Automation Products
Variable Frequency Drives
Soft Starters
Panels
Industrial Control Products
This catalog will be periodically updated with new and updated pages. The
current version and update packages can be found on our website
www.pamensky.com or can be requested from V.J. Pamensky Canada Inc.
1 877 PAMENSKY.
PAMENSKY
101
TERMS AND CONDITIONS OF SALE V.J. PAMENSKY CANADA INC.
1. EXCLUSIVE CONDITIONS OF SALE: This Quotation or Order is subject to terms and conditions contained here-in and supersedes
Buyer’s Specification and/or Purchase Order. Seller will recognize no modifications or additions to these conditionsunless specifically
agreed to in writing by Seller. Failure of Seller to object to provisions contained in the Purchaser’s Order or any other communication
from Buyer shall not be construed as a waiver of these conditions or an acceptance of any such provisions. If Buyer places an Order
with Seller based on Seller’s Quotation, whether the Order is placed in writing or orally, then the Quotation (including Seller’s terms and
conditions) and the Seller’s acceptance of the Order will constitute the entire contract between Buyer and Seller with respect to the
subject matter thereof notwithstanding any terms and conditions inconsistent with these terms and conditions on any of Buyer’s forms
or correspondence. All orders, sales contracts and other documentation between Buyer and Seller shall become effective only when
approved and accepted by the Seller.
2. PRICES: Prices quoted herein are based upon presently prevailing duties, rates of duties, taxes, special assessments, monetary
exchange and freight as applied to materials and/or equipment purchased or imported by Seller. Seller reserves the right to amend the
price(s) in this quotation where variations in regulated costs such as rate of duties, taxes, special assessments, monetaryexchange and
freight between the date of quotation and date of delivery are deemed significant by the Seller.
3. TERMS OF PAYMENT: The standard terms of payment are Net-30 Days from date of invoice, with a service and interest charge of
1-1/2% per month (18% per annum) on past due invoices applying. If Buyer defaults in any payment when due or refuses to accept
delivery or becomes insolvent, the Seller at its option, without prejudice to other lawful remedies, may defer deliveries or cancel the remainder of the order. Equipment held for Buyer shall be at the risk and expense of Buyer and payment shall become due from the date
of which Seller is prepared to make shipment. Printed terms on face of our Quotation will take precedence.
4. TITLE: Title to the goods covered by this Quotation and the right to immediate possession thereof shall remain with the Seller until the
purchase price is paid in full and Buyer hereby grants to Seller a security interest in the equipment (and all proceeds thereof) to secure
the Buyer’s obligation to pay for the equipment.
5. CERTIFICATIONS AND TAXES: Prices do not include sales, use or other similar federal, state or local taxes. Any certification for
special duty or tax rate must be supplied at time of order. A service charge will be applied on any credit notes necessitated by the Buyer
not providing proper certification at time of order. Exception from taxes extended to the buyer does not prejudice our right to charge
the buyer with taxes plus any penalties assessed at any subsequent date should the taxing authorities determinethat the equipment is
taxable.
6. PENALTIES AND DELAYS: No penalty clause of any kind, in any specification of order will be effective unless specifically approved
in writing by Seller. Seller shall not be liable for any damage, expenses or consequential damages caused by delays beyond Seller’s
control including without limiting the generality of the foregoing; fire, strike, act of the Buyer, restriction by civil or military authority, Act
of God, transportation failures or inability to obtain labor, materials or manufacturing facilities. In the event of any such delay, the date of
delivery shall be extended for a period equal to the time lost by reason of the delay.
7. CANCELLATION: Orders once accepted are not subject to cancellation unless on terms that will indemnify Seller against loss and/or
expenses incurred.
8. SHIPMENT: Unless otherwise specified in writing, all shipments are EX-WORKS (Incoterms 2000) Seller’s shop, in which case Seller
is not responsible for damage, apparent or concealed, or loss in transit and all claims on “collect” shipments must be made by Buyer
direct to the carrier. Seller will assist insofar as practical in securing satisfactory adjustment to reasonable claims.
9. ACCEPTANCE, INSPECTION: By virtue of Buyer issuing an order for equipment in accordance with this Quotation, he also accepts
Seller’s Terms and Conditions as part of the order. Buyer shall inspect the goods immediately upon the receipt thereof. All claims by
Buyer (including claims for shortages), except only those provided for under the WARRANTY clauses below, must be asserted in writing
by Buyer within a 10 day period or they are waived. If this contract involves partial performances, all such claims must be asserted
within a 10-day period for each partial performance.
10. WARRANTY: Seller warrants to the Buyer that its products are free from defects in workmanship and materials when operated under normal conditions and in accordance with nameplate characteristic limits. This warranty will be in effect for the following time period
and for the following products:
Low voltage standard efficiency motors NEMA & IEC frames are warranted for a period of 12 months from date of installation, but not
more than 18 months from date of manufacture.
EPACT & NEMA Premium Efficiency motors both NEMA & IEC frames are warranted for a period of 24 months from date of installation
but for not more than 30 months from date of manufacture.
IEEE841 motors are warranted for a period of 60 months from date of installation but for not more than 66 months from date of manufacture.
Machines & Generators are warranted for a period of 12 months from date of installation, but not more than 18 months from date of
manufacture. These products include but are not limited to; Above NEMA size Motors: low voltage, medium voltage and high voltage,
DC motors, Turbo Generators, Hydro Generators, Synchronous Motors, and Wound Rotor Motors.
Automation products (variable frequency drives and soft starters) and Electrical components are warranted for a period of 12months
from date of installation, but not more than 18 months from date of manufacture. If any defects are claimed by the Buyer during the
101
warranty period, Seller’s sole obligation shall be limited to alteration, repair or replacement at Seller’s expense, EX-WORKS (Incoterms
2000) Seller’s shop, on parts or equipment which upon return to Buyer and upon Buyer’s examination prove to be defective.
UNLESS OTHERWISE SPECIFIED IN WRITING HEREIN, THERE ARE NO REPRESENTATION, WARRANTIES OR CONDITIONS,
EXPRESSED OR IMPLIED STATUTORY OR OTHERWISE, EXCEPT FOR THE FOREGOING AND WITHOUT LIMITING THE GENERALITY OF THE ABOVE, THERE ARE NO EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES CONCERNING THE QUALITY
OF THE EQUIPMENT OR THAT ANY SUCH EQUIPMENT WILL BE FIT FOR ANY PARTICULAR PURPOSE OF THE PURCHASER. THE
SELLER SHALL HAVE NO OBLIGATION TO REPAIR OR REPLACE SUCH PRODUCTS OR PARTS UNLESS IT RECEIVES AT ITS OFFICES IN CANADA WRITTEN NOTICE OF SUCH DEFECT WITHIN THE ABOVE-MENTIONED WARRANTY PERIOD.
This warranty does not cover the cost of transportation, labor, removal, installation, or re-testing of the new or repaired goods or parts,
or any other direct or incidental expenses incurred in shipping the product to or from Seller. Replacement goods or parts are warranted for the remainder of the warranty period applicable to the goods originally supplied by the seller. No warranty shall apply to any
equipment upon which repairs or alterations have been made unless authorized by Seller, nor to equipment which hasbeen subjected to
misuse, negligence or mishandling.
11. DAMAGES: Subject to the balance of the provisions of this clause, Seller shall only be liable for the cost of replacement of any defective Equipment provided hereunder. Seller shall not be liable to the Buyer in any circumstances for any incidental, special, consequential or indirect damages, including but not limited to loss of profits or revenue, loss of use of equipment and facilities, and claims by or
payments to customers, suppliers or other parties who have a relationship with the Buyer. This disclaimer applies to consequential damages based upon any cause of action whatever asserted against Seller including causes of action arising out ofany breach of warranty,
express or implied, guarantee, product liability, negligence, tort, or any other cause pertaining to the performance or non-performance
of this Quotation or contract by Seller and the Buyer hereby waives any right to claim punitive,aggravated or exemplary damages with
respect to a breach of this Quotation or the performance or non-performance of the Equipment, and whether such claim is founded in
contract, tort or otherwise. Seller shall not be responsible for losses or damages arising out of the negligence of the Buyer, its’ employees, agents or third party contractors. In no event will Sellers maximumliability to the Purchaser in connection with the Equipment, including without limitation resulting from breach of contract or any other performance or non-performance of this Quotation or contract,
exceed the amount of the purchase price paid to Seller hereunder.
12. RETURNING EQUIPMENT: No equipment is to be returned without first obtaining from Seller shipping instructions and a return
material identification number and agreement in writing as to terms. Returned equipment, which Seller elects to accept for credit is subject to reasonable handling and restocking charge commensurate with the policy of the manufacturer plus all charges incurred by Seller.
Seller is not responsible for equipment that is returned without complying with the foregoing. Equipment isreturned at the expense and
risk of the Buyer. Returned equipment must be in the original packaging and unused.
13. PRIVILEGE AND LIEN RIGHTS: Seller retains all lien rights with regard to the equipment in accordance with any Builder’s Lien Act,
Mechanic’s Lien Act, Builder and Works Act or other legislation passed pursuant to or in replacement thereof.
14. BACK CHARGES: Seller will accept no back charges for any reason without Seller’s written permission to incur such back charges.
15. TECHNICAL ADVICE: Any technical advice furnished or recommendation made by Seller or any representative of Seller concerning
any use or application of any of the goods is believed to be reliable, but SELLER MAKES NO WARRANTY, EXPRESSED OR IMPLIED,
ON RESULTS TO BE OBTAINED. BUYER ASSUMES ALL RESPONSIBILITY FOR LOSS OR DAMAGE RESULTING FROM THE HANDLING OR USE OF ANY OF THE GOODS.
16. INVALIDITY: If any provision of this contract shall be found to be invalid or illegal by reason of any determination made by a court of
competent jurisdiction or any governmental authority having jurisdiction in the circumstances, such provisions shall be severed from this
contract to the extent of such invalidity or illegality and the validity, legality or enforceability of the remaining provisions of this contract
shall not in way be affected or impaired thereby. Waiver of any default shall not be a waiver of any other or subsequent default.
17. GST NUMBER: V.J. Pamensky Canada Inc. GST Number is 105553648
18. APPLICABLE LAWS AND FORUM: This contract shall be interpreted in accordance with and shall be governed by the laws of
the Province of Ontario, and the parties agree that any disputes hereunder or with respect to this quotation or the resulting contract
between the parties shall be determined exclusively by the Courts in the Province of Ontario, and the parties hereby expressly attorn to
the exclusive jurisdiction of the Courts in the Province of Ontario.
19. LANGUAGE: The parties acknowledge that they have required that this contract and all related documents be prepared in English.
Les parties reconnaissent avoir exige que la présente convention et tous les documents connexes solent rédigés en anglais. If the Buyer
requests, a French version of this agreement will be used.
20. LIABILITY: Notwithstanding anything to the contrary herein contained, the Liability of the Seller under any circumstances whatsoever and without exception shall be limited to the Purchase Price of the particular item forming part of the goods.
102
www.pamensky.com
Table of Contents
Variable Frequency Drives
CFW 08 Plus - Low Voltage VFD
CFW 08 Wash - Low Voltage NEMA 4X VFD
CFW 09 - Low Voltage VFD
CFW 09 Shark - Low Voltage NEMA 4X VFD
CFW 10 - Low Voltage VFD
CFW 11 - Low Voltage VFD
CFW 11M - - Low Voltage Modular VFD
CFW 700 - Low Voltage VFD
CFW 701 - Low Voltage HVAC VFD
MVW 01 - Medium Voltage VFD
MVW 01 - Compact Medium Voltage VFD
1.1
1.4
1.8
1.12
1.18
1.21
1.30
1.38
1.43
1.50
1.53
Soft Starters
SSW 05 Plus - Low Voltage Soft Starter
SSW 06 - Low Voltage Soft Starter
SSW 07 - Low Voltage Soft Starter
2.1
2.5
2.13
Panels
EDP - Enclosed Drive Panels
GPH - Combination Soft Starter
3.1
3.4
Industrial Control Products
PESW - Enclosed Motor Starters
CWC - Miniature Contactors
CWM - Standard Contactors
RW - Thermal Overload Relays
MPW - Manual Motor Protector
Pushbuttons and Pilot Lights
4.1
4.8
4.13
4.25
4.30
4.37
Reference
Variable Frequency Drive Sizing Guide
Direct On-Line Starters Sizing Guide
Soft Starters Sizing Guide
5.1
5.8
5.10
Version: CAN.AUT.09.2013
101
www.pamensky.com
CFW 08 Plus - VFD - Features
The WEG CFW-08 line of VFD‘s offers Single
and Three Phase Input Power Supply options for
motors up to 20HP. Outstanding features and
options in a NEMA 1 enclosure allow the CFW08
Plus to be successfully used in a large variety of
applications.
Standard Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
V/Hz or Sensorless Vector Control
NEMA 1 Enclosure
Single and Three-phase input voltage
200-240V, 380-480V or 500-600V input
voltage, 50 - 60 Hz
150% current overload capacity
16 bit DSP controlled PWM output
2.5 / 5 / 10 / 15 kHz adjustable swiching
frequency
Four isolated programmable digital inputs
Two programmable relay outputs
Two isolated programmable analog inputs
(with special function)
One analog output
Protective features: Over current, motor
overload, drive over temperature, output
phase-to-phase and phase-to-ground short
circuit, DC bus over and under voltage and
external fault
Control features: Linear and “S” ramp
acceleration and deceleration, local/remote
control, DC braking, torque boost, motor slip
compensation, electronic pot, preset speeds,
adjustable V/Hz profile, maximum and
minimum adjustable frequency limits, two skip
frequencies, adjustable output current limit,
JOG, ride-thru, flying start and PID regulator.
Display readings: Motor speed, frequency,
voltage, current, last fault, heatsink
temperature and drive status
•
Ambient: 32ºF (0ºC) to 104ºF (40ºC), 3300ft
(1000m) altitude, 90% humidity,
non-condensing
Optional Features
•
•
•
•
•
Dynamic Braking capabilities available
Remote Keypad with Copy Function
RS-232 or RS-485 Serial Interface
Modbus Communication*
DIN rail mounting through 2HP
*Requires optional RS-232 or RS-485 Interface
Applications
•
•
•
•
•
•
•
Pumps
Fans
Blowers
Conveyors
Rollout tables
Agitators
Mixers
Variable Frequency Drives
1.1
www.pamensky.com
101
CFW-08 - Part Number Specification
CFW08
0016
T
3848
P
O
--
SI
DB
A1
DN
H1
S3
1
2
3
4
5
6
7
8
9
10
11
12
13
1.
CFW-08 Variable Frequency Drive
2.
Output Rated Current
3.
Power Supply:
S = single-phase
T = three-phase
B = single-phase or three-phase
4.
Power Supply Voltage:
2024 = 200-240 V
3848 = 380-480 V
5060 = 500-600 V
5.
Language:
P = Portuguese
E = English
G = German
S = Spanish
6.
Product Version:
S = Standard
O = With options
7.
Enclosure:
blank = Standard (see technical specifications table)
N1 = NEMA 1
N4 = NEMA 4X
8.
HMI - Human Machine
Interface:
blank = standard
SI = without HMI
9.
Control Board:
blank = standard (CFW-08 Standard)
A1 = control 1 (CFW-08 PLUS)
A2 = control 2 (CFW-08 Plus with bipolar analog inputs)
A3 = CANopen (1)
A4 = DeviceNet (1)
A5 = Pumps
10.
EMI Filter:
blank = without filter
FA = Internal Class A filter
11.
Special Hardware:
Blank = not provided
Hx = X version special hardware
12.
Special Software:
Blank = not provided
Sx = X version special software
Example:
CFW080040B2024EOA1
Note:
(1)
1.2
220-240V
380-480V
500-600V
0016 = 1.6 A
0026 = 2.6 A
0040 = 4.0 A
0070 = 7.0 A
0073 = 7.3 A
0100 = 10 A
0160 = 16 A
0220 = 22 A
0280 = 28 A
0330 = 33 A
0010 = 1.0 A
0016 = 1.6 A
0026 = 2.6 A
0027 = 2.7 A
0040 = 4.0 A
0043 = 4.3 A
0065 = 6.5 A
0100 = 10 A
0130 = 13 A
0160 = 16 A
0240 = 24 A
0300 = 30 A
0017 = 1.7 A
0030 = 3.0 A
0043 = 4.3 A
0070 = 7.0 A
0100 = 10 A
0120 = 12 A
* Selection Table for 2
Not avaliable for 500-600V
Variable Frequency Drives
101
www.pamensky.com
CFW 08 Plus - Table of Products
200-240V - Single Phase
Electrical Data
Mechanical Data
Current
(A)
Braking
Transistor
Motor
(HP)
1.6
2.6
4.0
7.3
10
N
N
N
Y
Y
0.25
0.5
1
2
3
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions (in)
HxWxD
WEG Part Number
List Price
1
1
1
2
2
2.2
2.2
2.2
4.4
4.4
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
5.95 x 2.95 x 5.16
5.95 x 2.95 x 5.16
5.95 x 2.95 x 5.16
7.87 X 4.53 X 5.91
7.87 X 4.53 X 5.91
CFW080016S2024EON1A1
CFW080026S2024EON1A1
CFW080040S2024EON1A1
CFW080073B2024EON1A1
CFW080100B2024EON1A1
$460
465
491
788
866
Degree of
Protection
Dimensions (in)
HxWxD
WEG Part Number
List Price
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
5.95 x 2.95 x 5.16
5.95 x 2.95 x 5.16
5.95 x 2.95 x 5.16
5.95 x 2.95 x 5.16
7.87 X 4.53 X 5.91
7.87 X 4.53 X 5.91
7.87 X 4.53 X 5.91
7.99 x 5.63 x 6.50
11.41 x 7.16 x 7.71
11.41 x 7.16 x 7.71
CFW080016B2024EON1A1
CFW080026B2024EON1A1
CFW080040B2024EON1A1
CFW080070T2024EON1A1
CFW080073B2024EON1A1
CFW080100B2024EON1A1
CFW080160T2024EON1A1
CFW080220T2024EON1A1
CFW080280T2024EON1A1
CFW080330T2024EON1A1
$535
543
568
669
788
866
1,044
1,643
2,114
2,711
200-240V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Current
(A)
Braking
Transistor
Motor
(HP)
Frame
Weight
(lb)
1.6
2.6
4.0
7.0
7.3
10
16
22
28
33
N
N
N
N
Y
Y
Y
Y
Y
Y
0.25
0.5
1
2
2
3
5
7.5
10
12.5
1
1
1
1
2
2
2
3
4
4
2.2
2.2
2.2
2.2
4.4
4.4
4.4
5.5
13.2
13.2
Degree of
Protection
Dimensions (in)
HxWxD
WEG Part Number
List Price
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
5.95 x 2.95 x 5.16
5.95 x 2.95 x 5.16
5.95 x 2.95 x 5.16
7.87 X 4.53 X 5.91
5.95 x 2.95 x 5.16
7.87 X 4.53 X 5.91
7.87 X 4.53 X 5.91
7.87 X 4.53 X 5.91
7.99 x 5.63 x 6.50
7.99 x 5.63 x 6.50
11.41 x 7.16 x 7.71
11.41 x 7.16 x 7.71
CFW080010T3848EON1A1
CFW080016T3848EON1A1
CFW080026T3848EON1A1
CFW080027T3848EON1A1
CFW080040T3848EON1A1
CFW080043T3848EON1A1
CFW080065T3848EON1A1
CFW080100T3848EON1A1
CFW080130T3848EON1A1
CFW080160T3848EON1A1
CFW080240T3848EON1A1
CFW080300T3848EON1A1
$662
685
705
767
793
979
1,168
1,357
1,574
1,775
2,556
3,078
380-480V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Current
(A)
Braking
Transistor
Motor
(HP)
Frame
Weight
(lb)
1.0
1.6
2.6
2.7
4
4.3
6.5
10
13
16
24
30
N
N
N
Y
N
Y
Y
Y
Y
Y
Y
Y
0.33
0.75
1
1
2
2
3
5
7.5
10
15
20
1
1
1
2
1
2
2
2
3
3
4
4
2.2
2.2
2.2
4.4
2.2
4.4
4.4
4.4
5.5
5.5
13.2
13.2
Degree of
Protection
Dimensions (in)
HxWxD
WEG Part Number
List Price
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
7.99 x 5.63 x 6.50
7.99 x 5.63 x 6.50
7.99 x 5.63 x 6.50
7.99 x 5.63 x 6.50
7.99 x 5.63 x 6.50
7.99 x 5.63 x 6.50
CFW080017T5060EON1A1
CFW080030T5060EON1A1
CFW080043T5060EON1A1
CFW080070T5060EON1A1
CFW080100T5060EON1A1
CFW080120T5060EON1A1
$1,057
1,111
1,256
1,406
1,625
1,824
500-600V - Three Phase
Electrical Data
Mechanical Data
Current
(A)
Braking
Transistor
Motor
(HP)
Frame
Weight
(lb)
1.7
3
4.3
7
10
12
Y
Y
Y
Y
Y
Y
1
2
3
5
7.5
10
3
3
3
3
3
3
5.5
5.5
5.5
5.5
5.5
5.5
Notes:
Purchasing Data
The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/
or from other manufacturers, specify the VFD through the motor rated current.
Variable Frequency Drives
1.3
www.pamensky.com
101
CFW 08 Wash - NEMA 4X (IP56) VFD
The frequency inverter CFW-08 Wash is an
inverter dedicated to applications that require a
higher protection degree. The Nema 4X
protection degree assures protection against
dust, dirt and directed water jets.
Standard Features - CFW 08
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.4
•
V/Hz or Sensorless Vector Control
NEMA 4X Enclosure
Single and Three-phase input voltage
200-240V, 380-480V or 500-600V input
voltage, 50 - 60 Hz
150% current overload capacity
16 bit DSP controlled PWM output
2.5 / 5 / 10 / 15 kHz adjustable swiching
frequency
Four isolated programmable digital inputs
Two programmable relay outputs
Two isolated programmable analog inputs
(with special function)
One analog output
Protective features: Over current, motor
overload, drive over temperature, output
phase-to-phase and phase-to-ground short
circuit, DC bus over and under voltage and
external fault
Control features: Linear and “S” ramp
acceleration and deceleration, local/remote
control, DC braking, torque boost, motor slip
compensation, electronic pot, preset speeds,
adjustable V/Hz profile, maximum and
minimum adjustable frequency limits, two skip
frequencies, adjustable output current limit,
JOG, ride-thru, flying start and PID regulator.
Display readings: Motor speed, frequency,
voltage, current, last fault, heatsink
temperature and drive status
Ambient: 32ºF (0ºC) to 104ºF (40ºC), 3300ft
(1000m) altitude, 90% humidity,
non-condensing
Recommended Environments
•
•
•
NEMA 4X indoor environments
NEMA 12 indoor environments
IP56 environments
Optional Features
• Dynamic Braking capabilities available
• RS-232 or RS-485 Serial Interface
• Modbus Communication*
*Requires optional RS-232 or RS-485 Interface
Applications
•
•
•
•
•
•
•
Pumps
Fans
Blowers
Conveyors
Rollout tables
Agitators
Mixers
Variable Frequency Drives
101
www.pamensky.com
CFW 08 Wash - Table of Products
200-240V - Single Phase
Electrical Data
Mechanical Data
Current
(A)
Braking
Transistor
Motor
(HP)
7.3
10
Y
Y
2
3
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions (in)
HxWxD
WEG Part Number
List Price
A
A
11.2
11.2
NEMA 4X
NEMA 4X
10.43 x 6.50 x 8.50
10.43 x 6.50 x 8.50
CFW080073B2024EON4A1
CFW080100B2024EON4A1
$1,326
1,456
Degree of
Protection
Dimensions (in)
HxWxD
WEG Part Number
List Price
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
10.43 x 6.50 x 8.50
10.43 x 6.50 x 8.50
10.43 x 6.50 x 8.50
13.40 x 8.47 x 8.50
13.40 x 8.47 x 8.50
13.40 x 8.47 x 8.50
CFW080073B2024EON4A1
CFW080100B2024EON4A1
CFW080160T2024EON4A1
CFW080220T2024EON4A1
CFW080280T2024EON4A1
CFW080330T2024EON4A1
$1,326
1,456
1,558
2,090
2,688
3,296
200-240V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Current
(A)
Braking
Transistor
Motor
(HP)
Frame
Weight
(lb)
7.3
10
16
22
28
33
Y
Y
Y
Y
Y
Y
2
3
5
7.5
10
12.5
A
A
A
B
B
B
11.2
11.2
11.0
15.4
15.9
15.9
Degree of
Protection
Dimensions (in)
HxWxD
WEG Part Number
List Price
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
10.43 x 6.50 x 8.50
10.43 x 6.50 x 8.50
10.43 x 6.50 x 8.50
10.43 x 6.50 x 8.50
13.40 x 8.47 x 8.50
13.40 x 8.47 x 8.50
13.40 x 8.47 x 8.50
13.40 x 8.47 x 8.50
CFW080027T3848EON4A1
CFW080043T3848EON4A1
CFW080065T3848EON4A1
CFW080100T3848EON4A1
CFW080130T3848EON4A1
CFW080160T3848EON4A1
CFW080240T3848EON4A1
CFW080300T3848EON4A1
$1,120
1,428
1,680
1,800
2,088
2,354
3,248
4,250
380-480V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Current
(A)
Braking
Transistor
Motor
(HP)
Frame
Weight
(lb)
2.7
4.3
6.5
10
13
16
24
30
Y
Y
Y
Y
Y
Y
Y
Y
1
2
3
5
7.5
10
15
20
A
A
A
A
B
B
B
B
10.1
11.5
11.7
11.7
15.9
15.9
17.2
17.4
Degree of
Protection
Dimensions (in)
HxWxD
WEG Part Number
List Price
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
13.40 x 8.47 x 8.50
13.40 x 8.47 x 8.50
13.40 x 8.47 x 8.50
13.40 x 8.47 x 8.50
13.40 x 8.47 x 8.50
13.40 x 8.47 x 8.50
CFW080017T5060EON4A1
CFW080030T5060EON4A1
CFW080043T5060EON4A1
CFW080070T5060EON4A1
CFW080100T5060EON4A1
CFW080120T5060EON4A1
$1,578
1,818
1,876
2,098
2,338
2,624
500-600V - Three Phase
Electrical Data
Mechanical Data
Current
(A)
Braking
Transistor
Motor
(HP)
Frame
Weight
(lb)
1.7
3
4.3
7
10
12
Y
Y
Y
Y
Y
Y
1
2
3
5
7.5
10
B
B
B
B
B
B
13.9
15.4
15.6
15.6
15.6
15.6
Notes:
Purchasing Data
The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/
or from other manufacturers, specify the VFD through the motor rated current.
Variable Frequency Drives
1.5
www.pamensky.com
101
CFW 08 Plus - Accessories
Keypads
Description
NEMA4 Remote Keypad (requires CFW08-MIS-RS & cable)
Remote Keypad Interface
Keypad Cover
Part Number
List Price
HMI-CFW08-RS
MIP-CFW08-RS
TCL-CFW08
$148
70
14
Part Number
List Price
CAB-RS-1
CAB-RS-2
CAB-RS-3
CAB-RS-5
CAB-RS-7.5
CAB-RS-10
$23
31
42
52
62
73
Part Number
List Price
KCS-CFW08
KSD-CFW08
KRS-485-CFW08
$112
144
214
Keypad Cables
Description
1m (3.3 ft.) Remote Keypad Cable
2m (6.6 ft.) Remote Keypad Cable
3m (10 ft.) Remote Keypad Cable
5m (15 ft.) Remote Keypad Cable
7.5m (25 ft.) Remote Keypad Cable
10m (33 ft.) Remote Keypad Cable
Communication and Gland Kits
Description
RS-232 Serial Comm. Module (mounted in place of keypad)
PC Communication Kit (SUPERDRIVE)
Interface for RS-485 Communication
1.6
Variable Frequency Drives
101
www.pamensky.com
CFW 08 Plus - Technical Data
Single-Phase
Voltage
Power Supply
Enclosure
Three-Phase
Performance
Control Inputs
Outputs
Communication
380-480V: 380/400/415/440/460/480 V (+10% - 15%)
500-600V: 525/575/600 (+10 - 15%)
Frequency
50 / 60 Hz +/- 2 Hz ( 48...62 Hz)
Cos * (Displacement Power Factor)
> 0.98
Drive
Standard
NEMA 1 in sizes 3 and 4and IP 20 in sizes 1 and 2
HMI
Optional
NEMA 12 Parallel, remote HMI (IP54) (HMI-CFW08-RS)
NEMA 12 Serial, remote HMI (IP54) (HMI-CFW08-RS)
Power Supply Type
Switching power supply
Control Method
DSP (Digital Signal Processor), 16 bits, sinusoidal PWM (Space Vector Modulation)
Control Type
Control
200-240V: 200/220/230/240 V (+10% - 15%)
200-240V: 200/220/230/240 V (+10% - 15%)
Imposed voltage - linear V/Hz or quadratic
Sensorless vector control (WC: Voltage Vector Control)
Switching Frequency
IGBT Transistors - Frequencies: 2.5 / 5.0 / 10 / 15 kHz
Frequency Range
0...300Hz
Fequency Resolution
Analog Ref.: 0.1% of Fmax. And digital ref.: 0.01 Hz (f<100Hz); 0.1 Hz (f>100 Hz)
Accuracy (25º C = 10ºC)
Analog Ref.: 0.5% and digital Ref.: 0.01%
Overload capacity
150% during 60 sec. Every 10 min (1.5 x Rated Current.)
Efficiency
>95% at full load
Speed control
Regulation: 1% of the rated speed with slip compensation (in Sensorless Vector)
Analog
2 isolated inputs 0..10, 0/4...20mA or - 10...+10V (Al1 e Al2)1
Digital
Relay (2)
4 Programmable isolated inputs - with NPN or PNP logic (Dl1...Dl4)
2 Isolated PTC inputs via AL1 and AL2
2 Programmable outpluts, 1NO & 1NC
Analog (1)
1 Isolated analog output 0...10V, 0/4...20mA ( 8 bits )
Serial Interface
RS-232 or RS-485 (optional)
“Field Bus” Networks
Unit for ProfiBus DP Communication, DeviceNet (optional) and ModBus RTU (optional)
DC link overvoltage / undervoltage
Overtemperature
Output overcurrent
Safety
Protections
Motor overload ( i x t )
Hardware fault, external fault and serial communication error
Output phase to phase and phase to ground short circuit
Programming fault and self-tuning error
On/Off , Parameter Setting ( Programming of special functions )
Commands
Frequency Increment / Decrement ( Speed )
JOG, Reversal of Direction of Rotation and Local /Remote Selection
Motor Output Frequency ( Hz )
DC Link Voltage ( V )
Human-Machine
Interface
(HMI)
Value proportional to the frequency ( Ex.:RPM )
Monitoring (Reading)
Heat Sink Temperature
Motor Output Current ( A )
Motor Output Voltage ( V )
Error / Fault Messages
Load Torque
Environment
Finishing
Conformities
Certifications
Temperature
0 ... 40 °C (up to 50 °C with output current derating 2% / °C)
Humidity
5 ... 90% non condensing
Altitude
0 ... 1000 m (up tp 4000 m with output current derating 10% / 1000 m)
Color
Politherm 20 mt gray and Politherm 20 mt blue
Electromagnetic Compatibility
EMC Directive 89/336/EEC - Industrial Environment; EN 61800-3 (EMC - Emission and Immunity) - Special Request
Low Voltage
LVD 73/23/EEC - Low Voltage Directive / UL 508C
IEC 146
Semiconductors convertors
UL 508 C
Power conversion equipment
EN 50178
Electronic equipment for use in power installations
EN 61010
Safety requirements for electrical equipment for measurement, control and laboratory use
UL (USA) and cUL (CANADA)
Underwriters Laboratories Inc. / USA
CE (EUROPE)
SGS / England
IRAM (ARGENTINA)
Instituto Argentino de Normalización
C-Tick (AUSTRALIA)
Australian Communications Authority
Variable Frequency Drives
1.7
www.pamensky.com
101
CFW 09 - Variable Frequency Drive
The CFW 09‘s Vectrue Technology combines
V/F, Sensorless Vector and Closed Loop Vector
(with encoder) control techniques in one product.
Optimal Braking saves the need for the dynamic
braking resistor in some applications allowing a
more compact and economical solution.
Standard Features
Standard Features - cont.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.8
V/Hz or Sensorless Vector Control
Self Tuning to motor parameters
NEMA 1 Enclosure up to 200HP
IP20 Enclosure from 250 to 500HP
200-240V, 380-480V or 500-600/690V input
voltage
Single or Three-phase input voltage up to
3HP/230V
*Call 1 877 PAMENSKY for higher than 3HP
150% current overload capacity
DC bus connections accessible
Detachable Smart Keypad with dual display
and Copy Function
32 bit RISC microprocessor controlled PWM
output
1.25 / 2.5 / 5 / 10 kHz adjustable switching
frequency
Six isolated programmable digital inputs
Three programmable relay outputs (250Vac /
1A)
Two isolated programmable analog inputs
Two programmable analog outputs (0 - 10
Vdc)
Protective features: Over current, motor
overload, drive over temperature, output
phase-to-phase and phase-to-ground short
circuit, DC bus over and under voltage,
power supply under voltage and phase loss
and external fault
•
•
Control features: Linear and “S” ramp
acceleration and deceleration, local/remote
control, DC braking, torque boost, motor
slip compensation, electronic pot, preset
speeds, adjustable V/Hz profile, maximum
and minimum adjustable motor speed limits,
three skip frequencies, adjustable output
current limit, JOG, ride-thru, flying start and
PID regulator
Display readings: Motor speed, frequency,
voltage, current and torque, output power
(kW), last ten faults, drive status, digital and
analog I/O status, hours powered and hours
running
Ambient: 32ºF (0ºC) to 104ºF (40ºC), 3300
ft (1000m) altitude, 90% humidity, noncondensing
Optional Features
•
•
•
•
•
•
•
•
•
Closed loop vector control
Remote keypad with cable and mounting
frame
RS-232 or RS-485 Serial Interface
On/Off line PC programming with
SUPERDRIVE
Fieldbus Comm: Profibus DP, DeviceNet or
Modbus RTU, Ethernet TCP/IP
Encoder buffered output
Additional digital and analog I/O
Dynamic Braking capabilities for most models
PLC Cards
Variable Frequency Drives
101
www.pamensky.com
CFW-09 - Part Number Specification
CFW09
0016
T
3848
P
O
--
SI
DB
A1
DN
H1
S3
Z
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1.
CFW-09 VSD
2.
Output Rated Current for Constant Torque (CT) Sizing
3.
Power Supply:
T = Three-phase
4.
Power Supply Voltage:
2223 = 220 ... 230 VAC
3848 = 380 ... 480 VAC
5060 = 500 ... 600 VAC
5069 = 500 ... 690 VAC
5.
Language:
P = Portuguese
E = English
6.
Product Version:
S = Standard
O = With options
7.
Enclosure:
blank = Standard (see technical specifications table)
N4 = NEMA 4 / IP 56 (models up to 10HP)
8.
HMI - Human Machine
Interface:
blank = standard (with HMI of LED´S + LCD)
SI = Without HMI
IL = Optional only with LED HM
9.
Dynamic Braking:
blank = Standard
DB = With Built-in Dynamic Braking Transistor
RB = Regenative rectifying unit (models from 105A
at 220V, and from 86A at 380-480V)
G = German
S = Spanish
220-230V
380-480V
500-600V
500-690V
0006 = 6.0A
0007 = 7.0A
0010 = 10A
0013 = 13A
0016 = 16A
0024 = 24A
0028 = 28A
0045 = 45A
0054 = 54A
0070 = 70A
0086 = 86A
0105 = 105A
0130 = 130A
0142 = 142A
0180 = 180A
0240 = 240A
0003 = 3.6A
0004 = 4.0A
0005 = 5.5A
0009 = 9.0A
0013 = 13A
0016 = 16A
0024 = 24A
0030 = 30A
0038 = 38A
0045 = 45A
0060 = 60A
0070 = 70A
0086 = 86A
0105 = 105A
0142 = 142A
0180 = 180A
0211 = 211A
0240 = 240A
0312 = 312A
0361 = 361A
0450 = 450A
0515 = 515A
0600 = 600A
0002 = 2.9A
0004 = 4.2A
0007 = 7.0A
0010 = 10A
0012 = 12A
0014 = 14A
0022 = 22A
0027 = 27A
0032 = 32A
0044 = 44A
0053 = 53A
0063 = 63A
0079 = 79A
0107 = 107A
0147 = 147A
0211 = 211A
0247 = 247A
0315 = 315A
0418 = 418A
0472 = 472A
0107 = 107A
0147 = 147A
0211 = 211A
0247 = 247A
0315 = 315A
0343 = 343A
0418 = 418A
0472 = 472A
* Selection Table for 2
10.
Expansion Boards:
blank = Standard
A1 = EBA.01-CFW09 optional
A2 = EBA.02-CFW09 optional
A3 = EBA.03-CFW09 optional
B1 = EBB.01-CFW09 optional
B2 = EBB.02-CFW09 optional
B3 = EBB.03-CFW09 optional
B4 = EBB.04-CFW09 optional
B5 = EBB.05-CFW09 optional
C1 = EBC1.01-CFW09 optional
C2 = EBC1.02-CFW09 optional
C3 = EBC1.03-CFW09 optional
E1 = Optional with EBE1.00 - CFW09
P1 = PLC1.01-CFW09 optional
P2 = PLC2.00-CFW09 optional
11.
FieldBus
Communications cards:
blank = Standard (not provided)
PD = KFB-PD optional (Profibus DP)
DN = KFB-DN optional (Device Net)
DD = Optional with KFB – DD (Device Net Drive Profile /
Special software)
EN = EtherNet / IP standard
12.
Special Hardware:
blank = not provided
H1...Hn = Special Hardware version-Optional
HD = Models from 105A at 220V, and from 86A at 380-480V are power supplied via DC link
HC/HV = The CFW09 VSDs mechanics from 2 to 8 have and inductor line for the DC link built into the product. To
request the VSD with the inductor in place just add the code “HC” (for drives operating on Variable Torque).
13.
Special Software:
blank = Standard Spftware Version
S1...Sn = Optional with version a special software
SF = Protocol Metasys N2
End of Part Number:
Z
Example:
CFW090013T2223ESZ
14.
Variable Frequency Drives
SC = Hoist functions
SN = Winder I with power calculation
SQ = Special version for Kit Device Net Drive Profile
1.9
www.pamensky.com
101
CFW 09 - Table of Products
220-230V
Electrical Data
Current
(A)
CT
VT
6
7
10
13
16
24
28
45
54
68
70
86
86 105
105 130
130 150
142 174
180
240
Built-In
Dynamic
Braking
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Optional
Optional
Optional
Optional
Optional
Optional
External DB
External DB
Mechanical Data
Maximum Applicable Motor
Constant Torque
Variable Torque
HP
KW
HP
KW
1.5
2
3
3
5
7.5
10
15
20
25
30
40
50
50
60
75
1.1
1.5
2.2
2.2
3.7
5.5
7.5
11
15
18.5
22
30
37
37
45
55
1.5
2
3
3
5
5.5
10
15
25
30
40
50
50
60
60
75
1.1
1.5
2.2
2.2
3.7
5.5
7.5
11
18.5
22
30
37
37
45
45
55
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
WEG Part Number
List
Price
1
1
1
1
2
2
2
3
4
5
5
6
6
7
8
8
8
8
8
8
13
13
13
42
50
90
90
121
121
154
221
221
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
8.27 x 5.63 x 7.72
8.27 x 5.63 x 7.72
8.27 x 5.63 x 7.72
8.27 x 5.63 x 7.72
11.42 x 7.16 x 7.72
11.42 x 7.16 x 7.72
11.42 x 7.16 x 7.72
15.35 x 8.78 x 10.79
18.70 x 9.84 x 10.79
21.65 x 13.19 x 10.79
21.65 x 13.19 x 10.79
26.57 x 13.19 x 11.77
26.57 x 13.19 x 11.77
32.87 x 13.19 x 12.20
38.38 x 16.14 x 14.57
38.38 x 16.14 x 14.57
CFW090006T2223ESZ
CFW090007T2223ESZ
CFW090010T2223ESZ
CFW090013T2223ESZ
CFW090016T2223ESZ
CFW090024T2223ESZ
CFW090028T2223ESZ
CFW090045T2223ESZ
CFW090054T2223ESZ
CFW090070T2223ESZ
CFW090086T2223ESZ
CFW090105T2223ESZ
CFW090130T2223ESZ
CFW090142T2223ESZ
CFW090180T2223ESZ
CFW090240T2223ESZ
$1,468
1,486
1,563
1,605
1,731
2,274
2,517
3,837
5,339
7,716
8,124
9,788
10,488
12,178
16,863
24,057
220-230V - With Optional Dynamic Braking
Electrical Data
Current
(A)
CT
54
70
86
105
130
142
VT
68
86
105
130
150
174
Built-In
Dynamic
Braking
Yes
Yes
Yes
Yes
Yes
Yes
Mechanical Data
Maximum Applicable Motor
Constant Torque
HP
20
25
30
40
50
50
KW
15
18.5
22
30
37
37
Purchasing Data
Variable Torque
HP
25
30
40
50
50
60
KW
18.5
22
30
37
37
45
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
WEG Part Number
List
Price
4
5
5
6
6
7
50
90
90
121
121
154
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
18.70 x 9.84 x 10.79
21.65 x 13.19 x 10.79
21.65 x 13.19 x 10.79
26.57 x 13.19 x 11.77
26.57 x 13.19 x 11.77
32.87 x 13.19 x 12.20
CFW090054T2223EODBZ
CFW090070T2223EODBZ
CFW090086T2223EODBZ
CFW090105T2223EODBZ
CFW090130T2223EODBZ
CFW090142T2223EODBZ
$6,377
9,109
9,589
11,447
12,266
15,132
380-480V
Electrical Data
Current
(A)
CT
VT
3.6
4
5.5
9
13
16
24
30
36
38
45
45
54
60
70
70
86
86 105
105 130
142 174
180
211
240
312
361
450
515
600
Notes:
1.10
Built-In
Dynamic
Braking
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Optional
Optional
Optional
Optional
Optional
Optional
Optional
External DB
External DB
External DB
External DB
External DB
External DB
External DB
External DB
Mechanical Data
Maximum Applicable Motor
Constant Torque
HP
2
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
150
150
200
250
300
350
400
500
KW
1.5
1.5
2
4
6
8
11
15
18.5
22
30
37
45
55
75
110
110
150
185
220
260
300
370
Variable Torque
HP
2
2
3
5
7.5
10
15
25
30
40
50
60
75
100
125
150
150
200
250
300
350
400
500
KW
1.5
1.5
2.2
4
5.5
7.5
11
18.5
22
30
37
45
55
75
90
110
110
150
185
220
260
300
370
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
WEG Part Number
List
Price
1
1
1
1
2
2
2
3
4
4
5
5
6
6
7
8
8
8
9
9
10
10
10
8
8
8
8
13
13
13
42
50
50
90
90
121
121
154
221
221
221
476
476
571
571
571
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
IP20
IP20
IP20
IP20
IP20
8.27 x 5.63 x 7.72
8.27 x 5.63 x 7.72
8.27 x 5.63 x 7.72
8.27 x 5.63 x 7.72
11.42 x 7.16 x 7.72
11.42 x 7.16 x 7.72
11.42 x 7.16 x 7.72
15.35 x 8.78 x 10.79
18.70 x 9.84 x 10.79
18.70 x 9.84 x 10.79
21.65 x 13.19 x 10.79
21.65 x 13.19 x 10.79
26.57 x 13.19 x 11.77
26.57 x 13.19 x 11.77
32.87 x 13.19 x 12.20
38.38 x 16.14 x 14.57
38.38 x 16.14 x 14.57
38.38 x 16.14 x 14.57
39.37 x 27.56 x 19.33
39.37 x 27.56 x 19.33
46.65 x 27.56 x 19.33
46.65 x 27.56 x 19.33
46.65 x 27.56 x 19.33
CFW090003T3848ESZ
CFW090004T3848ESZ
CFW090005T3848ESZ
CFW090009T3848ESZ
CFW090013T3848ESZ
CFW090016T3848ESZ
CFW090024T3848ESZ
CFW090030T3848ESZ
CFW090038T3848ESZ
CFW090045T3848ESZ
CFW090060T3848ESZ
CFW090070T3848ESZ
CFW090086T3848ESZ
CFW090105T3848ESZ
CFW090142T3848ESZ
CFW090180T3848ESZ
CFW090211T3848ESZ
CFW090240T3848ESZ
CFW090312T3848ESZ
CFW090361T3848ESZ
CFW090450T3848ESZ
CFW090515T3848ESZ
CFW090600T3848ESZ
$1,646
1,685
1,744
1,884
1,980
2,464
2,654
3,780
4,502
5,628
6,976
7,430
9,110
9,956
11,862
18,778
21,410
22,280
26,396
27,584
35,964
41,636
47,492
The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/
or from other manufacturers, specify the VFD through the motor rated current.
