INDUSTRIAL
CONSTRUCTION
MINING
AUTOMOTIVE
2013
PRODUCT
GUIDE
Air Tools
Air Compressors
Magnetic Drilling Machines
Accessories
Consumables
CONTENTS
A
Alliance Air Tools
A-1 – A-28
B
Kuani - Impact Wrenches
B-1 – B-8
C
I.A.T. Air Tools
C-1 – C-22
D
Shinano Air Tools
D-1 – D-40
E
Top Cat Air Tools
E-1 – E-22
F
American Assembly Tools Nut Runners
F-1 – F-8
G
Kett Cutting Tools
G-1 – G-8
H
Rotabroach Hole Cutting Systems
H-1 – H-14
I
Trelawny Surface Preparation Equipment
I-1 – I-44
J
Pneutech Construction Tools
J-1 – J-10
K
American Pneumatic Construction Tools
K-1 – K-18
L
Alliance Abrasives & Accessories
L-1 – L-26
M
Tecna Spring Balancers
M-1 – M-6
N
Chieftain Carbide Burrs
N-1 – N-10
O
Pneutech Air Compressors
O-1 – O-20
P
Alliance Air Hose & Fittings
P-1 – P-16
Q
Air Preparation Equipment
Q-1 – Q-18
R
Miscellaneous Air Tools & Equipment
R-1 – R-20
S
Technical Notes & Tables
S-1 – S-8
T
Notes On Compressed Air
T-1 – T-10
U
Terms And Conditions Of Trade
U-1 – U-4
V
Part Number Index
V-1 – V-10
W
Product Description Index
W-1 – W-18
COPYRIGHT
Copyright rests with Industrial Air Tools ABN 90 519 840 717. No part of this
document may be reproduced, scanned or stored in any form without the
written permission of the Proprietor.
2013 PRODUCT GUIDE
DISCLAIMER
The information given in this Catalogue is provided as a guide only. It is the
responsibility of the user to ensure that a product is suitable for the intended
use. Due to continuous product development technical specifications may vary
from those photographed or listed. E&OE.
PERSONAL QUICK REFERENCE
In the tables below you can list the tools you own and the asscoiated consumables / products that you would require on a regular basis.
Providing you with a quick reference to your most used products.
TOOL REFERENCE
TOOL
BRAND
PART NO.
SECTION
PAGE
BRAND
PART NO.
SECTION
PAGE
BRAND
PART NO.
SECTION
PAGE
BRAND
PART NO.
SECTION
PAGE
ASSOCIATED CONSUMABLES (Blades etc.)
PRODUCT NAME
2013 PRODUCT GUIDE
TOOL REFERENCE
TOOL
ASSOCIATED CONSUMABLES (Blades etc.)
PRODUCT NAME
PERSONAL QUICK REFERENCE
In the tables below you can list the tools you own and the asscoiated consumables / products that you would require on a regular basis.
Providing you with a quick reference to your most used products.
TOOL REFERENCE
TOOL
BRAND
PART NO.
SECTION
PAGE
BRAND
PART NO.
SECTION
PAGE
BRAND
PART NO.
SECTION
PAGE
BRAND
PART NO.
SECTION
PAGE
ASSOCIATED CONSUMABLES (Blades etc.)
PRODUCT NAME
TOOL REFERENCE
ASSOCIATED CONSUMABLES (Blades etc.)
PRODUCT NAME
2013 PRODUCT GUIDE
TOOL
PERSONAL QUICK REFERENCE
In the tables below you can list the tools you own and the asscoiated consumables / products that you would require on a regular basis.
Providing you with a quick reference to your most used products.
TOOL REFERENCE
TOOL
BRAND
PART NO.
SECTION
PAGE
BRAND
PART NO.
SECTION
PAGE
BRAND
PART NO.
SECTION
PAGE
BRAND
PART NO.
SECTION
PAGE
ASSOCIATED CONSUMABLES (Blades etc.)
PRODUCT NAME
2013 PRODUCT GUIDE
TOOL REFERENCE
TOOL
ASSOCIATED CONSUMABLES (Blades etc.)
PRODUCT NAME
SECTION A
BLOW GUNS
CAULKING GUN
DRILLS
ENGRAVING PEN
GRINDERS
HAMMERS
IMPACT WRENCHES
NAILERS
NEEDLE SCALER
NIBBLER
PANEL CUTTER
PIN STRIPE REMOVER
PUNCH / FLANGE TOOL
POLISHERS
RATCHET WRENCHES
RIVETERS
ALLIANCE
AIR TOOLS
SANDERS
SAWS
SCRAPER
SCREWDRIVERS
SHEAR
•
•
•
•
Mainly sourced in Taiwan, ALLIANCE brand Air Tools have
been imported into Australia for the past 18 years.
These tools have proved to be good quality, durable
products well able to give years of satisfactory service in
General Industry.
ALLIANCE Air Tools are backed by large stocks of spare
parts and owners can carry out their own service work or
have their tools serviced through a network of ALLIANCE
resellers Australia wide.
ALLIANCE Air Tools are covered by a 2 year standard
warranty when subject to normal wear and tear.
Specifications subject to change without notice. E&OE
SPRAY GUNS
STAPLERS
TYRE BUFF
TYRE INFLATERS
VACUUM BLOWER
CONTENTS - ALLIANCE AIR TOOLS
TOOLS
ALLIANCE AIR TOOLS
CONTENTS
2
A-2
Blow Guns
Caulking Gun
Drill
Drill
Drills
Engraving Pen
Grinders
Grinder
Grinder
Grinders
Grinders
Hammer
Hammer
Hammers
Impact Wrench
Impact Wrenches
Impact Wrenches
Nailers
Needle Scaler
Nibbler
Panel Cutter
Pin Stripe Remover
Punch / Flange Tool
Polishers
Ratchet Wrench
Ratchet Wrench
Ratchet Wrenches
Ratchet Wrenches
Ratchet Wrenches
Riveter
Riveter
Sanders
Sanders
Sander
Sanders
Sanders
Sanders
Sander
Sander
Sander
Sander
Saws
Scraper
Screwdrivers
Shear
Spray Gun
Spray Gun
Spray Gun
Spray Gun
Spray Gun
Staplers
Tyre Buff
Tyre Inflators
Vacuum / Blower
Specifications subject to change without notice. E&OE. ©
PAGE
Standard
Straight
Angle
Pistol
Percussion
Angle
Turbine
Vertical
Micro
Die
Bump
Nailing
Pistol
3/8” Butterfly
1/2” Square Drive
3/4” Square Drive
C1 Series
Pistol
Sheet Metal
Abrasive
Eraser Wheel
Sheet Metal
Pistol Grip
Through Type
1/4” Square Drive
3/8” Square Drive
1/2” Square Drive
Swing Head
3/16” Capacity
1/4” Capacity
Belt
Pistol
Angle
Disc
Dual Action
Geared Head
1/2 Sheet Orbital
Straight Line
Wet
Straight Line Kit
Reciprocating
Gasket Removal
Adjustable Clutch
Double Blade
Under Body
Gravity Feed
High Efficiency
High Production
Finishing
Furniture
Quick Change
3
4
4
4
4
6
6
8
8
8
9
10
10
11
11
11
12
12
13
13
13
14
14
14
15
16
16
16
17
17
17
18
18
19
19
19
20
21
21
21
22
24
24
25
25
26
26
26
26
26
27
27
28
28
BLOW GUNS
AG-4
AG-4L
3
BLOW GUNS
242mm
480mm
115mm
115mm
STANDARD BLOW GUN
EXTENDED NOZZLE BLOW GUN
FLUORESCENT ORANGE / BRASS INSERT /
BLACK RUBBER TIP / FULL PRESSURE NOZZLE
FLUORESCENT ORANGE / BRASS INSERT /
BLACK RUBBER TIP / FULL PRESSURE NOZZLE
TUBE SIZE
6mmØ
¼”NPT
0.114kg
24mm
AIR INLET SIZE
NET WEIGHT
WIDTH
Light blowgun for dusting and removal of
waste and foreign particles from off the
work surface.
TUBE SIZE
AIR INLET SIZE
NET WEIGHT
WIDTH
EYE
PROTECTION
NEEDED
AG-5M
6mmØ
¼”NPT
0.1305kg
24mm
Same as AG-4 but with extended nozzle for
easier access into hard to reach and deep
areas.
AG-6
62mm
125mm
125
60mm
METAL BLOW GUN
UN
IN-LINE BLOW GUN
METAL BODY AND TIP / FULL PRESSURE NOZZLE
METAL BODY – RUBBER TIP
NET WEIGHT
WIDTH
¼”NPT
”NPT
0.2kg
25mm
Same applications as AG4 but has the added
advantage of having an alternative air inlet in the
top of the blower so it can be suspended above
the work area.
AIR INLET SIZE
NET WEIGHT
WIDTH
EYE
PROTECTION
NEEDED
¼”NPT
0.1kg
28mm
Designed to be installed along an air hose where a
stream of air is needed at a particular point along
a production line for a process such as cooling or
cleaning.
EYE
PROTECTION
NEEDED
ALLIANCE AIR TOOLS
100mm
AIR INLET SIZE
EYE
PROTECTION
NEEDED
WARNING: Eye protection must be worn when using blowguns.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-3
CAULKING GUN
AL-3254
CAULKING GUN / DRILLS
4
STANDARD CAULKING GUN
STANDARD TUBE SIZE
50mmØ x 210mm
¼”NPT
1.12kg
30 – 60psi
63mm
AIR INLET SIZE
NET WEIGHT
OPERATING PRESSURE
WIDTH
310mm
Pneumatic caulking gun for easy dispensing of
standard rigid cartridges.
158mm
DRILLS
AL-1200
AL-1202
10MM ANGLE DRILL
KEYED CHUCK / REVERSIBLE
10MM STRAIGHT DRILL
DRILLING CAPACITY
KEYLESS CHUCK / POLYMER BODY COVER / VARIABLE SPEED
/ SWIVEL EXHAUST / NON REVERSIBLE
DRILLING CAPACITY
ALLIANCE AIR TOOLS
FREE SPEED
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
FREE SPEED
AV AIR CONS
10mm
2600rpm
170L/min 6cfm
¼”NPT
0.93kg
44mm
212mm
AIR INLET SIZE
44mm
NET WEIGHT
WIDTH
10mm
1800rpm
170L/min 6cfm
¼”NPT
1.18kg
38mm
Also Available
This tool with plastic keyless chuck, order AL-1202K
AL-1203
AL-1204
10MM PISTOL DRILL
13MM PISTOL DRILL
KEYED CHUCK / REVERSIBLE
KEYED CHUCK / REVERSIBLE
FREE SPEED
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
DRILLING CAPACITY
10mm
1800rpm
170L/min 6cfm
¼”NPT
1.2kg
40mm
General purpose 10mm drill for automotive
workshops, motor body repair shops, light
engineering shops and general manufacturing
applications.
Also Available
For this tool with plastic keyless chuck,
order AL-1203K
84mm
Angle head allows access into areas that pistol and straight drills can't reach.
Used for drilling, tapping, reaming, screwdriving and nut running in confined
locations.
Straight drills are often more ergonomically appropriate for processes such as
vertical drilling in manufacturing and production lines. Comes standard with a
keyless chuck.
DRILLING CAPACITY
208mm
FREE SPEED
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
185mm
145mm
13mm
800rpm
170L/min 6cfm
¼”NPT
1.37kg
42mm
Slower version of AL-1203. Used for general purpose
drilling or tapping of holes up to ½” diameter. Can
also be used as a screwdriver or nut runner. Used
in manufacturing, auto repair workshops and tyre
industry.
210mm
150mm
Also Available
For this tool with plastic keyless chuck, order AL-1204K
For Drill Chucks and Keys see page L-19, Enquire about Spare Parts and Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-4
Specifications subject to change without notice. E&OE. ©
DRILLS
AL-1205
AL-1206
5
DRILLS
210mm
210mm
164mm
164mm
10MM PISTOL DRILL
KEYED CHUCK / COMPOSITE BODY / NOISE REDUCED
10MM REVERSIBLE PISTOL DRILL
KEYED CHUCK / COMPOSITE BODY / NOISE REDUCED
DRILLING CAPACITY
FREE SPEED
NOISE LEVEL
AVERAGE AIR CONS
AIR INLET SIZE
AIR HOSE ID
WIDTH
NET WEIGHT
10mm
2000rpm
73dB(A) (±2)
170L/min 6cfm
¼”NPT
10mm 3/8”
45mm
1.15kg
Lightweight general purpose drill for many industries
including manufacturing plants, motor body repair shops,
automotive repair shops, etc. Improved muffler design
reduces noise without speed or torque reduction.
Also Available
For this tool with plastic keyless chuck,
huck, order AL-1205K
AL-1207
DRILLING CAPACITY
FREE SPEED
NOISE LEVEL
AVERAGE AIR CONS
AIR INLET SIZE
AIR HOSE ID
WIDTH
NET WEIGHT
Reversible model of AL-1205. Also features the improved muffler
design which reduces noise without speed or torque reduction.
Also Available
For this tool with plastic keyless chuck, order AL-1206K
AL-1208
245mm
164mm
13MM REVERSIBLE PISTOL DRILL
KEYED CHUCK / COMPOSITE BODY / NOISE REDUCED
FREE SPEED
NOISE LEVEL
AVERAGE AIR CONS
AIR INLET SIZE
AIR HOSE ID
WIDTH
NET WEIGHT
13mm
500rpm
73dB(A) (±2)
170L/min 6cfm
¼”NPT
10mm
45mm
1.4kg
164mm
13MM REVERSIBLE PISTOL DRILL
KEYED CHUCK / COMPOSITE BODY / NOISE REDUCED
DRILLING CAPACITY
FREE SPEED
NOISE LEVEL
AVERAGE AIR CONS
AIR INLET SIZE
AIR HOSE ID
WIDTH
NET WEIGHT
13mm
800rpm
73dB(A) (±2)
170L/min 6cfm
¼”NPT
10mm
45mm
1.4kg
Similar to AL-1205 but with increased capacity for more
demanding applications such as larger holes, tapping and
hole sawing. Also features the improved muffler design which
reduces noise without speed or torque reduction.
Similar to AL-1207 but with free speed of 800rpm. Also features the
improved muffler design which reduces noise to 73dB(A) (±2) without
speed or torque reduction.
Also Available
For this tool with plastic keyless chuck, order AL-1207K
Also Available
For this tool with plastic keyless chuck, order AL-1208K
ALLIANCE AIR TOOLS
245mm
DRILLING CAPACITY
10mm
1800rpm
73dB(A) (±2)
170L/min 6cfm
¼”NPT
10mm 3/8”
45mm
1.15kg
For Drill Chucks see page L-19 For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-5
ENGRAVING PEN
AL-2480
ENGRAVING PEN / GRINDERS
6
PERCUSSION ENGRAVING PEN
HARDENED STYLUS TIP
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
HOSE LENGTH
WIDTH
283L/min 10cfm
¼”NPT
0.25kg
1480mm
18mm
140mm
18mm
Percussion type engraving pen for marking and
engraving of most materials.
For replacement Tip - order H-292
GRINDERS
ALLIANCE AIR TOOLS
AL-1330
AL-1331
AL-1335
191mm
240mm
254mm
68mm
100mm
100mm
50MM ANGLE GRINDER / SANDER
100MM ANGLE GRINDER
125MM ANGLE GRINDER
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / VARIABLE SPEED / SWIVEL EXHAUST
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / SOFT GRIP SIDE HANDLE /
VARIABLE SPEED
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / SOFT GRIP SIDE HANDLE /
VARIABLE SPEED
DISC SIZE
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
50 x 2.8 x 9.6CH
15 000rpm
425L/min 15cfm
¼” NPT
0.8kg
64mm
DISC SIZE
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Small versatile grinder also supplied with a
50mm hook & loop backing pad for use as a
sander. Ideal for areas with restricted access
and finer grinding and sanding of smaller
surface areas.
For 50mm depressed centre grinding wheel-order
C1330-30
100 x 6 x 16CH
M10 x 1.5
10 000rpm
567L/min 20cfm
¼” NPT
1.3kg
120mm
Lightweight, powerful 4” grinder for all general
grinding applications in metal fabrication
workshops, maintenance vehicles and workshops,
and installation teams. Takes Type 27 depressed
centre grinding wheels.
DISC SIZE
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
125 x 6 x 22CH
5/8”-11
10 000rpm
567L/min 20cfm
¼” NPT
1.3kg
143mm
Same applications as AL-1331 but with a
larger guard to take 5” diameter wheels.
Takes Type 27 depressed centre grinding
wheels.
WARNING: MOS of abrasive wheels must exceed free speed of tool. For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-6
Specifications subject to change without notice. E&OE. ©
GRINDERS
AL-1344
AL-1345
7
147mm
120mm
100MM HEAVY DUTY ANGLE GRINDER
125MM HEAVY DUTY ANGLE GRINDER
LEVER THROTTLE
DISC SIZE
SPINDLE THREAD
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
AIR HOSE SIZE
WIDTH
LEVER THROTTLE
100 x 6 x 16CH
M10 x 1.5
0.7kW 0.95HP
13600rpm
467L/min 16.5cfm
¼”NPT
1.5kg
10mm I.D.
120mm
DISC SIZE
SPINDLE THREAD
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
AIR HOSE SIZE
WIDTH
Heavy duty 4” angle grinder with applications similar to AL-1331
but where a larger tool with greater power is required. Takes Type
27 depressed centre grinding wheels.
AL-1347
AL-1
AL
134
347
7
125 x 6 x 22.2CH
M14 x 2.0
0.7kW 0.95HP
10900rpm
963L/min 16.5cfm
¼” NPT
1.6kg
10mm I.D.
143mm
Similar tool to AL-1344 but with a larger guard to take 125mm wheels.
Takes Type 27 depressed centre grinding wheels.
AL-1349
200mm
350mm
250mm
180MM HEAVY DUTY ANGLE GRINDER
230MM HEAVY DUTY ANGLE GRINDER
LEVER THROTTLE
LEVER THROTTLE
SPINDLE THREAD
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
AIR HOSE SIZE
WIDTH
180 x 6 x 22.2CH
M14 x 2.0
1.5kW 2.0HP
7600rpm
1614L/min 57cfm
¼” NPT
3.1kg
13mm I.D.
197mm
Powerful, heavy duty 7” grinder for industrial applications including
dressing flame cut edges, grinding and blending welds, plate chamfering
prior to welding, removing scale from flat surfaces, flash removal and
general cleaning in foundries, etc. Takes Type 27 depressed centre
grinding wheels.
DISC SIZE
SPINDLE THREAD
POWER
FREE SPEED
230 x 6 x 22.2CH
5/8”-11
1.9kw 2.5HP
5900rpm
MAX. AIR CONS
1897L/min 67cfm
1/2” NPT
NET WEIGHT
4.4kg
AIR HOSE SIZE
10mm 3/8”
WIDTH
280mm
Heavy duty 9” angle grinder for use in fabrication shops, shipyards,
foundries and many other industries where heavy grinding is required.
Takes Type 27 depressed centre grinding wheels.
AIR INLET SIZE
ALLIANCE AIR TOOLS
360mm
DISC SIZE
GRINDERS
270mm
270mm
WARNING: MOS of abrasive wheels must exceed free speed of tool. Enquire about Abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-7
GRINDERS
AL-1355
8
GRINDERS
340mm
140mm
125MM HEAVY DUTY TURBINE GRINDER
R
SAFETY LEVER THROTTLE / SUPPLIED WITH WHIP HOSE & FILTER
DISC SIZE
SPINDLE THREAD
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
AIR HOSE SIZE
WIDTH
125 x 6 x 22.2CH
5/8”-11
2.2kW 3HP
12000rpm
1800L/min 64cfm
1/2" NPT
2.2kg
13mm 1/2"
235mm
Gearbox
Features light weight and high power for maximum productivity and material
removal. Less costly to maintain because there are no vanes or cylinder that
wear and require maintenance. Ergonomic design. Auto-balancer for lower
vibration. Speed governor for safety. Takes Type 27 Depressed Centre Grinding
Wheels or Cup Wheels with appropriate guards. Used in Shipyards, Fabrication
Shops, Construction Sites, Steel Mills, Foundries, etc.
ALLIANCE AIR TOOLS
AL-1359
Turbine Motor
Emergency Switch
Speed Governor
Spindle Lock
Wheel Guard
Safety Lever Throttle
AL-1300
185mm
260mm
230MM HEAVY DUTY VERTICAL GRINDER
MICRO GRINDER
LEVER THROTTLE
ROLL THROTTLE
DISC SIZE
SPINDLE THREAD
FREE SPEED
POWER
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
AIR HOSE SIZE
230 x 6 x 22.2CH
5/8”-11
6000rpm
2.25kW 3.0HP
2294L/min 81cfm
1/2” NPT
4.97kg
13mm I.D.
Industrial quality vertical grinder for descaling, smoothing,
finishing, removal of rust and weld spatter, cleaning castings
and masonry work and many other applications in shipyards,
fabrication shops, construction sites, steel mills, etc. Takes Type
27 Depressed Centre Grinding Wheels.
STD COLLET
OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
1/8"
3mm
60 000rpm
57L/min 2.0cfm
1/4” NPT
0.13kg
20mm
Light compact tool for precision grinding with small carbide
burrs or mounted stones.
WARNING: MOS of abrasive wheels must exceed free speed of tool. Enquire about Abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-8
Specifications subject to change without notice. E&OE. ©
GRINDERS
AL-1310
AL-1310K
AL-1320
9
178mm
37mm
44mm
¼” MINI DIE GRINDER
¼” MINI DIE GRINDER KIT
1/4” MEDIUM DIE GRINDER
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / VARIABLE SPEED / SWIVEL EXHAUST
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / VARIABLE SPEED / SWIVEL EXHAUST
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / VARIABLE SPEED / SWIVEL EXHAUST
STD COLLET
OPTIONS
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm, 1/8”, 3mm
25 000rpm
284L/min 10cfm
¼”NPT
0.43kg
38mm
Light weight compact die grinder for easy
manoeuvreability in fine grinding of tools and
dies and light metal finishing. Takes carbide
burrs, mounted points, mini drum sanders,
polishing stones, etc.
AL-1320K
STD COLLET
OPTIONS
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm 1/8”, 3mm
25 000rpm
284L/min 10cfm
¼”NPT
0.43kg
38mm
AL-1310 mini die grinder in a kit with a range
of mounted points.
AL-1312
STD COLLET
OPTIONS
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm 1/8”, 3mm
23 000rpm
425L/min 15cfm
¼”NPT
0.66kg
44mm
A medium sized tool for general purpose die
grinding, flash removal and finishing using
carbide burrs, mounted points, mini drum
sanders, polishing stones, etc.
AL-1312K
70mm
1/4” MEDIUM DIE GRINDER KIT
¼” MINI ANGLE DIE GRINDER
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / VARIABLE SPEED / SWIVEL EXHAUST
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / VARIABLE SPEED / SWIVEL EXHAUST
OPTIONS
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm 1/8”, 3mm
23 000rpm
425L/min 15cfm
¼”NPT
0.66kg
44mm
STD COLLET
OPTIONS
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm 1/8”, 3mm
22 000rpm
283L/min 10cfm
¼”NPT
0.53kg
38mm
50MM MINI ANGLE GRINDER /
SANDER KIT
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / VARIABLE SPEED / SWIVEL EXHAUST /
EZ-LOCK HOLDER AND DISCS
STD COLLET
OPTIONS
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
AL-1320 medium die grinder in a kit with a
range of mounted points.
Compact right angle die grinder for working in
confined spaces. Uses are similar to AL-1310
but where access is restricted. Can also be
used with 50mm surface conditioning discs.
WIDTH
¼”
6mm,1/8”, 3mm
22 000rpm
283L/min 10cfm
¼”NPT
0.53kg
38mm
AL-1312 mini angle die grinder in a kit with a
range of mounted points, surface conditioning
discs, mandrel and backing pads.
ALLIANCE AIR TOOLS
154mm
STD COLLET
GRINDERS
156mm
For Burrs see Section N, For Ezi-Lock Holders & Discs see pages L-3, L-4, L-5, L-22. For Air Tool OIl see page L-25.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-9
GRINDERS
AL-1322
AL-1322K
AL-1321
GRINDERS / HAMMERS
10
280mm
178mm
42mm
76mm
¼” MEDIUM ANGLE DIE
GRINDER
75MM ANGLE DIE GRINDER /
SANDER KIT
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / VARIABLE SPEED / SWIVEL EXHAUST
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / VARIABLE SPEED / SWIVEL EXHAUST /
EZ-LOCK HOLDER & DISCS
STD COLLET
¼”
6mm 1/8”, 3mm
18 000rpm
340L/min 12cfm
¼”NPT
0.75kg
44mm
OPTIONS
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
ALLIANCE AIR TOOLS
A medium sized version of the AL-1312 with
slower speed and higher torque for heavier jobs.
Can be used with 50mm or 75mm surface
conditioning discs.
¼” EXTENDED DIE GRINDER
SAFETY LEVER THROTTLE / POLYMER BODY
COVER / VARIABLE SPEED / SWIVEL EXHAUST
STD COLLET
OPTIONS
STD COLLET
OPTIONS
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm 1/8”, 3mm
18 000rpm
340L/min 12cfm
¼”NPT
0.75kg
44mm
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm 1/8”, 3mm
20 000rpm
340L/min 12cfm
¼”NPT
0.8kg
44mm
A medium sized die grinder with extended
spindle housing for better control using two
hands and better access into deep recesses
and internal work where extra reach is
required.
AL-1322 medium angle die grinder in a kit with
a range of mounted points and 75mm surface
conditioning discs, mandrels and backing pads.
HAMMERS
AL-2450
AL-2460
123mm
126mm
PALM GRIP BUMP HAMMER
INCLUDES TWO DIFFERENT TIPS /
PRESS TO START
120mm
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
BLOWS PER MINUTE
WIDTH
85L/min 3cfm
¼”NPT
1.10kg
1000
63mm
AIR PALM GRIP SPEED NAILER
92mm
Compact bump hammer mainly used for putting ‘T’ moulds on the edges of furniture
e.g. table tops, etc. The AL-2450 is ideal for production lines etc. as it reduces operator
fatigue. 6 tips are available for this tool depending on the material being worked on.
Comes standard with aluminum and a medium plastic (black) tip.
Available Tips
Aluminium Tip,
Yellow Hard Plastic Tip,
Black Medium Plastic Tip,
Blue Soft Plastic Tip,
Red Super Soft Plastic Tip,
Steel Tip,
C2450-15AL*
C2450-15H
C2450-15M*
C2450-15S
C2450-15SS
C2450-15ST
LEATHER COVER / PRESS TO START
AV. AIR CONS
AIR INLET SIZE
WORKING PRESSURE
NET WEIGHT
BLOWS PER MINUTE
WIDTH
142L/min 5cfm
¼”NPT
50-125psi
1.2kg
1000
92mm
The AL-2460 is a unique tool that automatically hammers nails home without the
use of a trigger. It starts automatically when the driver presses against the nail
head and stops automatically when the nail head is driven home and no longer
touches the driver. The bump nailer now comes standard with a leather cover, with
finger straps and the tool fits comfortably in the palm of your hand. This makes
nailing a quantity of nails up to 180mm long with maximum head size of 10mm an
easy task. Applications include landscaping, decking, sub flooring, light framing,
pallet and crate assembly.
*Supplied standard with tool
For Burrs see Section N, For Ezi-Lock Holders & Discs see pages L-3, L-4, L-5, L-22
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-10
Specifications subject to change without notice. E&OE. ©
HAMMERS
AL-4200
AL-4202K
11
HAMMERS / IMPACT WRENCHES
231mm
192mm
153mm
152mm
AIR HAMMER
HEAVY-DUTY AIR HAMMER KIT
SUPPLIED WITH 2 CHISELS
FIVE CHISELS AND RETAINING SPRING INCLUDED
SHANK SIZE
10.2mm (0.401”) dia.
66mm
3000bpm
156L/min 5.5cfm
920L/min 32.5cfm
1.7kg
52mm
PISTON STROKE
BLOWS PER MIN
AV. AIR CONS
MA X AIR CONS
NET WEIGHT
WIDTH
SHANK SIZE
PISTON STROKE
BLOWS PER MIN
AV. AIR CONS
MA X AIR CONS
NET WEIGHT
WIDTH
Medium duty air hammer used for brick cleaning, stripping, rivet cutting, metal
cutting, automotive front end work, etc. Takes Alliance quick change chisel retainer
(AA-5001) and needle scaler attachment (AA-5000) for weld dressing. Comes with
chisel and point, other chisels available separately.
10.2mm (0.401”)
92mm
2000bpm
170L/min 6cfm
850L/min 30cfm
1.9kg
52mm
Heavy-duty air hammer supplied in a kit with 5 chisels. Applications
are the same as AL-4200 but has a greater capacity. Takes AA-5001
quick change chisel retainer and AA-5000 needle scaler attachment
for weld dressing.
AL-2251
L-2
225
251
1
AL-2350
AL-2359
184mm
185mm
150mm
180mm
197mm
86mm
3/8” BUTTERFLY IMPACT WRENCH
BOLT CAPACIT Y
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE REQD
NET WEIGHT
WIDTH
10mm
102Nm 75ft lbs
170L/min 6cfm
¼”NPT
3/8” ID
1.75kg
42mm
Butterfly throttle type wrench, with instant
reverse, for single handed work on small
fasteners in auto repair shops on body panels,
ignitions, carburetors, struts etc. as well as
small engine and light industrial work.
½” SQ. DR. IMPACT WRENCH
PIN CLUTCH / RUBBER HAND GRIP
BOLT CAPACIT Y
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE REQD
NET WEIGHT
WIDTH
16mm
380Nm 280ft lbs
108L/min 3.8cfm
¼”NPT
3/8” ID
2.6kg
52mm
SUPER DUTY ½” SQ. DR.
IMPACT WRENCH
TWIN HAMMER / HANDLE EXHAUST
BOLT CAPACIT Y
MAX TORQUE
ULTIMATE UNDO TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE REQD
NET WEIGHT
Light duty impact wrench for bench work
assembly and repair on items such as engines,
transmissions, lawnmower base plates, engine
pumps, air compressors, electric motors, etc.
Pin clutch for smoother operation.
WIDTH
16mm
542Nm 400ft lbs
677Nm 500ft lbs
113L/min 4cfm
¼”NPT
3/8” ID
2.80kg
64mm
ALLIANCE AIR TOOLS
IMPACT WRENCHES
Heavy duty ½” impact wrench for automotive,
industrial and farm use. Twin hammer clutch
gives greater impact than pin clutch.
For 401 Series Chisels see pages from L-16, For Chisel Retainers see page L-14, For Impact Sockets see pages L-8, L-9
For Air Tool OIl see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-11
IMPACT WRENCHES
AL-2359-2
AL-2423
AL-2423-6
IMPACT WRENCHES / NAILERS
12
228mm
237mm
371mm
218mm
180mm
218mm
SUPER DUTY 2” EXTENDED
½” IMPACT WRENCH
TWIN HAMMER CLUTCH / HANDLE EXHAUST
BOLT CAPACIT Y
MAX TORQUE
ULTIMATE UNDO
TORQUE
AV. AIR CONS
AIR INLET
NET WEIGHT
WIDTH
16mm
542Nm 400ft lbs
677Nm 500ft lbs
BOLT CAPACIT Y
ULTIMATE UNDO
TORQUE
AV. AIR CONS
AIR INLET
113L/min 4cfm
¼”NPT
3/8” ID
2.96kg
64mm
Same as AL-2359 but with 2” extended anvil for
easier access into recessed wheels and other
applications in confined spaces.
SUPER DUTY 6” EXTENDED
ANVIL ¾” IMPACT WRENCH
TWIN HAMMER CLUTCH / HANDLE EXHAUST
MAX TORQUE
AIR HOSE REQD
ALLIANCE AIR TOOLS
SUPER DUTY ¾” SQ. DR.
IMPACT WRENCH
AIR HOSE REQD
NET WEIGHT
WIDTH
TWIN HAMMER CLUTCH / HANDLE EXHAUST
25mm
1016Nm 750ft lbs
1288Nm 950ft lbs
BOLT CAPACIT Y
MAX TORQUE
ULTIMATE UNDO
TORQUE
AV. AIR CONS
198L/min 7cfm
¼”NPT
1/2” ID
4.55kg
76mm
AIR INLET
AIR HOSE REQD
NET WEIGHT
WIDTH
A heavy duty ¾” impact wrench for operation in
many construction, industrial, automotive and farm
applications. Uses include pipeline construction,
heavy vehicle tyres and service, steel and concrete
erection, heavy machinery maintenance and repair.
25mm
1016Nm 750ft lbs
1288Nm 950ft lbs
198L/min 7cfm
¼”NPT
1/2” ID
4.99kg
76mm
Same as AL-2423 but with 6” extended anvil
for easier access into recessed wheels and
other applications in confined spaces.
NAILERS
AT-3340
AT-3345
NAILER - C1 SERIES
TAKES C1 SERIES BRADS TO 50MM
232mm
234mm
NAILER - C1 SERIES
TOOL WIDTH
CAPACITY
TAKES C1 SERIES BRADS TO 32MM
190mm
TOOL WIDTH
CAPACITY
HEAD
GAUGE
50mm
10mm-32mm
2mm
18
HEAD
GAUGE
55mm
15mm-50mm
2mm
18
This nailer has similar uses and applications to the
AT-3340 but where longer brads are required.
Brads to suit AT-3340:
10mm C110
15mm C115
20mm C120
25mm C125
30mm C130
32mm C132
Brads to suit AT-3345:
15mm C115
20mm C120
25mm C125
30mm C130
32mm C132
35mm C135
38mm C138
40mm C140
45mm C145
50mm C150
Brads supplied in quantities of 5000 only
Brads supplied in quantities of 5000 only
Pneumatic nailer used mainly by cabinet makers for
drawer and furniture manufacture and assembly.
Also used for picture frame assembly.
247mm
For Impact Sockets see pages L-9, L-10 Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-12
Specifications subject to change without notice. E&OE. ©
NEEDLE SCALER
AL-6000
13
HEAVY DUTY NEEDLE SCALER
BLOWS PER MINUTE
NUMBER OF NEEDLES
AIR CONSUMPTION
NET WEIGHT
WIDTH
4500bpm
28 x 180mm long x 3mmø
340L/min 12cfm
3.5kg
64mm
335mm
Heavy duty pistol grip needle scaler for removal of paint, rust, weld spatter, flux and
scale off steel, particularly on irregular surfaces, corners, depressions and hard-to-reach
areas. Also can be used for cleaning and roughening brick, masonry and concrete. 28
needles give larger work surface area for faster operation than other needle scalers.
175mm
For Spare Needles order C6000-3FTC
NIBBLER
AL-1960
SHEET METAL NIBBLER
POLYMER BODY COVER / VARIABLE SPEED /
SWIVEL EXHAUST
CUTTING CAPACITY
SPEED
STROKE LENGTH
AV AIR CONS
MAX AIR CONS
AIR INLET SIZE
WIDTH
187mm
Versatile, compact tool for nibbling sheet materials including plastic, tin, aluminum, and mild
steel up to 1.2mm thick. Due to its size and design, it is very manoeuvreable in confined
spaces and useful in detailed sheet metal work and auto body repair shops.
100mm
For Spare Punch order C-1960-38
For Spare Die order C-1960-40
PANEL CUTTER
AL-1340
75MM PANEL CUTTER
SAFETY LEVER THROTTLE / POLYMER BODY COVER /
VARIABLE SPEED / SWIVEL EXHAUST
DISC SIZE
FREE SPEED
AV. AIR CONS
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
75 x 1.6 x 9.5CH
21000rpm
85L/min 3cfm
340L/min 12cfm
1/4”NPT
0.8kg
83mm
195mm
64mm
ALLIANCE AIR TOOLS
NET WEIGHT
1.2mm
2600spm
4.5mm
85L/min 3cfm
340L/min 12cfm
1/4”NPT
1.1kg
37mm
NEEDLE SCALER / NIBBLER / PANEL CUTTER
SOLID CAST ALUMINIUM CONSTRUCTION
Cut off grinder for fast cutting of sheet metal, bolts, fibreglass, muffler clamps and hangers, etc.
For spare 75mm Cut-off Wheel order 760908, C1200-42
WARNING: MOS of abrasive wheels must exceed free speed of tool. For Air Tool OIl see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-13
PIN STRIPE REMOVER
AL-1341
14
PIN STRIPE REMOVER
POLISH. / PUN. / FLANGE TOOL / PIN STR. RMV.
POLYMER BODY COVER / VARIABLE SPEED / SWIVEL EXHAUST
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
2600rpm
340L/min 12cfm
1/4”NPT
0.96kg
40mm
Used by automotive painters for removal of pin
stripes before painting. Also erases marks on
plastics and painted surfaces.
212mm
60mm
For Standard Eraser Wheel order 406E
For Notched Eraser Wheel order 406ES
PUNCH / FLANGE TOOL
AL-4800
SHEET METAL PUNCH AND FLANGE TOOL
AIR / HYDRAULIC
PUNCHING CAPACITY
FLANGING CAPACITY
AIR CONS
AIR INLET
WEIGHT
WIDTH
5mmØ x 1.6mm
22 x 12 x 0.8
85L/min 3cfm
¼”NPT
1.3kg
54mm
ALLIANCE AIR TOOLS
245mm
Used for flanging up to 16 gauge steel then
punching a hole around which to run a weld
to produce a stitch welded joint.
55mm
For spare Punch order 4800-36
For spare Die order 4800-40
POLISHERS
AL-1556
75MM QUICK CHANGE DISC POLISHER
COMPOSITE BODY / 75MM RUBBER BACKING PAD FOR
EZ-LOC DISCS / VARIABLE SPEED / NOISE REDUCED
PAD SIZE
SPINDLE THREAD
FREE SPEED
NOISE LEVEL
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
76mm
1/4”-20
2100rpm
73dB(A) (±2)
170L/min 6cfm
¼”NPT
0.77kg
76mm
135mm
150mm
75mm polisher supplied with Ez-loc back-up pad for quick and easy
change of discs. Also features improved muffler design which reduces
noise without speed or torque reduction.
Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-14
Specifications subject to change without notice. E&OE. ©
POLISHERS
AL-1555
AL-1555K
K
15
POLISHERS / RATCHET WRENCHES
135mm
135mm
150mm
150mm
75MM SINGLE ACTION POLISHER
COMPOSITE BODY / HOOK
OOK & LOOP PAD
/ VARIABLE SPEED / NOISE REDUCED
PAD SIZE
SPINDLE THREAD
FREE SPEED
NOISE LEVEL
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
76mm
5/16”-24
2100rpm
73dB(A) (±2)
170L/min 6cfm
¼”NPT
0.77kg
76mm
75MM SINGLE ACTION POLISHER KIT
COMPOSITE BODY / HOOK & LOOP PAD /
VARIABLE SPEED / NOISE REDUCED
PAD SIZE
SPINDLE THREAD
FREE SPEED
NOISE LEVEL
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
Light and compact polisher for polishing or buffing painted surfaces.
Ideal for confined spaces and small surface areas. Improved muffler
design reduces noise without speed or torque reduction.
WIDTH
76mm
5/16”-24
2100rpm
73dB(A) (±2)
170L/min 6cfm
¼”NPT
0.77kg
76mm
AL-1555 in a blow moulded case with foam compounding pad and
wool buffing pad.
AL-2316
17mm Hex
1/4”, 3/8” SQ. DR. THROUGH RATCHET
REAR EXHAUST
FREE SPEED
TORQUE
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
3/8” Sq. Dr.
450rpm
40Nm 30ft lbs
62L/min 2.2cfm
¼”NPT
0.55kg
32mm
Versatile 17mm ring type ratchet wrench with 4
socket inserts for smaller size nuts as well as a ½”
& 3/8” square drive insert. This means that the
one tool can be used for many applications and ¼”
as well as 3/8” sockets. The main advantage of a
through ratchet is where long studs or threaded
rods are involved preventing the use of standard
sockets. Also useful in confined spaces such as in
aluminum window assembly.
1/2” Sq. Dr.
220mm
50mm
ALLIANCE AIR TOOLS
RATCHET WRENCHES
Also Available
As a special model with 15mm insert AL-2316-15
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-15
RATCHET WRENCHES
AL-2314
AL-2315
AL-2330
233
330
0
RATCHET WRENCHES
16
180mm
180mm
266mm
45mm
45mm
¼” MINI RATCHET WRENCH
3/8” MINI RATCHET WRENCH
REAR EXHAUST
REAR EXHAUST
FREE SPEED
250rpm
33Nm 25ft lbs
85L/min 3cfm
¼”NPT
0.5kg
30mm
TORQUE
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
FREE SPEED
3/8” STANDARD
RATCHET WRENCH
VARIABLE SPEED / POLYMER BODY COVER
/ SWIVEL EXHAUST
250rpm
33Nm 25ft lbs
85L/min 3cfm
¼”NPT
0.51kg
45mm
TORQUE
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
60mm
FREE SPEED
175rpm
67Nm 50ft lbs
85L/min 3cfm
1/4”NPT
1.17kg
44mm
TORQUE
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
Small ratchet wrench for use in confined spaces.
Ideal for under dash work. Also used for small
engine assembly and service, sheet metal and
appliance assembly and other light assembly and
service work.
ALLIANCE AIR TOOLS
AL-2340T
3/8” version of AL-2314.
WIDTH
General purpose 3/8” ratchet wrench for
most assembly, service and maintenance
applications.
AL-2345T
AL-2331
266mm
266mm
266mm
60mm
49mm
60mm
3/8” HEAVY DUTY
RATCHET WRENCH
½” STANDARD
RATCHET WRENCH
½” HEAVY DUTY
RATCHET WRENCH
TWIN PAWL RATCHET HEAD
VARIABLE SPEED / POLYMER BODY COVER
/ SWIVEL EXHAUST
TWIN PAWL RATCHET HEAD
FREE SPEED
TORQUE
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
160rpm
81Nm 60ft lbs
114L/min 4cfm
1/4”NPT
1.18kg
39mm
Heavier duty ratchet wrench than the AL-2330.
Applications include assembly and service of
machinery, pumps, engines, car bodies, exhaust
systems, radiators and air conditioners.
FREE SPEED
FREE SPEED
TORQUE
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
175rpm
67Nm 50ft lbs
85L/min 3cfm
¼”NPT
1.17kg
44mm
Similar tool to AL-2330 but with ½” anvil.
TORQUE
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
160rpm
81Nm 60ft lbs
114L/min 4cfm
¼”NPT
1.18kg
39mm
Similar tool to AL-2340T but with ½” anvil.
For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-16
Specifications subject to change without notice. E&OE. ©
RATCHET WRENCHES - SWING HEAD
D
AL-2320
AL-2321
17
265mm
47mm
47mm
4
3/8” SWING HEAD RATCHET WRENCH
1/2” SWING HEAD RATCHET WRENCH
HEAD ADJUSTABLE 30º UP & DOWN / REAR EXHAUST
HEAD ADJUSTABLE 30º UP & DOWN / REAR EXHAUST
FREE SPEED
MAX. TORQUE
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
180rpm
68Nm 50ft lb
0.14L/min 5cfm
¼”NPT
1.3kg
45mm
Standard size ratchet wrench with a head
that swings up to 30º making it possible to
access areas where standard ratchets and
spanners can’t.
FREE SPEED
180rpm
68Nm 50ft lb
0.14L/min 5cfm
¼”NPT
1.3kg
45mm
MAX. TORQUE
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
½” version of AL-2320.
AL-3101
AL-3102
195mm
165mm
294mm
272mm
STANDARD 3/16” CAPACITY RIVETER
AIR/HYDRAULIC
STD NOSE PIECES
CAPACITY
TRACTION POWER
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
3/32”, 1/8”, 5/32”, 3/16”
3/16”, 4.8mm
720kg
114L/min 4cfm
1/4”NPT
1.3kg
77mm
Very popular 3/16” riveter, used in many
industrial, construction and automotive
applications. Uses include automotive and truck
body construction, shed construction, tool boxes
and many sheet metal fastening applications.
HEAVY DUTY ¼” CAPACITY RIVETER
AIR/HYDRAULIC / 3 PIECE JAW / FORGED
ALUMINUM ALLOY WEAR RESISTANT BODY /
SWIVEL AIR CONNECTION
STD NOSE PIECES
CAPACITY
TRACTION POWER
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
1/8”, 5/32”, 3/16”, 1/4”
1/4”, 6.4mm
1100kg
142L/min 5cfm
1/4”NPT
1.8kg
94mm
Heavier duty riveter than AL-3101 and has
capacity to take steel rivets up to ¼”. Applications
are similar to AL-3101 but where the use is more
demanding and larger rivets are required.
ALLIANCE AIR TOOLS
RIVETERS
RATCHET WRENCHES - SWING HEAD / RIVETERS
265mm
For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-17
SANDERS
AL-5010
AL-5020
SANDERS
18
145mm
138mm
165mm
10MM BELT SANDER
BELT SIZE
10 x 330mm
16 000rpm
453L/min 16cfm
¼” NPT
0.9kg
86mm
BELT SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Narrow belt sander for use with 10mm wide
abrasive belts or surface finishing belts.
Used for light grinding, de-burring , cleaning,
finishing and polishing in tight locations and
small items. Arm angle is easily adjusted to suit
the application.
ALLIANCE AIR TOOLS
AL-1552
20MM BELT SANDER
BELT SIZE
20 x 520mm
16000rpm
538L/min 19cfm
¼” NPT
2.6kg
91mm
BELT SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
80mm
Similar tool to the AL-5010 but with 20mm wide
belt to do the job faster. Used with standard
abrasive cloth belts or surface finishing belts for
similar applications as the 10mm model.
553
55
3
AL-1553
3K
AL-1553K
135mm
135mm
150mm
150mm
50MM QUICK CHANGE
DISC SANDER
ICK CHANGE
75MM QUICK
DISC SANDER
75MM QUICK CHANGE
DISC SANDER
COMPOSITE BODY / 50MM RUBBER BACKING
PAD FOR EZ-LOC DISCS / VARIABLE SPEED /
NOISE REDUCED
COMPOSITE BODY / 75MM RUBBER BACKING
PAD FOR EZ-LOC DISCS / VARIABLE SPEED /
NOISE REDUCED
COMPOSITE BODY / 75MM RUBBER BACKING
PAD FOR EZ-LOC DISCS / VARIABLE SPEED /
NOISE REDUCED
DISC SIZE
SPINDLE THREAD
FREE SPEED
NOISE LEVEL
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
50mm
¼”-20
16000rpm
73dB(A) (±2)
170L/min 6cfm
¼”NPT
0.7kg
50mm
50mm sander with Ez-loc back-up pad for
quick and easy change of abrasive and surface
conditioning discs. Also features the improved
muffler design which reduces noise without
speed or torque reduction.
PAD SIZE
FREE SPEED
AIR INLET SIZE
MAX AIR CONS
NET WEIGHT
WIDTH
75mm
16000rpm
¼” NPT
170L/min 6cfm
0.7kg
127mm
High speed disc sander supplied with 78mm,
116mm, 142mm fibrous backing discs.
Ideal for paint removal, shaping body filler
patches, rust removal, de-burring, weld
cleaning, metal finishing etc.
PAD SIZE
FREE SPEED
AIR INLET SIZE
MAX AIR CONS
WIDTH
75mm
16000rpm
¼” NPT
170L/min 6cfm
127mm
High speed disc sander supplied with 78mm,
116mm, 142mm fibrous backing discs.
Ideal for paint removal, shaping body filler
patches, rust removal, de-burring, weld
cleaning, metal finishing etc.
For Backing Pads, see page L-22, For Sanding Discs see pages L-3, L-4, For Sanding Belts see page L-3, For Air Tool Oil see page L-25
For Surface Conditioning Discs see page L-5, Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-18
Specifications subject to change without notice. E&OE. ©
SANDERS
AL-1554
155
554
4
AL-1336
L-1
133
336
6
AL-1554K
19
SANDERS
125mm
150mm
125MM ANGLE SANDER KIT
75MM SINGLE ACTION SANDER
COMPOSITE BODY / HOOK & LOOP PAD /
VARIABLE SPEED / NOISE REDUCED
PAD SIZE
SPINDLE THREAD
FREE SPEED
NOISE LEVEL
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
76mm
5/16”-24
15000rpm
73dB(A) (±2)
170L/min 6cfm
¼”NPT
0.72kg
76mm
New model 75mm sander for sanding small and
difficult to access areas. Also features improved
muffler design which reduces noise without
speed or torque reduction.
75MM SINGLE ACTION
SANDER KIT
POLYMER BODY COVER /
SAFETY THROTTLE LEVER
CENTRE HOLE
COMPOSITE BODY / HOOK & LOOP PAD /
VARIABLE SPEED / NOISE REDUCED
FREE SPEED
MAX. AIR CONS
PAD SIZE
SPINDLE THREAD
FREE SPEED
NOISE LEVEL
AV. AIR CONS
AIR INLET SIZE
WIDTH
76mm
5/16”-24
15000rpm
73dB(A) (±2)
170L/min 6cfm
¼”NPT
76mm
AIR INLET SIZE
NET WEIGHT ( TOOL)
WIDTH
5” angle sander in a kit with a variety of 125mm
sanding and polishing discs and 70mm surface
conditioning discs. Ideal for use where various types
of sanding tasks are performed in the one workshop.
AL-1554 in a blow moulded case with a 50mm
and 75mm backing pad and a range of 50mm
and 75mm sanding discs.
AL-1
AL
155
551
1
AL-1551
AL-1550
16mm
10 000rpm
538L/min 19cfm
¼” NPT
1.3kg
170mm
AL-1500
210mm
135mm
123mm
120mm
HIGH SPEED DISC SANDER
CENTRE HOLE
PAD SIZE
FREE SPEED
AIR INLET SIZE
MAX AIR CONS
NET WEIGHT
WIDTH
22mm
100, 127mm
18000rpm
¼” NPT
425L/min 15cfm
2.7kg
127mm
High speed disc sander supplied with 78mm,
116mm, 142mm fibrous backing discs.
