Class 1 Division 2 Z-Purged
Workstations
The C1D2 Z-Purge workstation is designed
for areas where this classification usually
includes locations where volatile flammable
liquids or flammable gases or vapors are used,
but which would become hazardous only in
case of an accident or of some unusual
operating condition.
Rather than only having the purge device
certified, our entire workstation has been
tested and certified by Intertek, an
NRTL, to meet UL standard NFPA496
for Class 1 Division 2 hazardous
locations.
Key Benefits:









Better ROI
Lower cost of ownership
Not limited to specific components
Added safety
Available alerts
More configuration options
Longer useful life
More flexible maintenance options
Seamless cabinet/KB enclosure
678-590-1634
www.swiftprotech.com
sales@swiftprotech.com
Z-Purge Device Specifications
Specifications
Z-Purge
Enclosure Volume
90ft. (2.54m)
Supply Pressure Range
80 - 120 psi (5.5 - 8.3 bar)
Exchange Pressure
3" - 5" (76.2 mm - 127 mm)
Exchange Flow Rate
12 SCFM /720 SCFH (340 l /m / 20390 l /hr)
Safe Pressure Setpoint
0.25" (6.35mm)
Safe Pressure Flow Rate
0.1 - 3.5 SCFH (2.8 - 99 l/hr)
Capacity & Filtration
1.5 oz @ 20 Micron
Supply Requirements
clean air or inert gas
Certifications LPS
WPS
WPSA
UL & FM Certified: Class 1 Div. 2 Group A-D
ATEX 'nP' Certified: Zone 2 Group IIC
UL & FM Certified: Cl. I, Div. 2, Group C-D
UL & FM Certified: Cl. I, Div. 2, Group A-D
ATEX 'nP' Certified: Zone 2, Group IIB+H2
Rating Reduction
(LPS) Rating Reduction: Div.2 to Nonhazardous; Zone 2 to
Nonhazardous
(WPS) Div.2 to Nonhazardous
(WPSA) Div.2 to Nonhazardous; Zone 2 to Nonhazardous
Temperature Range
-20 °F to +120 °F (-29ºC to +49ºC)
Switch Contact Rating
WPS Style:120 VAC@ 15 A
WPSA Style:120/220 VAC, 24 VDC @ 10 A; 125 VDC @ 50 mA
Weight
15 lbs (6.8 KG)
Safety Integrity Level
IEC 61508, SIL2
678-590-1634
www.swiftprotech.com
sales@swiftprotech.com