GLIDEG9C
T5, T5HO and T8
Direct/ Indirect luminaire with Center Curved Baffle
STANDARD LIGHT DISTRIBUTION
Direct 30%; Indirect 70%
Project Name
Date
Catalog Number
Type
CONSTRUCTION One piece die-formed steel housing in a 8-3/4” by 2-1/2” profile. Standard 4’-0” and 8’-0” fixtures
can be joined to create continuous runs.
REFLECTOR Standard high reflectance die-formed white painted aluminum. Optional light control options provide
flexibility in direct/indirect light output.
ENDCAPS Precision die-cast sculpted endcaps are fastened with concealed hardware.
BAFFLE White painted die-formed aluminum baffle. Bottom width opening 3-15/16”, blade height 3/4” and spaced
1” on center.
ELECTRICAL T5, T5HO: Program start 120/277 volt integral electronic ballast with less than 10% THD. T8: Instant
start 120/277 volt electronic ballast with less than 10% THD. Through wiring with quick connects standard. Standard
single circuit. Each ballast provided with disconnects to meet luminaire disconnect code requirement.
MOUNTING Adjustable aircraft cable mounts on 4’-0” and 8’-0” centers. Aircraft Cable supplied with 5” power and
2” non-power canopies. Refer to installation instructions for appropriate ceiling detail. Canopies and power cords are
painted white unless otherwise specified.
FINISH Standard powder-coat white painted finish. Consult factory for custom color and finish options.
LABELS UL and cUL Listed and approved for dry/damp location.
T8 Cross Section
T5 Cross Section
2-1/2"
2-1/2"
8-3/4"
8-3/4"
Lamp Options
YEAR
WARRANTY
LFL
Convertible
LED
G9C_-
_T___-
___’-
______-
HOUSING
LAMPS
LENGTH
MOUNTING
G9CB-Glide
Direct/Indirect
indoor luminaire
with painted
curved perforated baffle
1T5- (1) 28W T5
2T5- (2) 28W T5
3T5- (3) 28W T5
1T5HO- (1) 54W T5HO
2T5HO- (2) 54W T5HO
3T5HO- (3) 54W T5HO
1T8- (1) 32W T8
2T8- (2) 32W T8
3T8- (3) 32W T8
2T5, 2T8
3T5, 3T8
Sample Catalog #: G9C-3T8-32’-AC48G1-120-1C-W
L U M I N A I R E S P E C I F I C AT I O N
G9C-Glide
Direct/Indirect
indoor luminaire
with painted
curved baffle
1T5, 1T8
LED
Convertible
Adjustable Aircraft Cable1,2
AC48G1- 1” T-Bar
AC48G9- 9/16” T-Bar
AC48GS- Slotted T-Bar
AC48JB- Junction Box
AC48ST- Structure
AC548G_- 5” Non-Power Canopy3
YEAR
AC548JB- 5” Non-Power Canopy3
WARRANTY
SQ48G_- 5” Square Canopy3
SQ48JB- 5” Square Canopy3
LFL
Convertible
Individual Units
4- 4’
8- 8’
Continuous Runs
xx’- Specify nominal
overall row length in
4’ increments
LED
LED
Convertible
LFL
LFL
___-
__-
VOLTAGE
120277347UNV-
CIRCUITING
__
FINISH
OPTIONS
YEAR
WARRANTY
YEAR
WARRANTY
120 V
LFL
277 V Convertible
4
LED
347 V
UNV4
__-
W- Matte White
LED
LFL
CC- Custom
Color
Convertible
Convertible
(120/277)
1C- Single Circuit
2C- Dual Circuit5,6
1D- Single Circuit
Dimming5
2D- Dual Circuit
Dimming5,6
1E- Single Circuit with
Emergency Circuit5
2E- Dual Circuit with
Emergency Circuit5,6
1B- Single Circuit with
Battery Pack5
2B- Dual Circuit with
Battery Pack5,6
LED
LFL
LED
Convertible
LFL
DL100- 100% Direct
DL90- 90% Direct/10% Indirect
DL80- 80% Direct/20% Indirect
DL60- 60% Direct/40% Indirect
DSM- Daylight Sensor Master
(sensor included)7
DSS- Daylight Sensor Satellite
(sensor not included)7
MSDG-
Motion Sensor
Dust Guard
(Covers top of luminaire)
LOLB1
LB2QSLCRCLCXCT-
Lens Overlay
2 Lamps Up/1 Down8
2 Lamps Down/1 Up8
Quick Ship9
Low Ceiling Reflector
(1T5, 1T5HO lamp only)
90 Degree Corner
X Connector
T Connector
2Consult factory for tegular edged tiles. 3Replaces standard 2” non-power canopy. Square canopy replaces standard round. Must
specify grid ceiling type on AC548G_ and SQ48G_. Select from G1 (1” grid), G9 (9/16” grid), or GS (slotted); for example AC548G1. 4347 volt and UNV not available with battery packs. 5Some Glide
configurations will not accommodate all electrical options. Consult factory. 62 lamps switched side-by-side, 3 lamps switched inboard/outboard. 7See back page for ordering information. Requires 0-10
volt dimming. 8See back page for details 9Includes Universal voltage, standard white, single (1C) and dual circuit (2C).