Ideal for paint removal, shaping body filler
patches, rust removal, de-burring, weld
cleaning, metal finishing etc.
125MM HIGH SPEED DISC
SANDER
150MM BAR HANDLE
DUAL ACTION SANDER
COMPOSITE BODY / NOISE REDUCED
VARIABLE SPEED
PAD SIZE
SPINDLE THREAD
FREE SPEED
NOISE LEVEL
AIR INLET SIZE
AV. AIR CONS
NET WEIGHT
WIDTH
127mm
7/16”-20
PAD SIZE
16000rpm
73dB(A) (±2)
¼” NPT
170L/min 6cfm
1.3kg
127mm
ORBIT DIA
Similar tool to AL-1550 with 127mm fibrous
backing disc for use with fibre abrasive discs.
Also features the improved muffler design
reduces noise without speed or torque reduction.
FREE SPEED
MAX AIR CONS
NET WEIGHT
WIDTH
150mm
10000rpm
5mm
397L/min 14cfm
1.8kg
150mm
Multipurpose sander suitable for most sanding
applications including fibreglass, auto body
repair, furniture, etc. Bar handle allows a two
handed operation and better control than a palm
grip sander in some situations.
ALLIANCE AIR TOOLS
145mm
230mm
For Backing Pads, see page L-22, For Sanding Discs see page L-4, Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-19
SANDERS
AL-1501
AL-1502
AL-1503
SANDERS
20
149mm
217mm
98mm
104mm
150MM PALM GRIP DUAL
ACTION SANDER
LIGHT WEIGHT PLASTIC RESIN SKIRT / SOFT
GRIP / VARIABLE SPEED
PAD SIZE
FREE SPEED
ORBIT DIA
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
150mm
10000rpm
3mm
340L/min 12cfm
¼” NPT
0.96kg
150mm
150MM SELF-VAC DUAL ACTION
PALM GRIP SANDER
150MM CENTRAL VAC PALM
GRIP DUAL ACTION SANDER
LIGHT WEIGHT PLASTIC RESIN SKIRT / SOFT
GRIP / VARIABLE SPEED / HOSE & DUST BAG
LIGHT WEIGHT PLASTIC RESIN SKIRT /
SOFT GRIP / VARIABLE SPEED
PAD SIZE
FREE SPEED
ORBIT DIA
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Popular palm grip sander, used in many industries
including auto body repair, fibreglass, furniture and
white goods. A compact and light weight tool for
continuous use.
ALLIANCE AIR TOOLS
AL-1510
PAD SIZE
150mm
10000rpm
3mm
340L/min 12cfm
¼” NPT
1.3kg
150mm
FREE SPEED
ORBIT DIA
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
150mm
10000rpm
3mm
340L/min 12cfm
¼” NPT
0.96kg
150mm
Same as AL-1501 but with a dust extraction
system, so tool can be connected to a vacuum
system for central dust collection.
Same as AL-1501 but with dust collection
system and bag.
AL-1504
AL-1505
215mm
284mm
95mm
120mm
150MM CENTRAL VAC PALM
GRIP DUAL ACTION SANDER
GEARED HEAD BAR HANDLE
SANDER/POLISHER
SELF-VAC GEARED HEAD BAR
HANDLE SANDER/POLISHER
LIGHTWEIGHT PLASTIC RESIN SKIRT /
SOFT GRIP / VARIABLE SPEED
VARIABLE SPEED / HANDLE EXHAUST /
POLYMER GRIP
VARIABLE SPEED / HANDLE EXHAUST /
POLYMER GRIP
PAD SIZE
FREE SPEED
ORBIT DIA
MAX AIR CONS
WEIGHT
AIR INLET SIZE
WIDTH
150mm
12,000rpm
5mm
340L/min 12cfm
0.85kg
¼”NPT
150mm
Economy model for connection to central
vacuum system.
PAD SIZE
FREE SPEED
ORBIT DIA
MAX AIR CONS
WEIGHT
WIDTH
150mm
900rpm
2.5mm
424L/min 15cfm
1.3kg
235mm
Low speed, high torque bar handle sander
for heavy sanding and polishing work. Gear
mechanism increases sanding power.
PAD SIZE
FREE SPEED
ORBIT DIA
MAX AIR CONS
WEIGHT
WIDTH
150mm
900rpm
2.5mm
424L/min 15cfm
2kg
235mm
Same as AL-1504 but with a dust collection
system and bag.
For Backing Pads, see page L-22, Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-20
Specifications subject to change without notice. E&OE. ©
SANDERS
AL-1506
AL-3019
21
SANDERS
287mm
115mm
115mm
298mm
½ SHEET SELF VAC ORBITAL SANDER
CENTRAL VAC BAR HANDLE GEARED HEAD
SANDER/POLISHER
PAPER CLIPS TO SECURE ABRASIVE PAPER
VARIABLE SPEED / HANDLE EXHAUST / POLYMER GRIP
PAD DIA
FREE SPEED
MAX AIR CONS
ORBIT DIA
WEIGHT
WIDTH
PAD SIZE
FREE SPEED
150mm
900rpm
424L/min 15cfm
2.5mm
1.3kg
152mm
MAX AIR CONS
AIR INLET
NET WEIGHT
WIDTH
112 X 220mm
10000rpm
397L/min 14cfm
¼”NPT
2.33kg
114mm
Dust free ½-sheet sander for sanding large
surface areas on furniture and auto panels.
Supplied with dust collection bag and hose.
Same as AL-1504 but with dust extraction,
so tool can be connected to a vacuum
system for central dust collection.
AL-1512
AL-1580W
270mm
152mm
STRAIGHT LINE FILE/SANDER
TWIN PISTON
PAD SIZE
STOKE SPEED
STROKE LENGTH
MAX AIR CONS
NET WEIGHT
WIDTH
109mm
WET SANDER
PAD SIZE
67 x 400mm
2500spm
25mm
340L/min 12cfm
2.8kg
68mm
Narrow tool for sanding large flat surfaces with a two handed operation.
Used mainly in the automotive body repair industry for body filler
shaping on larger flat surfaces.
FREE SPEED
AIR INLET SIZE
AIR CONS
NET WEIGHT
WIDTH
75mm
4000rpm
¼”NPT
227L/min 8cfm
1.5kg
64mm
Used mainly in the stone, marble and glass industries for sanding
small areas on ceramic and glass products and all materials
requiring sanding with water.
ALLIANCE AIR TOOLS
404mm
Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-21
SANDERS
AL-1513
SANDERS
22
STRAIGHT LINE SANDER
PALM GRIP / TWIN PISTON / HOOK & LOOP
STD. BASE PLATE
OPTIONAL BASE PLATES
SPEED
STROKE
AIR PRESSURE
AIR CONSUMPTION
NET WEIGHT
35 x 93mm
60 x 100mm / 80 x 100mm
4000spm
4mm
6.2bar 90psi
110L/Min 3.9cfm
0.7kg
AL-1513 Line Sander
Lightweight single hand sander with straight line action for
working with the grain on flat timber surfaces and all shapes
of milled timber mouldings.
Twin in-line pistons give powerful sanding action with reduced
noise and vibration for greater operator comfort.
150mm
Tool comes standard with 55 x 100mm sanding pad with paper
clips. It also comes with a 35 x 93mm hook & loop base plate,
36 x 95 x 20 square rubber sanding block and 1 each 36 x 95
sanding sheets in 240 & 320 grits. The square rubber sanding
block can be easily trimmed to conform to the shape being
worked.
Double Piston Mechanism
55mm
In addition to the above standard equipment there are two
optional hook & loop base plates and 12 optional profiled
sanding pads as shown on the following page.
Specially profiled sanding pads can also be ordered to suit
customers’ own moulding shapes. Samples of these are also
shown on the following page.
ALLIANCE AIR TOOLS
Accessories supplied with AL-1513
30 - 240
30 - 320
35 x 93mm
Hook & Loop Base Plate – 28A
36 x 95mm Sanding Sheets
Square Rubber Sanding Block – 29A
AL-1513K
STRAIGHT LINE SANDER KIT
INCLUDES AL-1513 SANDER AND THE
ACCESSORIES SET OUT BELOW
AL-1513 Line Sander
Accessories supplied with AL-1513K
B-1
35 x 93mm
Hook & Loop Base Plate – 28A
D-2
D-1
B-2 B-3
E
Shaped Pads 29B-1 to 29G
30 - 240
30 - 320
G
36 x 95mm Sanding Sheets
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-22
Specifications subject to change without notice. E&OE. ©
SANDERS
AL-1513 ACCESSORIES
23
SANDERS
HOOK & LOOP BASE PLATES
HAND GRIP
28B - 60 x 100mm (optional)
28A - 35 x 93mm
28C - 80 x 100mm (optional)
Hook & Loop Face - 32A
OPTIONAL PROFILE SANDING PADS
29B - 2
29B - 3
29C - 1
29C - 2
29D - 1
29D - 2
29E - 1
29E - 2
29E - 3
29F - 1
29G - 1
SPECIAL MADE-TO-ORDER PROFILED SANDING PADS - EXAMPLES
Top of Balustrade
moulding
Side of Balustrade
moulding
Door edge
ALLIANCE AIR TOOLS
29B - 1
Picture Rail
Specifications subject to change without notice. E&OE. ©
A-23
SAWS
AL-1781
SAWS / SCRAPER
24
RECIPROCATING SAW
SAW BLADES AVAILABLE WITH 14, 18, 24, OR 32 TPI
CUTTIING CAPACITY
SPEED
STROKE LENGTH
MA X AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
1.6mm
10000spm
10mm
340L/min 12cfm
¼”NPT
0.55kg
41mm
230mm
64mm
Light weight, straight grip reciprocating saw for one handed
operation in cutting auto body panels, and other thin materials such
as, fibreglass, metal up to 1.6mm thick, plastics and wood.
AL-1782
RECIPROCATING SAW
REAR EXHAUST / TAKES MINIATURE FILES AND SAW BLADES
CUTTIING CAPACITY
SPEED
STROKE LENGTH
AIR CONS
ALLIANCE AIR TOOLS
NET WEIGHT
WIDTH
3mm
5000spm
10mm
255L/min 9cfm
0.55kg
40mm
Heavier duty reciprocating saw than the AL-1781 with the added
advantage of rear exhaust and hose to take the exhaust away from the
work surface and prevent dust and filings being blown around.
Comes standard with four miniature files.
SCRAPER
AL-4203
SCRAPER
SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
400spm
114L/min 4cfm
¼”NPT
0.7kg
27mm
Pneumatic scraper used mainly by motor repairers and
reconditioners for gasket removal.
For spare blade, order C4203-17
225mm
57mm
For Saw Blades, see page L-14, For Files, see page L-20, For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-24
Specifications subject to change without notice. E&OE. ©
SCREWDRIVERS
AL-1214
25
SCREWDRIVERS / SHEAR
¼” HEX DR. SCREWDRIVER
PISTOL GRIP / ADJUSTABLE CLUTCH / REVERSIBLE
SCREW CAPACITY
TORQUE
FREE SPEED
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
6mm
12Nm 8.8ft lb
1800rpm
142L/min 5cfm
¼”NPT
1.1kg
39mm
203mm
Pistol grip screwdriver with adjustable clutch and thumb actuated reversing
switch for one handed operation. Can be fitted with a large range of
screwdriver bits and sockets to suit all types of screws for a wide range of
assembly applications, e.g. window frames, shower & fly screens, sheet
metal products, furniture, metal roof and wall sheeting, etc.
152mm
AL-1215
¼” HEX DR. SCREWDRIVER
PISTOL GRIP / ADJUSTABLE CLUTCH / REVERSIBLE
SCREW CAPACITY
TORQUE
FREE SPEED
AV AIR CONS
AIR INLET SIZE
NET WEIGHT
210mm
142mm
Similar tool to AL-1214 but with slower speed and increased torque for heavier
work such as large wood screws and slower run-down in normal work.
SHEAR
AL-1953
DOUBLE BLADE SHEAR
POLYMER BODY COVER / VARIABLE SPEED /
SWIVEL EXHAUST
CUTTING CAPACITY
SPEED
STROKE LENGTH
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
0.9mm
2600spm
6mm
340L/min 12cfm
1/4”NPT
0.9kg
38mm
257mm
56mm
Straight body, double blade shear for cutting and trimming sheet plastics, aluminum, tin plate and other
sheet metals. Often used for auto body repairs, duct manufacture and most sheet metal work.
For spare Left Outer Blade, order C1200-42
For spare Centre Blade, order C1200-43
For spare Right Outer Blade, order C1200-45
ALLIANCE AIR TOOLS
WIDTH
8mm
16Nm 11.8ft lb
800rpm
114L/min 4cfm
¼”NPT
1.23kg
41mm
For Air Tool OIl see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-25
SPRAY GUNS
AL-1015
AL-1008
SPRAY GUNS
26
GRAVITY FEED, TOUCH UP SPRAY GUN
155mm
CUP CAPACITY
NOZZLE SIZE
300mm
FLUID INLET
AIR INLET
AIR CONSUMPTION
AIR PRESSURE
WIDTH
UNDER BODY COATING GUN
250ml
1.2mm
3/8”NPT (M) NPT
¼”NPT (M) NPT
250L/min 8.8cfm
10-40psi
30mm
98mm
AVR-150 regulator
Available separately
Mini gravity feed spray gun for small touch up jobs.
Standard with 1.2mm nozzle but 0.8mm and 1.0mm
nozzles available separately.
WITH 700MM WAX INJECTOR TUBE
249mm
MAX AIR PRESSURE
WIDTH
70 psi
50mm
Spray gun for coating bitumen paints, etc.
on mud flaps and under auto bodies.
ALLIANCE AIR TOOLS
AL-1020
Accessories:
Pressure Regulator AVR-150
0.8mm Nozzle,
C108
1.0mm Nozzle,
AL-1018
147mm
AL-1070
162mm
155mm
330mm
288mm
HIGH EFFICIENCY GRAVITY FEED
SPRAY GUN
CUP CAPACITY
NOZZLE SIZE
FLUID INLET
AIR INLET
AIR CONSUMPTION
AIR PRESSURE
WIDTH
600ml
1.4mm
3/8”NPT (M) NPT
¼”NPT (M) NPT
312L/min 11cfm
50-60psi
106mm
Gravity feed spray gun, ideal for automotive,
furniture and most general purpose spraying.
Comes standard with 1.4mm nozzle but 1.7mm
and 2.0mm nozzles, kits are available separately.
Accessories:
1.7mm Nozzle Kit, C1020-NS4
2.0mm Nozzle Kit, C1020-NS1
292mm
HIGH PRODUCTION SPRAY GUN
CUP CAPACITY
NOZZLE SIZE
FLUID INLET
AIR INLET
AIR CONSUMPTION
AIR PRESSURE
WIDTH
1Litre
1.8mm
3/8”NPT (M) NPT
¼”NPT (M) NPT
340L/min 12cfm
30-70psi
105mm
Suitable for general purpose automotive and
industrial spray work. Comes standard with
1.8mm nozzle.
For 1.8mm Nozzle Kit, order C1018-NS1.8
PROFESSIONAL QUALITY
FINISHING SPRAY GUN
CUP CAPACITY
NOZZLE SIZE
FLUID INLET
AIR INLET
AIR CONSUMPTION
AIR PRESSURE
WIDTH
1Litre
2.0mm
3/8”nps (M) NPT
¼”nps (M) NPT
340L/min 12cfm
50-70ps
106mm
Better quality spray gun than AL-1018 with air
regulator in the handle. Comes standard with
2.0mm nozzle but 1.5 and 2.5mm nozzles are
available separately.
Accessories:
1.5mm Nozzle Kit, C1070-NS1
2.0mm Nozzle Kit, C1070-NS2
2.5mm Nozzle Kit, C1070-NS3
Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-26
Specifications subject to change without notice. E&OE. ©
STAPLERS
AT-3330
AT-3302
27
231mm
STAPLER - 6000 SERIES
TAKES 800 SERIES STAPLES
TAKES 6000 SERIES STAPLES
185mm
148mm
TOOL WIDTH
CAPACITY
CROWN WIDTH
WIRE GAUGE
STAPLERS / TYRE BUFF
220mm
STAPLER - 800 SERIES
45mm
6-16mm
12.9mm
21
TOOL WIDTH
CAPACITY
CROWN WIDTH
WIRE GAUGE
Popular stapler used in the furniture manufacturing
and upholstery industries for fastening thin
materials. Applications include motor trimming,
stapling backs onto kitchen cupboards and
furniture, grill cloth on entertainment units, etc.
50mm
10-25mm
5.7mm
18
AT-3330 is also commonly used in furniture and
upholstery operations. Applications include
cabinet making, drawer assembly, motor trimming,
and bedding manufacture as well as insulation
installation.
5.7mm
Staples to suit AT-3330
6010 - 10mm
6013 - 13mm
6016 - 16mm
6019 - 19mm
6022 - 22mm
6025 - 25mm
12.9mm
6-16mm
Staples supplied in boxes of 5000
10-25mm
Staples supplied in boxes of 5000
TYRE BUFF
AL-1213
STRAIGHT GRIP TYRE BUFF
QUICK CHANGE CHUCK & MANDREL / VARIABLE SPEED /
POLYMER BODY COVER / SWIVEL EXHAUST
FREE SPEED
AV. AIR CONS
MAX AIR CONS
AIR INLET SIZE
WEIGHT
WIDTH
2600rpm
85L/min 3cfm
340L/min 12cfm
¼”NPT
1kg
40mm
210mm
40mm
Tyre buff used extensively in the tyre repair industry.
ALLIANCE AIR TOOLS
Staples to suit AT-3302:
806 - 6mm
808 - 8mm
810 - 10mm
812 - 12mm
814 - 14mm
816 - 16mm
For spare chuck, order C1213-29
For spare Mandrel, order C1213-30
Enquire about quantity buys for Staples, Enquire about Rasps for Tyre Buffs, For Air Tool OIl see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
A-27
TYRE INFLATORS
AL-3400
28
TYRE INFLATORS / VACUUM/BLOWER
CLIP-ON TYRE INFLATOR
MULTISCALE GAUGE / DEFLATOR BUTTON
218mm
AIR INLET SIZE
¼”NPT
NET WEIGHT
0.338kg
MAX OPERATING PRESSURE 150psi, 1050kPa
OVER ALL LENGTH
500mm
WIDTH
35mm
130mm
Mainly used for home and general use. Clip on chuck.
AL-3403
HEAVY DUTY DUAL CHUCK TYRE INFLATOR
IMPERIAL / METRIC READER WITH DEFLATOR / SOLID
EXTRUDED ALUMINUM CASING
255mm
AIR INLET SIZE
¼”NPT
1.088kg
MAX OPERATING PRESSURE 150psi, 1050kPa
OVER ALL LENGTH
710mm
WIDTH
58mm
75mm
NET WEIGHT
For fully calibrated “Driveway” model order AL-3404
AL-3405
245mm
ALLIANCE AIR TOOLS
DIGITAL TYRE INFLATOR
DIGITAL DISPLAY
115mm
AIR INLET SIZE
¼”NPT
NET WEIGHT
0.46kg
MAX OPERATING PRESSURE 160psi, 1103kPa
OVER ALL LENGTH
750mm
Digital display for accurate and easy reading
VACUUM / BLOWER
AL-1620
VACUUM/BLOWER
AIR OPERATED / QUICK CHANGE VAC/BLOW LEVER
AIR CONS
NET WEIGHT
HOSE LENGTH
WIDTH
102L/min 3.6cfm
0.50kg
1200mm
50mm
Used for general clean-up of work pieces,
machines and general work areas. Supplied with
four attachments.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
A-28
Specifications subject to change without notice. E&OE. ©
SECTION B
KUANI
IMPACT
WRENCHES
•
Kuani is a quality manufacturer in Taiwan who, before
introducing their own brand, produced air tools for a leading
supplier of compressed air products in USA.
•
Kuani Impact Wrenches have proved their quality and
reliability for over ten years in the demanding Australian
Tyre Industry.
•
A full range of spare parts is available for Kuani tools and
there are Kuani Service Agents throughout the country.
IMPACT WRENCHES
CONTENTS - KUANI
TOOLS
Impact Wrench
Impact Wrench
Impact Wrench
Impact Wrench
Impact Wrench
PAGE
3/8” Square Drive
3
1/2” Square Drive
3
3/4” Square Drive
4
1” Square Drive
5
1½” Square Drive
7
KUANI
CONTENTS
2
B-2
Specifications subject to change without notice. E&OE. ©
IMPACT WRENCHES
KI-311J
KI-859
3
180mm
165mm
190mm
3/8” SQ.DR. IMPACT WRENCH
1/2” SQ.DR. IMPACT WRENCH
JUMBO HAMMER / HANDLE EXHAUST
TWIN HAMMER / HANDLE EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
8mm
271Nm 200ft lb
71L/min 2.5cfm
¼”NPT
3/8” ID
1.35kg
70mm
Powerful lightweight 3/8” impact wrench for a wide range of applications
including appliance and machine assembly, automotive repairs, motor
assembly and repairs.
KI-859-2
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
IMPACT WRENCHES
150mm
16mm
814Nm 600ft lb
113L/min 4cfm
¼”NPT
3/8” ID
2.80kg
70mm
Heavy duty impact wrench for automotive, industrial and farm use.
KI-859K
180mm
235mm
190mm
190mm
2” EXTENDED ANVIL 1/2” SQ.DR. IMPACT WRENCH
1/2” SQ.DR. IMPACT WRENCH KIT
TWIN HAMMER / HANDLE EXHAUST
TWIN HAMMER / HANDLE EXHAUST
BOLT CAPACITY
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
16mm
814Nm 600ft lb
113L/min 4cfm
¼”NPT
3/8” ID
2.96kg
70mm
Same as KI-859 but with 2” extended anvil for easier access into recessed wheels
and other confined spaces. Also takes double ended sockets for quick size changes
in the Tyre Industry.
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
16mm
814Nm 600ft lb
113L/min 4cfm
¼”NPT
3/8” ID
2.96kg
70mm
KI-859 supplied in a kit with a range of impact sockets.
KUANI
MAX TORQUE
For Impact Sockets see pages L-8, L-9 For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
B-3
IMPACT WRENCHES
KI-8571
KI-8571-2
KI-23
IMPACT WRENCHES
4
210mm
195mm
195mm
1/2” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER / HANDLE EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
19mm
949Nm 700ft lb
119L/min 4.2cfm
¼”NPT
3/8” ID
2.86kg
63mm
Powerful heavy duty impact wrench delivering
a huge 813Nm maximum torque. Ideal for
use in heavy industrial workshops, heavy tyre
shops and construction applications.
KI-23-6
2” EXTENDED ANVIL 1/2”
SQ. DR. IMPACT WRENCH
PATENTED TWIN HAMMER / HANDLE EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
19mm
949Nm 700ft lb
119L/min 4.2cfm
¼”NPT
3/8” ID
2.97kg
63mm
Same as KI-8571 but with 2” extended anvil
for easier access into recessed wheels and
other confined spaces. Also takes double
ended sockets.
KI-23K
340mm
PATENTED TWIN HAMMER / HANDLE EXHAUST
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
Same as KI-23 but with 6” extended anvil for
easier access into recessed wheels and other
confined spaces.
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
25mm
1085Nm 800ft lb
198L/min 7cfm
¼”NPT
1/2” ID
4.55kg
75mm
A heavy duty ¾” impact wrench for operation
in many construction, industrial, automotive
and farm applications. Uses include pipeline
construction, heavy vehicle tyres and service,
steel and concrete erection, heavy machinery
maintenance and repair.
240mm
PATENTED TWIN HAMMER / HANDLE EXHAUST
MAX TORQUE
BOLT CAPACITY
210mm
3/4” SQ.DR. IMPACT
WRENCH KIT
25mm
1085Nm 800ft lb
198L/min 7cfm
¼”NPT
1/2” ID
4.99kg
75mm
PATENTED TWIN HAMMER / HANDLE EXHAUST
210mm
6” EXTENDED ANVIL 3/4” SQ.
DR. IMPACT WRENCH
BOLT CAPACITY
3/4” SQ.DR. IMPACT WRENCH
KI-30
230mm
210mm
KUANI
230mm
235mm
180mm
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
25mm
1085Nm 800ft lb
198L/min 7cfm
¼”NPT
1/2” ID
4.55kg
75 MM
KI-23 in a kit with a range of impact sockets.
3/4” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER / HANDLE EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
30mm
1492Nm 1100ft lb
269L/min 9.5cfm
3/8 NPT
1/2” ID
5.60kg
90mm
Very heavy duty ¾” impact wrench for heavy
operation in construction, industrial, automotive
and farm applications. Uses are similar to
KI-23 but where they are more demanding
and requiring more power and torque.
For Impact Sockets see pages L-9, L-10 For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
B-4
Specifications subject to change without notice. E&OE. ©
IMPACT WRENCHES
KI-30-6
KI-35-3
5
IMPACT WRENCHES
325mm
240mm
6” EXTENDED ANVIL 3/4”
IMPACT WRENCH
3” EXTENDED ANVIL 3/4”
SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER / HANDLE EXHAUST
PATENTED TWIN HAMMER
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
30mm
1491Nm 1100ft lb
269L/min 9.5cfm
3/8” NPT
1/2” ID
6.52kg
90mm
Same as KI-30 but with 6” extended anvil for
easier access into recessed wheels and other
confined spaces.
KI-32
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
430mm
190mm
36mm
2033Nm 1500ft lb
269L/min 9.5cfm
1/2” NPT
3/4” ID
10.05kg
225mm
3” extended anvil for easier access into
confined spaces.
KI-32-6
KI-36
215mm
380mm
390mm
240mm
240mm
1” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER / HANDLE EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
WEIGHT
WIDTH
PATENTED TWIN HAMMER / HANDLE EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
Same as KI-30 but with a 1” anvil. The main
use for this tool is under heavy equipment
where access is limited. Typical uses are
U-bolts and springs on heavy truck and bus
suspensions, off road equipment, end loaders,
scrapers, heavy duty farm equipment and
large diesel engines.
32mm
1627Nm 1200ft lb
269L/min 9.5cfm
3/8” NPT
1/2” ID
6.52kg
90mm
Same as KI-32 but with 6” extended anvil, this
wrench has many applications similar to KI-32
but where deep recesses are involved.
1” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
36mm
2441Nm 1800ft lb
312L/min 11cfm
1/2” NPT
3/4” ID
9.6kg
212mm
A heavy duty tool for heavy production
work such as steel erection, heavy
equipment assembly / disassembly, mining,
pipeline construction, refineries, oil rigs,
petrochemical plants, etc.
KUANI
AIR HOSE RQD
32mm
1627Nm 1200ft lb
269L/min 9.5cfm
3/8” NPT
1/2” ID
5.64kg
90mm
6” EXTENDED ANVIL
1” SQ.DR. IMPACT WRENCH
175mm
For Impact Sockets see pages L-10, L-11 For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
B-5
IMPACT WRENCHES
KI-36-6
KI-38P-6
KI-38P
IMPACT WRENCHES
6
295mm
475mm
535mm
305mm
175mm
6” EXTENDED ANVIL
1” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
305mm
1” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER
BOLT CAPACITY
36mm
2441Nm 1800ft lb
312L/min 11cfm
1/2” NPT
3/4” ID
11.30kg
215mm
Same as KI-36 but with 6” extended
anvil, this tool is used extensively in heavy
truck tyre shops where the extended anvil
facilitates work on dual wheels.
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
38mm
2441Nm 1800ft lb
340L/min 12cfm
1/2” NPT
3/4” ID
10.62kg
217mm
Heavy duty pistol impact wrench with uses
similar to KI-32 but has 50% more torque
for applications that are more demanding.
Pistol grip impact wrenches are ideal for
jobs where room is restricted.
KI-38
6” EXTENDED ANVIL
1” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
38mm
2441Nm 1800ft lb
340L/min 12cfm
1/2” NPT
3/4” ID
11.82kg
217mm
Same as KI-38P but with 6” extended
anvil for applications where deep recesses
are involved.
KI-38-6
590mm
375mm
175mm
175mm
1” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER
BOLT CAPACITY
KUANI
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
38mm
2441Nm 1800ft lb
340L/min 12cfm
1/2” NPT
3/4” ID
10.62kg
195mm
6” EXTENDED ANVIL
1” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
Similar tool to KI-36 but with 400Nm more
torque for more demanding applications.
38mm
2441Nm 1800ft lb
340L/min 12cfm
1/2” NPT
3/4” ID
12.50kg
195mm
Extended anvil version of KI-38 for easier
access into deep recesses including dual
wheels on heavy trucks and equipment.
For Impact Sockets see page L-11 Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
B-6
Specifications subject to change without notice. E&OE. ©
IMPACT WRENCHES
KI-40
KI-40-8
KI-45
7
215mm
200mm
200mm
1” SQ.DR. IMPACT WRENCH
8” EXTENDED ANVIL
1” SQ.DR. IMPACT WRENCH
1” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER
PATENTED TWIN HAMMER
PATENTED TWIN HAMMER
BOLT CAPACITY
40mm
2712Nm 2000ft lb
374L/min 13.2cfm
1/2” NPT
3/4” ID
12.96kg
220mm
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
BOLT CAPACITY
40mm
2712Nm 2000ft lb
374L/min 13.2cfm
1/2” NPT
3/4” ID
16.50kg
220mm
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
BOLT CAPACITY
45mm
3390Nm 2500ft lb
411L/min 14.5cfm
1/2” NPT
3/4” ID
15.30kg
245mm
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
Powerful tool for very heavy applications in
construction, mining and petrochemical plants.
Same as KI-40 but with 8” extended anvil
for access into deep recesses and wheels.
Super heavy duty 1” impact wrench
delivering a huge maximum torque of
3388Nm to meet the heaviest and most
demanding applications in 1” drive.
KI-45-8
KI-55
KI-55-8
665mm
450mm
640mm
205mm
215mm
8” EXTENDED ANVIL
1” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER
BOLT CAPACITY
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
45mm
3390Nm 2500ft lb
411L/min 14.5cfm
1/2” NPT
3/4” ID
16.80kg
225mm
Extended anvil version of KI-45 for access
into deep recesses and confined spaces.
205mm
1-1/2” SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
50mm
4068Nm 3000ft lb
453L/min 16cfm
1/2” NPT
3/4” ID
19.70kg
245mm
Powerful, super heavy duty impact wrench for
a wide variety of applications in heavy motor
vehicle plants, mines, refineries, petrochemical
plants, steel erection and steel mills.
8” EXTENDED ANVIL 1-1/2”
SQ.DR. IMPACT WRENCH
PATENTED TWIN HAMMER
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET
AIR HOSE RQD
WEIGHT
WIDTH
50mm
4068Nm 3000ft lb
453L/min 16cfm
1/2” NPT
3/4” ID
22.81kg
245mm
Same as KI-55 but with 8” extended
anvil for access into deep recesses and
confined spaces.
KUANI
MAX TORQUE
IMPACT WRENCHES
410mm
610mm
395mm
For Impact Sockets see pages L-11, L-12 For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
B-7
KUANI
8
B-8
Specifications subject to change without notice. E&OE. ©
SECTION C
DRILLS
GRINDERS
HAMMER
IMPACT WRENCHES
RATCHET WRENCHES
NUTRUNNERS
RIVET NUT TOOLS
RIVETERS
SANDERS
SAWS
SCREWDRIVERS
SCREW TIGHTENING
SYSTEMS
SPECIALTY TOOLS &
ACCESSORIES
TAPPERS &
ACCESSORIES
I.A.T.
AIR TOOLS
•
The I.A.T. range of Air Tools is sourced from quality
manufacturers in Japan and Taiwan.
•
Each tool in the range has been selected on the basis
that it meets the needs of Australian manufacturers for a
particular application.
•
I.A.T. Air Tools are backed by spare parts availability and
Service Agents Australia wide.
CONTENTS - IAT AIR TOOLS
TOOLS
IAT AIR TOOLS
CONTENTS
2
C-2
PAGE
Drill
Pistol
3
Drill
D-Handle
3
Grinder
Mini
4
Grinders
Die
4
Grinders
Horizontal
4
Hammer
Pistol
5
Impact Wrenches
1/2” Square Drive
5
Impact Wrenches
3/4” Square Drive
6
Impact Wrenches
1” Square Drive
6
Ratchet Wrenches
Through Type
6
Nutrunners
Angle
7
Rivet Nut Tools
M6 Capacity
8
Rivet Nut Tools
M10 Capacity
8
Rivet Nut Tools
M12 Capacity
8
Rivet Nut Tools
1/2” Capacity
9
Riveters
3/16” Capacity
10
Riveters
1/4” Capacity
10
Riveters
5/16” Capacity
10
Sanders
Dual Action
11
Sanders
Geared Head
11
Saws
Sabre
12
Saws
Circular
12
Screwdrivers
Auto Shut-Off, Straight
13
Screwdrivers
Auto Shut-Off, Angle
14
Screwdrivers
Slip Clutch, Pistol
14
Screwdrivers
Electric Auto Shut-Off
15
Screwdrivers
Screw Tightening
Systems
Screw Tightening
Systems
Screw Tightening
Systems
Specialty Tools
Oil Pulse
Screw Counter
16
Specialty Tools
Pin Stripe Remover
19
Specialty Tools
Clean & Strip Tools
19
Specialty Tools
Accessories
20
Tappers
M12 Capacity
21
Tappers
M12 Tapping Machine
21
Tappers
Rotating Tool Holder
21
Digital Torque Meters
Tightening Management
Systems
Grease Gun Kit
Specifications subject to change without notice. E&OE. ©
16
17
18
19
DRILLS
IAT-1539
3
DRILLS
R
6MM COMPACT PISTOL DRILL
LIGHT WEIGHT / COMPOSITE BODY
DY /
REVERSIBLE / KEYED 3/8" CHUCK
CK
DRILLING CAPACITY
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
6mm
1600rpm
283L/min 10cfm
1/4"
0.7kg
36mm
195mm
160mm
Compact, lightweight drill featuring a soft resin grip handle for
increased control and comfort. The size and weight of the tool
make it ideal for production drilling of small diameter holes in
sheet metal for pop rivets, solid rivets and self tapping screws.
IAT-1568
REVERSIBLE / KEYED CHUCK /
SIDE HANDLE / SIDE EXHAUST
DRILLING CAPACITY
FREE SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
420mm
19mm
1000rpm
424L/min 15cfm
3/8” NPT
6.3kg
79mm
Powerful ¾” drill for large drilling applications such as in metal
fabrication shops, shipyards and oil, gas & mining workshops.
IAT AIR TOOLS
19MM D-HANDLE DRILL
For Drill Chucks see page L-19, For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
C-3
GRINDERS
IAT-2012
IAT-2025S
2025S
GRINDERS
4
145mm
52mm
190mm
MINI ANGLE DIE GRINDER
1/4” DIE GRINDER
ROLL THROTTLE / REAR EXHAUST
OIL FREE MOTOR / COMPOSITE BODY / LOCK-ON
THROTTLE SWITCH / REVERSIBLE
STD COLLET
FREE SPEED
AIR CONS
AIR INLET SIZE
HOSE LENGTH
NET WEIGHT
WIDTH
3mm, 1/8”
45000rpm
160L/min 6cfm
1/4”
1500mm
0.1kg
20mm
STD COLLET
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
NET WEIGHT
WIDTH
Lightweight mini grinder for engraving and fine
or intricate metal removal with small carbide
burs or mounted points. The angle head gives
easier access to awkward areas.
40mm
1/4”
8mm, 6mm, 1/8”, 3mm
25000rpm
280L/min 9.9cfm
0.55kg
36mm
New model die grinder with composite body to reduce weight and
vibration. Oil free motor reduces noise and energy consumption as well as
eliminating daily lubrication and oil in the exhaust. The lock-on throttle is
an advantage where the grinder is being used for extended periods. Also
features a reverse function where it is preferable to send the sparks and
grinding waste out in the opposite direction when using stones.
WARNING: Special care is needed in setting up this tool.
IAT-2025SN
IAT-2280L
IAT AIR TOOLS
190mm
IAT-2280R
425mm
40mm
380mm
130mm
130mm
1/4” DIE GRINDER
75MM HORIZONTAL GRINDER
75MM HORIZONTAL GRINDER
OIL FREE MOTOR / COMPOSITE BODY /
REVERSIBLE
ALUMINIUM BODY / SIDE EXHAUST /
SAFETY LEVER THROTTLE
ALUMINIUM BODY / SIDE EXHAUST /
ROLL THROTTLE
STD COLLET
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
NET WEIGHT
WIDTH
1/4”
8mm, 6mm, 1/8”, 3mm
25000rpm
280L/min 9.9cfm
0.55kg
36mm
Similar to IAT-2025S but without lock on
slide switch. This is a better option where
the use is not so constant.
SPINDLE SIZE
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
3/8”-24 UNF
12000rpm
852L/min 30cfm
1/4” NPT
2.0kg
3” horizontal grinder used for a variety
of grinding and cleaning applications in
many industries including machinery and
equipment shops, fabrication, foundries, die
shops, shipyards, etc.
125 and 150mm models also available.
SPINDLE SIZE
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
3/8”-24 UNF
12000rpm
852L/min 30cfm
1/4” NPT
2.27kg
Same as IAT-2280L but with roll throttle
instead of lever throttle which reduces
operator fatigue on long grinds.
WARNING: Special care is needed in
setting up this tool.
For Carbide Burs see Section N, Enquire about abrasives for these tools. Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
C-4
Specifications subject to change without notice. E&OE. ©
HAMMER
IAT-2511
5
AIR HAMMER
41MM STROKE
BLOWS / MIN
AV. AIR CONS
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10.2mm (0.401") dia.
4500
113L/min 4cfm
283L/min 10cfm
1/4” NPT
1.12KG
50MM
135mm
172mm
A general purpose tool used for stripping, cleaning, driving bushes, rivet
setting and bolt cutting, etc. Recommended for situations where the use
is not too demanding or constant. Takes the Alliance quick change chisel
attachment and Alliance needle scaler attachment for weld dressing.
Uses the Alliance range of 10.2mm shank automotive chisels.
IMPACT WRENCHES
IAT-8010
HAMMER / IMPACT WRENCHES
SHANK SIZE
½” COMPACT PISTOL IMPACT WRENCH
TWIN HAMMER CLUTCH / HANDLE EXHAUST
BOLT CAPACITY
MAXIMUM TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
126mm
16mm
678Nm 500ft lb
163L/min 6cfm
¼” NPT
1.6kg
58mm
188mm
Very compact ½” impact wrench, ideal for areas where access is limited. The heavy
duty body and mounting lug for a tool balancer make it ideal for assembly and
repair work in bench and factory situations as well as the agricultural, industrial,
automotive and mining industries.
Also Available: IAT8008 3/8" SQ. DR.
IAT AIR TOOLS
IAT-8012
½” PISTOL IMPACT WRENCH
TWIN HAMMER CLUTCH / LIGHTWEIGHT
POLYMER MOTOR HOUSING
BOLT CAPACITY
WORKING TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
19mm
813Nm 600ft lb
226L/min 8cfm
¼” NPT
2.0kg
70mm
195mm
185mm
New lightweight impact wrench with a big 813Nm of
working torque. Ideal for automotive, industrial, and
construction applications.
For Chisels see pages from L-16, For Impact Sockets see page L-9, For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
C-5
IMPACT & RATCHET WRENCHES
IAT-8025
IAT-8019
IMPACT & RATCHET WRENCHES
6
240mm
240mm
225mm
225mm
¾” PISTOL IMPACT WRENCH
1” PISTOL IMPACT WRENCH
TWIN HAMMER CLUTCH / LIGHTWEIGHT
POLYMER MOTOR HOUSING
TWIN HAMMER CLUTCH / LIGHTWEIGHT
POLYMER MOTOR HOUSING
BOLT CAPACITY
WORKING TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
25mm
1356Nm 1000ft lb
340L/min 12cfm
3/8” NPT
3.8kg
87mm
BOLT CAPACITY
WORKING TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Heavy duty ¾” impact wrench with composite handle and
motor housing which reduces weight and absorbs vibration.
32mm
1382Nm 1020ft lb
340L/min 12cfm
3/8” NPT
4.0kg
87mm
Heavy duty 1” impact wrench with composite handle and motor housing which
reduces weight and absorbs vibration. Uses are mainly for heavy equipment
and machinery assembly and maintenance.
IAT-8512
IAT-8514
IAT AIR TOOLS
335mm
292mm
49mm
46mm
THROUGH RATCHET WRENCH
THROUGH RATCHET WRENCH
SIDE EXHAUST / CHOICE OF A/F SIZES
SIDE EXHAUST / CHOICE OF A/F SIZES
SOCKET INSERT OPTIONS
FREE SPEED
MAX. TORQUE
AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
SOCKET INSERT OPTIONS
6, 7, 8, 9, 10, 11, 12mm
120rpm
10Nm 7.4ft lb
127L/min 4.5cfm
¼” NPT
1.3kg
46mm
Ring type ratchet wrench for tightening operations in
confined spaces or where long studs or threaded rods are
involved. Ideal for assembly applications. Chosen insert
must be ordered with tool.
FREE SPEED
MAX. TORQUE
AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10, 11, 12, 13, 14mm
170rpm
25Nm 18.4ft lb
212L/min 7.5cfm
¼” NPT
1.8kg
49mm
Similar tool to IAT-8512 but with rear exhaust, larger sized
sockets and increased capacity. Chosen insert must be
ordered with tool.
For Impact Sockets see pages L-10, L-11 Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
C-6
Specifications subject to change without notice. E&OE. ©
NUTRUNNERS
IAT-3080
7
OIL FREE MOTOR / LEVER THROTTLE
BOLT CAPACITY
TORQUE RANGE
FREE SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
9mm
3–18Nm
2.21-13.28ft lb
650rpm
550L/min 19.5cfm
1/4” NPT
1.45kg
37mm
355mm
55mm
NUTRUNNERS
3/8” RIGHT ANGLE TORQUE
SHUT-OFF NUTRUNNER
Lightweight torque shut-off nutrunner with an oil free motor which has the added advantage
of low maintenance and no reduction of performance due to low oil levels. Applications are
for all assembly and service processes that require torque ratings between 3 and 18Nm.
IAT-3081
3/8” RIGHT ANGLE TORQUE
SHUT-OFF NUTRUNNER
OIL FREE MOTOR / LEVER THROTTLE
BOLT CAPACITY
TORQUE RANGE
FREE SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
5–25Nm
3.69-18.44ft lb
430rpm
550L/min 19.5cfm
1/4” NPT
1.45kg
37mm
355mm
55mm
Similar to IAT-3080 but with torque range of 5-25Nm.
3/8” RIGHT ANGLE TORQUE
SHUT-OFF NUTRUNNER
OIL FREE MOTOR / LEVER THROTTLE
BOLT CAPACITY
TORQUE RANGE
FREE SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
12mm
7-40Nm
5.16-29.5ft lb
290rpm
550L/min 19.5cfm
1/4” NPT
1.45kg
37mm
355mm
55mm
IAT AIR TOOLS
IAT-3082
Similar tool to IAT-3080 and IAT-3081 but with
torque range of 7-40Nm.
Enquire about Hexagon Sockets for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
C-7
RIVET NUT TOOLS
IAT-3523
IAT-3524
RIVET NUT TOOLS
8
200mm
210mm
139mm
145mm
M6 ROTARY RIVETT NUT TOOL
M5 - M6 CAPACITY / SIDE EXHAUST /
QUICK CHANGE RIVETING HEAD
MANDREL SIZES
FREE SPEED
AIR CONSUMPTION
WORKING PRESSURE
AIR INLET
NET WEIGHT
M3, M4, M5, M6
(Steel) 5/32”,
3/16”, 1/4”
600rpm
198L/min 6cfm
90Psi
1/4” NPT
1.2kg
Pistol grip rivet nut tool for pulling M3 to M6 rivet nuts in steel. Used in
upholstery and furniture manufacture. Pistol grip models are often preferred
over other styles as they are compact and lighter in weight which makes
them more practical for applications where access is restricted. Also
reduces operator fatigue. Specify mandrel size when ordering.
IAT-3525
M10 ROTARY RIVET NUT TOOL
OOL
M6 - M10 CAPACITY / SIDE EXHAUST /
QUICK CHANGE RIVETING HEAD
MANDREL SIZES
FREE SPEED
AIR CONSUMPTION
WORKING PRESSURE
AIR INLET
NET WEIGHT
1/4”, 5/16”, 3/8”,
M6, M8, M10 (Steel)
450rpm
5cfm
90Psi
1/4” NPT
1.8kg
Similar tool to IAT-3523 but with extra capacity
to take up to M10 rivet nuts in steel. Specify
mandrel size when ordering.
IAT-3568
200mm
228mm
IAT AIR TOOLS
270mm
145mm
M12 ROTARY RIVET NUTT TOOL
M5 - M12 CAPACITY / SIDE EXHAUST
UST /
QUICK CHANGE RIVETING HEAD
MANDREL SIZES
FREE SPEED
AIR CONSUMPTION
WORKING PRESSURE
AIR INLET
NET WEIGHT
7/16”, M10, M12
(Steel)
100rpm
5cfm
90Psi
1/4” NPT
1.9kg
Similar tool to IAT-3524 but with extra capacity to take up
M12 rivet nuts. Specify mandrel size when ordering.
M10 AIR/ HYDRAULIC
RIVET NUT TOOL
M4 - M10 CAPACITY / MANUAL REVERSE
ERSE /
SUPPLIED WITH A RANGE OF MANDRELS
ELS
MANDREL SIZES
AIR PRESSURE
AIR INLET
NET WEIGHT
WIDTH
M4, M5, M6, M8,
M8
M10
85Psi
1/4” NPT
1.5kg
78mm
Quality rivet nut tool suitable for fastening rivet nuts up to M10 in
aluminium, steel and stainless steel. All mandrels included with tool.
Used in many industries where rivet nuts are used including auto
trimming, furniture and automotive body manufacture. Made in Japan.
Enquire about Rivet Nuts for these tools. Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
C-8
Specifications subject to change without notice. E&OE. ©
RIVET NUT TOOLS
IAT-3571M
IAT-3571I
9
317mm
278mm
278mm
M12 AIR / HYDRAULIC RIVET NUT TOOL
1/2” AIR / HYDRAULIC RIVET NUT TOOL
M3 – M12 CAPACITY / REVERSIBLE / SUPPLIED IN A CARRY
CASE WITH A RANGE OF MANDRELS / POLYMER BODY
M6 – ½” CAPACITY / REVERSIBLE / SUPPLIED IN A CARRY CASE
WITH A RANGE OF MANDRELS / POLYMER BODY
MANDREL SIZES
M3, M4, M5, M6, M8,
M10, M12
TRACTION POWER
2176kg
AIR CONSUMPTION
125L/min 4.4cfm
WORKING AIR PRESSURE 85-95Psi
AIR INLET
1/4” NPT
NET WEIGHT
2.45kg
Rivet nut tool with capacity M3 up to M12 all in a plastic carry
case. Reverse feature saves the operator from manually reversing
the mandrel off the rivet nut which saves time and reduces
operator fatigue.
IAT-3573M
RIVET NUT TOOLS
317mm
MANDREL SIZES
#6, #8, #10, ¼”,
5/16”, 3/8”, ½”
TRACTION POWER
2176kg
AIR CONSUMPTION
125L/min 4.4cfm
WORKING AIR PRESSURE 85-95Psi
AIR INLET
1/4” NPT
NET WEIGHT
2.45kg
Same tool as IAT-3571M but with metric and imperial mandrels.
IAT-3573I
335mm
335mm
406mm
406mm
1/2” AIR / HYDRAULIC RIVET NUT TOOL
M4 - M12 CAPACITY / REVERSIBLE / SUPPLIED IN A CARRY
CASE WITH A RANGE OF MANDRELS / POLYMER BODY
M6 – ½” CAPACITY / REVERSIBLE / SUPPLIED IN A CARRY CASE
WITH A RANGE OF MANDRELS / POLYMER BODY
MANDREL SIZES
M4, M5, M6, M8,
M10, M12
TRACTION POWER
2727kg
AIR CONSUMPTION
178L/min 6.3cfm
WORKING AIR PRESSURE 90-95Psi
AIR INLET
1/4” NPT
NET WEIGHT
3.95kg
Similar tool to IAT-3571 but with increased power.
MANDREL SIZES
#6, #8, #10, ¼”,
5/16”, 3/8”, ½”
TRACTION POWER
2727kg
AIR CONSUMPTION
178L/min 6.3cfm
WORKING AIR PRESSURE 90-95Psi
AIR INLET
1/4” NPT
NET WEIGHT
3.95kg
Same tool as IAT-3573M but with metric and imperial mandrels.
IAT AIR TOOLS
M12 AIR / HYDRAULIC RIVET NUT TOOL
Enquire about Rivet Nuts for these tools. For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
C-9
RIVETERS
IAT-3648
IAT-3664
10
184mm
RIVETERS
160mm
318mm
270mm
3/16” CAPACITY AIR /
HYDRAULIC RIVETER
STD NOSE PIECES
CAPACITY
TRACTION POWER
STROKE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
2.4mm (3/32”)
3.2mm (1/8”)
4.0mm (5/32”)
4.8mm (3/16”)
4.8mm (3/16”)
800kgs
13.5mm
114L/min 4cfm
1/4” NPT
1.45kg
78mm
1/4” CAPACITY AIR /
HYDRAULIC RIVETER
STD NOSE PIECES
CAPACITY
TRACTION POWER
STROKE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Quality riveter that has the capacity to take
aluminium, steel, copper and stainless steel
rivets up to 3/16”. Made in Japan.
IAT-3681
3.2mm (1/8”)
4.0mm (5/32”)
4.8mm (3/16”)
6.0mm (7/32”)
6.4mm (1/4”)
6.4mm (1/4”)
1250kg
16mm
227L/min 8cfm
1/4” NPT
2.1kg
90mm
Quality riveter that has the capacity to take
aluminium, steel, copper and stainless steel
rivets up to ¼”. Made in Japan.