Variable Frequency Drives
101
www.pamensky.com
CFW 09 - Table of Products
380-480V - With Optional Dynamic Braking
Electrical Data
Current
(A)
CT
38
45
60
70
86
105
142
VT
45
54
70
86
105
130
174
Built-In
Dynamic
Braking
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Mechanical Data
Maximum Applicable Motor
Constant Torque
HP
25
30
40
50
60
75
100
KW
19
22
30
37
45
55
75
Variable Torque
HP
30
40
50
60
75
100
125
KW
22
30
37
45
55
55
90
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
WEG Part Number
List
Price
4
4
5
5
6
6
7
50
50
90
90
121
121
154
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
18.70 x 9.84 x 10.79
18.70 x 9.84 x 10.79
21.65 x 13.19 x 10.79
21.65 x 13.19 x 10.79
26.57 x 13.19 x 11.77
26.57 x 13.19 x 11.77
32.87 x 13.19 x 12.20
CFW090038T3848EODBZ
CFW090045T3848EODBZ
CFW090060T3848EODBZ
CFW090070T3848EODBZ
CFW090086T3848EODBZ
CFW090105T3848EODBZ
CFW090142T3848EODBZ
$5,790
7,884
9,984
10,832
13,457
15,678
18,515
500-600V
Electrical Data
Current
(A)
CT
2.9
4.2
7
10
12
14
22
27
32
44
53
63
79
VT
4.2
7
10
12
14
14
27
32
32
53
63
79
99
Built-In
Dynamic
Braking
Yes
Yes
Yes
Yes
Yes
Yes
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Mechanical Data
Maximum Applicable Motor
Constant Torque
HP
2
3
5
7.5
10
15
20
25
30
40
50
60
75
KW
1.5
2.2
3.7
5.5
7.5
9.2
15
18.5
22
30
37
45
55
Variable Torque
HP
3
5
7.5
10
15
15
25
30
30
50
60
75
100
KW
2.2
4
5.5
7.5
9.2
9.2
18.5
22
22
37
45
55
75
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
WEG Part Number
List
Price
2
2
2
2
2
2
4
4
4
7
7
7
7
13
13
13
13
13
13
50
50
50
154
154
154
154
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
11.4 x 7.2 x 7.7
11.4 x 7.2 x 7.7
11.4 x 7.2 x 7.7
11.4 x 7.2 x 7.7
11.4 x 7.2 x 7.7
11.4 x 7.2 x 7.7
18.7 x 9.8 x 10.8
18.7 x 9.8 x 10.8
18.7 x 9.8 x 10.8
32.9 x 13.2 x 11.8
32.9 x 13.2 x 11.8
32.9 x 13.2 x 11.8
32.9 x 13.2 x 11.8
CFW090002T5060ESZ
CFW090004T5060ESZ
CFW090007T5060ESZ
CFW090010T5060ESZ
CFW090012T5060ESZ
CFW090014T5060ESZ
CFW090022T5060ESZ
CFW090027T5060ESZ
CFW090032T5060ESZ
CFW090044T5060ESZ
CFW090053T5060ESZ
CFW090063T5060ESZ
CFW090079T5060ESZ
$1,742
1,801
2,305
2,413
2,935
3,271
4,194
4,928
6,708
8,941
10,550
12,558
14,928
500-600V - With Optional Dynamic Braking
Electrical Data
Current
(A)
CT
22
27
32
44
53
63
79
VT
27
32
32
53
63
79
99
Built-In
Dynamic
Braking
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Mechanical Data
Maximum Applicable Motor
Constant Torque
HP
20
25
30
40
50
60
75
KW
15
18.5
22
30
37
45
55
Purchasing Data
Variable Torque
HP
25
30
30
50
60
75
100
KW
18.5
22
22
37
45
55
75
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
WEG Part Number
List
Price
4
4
4
7
7
7
7
50
50
50
154
154
154
154
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
18.7 x 9.8 x 10.8
18.7 x 9.8 x 10.8
18.7 x 9.8 x 10.8
32.9 x 13.2 x 11.8
32.9 x 13.2 x 11.8
32.9 x 13.2 x 11.8
32.9 x 13.2 x 11.8
CFW090022T5060EODBZ
CFW090027T5060EODBZ
CFW090032T5060EODBZ
CFW090044T5060EODBZ
CFW090053T5060EODBZ
CFW090063T5060EODBZ
CFW090079T5060EODBZ
$5,526
6,516
8,833
11,490
13,454
16,120
18,968
500-690V
Electrical Data
Current
(A)
CT
107
147
211
247
315
343
418
472
Notes:
VT
147
196
211
315
343
418
472
555
Built-In
Dynamic
Braking
External DB
External DB
External DB
External DB
External DB
External DB
External DB
External DB
Mechanical Data
Maximum Applicable Motor
Constant Torque
HP
100
150
200
250
300
350
400
500
KW
75
110
150
185
220
250
300
370
Variable Torque
HP
150
200
200
300
350
400
500
600
KW
110
150
150
220
250
300
370
450(370)
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
8E
8E
8E
10E
10E
10E
10E
10E
253
253
253
682
682
682
682
682
NEMA 1
NEMA 1
NEMA 1
IP20
IP20
IP20
IP20
IP20
45.1 x 16.1 x 14.6
45.1 x 16.1 x 14.6
45.1 x 16.1 x 14.6
46.6 x 27.5 x 22.9
46.6 x 27.5 x 22.9
46.6 x 27.5 x 22.9
46.6 x 27.5 x 22.9
46.6 x 27.5 x 22.9
WEG Part Number
List
Price
CFW090107T5069ESZ
CFW090147T5069ESZ
CFW090211T5069ESZ
CFW090247T5069ESZ
CFW090315T5069ESZ
CFW090343T5069ESZ
CFW090418T5069ESZ
CFW090472T5069ESZ
18,119
27,295
36,995
39,018
42,264
56,796
61,225
65,161
The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/
or from other manufacturers, specify the VFD through the motor rated current.
Variable Frequency Drives
1.11
www.pamensky.com
101
CFW 09 Shark - Variable Frequency Drive
CFW 09 Drives with a NEMA 4X (IP 56)
enclosure, designed for highly aggressive
environments including:
• Chemical industry
• Petrochemical
• Food industry
• Other applications requiring full protection
Standard Features
Standard Features - cont.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
V/Hz or Sensorless Vector Control
Self Tuning to motor parameters
NEMA 4X (IP56) Stainless Steel Enclosure
200-240V up to 5HP, 380-480V up to 10HP
Single or Three-phase input voltage up to
3HP/230V
150% current overload capacity
DC bus connections accessible
Detachable Smart Keypad with dual display
and Copy Function
32 bit RISC microprocessor controlled PWM
output
1.25 / 2.5 / 5 / 10 kHz adjustable switching
frequency
Six isolated programmable digital inputs
Three programmable relay outputs
(250Vac/1A)
Two isolated programmable analog inputs
Two programmable analog outputs (0 - 10
Vdc)
Protective features: Over current, motor
overload, drive over temperature, output
phase-to-phase and phase-to-ground short
circuit, DC bus over and under voltage,
power supply under voltage and phase loss
and external fault
•
•
Optional Features
•
•
•
•
•
•
•
1.12
Control features: Linear and “S” amp
acceleration and deceleration, local/remote
control, DC braking, torque boost, motor
slip compensation, electronic pot, preset
speeds, adjustable V/Hz profile, maximum
and minimum adjustable motor speed limits,
three skip frequencies, adjustable output
current limit, JOG, ride-thru, flying start and
PID regulator
Display readings: Motor speed, frequency,
voltage, current and torque, output power
(kW), last four faults, drive status, digital and
analog I/O status, hours powered and hours
running
Ambient: 32ºF (0ºC) to 104ºF (40ºC), 3300
ft (1000m) altitude, 90% humidity, noncondensing
Closed loop vector control
RS-485 Serial Interface
On/Off line PC programming with
SUPERDRIVE
Fieldbus Comm: Profibus DP, DeviceNet or
Modbus RTU (Requires optional RS-232 or
RS-485 Interface), Ethernet TCP/IP
Encoder buffered output
Additional digital and analog I/O
Dynamic Braking capabilities for all models
Variable Frequency Drives
101
www.pamensky.com
CFW 09 Shark - Table of Products
220-230V
Electrical Data
Current
(A)
CT
VT
6
7
10
16
Built-In
Dynamic
Braking
Yes
Yes
Yes
Yes
Mechanical Data
Maximum Applicable Motor
Constant Torque
Variable Torque
HP
KW
HP
KW
1.5
2
3
5
1.1
1.5
2.2
3.7
1.5
2
3
5
1.1
1.5
2.2
3.7
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
WEG Part Number
List
Price
1
1
1
2
10
10
10
15
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
14.2 x 9.2 x 8.5
14.2 x 9.2 x 8.5
14.2 x 9.2 x 8.5
16.2 x 10.2 x 8.5
CFW090006T2223EON4Z
CFW090007T2223EON4Z
CFW090010T2223EON4Z
CFW090016T2223EON4Z
$2,660
2,782
2,906
3,276
380-480V
Electrical Data
Current
(A)
CT
VT
3.6
4
5.5
9
13
16
Notes:
Built-In
Dynamic
Braking
Yes
Yes
Yes
Yes
Yes
Yes
Mechanical Data
Maximum Applicable Motor
Constant Torque
Variable Torque
HP
KW
HP
KW
2
2
3
5
7.5
10
1.5
1.5
2.2
3.7
5.5
7.5
2
2
3
5
7.5
10
1.5
1.5
2.2
3.7
5.5
7.5
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
WEG Part Number
List
Price
1
1
1
2
2
2
10
10
10
15
15
15
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
14.2 x 9.2 x 8.5
14.2 x 9.2 x 8.5
14.2 x 9.2 x 8.5
16.2 x 10.2 x 8.5
16.2 x 10.2 x 8.5
16.2 x 10.2 x 8.5
CFW090003T3848EON4Z
CFW090004T3848EON4Z
CFW090005T3848EON4Z
CFW090009T3848EON4Z
CFW090013T3848EON4Z
CFW090016T3848EON4Z
$2,782
2,854
2,980
3,114
3,300
3,980
The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/
or from other manufacturers, specify the VFD through the motor rated current.
Variable Frequency Drives
1.13
www.pamensky.com
101
CFW 09 - Accessories
Dynamic Braking
Description
External Dynamic Braking Module for 180A Model (16 X 9 X 10 NEMA 1 Enclosure)
External Dynamic Braking Module for 211 & 240A Models (16 X 9 X 10 NEMA 1 Enclosure)
External Dynamic Braking Module for 312, 361,450,515, & 600A Models (16 X 9 X 10 NEMA 1 Enclosure)
External Dynamic Braking Module for 107,147,211,& 247A Models at 575V (16 X 9 X 10 NEMA 1 Enclosure)
External Dynamic Braking Module for 315 & 343A Models at 575V (16 X 9 X 10 NEMA 1 Enclosure)
External Dynamic Braking Module for 418 & 472 Amp Models at 575V (16 X 9 X 10 NEMA 1 Enclosure)
Part Number
List Price
DBW01.0165D21801SZ
DBW01.0240D21801SZ
DBW01.0300D21801SZ
DBW02.0210D50691SZ
DBW02.0300D50691SZ
DBW02.0380D50691SZ
$2,120
2,590
3,159
3,893
5,133
6,363
Part Number
List Price
HMI-CFW09LCD
HMI-CFW09LCD N4
KMR CFW09
TCL CFW09
$207
268
91
29
Part Number
List Price
CFW09HMI091
CFW09HMI092
CFW09HMI093
CFW09HMI095
CFW09HMI097
CFW09HMI0910
$31
39
50
75
88
108
Part Number
List Price
KSD CFW09
KCS CFW09
KFB-PD
KFB DN
KFB EN
$161
86
1,045
897
1,562
Part Number
List Price
CFW09CAP1500
CFW09CAP4700
$240
280
Keypads
Description
Standard Keypad with LED & LCD
NEMA 4/IP56 Remote Keypad with LED & LCD
Remote Keypad FRAME KIT
Blank Keypad with Power & Error LED’s
Keypad Cables
Description
1m (3.3 ft) Remote Keypad Cable
2m (6.6 ft) Remote Keypad Cable
3m (10 ft) Remote Keypad Cable
5m (16 ft) Remote Keypad Cable
7.5m (25 ft) Remote Keypad Cable (Requires CFW09KMR09)
10m (33 ft) Remote Keypad Cable (Requires CFW09KMR09)
Communication
Description
SUPERDRIVE PC Communication Kit (includes software & hardware accessories)
RS-232 Serial Interface
Profibus DP Communication Kit
DeviceNet Communication Kit
Ethernet IP Communication Kit (V3.70 or higher)
* Modbus RTU –requires optional RS-232 or RS-485 interface.
Caps
Description
External DC Bus Cap Kit 1500uF (includes bleeder resistor, mounting bracket, & screws)
External DC Bus Cap Kit 4700uF (includes bleeder resistor, mounting bracket, & screws)
1.14
Variable Frequency Drives
101
www.pamensky.com
CFW 09 - Accessories
I/O Expansion Boards
Description
I/O Exp. Board A with Encoder Input, Encoder Output, RS-485 Serial Interface, I4 bit A/D, I4 bit D/A’s, Digital
Inputs and Outputs + Thermistor (PTC) Input
I/O Exp. Board A with RS-485 Serial Interface, Digital Inputs and Outputs + Thermistor (PTC) Input
I/O Exp. Board A with I4 bit A/D, I4 bit D/A’s, Digital Inputs and Outputs + Thermistor (PTC) Input
I/O Exp. Board B with Encoder Input, Encoder Output, RS-485 Serial Interface, Isolated Analog Input, Isolated
Analog Outputs, Digital Inputs and Outputs + Thermistor (PTC) Input
I/O Exp. Board B with Encoder Input with internal Power Supply - 12VDC, Digital Inputs and Outputs + Thermistor
(PTC) Input
I/O Exp. Board B with Isolated Analog Input, Isolated Analog Outputs, Digital Inputs and Outputs + Thermistor
(PTC) Input
I/O Exp. Board B with Encoder Input, 5V Power Supply for Encoder, Buffered Outputs for Encoder Signals, RS485 Serial Port, 24V Digital Input, 2 X 24V DC Digital Outputs, 0…10V/4-20mA Analog Input, 2 X 4-20mA Analog
Outputs and PTC Thermistor Input
I/O Exp. Board B with 2 X 4-20mA Analog Outputs
I/O Exp. Board C with Encoder Input, 5-15VDC External Power Supply
I/O Exp. Board C with Encoder Input with internal Power Supply - 12VDC
I/O Exp. Board E with RS-485 Serial Interface, Digital or Thermistor (PTC) Input
PLC/Motion Control Board
PLC/Motion Control Board with Communication Capabilities
Part Number
List Price
EBA.01 CFW09
$1,414
EBA.02 CFW09
EBA.03 CFW09
334
654
EBB.01-CFW09
1,192
EBB.02-CFW09
561
EBB.03-CFW09
667
EBB.04-CFW09
1,487
EBB.05-CFW09
EBC1.01 CFW09
EBC1.02 CFW09
EBC1.03 CFW09
EBE.01 CFW09
PLC1.01
PLC2.00
435
194
504
523
192
957
1,148
Part Number
List Price
CFW09KMFM3
CFW09KMFM4
CFW09KMFM5
CFW09KMFM6
CFW09KMFM7
CFW09KMFM8
$16
20
22
22
22
28
Through Surface Mounting
Description
Kit for Through Surface Mounting - Size 3
Kit for Through Surface Mounting - Size 4
Kit for Through Surface Mounting - Size 5
Kit for Through Surface Mounting - Size 6
Kit for Through Surface Mounting - Size 7
Kit for Through Surface Mounting - Size 8
Variable Frequency Drives
1.15
www.pamensky.com
101
CFW 09 - Technical Data
Three-phase:
Frequency
Phase Unbalance
Cos (Displacement Power Factor)
50 / 60 Hz +/- 2 Hz (48 ... 62 Hz)
Up to 3%
Greater Ihan 0.98 at full load
NEMA 1/IP20 (sizes 1...8 and 8E), IP20 (sizes 9,10 and 10E)
NEMA 4X / IP56 (modules up to 10HP)
Plastic Cover - Light Gray PANTONE 413 C (sizes 1 and 2)
Metallic Cover and Sides - Light Gray RAL 7032 (sizes 3 to 10)
Base - Dark Gray RAL 7022 (sizes 3 to 10)
Switched Mode Power Supply Fed from the DC Link
32 bit RISC Technology
SVM Sine wave PWM (Space Vector Modulation)
Software Implemented Current flux and Speed Regulators (Full DigitaI)
V/F
Sensorless Vector (without encoder)
Vector with Encoder
1.25 / 2.5 / 5.0 / 10 kHz
0...1020 Hz for V / Hz Control
0...408 Hz for Vector Control
150% for 60 seconds every 10 minutes
180% for 1 second every 10 minutes
Greater than 97% at full load
Regulation (with Slip Compensation) : 1% 01 Motor Rated Speed
V / F Mode
Resolution: 1 rpm (Keypad Reference)
Speed Regulation Range: 1: 20
Regulation: 0.5% of Motor Rated Speed
Sensorless
Resolution: 1 rpm (Keypad Reference)
Vector Mode
Speed Regulation Range: 1:100
Regulation with:
10 bit Analogy Reference: +1- 0.1% 01 Motor Rated Speed
Encoder Vector
14 bit Analogy Reference: +- 0.01% 01 Motor Rated Speed
Mode
Digital Reference (Ex: Keypad): + / - 0.01 % of Motor Rated Speed
Speed Regulation Range: Down to 0 rpm
Regulation: + - 10% of Motor Rated Torque
Vector Modes
Range: O ... 150% 01 Motor Rated Torque
2 Programmable Differential Input (10 bit) : 0...10 V 0...20 mA or 4...20 mA
1 Programmable Bipolar Input (14 bit): -10 ... + 10 V 0...20 mA or 4...20 mA
1 Programmable Isolated Input (10 bit) : O ... 10 V 0...20 mA or 4...20 mA
6 Programmable Isolated Input: 24 Vdc
1 Programmable Isolated Input: 24 Vdc
1 Programmable Isolated Input: 24 Vdc (for Motor PTC Thermistor)
1 Isolated Differencial Encoder Signals Output: 5 ...15 Vdc External Power Supply
RS-232 with KCS-GFW09 Kn - RS-485 Isolated with EBA or EBB Board
Johnson Contols-N2 (optional)
Modbus RTU Standard, Profibus DP, DeviceNet, EtherNet / IP, DeviceNet Drive Profile with KFB kits.
DC Link Under Voltage
Output Short Circuit
DC Link Over Voltage
Output Ground Fault
Drive Over Temperature
External Fault
Motor Over Temperature
SeIf -diagnosis Fault
Output Over Current
Programming Error
Motor Overload (i x t)
Serial Communication Fault
Dynamic Braking Resistor Overload Motor or Encoder Connection Fault
CPU / EPROM Error ( watchdog) Power Supply Ohase Fault (30 A and above models)
Encoder Fault
Keypad Connection Fault
0ºC (32ºF)...40ºC (104ºF), up to 50ºC (122ºF) with 2% / ºC (1,1% / ºF) output current derating
5...90% Non Condensing
0...1000m (3300ft), up to 4000m (13100ft) with 10% / 1000m (3% / 1000ft) output current derating
Electromagnetie Compatible - Industrial Environment - EMC - Emission and Immunity
Low Voltage Directive
Semiconductor drive
Power Conversion Enuinment
Electronic Equipment for Use in Power Installations
Safety Requirements for Electrical Equipament for Measurement Control and laboratory Use
Underwriters laboratories Ine. USA
Phoenix Test-Lab GmbH – Germany (Competent Body)
Instituto Argentino de Normalización
Australian Communications Aulhority
Power Supply
Degree of Protection
Enclosure
Finishing Color
Power Supply
Microprocessor
PWM Technique
Control Modes
Control
Switching Frequency
Frequency Range
Overload Capacity
Efficiency
Speed Control
Performance
Torque Control
Analog
Control Inputs
Digital
Encorder
Communication
Serial
Fieldbus
Safety
Ambient
Conformities
Certifications
1.16
220-230 V: 220/230 V (+10% -15%)
380-480 V: 380/400/415/440/460/480 V (+10% - 15%)
500-600 V: 525/575/600 V (+10% - 15%)
500-690 V: 525/575/600 (+10% - 15%) /690 V
Voltage
Protections
Temperature
Humidity
Altitude
EMC Directive 89 / 336 / EEC - EM 61800-3
LVD 73 / 23 / EEC
IEC 146
UL 508C
EN 50178
EN 61010
UL (USA) and cUL (CANADA)
CE (EUROPE)
IRAM (ARGENTINA)
C-Tiek (AUSTRALIA) 2250/1132383
Variable Frequency Drives
101
www.pamensky.com
CFW 09 - Technical Data
Programming
Controls
Keypad
Monitoring
Control Features Standard
General Drive Functions Programming
Start/Stop , Increase/Decrease Speed, JOG, FWD/REV and Local/Remote
Speed Reference (rpm)
Oulput Current (A)
Motor Speed (rpm)
Oulput Voltage (Vac)
Speed Proportional Value (Ex: ft/min)
Drive Status
Output Frequency (Hz)
Digital Inputs Status
DC Link Voftage (Vdc)
Transistor Outputs Status
Motor Torque (%)
Relay Outputs Status
Outout Power (kW)
Analog Inputs Value
Hours Powered Up (h)
Four Last Faults
Hours Enabled (h)
Fault Messages
Keypad wilh LCD + LED displays (HMI-CFW09-LCD)
Password to protect drive programming
LCD display language selection: English, Spanish and Portuguese
Control mode selection (via parameter}: V / F. Sensorless Vector or Vector with Encoder
Fault auto-diagnosis and auto-reset
Parameters reset to factory or user default
Drive Self-tuning to motor and load (Vector Modes)
Specific unit indication ( Ex: l/s, t/h, %, etc. )
Motor slip compensation (V / F Mode)
Manual and automatic Torque Boost (V / F Mode)
Adjustable V / F Curve (V / F Mode)
Minimum and maximum speed limits
Output current limit
Adjustable motor overload protection
Digital gain and offset adjustments for the analog inputs
Digital gain adjustment for the analog outputs
JOG function
JOG + I JOG - Function (momentary speed increase/decrease)
COPY Function (Drive to Keypad or Keypad to Drive)
Comparison functions for lhe digital outputs: N* > Nx; N > Nx; N < Nx; N = O; N = N*; Is > Ix ; Is < Ix; T > Tx and T < Tx
Where: N = Motor speed; N* = Speed reference; Is = Output Current and T = Motor torque
Linear and S independent acceleration and deceleration ramps, two sets of ramps
DC Braking
Optimal Braking (Vector Modes)
Built-in dynamic braking transistor – Models up to 45A/220-230V and up to 30A/380-480V and up to 14A/500-600V
Multi-speed function (up to 8 preset speeds)
Speed Profiling function
Hour meter and Wattrneter
Overlapping PID Regulator (for automatic control of level, pressure, flow, etc. )
FWD I REV selection
Local I Remate operation selection
Flying Start function (restart with the motor spinning)
Skip Speed (critical speed rejection)
Ride-Through (operation during momentary power loss)
Built-in dynamic braking transistor:
Models: 6 ... 45 A / 220 - 230 V and 36 ... 30 A / 380 - 480 V
FieldBus communication: Modbus RTU built-in
Variable Frequency Drives
1.17
www.pamensky.com
101
CFW 10 - Variable Frequency Drive
The WEG CFW 10 VFD provides a robust drive
solution in a compact, easily mounted package.
A simplified keypad and bright LED readout,
complete diagnostics and fully programmable
I/O makes the CFW 10 an ideal control device
when requiring an economical drive solution for
small motors.
Standard Features
Applications
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
V/Hz control
IP20 finger safe enclosure
Single Phase 110-127V input voltage up to
1 HP
Single Phase 200–240V input voltage up to
3 HP
150% current overload capacity
DSP controlled PWM output
2.5-15 kHz adjustable switching frequency
Four isolated programmable digital inputs
Programmable relay output
One isolated programmable analog input
Diagnostic features: Over current, motor
overload, drive over temperature, output short
circuit, DC bus over and under voltage and
external fault
Control features: Linear and S-Ramp
acceleration and deceleration, local / remote
control, DC braking, torque boost, motor slip
compensation, electronic pot, preset speeds,
minimum and maximum adjustable frequency
limits, adjustable output current limit, JOG
Display readings: Motor speed, frequency,
voltage, current, last 3 faults, heatsink
temperature and drive status, DC link voltage
Ambient: 122°F (50°C), 3300 ft (1000 m)
altitude, 90% humidity, non-condensing
1.18
Pumps
Fans/Blowers
Blowers
Conveyors
Rollout tables
Variable Frequency Drives
101
www.pamensky.com
CFW-10 - Part Number Specification
CFW10
0040
S
2024
E
O
--
--
--
--
Z
1
2
3
4
5
6
7
8
9
10
11
1.
CFW-10 Variable Frequency Drive
2.
Output Rated Current
3.
Power Supply:
S = single-phase
4.
Power Supply Voltage:
1112 = 110-127 V (Single-phase only)
2024 = 200-240 V
5.
Language:
P = Portuguese
E = English
S = Spanish
110-127V
200-240V
0016 = 1.6 A
0026 = 2.6 A
0040 = 4.0 A
0016 = 1.6A
0026 = 2.6A
0040 = 4.0A
0073 = 7.3A
0100 = 10.0A
* Selection Table for 2
6.
Product Version:
S = Standard
O = With options
7.
Control Card:
blank = Standard
CL = clean
PL = plus (with potentiometer)
8.
EMC Built-in Filter:
blank = (not avaliable)
FA = with EMC filter (class A) –
Only for single-phase models (200-240V) models
9.
Special Hardware:
Blank = not provided
Hx = special hardware in version X
CP = Cold Plate heatsink version
10.
Special Software:
Blank = not provided
Sx = special software in version X
11.
End of Part Number:
Z
Example:
CFW100040S2024ESZ
Variable Frequency Drives
1.19
www.pamensky.com
101
CFW 10 - Table of Products
110-127V - Single Phase
Electrical Data
Current
(A)
Motor
(HP)
1.6
2.6
4.0
0.25
0.5
1
Mechanical Data
Frame
Weight
(lb)
1
1
2
2.0
2.0
3.3
200-240V - Single Phase
Electrical Data
Degree of Protection
WEG Part Number
List Price
IP20
IP20
IP20
5.20 x 3.74 x 4.76
5.20 x 3.74 x 4.76
6.34 x 4.53 x 4.80
CFW100016S1112ESZ
CFW100026S1112ESZ
CFW100040S1112ESZ
$401
432
656
Mechanical Data
Current
(A)
Motor
(HP)
Frame
Weight
(lb)
1.6
2.6
4
7.3
10
0.25
0.5
1
2
3
1
1
1
2
3
2.0
2.0
2.0
3.3
4.0
Notes:
Purchasing Data
Dimensions
H x W xD (in)
Purchasing Data
Degree of Protection
Dimensions
(in)
WEG Part Number
List Price
IP20
IP20
IP20
IP20
IP20
5.20 x 3.74 x 4.76
5.20 x 3.74 x 4.76
5.20 x 3.74 x 4.76
6.34 x 4.53 x 4.80
7.46 x 4.53 x 4.80
CFW100016S2024ESZ
CFW100026S2024ESZ
CFW100040S2024ESZ
CFW100073S2024ESZ
CFW100100S2024ESZ
$349
375
385
571
680
The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/
or from other manufacturers, specify the VFD through the motor rated current.
CFW 10 - Technical Data
Single phase
Single phase
50 / 60Hz +/- 2Hz
Greater than 0.98
IP20
Linear or Quadratic V/Hz
16 bit DSP
Voltage
Power Supply
Enclosure
Control
Control Inputs
Control Ouput
Safety
Ambient
Frequency
Cos (Displacement Power Factor)
Degree of Protection
Control Mode
Power Output
Sinusoidal PWM (Space Vector
Modulation)
Switching Frequency
IGBT Transistors 2.5, 5, 10 or 15kHz
Frequency Range
2.5…15kHz Switching Frequency
Overload Capacity
0-300 Hz
4 programmable isolated digital
150% during 60 sec. every 10 min.
outputs
1 programmable differential analog input: 0-10V, 0-20mA or 4-20mA
1 programmable realy outputs, one reversing (Form C) contact: 250V / 0.5A
Motor over current
DC link over voltage
Motor overload
DC link under voltage
output phase-to-phase short circuit
Drive over temperature
Protections
output phase-to-ground short circuit
external fault
programming error
Temperature
0…104F (40ºC), up to 122ºF (50ºC) with 2% / 1.8ºF (1ºC) output current derating
Humidity
5…90% Non Condensing
0…3300 ft (1000m), up to 13,200 ft (4000m) with 10% / 3300ft (1000m) output
Altitude
current derating
EMC Directive 89 / 336 / EEC
Conformities
Special Functions
Keypad
Mounting
1.20
110…127V (+10%, -15%)
200…240V (+10%, -15%)
Electromagnetic compatibility – Industrial Environment EMC – Emission and Immunity
ENC61800-3
LVD 73/23/EEC
Low Voltage Directive
UL 508 C
Power Conversion Equipment
Linear and “S” ramp accel and decel, local/remote control, FWD/REV selection, DC braking, manual and auto torque
boost, motor slip compensation, electronic pot, two skip frequencies, maximum and minimum adjustable frequency limits,
adjustable output current limit, 8 present speeds and JOG.
3 digit display, 2 indication LEDs and 4 keys
Readouts for: output freqency (Hz), output current (A), output voltage (V), value proportional to frequency (Ex: RPM),
heatsink temperature, fault and status messages.
Surface with screws
Variable Frequency Drives
101
www.pamensky.com
CFW 11 - System Variable Frequency
ency Driv
Drive
The WEG CFW 11 inverters use Plug and Play technology
to recognize and configure accessories providing easy and
safe operation. Programming is simpler using the standard
USB port. Soft PLC lets the user create functions without
the need for an external PLC.
Standard Features
Standard Features - cont.
•
•
•
•
•
•
•
•
•
•
•
Plug and play philosophy (connect and
use) enables quick and easy installation of
accessories and options
USB for computer connection for using
SUPERDRIVE G2 programming and
monitoring software
Human-Machine Interface (HMI) with backlit
graphic display and soft-keys, greatly
facilitates inverter programming and operation
DC link inductors (symetrically connected
to positive and negative DC link terminals)
enable compliance with IEC61000-3-12
standard requirements regarding harmonics,
(no need for external line reactance)
Intelligent thermal management enables full
protection of IGBTs, monitoring of heatsink
and internal air temperature
Automatic control of the heatsink fan with
speed sensor (additional protection) and
easily detachable from the unit for cleaning
and maintenance
Normal Duty and Heavy Duty ratings to adapt
optimally to all kinds of loads
Protection with failure and alarm warnings
Motor overload protection in compliance with
IEC 60947-4-2/UL 508 C
On board memory allows user to create
functions without the need to use an external
PLC (soft-PLC via IEC61131-3 programming
software)
•
•
Guided start-up simplifies initial user
programming.
Real time clock
TRACE / SCOPE function to assist with
the start-up and system diagnostics via
SUPERDRIVE G2
Optional Features
•
•
•
•
•
•
•
•
•
•
•
•
•
Interface for incremental encoder 5 to 12Vdc
Interface for RS-485 serial communication
(modbus)
Interface for RS-232C serial communication
CAN interface
Profibus DP interface
PLC functions; IEC programming
Devicenet 4 interface
Ethernet IP interface
Blind cover for slot HMI
Frame for remote HMI
Conduit kit
Optimal Braking®
IP20
Factory Options
•
•
•
Safety Stop
RFI Filter
24 VDC power input option for control section
Variable Frequency Drives
1.21
www.pamensky.com
101
CFW-11 - Part Number Specification
CFW11
-
0016
T
4
S
--
--
--
--
--
--
--
--
Z
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1.
CFW-11 Variable Frequency Drive
2.
Type of Construction:
Blank = Inverter in cabinet
M = Inverter with modular construction to meet elevated powers, “modular drive” line
3.
Output Rated Current
4.
Power Supply:
S = single-phase
T = three-phase
B = single-phase or three-phase
5.
Power Supply Voltage:
2 = 200-240 V
4 = 380-480 V
5 = 500-600 V
6 = 660-690 V
6.
Product Version:
S = Standard
O = With options
7.
Enclosure:
Blank = factory standard
Sizes A, B and C: IP21
D: Nema 1/IP20
N1 = Nema 1
21 = IP21
220-240V
* Selection Table for 2
8.
HMI - Human Machine
Interface:
blank = standard (with HMI of LED´S + LCD)
IC = Without HMI
9.
Braking:
blank = standard
(Sizes A, B, C and D: built-in braking IGBT)
F = Standard product including Brake Chopper
DB = Dynamic Braking (Factory Option)
10.
RFI Filter (Not
Applicable to CFW-11M
Models):
Blank = standard
FA = Category C3 internal RFI filter
11.
Safety Stop:
Blank = standard (without safety stop function)
Y = with safety stop function according to EN-954-1 category 3
12.
External Electronic
4 Vdc
Supply 24
icable to
(not applicable
models CFW-11M):
Blank = factory standard:
model CFW-11 (without) ; model CFW-11M (with)
12.
Special Hardware:
Blank = factory standard (without)
H1 = special hardware nr. 1
13.
Special Software:
Blank = factory standard (without)
S1 = special software nr. 1
14.
art Number:
End of Part
Z
Example::
CFW110016T4SZ
1.22
380-480V
0007 = 7 A
0003 = 3 A
0005 = 5 A
0010 = 10 A
0013 = 13 A
0007 = 7 A
0016 = 16 A
0010 = 10 A
0013 = 13 A
0024 = 24 A
0028 = 28 A
0017 = 17 A
0033 = 33 A 0024 = 24 A
0045 = 45 A 0031 = 31 A
0054 = 54 A 0038 = 38 A
0070 = 70 A 0045 = 45 A
0086 = 86 A 0058 = 58 A
0105 = 105 A 0070 = 70 A
0142 =142 A 0088 = 88 A
0180 = 180 A 0105 = 105 A
0211 = 211 A 0142 = 142 A
Variable Frequency Drives
0180 = 180 A
0211 = 211 A
0242 = 242 A
0312 = 312 A
0370 = 370 A
0477 = 477 A
0515 = 515 A
0601 = 601 A
0720 = 720 A
500-690V
0002 = 2.9 A 0150 = 150 A
0004 = 4.2 A 0170 = 170 A
0007 = 7 A
0216 = 216 A
0010 = 10 A 0289 = 289 A
0012 = 12 A 0315 = 315 A
0017 = 17 A 0365 = 365 A
0022 = 22 A 0435 = 435 A
0027 = 27 A
0032 = 32 A
0044 = 44 A
0053 = 53 A
0063 = 63 A
0080 = 80 A
0107 = 107 A
0125 = 125 A
101
www.pamensky.com
CFW 11 - Table of Products
200-240V - Single Phase
Electrical Data
Current
(A)
ND*
HD*
6
7
10
5
7
10
Built-In
Dynamic
Braking
Yes
Yes
Yes
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
1.5
2
3
1
2
3
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
A
A
A
12.6
12.6
13.4
NEMA 1
NEMA 1
NEMA 1
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
CFW110006B2ON1Z
CFW110007B2ON1Z
CFW110010S2ON1Z
$1,936
1,996
2,117
200-240V - Three Phase
Electrical Data
Current
(A)
ND*
HD*
6
7
7
10
13
16
24
28
33.5
45
54
70
86
105
142
180
211
5
7
5.5
8
11
13
20
24
28
36
45
56
70
86
115
142
180
Built-In
Dynamic
Braking
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
1.5
2
2
3
4
5
7.5
10
12.5
15
20
25
30
40
50
60
75
1
2
1.5
2
3
4
6
7.5
10
12.5
15
20
25
30
40
50
60
ND*
HD*
3.6
5
7
10
13.5
17
24
31
38
45
58.5
70.5
88
105
142
180
211
242
312
370
477
515
601
720
3.6
5
5.5
10
11
13.5
19
25
33
38
47
61
73
88
115
142
180
211
242
312
370
477
515
560
Built-In
Dynamic
Braking
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
A
A
A
A
A
A
B
B
B
C
C
C
D
D
E
E
E
12.6
12.6
12.6
12.6
13.4
13.9
20.1
20.1
20.1
41.7
41.7
41.7
71.7
71.7
143.3
143.3
143.3
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
13.82 x 7.45 x 8.94
13.82 x 7.45 x 8.94
13.82 x 7.45 x 8.94
17.64 x 8.66 x 11.51
17.64 x 8.66 x 11.51
17.64 x 8.66 x 11.51
19.82 x 11.81 x 12.00
19.82 x 11.81 x 12.00
26.60 x 13.20 x 14.10
26.60 x 13.20 x 14.10
26.60 x 13.20 x 14.10
CFW110006B2ON1Z
CFW110007B2ON1Z
CFW110007T2ON1Z
CFW110010T2ON1Z
CFW110013T2ON1Z
CFW110016T2ON1Z
CFW110024T2ON1Z
CFW110028T2ON1Z
CFW110033T2ON1Z
CFW110045T2ON1Z
CFW110054T2ON1Z
CFW110070T2ON1Z
CFW110086T2SZ
CFW110105T2SZ
CFW110142T2ON1Z
CFW110180T2ON1Z
CFW110211T2ON1Z
$1,936
1,996
1,851
1,967
2,047
2,203
2,740
2,794
3,182
3,583
4,410
5,139
6,514
8,369
12,249
17,051
21,840
Notes:
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
2
3
4
6
7.5
10
15
20
25
30
40
50
60
75
100
150
150
200
250
300
400
450
500
600
2
3
3
6
6
7.5
12.5
15
20
25
30
40
50
60
75
100
150
150
200
250
300
400
450
450
* ND - Normal Duty
•
110% during 60 seconds every 10 minutes
•
150% during 3 seconds every 10 minutes
Purchasing Data
Frame
380-480V - Three Phase
Electrical Data
Current
(A)
Purchasing Data
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
A
A
A
A
A
B
B
B
C
C
C
D
D
E
E
E
E
F
F
F
F
G
G
G
5.7
5.9
5.9
6.1
6.3
9.1
9.7
10.4
18.9
18.9
18.9
32.5
32.5
143.3
143.3
143.3
143.3
308.6
308.6
308.6
308.6
474.0
474.0
474.0
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
IP20
IP20
IP20
IP20
IP20
IP20
IP20
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
12.04 x 5.71 x 8.94
13.82 x 7.45 x 8.94
13.82 x 7.45 x 8.94
13.82 x 7.45 x 8.94
17.64 x 8.66 x 11.51
17.64 x 8.66 x 11.51
17.64 x 8.66 x 11.51
19.82 x 11.81 x 12.00
19.82 x 11.81 x 12.00
26.60 x 13.20 x 14.10
26.60 x 13.20 x 14.10
26.60 x 13.20 x 14.10
26.60 x 13.20 x 14.10
48.58 x 16.93 x 14.17
48.58 x 16.93 x 14.17
48.58 x 16.93 x 14.17
48.58 x 16.93 x 14.17
49.76 x 21.06 x 16.77
49.76 x 21.06 x 16.77
49.76 x 21.06 x 16.77
CFW110003T4ON1Z
CFW110005T4ON1Z
CFW110007T4ON1Z
CFW110010T4ON1Z
CFW110013T4ON1Z
CFW110017T4ON1Z
CFW110024T4ON1Z
CFW110031T4ON1Z
CFW110038T4ON1Z
CFW110045T4ON1Z
CFW110058T4ON1Z
CFW110070T4SZ
CFW110088T4SZ
CFW110105T4ON1Z
CFW110142T4ON1Z
CFW110180T4ON1Z
CFW110211T4ON1Z
CFW110242T4SZ
CFW110312T4SZ
CFW110370T4SZ
CFW110477T4SZ
CFW110515T4SZ
CFW110601T4SZ
CFW110720T4SZ
$1,903
2,024
2,091
2,161
2,265
2,745
3,324
4,120
4,542
5,725
7,093
7,723
9,302
10,388
12,218
17,914
20,837
21,719
25,735
26,893
33,217
38,456
43,866
48,740
* HD - Heavy Duty
•
150% during 60 seconds every 10 minutes
•
200% during 3 seconds every 10 minutes
The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/
or from other manufacturers, specify the VFD through the motor rated current.
Variable Frequency Drives
1.23
www.pamensky.com
101
CFW 11 - Table of Products
500-600V - Three Phase
Electrical Data
Current
(A)
ND*
HD*
2.9
4.2
7.0
10
12
17
2.7
3.8
6.5
9.0
10
17
Built-In
Dynamic
Braking
Standard
Standard
Standard
Standard
Standard
Standard
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
2
3
5
7.5
10
15
2
3
5
7.5
10
15
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
B
B
B
B
B
B
20.1
20.1
20.1
20.1
20.1
20.1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
12.4 x 7.5 x 8.9
12.4 x 7.5 x 8.9
12.4 x 7.5 x 8.9
12.4 x 7.5 x 8.9
12.4 x 7.5 x 8.9
12.4 x 7.5 x 8.9
CFW110002T5ON1NFZ
CFW110004T5ON1NFZ
CFW110007T5ON1NFZ
CFW110010T5ON1NFZ
CFW110012T5ON1NFZ
CFW110017T5ON1NFZ
$2,818
2,895
3,074
3,128
3,283
3,412
500-690V - Three Phase
Electrical Data
Current
(A)
ND*
HD*
22
27
32
44
53
63
80
107
125
150
170
216
289
315
365
435
19
22
27
36
44
53
66
90
107
122
150
180
240
289
315
357
Built-In
Dynamic
Braking
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Standard
Standard
Standard
Standard
Standard
Standard
Notes:
1.24
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
20
25
30
40
50
60
75
100
125
150
150
200
300
300
350
450
15
20
25
30
40
50
60
75
100
125
150
200
250
300
300
350
* ND - Normal Duty
•
110% during 60 seconds every 10 minutes
•
150% during 3 seconds every 10 minutes
Purchasing Data
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
D
D
D
D
E
E
E
E
E
E
F
F
F
G
G
G
75
75
75
75
141
141
141
141
141
141
370
370
370
569
569
569
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
IP20
IP20
IP20
IP20
IP20
IP20
21.7 x 11.8 x 12.0
21.7 x 11.8 x 12.0
21.7 x 11.8 x 12.0
21.7 x 11.8 x 12.0
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
48.6 x 16.9 x 14.2
48.6 x 16.9 x 14.2
48.6 x 16.9 x 14.2
49.8 x 21.1 x 16.8
49.8 x 21.1 x 16.8
49.8 x 21.1 x 16.8
CFW110022T6ONBZ
CFW110027T6ONBZ
CFW110032T6ONBZ
CFW110044T6ONBZ
CFW110053T6ON1NBYZ
CFW110063T6ON1NBYZ
CFW110080T6ON1NBYZ
CFW110107T6ON1NBYZ
CFW110125T6ON1NBYZ
CFW110150T6ON1NBYZ
CFW110170T6ONBYZ
CFW110216T6ONBYZ
CFW110289T6ONBYZ
CFW110315T6ONBYZ
CFW110365T6ONBYZ
CFW110435T6ONBYZ
$5,072
5,410
6,672
7,894
10,572
10,823
11,872
14,863
18,128
24,863
25,820
31,612
38,746
43,846
57,147
61,689
* HD - Heavy Duty
•
150% during 60 seconds every 10 minutes
•
200% during 3 seconds every 10 minutes
The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/
or from other manufacturers, specify the VFD through the motor rated current.
Variable Frequency Drives
101
www.pamensky.com
CFW 11 - Table of Products - Dynamic Braking
200-240V - Three Phase - with Dynamic Braking
Electrical Data
Current
(A)
ND*
HD*
142
180
211
115
142
180
Built-In
Dynamic
Braking
Yes
Yes
Yes
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
50
60
75
40
50
60
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
E
E
E
143.3
143.3
143.3
NEMA 1
NEMA 1
NEMA 1
26.60 x 13.20 x 14.10
26.60 x 13.20 x 14.10
26.60 x 13.20 x 14.10
CFW110142T2ON1DBZ
CFW110180T2ON1DBZ
CFW110211T2ON1DBZ
$13,102
18,232
23,357
380-480V - Three Phase - with Dynamic Braking
Electrical Data
Current
(A)
ND*
HD*
105
142
180
211
88
115
142
180
Built-In
Dynamic
Braking
Yes
Yes
Yes
Yes
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
75
100
150
150
60
75
100
150
ND*
HD*
22
27
32
44
53
63
80
107
125
150
19
22
27
36
44
53
66
90
107
122
Built-In
Dynamic
Braking
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
E
E
E
E
143.3
143.3
143.3
143.3
NEMA 1
NEMA 1
NEMA 1
NEMA 1
26.60 x 13.20 x 14.10
26.60 x 13.20 x 14.10
26.60 x 13.20 x 14.10
26.60 x 13.20 x 14.10
CFW110105T4ON1DBZ
CFW110142T4ON1DBZ
CFW110180T4ON1DBZ
CFW110211T4ON1DBZ
$11,109
13,068
19,155
22,282
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
HD*
HP
HP
20
25
30
40
50
60
75
100
125
150
15
20
25
30
40
50
60
75
100
125
* ND - Normal Duty
•
110% during 60 seconds every 10 minutes
•
150% during 3 seconds every 10 minutes
Notes:
Mechanical Data
Maximum Applicable Motor
ND*
Purchasing Data
Frame
500-690V - Three Phase - with RFI Filter, Safety Stop and Dynamic Braking
Electrical Data
Current
(A)
Purchasing Data
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
D
D
D
D
E
E
E
E
E
E
75
75
75
75
141
141
141
141
141
141
IP20
IP20
IP20
IP20
IP20
IP20
IP20
IP20
IP20
IP20
21.7 x 11.8 x 12.0
21.7 x 11.8 x 12.0
21.7 x 11.8 x 12.0
21.7 x 11.8 x 12.0
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
26.6 x 13.2 x 14.1
CFW110022T6OYZ
CFW110027T6OYZ
CFW110032T6OYZ
CFW110044T6OYZ
CFW110053T6OYZ
CFW110063T6OYZ
CFW110080T6OYZ
CFW110107T6OYZ
CFW110125T6OYZ
CFW110150T6OYZ
$6,248
6,667
8,220
9,727
12,943
13,250
14,545
18,229
22,250
25,541
* HD - Heavy Duty
•
150% during 60 seconds every 10 minutes
•
200% during 3 seconds every 10 minutes
The maximum motor p
power ratings
g listed above are based on WEG 2 and 4 p
pole motors. For motors with different numbers of p
poles ((ie. 6 and 8 p
poles),
), other voltages
g and/
or from
m other manufacturers, specify the VFD through the motor rated current.
Variable Frequency Drives
1.25
www.pamensky.com
101
CFW 11 - Accessories
I/O Expansion
Description
Slot
Part Number
List Price
1
IOA-01
$1,052
1
IOB-01
561
8 Digital Inputs
4 Digital Outputs
(Use with Soft PLC)
1
IOC-01
419
8 Digital Inputs
8 Open Collector Digital Outputs
(Use with Soft PLC)
1
IOC-02
386
5 PTC type temperature sensor Input
5 PT100 type temperature sensor Input
5 KTY84 type temperature sensor Input
1
1
1
IOE-01
IOE-02
IOE-03
626
1,631
809
Slot
Part Number
List Price
Incremental encoder module
5 to 12 Vdc
100 kHz
With encoder signal repeater
2
ENC-01
$461
Incremental encoder module
5 to 12 Vdc
100 kHz
2
ENC-02
404
Slot
Part Number
List Price
3
3
3
3
3
3
4
4
4
4
4
4
4
RS485-01
RS232-01
RS232-02
CAN/RS485-01
CAN-01
PROFIBUS DP-01
PROFDP-05
DEVICENET-05
ETHERNET/IP-05
RS232-05
RS485-05
MODBUSTCP-05
PROFINETIO-05
$212
161
179
453
378
512
1,138
1,138
1,138
277
333
1,680
1,939
Slot
Part Number
List Price
2 14-bit analog inputs in voltage or current
2 digital inputs
2 14-bit analog outputs in voltage or current
2 open collector type digital outputs
2 isolated 12-bit analog inputs
2 digital inputs
2 isolated 11-bit analog outputs in voltage or current
2 open collector type digital outputs
Interface with Encoder
Description
Communication
Description
RS-485 Serial Communication Module (Modbus-RTU)
RS-232C Serial Communication Module (Modbus-RTU)
RS-232C Serial Communication Module (Modbus-RTU) with DIP switch for flash memory prog.