1Standard 48” Adjustable Cable. Consult factory for additional lengths.
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
80239 Phone 303.322.5570 Fax 303.322.5568
www.pinnacle-ltg.com
© 2012 Pinnacle Architectural Lighting ® April 2012
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
1.60"
48.0"1
1Endcaps
P 4'
HOTOMETRICS
96.0"1
8'
Test #: 203498
Part #: G9C-1T5HO
1
Total 144.0"
Luminaire
Efficiency: 92.2%
Direct: 30%; Indirect: 70%
772
579
12'
10.40"
386
12.0"
Must add 3” for each endcap or 6”
to the overall length of the row.
1.60"
1.60"
12.0"
GLIDE G9C / T5, T5HO, T8
Test #: 203505
Part #: G9A-2T5HO
Total Luminaire Efficiency: 89.5%
870
Direct: 30%; Indirect: 70%
CT = T Connector
435 CL = 90 Degree Corner
1740
1305
193
INDIVIDUAL LUMINAIRES
CX = X Connector
CORNERS
3.0"
1.60"
1.60"
1.60"
10.40"
1
12.0"
48.0"
12.0"sensor location
Indicates1Endcaps
sensor location
Indicates
Example 1
Example 1
4DSM
4DSM
4’
4’or 6”
Must
add
3”
for
each
endcap
4'
4’ individual fixture with a Daylight Sensor. Specify: G9B-2T5-4’-AC48G1-120-1C-W-4DSM
to the overall length of the row. 4’ individual fixture with a Daylight Sensor. Specify: G9R-2T5-4’-AC48G1-120-1C-W-4DSM
Example 2
96.0"1
8DSS
8’
8’ individual fixture wired to a DSM fixture. Specify: G9B-2T5-8’-AC48G1-120-1C-W-8DSS
Example 2
8DSS
8’
8’ individual fixture wired to a DSM fixture. Specify: G9R-2T5-8’-AC48G1-120-1C-W-8DSS
Example 3
8DSS
8DSM
16’
8’ fixture with a Daylight Sensor and 8’ fixture wired to DSM fixture
Specify: G9B-2T5-16’-AC48G1-120-1C-W-8DSM+8DSS
Example 3
CL =8DSM
90 Degree Corner
CT = T Connector
8DSS
16’
8’ fixture with a Daylight Sensor and 8’ fixture wired to DSM fixture
Specify: G9R-2T5-16’-AC48G1-120-1C-W-8DSM+8DSS
Example 4
LAMP 8DSM
BARRIERS
82C
16’
8’ fixture APPLICATION:
with a Daylight Sensor
+ 8’barriers
fixture wired
as standard
dual circuit
(not wiredTypically
to the sensor)
Lamp
isolate
each lamp’s
light source.
utilized in
Specify: conjunction
G9B-2T5-16’-AC48G1-120-2C-W-8DSM+82C
with dual circuiting, lamp barriers are the perfect solution for training
Example 4
LOW CEILING
82C
8DSM REFLECTOR
16’
8’ fixture with a Daylight Sensor + 8’ fixture wired as standard dual circuit (not wired to the sensor)
APPLICATION:
Glide’s low ceiling
Specify:
G9R-2T5-16’-AC48G1-120-2C-W-8DSM+82C
8'
Example 5 and conference rooms, lecture halls and classrooms with multiple lighting requirements.
3.0"
81C
12DSM
20’
12’ fixture with a Daylight Sensor + 8’ fixture wired as standard single circuit (not wired to the sensor)
LB1
3
Lamp
Option
LB2 - 13 Lamp Option
Specify: G9B-2T5-20’-AC48G1-120-1C-W-12DSM+81C
48.0"1
Endcaps
2 lamps Up/1 lamp Down
CX = X Connector
reflector eliminates hot spots while
Example 5
increasing uniformity across the
81C
12DSM
20’
ceiling. Utilize when fixtures must
12’ fixture with a Daylight Sensor + 8’ fixture wired as standard single circuit (not wired to the sensor)
be
installed
as
close
as
10”
from
the
Specify: G9R-2T5-20’-AC48G1-120-1C-W-12DSM+81C
1.60"
1.60"
1.60"
ceiling. Available on 1T5 and 1T5HO
2 lamps Down/1 lamp Up
Must add 3” for each endcap or 6” fixtures 10.40"
only.
12.0"
12.0"
to the overall length of the row.
Indicates sensor location
CONSTRUCTION: Highly reflective white painted aluminum. Low Ceiling Reflector
securely snaps onto top of the lamp.
Outside Lamps: 100% Direct;
4'
Example 1
96.0"1
4DSM
4’
Outside
100%
Indirect;
4’ individual
withLamps:
a Daylight
Sensor.