IAT-3683
330mm
315mm
340mm
IAT AIR TOOLS
320mm
1/4” CAPACITY AIR /
HYDRAULIC RIVETER
POLYMER BODY
STD NOSE PIECES
CAPACITY
TRACTION POWER
STROKE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
4.8mm (3/16”)
6”)
32”)
5.6mm (7/32”)
6.4mm (¼”)
6.4mm (1/4”)
1723kg
25mm
113L/min 4cfm
1/4” NPT
2kg
110mm
5/16” CAPACITY AIR /
HYDRAULIC RIVETER
POLYMER BODY
STD NOSE PIECES
CAPACITY
TRACTION POWER
STROKE
AV. AIR CONS
AIR INLET SIZE
Heavy duty riveter with a long stroke which pulls larger
rivets in one trigger action. The high impact polymer
body is less prone to damage than aluminium and the
carry case also protects the tool when not in use.
NET WEIGHT
4.8mm (3/16”)
7.8mm (5/16”)
7.8mm (5/16”)
2040kg
25mm
113L/min 4cfm
1/4” NPT
2.1kg
Heavy duty riveter with a capacity of 7.8mm for
transport and structural work.
Enquire about Rivets for these tools. Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
C-10
Specifications subject to change without notice. E&OE. ©
SANDERS
IAT-4060
11
SANDERS
210mm
100mm
150MM CENTRAL VAC PALM GRIP SANDER
PLASTIC SKIRT
PAD SIZE
PAPER MOUNT
FREE SPEED
ORBIT DIA
MA X.AIR CONS
NET WEIGHT
WIDTH
150mm
Velcro or PSA
10,000rpm
5mm
453L/min 16cfm
0.8kg
150mm
Compact, light weight sander for use in many industries including
auto body repairs, fibreglass, furniture manufacture and finishing and
whitegoods. Central vacuum feature allows user to connect the sander
to a vacuum unit for a cleaner environment.
IAT-4088
290mm
115mm
IAT AIR TOOLS
200MM GEARED HEAD SANDER
PLASTIC SKIRT
PAD SIZE
PAPER MOUNT
FREE SPEED
MA X.AIR CONS
NET WEIGHT
WIDTH
200m
Velcro or PSA
850rpm
849L/min 30cfm
2.36kg
203mm
Low speed high torque positive drive sander for heavy sanding work
in larger areas. Gear mechanism increases power and reduces the
possibility of leaving circular patterns in the work.
For Backing Pads see page L-22, Enquire about abrasives for these tools. For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
C-11
SAWS
IAT-4504K
IAT-4531L
IAT-4531H
SAWS
12
248mm
248mm
410mm
57mm
57mm
180mm
SABRE SAW KIT
FREE SPEED
STROKE LENGTH
BLADE LENGTH
MAX. AIR CONS
AIR INLET SIZE
WEIGHT
WIDTH
50MM (2”) CIRCULAR SAW
FREE SPEED
1200spm
45mm
300mm
184L/min 6.5cfm
1/4” NPT
2.5kg
41mm
MAX CUTTING DEPTH
MAX. AIR CONS
AIR INLET SIZE
WEIGHT
WIDTH
620rpm
8mm
566L/min 20cfm
1/4” NPT
1.05kg
67mm
Small slow speed circular saw. With various
blades for cutting as follows:
150 tooth - M.S. to 1.2mm;
120 tooth - M.S. to 1.2mm Alum Copper,
Plastic, F.R.P. , Wood;
90 tooth - Alum, Copper, Plastic, F.R.P., Wood.
An ideal tool for straight or curve cutting
in materials such as sheet metal, plastics,
fibreglass and plywood. Can be used in sensitive
environments where electric tools are a hazard.
e.g. wet and potentially flammable areas.
IAT AIR TOOLS
IAT-4531D
50MM (2”) CIRCULAR SAW
FREE SPEED
MAX CUTTING DEPTH
MAX. AIR CONS
AIR INLET SIZE
WEIGHT
WIDTH
3500rpm
8mm
566L/min 20cfm
1/4” NPT
1.05kg
67mm
Similar tool to IAT-453IL but with a faster speed
for cutting with various blades as follows:
90 tooth - Plastic
60 tooth - F.R.P.
40 tooth - Wood
S
IAT-7280S
248mm
57mm
50MM (2”) CIRCULAR SAW
FREE SPEED
7000rpm
MAX CUTTING DEPTH 8mm
MAX. AIR CONS
566L/min 20cfm
AIR INLET SIZE
1/4” NPT
WEIGHT
1.05kg
WIDTH
67mm
Similar tool to the other 2 models but with a
free speed of 7000rpm for cutting, fibreglass,
carbon fibre, stone, graphite and ceramics with a
diamond blade.Standard diamond blades are for
dry cutting and slotted blades for wet cutting.
285mm
180MM (7 ¼”) CIRCULAR SAW
RETRACTABLE GUARD
245mm
FREE SPEED
4500rpm
AIR CONS
566L/min 20cfm
BORE SIZE
16mm
MA X CUT TING DEPTH 60mm
WEIGHT
4.76kg
WIDTH
230mm
Pneumatic circular saws are ideal for carpentry work on
construction sites where wet conditions prevent the use of
electric power saws as well as wet cutting of concrete, glass,
ceramics, brick and fibre cement board. Also used on road,
railway and military construction where compressed air is
readily available but not electricity.
Enquire about Blades for these tools. Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
C-12
Specifications subject to change without notice. E&OE. ©
SCREWDRIVERS
SCREWDRIVERS
IAT-5006S
In choosing a screwdriver for a particluar application there are a
number of different options to consider. Firstly, there are different
clutch types. In the IAT range, there are models with slip clutch
and auto shut off clutch. There is also a direct drive model
which has no clutch. These are best for wood screws and where
maximum torque is needed.
13
273mm
70mm
Auto shut off screwdrivers are the ideal tool where high levels
of torque accuracy and repeatability are required. These should
also be used in production situations where constant use is likely
to create operator fatigue due to a repeated torque reaction.
5MM STRAIGHT GRIP AUTO
SHUT OFF SCREWDRIVER
LEVER START / ¼” HEX. DRIVE / EXTERNALLY
ADJUSTABLE TORQUE SETTING
The clutch on these screwdrivers rapidly shuts off the air to the
motor when the preset torque is reached. This gives ±3% torque
accuracy, minimal transmitted reaction to the operator’s hand,
much lower wear on screwdriver bits and internal parts, lower
noise and vibration levels and reduced energy consumption.
SCREW CAPACITY
MAX TORQUE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
Screwdrivers are available as straight, pistol grip or angle head.
Straight screwdrivers are preferable for vertical work, pistol grip
for horizontal work and angle head for where access is restricted.
However, when working with torques above 6-7Nm, pistol grip
models are preferred over the straight grip as they offer superior
handling of the torque reaction.
NET WEIGHT
WIDTH
SCREWDRIVERS
The slip clutch is the best alternative when the joint varies from
one screw to another as is the case with self-tapping screws. The
slip clutch begins to slip when the set
torque is reached.
5mm
8Nm 5.9ft lb
1800rpm
125L/min 4.42cfm
1/4”
1.13kg
42mm
42m
5S
IAT-5045S
The other options to consider is whether the screwdriver should
be air or electric powered. If compressed air is available, this is
the best option. Air powered screwdrivers give high outputs in
relation to their weight and volume, they do not burn out or give
electric shocks and are less subject to theft. Electric models, on
the other hand, have the advantages of maximum cleanliness
and low installation cost.
6MM STRAIGHT GRIP
P AUTO
SHUT OFF SCREWDRIVER
The IAT range of air shut off screwdrivers have a soft resin handle
with a ‘wave’ patterned design for increased grip and comfort.
Push start models decrease operator time which is an advantage
in production lines. The air shut off screwdrivers are supplied
with 4 different coloured end caps which can be used as a colour
code system which is an advantage in production lines where
the same models are used for different processes and set to
different torque settings. This makes each tool easily identifiable
as to which process it is to be used for.
180mm
31mm
PUSH START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING
SCREW CAPACITY
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
WIDTH
IAT-5050S
6MM STRAIGHT GRIP AUTO
SHUT OFF SCREWDRIVER
215mm
39mm
PUSH START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING
SCREW CAPACITY
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
6mm
0.7-4.9Nm
0.5-3.6ft lb
1400rpm
550L/min 19.4cfm
1/4”
0.79kg
39mm
IAT AIR TOOLS
NET WEIGHT
6mm
0.8–3.9Nm
0.6–2.9ft lb
800rpm
300L/min 10.6cfm
1/4”
0.48kg
34mm
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
C-13
SCREWDRIVERS
IAT-5060S
IAT-5260A
IAT-5065S
SCREWDRIVERS
14
50mm
39mm
39mm
7MM STRAIGHT GRIP AUTO
SHUT OFF SCREWDRIVER
7MM ANGLE HEAD AUTO
SHUT OFF SCREWDRIVER
9MM STRAIGHT GRIP AUTO
SHUT OFF SCREWDRIVER
PUSH START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING
LEVER START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING
PUSH START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING
SCREW CAPACITY
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
7mm
1.5-9.3Nm
1.1-6.8ft lb
550rpm
550L/min 19.4cfm
1/4”
0.79kg
39mm
IAT-5265A
IAT AIR TOOLS
215mm
335mm
215mm
SCREW CAPACITY
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
7mm
1.5-9.3Nm
1.1-6.8ft lb
550rpm
550L/min 19.4cfm
1/4”
1.3kg
39mm
IAT-5310P
SCREW CAPACITY
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
9mm
3.0-17.6Nm
2.2-13.0ft lb
300rpm
600L/min 21.2cfm
1/4”
0.8kg
39mm
IAT-5311P
244mm
230mm
335mm
160mm
50mm
160mm
9MM ANGLE HEAD AUTO
SHUT OFF SCREWDRIVER
6MM PISTOL GRIP SLIP
CLUTCH SCREWDRIVER
8MM PISTOL GRIP SLIP
CLUTCH SCREWDRIVER
LEVER START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING
TRIGGER START / ¼” HEX. DRIVE / EXTERNAL
CLUTCH ADJUSTMENT
TRIGGER START / ¼” HEX. DRIVE / EXTERNAL
CLUTCH ADJUSTMENT
SCREW CAPACITY
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
9mm
3.0-17.6Nm
2.2-13.0ft lb
300rpm
600L/min 21.2cfm
1/4”
1.31kg
39mm
SCREW CAPACITY
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
6mm
2.5-9Nm
1.9-6.6ft lb
1800rpm
125L/min 4.42cfm
1/4”
1.31kg
50mm
SCREW CAPACITY
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
8mm
2.5-12Nm
1.9-8.8ft lb
800rpm
125L/min 4.42cfm
1/4”
1.43kg
50mm
Enquire about Spare Parts & Service.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
C-14
Specifications subject to change without notice. E&OE. ©
SCREWDRIVERS
IAT-5441P
AT-5441P
IAT-5447P
IAT-5455P
IAT-545
15
178mm
145mm
SCREWDRIVERS
178mm
210mm
145mm
155mm
5MM PISTOL GRIP AUTO
SHUT OFF SCREWDRIVER
6MM PISTOL GRIP AUTO
SHUT OFF SCREWDRIVER
7MM PISTOL GRIP AUTO
SHUT OFF SCREWDRIVER
TRIGGER START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING
TRIGGER START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING
TRIGGER START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING
SCREW CAPACITY
5mm
0.5-3.4Nm
0.4-2.5ft lb
1800rpm
280L/min 9.9cfm
1/4”
0.64kg
52mm
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
IAT-5465P
SCREW CAPACITY
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
SCREW CAPACITY
6mm
1.0-4.9Nm
0.7-3.6ft lb
1000rpm
280L/min 9.9cfm
1/4”
0.74kg
52mm
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
IAT-5675SE
7mm
1.2-7.3Nm
0.9-5.4ft lb
550rpm
550L/min 19.4cfm
1/4”
0.95kg
58mm
IAT-5685SE
Transformer
Transformer
265mm
265mm
39mm
155mm
39mm
9MM PISTOL GRIP AUTO
SHUT OFF SCREWDRIVER
5MM STRAIGHT GRIP AUTO SHUT
OFF ELECTRIC SCREWDRIVER
8MM STRAIGHT GRIP AUTO SHUT
OFF ELECTRIC SCREWDRIVER
TRIGGER START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING
PUSH START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING
PUSH START / COMPOSITE BODY / ¼” HEX.
DRIVE / ADJUSTABLE TORQUE SETTING/
BRUSHLESS MOTOR
SCREW CAPACITY
TORQUE RANGE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
9mm
3.0-17.6Nm
2.2-13.0ft lb
300rpm
550L/min 19.4cfm
1/4”
1.1kg
58mm
SCREW CAPACITY
TORQUE RANGE
VOLTAGE
FREE SPEED
NET WEIGHT
WIDTH
5mm
0.7-2.9Nm
0.5-2.1ft lb
30VDC
1000rpm
0.74kg
44mm
SCREW CAPACITY
TORQUE RANGE
VOLTAGE
FREE SPEED
NET WEIGHT
WIDTH
8mm
6.0 - 15.0Nm
4.4 - 11.0 ft-lb
40VDC
550rpm
1.2kg
52mm
IAT AIR TOOLS
210mm
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
C-15
SCREWDRIVER - OIL PULSE
IAT-7020
SCREWDRIVERS / SCREW TIGHTENING SYSTEMS
16
10MM SHUT-OFF OIL PULSE SCREWDRIVER
¼” HEX. DRIVE
173mm
SCREW CAPACITY
10mm
20 – 28Nm 14.8 – 20.7ft lb
7400rpm
450L/min 15.8cfm
1/4” NPT
1.43kg
52mm
TORQUE RANGE
FREE SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
200mm
Oil pulse screwdrivers are much more powerful than standard air shut-off
screwdrivers and have less vibrations than an impact driver. These tools are
used where a large capacity screwdriver is required for quick run-down precision
fastening. Applications include power product assembly and furniture manufacture.
SCREW TIGHTENING SYSTEMS
IAT-7540
280mm
250mm
300mm
SCREW COUNTER
IAT AIR TOOLS
TOUCH SCREEN / COUNTS SCREWS IN A PROCESS / MONITORS SCREW TIMES, TORQUE
AND ACCURACY OF SCREWS APPLIED BY A PNEUMATIC SCREWDRIVER
FEATURES
•
•
•
•
•
•
•
Counter has an advanced, patented Pressure and Time control
system which ensures precise data reading and collection.
An M5 signal port wire is no longer required which eliminates
the inconvenience of the wire and the possibility of false
readings if the wire breaks.
A flow controller is no longer needed as variations to the
operation sequence, if required, can be made by means of an
optional magnetic card.
Operation of the counter is now by means of a touch screen
which is much simpler and easier than the traditional dial and
push button system.
The system provides professional quality management of the
screwdriving operation by precisely monitoring the screwing
process and eliminating human errors.
Close management of the operation speeds up the
manufacturing time by eliminating unproductive screwing.
Monitoring the screwing process by means of the actual count
improves the quality and efficiency of the production line.
A screw counter gives a complete analysis of the screw data in a process. This is essential in production lines
where a particular quantity of screws are to be fitted to a particular torque setting. If the incorrect number of
screws are used or they are installed too tight or too loose the product will be faulty. The installation of a screw
counter helps to prevent this and ensure that all screws are applied as specified.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
C-16
Specifications subject to change without notice. E&OE. ©
SCREW TIGHTENING SYSTEMS
IAT-7515
IAT-7516
17
200mm
180mm
180mm
DIGITAL TORQUE METER
DIGITAL TORQUE METER
MEASURES UP TO 1.5NM
MEASURES UP TO 15NM
MEASURING RANGE
ACCESSORIES
•
•
•
•
•
•
•
•
Rechargeable battery
Auto power off without memory loss
USB inlet for computer link-up
800 data memory
One touch zero adjustment
Function shows high and low limits
Maximum, minimum and average screw data
Digital torque meter for measuring actual screw torques and setting
torque shut-off screwdrivers in production situations to ensure
accuracy and precision in tightening operations.
ACCESSORIES
FEATURES
0.10 - 15Nm
1.0 - 150kgf.cm
1.0 - 130in.lbf
•
•
•
•
•
•
IAT-7650 Test Joint
USB connector cable
M4 screw No.4, transfer bit No.4
240 Volt AC / DC adaptor
Calibration Results, Calibration Certificate
System Traceability Code
Protective case.
•
•
•
•
•
•
•
Rechargeable battery
Auto power off without memory loss
USB inlet for computer link-up
800 data memory
One touch zero adjustment
Function shows high and low limits
Maximum, minimum and average screw data
Same as IAT-7515 but with a capacity to measure up to 15Nm.
Test Joints
Test Joints
MODEL NO.
RANGE
MODEL NO.
RANGE
IAT-7640 (OPTIONAL)
0.02 - 2.4Nm
IAT-7640 (OPTIONAL)
0.02 - 2.4Nm
IAT-7650
0.15 - 1.0Nm
IAT-7650
0.15 - 1.0Nm
IAT-7660
0.5 - 4.9Nm
IAT-7660
0.5 - 4.9Nm
IAT-7670 ( OPTIONAL)
4.9 - 9.8Nm
IAT-7670 ( OPTIONAL)
4.9 - 9.8Nm
IAT - 7650
IAT - 7660
IAT - 7650
IAT AIR TOOLS
•
IAT-7650, IAT-7660 Test Joints
(4 bits HEX opposite side 6mm)
USB connector cable
M4 screw No.2, transfer bit No.4.
240 Volt AC / DC adaptor
Calibration Results, Calibration Certificate
System Traceability Code
Protective case
•
•
•
•
FEATURES
MEASURING RANGE
0.01-1.50Nm
0.10-15kgf.cm
0.10-13in.lbf
SCREW TIGHTENNG SYSTEMS
200mm
IAT - 7660
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
C-17
SCREW TIGHTENING SYSTEMS
IAT-7521 / IAT-7524 / IAT-7525
525 / IAT-7528
SCREW TIGHTENING SYSTEM
18
188mm
249mm
100mm
DIGITALISED TIGHTENING MANAGEMENT SYSTEMS
TEMS
4 MODELS AVAILABLE WITH POWER RATINGS TO SUIT MOST
ELECTRIC SCREWDRIVERS
FEATURES
•
•
•
•
•
•
•
•
Prevents any possibility of missing screws in a process
Prevents screws from being not fully tightened, over
tightened or stripping threads
Memory storage of up to 99 screw samples with all
accurate specifications
Regulates actual tightening to sample specifications
Regulates fine tuning to screwdriver clutch to specified
sample times
Code system prevents unauthorised modification of set data
Lock device prevents unauthorised operation
Counter records data of up to 60 000 screws
IAT AIR TOOLS
Digital data terminal for screw counting and tightening to a specified torque setting
and time. Ideal for production situations where time frames and torque settings are
crucial such as on whitegoods, electric and electronic assembly lines.
MODEL NO.
IAT-7521
IAT-7524 / IAT-7525
IAT-7528
TOTAL QUANTITATIVE COUNTING RANGE (PCS)
1-60 000
1-60 000
1-60 000
UNIT SET COUNTING RANGE (PCS)
1-99
1-99
1-99
SAMPLE SETTING RANGE (PCS)
1-99
1-99
1-99
SET MEMORY ( RECALL) ( SETS )
1-10
1-10
1-10
SAMPLE TIME SET R ANGE ( SEC. )
0.1-9.9
0.1-9.9
0.1-9.9
TIME TOLER ANCE SET R ANGE (+)
ç1-ç99
ç1-ç99
ç1-ç99
OK
Sound & Green LED
Sound & Green LED
Sound & Green LED
NG
Sound & Red LED
Sound & Red LED
Sound & Red LED
INDICATION
I/O
RS-232C Connector PLC
RS-232C Connector PLC
RS-232C Connector PLC
I/P
100-120V AC, 220-240VAC
100-120V AC, 220-240VAC
100-120V AC, 220-240VAC
O/P
35V DC, 30V DC
35V DC, 30V DC
35V DC, 30V DC
POWER ( INCLUDING ELECTRIC SCREWDRIVER )
50W
60W
75W
OVER ALL WEIGHT ( KG )
1.6
1.6
1.6
POWER SOURCE
( SWITCHING POWER SUPPLY )
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
C-18
Specifications subject to change without notice. E&OE. ©
SPECIALTY TOOLS & ACCESSORIES
IAT-6039K
IAT-6041
AT-6041
19
398mm
PIN STRIPE REMOVER
GREASE GUN KIT
TAKES 500CC CARTRIDGES / INCLUDES
MANUAL GUN HEAD FOR MANUAL DISPENSING
NG
RECOMMENDED
AIR PRESSURE
WIDTH
63mm
6.2Bar 90Psi
FREE SPEED
MAX. AIR CONS
68mm
AIR INLET SIZE
NET WEIGHT
Pneumatic grease gun for ease of operation in lubricating
and maintenance in automotive, industrial and farm
applications. Manual gun head included for manual
dispensing. This can be used either as a back-up tool or
where manual is preferred for greater control.
150mm
POLYMER BODY COVER / ADJUSTABLE
REAR EXHAUST / ADJUSTABLE ROTATABLE
SIDE HANDLE
4090rpm
510L/min 18cfm
1/4”NPT
1.12kg
Used in the automotive paint trade for the removal of pin
stripes, marks before painting. Also erases marks on
plastics and painted surfaces. Side handle provides added
control and rotates 180° for right handed or left handed use.
-6042
IAT-6042
IAT-6044
305mm
150mm
150mm
CLEAN AND STRIP TOOL
POLYMER BODY COVER / ADJUSTABLE REAR
EXHAUST / ADJUSTABLE ROTATABLE HANDLE
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
4090rpm
510L/min 18cfm
1/4”NPT
1.12kg
CENTRAL VAC. CLEAN
AND STRIP TOOL
POLYMER BODY COVER / ADJUSTABLE REAR
EXHAUST / ADJUSTABLE ROTATABLE SIDE HANDLE
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
Same tool as IAT-6041 but fitted with clean and strip wheel.
Used for stripping paint and materials off aluminium, steel
and stainless steel in preparation for recoating. Used in
many industries including automotive painting, machinery
restoration and structural steel painting.
NET WEIGHT
3950rpm
510L/min 18cfm
1/4”NPT
1.32kg
Same tool as IAT-6042 but with vacuum shroud for connection to a
vacuum cleaner or a central vacuum system for dust free operation.
IAT AIR TOOLS
305mm
FREE SPEED
SPECIALTY TOOLS & ACCESSORIES
305mm
See next page for wheels for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
C-19
SPECIALTY TOOLS & ACCESSORIES
IAT-6110
IAT-6111
SPECIALTY TOOLS & ACCESSORIES
20
115MM STRIPPING WHEEL
RUBBER ERASER WHEEL
WITH ADAPTOR
FOR USE ON IAT-6042 AND IAT-6044
CLEAN AND STRIP TOOLS
FOR USE ON IAT-6041 PIN STRIPE REMOVER
WIDTH
IAT-6112
IAT-6113
RUBBER ERASER WHEEL
ADAPTOR
FOR USE WITH IAT-6112 ADAPTOR
ON IAT - 6041 PIN STRIPE REMOVER
FOR USE WITH WIRE WHEELS AND IAT-6113
ERASER WHEEL
IAT-6114
IAT AIR TOOLS
14mm
IAT-6115
IAT-6116
0.5MM WIRE WHEEL
0.55MM WIRE WHEEL
0.7MM WIRE WHEEL
FOR USE WITH IAT-6112 ADAPTOR ON IAT-6042
AND IAT-6044 CLEAN AND STRIP TOOLS
FOR USE WITH IAT-6112 ADAPTOR ON IAT-6042
AND IAT-6044 CLEAN AND STRIP TOOLS
FOR USE WITH IAT-6112 ADAPTOR ON IAT-6042
AND IAT-6044 CLEAN AND STRIP TOOLS
DIAMETER
WIDTH
103mm
23mm
DIAMETER
WIDTH
103mm
23mm
DIAMETER
WIDTH
103mm
23mm
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
C-20
Specifications subject to change without notice. E&OE. ©
TAPPERS & ACCESSORIES
IAT-6550P
IAT-6512S
21
TAPPERS & ACCESSORIES
330mm
80mm
213mm
M12 PISTOL GRIP AIR TAPPER
TAPPING CAPACITY
FREE SPEED
SPINDLE TYPE
MAX. AIR CONS
NET WEIGHT
WIDTH
M2-M12
250rpm
TH1/B12
400L/min 14cfm
1.5kg
48mm
Powerful tool for tapping threads from M2 to
M12. Supplied with one tap holder of choice.
Rocker trigger facilitates fast reversing.
IAT-6522K
M12 STRAIGHT GRIP AIR TAPPER
TAPPING CAPACITY
195mm
FREE SPEED
MAX. AIR CONS
NET WEIGHT
WIDTH
M3-M12
400rpm
480L/min 17cfm
2kg
80mm
Straight grip tappers are preferred for vertical tapping
and for use in balancing arms. Supplied with one tap
holder of choice.
Also Available
IAT - 6513S 300rpm M3-M16
IAT - 6514S 120rpm M3-M22
IAT - 6515S 100rpm M3-M24
6530A
IAT-6530A
1140mm
M12 AIR TAPPING MACHINE
170mm
KIT CONSISTS OF BALANCING ARM, STRAIGHT TAPPER, TABLE
MOUNTING STAND, 6 TAP HOLDERS AND AIR SYSTEM
TAPPING CAPACITY
M3-M12
400rpm
MAX. AIR CONS
480L/min 17cfm
MA X. WORKING RE ACH 1900mm
NET WEIGHT
21kg
170mm
FREE SPEED
WIDTH
Air tapping machine for production situations where many vertical holes are to
be tapped in small components. Balancing arms provide better accuracy and
relieve the operator’s arm, wrist and shoulder from the tool’s weight, torque
and vibrations. They also save the tool from being dropped and damaged.
ROTATING TOOL HOLDER
TO SUIT IAT-6522K BALANCING ARM
WEIGHT
2kg
Tool holder for IAT-6522K to allow user to tap holes at
angles other than vertical and still utilise the advantages of
a tool balancing arm.
Also Available
IAT - 6523K M3-M16
IAT - 6524K M3-M22
IAT - 6525K M3-M24
IAT AIR TOOLS
870mm
Enquire about taps for these tools. For table of Tap Shank Dimensions see pages S-6
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
C-21
IAT AIR TOOLS
22
C-22
Specifications subject to change without notice. E&OE
E&OE. ©
SECTION D
DRILLS
GRINDERS
HAMMERS
IMPACT DRIVERS
IMPACT WRENCHES
NEEDLE SCALER
NIBBLER
OSCILLATING CUTTER
PANEL CUTTER
POLISHERS
PUNCH / FLANGE TOOL
RATCHET WRENCHES
SANDERS
SAWS
SHINANO
AIR TOOLS
•
Manufactured in Japan by SHINANO INC, these tools and
accessories offer uncompromising industrial quality at
reasonable prices.
•
Some SHINANO models have been in continuous production
since the Brand was first introduced into Australia in 1978.
•
Large inventories of spare parts are held in stock and these
include some parts for discontinued models.
•
SHINANO Air Tools are your choice if you need tools that will
give long reliable service in industrial production situations.
•
When service is needed we can direct you to your nearest
SHINANO servicing dealer.
•
A full range of SHINANO Air Tools with specifications,
application notes and prices is given on the following pages.
SCREWDRIVERS
SEALANT CUTTER
SHEARS
SPOT MILLS
TORQUE RATCHET
WRENCH
TRIMMER / ROUTER
SHINANO CONTENTS
TOOLS
SHINANO
SHINANO CONTENTS
2
D-2
PAGE
Drills
Straight / Angle / Pistol
3
Grinders
Pencil / Die
5
Grinder
Fan
6
Grinders
Angle
7
Grinders
Wet
8
Hammer
Pistol
9
Impact Drivers
Straight
9
Impact Drivers
Pistol
10
Impact Wrenches
1/4” Square Drive
11
Impact Wrenches
3/8” Square Drive
11
Impact Wrenches
1/2” Square Drive
12
Impact Wrenches
3/4” Square Drive
14
Impact Wrenches
1” Square Drive
14
Needle Scaler
Straight
15
Nibbler
Straight
16
Oscillating Cutter
63mm Ø Blade
16
Panel Cutter
75mm Wheel
16
Polishers
Single Action / Dual Action
17
Polishers
Geared Action
17
Polishers
Linear
19
Punch / Flange Tool
1.2mm Capacity
19
Ratchet Wrenches
1/4” Square Drive
20
Ratchet Wrenches
3/8” Square Drive
21
Ratchet Wrenches
1/2” Square Drive
22
Ratchet Wrenches
Through Type
23
Sanders
Belt
24
Sanders
Drum
25
Sanders
Disc
26
Sanders
Orbital
28
Sanders
Oscillating
29
Sanders
Dual Action
29
Sanders
Geared
33
Sanders
Wet
33
Saws
Reciprocating
34
Saws
Oscillating
34
Screwdrivers
Straight
35
Screwdrivers
Pistol
35
Sealant Cutter
Oscillating
36
Shears
Scissor
36
Shears
Single Cut
36
Shears
Double Cut
36
Spot Mills
8mm Cutter
37
Torque Wrench
1/2” Sq. Dr. - LED Display
38
Trimmer / Router
1/4” Collet
38
Specifications subject to change without notice. E&OE. ©
DRILLS
SI-5355
SI-2015AD
3
DRILLS
202mm
118mm
10MM ANGLE DRILL
10MM KEYED CHUCK / REVERSIBLE
6MM STRAIGHT DRILL
DRILLING CAPACITY
10mm CHUCK / NON REVERSIBLE
DRILLING CAPACITY
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
FREE SPEED
AV. AIR CONS
6mm
6000rpm
119L/min 4.2cfm
¼”NPT
1.06kg
170mm excl. handle
AIR INLET SIZE
220mm
69mm
NET WEIGHT
WIDTH
10mm
1200rpm
85L/min 3.0cfm
¼”NPT
0.94kg
44mm
Used for drilling, tapping, reaming,
screwdriving and nut-running in confined
locations. Also for application of cutting
and polishing compounds in the automotive
industry.
Straight drills are often preferred for vertical drilling. The SI-2015AD is
a versatile high speed tool, best suited for fast drilling of small diameter
holes for rivets, self tapping screws etc, in the Aircraft, Truck body,
Sheetmetal and Woodworking industries.
Also Available
Also Available
Plastic keyless chuck, order SI-2015ADK
Metal keyless chuck, order SI-2015ADMK
Plastic keyless chuck, order SI-5355K
Metal keyless chuck, order SI-5355MK
SI-5300A
SI-5100A
SI-5500
188mm
188mm
181mm
145mm
145mm
140mm
6MM PISTOL DRILL
10MM HEAVY DUTY PISTOL DRILL
10MM PISTOL DRILL
10MM KEYED CHUCK / NON REVERSIBLE
10MM KEYED CHUCK / NON REVERSIBLE
10MM KEYED CHUCK / NON REVERSIBLE
DRILLING CAPACITY
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
6mm
5000rpm
93L/min 3.3cfm
¼”NPT
0.9kg
40mm
DRILLING CAPACITY
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
2000rpm
102L/min 3.6cfm
¼”NPT
0.91kg
40mm
DRILLING CAPACITY
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
2600rpm
71L/min 2.5cfm
¼”NPT
0.79kg
40mm
A high speed pistol drill designed specifically
for production drilling of small diameter holes
in sheet metal for pop rivets, solid rivets and
self tapping screws.
A powerful, lightweight tool with heavy duty
planetary gearbox for drilling of holes up to 10mm
in steel. Suitable for use in Truck, Bus, and Special
Vehicle engineering shops. Automotive applications
include brake cylinder honing, hole sawing and
cleaning or stripping with wire wheels.
General purpose air drill for automotive
workshops, motor body repair shops and light
engineering shops.
Also Available
Also Available
Also Available
Plastic keyless chuck, order SI-5100AK
Metal keyless chuck, order SI-5100AMK
Plastic keyless chuck, order SI-5300AK
Metal keyless chuck, order SI-5300AMK
Plastic keyless chuck, order SI-5500K
Metal keyless chuck, order SI-5500AMK
SHINANO
FREE SPEED
Chucks available separately, see page L-19, For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-3
DRILLS
SI-5305A
SI-5501
SI-5505
DRILLS
4
190mm
163mm
190mm
149mm
147mm
135mm
8MM PISTOL DRILL
10MM KEYED CHUCK / NON REVERSIBLE
DRILLING CAPACITY
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
8mm
2400rpm
62L/min 2.2cfm
¼”NPT
0.6kg
40mm
Very light and compact drill with double layer
moulded rubber grip. Used in automotive
workshops, motor body repair shops,
manufacturing plants and light
engineering shops.
10MM PISTOL DRILL
10MM PISTOL DRILL
10MM KEYED CHUCK / REVERSIBLE
10MM PLASTIC KEYLESS CHUCK / REVERSIBLE
DRILLING CAPACITY
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Same as SI-5300 but with thumb operated
reversing switch for one-handed operation.
Does all the heavy duty work of the SI-5300
and in addition can be used as a reversible
screwdriver for undoing and refixing screws
in the manufacture and servicing of motor
vehicles and many small machines and
appliances. Also useful for tapping threads in
small diameter holes.
Also Available
Also Available
Plastic keyless chuck, order SI-5501K
Metal keyless chuck, order SI-5501MK
Plastic keyless chuck, order SI-5305AK
Metal keyless chuck, order SI-5305MK
SI-5506
SI-5405
DRILLING CAPACITY
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
SI-5200A
218mm
135mm
135mm
10mm
1900rpm
73L/min 2.6cfm
¼”NPT
0.75kg
40mm
Lightweight drill that comes standard with
a keyless chuck. Polymer body protects
operators hand in a cold environment, reduces
vibration and weight which reduces operator
fatigue. General purpose tool, suitable for
most industries, particularly in production
lines where light weight is an advantage.
210mm
163mm
145mm
10MM PISTOL DRILL
10MM PISTOL DRILL
13MM PISTOL DRILL
10MM KEYED CHUCK / REVERSIBLE
10MM PLASTIC KEYLESS CHUCK / REVERSIBLE
13MM CHUCK CAPACITY / NON REVERSIBLE
DRILLING CAPACITY
FREE SPEED
SHINANO
10mm
2000rpm
110L/min 3.9cfm
¼”NPT
1.02kg
42mm
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
1700rpm
68L/min 2.4cfm
¼”NPT
0.6kg
40mm
DRILLING CAPACITY
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
1500rpm
68L/min 2.4cfm
¼”NPT
1.08kg
43mm
DRILLING CAPACITY
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
13mm
600rpm
99L/min 3.5cfm
¼”NPT
1.42kg
170mm with handle
Very light and compact drill with double layer
moulded rubber grip. Similar applications to
the SI-5505 except it is even lighter in weight
and smaller in size. Ideal in situations where
access is limited. Lighter, still, with plastic
keyless chuck.
Similar tool to the SI-5505 with extra planetary
gears for slower speed, smooth operation and
extended tool life.
Double reduction planetary gearbox for
production drilling in steel. Larger holes can be
drilled in timber. Automotive applications include
hole sawing, valve guide reaming and knurling,
carbon removal, cylinder honing and drilling
chassis frames and trailer bodies. Also used for
stirring paints.
Also Available
Also Available
Also Available
Plastic keyless chuck, order SI-5506K
Metal keyless chuck, order SI-5506MK
Metal keyless chuck, order SI-5405AMK
Plastic keyless chuck, order SI-5200AK
Metal keyless chuck, order SI-5200AMK
Chucks available separately, see page L-19
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-4
Specifications subject to change without notice. E&OE. ©
DRILLS / GRINDERS
SI-5305-8A
SI-5405-6
SI-2051SG
5
135mm
149mm
175mm
20mm
13MM PISTOL DRILL
13MM PISTOL DRILL
PENCIL GRINDER
13MM KEYED CHUCK / REVERSIBLE
13MM PLASTIC KEYLESS CHUCK / REVERSIBLE
ROLL THROTTLE / POLYMER BODY COVER
DRILLING CAPACITY
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
DRILLING CAPACITY
13mm
800rpm
119L/min 4.2cfm
¼”NPT
1.45kg
170mm with handle
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
13mm
600rpm
65L/min 2.3cfm
¼”NPT
1.41kg
170mm with handle
STD COLLET
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Same applications as SI-5200A but can also be
used as a screwdriver or nut runner and for tapping
holes up to ½” diameter. High torque enables quick
removal of jammed drill bits. Used by the heavy tyre
industry for the insertion of plugs.
Similar tool to SI-5305-8A with polymer
body which protects operators hand in a cold
environment, reduces vibration and weight which
reduces operator fatigue. Features a double
reduction mechanism for increased power.
Also Available
Also Available
Plastic keyless chuck, order SI-5305-8AK
Metal keyless chuck, order SI-5305-8AMK
Metal keyless chuck, order SI-5405-6MK
A lightweight well balanced tool for use with small
carbide burs and mounted points on applications
such as metal dies and moulds, intricate metal
castings, engraving, wood carving, stone carving,
china, etc.
For extra 1/8” collet, order 340-2B.
For extra 3mm collet, order 340-2A
SI-2002
SI-2010
AI
AV
SI-2001S
1/8”
3mm
55000rpm
142L/min 5cfm
¼”NPT
0.19kg
20mm
DRILLS / GRINDERS
235mm
225mm
LA
BL
E
SO
ON
151mm
184mm
151mm
60mm
70mm
60mm
¼” COMPACT DIE GRINDER
¼” COMPACT DIE GRINDER
¼” MEDIUM DIE GRINDER
SAFETY LEVER THROTTLE
SAFETY LEVER THROTTLE / VARIABLE SPEED
SAFETY LEVER THROTTLE / POLYMER
BODY COVER / EXTENDED SHAFT
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
1/4”
6mm, 1/8”, 3mm
25000rpm
382L/min 13.5cfm
¼”NPT
0.37kg
37mm
STD COLLET
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm, 1/8”, 3mm
25000rpm
368L/min 13cfm
¼” NPT
0.37kg
37mm
STD COLLET
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Light weight compact industrial tool for easy
manoeuvrability in fine grinding of tools and
dies and light metal finishing. Takes carbide
burs, mounted stones, mini drum sanders,
polishing stones, etc.
Similar to SI-2001S but with polymer body cover
which absorbs vibration and insulates from the
cold metal motor housing.
¼”
6mm, 1/8”, 3mm
25000rpm
225L/min 9cfm
¼”NPT
0.52kg
40mm
Medium sized die grinder with similar
applications to SI-2011S but with a polymer body
cover which insulates from the cold metal motor
housing and absorbs vibration. Extended shaft
gives deeper access to internal work.
SHINANO
STD COLLET
For die grinder collets, see page L-20, For carbide burrs see Section N, Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-5
GRINDERS
SI-2012
SI-2011S
SI-2005
GRINDERS
6
157mm
170mm
170mm
67mm
67mm
75mm
¼” MEDIUM DIE GRINDER
¼” MEDIUM DIE GRINDER
¼” RIGHT ANGLE DIE GRINDER
SAFETY LEVER THROTTLE / VARIABLE SPEED
SAFETY LEVER THROTTLE / VARIABLE SPEED
/ POLYMER BODY COVER
SAFETY LEVER THROTTLE / VARIABLE SPEED
/ POLYMER BODY COVER
STD COLLET
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm, 1/8”, 3mm
22000rpm
566L/min 20cfm
¼” NPT
0.60kg
37mm
STD COLLET
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
A medium sized industrial tool for general purpose die
grinding, deburring, flash removal, and finishing using
carbide burs, mounted stones, mini drum sanders,
polishing stones, etc.
SI-2006S
STD COLLET
¼”
6mm, 1/8”, 3mm
22000rpm
566L/min 20cfm
¼”NPT
0.60kg
45mm
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm, 1/8”, 3mm
18000rpm
340L/min 12cfm
¼”NPT
0.50kg
35mm
Compact industrial tool for working in confined
spaces. Uses include fine grinding of tools and
dies and light metal finishing. Takes carbide burs,
mounted stones, mini drum sanders, polishing
stones, etc. Polymer body cover absorbs vibrations
and insulates from cold metal motor housing.
Similar to SI-2011S but with polymer body cover
which absorbs tool vibrations and insulates from
the cold metal motor housing.
SI-2015A
SI-2022S
157mm
217mm
326mm
69mm
75mm
67mm
¼” RIGHT ANGLE DIE GRINDER
SHINANO
SAFETY LEVER THROTTLE / VARIABLE SPEED
STD COLLET
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm, 1/8”, 3mm
18000rpm
326L/min 11.5cfm
¼”NPT
0.49kg
33mm
¼” EXTENDED DIE GRINDER
¼” FAN GRINDER
SAFETY LEVER THROTTLE / VARIABLE SPEED
SAFETY LEVER THROTTLE / VARIABLE SPEED
/ POLYMER BODY COVER
STD COLLET
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
6mm, 1/8”, 3mm
20000rpm
637L/min 22.5cfm
¼”NPT
1.34kg
40mm
STD COLLET
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Same applications as SI-2005 but with
aluminium body.
A medium sized industrial grinder similar to
SI-2011S but with extended spindle housing for
better control using 2 hands and better access
to internal work where extra reach is required.
¼”
6mm, 1/8”, 3mm
5500rpm
595L/min 21cfm
¼”NPT
0.91kg
40mm
A slow speed industrial die grinder for use with
mounted stones, mini drum sanders, polishing
stones, felt bobs, mounted wire and abrasive
brushes, etc where slower speed is required.
Polymer body cover absorbs vibration and
insulates from cold metal motor housing.
For die grinder collets, see page L-20, For carbide burrs see section N, Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-6
Specifications subject to change without notice. E&OE. ©
GRINDERS
SI-2050AG
SI-2023
7
GRINDERS
113mm
41mm
344mm
85mm
¼” EXTENDED FAN GRINDER
MINI ANGLE GRINDER
SAFETY LEVER THROTTLE
ROLL THROTTLE
STD COLLET
COLLET OPTIONS
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
WHEEL SIZE
¼”
6mm, 1/8”, 3mm
6000rpm
538L/min 19cfm
¼”NPT
1.7kg
45mm
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
30mm
25000rpm
170L/min 6cfm
¼”NPT
0.23kg
35mm
A miniature angle grinder which takes 30mm
vitrified stone wheels. Uses are for fine grinding
and polishing in the tool, die and mould making
trades as well as weld dressing and the fine
finishing of stainless steel and other metals in
corners and tight spaces.
Slow speed extended die grinder, similar to SI-2015A
but with extended spindle housing for better control
using 2 hands and better access to internal work
where extra reach is required. Used with cleaning,
stripping and surface conditioning wheels as well as
mini drum sanders and abrasive fan wheels.
For extra 30mm Ø Abrasive Wheel, order 340-57
SI-2500L
SI-2501L
191mm
223mm
80mm
94mm
100MM ANGLE GRINDER
100MM COMPACT ANGLE GRINDER
LEVER THROTTLE / GOVERNED
LEVER THROTTLE / GOVERNED
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
100 x 6 x 16CH
M10 x 1.5
11000rpm
467L/min 16.5cfm
¼”NPT
1.82kg
175mm
A lightweight powerful tool for tough hard-to-reach
industrial applications in foundries, ship yards, metal
fabrication shops, power stations, and general plant
maintenance. Designed for Type 27 Depressed Centre
Grinding Wheels. May also be fitted with a 4” Spiralcool
rubber back-up pad and abrasive fibre discs for high
speed weld dressing. Designed for type 27 Depressed
Centre Grinding Wheels. Not to be used for cutting off.
DISC SIZE
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
100 x 6 x 16CH
M10 x 1.5
12000rpm
382L/min 13.5cfm
¼”NPT
1.04kg
112mm
Similar to SI-2500L but much lighter in weight
and smaller in size. Polymer body cover absorbs
vibration and insulates from cold metal motor
housing. Does not come with side handle.
Designed for Type 27 Depressed Centre Grinding
Wheels. Not to be used for cutting off.
SHINANO
DISC SIZE
WARNING: MOS of abrasive wheels must exceed free speed of tools. For carbide burrs see section N, For Spiralcool backing pads see page L-24,
Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-7
GRINDERS
SI-2505L
SI-2515LA
GRINDERS
8
230mm
223mm
125MM ANGLE GRINDER
90mm
LEVER THROTTLE / GOVERNED
DISC SIZE
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
125 x 6 x 22CH
Splined
10000rpm
467L/min 16.5cfm
¼” NPT
1.91kg
134mm
LEVER THROTTLE / GOVERNED /
POLYMER BODY COVER
DISC SIZE
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Same applications as for SI-2500L but with larger
guard to take 5” diameter wheels. Designed for
Type 27 Depressed Centre Grinding Wheels. Not
to be used for cutting off.
125 x 6 x 22CH
M14 x 2.0
10000rpm
397L/min 14cfm
¼” NPT
1.65kg
134mm
Lighter weight general purpose grinder with same uses
as SI-2500L. Polymer body cover absorbs vibration and
insulates from cold metel motor housing. Features spindle
lock and safety lever throttle. Designed for Type 27
Depressed Centre Grinding Wheels. Threaded spindle allows
for use with rubber back-up pads and abrasive fibre discs for
high speed weld dressing. Not to be used for cutting off.
SI-2515LA-W
SI-2600L
230mm
337mm
180MM ANGLE GRINDER
110mm
SHINANO
SAFETY LEVER THROTTLE / GOVERNED
DISC SIZE
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
89mm
125MM ANGLE GRINDER
180 x 6 x 22CH
Splined
7000rpm
566L/min 20cfm
3/8” NPT
3.24kg
197mm
125MM WET ANGLE GRINDER
LEVER THROTTLE / GOVERNED /
POLYMER BODY COVER
DISC SIZE
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
A compact powerful tool for industrial applications which includes grinding blending
welds, flash removal and general cleaning in foundries, removing scale from flat
surfaces, plate chamfering prior to welding, dressing flame cut edges, etc. Designed
for Type 27 Depressed Centre Grinding Wheels. Not to be used for cutting off.
Also Available
For this tool with 5/8” – 11 spindle thread, order SI-2600L5/8BSW
For this tool with 14mm spindle thread, order SI-2600LM14
89mm
125 x 6 x 22CH
M14 x 2.0
10000rpm
397L/min 14cfm
¼” NPT
1.85kg
134mm
Heavy duty 5” wet angle grinder for grinding and polishing stone
and masonry using rubber back-up pad and special abrasives.
Features spindle lock button and safety lever throttle. Polymer
body cover insulates from cold metal motor housing. Designed for
Type 27 Depressed Centre Grinding Wheels. Not to be used for
cutting off.
WARNING: MOS of abrasive wheels must exceed free speed of tools. For Spiralcool backing pads see page L-24,
Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-8
Specifications subject to change without notice. E&OE. ©
HAMMER
SI-4120AK
9
MEDIUM STROKE HAMMER
SHANK SIZE
BLOWS / MIN.
AV. AIR CONS
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10.2mm dia
2600
85L/min 3cfm
425L/min 15cfm
¼”NPT
1.60kg
50mm
HAMMER / IMPACT DRIVERS
20MM STROKE / VARIABLE POWER
208mm
A general purpose tool used for stripping, brick
cleaning, metal piercing, rivet and bolt cutting, bushing
driving, and automotive front end work. Takes Alliance
quick change chisel retainer and Alliance needle scaler
attachment for weld dressing. Uses the IAT range of
10.2mm shank automotive chisels.
163mm
SI-4120A comes with a set of four chisels
For spare Retainer Spring, order 400-8
IMPACT DRIVERS
SI-1060
AI
AV
SI-1301D
LA
BL
E
SO
ON
6MM STRAIGHT IMPACT DRIVER
208mm
DOUBLE HAMMER CLUTCH / REAR EXHAUST
/ REVERSIBLE
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
6mm
65Nm/48ft lb
83L/min 2.9cfm
¼”NPT
0.87kg
40mm
A powerful lightweight tool with hard hitting
double hammer mechanism. Used for assembly
work on small manufactured items such as
electric appliances, engine components,
electric motors and many other light assembly
applications. Can be suspended from an
overhead tool balancer.
6MM STRAIGHT IMPACT DRIVER
DOUBLE HAMMER CLUTCH
/ BUTTERFLY THROTTLE / REVERSIBLE
SCREW CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
166mm
50mm
6mm
55Nm/40ft lb
74L/min 2.6cfm
¼”NPT
0.68kg
WIDTH
Butterfly throttle with instant reverse for single
handed work in tight areas, ideal for light
assembly and small engine work
SHINANO
SCREW CAPACITY
60mm
For chisels, see from page L-16, For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-9
IMPACT DRIVERS
SI-1370D
10
IMPACT DRIVERS
8MM STRAIGHT IMPACT DRIVER
DOUBLE HAMMER CLUTCH
/ MUFFLED EXHAUST / REVERSIBLE
SCREW CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
8mm
80Nm/59ft lb
122L/min 4.3cfm
¼”NPT
1.21kg
48mm
Powerful double hammer tool with silencer.
Designed for overhead suspension with palm
grip throttle operation. Larger capacity and
heavier duty than SI-1060 and SI-1301D.
227mm
73mm
SI-1070
AI
AV
SI-1065
LA
BL
E
SO
ON
6MM PISTOL IMPACT DRIVER
6MM PISTOL IMPACT DRIVER
DOUBLE HAMMER CLUTCH / HANDLE EXHAUST
/ REVERSIBLE
DOUBLE HAMMER CLUTCH
SCREW CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
6mm
65Nm/48ft lb
96L/min 3.4cfm
¼”NPT
0.98kg
40mm
A powerful compact lightweight pistol grip,
double hammer impact driver for assembly
and dis-assembly work.
SCREW CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
165mm
164mm
152mm
SI-1356D
SHINANO
6mm
35Nm/25ft lb
60L/min 2.1cfm
¼”NPT
0.37kg
Compact, lightweight tool for general assembly work.
Moulded rubber hand grip reduces vibration, adds
comfort and insulates operators hand in cold conditions.
“Feather Touch” trigger for easy operation.