CAN/RS-485 Interface Module (CANopen, DeviceNet and Modbus)
CAN Interface Module (CANopen and DeviceNet)
Profibus DP-V1 Interface Module
Profibus DP Interface Module
DeviceNet Interface Module
EtherNet/IP Interface Module
RS-232 Interface Module (passive) (Modbus-RTU)
RS-485 Interface Module (passive) (Modbus-RTU)
Modbus - TCP/IP interface module
Profinet interface module
PLC Module
Description
PLC functions; Ladder programming; electronic ggearbox; 9 digital inputs; 3 dry-contact digital
outputs; 3 open-collector digital ouputs; 1 analog input (14 bits); 2 analog outputs (14 bits); 2
encoder interfaces; RS-485 Modbus-RTU interface; CAN interface (CANopen, CANopen master/
slave).
1,2,3
PLC11-01
$1,960
PLC functions; Ladder programming; electronic ggearbox; 4 digital inputs; 1 dry-contact digital
outputs; 3 open-collector digital ouputs; 2 encoder interfaces; RS-485 Modbus-RTU interface; CAN
interface (CANopen, CANopen master/slave).
1,2,3
PLC11-02
1,215
1.26
Variable Frequency Drives
101
www.pamensky.com
CFW 11 - Accessories
Keypad Accessories and Cable for HMI
Description
CFW 11 Keypad
Frame for keypad remote assembly, IP56
Blank cover for keypad slot
1m (3.3ft) Remote Keypad Cable
2m (6.6ft) Remote Keypad Cable
3m (10ft) Remote Keypad Cable
5m (16ft) Remote Keypad Cable
7.5m (25ft) Remote Keypad Cable
10m (33ft) Remote Keypad Cable
Part Number
List Price
HMI-01
RHMIF-01
HMID-01
IHM CAB-RS-1M
IHM CAB-RS-2M
IHM CAB-RS-3M
IHM CAB-RS-5M
IHM CAB-RS-7.5M
IHM CAB-RS-10M
$318
60
47
47
52
57
65
78
88
Part Number
List Price
PCSA-01
PCSB-01
PCSC-01
$42
44
47
Part Number
List Price
DBW03
$5,904
Part Number
List Price
KN1A-01
KN1B-01
KN1C-01
$73
86
99
Shielding Kits and Exctractable Mounting Kits
Description
Power cable shielding kit for frame A
Power cable shielding kit for frame B
Power cable shielding kit for frame C
Dynamic Braking
Description
External Dynamic Braking Module
NEMA 1 Kits
Description
NEMA 1 - conduit kit kit for frame A
NEMA 1 - conduit kit kit for frame B
NEMA 1 - conduit kit kit for frame C
Variable Frequency Drives
1.27
www.pamensky.com
101
CFW 11 - Technical Data
Single-Phase
200-240 V: 200/220/230/240 V (+10%/-15%)
200-240 V: 200/220/230/240 V (+10%/-15%)
Voltage and
power range
Three-Phase
Frequency
50 / 60 Hz +-2% (48 to 63 Hz)
Power Supply and
Power Range
380-480 V: 380/400/415/440/460/480 V (+10%/-15%)
500-690 V: 525/575/600/690 V (+10%/-15%)
Displacement factor Greater than 0.98
Efficiency
Greater than 0.97
Voltage
Three Phase, 0 up to power supply voltage
Frequency
0 to 400 Hz
Switching
Frequency
Standard: 5kHz
Options available: 2.5 / 5 / 10 kHz
Normal Duty Cycle
Motor
Overload
Heavy Duty Cycle
Time (ramps)
Acceleration
Deceleration
150% for 1 min every 10min
200% for 3 sec every 10min
0 to 999 seconds
0 to 999 seconds
Speed variation range: 1:20
Regulation: 1% of rated speed
Voltage Vector
(VVW)
Performance
150% for 3 sec every 10min
Regulation: 1% of rated speed
Scalar (V/f)
Sensorless Vector
110% for 1 min every 10min
Speed variation range: 1:30
Speed
Control
Regulation: 0.5% of rated speed
Speed variation range: 1:100
Regulation: +/- 0.01% of rated speed with 14-bit analog input (IOA)
Vector with
Encoder
(with accessory
ENC-01 or ENC02)
Regulation: +/- 0.01% of rated speed with digital reference (keyboard, serial
fieldbus, electronic potentiometer, multispeed)
Regulation: +/- 0.05% of rated speed with 12-bit analog input
Range: 10 to 180%
Torque
Control
Sensorless Vector
Regulation: +/- 5% of rated torque
Range: 20 to 180%
Regulation: +/-10% of rated torque (above 3 Hz)
Digital
6 isolated inputs, 24 Vdc, programmable functions
2 differential inputs isolated by differential amplifier, programmable functions
Inputs
Inputs and
Outputs (I/Os)
in the Standard
Product
Analog
Resolution:
- AI1: 12 bits
- AI2: 11 bits + signal
Signals: (0 to 10) V, (0 to 20) mA or (4 to 20) mA
Impedance:
- 400 kΩ for signal (0 to 10) V
- 500 Ω for signal (0 to 20) mA or (4 to 20) mA
Relay
3 relays with NA/NF (NO/NC) contacts, 240 Vac / 1A, programmable functions
2 isolated outputs, programmable functions
Outputs
Environment
Degree of
Protection
Braking Methods
1.28
Resolution: 11 bits
Analog
Load:
0 to 10 V: RL >= 10 kΩ
0 to 20 mA or 4 to 20 mA: RL < 500Ω
Available supply to user
24 Vdc + -20%, 500 mA
-10 to 50°C for frame Size A,B,C and D; -10 to 45°C for frame Size E and F; -10 to 40°C for frame Size G with 720A
Temperature of
Operation
Up to 60°C with current derating (2% for each 1°C above 50°C)
Humidity
5 to 90% without condensation
Altitude
0 to 1000 meters
Up to 4000 meters with current reduction (1% for every 100 meters above 1000 meters)
IP21
Standard for frame sizes A, B, C. For frame size D the top cover kit has to be added. Frame Sizes E, F and G option not available
IP20
Standard for frame sizes D, E, F and G. Frame Sizes A, B and C the top cover has to be removed.
NEMA1
Standard for frame Size D. Optinal for frame sizes A, B, C, E, F and G
IP54
Frame Sizes 1, 2 and 3
Supply available to user
Rheostatic Braking
External braking resistor (not provided)
Optimal Braking
Does not need braking resistor
DC Braking
Direct current applied to the motor
Variable Frequency Drives
101
www.pamensky.com
CFW 11 - Technical Data
Profibus DP
DeviceNet
PROFIBUS DP-01 (slot 3)
PROFDP-05 (slot 4)
CAN/RS485-01 (slot 3)
CAN-01 (slot 3)
DEVICENET-05 (slot4)
CANopen
CANopen Master/Slave
Communication
EtherNet TCP/IP
CAN/RS485-01 (slot 3)
CAN-01 (slot 3)
PLC11-01 (slot 1/2/3)
ETHERNET/IP-05 (slot 4)
RS485-01
RS485 - ModBus RTU
CAN/RS485-01
RS485-05
RS232 - ModBus RTU
RS232-01
RS232-05
Built-into the standard product
USB
Protections
Safety Standards
Communication with SUPERDRIVE G2 Software
Communication with WLP Software used for programming and monitoring the Soft
PLC function and the PLC11-01 accessory
Overcurrent / short circuit
Under / overvoltage in the power circuit
Phase loss
Overtemperature in the inverter (IGBTs, rectifier and internal air in the electronic cards)
Overtemperature in the motor
Overload in the braking resistor
Overload in the IGBTs
Overload in the motor
Fault / external alarm
Fault in the CPU or memory
Phase-to-ground short circuit at the output
Fault in the heatsink fan
Overspeed of motor
Incorrect connection of encoder
UL 508C
Power conversion equipment
UL 840
Insulation coordination including clearances and creepage distances for electrical equipment
EN 61800-5-1
Safety requirements electrical, thermal and energy
EN 50178
Electronic equipment for use in power installations
EN 60204-1
Safety of machinery.
Electrical equipment of machines.
Part 1: General requirements.
Note: In order to have a machine in conformity with this norm, the machine manufacturer is responsible for the installation of an emergency shutdown device and
an equipment for network sectioning
EN 60146 (IEC 146)
Semiconductor converters
EN 61800-2
Adjustable speed electrical power drive systems
Part 2: General requirements – rating specifications for low voltage adjustable frequency a.c. power drive systems
EN 60529 - Degrees of protection provided by enclosures (IP Code)
Mechanical
Construction Stds. UL 50 - Enclosures for electrical equipment
Electromagnetic
Compatibility
Standards
EN 61800-3 - Adjustable speed electrical power drive systems
Part 3: EMC product standard including specific test methods
EN 55011 - Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM)
radio-frequency equipment
CISPR 11 - Industrial, scientific and medical (ISM)radio-frequency equipment Electromagnetic disturbance characteristics.
Limits and methods of measurement
EN 61000-4-2 - Electromagnetic Compatibility Standards (EMC)
Part 4: Testing and measurement techniques
Section 2: Electrostatic discharge immunity test
EN 61000-4-3 - Electromagnetic Compatibility Standards (EMC)
Part 4: Testing and measurement techniques
Section 3:Radiated, radiofrequency, electromagnetic field immunity test
EN 61000-4-4 - Electromagnetic Compatibility Standards (EMC)
Part 4: Testing and measurement techniques
Section 4: Electrical fast transient / burst immunity test
EN 61000-4-5 - Electromagnetic Compatibility Standards (EMC)
Part 4: Testing and measurement techniques
Section 5: Surge immunity test
EN 61000-4-6 - Electromagnetic Compatibility Standards (EMC)
Part 4: Testing and measurement techniques
Section 6: Immunity to conducted disturbances, induced by radio-frequency fields
Variable Frequency Drives
1.29
www.pamensky.com
101
CFW 11M - Modular Variable Frequency Drive
The CFW 11M is the new generation of WEG frequency inverters for large power ranges. It ranges
from 350 to 2500HP rated at 380-480V / 500-600V / 660-690V with the option for 6 or 12 pulses.
Standard Features
Optional Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Plug and play philosophy (connect and
use) enables quick and easy installation of
accessories and options
USB for computer connection for using
SUPERDRIVE G2 programming and
monitoring software
Human-Machine Interface (HMI) with backlit
graphic display and soft-keys, greatly
facilitates inverter programming and operation
Intelligent thermal management enables full
protection of IGBTs, monitoring of heatsink
and internal air temperature
Automatic control of the heatsink fan with
speed sensor (additional protection) and
easily detachable from the unit for cleaning
and maintenance
Normal Duty and Heavy Duty ratings to adapt
optimally to all kinds of loads
Protection with failure and alarm warnings
Motor overload protection in compliance with
IEC 60947-4-2/UL 508 C
On board memory allows user to create
functions without the need to use an external
PLC (soft-PLC via IEC61131-3 programming
software)
Guided start-up simplifies initial user
programming
Real time clock
TRACE / SCOPE function to assist with
the start-up and system diagnostics with
SUPERDRIVE G2
1.30
•
•
•
•
•
•
•
•
•
Interface for incremental encoder 5 to 12Vdc
Interface for RS-485 serial communication
(modbus)
Interface for RS-232C serial communication
CAN interface
Profibus DP interface
PLC functions; IEC programming
Devicenet 4 interface
Ethernet IP interface
Blind cover for slot HMI
Frame for remote HMI
Conduit kit
Variable Frequency Drives
101
www.pamensky.com
CFW 11M - Specification Table
380-480V - Three Phase
Electrical Data
Current
(A)
Mechanical Data
Maximum Applicable Motor
Normal Duty (ND)
Heavy Duty (HD)
ND*
HD*
HP
KW
HP
KW
600
1140
1710
2280
2850
515
979
1468
1957
2446
500
900
1400
1800
2300
370
700
1050
1400
1750
450
800
1200
1600
2000
330
590
900
1200
1500
Degree of
Protection
IP41
IP41
IP41
IP41
IP41
500-600V - Three Phase
Electrical Data
Current
(A)
Heavy Duty (HD)
ND*
HD*
HP
KW
HP
KW
470
893
1339
1786
2232
418
794
1191
1588
1985
500
900
1400
1800
2300
370
700
1050
1400
1750
400
800
1250
1600
2000
300
590
900
1200
1500
Degree of
Protection
IP41
IP41
IP41
IP41
IP41
660-690V - Three Phase *CE certification only
Electrical Data
Current
(A)
Dimensions (in)
HxWxD
Dimensions (in)
HxWxD
Part Number
90.55 x 55.12 x 31.50
90.55 x 55.12 x 31.50
90.55 x 70.87 x 31.50
90.55 x 78.74 x 31.50
90.55 x 102.36 x 31.50
90.55 x 86.61 x 31.50
90.55 x 86.61 x 31.50
90.55 x 102.36 x 31.50
90.55 x 110.24 x 31.50
90.55 x 125.98 x 31.50
AFW11M0600T4Z
AFW11M1140T4Z
AFW11M1710T4Z
AFW11M2280T4Z
AFW11M2850T4Z
Purchasing Data
6 Pulse
12 Pulse
Dimensions (in)
HxWxD
Dimensions (in)
HxWxD
Part Number
90.55 x 55.12 x 31.50
90.55 x 55.12 x 31.50
90.55 x 70.87 x 31.50
90.55 x 78.74 x 31.50
90.55 x 102.36 x 31.50
90.55 x 86.61 x 31.50
90.55 x 86.61 x 31.50
90.55 x 102.36 x 31.50
90.55 x 110.24 x 31.50
90.55 x 125.98 x 31.50
AFW11M0470T5Z
AFW11M0893T5Z
AFW11M1340T5Z
AFW11M1786T5Z
AFW11M2232T5Z
Mechanical Data
Maximum Applicable Motor
Normal Duty (ND)
12 Pulse
Mechanical Data
Maximum Applicable Motor
Normal Duty (ND)
Purchasing Data
6 Pulse
Heavy Duty (HD)
ND*
HD*
HP
KW
HP
KW
427
811
1216
1622
2028
340
646
969
1292
1615
500
1000
1500
2000
2500
370
750
1100
1500
1850
400
800
1250
1600
2000
300
590
900
1200
1500
Degree of
Protection
IP41
IP41
IP41
IP41
IP41
Purchasing Data
6 Pulse
12 Pulse
Dimensions (in)
HxWxD
Dimensions (in)
HxWxD
Part Number
90.55 x 55.12 x 31.50
90.55 x 55.12 x 31.50
90.55 x 62.99 x 31.50
90.55 x 78.74 x 31.50
90.55 x 94.49 x 31.50
90.55 x 55.12 x 31.50
90.55 x 62.99 x 31.50
90.55 x 102.36 x 31.50
90.55 x 110.24 x 31.50
90.55 x 125.98 x 31.50
AFW11M0427T6Z
AFW11M0811T6Z
AFW11M1217T6Z
AFW11M1622T6Z
AFW11M2028T6Z
Variable Frequency Drives
1.31
www.pamensky.com
101
CFW 11M - Accessories
I/O Expansion
Description
Slot
Part Number
List Price
1
IOA-01
$1,052
1
IOB-01
561
8 Digital Inputs
4 Digital Outputs
(Use with Soft PLC)
1
IOC-01
419
8 Digital Inputs
8 Open Collector Digital Outputs
(Use with Soft PLC)
1
IOC-02
386
5 PTC type temperature sensor Input
5 PT100 type temperature sensor Input
5 KTY84 type temperature sensor Input
1
1
1
IOE-01
IOE-02
IOE-03
626
1,631
809
Slot
Part Number
List Price
Incremental encoder module
5 to 12 Vdc
100 kHz
With encoder signal repeater
2
ENC-01
$461
Incremental encoder module
5 to 12 Vdc
100 kHz
2
ENC-02
404
Slot
Part Number
List Price
3
3
3
3
3
3
4
4
4
4
4
4
4
RS485-01
RS232-01
RS232-02
CAN/RS485-01
CAN-01
PROFIBUS DP-01
PROFDP-05
DEVICENET-05
ETHERNET/IP-05
RS232-05
RS485-05
MODBUSTCP-05
PROFINETIO-05
$212
161
179
453
378
512
1,138
1,138
1,138
277
333
1,680
1,939
Slot
Part Number
List Price
2 14-bit analog inputs in voltage or current
2 digital inputs
2 14-bit analog outputs in voltage or current
2 open collector type digital outputs
2 isolated 12-bit analog inputs
2 digital inputs
2 isolated 11-bit analog outputs in voltage or current
2 open collector type digital outputs
Interface with Encoder
Description
Communication
Description
RS-485 Serial Communication Module (Modbus-RTU)
RS-232C Serial Communication Module (Modbus-RTU)
RS-232C Serial Communication Module (Modbus-RTU) with DIP switch for flash memory prog.
CAN/RS-485 Interface Module (CANopen, DeviceNet and Modbus)
CAN Interface Module (CANopen and DeviceNet)
Profibus DP-V1 Interface Module
Profibus DP Interface Module
DeviceNet Interface Module
EtherNet/IP Interface Module
RS-232 Interface Module (passive) (Modbus-RTU)
RS-485 Interface Module (passive) (Modbus-RTU)
Modbus - TCP/IP interface module
Profinet interface module
PLC Module
Description
PLC functions; Ladder programming; electronic ggearbox; 9 digital inputs; 3 dry-contact digital
outputs; 3 open-collector digital ouputs; 1 analog input (14 bits); 2 analog outputs (14 bits); 2
encoder interfaces; RS-485 Modbus-RTU interface; CAN interface (CANopen, CANopen master/
slave).
1,2,3
PLC11-01
$1,960
PLC functions; Ladder programming; electronic ggearbox; 4 digital inputs; 1 dry-contact digital
outputs; 3 open-collector digital ouputs; 2 encoder interfaces; RS-485 Modbus-RTU interface; CAN
interface (CANopen, CANopen master/slave).
1,2,3
PLC11-02
1,215
1.32
Variable Frequency Drives
101
www.pamensky.com
CFW 11M - Accessories
Keypad Accessories and Cable for HMI
Description
CFW 11 Keypad
Frame for keypad remote assembly, IP56
Blank cover for keypad slot
1m (3.3ft) Remote Keypad Cable
2m (6.6ft) Remote Keypad Cable
3m (10ft) Remote Keypad Cable
5m (16ft) Remote Keypad Cable
7.5m (25ft) Remote Keypad Cable
10m (33ft) Remote Keypad Cable
Part Number
List Price
HMI-01
RHMIF-01
HMID-01
IHM CAB-RS-1M
IHM CAB-RS-2M
IHM CAB-RS-3M
IHM CAB-RS-5M
IHM CAB-RS-7.5M
IHM CAB-RS-10M
$318
60
47
47
52
57
65
78
88
Part Number
List Price
DBW03
$5,904
Dynamic Braking
Description
External Dynamic Braking Module
Variable Frequency Drives
1.33
www.pamensky.com
101
CFW 11M - Technical Data
380-480V: 380/400/415/440/480 V (+10%/-15%)
Voltage and
power range
Power Supply and
Power Range
Frequency
Three-Phase
500-600V: 525/575/600 V (+10%/-15%)
660-690V: 660 (+10%/-15%) /690 V
50 / 60 Hz +-2% (48 to 63 Hz)
Displacement factor Greater than 0.98
Efficiency
Greater than 0.97
Voltage
Three Phase, 0 up to power supply voltage
Frequency
Switching
Frequency
0 to 400 Hz
Standard: 5kHz
Options available: 2.5 / 5 / 10 kHz
110% for 1 min every 10min
Normal Duty Cycle
150% for 3 sec every 10min
Motor
Overload
Heavy Duty Cycle
Time (ramps)
Acceleration
Deceleration
Speed variation range: 1:30
Speed
Control
Regulation: 0.5% of rated speed
Speed variation range: 1:100
Regulation: +/- 0.01% of rated speed with 14-bit analog input (IOA)
Regulation: +/- 0.01% of rated speed with digital reference (keyboard, serial
fieldbus, electronic potentiometer, multispeed)
Regulation: +/- 0.05% of rated speed with 12-bit analog input
Range: 10 to 180%
Torque
Control
Sensorless Vector
Regulation: +/- 5% of rated torque
Range: 20 to 180%
Regulation: +/-10% of rated torque (above 3 Hz)
Digital
Inputs and
Outputs (I/Os)
in the Standard
Product
0 to 999 seconds
Regulation: 1% of rated speed
Vector with
Encoder
(with accessory
ENC-01 or ENC02)
Inputs
0 to 999 seconds
Speed variation range: 1:20
Voltage Vector
(VVW)
Performance
200% for 3 sec every 10min
Regulation: 1% of rated speed
Scalar (V/f)
Sensorless Vector
150% for 1 min every 10min
Analog
Relay
6 isolated inputs, 24 Vdc, programmable functions
2 differential inputs isolated by differential amplifier, programmable functions
Resolution:
- AI1: 12 bits
- AI2: 11 bits + signal
Signals: (0 to 10) V, (0 to 20) mA or (4 to 20) mA
Impedance:
- 400 kΩ for signal (0 to 10) V
- 500 Ω for signal (0 to 20) mA or (4 to 20) mA
3 relays with NO/NC contacts, 240 Vac / 1A, programmable functions
2 isolated outputs, programmable functions
Outputs
Analog
Available supply to user
Environment
Resolution: 11 bits
Load:
0 to 10 V: RL >= 10 kΩ
0 to 20 mA or 4 to 20 mA: RL < 500Ω
24 Vdc + -20%, 500 mA
Temperature of
Operation
- 10ºC to 50ºC
Humidity
5 to 90% without condensation
Altitude
0 to 1000 meters
Up to 60°C with current derating (2% for each 1°C above 50°C)
Up to 4000 meters with current reduction (1% for every 100 meters above 1000 meters)
Degree of
Protection
IP41
Rheostatic Braking
Braking Methods
1.34
Supply available to user
External braking resistor (not provided)
Optimal Braking
Does not need braking resistor
DC Braking
Direct current applied to the motor
Variable Frequency Drives
101
www.pamensky.com
CFW 11M - Technical Data
Profibus DP
DeviceNet
CANopen
CANopen Master/Slave
EtherNet TCP/IP
Communication
RS485 - ModBus RTU
RS232 - ModBus RTU
USB
Protections
Safety Standards
Mechanical
Construction
Standards
Electromagnetic
Compatibility
Standards (EMC)
PROFIBUS DP (slot 4)
CAN/RS485-01 (slot 3)
CAN-01 (slot 3)
DEVICENET-05 (slot4)
CAN/RS485-01 (slot 3)
CAN-01 (slot 3)
PLC11-01 (slot 1/2/3)
ETHERNET/IP-05 (slot 4)
RS485-01
CAN/RS485-01
RS485-05
RS232-01
RS232-05
Built-into the standard product
Communication with SUPERDRIVE G2 Software
Communication with WLP Software used for programming and monitoring the Soft
PLC function and the PLC11-01 accessory
Overcurrent / short circuit
Under / overvoltage in the power circuit
Phase loss
Overtemperature in the inverter (IGBTs, rectifier and internal air in the electronic cards)
Overtemperature in the motor
Overload in the braking resistor
Overload in the IGBTs
Overload in the motor
Fault / external alarm
Fault in the CPU or memory
Phase-to-ground short circuit at the output
Fault in the heatsink fan
Overspeed of motor
Incorrect connection of encoder
UL 508C
Power conversion equipment
UL 840
Insulation coordination including clearances and creepage distances for electrical equipment
EN 61800-5-1
Safety requirements electrical, thermal and energy
EN 50178
Electronic equipment for use in power installations
EN 60204-1
Safety of machinery.
Electrical equipment of machines.
Part 1: General requirements.
Note: In order to have a machine in conformity with this norm, the machine manufacturer is responsible for the installation of an emergency shutdown device and
an equipment for network sectioning
EN 60146 (IEC 146)
Semiconductor converters
EN 61800-2
Adjustable speed electrical power drive systems
Part 2: General requirements – rating specifications for low voltage adjustable frequency a.c. power drive systems
EN 60529 - Degrees of protection provided by enclosures (IP Code)
UL 50 - Enclosures for electrical equipment
EN 61800-3 - Adjustable speed electrical power drive systems
Part 3: EMC product standard including specific test methods
EN 55011 - Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM)
radio-frequency equipment
CISPR 11 - Industrial, scientific and medical (ISM)radio-frequency equipment Electromagnetic disturbance characteristics.
Limits and methods of measurement
EN 61000-4-2 - Electromagnetic Compatibility Standards (EMC)
Part 4: Testing and measurement techniques
Section 2: Electrostatic discharge immunity test
EN 61000-4-3 - Electromagnetic Compatibility Standards (EMC)
Part 4: Testing and measurement techniques
Section 3:Radiated, radiofrequency, electromagnetic field immunity test
EN 61000-4-4 - Electromagnetic Compatibility Standards (EMC)
Part 4: Testing and measurement techniques
Section 4: Electrical fast transient / burst immunity test
EN 61000-4-5 - Electromagnetic Compatibility Standards (EMC)
Part 4: Testing and measurement techniques
Section 5: Surge immunity test
EN 61000-4-6 - Electromagnetic Compatibility Standards (EMC)
Part 4: Testing and measurement techniques
Section 6: Immunity to conducted disturbances, induced by radio-frequency fields
Variable Frequency Drives
1.35
www.pamensky.com
101
CFW 700 - Variable Frequency Drive
Designed for controlling squirrel cage threephase induction motors the new CFW700 is a
general purpose drive that gives costumers the
flexibility needed for the control of applications
ranging from simple speed control to more
demanding ones including torque control.
Standard Features
•
•
•
•
•
•
•
•
•
•
•
•
Built-in DC Link Reactor
Encoder Interface
RS485 Port for Modbus-RTU
communication
8 Digital Inputs / 5 Digital Outputs.
2 Analog Inputs / 2 Analog Outputs.
Common DC bus Connection
Multi-speed: up to 8 preset speeds can
be programmed.
PID regulation: eliminates the use of an
external controller for closed loop control,
thus great performance of speed and
torque can be achieved.
Ride through: embedded in the CFW700
control this function avoids the drive from
tripping during a power outage.
Speed/Torque regulation: open and
closed loop (encoder feedback required).
Flying start: it is able to start smoothly
a motor connected to a rotating load
regardless rotation direction.
Control options for DC bus regulation:
prevents the drive from tripping when
short deceleration time is required, in
demanding applications with high inertia
loads.
1.36
•
•
•
•
•
•
S ramp: in applications requiring smooth
start-up (e.g. beverage industry) this
function can avoid production losses
traditional start-up incurs.
Three-wire Start/Stop control: retentive
contact can command the drive to start/
stop the motor. (Soft PLC)
Electronic potentiometer: increase and
decrease motor speed using pushbutton
control
Skip frequency: for some applications
specific frequencies must be avoided to
protect against resonance effects.
Motor thermal curve adjustment: separate
adjustment between the motor and drive
allows for more effective protection for
overload cycles.
Copy function: by using the flash memory
card MMF-02 parameter settings can
be easily stored ensuring integrity and
safety in case replacement of the drive is
required.
Factory Options
•
•
•
Safety Stop
RFI Filter
24 VDC power input option for control section
Variable Frequency Drives
101
www.pamensky.com
CFW 700 - Part Number Specification
CFW700
A
03P6
T
4
DB
20
--
Y1
W1
1
2
3
4
5
6
7
8
9
10
1.
CFW-700 Variable Frequency Drive
2.
Frame Size:
3.
Output Rated Current:
4.
Power Supply:
5.
6.
7.
Power Supply Voltage:
Braking Module:
Enclosure:
8.
RFI Filter:
9.
Safety Stop:
10.
A, B, C, D or E
S = single-phase
T = three-phase
B = single-phase or three-phase
2 = 200-240 V (Frames A, B, C, D)
220-230 V (Frame E)
4 = 380-480 V
5 = 500-600 V
NB = no built-in IGBT
DB = with built-in braking IGBT (standard for frames
A, B, C, D)
20 = IP 20 (standard for frames A, B, C and E)
N1 = Nema 1 (standard for frame D)
21 = IP21
Blank = standard
Blank = standard (without safety stop function)
Y1 = with safety stop function according to
EN-954-1 category 3
200-240V
380-480V
500-600V
06P0 = 6.0 A
03P6 = 3.6 A
02P9 = 2.9 A
07P0 = 7.0 A
05P0 = 5.0 A
04P2 = 4.2 A
10P0 = 10 A
06P0 = 6 A
07P0 = 7 A
13P0 = 13 A
07P0 = 7.0 A
10P0 = 10 A
16P0 = 16 A
10P0 = 10 A
12P0 = 12 A
24P0 = 24 A
13P5 = 13.5 A
17P0 = 17 A
28P0 = 28 A
17P0 = 17 A
22P0 = 22 A
33P5 = 33.5 A
24P0 = 24 A
27P0 = 27 A
45P0 = 45 A
31P0 = 31 A
32P0 = 32 A
54P0 = 54 A
38P0 = 38 A
44P0 = 44 A
70P0 = 70 A
45P0 = 45 A
53P0 = 53 A
86P0 = 86 A
58P5 = 58.5 A
63P0 = 63 A
0105 = 105 A
70P5 = 70.5 A
80P0 = 80 A
0107 = 107 A
0142 = 142 A
88P0 = 88 A
0180 = 180 A
0105 = 105 A
0125 = 125 A
0211 = 211 A
0142 = 142 A
0150 = 150 A
0180 = 180 A
0211 = 211 A
* Selection Table for 2
External Electronic
Supply for Control:
Blank = Control circuit is fed by the inverter SMPS
W1 = Control circuit is supplied from an external +24Vdc
Example:
CFW700B28POT2DB20
Variable Frequency Drives
1.37
www.pamensky.com
101
CFW 700 - Table of Products
200-240V - Single Phase
Electrical Data
Current
(A)
ND*
HD*
6
7
10
5
7
10
Built-In
Dynamic
Braking
Standard
Standard
Standard
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
1.5
2
3
1
2
3
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
A
A
A
13.9
13.9
13.9
NEMA 1
NEMA 1
NEMA 1
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
CFW700A06POB2DBN1
CFW700A07POB2DBN1
CFW700A10POS2DBN1
$1,699
1,748
1,854
200-240V - Three Phase
Electrical Data
Current
(A)
ND*
HD*
6
7
7
10
13
16
24
28
33.5
45
54
70
86
105
5
7
5.5
8
11
13
20
24
28
36
45
56
70
86
Built-In
Dynamic
Braking
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
1.5
2
2
3
3
5
7.5
10
10
15
20
25
30
40
1
2
1
2
3
3
5
7.5
10
10
15
20
25
30
ND*
HD*
142
180
211
115
142
180
Built-In
Dynamic
Braking
Optional
Optional
Optional
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
A
A
A
A
A
A
B
B
B
C
C
C
D
D
13.9
13.9
13.9
13.9
13.9
13.9
22.9
22.9
22.9
45.2
45.2
45.2
120.2
120.2
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
17.64 x 8.67 x 11.52
17.64 x 8.67 x 11.52
17.64 x 8.67 x 11.52
21.63 x 11.81 x 12.00
21.63 x 11.81 x 12.00
CFW700A06POB2DBN1
CFW700A07POB2DBN1
CFW700A07POT2DBN1
CFW700A10POT2DBN1
CFW700A13POT2DBN1
CFW700A16POT2DBN1
CFW700B24POT2DBN1
CFW700B28POT2DBN1
CFW700B33POT2DBN1
CFW700C45POT2DBN1
CFW700C54POT2DBN1
CFW700C70POT2DBN1
CFW700D86POT2DBN1
CFW700D0105T2DBN1
$1,699
1,748
1,626
1,724
1,794
1,923
2,371
2,417
2,748
3,270
4,014
4,676
5,880
7,555
Notes:
1.38
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
50
60
75
40
50
60
* ND - Normal Duty
•
110% during 60 seconds every 10 minutes
utes
•
150% during 3 seconds every 10 minutes
es
Purchasing Data
Frame
220-230V - Three Phase
Electrical Data
Current
(A)
Purchasing Data
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
E
E
E
143.3
143.3
143.3
NEMA 1
NEMA 1
NEMA 1
28.94 x 13.20 x 14.10
32.63 x 13.20 x 14.10
32.63 x 13.20 x 14.10
CFW700E0142T2NBN1C3
CFW700E0180T2NBN1C3
CFW700E0211T2NBN1C3
$10,796
15,125
19,767
* HD - Heavy Duty
•
150% during 60 seconds every 10 minutes
•
200% during 3 seconds every 10 minutes
The maximum motor power ratings
gs listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/
or from other manufacturers, specify
ecify the VFD through the motor rated current.
Variable Frequency Drives
101
www.pamensky.com
CFW 700 - Table of Products
380-480V - Three Phase
Electrical Data
Current
(A)
ND*
HD*
3.6
5
7
10
13.5
17
24
31
38
45
58.5
70.5
88
105
142
180
211
3.6
5
5.5
10
11
13.5
19
25
33
38
47
61
73
88
115
142
180
Built-In
Dynamic
Braking
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Optional
Optional
Optional
Optional
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
2
3
3
5
7.5
10
15
20
25
30
40
50
60
75
100
150
150
2
3
3
5
7.5
7.5
10
15
20
25
30
40
50
60
75
100
150
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
A
A
A
A
A
B
B
B
C
C
C
D
D
E
E
E
E
13.9
13.9
13.9
13.9
13.9
22.9
22.9
22.9
45.2
45.2
45.2
120.2
120.2
143.3
143.3
143.3
143.3
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
17.64 x 8.67 x 11.52
17.64 x 8.67 x 11.52
17.64 x 8.67 x 11.52
21.63 x 11.81 x 12.00
21.63 x 11.81 x 12.00
28.94 x 13.20 x 14.10
28.94 x 13.20 x 14.10
32.63 x 13.20 x 14.10
32.63 x 13.20 x 14.10
CFW700A03P6T4DBN1
CFW700A05P0T4DBN1
CFW700A07P0T4DBN1
CFW700A10P0T4DBN1
CFW700A13P5T4DBN1
CFW700B17P0T4DBN1
CFW700B24P0T4DBN1
CFW700B31P0T4DBN1
CFW700C38P0T4DBN1
CFW700C45P0T4DBN1
CFW700C58P5T4DBN1
CFW700D70P5T4DBN1
CFW700D88P0T4DBN1
CFW700E0105T4NBN1C3
CFW700E0142T4NBN1C3
CFW700E0180T4NBN1C3
CFW700E0211T4NBN1C3
$1,670
1,771
1,833
1,887
1,978
2,334
2,820
3,549
4,224
5,317
6,576
7,129
8,524
9,902
11,647
17,079
19,863
500-600V - Three Phase
Electrical Data
Current
(A)
ND*
HD*
2.9
4.2
7
10
12
17
22
27
32
44
53
63
80
107
125
150
2.7
3.8
6.5
9
10
17
19
22
27
36
44
53
66
90
107
122
Built-In
Dynamic
Braking
Standard
Standard
Standard
Standard
Standard
Standard
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Mechanical Data
Maximum Applicable Motor
ND*
HD*
HP
HP
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
2
2
5
7.5
7.5
15
15
20
25
30
40
50
60
75
100
100
* ND - Normal Duty
•
110% during 60 seconds every 10 minutes
•
150% during 3 seconds every 10 minutes
Purchasing Data
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
B
B
B
B
B
B
D
D
D
D
E
E
E
E
E
E
22.9
22.9
22.9
22.9
22.9
22.9
120.2
120.2
120.2
120.2
143.3
143.3
143.3
143.3
143.3
143.3
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
21.63 x 11.81 x 12.00
21.63 x 11.81 x 12.00
21.63 x 11.81 x 12.00
21.63 x 11.81 x 12.00
28.94 x 13.20 x 14.10
28.94 x 13.20 x 14.10
28.94 x 13.20 x 14.10
28.94 x 13.20 x 14.10
28.94 x 13.20 x 14.10
28.94 x 13.20 x 14.10
CFW700B02P9T5DBN1
CFW700B04P2T5DBN1
CFW700B07P0T5DBN1
CFW700B10P0T5DBN1
CFW700B12P0T5DBN1
CFW700B17P0T5DBN1
CFW700D22P0T5NBN1
CFW700D27P0T5NBN1
CFW700D32P0T5NBN1
CFW700D44P0T5NBN1
CFW700E53P0T5NBN1C3
CFW700E63P0T5NBN1C3
CFW700E80P0T5NBN1C3
CFW700E0107T5NBN1C3
CFW700E0125T5NBN1C3
CFW700E0150T5NBN1C3
$2,089
2,169
2,283
2,464
2,603
3,035
4,552
4,847
6,261
7,408
9,365
10,676
11,306
13,604
16,742
21,506
* HD - Heavy Duty
•
150% during 60 seconds every 10 minutes
•
200% during 3 seconds every 10 minutes
Notes:
The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles
(ie. 6 and 8 poles), other voltages and/or from other manufacturers, specify the VFD through the motor rated current.
Variable Frequency Drives
1.39
www.pamensky.com
101
CFW 700 - Accessories
Communication
Description
CAN Interface Module (CANopen and DeviceNet)
Profibus DP-V1 Interface modul
Part Number
List Price
CAN-01
PROFIBUS DP-01
$378
512
Part Number
List Price
HMI-02
RHMIF-02
HMID-01
IHM CAB-RS-1M
IHM CAB-RS-2M
IHM CAB-RS-3M
IHM CAB-RS-5M
IHM CAB-RS-7.5M
IHM CAB-RS-10M
$233
52
47
47
52
57
65
78
88
Part Number
List Price
PCSA-01
PCSB-01
PCSC-01
$42
44
47
Part Number
List Price
KN1A-02
KN1B-02
KN1C-02
$109
109
124
Keypad Accessories and Cable for HMI
Description
CFW 700 Keypad
Frame for keypad remote assembly, IP56
Blank cover for keypad slot
1m (3.3ft) Remote Keypad Cable
2m (6.6ft) Remote Keypad Cable
3m (10ft) Remote Keypad Cable
5m (16ft) Remote Keypad Cable
7.5m (25ft) Remote Keypad Cable
10m (33ft) Remote Keypad Cable
Shielding Kits
Description
Power cable shielding kit for frame A
Power cable shielding kit for frame B
Power cable shielding kit for frame C
NEMA 1 Kits
Description
NEMA 1 - conduit kit kit for frame A + Power cable shielding
NEMA 1 - conduit kit kit for frame B + Power cable shielding
NEMA 1 - conduit kit kit for frame C + Power cable shielding
1.40
Variable Frequency Drives
101
www.pamensky.com
CFW 700 - Technical Data
Single-phase
Voltage
200-220 V ac (+10%-15%)
200-220 V ac (+10%-15%)
Three-phase
380-480 V ac (+10%-15%)
500-600 V ac (+10%-15%)
Single-phase
Voltage and rating
Power
features
1.5 to 3 HP (1.1 to 2.2 kW)
1.5 to 75 HP (1.1 to 55 kW)
Three-phase
2 to 150 HP (1.5 to 110 kW)
2 to 175 HP (1.5 to 110 kW)
Frequency
50...60 Hz (+/-2%_48 to 63 Hz)
Displacement factor Greater than 0.98
Efficiency
Power factor
Frequency range
Greater than 0.97
0.94 for Three-phase input at nominal conditional
0.70 for Single-phase input at nominal conditional
0 to 3.4x motor rated frequency (P0403). The rated frequency is programable up to 300Hz (V/Hz) and 120Hz (vector mode). Switching Frequency data must be observed for speed limits.
Standard: 5 kHz (A, B, C e D frames)
2.5 kHz for all 380 V models frame E
Switching
frequency
2.5 kHz for frame E 220 V models 142/180 Amps (ND)
2.5 kHz for frame E 220 V model 211 Amps (ND/HD)
5 kHz for frame E 220 V models 142/180 Amps (HD)
Control
Overload
Aceleration
Deceleration
Temperature
Environment
Humidity
Altitude
Dynamic braking
Braking Methods Optimal braking
DC braking
Available options for 2.5/5/10 kHz (check for derating)
110% for 1 min every 10 min
Normal Duty (ND)
150% for 3 s every 10 min
150% for 1 min every 10 min
Heavy Duty (HD)
200% for 3 s every 10 min 0 to 999 s
0 to 999 s
-10 to 50 °C (14 to 122 °F) for most of models. For operating temperature of each model the table "Dimensions, Weight and
Temperature”shall be checked.
-10...60ºC for frames A, B, C and D (up to 45 °C without derating for models 13 A and 24 A/200...240 V, 7 and 10 A/380...480 V and up to
50 °C without derating for the other models) and-10...55 °C for frame E (up to 45 °C without derating). If derating has to be considered have
2% current reduction for each °C above the specific operating temperature.
5 to 90% with no condensation
0 to 1000 meters with no derating
Up to 4000 meters with current reduction of 1% for each 100 meters above 1000 meters
Available as standard for frame sizes A, B, C and D for 460 V and D for 600 V. For frame size E "DB”models has to be used. An extra resistor
must be fitted in for dynamic braking capability.
There is no need for braking resistor
DC current applied to motor
Regulation: 1% of rated speed
V/f
Speed Variation range 1:20
Regulation: 1% of rated speed
Voltage vector VVW
Speed control
Sensorless vector
Regulation: 0.5% of rated speed
Speed Variation range 1:100
Regulation:+/- 0.1% of rated speed with digital reference
(keypad, serial fieldbus, multispeed)
Regulation:+/- 0.2% of rated speed with 12 bits analog input
Range: 10 to 180%
Performance
Vector with encoder
(Encoder interface
built-in)
Torque control
Sensorless Vector
I/Os
Output
Analog
Relay
Analog
24 V power supply
capacity
Regulation: +/-5% of rated torque
Range: 20 to 180%
Regulation: +/-10% of rated torque (above 3 Hz)%
Digital
Inputs
Speed Variation range 1:30
8 x isolated bidirectional 24 V
2 x +/-10 V, 11 bits + signal (differencial) or 0/4...20 mA, 11 bits (differencial)
Impedance: 400 kΩ for voltage signal / 500 Ω for current signal
1 x relay NO/NC contact (240 V ac/1 A)
4 x open drain (24 V/200 mA)
2 x 0...10 V or 0/4...20 mA, 11 bits
500 mA (available for the user, including I/Os)
Variable Frequency Drives
1.41
www.pamensky.com
101
CFW 700 - Technical Data
Modbus-RTU
Communication
DeviceNet
RS485 built-in (available at the control terminals)
RS485 built-in / Superdrive and WLP communication
CAN-01 (slot 3)
CANopen
CAN-01 (slot 3)
Profibus DP
PROFIBUS DP-01 (slot 3)
UL 508C Power conversion equipment
UL 840 Insulation coordination including clearences and creepage distances for electrical equipment
EN61800-5-1 - Safety requirements electrical, thermal and energy.
Safety standards
EN 50178 - Electronic equipment for use in power installations.
EN 60204-1 - Safety of machinery. Electrical equipment of machines. Part 1: General requirements. In order to have a machine in conformity with this regulation,
the machine builder is resposible forthe installation of na emergency shutdown device and na equipment for power disconnection.
EN 60146 (IEC 146) - Semiconductor converters.
EN 61800-2 - Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable frequency
A.C. power drive systems
EN 60529 - Degrees of protection provided by enclosures (IP code).
UL 50 - Enclosures for electrical equipment
EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC product standard including specifc test methods.
EN 55011 - Limits and methods of measurement of radio disturbance characteristics of undustrial, scientific and medical (ISM) radio-frequency equipment.
CISPR 11 - Industrial, scientifc and medical (ISM) radio-frequency equipment - Eletromagnetic disturbance characteristics
Mechanical
construction
standards
eletromagnetic
compatibility
standards (EMC)
- Limits and methods of measurement.
EN 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Eletrostatic
discharge immunity test.
EN 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 3: Radiated, radiofrequency, electromagnetic feld immunity test.
EN 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast
transient/burst immunity test.
EN 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test.
EN 61000-4-6 - Electromagnetic compatibility (EMC)- Part 4: Testing and measurement techniques - Section 6: Immunity to conducted
disturbances, induced by radio-frequency fields.
Overcurrent / Short Circuit Under / Overvoltage in the power section
Phase Loss
VSD thermal Overload (IGBTs, rectifier and in the eletronics)
Motor thermal overload
Braking resistor overload
Protections
IGBTs overload
Motor overload
Fault / external alarm
CPU failure
Phase-to ground short circuit at the output
Failure at the heatsink fan
Motor overspeed
Wrong connection of encoder wiring
1.42
Variable Frequency Drives
101
www.pamensky.com
CFW 701 - HVAC Variable Frequency Drive
The CFW701 HVAC is a variable-speed drive intended for use
with asynchronous motors when heating, ventilation, air
conditioning and refrigeration applications are to be met.
Offering excellent cost-effectiveness, the CFW701 HVAC follows
the CFW700 with plug and play technology, accessories
incorporated in the standard version and simple operation.
Standard Features
•
•
•
•
•
•
•
•
•
•
•
230 V single-phase
Rated output current 6 to 10 A (1,5 to 3
HP - 1.5 to 3 kW)
220 V three-phase
Rated output current of 7 to 211 A (0.5 to
75 HP - 0.18 to 55 kW)
380-480 V three-phase
Rated output current of 3.6 to 211 A (0.5
to 150 HP - 0.58 to 110 kW)
Compact structure, ideal for installation in
confined spaces
High accuracy and reliability in speed
control
Robust hardware
Degree of protection IP20 - standard
(IP21 and NEMA1 optional)
RFI filter( for electromagnetic interference
mitigation)
LCD Operating interface with backlight
Inductors in the DC Link
Inputs and outputs (I/O):
8 Isolated digital inputs
3 Differential analog inputs (0-10V/4-20
mA (2) and 4-20 mA (1))
5 Digital outputs (2 relays with NA
contacts, 3 isolated transistors)
2 Non-isolated analog outputs
1 Dedicated input for PTC
•
•
•
Special varnish protects electronic boards
from dust, moisture, high temperatures
and chemicals According to DIN EN
60068-2-60
RS-485 interface: BACnet MS/TP,
Metasys N2 and Modbus RTU
Intelligent cooling system
Optional Features
•
•
•
Operator interface for remote assembly
(up to 10 meters)
Flash memory module (storage capacity
of 1 MB)
Safety stop module – Guarantees the
blocking of firing circuit and therefore
power to the motor. Meets EN 954-1 / EN
13849-1, category 3 standards.
