuring the HMCAD1100/1101/1102
PLL
HMC860LP3E
High PSRR DC Regulator
• 3.35 V - 5.6 V
!
W
HMC830LP6GE [1] NE
Wideband PLL + VCO
• 180 fs RMS Jitter
• Low Phase Noise,
-110 dBc/Hz @ 10 kHz
Serial Control
Interface
Analog Front-End
Clock
Input
PLL
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
ADC
Digital
Gain
LVDS
Octal Channel
Resolution
(bits)
13 / 12
Sample
Rate
80 MSPS
# of
Channels
8
Power
Dissipation [2][3]
59 mW / Channel
SNR
(dBFS)
70.1
SFDR
(dBc)
77
Octal Channel
13 / 12
65 MSPS
8
51 mW / Channel
72.2
82
HMCAD1100
Octal Channel
13 / 12
50 MSPS
8
41 mW / Channel
[2] Supply Voltage (Vdd): +1.8 Vdc Analog Supply (AVdd) and +1.8 Vdc Digital Supply (DVdd)
[3] Output Supply Voltage (OVdd): +1.7 to +3.6 Vdc
72.2
82
Part Number
Function / Mode
HMCAD1102
HMCAD1101
A/D Converter Applications
+3V
SIGNAL PROCESSING
REF
+5V
CLK
VOUT
RESETN
CSN
SCLK
SDATA
VIN
[1] You may choose from a variety of HMC PLL+VCO combinations specific to your application
Analog-to-Digital Converter Solutions: adc@hittite.com
Visit us at www.hittite.com
June 2011
9
Ultra High Speed A/D Converters
Hittite’s Ultra High Speed GSPS A/D Converters
In addition to the standard product, 3 to 1000 MSPS ADCs, Hittite offers ultra high bandwidth, non-interleaved flash and
folding / interpolating-flash ADCs. These ADCs are capable of operating at sampling rates up to 26 GSPS and leverage
Hittite’s industry-leading track-and-hold design patents and advanced packaging capabilities. Operating over the full
-55 °C to +85 °C temperature range, these ADCs are fully capable of supporting sub-sampling applications into Kuband, and are ideal for wideband receiver systems and test instrumentation applications. Hittite can develop advanced
flash and folding / interpolating-flash architecture ADCs to meet your custom specifications.
Atmospheric LIDAR Featuring the HMC5448 8-Bit, 5 GSPS A/D Converter
HMC874LC3C
20 Gbps Clocked Comparator
• Propagation Delay: 120 ps
• Overdrive & Slewrate
Dispersion: 10 ps
+V HMC690
LASER
+
EW!
HMC953LC4B N
13 Gbps Dual D-Type Flip-Flop
• 22 / 20 ps Rise / Fall Time
• 2.0 ps Deterministic Jitter
TIA
CH-1
0V
HMC690
10 Gbps TIA
• 1.25 kΩ Transimpedance
• 3 mApp Input Overload
• <10 ps Deterministic Jitter
• 11 pA / √ Hz Noise
D
Q
CLK
Q
D
Q
CLK
Q
T/H IN
2
CLKIN
2
+
HMC690
HMC874LC3C
+
ADC
+
ADC
CLKIN
TIA
+
(OPTIONAL)
0V
REF2
HMC874LC3C
TIA
CH-n
HMC690
12.5 to
13.9 GHz
1:4
DEMUX
D
Q
CLK
Q
D
Q
CLK
Q
CLK
OUT
+
CH-2
REF.
T/H
REF1
HMC5448
+
PLL
W!
HMC5448 NE
8-Bit, 5 GSPS ADC
• >6 GHz Input Bandwidth
• Supports Sub-Sampling into X-Band
PROCESSOR
ultra high speed A/D Converters
LASER
BACK SCATTER
ADC
CLKIN
REFN
HMC5448
D1
CLK
INPUT
HMC953LC4B
D2
ADC
CLKIN
6.5 GHz
HMC700LP4E [1]
Fractional-N PLL
• 1 MHz to 8 GHz
• Low Phase Noise:
-108 dBc @ 6 GHz
• -227 FOM Integer Mode
DIN
D3
RFOUT2
HMC584LP5E [1]
VCO with Fo/2 & ÷4
• 12.5 - 13.9 GHz
• -110 dBc/Hz SSB
Phase Noise @ 100 kHz
D4
ADDITIONAL
OUTPUT
!
NEW
HMC940LC4B
13 Gbps 1:4 Fanout Buffer
• 26 / 25 ps Rise / Fall Time
• 101 ps Propagation Delay
Please Contact: adc@hittite.com for Information on the HMC5448 Ultra High Speed ADC
[1] You may choose from a variety of HMC PLL+VCO combinations specific to your application
10
June 2011
Visit us at www.hittite.com
Analog-to-Digital Converter Solutions: adc@hittite.com
Ultra High Speed A/D Converters
AN
TE
N
N
A
Radio Astronomy Featuring The HMC5831 3-Bit, 26 GSPS A/D Converter
!
NEW
HMC972LP5E
Analog VGA
• 0.5 - 6.0 GHz
• -35 to +15 dB Gain Control
• +28 dBm OIP3
CRYOGENIC
RECEIVER
1 - 4 GHz
HMC577LP3E
SPDT Switch
• DC - 20 GHz
• > 45 dBm Isolation
Narrow Band
Channel
1 - 20 GHz
!