SI-1365D
8MM PISTOL IMPACT DRIVER
8MM PISTOL IMPACT DRIVER
DOUBLE HAMMER CLUTCH /
FRONT EXHAUST / REVERSIBLE
DOUBLE HAMMER CLUTCH / MUFFLED
EXHAUST / REVERSIBLE
SCREW CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
135mm
8mm
55Nm/40ft lb
77L/min 2.7cfm
¼”NPT
1.22kg
46mm
Used for assembly work in the manufacture and repair
of small engines, lawn mowers, pumps, trowelling
machines and many other applications and in assembly
of slotted angle racking and shelving subject to torque
requirements. Used in the furniture manufacturing
industry for driving screws into particleboard where fine
control is needed and no torque reaction is wanted.
SCREW CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
142mm
174mm
8mm
70Nm/51ft lb
94L/min 3.3cfm
¼”NPT
1.32kg
55mm
A compact tool with a double hammer impact mechanism
which gives it a high power-to-weight ratio for industrial
use. The exhaust is through the handle for quieter
operation. Uses are as for SI-1356D but where more
power is required.
143mm
193mm
For explanation of clutch mechanisms see page D-15, For overhead tool balancers see section M
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-10
Specifications subject to change without notice. E&OE. ©
IMPACT WRENCHES
SI-1305
AI
AV
SI-1301
AI
AV
SI-1310
LA
LA
11
BL
BL
E
E
SO
SO
158mm
156mm
135mm
50mm
90mm
¼” PISTOL IMPACT WRENCH
3/8” STRAIGHT IMPACT WRENCH
3/8” STRAIGHT IMPACT WRENCH
DOUBLE HAMMER CLUTCH / HANDLE EXHAUST
BUTTERFLY THROTTLE / DOUBLE
HAMMER CLUTCH
BUTTERFLY THROTTLE / SINGLE HAMMER
CLUTCH / FRONT EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
8mm
40Nm/30ft lb
60L/min 2.1cfm
¼”NPT
0.63kg
42mm
BOLT CAPACITY
BOLT CAPACITY
10mm
70Nm/52ft lb
74L/min 2.6cfm
¼”NPT
0.65kg
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
WIDTH
¼” impact wrench for small bolts and nuts.
Used for light assembly and service work.
Applications include appliance assembly, small
engine assembly and service. Composite body
absorbs vibration and insulates hand from cold
metal motor housing. Feather torch trigger for
easy operation
Similar applications to SI-1301 but with
increased torque. Polymer body cover
reduces vibration and is an advantage in
cold weather. 360º air inlet swivel increases
manoeuvrability. Single hammer clutch gives
greater hitting power
Butterfly throttle, with instant reverse,
for single handed work on small bolts and
nuts in engine and body repair shops. Also,
carburettors, ignitions, body panels, bumper
and fender struts, oil pans, etc. Also for small
engine and light industrial assembly work.
AI
AV
SI-1351
AI
AV
SI-1315
SI-1370
10mm
90Nm/66ft lb
80L/min 2.8cfm
¼”NPT
0.94kg
48mm
IMPACT WRENCHES
ON
ON
159mm
LA
LA
BL
BL
E
E
SO
SO
ON
ON
133mm
159mm
219mm
135mm
180mm
73mm
3/8” PISTOL IMPACT WRENCH
3/8” PISTOL IMPACT WRENCH
DOUBLE HAMMER CLUTCH / MUFFLED EXHAUST
DOUBLE HAMMER CLUTCH / HANDLE EXHAUST
ROLLER CLUTCH
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
100Nm/74ft lb
122L/min 4.3cfm
¼”NPT
1.18kg
48mm
Straight twin hammer impact wrench suitable
for overhead suspension work on assembly and
service benches.
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
60Nm/44ft lb
60L/min 2.1cfm
¼”NPT
0.63kg
42mm
Lightweight impact wrench with polymer body
which absorbs vibration and insulates operators
hand from the cold. A quality general purpose
wrench for all smaller assembly jobs.
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
90Nm/66ft lb
77L/min 2.7cfm
¼”NPT
1.1kg
46mm
Powerful lightweight wrench suitable for bench
work such as transmissions, small engines,
lawnmowers, air-conditioning units and large
appliances. Features a built-in regulator and
the roller clutch is very smooth in
operation and long lasting.
SHINANO
3/8” STRAIGHT IMPACT WRENCH
Enquire about Impact sockets for these tools. For explanation of clutch mechanisms see page D-15, For overhead tool balancers see section M
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-11
IMPACT WRENCHES
SI-1355
SI-1365
SI-1605
IMPACT WRENCHES
12
134mm
174mm
142mm
193mm
170mm
174mm
3/8” PISTOL IMPACT WRENCH
3/8” PISTOL IMPACT WRENCH
3/8” PISTOL IMPACT WRENCH
SINGLE HAMMER CLUTCH / FRONT EXHAUST
DOUBLE HAMMER CLUTCH / MUFFLED EXHAUST
TWIN HAMMER CLUTCH / MUFFLED EXHAUST
BOLT CAPACITY
10mm
90Nm/66ft lb
77L/min 2.7cfm
¼”NPT
1.12kg
44mm
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Similar to SI-1351 in size and capacity. Has
push button for reverse and single hammer
clutch for increased impact.
BOLT CAPACITY
10mm
100Nm/74ft lb
94L/min 3.3cfm
¼”NPT
1.31kg
52mm
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
The ultimate design for a 3/8” sq.dr. impact
wrench. A powerful lightweight tool which is
quieter and has more torque than SI-1351.
Fitted with double hammer impact mechanism
for faster run-down. Precision machined motor
for long life. Muffled exhaust for industrial use.
Applications are similar to those for SI-1351.
SI-1422T
SI-1420T
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
16mm
350Nm/258ft lb
108L/min 3.8cfm
¼”NPT
1.03kg
63mm
New compact, lightweight model with
the same new rubber grip that is featured
on the SI-1490 and SI-1610 ½" models.
Muffled exhaust for industrial use. Ideal
for work on repair and assembly of
motors, small engines, lawnmowers, etc in
automotive and industrial workshops.
SI-1440T
IMPROVED
MODEL
IMPROVED
MODEL
191mm
225mm
188mm
201mm
201mm
SHINANO
198mm
½” PISTOL IMPACT WRENCH
½” PISTOL IMPACT WRENCH
½” PISTOL IMPACT WRENCH
TWIN HAMMER CLUTCH / FRONT EXHAUST
50MM EXTENDED ANVIL / TWIN HAMMER
CLUTCH / FRONT EXHAUST
TWIN HAMMER CLUTCH / HANDLE EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
16mm
500Nm/369ft lb
114L/min 4cfm
¼”NPT
2.55kg
67mm
BOLT CAPACITY
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Popular heavy duty impact wrench for
automotive, industrial and farm use. High
strength body with steel nose and built-in
power regulator. Positive action reverse switch.
Now with twin hammer clutch for greater
impact, increased torque and longer life.
16mm
480Nm/354ft lb
114L/min 4cfm
¼”NPT
2.64kg
67mm
Same as SI-1420T but with 2” extended anvil
for easier access into recessed wheels and
other applications in confined spaces. Also
takes double ended sockets.
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
18mm
850Nm/627ft lb
136L/min 4.8cfm
¼”NPT
2.12kg
68mm
Very powerful, heavy duty impact wrench with
similar applications to SI-1420T but with much
higher torque. Oil flooded clutch provides
continuous lubrication, less wear. Very popular
in tyre shops.
Also Available
Also Available
Optional Vinyl Cover, order 930B-12
Optional Vinyl Cover, order 930B-12
Enquire about impact sockets for these tools. For explanation of clutch mechanisms see page D-15
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-12
Specifications subject to change without notice. E&OE. ©
IMPACT WRENCHES
SI-1442T
SI-1480A
AI
AV
SI-1456
LA
13
BL
E
SO
208mm
168mm
191mm
160mm
198mm
½” PISTOL IMPACT WRENCH
½” PISTOL IMPACT WRENCH
½” PISTOL IMPACT WRENCH
50MM EXT. ANVIL / TWIN HAMMER
CLUTCH / HANDLE EXHAUST
PIN CLUTCH / POLYMER BODY
PIN CLUTCH / HANDLE EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
BOLT CAPACITY
MAX TORQUE
18mm
800Nm/590ft lb
136L/min 4.8cfm
¼”NPT
2.22kg
68mm
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
BOLT CAPACITY
16mm
220Nm/162ft lb
102L/min 3.6cfm
¼”NPT
1.13kg
49mm
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Compact, narrow and lightweight impact
wrench for easier access in narrow and
difficult areas. The one piece polymer body
and pin clutch reduce vibration and make
operation smoother.
Same as SI-1440T but with 2” extended anvil
for easier access into recessed wheels and
other confined spaces. Also takes double
ended sockets
IMPACT WRENCHES
ON
49mm
240mm
18mm
800Nm/590ft lb
165L/min 5.8cfm
¼”NPT
2.07kg
70mm
A powerful impact wrench with pin clutch which
has lower vibration than twin hammer clutch.
Applications are similar to SI-1420T. Available with
a protective boot.
Also Available
Optional Vinyl Cover, order 911
SI-1482A
SI-1490A
½” PISTOL IMPACT WRENCH
½” PISTOL IMPACT WRENCH
50MM EXT. ANVIL / PIN CLUTCH
/ HANDLE EXHAUST
TWIN HAMMER CLUTCH / MUFFLED EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
BOLT CAPACITY
18mm
780Nm/575ft lb
165L/min 5.8cfm
¼”NPT
2.11kg
70mm
Same as SI-1480A but with extended anvil for
easier access into recessed wheels and other
confined spaces. Also takes double ended
sockets.
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
236mm
WIDTH
191mm
Also Available
Optional Vinyl Cover, order 911
SI-1492A
AIR INLET SIZE
NET WEIGHT
WIDTH
189mm
20mm
850Nm/627ft lb
145L/min 5.1cfm
¼”NPT
1.79kg
74mm
Same as SI-1490 but with extended anvil for easier
access into recessed wheels and other hollow areas. Also
takes double ended sockets.
TWIN HAMMER CLUTCH / MUFFLED EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
220mm
WIDTH
189mm
18mm
450Nm/332ft lb
108L/min 3.8cfm
¼”NPT
1.04kg
62mm
New compact, lightweight impact wrench with the same new
rubber grip that is featured on the SI-1490. Ideal for work on
repair and assembly of motors etc in automotive and industrial
workshops where other impact wrenches are likely to shear
bolts and strip threads and the reduced size gives better access.
148mm
174mm
SHINANO
AV. AIR CONS
New model of ½” impact wrench with Shinano’s new look
rubber grip that absorbs vibration, is more comfortable
to hold and protects operators hand from the cold. With a
powerful 850Nm max. torque, this tool is already proving
very popular both in the automotive and industrial fields.
COMPACT ½” PISTOL
IMPACT WRENCH
50MM EXT. ANVIL / TWIN HAMMER CLUTCH /
MUFFLED EXHAUST
MAX TORQUE
175mm
SI-1610
½” PISTOL IMPACT WRENCH
BOLT CAPACITY
20mm
850Nm/627ft lb
145L/min 5.1cfm
¼”NPT
1.76kg
74mm
Enquire about impact sockets for these tools. For explanation of clutch mechanisms see page D-15, For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-13
IMPACT WRENCHES
SI-1760T
SI-1556
SI-1550
IMPACT WRENCHES
14
268mm
218mm
249mm
388mm
198mm
230mm
¾” PISTOL IMPACT WRENCH
¾” PISTOL IMPACT WRENCH
1” PISTOL IMPACT WRENCH
TWIN HAMMER CLUTCH / HANDLE EXHAUST
150MM EXT. ANVIL / TWIN HAMMER CLUTCH
/ HANDLE EXHAUST
TWIN HAMMER CLUTCH / HANDLE EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
24mm
1650Nm/1217ft lb
227L/min 8cfm
3/8”NPT
3.25kg
94mm
Designed for heavy duty operation in industrial,
construction, automotive and farm applications.
Uses include heavy machinery maintenance and
repair, steel erection, pipeline construction and
heavy marine and industrial engines. Light weight
and compact for minimum operator fatigue.
SI-1766T
BOLT CAPACITY
BOLT CAPACITY
24mm
1550Nm/1143ft lb
227L/min 8cfm
3/8”NPT
3.95kg
94mm
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Same as SI -1550 but with 6” extended anvil
for easier use with recessed wheels and other
applications in confined spaces
SI-1770T
430mm
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
38mm
2200Nm/1620ft lb
377L/min13.3cfm
½” NPT
8.13kg
205mm
The main use for this tool is underneath heavy
equipment where access is limited. Typical uses
are U-bolts and springs on heavy truck and bus
suspensions, off road equipment, end loaders,
scrapers, heavy duty farm equipment and large
diesel engines.
SI-1776T
355mm
530mm
155mm
249mm
155mm
1” PISTOL IMPACT WRENCH
SHINANO
150MM EXT. ANVIL / TWIN HAMMER CLUTCH
/ HANDLE EXHAUST
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
38mm
2160Nm/ 1590ft lb
377L/min 13.3cfm
½” NPT
8.56kg
205mm
Same as 1760T but with 6” extended anvil,
this wrench has many applications similar to
SI-1760T but where deep recesses are
involved, such as large truck wheels
1” D-HANDLE
IMPACT WRENCH
TWIN HAMMER CLUTCH
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
38mm
2300Nm/1700ft lb
349L/min 12.3 cfm
½” NPT
8.44kg
205mm
This is a powerful tool for heavy production work
such as steel erection, heavy equipment assembly/
disassembly, mining, pipeline construction,
refineries, oil rigs, petrochemical plants, etc.
Compact body design minimises weight and twin
hammer clutch maximises power.
1” D-HANDLE IMPACT WRENCH
150MM EXT. ANVIL / TWIN HAMMER CLUTCH
BOLT CAPACITY
MAX TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
38mm
2200Nm/ 1620ft lb
349L/min 12.3cfm
½” NPT
8.87kg
205mm
Same as SI-1770T but with 6” extended anvil,
this tool is used extensively in heavy truck tyre
shops where the extended anvil facilitates work
on dual wheels.
Enquire about impact sockets for these tools. For explanation of clutch mechanisms see next page
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-14
Specifications subject to change without notice. E&OE. ©
IMPACT WRENCHES
EXPLANATION OF CLUTCH MECHANISMS FOR IMPACT TOOLS
SINGLE HAMMER
DOUBLE HAMMER
Two hammers making two
impacts per rotation. The two
hammers are of the same form as
the single hammer but opposite
each other so there is less
vibration yet higher torque than
the single hammer
Two hammers making one impact
per rotation.This design is the
most durable of hammer designs.
It is lighter with less vibration and
produces a powerful impact.
ROLLER CLUTCH
PIN CLUTCH
One hammer making one impact
per rotation. It produces high
torque per impact like the single
hammer but spins faster producing
more impacts per minute.
One hammer makeing one impact
per rotation.Rotating mechanism
in which two round hammer pins
move up and down, engaging the
anvil and producing a powerful
impact. It produces high torque
with minimum vibration.
NEEDLE SCALER
SI-4150
HEAVY DUTY NEEDLE SCALER
CAPACITY
BLOWS/MIN
MAX. AIR CONS
AIR INLET SIZE
WEIGHT
WIDTH
12x3mm Ø needles
3500
184L/min 6.5cfm
¼” NPT
2.06kg
50mm
15
IMPACT WRENCHES / NEEDLE SCALER
One hammer making one impact
per rotation.This means greater
hitting power, long life and easy
maintenance.
TWIN HAMMER
Straight needle scaler with resin grip for operator
comfort. Needles are easy to change. Uses include
removal of rust, paint, scale, flux, and weld spatter on
irregular surfaces, corners, depressions and hard to
reach areas. Also useful for roughening masonry and
brick and cleaning concrete.
333mm
68mm
All needles are Ø 3mm x 180mm long with a countersunk head. Flat, chisel and pointed tip options.
SHINANO
Replacement Needles
For needles with flat tip order
C6000-3FTC
For needles with chisel tip order
C6000 -3CTC
For needles with pointed tip order
C6000-03PTC
Bulk needle prices available on request.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-15
NIBBLER
SI-4600
16
SHEET METAL NIBBLER
NIBBLER / OSCILLATING CUTTER / PANEL CUTTER
CAPACITY
STROKE SPEED
MIN RADIUS
MA X AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
175mm
1.6mm mild steel
2500spm
4.5mm
467L/min 16.5cfm
¼” NPT
1.0kg
41mm
114mm
A compact and versatile tool for nibbling plastic, tin, aluminium and other metals. Because of its small size, this tool
is easily manouverable in confined spaces and is very useful in detail sheet metal work, auto body repair shops and
automotive accessory installation. Small head allows nibbling of small radii.
Spare Punch, order 502-42
Spare Die, order 502-41
OSCILLATING CUTTER
SI-4300
OSCILLATING CUTTER
FITTED WITH DEPTH-OF-CUT GAUGE
BLADE SIZE
CUTTING DEPTHS
OSCILLATING SPEED
MAX. AIR CONS
NET WEIGHT
WIDTH
63mm Ø
2, 4, or 6mm
20 000spm
397L/min 14cfm
0.89kg
42mm
508-45B
508-45A
Designed for cutting auto body panels. Two different blades are supplied,
508-45A for cutting larger areas and 508-45B where small, specific pieces
of metal need to be cut for fitting locks, handles or trims etc. The depthof-cut gauge allows the operator to cut a specific depth and thus avoid
damaging anything else below the surface of the panel skin.
203mm
62mm
PANEL CUTTER
SHINANO
SI-2033
75MM DISC CUTTER
USES THIN CUTTING DISCS
196mm
DISC SIZE
CUT CAPACITY
FREE SPEED
AV. AIR CONS
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
75 x 1.6x 9.5CH
1.2mm
17000rpm
113L/min 4cfm
567L/min 20cfm
¼” NPT
1.0kg
96mm
93mm
Used in automotive body shops and sheet metal shops for fast cutting of
sheet metal. Also used for cutting fibreglass, bolts, muffler clamps and
hangers; as well as deburring and smoothing rough edges.
For extra 75mm Cut-off disc, order 760908
WARNING: MOS of abrasive wheels must exceed free speed of tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-16
Specifications subject to change without notice. E&OE. ©
POLISHERS
SI-2221
17
70MM SINGLE ACTION POLISHER
PAD SIZE
SPINDLE SIZE
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
POLISHERS
VERTICAL SHAFT / HOOK & LOOP PAD / VARIABLE SPEED
70mm
M6X1
4500rpm
354L/min 12.5cfm
¼”
0.64kg
70mm
111mm
Light and compact geared polisher with 70mm
hook & loop pad. Can be used with either a wool
buff or sponge pad. Designed for polishing or
buffing painted surfaces in confined areas. Very
suitable for repairing small scratches or buffing
out dust on painted surfaces
Accessory
Part No.
Velcro Pad
119-100
Abrasive Paper
Available in 5 grits see page L-4
Wool Buff
119-102
Sponge Buff
119-101
147mm
AI
AV
SI-2415
SI-2009
LA
BL
E
SO
ON
180mm
80MM SINGLE ACTION POLISHER
76mm
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
80mm
5/16”-24
2600rpm
354L/min 12.5cfm
¼” NPT
0.68kg
145mm
New model that is compact in design and
features a side handle for greater control.
Slower in speed than the SI-2221, the SI-2009
is less likely to burn the surface being polished.
Supplied with wool and sponge buff.
103mm
107mm
PAD SIZE
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
WEIGHT
140mm dia.
1200rpm
482 L/min 17cfm
¼” NPT
1.45kg
Low speed, high torque polisher designed for wax
polishing auto body panels. Geared dual action provides
a better finish than random action. Sponge buff and wool
buff supplied with tool.
GEARED
ACTION
For extra backing pad - order 1145-5
For extra sponge buff - order 1145-101
For extra wool buff - order 1145-102
SHINANO
VERTICAL SHAFT / HOOK & LOOP PAD
HOOK & LOOP PAD
PAD SIZE
247mm
140MM GEARED ACTION POLISHER
Enquire about abrasives for these tools. Enquire about backing pads for these tools. Enquire about sponge pads & wool buffs for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-17
POLISHERS
SI-2405
SI-3100P
POLISHERS
18
235mm
245mm
160mm
150MM DUAL ACTION POLISHER
150MM SINGLE ACTION POLISHER
261mm
40MM THICK HOOK & LOOP SPONGE PAD
/ WOOL BUFF / VARIABLE SPEED
VERTICAL SHAFT / HOOK & LOOP PAD
131mm
PAD SIZE
BUFF SIZE
FREE SPEED
ORBIT DIAMETER
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
150mm dia
165mm dia
8000rpm
6mm
326L/min 11.5cfm
¼” NPT
1.81kg
140mm
A special tool for application of polishing wax in automotive detailing
and body repair. Also used for power sponging of water films from
surfaces to be painted. Supplied with sponge and wool buff.
For Wool Buff order M150
For Sponge Buff order M-40 x 165B
PAD SIZE
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
WEIGHT
WIDTH
150mm
5/16”- 24F/5/8” - 11M
1800rpm
397L/min 14cfm
¼” NPT
1.17kg
235mm
Lightweight polisher that can also be used as a
sander. Supplied with a hook & loop pad. Other
pads available are rubber backing pad where paint
scorching is a problem and pads to take 150mm
surface conditioning discs for metal, wood and
plastics prior to painting. Also takes standard 3/8”
chuck for use as an air drill.
SI-2400
180MM SINGLE ACTION POLISHER
VERTICAL SHAFT / VARIABLE SPEED
PAD SIZE
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
WEIGHT
SHINANO
WIDTH
180mm dia.
5/8” - 11
2000rpm
567L/min 20cfm
¼” NPT
2.24kg
235mm
Full 180mm polisher used for buffing and polishing
paint, metal, wood or plastic. Supplied with plastic
backing pad to take 180mm lambs wool. Other
pads are available, such as rubber backing pad to
help eliminate paint scorching and pads to take
180mm surface conditioning discs for obtaining
uniform, clean, bur free surfaces prior to painting.
Also used for finishing aluminium and polishing
stainless steel.
240mm
257mm
187mm
For Spiralcool backing pads see page L-24, Enquire about abrasives for these tools. Enquire about backing pads for these tools.
Enquire about sponge pads & wool buffs for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-18
Specifications subject to change without notice. E&OE. ©
POLISHERS
SI-2451
19
358mm
POLISHERS / PUNCH/FLANGE TOOL
180MM SINGLE ACTION POLISHER
ANGLE POLISHER
PAD SIZE
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
WEIGHT
WIDTH
100mm
180mm dia.
5/8” - 11
2300rpm
552L/min 19.5cfm
¼” NPT
2.13kg
235mm
A heavy duty buffing and polishing tool for flat and contour metal, wood or
plastic surfaces. Standard pad takes 180mm lambs wool buff but can be
fitted with other pads for hook & loop buffs or surface conditioning discs for
preparation of surfaces for painting or plating. Rear through-handle exhaust
diects exhaust air away from operator and workplace.
Also Available
For this tool with 14mm spindle thread, order SI-2451M14
SI-2451LP
100MM LINEAR POLISHER
TAKES VARIOUS WHEELS, DRUMS AND BRUSHES
WHEEL SIZE
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
WEIGHT INC. WHEEL
WIDTH
100 x 100 x 19CH
2300rpm
552L/min 19.5cfm
¼”NPT
4.78kg
195mm
350mm
Ideal for polishing, grinding, brushing, cleaning, stripping and sanding large
surfaces on metal and timber using a range of surface conditioning wheels.
Can also be fitted with expansion rollers or inflatable drums to take a range
of grinding and finishing sleeves. Wire and fibre bristle wheels are also
available. Linear action gives straight grained finish.
180mm
PUNCH / FLANGE TOOL
SI-4800
PUCHING CAPACITY
FLANGING CAPACITY
AV. AIR CONS
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
SHINANO
AIR / HYDRAULIC SHEET METAL
PUNCH / FLANGE TOOL
226mm
94mm
5Ø x 1.2mm
22 x 12 x 1.2mm
37L/min 1.3cfm
184L/min 6.5cfm
¼” NPT
1.01kg
52mm
A two-in-one tool used in the automotive body repair and sheet metal trades
for flanging up to 18 gauge steel then punching a hole around which to run a
weld to produce a stitch welded joint.
For spare Punch, order 145-14-5
For spare Die, order 145-13-5
For Spiralcool backing pads see page L-24, Enquire about abrasives for these tools. Enquire about backing pads for these tools.
Enquire about sponge pads & wool buffs for these tools
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-19
RATCHET WRENCHES
SI-1108B
SI-1107B
RATCHET WRENCHES
20
125mm
47mm
125mm
3/8” MICRO MINI RATCHET WRENCH
¼” MICRO MINI
RATCHET WRENCH
REAR EXHAUST / POLYMER BODY COVER
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
BOLT CAPACITY
6mm
300rpm
30Nm/22ft lb
51L/min 1.8cfm
1/8” NPT
0.39kg
36mm
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
300rpm
30Nm/22ft lb
51L/min 1.8cfm
1/8” NPT
0.40kg
36mm
3/8” version of SI-1107B. Has the added advantage
of a wobble anvil which is a specially shaped anvil
which allows the socket to rotate at an angle like a
universal joint. This enables the user to get into even
tighter spaces. The wobble feature can be bypassed
by pushing the socket further onto the anvil to lock it.
Micro mini ratchet wrenches are even smaller
than the mini range. This is the tool for those
tight, difficult-to-access jobs such as underdashboard work.
SI-1200B
SI-1251
SI-1207
168mm
170mm
168mm
44mm
SHINANO
47mm
WOBBLE ANVIL / REAR EXHAUST /
POLYMER BODY COVER
50mm
46mm
¼” MINI RATCHET WRENCH
¼” MINI RATCHET WRENCH
¼” MINI RATCHET WRENCH
REAR EXHAUST
REAR EXHAUST / VARIABLE SPEED
/ POLYMER BODY COVER
REAR EXHAUST / VARIABLE SPEED
/ POLYMER BODY COVER
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
6mm
200rpm
35Nm/26ft lb
45L/min 1.6cfm
1/4” NPT
0.51kg
36mm
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Compact size ratchet for tightening or loosening
nuts and bolts in confined spaces. Used for light
assembly and service work involving ¼” bolts and
nuts. Applications include appliance assembly,
sheet metal assembly, small engine assembly and
service, and under dashboard work.
6mm
200rpm
38Nm/28ft lb
45L/min 1.6cfm
1/4”NPT
0.54kg
37mm
Compact ratchet that has the added features
over the SI-1200B of variable speed control and
polymer body cover. Applications and uses are the
same as SI-1200B.
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
6mm
200rpm
45Nm/33ft lb
68L/min 2.4cfm
1/4”NPT
0.56kg
35mm
More powerful model than SI-1200B and SI-1207.
Has added advantage of forward and reverse
slide switches at operators thumb tip making it a
one handed operation. Ideal for situations where
changing from forward to reverse is constant.
Enquire about hexagon sockets for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-20
Specifications subject to change without notice. E&OE. ©
RATCHET WRENCHES
AI
AV
SI-1208Q
SI-1205B
LA
21
BL
E
SO
44mm
3/8” MINI RATCHET WRENCH
3/8” MINI RATCHET WRENCH
REAR EXHAUST
REAR EXHAUST / VARIABLE SPEED / POLYMER
BODY COVER / QUICK CHANGE SOCKET FUNCTION
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
220rpm
40Nm/30ft lb
45L/min 1.6cfm
1/4”NPT
0.51kg
35mm
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
170mm
47mm
10mm
240rpm
40Nm/30ft lb
65L/min 2.3cfm
1/4” NPT
0.53kg
40mm
RATCHET WRENCHES
ON
170mm
Similar tool to SI-1200B only with a 3/8” anvil.
Similar to SI-1208 but features a quick socket
release function. The button on the top of the
tool, when depressed, releases the socket
making it very convenient when using a range
of different sockets in the one process.
SI-1208
SI-1252
SI-1241A
190mm
168mm
170mm
3/8” MINI RATCHET WRENCH
3/8” MINI RATCHET WRENCH
REAR EXHAUST / VARIABLE SPEED
/ POLYMER BODY COVER
REAR EXHAUST / VARIABLE SPEED
/ POLYMER BODY COVER
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
200rpm
40Nm/30ft lb
62L/min 2.2cfm
1/4”NPT
0.54kg
40mm
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
260rpm
47Nm/35ft lb
68L/min 2.4cfm
1/4” NPT
0.56kg
38mm
3/8” SWING HEAD
RATCHET WRENCH
REAR EXHAUST / VARIABLE SPEED
/ POLYMER BODY COVER
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
3/8” version of SI-1207.
3/8” version of SI-1251 featuring the speed
adjuster and forward and reverse slide switches.
10mm
250rpm
30Nm/22ft lb
54L/min 1.9cfm
1/4” NPT
0.63kg
39mm
Medium sized ratchet with a head that swings into
9 different positions making it possible to access
areas where standard ratchets and spanners can’t.
The socket lock mechanism prevents the loss of
sockets on the job.
SHINANO
BOLT CAPACITY
48mm
50mm
48mm
Enquire about hexagon sockets for these tools. For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-21
RATCHET WRENCHES
SI-1261
SI-1320A
SI-1340B
RATCHET WRENCHES
22
259mm
265mm
49mm
265mm
48mm
47mm
3/8” STANDARD RATCHET WRENCH
3/8” STANDARD RATCHET WRENCH
3/8” STANDARD RATCHET WRENCH
REAR EXHAUST / VARIABLE SPEED
/ POLYMER BODY COVER
FRONT EXHAUST
REAR EXHAUST / VARIABLE SPEED
/ POLYMER BODY COVER
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
BOLT CAPACITY
10mm
170rpm
110Nm/81ft lb
85L/min 3.0cfm
1/4” NPT
1.2kg
44mm
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
12mm
160rpm
80Nm/59ft lb
77L/min 2.7cfm
1/4” NPT
1.16kg
44mm
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
General purpose ratchet wrench for mechanical
workshops and maintenance applications.
Heavy duty ratchet wrench with forward and
reverse slide switches at thumb tip making it
convenient to use. Ideal for situations where
changing from forward to reverse is constant,
particularly in assembly and service workshops.
SI-1262
12mm
160rpm
110Nm/81ft lb
71L/min 2.5cfm
1/4”NPT
1.14kg
41mm
Premium quality ratchet wrench with speed
regulator and polymer body cover. Planetary
gear mechanism gives it a high power rating,
reduced vibration and increased durability.
SI-1345B
SI-1325A
263mm
265mm
259mm
SHINANO
58mm
47mm
49mm
½” STANDARD RATCHET WRENCH
½” STANDARD RATCHET WRENCH
½” STANDARD RATCHET WRENCH
REAR EXHAUST / VARIABLE SPEED
/ POLYMER BODY COVER
FRONT EXHAUST
REAR EXHAUST / VARIABLE SPEED
/ POLYMER BODY COVER
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
16mm
170rpm
115Nm/85ft lb
85L/min 3.0cfm
1/4” NPT
1.21kg
42mm
½” version of SI-1261.
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
16mm
160rpm
90Nm/66ft lb
71L/min 2.5cfm
1/4”NPT
1.17kg
44mm
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Similar tool to SI-1320A only with a ½” anvil
and increased torque.
16mm
160rpm
115Nm/85ft lb
71L/min 2.5cfm
1/4” NPT
1.15kg
42mm
Similar to SI-1345B only with a ½” anvil.
Enquire about hexagon sockets for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-22
Specifications subject to change without notice. E&OE. ©
RATCHET WRENCHES
SI-1435
SI-1288S
23
58mm
45mm
½” LARGE RATCHET WRENCH
THROUGH RATCHET WRENCH
FRONT EXHAUST / HEAVY DUTY
17MM HEX. DR. / REAR EXHAUST
BOLT CAPACITY
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
BOLT CAPACITY
20mm
140rpm
160Nm/118ft lb
133L/min 4.7cfm
1/4”NPT
1.95kg
48mm
FREE SPEED
MAX. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Larger sized heavy duty industrial tool for use
where higher torques are required. Applications
include truck bullbars, structural steel work,
guard rails, lighting poles, electric transmission
towers and plough blades.
10mm
180rpm
45Nm/33ft lb
54L/min 1.9cfm
1/4” NPT
0.54kg
33mm
RATCHET WRENCHES
211mm
368mm
Industrial quality ring type ratchet wrench with special insert
sockets and high rundown speed for tightening operations
where long studs or threaded rods are involved. Also used in
confined spaces such as aluminium window assembly.
Available insert sockets are 8mm, 10mm, 11mm, 12mm,
13mm, 14mm and 3/8” sq.drive
Available special versions of this tool are: 13mm hex, 14mm
hex, 15mm hex
SI-1288SK
211mm
SHINANO
THROUGH RATCHET WRENCH KIT
45mm
INCLUDES SI-1288S, 6 SOCKETS & 3/8” SQ. DR. ADAPTOR
BOLT CAPACIT Y
STD. SOCKETS
OPTIONS
FREE SPEED
MA X. TORQUE
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
10mm
8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 3/8” Sq. Dr.
11mm, 13mm 3/8” Sq. Dr.
180rpm
45Nm/33ft lb
54L/min 1.9cfm
1/4” NPT
0.54kg
33mm
SI-1288S in kit form.
Enquire about hexagon sockets for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-23
SANDERS
SI-2700
SI-2700L
SANDERS
24
140mm
230mm
170mm
170mm
10MM BELT SANDER
10MM LONG-BELT SANDER
SPEED CONTROLLER OPTIONAL
SPEED CONTROLLER OPTIONAL
BELT SIZE
BELT SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
BELT SIZE
10 x 330mm
1100m/min
467L/min 16.5cfm
¼” NPT
0.82kg
84mm
BELT SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
A robust tool for use with standard abrasive
cloth belts or surface finishing belts. Used for
light grinding, deburring, cleaning, finishing
and polishing in tight locations and on small
items. Can be used on most materials including
metals, plastics, wood and fibreglass. Arm
angle is easily adjusted to suit the job.
Front pulley
New model 10mm belt sander with longer arm
for access into hollow work. This arm can also be
used on convex surfaces such as pipe and tube.
Arm rotates 120° for operating convenience. Also
features a variable speed throttle. Uses are similar
to SI-2700.
SI-2800
SI-2700LS
10 x 460mm
1100m/min
467L/min 16.5cfm
¼” NPT
0.85kg
84mm
SI-2830
220mm
230mm
170mm
Idler Pulley
215mm
170mm
170mm
SHINANO
Front pulley
13MM LONG BELT SANDER
20MM BELT SANDER
30MM BELT SANDER
SPEED CONTROLLER OPTIONAL
SPEED CONTROLLER OPTIONAL
SPEED CONTROLLER OPTIONAL
BELT SIZE
BELT SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
13 x 460mm
1100m/min
467L/min 16.5cfm
¼” NPT
0.9kg
WIDTH
Similar to SI-2700L but with 13mm wide belt.
Uses are similar to SI-2700L except that the
wider belt gives a wider sanding surface. Ideal
for spot weld grinding.
BELT SIZE
BELT SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
20 x 520mm
2500m/min
538L/min 19cfm
¼”NPT
1.43kg
102mm
Similar tool to SI-2700 but more powerful and
with 20mm wide belt for faster working. Used with
standard abrasive cloth belts or surface finishing
belts for light grinding, deburring, cleaning, finishing
and polishing in tight locations and on small items.
An optional idler pulley attachment is available
to enable the tool to be used on tubes and other
convex surfaces.
BELT SIZE
BELT SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
30 x540mm
1900m/min
750L/min 26.5cfm
¼”NPT
2.02kg
102mm
A robust high production sander with 30mm
wide belts. It makes larger deburring, cleaning,
finishing and polishing work easier. Fitted with
side handle for better operation.
For Idler Pulley model order SI-2800I
For sander belts, see page L-3
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-24
Specifications subject to change without notice. E&OE. ©
SANDERS
SI-2760
25
60MM BELT / DRUM SANDER
BELT SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
SANDERS
BELT SIZE
60 x 260mm
800m/min
481L/min 17cfm
1/4”NPT
1.2kg
108mm
Multi function belt sander for sanding larger
surface areas. Variety of different belts and
wheels available for sanding timber and polishing
metal products including stainless steel.
218mm
154mm
Accessory
Part No.
Accessory
Part No.
Contact Wheels for Sanding Belts
B Cloth Wheel (#600)
Rubber Contact
Felt Belt
(#400 to #600)
Sponge Contact
CWS-M
S Cloth Wheel
(#800)
Sanding Belts
80 grit
RB-80
180 grit
RB-180
Buffing Compound
(#400)(#600)(#800)
Sanding Equipments for Hairline Finish
HL Belt
(Coarse)
HLB-C
HL Belt
(Medium)
HLB-M
RB-400
Polishing Equipments for Mirror Finish
Sisal Wheel
(#400)
HLW-C
SHINANO
400 grit
HL Wheel
(Coarse)
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-25
SANDERS
SI-2050AGR
SI-2008
SANDERS
26
25MM QUICK CHANGE DISC SANDER
25MM BACKING PAD FOR EZ-LOC DISCS / ROLL THROTTLE
DISC SIZE
25mm
1/4” - 20
25000rpm
170L/min 6cfm
1/4” NPT
0.23kg
35mm
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS.
AIR INLET SIZE
NET WEIGHT
WIDTH
166mm
93mm
A miniature sander supplied with a quick change back-up
pad for quick and easy change of abrasive discs. Used for
fine and intricate sanding on small work.
50MM ANGLE DISC SANDER
50MM HOOK & LOOP BACKING PAD
DISC SIZE
Accessories
25mm Backing Pad, order IAT-205-6810K
25mm Abrasive Discs available in 8 grits:
36 grit, order IAT-205-5010K
40 grit, order IAT-205-5020K
50 grit, order IAT-205-5030K
60 grit, order IAT-205-5040K
80 grit, order IAT-205-5050K
100 grit, order IAT-205-5060K
120grit, order IAT-205-5070K
180grit, order IAT-205-5080K
SPINDLE THREAD
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
113mm
50mm dia
M6 x 1
13000rpm
397L/min 14cfm
¼”NPT
0.62kg
35mm
Heavy duty mini angle sander for sanding and
polishing small and difficult to access areas.
Supplied with 50mm sanding disc. Sponge pads
and wool buffs are optional extras.
53mm
SI-2009H
SI-2202
AI
AV
SI-2201R
LA
BL
E
SO
ON
144mm
120mm
135mm
SHINANO
96mm
50MM QUICK CHANGE DISC SANDER
75MM ANGLE DISC SANDER
75MM PISTOL DISC SANDER
50MM RUBBER BACKING PAD FOR EZ-LOK
DISCS / VARIABLE SPEED
75MM HOOK & LOOP BACKING PAD
VARIABLE SPEED
DISC SIZE
DISC SIZE
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
50mm dia
1/4” - 20
17000rpm
354L/min 12.5cfm
1/4” NPT
0.5 kg
50mm
50mm sander supplied with Ez-lok back-up pad
and adaptor for quick and easy change of abrasive
and surface conditioning discs. Used extensively
in the auto repair trade.
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
75mm dia
5/16” - 24
5000rpm
297L/min 10.5cfm
1/4” NPT
0.68kg
145mm
New model 75mm sander for slow speed
sanding or polishing. Supplied with 75mm hook
& loop pad as well as sponge and wool buffs.
Supplied with side handle for increased control.
DISC SIZE
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
75mm dia
1/4” - 20
14000rpm
354L/min 12.5cfm
1/4” NPT
0.46kg
WIDTH
New model pistol sander designed for removal of
surface rust and dressing welds in areas that are
hard to access. Ez-lok back-up pads available for
quick and easy changing of abrasive and surface
conditioning discs.
For Ez-lock back-up
pad order ...
For quick change backing pads see page L-22, For abrasive discs see pages L-3, L-5
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-26
Specifications subject to change without notice. E&OE. ©
SANDERS
SI-2210R
SI-2210
SI-2026
27
285mm
123mm
123mm
99mm
100MM PISTOL DISC SANDER
75MM QUICK CHANGE DISC SANDER
125MM ANGLE DISC SANDER
100MM FIBRE BACKING DISC FOR FIBRE DISCS
/ VARIABLE SPEED
75MM RUBBER BACKING PAD FOR EZ-LOK
DISCS / VARIABLE SPEED
125MM BACKING PAD FOR FIBRE DISCS
/ VARIABLE SPEED
DISC SIZE
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
100 x 22CH
7/16” - 20
18000rpm
552L/min 19.5cfm
1/4” NPT
0.99kg
95mm
A versatile high speed sander with built-in speed
regulator for paint removal, shaping body filler
patches, weld cleaning & smoothing, rust removal,
levelling, deburring stamped or machined parts,
blending dimensional mis-matches, grind line
conditioning, edge radiusing, cleaning & polishing
& final finishing of metals.
DISC SIZE
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
DISC SIZE
75mm dia
18000rpm
552L/min 19.5cfm
1/4” NPT
1.01kg
77mm
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Same as SI-2210 but supplied with 75mm Ez-lok
back-up pad and 3 grades of surface conditioning
discs.
Adaptor also available for TRIM-KUT discs
SI-2300
SANDERS
167mm
167mm
125 x 22CH
5/8” - 11
5000rpm
623L/min 22cfm
1/4” NPT
1.5kg
185mm
A lightweight tool for weld blending & finish
reworking in the automotive and white goods
industries. Also useful for general deburring,
cleaning and sanding in tight locations. Supplied
with 125mm backing pad for use with standard
125mm abrasive discs.
SI-2351
187mm
258mm
358mm
100mm
180MM VERTICAL DISC SANDER
180MM ANGLE DISC SANDER
178MM PLASTIC BACKING PAD FOR FIBRE
DISCS / VARIABLE SPEED
178MM PLASTIC BACKING PAD
FOR FIBRE DISCS
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
178 x 22CH
5/8” - 11
4000rpm
552L/min 19.5cfm
1/4” NPT
2.27kg
235mm
Suitable for general purpose jobs requiring full speed sanding. Uses
standard abrasive discs for roughing-in auto body filler, weld smoothing,
paint & rust removal. Can be used with surface conditioning discs for
deburring, cleaning & polishing metal, wood & plastics, upgrading machined
& scratched surfaces, gasket removal, parting line removal, corrosion
removal & preparation of surfaces for coatings & adhesives. Optional
Spiralcool rubber backing pad available.
DISC SIZE
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
178 x 22CH
5/8” - 11
4500rpm
581L/min 20.5cfm
1/4” NPT
2.12kg
330mm
Powerful heavy duty tool with spiral bevel gears and adjustable speed control. Used
for heavy rust removal, sanding of metal and shaping of automotive filler patches.
Optional Spiralcool rubber backing pads available. Can be fitted with backing pad for
use with surface conditioning discs for deburring, cleaning & polishing metal, wood &
plastics. Also takes 150mm straight and 100mm cupped wire brushes.
SHINANO
DISC SIZE
Also Available
For this tool with 14mm spindle thread, order SI-2351M14
For quick change backing pads and abrasive discs see page L-22, For Spiralcool backing pads see page L-24,
Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-27
SANDERS
SI-3001A
SANDERS
28
145mm
95mm
MINI ORBITAL PALM GRIP SANDER
LIGHT WEIGHT PLASTIC SKIRT / VARIABLE SPEED
PAD SIZE
PAPER SIZE
PAPER MOUNT
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
75 x 100mm
75 X 110mm
Hook & Loop or PSA
9000rpm
4mm
326L/min 12cfm
0.8kg
75mm
Standard duty miniature palm grip sander for one handed operation in
both woodworking and metalworking industries. Used for wet & dry
sanding to finer finishes in automotive and whitegoods finishing shops
when re-working small sections. Also suitable for use with surface
conditioning sheets for sanding, defuzzing & top coat rubbing on wood
and cleaning, sanding & polishing on metals. New triple pillar stud
system for greater power and durability
SI-3011A
SI-3003A
SELF VAC MINI ORBITAL
PALM GRIP SANDER
158mm
154mm
MINI ORBITAL PALM GRIP SANDER
LIGHT WEIGHT PLASTIC SKIRT / VARIABLE SPEED
SHINANO
HEAVY DUTY METAL SKIRT / VARIABLE SPEED
100mm
105mm
PAD SIZE
PAPER SIZE
PAPER MOUNT
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
75 x 100mm
75 X 110mm
Hook & Loop or PSA
9000rpm
4mm
354L/min 12.5cfm
1.15kg
75mm
Same as SI-3001A sander but with dust collection
system and portable collection bag. Can also be
connected to a vacuum system. Exhaust is piped
away. New triple pillar stud system for greater
power and durability
PAD SIZE
PAPER SIZE
PAPER MOUNT
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
75 x 100mm
75 X 110mm
Hook & Loop or PSA
8000rpm
4mm
397L/min 14cfm
1.05kg
75mm
Heavy duty miniature palm grip sander, similar to SI-3001A but heavier duty
and with metal skirt. Applications and uses are similar to SI-3001A. New
triple pillar stud system for greater power and durability.
Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-28
Specifications subject to change without notice. E&OE. ©
SANDERS
SI-3013A
SI-3007
SI-3018A
29
105mm
107mm
125mm
SELF VAC MINI ORBITAL
PALM GRIP SANDER
1/3 SHEET ORBITAL
PALM GRIP SANDER
1/3 SHEET SELF VAC BAR HANDLE
ORBITAL SANDER
HEAVY DUTY METAL SKIRT / VARIABLE SPEED
VARIABLE SPEED
VARIABLE SPEED / HEAVY DUTY
PAD SIZE
PAPER SIZE
PAPER MOUNT
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
75 x 100mm
75 X 110mm
Hook & Loop or PSA
7000rpm
4mm
326L/min 11.5cfm
1.46kg
76mm
Same as SI-3003A but with dust collection system
and bag. Can also be connected to a vacuum
system. Exhaust is piped away. New triple pillar
stud system for greater power and durability.
PAD SIZE
PAPER SIZE
PAPER MOUNT
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
95 x 175mm
100 X 180mm
Paper Clips
7500rpm
4.8mm
397L/min 14cfm
1.82kg
95mm
Heavy duty 1/3 sheet sander for production
use in the furniture industry. Takes standard
or stick-on papers. Can take papers or surface
conditioning sheets for rubbing down.
PAPER SIZE
PAPER MOUNT
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
95 x 175mm
100 X 180mm
Hook & Loop or PSA
7000rpm
4.8mm
439L/min 15.5cfm
2.31kg
96mm
Heavy duty, dust free 1/3 sheet sander supplied with
dust collection system and bag or can be connected
direct to a vacuum system. Dual handles provide
increased control. Mainly used in the furniture
manufacturing industry. Exhaust is piped away
SI-2108
SI-3200AS
SI-3300
PAD SIZE
SANDERS
343mm
182mm
249mm
70mm
166mm
75mm
169mm
182mm
38mm
30MM OSCILLATING SANDER
PAD SIZE
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
30mm dia
PSA
M6 x 1
600opm
142L/min 5cfm
1/4 NPT
0.57kg
40mm
Small oscillating sander designed for sanding or
polishing small or narrow surface areas. Used
mainly for polishing small scratches, bubbles and
marks or dust on auto panels and white goods
TRIANGLE PAD OSCILLATING SANDER
OSCILLATING ACTION / VARIABLE SPEED
PAD SIZE
PAPER MOUNT
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
70 x 75 x 75mm
Hook & loop
19000opm
340L/min 12cfm
1/4 NPT
0.65kg
70mm
50MM MINI DUAL ACTION SANDER
PAD SIZE
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
ORBIT DIA
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
Triangular pad sanders are ideal for sanding small
areas particularly into corners where circular pads
can’t get into. The sides of the pad are curved and
the edges bevelled making access to awkward
areas easy. An ideal tool for fine and intricate work
such as furniture, picture frames and kitchens.
48mm dia
Hook & loop
M6 x 1
12500rpm
3mm
340L/min 12cfm
1/4 NPT
0.62kg
39mm
Heavy duty 2” sander for small and confined areas.
Supplied with a wool and sponge buff that attach
straight onto the hook & loop backing pad for
polishing small areas or where access is difficult.
SHINANO
PAPER MOUNT
93mm
52mm
Enquire about abrasives for these tools. For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-29
SANDERS
SI-2107A
SANDERS
30
50MM MINI DUAL ACTION
SANDER/POLISHER
20MM THICK HOOK AND LOOP SPONGE PAD /
WOOL BUFF / HOOK AND LOOP SANDING DISCS
BACKING PAD SIZE
SPONGE PAD SIZE
WOOL BUFF SIZE
SANDING DISC SIZE
SPINDLE SIZE
ORBIT SIZE
FREE SPEED
MAX. AIR CONSUPMTION
AIR INLET SIZE
NET WEIGHT
BODY WIDTH
48mm dia
60mm dia
60mm dia
50mm dia
M6x1
3mm
8500 rpm
326L/min 11.5cfm
1/4” NPT
0.55kg
35mm
Mini angle head dual action polisher for buffing and
polishing small areas where space is limited and tight
convex surfaces where large pads cannot fit. Dual action
makes for easy operation and a good finish. High quality
gears give long tool life.
158mm
88mm
Attachment
Part No.
Backing Pad
262-21MD
Hook and Loop
Sanding DIscs
Available in 5 grits see page
Wool Buff
M-60
Sponge Buff
M-20X60/B
SI-2110
AI
AV
LA
E
BL
SO
ON
135mm
130mm
SHINANO
75MM DUAL ACTION
PISTOL GRIP SANDER
PAD SIZE
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
75mm dia
Hook & loop or PSA
5/16” 24
14000rpm
345L/min 12.5cfm
1/4 NPT
0.52kg
WIDTH
New model of 75mm pistol grip sander with rubber hand
grip for comfort and to reduce vibration. The durable ball
bearing design makes it smooth to operate.
Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-30
Specifications subject to change without notice. E&OE. ©
SANDERS
SI-3102
31
SANDERS
125mm
102mm
75MM MINI DUAL ACTION
PALM GRIP SANDER
PAD SIZE
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
ORBIT DIA
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
75mm dia.
Hook & loop
5/16” - 24
12000rpm
3mm
354L/min 12.5cfm
1/4 NPT
0.54kg
75mm
Compact palm grip sander, ideal for denibbing and
sanding small surface areas. Popular in the auto
panel trade.