This VFD complies with the following
standards:
•
EN 61800-5-2:2007, EN ISO 138491:2008 + AC:2009, IEC 62061:2005, IEC
61508 Parts 1-7:2010, EN 50178:1997,
IEC 60204-1:2005 (in extracts)
Variable Frequency Drives
1.43
www.pamensky.com
101
CFW 701 - Part Number Specification
CFW701
A
03P6
T
4
DB
20
--
Y1
W1
1
2
3
4
5
6
7
8
9
10
1.
CFW-701 HVAC Variable Frequency Drive
2.
Frame Size:
3.
Output Rated Current:
4.
Power Supply:
5.
6.
7.
Power Supply Voltage:
Braking Module:
Enclosure:
A, B, C, D or E
S = single-phase
T = three-phase
B = single-phase or three-phase
2 = 200-240 V (Frames A, B, C, D)
220-230 V (Frame E)
4 = 380-480 V
NB = no built-in IGBT
DB = with built-in braking IGBT (standard for frames
A, B, C, D)
20 = IP 20 (standard for frames A, B, C and E)
N1 = Nema 1 (standard for frame D)
21 = IP21 (not available for frame E)
8.
RFI Filter:
Blank = standard
9.
Safety Stop:
Blank = standard (without safety stop function)
Y1 = with safety stop function according to
EN-954-1 category 3
200-240V
380-480V
06P0 = 6.0 A
03P6 = 3.6 A
07P0 = 7.0 A
05P0 = 5.0 A
10P0 = 10 A
06P0 = 6 A
13P0 = 13 A
07P0 = 7.0 A
16P0 = 16 A
10P0 = 10 A
24P0 = 24 A
13P5 = 13.5 A
28P0 = 28 A
17P0 = 17 A
33P5 = 33.5 A
24P0 = 24 A
45P0 = 45 A
31P0 = 31 A
54P0 = 54 A
38P0 = 38 A
70P0 = 70 A
45P0 = 45 A
86P0 = 86 A
58P5 = 58.5 A
0105 = 105 A
70P5 = 70.5 A
0142 = 142 A
88P0 = 88 A
0180 = 180 A
0105 = 105 A
0211 = 211 A
0211 = 211 A
* Selection Table for 2
10.
1.44
0142 = 142 A
0180 = 180 A
External Electronic
Supply for Control:
Blank = Control circuit is fed by the inverter SMPS
W1 = Control circuit is supplied from an external +24Vdc
Example:
CFW701B28POT2DB20
Variable Frequency Drives
101
www.pamensky.com
CFW 701 - Table of Products
200-240V - Single Phase
Electrical Data
Current
(A)
Built-In Dynamic
Braking
Mechanical Data
Maximum
Applicable Motor
Frame
Weight
(lb)
Degree of
Protection
A
A
A
13.9
13.9
13.9
NEMA 1
NEMA 1
NEMA 1
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
HP
6
7
10
Standard
Standard
Standard
1.5
2
3
200-240V - Single and Three Phase
Electrical Data
Current
(A)
Built-In Dynamic
Braking
Mechanical Data
Maximum
Applicable Motor
Standard
Standard
1.5
2
Current
(A)
Built-In Dynamic
Braking
Dimensions
(in)
HxWxD
Part Number
A
A
13.9
13.9
NEMA 1
NEMA 1
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
CFW701A06POB2DB20
CFW701A07POB2DB20
Mechanical Data
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
2
3
3
5
7.5
10
10
15
20
25
30
40
Built-In Dynamic
Braking
Frame
Weight
(lb)
Degree of
Protection
A
A
A
A
B
B
B
C
C
C
D
D
13.9
13.9
13.9
13.9
22.9
22.9
22.9
45.2
45.2
45.2
71.8
71.8
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
17.64 x 8.67 x 11.52
17.64 x 8.67 x 11.52
17.64 x 8.67 x 11.52
21.63 x 11.81 x 12.00
21.63 x 11.81 x 12.00
Mechanical Data
Maximum
Applicable Motor
Optional
Optional
Optional
50
60
75
Part Number
CFW701A07POT2DB20
CFW701A10POT2DB20
CFW701A13POT2DB20
CFW701A16POT2DB20
CFW701B24POT2DB20
CFW701B28POT2DB20
CFW701B33POT2DB20
CFW701C45POT2DB20
CFW701C54POT2DB20
CFW701C70POT2DB20
CFW701D86POT2DB20
CFW701D0105POT2DB20
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
E
E
E
143.3
143.3
143.3
NEMA 1
NEMA 1
NEMA 1
28.94 x 13.20 x 14.10
32.63 x 13.20 x 14.10
32.63 x 13.20 x 14.10
CFW701E0142POT2NB20
CFW701E0180POT2NB20
CFW701E0211POT2NB20
HP
142
180
211
Purchasing Data
Dimensions
(in)
HxWxD
220-230V - Three Phase
Electrical Data
Current
(A)
Purchasing Data
Degree of
Protection
HP
7
10
13
16
24
28
33.5
45
54
70
86
105
CFW701A06POS2DB20
CFW701A07POS2DB20
CFW701A10POS2DB20
Weight
(lb)
200-240V - Three Phase
Electrical Data
Maximum
Applicable Motor
Part Number
Frame
HP
6
7
Purchasing Data
Dimensions
(in)
HxWxD
* ND - Normal Duty
•
110% during 60 seconds every 10 minutes
Notes:
The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/
or from other manufacturers, specify the VFD through the motor rated current.
Variable Frequency Drives
1.45
www.pamensky.com
101
CFW 701 - Table of Products
380-480V - Three Phase
Electrical Data
Current
(A)
Built-In Dynamic
Braking
Mechanical Data
Maximum
Applicable Motor
Frame
Weight
(lb)
Degree of
Protection
A
A
A
A
A
B
B
B
C
C
C
D
D
E
E
E
E
13.9
13.9
13.9
13.9
13.9
22.9
22.9
22.9
45.2
45.2
45.2
71.8
71.8
143.3
143.3
143.3
143.3
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
12.02 x 5.71 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
17.64 x 8.67 x 11.52
17.64 x 8.67 x 11.52
17.64 x 8.67 x 11.52
21.63 x 11.81 x 12.00
21.63 x 11.81 x 12.00
28.94 x 13.20 x 14.10
28.94 x 13.20 x 14.10
32.63 x 13.20 x 14.10
32.63 x 13.20 x 14.10
HP
3.6
5
7
10
13.5
17
24
31
38
45
58.5
70.5
88
105
142
180
211
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Optional
Optional
Optional
Optional
2
3
3
5
7.5
10
15
20
25
30
40
50
60
75
100
150
150
500-600V - Three Phase
Electrical Data
Current
(A)
Built-In Dynamic
Braking
Mechanical Data
Maximum
Applicable Motor
Standard
Standard
Standard
Standard
Standard
Standard
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
150
Part Number
CFW701A03P6T4DB20
CFW701A05P0T4DB20
CFW701A07P0T4DB20
CFW701A10P0T4DB20
CFW701A13P5T4DB20
CFW701B17P0T4DB20
CFW701B24P0T4DB20
CFW701B31P0T4DB20
CFW701C38P0T4DB20
CFW701C45P0T4DB20
CFW701C58P5T4DB20
CFW701D70P5T4DB20
CFW701D88P0T4DB20
CFW701E0105T4NB20
CFW701E0142T4NB20
CFW701E0180T4NB20
CFW701E0211T4NB20
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
B
B
B
B
B
B
D
D
D
D
E
E
E
E
E
E
E
22.9
22.9
22.9
22.9
22.9
22.9
71.8
71.8
71.8
71.8
143.3
143.3
143.3
143.3
143.3
143.3
143.3
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
NEMA 1
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
13.82 x 7.46 x 8.94
21.63 x 11.81 x 12.00
21.63 x 11.81 x 12.00
21.63 x 11.81 x 12.00
21.63 x 11.81 x 12.00
32.63 x 13.20 x 14.10
32.63 x 13.20 x 14.10
32.63 x 13.20 x 14.10
32.63 x 13.20 x 14.10
32.63 x 13.20 x 14.10
32.63 x 13.20 x 14.10
32.63 x 13.20 x 14.10
CFW701B02P9T5DB20
CFW701B04P2T5DB20
CFW701B07P0T5DB20
CFW701B10P0T5DB20
CFW701B12P0T5DB20
CFW701B17P0T5DB20
CFW701D22P0T5NB20
CFW701D27P0T5NB20
CFW701D32P0T5NB20
CFW701D44P0T5NB20
CFW701E53P0T5NB20
CFW701E63P0T5NB20
CFW701E80P0T5NB20
CFW701E0107T5NB20
CFW701E0125T5NB20
CFW701E0150T5NB20
CFW701E0211T4NB20
HP
2.9
4.2
7
10
12
17
22
27
32
44
53
63
80
107
125
150
211
Purchasing Data
Dimensions
(in)
HxWxD
* ND - Normal Duty
•
110% during 60 seconds every 10 minutes
Notes:
1.46
The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/
or from other manufacturers, specify the VFD through the motor rated current.
Variable Frequency Drives
101
www.pamensky.com
CFW 701 - Accessories
Communication
Description
CAN Interface Module (CANopen and DeviceNet)
Profibus DP-V1 Interface modul
Part Number
CAN-01
PROFIBUS DP-01
Keypad Accessories and Cable for HMI
Description
CFW 700 Keypad
Frame for keypad remote assembly, IP56
Blank cover for keypad slot
1m (3.3ft) Remote Keypad Cable
2m (6.6ft) Remote Keypad Cable
3m (10ft) Remote Keypad Cable
5m (16ft) Remote Keypad Cable
7.5m (25ft) Remote Keypad Cable
10m (33ft) Remote Keypad Cable
Part Number
HMI-03
RHMIF-03
HMID-01
IHM CAB-RS-1M
IHM CAB-RS-2M
IHM CAB-RS-3M
IHM CAB-RS-5M
IHM CAB-RS-7.5M
IHM CAB-RS-10M
Shielding Kits
Description
Power cable shielding kit for frame A
Power cable shielding kit for frame B
Power cable shielding kit for frame C
Part Number
PCSA-01
PCSB-01
PCSC-01
NEMA 1 Kits
Description
NEMA 1 - conduit kit kit for frame A + Power cable shielding
NEMA 1 - conduit kit kit for frame B + Power cable shielding
NEMA 1 - conduit kit kit for frame C + Power cable shielding
Part Number
KN1A-02
KN1B-02
KN1C-02
Variable Frequency Drives
1.47
www.pamensky.com
101
CFW 701 - Technical Data
Single phase
Voltage
Voltage and rating Power
features
Frequency
Displacement
factor
Efficiency
200-220 V ac (+10 %-15 %)
200-220 V ac (+10 %-15 %)
Three phase
380-480 V ac (+10 %-15 %)
500-600 V ac (+10%-15%)
Single phase
1.5 to 3 HP (1.1 to 2.2 kW)
1.5 to 75 HP (1.1 to 55 kW)
Three phase
2 to 150 HP (1.5 to 110 kW)
50...60 Hz (+/-2%_48 to 63 Hz)
Greater than 0.98
Greater than 0.97
0.94 for three phase input at nominal conditional
0.70 for single phase input at nominal conditional
0 to 3.4x motor rated frequency (P0403). The rated frequency is programable up to 300 Hz (V/Hz) and
Frequency range
120 Hz (vector mode). Switching Frequency data must be observed for speed limits.
Standard: 5 kHz ( A, B, C D frames)
2.5 kHz for all 380 V models frame E
2.5 kHz for frame E 220 V models 142/180 Amps (ND)
Switching
frequency
2.5 kHz for frame E 220 V model 211 Amps (ND/HD)
Control
5 kHz for frame E 220 V models 142/180 Amps (HD)
Available options for 2.5 / 5 / 10 kHz ( check for derating)
Normal Duty
110% for 1min every 10 min
(ND)
Overload
Aceleration
0 to 999 s
Deceleration
0 to 999 s
-10 to 50 °C (14 to 122 °F) for most of models. For operating temperature of each model the table " Dimensions,
Weight and Temperature" shall be checked.
-10...60ºC for frames A, B, C and D (up to 45 °C without derating for models 13 A and 24 A/200...240 V, 7 and
Temperature
10 A/380...480 V and up to 50 °C without derating for the other models) and-10...55 °C for frame E (up to 45 °C
without derating). If derating has to be considered have 2% current reduction for each °C above the specific operating
Environment
temperature.
Humidity
5 to 90% with no condensation
0 to 1000 meters with no derating
Altitude
Up to 4000 meters with current reduction of 1% for each 100 meters above 1000 meters
Available as standard for frame sizes A, B, C and D for 460 V and D for 600 V. For frame size E "DB" models has to be
Dynamic braking
used. An extra resistor must be fitted in for dynamic braking capability.
Braking methods Optimal braking There is no need for braking resistor
DC braking
DC Current applied to motor
Regulation: 1% of rated speed
V/f
Speed Variation range 1:20
Performance
Speed control
Regulation: 1% of rated speed
Voltage Vector
VVW
Speed Variation range 1:30
Digital
8 x isolated bidirectional 24 V
Inputs
2 x +/-10V, 11 bits + signal (differencial) or 0/4...20 mA, 11 bits (differencial)
Analog
Impedance: 400 kΩ for voltage signal / 500Ω for current signal
2 x relay NO/NC contact (240 V ac/1 A)
Relay
4 x open drain (24 V/200 mA)
I/Os
Output
1 x 0/4 - 20 mA 11bits
Analog
2 x 0...10 V or 0/4...20 mA, 11 bits
(not isolated from inverter ground)
24 V power
500 mA (available for the user, including I/Os)
supply capacity
Modbus RTU
RS485 built-in ( Available in control terminals)
Communication BACnet MS/TP
RS485 built-in / Superdrive and WLP communication
Metasys N2
Power factor
1.48
Variable Frequency Drives
101
www.pamensky.com
CFW 701 - Technical Data
UL 508C Power conversion equipment
UL 840 Insulation coordination including clearences and creepage distances for electrical equipment
EN61800-5-1 - Safety requirements electrical, thermal and energy.
EN 50178 - Electronic equipment for use in power installations.
Safety standards EN 60204-1 - Safety of machinery. Electrical equipment of machines. Part 1: General requirements. In order to have a machine in
conformity with this regulation, the machine builder is resposible forthe installation of na emergency shutdown device and na equipment for
power disconnection.
EN 60146 (IEC 146) - Semiconductor converters.
EN 61800-2 - Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage
adjustable frequency A.C. power drive systems
EN 60529 - Degrees of protection provided by enclosures (IP code).
UL 50 - Enclosures for electrical equipment
EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC product standard including specifc test methods.
EN 55011 - Limits and methods of measurement of radio disturbance characteristics of undustrial, scientific and medical (ISM) radiofrequency equipment.
Mechanical
CISPR 11 - Industrial, scientifc and medical (ISM) radio-frequency equipment - Eletromagnetic disturbance characteristics - Limits and
Construccion
methods of measurement.
Standards
EN 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Eletrostatic discharge
Eletromagnetic immunity test.
Compatibility
EN 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 3: Radiated, radio-frequency,
Standards (EMC) electromagnetic feld immunity test.
EN 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast transient/
burst immunity test.
EN 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test.
EN 61000-4-6 - Electromagnetic compatibility (EMC)- Part 4: Testing and measurement techniques - Section 6: Immunity to conducted
disturbances, induced by radio-frequency fields.
Overcurrent / Short circuit
Under / Overvoltage in the power section
Phase loss
VSD thermal overload ( IGBTs, rectifier and in the eletronics)
Motor thermal overload
Braking resistor overload
IGBTs overload
Protections
Motor overload
Fault / external alarm
CPU failure
Phase-to ground short circuit at the output
Failure at the heatsink fan
Motor overspeed
Wrong connection of encoder
coder wiring
Variable Frequency Drives
1.49
www.pamensky.com
101
MVW 01- Medium Voltage VFD
WEG is a traditional supplier of solutions in speed variation, manufacturing all the parts of a system:
Input switchgear, transformer(dry-type or oil-type), frequency inverter and electric motor.
The MVW01 is designed to control medium voltage induction motors. It features unique innovations,
combining hardware robustness with simplicity, reliability and safety in a compact solution with few
components and state-of-the-art technology.
MVW01 follows the same programming
philosophy of the WEG low voltage inverter line,
simplifying its application.
Standard Features
It has a multilevel topology with high-voltage
IGBTs (3.3 or 6.5 kV) and optimal switching
reducing the motor harmonic currents to
extremely low levels. By reducing the number
of components in the drive WEG has made the
MVW-01 more efficient and reliables.
•
•
The multipulse diode configuration of the input
rectifier gives a high power factor in the power
supply meeting IEEE 519 requirements.
In the control stage, it has a multiprocessing
architecture using 32-bit processors (64-bit
bus) with floating point capability and high
performance, ensuring high efficiency in motor
control.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Motor voltage: 2.3 kV, 3.3 kV, 4.16 kV or up
to 6.0 kV - 6.9 kV
Power ratings up to 8,000 hp (6,000 kW)
12-pulse diode input rectifier (18 or 24
pulses are also available)
Reduced number of components, which
results in high efficiency and reliability
Assembled in IP41/NEMA1 panel
Multilevel power topology: Neutral Point
Clamped (NPC)
3/5 level up to 4160 V
5/9 level above 6000 V
Power and control sections isolated by fiber
optic cable or optics
Network communication
Dry-type plastic film power capacitors of high
reliability and long useful life
Voltage Source Inverter (VSI)
Air-cooled
High efficiency (> 99%)
High power factor (> 95%)
Low noise level (< 75 dBa)
Low heat dissipation
3300 & 4160V:
2300, 6600 & 6900V:
1.50
Variable Frequency Drives
101
www.pamensky.com
MVW 01 - Specification Table
2300V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Maximum Applicable Motor
Current
(A)
Constant Torque
Variable Torque
CT
VT
HP
KW
HP
KW
120
140
165
175
210
250
280
386
450
490
560
730
855
930
1064
137
160
175
200
240
280
320
440
490
560
640
835
930
1064
1216
500
600
700
750
900
1000
1250
1750
2000
2250
2500
3000
3700
4000
4500
400
450
500
560
710
800
900
1250
1400
1600
1800
2200
2800
3000
3400
600
700
750
900
1000
1250
1500
2000
2250
2500
3000
3500
4000
4500
5000
450
500
560
710
750
900
1120
1400
1600
1600
2200
2500
3000
3400
3700
Frame
Weight
(lb)
Degree of
Protection
Dimensions (in)
HxWxD
Part Number
A
A
A
A
A
A
B
B
B
B
B
C
C
C
C
3,432
3,432
3,432
3,432
3,432
3,432
3,740
3,740
3,740
3,740
3,740
5,940
5,940
5,940
5,940
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 102.36 x 37.80
86.22 x 102.36 x 37.80
86.22 x 102.36 x 37.80
86.22 x 102.36 x 37.80
86.22 x 102.36 x 37.80
86.22 x 157.48 x 37.80
86.22 x 157.48 x 37.80
86.22 x 157.48 x 37.80
86.22 x 157.48 x 37.80
MVW010120T2300ESZ
MVW010140T2300ESZ
MVW010165T2300ESZ
MVW010175T2300ESZ
MVW010210T2300ESZ
MVW010250T2300ESZ
MVW010280T2300ESZ
MVW010386T2300ESZ
MVW010450T2300ESZ
MVW010490T2300ESZ
MVW010560T2300ESZ
MVW010730T2300ESZ
MVW010855T2300ESZ
MVW010930T2300ESZ
MVW011064T2300ESZ
3300V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Maximum Applicable Motor
Current
(A)
Constant Torque
Variable Torque
CT
VT
HP
KW
HP
KW
85
100
112
138
150
160
186
235
265
310
375
500
580
670
880
1178
97
112
128
150
160
182
212
265
312
354
428
571
650
755
1008
1235
500
600
700
800
900
1000
1250
1500
1750
2000
2500
3000
3750
4000
5500
7000
400
450
500
630
710
800
900
1120
1250
1400
1800
2200
2800
3000
4100
5225
600
700
800
900
1000
1250
1500
1750
2000
2250
2750
3750
4000
4500
6000
8000
450
500
630
710
800
900
1120
1250
1400
1600
2000
2800
3000
3300
4500
6000
Frame
Weight
(lb)
Degree of
Protection
Dimensions (in)
HxWxD
Part Number
A
A
A
A
A
A
A
A
A
A
C
C
C
D
D
E
3,432
3,432
3,432
3,432
3,432
3,432
3,432
3,432
3,432
3,432
5,940
5,940
5,940
9,900
9,900
11,000
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 157.48 x 37.80
86.22 x 157.48 x 37.80
86.22 x 157.48 x 37.80
87.52 x 233.07 x 39.57
87.52 x 233.07 x 39.57
87.52 x 283.46 x 39.57
MVW010085T3300ESZ
MVW010100T3300ESZ
MVW010112T3300ESZ
MVW010138T3300ESZ
MVW010150T3300ESZ
MVW010160T3300ESZ
MVW010186T3300ESZ
MVW010235T3300ESZ
MVW010265T3300ESZ
MVW010310T3300ESZ
MVW010375T3300ESZ
MVW010500T3300ESZ
MVW010580T3300ESZ
MVW010670T3300ESZ
MVW010880T3300ESZ
MVW011178T3300ESZ
4160V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Maximum Applicable Motor
Current
(A)
Constant Torque
Variable Torque
CT
VT
HP
KW
HP
KW
70
80
94
110
120
130
162
170
188
250
300
357
475
536
712
950
80
91
107
120
130
148
170
188
214
286
342
403
542
610
815
1086
500
600
700
800
900
1000
1250
1350
1500
2000
2250
3000
4000
4000
5500
7000
400
450
500
630
710
800
900
1000
1120
1400
1600
2250
2900
2900
4100
5225
600
700
800
900
1000
1250
1350
1500
1750
2250
2750
3900
4500
5000
6000
8000
450
500
630
710
800
900
1000
1120
1300
1600
2000
2600
3300
3700
4500
6000
Frame
Weight
(lb)
Degree of
Protection
Dimensions (in)
HxWxD
Part Number
A
A
A
A
A
A
A
A
A
A
C
C
C
D
D
E
3,432
3,432
3,432
3,432
3,432
3,432
3,432
3,432
3,432
3,432
5,940
5,940
5,940
9,900
9,900
11,000
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 94.49 x 37.80
86.22 x 157.48 x 37.80
86.22 x 157.48 x 37.80
86.22 x 157.48 x 37.80
87.52 x 233.07 x 39.57
87.52 x 233.07 x 39.57
87.52 x 283.46 x 39.57
MVW010070T4160ESZ
MVW010080T4160ESZ
MVW010094T4160ESZ
MVW010110T4160ESZ
MVW010120T4160ESZ
MVW010130T4160ESZ
MVW010162T4160ESZ
MVW010170T4160ESZ
MVW010188T4160ESZ
MVW010250T4160ESZ
MVW010300T4160ESZ
MVW010357T4160ESZ
MVW010475T4160ESZ
MVW010536T3300ESZ
MVW010712T4160ESZ
MVW010950T4160ESZ
Variable Frequency Drives
1.51
www.pamensky.com
101
MVW 01 - Specification Table
6000 to 6300V - Three Phase
Electrical Data
Mechanical Data
Constant Torque
Variable Torque
CT
VT
HP
KW
HP
KW
44
59
79
95
107
127
144
164
199
220
253
322
379
440
58
78
104
124
140
166
188
214
260
288
330
420
495
575
500
600
800
900
1000
1350
1500
1750
2250
2500
3000
3700
4500
5000
370
450
600
675
750
1000
1120
1300
1680
1865
2240
2760
3350
3700
600
800
1000
1350
1500
1750
2250
2500
3000
3500
4000
5000
6000
7000
450
600
750
1000
1120
1300
1680
1865
2240
2600
3000
3700
4475
5225
Frame
Weight
(lb)
Degree of
Protection
Dimensions (in)
HxWxD
Part Number
C1
C1
C1
C1
C1
C2
C2
C2
C2
C2
C3
C3
C3
C3
3,740
3,740
3,740
3,740
3,740
6,820
6,820
6,820
6,820
6,820
11,000
11,000
11,000
11,000
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
90.79 x 70.87 x 47.24
90.79 x 70.87 x 47.24
90.79 x 70.87 x 47.24
90.79 x 70.87 x 47.24
90.79 x 70.87 x 47.24
87.64 x 137.87 x 39.57
87.64 x 137.87 x 39.57
87.64 x 137.87 x 39.57
87.64 x 137.87 x 39.57
87.64 x 137.87 x 39.57
87.52 x 182.68 x 39.57
87.52 x 182.68 x 39.57
87.52 x 182.68 x 39.57
87.52 x 182.68 x 39.57
MVW010058T6300ESZ
MVW010078T6300ESZ
MVW010104T6300ESZ
MVW010124T6300ESZ
MVW010140T6300ESZ
MVW010166T6300ESZ
MVW010188T6300ESZ
MVW010214T6300ESZ
MVW010260T6300ESZ
MVW010288T6300ESZ
MVW010330T6300ESZ
MVW010420T6300ESZ
MVW010495T6300ESZ
MVW010575T6300ESZ
6600 to 6900V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Maximum Applicable Motor
Current
(A)
Constant Torque
Variable Torque
CT
VT
HP
KW
HP
KW
40
53
72
85
99
115
130
144
180
203
230
287
345
398
53
70
94
112
130
150
170
188
235
265
300
375
450
520
500
600
800
1000
1250
1350
1500
1750
2250
2500
3000
3700
4500
5000
370
450
600
750
900
1000
1120
1300
1680
1865
2240
2760
3350
3700
600
800
1000
1350
1500
2000
2250
2500
3000
3500
4000
5000
6000
7000
450
600
750
1000
1120
1500
1680
1865
2240
2600
3000
3730
4475
5225
Frame
Weight
(lb)
Degree of
Protection
Dimensions (in)
HxWxD
Part Number
C1
C1
C1
C1
C1
C2
C2
C2
C2
C2
C3
C3
C3
C3
3,740
3,740
3,740
3,740
3,740
6,820
6,820
6,820
6,820
6,820
11,000
11,000
11,000
11,000
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
IP41
90.79 x 70.87 x 47.24
90.79 x 70.87 x 47.24
90.79 x 70.87 x 47.24
90.79 x 70.87 x 47.24
90.79 x 70.87 x 47.24
87.64 x 137.87 x 39.57
87.64 x 137.87 x 39.57
87.64 x 137.87 x 39.57
87.64 x 137.87 x 39.57
87.64 x 137.87 x 39.57
87.52 x 182.68 x 39.57
87.52 x 182.68 x 39.57
87.52 x 182.68 x 39.57
87.52 x 182.68 x 39.57
MVW01C0053T6900ESZ
MVW01C0070T6900ESZ
MVW01C0094T6900ESZ
MVW01C0112T6900ESZ
MVW01C0123T6900ESZ
MVW010150T6900ESZ
MVW010170T6900ESZ
MVW010188T6900ESZ
MVW010235T6900ESZ
MVW010265T6900ESZ
MVW010300T6900ESZ
MVW010375T6900ESZ
MVW010450T6900ESZ
MVW010520T6900ESZ
Notes
•
Power rating guide, specify the MVW01 through the inverter output rated current
•
VT= Variable torque – allowable overload of 115% for 60s, every 10 min
1.52
Purchasing Data
Maximum Applicable Motor
Current
(A)
Variable Frequency Drives
101
www.pamensky.com
MVW 01- Compact Medium Voltage VFD
WEG is a traditional supplier of solutions in speed variation, manufacturing all the parts of a system:
Input switchgear, transformer(dry-type or oil-type), frequency inverter and electric motor.
The MVW01 is designed to control medium voltage induction motors. It features unique innovations,
combining hardware robustness with simplicity, reliability and safety in a compact solution with few
components and state-of-the-art generation technology.
MVW01 follows the same programming
philosophy of the WEG low voltage inverter line,
simplifying its application.
Standard Features
It has a multilevel topology with high-voltage
IGBTs (3.3 or 6.5 kV) and optimal switching
reducing the motor harmonic currents to
extremely low levels. By reducing the number
of components in the drive WEG has made the
MVW-01 more efficient and reliables.
•
•
The multipulse diode configuration of the input
rectifier gives a high power factor in the power
supply meeting IEEE 519 requirements.
In the control stage, it has a multiprocessing
architecture using 32-bit processors (64-bit
bus) with floating point capability and high
performance, ensuring high efficiency in motor
control.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Motor voltage: 2.3 kV, 3.3 kV, 4.16 kV or up
to 6.0 kV - 6.9 kV
Power ratings up to 8,000 hp (6,000 kW)
18-pulse diode input rectifier standard (12
pulse is also available)
Reduced number of components, which
results in high efficiency and reliability
Assembled in IP41/NEMA1 panel
Multilevel power topology: Neutral Point
Clamped (NPC)
3/5 level up to 4160 V
5/9 level above 6000 V
Power and control sections isolated by fiber
optic cable or optics
Network communication
Dry-type plastic film power capacitors of high
reliability and long useful life
Voltage Source Inverter (VSI)
Air-cooled
High efficiency (> 99%)
High power factor (> 95%)
Low noise level (< 75 dBa)
Low heat dissipation
Variable Frequency Drives
1.53
www.pamensky.com
101
MVW 01 Compact - Specification Table
3300V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Maximum Applicable Motor
Current
(A)
Constant Torque
Variable Torque
CT
VT
HP
KW
HP
KW
85
100
112
125
97
112
128
138
500
600
700
800
375
450
525
600
600
700
800
900
450
525
600
675
Frame
Weight
(lb)
Degree of
Protection
Dimensions (in)
HxWxD
Part Number
A0
A0
A0
AO
1,980
1,980
1,980
1,980
IP41
IP41
IP41
IP41
91.18 x 39.37 x 39.45
91.18 x 39.37 x 39.45
91.18 x 39.37 x 39.45
91.18 x 39.37 x 39.45
MVW01C0085T3300ESZ
MVW01C0100T3300ESZ
MVW01C0112T3300ESZ
MVW01C0125T3300ESZ
4160V - Three Phase
Electrical Data
Mechanical Data
Current
(A)
Constant Torque
Variable Torque
CT
VT
HP
KW
HP
KW
70
80
94
110
120
80
91
107
120
130
500
600
700
800
900
375
450
525
600
675
600
700
800
900
1000
450
525
600
675
750
Frame
Weight
(lb)
Degree of
Protection
Dimensions (in)
HxWxD
Part Number
A0
A0
A0
A0
A0
1,980
1,980
1,980
1,980
1,980
IP41
IP41
IP41
IP41
IP41
91.18 x 39.37 x 39.45
91.18 x 39.37 x 39.45
91.18 x 39.37 x 39.45
91.18 x 39.37 x 39.45
91.18 x 39.37 x 39.45
MVW01C0070T4160ESZ
MVW01C0080T4160ESZ
MVW01C0094T4160ESZ
MVW01C0110T4160ESZ
MVW01C0120T4160ESZ
Notes
•
Power rating guide, specify the MVW01 through the inverter output rated current
•
CT= Constant torque – allowable overload of 150% for¨60s, every 10 min
•
VT= Variable torque – allowable overload of 115% for 60s, every 10 min
1.54
Purchasing Data
Maximum Applicable Motor
Variable Frequency Drives
101
www.pamensky.com
MVW 01 - Technical Data
Voltage
Main Power Supply
Auxiliary supply
Protection degree
Dimensions
Environmental Conditions
Finishing
Control
2300, 3300, 4160, 6300 or 6900 V (± 10%, -20% with reduced output power)
Frequency
50 or 60 Hz (specify)± 3%
Phase Unbalance
<3%
Cos 
>0,97
Overvoltage category
Category III
Voltages
220, 380, 400, 415, 440, 460 , 480, 525, 575, 660 or 690 V
Frequency
50 or 60 Hz, )±3 %
Phase Unbalance
<3%
Standard
IP41
Width / Height / Depth (mm)
7 different mechanics (see item 9.4)
Temperature
0 to 40o C (up to 50o C with reduction of 2.5% / oC on the output current)
Humidity
5 to 90% noncondensing
Altitude
0 to 1000 m (up to 4000 m with reduction of 10% / 1000 m)
Pollution degree
2
Color (Standard)
Light Blue cod. 14040 (Doors)
Dark Blue cod 42350 (Base, roof, shutters)
Microprocessor
32 bits
Control Method
PWM sinusoidal SVM (Space Vector Modulation) and optimal pulse patterns (OPP)
Control Types
Scalar (Imposed voltage - V/F), sensorless vector and closed loop vector
Switching Device
High voltage IGBT (HV – IGBT)
Frequency variation
0 to 100 Hz
Overload capacity
Efficiency
150 % for 60 seconds, every 10 min. (1.5 x I rated. – CT)
115 % for 60 seconds, every 10 min. (1.15 x I rated – VT)
99%
V/F
Sensorless
Performance
Speed Control
With Encoder (Use EBA
or EBB card)
Regulation 1 % of rated speed with slip compensation
Resolution: 1 rpm (keypad reference)
Speed regulation: 0.5% of rated speed
Speed variation range:1:100
Regulation:
± 0.1% of rated speed with analog input of 14 bits (EBA);
± 0.1% of rated spedd wth digital reference (keyboard, serial, Fieldbus,
Electronic Potetionmeter, multispeed);
± 0.1% of rated speed with analog input of 10 bits (CC9)
2 Programmable differential inputs ( 10 bits ): 0 to 10 V, 0 to 20 mA ou 4 to 20 mA
Analog
Inputs
1 Programmable bipolar input ( 14 bits ): -10 to + 10 V, 0 to 20 mA or 4...20 mA 1)
1 Programmable isolated input ( 10 bits ): 0 to 10 V, 0 a 20 mA or 4 to 20 mA 1)
1 Programmable isolated input ( 10 bits ): 0 to 10 V, 0 a 20 mA or 4 to 20 mA
8 Programmable isolated inputs: 24 Vdc
Digital
1 Programmable isolated input: 24 Vdc 1)
1 Programmable isolated input: 24 Vdc ( for motor PTC thermistor) 1)
2 Programmable outputs ( 11 bits ) : 0 to 10 V
Analog
Outputs
2 Programmable isolated outputs ( 11 bits ) : 0 to 20 mA or 4 to 20 mA 1)
2 Programmable isolated outputs ( 11 bits ) : 0 to 20 mA or 4 to 20 mA
Relay
5 Programmable outputs, contacts NA/NF ( NO/NC ) : 240 Vac, 1 A
Transistor
2 DC Programmable isolated outputs: 24 Vdc, 50 mA 1)
Serial Interface
Communication
FieldBus Networks
Safety
2 Programmable bipolar outputs ( 14 bits ) : (-10 to + 10) V1)
Protections
(memories of the last 100 faults/
alarms with date and time)
RS-232 (point to point)
RS-485, isolated via EBA or EBB cards (multi-point up to 30 inverters) 1)
Modbus RTU (embedded software) via serial interface RS-485
Ethernet, Profibus DP or DeviceNet via additional kits KFB 1)
Overvoltage in the circuit: intermediate
Output short-circuit
Undervoltage in the circuit: intermediate
Output ground-short-circuit
Overtemperature in the inverter and the motor
External fault
Overcurrent in the output
Failed self-test and programming
Motor overload (I x t)
Failed self-test and programming
Overload in braking resistor
Phase fault in power supply
Failed CPU (Watchdog) / EPROM
Interface MMI-MVW-01 connection fault
Incremental Encoder fault
1) Optional
Variable Frequency Drives
1.55
www.pamensky.com
101
MVW 01 - Technical Data
Electromagnetic
compatibility
Compliances /
Standards
EMC directive 89 / 336 / EEC – industrial environment
CEI Standard - IEC 61800-3 (EMC – Emisson and Immunity)
Adjustable Speed Electrical Power Drive System
CEI - IEC 61800
Part 4 – General Requirements
Part 5 – Safety Requirements
Start / Stop, General Functions Programming
Commands
Increase / Decrease Speed
JOG, FWD/VER and Local/Remote
Speed Reference (rpm)
Keypad
Monitoring
Output Current (A)
Motor Speed (rpm)
Output Voltage (V)
Speed Proportional Value (Ex: ft/min)
Drive Status
Output Frequency (Hz)
Status of Digital Inputs
DC Link Voltage (V)
Status of Digital Outputs
Motor Torque (%)
Status of Relay Outputs
Output Power (kW)
Analog Inputs Value
Hours Powered Up (h)
100 Last Faults with Date and Time
Hours Enabled (h)
Fault / Alert Messages
Keypad with LCD + LED displays
Password to protect drive programming
LCD display language selection: English, Spanish and Portuguese
Fault auto-diagnosis and auto-reset
Parameters reset to factory or user default
Inverter Self-tuning to motor and load (Vector Modes)
Specific unit indication (Ex: l/s, t/h, %, etc.)
Slip compensation (V / Hz Mode)
Manual and Automatic Torque Boost – I x R (V / Hz Mode)
Adjustable V / Hz Curve (V / Hz Mode)
Minimum and maximum speed limits
Maximum current limit
Adjustable motor overload protection
Adjustable digital gain and offset for the analog inputs
Adjustable digital gain for the analog outputs
Standard
JOG function
JOG + / JOG – Function (momentary speed increase/decrease)
COPY Function (Drive Keypad or Keypad Drive)
Comparison functions for the digital outputs:
N* > Nx; N > Nx; N < Nx ; N = 0; N = N*; Is > Ix ; Is < Ix; T > Tx and T < Tx
Where: N = Motor speed; N* = Speed reference; Is = Output Current and T = Motor torque
Linear and “S type” ramps / double ramp
Control features
Independent acceleration and deceleration ramps
Multi-speed function (up to 8 preset speeds)
Special resources (Hour meter and Wattmeter)
Overlapped PID Regulator (for automatic level, flow, pressure, and weight control)
Direction of Rotation selection (FWD/REV)
Local / Remote Operation selection
Flying Start function (restart with a spinning load)
Critical Speed Avoidance (Skip Speed)
Ride-Through function (operation during momentary power loss)
Built-in Modbus RTU (needs the RS-232 or RS-485 interface)
NEMA 4 Remote Keypad (LCD display)
Remote Keypad cable (3.3, 6.6, 10, 16, 25 and 35 ft)
Remote Keypad frame kit
Options
Expansion Boards with special functions
Profibus-DP
DeviceNet
SUPERDRIVE G2 Kit with RS-232 Serial Interface Communication (Drive - PC)
1.56
Variable Frequency Drives
101
www.pamensky.com
SSW 05 Plus - Soft Starter
The SSW-05 Plus Micro Soft-Starters, with DSP control (Digital Signal Processor) have been
designed to supply excellent performance during starting and stopping of electric motors with an
excellent cost effectiveness ratio. The Operator Interface allows easy parameter setting, simplifying
the start-up and operation activities. The SSW-05 Plus Micro Soft-Starters are compact, optimizating
space in electrical panels. The SSW-05 Plus already incorporates protection for the driven motor.
Standard Features
Optional Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
208 - 460V, 460-575V 50/60Hz input power
supply
Duty cycle: 300% rated current during 10
seconds, 4 starts per hour
Built-in bypass contacts
One digital input for Start/Stop
(90 - 250 Vac)
One digital input for Fault Reset
(90 - 250 Vac)
One relay output for Run indication
(1 Amp - 250V)
One relay output for Full Voltage indication
(1 Amp - 250V)
RS-232 serial port
Adjustable acceleration and deceleration
ramps (1 - 20 seconds)
Adjustable pedestal voltage
(30 - 80% of line voltage)
Protective features: Motor overload, over
current and locked rotor, SCR overload,
phase loss and phase sequence
DIN rail or direct mount
Ambient: 32ºF (0ºC) to 131ºF (55ºC), 3300ft
(1000m) altitude, 90% non-condensing
humidity
Remote Keypad
PC Programming Software
Soft Starters
2.1
www.pamensky.com
101
SSW-05 - Part Number Specification
SSW05
0010
T
2246
E
P
--
--
Z
1
2
3
4
5
6
7
8
9
1.
Soft-Starter line SSW-05
2.
Output Rated Current
3.
Power Supply:
T = Three-phase
4.
Power Supply Voltage:
2246 = 220 ... 460 V
4657 = 460 ... 575 V
5.
Language:
P = Portuguese
E = English
G = German
S = Spanish
0003 = 3 A
0010 = 10 A
0016 = 16 A
0023 = 23 A
0030 = 30 A
0045 = 45 A
0060 = 60 A
0085 = 85 A
* Selection Table for 2
6.
Product Version:
P = Plus
7.
Special Hardware:
Blank = Standard (not available)
Hx = Optional version x (H1 ... Hn)
8.
Special Software:
Blank = Standard (not available)
Sx = Optional version x (S1 ... Sn)
9.
End of Part Number:
Z
Example:
SSW050060T4657PPZ
2.2
Soft Starters
101
www.pamensky.com
SSW 05 Plus - Table of Products
230-460V - Three Phase
Electrical Data
Mechanical Data
Maximum Applicable Motor
Current
(A)
HP
Kw
Voltage
3
10
16
23
30
45
60
85
0.75
3
5
7.5
10
15
20
30
0.55
2.2
3.7
5.5
7.5
11
15
22
230
230
230
230
230
230
230
230
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
1
1
1
1
1
2
2
2
1.63
1.63
1.63
1.63
1.63
3.68
3.68
3.68
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
7.3 x 3.1 x 6.8
7.3 x 3.1 x 6.8
7.3 x 3.1 x 6.8
SSW050003T2246EPZ
SSW050010T2246EPZ
SSW050016T2246EPZ
SSW050023T2246EPZ
SSW050030T2246EPZ
SSW050045T2246EPZ
SSW050060T2246EPZ
SSW050085T2246EPZ
$ 581
594
654
705
757
974
1,191
1,432
230-460V - Three Phase
Electrical Data
Mechanical Data
Maximum Applicable Motor
Current
(A)
HP
Kw
Voltage
3
10
16
23
30
45
60
85
1.5
5
10
15
20
30
40
60
1.1
307
7.5
11
15
22
30
45
460
460
460
460
460
460
460
460
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
1
1
1
1
1
2
2
2
1.63
1.63
1.63
1.63
1.63
3.68
3.68
3.68
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
7.3 x 3.1 x 6.8
7.3 x 3.1 x 6.8
7.3 x 3.1 x 6.8
SSW050003T2246EPZ
SSW050010T2246EPZ
SSW050016T2246EPZ
SSW050023T2246EPZ
SSW050030T2246EPZ
SSW050045T2246EPZ
SSW050060T2246EPZ
SSW050085T2246EPZ
$ 581
594
654
705
757
974
1,191
1,432
460-575V - Three Phase
Electrical Data
Mechanical Data
Maximum Applicable Motor
Current
(A)
HP
Kw
Voltage
3
10
16
23
30
45
60
85
2
7.5
10
20
25
40
50
75
1.5
5.5
7.5
15
18.5
30
37
55
575
575
575
575
575
575
575
575
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
1
1
1
1
1
2
2
2
1.63
1.63
1.63
1.63
1.63
3.68
3.68
3.68
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
5.1 x 2.3 x 5.7
7.3 x 3.1 x 6.8
7.3 x 3.1 x 6.8
7.3 x 3.1 x 6.8
SSW050003T4657EPZ
SSW050010T4657EPZ
SSW050016T4657EPZ
SSW050023T4657EPZ
SSW050030T4657EPZ
SSW050045T4657EPZ
SSW050060T4657EPZ
SSW050085T4657EPZ
$ 581
594
654
705
757
974
1,191
1,432
Soft Starters
2.3
www.pamensky.com
101
SSW 05 - Accessories
Accessories
Keypad and Keypad Cables
Description
Remote Keypad with LED Display
1m (3.3 ft.) Remote Keypad Cable
2m (6.6 ft.) Remote Keypad Cable
3m (10 ft.) Remote Keypad Cable
5m (15 ft.) Remote Keypad Cable
7.5m (25 ft.) Remote Keypad Cable
10m (33 ft.) Remote Keypad Cable
Part Number
List Price
SSW05HMIRS
CAB-RS-1
CAB-RS-2
CAB-RS-3
CAB-RS-5
CAB-RS-7.5
CAB-RS-10
$130
23
31
42
52
62
73
SSW 05 - Technical Data
Voltage
Power Supply
Enclosure
Control
Starting Duty Cycle
Inputs
Outputs
Communication
Safety
Functions
Resources
Ambient
Frequency
Electronic Supply
Injected Plastic Case
Method
CPU
Standard
Digital
Digital
Serial Interface
Protections
Starting Voltage
Programmable Acceleration
Ramp
Programmable Deceleration
Ramp
Motor Rated Current and SoftStarter Rated Current Ratio
Temperature
Humidity
Altitude
Finishing
Installation
Conformities /
Standards
2.4
Color
Fixing
Safety
Low Voltage
EMC
220 - 460 Vac (+10%, -15%)
460 - 575 Vac (+10%, -15%)
50 / 60 Hz
Switched mode power supply (90 – 250 Vac )
IP00
Motor Voltage Variation
DSP type microprocessor
300% ( 3 x Inom. ) during 10 s, 4 starts per hour
1 input for starting and stopping
1 input for error reset
1 relay output for full voltage indication (By-Pass)
1 relay output for operation indication
RS-232C
Motor overload
Phase sequence
Phase loss
Locked rotor
SCRs overload
Overcurrent
Internal fault (watchdog)
30 - 80% of the rated voltage
1 – 20 s
Off – 20 s
30 - 100%
0 ... 55ºC - standard operation at rated current
0 ... 90% non condensing
0 ... 1000 m (3,300 ft) - standard operation at rated current
1000...4000m - with current derating (1%/ 100 m (328 ft) above 1000m (13.300ft)
Ultra mat gray (cover) and ultra mat blue (base) WEG standard
Fixing by bolts or assembly on DIN 35 mm rail
UL 508 Standard – Industrial Control Equipment / IRAM
IEC 60947-4-2
EMC Directive 89 / 336 / EEC - Industrial Environment
Soft Starters
101
www.pamensky.com
SSW 06 - Soft Starter
WEG SSW-06 series soft-starters are microprocessor controlled and designed to start and
stop induction motors. Excellent acceleration
and deceleration control is achieved with an
optimized cost to benefit ratio.