NEW
HMC5831
3-Bit, 20 GSPS ADC
• 10 GHz Full Bandwidth
• 20 GHz / 10 GSPS
Clock / Data Rate
• 256 mVp-p Single-Ended RF Input Level
10 GSPS
ADC
FPGA
10 GSPS
HMC465LP5E
Wideband Driver
• DC - 20 GHz
• 15 dB Gain
• +24 dBm Saturated
Output Power
~250 MHz
HMC749LC3C
26 GHz T Flip-Flop
• 18 / 17 ps Rise / Fall Time
• 2 ps Deterministic Jitter
• 0.6 to 1.2 Vp-p Differential
Output Voltage Swing
HMC941
5-Bit DATT Chip
• 1 - 30 GHz
• 15.5 dB Step Atten. (0.5 dB)
TFF Q
2 GHz
CLOCK
÷8
!
HMC859LC3 NEW
Clock Divide-by-8
• Up to 26 GHz Clock Rate
• 19 / 17 ps Fast Rise / Fall Times
• 146 ps Propagation Delay
4 GHz
VOUT
REF
4 GHz
CLK
+3V
PLL
2:1
+5V
HMC860LP3E
High PSRR DC Regulator
• 3.35 V - 5.6 V
HMC837LP6GE
PLL + VCO
• 1.025 - 4.6 GHz
• Tri-Band Output
• Low Phase Noise,
-111 dBc/Hz @ 10 kHz
20 GHz
CLK
x2
HMC530LP5E
VCO with Fo/2 & Fo/4 Output
• 9.5 - 10.8 GHz Fo
• Low Phase Noise
-110 dBc/Hz @ 100 kHz
• +11 dBm Pout
10 GHz
SELECTOR
VIN
HMC858LC4B
14 Gbps 2:1 Diff. Selector
• 19 / 20 ps Rise / Fall Time
• Propagation Delay: 87 ps
• 0.5 to 1.3 Vp-p Differential
Output Voltage Swing
HMC576LC3B
x2 Active Multiplier
• 18 - 29 GHz Fout
• +15 dBm Output
PLL
HMC703LP4E
Fractional-N PLL + Sweeper
• DC to 8 GHz
• Low Phase Noise: -112 dBc
• -233 FOM Integer Mode
ultra high speed A/D Converters
Wideband
Channel
Please Contact: adc@hittite.com for Information on the HMC5831 Ultra High Speed ADC
Analog-to-Digital Converter Solutions: adc@hittite.com
Visit us at www.hittite.com
June 2011
11
Connecting Our World Through Integrated Solutions
Sales Contact Information:
Hittite Microwave Worldwide Sales Offices
Americas
Europe, Middle East & Africa
Hittite Microwave Corporation
USA Corporate Headquarters
Phone: 978-250-3343
Fax: 978-250-3373
sales@hittite.com
United Kingdom, Ireland, Spain,
Portugal, Greece & Turkey
Hittite Microwave Europe Limited
Phone: +44-7811-267418
Fax: +978-250-3373
europe@hittite.com
Eastern (North) - North America
Boston, MA
Phone: 978-270-3167
usa-east-north@hittite.com
Eastern (South) - North America
Philadelphia, PA
Phone: 978-337-1226
usa-east-south@hittite.com
Central (North) - North America
Chicago, IL
Phone: 312-485-8730
usa-north@hittite.com
France, Italy & Benelux
Hittite Microwave Europe Limited
Phone: +44-7811-267418
Fax: +978-250-3373
europe@hittite.com
Northern Europe
Hittite Microwave Nordic AB
Phone: +46-761-763969
Fax: +978-250-3373
nordic@hittite.com
Finland Office
Phone: +46-761-763969
Fax: +46-8-752-9900
finland@hittite.com
Central (South) - North America
Dallas, TX
Phone: 817-727-7146
usa-south@hittite.com
Central & Eastern Europe
Hittite Microwave Deutschland GmbH
Phone: +49-8031-97654
Fax: +49-8031-98883
germany@hittite.com
Western - North America
San Diego, CA
Phone: 978-250-3343
usa-west@hittite.com
Middle East & Africa
Hittite Microwave Europe Limited
Phone: +44-7811-267418
Fax: +978-250-3373
mea@hittite.com
Republic of Korea
Hittite Microwave Asia Co., Limited
Phone: +82-2559-0638
Fax: +82-2559-0639
korea@hittite.com
Russia & Ukraine
Hittite Microwave Europe Limited
Phone: +44-7811-267418
Fax: +978-250-3373
russia@hittite.com
ukraine@hittite.com
Peoples Republic of China
Hittite Microwave Co., Limited
Shanghai Office
Phone: +86-21-6209-8809
Fax: +86-21-6209-6730
china@hittite.com
Asia & Pacific
Australia & New Zealand
Hittite Microwave Corporation
Phone: 978-250-3343
Fax: 978-250-3373
ausnz@hittite.com
India
Hittite Microwave India
Phone: +91-9849134642
Fax: +978-250-3373
india@hittite.com
Mexico, Central & South America
Dallas, TX
Phone: 978-250-3343 x1250
southamerica@hittite.com
Shenzhen Office
Phone: +86-755-3322-2116
Fax: +86-755-3322-2117
shenzhen@hittite.com
Beijing Office
Phone: +86-10-6485 9219
Fax: +86-10-6485 0377
beijing@hittite.com
Xi’an Office
xi’an@hittite.com
Japan
Hittite KK
Phone: +81-3-5652-5772
Fax: +81-3-5652-6694
japan@hittite.com
Please Contact adc@hittite.com For All Standard & Custom ADC Product Solutions!
Order On-line at: www.hittite.com
© 2011, Hittite Microwave Corporation, All Rights Reserved.
2 Elizabeth Drive • Chelmsford, MA 01824 • 978-250-3343 tel • 978-250-3373 fax
Boston • Hyderabad • London • Munich • Seoul • Shanghai • Stockholm • Tokyo