SI-3100
SI-3112
136mm
75MM SELF VAC DUAL
ACTION PALM SANDER
102mm
HOOK & LOOP PAD / SELF VAC SYSTEM
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
ORBIT DIA
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
75mm
Hook & loop
5/16” - 24
12000rpm
3mm
354L/min 12.5cfm
1/4 NPT
0.89kg
75mm
Same as SI-3102 but with self vac dust collection system and
portable collection bag. Can also be connected to a vacuum
system. Exhuast is piped away.
131mm
FOAM / PLASTIC BACKING PAD
/ VARIABLE SPEED
PAD SIZE
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
150mm dia
Hook & loop or PSA
5/16” - 24
8000rpm
7mm
326L/min 11.5cfm
1.82kg
150mm
Popular multipurpose sander suitable for most sanding applications and
used in many industries including automotive, furniture, fibreglass and
other manufacturing plants. Bar handle allows two handed control.
SHINANO
PAD SIZE
261mm
150MM DUAL ACTION
BAR HANDLE SANDER
Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-31
SANDERS
SI-3101-6
SI-3100V
SANDERS
32
290mm
171mm
150MM CENTRAL VACUUM DUAL
ACTION BAR HANDLE SANDER
131mm
150MM DUAL ACTION
PALM GRIP SANDER
SI-3100 FITTED WITH VACUUM TAKE
OFF ACCESSORIES
PAD SIZE
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
114mm
LIGHT WEIGHT PLASTIC SKIRT
/ VARIABLE SPEED
150mm dia
Hook & loop or PSA
5/16” - 24
8000rpm
7mm
326L/min 11.5cfm
2.04kg
150mm
PAD SIZE
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
Same tool as SI-3100 but with dust extracting
accessories that can be connected to a remote
vacuum system for a better working environment.
Industrial palm grip finishing sander for use in the
furniture, fibreglass, whitegoods and automotive
industries. Compact size, lightweight and low vibration
allow maximum operator comfort and productivity.
SI-3105-6
SI-3103-6A
150mm dia
Hook & loop or PSA
5/16” - 24
10000rpm
5mm
312L/min 11cfm
0.92kg
150mm
SI-3111-6
184mm
165mm
307mm
110mm
125mm
118mm
150MM DUAL ACTION
PALM GRIP SANDER
150MM DUAL ACTION
BAR HANDLE SANDER
SELF VACUUM DUAL
ACTION PALM GRIP SANDER
HEAVY DUTY METAL SKIRT / VARIABLE SPEED
HEAVY DUTY MODEL / VARIABLE SPEED
LIGHT WEIGHT PLASTIC SKIRT / SELF VACUUM
SYSTEM / VARIABLE SPEED
SHINANO
PAD SIZE
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
150mm dia
Hook & loop or PSA
5/16” - 24
8200rpm
5mm
397L/min 14cfm
1.20kg
150mm
PAD SIZE
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
150mm
Hook & loop or PSA
5/16” - 24
9000rpm
6mm
425L/min 15cfm
1.67kg
150mm
PAD SIZE
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
A heavy duty industrial palm grip finishing sander
for use in the furniture, fibreglass, whitegoods and
automotive industries. Compact size, lightweight
and low vibration maximise operator comfort and
productivity.
A powerful heavy duty tool for industrial use.
Silenced through- handle exhaust. Special pads
are available for surface conditioning discs. Can be
used to finish wood, fibreglass or metal.
150mm
Hook & loop or PSA
5/16” - 24
9500spm
5mm
326L/min 11.5cfm
1.27kg
150mm
Same tool as SI-3101-6 but with dust
collection system and portable collection bag.
Can also be connected to a vacuum system.
For 150mm backing pads, see page L-22, Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-32
Specifications subject to change without notice. E&OE. ©
SANDERS
SI-3115R-6
SI-3113-6A
SI-3118-6
33
308mm
150MM GEARED PALM GRIP SANDER
SELF VACUUM DUAL
ACTION PALM GRIP SANDER
SELF VACUUM
HEAVY DUTY METAL SKIRT / VARIABLE SPEED
PAD SIZE
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
WIDTH
116mm
132mm
110mm
150mm
Hook & loop or PSA
5/16” - 24
8000rpm
5mm
340L/min 12cfm
1.59kg
150mm
Same tool as SI-3103-6A but with dust
collection system and portable collection bag.
Can also be connected to a vacuum system.
Exhaust is piped away.
SI-2322WR-E
PAD SIZE
PAPER MOUNT
FREE SPEED
ORBIT DIA
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
SANDERS
166mm
273mm
SELF VACUUM DUAL ACTION
BAR HANDLE SANDER
HEAVY DUTY / VARIABLE SPEED
150mm dia
Hook & loop
1000rpm
4.4mm
326L/min 11.5cfm
1/4” NPT
1.49kg
150mm
PAD SIZE
PAPER MOUNT
SPINDLE THREAD
FREE SPEED
ORBIT DIA
MAX AIR CONS
NET WEIGHT
Low speed, high torque sander for heavy sanding
work in large areas. Gear mechanism increases
the machines power and reduces the possibility of
leaving a circular pattern in the job than a single
action sander. Supplied with a dust extraction hose
and bag. Can be connected to a central vacuum
system. Exhaust is piped away.
WIDTH
150mm
Hook & loop or PSA
5/16”- 24
9500rpm
6mm
411L/min 14cfm
2.15kg
150mm
A heavy duty tool fitted with a dust collection system
and a portable collection bag. Muffled throughhandle exhaust for quieter operation. Special pads
available for surface conditioning discs. Can be used
to sand wood, fibreglass or metal.
Available with punch plate
for perforating paper discs.
SI-2451W
SI-2351W
390mm
390mm
230mm
115mm
115mm
93mm
80MM ANGLE WET
DISC SANDER
180MM ANGLE WET
DISC SANDER
180MM SLOW SPEED ANGLE
WET DISC SANDER / POLISHER
HOLLOW SPINDLE / CENTRE WATER FEED
PAD EXTRA
HOLLOW SPINDLE / CENTRE WATER FEED
HOLLOW SPINDLE / CENTRE WATER FEED
SPINDLE THREAD
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
NET WEIGHT
WIDTH
80mm
M14 x 2.0
5000rpm
566L/min 20cfm
1.3kg
122mm
Wet sander used for sanding small areas on
ceramic and glass products and all materials
requiring sanding with water. Front handle
provides greater control in operation. Used mainly
in the stone, marble and glass industries.
For pad, order 110A-80E
FREE SPEED
MAX AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
5/8” - 11
4500rpm
581L/min 20.5cfm
1/4 NPT
2.47kg
175mm
Heavy duty wet sander with 178mm plastic
backing pad for sanding large surface areas
on materials where water is required such
as stone, marble, and glass. Also used in
the auto panel industry for sanding two pack
paints. Handle can be used on either side.
SPINDLE THREAD
FREE SPEED
MAX AIR CONS
NET WEIGHT
WIDTH
5/8” - 11
2300rpm
552L/min 19.5cfm
2.48kg
175mm
Slow speed wet tool for sanding and
polishing stone, marble, glass and other
similar products. Supplied with 178mm
plastic backing pad for large surface areas
and side handle can be used on either side.
Also Available
For this tool with 14mm spindle thread, order SI-2451WM14
Also Available
For this tool with 14mm spindle thread,
order SI-2351WM14
SHINANO
PAD SIZE
For 150mm backing pads, see page L-22, Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-33
SAWS
SI-4700B
SI-4710
SAWS
34
259mm
257mm
69mm
72mm
RECIPROCATING SAW
RECIPROCATING SAW / FILE
SAW BLADES AVAILABLE WITH 14, 18, 24
0R 32 TEETH PER INCH
TAKES MINIATURE FLAT, ROUND OR
RECTANGULAR FILES AS WELL AS SAW BLADES
CUTTING CAPACITY
FREE SPEED
STROKE
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
3mm Mild Steel
10000rpm
10mm
170L/min 6cfm
¼” NPT
0.58kg
36mm
CUTTING CAPACITY
FREE SPEED
STROKE
FILE OPENING
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
A versatile lightweight tool, which enables one-handed
operation in cutting auto body, panels, sheet metal,
aluminum, plastics, fibreglass and wood. Uses 32tpi blade
for sheet metal, 24tpi for metal up to 3mm, 18tpi for plastic
and 14tpi for timber. Automotive applications include cutting
double skin sections such as door sills, wheel arches, chassis
sections, rear panels, etc. Also used for sun roofs, speaker
holes and L.P. gas openings. This is one of the longest selling
tools in the automotive repair market.
3mm Mild Steel
10000rpm
10mm
5mm
142L/min 5cfm
¼” NPT
0.80kg
36mm
Heavier duty than SI-4700B. Similar applications but
can also take miniature files for small filing jobs such as
door lock openings, square holes etc. Files are available
separately as flat, round or triangular.
SI-4730
SI-4300
256mm
203mm
68mm
62mm
RECIPROCATING SAW / FILE
OSCILLATING SAW
AIR MOTOR DRIVEN FOR SMOOTH OPERATION
FITTED WITH DEPTH-OF-CUT GAUGE
SHINANO
CUTTING CAPACITY
FILE OPENING
FREE SPEED
STROKE
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
5mm Mild Steel
5mm
6000rpm
8mm
425L/min 15cfm
¼” NPT
0.92kg
36mm
The SI-4730 has a rotary air motor, not a piston like
the other two models. This means its operation is
smoother, the motor is less likely to stall and there
is less vibration and lower noise. This tool is best for
continuous cutting where operator fatigue is to be
minimised. Takes files as well as saw blades.
BLADE SIZE
CUTTING DEPTHS
OSCILLATING SPEED
MAX. AIR CONS
NET WEIGHT
WIDTH
Blades
63mm Ø
2, 4, or 6mm
20 000spm
397L/min 14cfm
0.89kg
42mm
Designed for cutting auto body panels. Two
different blades are supplied, 508-45A for cutting
larger areas and 508-45B is for where small,
specific pieces of metal need to be cut for fitting
locks, handles or trims etc. The depth-of-cut
gauge allows the operator to cut a specific depth
and thus not damage anything else below the
surface of the panel skin.
Segment Blade,
order 508-45B
Full Circle Blade,
order 508-45A
For saw blades, see page L-14, For files, see page L-20
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-34
Specifications subject to change without notice. E&OE. ©
SCREWDRIVERS
SI-1130A
SI-1161
SI-1140
35
203mm
247mm
71mm
53mm
23mm
3MM STRAIGHT SCREWDRIVER
4MM STRAIGHT SCREWDRIVER
6MM STRAIGHT SCREWDRIVER
PUSH START / REVERSIBLE / ADJUSTABLE
SLIP CLUTCH / ¼” HEX DR.
REVERSIBLE / ADJUSTABLE SLIP CLUTCH
/ ¼” HEX DR.
REVERSIBLE / ADJUSTABLE SLIP CLUTCH
/ ¼” HEX DR.
SCREW CAPACITY
MAX. TORQUE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
3mm
0.8Nm/0.6ft lb
2000rpm
23.0L/min 0.8cfm
1/8” NPT
0.29kg
23mm
Compact screwdriver with push actuated throttle
and reversing switch. Designed for overhead
suspension from a balancer or hand held operation.
Used in light assembly work in the manufacture
of electronic and electrical appliances, toys,
household and hardware items, etc. Can be fitted
with a wide range of screwdriver bits and sockets.
SI-5305AQC
SCREW CAPACITY
MAX. TORQUE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
4mm
1.5Nm/1.1ft lb
1700rpm
23L/min 0.8cfm
¼” NPT
0.62kg
35mm
Medium sized screwdriver with push actuated
throttle and reversing switch. Designed for overhead
suspension from a balancer or
hand held operation. Used in light assembly work
in the manufacture of electronic or electrical
appliances, toys, household and hardware items etc.
Adjustable clutch gives torque control.
SI-1166A
SCREW CAPACITY
MAX. TORQUE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
SCREWDRIVERS
177mm
6mm
5Nm/3.7ft lb
1600rpm
80L/min 2.8cfm
¼” NPT
1.12kg
40mm
A full sized industrial screwdriver with lever
throttle, reversing switch, and adjustable clutch
for torque control. Can be suspended from an
overhead balancer or used in the hand. Applications
include assembly work in the manufacture of
appliances, furniture, aluminum windows, small
machines,lighting fixtures, etc.
SI-1166-8A
182mm
228mm
207mm
149mm
152mm
152mm
5MM PISTOL SCREWDRIVER
6MM PISTOL SCREWDRIVER
8MM PISTOL SCREWDRIVER
REVERSIBLE / NO CLUTCH / ¼ ” HEX DR.
REVERSIBLE / ADJUSTABLE SLIP CLUTCH
/ ¼” HEX DR.
REVERSIBLE / ADJUSTABLE SLIP CLUTCH
/ ¼” HEX DR.
SCREW CAPACITY
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
5mm
2000rpm
111L/min 3.9cfm
¼” NPT
1.05kg
42mm
SCREW CAPACITY
MAX. TORQUE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
Pistol screwdriver with no clutch for
applications where full throttle is always
required. Thumb actuated reversing switch
for one handed operation.The shortest of the
screwdrivers making it ideal for tighter areas.
Applications are similar to SI-1166A but where
torque settings are not necessary.
WIDTH
6mm
5Nm/3.7ft lb
2000rpm
99L/min 3.5cfm
¼” NPT
1.18kg
40mm
An industrial quality screwdriver with adjustable
clutch and thumb actuated reversing switch for
one-handed operation. Used for high speed
screwdriving in a wide range of assembly applications
including household appliances, electrical goods,
window frames, shower and fly screens, sheet metal
products, metal and timber furniture, metal house
frames, metal roof and wall sheeting etc.
SCREW CAPACITY
MAX. TORQUE
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
8mm
9Nm/6.6ft lb
800rpm
94L/min 3.3cfm
¼” NPT
1.35kg
41mm
Similar tool to SI-1166 but slower speed for higher
torque in heavier work such as large wood screws
and slower run-down in normal work.
SHINANO
FREE SPEED
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-35
SEALANT CUTTER
SI-3200AK
SEALANT CUTTER / SHEARS
36
SEALANT KNIFE
OSCILLATING ACTION / VARIABLE SPEED
STD. BLADE
FREE SPEED
AV. AIR CONS
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
57mm offset
19000spm
68L/min 2.4cfm
340L/min 12cfm
¼”NPT
0.67kg
42mm
182mm
65mm
Mainly used for cutting sealant around auto windscreens and glass panels when being
replaced. A range of different knives is available. See pages L-15, L-16.
SHEARS
SI-45
SI-4500
DOUBLE CUT SHEET METAL SHEAR
CAPACITY
BLADE SPEED
MIN. RADIUS
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
DOUBLE CUT SHEAR HEAD ONLY
CAPACITY
MIN. RADIUS
WIDTH
CL AMP DIA
WIDTH
1.6mm Mild Steel
2600spm
200mm
496L/min 17.5cfm
¼” NPT
1.26kg
45mm
230mm
153mm
1.6mm Mild Steel
200mm
48mm
38mm
Used for cutting, trimming and outlining of sheet plastics,
tin plate, aluminum and other metals. Capacity in sheet
steel is 1.0 to 1.6mm. Double cutting action with central
waste curl leaves both sides of the cut straight and clean
without distortion. Useful in tinsmith and sheet metal
shops, auto body repair shops, fibreglass factories, sheet
metal duct manufacture as well as steel and aluminum
roofing, and siding installation.
Easily attaches to SI-5500 drill and other brands
of straight drill of appropriate speed. Same
applications as SI-4500.
Replacement blades:
Centre 160-2 > Right 160-3 > Left 160-4
SI-5300SS
SI-5300FC
HEAVY DUTY SCISSOR SHEAR
FIXED BOTTOM BLADE TO RUN ALONG BENCH /
FORGED BLADE HOUSING
SHINANO
HEAVY DUTY FIBRE CEMENT SHEAR
BLADE SPEED
FORGED BLADE HOUSING
MIN. RADIUS
CAPACITY
BLADE SPEED
MIN. RADIUS
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
1/2” Fibre Cement Sheet
2000spm
40mm
510L/min 18cfm
¼” NPT
1.46kg
45mm
Designed for cutting up to ½” Fibre Cement Sheet fast
without airborne dust and with minimal cleanup. Shinano
tool with a Kett shear head.
Replacement blades:
Centre Blade 160-2 > Right Blade 160-3 > Left Blade 160-4.
MAX. AIR CONS
AIR INLET SIZE
240mm
NET WEIGHT
WIDTH
2000spm
40mm
510L/min 18cfm
¼” NPT
1.46kg
45mm
250mm
145mm
155mm
Ideally suited for cutting a wide range of pliable sheet materials,
certain carpet, carpet underlay, foam rubber, linoleum, vinyl,
woven wood, fabric, etc. and even those heavier jobs like 18
gauge wire mesh, ¼” soft plastic or rubber, rigid PVC and other
plastics to 1/8” thick. The unique scissors action cuts light
materials without fouling or gouging. Handles heavy foil, light
insulated wire, hardware cloth and mesh screening with ease.
Shinano tool with Kett head.
Replacement blades:
Moving Upper 41-21> Fixed bottom 41-22
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-36
Specifications subject to change without notice. E&OE. ©
SHEARS
SI-5500E
SI-5300PS
37
HEAVY DUTY DOUBLE CUT SHEAR
CAPACITY
BLADE SPEED
MIN. RADIUS
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
1.9mm Mild Steel
2000spm
200mm
510L/min 18cfm
¼” NPT
1.82kg
45mm
SINGLE BLADE SHEET METAL SHEAR
CAPACITY
BLADE SPEED
225mm
MIN. RADIUS
150mm
MAX. AIR CONS
AIR INLET SIZE
Cuts up to 14 gauge in cold rolled steel and will easily cut 18 gauge
and lighter sheet metal at up to 450cm per minute. The waste curl
leaves both sides of the cut straight and clean with no distortion. No
filing or burring is necessary. Ideal for a sheet metal worker, roofer,
or auto body shop. Good for duct work and for aluminum and steel
siding installation. Shinano tool with Kett head.
NET WEIGHT
WIDTH
1.6mm Mild Steel
2600spm
40mm
354L/min 12.5cfm
¼” NPT
1.38kg
53mm
245mm
155mm
This tool has similar applications to the SI-4500 but does
not have a central waste curl and is capable of a much
tighter radius when cutting curves. Shinano tool with
Excalibur head.
Replacement blades:
SHEARS / SPOT MILLS
FORGED BLADE HOUSING
Centre 40-21 > Right 60-22R > Left 60-22L
SPOT MILLS
SI-5800
STRAIGHT SPOT MILL
8MM COLLET CAPACITY
END MILLING CAPACITY
FREE SPEED
AV. AIR CONS
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
8mm
1600rpm
85L/min 3cfm
425L/min 15cfm
¼” NPT
1.80kg
43mm
303mm
Used for drilling out spot welds to replace automotive panels in
auto body repairs. Drilling depth is easily adjusted
130mm
Replacement parts:
8mm End Mill Cutter 271-17
SI-5850A
PISTOL SPOT MILL
END MILLING CAPACITY
FREE SPEED
AV. AIR CONS
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
8mm
2000rpm
37L/min 1.3cfm
184L/min 6.5cfm
¼” NPT
1.40kg
150mm
SHINANO
8MM COLLET CAPACITY
202mm
136mm
Same use as SI-5800 but without limitation of the
arm so that spot welds that are not on the edge of
the panels can be drilled out.
Replacement parts:
8mm End Mill Cutter 271-17
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
D-37
TORQUE RATCHET WRENCH
SI-6000A
TRIMMER/ROUTER / TORQUE RATCHET WRENCH
38
½” TORQUE RATCHET WRENCH
360° ROTATIONAL EXHAUST / VARIABLE
TORQUE SETTINGS / LED TORQUE DISPLAY
TORQUE R ANGE
90-140Nm / 66-103ft lb
150rpm
391L/min 13.8cfm
¼” NPT
1.86kg
54mm
FREE SPEED
AV. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
This all new Shinano Torque Wrench combines the speed
of a ratchet wrench with the accuracy of a torque wrench.
Nuts can be tightened to torque settings between 90Nm and
140Nm accurately and are shown on a LED torque indicator
on the tool. The 360° rotational exhaust allows the operator
to position the direction of the exhaust where it will not be
harmful or a hindrance. The SI-6000A comes in a carry case
with 3 long sockets for undoing nuts on alloy wheels without
damaging the wheel and a swivel joint which reduces strain
on the operator’s wrist. 3 AA batteries are required to
operate the LED display. Designed for use on alloy wheels
but can be used wherever torque control is required within
this torque range.
445mm
65mm
TRIMMER/ROUTER
SI-2018A
LAMINATE TRIMMER / ROUTER
FULLY ADJUSTABLE GUIDES
COLLET SIZE
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
¼”
22000rpm
595L/min 21cfm
¼”NPT
0.91kg
74mm
Used for fast accurate trimming and bevelling of plastic
laminates. May be operated vertically or horizontally.
SHINANO
177mm
TRANSLOTS
STRAIGHT GROOVES
SCARF JOINTS
U-GROOVES
ROUNDED SURFACES
V-GROOVES
SASHES
DOVETAIL GROOVES
113mm
Enquire about router bits & trimmer cutters. For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
D-38
Specifications subject to change without notice. E&OE
E&OE. ©
NOTES
39
NOTES
SHINANO
Specifications subject to change without notice. E&OE. ©
D-39
NOTES
SHINANO
NOTES
40
D-40
Specifications subject to change without notice. E&OE. ©
SECTION E
CHIPPING HAMMERS
DRILLS
GRINDERS
MOTORS
1
PILE CUTTERS
RAMMERS
SANDERS
SAWS
SURFACE CONDITIONERS
TOP CAT
AIR TOOLS
•
Made in the USA Top Cat Air Tools embody the highest
levels of strength and durability and are suitable for the
most demanding industrial applications.
•
The selection of sanders and grinders shown on the
following pages is far from the full Top Cat range. If
you are looking for a tool with different specifications
to those shown, please ask, as it is highly likely we can
come up with one that meets your requirements.
•
With regard to the tools that are shown, Top Cat, being
a relatively small and specialised manufacturer, offers
numerous variations in output shaft threads, handles
etc. Again, please let us know what you are looking for.
•
Sold in Australia for over 25 years, these tools have
become known for their reliability and after sales support.
•
Top Cat tools are backed up by large stocks of spare
parts and fully equipped workshop facilities.
TOP CAT CONTENTS
TOOLS
Drills
Floor Drills
Floor Drills
Floor Drills
Drills - “D” Handle
Drills - “D” Handle
Angle Drill
Angle Drill
Grinders
Grinders
Grinders
Grinders
Grinders
Grinders
Grinders
Grinders
Air Motors
Air Motors
Pile Cutters
Sanders
Sanders
Sanders
Saws
Surface Conditioners
Surface Conditioners
Configurations
Straight
10mm
13mm
19mm
13mm
19mm
10mm
13mm
¼ Die
¼ Die Extended
Die - Angle
Cone Wheel
Horizontal
Bench
Vertical
Angle Grinder
Range
Specification
Straight
Angle
Vertical
Diamond Air Saw
Horizontal Finisher / Polisher
Right Angle Polisher
TOP CAT
CONTENTS
2
PAGE
E-2
Specifications subject to change without notice. E&OE. ©
3
3
4
4
5
5
5
5
6
7
8
9
11
13
14
15
16
16
17
18
18
19
19
20
20
21
DRILLS - STRAIGHT
400D8MKSR;2500;3/8
400D21MKSR;900;1/2
3
13MM STRAIGHT DRILL
STEEL BODY / REAR EXHAUST / SAFETY LEVER THROTTLE /
10MM KEYED CHUCK
STEEL BODY / REAR EXHAUST / SAFETY LEVER THROTTLE /
13MM KEYED CHUCK
293mm
DRILLING CAPACITY
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
10mm (steel)
900W 1.2HP
2500rpm
990L/min 35cfm
3/8”NPT
13mm ½”I.D.
1.7kg
41mm
Strong, heavy duty tool with many industrial applications.
Can be gang mounted for multiple hole jobs. Can also be
ordered with speeds of 550, 900, 4200 & 5500 rpm.
280mm
DRILLING CAPACITY
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
13mm (steel)
900W 1.2HP
900rpm
990L/min 35cfm
3/8”NPT
13mm ½”I.D.
1.9kg
41mm
Strong, heavy duty tool with many industrial applications. Can be gang
mounted for multiple hole jobs. Can also be ordered with speeds of 550,
2500, 4200 & 5500rpm.
DRILLS - STRAIGHT / DRILLS - FLOOR
10MM S
STRAIGHT DRILL
DRILLS - FLOOR
400FD8MK; 2500; 3/8
10MM FLOOR DRILL
STEEL BODY / SIDE EXHAUST / SAFETY LEVER
THROTTLE / 10MM KEYED CHUCK
DRILLING CAPACITY
FREE SPEED
POWER
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
Heavy duty drill designed for multiple drilling into
floors and decks without the need for the operator
to bend over. Can also be ordered with speeds of
550, 900, 4200 & 5500rpm.
TOP CAT
BODY DIA
10mm (steel)
2500rpm
900W 1.2HP
990L/Min 35cfm
3/8”NPT
13mm ½”I.D.
3.6kg
50mm
898mm
For Drill Chucks, see page L-19
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
E-3
DRILLS - FLOOR
507FD1MK;1750;1/2
1/2
DRILLS - FLOOR
4
13MM FLOOR DRILL
ALUM/STEEL BODY / SIDE EXHAUST / SAFETY
AFETY
LEVER THROTTLE / 13MM KEYED CHUCK
K
DRILLING CAPACITY
FREE SPEED
POWER
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIA
13mm (steel)
1750rpm
1119W 1.5HP
990L/Min 35cfm
1/2”NPT
13mm ½”I.D.
4.6kg
64mm
898mm
Similar to 400FD but with more powerful motor and
larger chuck for drilling larger holes.
0;3/4
520FD1MK;1500;3/4
19MM FLOOR DRILL
TOP CAT
ALUM/STEEL BODY / SIDE EXHAUST / SAFETY
UCK
LEVER THROTTLE / 19MM KEYED CHUCK
DRILLING CAPACITY
FREE SPEED
POWER
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIA
19mm (steel))
1500rpm
1500W 2.0HP
1133L/Min 40cfm
1/2”NPT
13mm ½”I.D.
5.3kg
74mm
898mm
Similar to 507FD but with more powerful motor and
larger chuck for drilling larger holes.
For Drill Chucks, see page L-19
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
E-4
Specifications subject to change without notice. E&OE. ©
DRILLS - "D" HANDLE
507D2M;500;3/4
500D2M;1000;1/2
00D2M;1000;1/2
5
152mm
152mm
13MM STRAIGHT DRILL
19MM STRAIGHT DRILL
STEEL BODY / ALUMINIUM “D” HANDLE /
ADJUSTABLE SIDE HANDLE / 13MM KEYED CHUCK
STEEL BODY / ALUMINIUM “D” HANDLE / ADJUSTABLE
SIDE HANDLE / 20MM KEYED CHUCK
DRILLING CAPACITY
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
DRILLING CAPACITY
13mm (steel)
1500W 1.5HP
1000rpm
990L/min 35cfm
½”NPT
13mm ½”I.D.
4.90kg
64mm
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
Powerful, heavy duty tool for construction sites,
refineries, oil rigs, fabrication shops, etc.
20mm (steel)
1500W 1.5HP
500rpm
990L/min 35cfm
½”NPT
13mm ½”I.D.
4.95kg
64mm
Similar to 500D2M but with slower speed for larger drill bits.
DRILLS - "D" HANDLE / DRILLS - ANGLE
458mm
443mm
DRILLS - ANGLE
400DRA5MKSR;2000;3/8
;2000;3/8
400DRA8MKSR;1200;1/2
13MM ANGLE
GLE DRILL
STEEL BODY / REAR EXHAUST / SAFETY LEVER THROTTLE /
10MM KEYED CHUCK
STEEL BODY / REAR EXHAUST / SAFETY LEVER
THROTTLE / 13MM KEYED CHUCK
246mm
DRILLING CAPACITY
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
10mm (steel)
900W 1.2HP
2000rpm
990L/min 35cfm
3/8”NPT
13mm ½”I.D.
2.5kg
41mm
Strong, powerful, compact tool for use in fabrication shops, ship yards, oil rigs,
mines, etc. Can also be ordered with speeds of 260, 440, 1200 & 2700rpm.
246mm
DRILLING CAPACITY
POWER
FREE SPEED
125mm
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
13mm (steel)
900W 1.2HP
1200rpm
990L/min 35cfm
3/8”NPT
13mm ½”I.D.
2.7kg
41mm
125mm
TOP CAT
10MM ANGLE DRILL
Same as 400DRA5 but with slower speed for larger drill bits. Can also
be ordered with speeds of 260, 440, 2000 & 2700rpm.
For Drill Chucks, see page L-19
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
E-5
GRINDERS - DIE
GC25K
40AGKS;22000;1/4
GRINDERS - DIE
6
148mm
¼” DIE GRINDER
ALUMINIUM BODY / FRONT EXHAUST /
SAFETY LEVER THROTTLE
COLLET
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
147mm
mm
¼” DIE GRINDER
ALUMINIUM BODY / SIDE EXHAUST /
SAFETY LEVER THROTTLE
STD COLLET
¼”
300W 0.4HP
25000rpm
510L/Min 18cfm
¼”NPT
10mm 3/8”I.D
0.41kg
36mm
COLLET OPTIONS
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
Compact, lightweight, economy, die grinder for general purpose die
grinding, deburring, flash removal and finishing using carbide burrs,
mounted stones, polishing wheels, etc.
400GEKSR;20000;1/4
¼”
6mm, 1/8”, 3mm
675W 0.9HP
22000rpm
852L/min 30cfm
1/4”NPT
10mm 3/8”I.D
0.7kg
41mm
Compact heavy duty die grinder used in die shops, fabrication industry,
foundries, shipyards, machinery and equipment shops, etc. Applications
include heavy duty rotary filing, weld grinding, deburring, flash removal,
blending, cleaning and polishing. Also used to power remote controlled
machines in the pipe re-lining industry.
400HGEKSR;20000;1/4
191mm
m
¼” DIE GRINDER
¼” DIE GRINDER
STEEL BODY / REAR EXHAUST / SAFETY LEVER THROTTLE
OTTLE
/ SINGLE FRONT BEARING
STEEL BODY / REAR EXHAUST / SAFETY LEVER
THROTTLE / DOUBLE FRONT BEARING
STD COLLET
TOP CAT
210mm
COLLET OPTIONS
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
¼”
3/8”, 10mm, 5/16”,
8mm, 6mm, 1/8”, 3mm
900W 1.2HP
20000rpm
990L/min 35cfm
3/8”NPT
13mm ½”I.D
1.1kg
41mm
Powerful, heavy duty die grinder with similar applications
to 40AGKS but where extra power is needed.
STD COLLET
COLLET OPTIONS
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
¼”
3/8”, 10mm, 5/16”,
8mm, 6mm, 1/8”, 3mm
900W 1.2HP
20000rpm
990L/min 35cfm
3/8”NPT
13mm ½”I.D
1.1kg
42mm
Similar tool to 400GEKSR;20000;1/4 but a heavier duty
tool with double front bearing for extra load capacity.
For Carbide Burrs see section N
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
E-6
Specifications subject to change without notice. E&OE. ©
GRINDERS - DIE - EXTENDED
4002AGHKS;20000;1/4
400SHKSR;20000;1/4
7
¼” DIE GRINDER
¼” EXTENDED DIE GRINDER
STEEL BODY / REAR EXHAUST / SAFETYY LE
LEVER
THROTTLE / TRIPLE FRONT BEARING
STEEL BODY / SIDE EXHAUST /
SAFETY LEVER THROTTLE
STD COLLET
COLLET OPTIONS
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
¼”
3/8”, 10mm, 5/16”,
8mm, 6mm, 1/8”, 3mm
900W 1.2HP
20000rpm
990L/Min 35cfm
3/8”NPT
13mm ½”I.D
1.5kg
42mm
Powerful, heavy duty die grinder with similar
applications to 400HGEKSR;20000;1/4 but with triple
front bearing for extreme load capacity.
STD COLLET
COLLET OPTIONS
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
¼”
3/8”, 10mm, 5/16”,
8mm, 6mm, 1/8”, 3mm
675W 0.9HP
20000rpm
852L/Min 30cfm
1/4”NPT
13mm ½”I.D
1.75kg
42mm
GRINDERS - DIE - EXTENDED
335mm
270mm
Versatile extended die grinder designed to reach into deep areas for
medium duty grinding using burrs or mounted points. Used in many
industries including foundries, fabrication shops, shipyards, etc.
400GHDKSR;20000;1/4
¼” EXTENDED DIE GRINDER
STEEL BODY / REAR EXHAUST /
SAFETY LEVER THROTTLE
TLE / SINGLE FRONT BEARING
STD COLLET
COLLET OPTIONS
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
¼”
3/8”,, 10mm
3/8
3/8”
10mm, 5/16”
5/16
5/16”,,
8mm, 6mm, 1/8”, 3mm
900W 1.2HP
20000rpm
990L/min 35cfm
3/8”NPT
13mm ½”
2.1kg
41mm
TOP CAT
BODY DIAMETER
327mm
Simliar to 4002AGHKS;
S; 20000; 1/4 but with
increased power for those more demanding and
heavier applications.
For Carbide Burrs see section N
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
E-7
GRINDERS - DIE - EXTENDED
400EHKSRD+13;20000;1/4
8
GRINDERS
¼” EXTENDED DIE GRINDER
954mm
STEEL BODY / REAR EXHAUST / SAFETY LEVER THROTTLE
/ TRIPLE FRONT BEARING
STD COLLET
COLLET OPTIONS
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
¼”
3/8”, 10mm, 5/16”,
8mm, 6mm, 1/8”, 3mm
900W 1.2HP
20000rpm
990L/min 35cfm
3/8”NPT
13mm ½”
2.3kg
41mm
Similar applications to 400GHDKSR
but with 330mm extension
to access deeper areas. Also
4mm
available with 660mm and 914mm
extensions.
GRINDERS
- DIE - ANGLE
DE
GR12K
GR20K
K
155mm
155mm
TOP CAT
¼” LOW SPEED RIGHT
ANGLE DIE GRINDER
ALUMINIUM BODY / FRONT EXHAUST /
SAFETY LEVER THROTTLE
COLLET SIZE
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIA
¼”
300W 1/4HP
12,000rpm
510L/Min 18CFM
¼”NPT
10mm 3/8”I.D.
0.54kg
36mm
Compact, light weight, economy, right angle die grinder for
general purpose die grinding, de-burring, flash removal, surface
conditioning, polishing, etc. using all forms of abrasive.
66mm
¼” HIGH SPEED RIGHT
ANGLE DIE GRINDER
ALUMINIUM BODY / FRONT EXHAUST /
SAFETY LEVER THROTTLE
COLLET
¼"
POWER
300W 0.4HP
20000rpm
510L/Min 18cfm
¼”NPT
10mm 3/8”I.D.
0.54kg
36mm
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
66mm
Compact, lightweight, economy, right angle die grinder for general
purpose die grinding, deburring, flash removal and finishing using
carbide Burrs, mounted stones, polishing wheels, etc.
WARNING: MOS of abrasive wheels must exceed free speed of tools. Enquire about abrasives for these tools. For Carbide Burrs see section N
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
E-8
Specifications subject to change without notice. E&OE. ©
GRINDERS – DIE – ANGLE
410RAEDKSR;13000;1/4
4
9
STEEL BODY / REAR EXHAUST /
SAFETY LEVER THROTTLE
STD COLLET
COLLET OPTIONS
POWER
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
¼”
3/8”, 10mm, 5/16”,
8mm, 6mm, 1/8”, 3mm
900W 1.2HP
13000rpm
990L/min 35cfm
3/8”NPT
13mm ½”I.D
1.6kg
42mm
Heavy duty industrial right angle die grinder for
material removing jobs in hard to reach areas and
confined spaces. Used extensively in die shops,
fabrication shops, foundries, shipyards, machinery
and equipment shops and all industries where a
heavy duty tool is required. Handle can be moved
to the side as required.
m
77mm
277mm
GRINDERS – CONE WHEEL
400GH1KSR;20000;3/8-24
GRINDERS – DIE – ANGLE / GRINDERS - CONE WHEEL
¼” RIGHT ANGLE DIE GRINDER
40MM CONE WHEEL GRINDER
STEEL BODY / REAR EXHAUST / SAFETY LEVER THROTTLE
SPINDLE THREAD
POWER
FREE SPEED
MAX. AIR CONS
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
Powerful, compact, heavy duty grinder designed
ed
to run Cone Wheels type 16, 17, 17R, 18, 18R &
19 fitted with integral metal bushings having a
3/8”UNF internal thread.
318mm
mm
TOP CAT
AIR INLET SIZE
3/8”UNF
900W 1.2HP
20000rpm
990L/Min 35cfm
3/8”NPT
13mm ½’I.D
D
2.1kg
42mm
WARNING: MOS of abrasive wheels must exceed free speed of tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
E-9
GRINDERS – CONE WHEEL
511HKS;18000;5/8-11
GRINDERS – CONE WHEEL
10
435mm
50MM CONE WHEEL GRINDER
STEEL BODY / SIDE EXHAUST / SAFETY LEVER THROTTLE
SPINDLE THREAD
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIAMETER
5/8”WHIT.
1119W 1.5HP
18000rpm
1048L/Min 37cfm
½”NPT
13mm ½’I.D.
3.3kg
63.5mm
Heavy duty grinder designed to run Cone Wheels type
16, 17, 17R, 18, 18R & 19 fitted with integral metal
bushings having a 5/8” WHITWORTH internal thread.
5201HKCW;12000;1/2-13
63MM CONE WHEEL GRINDER
STEEL BODY / SIDE EXHAUST / SAFETY LEVER THROTTLE
TOP CAT
SPINDLE THREAD
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY E X TN. DIA
475mm
½”UNC
1500W 2.0HP
12000rpm
1135L/Min 40cfm
½”NPT
13mm ½”I.D.
3.9kg
73mm
Powerful heavy duty grinder designed to run Cone Wheels
type 16, 17, 17R, 18, 18R & 19 fitted with integral metal
bushings having a ½” UNC internal thread.
WARNING: MOS of abrasive wheels must exceed free speed of tools. Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
E-10
Specifications subject to change without notice. E&OE. ©
GRINDERS – HORIZONTAL
IZONT
407GH4KSR;15000;401
5000;401
40GHK;301
0GHK;301
11
50MM HORIZONTAL GRINDER
80MM HORIZONTAL GRINDER
ALUMINIUM BODY / SIDE EXHAUST / SAFETY LEVER THROTTLE
STEEL BODY / REAR EXHAUST / SAFETY LEVER THROTTLE
MAX WHEEL SIZE
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
MAX WHEEL SIZE
50 x 20 x 9.53
675W 0.9HP
18000rpm
852L/min 30cfm
¼”NPT
9.5mm 3/8”
1.5kg
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
2” horizontal grinder used in a variety of applica
applications in die shops,
rds, machinery and equ
fabrication, foundries, shipyards,
equipment shops, etc.
5201HKS;9000;401
HKS;9000;401
80 x 13 x 9.53
900W 1.2HP
15000rpm
990L/min 35cfm
3/8”NPT
13mm ½”I.D.
2.2kg
GRINDERS - HORIZONTAL
351mm
334mm
Similar applications to 40GHK but has a slower speed and increased
power for more demanding applications. Steel body for greater durability.
K;9000;401
56HK;9000;401
550mm
548mm
100MM HORIZONTAL GRINDER
STEEL BODY / SIDE EXHAUST /
SAFETY LEVER THROTTLE
ALUMINIUM BODY / SIDE EXHAUST /
SAFETY LEVER THROTTLE
MAX. WHEEL SIZE
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
BODY DIA.
100 x 25 x 15.88
1500W 2.0HP
9000rpm
1135L/Min 40cfm
½”NPT
13mm ½”I.D.
5.3kg
73mm
Heavy duty grinder for cleaning castings, smoothing,
finishing, snagging welds, removing scale, rust and weld
spatter. Used in a variety of applications in fabrication shops,
refineries, foundries, ship yards, steel mills, etc.
MAX. WHEEL SIZE
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
100 x 25 x 15.88
2250W 3.0HP
9000rpm
1698L/Min 60cfm
½”NPT
13mm ½”I.D.
5.8kg
More powerful tool than 5201HKS, this grinder is
suitable for heavy duty applications where a 100mm
dia. wheel is to be used. Suitable for fettling castings,
snagging welds, removing weld spatter, etc.
TOP CAT
100MM HORIZONTAL GRINDER
WARNING: MOS of abrasive wheels must exceed free speed of tools. Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
E-11
GRINDERS – HORIZONTAL
65HK;6000;601
56HK;6000;601
6HK;6000;601
GRINDERS – HORIZONTAL
12
567mm
550mm
150MM HORIZONTAL GRINDER
RINDER
150MM HORIZONTAL GRINDER
ALUMINIUM BODY / SIDE EXHAUST /
SAFETY LEVER THROTTLE
ALUMINIUM BODY / SIDE EXHAUST /
SAFETY LEVER THROTTLE
MAX WHEEL SIZE
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
150 x 25 x 15.88
2250W 3.0HP
6000rpm
1698L/min 60cfm
1/2”NPT
13mm ½”I.D.
5.8kg
Heavy duty grinder for cleaning castings, smoothing,
finishing, snagging welds, removing scale, rust and weld
splatter. Used for a variety of applications in fabrication
shops, refineries, foundries, shipyards, steel mills, etc.
MAX. WHEEL SIZE
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
150 x 25 x 15.88
3000W 4.0HP
6000rpm
2118L/min 75cfm
1/2”NPT
13mm ½”I.D.
6.4kg
Similar uses to 56HK but with extra 750W of power for
heavier and more demanding applications.
65HK;4000;801
567mm
TOP CAT
200MM HORIZONTAL GRINDER
ALUMINIUM BODY / SIDE EXHAUST /
SAFETY LEVER THROTTLE
MAX. WHEEL SIZE
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
200 x 25 x 15.88
3000W 4.0HP
4000rpm
2123L/Min 75cfm
½”NPT
13mm ½”
6.4kg
Powerful tool with large wheel for large jobs in
fabrication shops, refineries, foundries, ship
yards, steel mills, mines, etc.
WARNING: MOS of abrasive wheels must exceed free speed of tools. Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
E-12
Specifications subject to change without notice. E&OE. ©
GRINDERS – BENCH
66VBG;6000;9
13
GRINDERS – BENCH
341mm
290mm
200MM HIGH SPEED BENCH GRINDER
STEEL FRAME / ALUMINIUM MOTOR HOUSING /
ADJUSTABLE SPARK ARRESTOR / ADJUSTABLE WORK REST
FREE SPEED
SPINDLE DIA
MAX. WHEEL SIZE
POWER
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
6000rpm
15.88mm
235 X 25 X 15.88
3000W 4HP
2124L/Min 75cfm
½” NPT
13mm ½” I.D.
23.5kg
Strong, powerful, compact machine ideal for use in harsh
exposed environments such as mineral exploration sites, ship
yards, open cut mines, and heavy fabrication shops. Uses high
speed hand grinder wheels.
662VBG;3300;9
341mm
324mm
200MM LOW SPEED BENCH GRINDER
STEEL FRAME / ALUMINIUM MOTOR HOUSING /
ADJUSTABLE SPARK ARRESTOR / ADJUSTABLE WORK REST
SPINDLE DIA
MAX. WHEEL SIZE
MAX. BRUSH SIZE
POWER
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
TOP CAT
FREE SPEED
3300rpm
15.88mm
235 X 25 X 25
235 X 25 X 25
3000W 4HP
2124L/Min 75cfm
½” NPT
13mm ½” I.D.
26kg
Similar to 66VBG but geared down to slower speed to allow the
use of both grinding wheels and wire brushes. Applications are
the same as 66VBG.
WARNING: MOS of abrasive wheels must exceed free speed of tools. Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
E-13
GRINDERS - VERTICAL
520VXK;8000;727
GRINDERS - VERTICAL
14
180MM VERTICAL GRINDER
TAKES TYPE 27 GRINDING WHEELS / SAFETY LEVER THROTTLE
WHEEL SIZE
POWER
OUTPUT SHAFT
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
180 x 6 x 22.2CH
1500W 2.0HP
5/8”-11
8000rpm
1134L/min 40cfm
½”NPT
13mm ½”I.D.
3.0kg
198mm
Takes type 27 grinding wheels as well as backing pads with 5/8”-11
thread for medium duty sanding, polishing, blending smoothing
etc. Variety of applications in machinery equipment, construction,
fabrication and drum reconditioning.
54VK;8000;727
180MM VERTICAL GRINDER
TAKES TYPE 27 GRINDING WHEELS / SAFETY LEVER THROTTLE
WHEEL SIZE
POWER
OUTPUT SHAFT
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
180 x 6 x 22.2CH
2250W 3.0HP
5/8”-11
8000rpm
1698L/min 60cfm
½”NPT
13mm ½”I.D.
3.9kg
205mm
Heavy duty grinder for smoothing, finishing, descaling, removal
of rust and weld splatter, cleaning castings and masonry
work. Variety of applications in fabrication shops, refineries,
shipyards, steel mills, construction sites, etc.
64VK;6000;927
TOP CAT
230MM VERTICAL GRINDER
TAKES TYPE 27 GRINDING WHEELS / SAFETY LEVER THROTTLE
WHEEL SIZE
POWER
OUTPUT SHAFT
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
230 x 6 x 22.2CH
3000W 4.0HP
5/8”-11
6000rpm
2124L/min 75cfm
½”NPT
13mm ½”I.D.
5.0kg
223mm
Similar applications to 54VK but with 9” guard and an extra 750W of
power for extra heavy duty applications.
WARNING: MOS of abrasive wheels must exceed free speed of tools. Vertical grinders are the ideal choice for your big material removal jobs.
These tools have become a mainstay in foundries, shipyards and fabrication shops all over the globe due to their extreme reliability in even the worst of
conditions. Many other models and variations are available on indent order. Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
E-14
Specifications subject to change without notice. E&OE. ©
GRINDERS - ANGLE
400RA4KSR;10000;427
15
100MM ANGLE GRINDER
WHEEL SIZE
POWER
OUTPUT SHAFT
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
100 x 6 x 16CH
900W 1.2HP
3/8”-24
10000rpm
990L/min 35cfm
3/8”NPT
13mm ½”I.D.
1.4kg
GRINDERS - ANGLE
SAFETY LEVER THROTTLE / STEEL BODY / TAKES GRINDING, CUT-OFF OR
TYPE 27 DEPRESSED CENTRE WHEELS
79mm
Powerful 4” angle grinder for tough industrial
applications in foundries, shipyards, metal
fabrication shops, power stations and steel mills.
Used for close-quarter grinding or sanding where
rapid removal of material is necessary. Steel body
for greater durability.
277mm
400RAE2KSR;10000;527
125MM ANGLE GRINDER
SAFETY LEVER THROTTLE / STEEL BODY / TAKES GRINDING,
CUT-OFF OR TYPE 27 DEPRESSED CENTRE WHEELS /
MULTIPLE POSITION SIDE HANDLE
WHEEL SIZE
POWER
OUTPUT SHAFT
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
125 x 6 x 22.2CH
900W 1.2HP
5/8”-11
10000rpm
990L/min 35cfm
3/8”NPT
13mm ½”I.D.
1.4kg
80mm
202mm
WIDTH
Similar to 400RA4 but with 5” guard and extended body for
where extra reach is required. Also available with 4” guard.
520RA2XKTKW;6000;927
230MM ANGLE GRINDER
SAFETY LEVER THROTTLE / ALUMINIUM BODY / TAKES GRINDING,
CUT-OFF OR TYPE 27 DEPRESSED CENTRE WHEELS
POWER
OUTPUT SHAFT
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
230 x 6 x 22.2CH
1500W 2HP
5/8”-11
6000rpm
1134L/min 40cfm
1/2”NPT
13mm ½”I.D.
3.6kg
96mm
Powerful 9” tool built to handle the toughest jobs. These grinders are a
mainstay in foundries, shipyards and fabrication shops worldwide and all
areas where heavy grinding, cutting, flash removal, descaling, cleaning,
chamfering, etc is required. This machine is built to do the hard yards.
381mm
TOP CAT
WHEEL SIZE
Also available with 180mm guard and free speed of 8000rpm - order
520RA2XKTKW;8000;727
WARNING: MOS of abrasive wheels must exceed free speed of tools. Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
E-15
MOTORS
TOP CAT AIR MOTORS
MOTORS
16
TOP CAT offers a wide range of
air motors to meet a variety of
applications.
Power outputs and other variables can
be combined to find just the right motor
to meet your needs.
520 H2 ML
520H3MFT
664-I-FT
520H2MFT
500H(X)1MSFT
500H(X)1MRFT
664-2-G
520H1MFT
500 H3 ML
500H1MFT
SPECIFICATIONS FOR TOP CAT AIR MOTORS
PRODUCT
THROTTLE TYPE
POWER OUTPUT
OPERATING SPEED
400H3M*
5500 R.P.M.
400H5M*
4200 R.P.M.
400H8M*
2500 R.P.M.
400H16M*
400H21M*
400H36M*
(L) Lever,
(K) Safety Lever or
(FT) Flow Through Inlet
MAXIMUM BODY
DIAMETER
WORKING AIR
CONSUMPTION
CLAMP DIAMETER
FOR MOUNTING
1200 R.P.M.
1.2.H.P. (900W)
900 R.P.M.
1.94 Inch (49.3mm)
1.61 inch (41mm)
550 R.P.M.
35cfm (991L/min)
400H74M*
260 R.P.M.
400H98M*
200 R.P.M.
400H164M*
120 R.P.M.
500H1M*
4000 R.P.M.
500H2M*
1.5.H.P. (1125 W)
500H3M*
520H1M
520H2M
520H3M
(L) Lever,
(K) Safety Lever
(B) Thumb Switch
(G) Spade Handle or
(FT) Flow Through Inlet
1000 R.P.M.
2.5 inch (63.5mm)
250 R.P.M.
2.25 inch (58mm)
3000 R.P.M.
2.0.H.P. (1500 W)
750 R.P.M.
3.0 inch (76.2mm)
45 cfm (1274L/min)
4.63 inch
(117.6mm)
80cfm (2265L/min)
190 R.P.M.
1200 R.P.M.
664H1M
4.0.H.P. (3000 W)
180 R.P.M.
664H2M
4 Bolt Front Mount Only
TOP CAT
*Governed versions are available. Contact us for details. Shaft threads and keyways can be specified within certain limits according to shaft diameter.