Standard Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
220 - 575V, 50/60Hz input power supply
(-15/+10%)
Built-in run rated (AC1) bypass contactor
Duty cycle: 300% full load amps for 30
seconds, 10 starts per hour
Voltage ramp or current limit start modes
Detachable keypad with dual display
(LCD and LED) and copy function
90 - 250Vac auxiliary control voltage
Single 32 bit RISC processor based control
board
IP00 protected chassis enclosure
Six isolated 24Vdc programmable digital
inputs
Three programmable relay outputs (2 Amp 250V)
One 0 - 10Vdc programmable analog output
One 4 - 20mA programmable analog output
Motor PTC thermistor input
RS-232 serial interface
Adjustable acceleration (1-999 seconds) and
deceleration ramps (0 - 299 seconds)
Adjustable pedestal voltage (25 - 90% of line
voltage)
Current limitation from 150-500% torque
control
•
•
•
•
•
Diagnostic features: Motor overload, over
current and phase loss, motor immediate
over and under current, SCR over
temperature and fault, line phase loss and
phase sequence, line over and under voltage
Display readings: Motor current, voltage, kW
and power factor, line voltage and frequency,
four last fault trips, run and power-up timers
Ambient: 32ºF (0ºC) to 131ºF (55ºC), 3300
ft (1000m) altitude, 90% non-condensing
humidity
Braking capabilities: Reverse Braking, Optimal
Braking, DC Braking
ModBUS ( Built-in)
Optional Features
•
•
•
•
•
•
•
RS-485 serial interface
Remote keypad cables and mounting frame
PC programming software
Profibus Expansion Board
DeviceNet Expansion Board
Ethernet TCP/IP
USB Communication Kit
Soft Starters
2.5
www.pamensky.com
101
SSW-06 - Part Number Specification
SSW06
0085
T
2223
P
O
--
--
--
S1
Z
1
2
3
4
5
6
7
8
9
10
11
1.
SSW-06 Soft Starter
2.
Output Rated Current
3.
Power Supply:
T = Three-phase
4.
Power Supply Voltage:
2257 = 220… 575 V
5769 = 575... 690V
5.
Language:
P = Portuguese
E = English
S = Spanish
0010 = 10A
0016 = 16A
0023 = 23A
0030 = 30A
0045 = 45A
0060 = 60A
0085 = 85A
0130 = 130A
0170 = 170A
0205 = 205A
0255 = 255A
0312 = 312A
0365 = 365A
0412 = 412A
* Selection Table for 2
6.
Product Version:
S = Standard
O = With options
7.
Degree of Protection
(IP):
blank = Standard (see technical specifications table)
8.
HMI - Human Machine
Interface:
Blank = Standard (with LED + LCD HMI)
SI = Without HMI
9.
Special Hardware:
Blank = Standard
H1 = Fan 115V (950A model)
H2 = Fan 220V (950A up to 1400A model)
10.
Special Software:
Blank = Standard
S1 = optional with special sofware version
11.
End of Part Number:
Z
Note:
1 - Communication kits are optional
2 - From 950A up to 1400A models the ventilation voltage must be defined (H1 or H2)
3 - 575... 690V are not UL certified
4 - Up to 820A standard built-in bypass
2.6
Soft Starters
0480 = 480A
0604 = 604A
0670 = 670A
0820 = 820A
0950 = 950A
1100 = 1100A
1400 = 1400A
101
www.pamensky.com
SSW 06 - Table of Products
230V - Three Phase
Electrical Data
Mechanical Data
Maximum Applicable Motor
Current
(A)
10
16
23
30
45
60
85
130
170
205
255
312
365
412
480
604
670
820
950
1100
1400
3 Leads
6 Leads
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
1
1
1
1
2
2
2
2
3
3
4
4
4
5
5
5
6
6
7
8
8
7.3
7.3
7.3
7.3
18.7
18.7
18.7
18.7
40.8
40.8
91.5
91.5
91.5
121
121
121
265
265
236
480
480
IP20
IP20
IP20
IP20
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
10.08 x 5.20 x 7.16
10.08 x 5.20 x 7.16
10.08 x 5.20 x 7.16
10.08 x 5.20 x 7.16
14.57 x 5.20 x 9.61
14.57 x 5.20 x 9.61
14.57 x 5.20 x 9.61
14.57 x 5.20 x 9.61
17.32 x 8.78 x 10.94
17.32 x 8.78 x 10.94
21.65 x 14.57 x 12.24
21.65 x 14.57 x 12.24
21.65 x 14.57 x 12.24
25.59 x 14.57 x 13.66
25.59 x 14.57 x 13.66
25.59 x 14.57 x 13.66
31.30 x 21.26 x 14.05
31.30 x 21.26 x 14.05
33.27 x 22.44 x 13.66
45.16 x 26.97 x 17.01
45.16 x 26.97 x 17.01
SSW060010T2257ESZ
SSW060016T2257ESZ
SSW060023T2257ESZ
SSW060030T2257ESZ
SSW060045T2257ESZ
SSW060060T2257ESZ
SSW060085T2257ESZ
SSW060130T2257ESZ
SSW060170T2257ESZ
SSW060205T2257ESZ
SSW060255T2257ESZ
SSW060312T2257ESZ
SSW060365T2257ESZ
SSW060412T2257ESZ
SSW060480T2257ESZ
SSW060604T2257ESZ
SSW060670T2257ESZ
SSW060820T2257ESZ
SSW060950T2257ESZ
SSW061100T2257ESZ
SSW061400T2257ESZ
$1,559
1,608
1,768
1,915
2,223
2,453
3,008
3,760
4,605
5,791
8,021
8,509
8,643
10,142
12,556
14,005
15,936
18,832
28,491
35,737
45,876
Voltage
HP
Kw
HP
Kw
3
5
7.5
10
15
20
30
50
60
75
100
125
150
150
200
250
250
300
350
450
500
2.2
3.7
5.5
7.5
11
15
22
37
45
55
75
90
110
110
150
185
185
225
260
330
370
25
30
50
75
100
125
150
200
250
-
18.5
22
37
55
75
90
110
150
185
-
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
460V - Three Phase
Electrical Data
Mechanical Data
Maximum Applicable Motor
Current
(A)
10
16
23
30
45
60
85
130
170
205
255
312
365
412
480
604
670
820
950
1100
1400
Notes:
3 Leads
Purchasing Data
6 Leads
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
1
1
1
1
2
2
2
2
3
3
4
4
4
5
5
5
6
6
7
8
8
7.3
7.3
7.3
7.3
18.7
18.7
19
19
41
41
91
91
91
121
121
121
265
265
236
480
480
IP20
IP20
IP20
IP20
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
10.08 x 5.20 x 7.16
10.08 x 5.20 x 7.16
10.08 x 5.20 x 7.16
10.08 x 5.20 x 7.16
14.57 x 5.20 x 9.61
14.57 x 5.20 x 9.61
14.57 x 5.20 x 9.61
14.57 x 5.20 x 9.61
17.32 x 8.78 x 10.94
17.32 x 8.78 x 10.94
21.65 x 14.57 x 12.24
21.65 x 14.57 x 12.24
21.65 x 14.57 x 12.24
25.59 x 14.57 x 13.66
25.59 x 14.57 x 13.66
25.59 x 14.57 x 13.66
31.30 x 21.26 x 14.05
31.30 x 21.26 x 14.05
33.27 x 22.44 x 13.66
45.16 x 26.97 x 17.01
45.16 x 26.97 x 17.01
SSW060010T2257ESZ
SSW060016T2257ESZ
SSW060023T2257ESZ
SSW060030T2257ESZ
SSW060045T2257ESZ
SSW060060T2257ESZ
SSW060085T2257ESZ
SSW060130T2257ESZ
SSW060170T2257ESZ
SSW060205T2257ESZ
SSW060255T2257ESZ
SSW060312T2257ESZ
SSW060365T2257ESZ
SSW060412T2257ESZ
SSW060480T2257ESZ
SSW060604T2257ESZ
SSW060670T2257ESZ
SSW060820T2257ESZ
SSW060950T2257ESZ
SSW061100T2257ESZ
SSW061400T2257ESZ
$1,559
1,608
1,768
1,915
2,223
2,453
3,008
3,760
4,605
5,791
8,021
8,509
8,643
10,142
12,556
14,005
15,936
18,832
28,491
35,737
45,876
Voltage
HP
Kw
HP
Kw
5
10
15
20
30
40
60
100
125
150
200
250
300
350
400
500
550
600
700
800
1050
3.7
7.5
11
15
22
30
45
75
90
110
150
185
225
260
300
370
410
450
525
600
775
60
75
100
150
200
250
350
450
500
550
650
800
900
1150
1350
1600
2000
45
55
75
110
150
185
260
330
370
410
485
600
670
820
1000
1175
1475
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
460
Purchasing Data
3 Leads - Inline Connection
6 Leads - Inside Delta Connection
Soft Starters
2.7
www.pamensky.com
101
SSW 06 - Table of Products
575V - Three Phase
Electrical Data
Mechanical Data
Maximum Applicable Motor
Current
(A)
10
16
23
30
45
60
85
130
170
205
255
312
365
412
480
604
670
820
950
1100
1400
Notes:
2.8
3 Leads
6 Leads
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
1
1
1
1
2
2
2
2
3
3
4
4
4
5
5
5
6
6
7
8
8
7.3
7.3
7.3
7.3
18.7
18.7
19
19
41
41
91
91
91
121
121
121
265
265
236
480
480
IP20
IP20
IP20
IP20
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
IP00
10.08 x 5.20 x 7.16
10.08 x 5.20 x 7.16
10.08 x 5.20 x 7.16
10.08 x 5.20 x 7.16
14.57 x 5.20 x 9.61
14.57 x 5.20 x 9.61
14.57 x 5.20 x 9.61
14.57 x 5.20 x 9.61
17.32 x 8.78 x 10.94
17.32 x 8.78 x 10.94
21.65 x 14.57 x 12.24
21.65 x 14.57 x 12.24
21.65 x 14.57 x 12.24
25.59 x 14.57 x 13.66
25.59 x 14.57 x 13.66
25.59 x 14.57 x 13.66
31.30 x 21.26 x 14.05
31.30 x 21.26 x 14.05
33.27 x 22.44 x 13.66
45.16 x 26.97 x 17.01
45.16 x 26.97 x 17.01
SSW060010T5257ESZ
SSW060016T5257ESZ
SSW060023T5257ESZ
SSW060030T5257ESZ
SSW060045T5257ESZ
SSW060060T5257ESZ
SSW060085T5257ESZ
SSW060130T5257ESZ
SSW060170T5257ESZ
SSW060205T5257ESZ
SSW060255T5257ESZ
SSW060312T5257ESZ
SSW060365T5257ESZ
SSW060412T5257ESZ
SSW060480T5257ESZ
SSW060604T5257ESZ
SSW060670T5257ESZ
SSW060820T5257ESZ
SSW060950T5257ESZ
SSW061100T5257ESZ
SSW061400T5257ESZ
$1,559
1,608
1,768
1,915
2,223
2,453
3,008
3,760
4,605
5,791
8,021
8,509
8,643
10,142
12,556
14,005
15,936
18,832
28,491
35,737
45,876
Voltage
HP
Kw
HP
Kw
7.5
10
20
25
40
50
75
125
150
200
250
300
350
450
500
600
650
750
850
1000
1300
5.5
7.5
15
18.5
30
37
55
90
110
150
185
225
260
330
370
450
485
550
630
750
1000
75
100
150
200
300
350
450
550
650
750
850
1100
1200
1500
1750
2000
2500
55
75
110
150
220
260
330
410
485
550
630
800
900
1200
1290
1475
1850
575
575
575
575
575
575
575
575
575
575
575
575
575
575
575
575
575
575
575
575
575
Purchasing Data
3 Leads - Inline Connection
6 Leads - Inside Delta Connection
Soft Starters
101
www.pamensky.com
SSW 06 - Accessories
Keypad and Keypad Cables
Description
Local Keypad with LED and LCD
Remote Keypad Frame Kit
1m (3.3 ft) Remote Keypad Cable
2m (6.6 ft) Remote Keypad Cable
3m (10 ft) Remote Keypad Cable
5m (16 ft) Remote Keypad Cable
7.5m (25 ft) Remote Keypad Cable (Requires CFW09KMR09)
10m (33 ft) Remote Keypad Cable (Requires CFW09KMR09)
Part Number
List Price
SSW06HMILCD
KMR-SSW-06
CFW09HMI091
CFW09HMI092
CFW09HMI093
CFW09HMI095
CFW09HMI097
CFW09HMI0910
$230
31
31
39
50
75
88
108
Part Number
List Price
KFB PD SSW06
KFB DN SSW06
KRS 485
KFB ENIP SSW06
$1,045
897
183
2,070
Part Number
List Price
KIT IP20 SSW06 M2
KIT IP20 SSW06 M3
KIT IP20 SSW06 M4/M5
KIT IP20 SSW06 M6
$210
236
254
517
Part Number
List Price
SSW06 KEIO
$758
Communication
Description
Profibus DP Communication Kit
DeviceNet Communication Kit
Interface for RS-485 Communication
Ethernet/IP Communication Kit
IP20 Kits
Description
SSW06 IP20 Kit - Frame Size 2
SSW06 IP20 Kit - Frame Size 3
SSW06 IP20 Kit - Frame Size 4 & 5
SSW06 IP20 Kit - Frame Size 6
I/O Expansion
Description
I/Os Expansion Module for SoftPLC applications
Soft Starters
2.9
www.pamensky.com
101
SSW 06 - Technical Data
Power
Control
Power Supply
Degree of protection
Fan
Frequency
Metallic cabinet
Control method
CPU
Control
Types of control
Starting Duty cycles
(10 starts / hour)
Inputs
Rated
Heavy
Digital
Relay
Outputs
Safety
Functions/resources
2.10
Analog
Protections
Standard
220 to 575 Vac -15% to +10%, or 198 to 632 Vac
110 to 230 Vac -15% to +10%, or 94 to 253 Vac
Models from 255 to 820 A: 115 Vac (104 to 127) Vac / 230 vac (207 to 253) Vac
Model 950 A: 115 Vac (103,5 to 122) Vac / 230 Vac (207 to 243,8) Vac
Models from 1100 to 1400 A: 230 vac (207 to 243,8) Vac
50 to 60 Hz (+/- 10%), or 45 to 66 Hz
IP00
Motor voltage variation (Three phase induction motor)
32-Bit RISC microcontroller
Voltage ramp
Current limitation
Current limitation ramp
Pump control
Torque control 1, 2 or 3 points
300% (3 x I nom.) during 30 s for 3-cable connection and during 25 s for 6-cable connection
450% (4,5 x I nom.) during 30 s with 33% rated current reduction;
450 % ( 4,5 x I nom.) during 25 s for 6-cable connection
5 x 24 Vdc isolated programmable inputs
1 x 24 Vdc insolated programmable input for motor PTC
3 programmable outputs 250 Vac / 2 A: (2 x NA) + (1 x NO + NC – Fault)
1 Programmable output (11 bits) 0…10 Vdc
1 programmable output (11 bits) 0...20 mA or 4...20 mA
Overvoltage
Power supply phase loss
Undervoltage
Output phase loss (motor)
Voltage imbalance
Thyristor failure
Undercurrent
CPU failure (watch dog)
Overcurrent
Programming error
Current imbalance
Serial communication error
Overload (motor) – i²t
Self-check error
Thyristors over temperature
HMI-SSW06 communication error
Motor over temperature / PTC
Starting time expired
Phase sequence failure
Fieldbus communication error
External fault
Serial communication error
Open by-pass contact failure (1)
Undervoltage in the electronic board
Closed by-pass contact failure (1)
Frequency out of range
Overcurrent in the by-pass (1)
Undercurrent before by-pass closing (1)
Removable human-machine interface with double display LED + LCD
Programming access password
HMI language selection: Portuguese, English, Spanish and German
Control type selection: Voltage ramp, current limitation, current
Limitation ramp, pump control and torque control
Local/ Remote operation selection
Self-checking and automatic fault reset
Oriented start-up according to the control type
Standard or within-the-delta (6 leads) connection
All protections and functions available in both types of connection to the motor
PUMP CONTROL function (protection against “water hammer” in pumps)
COPY function (Soft-starter to HMI or HMI to soft-starter)
Built-in by-pass for the models 85 to 820 A
Serial interface RS-232 with Modbus RTU protocol. RS-485 optional
Insolated input for motor PTC
Standard or user parameters reset (Brings back the standard or user values)
Special features: Running hours
Programmable over and undervoltage and voltage imbalance between phases
Programmable over and undercurrent and current imbalance between phases
Under and overcurrent before by-pass
Programmable immediate overcurrent
Programmable time for immediate overcurrent
Programmable immediate undercurrent
Programmable time for immediate undercurrent
Programmable line nominal voltage
Fully programmable voltage ramp
Programmable current limitation
Programmable current ramp
Programmable pump control
Fully flexible torque control
Auto reset of the programmable thermal memory
Thermal class protection (motor overload) programmable from class 5 to 45.
Soft Starters
101
www.pamensky.com
SSW 06 - Technical Data
Functions/resources
Optional
Frame for remote HMI
Controls
Human-Machine
Interface
(HMI-SSW06-LCD)
Supervision
Temperature
Enviroment Conditions Humdity
Altitude
Finishing Painting
Standards
Color
Safety
Low voltage
EMC
UL (USA) / cUL (Canadá)
CE (Europe)
IRAM (Argentina)
C-Tick (Australia)
Cable to interconnect the soft-starter with the remote HMI 1, 2, 3 and 5 m
Rs-485 communication kit
PROFIBUS-DP communication kit
Device Net communication kit
IP20 protection for the models from 85 up to 820 A
Start, stop, reset and parameterization (main functions programming)
Increase and decrease parameters and their values
Motor current (% Soft-starter In)
Motor current (% Motor In)
Motor current (A)
Line frequency (0…99.9 Hz)
Line voltage (0…999 V)
Output voltage (0…999 V)
Motor torque (% motor I n)
Load active power – (kW)
Load apparent power – (kVA)
Soft-starter status
Digital and analog inputs and outputs status
Load Cos φ (0.00 – 0.99)
Energized hours
Enabled hours
Last six error codes memory
Soft-starter software version
0 to 55ºC (Models from 85 to 820 A) standard operation at rated current
0 to 40ºC (Models from 950 to 1400 A) standard operation at rated current
5...90 %, non-condensing
0... 1000 m: standard operation at rated current
1000... 4000 m; with output current reduction of 1%/100 m, over 1000 m
Cover: ultra mat gray
Cabinet: ultra mat blue
UL 508 Standard – Industrial control equipment (2)
EN 60947-4-2 Standard; LVD 73/23/EEC – Low voltage directive
EMC directive 89 / 336 / EEC – Industrial environment
Underwritters Laboratories Inc. – USA (2)
Certified by EPCOS
Instituto Argentino de Normalización (2)
Australian Communications Authority
Notes: (1) Models from 10A to 820A
(2) Models from 85A to 1400A approved
Soft Starters
2.11
www.pamensky.com
101
SSW 07 - Soft Starter
The SSW-07 Soft Starter from WEG was designed for high
performance starting and stopping while providing an excellent
cost-benefit ratio. The Starter is designed to be easily set-up and
makes start up and daily activities simpler. Excellent for applications
with heavy loads, the SSW-07 is suitable for Crusher applications
as well as conveyors, hammer mills, centrifuges and many others.
Standard Features
Optional Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Strong reduction on mechanical stresses
over the coupling and transmission devices
(gearboxes, pulleys, gears, conveyors, etc.)
during the start
Eliminates mechanical shock
Increases motor and machine mechanical
equipment lifetime due to the elimination of
mechanical shock
Easy operation, setup, maintenance &
installation
Simple electric installation
Operates in environments up to 55ºC (without
current reduction for all models)
Integral, electronic motor protection
Built-in electronic thermal relay
Avoids the “Water Hammer” in pump
applications
Limitation of voltage drop during start
Universal voltage (220 to 575 Vac)
Switched type power supply with EMC filter
for the control electronics (110 to 240 Vac)
Voltage monitoring of the electronics to backup l2t values (thermal image)
Local Keypad
2.12
RS 485 Serial Interface
RS 232 Serial Interface
Remote keypad
PTC Kit
IP20 Kit for M3
Soft Starters
101
www.pamensky.com
SSW-07 - Part Number Specification
SSW07
0017
T
5
S
--
--
--
Z
1
2
3
4
5
6
7
8
9
1.
SSW-07 Soft Starter
2.
Output Rated Current
3.
Power Supply:
T = Three-phase
4.
Power Supply Voltage:
5 = 220 to 575 V
5.
Product Version:
S = Standard
O = With options
6.
Enclosure:
blank = Standard (see technical specifications table)
IP = IP20 for models from 130 A to 412 A
7.
Special Hardware:
Blank = Standard
8.
Special Software:
Blank = Standard
9.
End of Part Number:
Z
0017 = 17A
0024 = 24A
0030 = 30A
0045 = 45A
0061 = 61A
0085 = 85A
0130 = 130A
Soft Starters
0171 = 171A
0200 = 200A
0255 = 255A
0312 = 312A
0365 = 365A
0412 = 412A
* Selection Table for 2
2.13
www.pamensky.com
101
SSW 07 - Table of Products
230V - Three Phase
Electrical Data
Mechanical Data
Maximum Applicable Motor
Current
(A)
HP
Kw
Voltage
17
24
30
45
61
85
130
171
200
255
312
365
412
5
7,5
10
15
20
30
50
60
75
100
125
150
150
3.7
5.5
7.5
11
15
22
37
45
55
75
90
110
110
230
230
230
230
230
230
230
230
230
230
230
230
230
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
1
1
1
2
2
2
3
3
3
4
4
4
4
2.90
2.90
2.90
7.28
7.28
7.28
16.80
16.80
16.80
20.32
20.32
20.32
20.32
iP20
iP20
iP20
iP20
iP20
iP20
IP00
IP00
IP00
IP00
IP00
IP00
IP00
6.38 x 3.74 x 6.18
6.38 x 3.74 x 6.18
6.38 x 3.74 x 6.18
8.19 x 5.67 x 7.99
8.19 x 5.67 x 7.99
8.19 x 5.67 x 7.99
10.90 x 8.78 x 8.66
10.90 x 8.78 x 8.66
10.90 x 8.78 x 8.66
13.00 x 8.94 x 9.53
13.00 x 8.94 x 9.53
13.00 x 8.94 x 9.53
13.00 x 8.94 x 9.53
SSW070017T5SZ
SSW070024T5SZ
SSW070030T5SZ
SSW070045T5SZ
SSW070061T5SZ
SSW070085T5SZ
SSW070130T5SZ
SSW070171T5SZ
SSW070200T5SZ
SSW070255T5SH1Z
SSW070312T5SH1Z
SSW070365T5SH1Z
SSW070412T5SH1Z
$1,266
1,346
1,386
1,558
1,736
2,070
2,560
3,210
3,778
5,026
5,457
5,671
6,655
460V - Three Phase
Electrical Data
Mechanical Data
Maximum Applicable Motor
Current
(A)
HP
Kw
Voltage
17
24
30
45
61
85
130
171
200
255
312
365
412
10
15
20
30
40
60
100
125
150
200
250
300
350
7.5
11
15
22
30
45
75
90
110
160
185
220
260
460
460
460
460
460
460
460
460
460
460
460
460
460
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
1
1
1
2
2
2
3
3
3
4
4
4
4
2.90
2.90
2.90
7.28
7.28
7.28
16.80
16.80
16.80
20.32
20.32
20.32
20.32
iP20
iP20
iP20
iP20
iP20
iP20
IP00
IP00
IP00
IP00
IP00
IP00
IP00
6.38 x 3.74 x 6.18
6.38 x 3.74 x 6.18
6.38 x 3.74 x 6.18
8.19 x 5.67 x 7.99
8.19 x 5.67 x 7.99
8.19 x 5.67 x 7.99
10.90 x 8.78 x 8.66
10.90 x 8.78 x 8.66
10.90 x 8.78 x 8.66
13.00 x 8.94 x 9.53
13.00 x 8.94 x 9.53
13.00 x 8.94 x 9.53
13.00 x 8.94 x 9.53
SSW070017T5SZ
SSW070024T5SZ
SSW070030T5SZ
SSW070045T5SZ
SSW070061T5SZ
SSW070085T5SZ
SSW070130T5SZ
SSW070171T5SZ
SSW070200T5SZ
SSW070255T5SH1Z
SSW070312T5SH1Z
SSW070365T5SH1Z
SSW070412T5SH1Z
$1,266
1,346
1,386
1,558
1,736
2,070
2,560
3,210
3,778
5,026
5,457
5,671
6,655
575V - Three Phase
Electrical Data
Mechanical Data
Maximum Applicable Motor
Current
(A)
HP
Kw
Voltage
17
24
30
45
61
85
130
171
200
255
312
365
412
15
20
25
40
50
75
125
150
200
250
300
350
400
11
15
18.5
30
37
55
90
110
150
185
220
260
330
575
575
575
575
575
575
575
575
575
575
575
575
575
2.14
Purchasing Data
Purchasing Data
Frame
Weight
(lb)
Degree of
Protection
Dimensions
(in)
HxWxD
Part Number
List
Price
1
1
1
2
2
2
3
3
3
4
4
4
4
2.90
2.90
2.90
7.28
7.28
7.28
16.80
16.80
16.80
20.32
20.32
20.32
20.32
iP20
iP20
iP20
iP20
iP20
iP20
IP00
IP00
IP00
IP00
IP00
IP00
IP00
6.38 x 3.74 x 6.18
6.38 x 3.74 x 6.18
6.38 x 3.74 x 6.18
8.19 x 5.67 x 7.99
8.19 x 5.67 x 7.99
8.19 x 5.67 x 7.99
10.90 x 8.78 x 8.66
10.90 x 8.78 x 8.66
10.90 x 8.78 x 8.66
13.00 x 8.94 x 9.53
13.00 x 8.94 x 9.53
13.00 x 8.94 x 9.53
13.00 x 8.94 x 9.53
SSW070017T5SZ
SSW070024T5SZ
SSW070030T5SZ
SSW070045T5SZ
SSW070061T5SZ
SSW070085T5SZ
SSW070130T5SZ
SSW070171T5SZ
SSW070200T5SZ
SSW070255T5SH1Z
SSW070312T5SH1Z
SSW070365T5SH1Z
SSW070412T5SH1Z
$1,266
1,346
1,386
1,558
1,736
2,070
2,560
3,210
3,778
5,026
5,457
5,671
6,655
Soft Starters
101
www.pamensky.com
SSW 07 - Accessories
Keypad and Keypad Cables
Description
Local Keypad
Remote Keypad Kit
1m (3.3 ft.) Remote Keypad Cable
2m (6.6 ft.) Remote Keypad Cable
3m (10 ft.) Remote Keypad Cable
5m (15 ft.) Remote Keypad Cable
7.5m (25 ft.) Remote Keypad Cable
10m (33 ft.) Remote Keypad Cable
Part Number
List Price
HMI-LOCAL-SSW07/08
HMI-REMOTE-SSW07
CAB-RS-1
CAB-RS-2
CAB-RS-3
CAB-RS-5
CAB-RS-7.5
CAB-RS-10
$160
312
23
31
42
52
62
73
Part Number
List Price
KRS-232-SSW07/08
KRS-485-SSW07/08
$128
150
Part Number
List Price
SSW07M2V.K
SSW07M3V.K
KITPTCSSW07/08
KITIP20SIZE3
KITIP20SIZE4
$70
101
118
60
115
Communication
Description
RS-232 Communication Kit
RS-485 Communication Kit
Kits
Description
Ventilation Kit M2 (Frame Size 2, 45 to 85A)
Ventilation Kit M3 (Frame Size 3, 130 to 200A)
PTC Kit for motor
IP20 Kit for M3 (Frame Size 3, 130 to 200A)
IP20 Kit for M4 (Frame Size 4, 255 to 412A)
Soft Starters
2.15
www.pamensky.com
101
SSW 07 - Technical Data
Power Supply
Degree of
protection
Control
Power
Control
Frequency
Injected plastic case
Control Method
CPU
Types of Control
Starting Cycle (1)
Inputs
Outputs
Normal
Digital
Relay
Normal 17 - 30A
Starting Duty Cycle Normal 45 - 200A
With optional ventilation kit 45-200A
Protections (Standard)
Safety
Protections (with Accessory)
Functions /
Resources
Standard
Command
Additional Functions/Resources
Programming
Accessory
(HMI or Serial
communication)
Supervision
Accessories and
Options
Finishing
Conformities /
Standards
2.16
Options
Color
Safety
Low voltage
EMC
UL (USA) / cUL (Canada)
CE (Europe)
C-Tick (Australia)
220 to 575 Vac
110 to 240 Vac (-15% to +10%), or 94 to 264 Vac
50 to 60 Hz (+/- 10%), or 45 to 66 Hz
IP20 in models from 17 to 85 A
IP00 in models from 130 to 200 A (IP20 as option)
Motor Voltage Variation
DSP type microprocessor (Digital Signal Processor)
Voltage ramp
Current limit
300% (3 x Inom.) during 30 s, 10 starts per hour ( every 6 minutes)
3 isolated programmable inputs
2 relays with NO contacts, 240Vac, 1A, programmable functions
300%
3 starts
10 starts
Overcurrent
Locked rotor
Overcurrent before By-pass
Excess starting time
Phase loss
Frequency outside tolerance
Inverted phase sequence
By-pass contact open
Overtemperature in power heatsink
Undervoltage in control supply
Motor overload (class 5 to 30)
Undercurrent
Programming error
Current imbalance
Serial communication error
Undercurrent before by-pass
HMI communication error
External fault
Overtemperature in motor PTC
Voltage ramp (Initial voltage: 30% to 90%)
Current limitation (150% to 450% of SSW-07 rated current)
Starting time (1 to 40s)
Kick Start (Off - 0.2 to 2s)
Deceleration ramp ( 0 to 40s)
Motor and SSW-07 current relation (50% to 100%)
Faults automatic-reset
Thermal memory automatic-reset
Factory standard reset
Soft-starter built-in By-pass
On, Off / Reset and Parameterization (function programming)
Starting time up to 999s
Deceleration time up to 999s
Program enabling password
Selection for Local / Remote operation
COPY function (SSW-07 >>> HMI and HMI >>> SSW-07)
Programmable rated voltage
Motor current (%Soft-Starter In)
Motor current (%motor In)
Motor current (A)
Current indication in each phase R-S-T
Supply network frequency
Apparent power supplied to load (kVA)
Soft-Starter status
Digital input and output status
Last 4 faults
Soft-Starter Software Version
Heatsink temperature
Motor thermal protection status
Plug-in type local HMI
HMI remote Kit
5 and 10m cable for remote HMI interconnection
RS-232 communication kit
SSW-07 interconnection leads >>> PC Serial (RS-232) 3 and 10m
RS-485 communication kit
Motor PTC kit
Ventilation kit for size 2 (45 to 85 A)
Ventilation kit for size 3 (130 to 200 A)
IP20 kit for size 3 (130 to 200 A)
Lid: Ultra mat gray
Cabinet: Ultra mat blue
UL 508 Standard- Industrial Control Equipment
EN60947-4-2; LVD 2006/95/EC Standard – Low voltage Directive
EMC 89/336/EEC Directive – Industrial Environment
Underwriters Laboratories Inc. – USA
Conformity test conducted by EPCOS
Australian Communication Authority
Soft Starters
101
www.pamensky.com
EDP - Enclosed Drive Panel
The Enclosed Drive Panel is an industrial general purpose AC motor control and protection
package. It is designed for simple and quick installation and start-up, requiring only input
power and output motor connections.
The Enclosed Drive Panel is built to complement the ruggedness and reliability of WEG
electric motors, providing a complete, simple, and cost effective AC motor control, monitor
and protection solution.
Standard Features
Optional Features
•
•
•
•
•
•
•
•
•
•
V/Hz and Sensorless Vector Control
230V, 460V or 575V Input Voltage
2 Isolated Analog Inputs
6 Programmable Digital Inputs
3 Programmable Relay Outputs
2 Analog Outputs
150% Overload 1min
Line Reactor
Load Reactor
Panel Control Option
• Start/Stop Pushbuttons
• Run/Stop/Fault Pilot Lights
• Local/Remote Selector Switch
Applications
Standard Panel Includes
•
•
•
•
•
•
Variable Frequency Drive CFW09
Keypad Mounted to Panel Door
Through Door Disconnect
Control Power Transformer
NEMA 12 Ventilated Enclosure
Canadian Certification
•
•
•
•
•
•
•
Pumps
Fans
Blowers
Conveyors
Rollout tables
Agitators
Mixers
Wall Mounted
230V: 30 - 50HP: 86 - 130A
460V: 30 - 75HP: 45 - 105A
575V: 30HP: 32A
Free Standing
230V: 60 - 75HP: 180 - 240A
460V: 100 - 500HP: 142 - 600A
575V: 40 - 500HP: 44 - 472A
Panels
3.1
www.pamensky.com
101
EDP - Table of Products
230V
Standard Product
Current (A)
Optional Features
HP*
Panel Control
Part Number
List Price
Dimensions
Line Reactor
Load Reactor
CT
VT
CT
VT
Part Number
List Price
Part Number
List Price
Part Number
86
105
30
40
EDP09.86/230
$18,129
60 x 36 x 16
EDP-PNLCTRL
$681
EDP-KDRF24LI
$741
EDP-KDRF24LO
List Price
$741
105
130
40
50
EDP09105/230
$22,048
72 x 36 x 16
EDP-PNLCTRL
$681
EDP-KDRF25LI
$1,036
EDP-KDRF25LO
$1,036
130
150
50
50
EDP09130/230
$23,032
72 x 36 x 16
EDP-PNLCTRL
$681
EDP-KDRF26LI
$1,194
EDP-KDRF26LO
$1,194
142
174
50
60
EDP09142/230
$25,300
72 x 36 x 18
EDP-PNLCTRL
$681
EDP-KDRF26LI
$1,212
EDP-KDRF26LO
$1,212
180
60
EDP09180/230
$30,104
72 x 36 x 18
EDP-PNLCTRL
$681
EDP-KDRI22LI
$1,390
EDP-KDRI22LO
$1,390
240
75
EDP09240/230
$36,985
72 x 36 x 18
EDP-PNLCTRL
$681
EDP-KDRI23LI
$1,415
EDP-KDRI23LO
$1,415
460V
Standard Product
Current (A)
Optional Features
HP*
Panel Control
Part Number
List Price
CT
VT
CT
VT
45
54
30
40
EDP09.45/460
$14,204
60
70
40
50
EDP09.60/460
$15,959
70
86
50
60
EDP09.70/460
86
105
60
75
105
130
75
100
174
100
142
125
Line Reactor
Load Reactor
Dimensions
Part Number
List Price
Part Number
List Price
Part Number
List Price
48 x 36 x 16
EDP-PNLCTRL
60 x 36 x 16
EDP-PNLCTRL
$681
EDP-KDRD2LI
$681
EDP-KDRC1LI
$644
EDP-KDRD2LO
$644
$697
EDP-KDRC1LO
$16,605
60 x 36 x 16
EDP-PNLCTRL
$681
$697
EDP-KDRF2LI
$792
EDP-KDRF2LO
EDP09.86/460
$19,785
72 x 36 x 16
EDP-PNLCTRL
$792
$681
EDP-KDRF4LI
$810
EDP-KDRF4LO
EDP09105/460
$22,499
72 x 36 x 16
EDP-PNLCTRL
$810
$681
EDP-KDRF3LI
$1,058
EDP-KDRF3LO
$1,058
EDP09142/460
$25,270
72 x 36 x 18
EDP-PNLCTRL
$681
EDP-KDRH3LI
$1,201
EDP-KDRH3LO
$1,201
180
150
EDP09180/460
$32,953
72 x 36 x 18
EDP-PNLCTRL
$681
EDP-KDRH1LI
$1,673
EDP-KDRH1LO
$1,673
211
150
EDP09211/460
$36,339
72 x 36 x 18
EDP-PNLCTRL
$681
EDP-KDRG3LI
$2,084
EDP-KDRG3LO
$2,084
240
200
EDP09240/460
$37,187
72 x 36 x 18
EDP-PNLCTRL
$681
EDP-KDRG3LI
$2,084
EDP-KDRG3LO
$2,084
312
250
EDP09312/460
$50,888
72 x 72 x 24
EDP-PNLCTRL
$681
EDP-KDRG1LI
$2,280
EDP-KDRG1LO
$2,280
361
300
EDP09361/460
$52,144
72 x 72 x 24
EDP-PNLCTRL
$681
EDP-KDRG2LI
$2,328
EDP-KDRG2LO
$2,328
450
350
EDP09450/460
$64,021
72 x 72 x 24
EDP-PNLCTRL
$681
EDP-KDRJ2LI
$2,673
EDP-KDRJ2LO
$2,673
515
400
EDP09515/460
$73,451
72 x 72 x 24
EDP-PNLCTRL
$681
EDP-KDRJ1LI
$2,935
EDP-KDRJ1LO
$2,935
600
500
EDP09600/460
$83,399
72 x 72 x 24
EDP-PNLCTRL
$681
EDP-KDRL2LI
$5,055
EDP-KDRL2LO
$5,055
575V
Standard Product
Current (A)
Optional Features
HP*
Panel Control
Part Number
List Price
CT
VT
CT
VT
32
32
30
30
EDP09.32/575
$13,790
44
53
40
50
EDP09.44/575
$17,278
53
63
50
60
EDP09.53/575
63
79
60
75
79
99
75
107
147
147
211
Line Reactor
Load Reactor
Dimensions
Part Number
List Price
Part Number
List Price
Part Number
List Price
48 x 36 x 16
EDP-PNLCTRL
72 x 36 x 18
EDP-PNLCTRL
$681
EDP-KDRD42LI
$681
EDP-KDRC43LI
$535
EDP-KDRD42LO
$535
$570
EDP-KDRC43LO
$19,023
72 x 36 x 18
EDP-PNLCTRL
$681
$570
EDP-KDRC44LI
$605
EDP-KDRC44LO
EDP09.63/575
$20,753
72 x 36 x 18
EDP-PNLCTRL
$605
$681
EDP-KDRF46LI
$761
EDP-KDRF46LO
100
EDP09.79/575
$23,280
72 x 36 x 18
$761
EDP-PNLCTRL
$681
EDP-KDRF47LI
$786
EDP-KDRF47LO
100
150
EDP09107/575
$35,071
$786
72 x 72 x 18
EDP-PNLCTRL
$681
EDP-KDRF47LI
$1,058
EDP-KDRF47LO
$1,058
196
150
211
200
200
EDP09147/575
200
EDP09211/575
$42,721
72 x 72 x 18
EDP-PNLCTRL
$681
EDP-KDRH44LI
$1,433
EDP-KDRH44LO
$1,433
$48,646
72 x 72 x 18
EDP-PNLCTRL
$681
EDP-KDRI42LI
$1,517
EDP-KDRI42LO
247
315
250
300
$1,517
EDP09247/575
$63,850
90 x 72 x 36
EDP-PNLCTRL
$681
EDP-KDRG47LI
$1,675
EDP-KDRG47LO
315
343
300
$1,675
350
EDP09315/575
$68,011
90 x 72 x 36
EDP-PNLCTRL
$681
EDP-KDRG45LI
$1,938
EDP-KDRG45LO
343
418
$1,938
350
400
EDP09343/575
$84,040
90 x 72 x 36
EDP-PNLCTRL
$681
EDP-KDRJ45LI
$2,150
EDP-KDRJ45LO
418
$2,150
472
400
500
EDP09418/575
$89,672
90 x 72 x 36
EDP-PNLCTRL
$681
EDP-KDRJ43LI
$2,254
EDP-KDRJ43LO
472
$2,254
555
500
600
EDP09472/575
$98,022
90 x 72 x 36
EDP-PNLCTRL
$681
EDP-KDRL45LI
$2,675
EDP-KDRL45LO
$2,675
* Please note that HP reference is for 4 pole motors (1800 RPM). To size the drive correctly please confirm the Current (A).
Sizing table is used for approximation only, final sizing subject to review of application/load details.
Standard Panel includes drive, fuse disconnect, control transformer, door mounted keypad and filtered fan mounted in a NEMA 12 ventilated enclosure.
Panel Control Option Includes Start/Stop Pushbuttons, Run/Stop/Fault Pilot Lights and Local/Remote Selector Switch.
3.2
Panels
101
www.pamensky.com
EDP - Sample Wiring Diagram
This wiring diagram is reprinted for illustrative purposes only and may be subject to change.
Panels
3.3
www.pamensky.com
101
GPH - Combination Soft Starter
The GPH Series of WEG Combination Soft Starters is an industrial general purpose
AC motor Soft Starter package designed for simple and quick installation and
start-up, requiring only input power and output motor connections. The NEMA
4/12 enclosure is ideal for dusty or wet environments. The GPH starters are built
to complement the ruggedness and reliability of WEG motors, providing a complete
and cost effective AC motor starting and protection solution.
Standard Features
Applications
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rated 500%
5 - 250HP at 230V, 10 -500HP at 460V
and 15 - 500HP at 575V
NEMA 4/12 wall mount enclosure suitable
for dusty, wet, or outdoor applications
Circuit breaker with door mounted
operator provides built-in short circuit
protection and input power disconnect
Automatic run rated bypass contactor
Fused Control Power Transformer (CPT)
Start and Stop Pushbuttons and Run and
Fault Pilot Lights on the front cover
Keypad with protective cover mounted on
enclosure door, all parameter changes are
through the cover-mounted keypad. Dust
and water stay out of the enclosure.
Monitoring of current, voltage, kVA and
kW can be done from the outside
Standard Panel Includes
•
•
•
•
3.4
Soft Starter SSW 07
Through Door Disconnect
Control Power Transformer
NEMA 4/12 Enclosure
Panels
Pumps
Fans
Blowers
Compressors
Conveyors
Mixers
Crushers
Saws
101
www.pamensky.com
GPH - Table of Products
230V
HP
Current (A)
Part Number
List Price
Dimensions
5
17
GPH070017230
7.5
24
GPH070024230
10
30
GPH070030230
15
45
GPH070045230
20
61
GPH070061230
30
85
GPH070085230
50
130
GPH070130230
60
171
GPH070171230
75
200
GPH070200230
100
255
GPH070255230
125
312
GPH070312230
150
365
GPH070365230
150
412
GPH070412230
$5,084
$5,445
$5,478
$5,440
$6,897
$7,182
$9,584
$11,511
$11,997
$13,356
$13,680
$13,841
$17,210
24x24x12
24x24x12
24x24x12
24x24x12
24x24x12
24x24x12
42x30x12
42x30x12
42x30x12
60x36x16
60x36x16
60x36x16
60x36x16
460V
HP
Current (A)
Part Number
List Price
Dimensions
10
17
GPH070017460
15
24
GPH070024460
20
30
GPH070030460
30
45
GPH070045460
40
61
GPH070061460
60
85
GPH070085460
100
130
GPH070130460
125
171
GPH070171460
150
200
GPH070200460
200
255
GPH070255460
250
312
GPH070312460
300
365
GPH070365460
350
412
GPH070412460
$5,084
$5,445
$5,478
$5,440
$6,897
$7,182
$9,584
$11,511
$11,997
$13,356
$13,680
$13,841
$17,210
24x24x12
24x24x12
24x24x12
24x24x12
24x24x12
24x24x12
42x30x12
42x30x12
42x30x12
60x36x16
60x36x16
60x36x16
60x36x16
575V
HP
Current (A)
Part Number
List Price
Dimensions
15
17
GPH070017575
20
24
GPH070024575
25
30
GPH070030575
40
45
GPH070045575
50
61
GPH070061575
75
85
GPH070085575
125
130
GPH070130575
150
171
GPH070171575
200
200
GPH070200575
250
255
GPH070255575
300
312
GPH070312575
350
365
GPH070365575
400
412
GPH070412575
$5,084
$5,445
$5,478
$5,440
$6,897
$7,182
$9,584
$11,511
$11,997
$13,356
$13,680
$13,841
$17,210
24x24x12
24x24x12
24x24x12
24x24x12
24x24x12
24x24x12
42x30x12
42x30x12
42x30x12
60x36x16
60x36x16
60x36x16
60x36x16
Panels
3.5
www.pamensky.com
101
GPH - Sample Wiring Diagram
Fused
Disconnect
Motor
R
U
S
T
V
W
Door
Mounted
Keypad
Fuse
Fuse
Fuse
Control
Transformer
120V
Secondary
A1
Start
DI1
Stop
DI2
DI3
Run
13
Fault
24
14/23
A2
3.6
Panels
102
www.pamensky.com
PESW - Enclosed Motor Starter
WEG offers non-reversing and non-combination NEMA-4X magnetic starter up to 75HP at
460V.
Featuring components that meet IEC design standards and UL horsepower ratings, including
WEG contactors and overload relays, the PESW magnetic starters are ideal to help protect
motors and ensure smooth operation year-after-year. Assembled together in a NEMA 4X
enclosure with two options.
WEG PESW starters are recommended for all single and three phase applications where
across-the-line starters can be applied.
Standard Features
•
•
•
•
•
•
•
•
•
High horsepower ratings in four compact
sizes
Bimetallic Overload Relays
Adjustable trip current
Direct heated bimetallic elements – class
10
Ambient temperature compensated
Phase-loss sensitivity protection
Selectable Manual or Automatic RESET
Electrically isolated NO-NC auxiliary
contacts
NEMA 4X polymeric enclosure with
knockouts
Industrial Control Products
Start/Stop contacts independent
from main contactor and from
thermal overload relay
Ground and Neutral (supplied as
standard)
Thermal overload relay reset
integrated to the stop button up to
25-30HP - 460V, 25HP - 575V
4.1
www.pamensky.com
102
PESW - Part Number Specification
PESW
S
1
2
-
105
V24
A
X
3
4
5
6
1.
PESW Enclosed Starter, Non-Combination, Non-Reversing
2.
Number of Phases:
3.
CWM (Contactor)
Type:
4.
