CANTO 450
Specification
CANTO's smooth lines blend harmoniously with a variety
of architecture. The dome shaped housing of heavy cast
aluminum is available in two sizes to satisfy a variety of
building scale requirements. Frameless tempered glass lens
has single quarter-turn fastener for tool-less relamping.
Hinged reflector assembly allows access to the ballast tray.
Mounting bracket and straight round steel pole with flush
handhole are hot-dip galvanized prior to being finished
in high quality, finely textured paint. Base cover is spun
aluminum. All hardware is stainless steel. Standard colors;
matte silver grey metallic or graphite grey. Special colors
available.
Model
Watt
CC450
150
Lamp
MH - Metal
Halide
Volt
Mounting
A - Single
2 - 120 Mount
Pole
16RS - 16' Round
Straight
7 - 277 B - Twin Mount X - Other (specify)
Finish
Option
0DEG - 0 degree tilt for full cutoff
SG - Silver Grey classification
GG - Graphite
Grey
N - None
CC - Custom
Color
Ordering Information
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Pole Mounted Luminaire > CANTO
http://www.hessamerica.com/Products/Lighting/Pole_Mounted_Luminaire/CANTO/
Page 1
CANTO 450
Specification
HOUSING
One-piece domed housing is heavy cast aluminum. Hinged frameless tempered glass lens opens with single quarter-turn
fastener for easy relamping. Lens is sealed to the housing with one-piece closed cell silicone gasketing. Hinged reflector plate,
painted with high reflectance white paint, swings down allowing access to ballast components. Housing is fitted with stainless
steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire installs onto bracket
mounting plate with four socket head cap screws. All hardware is stainless steel.
OPTICS
Horizontal lamp is positioned within the formed aluminum reflector consisting of semi-specular and hammertone anodized
aluminum sheet, laser cut for precise reproduction. Flat tempered glass lens is screen-printed with border around reflector
opening.
ELECTRICAL
Metal halide core and coil ballast with class ''H'' (180°C) insulation system shall have a minimum high power factor rating
of 90% and nominal ballast factor of 1.0. Ballast shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage
of ±10%. Ballast, capacitor, and starter (where applicable) are UL and CSA recognized. Medium base porcelain socket is
660w-600v, 4kV pulse rated.
LAMPING
150w ceramic metal halide, MHC150/U/M, ED-17 medium base
POLE
Fabricated aluminum bracket arm bolts to the pole 1.9' from the top with stainless steel fasteners. Square tubing welded to the
underside of the bracket arm acts as a wire way for the luminaire power cable. Round and curved steel pole is manufactured
from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.157''. Flush
mounted handhole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device.
Pole and luminaire mounting bracket are hot-dip galvanized with coating inside and out, then lightly sanded prior to painting.
Two-piece base cover with tamper-proof fasteners is fabricated from 0.080'' spun aluminum and finished to match the pole.
Nominal pole height is 16'.
FINISH
Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey.
Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer's limited warranty.
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Pole Mounted Luminaire > CANTO
http://www.hessamerica.com/Products/Lighting/Pole_Mounted_Luminaire/CANTO/
Page 2
Additional information
Dimensions
Mounting Detail
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Pole Mounted Luminaire > CANTO
http://www.hessamerica.com/Products/Lighting/Pole_Mounted_Luminaire/CANTO/
Page 3