OTHER OUTPUT OPTIONS
The table above gives each member of the TOP CAT family of Air Motors in its standard form.
Motor specifications can be further varied by the use of the outputs illustrated below.
Enquire about your special needs or applications.
5/8 - 11
x 2.1 inch
5/8 - 11
x 1.0 inch
1/2 - 13
x 2.1 inch
5/8 - 11
x 1.0 inch
(No Flange)
7/8 - 14
x 1.0 inch
1/2 - 20
x 0.44 inch
3/4 Inch
Drill Chuck
TOP CAT has a variety of standard
threaded outputs in stock. We can
manufacture custom threaded outputs
to meet your requirements.
A selection of drill chucks and keyed
shafts are shown. Custom designs can
be fabricated to adapt to your needs.
1 Inch
Keyed Shaft
1/2 Inch
Keyed Shaft
3/4 Inch
Drill Chuck
5/8 Inch
Keyed Shaft
For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
E-16
Specifications subject to change without notice. E&OE. ©
PILE CUTTERS
56PCK;6000;841
17
PILE CUTTERS
200MM PILE CUTTER
186mm
SAFETY LEVER THROTTLE
WHEEL SIZE
200mm x 22.2CH
2250W 3.0HP
5/8”-11
6000rpm
1699L/Min 60cfm
½”NPT
13mm ½”I.D.
3.9kg
POWER
OUTPUT SHAFT
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
Used by Marine and Bridge Contractors. Takes
bonded abrasive or segmented diamond wheels.
Wet attachment optional.
66PCK;5000;1241
300MM PILE CUTTER
SAFETY LEVER THROTTLE
202mm
WHEEL SIZE
300mm x 22.2CH
3000W 4.0HP
5/8”-11
5000rpm
2124L/Min 75cfm
½”NPT
20mm 3/4”I.D.
5kg
POWER
OUTPUT SHAFT
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
Same use as 56PCK;841 but takes 12” bonded
abrasive or segmented diamond wheels for greater
depth of cut. For same model with 6000rpm order
66PCK;6000;1241. Wet attachment optional.
66PCK;4000;1441
350MM PILE CUTTER
WHEEL SIZE
POWER
OUTPUT SHAFT
FREE SPEED
MA X. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
202mm
TOP CAT
SAFETY LEVER THROTTLE
350mm x 22.2CH
3000W 4.0HP
5/8”-11
4000rpm
2124L/Min 75cfm
½”NPT
20mm 3/4”I.D.
5.5kg
Same as 66PCK;1241 but takes 14” bonded
abrasive or segmented diamond wheels for greater
depth of cut. For same model with 5000rpm order
66PCK;5000;1441. Wet attachment optional.
WARNING: MOS of abrasive wheels must exceed free speed of tools. Enquire about blades for Pile Cutters. For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
E-17
SANDERS - STRAIGHT
400GH3MKSRT5/8;5500
500H1MKT5/8;4000
SANDERS - STRAIGHT / SANDERS-ANGLE
18
457mm
408.5mm
HORIZONTAL SANDER
HORIZONTAL SANDER
STEEL BODY / REAR EXHAUST /
SAFETY LEVER THROTTLE
SIDE EXHAUST / SAFETY LEVER THROTTLE
POWER
POWER
FREE SPEED
OUTPUT SHAFT
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
900W 1.2HP
5500rpm
5/8”-11
990L/min 35cfm
3/8”NPT
1/2"
2.4kg
FREE SPEED
OUTPUT SHAFT
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
1500W 1.5HP
4000rpm
5/8”-11
990L/min 35cfm
½”NPT
13mm ½”
2.9kg
Same as the previous model but with a more powerful
motor and slower speed for more aggressive sanding and
surface conditioning. Inflatable drum or expanding wheel
not included.
Used with inflatable or expanding wheels which take
sanding or surface conditioning bands for use on metal
or timber surfaces. Other speeds available. Inflatable
drum or expanding wheels not included.
SANDERS - ANGLE
TOP CAT
4620RA3MKSR;4000;7SP
3MKSR;4000;7SP
520RA2XKTKW;6000;9SP
;
;
180MM RIGHT ANGLE SANDER
230MM RIGHT ANGLE SANDER
REAR EXHAUST / SAFETY LEVER THROTTLE / STEEL BODY/
MULTIPLE POSITION SIDE HANDLE
SAFETY LEVER THROTTLE / 230MM SANDING PAD
ALSO AVAILABLE / MULTIPLE POSITION SIDE HANDLE
POWER
FREE SPEED
OUTPUT SHAFT
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
POWER
900W 1.2HP
4000rpm
5/8”-11
990L/min 35cfm
3/8”NPT
13mm ½”
3.1kg
Lighter tool for descaling and paint
removal from metal surfaces where a
right-angle head is preferred.
FREE SPEED
OUTPUT SHAFT
MAX. AIR CONS
AIR INLET SIZE
96mm
AIR HOSE REQD
NET WEIGHT
342mm
1500W 2.0HP
6000rpm
5/8”-11
1134L/min 40cfm
½”NPT
13mm ½”
3.6kg
Powerful tool for heavy sanding and descalingg
of metal surfaces. Can also be purchased
with 180mm sanding pad & guard - order
520RA2XKTKW;8000;7SP
96mm
381mm
Special Notice Top Cat Horizontal and Right Angle Sanders are available in speeds ranging from 1500rpm to 26000rpm to suit abrasive discs from
25mm to 235mm diameter. If you have a special requirement we are confident we can supply the right tool for the job.
Enquire about abrasives for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
E-18
Specifications subject to change without notice. E&OE. ©
SANDERS - VERTICAL
510VK;4000; 7SP
56SK;6000;9SP
19
180MM VERTICAL SANDER
230MM VERTICAL SANDER
FRONT EXHAUST / SAFETY LEVER THROTTLE
FRONT EXHAUST / SAFETY LEVER THROTTLE
POWER
FREE SPEED
OUTPUT SHAFT
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
SANDERS - VERTICAL / SAWS
m
179mm
175mm
1125W 1.5HP
4000rpm
5/8”-11
990L/min 35cfm
½”NPT
13mm ½”I.D.
2.7kg
Used for cleaning scale and paint off steel
sections and drums.
POWER
FREE SPEED
OUTPUT SHAFT
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
2250W 3.0HP
6000rpm
5/8”-11
1699L/Min 60cfm
½”NPT
13mm ½”I.D.
3.6kg
Used for heavy duty cleaning, stripping and descaling.
SAWS
510WG
662VBW;14
4
230MM ABRASIVE /
DIAMOND AIR SAW
360MM ABRASIVE
DIAMOND AIR SAW
W
AVAILABLE WITH WET ATTACHMENT
GOVERNED / AVAILABLE WITH
TH WET
ATTACHMENT AND 305MM (12”) GUARD
CUTTING DEPTH
POWER
MAX. AIR CONS
OUTPUT SHAFT
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
WIDTH
HEIGHT
Heavy duty saw for uses requiring a 9” abrasive or diamond blade for
cutting metal, stone, concrete, asphalt, plastics and ceramic material.
Optional wet grinding attachment reduces dust and lubricates cutting
surface. Image shown with wet attachment. Not to be used with wood
cutting blades. These require a full spring loaded retractable guard.
CUTTING DEPTH
POWER
FREE SPEED
MAX. AIR CONS
OUTPUT SHAFT
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
WIDTH
HEIGHT
109mm
3000W 4.0HP
3300rpm
2124L/min 75cfm
1” Spline
½”NPT
13mm ½”
12.8kg
285mm
448mm
Heavy duty saw for demanding jobs requiring a 14” blade for
cutting metal, stone, concrete, asphalt, plastics and ceramic
material. Also available with a 12” guard. Extensive applications
in construction and fabrication industries. Optional wet grinding
attachment reduces dust and lubricates cutting surface. Not
suitable for use with wood cutting blades. These require a full
spring loaded retractable guard.
TOP CAT
FREE SPEED
64mm
1130 W 1.5HP
4000rpm
990L/min 35cfm
5/8-11
½”NPT
13mm ½”
6.3kg
235mm
187mm
Enquire about Blades for the saws on this page.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
E-19
SURFACE CONDITIONERS
ONDIT
400GH8MKSRS1;2500
KSRS1;2500
520H1MKS1;3000
SURFACE CONDITIONERS
20
407mm
435mm
HORIZONTAL FINISHER / POLISHER
HORIZONTAL FINISHER / POLISHER
STEEL BODY / REAR EXHAUST / SAFETY LEVER THROTTLE - 1” OR
5/8” SURFACE CONDITIONING WHEEL ADAPTOR
GOVERNED / SIDE EXHAUST / SAFETY LEVER THROTTLE
/ 1 OR 5/8” SURFACE CONDITIONING WHEEL ADAPTOR
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
POWER
900W 1.2HP
2500rpm
990L/min 35cfm
3/8”NPT
13mm ½”
2.4kg
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
Slow speed tool designed to take surface conditioning wheels for
finishing, blending and matching of surfaces in stainless steel, aluminium
copper and brass. Can also be adapted to take calico buffs for final
finishing with polishing compounds.
1500W 2.0HP
3000rpm
1134L/min 40cfm
½”NPT
13mm ½”
3.8kg
More powerful slower speed tool for similar applications to previous
model. Available in speeds from 1500rpm.
4520RA3MKSR;2000
520H2MKS1;750
342mm
TOP CAT
407mm
HORIZONTAL POLISHER
180MM
80MM RIGHT ANGLE POLISHER
GOVERNED / SIDE EXHAUST / SAFETY LEVER THROTTLE / 1” OR 5/8”
SURFACE CONDITIONING WHEEL ADAPTOR
STEEL BODY / REAR EXHAUST / SAFETY LEVER THROTTLE /
MUTLIPLE POSITION SIDE HANDLE
POWER
FREE SPEED
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
1500W 2.0HP
750rpm
1134L/min 40cfm
½”NPT
13mm ½”
3.8kg
POWER
FREE SPEED
OUTPUT SHAF T
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE REQD
NET WEIGHT
Slower tool than previous model for extra fine finishing in
the same applications. Available in speeds from 375rpm.
900W 1.2HP
2000rpm
5/8”-11
990L/min 35cfm
3/8”NPT
13mm ½”
3.0kg
Slow speed tool fitted with buffing bonnet
for use with various compounds to blend and
polish painted and plain metal surfaces.
Special Notice TOP CAT Horizontal and Right Angle Surface Conditioning Tools are available in speeds ranging from 375rpm to 1000rpm to
suit wheels and mops to 200mm diameter. If you have a special requirement we are confident we can supply the right tool for the job.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
E-20
Specifications subject to change without notice. E&OE. ©
TOP CAT OPTIONS AND CONFIGURATIONS
21
OPTIONS AND CONFIGURATIONS
TOP CAT Air Tools come in a wide range of models and configurations
as shown in the following illustrations. If you see anything of interest
do not hesitate to contact us.
Various head configurations for small right angle sanders.
Top Cat Sanders and Surface Conditioning
Tools are mostly available with steel or
aluminium bodies. Where available, steel
bodies are standard. The choice of case
material affects the weight and durability of
the tool. By its nature, aluminium is lighter
in weight than steel. Steel is more durable in
aggressive environments.
Guards for various tools
TOP CAT
The ER Heavy Duty insert type collet which is available
on 400GH series tools.
Spindle types for mounting of cone wheel abrasives.
Specifications subject to change without notice. E&OE. ©
E-21
TOP CAT OPTIONS AND CONFIGURATIONS
OPTIONS AND CONFIGURATIONS
22
Several different handle styles are offered on top Cat horizontal and vertical tools. The picture above shows each in detail.
GOVERNED VS. NON-GOVERNED
TOP CAT
A governor on a tool will help to maintain a high level of torque at lower operating speeds. If your application requires a lower
operating speed or higher operating load then a governor may be of benefit. Governors are generally available on metal
removal and surface finishing tools with free speeds below 15000rpm.
EXHAUSTED OPTIONS
Top Cat tools are available with various exhaust directions. Generally rear exhaust is standard.
E-22
Specifications subject to change without notice. E&OE. ©
SECTION F
PNEUMATIC
NUTRUNNERS
PNEUMATIC
NUTRUNNER
ACCESSORIES
AMERICAN
ASSEMBLY
TOOLS
NUTRUNNERS
•
The A.A.T. line of pneumatic nutrunners offers many models
to suit most industrial assembly applications. This catalogue
contains a small selection of the most popular models from
the range.
•
There are many factors to be taken into account when
selecting the right nutrunner for the job and if you are unable
to find a suitable model on the following pages please do not
hesitate to ask.
•
Precision made in America, these tools offer the highest
levels of performance and durability and can be expected to
give years of reliable service.
•
All A.A.T. Nutrunners sold in Australia are backed up by
spare parts and service ability.
1
CONTENTS - AAT NUTRUNNERS
TOOLS
Pneumatic
Nutrunners
Pneumatic
Nutrunners
Pneumatic
Nutrunners
Pneumatic
Nutrunners
Pneumatic
Nutrunners
Pneumatic
Nutrunners
Pneumatic
Nutrunners
Explanatory Notes
3
Product Overview
4
3/8” Angle
5
½” Angle
5
¾” Angle
5
1” Flathead
7
Applications
7
AAT - NUTRUNNERS
CONTENTS
2
PAGE
F-2
Specifications subject to change without notice. E&OE. ©
EXPLANATORY NOTES
3
HOLDING OPTIONS
A.A.T. Nutrunners are a large range of pneumatic
nut and bolt tightening tools for industrial
applications. Nutrunners are also used for such
diverse applications as tightening large valves,
positioning coils on uncoiling machines and rotating
shafts and mandrels for alignment on winding
machines.
A.A.T. Nutrunner options include straight, flat angle
or right angle head; manual or automatic shut-off;
push start or lever actuated; reversible or nonreversible, and models vary with torque ratings from
10Nm to 2000Nm.
There are many factors which enter into the
selection of a nutrunner and it is not possible to
stock all available models to meet every need. It
is therefore recommended that you contact us
with your requirements so that a cost estimate
can be prepared for a tool which will best suit your
application.
A.A.T. Nutrunners can be either hand held or
fixture held. Hand held nut runners are fitted with
a hand grip and lever throttle control. Fixture held
nutrunners contain no throttle control valves and are
started by introducing air to the inlet port. Fixture
held models come with a clamping bracket which
can be welded or bolted to a mounting frame.
SPEED-SHIFT
Shut-off options include Stall Type, Pressure
Activated Control (PAC) and Accu-brake Clutch.
PRODUCT OVERVIEW
The following page gives an overview of the many
combinations of motors, controls, gearing and
outputs available to create an A.A.T. Nutrunner
customized to meet your specific needs. As it is
not a viable option to stock such a large range of
specialized tools, most of those listed can only
be supplied against special order with an upfront deposit. We do, however, stock a number
of Standard Models for which we have found an
on-going demand. These are described in general
terms in the following paragraph and in detail on
later pages in this Catalogue.
STANDARD MODELS
The most commonly supplied A.A.T. Nutrunners
are hand held stall type models with size 2 or size
3 motors and angle head outputs . These Standard
Models are described in detail on the following
pages.
Specifications subject to change without notice. E&OE. ©
AAT - NUTRUNNERS
A special feature available in the A.A.T. range of
nutrunners is “Speed-shift”. High torque nutrunners
are notoriously slow, 25rpm at 2000Nm being
typical, and this can take up valuable production
time. With Speed-shift or Double Speed-shift
gearboxes the tightening process can be between 3
and 20 times faster and air consumption reduced to
between one third and one tenth of that of standard
nutrunners. With this simple mechanism the tool
downshifts from a high run-down speed to a slower
speed for final tightening. Shifting is dependent
only on torque and is completely automatic. If the
running torque spikes above the shift point during a
run down – say because of a damaged thread – the
nutrunner will shift down without stopping and up
again when the damaged thread is cleared. If there
is a prevailing torque on the fastener, such as with a
plastic insert, a ratio must be selected that can drive
the prevailing torque without shifting down.
SHUT-OFF OPTIONS
EXPLANATORY NOTES
GENERAL
F-3
PRODUCT OVERVIEW
AAT - NUTRUNNERS
PRODUCT OVERVIEW
4
This overview represents only a fraction of A.A.T.’s nutrunner possibilities. There are hundreds
of combinations of motors and controls, gearing and outputs available to create a tool
customized to fit your needs. Listed below are examples of A.A.T.’s motor and operator
control combinations along with their most practical torque range. Contact us to help
determine what tool is best suited to fill your needs.
MOTOR TYPE
MOTOR SIZE
PRODUCT DESIGNATION
SHUT-OFF CONTROL
START TYPE
TORQUE RANGE – NM
Angle
In-line
AIR
2
H-Series
None (Stall)
External
10 - 240
10 – 150
AIR
2
H-Series + Speed Shift
None (Stall)
External
25 - 500
25 – 500
AIR
2
Stall
None (Stall)
Manual-Remote-Push
10 - 240
10 – 400
AIR
2
Stall + Speed Shift
None (Stall)
Manual-Remote-Push
25 - 680
25 - 1000
AIR
3
H-Series
None (Stall)
External
25 - 500
25 - 2000
AIR
3
H-Series + Speed Shift
None (Stall)
External
25 - 1350
25 - 2000
AIR
3
H-Series + Dbl Speed Shift
None (Stall)
External
325 - 1350
325 - 2000
AIR
3
Stall
None (Stall)
Manual-Remote-Push
25 - 500
25 - 2000
AIR
3
Stall + Speed Shift
None (Stall)
Manual-Remote-Push
25 - 1350
25 - 2000
AIR
3
Stall + Double Speed-Shift
None (Stall)
Manual-Remote-Push
325 - 1350
325 - 2000
AIR
2
PAC 2
Pressure Activated
Manual-Remote-Push
10 - 240
10 - 150
AIR
2
PAC 2 + Speed Shift
Pressure Activated
Manual-Remote-Push
25 - 500
25 - 500
AIR
3
PAC 3
Pressure Activated
Manual-Remote-Push
25 - 500
25 - 2000
AIR
3
PAC 3 + Speed Shift
Pressure Activated
Manual-Remote-Push
25 - 1350
25 - 2000
AIR
3
PAC 3 + Dbl Speed Shift
Pressure Activated
Manual-Remote-Push
325 - 1350
325 - 2000
AIR
2
Accu-Brake
Clutch
Manual-Remote-Push
10 - 240
10 - 150
AIR
3
Accu-Brake
Clutch
Manual-Remote-Push
25 - 500
25 - 2000
AIR
2
Accu-Trol
Computer
Manual-Remote-Push
10 - 240
10 - 150
AIR
2
Accu-Trol + Speed Shift
Computer
Manual-Remote-Push
25 - 500
25 - 500
AIR
3
Accu-Trol
Computer
Manual-Remote-Push
25 - 500
25 - 2000
AIR
3
Accu-Trol + Speed Shift
Computer
Manual-Remote-Push
25 - 1350
25 - 2000
AIR
3
Accu-Trol + Dbl Spd Shift
Computer
Manual-Remote-Push
325 - 1350
325 - 2000
Enquire about sockets for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
F-4
Specifications subject to change without notice. E&OE. ©
PNEUMATIC NUTRUNNERS
PN
ARS2A-M010
5
3/8” ANGLE NUTRUNNER
PNEUMATIC NUTRUNNERS
STALL TYPE / REVERSIBLE
SQUARE DRIVE
BOLT CAPACITY
MOTOR POWER
MAX. TORQUE
SPEED
AIR CONS.
AIR INLET SIZE
NET WEIGHT
LENGTH
3/8"
10mm
470W 0.63HP
10Nm 7.4ft lb
1575rpm
634L/min 22.4cfm
¼”NPT
1.5kg
333mm
Tool runs until torque load brings it to a stop (stall)
at which time the operator releases the throttle.
ARS2A-M060
½” ANGLE NUTRUNNER
STALL TYPE / REVERSIBLE
SQUARE DRIVE
BOLT CAPACITY
MOTOR POWER
MAX. TORQUE
SPEED
AIR CONS.
AIR INLET SIZE
NET WEIGHT
LENGTH
1/2"
15mm
470W 0.63HP
64Nm 47.2ft lb
240rpm
634L/min 22.4cfm
¼”NPT
1.7kg
356mm
AAT - NUTRUNNERS
Tool runs until torque load brings it to a stop (stall)
at which time the operator releases the throttle.
ARS2A-M180
¾” ANGLE NUTRUNNER
STALL TYPE / REVERSIBLE
SQUARE DRIVE
BOLT CAPACITY
MOTOR POWER
MAX. TORQUE
SPEED
AIR CONS.
AIR INLET SIZE
NET WEIGHT
LENGTH
3/4"
20mm
470W 0.63HP
180Nm 133ft lb
85rpm
634L/min 22.4cfm
¼”NPT
3.0kg
432mm
Tool runs until torque load brings it to a stop (stall)
at which time the operator releases the throttle.
Enquire about sockets for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
F-5
PNEUMATIC NUTRUNNERS
ARS3A-M240
6
STALL TYPE WITH SPEED SHIFT
¾” ANGLE NUTRUNNER
STALL TYPE / REVERSIBLE
SQUARE DRIVE
BOLT CAPACITY
MOTOR POWER
MAX. TORQUE
SPEED
AIR CONS.
AIR INLET SIZE
NET WEIGHT
LENGTH
3/4"
20mm
850W 1.15HP
240Nm 177ft lb
110rpm
934L/min 33cfm
¼”NPT
3.8kg
498mm
Same as previous models but with larger motor for
greater torque.
ARS2DA-M185
¾” ANGLE NUTRUNNER
STALL TYPE / SPEEDSHIFT REVERSIBLE
SQUARE DRIVE
BOLT CAPACITY
MOTOR POWER
MAX. TORQUE
SHIF T TORQUE
SPEED
AIR CONS.
AIR INLET SIZE
AAT - NUTRUNNERS
NET WEIGHT
LENGTH
3/4"
20mm
470W 0.63HP
185Nm 136ft lb
15Nm 11ft lb
625rpm
634L/min 22.4cfm
¼”NPT
3.1kg
475mm
Fitted with Speedshift gearbox for faster rundown
and shorter cycle times.
ARSD3A-M240
¾” ANGLE NUTRUNNER
STALL TYPE / SPEEDSHIFT REVERSIBLE
SQUARE DRIVE
BOLT CAPACITY
MOTOR POWER
MAX. TORQUE
SHIF T TORQUE
SPEED
AIR CONS.
AIR INLET SIZE
NET WEIGHT
LENGTH
3/4"
20mm
850W 1.15HP
240Nm 177 ft lb
33Nm 24ft lb
535rpm
934L/min 33cfm
¼”NPT
4.0kg
544mm
Fitted with Speedshift gearbox for faster
run-down and shorter cycle times.
Enquire about sockets for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
F-6
Specifications subject to change without notice. E&OE. ©
PNEUMATIC
NE
NUTRUNNERS
ARSDD3A-M1350
7
1” FLAT HEAD NUTRUNNER
SQUARE DRIVE
BOLT CAPACITY
MOTOR POWER
MAX. TORQUE
SHIF T TORQUE
SPEED
AIR CONS.
AIR INLET SIZE
NET WEIGHT
LENGTH
1"
25mm
850W 1.15HP
1350Nm 1000ft lb
74Nm 55ft lb
225rpm
934L/min 33cfm
¼”NPT
15.2kg
760mm
Fitted with Double Speedshift gearbox for much
faster run-down and shorter cycle times.
APPLICATIONS
APPLICATIONS
ACCESSORIES
Accessories for A.A.T. Nutrunners include:
• Reaction Brackets - Up to 60Nm
- Over 60Nm
• Reaction Bars
- Over 60Nm
- Over 240Nm
• Swivel Bail
• 80Nm Offset
- For Angle Head Tools
AAT - NUTRUNNERS
Custom engineered tools for difficult applications.
STALL TYPE WITH DOUBLE SPEED SHIFT
STALL TYPE / DOUBLE SPEED SHIFT / REVERSIBLE
Enquire about sockets for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
F-7
AAT - NUTRUNNERS
8
F-8
Specifications subject to change without notice. E&OE. ©
SECTION G
NIBBLERS
SHEARS
SAWS
KETT
CUTTING TOOLS
•
The Kett range of Air Tools focuses on the nibbling and
shearing of various materials in sheet and mesh from up to
4.7mm thick mild steel and 3.4mm thick stainless steel.
•
Manufactured in the U.S.A. Kett tools feature robust, heavy
duty construction and can be expected to give long service
in demanding industrial situations.
•
All Kett models sold in Australia have full spare parts and
service back-up.
CONTENTS - KETT
TOOLS
Nibbler
1.2mm Mild Steel
3
Nibbler
2.1mm Mild Steel
3
Nibbler
4.7mm Mild Steel
4
Shear
Double Cut Heavy Duty
4
Shear
Scissor Heavy Duty
4
Shears
Scissor Std. Duty
5
Shears
Fibre Cement
5
Saws
Metal Panel
6
Saws
Timber Panel
7
KETT
KETT CONTENTS
2
PAGE
G-2
Specifications subject to change without notice. E&OE. ©
NIBBLERS
PN-1000
3
NIBBLERS
LIGHT GAUGE PORTABLE AIR NIBBLER
CUTTING CAPACITIES
MILD STEEL
STAINLESS STEEL
ALUMINIUM
BRASS / COPPER
PLASTIC
POWER
FREE SPEED
MAX. CUTTING SPEED
MIN. CUT RADIUS
AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
1.20mm
0.90mm
1.57mm
1.57mm
2.40mm
380W
2500spm
1015mm/min
16mm
113L/min 4cfm
¼”NPT
1.13kg
45mm
Lightweight, compact, nibbler with the ability to cut
intricate curves in flat or corrugated steel, aluminium,
copper and plastic. It’s small size makes it useful
in auto body repair shops, automotive accessory
installation and detailed sheetmetal work. Especially
useful where corrugated sheeting is involved.
197mm
137mm
AN-2000
PORTABLE AIR NIBBLER
CUTTING CAPACITIES
MILD STEEL
STAINLESS STEEL
NON-FERROUS
POWER
FREE SPEED
MAX. CUTTING SPEED
MIN. CUT RADIUS
AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
WIDTH OF CUT
STARTING HOLE SIZE
2.1mm
1.63mm
2.1mm
746W
1200spm
1500mm/min
26mm
825L/min 29cfm
¼”NPT
3.17kg
76mm
6.35mm
31.75mm
165mm
KETT
Faster, heavier duty nibbler than the PN-1000.
Makes quick work of nibbling flat sheets of mild
steel, stainless steel, aluminium, brass, copper.
Typical applications are: Sheet Metal Fabrication,
Light Manufacturing, HVAC Installation, General
Contracting, Metal Roofing; Ornamental &
Architectural Metalwork.
250mm
For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
G-3
NIBBLERS
AN-6000
4
NIBBLERS / SHEARS
PORTABLE AIR NIBBLER
CUTTING CAPACITIES
MILD STEEL
STAINLESS STEEL
NON-FERROUS
POWER
FREE SPEED
MAX. CUTTING SPEED
MIN. CUT RADIUS
AIR CONS
AIR INLET SIZE
NET WEIGHT
WIDTH
WIDTH OF CUT
STARTING HOLE SIZE
4.76mm
3.42mm
6.35mm
1500W
1200spm
900mm/min
205mm
850L/min 30cfm
½”NPT
9.5kg
127mm
4.77mm
64mm dia.
320mm
305mm
Provides heavy duty cold cutting performance with portability.
Typical applications include: Fuel Tank Removal, Marine Repair
& Maintenance, Architectural Metalwork, General Fabrication,
Machinery Manufacture, Metal Tanks and Containers.
SHEARS
P-540
P-541
HEAVY DUTY DOUBLE CUT SHEAR
267mm
HEAVY DUTY SCISSOR SHEAR
279mm
CUTTING CAPACITIES
CUTTING CAPACITIES
MILD STEEL
ALUMINIUM
STAINLESS STEEL
BR ASS / COPPER
KETT
PL ASTIC
FREE SPEED
CUT TING SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
2.10mm
1.88mm
1.65mm
1.88mm
2.40mm
1800spm
4.5m/min
114L/min 4cfm
¼”NPT
1.8kg
Heavy duty steel shear head. Takes over where
standard double cut shears leave off.
MILD STEEL
ALUMINIUM
BR ASS / COPPER
PL ASTIC
FREE SPEED
CUT TING SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
0.60mm
1.57mm
1.19mm
3.2mm
1800spm
4.5m/min
114L/min 4cfm
¼”NPT
2.3kg
Heavy duty steel shear head. Quickly cuts through plastics, wire mesh
& rubber with a clean scissor action. Cuts thin coated metals with a
swiping action which tends to seal the edges and minimise corrosion
For Air Tool Oil see page L-25
G-4
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
SHEARS
P-570
P-580
5
SHEARS
318mm
318mm
SCISSOR SHEAR
SCISSOR SHEAR
STATIONARY TOP BLADE
STATIONARY BOTTOM BLADE
CUTTING CAPACITIES
FREE SPEED
CUT TING SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
Variable, depending on the
construction of the particular
pliable material to be cut.
Trialling is recommended.
1800rpm
Varies with material
114L/min 4cfm
¼”NPT
1.36kg
CUTTING CAPACITIES
Variable depending on
the construction of the
material to be cut. Trialling is
recommended.
FREE SPEED
1800spm
114L/min 4cfm
¼”NPT
1.36kg
AIR CONS
AIR INLET SIZE
NET WEIGHT
Features a stationary top blade. Ideal for cutting a wide range of pliable
materials such as carpet, carpet underlay, foam rubber, linoleum, vinyl,
woven wood fabric, chipboard, etc. The unique scissor action cuts light
materials without fouling or gouging. Handles heavy foil, light insulated wire,
hardware cloth and mesh screening with ease. The large “Rabbit Ear” blades
funnel thick, soft materials into the jaws for a clean flowing cut.
P-592
Same uses as P570 but has stationary bottom blade for
faster cutting of lighter materials supported by a table.
P-593
292mm
STANDARD DOUBLE CUT
FIBRE CEMENT SHEAR
FREE SPEED
CUT TING SPEED
AIR CONS
AIR INLET SIZE
Aluminium head gives capacity to cut 13mm thick
standard fibre cement sheet.
FREE SPEED
CUT TING SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
1800spm
Varies with material
114L/min 4cfm
¼”NPT
1.82kg
This model is fitted with a rugged steel shear head to allow fast
cutting of backer board or fibre cement sheet with no airborne
dust and minimal clean-up. It is also fitted with A-2 tool steel
blades which cut cleaner for longer.
KETT
NET WEIGHT
1800spm
Varies with material
114L/min 4cfm
¼”NPT
1.59kg
254mm
HEAVY DUTY DOUBLE CUT
FIBRE CEMENT SHEAR
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
G-5
SAWS
PS-523
PS-521
SAWS
6
330mm
356mm
PANEL CUTTING SAW
MAX. DEPTH OF CUT
FREE SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
6mm
2200rpm
114L/Min 4cfm
¼”NPT
2.27kg
Cuts plastic and rigid materials up to 6mm thick; aluminium up to
3mm thick; cold rolled mild steel to 1.2mm. Uses either 32mm dia.
or 38mm dia. high speed steel blades. Is ideal for cutting sheet metal
gutters, aluminium siding, auto body panels and signs. The blade
leaves a milled, ready to fabricate finish without burring the metal.
PS-526
VARIABLE SPEED SAW
MAX. DEPTH OF CUT
FREE SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
Variable speed trigger and large blade enables smooth, easy starting
cuts in mild steel up to 1.6mm. Using 50mm or 63mm high speed steel
blades this highly manoeuvrable saw cuts through 16mm thick timber
or composite panels without chipping or burring the edges.
PSV-532
343mm
357mm
PANEL SAW WITH DEPTH GAUGE
MAX. DEPTH OF CUT
FREE SPEED
KETT
AIR CONS
G-6
AIR INLET SIZE
NET WEIGHT
16mm
2200rpm
114L/Min 4cfm
¼”NPT
2.73kg
10mm
2200rpm
114L/Min 4cfm
¼”NPT
2.27kg
Equipped with a precision screw-type depth adjustment, making it easy
to maintain an exact depth of cut. Uses 38mm & 50mm high speed
steel blades. Cuts mild steel up to 1.6mm, aluminium to 3mm, plastics
to full cutting depth of 6mm for 32mm blade and 10mm for 50mm
blade. Light in weight and portable, the PS-526 is ideal for auto body
shops, model & design departments and sheet metal shops.
PANEL SAW WITH VACUUM HEAD
MAX. DEPTH OF CUT
FREE SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
16mm
2200rpm
114L/Min 4cfm
¼”NPT
2.73kg
A lightweight, efficient saw for cutting dust-producing materials. The
vacuum head accepts many standard cuffs from portable or in-plant
vacuum systems. Comes equipped with a 63mm carbide abrasive blade
but also accepts 50mm & 63mm high-speed steel blades for cutting
sheet metal or metal laminated panels.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
SAWS
PSV-534
P-544
7
SAWS
357mm
PANEL SAW WITH VACUUM HEAD
MAX. DEPTH OF CUT
FREE SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
27mm
2200rpm
114L/Min 4cfm
¼”NPT
2.73kg
Lightweight compact saw for cutting hardboard, plywood, dry-wall,
backerboard, fibreglass and dust producing panels. Makes plunge
cuts or straight cuts up to 27mm deep. Cutting zone is protected by a
spring-loaded blade guard. Uses Kett 89mm saw blades or 63mm dia.
high-speed steel blades for cutting up to 1.6mm cold rolled mild steel or
metal laminated panels. Vacuum head accepts cuffs from most portable
and in-plant vacuum systems.
357mm
TIMBER PANEL SAW
MAX. DEPTH OF CUT
FREE SPEED
AIR CONS
AIR INLET SIZE
NET WEIGHT
27mm
2200rpm
114L/Min 4cfm
¼”NPT
2.27kg
Cuts drywall, plywood, laminate hardboard and other soft or rigid
materials up to 27mm thick. Features a cast aluminium saw head with
Kett 89mm dia. hardened high-speed steel blade with a spring loaded
retractable blade guard. This controlled depth-of-cut also makes it
suitable for cutting signs, PVC, acrylic plastics and cold rolled mild
steel up to 1.6mm thick. Compact size allows work in confined spaces
with less hand or arm fatigue.
KETT
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
G-7
KETT
8
G-8
Specifications subject to change without notice. E&OE. ©
SECTION H
HOLE CUTTING
MACHINES
HOLE CUTTERS ANULAR
TIN COATED CUTTERS
RAIL CUTTERS
VACUUM PAD
HOLE CUTTERS ANULAR
TWIST DRILLS &
CONTERSINKS
ACCESSORIES
ROTABROACH
HOLE CUTTING
SYSTEMS
•
Based in Sheffield U.K. Rotabroach offers Electric,
Pneumatic & Hydraulic hole cutting machines with
magnetic bases.
•
As a result of continuing research, development and
innovation, Rotabroach has become one of the leading
brands in the annular hole cutting industry.
•
Other products in the Rotabroach range are Anular
Cutters, Drilling Accessories, Magnetic Drill Accessories,
Rail Drilling Machines, Rail Anular Cutters, Rail Drilling
Accessories and Cutting Fluid.
•
Rotabroach equipment is backed up in Australia by a
network of service agents with spare parts back-up.
1
CONTENTS - ROTABROACH
TOOLS
CONTENTS
2
PAGE
Hole Cutting Machine
Magnetic Base - 30mm
3
Hole Cutting Machine
Magnetic Base - 35mm
3
Hole Cutting Machine
Magnetic Base - 40mm
3
Hole Cutting Machine
Magnetic Base - 50mm
4
Hole Cutting Machine
Magnetic Base - 65mm
4
Hole Cutting Machine
Magnetic Base - 100mm
4
Hole Cutting Machine
Magnetic Base - 35mm
5
Hole Cutting Machine
Magnetic Base - 52mm
Spark Resistant
Magnetic Base - 52mm
Hydraulic
Rail - 36mm
5
Hole Cutting Machine
Hole Cutting Machine
6
Hole Cutters
Anular
7
Anular Cutters
Kit
10
Rail Cutters
10
Vacuum Pad
10
Hole Cutters
Mini Cutters
11
Twist Drills
M2 & M4
12
Countersinks
90º HSS
12
Countersinks
90º Piloted HSS
12
Countersinks
90º Piloted TCT
12
Accessories
Cutting Machine
13
Lubricants
Paste & Oil
14
Swarf Stick
14
Pipe Adaptor Kit
14
ROTABROACH
H-2
5
Specifications subject to change without notice. E&OE. ©
HOLE CUTTING MACHINES - MAGNETIC
SMART PUMA 3
3
FEATURES:
• Cutsmart Technology
• Drill Chuck Quick Release
• New Improved Gearbox
• Ergonomic Carry Handle
• Light Weight – only 11kg
• Carry Case & Accessories included
MOTOR
HOLE CUTTING MACHINES - MAGNETIC
PUMA - 30MM ELECTRIC VERTICAL
HOLE CUTTER WITH MAGNETIC BASE
230 Volt 800 Watt 4 Amp
600rpm
30mm dia. x 50mm deep
19.05mm (3/4”)
750kg
420mm
170mm
250mm
11kg
NO LOAD SPEED
MAX. HOLE CAPACITY
SPINDLE BORE
MAGNETIC HOLD
HEIGHT
WIDTH
LENGTH
WEIGHT
CM/8003A
LYNX - 35MM SEMI AUTOMATIC
ELECTRIC VERTICAL HOLE CUTTER
FEATURES:
• Semi Automatic Operation
• Automatic or Manual Control
• Variable Speed
• Automatic Coolant
• Includes 13mm Drill Chuck
• Electronic Overload Protection
MOTOR
NO LOAD SPEED
230 Volt 1100 Watt 5.4 Amp
620rpm
MAX. HOLE CAPACITY
MANUAL
AUTOMATIC
T WIST DRILL
SPINDLE BORE
MAGNETIC HOLD
HEIGHT
WIDTH
LENGTH
WEIGHT
35mm dia. x 50mm deep
35mm dia. x 45mm deep
13mm dia. x 110mm deep
19.05mm (3/4”)
1500kg
417mm
230mm
270mm
16.5kg
ROTABROACH
SMART PANTHER 3
PANTHER - 40MM ELECTRIC VERTICAL
HOLE CUTTER WITH MAGNETIC BASE
FEATURES:
• Cutsmart Technology
• Drill Chuck Quick Release
• Heavy Duty Gearbox
• Ergonomic Carry Handle
• Variable Speed Motor
• Automatic Coolant
• Clutch and Electronic Safety Overload
• Light Weight – only 14.6kg
• Carry Case and Accessories included
MOTOR
NO LOAD SPEED
MAX. HOLE CAPACITY
SPINDLE BORE
MAGNETIC HOLD
HEIGHT
WIDTH
LENGTH
WEIGHT
230 Volt 1100 Watt 5 Amp
350 – 600rpm
40mm dia. x 50mm deep
19.05mm (3/4”)
750kg
510mm
180mm excluding bottle
265mm
14.6kg
For Cutters see pages from H-7
Specifications subject to change without notice. E&OE. ©
H-3
HOLE CUTTING MACHINES - MAGNETIC
CM/405/3A
HOLE CUTTING MACHINES - MAGNETIC
4
FALCON - 50MM REVERSIBLE ELECTRIC
VERTICAL HOLE CUTTER FOR TAPPING
FEATURES
MOTOR
•
•
•
•
NO LOAD SPEED
•
•
•
•
Reversible Arbor for Tapping
Safety Relay Circuit
Variable Speed Control
Includes M10, M12, M14 & M16 Tap
Holders (DIN 376)
Includes 13mm Drill Chuck
Includes Safety Glasses & Ear Plugs
2MT Arbor
Automatic Coolant
MAX. HOLE CAPACITY
ANULAR CUTTERS
TWIST DRILLS
TAPS
COUNTERSINKS
SPINDLE BORE
MAGNETIC HOLD
HEIGHT
WIDTH
LENGTH
WEIGHT
COBRA - 65MM ELECTRIC VERTICAL
HOLE CUTTER WITH MAGNETIC BASE
FEATURES
MOTOR
•
•
•
•
•
NO LOAD SPEED
Ergonomic Carry Handle
Variable Speed Control
Clutch & Electronic Safety Overload
Light Weight – only 19.8kg
Carry Case and Accessories included
MAX. HOLE CAPACITY
SPINDLE BORE
MAGNETIC HOLD
WIDTH
LENGTH
NET WEIGHT
ROTABROACH
12 – 50mm dia. x 50mm deep
1 – 23mm dia.
M3 – M20
10 – 40mm dia.
19.05mm (3/4”) 2MT
1850kg
420mm
170mm
250mm
13kg
CM/200/3A
HEIGHT
230 Volt 1400 Watt 6 Amp
160 – 640rpm
65mm dia. x 50mm deep
19.05mm (3/4”)
1200kg
570mm
190mm excluding bottle
300mm
19.8kg
CM/500/3A
SCORPION - 100MM ELECTRIC VERTICAL
HOLE CUTTER WITH MAGNETIC BASE
FEATURES
MOTOR
• Variable Speed Control
• Tapping up to M30
• Hole Cutting to
100mm dia x 100mm deep
• 3MT Arbor
• Automatic Coolant
• Chuck attachment available
• Drill taps available
• Clutch and Electroic
Safety Overload
• Carry Case and Accessories included
NO LOAD SPEED
For Cutters see pages from H-7
H-4
230 Volt 1150 Watt 5.75 Amp
(1) 250rpm (2) 450rpm
Specifications subject to change without notice. E&OE. ©
MAX. HOLE CAPACITY
SPINDLE BORE
MAGNETIC HOLD
HEIGHT
WIDTH
LENGTH
NET WEIGHT
230 Volt 1800 Watt 9 Amp
40 – 600rpm
100mm dia. x 100mm deep
3MT
3000kg
708mm
190mm excluding bottle
340mm
26kg
HOLE CUTTING MACHINES - MAGNETIC
CM/705/3A
5
FEATURES
MOTOR
•
•
•
•
•
•
NO LOAD SPEED
Only 210mm high
Quick Release Arbor
Quick Release Capstan Arm
Electronic Overload
Light Weight – only 10kg
Carry Case and Accessories included
MAX. HOLE CAPACITY
SPINDLE BORE
MAGNETIC HOLD
HEIGHT
WIDTH
LENGTH
NET WEIGHT
HOLE CUTTING MACHINES - MAGNETIC
ADDER - 35MM ELECTRIC RIGHT-ANGLE
HOLE CUTTER WITH MAGNETIC BASE
230 Volt 1100 Watt 5.4 Amp
650rpm
35mm dia. x 25mm deep
19.05mm (3/4”)
1500kg
210mm
100mm
285mm
10kg
RD130C
EAGLE – 52MM PNEUMATIC VERTICAL HOLE CUTTER WITH
MAGNETIC BASE AND SPARK RESISTENT BODY
FEATURES
AIR SUPPLY
• Atlas Copco Motor combining Safety
and Reliability
• Mechanically Activated Permanent Magnet
• High Zinc Alloy Body for Spark Resistance
• Anti Corrosive Moving Components
• Stainless Steel Spindle and Guard for
Corrosion Resistence
• Drill Chuck Attachment
• Designed for use in petro-chemical plants,
offshore oil platforms and other corrosive and
hazardous environments
NO LOAD SPEED
MAX. HOLE CAPACITY
SPINDLE BORE
MAGNETIC HOLD
HEIGHT
WIDTH
LENGTH
NET WEIGHT
6.3bar 91psi 780L/min 28cfm
160rpm
52mm dia. x 50mm deep
19.05mm (3/4”)
700kg
540mm
175mm
370mm
20.6kg
ATEX approved to 11 2G T4 11 D110ºC
ROTABROACH
RD140
GATOR - 52MM HYDRAULIC VERTICAL
HOLE CUTTER WITH MAGNETIC BASE
FEATURES
•
•
•
•
•
•
Stainless Steel Construction
Mechanically Activated Permanent Magnet
Complete with Drill Chuck Attachment
Powerful and Secure Magnetic Hold
Optional Underwater Version
3MT version available
HYDRAULIC SUPPLY
NO LOAD SPEED
MAX. HOLE CAPACITY
SPINDLE BORE
MAGNETIC HOLD
HEIGHT
WIDTH
LENGTH
NET WEIGHT
140 bar 2050psi
630rpm
52mm dia. x 50mm deep
19.05mm (3/4”)
700kg
530mm max.
180mm over handles
315mm over magnet lever
24.0kg
For Cutters see pages from H-7
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
H-5
HOLE CUTTING MACHINE - RAIL
RD074
DRILLING MACHINE - RAIL
6
RHINO 4
36MM CAPACITY 4 STROKE
PETROL RAIL DRILL
ROTABROACH
FEATURES
•
•
•
•
•
•
•
•
•
4 stroke Honda engine with Australia wide service availability
Light weight – only 18.5kg
Highly portable for remote locations
Low noise level – Low emissions
Robust and Reliable
Integrated Automatic Throttle Control
LUL and Network Rail approved
High speed version available for solid cutters
Complete with lightweight carrying case and coolant pump
ENGINE
NO LOAD SPEED
MAX. HOLE CAPACITY
SPINDLE BORE
HEIGHT
WIDTH
LENGTH
THROT TLE ACTIVATION
SAFET Y FE ATURES
Honda 4 stroke – 51cc
300rpm
36mm dia.
19.05mm (3/4”)
420mm
420mm excluding bottle
540mm
Automatic feed
Clutch fitted
Also available with Stihl 2 stroke petrol engine - order RD07A
Enquire about Hydraulic and Pneumatic powered Rail Drills. For Cutters see page H-10
H-6
Specifications subject to change without notice. E&OE. ©
HOLE CUTTERS - ANULAR
FULLY GROUND M2 HIGH SPEED STEEL CUTTERS
7
STANDARD SERIES – 25MM CUTTING DEPTH
LONG SERIES – 50MM CUTTING DEPTH
Part No.
Dia. mm
Part No.
Dia. mm
Part No.
Dia. mm
Part No.
APT021125
11
APT023225
32
APT021250
12
APT023950
39
APT021225
12
APT023325
33
APT021350
13
APT024050
40
APT021325
13
APT023425
34
APT021450
14
APT024150
41
APT021425
14
APT023525
35
APT021550
15
APT024250
42
APT021525
15
APT023625
36
APT021650
16
APT024350
43
APT021625
16
APT023725
37
APT021750
17
APT024450
44
APT021725
17
APT023825
38
APT021850
18
APT024550
45
APT021825
18
APT023925
39
APT021950
19
APT024650
46
APT021925
19
APT024025
40
APT022050
20
APT024750
47
Dia. mm
APT022025
20
APT024125
41
APT022150
21
APT024850
48
APT022125
21
APT024225
42
APT022250
22
APT024950
49
APT022225
22
APT024325
43
APT022350
23
APT025050
50
APT022325
23
APT024425
44
APT022450
24
APT025150
51
APT022425
24
APT024525
45
APT022550
25
APT025250
52
APT022525
25
APT024625
46
APT022650
26
APT025350
53
APT022625
26
APT024725
47
APT022750
27
APT025450
54
APT022725
27
APT024825
48
APT022850
28
APT025550
55
56
APT022825
28
APT024925
49
APT022950
29
APT025650
APT022925
29
APT025025¾”
50
APT023050
30
APT025750
57
APT023025
30
APT025125
51
APT023150
31
APT025850
58
APT023125
31
APT025225
52
PILOT PINS
APT023250
32
APT025950
59
APT023350
33
APT026050
60
APT023450
34
APT026150
61
APT023560
35
APT026250
62
APT023650
36
APT026350
63
APT023750
37
APT026450
64
APT023850
38
APT026550
65
PILOT PINS
Range
Part No.
Range
APTSRA3057
11-12mm
APTRA3013
12mm
APTSRA25
13-52mm
APTSRA50
13-52mm
Long Series M2 Cutter
30mm Cutting Depth
Specifications subject to change without notice. E&OE. ©
ROTABROACH
Part No.
Standard Series M2 Cutter
22mm Cutting Depth
HOLE CUTTERS - ANULAR
FULLY GROUND M2 HIGH SPEED STEEL CUTTERS FOR GENERAL ENGINEERING, CONSTRUCTION & FABRICATION
WITH MATERIAL HARDNESS < 700N/SQ MM
H-7
HOLE CUTTERS - ANULAR
FULLY GROUND M42 HIGH SPEED STEEL CUTTERS
HOLE CUTTERS - ANULAR
8
FOR GENERAL ENGINEERING, CONSTRUCTION, FABRICATION,
RAILWAY & AEROSPACE WITH MATERIAL HARDNESS < 850N/SQ MM
STANDARD SERIES – 25MM CUTTING DEPTH
LONG SERIES – 50MM CUTTING DEPTH
Part No.
Dia. mm
Part No.
Dia. mm
Part No.
Dia. mm
Part No.
Dia. mm
APT421325
13
APT422725
27
APT421350
13
APT422750
27
APT421425
14
APT422825
28
APT421450
14
APT422850
28
APT421525
15
APT422925
29
APT421550
15
APT422950
29
APT421625
16
APT423025
30
APT421650
16
APT423050
30
APT421725
17
APT423125
31
APT421750
17
APT423150
31
APT421825
18
APT423225
32
APT421850
18
APT423250
32
APT421925
19
APT423325
33
APT421950
19
APT423350
33
APT422025
20
APT423425
34
APT422050
20
APT423450
34
APT422125
21
APT423525
35
APT422150
21
APT423550
35
APT422225
22
APT423625
36
APT422250
22
APT423650
36
APT422325
23
APT423725
37
APT422350
23
APT423750
37
APT422425
24
APT423825
38
APT422450
24
APT423850
38
APT422525
25
APT423925
39
APT422550
25
APT423950
39
APT422625
26
APT424025
40
APT422650
26
APT424050
40
ROTABROACH
PILOT PIN
H-8
PILOT PIN
Part No.