RM38
7
S = Single Phase
Blank = Three Phase
Control Voltage:
Code
Contactor Part Number
Description
9
CWM9 - 10 - 30
Contactor 9 A, 1NO
12
CWM12 - 10 - 30
Contactor 12 A, 1NO
18
CWM18 - 10 - 30
Contactor 18 A, 1NO
25
CWM25 - 11 - 30
Contactor 25 A, 1NO/1NC
32
CWM32 - 11 - 30
Contactor 32 A, 1NO/1NC
40
CWM40 - 11 - 30
Contactor 40 A, 1NO/1NC
50
CWM50 - 11 - 30V
Contactor 50 A, 1NO/1NC
65
CWM65 - 11 - 30
Contactor 65 A, 1NO/1NC
80
CWM80 - 11 - 30
Contactor 80 A, 1NO/1NC
95
CWM95 - 11 - 30
Contactor 95 A, 1NO/1NC
105
CWM105 - 11 - 30
Contactor 105 A, 1NO/1NC
Code
Coil Voltage
Coil Part Number
Description
V18
120 V
BCA4 - 25V-18
AC coil contactor 9 -25 A
V24
208-240 V
BCA4 - 25V-24
AC coil contactor 9 -25 A
V47
480 V
BCA4 - 25V-47
AC coil contactor 9 -25 A
V56
575 V
BCA4 - 25V-56
AC coil contactor 9 -25 A
V18
120 V
BCA4 - 40V-18
AC coil contactor 32 - 40 A
V24
208-240 V
BCA4 - 40V-24
AC coil contactor 32 - 40 A
V47
480 V
BCA4 - 40V-47
AC coil contactor 32 - 40 A
V56
575 V
BCA4 - 40V-56
AC coil contactor 32 - 40 A
V18
120 V
BCA - 105V-18
AC coil contactor 50 - 105 A
V24
208-240 V
BCA - 105V-24
AC coil contactor 50 - 105 A
V47
480 V
BCA - 105V-47
AC coil contactor 50 - 105 A
V56
575 V
BCA - 105V-56
AC coil contactor 50 - 105 A
5.
Pilot Device:
A = Start & Stop/Reset Pushbutton
E = Reset Pushbutton
6.
Enclosure Type:
X = NEMA 4X
7.
Overload Ampere
Range:
4.2
-
Single Phase Class 10
Three Phase Class 10
Code
Part Number
Description
Code
Part Number
Description
Code
RM26
RW27-1D2-U004
2.8 - 4A
R23
RW27-1D3-D012
0.8 - 1.2A
R36
RW67-2D3-U040
Part Number
Description
25 - 40A
RM27
RW27-1D2-D063
4 - 6.3A
R24
RW27-1D3-D018
1.2 - 1.8A
R37
RW67-1D3-U050
32 - 50A
32 - 50A
RM28
RW27-1D2-U008
5.6 - 8A
R25
RW27-1D3-D028
1.8 - 2.8A
R38
RW67-2D3-U050
RM29
RW27-1D2-U010
7 - 10A
R26
RW27-1D3-U004
2.8 - 4.0A
R39
RW67-2D3-U057
40 - 57A
RM30
RW27-1D2-D125
8 - 12.5A
R27
RW27-1D3-D063
4.0 - 6.3A
R40
RW67-2D3-U063
50 - 63A
RM31
RW27-1D2-U015
10 - 15A
R28
RW27-1D3-U008
5.6 - 8.0A
R41
RW67-2D3-U070
57 - 70A
RM32
RW27-1D2-U017
11 - 17A
R29
RW27-1D3-U010
7.0 - 10A
R42
RW67-2D3-U080
63 - 80A
63 - 80A
RM33
RW27-1D2-U023
15 - 23A
R30
RW27-1D3-D125
8.0 - 12.5A
R43
RW117-1D3-U080
RM34
RW27-1D2-U032
22 - 32A
R31
RW27-1D3-U015
10 - 15A
R44
RW117-1D3-U097
75 - 97A
RM35
RW67-1D2-U040
25 - 40A
R32
RW27-1D3-U017
11 - 17A
R45
RW117-1D3-U112
90 - 112A
RM36
RW67-2D2-U040
25 - 40A
R33
RW27-1D3-U023
15 - 23A
RM37
RW67-1D2-U050
32 - 50A
R34
RW27-1D3-U032
22 - 32A
RM38
RW67-2D2-U050
32 - 50A
R35
RW67-1D3-U040
25 - 40A
Industrial Control Products
102
www.pamensky.com
PESW - Table of Products
115V - Single Phase
Electrical Data
Mechanical Data
Purchasing Data
Overload
Range
(A)
Max.
Motor
(HP)
Coil
Voltage
Frame
Degree of
Protection
Dimensions
H x W xD (in)
WEG Part Number
List Price
7 - 10
10 - 15
11 - 17
15 - 23
25 - 40
25 - 40
40 - 57
0.5
0.75
1
2
3
3
5
120 V
120 V
120 V
120 V
120 V
120 V
120 V
04
04
04
04
06
08
08
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
8.3 x 4.7 x 5.0
11.0 x 7.1 x 5.6
11.0 x 7.1 x 5.6
PESWS-9V18AX-RM29
PESWS-12V18AX-RM31
PESWS-18V18AX-RM32
PESWS-25V18AX-RM33
PESWS-40V18AX-RM35
PESWS-50V18AX-RM36
PESWS-50V18AX-RM39
$123
135
141
148
289
504
539
208-230V - Single Phase
Electrical Data
Mechanical Data
Purchasing Data
Overload
Range
(A)
Max.
Motor
(HP)
Coil
Voltage
Frame
Degree of
Protection
Dimensions
H x W xD (in)
WEG Part Number
List Price
5.6 - 8
8 - 12.5
10 - 15
11 - 17
15 - 23
25 - 40
32 - 50
1
1.5
2
3
5
7.5
10
230 V
230 V
230 V
230 V
230 V
230 V
230 V
04
04
04
04
04
08
08
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
11.0 x 7.1 x 5.6
11.0 x 7.1 x 5.6
PESWS-9V24AX-RM28
PESWS-9V24AX-RM30
PESWS-12V24AX-RM31
PESWS-18V24AX-RM32
PESWS-25V24AX-RM33
PESWS-50V24AX-RM36
PESWS-65V24AX-RM38
$123
123
135
141
148
504
539
208-230V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Overload
Range
(A)
Max.
Motor
(HP)
Coil
Voltage
Frame
Degree of
Protection
Dimensions
H x W xD (in)
WEG Part Number
List Price
1.8 - 2.8
2.8 - 4
4 - 6.3
5.6 - 8
7 - 10
11 - 17
15 - 23
15 - 23
22 - 32
25 - 40
25 - 40
32 - 50
40 - 57
57 - 70
63 - 80
90 - 112
0.75
1
1.5
2
3
5
7.5
7.5
10
15
15
15
20
25
30
40
230 V
230 V
230 V
230 V
230 V
230 V
230 V
230 V
230 V
230 V
230 V
230 V
230 V
230 V
230 V
230 V
04
04
04
04
04
04
04
06
06
06
08
08
08
08
10
10
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
8.3 x 4.7 x 5.0
8.3 x 4.7 x 5.0
8.3 x 4.7 x 5.0
11.0 x 7.1 x 5.6
11.0 x 7.1 x 5.6
11.0 x 7.1 x 5.6
11.0 x 7.1 x 5.6
14.2 x 9.9 x 6.6
14.2 x 9.9 x 6.6
PESW-9V24AX-R25
PESW-9V24AX-R26
PESW-9V24AX-R27
PESW-9V24AX-R28
PESW-9V24AX-R29
PESW-18V24AX-R32
PESW-25V24AX-R33
PESW-32V24AX-R33
PESW-32V24AX-R34
PESW-40V24AX-R35
PESW-50V24AX-R36
PESW-50V24AX-R38
PESW-65V24AX-R39
PESW-80V24AX-R41
PESW-95V24AX-R43
PESW-105V24AX-R45
$139
139
139
139
139
161
169
226
226
340
622
622
637
691
836
871
Industrial Control Products
4.3
www.pamensky.com
102
PESW - Table of Products
460V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Overload
Range
(A)
Max.
Motor
(HP)
Coil
Voltage
Frame
Degree of
Protection
Dimensions
H x W xD (in)
WEG Part Number
List Price
1.2 - 1.8
1.8 - 2.8
2.8 - 4
4 - 6.3
5.6 - 8
8 - 12.5
11 - 17
15 - 23
15 - 23
22 - 32
25 - 40
32 - 50
40 - 57
57 - 70
63 - 80
75 - 97
1
1.5
2
3
5
7.5
10
15
15
20
25
30
40
50
60
75
460V
460V
460V
460V
460V
460V
460V
460V
460V
460V
460V
460V
460V
460V
460V
460V
04
04
04
04
04
04
04
04
06
06
06
08
08
08
10
10
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
8.3 x 4.7 x 5.0
8.3 x 4.7 x 5.0
8.3 x 4.7 x 5.0
11.0 x 7.1 x 5.6
11.0 x 7.1 x 5.6
11.0 x 7.1 x 5.6
14.2 x 9.9 x 6.6
14.2 x 9.9 x 6.6
PESW-9V47AX-R24
PESW-9V47AX-R25
PESW-9V47AX-R26
PESW-9V47AX-R27
PESW-9V47AX-R28
PESW-12V47AX-R30
PESW-18V47AX-R32
PESW-25V47AX-R33
PESW-32V47AX-R33
PESW-32V47AX-R34
PESW-40V47AX-R35
PESW-50V47AX-R38
PESW-65V47AX-R39
PESW-80V47AX-R41
PESW-95V47AX-R43
PESW-105V47AX-R44
$139
139
139
139
139
145
161
169
226
226
340
622
637
691
836
871
575V - Three Phase
Electrical Data
Mechanical Data
Purchasing Data
Overload
Range
(A)
Max.
Motor
(HP)
Coil
Voltage
Frame
Degree of
Protection
Dimensions
H x W xD (in)
WEG Part Number
List Price
1.2 - 1.8
1.8 - 2.8
2.8 - 4
4 - 6.3
7 - 10
8 - 12.5
11 - 17
15 - 23
22 - 32
25 - 40
32 - 50
40 - 57
57 - 70
63 - 80
1
1.5
3
5
7.5
10
15
20
25
30
40
50
60
75
575V
575V
575V
575V
575V
575V
575V
575V
575V
575V
575V
575V
575V
575V
04
04
04
04
04
04
04
06
06
08
08
08
08
10
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
NEMA 4X
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
7.3 x 4.1 x 4.4
8.3 x 4.7 x 5.0
8.3 x 4.7 x 5.0
11.0 x 7.1 x 5.6
11.0 x 7.1 x 5.6
11.0 x 7.1 x 5.6
11.0 x 7.1 x 5.6
14.2 x 9.9 x 6.6
PESW-9V56AX-R24
PESW-9V56AX-R25
PESW-9V56AX-R26
PESW-9V56AX-R27
PESW-9V56AX-R29
PESW-12V56AX-R30
PESW-18V56AX-R32
PESW-32V56AX-R33
PESW-32V56AX-R34
PESW-50V56AX-R36
PESW-50V56AX-R38
PESW-65V56AX-R39
PESW-80V56AX-R41
PESW-95V56AX-R43
$139
139
139
139
139
145
161
226
226
622
622
637
691
836
4.4
Industrial Control Products
102
www.pamensky.com
PESW - Wiring Diagrams
Three phase D.O.L. Starter
-
-
-
-
-
/
-
*
-
,
*
%
,
,
%
,
'5
'5
'5
'5
6
7
8
6
"
,
8
"
,
"
.
_
7
.
_
Figure 1
"
Figure 2
Control circuit with phase to phase coil supply
Control circuit with separate coil supply
When using 230V, 400V, 500V, and 690V on the
Part Number, WEG D.O.L. starters (DLW) will
be factory-connected, as per wiring diagrams of figure 1, that is, with phase to
phase coil suplly.
For the voltages with phase to phase coil supply, contact WEG.
When using 24V, 48V, 110V, etc. on the
Part Number, WEG D.O.L. starters (DLW) will be factory-connected, as per
wiring diagrams of figure 2, that is, with control circuit to be connected
through a separate coil supply.
Single-phase D.O.L Starter
-
Pilot Devices
-
*
,
%
,
'5
'5
6
6
"
,
"
.
_
Note: When using remote control, disconnect the circuit at the points marked with the “x” in figures 1 and 2 and connect the external devices (Thermostat, pushbutton, etc),
as indicated with dotted lines.
Industrial Control Products
4.5
www.pamensky.com
102
PESW - Dimensions
Provision for cable gland fitting
Frame
øA
B
C
D
E
Top
Bottom
Back
Size 04
0.2
7.1
4.4
4.1
7.3
2 x 1/2”
2 x 1/2”
ø0.7
Size 06
0.3
8.1
5.0
4.7
8.3
2 x 1/2” and 3/4”
2 x 1/2” and 3/4”
ø0.9
Size 08
0.2
10.8
5.6
7.1
11.0
2 x 3/4” and 1”
2 x 3/4” and 1”
N/A *
Size 10
0.3
14.0
6.6
9.9
14.2
1 x 1” and 1 1/4”
1 x 1” and 1 1/4”
N/A *
Dimensions in inches.
* For wall mounting on starters size 08 and 10, four screws with the following characteristics should be used:
•
Pan, dome or rounded shaped head;
•
Starter size 08:
•
Screws size 1/4 (or M6 – ISO Standard);
•
Dimensions: diameter thread shall be maximum 1/4 in. and diameter head shall be maximum 15/64 in.
•
Starter size 10:
•
Screws size 12 (or M5 – ISO Standard);
•
Dimensions: diameter thread shall be maximum 0.236 in. and diameter head shall be maximum 0.394 in.
4.6
Industrial Control Products
102
www.pamensky.com
Other Starter Options
ESW Series NEMA 1 Non-Combination Starters
•
•
•
•
•
High horsepower ratings in three compact sizes
NEMA type 1 metallic lift-off enclosure with
knockouts
Bimetallic ambient compensated overload relays
Easy addition of pilot devices for field modification
Manual RESET plunger is provided as standard
feature on all models
Customized Starter Solution
V.J. Pamensky Canada Inc. has a Toronto based panel
shop to design and build custom solutions for motor
control applications. Customized NEMA 4 starters
with Emergency Stop, Start-Stop and control options
can be built quickly and to fit the demands of different
applications.
Explosion Proof Manual Motor Starters
•
•
•
•
•
•
Suitable for Hazardous Areas: Class I, Groups C &
D - Class II, Groups E, F, G
Motor Control
Circuit Disconnect
Short Circuit Protection up to 10 kA @ 600 VAC
Thermal Overload Protection Class 10
Control Devices: Start & Stop / Reset
Industrial Control Products
4.7
www.pamensky.com
102
CWC Miniature Contactors
The CWC Series miniature contactor features more horsepower for its size than any other
miniature contactor on the market. The CWC’s compact dimensions for its current rating, up
to 25A, AC-3 utilization category, allows it to take up less space inside electrical enclosures
while still running motors up to 10HP @ 575V. The dimensions remain the same whether the
coil voltage is AC or DC making panel design and assembly easier. DC models feature low
consumption coils allowing the CWC to be operated directly from a PLC without interface
relays.
The following configurations are available “off-the-shelf.”
•
•
•
•
3 Pole Normally Open Power Contacts
with one built-in Auxiliary Contact (Can be
Normally Open or Normally Closed)
3 Pole Normally Open Reversing Contactors rated AC-4 Utilization Category
4 Pole Power Contacts (four Normally Open, or two Normally Open and two Normally
Closed)
Control Relay
An extensive lineup of modular and tool-free accessories makes the CWC Series the most
flexible and easy-to-use miniature contactor available today.
Features
•
•
•
•
•
•
4.8
Rated up to 10 HP @ 575V
Direct mounting to the WEG RW17D
overload relay and MPW25 manual motor
protector with ECCMP-C0 accessory
Frame size remains the same for AC and
DC coil contactors
Heavy-duty operation
Tool-free DIN rail mounting
Complete line of snap-on accessories
Industrial Control Products
102
www.pamensky.com
CWC - Part Number Specification
CWC
16
1
2
-
1.
CWC Miniature Contactor
2.
Frame Rating:
Blank: Control Relay (Ith = 10Amps)
07: 7Amps
09: 9Amps
12: 12Amps
16: 16Amps
25: 25Amps
3.
Auxiliary Contacts:
00: None
10: 1 NO
01: 1 NC
4.
Power Pole:
00: Control Relay (4 auxiliary terminals)
30: CWC0 with 3 NO Power Poles
22: CWC0 with 2 NO + 2 NC Power Poles
40: CWC0 with 4 NO Power Poles
5.
Coil Voltage:
VAC Coil
10
30
V18
3
4
5
VDC Coil (Standard Consumption)
VDC Coil (Low Consumption)
Description
Code
Description
Code
Description
Code
24Vac 60Hz
V04
24Vdc
C03
24Vdc
L03
120Vac 60Hz
V18
110Vdc
C12
208-240Vac 60Hz
V24
480Vac 60Hz
V47
600Vac 60Hz
V56
Industrial Control Products
4.9
www.pamensky.com
102
CWC Miniature Contactors - Table of Products
Three Pole Miniature Contactors with AC Coil
Electrical Data
Mechanical Data
Purchasing Data
Maximum Applicable Motor (HP)
Auxiliary Contacts
Current
(A)
Single Phase
7
7
9
9
12
12
16
16
25
Three Phase
115V
230V
200V
230V
460V
575V
NO
NC
1/3
1/3
1/3
1/3
1/2
1/2
1
1
1 1/2
3/4
3/4
1
1
2
2
2
2
3
1 1/2
1 1/2
2
2
3
3
3
3
5
1 1/2
1 1/2
3
3
3
3
5
5
7 1/2
5
5
5
5
7 1/2
7 1/2
10
10
15
5
5
7 1/2
7 1/2
7 1/2
7 1/2
10
10
15
1
0
1
0
1
0
1
0
0
0
1
0
1
0
1
0
1
0
Weight
(lb)
Part Number
List Price
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.43
0.44
CWC07-10-30*
CWC07-01-30*
CWC09-10-30*
CWC09-01-30*
CWC12-10-30*
CWC12-01-30*
CWC16-10-30*
CWC16-01-30*
CWC25-00-30*
$29
29
31
31
32
32
33
33
42
Replace ‘X’ with code for AC Coil Voltage Code Selection
60 Hz
120V
208-240V
CODE
V18
V24
50 Hz
110V
-
Miniature Control Relay with AC Coils
Electrical Data
Purchasing Data
Auxiliary Contacts
Current
(A)
Rating
10
10
10
10
10
A600, Q600
A600, Q600
A600, Q600
A600, Q600
A600, Q600
N.O.
N.C.
2
3
1
4
0
2
1
3
0
4
Replace ‘X’ with code for AC Coil Voltage Code Selection
60 Hz
120V
208-240V
480V
600V
CODE
V18
V24
V47
V56
50 Hz
110V
-
400-415V
-
4.10
Industrial Control Products
Part Number
List Price
CAW04R422X
CAW04R431X
CAW04R413X
CAW04R440X
CAW04R404X
$30
30
30
30
30
102
www.pamensky.com
CWC Miniature Contactors - Technical Data
Part number
CWC07
CWC09
Standards
CWC012
CWC016
CWC025
CWCA0
IEC/EN 60 947. DIN VDE 0660. UL. CSA
Rated insulation voltage Ui
IEC/EN 60 947. DIN VDE 0660
690 V
600 V
UL. CSA
Rated impuse withstand voltage Uimp
4kV
Rated operational frequency
25 - 400 Hz
Degree of protection
Main circuits
IP20
IP20
Control circuits and auxiliary contacts
Ambient temperature
Operating temperature
Storage temperature
-25oC to +55oC
-55oC to +80oC
Altitude
Normal values
90 % Ie / 80 % Ue
80 % Ie / 75 % Ue
to 3000 m
3000 to 4000 m
4000 to 5000 m
Overvoltage category / Pollution degree
III / 3
Climatic proofing
IEC 60 680-2
Pole number of main circuits
3
4
Rated operational voltage Ue
690V
690 V
Conv. thermal current Ith
at < 55oC rated operational current Ie / AC-1
18 A
20 A
22 A
22 A
32 A
10 A
Rated operational current Ie AC-4 (Ue ≤ 440V)
2.8
3.5
4.5
5
9
-
1.5 / 2
3/4
3/4
3.7 / 5
3.7 / 5
3.7 / 5
2.2 / 3
4/5
4.5 / 6
4.5 / 6
4.5 / 6
5.5 / 7.5
3/4
5.5 / 7.5
5.5 / 7.5
5.5 / 7.5
5.5 / 7.5
7.5 / 10
4/5
7.5 / 10
7.5 / 10
7.5 / 10
7.5 / 10
7.5 / 10
5.5 / 7.5
11 / 15
11 / 15
11 / 15
11 / 15
11 / 15
-
2
4
20
20
25
25
35
10
AC-3 Utilization Category
Rated operational power
220/230 V
kW / hp
380 V
kW / hp
400/415 V
kW / hp
440 V
kW / hp
500 V
kW / hp
690 V
kW / hp
Maximum numbers of auxiliary contacts
Short circuit rating max. fuse gL-gG
Maximum electrical operations per hour
AC-1
AC-3
AC-4
no load
5
(A)
Ops/h
Ops/h
Ops/h
Ops/h
Mechanical lifespan
Ops x 106
Electrical lifespan (AC-3)
Ops x 106
2500
300
600
300
2500
3
10
1.4
1.3
10
1.2
1.1
0.6
-
Rated operational current Ie
AC-15
DC-13
220-230 V
A
-
-
-
-
-
10
380-400 V
A
-
-
-
-
-
6
415 V
A
-
-
-
-
-
5
500 V
A
-
-
-
-
-
4
24 V
A
-
-
-
-
-
6
48 V
A
-
-
-
-
-
4
110 V
A
-
-
-
-
-
2
220 V
A
-
-
-
-
-
0.7
Control circuit reliability
Ue min=17 V
Ie min= 5 mA
-
Terminal capacity
1 or 2 x (1...2.5)
1 or 2 x (0.5...2.5)
1 or 2 x (0.5...2.5)
1 or 2 x (2.5...6.0)
Tightening torque
N.m
1...1.5
Industrial Control Products
1.8
1...1.5
4.11
www.pamensky.com
102
Control circuit
CWC Miniature Contactors - Technical Data
Part number
CWC07
Pick-up
Coil consumption
CWC09
Sealing
Coils rated voltage
V
30
0.8
0.8
2...3
4.5...5.8
2...3
0.27
0.27
0.27
8...20 / 6...13
13...16 / 13.5...17
8...20 / 6...13
12-660VAC
12-660VAC / 12-440VDC
12-660VAC / 12-440VDC
Coil operational limits
Bifrequency coils
CWCA0
0.8
VA
Closing / Opening (AC) ms
CWC025
58
Cos j
Operation time
CWC016
30
Cos j
AC
CWC012
VA
0.85...1.1
Pick-up
xUs
0.5...0.8
Drop-out
xUs
0.2...0.6
Auxiliary contact block BFC
Terminal capacity
Number of conductors and Cross section
(min. and max.)
Flexible without cable lug (mm2)
2x (0.5...2.5)
Flexible without cable lug (mm2)
2x (0.75...1.5)
AWG Cables
(12...22)
Tightening torque Nm
08...1.5Nm
Conventional thermal current (lth)
A
Rated operational current (Ie) AC - 15
10
6/4(220/240V). 3/2(380/440V). 2(500V)
A
Rated operational current (Ie) DC - 13
1.5(24V). 0.5(60V). 0.2(220-240V)
Timing Relay
Rated insulation voltage (Ui )
V
300
24...240 VDC/VAC 50/60 Hz (TEC0)
24...60 VDC/VAC 50/60 Hz (TDC0)
Supply voltage (Ue )
1–2
terminals
100...240 VDC/VAC 50/60 Hz (TDC0)
220-240 VAC 50/60Hz (TETC0)
110-130 VAC 50/60Hz (TETC0)
24-28 VAC 50/60Hz (TETC0)
Control Voltage (Uc )
only TDC0 - pg 18
2 – B1
terminals
24...60 VDC/VAC 50/60 Hz (TDC0)
100...240 VDC/VAC 50/60 Hz (TDC0)
0.85...1.1 x Uc (VAC)
Voltage operational limits
0.8...1.25 x Uc (VDC)
4.12
Consumption
mA
≤5
Minimum time for Reset (Recovery time)
ms
650
Minimum control time (only TDC0)
ms
50
Setting accuracy (% of the full scale value)
%
+/-5
Repeat Accuracy
%
+/-1
Changeover time Y - Δ
ms
50
Industrial Control Products
102
www.pamensky.com
CWM Standard Contactors
The CWM general-purpose contactor line has been designed to take into consideration
industrial duty and reliability.
Rated for inductive loads up to 800A or 440kW @380/400V, WEG can offer the suitable
contactor for your application.
CWM contactors allow total panel space optimization, with only a few compact frame
sizes from 4 to 440kW @ 400/415V. Reducing inventory is a “snap” with CWM’s common
accessories. For example, side-mounted auxiliary contact blocks are the same from 9 to
300A (AC-3) @ 440V.
Designed for extended mechanical and electrical life, dependable switching in even the most
heavy-duty applications can be achieved. No matter how demanding the application, all
WEG contactors are tested and approved to be used under Type 1 and Type 2 short circuit
coordination. Ensuring global acceptance, all components conform to UL508 (USA and
Canada), IEC60947 and CE.
Features
•
•
•
•
•
•
•
•
•
•
General purpose motor applications
Fractional power through 600HP @ 460V
Compact frame sizes
Panel mountable or 35mm DIN rail up to
75HP @ 460V
Built-in auxiliary contacts up to 10HP @
460V
Front and side mountable auxiliary contact
blocks
IP20 Finger-touch protection
Wide coil voltage selection AC or DC
AC/DC coils with electronic modules
available from 100HP and up
Replaceable main contacts for entire line
Industrial Control Products
4.13
www.pamensky.com
102
CWM - Part Number Specification
CWM
18
1
2
-
1.
CWM Contactor
CWM: Contactor up to 300A
CWME: Contactor 400A and above
2.
Frame Rating:
9: 9Amps
12: 12Amps
18: 18Amps
25: 25Amps
32: 32Amps
40: 40Amps
50: 50Amps
65: 65Amps
80: 80Amps
95: 95Amps
3.
Auxiliary Contacts:
00: None
10: 1 NO
01: 1 NC
11: 1 NO + 1 NC
22: 2 NO + 2 NC
4.
Power Pole:
30: 3 NO Power Poles
20: 2 NO Power Poles
5.
Coil Voltage:
4.14
10
30
V18
3
4
5
105: 105Amps
112: 112Amps
150: 150Amps
180: 180Amps
250: 250Amps
300: 300Amps
400: 400Amps
600: 630Amps
800: 800Amps
VAC Coil (CWM9 to CWM105)
VDC Coil (CWM9 to CWM105)
VAC / VDC Coil (CWM112 to CWME800)
Description
Code
Description
Code
Description
Code
24Vac 60Hz
V04
24Vdc (CWM9…CWM25)
C03
24-28Vac/Vdc (CWM112…CWM300)
E02
E10
120Vac 60Hz
V18
24-28Vdc (CWM32…CWM105)
C34
110-130Vac/Vdc (CWM112…CWM300)
208-240Vac 60Hz
V24
110Vdc (CWM9…CWM25)
C12
208-250Vac/Vdc (CWM112…CWM300)
E13
480Vac 60Hz
V47
110-130Vdc (CWM32…CWM105)
C40
430-500Vac/Vdc (CWM112…CWM300)
E42
600Vac 60Hz
V56
100-127Vac/Vdc (CWME630…CWME800)
E35
100-240Vac/Vdc (CWME400)
E36
200-240Vac/Vdc (CWME630…CWME800)
E39
440-575Vac (CWME400…CWME800)
D82
Industrial Control Products
102
www.pamensky.com
CWM Standard Contactors - Table of Products
Three Pole Contactors with AC Coil
Electrical Data
Mechanical Data
Purchasing Data
Maximum Applicable Motor (HP)
Auxiliary Contacts
Current
(A)
Single Phase
9
9
12
12
18
18
25
25
32
32
40
40
50
50
65
65
80
80
95
95
105
105
150
180
250
300
400
630
800
Three Phase
115V
230V
200V
230V
460V
575V
NO
NC
1/2
1/2
3/4
3/4
1
1
2
2
3
3
3
3
3
3
5
5
7 1/2
7 1/2
7 1/2
7 1/2
10
10
-
1.5
1.5
2
2
3
3
5
5
5
5
7.5
7.5
10
10
10
10
15
15
15
15
20
20
-
3
3
3
3
5
5
7 1/2
7 1/2
10
10
10
10
15
15
20
20
20
20
25
25
30
30
50
60
75
100
125
150
200
3
3
3
3
5
5
7 1/2
7 1/2
10
10
15
15
15
15
20
20
25
25
30
30
40
40
60
75
100
125
150
200
300
5
5
7 1/2
7 1/2
10
10
15
15
20
20
30
30
40
40
50
50
50
50
60
60
75
75
125
150
200
250
300
400
600
7 1/2
7 1/2
10
10
15
15
15
15
25
25
25
25
40
40
50
50
60
60
75
75
75
75
150
200
250
350
300
400
600
1
0
1
0
1
0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
2
2
2
2
2
2
2
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
2
2
2
2
2
2
2
Weight
(lb)
Part Number
List Price
0.65
0.65
0.65
0.65
0.65
0.65
0.65
0.65
1.15
1.15
1.19
1.19
2.44
2.44
2.47
2.47
2.49
2.49
3.20
3.20
3.24
3.24
5.60
8.91
13.54
13.54
call
call
call
CWM9-10-30*
CWM9-01-30*
CWM12-10-30*
CWM12-01-30*
CWM18-10-30*
CWM18-01-30*
CWM25-00-30*
CWM25-11-30*
CWM32-00-30*
CWM32-11-30*
CWM40-00-30*
CWM40-11-30*
CWM50-00-30*
CWM50-11-30*
CWM65-00-30*
CWM65-11-30*
CWM80-00-30*
CWM80-11-30*
CWM95-00-30*
CWM95-11-30*
CWM105-00-30*
CWM105-11-30*
CWM150L322X
CWM180L322X
CWM250L322X
CWM300L322X
CWME400L322X
CWME630L322X
CWME800L322X
$42
42
55
55
60
60
71
71
101
101
143
143
163
163
182
182
233
233
284
284
331
331
658
909
1,321
1,514
2,082
3,158
4,620
Replace ‘X’ with code for AC Coil Voltage Code Selection for Contactors CWM9 to CWM105
60 Hz
24V
48V
120V
208-240V
480V
CODE
V04
V10
V18
V24
V47
600V
V56
50 Hz
-
42V
110V
-
400-415V
500V
Replace ‘X’ with AC/DC Coil voltage code selection for Contactors CWM150, 180, 250, 300
Voltage
110-130Vac/Vdc
208-250Vac/Vdc
CODE
E10
E13
Mounting on
CWM112-300
CWM112-300
Replace ‘X’ with AC/DC Coil voltage code selection for Contactors CWM400, 630, 800
Voltage
100-240Vac/100-220Vdc
100-127Vac/100-110Vdc
200-240Vac/200-220Vdc
CODE
E36
E35
E39
D82
Mounting on
CWME400
CWME630-800
CWME630-800
CWME400-800
Industrial Control Products
440-575Vac
4.15
www.pamensky.com
102
CWM Standard Contactors - Accessories
Auxiliary contact blocks for CWM9 to CWME800
•
Terminal markings to EN 50 005 and EN 50 012
•
Positive driven contacts in accordance with IEC/EN 60947-4-1 resp. IEC/EN60947-5-1
Auxiliary
Description
Front Mounting
Front Mounting
Side Mounting
Side Mounting
Side Mounting
Side Mounting, Second Block
For Contactor
CWM9…105
CWM9…105
CWM9…300
CWM9…300
CWM400…CWM800
CWM400…CWM800
NO
NC
1
0
1
2
1
1
0
1
1
0
1
1
Part Number
List Price
BCXMF10
BCXMF01
BCXML11
BCXML20
BCXML11 CWME800
BCXMRL11 CWME800
$5
5
15
15
44
44
Maximum # of added auxiliary contacts per contactor frame size: Note that side mountable version has 2 aux. contacts per block.
CWM9…25 = 4 aux. contacts; CWM32…40 = 6 aux. contacts; CWM50…300E = 8 aux. contacts.
Mechanical Interlock
Auxiliary
Description
Side mounted between two contactors
Side mounted between two contactors
Side mounted between two contactors
Bottom mounted between two contactors
For Contactor
CWM9…105
CWM112…CWM300
CWM400
CWM630…CWM800
NO
NC
0
0
0
0
0
0
0
0
Part Number
List Price
BLIM 9-105
BLIM 112-300
BLIM CWME400
BLIM CWME800
$30
54
44
1424
For CWM9…CWM105 the mechanical interlock can be used to interlock different frame sizes. For CWM112…CWM300, the mechanical interlock has to be
used with contactors that have the same mechanical frame size.
For BLIM CWME800, a metal mount base is provided with this accessory for an accurate assembling of the contactors.
Surge Suppressors
Description
Limits switching transients from contactor pick-up
Limits switching transients from contactor pick-up
4.16
For Contactor
Voltage Range
Part Number
List Price
CWM9...40
CWM50...105
130...250V
130...250V
CWMBAMRC6
CWMBAMRC9
$23
23
Industrial Control Products
102
www.pamensky.com
CWM Standard Contactors - Accessories
Individual spare coils
Description
AC Coil
AC Coil
AC Coil
AC Coil
AC Coil
AC Coil
Dual-Voltage Coils AC/DC (contactors with electronic module)
Dual-Voltage Coils AC/DC (contactors with electronic module)
Dual-Voltage Coils AC/DC (contactors with electronic module)
Dual-Voltage Coils AC/DC (contactors with electronic module)
Dual-Voltage Coils AC/DC (contactors with electronic module)
CWM9....25. CWMC25
CWM32...40. CWMC32
CWM50...105. CWMC50...65
CWM112
CWM180
CWM250
CWM112...150
CWM180
CWM250...300
CWME400
CWME630...800
Part Number
List Price
CWMBCA425X
CWMBCA440X
CWMBCA105X
CWMBCA112X
CWMBCA180X
CWMBCA250X
CWMBCE-150X
CWMBCE-180X
CWMBCE-300X
CWMEBCE-400X
CWMEBCE-800X
$10
16
22
24
44
60
28
44
74
492
600
Replace ‘X’ with code for AC Coil Voltage Code Selection for Contactors CWM9 to CWM105
60 Hz
24V
48V
120V
208-240V
480V
CODE
V04
V10
V18
V24
V47
600V
V56
50 Hz
-
42V
110V
-
400-415V
500V
Replace ‘X’ with AC/DC Coil voltage code selection for Contactors CWM150, 180, 250, 300
Voltage
110-130Vac/Vdc
208-250Vac/Vdc
CODE
E10
E13
Mounting on
CWM112-300
CWM112-300
Replace ‘X’ with AC/DC Coil voltage code selection for Contactors CWM400, 630, 800
Voltage
100-240Vac/100-220Vdc
100-127Vac/100-110Vdc
200-240Vac/200-220Vdc
440-575Vac
CODE
E36
E35
E39
D82
Mounting on
CWME400
CWME630-800
CWME630-800
CWME400-800
Industrial Control Products
4.17
www.pamensky.com
102
CWM Standard Contactors - Technical Data
General Ratings - CWM9 to CWM105
Type
CWM9
Standards
Rated Insulation Voltage Ui
Acc. IEC; VDE 0660
Acc. UL; CSA
Rated Impulse Voltage
Uimp
Acc. IEC60947-1
Rated Operating
Frequency
Degree of Protection
Main terminals
Coil terminals
Auxiliary terminals
Ambient Temperature
Storage
Operating
Altitude
Up to 1,500m
Other altitudes
Pollution Degree
Climatic Withstand
Mounting
Vibration Resistance
(5 to 200 Hz)
Contactor open
Contactor closed at Uc
Mechanical Endurance
AC Coil
Electrical Endurance
AC-3
Shock Resistance
(1/2 sin wave = 11ms)
Contactor open
Contactor closed at Uc
Weight
AC Coil
Terminal Capacity
Fine - Stranded with
sleeve
Coarse - Stranded /
Solid
Stranded / Solid (UL
/ CSA)
CWM12
Operating Position
4.18
CWM25
CWM32
[V]
[V]
CWM40
CWM50
CWM65
CWM80
CWM95
CWM105
1000
600
[kV]
6
8
[Hz]
25…400
Protection against direct contact Acc. VDE 0160 - Part. 100
IP10
IP20
IP20
IP20
-55 to +80oC (-67 to +176oF)
-25 to +55oC (-13 to +131oF)
Nominal values
See graphic on page 94
3
According to IEC 68-2
35mm rail Acc. DIN EN 50 022
[g]
[g]
Million
ops.
Million
ops.
[g]
[g]
[kg]
[lb]
Top
[mm2]
Bottom
[mm2]
Top
[mm2]
Bottom
[mm2]
Top
[AWG]
Bottom
[AWG]
3
6
3
6
lb-in
(Nm)
3
6
7.5
8
8
12
8
12
4.5
9
4.5
9
4.5
9
5
7
5
7
10
1.8
1.6
1.2
1.2
1.1
1.3
1.1
1.1
1
8
12
0.30
0.65
8
12
0.30
0.65
7
12
0.52
1.15
7
12
0.54
1.19
6
10
1.11
2.44
6
10
1.12
2.47
6
10
1.13
2.49
Allen Head
6
10
1.45
3.20
6
10
1.47
3.24
2x0.5-2.5
2x0.5-2.5
2x0.5-2.5
2x1-2.5
0.75-16
0.75-16
1-35
1-35
1-35
1.5-50
1.5-50
or 2x2.5-6
or 2x2.5-6
or 2x2.5-6
or 2x2.5-10
1.0-16
1.0-16
2.5-35
2.5-35
2.5-35
4-35
4-35
2x1-2.5
2x1-2.5
2x1-2.5
2x1-2.5
1-16
1-16
1.5-35
1.5-35
1.5-35
2.5-50
2.5-50
or 2x2.5-6
or 2x2.5-6
or 2x2.5-6
or 2x2.5-10
1.5-16
1.5-16
6-35
6-35
6-35
6-35
6-35
2x20-12
2x20-12
2x20-12
2x18-12
18-6
18-6
16-2
16-2
16-2
16-1
16-1
or 2x12-10
or 2x12-10
or 2x12-10
or 2x12-8
16-6
16-6
14-2
14-2
14-2
10-2
10-2
8.9...15
(1...1.7)
8.9...15
(1...1.7)
Drive Size
Tightening Torque
CWM18
Devices according to International Standards IEC 60947-1 / 60947-4-1, European Standards EN 60947-1 / 60947-4-1,
Underwriters Laboratories - UL 508; CSA C.22.2/14; VDE 0660/102
1.2
1.3
8
8
12
12
0.30
0.30
0.65
0.65
Cross / Slotted Combination
Philips #2
8.9...15
14.2...26.6
(1...1.7)
(1.6...3)
22.1...35..4
(2.5...4)
22.1...35..4 35.4...53.1
(2.5...4)
(4...6)
see next page
Industrial Control Products
35.4...53.1
(4...6)
5/32” (4mm.)
35.4...53.1
44.3...57.5
(4...6)
(5...6.5)
44.3...57.5
(5...6.5)
102
www.pamensky.com
CWM Standard Contactors - Technical Data
General Ratings - CWM112 to CWME800
Type
CWM112
Standards
Rated Insulation Voltage Ui
Acc. IEC; VDE 0660
Acc. UL; CSA
Rated Impulse Voltage
Uimp
Acc. IEC60947-1
Rated Operating
Frequency
Degree of protection
Main terminals
Coil terminals
Auxiliary terminals
Ambient Temperature
Storage
Operating
Altitude
Up to 1,500m
Other altitudes
Pollution Degree
Climatic withstand
Mounting
Vibration Resistance
(5 to 200 Hz)
Contactor open
Contactor closed at Uc
Mechanical Endurance
AC Coil
Electrical Endurance
AC-3
Shock Resistance
(1/2 sin wave = 11ms)
Contactor open
Contactor closed at Uc
Weight
AC/DC Coil - CWM_E
Series only
Terminal Capacity
Fine - Stranded with
sleeve
AWG wires with end
sleeve
Busbars
Tightening Torque
CWM150
CWM180
CWM250
CWM300
CWME400
CWME630
CWME800
Devices according to International Standards IEC 60947-1 / 60947-4-1, European Standards EN 60947-1 / 60947-4-1,
Underwriters Laboratories - UL 508; CSA C.22.2/14; VDE 0660/102
[V]
[V]
1000
600
[kV]
[Hz]
8
25…400
Protection against direct contact acc. VDE 0160 - Part. 100
IP00
IP20
IP20
-55 to +80oC (-67 to +176oF)
-25 to +55oC (-13 to +131oF)
Nominal values
See graphic on page __
up to 2000m
3
According to IEC 68-2
Screw to panel
[g]
[g]
Million
ops.
Million
ops.
4
4
10
1.1
1.1
1.0
5
1.0
[g]
[g]
1.0
0.5
3
3
[kg]
[lb]
2.54
5.60
2.54
5.60
4.04
8.91
6.14
13.54
6.14
13.54
-
-
-
[mm2]
2 x (25-70)
2 x (25-70)
2 x (50-120)
2 x (50-150)
2 x (50-150)
1 x 150
1 x 240
1 x 240
1 x 300
or 2 x 107
2 x (15 x 3)
47.8-53.1
(5.4-6)
1 x 300
or 2 x 107
2 x (20 x 3)
123.9-141.6
(14-16)
1 x 500
1 x 500
or 2 x 300
or 2 x 300
2 x (30 x 5)
2 x (30 x 5)
203.6-230.1
203.6-230.1
(23-26)
(23-26)
see below
Nº2 30×5
Nº2 50×5
Nº2 60×5
[mm]
lb-in
(Nm)
1 x 300
or 2 x 107
2 x (15 x 3)
47.8-53.1
(5.4-6)
203.6
(23)
504.5
(57)
504.5
(57)
Operating Position
Operating Position
CWM9 to CWM105
CWM112 to CWM800
Industrial Control Products
4.19
www.pamensky.com
102
CWM Standard Contactors - Technical Data
Power Contacts - CWM9 to CWM105
Type
Standard UL/CSA Ratings
Rated Operating Voltage
General Purpose Rating
Switching Motor Loads
Full Voltage - 60Hz
1-phase
115V
230V
115V
230V
3-phase
200V
230V
460V
575V
200V
230V
460V
575V
Standard IEC Ratings
Rated Operating Voltage
Rated Thermal Current Ith
Switching Motor Loads
AC-2; AC-3; AC-4 - 50Hz
3-phase 220-240V
380-400V
415-440V
500V
660-690V
220-240V
380-400V
415-440V
500V
660-690V
Maximum Switching Rate
AC-1
AC-3
no load
AC-4
200,000 operations
<= 690V
50/60Hz
220-230V
380-400V
415-440V
500V
660-690V
Maximum Switching Rate
Making Capacity
Breaking Capacity
Ue=400V
Ue<=400V
Ue=500V
Ue=690V
Impedance per Pole
Power Dissipation per Pole
AC-1
AC-3
Short Time Current Icw
1 sec.
5 sec.
10 sec.
30 sec.
1 min.
3 min.
Rec. time
Short Circuit Coordination
Coordination Type “1”
gL/gG
Coordination Type “2”
gL/gG
4.20
CWM9
CWM12
CWM18
CWM25
CWM32
CWM40
CWM50
CWM65
CWM80
CWM95
CWM105
[V]
[A]
25
25
32
32
60
600
60
90
110
110
140
140
[A]
[A]
[HP]
[HP]
[A]
[A]
[A]
[A]
[HP]
[HP]
[HP]
[HP]
9.8
10
1/2
1-1/2
11
9.6
7.6
9
3
3
5
7-1/2
13.8
12
3/4
2
11
9.6
11
11
3
3
7-1/2
10
16
17
1
3
17.5
15.2
14
17
5
5
10
15
24
28
2
5
25
22
21
17
7-1/2
7-1/2
15
15
34
28
3
5
32.2
28
27
27
10
10
20
25
34
28
3
5
32.2
42
40
27
10
15
30
25
56
40
5
7-1/2
48.3
42
52
41
15
15
40
40
56
50
5
10
62.1
54
65
52
20
20
50
50
80
68
7-1/2
15
62.1
68
65
62
20
25
50
60
80
68
7-1/2
15
78.2
80
77
77
25
30
60
75
100
88
10
20
92
104
96
77
30
40
75
75
[V]
[A]
25
25
32
45
60
60
90
110
1000
110
140
140
[A]
[A]
[A]
[A]
[A]
[kW]
[kW]
[kW]
[kW]
[kW]
9
9
9
7.5
7
2.2
4
4
5.5
5.5
12
12
12
10.5
9
3
5.5
5.5
7.5
7.5
18
18
18
14
13
4
7.5
7.5
10
10
25
25
25
19
15
7.5
11
11
15
15
32
32
32
24
22
9
15
15
18.5
18.5
40
40
40
32
25
11
18.5
22
25
30
50
50
50
38
34
15
22
25
30
35
65
65
65
55
44
18.5
30
37
40
45
80
80
80
63
48
22
37
45
45
45
95
95
95
79
60
25
45
50
55
55
105
105
105
85
80
30
55
55
65
65
[ops/hr]
[ops/hr]
[ops/hr]
1,200
1,200
9,000
1,200
1,200
9,000
1,200
1,200
9,000
1,200
1,200
9,000
1,200
1,200
9,000
1,200
1,200
9,000
1,200
1,200
5,000
1,200
1,200
5,000
1,200
1,200
5,000
1,200
600
5,000
1,200
600
5,000
[A]
[kW]
[HP]
[kW]
[HP]
[kW]
[HP]
[kW]
[HP]
[kW]
[HP]
[ops/hr]
[A]
5
1.1
1.5
2.2
3
2.2
3
3
4
3
4
360
450
7
1.5
2
3
4
3.7
5
4
5.4
4.5
6
360
450
8
1.5
2
3.7
5
4.5
6
5.5
7.5
5.5
7.5
360
450
12
3
4
5.5
7.5
5.5
7.5
7.5
10
7.5
10
360
450
16
4
5.4
7.5
10
9.2
12.5
10
13
11
15
360
550
18.5
4.5
6
9.2
12.5
11
15
11
15
12.5
17
200
1000
23
5.5
7.5
11
15
11
15
15
20
15
20
200
1000
30
7.5
10
15
20
15
20
18.5
25
20
27
200
1000
37
9.2
12.5
18.5
25
22
30
22
30
25
33
200
1000
44
11
15
22
30
22
30
25
33
30
40
200
1280
50
12.5
17
22
30
30
40
30
40
33
45
200
1280
690
[A]
250
250
250
450
450
920
920
920
920
1050
1050
[A]
[A]
[mW]
250
130
2.41
250
130
2.41
250
130
2.35
320
170
1.65
450
205
1.28
920
780
0.95
920
780
0.85
920
780
0.86
920
780
0.86
1050
950
0.76
1050
950
0.76
[W]
[W]
1.47
0.19
1.47
0.34
2.46
0.78
3.34
1.03
4.6
1.31
3.42
1.52
6.86
2.12
10.4
3.63
10.4
5.5
14.89
6.86
14.89
8.37
[A]
[A]
[A]
[A]
[A]
[A]
[min.]