Specify: G9W-2T5-4’-AC48G1-120-1C-W-4DSM
8'fixture
Inside Lamp: 100% Direct
Inside Lamp: 100% Indirect
Example 2
144.0"1
8DSS
8’
CONSTRUCTION: Highly reflective white painted aluminum. Lamp Barrier easily
8’ individual fixture wired to a DSM fixture. Specify: G9W-2T5-8’-AC48G1-120-1C-W-8DSS
ORDERING INFORMATION: Specify “LCR” in the options section of the part
number. (Sample Catalog #: G9C-1T5-32’AC48G1-120-1C-W-LCR)
fits
down over the top of the lamps.
12'
CL = 90 Degree Corner
CT = T Connector
CX = X Connector
Example 3
ORDERING INFORMATION: Specify Lamp Barriers in the options section of the
8DSS
8DSM
16’
part number. (Sample Catalog #: G9C-3T5-32’AC48G1-120-1C-W-LB2)
8’ fixture with a Daylight Sensor and 8’ fixture wired to DSM fixture
Specify: G9W-2T5-16’-AC48G1-120-1C-W-8DSM+8DSS
ORDERING INFORMATION: Specify row layout in the Options section of the part
DAYLIGHT SENSOR
number when ordering Remote Daylight Sensor. Remote Daylight Sensor Master (DSM)
Example 4
Glide Side Baffle shown
includes the fixture with remote sensor and dimming ballast. Controls DSS units. Remote
82C
8DSM
16’
3.0"
APPLICATION:
sensors
Daylight Sensor Satellite (DSS) includes the fixture with a sensor compatible dimming
8’ fixture with a Daylight Sensor + 8’ fixture wired as standard
dual circuit (notDaylight
wired to the
sensor)
48.0"1
are an ideal solution
for saving
Specify: G9W-2T5-16’-AC48G1-120-2C-W-8DSM+82C
ballast only. Must be used in conjunction
See example 4 for information
1.60"
1.60" with a DSM unit.1.60"
1
Endcaps
energy , creating smart
environments
on ordering rows with both standard circuiting and daylight sensor.
Example 5
10.40"
MustPinnacle
add 3” for
each endcap or 6”
12.0"
and aiding sustainability.
Light12.0" sensor location
4'
Indicates
81C
12DSM
Example
1
20’
to
the
overall
length
of
the
row.
ing’sasdaylight
is a turn
solution
12’ fixture with a Daylight Sensor + 8’ fixture wired
standardsensor
single circuit
(notkey
wired
to the sensor)
4DSM
4’
for lighting
control. The sensor is easily wired
Specify: G9W-2T5-20’-AC48G1-120-1C-W-12DSM+81C
4’ individual fixture with a Daylight Sensor. Specify: G9C-2T5-4’-AC48G1-120-1C-W-4DSM
96.0"1
to the 0-10 volt dimming ballast installed in the
Indicates sensor location
fixture.
Example 1 8'
DAYLIGHT SENSOR: Daylight sensor dims lights based on electric light and
4DSM
4’
presence
of daylight.
control
up to 20 dimming ballasts. Sensor
4’ individual
fixture with
a Daylight Sensor
Sensor. can
Specify:
G9A-2T5-4’-AC48G1-120-1C-W-4DSM
is factory calibrated to 45 footcandles (fc), adjustable by 1/3 to 3 times the
Example 2
default setting by rotating the aperture.
8DSS
8’
STANDARD
PLACEMENT:
The sensor location in Glide fixtures
8’ individual
fixture wiredSENSOR
to a DSM fixture.
Specify: G9A-2T5-8’-AC48G1-120-1C-W-8DSS
allows for easy placement of the sensor in relation to the space being day-
Example 3
lighted. Housings can be rotated for more flexibility.
8DSS
8DSM
16’
8’ fixture with a Daylight Sensor and 8’ fixture wired toIndicates
DSM fixturesensor location
4’
Specify: G9A-2T5-16’-AC48G1-120-1C-W-8DSM+8DSS
Example 4 8’
82C
8DSM
16’
8’ fixture12’
with a Daylight Sensor + 8’ fixture wired as standard dual circuit (not wired to the sensor)
Specify: G9A-2T5-16’-AC48G1-120-2C-W-8DSM+82C
®
Example 2
8DSS
8’
8’ individual fixture wired to a DSM fixture. Specify: G9C-2T5-8’-AC48G1-120-1C-W-8DSS
Example 3
8DSS
CL =8DSM
90 Degree Corner
CT = T Connector
16’
8’ fixture with a Daylight Sensor and 8’ fixture wired to DSM fixture
Specify: G9C-2T5-16’-AC48G1-120-1C-W-8DSM+8DSS
CX = X Connector
Example 4
82C
8DSM
16’
8’ fixture with a Daylight Sensor + 8’ fixture wired as standard dual circuit (not wired to the sensor)
Specify: G9C-2T5-16’-AC48G1-120-2C-W-8DSM+82C
Example 5
81C
12DSM
20’
12’ fixture with a Daylight Sensor + 8’ fixture wired as standard single circuit (not wired to the sensor)
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
Specify: G9C-2T5-20’-AC48G1-120-1C-W-12DSM+81C
80239
Phone 303.322.5570
Fax 303.322.5568
www.pinnacle-ltg.com
© 2012 Pinnacle Architectural Lighting ® April 2012
Indicates sensor location
4’
Specifications
and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
8’