Range
Part No.
Range
APTSRA25
13-40mm
APTSRA50
13-36mm
Standard Series M42 Cutter
30mm Cutting Depth
Specifications subject to change without notice. E&OE. ©
Long Series M42 Cutter
30mm Cutting Depth
HOLE CUTTERS - ANULAR
TUNGSTEN CARBIDE TIPPED CUTTERS
9
STANDARD SERIES – 35MM CUTTING DEPTH
LONG SERIES – 110MM CUTTING DEPTH
Part No.
Dia. mm
Part No.
Dia. mm
Part No.
Dia. mm
Part No.
Dia. mm
APTCT1435
14
APTCT3435
34
APTCT14110
14
APTCT40110
40
APTCT1535
15
APTCT3535
35
APTCT15110
15
APTCT41110
41
APTCT1635
16
APTCT3635
36
APTCT16110
16
APTCT42110
42
APTCT1735
17
APTCT3735
37
APTCT17110
17
APTCT43110
43
APTCT1835
18
APTCT3835
38
APTCT18110
18
APTCT44110
44
APTCT1935
19
APTCT3935
39
APTCT19110
19
APTCT45110
45
APTCT2035
20
APTCT4035
40
APTCT20110
20
APTCT46110
46
APTCT2135
21
APTCT4135
41
APTCT21110
21
APTCT47110
47
APTCT2235
22
APTCT4235
42
APTCT22110
22
APTCT48110
48
APTCT2335
23
APTCT4335
43
APTCT23110
23
APTCT49110
49
APTCT2435
24
APTCT4435
44
APTCT24110
24
APTCT50110
50
APTCT2535
25
APTCT4535
45
APTCT25110
25
APTCT51110
51
APTCT2635
26
APTCT4635
46
APTCT26110
26
APTCT52110
52
APTCT2735
27
APTCT4735
47
APTCT27110
27
APTCT53110
53
APTCT2835
28
APTCT4835
48
APTCT28110
28
APTCT54110
54
APTCT2935
29
APTCT4935
49
APTCT29110
29
APTCT55110
55
APTCT3035
30
APTCT5035
50
APTCT30110
30
APTCT56110
56
APTCT3135
31
APTCT5135
51
APTCT31110
31
APTCT57110
57
APTCT3235
32
APTCT5235
52
APTCT32110
32
APTCT58110
58
APTCT3335
33
APTCT33110
33
APTCT59110
59
APTCT34110
34
APTCT60110
60
APTCT35110
35
APTCT61110
61
APTCT36110
36
APTCT62110
62
APTCT37110
37
APTCT63110
63
APTCT38110
38
APTCT64110
64
APTCT39110
39
APTCT65110
65
PILOT PINS
Part No.
Range
Part No.
Range
APTSRA90
14-17mm
APTRA3092
18-65mm
APTRA089
18-52mm
Standard Series TCT Cutter
22mm Cutting Depth
110mm Cutting Depth
ROTABROACH
PILOT PINS
HOLE CUTTERS - ANULAR
FOR GENERAL ENGINEERING, CONSTRUCTION, FABRICATION
& AEROSPACE WITH MATERIAL HARDNESS > 850N/SQ MM
TCT Cutters with Cutting Depths of 50mm and 75mm also available.
Specifications subject to change without notice. E&OE. ©
H-9
ANULAR CUTTERS
RAPK2000
RAIL CUTTERS / TIN COATED CUTTERS
10
ANULAR CUTTER KIT
Contains 5 conveniently sized cutters – 14, 16, 18, 20 and 22mm diameter cutters,
25mm deep with 2 pilot pins.
RAIL CUTTERS
RAIL SERIES CUTTERS
TCT CUTTERS DESIGNED FOR THE TOUGHEST OF RAIL
RAIL SERIES CUTTING DEPTH – 25MM
Part No.
Dia. mm
Part No.
Dia. mm
APTRS1825
18
APTRS2825
28
APTRS1925
19
APTRS2925
29
APTRS2025
20
APTRS3025
30
APTRS2125
21
APTRS3125
31
APTRS2225
22
APTRS3225
32
APTRS2325
23
APTRS3325
33
APTRS2425
24
APTRS3425
34
APTRS2525
25
APTRS3525
35
APTRS2625
26
APTRS3625
36
APTRS2725
27
ROTABROACH
PILOT PIN
H-10
Part No.
Range
APTSRA25
18-60mm
Rail Series Cutter
VACUUM PAD
VACUUM PAD
The Vacuum pad is the ideal accessory for use when drilling any
non-ferrous material. Simply attach your Rotabroach magnetic drill
to the steel plate provifed and drill away.
The vacuum pad has a powerful holding power, 368kgs at centre
position (no vacuum pump required).
Air supply required approx 4 cubic feet per minute and a minimum
pressure of 70psi.
Part Number: DB121
Specifications subject to change without notice. E&OE. ©
HOLE CUTTERS - ANULAR
MINI CUTTERS
11
For perfect holes in sheet metal, pipes and plastic.
HOLE CUTTERS - ANULAR
Cut clean, burr-free holes in seconds with new Rotabroach
Mini-Cutters, the professional solution to holemaking in sheet
metal, pipes and plastics.
Mini-cutters produce holes by removing a ‘disc’ of metal
and have precision ground teeth and flutes to rapidly remove
waste material, so they are fast, smooth and highly accurate.
Now they come with a new and more aggressive tooth
geometry to give higher performance and longer cutting life
on stainless steel and other difficult materials. No toolbox
is complete without Mini-cutters for clean, precise and
effortless holecutting every time.
Over 3 times faster than twist drills.
MINI-CUTTER KITS
S
METRIC MINI-CUTTERS
•
Mini-Cutter Kits
Mini-Cutter kits are supplied in a handy plastic case complete with
arbor, pilot and hexagon key.
•
Imperial Kit
Comes with 7 cutters in 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”, ¾”
diameter sizes and arbor for ½” drill chuck.
•
Imperial Kit
As above but with arbor for 3/8” drill chuck.
•
Metric Kit
Comes with 7 cutters in 8mm, 10mm, 12mm, 14mm, 16mm, 18mm and
20mm diameter sizes and arbor for ½” drill chuck.
•
Metric Kit
As above but with arbor for 3/8” drill chuck.
•
Arbor
For use with Mini-Cutters from 21mm + diameter in ½” drill chucks.
For Holes In Materials Up To 8mm Thick. Arbors Fit 3/8” And
½” Drill Chucks
Part No.
Ømm
Part No.
Ømm
APTM101060
6mm
APTM101140*
14mm
APTM101080*
8mm
APTM101150
15mm
APTM101090
9mm
APTM101160*
16mm
APTM101100*
10mm
APTM101170
17mm
APTM101110
11mm
APTM101180*
18mm
APTM101120*
12mm
APTM101190
19mm
APTM101130
13mm
APTM101200*
20mm
For Holes In Materials Up To 12mm Thick. Arbors Fit ½” Drill
Chucks.
Part No.
Ømm
Part No.
Ømm
APTM12210
21mm
APTM12240
24mm
APTM12220
22mm
APTM12250
25mm
APTM12230
23mm
*Kit sizes
For Holes In Materials Up To ¼” Thick. Arbors Fit 3/8” And ½”
Drill Chucks
Part No.
Ømm
Part No.
Ømm
APTM116
Arbor for ½”
APTM3048
Arbor Body for
APTM116
APTM117
Arbor for 3/8” chuck
APTM1010A
Arbor Boby for
APTM117
APTM327
Pilot for APTM116 /
APTM117
APTM427
Hex. Wrench 1/8”
A/F
APTM328
Dished Stop Washer
APTM118
Arbor – ½” Chuck
21+ dia.
APTM3063
Pilot for APTM118
Part No.
Ømm
Part No.
Ømm
APTM10250*
¼”
APTM10562*
9/16”
APTM10312*
5/16”
APTM10625*
5/8”
APTM329
Plain Stop Washer
APTM10375*
3/8”
APTM10687*
1 1/16”
APTM464
Grub Screw
APTM10437*
7/16”
APTM10750*
¾”
APTM3008
Compression Spring
APTM10500*
½”
*Kit Sizes
For Holes In Materials Up To ½” Thick. Arbors Fit ½” Drill Chucks
Part No.
Ømm
Part No.
Ømm
APTM120812
13/16”
APTM121125
1 1/8”
APTM120875
7/8”
APTM121187
1 3/16”
APTM120937
15/16”
APTM121250
1 ¼”
APTM121000
1”
APTM121375
1 3/8”
APTM121062
1 1/16”
APTM121500
1 ½”
Specifications subject to change without notice. E&OE. ©
ROTABROACH
IMPERIAL MINI-CUTTERS
ACCESSORIES
H-11
TWIST DRILLS & COUNTERSINKS
TWIST DRILLS – M2 & M42
90º HSS COUNTERSINKS
TWIST DRILLS & COUNTERSINKS
12
FITTED WITH WELDON SHANKS FOR USE
ON ROTABROACH DRILLING MACHINES
TWIST DRILL CUTTING DEPTH – 25MM
STANDARD SERIES M2 DRILL
STANDARD SERIES M42 DRILL
Part No.
Dia. mm
Part No.
Dia. mm
APTTD020425
4
APTTD420425
4
APTTD020525
5
APTTD420525
5
APTTD020625
6
APTTD420625
6
APTTD020725
7
APTTD420725
7
APTTD020825
8
APTTD420825
8
APTTD020925
9
APTTD420925
9
APTTD021025
10
APTTD421025
10
APTTD021125
11
APTTD421125
11
APTTD021225
12
APTTD421225
12
APTTD421325
13
APTTD421425
13.5
•
•
•
Manufactured from super tough high speed steel.
Suitable for all types of portable drills with ¾” shank.
3 cutting edges for smooth chamfering and high surface finish.
Part No.
Twist Drill with
Weldon Shank
ROTABROACH
90º PILOTED HSS COUNTERSINKS
H-12
•
•
•
•
Manufactured from super tough high speed steel.
Suitable for all types of portable drills with ¾” shank.
3 cutting edges for smooth chamfering and high surface finish.
Manufactured with pilot bore for greater stability and accuracy.
Range
APTCK30
Countersinks holes to 30mm dia.
APTCK40
Countersinks holes to 40mm dia.
APTCK55
Countersinks holes to 55mm dia.
90º PILOTED TCT COUNTERSINKS
•
•
•
•
•
Manufactured from super tough high speed steel
TC Tipped for greater tool life and harder materials.
Suitable for all types of portable drills with ¾” shank.
3 cutting edges for smooth chamfering and high surface finish.
Pilot bore for greater stability and accuracy.
Part No.
Range
Part No.
Range
APTPC201
Countersinks holes up to 40mm dia.
APTPT201
Countersinks holes up to 40mm dia.
APTPC100
Kit includes pilots for 14, 18 & 22mm holes.
APTPT100
Kit includes pilots for 14, 18 & 22mm holes.
Specifications subject to change without notice. E&OE. ©
CUTTING MACHINE ACCESSORIES
EXTENSION ARBORS
CUTTER ADAPTORS
13
CUTTING MACHINE ACCESSORIES
Rotabroach Extension Arbors are used when the
face of the hole to be cut is lower than the surface
on which the machine is standing.
Available in various lengths, Extension Arbors have
19.05mm (3/4”) shank fittings which are accepted
in almost all drill stands
Part No.
Extension
APTRD025
25mm
APTRD050
50mm
APTRD075
75mm
APTRD100
100mm
APTRD150
APTRD200
APTRD250
Rotabroach Cutter Adaptors convert standard
19.05mm (3/4”) conventional cutter shanks into
the desired quick fit shank. Economical and easy
to use, these adaptors enable genuine Rotabroach
cutters to be used in other brands of tool.
150mm
200mm
250mm
TWIST DRILL ADAPTORS
Conversion
APTCQ01
Fein Quick-in Shank
APTCQ02
One-touch Shank
APTCQ03
Nitto Threaded Adaptor
MORSE TAPER ADAPTOR
•
All Morse Taper Adaptors come standard with
coolant attachment.
Coolant attachment can be deleted on request.
•
Other fittings & adaptors available on request.
Part No.
M.T.
Shank
D.O.C.
APT21050
2
19.05mm
50mm
APT31050
3
19.05mm
50mm
APT31075
3
19.05mm
75mm
APT31100
3
19.05mm
100mm
Drill Size (mm)
APT33050
3
32mm
50mm
APTRD040
4
APT33075
3
32mm
75mm
APTRD050
5
APT33100
3
32mm
100mm
APTRD060
6
APT41050
4
19.05mm
50mm
APTRD070
7
APT41075
4
19.05mm
75mm
APTRD080
8
APT43050
4
32mm
50mm
APTRD090
75mm
The adaptors fit securely into the bore of the integral
arbor of the magnetic drill and give it greater
versatility at little extra cost.
Part No.
9
APT43075
4
32mm
APTRD100
10
APT51075
5
19.05mm
75mm
APTRD110
11
APT53100
5
32mm
100mm
APTRD120
12
APT51100
5
19.05mm
100mm
Specifications subject to change without notice. E&OE. ©
ROTABROACH
Rotabroach Twist Drill Adaptors are designed for use
with stub length drills from 4mm to 12mm diameter.
Part No.
H-13
CUTTING MACHINE ACESSORIES
CUTTING LUBRICANTS
SWARF STICK
CUTTING MACHINE ACCESSORIES
14
Bio-Degradable Cutting Oil
Cutting Paste
Part No.
Size
Part No.
Container Size
APTP001
can
APTB001
1L
APTB005
5L
Part No.
Container Size
APTL001
1L
Rotabroach Cutting
Fluid has been specifically
formulated to extend cutter
life and improve cutting
performance. The fluid
is either poured into the
reservoir or coolant bottle of
the machine.
Rotabroach Stick Lubricant is
softer than other stick lubricants
for easier application, superior
adhesion and better coverage.
Suitable for ferrous and non
ferrous materials.
APTL005
5L
APTL205
205L
Part No.
(ounce)
APTS0168
1.68
APTS1600
16
PIPE ADAPTOR KIT
The Rotabroach Pipe Adaptor Kit enables Rotabroach
Drilling Machines to be used for cutting holes in
most pipes.
ROTABROACH
Two plates simply attach to the magnet base of
the Drilling Machine providing positive non slip
positioning which assures central location of the
cutter over the pipe.
H-14
The pipe adaptor kit is suitable for all pipes with a
diameter of 60mm or greater.
Pipe Adaptor Kit part number – RD2311
Specifications subject to change without notice. E&OE. ©
The amazing Rotabroach Swarf Stick is a must have addition to any
drilling machine tool kit.
Simply push in the black knob on the handle and place the Swarf Stick
over the ferrous metal swarf or chippings and they will be attracted to
the metal stem of the tool.
The swarf and chips will be attracted by the tool until the black knob is
released over a waste container and they fall off into the container.
Swarf Stick part number – CT/010/100.
SECTION I
FLOOR GRINDERS
PLANETARY GRINDERS
HAND HELD SCARIFIERS
FLOOR SCABBLERS
HAND HELD SCARIFIERS
POLE COMPACTORS
FLOOR PLANERS
PORTABLE MIXERS
SCABBLING HAMMERS
POLE SCABBLERS
FLOOR SCABBLER
CHISEL SCALERS
NEEDLE SCALERS
TRELAWNY
SURFACE
PREPARATION
EQUIPMENT
SCALING HAMMERS
LONG REACH
SCRAPERS & SCALERS
LONG REACH BREAKER
DECK SCALER
FLOOR SCABBLERS
VACUUM SYSTEMS
HYDRAFLEX
•
Trelawny Tools and Equipment is a range of products
designed for the surface preparation of concrete, steel and
stone in industries which include:
- Construction.
- Floor covering and coating.
- Utilities construction and maintenance.
- Marine.
- Offshore oil and gas installations.
- Nuclear maintenance and decommissioning.
- Building restoration, refurbishment and maintenance.
•
The full range of Trelawny Air Tools and other equipment is
covered in the following pages.
•
Trelawny, a UK based Company, has been offering and
developing its range of equipment for over 50 years and its
products are accepted worldwide in the industries to which
they apply.
•
In Australia, Trelawny Tools and Equipment have been sold
and serviced for over 15 years and during this time have
acquired a reputation for quality, reliability and service.
•
Trelawny Tools and Equipment are backed in this Country by
stocks of spare parts and local service facilities.
TRELAWNY CONTENTS
TOOLS
TRELAWNY
CONTENTS
2
I-2
PAGE
Floor Grinders
Single Disc
3
Floor Grinders
Dual Disc
4
Floor Grinders
Disc Accessories
5
Floor Grinders
Planetary
6
Floor Grinders
Planetary Accessories
7
Scarifiers
Hand Held
8
Pole Compactors
Single Head
10
Floor Planers
Electric / Petrol / Air
11
Floor Planers
Production Rates
13
Floor Planers
Accessories
13
Mixing Units
Portable
16
Mixing Units
Accessories
17
Scabbling Hammers
Single & Triple Head
18
Pole Scabblers
Tools & Accessories
20
Floor Scabbler
11 Head
20
Chisel Scalers
Standard & Vibro-Lo
21
Chisel Scalers
Accessories
23
Needle Scalers
Standard & Vibro-Lo
24
Needle Scalers
Accessories
26
Scaler Kits
Needle / Chisel Scalers
27
Scaling Hammers
Single & Triple Head
29
Scaling Hammers
Accessories
30
Long Reach Scrapers Standard & ‘Lite’
31
Long Reach Scalers
31
Standard & ‘Lite’
Long Reach Scrapers Accessories
32
Long Reach Scalers
Accessories
33
Long Reach Breaker
Tools & Accessories
34
Deck Scaler
11 Head
35
Deck Scaler
Accessories
36
Floor Scabblers
5 Head & 11 Head
37
Floor Scabblers
Accessories
38
Vacuum Systems
Pneumatic Machines
39
Drum Top Vacuums
Pneumatic Machines
39
Vacuum Systems
Pneumatic Accessories
40
Drum Top Vacuums
Accessories
41
Trident Neptune
Deck Scaler & Accessories
42
Hydraflex
Hold Cleaner
43
Specifications subject to change without notice. E&OE. ©
FLOOR GRINDERS
FLOOR GRINDERS
345.2000D
3
620mm
TCG 250
This heavy duty single head grinder is ideally suited to small
to medium floor areas. It is used for surface levelling and
preparation before applying new coatings. It can be used on
concrete, granite, marble and stone. Applications include
industrial floor preparation, decontamination and concrete slab
repair. Its robust, simple design ensures reliable service and its
folding handle makes it easy to transport and store.
1035mm
PETROL FLOOR GRINDER
R
HONDA GXV 160 MOTOR
The TCG 250 has a flexible rotating disc designed to remove
surface coatings, adhesives and road markings, remove
ice and oil build-up from cold store floors, smooth and level
concrete, grind terrazzo floor tiles and for polishing. It comes
as standard with a 20 segment diamond disc but other options
are available for different applications. Available with petrol or
electric motor.
345.2004D
Aeq 2.11m/sec2
CUTTING WIDTH
DISC SPEED
DISC SIZE
POWER
WEIGHT
345.2006D
Aeq 2.11m/sec
1m/sec2
620mm
1035mm
DISC SIZE
POWER
WEIGHT
250mm
1250rpm
250mm
2.2kW 3HP
97kg
Single phase electric grinder for grinding and
polishing. Especially convenient for indoors
where petrol machines are not appropriate due to
exhaust fumes.
1035mm
415V ELECTRIC FLOOR GRINDER
CUTTING WIDTH
DISC SPEED
DISC SIZE
POWER
WEIGHT
250mm
1250rpm
250mm
2.2kW 3HP
94kg
3 phase electric grinder for applications that
are more demanding.
TRELAWNY
240V ELECTRIC FLOOR GRINDER
DISC SPEED
250mm
1070rpm
250mm
4.1kW 5.5HP
94kg
Petrol grinder for grinding and polishing outdoors.
620mm
CUTTING WIDTH
FLOOR GRINDERS
Trelawny Floor Grinders are an effective tool for general
purpose concrete grinding and surface preparation. Uses
include removing high spots from concrete surfaces, grinding
Terrazzo floor tiles, removing build-up of coatings and debris
from floors and for smoothing or levelling concrete to eliminate
trip hazards.
For Floor Grinder Accessories see page I-5
Specifications subject to change without notice. E&OE. ©
I-3
FLOOR GRINDERS
350.2000B
TCG 500
4
FLOOR GRINDERS
The TCG 500 is a similar tool to the TCG 250 but
features dual counter rotating discs which doubles its
productivity.
Applications include grinding of large concrete surface
areas such as at shopping malls and hospitals, removal
of old coatings and contaminants such as on factory
floors and car parks, scarifying to remove oil and dirt
from surfaces at airports, ice removal from cold store
floors, floor preparation in food processing plants,
grinding Terrazzo floor tiles and resinous based
coatings, smoothing and levelling concrete before
coating, etc.
The discs are available with a range of different
abrasives for various applications but come standard
with carborundum blocks. The machines are available
with petrol or electric motors.
Aeq 3.1m/sec2
660mm
914mm
PETROL FLOOR GRINDER
RINDER
CUTTING WIDTH
590mm
2 x 250mm
8.2kW 11HP
179kg
DISC SIZE
POWER
WEIGHT
Petrol floor grinder for grinding large surface
areas in outdoor applications.
350.2004D
350.2006D
Aeq 1.6m/sec2
Aeq 1.6m/sec2
TRELAWNY
660mm
I-4
660mm
914mm
914mm
240V ELECTRIC FLOOR GRINDER
CUTTING WIDTH
DISC SIZE
POWER
WEIGHT
590mm
2 x 250mm
2.2kW 3.0HP
114kg
For use where electricity is readily available,
particularly in indoor applications.
Specifications subject to change without notice. E&OE. ©
415V ELECTRIC FLOOR GRINDER
CUTTING WIDTH
DISC SIZE
POWER
WEIGHT
590mm
2 x 250mm
5.5kW 7.4HP
121kg
3 phase model for use where more power is needed in
heavy duty applications.
FLOOR GRINDERS
ACCESSORIES - FLOOR GRINDERS
5
PRODUCT
PART NO.
DESCRIPTION
APPLICATION
350.5519
Wire brush insert
For removal of workshop soiling, light paint, grease, wax, food by-products
& rubber carpet backing. Roughens linoleum and vinyl tiles prior to
application of a new coating.
350.5509
Abrasive block
(coarse 24 grit)
These are fitted as standard on machines fitted with grinding block option
and are designed for rapid removal of material. They produce a surface
finish suitable for directly laying floor coverings or for two part epoxy paint
coatings and for the first grind of terrazzo floor surfaces.
350.5507
Abrasive block
(medium 60 grit)
These are less aggressive than the coarse blocks, they should provide a
surface finish suitable for painting or used as the next stage to the coarse
grinding blocks when achieving a polished surface on terrazzo tiles or other
marble type surfaces.
350.5505
Abrasive block
(fine 120 grit)
These are the least aggressive of all the grinding media and are generally
only used for final finishing to provide a surface suitable for final polishing.
350.5525
Scarifying
block insert
FLOOR GRINDERS
THE TCG 250 COMES STANDARD WITH A DIAMOND DISC AND THE TCG 500 WITH CARBORUNDUM ABRASIVE BLOCKS.
OTHER OPTIONS ARE:
More aggressive than the wire brush inserts for removal of workshop soiling
and paint, varnish, epoxy, fibreglass & grout. Roughens floors prior to
coating applications. The beam flail minimises damage to the surface cap.
320.3658
Star cutter
(14 per set)
350.5610R
Diamond plate
10 segment
250mm ø
350.5620R
Diamond plate
20 segment
250mm ø
350.5610RA
Diamond plate
10 segment
250mm ø
Ideal for larger grinding projects. Softer matrix provides more aggressive
action for diamond grits. Resists clogging better than stones and provides
up to 15 times greater service life. Soft bond for hard surfaces such as
concrete, flints, granites and terrazzo.
Hard bond for softer abrasive surfaces such as new concrete(less than
3 days old), asphalt, limestone including grinding for preparation prior to
recoating.
Diamond plate
20 segment
250mm ø
350.5502
Hardwood wedge
For retaining wire brush inserts, abrasive blocks and scarifying block
inserts.
350.9142
Diamond plate
adaptor kit
For conversion from block inserts to diamond disks.
350.9135
Weight
Available for 5.5HP and 11HP petrol powered machines. Maximum of two
fitted to the deck of the machine.
Specifications subject to change without notice. E&OE. ©
TRELAWNY
350.5620RA
I-5
PLANETARY GRINDERS
TPG 540
PLANETARY GRINDERS
PLANETARY GRINDERS
6
Trelawny Planetary Grinders are designed as a low
vibration machine for specialist concrete polishing
and finishing. Ideal for removing tough coatings such
as glue, paint, adhesives and other coverings as well
as reducing and polishing concrete.
570mm
The three grinding discs are available with a range of
grades of diamond abrasives for various grinding and
polishing applications. All models are only available
with electric motors.
0000mm
415V ELECTRIC
PLANETARY GRINDER
TPG 650
GRINDING DIAMETER
GRINDING PRESSURE
DISC SIZE
SPEED
POWER
AMPS
Aeq 1.6m/sec2
FREQUENCY
WEIGHT
540mm
200-320kg
3 x 220mm
1100rpm
7.5HP
12
50Hz
135kg
The TPG 540 Planetary Grinder has a range of
applications including concrete reduction and removal
of tough coatings, e.g. adhesives, paint, screed, glue
and other coverings. It works on concrete, terrazzo
and stone floors under wet and dry conditions.
TPG 650/C/S
700mm
1080mm
TRELAWNY
415V ELECTRIC
LECTRIC
PLANETARY
TARY GR
GRINDER
I-6
415V ELECTRIC
PLANETARY GRINDER
40L WATER TANK
GRINDING DIAMETER
GRINDING PRESSURE
DISC SIZE
SPEED
POWER
AMPS
FREQUENCY
WEIGHT
650mm
200-320kg
3 x 220mm
300-1400rpm
7.5kW 10HP
16
50Hz
260kg
The TPG 650 Planetary Grinder has similar applications
to the TPG 540 but is a larger machine which increases
efficiency and productivity. The robust clutch system
reduces operator error and the carefully balanced
suspension system makes grinding and polishing easy.
Features a 40 litre water tank for wet grinding and
polishing.
Specifications subject to change without notice. E&OE. ©
40L WATER TANK / SOFT START
700mm
GRINDING DIAMETER
GRINDING PRESSURE
DISC SIZE
1080mm
SPEED
POWER
AMPS
FREQUENCY
WEIGHT
650mm
200-320kgg
3 x 220mm
900rpm
7.5kW 10HP
16
50Hz
260kg
Aeq 1.6m/sec2
Deluxe model of TPG 650 with added features of soft
start and spinning clutch.
PLANETARY GRINDERS
ACCESSORIES - PLANETARY GRINDERS
7
PRODUCT
PART NO.
DESCRIPTION
APPLICATION
365.5495L
Barracuda™ Max
(-L or-R) on H-Plate, Gold
Quick removal of adhesive and coatings, smoothing of bumpy concrete
surfaces and removal of asphalt topping.
365.5495R
Barracuda™ Light
(-L or-R) on H-plate, Gold
Quick removal of adhesive and coatings. Quick removal of extremely hard
coatings. Ideal for light machines (less than 100kg)
365.5501/2
XP-1, Black (soft bond)
30/40 grit
For extremely hard concrete. First step grinding and levelling of rough and
uneven concrete floors.
365.5502/2
XP-2, Red (normal bond)
30/40 grit
Universal. First step grinding and levelling of rough and uneven concrete
floors.
365.5503/2
XP-3, Blue (hard bond)
30/40 grit
For new and soft concrete. First step grinding and levelling of rough and
uneven concrete floors.
365.5504/2
XP-4, Brown
50/60 grit
Terrazzo. Step 2 grinding to remove the scratches after using XP-1 or
XP-3.
365.5506/2
XP-6, Silver
60/70 grit
Terrazzo. Step 2 grinding to remove the scratches made by XP-1 to XP-3.
365.5510
HP-10, Green
100 grit
Universal. Grinding and polishing of concrete floors after XP-6.
365.5515
HP-15, Steel blue
150 grit
Universal. Grinding and polishing of concrete floors after XP-6.
365.5520
HP-20, Violet
200 grit
Universal. Recommended for wet application.
365.5530
HP-30, Orange
300 grit
300 grit, universal. Recommended for wet application.
365.5540
HP-40, Goldenrod
400 grit
Universal. Recommended for wet application.
365.5560
HP-60, White
600 grit
Universal. Recommended for wet application.
365.5710
Mounting plate for segments (flower centre)
365.5720
Mounting plate for segments (triangle centre)
PLANETARY GRINDERS
DIAMOND ABRASIVES FOR THE TRELAWNY PLANETARY GRINDERS ARE:
POLISHING PADS FOR THE TRELAWNY PLANETARY GRINDERS ARE:
PART NO.
DESCRIPTION
APPLICATION
365.5602
PD-220, Red
220 grit
Universal, wet application. Polishing of terrazzo / concrete floors after using
HP-40 or HP-60
365.5604
PD-400, Yellow
400 grit
Universal, wet application.
Polishing of terrazzo / concrete floors after using PD-220
365.5608
PD-800, White
800 grit
Universal, wet application.
Polishing of terrazzo / concrete floors after using PD-400.
365.5618
PD-1800, Blue
1800 grit
Universal, wet application.
Polishing of terrazzo/ concrete floors after using PD-800.
365.5635
PD-3500, Grey
3500 grit
Universal, wet application.
Polishing of terrazzo / concrete floors after using PD-1800.
365.5730
Mounting plate for hook & loop fitting pads (flower plates)
365.5740
Mounting plate for hook & loop fitting pads (triangle plates)
Specifications subject to change without notice. E&OE. ©
TRELAWNY
PRODUCT
I-7
HAND HELD SCARIFIERS
194.0205
HAND HELD SCARIFIERS
HAND HELD SCARIFIERS
8
194.C205
These versatile high production
tools are ideal for the removal of
coatings from both steel and concrete
substrates. Quick change hubs with an
assortment of abrasives enable you to
remove everything from mastics and
alkyds to epoxy coatings, rapidly and
keeping dust to a minimum.
The Trelawny hand held scarifier, with
star or beam cutters, can even remove
coatings from some piping and curved
surfaces. These tools are lightweight so
they can be used vertically or overhead
and are available in pneumatic and
electric powered models, 2” or 4”wide
and for use with a range of cutters or
abrasives.
170mm
170mm
HAND HELD SCARIFIER
HAND HELD SCARIFIER
PNEUMATIC / 50MM CUTTING WIDTH /
FOR USE WITH ABRASIVE FLAPS
PNEUMATIC / 50MM CUTTING WIDTH /
FOR USE WITH CUTTERS
WORKING WIDTH
FREE SPEED
POWER
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
194.1220
194
19
4.12
1220
20
345mm
345mm
WORKING WIDTH
55mm
2700rpm
0.89kW 1.2HP
840L/min 30cfm
1/4”BSP
4.3kg
FREE SPEED
POWER
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
194.0405
55mm
2700rpm
0.89kW 1.2HP
840L/min 30cfm
1/4”BSP
5.8kg
194.C405
345mm
345mm
m
345mm
220mm
22
TRELAWNY
220mm
22
170mm
HAND HELD SCARIFIER
HAND HELD SCARIFIER
HAND HELD SCARIFIER
240V ELECTRIC / 50MM CUTTING WIDTH /
FOR USE WITH ABRASIVE FLAPS
PNEUMATIC / 100MM CUTTING WIDTH /
FOR USE WITH ABRASIVE FLAPS
PNEUMATIC / 100MM CUTTING WIDTH /
FOR USE WITH CUTTERS
WORKING WIDTH
FREE SPEED
POWER
WEIGHT
AIR CONSUMPTION
AIR INLET SIZE
60mm
2000rpm
1.2kW 1.6HP
4.6kg
840L/min 30cfm
1/4”BSP
WORKING WIDTH
FREE SPEED
POWER
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
110mm
2700rpm
0.89kW 1.2HP
840L/min 30cfm
1/4”BSP
4.9kg
WORKING WIDTH
FREE SPEED
POWER
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
110mm
2700rpm
0.89kW 1.2HP
840L/min 30cfm
1/4”BSP
6.5kg
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
I-8
Specifications subject to change without notice. E&OE. ©
HAND HELD SCARIFIERS
ACCESSORIES - HAND HELD SCARIFIERS
9
LIGHT BURNISHING
STAR CUTTER
PRODUCT
BEAM CUTTER
C FLAP
PART NO.
DESCRIPTION
SPECIFIC APPLICATION
312.MRPC
C type flaps
Removal of light paint and rust from steel and concrete surfaces.
6 flaps for 2” machine.
12 flaps for 4” machine.
312.S200
Quality carbon
steel star cutters
Aggressive removal of thick coatings and epoxy coatings include non slip.
312.R200
Quality carbon
steel beam cutters
Removal of light rust and paint leaving a smooth surface with
reduced stress lines.
438.0205
Hub with pins - 50mm
For use with C Type flaps.
438.0405
Hub with pins - 100mm
438.0209
Hub for cutters - 50mm
438.0409
Hub for cutters - 100mm
HAND HELD SCARIFIERS
HEAVY SCALING
For use with star or beam cutters
TRELAWNY
Specifications subject to change without notice. E&OE. ©
I-9
POLE COMPACTORS
POLE COMPACTORS
10
VLLRS55
POLE COMPACTORS
Trelawny Pole Compactors are powerful tools for tamping
backfill in and around deep guide posts and utility poles.
Pole Compactors have been proved as the ideal tool for the
re-instatement of materials on roads and footpaths where
holes have been dug for inspection of leaks, faults and
cables. Alternative compacting tools are large, heavy and
often need a large surface area to work on. This leads to a
larger hole than necessary being dug, resulting in more time
and expense being added to the job than is necessary.
Also used in the construction industry for compacting
around pipes and signposts, tamping and compacting
narrow trenches being refilled and in the fencing industry
for tamping around fence posts. Pole Compactors are a
single operator lift and finite control of the tamping means
that inspection holes can be excavated at sizes no bigger
than are needed. A range of tamper feet are available to
suit most applications. Pole Compactors can easily be
converted to Pole Scabblers by replacing compactor foot
with a scabbling head
170mm
1392mm
POLE COMPACTOR
LOW VIBRATION - SINGLE HEAVY DUTY HEAD
BLOWS PER MIN
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
1100
708L/min 25cfm
1/4”BSP
20kg
RS55 for added oper
Vibration reduced model of LRS55
operator
co
comfort, reduced fatigue and improved operator control.
Aeq 3.5m/sec2
Code: 150.52100 with 100mm square foot
0.5220 with 150 x 125mm foot
Code: 150.5220
LRS55
POLE COMPACTOR
SINGLE HEAVY DUTY HEAD
BLOWS PER MIN
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
1100
708L/min 25cfm
1/4”BSP
13.5kg
1270mm
Code: 150.5010 with 100mm square foot
Code: 150.5020 with 150 x 125mm foot
Code: 150.5030 with 125mm round foot
170mm
S
ACCESSORIES - POLE COMPACTORS
TRELAWNY
PART NO.
DESCRIPTION
SPECIFICATIONS
450.5001 (screw fit)
450.5011 (pin fit)
100 x 100mm Compactor foot
Standard foot for use on most tamping jobs
450.5003 (screw fit)
450.5013 (pin fit)
127 x 152mm Compactor foot
Ideal for tamping close to walls and street fittings
450.5006 (screw fit)
450.5016 (pin fit)
200 x 100mm Compactor foot
Mainly used for narrow trench work such as cable laying
450.5007 (screw fit)
450.5017 (pin fit)
127mm diameter Compactor foot
Used for general compacting work
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
I-10
Specifications subject to change without notice. E&OE. ©
FLOOR PLANERS
FLOOR PLANERS
320.2000
11
FLOOR PLANERS
Trelawny Floor Planers are the ideal tool for cleaning
and keying concrete floors as well as rapidly
removing scale, rust, paint and other deposits from
steel surfaces. Available with air, electric or petrol
motors and a range of different cutters for varying
applications.
432mm
TFP 200
940mm
Heavy duty walk behind floor planer for use with a
range of different cutters for various applications.
Suitable for rapidly removing scale, rust, paint and
other deposits from steel surfaces in preparation for
re-coating and will quickly produce an ideal key or
grooved profile on concrete.
Also very efficient at cleaning concrete surfaces in
preparation for painting, removing lines, ice, soiling
and grease as well as removing contaminant during
decommissioning. Often used for removing road
lines and planing concrete paths etc to remove
trip hazards. Average depth of cut for concrete
reduction is 3mm. Features and benefits include:
200MM PETROL FLOOR PLANER
LANER
•
Accurate depth control for improved overall
performance and extended cutter life
•
Height adjustable handle-bar to adjust to
operators’ height
•
Can be fitted with a vacuum system
Petrol floor planers are ideal for outdoor
applications where access to electricity and
compressed air is limited. Not recommended for
indoors due to the hazard of exhaust fumes in
confined spaces. Has the added advantage of not
having the restrictions of air hoses or power leads.
•
Large diameter rear wheels for better mobility
•
Additional two front wheels for stability
TFP250
4.1kW 5.5HP HONDA MOTOR
WORKING WIDTH
CUTTER SPEED
POWER
WEIGHT
320.2004
A robust heavy duty floor scarifying machine,
designed for heavy applications such as aggressive
concrete reduction, concrete grooving laitance
removal or keying ready for resurfacing. The uses of
the TFP 250 are similar to TFP200 but with a greater
cutting capacity and wider working area which
increases productivity.
432mm
The motor has been positioned to place the weight
directly above the cutter drum for a firm ground
holding cut. Available with petrol or electric motors.
Features and benefits include:
250mm full cutting width
•
Vacuum adaptor fitted as standard so a
vacuum system can be connected for rapid
dust removal
•
6 shaft cutter drum for smoother operation
•
Variable cutting depth with locking mechanism
for consistent material removal
•
Quick lift mechanism maintains depth settings
for continuity of cut
•
Vibration reduced handle reduces
operator fatigue
940mm
TRELAWNY
•
195mm
1833rpm
4.1kW 5.5HP
HP
59kg
200MM - 240V ELECTRIC
FLOOR PLANER
WORKING WIDTH
CUTTER SPEED
POWER
WEIGHT
195mm
1650rpm
2.2kW 2.95HP
HP
68kg
Electric floor planers are convenient where
electricity is readily available and in confined
spaces where they eliminate the hazard of the
fumes that the petrol machines produce.
Specifications subject to change without notice. E&OE. ©
I-11
FLOOR PLANERS
320.2006
320.2012
FLOOR PLANERS
12
630mm
630mm
900mm
900mm
200MM - PNEUMATIC
FLOOR PLANER
200MM - 415V ELECTRIC
C FLOOR
PLANER
WORKING WIDTH
CUTTER SPEED
POWER
WEIGHT
195mm
1650rpm
2.2kW 2.95HP
68kg
WORKING WIDTH
195mm
1528rpm
m
4956L/min 175cfm
3/4” BSP
3.73kW 5.0HP
45kg
CUTTER SPEED
AIR CONSUMPTION
AIR INLET SIZE
POWER
3 phase model with greater capacity and
performance than the single phase model.
WEIGHT
Pneumatic floor planers are the only option in
flammable or potentially hazardous areas.
Pneumatic motors have the added advantage
that they cannot be overloaded or burnt out.
325.2000
325.2006
360mm
360mm
1000mm
TRELAWNY
1000mm
250MM -PETROL
FLOOR PLANER
250MM -415V ELECTRIC
FLOOR PLANER
5.96kW 8HP HONDA MOTOR
R
WORKING WIDTH
CUTTER SPEED
POWER
WEIGHT
WORKING WIDTH
CUTTER SPEED
250mm
1850rpm
5.9kW 8.0HP
122kg
Petrol version of TFP 250 for outdoor applications.
Convenient for applications where access to air and
electricity is limited and doesn’t have the added
restrictions of air hoses and electrical leads.
POWER
WEIGHT
250mm
1750rpm
5.5kW 7.5HP
134kg
Heavy Duty 3 phase electric model
Aeq 8.8m/sec2
Aeq 2.4m/sec2
For accessories for Floor Planers see next page
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
I-12
Specifications subject to change without notice. E&OE. ©
FLOOR PLANERS
PRODUCTION RATES
13
ESTIMATED PRODUCTION - RATE/HOUR
AVERAGE CUTTER LIFE
TFP200 WIth TCT Cutters
30m2
1000-1500m2
TFP200 WIth Star Cutters
25m2
300-500m2
TFP200 With Beam Cutters
20m2
300-500m2
TFP200 With Milling Cutters
25m2
1000-1500m2
TFP250 WIth TCT Cutters
40m2
1000-1500m2
TFP250 WIth Star Cutters
33m2
300-500m2
TFP250 With Beam Cutters
25m2
300-500m2
TFP250 With Milling Cutters
33m2
1000-1500m2
FLOOR PLANERS
MODEL
ACCESSORIES - FLOOR PLANERS
HEAVY SCALING
STAR CUTTER
BEAM CUTTER
WIRE BRUSH
ASSEMBLY
Specifications subject to change without notice. E&OE. ©
TRELAWNY
TUNGSTEN
CARBIDE TIPPED
LIGHT BURNISHING
I-13
FLOOR PLANERS
ACCESSORIES - TFP 200 SERIES
14
TRELAWNY
FLOOR PLANERS
PART NO.
I-14
DESCRIPTION
APPLICATION
320.5500
5 Point TCT Cutter
320.1020ST
Drum Assembly
TCT Cutters
320.5600
Milling Cutter
– 22mm wide
320.5650
Milling Cutter
– 11mm wide
320.1020SM
Drum Assembly
– milling cutters
320.5120
Beam Cutter
– 43mm diameter
320.1020SB
Drum Assembly
- beam cutter
320.3658
Star Cutter
– 43mm diameter
320.1020SS
Drum Assembly
- star cutters
320.9610
Crimped wire
brush assembly
For burnishing and surface rust removal.
320.9620
Twist knot wire
brush assembly
For removal of general workshop soiling and light paint removal.
320.002H
Heavy duty drum
Fitted as standard, includes 12mm hardened steel cutter shafts.
320.002G
Long life drum
Double web drum for heavy duty applications.
320.0020
12mm Cutter Shaft
320.4140
Spacing washer
Specifications subject to change without notice. E&OE. ©
Hard wearing tungsten tips for removing heavy corrosion areas
and thick layers of paint.
Removal of thermoplastic road markings, runway markings, bituminous
coatings, two part epoxy paints and rubber deposits.
Removal of light rust and paint leaving a smooth surface with
reduced stress lines.
Removal of heavy corrosion and very thick paint coatings.
FLOOR PLANERS
ACCESSORIES - TFP 250 SERIES
15
PART NO.
DESCRIPTION
APPLICATION
5 Point TCT Cutter
Hard wearing tungsten tips for removing heavy corrosion areas and thick
layers of paint.
325.1020ST
Heavy Duty Drum Assembly - TCT
Cutters
320.1010DT
Long Life Drum
Assembly - TCT Cutters
325.1010GT
Grooving Drum
Assembly - TCT Cutters
320.5600
Milling Cutter
320.5650
1/2 Size
Milling Cutter
320.1010DM
Heavy Duty Drum Assembly - Milling
Cutter
320.5120
Beam Cutter
325.1010SB
Heavy Duty Drum Assembly - Beam
Cutter
325.1010DB
Long Life Drum
Assembly - Beam Cutter
320.3658
Star Cutter
325.1010SS
Drum Assembly
- Star Cutters
325.1010DS
Long Life Drum
Assembly - Star Cutters
325.00CD
Heavy Duty Drum
Fitted as standard, includes 12mm hardened steel cutter shafts.
325.00DW
Long Life Drum
Double web drum for heavy duty applications
325.0010
12mm Cutter Shaft
320.4140
Spacing Washer
FLOOR PLANERS
320.5500
Removal of thermoplastic road markings, runway markings, bituminous
and rubber deposits.
Removal of light rust and paint leaving a smooth surface with reduced
stress lines
Removal of heavy corrosion and very thick paint coatings.
TRELAWNY
Specifications subject to change without notice. E&OE. ©
I-15
PORTABLE MIXING UNITS
EM 125 S
HIPPO PORTAMIX
PORTABLE MIXING UNITS
16
The Portamix Hippo is the mixing station for all flooring and coating specialists. The
Portamix makes the mixing and placing of a wide range of construction compounds
much easier, faster and safer. This new patented concept was developed as a
result of a huge demand for a product that would mix and pour large quantities of
compounds thoroughly, efficiently and quickly and at the same time reduce injuries
such as back strain and other OH&S issues.
The Portamix will efficiently mix 80 litres or 130kg which is 5 x 20kg bags of
compound plus water. Floor levelling compounds, gypsum, cement screeds,
render products, slurries, epoxy self levellers, grout, mortar, texture coatings,
sealants, adhesives and many other pourable and high slump materials can be
mixed efficiently and without mess while reducing labour and physical effort. Even
materials containing decorative aggregate or stone chip are mixed with consistency
due to the combination of the mixing canister and helix design. One flooring
contractor has reported his well spent investment in a Portamix has meant some
3 man jobs now only take 2 and some 2 man jobs now only take 1 which not only
increases productivity but substantially increases profits. Often multi-stage pours
now are no longer necessary. The development of the Portamix involved a lot of
research and testing to come up with a unit that would not leave unmixed pockets
of compound, would pour easily into smaller containers or direct onto the floor
and be easily manoeuvred on building sites. The balanced easy-tilt cradle allows
accurate placement of material and the easy-roll mobility lets you pour and spread
flooring compound at the same time. Flooring contractors, plasterers, painters,
waterproofers, tilers, concreters and many other trades and industries all prove the
benefits of the Portamix.
1000mm
360mm
PORTABLE HAND MIXER
ELECTRIC / LIGHTWEIGHT / VARIABLE
STAGE TRIGGER
MOTOR
SPEED
The Portamix is available in 2 models, one is for flat floor pouring and the second for
rugged building site pouring.
A range of paddles is available for different compounds. The 2 speed electric motor
is standard but a pneumatic option is available. The Portamix is not to be used with
inflammable products.
WEIGHT
Powerful, lightweight mixer for smaller jobs. Wide
choice of paddles for many applications and paddle
design ensures minimal splashing.
PMH 70X
PMH 70F
750mm
595mm
1480mm
TRELAWNY
1320mm
HIPPO PORTAMIX
F - SERIES
HIPPO PORTAMIX
X - SERIES
ELECTRIC / 4 CASTORS FOR FLAT
FLOOR POURING
ELECTRIC / 2 LARGE WHEELS FOR
RUGGED BUILDING SITE MIXING
BOWL CAPACITY
MIXING PADDLE
MOTOR
PADDLE MOUNTING
WEIGHT
80L 130kg
TW200D large
ge
dual helix
1800W 2.4HPP
2 speed
Reversible for
“alongside” mixing
44kg
BOWL CAPACITY
MIXING PADDLE
MOTOR
PADDLE MOUNTING
WEIGHT
80L 130kg
TW200D largee
dual helix
1800W 2.4HP
2 speed
Reversible for
“alongside” mixing
45kg
The ‘F’ series Portamix is designed for floor coatings, allowing the
contractor to dispense the material directly on to the floor, moving the
Hippo around with ease to spread as dispensing.
The ‘X’ series Portamix features 2 large wheels for easy manoeuvring
over rough ground and stands higher off the ground so material can be
easily decanted into buckets placed under the pouring spout.
PMH70F Pneumatic model with 1641W 2.2HP air motor also available.
Ideal for wet and inflammable environments.
PMH70X Pneumatic model with 1641W 2.2HP air motor also available.
Ideal for wet and inflammable environments.
Enquire about parts & service for this equipment.
I-16
1100W 1.4HP
0-450rpm
4.4kg excluding paddle
Specifications subject to change without notice. E&OE. ©
PORTABLE MIXING UNITS
ACCESSORIES - PORTABLE MIXING UNITS
17
M14 PADDLES
PART NO.
LENGTH
DIAMETER
APPLICATION
700mm
700mm
120mm
140mm
Thin liquids and paints.
TR120
TR140
700mm
700mm
120mm
160mm
Steep mixing blades for levelling compounds, bitumen coatings,
paint, grouting compounds and spreading compounds.
TM120 NEG
TM140 NEG
700mm
700mm
140mm
160mm
3 blade paddle forces material from top down. For dispersions,
paints, plasters, gypsum lime and mortars.
TM120
TM140
700mm
700mm
140mm
160mm
3 blade paddle forces material from bottom up. Plasters, paste
granules, slurry resins and epoxy.
TW120
TW140
TW200
700mm
700mm
700mm
140mm
160mm
200mm
Plasters, concrete mortars, resins and tile adhesives.
200mm
Self-levelling compounds, screeds, paints, plasterfill and epoxy.
Double helix for use within the Hippo Portamix.
700mm
TW200D
PORTABLE MIXING UNITS
TF120
TF140
PLAIN SHAFT MIXING PADDLES FOR DRILLS - SUIT ALL 13MM CHUCKS
PADDLE ADAPTORS
80mm
PKR80
400mm
PL90
500mm
90mm
Paints, thin liquids and adhesives.
Best at high speeds.
PR120S
590mm
120mm
Paints, spreading compounds, bitumen coatings and grout.
PM120S
590mm
120mm
Plasters, paste granules and epoxy.
MJ130
590mm
120mm
Adjustable fins to suit quantity. Ideal for plaster and mortar.
PART NO.