455
205
144
85
60
35
10
455
205
144
85
60
35
10
570
254
180
104
74
46
10
630
280
200
115
80
50
10
1010
450
320
185
130
90
10
1265
450
400
230
165
100
10
1580
710
500
290
205
120
10
2530
1130
800
460
325
185
10
2530
1130
800
460
325
185
10
3300
1485
1050
600
430
250
10
3300
1485
1050
600
430
250
10
[A]
[A]
50
25
50
35
63
35
63
50
100
63
125
80
200
100
200
125
200
125
250
160
250
200
Industrial Control Products
102
www.pamensky.com
CWM Standard Contactors - Technical Data
Power Contact - CWM112 to CWME800
Type
UL/CSA Applications
Rated Operating Voltage
General Purpose Rating
Switching Motor Loads
Full Voltage - 60Hz
1-phase
115V
230V
115V
230V
200V
230V
460V
575V
200V
230V
460V
575V
3-phase
Standard IEC Ratings
Rated Operating Voltage
Rated Thermal Current Ith
Switching Motor Loads
AC-3 - 60Hz
3-phase
220-240V
380-400V
415-440V
500V
660-690V
220-240V
380-400V
415-440V
500V
660-690V
Maximum Switching
Rate
AC-1
AC-3
no load
AC-4
200,000 operations
<= 690V
50/60Hz
220-230V
380-400V
415-440V
500V
660-690V
Maximum Switching
Rate
Making Capacity
Breaking Capacity
CWM112
CWM150
CWM180
CWM250
CWM300
CWME400
CWME630
CWME800
[V]
[A]
170
170
200
300
400
450
660
900
[A]
[A]
[HP]
[HP]
[A]
[A]
[A]
[A]
[HP]
[HP]
[HP]
[HP]
120
130
124
99
40
50
100
100
150
154
156
144
50
60
125
150
177
192
180
192
60
75
150
200
221
248
240
242
75
100
200
250
285
312
302
336
100
125
250
350
359
360
361
289
125
150
300
300
414
480
477
382
150
200
400
400
552
772
200
300
600
600
[V]
[A]
180
225
225
350
350
450
660
900
[A]
[A]
[A]
[A]
[A]
[kW]
[kW]
[kW]
[kW]
[kW]
112
112
112
95
82
30
55
55
55
75
150
150
150
130
110
45
75
90
90
110
180
180
180
155
135
55
90
110
110
110
250
250
250
220
185
75
132
150
160
160
300
300
300
265
220
90
160
185
200
200
400
400
400
350
300
110
220
220
220
260
630
630
630
500
420
185
330
370
330
400
800
800
800
720
630
220
450
500
500
560
[ops/hr]
[ops/hr]
[ops/hr]
600
600
1,000
600
600
1,000
600
600
1,000
600
600
1,000
600
600
1,000
500
500
1,000
500
500
1,000
500
500
1,000
[A]
[kW]
[HP]
[kW]
[HP]
[kW]
[HP]
[kW]
[HP]
[kW]
[HP]
50
18.5
25
30
40
37
50
40
54
45
600
55
20
27
33
44
40
54
45
60
50
67
58
22
30
37
50
45
60
50
67
55
75
100
37
50
55
75
63
84
75
100
90
121
130
45
60
75
100
80
107
90
121
100
133
90
125
150
200
185
250
-
110
150
220
300
220
300
-
185
250
330
450
370
500
-
-
-
-
600
1000
[ops/hr]
150
150
150
150
150
[A]
1430
1820
2100
2600
3000
[A]
[A]
[mW]
1290
1290
0.5
1350
1350
0.5
1400
1400
0.45
2000
2000
0.3
0.3
4000
4000
-
6300
6300
-
8000
8000
-
AC-1
AC-3
[W]
[W]
16
6.2
25
11.1
21.6
13.8
35
17.9
45.7
25.7
-
-
-
1 sec.
5 sec.
10 sec.
30 sec.
1 min.
3 min.
[A]
[A]
[A]
[A]
[A]
[A]
[min.]
3165
1820
1430
826
584
337
10
3763
2164
1700
980
694
401
10
4649
2673
2100
1212
857
495
10
4427
2546
2000
1155
816
471
10
10
-
-
-
gL/gG
gL/gG
[A]
[A]
315
224
355
250
355
250
500
400
630
500
630
-
800
-
1000
-
Ue<=400V
Ue=500V
Impedance per pole
Power Dissipation per Pole
Short Time Current Icw
Recovery time
Short Circuit Coordination
Coordination type “1”
Coordination type “2”
Industrial Control Products
4.21
www.pamensky.com
102
CWM Standard Contactors - Technical Data
Built-in Auxiliary Contacts - CWM9 to CWM18
Type
CWM9
Rated Insulation Voltage Ui
Acc. IEC; VDE 0660
Acc. UL; CSA
Rated Operating Voltage Ue
Acc. IEC; VDE 0660
Acc. UL; CSA
Rated Thermal Current Ith <=55oC
Rated Operating Current Ie
CWM12
[V]
[V]
1000
600
[V]
[V]
[A]
690
600
20
110-127V
220-240V
380-400V
415-450V
500V
660-690V
[A]
[A]
[A]
[A]
[A]
[A]
10
10
6
5
4
2
A600
24V
48V
110V
220V
440V
[A]
[A]
[A]
[A]
[A]
6
4
2
0.7
0.7
P600
Ue <= 690V 50/60Hz
Ue <= 440Vdc
[A]
[A]
250
250
Ue <= 400V 50/60Hz
Ue <=220Vdc
[A]
[A]
250
2
[A]
[V/mA]
Million ops.
Million ops.
[ms]
[MOhm]
10
17/5
1
10
1.5
>10
Acc. IEC 60947-5-1 / AC-15
Acc. UL; CSA
Rated Operating Current Ie
Acc. IEC 60947-5-1 / DC-13
Acc. UL; CSA
Making Capacity Im
AC-15 / AC-11
DC-13 / DC-11
Breaking Capacity Ic
AC-15 / AC-11
DC-13 / DC-11
Short Circuit Protection with Fuses
Acc. IEC 60947-5-1 - gL/gG
Minimum Switching Capacity
Electrical Endurance
Mechanical Endurance
Guaranteed Non-Overlap Time
Insulation Resistance
CWM18
Control Circuit Ratings - AC Coil - CWM9 to CWM105
Type
Rated Insulation Voltage Ui
Acc. IEC; VDE 0660
Acc. UL; CSA
Rated Operating Voltage Ue
Acc. IEC; VDE 0660
Acc. UL; CSA
Standard Voltages 60Hz
Coil Operating limits
Monofrequency coils xUc
Pick-up xUc
Drop-out xUc
Reinforced coils xUc
Pick-up xUc
Drop-out xUc
Operating Time
Coil energization - N.O.
Coil de-energization - N.O.
Coil Consumption
Monofrequency coils
Sealed
Inrush
Thermal Power Dissipation
60Hz
Power Factor
Closed
Opened
4.22
CWM9
CWM12
CWM18
CWM25
CWM32
CWM40
[V]
[V]
1000
600
[V]
[V]
[V]
690
600
24...600
[V]
[V]
0.4...0.76
0.25...0.65
CWM50
CWM65
0.85…1.1
0.5...0.76
0.3...0.65
CWM80
CWM95
CWM105
0.5...0.76
0.25...0.6
[V]
[V]
0.4...0.7
0.3...0.6
[ms]
[ms]
8...20
6...13
10...19
5...25
[VA]
[VA]
5.5...9.3
70
9.5...12.5
115
[W]
2.6
4.3
8.0
Cos phi
Cos phi
0.28
0.85
0.34
0.69
0.32
0.54
Industrial Control Products
15...30
9...15
16.8...25
295
16.8...25
295
102
www.pamensky.com
CWM Standard Contactors - Technical Data
Control Circuit Ratings - DC Coil - CWM9 to CWM105
Type
Rated Insulation Voltage Ui
Acc. IEC; VDE 0660
Acc. UL; CSA
Standard Voltages
Coil Operating limits
Pick-up xUc
Drop-out xUc
Operating Time
Coil energization - N.O.
Coil de-energization - N.O.
Coil Consumption
Closed
Magnetic circuit opened
CWM9
CWM12
CWM18
CWM25
CWM32
CWM40
CWM50
CWM65
1000
600
24...240
0.85...1.1
0.45...0.75
0.15...0.45
CWM80
[V]
[V]
[V]
12...440
[V]
[V]
0.4...0.7
0.15...0.4
[ms]
[ms]
35...45
7...12
40...55
30...65
50...60
55...60
[W]
[W]
3.8...7.5
3.8...7.5
6
240
6.5
340
CWM95
CWM105
24...240
0.7...0.8
0.4...0.6
Electronic Module Control Circuit - CWM112 to CWME800
Type
Rated Insulation Voltage Ui
Acc. IEC; VDE 0660
Acc. UL; CSA
Rated Operating Voltage Ue
Acc. IEC; VDE 0660
Acc. UL; CSA
Standard Voltages 50Hz; 60Hz; DC
Coil Operating limits
xUc
Pick-up xUc
Drop-out xUc
Operating Time
Coil energization - N.O.
Coil de-energization - N.O.
Coil Consumption
Closed AC
Opened AC
Closed DC
Opened DC
Thermal Power Dissipation
AC
DC
CWM112
CWM150
CWM180
CWM250
CWM300
[V]
[V]
1000
600
[V]
[V]
[V]
690
600
24…600
[V]
[V]
[V]
0.65…1.1
0.70...0.85
0.40...0.60
CWME400
CWME630
CWME800
[ms]
[ms]
60…70
13…17
60…70
13…17
60…70
13…17
60…70
13…17
60…70
13…17
64…68
43…47
66…70
45…49
66…70
45…49
[VA]
[VA]
[VA]
[VA]
14.8
213
2.4
166
14.8
213
2.4
166
14.1
214
2.4
154
14.1
229
2.5
171
14.1
229
2.5
171
14
571
14
571
17
1000
17
1000
29
1000
17
1000
[W]
[W]
3.9
2.4
3.9
2.4
3.8
2.4
3.7
2.5
3.7
2.5
4.7
5.0
4.9
6.3
5.3
7.8
Industrial Control Products
4.23
www.pamensky.com
102
CWM Standard Contactors - Technical Data
Auxiliary Contact Block Ratings
Type
Rated Insulation Voltage Ui
Acc. IEC; VDE 0660
Acc. UL; CSA
Rated Operating Voltage Ue
Acc. IEC; VDE 0660
Acc. UL; CSA
Rated Thermal Current Ith <=55oC
Rated Operating Current Ie
Acc. IEC 60947-5-1 / AC-15
Acc. UL; CSA
Rated Operating Current Ie
Acc. IEC 60947-5-1 / DC-13
Acc. UL; CSA
Making Capacity Im
AC-15 / AC-11
DC-13 / DC-11
Breaking Capacity Ic
AC-15 / AC-11
DC-13 / DC-11
Short Circuit Protection with Fuses
Acc. IEC 60947-5-1 - gL/gG
Minimum Switching Capacity
Electrical Endurance
Mechanical Endurance
Guaranteed Non-Overlap Time
Insulation Resistance
4.24
BCXMF
BCXML
BCXMRL
[V]
[V]
1000
600
[V]
[V]
[A]
690
600
10
110-127V
220-240V
380-400V
415-450V
500V
660-690V
[A]
[A]
[A]
[A]
[A]
[A]
6
6
4
3.5
2.5
1.5
A600
24V
48V
110V
220V
440V
[A]
[A]
[A]
[A]
[A]
4
2
0.7
0.3
0.15
Q600
Ue <= 400V 50/60Hz
Ue <= 220Vdc
[A]
[A]
90
90
Ue <= 400V 50/60Hz
Ue <= 220Vdc
[A]
[A]
60
0.95
[A]
[V/mA]
Million ops.
Million ops.
[ms]
[MOhm]
10
17/5
1
10
1.5
>10
Industrial Control Products
BLIM.02
102
www.pamensky.com
RW Thermal Overload Relays
RW overload relays are important equipment within the WEG Controls range of products. As
usual for WEG products, an extended operational service life is one of the main features you
will find in RW overload relays. WEG’s RW Class 10 Thermal Overload Relays are designed
to work with, and compliment WEG’s minicontactors and contactors. Effectively, RW overload
relays can be mounted directly to WEG minicontactors and contactors, assuring electrical and
mechanical operation as an open across-the-line starter.
Features
Dial FLC Setting
The trip-current is set via an infinitely adjustable dial designed for the motor’s full load current.
Temperature Compensation
Because RW overload relays include a fourth bimetallic strip in addition to the three that are
directly heated by the motor current, ambient temperature variations in the range of -20ºC
to +60ºC are no obstacle for accurate protection of your motors under even the toughest
conditions.
Phase Failure Sensitivity
WEG overload relays include phase failure sensitivity protection as standard. This feature
ensures fast tripping in case of phase loss, protecting your motor and avoiding expensive
repairs or corrective maintenance services.
Multi Function Button
The programmable RESET button can be selected to operate in a Manual or Automatic mode,
with or without TEST capabilities of the isolated “trip” NC and “alarm” NO auxiliary contacts.
The multifunction RESET / TEST button can be set in four different positions; H (manual
RESET only), HAND (manual RESET/TEST), AUTO (automatic RESET/ TEST) and A (automatic
RESET only). In HAND and AUTO positions, when RESET button is pushed, both NO (97-98)
and NC (95-96) contacts change states.
Industrial Control Products
4.25
www.pamensky.com
102
RW - Part Number Specification
RW
27-1D
3
1
2
3
1.
RW Thermal Overload Relay
2.
Frame Size and
Terminal Type:
17-1D: to use with CWC07…016
17-2D: to use with CWC025
27-1D: to use with CWM9…25
67-1D: to use with CWM32…40
67-2D: to use with CWM50…80
117-1D: to use with CWM95…105
117-2D: to use with CWM112…150
317-1D: to use with CWM112…300
407-1D: to use with CWME400…800
3.
Power Pole:
3: 3 NO Power Poles
2: 2 NO Power Poles
4.
Overload Setting
Current:
4.26
RW17
RW27
- D004
4
RW67
RW117
RW317
RW407
Description
Code
Description
Code
Description
Code
Description
Code
Description
Code
Description
Code
0.28 ... 0.40A
D004
0.28 ... 0.40A
D004
25 ... 40A
U040
63 … 80A
U080
100 … 150A
U150
400 … 600A
U600
11 … 32A
U032
11 … 32A
U032
63 … 80A
U080
90 ... 112A
U112
275 ... 420A
U420
560 ... 840A
U840
Industrial Control Products
102
www.pamensky.com
RW Thermal Overload Relays - Table of Products
Three Pole Contactors with AC Coil
Electrical Data
Purchasing Data
Setting Range (A)
List Price
Max.
Max. Fuse
(A)
Part Number
Min.
0.28
0.40
0.56
0.80
1.20
1.80
2.80
4.00
5.60
7.00
8.00
10.0
11.0
15.0
22.0
0.28
0.40
0.56
0.80
1.20
1.80
2.80
4.00
5.60
7.00
8.00
10.0
11.0
15.0
22.0
25.0
32.0
25.0
32.0
40.0
50.0
57.0
63.0
63.0
75.0
90.0
75.0
90.0
100
140
200
275
400
560
0.40
0.63
0.80
1.20
1.80
2.80
4.00
6.30
8.00
10.0
12.5
15.0
17.0
23.0
32.0
0.40
0.63
0.80
1.20
1.80
2.80
4.00
6.30
8.00
10.0
12.5
15.0
17.0
23.0
32.0
40.0
50.0
40.0
50.0
57.0
63.0
70.0
80.0
80.0
97.0
112
97
112
150
215
310
420
600
840
15
15
15
15
15
15
15
25
30
40
50
60
60
90
100
15
15
15
15
15
15
15
25
30
40
50
60
60
90
90
90
125
90
125
150
150
175
175
200
225
250
225
250
300
350
500
700
1000
1250
RW17-1D3-D004
RW17-1D3-C063
RW17-1D3-D008
RW17-1D3-D012
RW17-1D3-D018
RW17-1D3-D028
RW17-1D3-U004
RW17-1D3-D063
RW17-1D3-U008
RW17-1D3-U010
RW17-1D3-D125
RW17-1D3-U015
RW17-1D3-U017
RW17-2D3-U023
RW17-2D3-U032
RW27-1D3-D004
RW27-1D3-C063
RW27-1D3-D008
RW27-1D3-D012
RW27-1D3-D018
RW27-1D3-D028
RW27-1D3-U004
RW27-1D3-D063
RW27-1D3-U008
RW27-1D3-U010
RW27-1D3-D125
RW27-1D3-U015
RW27-1D3-U017
RW27-1D3-U023
RW27-1D3-U032
RW67-1D3-U040
RW67-1D3-U050
RW67-2D3-U040
RW67-2D3-U050
RW67-2D3-U057
RW67-2D3-U063
RW67-2D3-U070
RW67-2D3-U080
RW117-1D3-U080
RW117-1D3-U097
RW117-1D3-U112
RW117-2D3-U097
RW117-2D3-U112
RW317-1D3-U150
RW317-1D3-U215
RW317-1D3-U310
RW317-1D3-U420
RW407-1D3-U600
RW407-1D3-U840
$44
44
44
44
44
44
44
44
44
44
44
44
44
45
45
48
48
48
48
48
48
48
48
54
54
54
54
54
54
54
92
100
100
100
100
152
152
152
152
152
152
154
154
215
215
269
269
632
692
For Contactor
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC07…CWC016 & CWCA0 (Mini-Contactor)
CWC025 (Mini-Contactor)
CWC025 (Mini-Contactor)
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM9...CWM40
CWM32...CWM40
CWM32...CWM40
CWM50...CWM80
CWM50...CWM80
CWM50...CWM80
CWM50...CWM80
CWM50...CWM80
CWM50...CWM80
CWM95...CWM105
CWM95...CWM105
CWM95...CWM105
CWM112E...CWM150E
CWM112E...CWM150E
CWM112E…CWM300E
CWM112E…CWM300E
CWM112E…CWM300E
CWME400...CWME800
CWME400...CWME800
CWME400...CWME800
RW Thermal Overload Relays - Accessories
Mounting Brackets
Description
Enables overload to be mounted directly to a panel via screws or DIN rail
Enables overload to be mounted directly to a panel via screws or DIN rail
Enables overload to be mounted directly to a panel via screws or DIN rail
Enables overload to be mounted directly to a panel via screws or DIN rail
RW27-1D
RW67-1D
RW67-2D
RW117-1D
Industrial Control Products
Part Number
List Price
BF27D
BF67.1D
BF67.2D
BF117D
$14
24
24
30
4.27
www.pamensky.com
102
RW Thermal Overload Relays - Technical Data
General Ratings
Type
Standards
Number of poles
Tripping Class
Phase failure sensitivity
Temperature Compensation
Multi function button R
Rated Insulation Voltage Ui
acc. IEC 60947-4-1
acc. UL; CSA
Rated Operation Voltage Ue
acc. IEC 60947-4-1
acc. UL; CSA
Rated Impulse Voltage
Uimp
Current
direct
alternating
Degree of protection
Temperature Compensation
Storage
Operating
Pollution Degree
Mounting
Power Dissipation per pole
Weight
Dimensions
height
width
lenght
Shock Resistance
IEC 60 068 part 2-27
Front auxiliary contact
Rated auxiliary contacts
24V
60V
125V
AC (AC-14/15), 230V
400V
500V
690V
DC (DC-13/14), 24V
60V
110V
220V
Rated thermal current
Short Circuit protection
Fuses type D or NH
RW17D
RW27D
RW67D
RW117D
RW317D
Devices according to International Standards, IEC 60947-4-1 and Underwriters Laboratories, UL
3
10
Yes
Yes
Yes
[V]
[V]
690
[V]
[V]
690
1000
600
1000
600
kV
6
Hz
W
Kgs.
Lbs.
0.15
0.33
up to 3
mm
mm
mm
45
79.5
92
yes
up to 400 Hz
Protection against direct contact acc. VDE 0160 - Part 100 - IP20
-20 to +60oC (-4 to 140oF)
-50 to +80oC (-58 to 176oF)
-20 to +70oC (-4 to 158oF)
3
Direct on contactor or separately with the accessory
up to 5.5
0.147
0.31
0.52
0.323
0.683
1.15
79.5
45
92
73
50
106
100
75
99
g/ms
8/10
1 NO + 1 NC
A
A
A
A
A
A
A
A
A
A
A
A
4
3.5
3
2
1.5
0.5
0.3
1
0.5
0.25
0.1
6
gL/gG
6
no
50/60 Hz
2.3
5.06
155
115
166
Terminal Capacity
Type
Terminal Description
Fine - Stranded with Sleeve
Coarse - Stranded / Solid
Slide Bars max.
Tightening Torque
Stranded / Solid (UL / CSA)
Tightening Torque
4.28
(mm2)
(mm2)
(mm2)
Nm
AWG - min and max.
Lb-in
RW17D
RW27D
1.5 - 10
1.5 - 6.0
1.4 - 2.3
14 - 6
20
Cross / Slotted Combination
1.5 - 10
1.5 - 6.0
1.4 - 2.3
14 - 6
20
Industrial Control Products
RW67D
RW117D
RW317D
6.0 - 35
6.0 - 35
4.0 - 6.0
18 - 2
20
Allen Head
6.0 - 35
25 - 35
4.0 - 6.0
8 – 1/0
40
Slide bar
2x(25x5)
14 - 26
8 – 1/0
40
102
www.pamensky.com
RW Thermal Overload Relays - Technical Data
Operating Positions
RW17D, RW27D, RW67D, RW117D, RW317D, RW407D
Mounting without contactor
The relays can be mounted at any position.
RW27D, RW67D, RW117D, RW317D, RW407D
Mounting without contactor
The mounting position showed in the left-hand figure is equivalent to 0° - not requiring a correction factor on
the dial of the relay. The assembly can work with mounting variations of 0° to 180°. However, the mounting
with the relay above the contactor, position between 135° and 225°, requires a correction factor of +10% on
the dial of the relay. Laterally, as shown in the right-hand figure, the inclination can not exceed ±30° for perfect
functioning of the contactor.
RW17D with CWC07
As shown in the left-hand figure, the inclination can not exceed ±30° for perfect functioning of the contactor.
Laterally, as shown in the right-hand figure, the mounting position is equivalent to 0° - not requiring a correction
factor on the dial of the relay. The assembly can work with mounting variations of 0° to 180°.
Industrial Control Products
4.29
www.pamensky.com
102
MPW Manual Motor Protector
WEG Manual Motor Protectors are the state-of-the-art products available for the worldwide
market. With the latest technology and design, you’ll find how easy is to save panel space
and to face almost any application in motor control. Built in a very compact frame size, WEG’s
Manual Motor Protectors combine, motor control, disconnect means short-circuit and motor
overload protections in just one component.
These devices include pushbutton operators or a three-position rotary ON-TRIP-OFF handle,
which can be padlocked in the OFF position. WEG Manual Motor Protectors are designed for
DIN rail mounting, while lugs for direct panel mounting are also available as an accessory.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
High short-circuit interrupting rating – up to
50kA @ 480V
Current limiting short-circuit protection
Thermal overload protection Class 10
Phase loss sensitivity protection
Ambient temperature compensation -4ºF
+140ºF (-20ºC +60ºC)
Lockable rotary handle mechanism for
disconnect
Visual indication of ON-TRIP-OFF status
35mm DIN-rail mounting
Snap-in accessories
Finger safe protected terminals
Rated for DC applications
Test trip feature
Coordination type 2 per IEC60947-4-1 and
UL508E, with WEG’s CWM contactors
Manual Motor Starters
Group motor installations (per NEC Article
430)
Multi-motor starter applications
Suitable for motor disconnect applications
UL Type-E self protected combination starter
4.30
Industrial Control Products
102
www.pamensky.com
MPW - Part Number Specification
MPW
25
1
2
-
1.
MPW Manual Motor Protector
2.
Frame Size:
25: to use with CWC07…025 & CWM9…40
65: to use with CWM32…80
100: to use with CWM95…105
3.
Power Pole:
3: 3 NO Power Poles
4.
Overload Setting
Current:
3
-
3
MPW25
U016
4
MPW65
MPW100
Description
Code
Description
Code
Description
Code
0.10 ... 0.16A
C016
10 … 16A
U016
55 … 75A
U075
25 … 32A
U032
50 ... 65A
U065
80 ... 100A
U100
Industrial Control Products
4.31
www.pamensky.com
102
MPW Manual Motor Protector - Table of Products
Manual Motor Protector MPW25
Electrical Data
Purchasing Data
Maximum UL Horsepower
Single Phase
Thermal
Setting
Three Phase
Short-Circuit
interruption capacity
115V
230V
200V
230V
460V
575V
[A]
480V
600V
1/8
1/4
1/2
1
1 1/2
2
-
1/10
1/6
1/3
3/4
1 1/2
3
3
3
5
1/4
1/2
3/4
1 1/2
3
5
5
7 1/2
10
1/3
1/2
1
1 1/2
3
5
7 1/2
7 1/2
10
3/4
1 1/2
2
3
5
10
15
15
20
1
1 1/2
3
5
7 1/2
15
15
20
25
1.0 - 1.6
1.6 - 2.5
2.5 - 4.0
4.0 - 6.3
6.3 - 10
10 - 16
16 - 20
20 - 25
25 - 32
50kA
50kA
50kA
50kA
50kA
50kA
50kA
50kA
42kA
25kA
25kA
25kA
25kA
25kA
25kA
25kA
25kA
25kA
Part Number
List
Price
MPW25-3-D016
MPW25-3-D025
MPW25-3-U004
MPW25-3-D063
MPW25-3-U010
MPW25-3-U016
MPW25-3-U020
MPW25-3-U025
MPW25-3-U032
$100
100
100
100
110
110
124
146
158
Manual Motor Protector MPW65
Electrical Data
Purchasing Data
Maximum UL Horsepower
Single Phase
Thermal
Setting
Three Phase
Short-Circuit
interruption capacity
115V
230V
200V
230V
460V
575V
[A]
480V
600V
3
5
7 1/2
10
10
15
20
15
15
20
25
30
50
30
40
60
32 ... 40
40 ... 50
50 ... 65
35kA
35kA
35kA
10kA
10kA
10kA
Part Number
List
Price
MPW65-3-U040
MPW65-3-U050
MPW65-3-U065
$300
300
300
Manual Motor Protector MPW100
Electrical Data
Purchasing Data
Maximum UL Horsepower
Single Phase
Thermal
Setting
Three Phase
Short-Circuit
interruption capacity
115V
230V
200V
230V
460V
575V
[A]
480V
600V
5
7 1/2
10
15
20
20
20
25
30
25
30
30
50
60
75
60
75
100
55 ... 75
70 ... 90
80 ... 100
50kA
50kA
50kA
10kA
10kA
10kA
4.32
Industrial Control Products
Part Number
List
Price
MPW100-3-U075
MPW100-3-U090
MPW100-3-U100
$500
534
534
102
www.pamensky.com
MPW Manual Motor Protector - Accessories
Auxiliary Contact Blocks
Description
1NO&1NC auxiliary contact block front mounting - 250Vmax.
1NO&1NC auxiliary contact block left side mounting - 600Vmax.
2NO Auxiliary contact block left side mounting - 600Vmax.
2NC Auxiliary contact block left side mounting - 600Vmax.
1NO&1NC auxiliary contact block front mounting - 250Vmax.
1NO&1NC auxiliary contact block left side mounting - 600Vmax.
2NO Auxiliary contact block left side mounting - 600Vmax.
2NC Auxiliary contact block left side mounting - 600Vmax.
For Protector
Part Number
List Price
MPW25 & MPW65
MPW25 & MPW65
MPW25 & MPW65
MPW25 & MPW65
MPW100
MPW100
MPW100
MPW100
ACBF-11
ACBS-11
ACBS-20
ACBS-02
ACBF-11 MPW100
ACBS-11 MPW100
ACBS-20 MPW100
ACBS-02 MPW100
$14
14
14
14
28
40
40
40
For Protector
Part Number
List Price
MPW25
LST25
$31
MPW25 & MPW65
TSB-22
33
MPW65
MPW100
MPW100
LST65
IB MPW100
TSB-11 MPW100
68
15
40
For Protector
Part Number
List Price
MPW25
ECCMP-07
$11
MPW25
ECCMP-25
11
For Protector
Part Number
List Price
MPW25
MPW25
MPW25
MPW25
MPW25
MPW25
MPW25
MPW25
MPW25
FTBBS
BBS45-2
BBS45-3
BBS45-4
BBS45-5
BBS54-2
BBS54-3
BBS54-4
BBS54-5
$23
24
28
36
38
28
32
38
39
Accessories for Combination Type-E Construction
Description
Line power terminal
Trip Signaling and Alarm Contact Block (1NO&1NC for Short-circuit and 1NO&1NC for
Overload)
Line power terminal
Insulators
Trip Signaling and Alarm Contact Block (1NO&1NC for Short-circuit and Overload)
Link Modules
Description
Mechanical and electrical link module for CWC07 to CWC016 miniature contactor
series
Mechanical and electrical link module for CWM9…CWM25 contactor series
Accessories for Group Motor Installation
Description
Income power terminal for bus bar system
Bus bar system 45mm (for 2 MPW without side mounting auxiliary contacts)
Bus bar system 45mm (for 3 MPW without side mounting auxiliary contacts)
Bus bar system 45mm (for 4 MPW without side mounting auxiliary contacts)
Bus bar system 45mm (for 5 MPW without side mounting auxiliary contacts)
Bus bar system 54mm (for 2 MPW with side mounting auxiliary contacts)
Bus bar system 54mm (for 3 MPW with side mounting auxiliary contacts)
Bus bar system 54mm (for 4 MPW with side mounting auxiliary contacts)
Bus bar system 54mm (for 5 MPW with side mounting auxiliary contacts)
Industrial Control Products
4.33
www.pamensky.com
102
MPW Manual Motor Protector - Accessories
Through-the-door Rotary Mechanisms NEMA 1
Description
Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 130mm shaft
Rotary NEMA 1 Through the Door Mechanism - yellow/red handle with 130mm shaft
Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 330mm shaft
Rotary NEMA 1 Through the Door Mechanism - yellow/red handle with 330mm shaft
Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 130mm shaft
Rotary NEMA 1 Through the Door Mechanism - yellow/red handle with 130mm shaft
Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 330mm shaft
Rotary NEMA 1 Through the Door Mechanism - yellow/red handle with 330mm shaft
Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 115 mm shaft
Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 315mm shaft
For Protector
Part Number
List Price
MPW25
MPW25
MPW25
MPW25
MPW65
MPW65
MPW65
MPW65
MPW100
MPW100
RMMP-130
RMMP-130-E
RMMP-330
RMMP-330-E
RMMP65-130
RMMP65-130-E
RMMP65-330
RMMP65-330-E
MR MPW100-115
MR MPW100-315
$58
58
69
69
58
58
69
69
80
80
For Protector
Part Number
List Price
MPW25
MPW25
MPW25
MPW25
MPW65
MPW65
MPW65
MPW65
MPW100
MPW100
MRX-130
MRX-130-E
MRX-330
MRX-330-E
MRX65-130
MRX65-130-E
MRX65-330
MRX65-330-E
MRX100-130
MRX100-130E
62
62
72
72
63
63
72
72
86
86
Through-the-door Rotary Mechanisms NEMA 4X
Description
Rotary NEMA 4X Through the Door Mechanism - gray/black handle with 130mm shaft
Rotary NEMA 4X Through the Door Mechanism - yellow/red handle with 130mm shaft
Rotary NEMA 4X Through the Door Mechanism - gray/black handle with 330mm shaft
Rotary NEMA 4X Through the Door Mechanism - yellow/red handle with 330mm shaft
Rotary NEMA 4X Through the Door Mechanism - black/red handle with 130mm shaft
Rotary NEMA 4X Through the Door Mechanism - yellow/red handle with 130mm shaft
Rotary NEMA 4X Through the Door Mechanism - black/red handle with 330mm shaft
Rotary NEMA 4X Through the Door Mechanism - yellow/red handle with 330mm shaft
Rotary NEMA 4X Through the Door Mechanism - gray/black handle with 130mm shaft
Rotary NEMA 4X Through the Door Mechanism - yellow/red handle with 130mm shaft
4.34
Industrial Control Products
102
www.pamensky.com
MPW Manual Motor Protector - Technical Data
General Ratings
Part Number
Maximum Rated Current Imax(Iu)
Number of poles
Instantaneous short-circuit
Rated operational voltage Ue
Rated operational frequency 2)
Insulation Voltage Ui
Rated impulse withstand voltage Uimp
IEC 60 947-2 (Circuit breaker)
Utilization category
IEC 60 947-4-1 (Motor starter)
Tripping Test
Overload Protection
Phase failure sensitivity
Tripping indication
Tripping Class
Maximum operation per hour
Operations/hour
Altitude (m)
Degree of protection
Mechanical life span
Number of operations
Electrical life span
Number of operations
Ambient temperatures allowed
Transport and storage
Operation 3)
Temperature compensation
Resistance to Impact (g)
Standards
IEC/EN 60 947-1. DIN VDE 0660 (part 100)
IEC/EN 60 947-2. DIN VDE 0660 (part 101)
IEC/EN 60 947-4-1. DIN VDE 0660 (part 102)
Terminal capacity
Type of terminal
N.m
Tightening torque
lb.in
Type of screws
Dimensions
Width (mm)
Height (mm)
Depth (mm)
MPW25
32A
3
13 x Iemax.
690V 1)
50/60Hz
690V
6kV
A
AC-3
Yes
Yes
Yes
Yes
10
15
2000
IP20
100,000
100,000
MPW65
65A
3
13 x Iemax.
690V
50/60Hz
690V
6kV
A
AC-3
Yes
Yes
Yes
Yes
10
15
2000
IP20
50,000
25,000
MPW100
100A
3
13 x Iemax.
690V
50/60Hz
1000V
8kV
A
AC-3
Yes
Yes
Yes
Yes
10
25
2000
IP20
50,000
25,000
-50...+80ºC
-20...+70ºC
-20...+60ºC
15
-50...+80ºC
-20...+70ºC
-20...+60ºC
15
-50...+80ºC
-20...+60ºC
-20...+60ºC
25
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Flat
2...2.5
18...22
Philips (Nº2)
Box
4...6
35...55
Allen (4mm)
Box
4...6
35...53
Allen (4mm)
45
97
98
54
125
157
70
165
171
Altitude Correction Factor
Altitude
(above sea level) - h
Rated operational voltage Ue
Current correction factor Iu
h ≤ 2000 m
690 V
1 x Iu
2000 < h ≤ 3000 m
550 V
0,96 x Iu
3000 < h ≤ 4000 m
480 V
0,93 x Iu
4000 < h ≤ 5000 m
420 V
0,90 x Iu
The MPW motor protective circuit breakers do not undergo any
change to their specified performance when applied at an altitude of
up to 2000 meters above sea level.
However, as the altitude increases, the atmospheric properties vary
in terms of dielectric rigidness and pressure.
Therefore, current and voltage correction factors must be applied for
altitudes exceeding 2000 meters, as shown in the table on the left:
Notes: 1) 500V with plastic box;
2) On request: 0 to 400Hz
3) Reduce current for temperatures exceeding +60°C (87% to 70°C)
Industrial Control Products
4.35
www.pamensky.com
102
MPW Manual Motor Protector - Technical Data
Auxiliary Contact Block - ACB - MPW25 & MPW65
Part Number
ACBF-11
ACBS-11. ACBS-20. ACBS-02. TSB
For use with
MPW16/16i. MPW25/25i/25t. MPW65/65i
Utilization Category
24 VAC
220-230 VAC
24 VAC
230 VAC
400 VAC
AC-15
2A
0.5 A
6A
6A
3A
1A
AC-12
2.5 A
2.5 A
10 A
10 A
10 A
10 A
DC-13
690 VAC
24 VDC
48 VDC
60 VDC
24 VDC
110 VDC
220 VDC
440 VDC
1A
0.3 A
0.15 A
2A
0.5 A
0.25 A
0.1 A
Type of terminal
Flat
Type of screw
Philips (Nº2)
Tightening torque
0.8…1.2 N.m (7…10 lb.in)
Rigid cable
1 or 2 x (0.5...1.5 mm2). 1 or 2 x (0.75…2.5 mm2). 2 x (18…14 AWG)
Flexible cable
Backup fuses gL/gG
10 A
Auxiliary Contact Block - ACB - MPW100
Part Number
ACBF-11 MPW100
ACBS-11/ACBS-20/ACBS-02/TSB AT-11 MPW100
For use with
MPW100
Utilization Category
AC-15
DC-13
240 VAC
24 VAC
3A
6A
4A
24 VDC
220VDC
2A
0.25 A
24 VDC
220VDC
1A
0.1 A
Type of screw
Philips (Nº2)
Tightening torque
0.8…1.2 N.m (7…10 lb.in)
1 (0.5…2.5mm2 / 20…14 AWG)
Rigid cable
Flexible cable
240 VAC
1 or 2 x (0.5…2.5mm2 / 20…14 AWG)
1(0.5...4mm2 / 20...10 AWG) or 2(0.75...2.5mm2 / 18...14 AWG)
Back-up fuses gL/gG
16 A
Undervoltage Release - URMP
Part Number
For use with
URMP
URMP V_ _ MPW100
MPW16/16i. MPW25/25i/25t. MPW65/65i
MPW100
Operating voltage
(Enables cir. breaker switch ON)
Non-operating voltage
(guarantees circuit breaker switch OFF)
0.85...1.1xUs
0.7...0.35xUs
Energization Consumption
20.2 VA / 13 W
Consumption
7.2 VA / 2.4 W
8.5 VA / 6 W
3 VA / 1.2 W
Max. opening time
20 ms
Type of terminal
Flat
Type of screws
Philips (Nº2)
Tightening torque
Rigid cable
Flexible cable
0.8…1.2 N.m (7…10 lb.in)
1 or 2 x (0.5...2.5 mm2 / 20...14 AWG)
1 or 2 x (0.5...1.5 mm2). 1 or 2 x (0.75…2.5 mm2).
2 x (18…14 AWG)
Back-up fuses gL/gG
1 (0.5...4 mm2 / 20...10 AWG) or 2 x (0.75...2.5 mm2 / 18...14 AWG)
10 A
Shunt Release - SRMP
Part Number
For use with
SRMP
SRMP-K_ _ MPW100
MPW16/16i. MPW25/25i/25t. MPW65/65i
MPW100
Operating Voltage
(guarantee circuit breaker switch OFF)
Consumption - Energization
Maximum opening time
0.7...1.1xUs
20.2 VA / 13 W
8.5 VA / 6 W
20 ms
Type of terminal
Flat
Type of screw
Tightening torque
Rigid cable
Flexible cable
Back-up fuses gL/gG
4.36
Philips (Nº2)
0.8…1.2 N.m (7…10 lb.in)
1 ou 2 x (0.5...2.5 mm2 / 20...14 AWG)
1 or 2 x (0.5...1.5 mm2). 1 or 2 x (0.75…2.5 mm2)
2 x (18…14 AWG)
1 (0.5...4 mm2 / 20...10 AWG) or 2 x (0.75...2.5 mm2 / 18...14 AWG)
10 A
Industrial Control Products
102
www.pamensky.com
Pushbuttons and Pilot Lights
WEG has used its leading-edge technology & development capability to design the CSW
series of pushbuttons, pilot lights, selector switches and accessories. These user friendly and
durable Ø22mm pilot devices are used in many industrial applications and environments.
Besides the brightness, the BIDL blocks have many other valuable characteristics, such as:
• Long life expectancy
• Great performance on shock and vibration applications
• Extremely low power consumption and thermal dissipation
• High luminosity and color definition (independant of the lens)
Fast and easy assembling system
The Mounting of the contact blocks to the operator (pushbutton, selector switch or indicator)
is done via a snap on flange which ensures a fast tight fit. This system can also be removed
quickly, without tools. Each block can be mounted or removed individually: to assemble,
just snap the components together and a common screwdriver is all that is necessary for
disassembly. The ergonomic design of the new locking ring allows hand tightening, without
the need for a screwdriver.
Contact blocks – safety and reliability
High efficiency self-cleaning contact blocks; Pure Silver Contacts (Ag100), ensures maximum
reliability in every condition even at low energy levels (5mA/12V). NC Contacts with “Positive
Break” system, ensures circuit interruption.
Industrial Control Products
4.37
www.pamensky.com
102
Pushbuttons and Pilot Lights - Table of Products
Flush
4.38
Color
White
Part Number
CSW-BF0
List Price
$6.80
Red
CSW-BF1
6.80
Green
CSW-BF2
6.80
Yellow
CSW-BF3
6.80
Blue
CSW-BF4
6.80
Black
CSW-BF5
6.80
Double
Color
N/A
Part Number
CSW-BD
List Price
$14.30
Illuminated Flush
Color
White
Part Number
CSW-BFI0
List Price
$11.40
Red
CSW-BFI1
11.40
Green
CSW-BFI2
11.40
Yellow
CSW-BFI3
11.40
Blue
CSW-BFI4
11.40
Emergency Stop - Twist Release
Color
Red
Part Number
CSW-BEG
List Price
$15.10
Pilot Lights
Color
White
Part Number
CSW-SD0
List Price
$10.10
Red
CSW-SD1
10.10
Green
CSW-SD2
10.10
Yellow
CSW-SD3
10.10
Blue
CSW-SD4
10.10
Industrial Control Products
102
www.pamensky.com
Pushbuttons and Pilot Lights - Table of Products
KNOB
with KEY(1)
LEVER
ILLUMINATED
substitute # for colour code
(see right)
Part Number
List Price
Colour
Code
Clear/White
0
Red
1
Green
2
Yellow
3
Blue
4
POSITION
DIAGRAM
Part Number
List Price
Part Number
List Price
Part Number
List Price
CSW-CK2F45
$16
CSW-CA2F45
$17
CSW-CY2F45
$45
CSW-CK2R45
18
CSW-CA2R45
19
CSW-CK2F90
16
CSW-CA2F90
17
CSW-CK2R90
18
CSW-CA2R90
19
CSW-CK3F45
16
CSW-CA3F45
17
CSW-CK3R45
18
CSW-CA3R45
19
3
CSW-CK3RE45
18
CSW-CA3RE45
19
3
CSW-CK3RD45
18
CSW-CA3RD45
19
3
1
1
CSW-CKI2F90*
2
$10
2
CSW-CY3F45
45
CSW-CKI3F45*
3
10
(1) Key is released in any position
Substitute CY for CYD for key release on the right only
Substitute CY for CYE for key release on the left only
Substitute CY for CYC for key release in the center only
DIAGRAM 1
DIAGRAM 2
Contact Status
Handle
Position
2
3
Contact Status
Handle
Position
Contact Status
Handle
Position
1
DIAGRAM 3
2
2
3
3
1
1
0
0
I
-
I
I
II
II
Contacts in rest position
Contacts actuated
Mounting position for the LED or lamp blocks only
Industrial Control Products
4.39
www.pamensky.com
102
Pushbuttons and Pilot Lights - Assembled Units
Pushbuttons
Description
Stop pushbutton, 1NC, red
Start pushbutton, 1NO, green
pushbutton, 1NO, black
Emergency stop pushbutton w/1NC twist release
Double pushbutton Start/Stop 1NO/1NC
Parts
CSW-BF1, CSW-BC01
CSW-BF2, CSW-BC10
CSW-BF5, CSW-BC10
CSW-BEG-01, CSW-BC01
CSW-BD, CSW-BC11
Part Number
CSW-BF1-01
CSW-BF2-10
CSW-BF5-10
CSW-BEG-01
CSW-BD-11
List Price
$12.70
12.70
12.70
22.00
26.00
Parts
CSW-CK2F45, CSW-BC10
CSW-CK3F45, CSW-BC20
Part Number
CSW-CK2F45-10
CSW-CK3F45-20
List Price
$23.00
29.00
Parts
CSW-SD1, BIDL110-130VAC1
CSW-SD2, BIDL110-130VAC2
Part Number
CSW-SD1-D61
CSW-SD2-D61
List Price
$30.00
30.00
Parts
CSW-BFI1, CSW-BC01, BIDL110-130VAC1
CSW-BFI2, CSW-BC10, BIDL110-130VAC2
Part Number
CSW-BFI1-01
CSW-BFI2-10
List Price
$37.00
37.00
Selector Switches
Description
2 position selector switch with 1 NO
3 position selector switch with 2 NO
Pilot Lights
Description
Pilot light colour red, with LED 110 V
Pilot light colour green, with LED 110 V
Illuminated Pushbutton
Description
Illuminated pushbutton LED red, 1 NC, 110 V
Illuminated pushbutton LED green, 1 NO, 110 V
4.40
Industrial Control Products
102
www.pamensky.com
Pushbuttons and Pilot Lights - Accessories
Single Contact Block
Double Contact Block
1NC
1NO-1NC
Part Number: CSW-BC01
Part Number: CSW-BC11
1NO
2NO
Part Number: CSW-BC10
Part Number: CSW-BC20
List Price: $5.10
List Price: $9.20
Push-on / Push-off Block
Part Number: CSW-BR
Full Voltage AC/DC Lamp Block
Part Number: CSW-BR
- Device for flush, extended and mushroom pushbuttons
List Price: $8.50
List Price: $8.50
Note: Use only with single contact blocks. 1NO-contacts must be CSW-BCA10 (early make) type.
Note: For BA9S lamps
380V / 2W max.
LED Block
Part Numbers:
24Vac/Vdc: BIDL24VAC/VDC#
Colour
Code
Clear/White
0
Red
1
Green
2
Yellow
3
Blue
4
110-130Vac: BIDL110-130VAC#
220-240Vac: BIDL220-240VAC#
List Price: $17.60
Note: Replace # with desired colour code
(see right)
Industrial Control Products
4.41
www.pamensky.com
102
Pushbuttons and Pilot Lights - Technical Data
Standards
Rated insulation voltage
Degree of protection
Degree of protection - Terminals
UL ratings
Electrical ratings
Conventional thermal current
Utilization category AC-15
Utilization category DC-13
UL / CSA ratings
Contacts resistance
Short circuit protection
Electrical shock protection
Rated impulse voltage
Terminal capacity
Temperature range
Shock resitance
Vibration resistance
IEC/EN 6068-2-6
Mechanical endurance
Pushbuttons
Selector Switches
Emergency-Stop
Maximum number of contacts
Pushbuttons (BF)
4.42
IEC/EN 60947-5-1, VDE 0660, NFC63140, UL 508, UL 50, CENELEC EN50007
660 Vac / Vdc
IP66 (IEC/EN 60529)
IP2X (IEC/EN 60529)
Type 1, 2, 3, 3R, 35, 4, 4X, 5, 12, 12K e 13
Ith = 10A (IEC 947-5-1)
(V)
24
48
60
110
230
400
500
600
(V)
24
48
60
110
230
400
600
(A)
10
10
10
6
3
2
1.5
1.2
(A)
2.5
1.4
1
0.55
0.27
0.2
0.1
AC / Heavy Duty (A600)
DC / Standard Duty (Q600)
≤ 25mΩ (IEC/EN 60255)
16A gL/gG fuse or MPW25-10
Class II
2.5 kV (IEC 947-5-1)
1 or 2 x (0.5 - 2.5mm2) / 1 or 2 x 14-20AWG
-25ºC to 70ºC (-13ºF to 158ºF)
No damage or disassembling at 100g for all devices according to MIL 202 Bmethod 202A ≤ ½ sinusoid 11ms
16g with frequency range from 40 to 500Hz
and max shifting 0.75mm (peak-to-peak)
3 x 106
1 x 106
3 x 105
AF3 Flange AF5 Flange
Max. 6 Max 10
Industrial Control Products
101
www.pamensky.com
Variable Frequency Drive Sizing Guide
CFW 08 Plus
Motor
HP
1
1.5
2
3
5
7.5
10
15
20
Notes:
CFW-08 Plus Variable Frequency Drive Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
143T
143T
145T
182T
143T
145T
182T
184T
145T
145T
184T
213T
W182T
W182T
213T
215T
184T
184T
215T
254T
213T
213T
254T
256T
215T
215T
256T
284T
254T
254T
284T
286T
256T
256T
286T
324T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
CFW080040B2024EON1A1
CFW080040B2024EON1A1
CFW080040B2024EON1A1
CFW080040B2024EON1A1
CFW080073B2024EON1A1
CFW080073B2024EON1A1
CFW080073B2024EON1A1
CFW080073B2024EON1A1
CFW080073B2024EON1A1
CFW080073B2024EON1A1
CFW080073B2024EON1A1
CFW080073B2024EON1A1
CFW080100B2024EON1A1
CFW080100B2024EON1A1
CFW080100B2024EON1A1
CFW080100B2024EON1A1
CFW080160T2024EON1A1
CFW080160T2024EON1A1
CFW080160T2024EON1A1
CFW080160T2024EON1A1
CFW080220T2024EON1A1
CFW080220T2024EON1A1
CFW080220T2024EON1A1
CFW080220T2024EON1A1
CFW080280T2024EON1A1
CFW080280T2024EON1A1
CFW080280T2024EON1A1
CFW080280T2024EON1A1
CFW080026T3848EON1A1
CFW080026T3848EON1A1
CFW080026T3848EON1A1
CFW080026T3848EON1A1
CFW080040T3848EON1A1
CFW080040T3848EON1A1
CFW080040T3848EON1A1
CFW080040T3848EON1A1
CFW080043T3848EON1A1
CFW080043T3848EON1A1
CFW080043T3848EON1A1
CFW080043T3848EON1A1
CFW080065T3848EON1A1
CFW080065T3848EON1A1
CFW080065T3848EON1A1
CFW080065T3848EON1A1
CFW080100T3848EON1A1
CFW080100T3848EON1A1
CFW080100T3848EON1A1
CFW080100T3848EON1A1
CFW080130T3848EON1A1
CFW080130T3848EON1A1
CFW080130T3848EON1A1
CFW080130T3848EON1A1
CFW080160T3848EON1A1
CFW080160T3848EON1A1
CFW080160T3848EON1A1
CFW080160T3848EON1A1
CFW080240T3848EON1A1
CFW080240T3848EON1A1
CFW080240T3848EON1A1
CFW080240T3848EON1A1
CFW080300T3848EON1A1
CFW080300T3848EON1A1
CFW080300T3848EON1A1
CFW080300T3848EON1A1
CFW080017T5060EON1A1
CFW080017T5060EON1A1
CFW080017T5060EON1A1
CFW080017T5060EON1A1
CFW080030T5060EON1A1
CFW080030T5060EON1A1
CFW080030T5060EON1A1
CFW080030T5060EON1A1
CFW080030T5060EON1A1
CFW080030T5060EON1A1
CFW080030T5060EON1A1
CFW080030T5060EON1A1
CFW080042T5060EON1A1
CFW080042T5060EON1A1
CFW080042T5060EON1A1
CFW080042T5060EON1A1
CFW080070T5060EON1A1
CFW080070T5060EON1A1
CFW080070T5060EON1A1
CFW080070T5060EON1A1
CFW080100T5060EON1A1
CFW080100T5060EON1A1
CFW080100T5060EON1A1
CFW080100T5060EON1A1
CFW080120T5060EON1A1
CFW080120T5060EON1A1
CFW080120T5060EON1A1
CFW080120T5060EON1A1
This chart is designed as a guide only. For specific sizing please contact V.J. Pamensky Canada Inc.
Reference
5.1
www.pamensky.com
101
Variable Frequency Drive Sizing Guide
CFW 09
Motor
HP
1
1.5
2
3
5
7.5
10
15
20
25
30
40
50
5.2
CFW-09 Variable Frequency Drive Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
143T
143T
145T
182T
143T
145T
182T
184T
145T
145T
184T
213T
W182T
W182T
213T
215T
184T
184T
215T
254T
213T
213T
254T
256T
215T
215T
256T
284T
254T
254T
284T
286T
256T
256T
286T
324T
284TS
284T
324T
326T
286TS
286T
326T
364/5T
324TS
324T
364/5T
364/5T
326TS
326T
364/5T
404/5T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
CFW090006T2223ESZ
CFW090006T2223ESZ
CFW090006T2223ESZ
CFW090006T2223ESZ
CFW090006T2223ESZ
CFW090006T2223ESZ
CFW090006T2223ESZ
CFW090006T2223ESZ
CFW090007T2223ESZ
CFW090007T2223ESZ
CFW090007T2223ESZ
CFW090007T2223ESZ
CFW090010T2223ESZ
CFW090010T2223ESZ
CFW090010T2223ESZ
CFW090010T2223ESZ
CFW090016T2223ESZ
CFW090016T2223ESZ
CFW090016T2223ESZ
CFW090016T2223ESZ
CFW090024T2223ESZ
CFW090024T2223ESZ
CFW090024T2223ESZ
CFW090024T2223ESZ
CFW090028T2223ESZ
CFW090028T2223ESZ
CFW090028T2223ESZ
CFW090028T2223ESZ
CFW090045T2223ESZ
CFW090045T2223ESZ
CFW090045T2223ESZ
CFW090045T2223ESZ
CFW090054T2223ESZ
CFW090054T2223ESZ
CFW090054T2223ESZ
CFW090054T2223ESZ
CFW090070T2223ESZ
CFW090070T2223ESZ
CFW090070T2223ESZ
CFW090070T2223ESZ
CFW090086T2223ESZ
CFW090086T2223ESZ
CFW090086T2223ESZ
CFW090086T2223ESZ
CFW090105T2223ESZ
CFW090105T2223ESZ
CFW090105T2223ESZ
CFW090105T2223ESZ
CFW090130T2223ESZ
CFW090130T2223ESZ
CFW090130T2223ESZ
CFW090130T2223ESZ
CFW090003T3848ESZ
CFW090003T3848ESZ
CFW090003T3848ESZ
CFW090003T3848ESZ
CFW090003T3848ESZ
CFW090003T3848ESZ
CFW090003T3848ESZ
CFW090003T3848ESZ
CFW090004T3848ESZ
CFW090004T3848ESZ
CFW090004T3848ESZ
CFW090004T3848ESZ
CFW090005T3848ESZ
CFW090005T3848ESZ
CFW090005T3848ESZ
CFW090005T3848ESZ
CFW090009T3848ESZ
CFW090009T3848ESZ
CFW090009T3848ESZ
CFW090009T3848ESZ
CFW090013T3848ESZ
CFW090013T3848ESZ
CFW090013T3848ESZ
CFW090013T3848ESZ
CFW090016T3848ESZ
CFW090016T3848ESZ
CFW090016T3848ESZ
CFW090016T3848ESZ
CFW090024T3848ESZ
CFW090024T3848ESZ
CFW090024T3848ESZ
CFW090024T3848ESZ
CFW090030T3848ESZ
CFW090030T3848ESZ
CFW090030T3848ESZ
CFW090030T3848ESZ
CFW090038T3848ESZ
CFW090038T3848ESZ
CFW090038T3848ESZ
CFW090038T3848ESZ
CFW090045T3848ESZ
CFW090045T3848ESZ
CFW090045T3848ESZ
CFW090045T3848ESZ
CFW090060T3848ESZ
CFW090060T3848ESZ
CFW090060T3848ESZ
CFW090060T3848ESZ
CFW090070T3848ESZ
CFW090070T3848ESZ
CFW090070T3848ESZ
CFW090070T3848ESZ
CFW090002T5060ESZ
CFW090002T5060ESZ
CFW090002T5060ESZ
CFW090002T5060ESZ
CFW090002T5060ESZ
CFW090002T5060ESZ
CFW090002T5060ESZ
CFW090002T5060ESZ
CFW090002T5060ESZ
CFW090002T5060ESZ
CFW090002T5060ESZ
CFW090002T5060ESZ
CFW090004T5060ESZ
CFW090004T5060ESZ
CFW090004T5060ESZ
CFW090004T5060ESZ
CFW090007T5060ESZ
CFW090007T5060ESZ
CFW090007T5060ESZ
CFW090007T5060ESZ
CFW090010T5060ESZ
CFW090010T5060ESZ
CFW090010T5060ESZ
CFW090010T5060ESZ
CFW090012T5060ESZ
CFW090012T5060ESZ
CFW090012T5060ESZ
CFW090012T5060ESZ
CFW090014T5060ESZ
CFW090014T5060ESZ
CFW090014T5060ESZ
CFW090014T5060ESZ
CFW090022T5060ESZ
CFW090022T5060ESZ
CFW090022T5060ESZ
CFW090022T5060ESZ
CFW090027T5060ESZ
CFW090027T5060ESZ
CFW090027T5060ESZ
CFW090027T5060ESZ
CFW090032T5060ESZ
CFW090032T5060ESZ
CFW090032T5060ESZ
CFW090032T5060ESZ
CFW090044T5060ESZ
CFW090044T5060ESZ
CFW090044T5060ESZ
CFW090044T5060ESZ
CFW090053T5060ESZ
CFW090053T5060ESZ
CFW090053T5060ESZ
CFW090053T5060ESZ
Reference
101
www.pamensky.com
Variable Frequency Drive Sizing Guide
CFW 09
Motor
HP
60
75
100
125
150
200
250
300
Notes:
CFW-09 Variable Frequency Drive Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
364/5TS
364/5T
404/5T
404/5T
364/5TS
364/5T
404/5T
444/5T
404/5TS
404/5T
444/5T
444/5T
444/5TS
444/5T
444/5T
504/5T
445TS
445T
447T
504/5T
447TS
447T
447T
449T
447TS
447T
586/7T
586/7T
586/7TS
586/7T
586/7T
586/7T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
CFW090180T2223ESZ
CFW090180T2223ESZ
CFW090180T2223ESZ
CFW090180T2223ESZ
CFW090240T2223ESZ
CFW090240T2223ESZ
CFW090240T2223ESZ
CFW090240T2223ESZ
CFW090086T3848ESZ
CFW090086T3848ESZ
CFW090086T3848ESZ
CFW090086T3848ESZ
CFW090105T3848ESZ
CFW090105T3848ESZ
CFW090105T3848ESZ
CFW090105T3848ESZ
CFW090142T3848ESZ
CFW090142T3848ESZ
CFW090142T3848ESZ
CFW090142T3848ESZ
CFW090180T3848ESZ
CFW090180T3848ESZ
CFW090180T3848ESZ
CFW090180T3848ESZ
CFW090180T3848ESZ
CFW090180T3848ESZ
CFW090180T3848ESZ
CFW090180T3848ESZ
CFW090240T3848ESZ
CFW090240T3848ESZ
CFW090240T3848ESZ
CFW090240T3848ESZ
CFW090312T3848ESZ
CFW090312T3848ESZ
CFW090312T3848ESZ
CFW090312T3848ESZ
CFW090361T3848ESZ
CFW090361T3848ESZ
CFW090361T3848ESZ
CFW090361T3848ESZ
CFW090063T5060ESZ
CFW090063T5060ESZ
CFW090063T5060ESZ
CFW090063T5060ESZ
CFW090079T5060ESZ
CFW090079T5060ESZ
CFW090079T5060ESZ
CFW090079T5060ESZ
CFW090107T5069ESZ
CFW090107T5069ESZ
CFW090107T5069ESZ
CFW090107T5069ESZ
CFW090147T5069ESZ
CFW090147T5069ESZ
CFW090147T5069ESZ
CFW090147T5069ESZ
CFW090147T5069ESZ
CFW090147T5069ESZ
CFW090147T5069ESZ
CFW090147T5069ESZ
CFW090211T5069ESZ
CFW090211T5069ESZ
CFW090211T5069ESZ
CFW090211T5069ESZ
CFW090247T5069ESZ
CFW090247T5069ESZ
CFW090247T5069ESZ
CFW090247T5069ESZ
CFW090315T5069ESZ
CFW090315T5069ESZ
CFW090315T5069ESZ
CFW090315T5069ESZ
This chart is designed as a guide only. For specific sizing or sizing for larger motors please contact V.J. Pamensky Canada Inc.
Reference
5.3
www.pamensky.com
101
Variable Frequency Drive Sizing Guide
CFW 11
Motor
HP
1
1.5
2
3
5
7.5
10
15
20
25
30
40
50
5.4
CFW-11 Variable Frequency Drive Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
143T
143T
145T
182T
143T
145T
182T
184T
145T
145T
184T
213T
W182T
W182T
213T
215T
184T
184T
215T
254T
213T
213T
254T
256T
215T
215T
256T
284T
254T
254T
284T
286T
256T
256T
286T
324T
284TS
284T
324T
326T
286TS
286T
326T
364/5T
324TS
324T
364/5T
364/5T
326TS
326T
364/5T
404/5T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
CFW110006B2ON1Z
CFW110006B2ON1Z
CFW110006B2ON1Z
CFW110006B2ON1Z
CFW110006B2ON1Z
CFW110006B2ON1Z
CFW110006B2ON1Z
CFW110006B2ON1Z
CFW110007B2ON1Z
CFW110007B2ON1Z
CFW110007B2ON1Z
CFW110007B2ON1Z
CFW110010T2ON1Z
CFW110010T2ON1Z
CFW110010T2ON1Z
CFW110010T2ON1Z
CFW110024T2ON1Z
CFW110024T2ON1Z
CFW110024T2ON1Z
CFW110024T2ON1Z
CFW110028T2ON1Z
CFW110028T2ON1Z
CFW110028T2ON1Z
CFW110028T2ON1Z
CFW110033T2ON1Z
CFW110033T2ON1Z
CFW110033T2ON1Z
CFW110033T2ON1Z
CFW110054T2ON1Z
CFW110054T2ON1Z
CFW110054T2ON1Z
CFW110054T2ON1Z
CFW110070T2ON1Z
CFW110070T2ON1Z
CFW110070T2ON1Z
CFW110070T2ON1Z
CFW110086T2SZ
CFW110086T2SZ
CFW110086T2SZ
CFW110086T2SZ
CFW110105T2SZ
CFW110105T2SZ
CFW110105T2SZ
CFW110105T2SZ
CFW110142T2SZ
CFW110142T2SZ
CFW110142T2SZ
CFW110142T2SZ
CFW110180T2ON1Z
CFW110180T2ON1Z
CFW110180T2ON1Z
CFW110180T2ON1Z
CFW110003T40N1Z
CFW110003T40N1Z
CFW110003T40N1Z
CFW110003T40N1Z
CFW110003T40N1Z
CFW110003T40N1Z
CFW110003T40N1Z
CFW110003T40N1Z
CFW110003T40N1Z
CFW110003T40N1Z
CFW110003T40N1Z
CFW110003T40N1Z
CFW110005T40N1Z
CFW110005T40N1Z
CFW110005T40N1Z
CFW110005T40N1Z
CFW110010T40N1Z
CFW110010T40N1Z
CFW110010T40N1Z
CFW110010T40N1Z
CFW110017T40N1Z
CFW110017T40N1Z
CFW110017T40N1Z
CFW110017T40N1Z
CFW110024T40N1Z
CFW110024T40N1Z
CFW110024T40N1Z
CFW110024T40N1Z
CFW110031T40N1Z
CFW110031T40N1Z
CFW110031T40N1Z
CFW110031T40N1Z
CFW110038T40N1Z
CFW110038T40N1Z
CFW110038T40N1Z
CFW110038T40N1Z
CFW110045T40N1Z
CFW110045T40N1Z
CFW110045T40N1Z
CFW110045T40N1Z
CFW110058T40N1Z
CFW110058T40N1Z
CFW110058T40N1Z
CFW110058T40N1Z
CFW110070T4SZ
CFW110070T4SZ
CFW110070T4SZ
CFW110070T4SZ
CFW110088T4SZ
CFW110088T4SZ
CFW110088T4SZ
CFW110088T4SZ
CFW110002T5ON1NFZ
CFW110002T5ON1NFZ
CFW110002T5ON1NFZ
CFW110002T5ON1NFZ
CFW110002T5ON1NFZ
CFW110002T5ON1NFZ
CFW110002T5ON1NFZ
CFW110002T5ON1NFZ
CFW110002T5ON1NFZ
CFW110002T5ON1NFZ
CFW110002T5ON1NFZ
CFW110002T5ON1NFZ
CFW110004T5ON1NFZ
CFW110004T5ON1NFZ
CFW110004T5ON1NFZ
CFW110004T5ON1NFZ
CFW110007T5ON1NFZ
CFW110007T5ON1NFZ
CFW110007T5ON1NFZ
CFW110007T5ON1NFZ
CFW110010T5ON1NFZ
CFW110010T5ON1NFZ
CFW110010T5ON1NFZ
CFW110010T5ON1NFZ
CFW110012T5ON1NFZ
CFW110012T5ON1NFZ
CFW110012T5ON1NFZ
CFW110012T5ON1NFZ
CFW110017T5ON1NFZ
CFW110017T5ON1NFZ
CFW110017T5ON1NFZ
CFW110017T5ON1NFZ
CFW110022T6SZ
CFW110022T6SZ
CFW110022T6SZ
CFW110022T6SZ
CFW110027T6SZ
CFW110027T6SZ
CFW110027T6SZ
CFW110027T6SZ
CFW110032T6SZ
CFW110032T6SZ
CFW110032T6SZ
CFW110032T6SZ
CFW110044T6SZ
CFW110044T6SZ
CFW110044T6SZ
CFW110044T6SZ
CFW110053T6ON1NBYZ
CFW110053T6ON1NBYZ
CFW110053T6ON1NBYZ
CFW110053T6ON1NBYZ
Reference
101
www.pamensky.com
Variable Frequency Drive Sizing Guide
CFW 11
Motor
HP
60
75
100
125
150
200
250
300
Notes:
CFW-11 Variable Frequency Drive Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
364/5TS
364/5T
404/5T
404/5T
364/5TS
364/5T
404/5T
444/5T
404/5TS
404/5T
444/5T
444/5T
444/5TS
444/5T
444/5T
504/5T
445TS
445T
447T
504/5T
447TS
447T
447T
449T
447TS
447T
586/7T
586/7T
586/7TS
586/7T
586/7T
586/7T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
CFW110211T2ON1Z
CFW110211T2ON1Z
CFW110211T2ON1Z
CFW110211T2ON1Z
CFW110105T40N1Z
CFW110105T40N1Z
CFW110105T40N1Z
CFW110105T40N1Z
CFW110142T40N1Z
CFW110142T40N1Z
CFW110142T40N1Z
CFW110142T40N1Z
CFW110180T40N1Z
CFW110180T40N1Z
CFW110180T40N1Z
CFW110180T40N1Z
CFW110211T40N1Z
CFW110211T40N1Z
CFW110211T40N1Z
CFW110211T40N1Z
CFW110242T4SZ
CFW110242T4SZ
CFW110242T4SZ
CFW110242T4SZ
CFW110312T4SZ
CFW110312T4SZ
CFW110312T4SZ
CFW110312T4SZ
CFW110370T4SZ
CFW110370T4SZ
CFW110370T4SZ
CFW110370T4SZ
CFW110477T4SZ
CFW110477T4SZ
CFW110477T4SZ
CFW110477T4SZ
CFW110063T6ON1NBYZ
CFW110063T6ON1NBYZ
CFW110063T6ON1NBYZ
CFW110063T6ON1NBYZ
CFW110080T6ON1NBYZ
CFW110080T6ON1NBYZ
CFW110080T6ON1NBYZ
CFW110080T6ON1NBYZ
CFW110107T6ON1NBYZ
CFW110107T6ON1NBYZ
CFW110107T6ON1NBYZ
CFW110107T6ON1NBYZ
CFW110125T6ON1NBYZ
CFW110125T6ON1NBYZ
CFW110125T6ON1NBYZ
CFW110125T6ON1NBYZ
CFW110150T6ON1NBYZ
CFW110150T6ON1NBYZ
CFW110150T6ON1NBYZ
CFW110150T6ON1NBYZ
CFW110216T6ONBYZ
CFW110216T6ONBYZ
CFW110216T6ONBYZ
CFW110216T6ONBYZ
CFW110289T6ONBYZ
CFW110289T6ONBYZ
CFW110289T6ONBYZ
CFW110289T6ONBYZ
CFW110315T6ONBYZ
CFW110315T6ONBYZ
CFW110315T6ONBYZ
CFW110315T6ONBYZ
This chart uses Normal Duty (ND) ratings for sizing. See CFW-11 product table for more information.
This chart is designed as a guide only. For specific sizing or sizing for larger motors please contact V.J. Pamensky Canada Inc.
Reference
5.5
www.pamensky.com
101
Variable Frequency Drive Sizing Guide
CFW 700
Motor
HP
1
1.5
2
3
5
7.5
10
15
20
25
30
40
50
5.6
CFW-700 Variable Frequency Drive Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
143T
143T
145T
182T
143T
145T
182T
184T
145T
145T
184T
213T
W182T
W182T
213T
215T
184T
184T
215T
254T
213T
213T
254T
256T
215T
215T
256T
284T
254T
254T
284T
286T
256T
256T
286T
324T
284TS
284T
324T
326T
286TS
286T
326T
364/5T
324TS
324T
364/5T
364/5T
326TS
326T
364/5T
404/5T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
CFW700A06POB2DBN1
CFW700A06POB2DBN1
CFW700A06POB2DBN1
CFW700A06POB2DBN1
CFW700A06POB2DBN1
CFW700A06POB2DBN1
CFW700A06POB2DBN1
CFW700A06POB2DBN1
CFW700A07POB2DBN1
CFW700A07POB2DBN1
CFW700A07POB2DBN1
CFW700A07POB2DBN1
CFW700A10POT2DBN1
CFW700A10POT2DBN1
CFW700A10POT2DBN1
CFW700A10POT2DBN1
CFW700B24POT2DBN1
CFW700B24POT2DBN1
CFW700B24POT2DBN1
CFW700B24POT2DBN1
CFW700B28POT2DBN1
CFW700B28POT2DBN1
CFW700B28POT2DBN1
CFW700B28POT2DBN1
CFW700B33POT2DBN1
CFW700B33POT2DBN1
CFW700B33POT2DBN1
CFW700B33POT2DBN1
CFW700C54POT2DBN1
CFW700C54POT2DBN1
CFW700C54POT2DBN1
CFW700C54POT2DBN1
CFW700C70POT2DBN1
CFW700C70POT2DBN1
CFW700C70POT2DBN1
CFW700C70POT2DBN1
CFW700D86POT2DBN1
CFW700D86POT2DBN1
CFW700D86POT2DBN1
CFW700D86POT2DBN1
CFW700D0105T2DBN1
CFW700D0105T2DBN1
CFW700D0105T2DBN1
CFW700D0105T2DBN1
CFW700E0142T2NBN1C3
CFW700E0142T2NBN1C3
CFW700E0142T2NBN1C3
CFW700E0142T2NBN1C3
CFW700E0180T2NBN1C3
CFW700E0180T2NBN1C3
CFW700E0180T2NBN1C3
CFW700E0180T2NBN1C3
CFW700A03P6T4DBN1
CFW700A03P6T4DBN1
CFW700A03P6T4DBN1
CFW700A03P6T4DBN1
CFW700A03P6T4DBN1
CFW700A03P6T4DBN1
CFW700A03P6T4DBN1
CFW700A03P6T4DBN1
CFW700A03P6T4DBN1
CFW700A03P6T4DBN1
CFW700A03P6T4DBN1
CFW700A03P6T4DBN1
CFW700A05P0T4DBN1
CFW700A05P0T4DBN1
CFW700A05P0T4DBN1
CFW700A05P0T4DBN1
CFW700A10P0T4DBN1
CFW700A10P0T4DBN1
CFW700A10P0T4DBN1
CFW700A10P0T4DBN1
CFW700B17P0T4DBN1
CFW700B17P0T4DBN1
CFW700B17P0T4DBN1
CFW700B17P0T4DBN1
CFW700B24P0T4DBN1
CFW700B24P0T4DBN1
CFW700B24P0T4DBN1
CFW700B24P0T4DBN1
CFW700B31P0T4DBN1
CFW700B31P0T4DBN1
CFW700B31P0T4DBN1
CFW700B31P0T4DBN1
CFW700C38P0T4DBN1
CFW700C38P0T4DBN1
CFW700C38P0T4DBN1
CFW700C38P0T4DBN1
CFW700C45P0T4DBN1
CFW700C45P0T4DBN1
CFW700C45P0T4DBN1
CFW700C45P0T4DBN1
CFW700C58P5T4DBN1
CFW700C58P5T4DBN1
CFW700C58P5T4DBN1
CFW700C58P5T4DBN1
CFW700D70P5T4DBN1
CFW700D70P5T4DBN1
CFW700D70P5T4DBN1
CFW700D70P5T4DBN1
CFW700D88P0T4DBN1
CFW700D88P0T4DBN1
CFW700D88P0T4DBN1
CFW700D88P0T4DBN1
CFW700B02P9T5DBN1
CFW700B02P9T5DBN1
CFW700B02P9T5DBN1
CFW700B02P9T5DBN1
CFW700B02P9T5DBN1
CFW700B02P9T5DBN1
CFW700B02P9T5DBN1
CFW700B02P9T5DBN1
CFW700B02P9T5DBN1
CFW700B02P9T5DBN1
CFW700B02P9T5DBN1
CFW700B02P9T5DBN1
CFW700B04P2T5DBN1
CFW700B04P2T5DBN1
CFW700B04P2T5DBN1
CFW700B04P2T5DBN1
CFW700B07P0T5DBN1
CFW700B07P0T5DBN1
CFW700B07P0T5DBN1
CFW700B07P0T5DBN1
CFW700B10P0T5DBN1
CFW700B10P0T5DBN1
CFW700B10P0T5DBN1
CFW700B10P0T5DBN1
CFW700B12P0T5DBN1
CFW700B12P0T5DBN1
CFW700B12P0T5DBN1
CFW700B12P0T5DBN1
CFW700B17P0T5DBN1
CFW700B17P0T5DBN1
CFW700B17P0T5DBN1
CFW700B17P0T5DBN1
CFW700D22P0T5NBN1
CFW700D22P0T5NBN1
CFW700D22P0T5NBN1
CFW700D22P0T5NBN1
CFW700D27P0T5NBN1
CFW700D27P0T5NBN1
CFW700D27P0T5NBN1
CFW700D27P0T5NBN1
CFW700D32P0T5NBN1
CFW700D32P0T5NBN1
CFW700D32P0T5NBN1
CFW700D32P0T5NBN1
CFW700D44P0T5NBN1
CFW700D44P0T5NBN1
CFW700D44P0T5NBN1
CFW700D44P0T5NBN1
CFW700E53P0T5NBN1C3
CFW700E53P0T5NBN1C3
CFW700E53P0T5NBN1C3
CFW700E53P0T5NBN1C3
Reference
101
www.pamensky.com
Variable Frequency Drive Sizing Guide
CFW 700
Motor
HP
60
75
100
125
150
Notes:
CFW-700 Variable Frequency Drive Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
364/5TS
364/5T
404/5T
404/5T
364/5TS
364/5T
404/5T
444/5T
404/5TS
404/5T
444/5T
444/5T
444/5TS
444/5T
444/5T
504/5T
445TS
445T
447T
504/5T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
CFW700E0211T2NBN1C3
CFW700E0211T2NBN1C3
CFW700E0211T2NBN1C3
CFW700E0211T2NBN1C3
CFW700E0105T4NBN1C3
CFW700E0105T4NBN1C3
CFW700E0105T4NBN1C3
CFW700E0105T4NBN1C3
CFW700E0142T4NBN1C3
CFW700E0142T4NBN1C3
CFW700E0142T4NBN1C3
CFW700E0142T4NBN1C3
CFW700E0180T4NBN1C3
CFW700E0180T4NBN1C3
CFW700E0180T4NBN1C3
CFW700E0180T4NBN1C3
CFW700E0211T4NBN1C3
CFW700E0211T4NBN1C3
CFW700E0211T4NBN1C3
CFW700E0211T4NBN1C3
CFW700E63P0T5NBN1C3
CFW700E63P0T5NBN1C3
CFW700E63P0T5NBN1C3
CFW700E63P0T5NBN1C3
CFW700E80P0T5NBN1C3
CFW700E80P0T5NBN1C3
CFW700E80P0T5NBN1C3
CFW700E80P0T5NBN1C3
CFW700E0107T5NBN1C3
CFW700E0107T5NBN1C3
CFW700E0107T5NBN1C3
CFW700E0107T5NBN1C3
CFW700E0125T5NBN1C3
CFW700E0125T5NBN1C3
CFW700E0125T5NBN1C3
CFW700E0125T5NBN1C3
CFW700E0150T5NBN1C3
CFW700E0150T5NBN1C3
CFW700E0150T5NBN1C3
CFW700E0150T5NBN1C3
This chart uses Normal Duty (ND) ratings for sizing. See CFW-700 product table for more information.
This chart is designed as a guide only. For specific sizing please contact V.J. Pamensky Canada Inc.
Reference
5.7
www.pamensky.com
101
Direct On-Line Starter Sizing Guide
PESW
Motor
HP
1
1.5
2
3
5
7.5
10
15
20
25
30
40
50
5.8
PESW Direct On-Line Starter Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
143T
143T
145T
182T
143T
145T
182T
184T
145T
145T
184T
213T
W182T
W182T
213T
215T
184T
184T
215T
254T
213T
213T
254T
256T
215T
215T
256T
284T
254T
254T
284T
286T
256T
256T
286T
324T
284TS
284T
324T
326T
286TS
286T
326T
364/5T
324TS
324T
364/5T
364/5T
326TS
326T
364/5T
404/5T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
PESW-9V24AX-R26
PESW-9V24AX-R26
PESW-9V24AX-R26
PESW-9V24AX-R26
PESW-9V24AX-R27
PESW-9V24AX-R27
PESW-9V24AX-R27
PESW-9V24AX-R27
PESW-9V24AX-R28
PESW-9V24AX-R28
PESW-9V24AX-R28
PESW-9V24AX-R28
PESW-9V24AX-R29
PESW-9V24AX-R29
PESW-9V24AX-R29
PESW-9V24AX-R29
PESW-18V24AX-R32
PESW-18V24AX-R32
PESW-18V24AX-R32
PESW-18V24AX-R32
PESW-25V24AX-R33
PESW-25V24AX-R33
PESW-25V24AX-R33
PESW-32V24AX-R33
PESW-32V24AX-R34
PESW-32V24AX-R34
PESW-32V24AX-R34
PESW-32V24AX-R34
PESW-40V24AX-R35
PESW-40V24AX-R35
PESW-40V24AX-R35
PESW-50V24AX-R36
PESW-65V24AX-R39
PESW-65V24AX-R39
PESW-65V24AX-R39
PESW-65V24AX-R39
PESW-80V24AX-R41
PESW-80V24AX-R41
PESW-80V24AX-R41
PESW-80V24AX-R41
PESW-95V24AX-R43
PESW-95V24AX-R43
PESW-95V24AX-R43
PESW-95V24AX-R43
PESW-105V24AX-R45
PESW-105V24AX-R45
PESW-105V24AX-R45
PESW-105V24AX-R45
PESW-9V47AX-R24
PESW-9V47AX-R24
PESW-9V47AX-R24
PESW-9V47AX-R24
PESW-9V47AX-R25
PESW-9V47AX-R25
PESW-9V47AX-R25
PESW-9V47AX-R25
PESW-9V47AX-R26
PESW-9V47AX-R26
PESW-9V47AX-R26
PESW-9V47AX-R26
PESW-9V47AX-R27
PESW-9V47AX-R27
PESW-9V47AX-R27
PESW-9V47AX-R27
PESW-9V47AX-R28
PESW-9V47AX-R28
PESW-9V47AX-R28
PESW-9V47AX-R28
PESW-12V47AX-R30
PESW-12V47AX-R30
PESW-12V47AX-R30
PESW-12V47AX-R30
PESW-18V47AX-R32
PESW-18V47AX-R32
PESW-18V47AX-R32
PESW-18V47AX-R32
PESW-25V47AX-R33
PESW-25V47AX-R33
PESW-25V47AX-R33
PESW-32V47AX-R33
PESW-32V47AX-R34
PESW-32V47AX-R34
PESW-32V47AX-R34
PESW-32V47AX-R34
PESW-40V47AX-R35
PESW-40V47AX-R35
PESW-40V47AX-R35
PESW-50V47AX-R36
PESW-50V47AX-R36
PESW-50V47AX-R38
PESW-50V47AX-R38
PESW-50V47AX-R38
PESW-65V47AX-R39
PESW-65V47AX-R39
PESW-65V47AX-R39
PESW-65V47AX-R39
PESW-80V47AX-R41
PESW-80V47AX-R41
PESW-80V47AX-R41
PESW-80V47AX-R41
PESW-9V56AX-R24
PESW-9V56AX-R24
PESW-9V56AX-R24
PESW-9V56AX-R24
PESW-9V56AX-R25
PESW-9V56AX-R25
PESW-9V56AX-R25
PESW-9V56AX-R25
PESW-9V56AX-R25
PESW-9V56AX-R25
PESW-9V56AX-R25
PESW-9V56AX-R25
PESW-9V56AX-R26
PESW-9V56AX-R26
PESW-9V56AX-R26
PESW-9V56AX-R26
PESW-9V56AX-R27
PESW-9V56AX-R27
PESW-9V56AX-R27
PESW-9V56AX-R27
PESW-9V56AX-R29
PESW-9V56AX-R29
PESW-9V56AX-R29
PESW-9V56AX-R29
PESW-12V56AX-R30
PESW-12V56AX-R30
PESW-12V56AX-R30
PESW-12V56AX-R30
PESW-18V56AX-R32
PESW-18V56AX-R32
PESW-18V56AX-R32
PESW-18V56AX-R32
PESW-32V56AX-R33
PESW-32V56AX-R33
PESW-32V56AX-R33
PESW-32V56AX-R33
PESW-32V56AX-R34
PESW-32V56AX-R34
PESW-32V56AX-R34
PESW-32V56AX-R34
PESW-50V56AX-R36
PESW-50V56AX-R36
PESW-50V56AX-R36
PESW-50V56AX-R36
PESW-50V56AX-R38
PESW-50V56AX-R38
PESW-50V56AX-R38
PESW-50V56AX-R38
PESW-65V56AX-R39
PESW-65V56AX-R39
PESW-65V56AX-R39
PESW-65V56AX-R39
Reference
101
www.pamensky.com
Direct On-Line Starter Sizing Guide
PESW
Motor
HP
60
75
Notes:
PESW Direct On-Line Starter Part Number
RPM
Frame
Voltage
3600
1800
1200
900
3600
1800
1200
900
364/5TS
364/5T
404/5T
404/5T
364/5TS
364/5T
404/5T
444/5T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
230V
460V
575V
PESW-95V47AX-R43
PESW-95V47AX-R43
PESW-95V47AX-R43
PESW-95V47AX-R43
PESW-105V47AX-R44
PESW-105V47AX-R44
PESW-105V47AX-R44
PESW-105V47AX-R44
PESW-80V56AX-R41
PESW-80V56AX-R41
PESW-80V56AX-R41
PESW-80V56AX-R41
PESW-95V56AX-R43
PESW-95V56AX-R43
PESW-95V56AX-R43
PESW-95V56AX-R43
This chart is designed as a guide only. For specific sizing please contact V.J. Pamensky Canada Inc.
Reference
5.9
www.pamensky.com
101
Soft Starter Sizing Guide
SSW 06
Motor
HP
1
1.5
2
3
5
7.5
10
15
20
25
30
40
50
5.10
SSW 06 Soft Starter Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
143T
143T
145T
182T
143T
145T
182T
184T
145T
145T
184T
213T
W182T
W182T
213T
215T
184T
184T
215T
254T
213T
213T
254T
256T
215T
215T
256T
284T
254T
254T
284T
286T
256T
256T
286T
324T
284TS
284T
324T
326T
286TS
286T
326T
364/5T
324TS
324T
364/5T
364/5T
326TS
326T
364/5T
404/5T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060016T2257ESZ
SSW060016T2257ESZ
SSW060016T2257ESZ
SSW060016T2257ESZ
SSW060023T2257ESZ
SSW060023T2257ESZ
SSW060023T2257ESZ
SSW060023T2257ESZ
SSW060030T2257ESZ
SSW060030T2257ESZ
SSW060030T2257ESZ
SSW060030T2257ESZ
SSW060045T2257ESZ
SSW060045T2257ESZ
SSW060045T2257ESZ
SSW060045T2257ESZ
SSW060060T2257ESZ
SSW060060T2257ESZ
SSW060060T2257ESZ
SSW060060T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060010T2257ESZ
SSW060016T2257ESZ
SSW060016T2257ESZ
SSW060016T2257ESZ
SSW060016T2257ESZ
SSW060016T2257ESZ
SSW060016T2257ESZ
SSW060016T2257ESZ
SSW060016T2257ESZ
SSW060023T2257ESZ
SSW060023T2257ESZ
SSW060023T2257ESZ
SSW060023T2257ESZ
SSW060030T2257ESZ
SSW060030T2257ESZ
SSW060030T2257ESZ
SSW060030T2257ESZ
SSW060045T2257ESZ
SSW060045T2257ESZ
SSW060045T2257ESZ
SSW060045T2257ESZ
SSW060045T2257ESZ
SSW060045T2257ESZ
SSW060045T2257ESZ
SSW060045T2257ESZ
SSW060060T2257ESZ
SSW060060T2257ESZ
SSW060060T2257ESZ
SSW060060T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060010T5257ESZ
SSW060010T5257ESZ
SSW060010T5257ESZ
SSW060010T5257ESZ
SSW060010T5257ESZ
SSW060010T5257ESZ
SSW060010T5257ESZ
SSW060010T5257ESZ
SSW060010T5257ESZ
SSW060010T5257ESZ
SSW060010T5257ESZ
SSW060010T5257ESZ
SSW060016T5257ESZ
SSW060016T5257ESZ
SSW060016T5257ESZ
SSW060016T5257ESZ
SSW060016T5257ESZ
SSW060016T5257ESZ
SSW060016T5257ESZ
SSW060016T5257ESZ
SSW060023T5257ESZ
SSW060023T5257ESZ
SSW060023T5257ESZ
SSW060023T5257ESZ
SSW060030T5257ESZ
SSW060030T5257ESZ
SSW060030T5257ESZ
SSW060030T5257ESZ
SSW060030T5257ESZ
SSW060030T5257ESZ
SSW060030T5257ESZ
SSW060030T5257ESZ
SSW060045T5257ESZ
SSW060045T5257ESZ
SSW060045T5257ESZ
SSW060045T5257ESZ
SSW060060T5257ESZ
SSW060060T5257ESZ
SSW060060T5257ESZ
SSW060060T5257ESZ
Reference
101
www.pamensky.com
Soft Starter Sizing Guide
SSW 06
Motor
HP
60
75
100
125
150
200
250
300
Notes:
SSW 06 Soft Starter Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
364/5TS
364/5T
404/5T
404/5T
364/5TS
364/5T
404/5T
444/5T
404/5TS
404/5T
444/5T
444/5T
444/5TS
444/5T
444/5T
504/5T
445TS
445T
447T
504/5T
447TS
447T
447T
449T
447TS
447T
586/7T
586/7T
586/7TS
586/7T
586/7T
586/7T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
SSW060170T2257ESZ
SSW060170T2257ESZ
SSW060170T2257ESZ
SSW060170T2257ESZ
SSW060205T2257ESZ
SSW060205T2257ESZ
SSW060205T2257ESZ
SSW060205T2257ESZ
SSW060255T2257ESZ
SSW060255T2257ESZ
SSW060255T2257ESZ
SSW060255T2257ESZ
SSW060312T2257ESZ
SSW060312T2257ESZ
SSW060312T2257ESZ
SSW060312T2257ESZ
SSW060365T2257ESZ
SSW060365T2257ESZ
SSW060365T2257ESZ
SSW060365T2257ESZ
SSW060480T2257ESZ
SSW060480T2257ESZ
SSW060480T2257ESZ
SSW060480T2257ESZ
SSW060604T2257ESZ
SSW060604T2257ESZ
SSW060604T2257ESZ
SSW060604T2257ESZ
SSW060820T2257ESZ
SSW060820T2257ESZ
SSW060820T2257ESZ
SSW060820T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060085T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060130T2257ESZ
SSW060170T2257ESZ
SSW060170T2257ESZ
SSW060170T2257ESZ
SSW060170T2257ESZ
SSW060205T2257ESZ
SSW060205T2257ESZ
SSW060205T2257ESZ
SSW060205T2257ESZ
SSW060255T2257ESZ
SSW060255T2257ESZ
SSW060255T2257ESZ
SSW060255T2257ESZ
SSW060312T2257ESZ
SSW060312T2257ESZ
SSW060312T2257ESZ
SSW060312T2257ESZ
SSW060365T2257ESZ
SSW060365T2257ESZ
SSW060365T2257ESZ
SSW060365T2257ESZ
SSW060060T5257ESZ
SSW060060T5257ESZ
SSW060060T5257ESZ
SSW060060T5257ESZ
SSW060085T5257ESZ
SSW060085T5257ESZ
SSW060085T5257ESZ
SSW060085T5257ESZ
SSW060130T5257ESZ
SSW060130T5257ESZ
SSW060130T5257ESZ
SSW060130T5257ESZ
SSW060130T5257ESZ
SSW060130T5257ESZ
SSW060130T5257ESZ
SSW060130T5257ESZ
SSW060170T5257ESZ
SSW060170T5257ESZ
SSW060170T5257ESZ
SSW060170T5257ESZ
SSW060205T5257ESZ
SSW060205T5257ESZ
SSW060205T5257ESZ
SSW060205T5257ESZ
SSW060255T5257ESZ
SSW060255T5257ESZ
SSW060255T5257ESZ
SSW060255T5257ESZ
SSW060312T5257ESZ
SSW060312T5257ESZ
SSW060312T5257ESZ
SSW060312T5257ESZ
This chart is designed as a guide only. For specific sizing or sizing for larger motors please contact V.J. Pamensky Canada Inc.
Reference
5.11
www.pamensky.com
101
Soft Starter Sizing Guide
SSW 07
Motor
HP
3
5
7.5
10
15
20
25
30
40
50
60
75
100
5.12
SSW 07 Soft Starter Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
W182T
W182T
213T
215T
184T
184T
215T
254T
213T
213T
254T
256T
215T
215T
256T
284T
254T
254T
284T
286T
256T
256T
286T
324T
284TS
284T
324T
326T
286TS
286T
326T
364/5T
324TS
324T
364/5T
364/5T
326TS
326T
364/5T
404/5T
364/5TS
364/5T
404/5T
404/5T
364/5TS
364/5T
404/5T
444/5T
404/5TS
404/5T
444/5T
444/5T
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
208-230/460 & 575V
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070024T5SZ
SSW070024T5SZ
SSW070024T5SZ
SSW070024T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070171T5SZ
SSW070171T5SZ
SSW070171T5SZ
SSW070171T5SZ
SSW070200T5SZ
SSW070200T5SZ
SSW070200T5SZ
SSW070200T5SZ
SSW070255T5SH1Z
SSW070255T5SH1Z
SSW070255T5SH1Z
SSW070255T5SH1Z
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070024T5SZ
SSW070024T5SZ
SSW070024T5SZ
SSW070024T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070017T5SZ
SSW070024T5SZ
SSW070024T5SZ
SSW070024T5SZ
SSW070024T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070030T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070045T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070061T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070085T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
Reference
101
www.pamensky.com
Soft Starter Sizing Guide
SSW 07
Motor
HP
125
150
200
250
300
Notes:
SSW 07 Soft Starter Part Number
RPM
Frame
Voltage
230V
460V
575V
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
3600
1800
1200
900
444/5TS
444/5T
444/5T
504/5T
445TS
445T
447T
504/5T
447TS
447T
447T
449T
447TS
447T
586/7T
586/7T
586/7TS
586/7T
586/7T
586/7T
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
460 & 575V
SSW070312T5SH1Z
SSW070312T5SH1Z
SSW070312T5SH1Z
SSW070312T5SH1Z
SSW070365T5SH1Z
SSW070365T5SH1Z
SSW070412T5SH1Z
SSW070412T5SH1Z
SSW070171T5SZ
SSW070171T5SZ
SSW070171T5SZ
SSW070171T5SZ
SSW070200T5SZ
SSW070200T5SZ
SSW070200T5SZ
SSW070200T5SZ
SSW070255T5SH1Z
SSW070255T5SH1Z
SSW070255T5SH1Z
SSW070255T5SH1Z
SSW070312T5SH1Z
SSW070312T5SH1Z
SSW070312T5SH1Z
SSW070312T5SH1Z
SSW070365T5SH1Z
SSW070365T5SH1Z
SSW070365T5SH1Z
SSW070365T5SH1Z
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070130T5SZ
SSW070171T5SZ
SSW070171T5SZ
SSW070171T5SZ
SSW070171T5SZ
SSW070200T5SZ
SSW070200T5SZ
SSW070200T5SZ
SSW070200T5SZ
SSW070255T5SH1Z
SSW070255T5SH1Z
SSW070255T5SH1Z
SSW070255T5SH1Z
SSW070312T5SH1Z
SSW070312T5SH1Z
SSW070312T5SH1Z
SSW070312T5SH1Z
This chart is designed as a guide only. For specific sizing or sizing for larger motors please contact V.J. Pamensky Canada Inc.
Reference
5.13