Thin liquids and paints
SIZE
M14 / 1/2 x 20
483944
M14 / 13mm HEX
DCM14
M14 / 12mm dia.saft
49500
49502
M14 / 1/2 x 20
M14 / 5/8 x 11
Specifications subject to change without notice. E&OE. ©
TRELAWNY
484292
I-17
SCABBLING HAMMERS
196.5100
SCABBLING HAMMERS
SCABBLING HAMMERS
18
Trelawny single and triple head Scabbling
Hammers, in several distinct versions, are ideal
tools to compliment needle scalers in more
demanding applications for surface preparation.
Heavy duty scabblers, with one piece pistons
have proven to be the choice for ‘fracturing’
thicker, tough to remove materials and concrete
dressing.
The Trelawny Triple Head Scabblers can be
converted to an in-line or straight configuration
for hard to reach areas by simply exchanging the
side handle with the main handle. All Trelawny
Scabbling Hammers can be fitted with an
optional vacuum shroud for dust free working.
Trelawny Scabbling Hammers have
interchangeable heads for various applications.
Fitted with replaceable Tungsten Carbide tipped
taper fit heads, the Scabbling Hammer becomes
a scaling hammer for use on steel surfaces (see
Scalers – Scaling Hammers in this section).
Scabbling Hammers use single piece Tungsten
Carbide tipped head/piston combination for
preparation of concrete surfaces.
485mm
LOW VIBRATION SINGLE HEAD
SCABBLER
PNEUMATIC
BLOWS PER MIN
AIR CONSUMPTION
AIR INLET SIZE
There are 2 versions of these heads available
– Tungsten Carbide tipped cruciform heads
(standard) which are for use in texturing and
roughening of concrete and Tungsten Carbide
tipped bush hammer heads (optional) for use in
laitance removal and exposing the aggregate in
concrete.
160mm
WEIGHT
WIDTH
3000
298L/min 10.5cfm
3/8” NPT
2.7kg
55mm
Low vibration version of 151.5200 for added
operator comfort and reduced operator fatigue.
Aeq 3.7m/sec2
153.5200 / 153.5250
151.5200 / 151.5250
TRELAWNY
SINGLE HEAD SCABBLER
PNEUMATIC
BLOWS PER MIN
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
TRIPLE HEAD SCABBLER
PNEUMATIC / SUPPLIED WITH
OPTIONAL SIDE HANDLE
160mm
2400
198L/min 7cfm
3/8” BSP
2.6kg
55mm
For use in confined spaces and smaller
surface areas such as keying in preparation
for subsequent pouring. Particularly
convenient for scabbling between reinforcing
bars, preparation of cracks in floors prior to
repairs, laitance removal of weaker surface
layers where extreme bearing strength
is applied and for aggregate exposure on
decorative panels.
151.5200 - Cruciform Head
151.5250 - Bush Hammer Head
BLOWS PER MIN
AIR CONSUMPTION
465mm
AIR INLET SIZE
WEIGHT
WIDTH
3 x 2400
450L/min 15.9cfm
3/8” NPT
5.3kg
280mm with side handle
170mm without side handle
Triple Head Scabblers are the largest of the hand
scabblers and have similar applications to the single
scabblers but are ideal for larger surface areas.
153.200 - Cruciform Heads
153.5250 - Bush Hammer Heads
155mm
460mm
For Hose & Fittings see section 'P'
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
I-18
Specifications subject to change without notice. E&OE. ©
SCABBLING HAMMERS
153.6070 / 153.6075
153.6050
19
540mm
LOW VIBRATION TRIPLE
HEAD SC
SCABBLER
TRIPLE HEAD BACK
HANDLE SCABBLER
PNEUMATIC
N
/ SUPPLIED WITH
OPTIONAL SIDE HANDLE
PNEUMATIC
BLOWS PER MIN
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
BLOWS PER MIN
AIR CONSUMPTION
3 x 3000
450L/Min 15.9cfm
3/8” NPT
6.1kg
280mm with side
handle
170mm without side
handle
AIR INLET SIZE
WEIGHT
WIDTH
220mm
460mm
3 x 2800
450L/min 15.9cfm
3/8” NPT
4.7kg
163mm
SCABBLING HAMMERS
155mm
New design of triple head scabbler with back handle for better
control and more comfortable and easier operation.
Only Available with single piece pistons.
Aeq 4.7m/sec2
Low vibration version of 153.5200 for added
operator comfort and reduced operator fatigue.
153.6070 – Cruciform heads
153.6075 – Bush Hammer Heads
SCABBLING HAMMER ACCESSORIES
SCABBLER HEADS
PART NO.
DESCRIPTION
APPLICATION
Head – Screw thread fit
(heavy duty) – TCT Bush
Replaceable cutter head. For use in scabbling hammers for laitance removal
and exposing the aggregate in concrete. Leaves a key profile when used for
scabbling.
426.5356
Head – Screw thread fit
(heavy duty) – TCT Cruciform
Replaceable cutter head. For use in scabbling hammers for the reduction,
texturing and roughening of concrete.
612.5320
Single piece piston
(heavy duty) – TCT Cruciform
One piece piston and cutter head combined. For use in scabbling hammers
for the reduction, texturing and roughening of concrete.
612.5325
Single piece piston
(heavy duty) – TCT Bush
One piece piston and cutter head combined. For use in scabbling hammers
for laitance removal and exposing the aggregate in concrete. Leaves a key
profile when used for scabbling.
VACUUM SHROUDS
Vacuum shrouds are available for most
models of scabbling hammers so they can
be connected to a vacuum system or dust
extractor for a dust free environment.
PART NO.
DESCRIPTION
437.5100
Single heads –
151.5200
151.5250
437.5300
Triple head –
153.5200
153.5250
TRELAWNY
426.5353
For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
I-19
POLE SCABBLERS
150.5000
150
15
0.50
5000
00
POLE SCABBLERS
POLE SCABBLERS / FLOOR SCABBLERS
20
150
15
150.9250
0.92
9250
50
Pole Scabblers are a versatile tool
with a single scabbling head that is
interchangeable with tamper feet.
This means that the same tool can be
used as a scabbler or compactor (see
‘Compactors’ at the beginning of this
section).
Pole Scabblers are the ideal tool for
scabbling in deep, hard-to-reach areas
such as keying between reinforcing bars
and foundation dressing and are also very
effective in high spot removal on concrete.
1392mm
1270mm
LOW VIBRATION POLEE SCABBLER
POLE SCABBLER
9 POINT SCABBLER HEAD
9 POINT SCABBLER HEAD
BLOWS PER MIN
AIR CONSUMPTION
AIR INLET SIZE
VIBRATION LEVEL
WEIGHT
BODY DIA.
BLOWS PER MIN
AIR CONSUMPTION
1100
708L/min 25cfm
1/4”BSP
35m/s2
13.4kg
80mm
AIR INLET SIZE
VIBRATION LEVEL
WEIGHT
BODY DIA.
1300
708L/min 25cfm
1/4”BSP
4.2m/s2
19.3kg
96mm
Low Vibration version of LRS55
for added operator comfort
and reduced fatigue without
reduction in power. Particularly
recommended for constant use
over extended periods. Also
available with 5 point head.
Standard Pole Scabbler with 9 point
scabbler head, 5 point head available as
an option.
Aeq 4.2m/sec2
ACCESSORIES - POLE SCABBLERS
PART NO.
DESCRIPTION
APPLICATIONS
426.5359
TCT tipped 5 point scabbler
head (pin fit)
Bush hammer style cutter heads are best suited to laitance removal and exposing the
aggregate in concrete. They reduce the likelihood of damage to the aggregate, ensuring that
a stronger bond is created with the next fill or finish layer.
426.5390
TCT tipped 9 point scabbler
head (pin fit)
426.5360
TCT tipped cruciform point
scabbler head (pin fit)
Cruciform headed pistons are suited to the reduction, texturing and roughing of concrete.
These will reduce the aggregate as well as the concrete surface leaving a relatively flat
surface and are also suitable for the removal off epoxy coatings.
TRELAWNY
FLOOR SCABBLER
FLOOR SCABBLERS
The MHS11 Multi-headed Floor Scabbler has 11 scabbling heads
for breaking thick floor coating, producing a keyed profile on
concrete and removing laitance from newly poured concrete.
The MHS11 was designed, in association with senior
construction engineers, for the removal of concrete laitance
while reducing the damage to the substrate. This prevents the
ingress of water which freezes and can cause cracking of the
concrete. Optional cruciform heads are available for material
reduction with a smoother finish.
An optional vacuum shroud is also available for a dust controlled
environment. The 3 point vibration damping system reduces
operator fatigue and provides better operator comfort. The
MHS11 works to within 12mm of walls which reduces the need
for further work close to structures or obstacles. Trelawny’s
unique cutter-head action prolongs tool life and the piston
exhausts into the chamber which reduces wear to moving parts.
159.6000
LOW VIBRATION
MULTI-HEADED
FLOOR SCABBLER
11 SCABBLING HEADS / PNEUMATIC
CUTTING WIDTH
250mm
BLOWS PER MINUTE 11 x 2200
AIR CONSUMPTION 1560L/min 55cfm
cfm
AIR INLET SIZE
3/4”BSP
WEIGHT
WIDTH
285mm
70kg
285mm
For accessories see page I-38
1290mm
340mm
Aeq 4.96m/sec2
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
I-20
Specifications subject to change without notice. E&OE. ©
CHISEL SCALERS
The Trelawny range of Chisel Scalers is extensive. There
is a tool for almost any application requiring removal of
coatings, corrosion or other accumulated materials.
124.2200
24
21
CHISEL SCALERS
Chisel Scalers are also used for brick raking, chipping,
etc while the long reach models are ideal for floor
scraping and cleaning as well as demolition work.
Trelawny Chisel Scalers take a range of 12mm square
shank chisels for brick raking, chipping and splitting
applications. Available as straight, semi-pistol or pistol
grip and a variety of sizes for many uses including weld
dressing, chipping and brick and stone cleaning.
Trelawny chisel scalers are converted to needle scalers in
seconds with the purchase of a needle holder assembly
and are also available in a chisel / needle scaler kit to
cover a wider range of applications with the one tool.
343mm
60mm
2B STRAIGHT CHISEL SCALER
FRONT EXHAUST / TAKES 12MM SQUARE CHISELS
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
3800
114L/min 4cfm
1/4” BSP
2.0kg
50mm
Popular with 704.1106 chisel as a ‘pointing’
tool for mortar removal.
114.1200
114
196.2213
435mm
313mm
1B STRAIGHT CHISEL SCALER
FRONT EXHAUST / TAKES
12MM SQUARE CHISELS
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
VL223 LOW VIBRATION STRAIGHT
CHISEL SCALER
TAKES 12MM SQUARE CHISELS
3800
84L/min 3cfm
1/4” BSP
1.6kg
42mm
Lightweight Chisel Scaler, for single handed
use in hard to reach areas. Also a popular tool
for weld dressing.
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
2400
114L/min 4cfm
1/4” BSP
2.95kg
52mm
Aeq 3.69m/sec2
Low vibration version of 124.2200 chisel
scaler which lowers risk of vibration related
injuries and improves operator control.
TRELAWNY
60mm
50mm
For chisels see page I-23, For Chisel / Needle Scaler Kits see page I-27
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
I-21
CHISEL SCALERS
125.2300
134.3200
CHISEL SCALERS
22
3B SEMI PISTOL GRIP
CHISEL
SEL SCALER
2BPG PISTOL
OL GRIP CHISEL SCALER
FRONT EXHAUSTT / TAKES 12MM SQUARE CHISELS
BLOWS PER MINUTE
NUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
FRONT
NT EXHAUST / TAKES 12MM SQUARE CHISELS
3000
156L/min 5.5cfm
1/4” BSP
2.1kg
45mm
BLOWS PER MINUTE
AIR CONSUMPTION
260mm
AIR INLET SIZE
WEIGHT
170mm
Ideal for the removal of hardened concrete
from plant and machinery. Popular for use
with 704.1106 chisel as a ‘pointing’ tool for
mortar removal.
WIDTH
2200
228L/min 8cfm
1/4” BSP
3.4kg
55mm
426mm
175mm
Used for cleaning of concrete from
plant and machinery.
144.4200
135.3300
4B SEMI PISTOL GRIP
CHISEL SCALER
3BPG PISTOL
ISTOL GRIP CHISEL SCALER
FRONT EXHAUST
HAUST / TAKES 12MM SQUARE CHISELS
FRONT EXHAUST / TAKES 12MM SQUARE CHISELS
BLOWS PER
ER MINUTE
AIR CONSUMPTION
SUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
2200
228L/min 8cfm
1/4” BSP
3.0kg
55mm
BLOWS PER MINUTE
339mm
AIR CONSUMPTION
AIR INLET SIZE
180mm
WEIGHT
WIDTH
Same uses as 134.3200 but lighter in weight
and smaller in overall size.
TRELAWNY
TAKES 12MM SQUARE CHISELS
AIR INLET SIZE
WEIGHT
WIDTH
170mm
196.3203
VL203 LOW VIBRATION PISTOL GRIP
CHISEL SCALER
AIR CONSUMPTION
440mm
Heavy duty scaler used for roughing and chipping
concrete as well as removing marine growth
from vessels and structures under water.
196.2203
BLOWS PER MINUTE
2200
240L/min 8.5cfm
1/4” BSP
4.0kg
65mm
2400
114L/min 4.0cfm
1/4” BSP
3.2kg
52mm
Low vibration version of 125.2300 chisel
scaler. Lowers risk of vibration related
injuries and improves operator control.
VL303 LOW VIBRATION PISTOL GRIP
CHISEL SCALER
395mm
300mm
TAKES 12MM SQUARE CHISELS
170mm
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
Aeq 3.33m/sec2
3000
156L/min 5.5cfm
1/4” BSP
4.25kg
57mm
Low vibration version of 135.3300 which gives
it improved operator control and reduces risk of
vibration related injuries.
185mm
Aeq 3.7m/sec2
For chisels see next page, For Chisel / Needle Scaler Kits see page I-27
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
I-22
Specifications subject to change without notice. E&OE. ©
CHISEL SCALERS
CHISELS FOR TRELAWNY CHISEL SCALERS
23
PART NO.
CHISEL LENGTH
12mm Square
178mm
19mm
Weld spatter removal
12mm Square
178mm
64mm
Wide flat chisel for the removal of peeling paint
and rust
12mm Square
254mm
64mm
Wide flat chisel for the removal of peeling paint
and rust
704.1106
12mm Square
203mm
6mm
Mortar removal for
re-pointing brickwork
704.1107
12mm Square
254mm
19mm
Flat chisel for weld spatter and sand cast
cleaning
12mm Square
178mm
50mm
Spark resistant aluminium bronze
704.1112
12mm Square
178mm
Moil Point
Concrete chipping
704.2105
12mm Square
cranked
178mm
35mm
Weld flux and thick coating removal
704.1101
BLADE WIDTH
APPLICATION
704.31011*
704.1103
704.3103*
704.1105
CHISEL SCALERS
SHANK TYPE
704.3105*
704.3107*
704.1110
704.31110*
TRELAWNY
704.3205*
* Indicates chisels to suit low vibration
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
I-23
NEEDLE SCALERS
NEEDLE SCALERS
NEEDLE SCALERS
24
111.1000
Trelawny pneumatic needle scalers provide
a thorough and effective means of removing
coatings, corrosion and other accumulated
materials. These scalers will work on almost
any surface, especially irregular surfaces that
are otherwise hard to prepare.
Trelawny needle scalers can be converted to
chisel scalers easily with the purchase of a
chisel holder assembly (see Scalers – Chisel
section) and some models can be fitted with
vacuum shrouded front tubes for vacuum
connection and dust control. There is a needle
scaler for every application, from straight to
pistol grip, 12 to 35 needle capacity, standard
and low vibration models.
1B STRAIGHT NEEDLE SCALER
12 NEEDLES / FRONT EXHAUST
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
350mm
3800
12 x 3mm
84L/min 3cfm
1/4” BSP
1.7kg
42mm
50mm
Lightweight needle scaler, able to be used single handed for hard to
reach areas. Used for de-scaling, de-rusting, paint removal, dressing and
stress relieving of welds.Can also be ordered with 29x2mm needles.
121.2000
123.2100
2B STRAIGHT NEEDLE SCALER
2BPG PISTOL
OL GRIP NEEDLE SCALER
19 NEEDLES / FRONT EXHAUST
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
3000
19 x 3mm
156L/min 5.5cfm
1/4” BSP
2.6kg
50mm
19 NEEDLES / FRONT
RONT EXHAUST
380mm
BLOWS PER MINUTE
INUTE
60mm
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
Effective tool for the removal of paint and salt water
corrosion from steel platforms, ships and bridges
leaving a surface ready for repainting or coating.
Can also be ordered with 51 x 2mm needles.
3000
19 x 3mm
156L/min 5.5cfm
1/4” BSP
2.6kg
45mm
340mm
170mm
Same applications as 121.2000. Also suitable
for the removal of hardened concrete from
plant and machinery. Can also be ordered
with 51 x 2mm needles.
196.2103
196.2003
TRELAWNY
NEEDLE QTY
Fall arrester available see page I-26
Fall arrester available see page I-26
VL223 LOW VIBRATION
STRAIGHT NEEDLE SCALER
VL203 LOW VIBRATION
BRATION
PISTOL GRIP NEEDLE SCALER
19 NEEDLES / FRONTT EXHAUST
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
2400
19 x 3mm
114L/min 4cfm
1/4” BSP
2.7kg
52mm
Low vibration version of 123.2100 to improve
operator control and lower risk of vibration
related injuries.
19 NEEDLES / FRONT EXHAUST
395mm
BLOWS PER MINUTE
170mm
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
Aeq 2.75m/sec2
2400
19 x 3mm
114L/min 4cfm
1/4” BSP
2.35kg
52mm
Low vibration version of 121.2000 with lower
risk of vibration related injuries and improved
operator control.
435mm
60mm
Aeq 2.56m/sec2
For needles see page I-26, For Chisel / Needle Scaler Kits see page I-27
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
I-24
Specifications subject to change without notice. E&OE. ©
NEEDLE SCALERS
131.3000
133.3100
25
340mm
175mm
180mm
3B SEMI PISTOL GRIP NEEDLE SCALER
3BPG PISTOL GRIP NEEDLE SCALER
28 NEEDLES / FRONT EXHAUST
28 NEEDLES / FRONT EXHAUST
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
2200
28 x 3mm
228L/min 8cfm
1/4” BSP
4.5kg
55mm
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
This is the original Trelawny needle scaler and has
been used for over 50 years for a wide range of
surface preparation tasks in construction, marine
and petro-chemical industries as well as cleaning
concrete from plant and equipment and producing
decorative finishes on concrete. Can also be ordered
with 65 x 2mm needles or 19 x 4mm needles.
NEEDLE SCALERS
470mm
2200
28 x 3mm
228L/min 8cfm
1/4” BSP
3.8kg
55mm
Used for heavy rust and scale removal from steel
structures and stippling of plain concrete for keying
and decorative finishes. Can also be ordered with
65 x 2mm needles or 19 x 4mm needles.
196.3003
141.3100
Fall arrester available see page I-26
340mm
475mm
170mm
180mm
35 NEEDLES / FRONT EXHAUST
28 NEEDLES / FRONT EXHAUST
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
3000
28 x 3mm
156L/min 5.5cfm
1/4” BSP
3.51kg
57mm
Low vibration version of 133.3100 which improves operator
control and lowers risk of vibration related injuries.
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
Aeq 2.3m/sec2
AIR INLET SIZE
WEIGHT
WIDTH
2200
35 x 4mm
240L/min 8.5cfm
1/4” BSP
5.9kg
65mm
Heaviest duty needle scaler in the range, the 4B is made
for the toughest of applications such as roughing and
dressing concrete and aggregate exposure as well as
removing the hardest scale and corrosion. Also used for
removing marine growth from vessels and underwater
structures. Can also be ordered with 49 x 3mm needles.
TRELAWNY
4B SEMI PISTOL GRIP NEEDLE SCALER
VL303 LOW VIBRATION
PISTOL GRIP NEEDLE SCALER
For needles see next page. For Chisel / Needle Scaler Kits see page I-27, A selection of Trelawny Needle Scalers can be fitted with an optional
vacuum shroud for a dust reduced working environment, see page I-26.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
I-25
NEEDLE SCALER ACCESSORIES
ACCESSORIES
26
TRELAWNY
NEEDLE SCALERS
NEEDLES
I-26
Flat Tip
Chisel Tip
Pointed Tip
Quantity of each type of needle for each model of trelawny needle scaler:
NEEDLE SCALER
2mm
FLAT TIP
3mm
FLAT TIP
3mm
CHISEL TIP
3mm
POINTED TIP
3mm
FLAT TIP
BERYLLIUM
COPPER
3mm FLAT TIP
STAINLESS
STEEL
4mm
FLAT TIP
4mm
CHISEL TIP
1B
C6000-2FTC
X 24
C6000- 3FTC
X 12
C6000- 3CTC
X 12
C6000- 3PTC
X 12
C6000 - 3FTB
X 12
C6000- 3FTS
X 12
N/A
N/A
2B & 2BPG
C6000-2FTC
X 51
C6000-3FTC
X 19
C6000-3CTC
X 19
C6000-3PTC
X 19
C6000-3FTB
X 19
C6000- 3FTS
X 19
N/A
N/A
3B & 3BPG
C6000-2FTC
X 65
C6000-3FTC
X 28
C6000-3CTC
X 28
C6000-3PTC
X 28
C6000-3FTB
X 28
C6000- 3FTS
X 28
C6000- 4FTC
X 19
C6000- 4CTC
X 19
4B
N/A
C6000-3FTC
X 49
C6000-3CTC
X 49
C6000-3PTC
X 49
C6000-3FTB
X 49
C6000- 3FTS
X 49
C6000- 4FTC
X 35
C6000- 4CTC
X 35
VL203
N/A
C6000-3FTC
X 19
C6000-3CTC
X 19
C6000-3PTC
X 19
C6000-3FTBS
X 19
C6000- 3FTS
X 19
N/A
N/A
VL223
N/A
C6000-3FTC
X 19
C6000-3CTC
X 19
C6000-3PTC
X 19
C6000-3FTB
X 19
C6000- 3FTS
X 19
N/A
N/A
VL303
N/A
C60000-3FTC
X 28
C6000-3CTC
X 28
C6000-3PTC
X 28
C6000-3FTB
X 28
C6000- 3FTS
X 28
N/A
N/A
FALL ARRESTORS
VACUUM SHROUDS
Fall arrestors are a new product for use on Trelawny low
vibration needle and chisel scalers to help prevent potential
OH&S risks and avoid losing and damaging tools. Ideal
for working on scaffolds, bridge maintenance, offshore
platforms and rigs, ships and marine vessels and all
applications at heights.
Used with Trelawny air powered drum top vacuum units –
see page I-39.
720.3003 - VL303 fall arrestor
720.2003 - VL223 & VL203 fall arrestor
Specifications subject to change without notice. E&OE. ©
418.2199 – 2B & 2BPG vacuum shroud
418.3039 – 3BPG vacuum shroud
NEEDLE / CHISEL SCALER KITS
NEEDLE / CHISEL
SCALER KITS
27
1B STRAIGHT NEEDLE /
CHISEL SCALER KIT
3MM NEEDLES / 12MM SQUARE
CHISELS / FRONT EXHAUST
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
This means that the same tool can be
used for a greater variety of applications
and saves purchasing 2 tools. They come
in a sturdy toolbox to protect the tool and
keep all of the accessories together.
AIR INLET SIZE
WEIGHT
WIDTH
122.2100
2BPG PISTOL GRIP
NEEDLE / CHISEL
SCALER KIT
2B STRAIGHT NEEDLE /
CHISEL SCALER KIT
3MM NEEDLES / 12MM SQUARE
CHISELS / FRONT EXHAUST
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
3800
12 x 3mm
84L/min 3cfm
1/4” BSP
1.7kg
42mm
Kit includes a 1B straight needle scaler,
components to change to chisel scaler, 2 spare
sets of needles, 3 chisels and a roll of air hose,
all in a heavy duty plastic toolbox.
120.2000
BLOWS PER MINUTE
NEEDLE / CHISEL SCALER KITS
Trelawny Needle / Chisel Scaler kits are
a kit every tradesman in the flooring,
rendering, concrete and refurbishing
trades should have. The kits contain a
scaling tool, needle holder assembly to
use the tool as a needle scaler, chisel
holder assembly to convert the tool to a
chisel scaler, selection of spare needles
and chisels and a roll of air hose.
110.1000
3MM NEEDLES / 12MM
SQUARE CHISELS / FRONT
EXHAUST
BLOWS PER MINUTE
3000
19 x 3mm
156L/min 5.5cfm
1/4” BSP
2.6kg
50mm
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
Kit includes a 2B straight needle scaler, components
to change to chisel scaler, 2 spare sets of needles,
3 chisels and a roll of air hose all in a heavy duty
plastic box.
3000
19 x 3mm
156L/min 5.5cfm
1/4” BSP
2.6kg
45mm
Kit includes a 2BPG pistol grip needle scaler,
components to change to chisel scaler, 2 spare sets
of needles, 3 chisels and a roll of air hose, all in a
heavy duty plastic toolbox.
130.3000
132.3100
3BPG PISTOL GRIP
NEEDLE / CHISEL
SCALER KIT
3MM NEEDLES / 12MM SQUARE
CHISELS / FRONT EXHAUST
3MM NEEDLES / 12MM SQUARE
CHISELS / FRONT EXHAUST
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
2200
28 x 3mm
228L/min 8cfm
1/4” BSP
4.5kg
55mm
Kit includes a 3B semi pistol grip needle scaler,
components to change to chisel scaler, 2 spare
sets of needles, 3 chisels and a roll of air hose, all
in a heavy duty plastic toolbox.
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
470mm
AIR INLET SIZE
WEIGHT
175mm
WIDTH
2200
28 x 3mm
228L/min 8cfm
1/4” BSP
3.8kg
55mm
340mm
180mm
Kit includes a 3BPG pistol grip needle scaler,
components to change to chisel scaler, 2 spare
sets of needles, 3 chisels and a roll of air hose,
all in a heavy duty plastic toolbox.
TRELAWNY
3B SEMI PISTOL GRIP
NEEDLE / CHISEL
SCALER KIT
For full range of chisels see page I-23
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
I-27
NEEDLE / CHISEL SCALER KITS
140.4000
196.3103
3103
NEEDLE / CHISEL SCALER KITS
28
VL303 LOW VIBRATION PISTOL GRIP
NEEDLE / CHISEL SCALER KIT
4B SEMI PISTOL GRIP NEEDLE /
CHISEL SCALER KIT
4MM NEEDLES / 12MM SQUARE
CHISELS / FRONT EXHAUST
3MM NEEDLES / 12MM SQUARE
CHISELS / FRONT EXHAUST
475mm
180mm
170mm
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
BLOWS PER MINUTE
2200
35 x 4mm
240L/min 8.5cfm
1/4” BSP
5.9kg
65mm
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
Kit includes a 4B semi pistol grip needle scaler,
components to change to chisel scaler, 2 spare sets
of needles, 3 chisels and a roll of air hose, all in a
heavy duty plastic toolbox
3000
28 x 3mm
156L/min 5.5cfm
1/4” BSP
3.51kg
57mm
Included in kit is a VL303 low vibration pistol grip
needle scaler, components to change to chisel
scaler, 2 spare sets of needles, 3 chisels and a roll of
air hose, all in a heavy duty plastic toolbox.
196.2250
TRELAWNY
340mm
196.2255
VL223 / VL203 LOW VIBRATION
NEEDLE / CHISEL SCALER KIT
1B / VL203 CHISEL
SCALER KIT
3MM NEEDLES / 12MM SQUARE
CHISELS / FRONT EXHAUST
TAKES 12MM SQUARE CHISELS /
FRONT EXHAUST
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
Chisel Scaler
Aeq 3.7m/sec2
Needle Scaler
Aeq 2.3m/sec2
2400
19 X 3mm
114L/min 4cfm
1/4” BSP
2.95kg (VL223 chisel scaler)
3.2kg (VL203 chisel scaler)
52mm
Included in kit is a VL203 chisel scaler, components to
convert to a needle scaler and components to convert to
a VL223 chisel and needle scaler, set of needles and 2
chisels, all in a heavy duty plastic carry case.
BLOWS PER MINUTE
VL203
Chisel Scaler Aeq
3.33m/sec2
Needle Scaler
Aeq 2.75m/sec2
VL223
Chisel Scaler Aeq
3.69m/sec2
Needle Scaler
Aeq 2.56m/sec2
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
3800(1B) 2400(VL203)
84L/min 3cfm (1B)
114L/min 4cfm (VL203)
1/4” BSP
1.6kg (1B) 3.2kg (VL203)
42mm (1B) 52mm (VL203)
VL203
Chisel Scaler Aeq
3.33m/sec2
Included in kit is a 1B straight chisel scaler, VL203
low vibration pistol grip chisel scaler and 3 chisels ,
all in a heavy duty plastic carry case.
For full range of chisels see page I-23
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
I-28
Specifications subject to change without notice. E&OE. ©
SCALING HAMMERS
SCALING HAMMERS
151.5100 / 151.5105
05
29
Applications include removal of
stubborn coatings and mastic
residues from steel floors. Also,
cleaning of cast iron pipes, steel pipes
and bell joints of gas lines, etc.
The main industries that use these
scaling hammers are machine
refurbishers, gas and other companies
involved in the maintenance of steel
pipes and marine, ship and offshore
plant maintenance.
SCALING HAMMERS
Trelawny Scaling Hammers are
available in single and triple head
versions for the removal of rust,
coatings and scale from steel
structures and surfaces.
G
SINGLE HEAD SCALING
HAMMER
PNEUMATIC
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
3000
198L/min 7cfm
3/8” NPT
2.5kg
55mm
460mm
150mm
Single head scalers are for use in confined
spaces and on smaller surface areas.
Models:
151.5100 - Cruciform head
151.5105 - Bush hammer head
196.5095 / 196.5105
153.5300 / 153.5305
5
TRIPLE HEAD
SCALING HAMMER
PNEUMATIC / SUPPLIED WITH
OPTIONAL SIDE HANDLE
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
m
160
3 x 2400
425L/min 15cfm
3/8” NPT
5.2kg
280mm with side handle
170mm without side handle
155mm
460mm
m
465
Triple head scalers are the largest of the hand scalers
and have similar applications to the single scalers but
are ideal for larger surface areas.
Models: 153.5300 - Cruciform heads
153.5305 - Bush hammer heads
mm
153.6170 / 153.6175
LOW VIBRATION TRIPLE HEAD
SCALING HAMMER
PNEUMATIC
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
PNEUMATIC / SUPPLIED WITH
OPTIONAL SIDE HANDLE
3000
198L/min 7cfm
3/8” NPT
2.4kg
55mm
Vibration reduced version of 151.5100 for added
operator comfort and reduced operator fatigue.
Models:
196.5095 - Cruciform head
196.5105 - Bush hammer head
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
VL203
Chisel Scaler Aeq
3.7m/sec2
460mm
1
155mm
3 X 3000
425L/min 15cfm
3/8”NPT
5.4kg
280mm
Low vibration version of 153.5300 for added operator
comfort and reduced operator fatigue.
Models: 153.6170 – Cruciform heads
153.6175 – Bush hammer heads
VL203
Chisel Scaler Aeq
4.7m/sec2
TRELAWNY
LOW VIBRATION SINGLE HEAD
SCALING HAMMER
All Trelawny Scaling Hammers can be fitted with an optional vacuum shroud for a dust reduced working environment.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
I-29
SCALING HAMMER ACCESSORIES
SCALING HAMMER ACCESSORIES
PART NO.
I-30
DESCRIPTION
APPLICATION
426.5352
Cutter Head (standard duty) – TCT Bush Hammer
Detachable taper fit head. For breaking up epoxy coatings.
426.5351
Cutter Head (standard duty) – TCT Cruciform
Detachable taper fit head. For use in scaling hammers on
steel surfaces for the removal of thick coatings, heavy rust
and scale.
606.5303
Cutter Head (standard duty) – Beryllium Cruciform
Detachable taper fit head. For use in scaling hammers on
steel surfaces for the removal of thick coatings, heavy rust
and scale. Reduces risk in potentially explosive areas.
TRELAWNY
SCALING HAMMER ACCESSORIES
30
Specifications subject to change without notice. E&OE. ©
LONG REACH SCRAPERS & SCALERS
136.3698S
Trelawny Long Reach Scalers are specifically
designed to reduce the risk of back strain and
to extend their use into previously inaccessible
areas. Available in 60cm (2ft), 120cm (4ft),
150cm (5ft) and 180cm (6ft) lengths.
31
‘LITE’ LONG REACH SCRAPER
LIGHTWEIGHT MODELS / AVAILABLE IN 3 LENGTHS /
16MM SHANK BLADE HOLDER
These tools are ideal for a range of industries
from construction, marine and petro-chemical
to general factory maintenance and flooring
services. A wide range of tools and accessories
are available for the long reach scalers
including needle scaling attachments; 100, 200
& 300mm scraper blades and a full range of
standard 5/8” hexagon shank chisels.
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
2200
126L/min 4.5cfm
3/8” BSP
120cm - 3.8kg
150cm - 4.2kg
180cm - 4.6kg
Models:
136.3498S - 120cm long
136.3598S - 150cm long
136.3698S - 180cm long
Another advantage of Long Reach Scalers is
that they only use 126L/min of air which can be
run off a portable compressor.
136.3600S
136
13
6.3600S
LONG REACH SCRAPERS & SCALERS
The Long Reach ‘Lite’ range are lighter in
weight than standard Long Reach Scalers.
This is a particular advantage in vertical
applications. Applications include the removal
of floor tiles, residues, chemical spillages, ice,
roofing materials, metal slag, glues, paints,
plaster, render, weld dressing, rail track and
infrastructure maintenance, cleaning of boilers
and ovens, etc.
Can be used with 16mm shank chisels as well as
scraper blades.
137.3500C
137.3698
7.36
3698
98
ACH
‘LITE’ LONG REACH
NEEDLE SCALER
LONG REACH CHISEL SCALER
AVAILABLE IN 4 LENGTHS / 16MM SHANK
BLADE HOLDER
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
2200
126L/min 4.5cfm
3/8” BSP
60cm - 4.5kg
120cm - 5.7kg
150cm - 6.3kg
180cm - 6.9kg
MODELS:
136.3200S - 60cm long
136.3400S - 120cm long
136.3500S - 150cm long
136.3600S - 180cm long
Can be used with 16mm shank
chisels as well as scraper blades.
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
STANDARD
WEIGHT
LITE
2200
126L/min 4.5cfm
3/8” BSP
60cm - 4.4kg
120cm - 5.6kg
150cm - 6.2kg
180cm - 6.8kg
120cm - 3.7kg
150cm - 4.1kg
180cm - 4.5kg
STANDARD
MODELS:
LITE
MODELS:
137.3200C (60cm)
137.3400C (120cm)
137.3500C (150cm)
137.3600C (180cm)
136.3498C (120cm)
136.3598C (150cm)
136.3698C (180cm)
BLOWS PER MINUTE
NEEDLE QTY
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
STANDARD
WEIGHT
LITE
STANDARD
MODELS:
137.3200 (60cm)
137.3400 (120cm)
137.3500 (150cm)
137.3600 (180cm)
2200
28 x 3mm
126L/min 4.5cfm
3/8” BSP
60cm - 4.8kg
120cm - 6.0kg
150cm - 6.6kg
180cm - 7.2kg
120cm - 4.1kg
150cm - 4.5kg
180cm - 4.9kg
LITE
MODELS:
137.3498 (120cm)
137.3598 (150cm)
137.3698 (180cm)
TRELAWNY
LONG REACH SCRAPER
AVAILABLE IN 4 LENGTHS / TAKES 16mm
SHANK CHISELS / STANDARD AND
LIGHTWEIGHT MODELS
LIGHTWEIGHT AND STANDARD MODELS
AVAILABLE IN 4 LENGTHS / 28 NEEDLES
Can also be ordered with 65 x 2mm or
19 x 4mm needles.
For Scraper Blades see page I-32, For chisels see page I-33
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
I-31
LONG REACH SCRAPERS & SCALERS
ACCESSORIES - FOR LONG REACH SCRAPERS
32
LONG REACH SCRAPERS & SCALERS
SCRAPER BLADES WITH 5/8" HEX. SHANK HOLDERS
BLADE WIDTH
102mm
BLADE EDGE
Square
APPLICATION
Removal of paint and
adhesive build-up.
BLADE ASSEMBLY
PART NO
1 Blade
1 Holder
431.3504
BLADE PACK
PART NO
10 Blades
439.3504
Holder Only
641.3512
203mm
Square
Removal of paint and
coating spillage.
1 Blade
1 Holder
431.3508
10 Blades
439.3508
Holder Only
641.3512
305mm
Square
Carpet and tile removal.
1 Blade
1 Holder
431.3512
10 Blades
439.3512
Holder Only
641.3512
102mm
Bevelled
Stubborn adhesive material.
1 Blade
1 Holder
431.3904
10 Blades
439.3524
Holder Only
641.3512
TRELAWNY
203mm
I-32
Bevelled
Carpet and tile removal.
1 Blade
1 Holder
431.3908
10 Blades
439.3528
Holder Only
641.3512
305mm
Bevelled
Adhesive removal.
1 Blade
1 Holder
431.3912
10 Blades
439.3522
Holder Only
641.3512
Specifications subject to change without notice. E&OE. ©
LONG REACH SCRAPERS & SCALERS
ACCESSORIES FOR LONG REACH CHISEL SCALERS
33
SCRAPER CHISELS WITH 5/8" HEX. SHANK
705.1100
229mm
50mm
Spark resistant aluminium bronze for use in hazardous areas.
705.1101
229mm
25mm
Flat chisel for sand cast chipping.
705.1102
203mm
100mm
Asphalt cutter
705.1106
229mm
50mm
Removal of linoleum from floors.
705.1112
203mm
100mm
Spark resistant aluminium bronze for use in hazardous areas.
705.2100
280mm
35mm
Ceramic tile removal, flux chipper.
705.2102
203mm
100mm
Floor tile removal.
708.1100
203mm
Comb
Holder
For use with comb insert.
708.1101
25mm
38mm
Comb Insert
Brick cleaning and reclamation.
BLADE WIDTH
APPLICATION
Specifications subject to change without notice. E&OE. ©
TRELAWNY
CHISEL
LENGTH
LONG REACH SCRAPERS & SCALERS
PART NO.
I-33
LONG REACH BREAKER
157.5500
LONG REACH BREAKER
34
‘STRONGA’ LONG REACH BREAKER
7/8” HEX SHANK CHISELS / VIBRATION ISOLATED HANDLE
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
2000
564L/min 20cfm
1/2” BSP
12.3kg
1480mm
The ‘Stronga’ long reach breaker is a heavy
duty long reach breaker with a vibration
isolated handle for operator comfort.
Applications include concrete reduction,
removal of tough ceramic tiles, removal of
thin set mortars and crack chasing with
reduced damage to concrete substrates.
ACCESSORIES FOR 'STRONGA' LONG REACH BREAKER
TRELAWNY
CHISELS WITH 7/8" (22MM) HEX. SHANKS
PART NO.
SHANK TYPE
CHISEL LENGTH
BLADE WIDTH
705.9060
Hex Straight
360mm
25mm (1”)
705.9080
Hex Straight
360mm
50mm (2”)
705.9100
Hex Straight
360mm
75mm (3”)
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
I-34
Specifications subject to change without notice. E&OE. ©
DECK SCALER
DECK SCALER
The Trelawny SF11 Multi-headed Deck Scaler is
for use on steel deck and floor surfaces and is
ideally suited for thick coating removal and surface
preparation on large areas of deck and tank floor
cleaning, complimenting the hand held Scaling
Hammer range. Eleven heads impacting at 3000
blows per minute break down the hardest of coatings.
35
DECK SCALER
Applications include breaking down hard coatings
prior to floor blast cleaning (reduces cost of spent
blast media), marine industry (for removing rust, scale
and paint from ship decks) and chemical industry
(de-scaling the bottom of tanks).
The multi-position handle allows easy transportation
and access under obstructions and the low vibration
of 5.76m/s² reduces the risk of vibration related
injuries and reduces operator fatigue. A model with a
durable light weight vacuum shroud is available where
control of dust is necessary.
159.5910
TRELAWNY
MULTI-HEADED DECK SCALER
11 SCALING HEADS / PNEUMATIC
1284mm
BLOWS PER MINUTE
CUTTING WIDTH
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
11 x 3000
252mm
1982L/min 70cfm
3/4” BSP
36kg
282mm
295mm
Also Available:
SF-11 with dust shroud
Order 159.5925
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
I-35
DECK SCALER
DECK SCALER ACCESSORIES
36
DECK SCALER
CUTTER HEADS FOR 159.5910 SF-11 MULTI-HEADED DECK SCALER
CUTTER HEADS
PART NO.
DESCRIPTION
426.5352
Bush hammer taper fit cutter head
426.5351
Cruciform taper fit cutter head
606.5303
Beryllium copper cruciform taper fit cutter head – for potentially hazardous areas
612.5301
Piston to fit the above cutter heads
DECK SCALER ACCESSORIES
VACUUM SKIRT FOR SF11
The SF11 multi-headed deck scaler can be fitted
with a Vacuum Skirt & Hose for control of nuisance
and hazardous dust. Can be used in conjunction
with Trelawny Pneumatic Vacuum units illustrated
on page 177.
TRELAWNY
SF11 VACUUM SKIRT - ORDER 437.0110
Vacuum Skirt
Vacuum Hose
I-36
Specifications subject to change without notice. E&OE. ©
FLOOR SCABBLERS
MHS5
The MHS5 is designed for fast concrete
removal and for a rough finish. This
makes it the ideal tool for texturing bridge
decks for sealants, roughening surfaces
to create anti-slip floors and new overlays
and for reducing high spots. The MHS5
is more of a demolition tool than the
MHS11, its 5 heads operating at 1200bpm
to remove concrete fast. The vacuum
port is standard with this machine,
ready to connect to a vacuum system
for a dust free working environment
and the automatic in-line oiler reduces
maintenance time and cost. Available with
5 point or 9 point bush hammer heads.
MHS11
159.5050
37
MHS5 LOW VIBRATION
ON FIVE HEAD
FLOOR SCABBLER
5 SCABBLING HEADS / PNEUMATIC
MATIC / ADJUSTABLE HEIGHT /
IN-BUILT VACUUM PORT / AUTOMATIC
TOMATIC IN-LINE OILER
1000mm
CUT TING WIDTH
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
300mm
mm
5 x 1200
3681L/min
1L/min 130cfm
¾”BSP
SP
117kg
kg
740mm
mm
1070mm
1
FLOOR SCABBLERS
Trelawny floor scabblers are for scabbling
large concrete floor areas for applications
such as concrete reduction, laitance
removal, removing coatings and paints
for resurfacing, surface preparation for
coatings, waterproofing and resurfacing
and for levelling uneven joints. There are
2 models of Trelawny floor scabblers,
MHS5 with 5 scabbling heads and MHS11
with 11 scabbling heads.
159.6000
The MHS11 has 11 scabbling heads for
breaking thick floor coating, producing a
keyed profile on concrete and removing
laitance from newly poured concrete.
285mm
MHS11 LOW VIBRATION
ELEVEN HEAD
FLOOR SCABBLER
1290mm
340mm
11 SCABBLING HEADS / PNEUMATIC
CUTTING WIDTH
BLOWS PER MINUTE
AIR CONSUMPTION
AIR INLET SIZE
WEIGHT
WIDTH
250mm
11 x 2200
1560L/min 55cfm
3/4”BSP
70kg
285mm
TRELAWNY
The MHS11 was designed in association
with senior construction engineers for
the removal of concrete laitance while
reducing damage to the substrate. This
prevents the ingress of water which
can freeze and cause cracking of the
concrete. Optional cruciform heads
are available for material reduction
with a smoother finish. An optional
vacuum shroud is also available for a
dust reduced environment. The 3 point
vibration damping system reduces
operator fatigue and provides better
operator comfort. The MHS11 works to
within 12mm of walls which reduces the
need for further work close to structures
or obstacles. Trelawny’s unique cutterhead action prolongs tool life and the
piston exhausts into the chamber which
reduces wear to moving parts.
Aeq 4.96m/sec2
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
I-37
MULTI-HEADED FLOOR SCABBLER
FLOOR SCABBLER ACCESSORIES
38
TRELAWNY
MULTI-HEADED FLOOR SCABBLER
CUTTER HEADS FOR MHS5
I-38
PART NO.
DESCRIPTION
APPLICATION
426.5051
5 point bush hammer scabbler head
-Laitance removal from large floor areas
-Roughening concrete prior to resurfacing
-Bridge deck preparation for waterproofing
426.5369
9 point bush hammer scabbler head
- Levelling uneven joints
-Creating good bond profile for epoxies, urethanes or thin overlays
FLOOR SCABBLER ACCESSORIES
CUTTER HEADS FOR MHS11
PART NO.
DESCRIPTION
612.0125
One piece piston tungsten carbide
tipped bush hammer head
426.5355
Replaceable cutter head, tungsten
carbide tipped bush hammer
426.5358
Replaceable cutter head, tungsten
carbide tipped cruciform head
612.0120
Piston to fit replaceable head
FLOOR SCABBLER ACCESSORIES
VACUUM SKIRT FOR MHS11
MHS5 comes standard with bult-in vacuum port.
A vacuum skirt is available for MHS11 as an
accessory - order 437.0120
MHS11 can be operated in conjunction with the
Trelawny Pneumatic vacuum Units illustrated on
page 177.
Specifications subject to change without notice. E&OE. ©
APPLICATION
-Laitance removal from large floor areas
-Roughening concrete prior to resurfacing
-Bridge deck preparation for waterproofing
-Levelling floors
-Reducing concrete
-Removal of floor paints and coatings
VACUUM SYSTEMS
TRELAWNY TOOL AND VACUUM
SYSTEM (TVS™)
303.10KAV30/D
/D
39
VACUUM SYSTEMS
The Trelawny TVS™ System enables the collection of dry
dust and debris or the recovery of non flammable liquids
from the surface preparation tool or machine so as to
provide a safe and clean working environment.
To provide the necessary dust extraction facilitation, a range
of robust and powerful vacuum units are available in both
wet & dry version.
The available vacuum units are illustrated in the following
sections and include the following features:
•
Double filtration.
•
Robust stainless steel construction.
•
Floor tool kit included for general cleaning work.
•
Disposable paper filter or re-usable cloth bag.
•
Optional HEPA filter for the collection of
hazardous dust.
•
Fully earthed with anti-static vacuum and air
supply hoses.
KAV30 PNEUMATIC
DRY VACUUM UNIT
RECOVERY CAPACITY
AIR CONSUMPTION
OUTPUT FLOW
WEIGHT
30L
960L/min 35cfm
7980L/Min 70cfm
14.5kg
Standard Equipment
- 38mm antistatic tool kit
- Standard antistatic cloth filter
- 10 x K6 paper filters
Note: The user must ensure a good earth
connection at the air connection point.
303.10KAV30/WD
WD
303.10KA/DT
205 Litre drum not included.
RECOVERY CAPACITY
AIR CONSUMPTION
OUTPUT FLOW
RECOVERY CAPACITY
AIR CONSUMPTION
OUTPUT FLOW
WEIGHT
30L
960L/Min 35
35cfm
f
1980L/Min 70cfm
14.5kg
Standard Equipment
- Antistatic float assembly
- Standard antistatic cloth filter
- Antistatic 38mm tool kit
- 10 x K6 paper filters
Note: The user must ensure a good earth
connection at the air connection point.
MA X. VACUUM AT 100 PSI
WEIGHT
Up to 205L
97L/Min 35cfm
1980L/Min 70cfm
2500mmH2 O
15.9kg
Ideal for the bulk collection of dust, debris and non-flammable liquid from
tool and machine work faces, factory areas, job sites, ships decks and oil
& gas platforms. Robust components and versatile mounting system to suit
drums with rims ranging from 200mm to 600mm in diameter.
FEATURES:
- Waste can be bagged
- Modular design to suit various applications
- Optional float assembly for wet use
- Optional HEPA filter for hazardous dust
- Will mount on oil drums or cannisters
TRELAWNY
KAV30/WD
PNEUMATIC WET &
DRY VACUUM UNIT
KA/DT
DRUM TOP PNEUMATIC
VACUUM KIT
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
I-39
VACUUM SYSTEMS
ACCESSORIES FOR STANDARD PNEUMATIC VACUUM UNITS
40
TRELAWNY
VACUUM SYSTEMS
ACCESSORY
PART NUMBER
303.1060
HEPA* filter (optional)
303.1025/AS
14” antistatic standard filter assembly (for dry use with paper filter or paper bag)
303.1035
14” permaflow filter (optional – secondary filtration)
303.1050/AS
14” float assembly – wet use
303.1075/AS
38mm x 3 metre antistatic hose
303.1085/AS
38mm antistatic dry tool kit
303.1095/AS
38mm antistatic wet tool kit
303.1100
38mm multi purpose tool with brushes
303.1105/AS
38mm x 125mm dusting brush
303.1110
38mm stainless steel double taper tube for joining hoses
303.1005
K4 disposable bags – pack of 10 – for disposing of sealed waste such as hazardous dust
303.1030
K6 paper filter – pack of 10 – for dry use applications
*HEPA filter = High Efficiency Particulate Air - filter for collection of hazardous dust.
I-40
Specifications subject to change without notice. E&OE. ©
DESCRIPTION
VACUUM SYSTEMS
COMPONENTS OF DRUM TOP PNEUMATIC VACUUM UNIT
41
COMPONENT
PART NUMBER
DESCRIPTION
Motor Head
303.1025/AS
Standard filter
303.1050/AS
Float assembly for wet use
303.0014A
Drum top adaptor
303.1095/WD
Wet & dry tool kit
VACUUM SYSTEMS
303.10KA
ACCESSORIES FOR DRUM TOP PNEUMATIC VACUUM UNIT
ACCESSORY
PART NUMBER
DESCRIPTION
HEPA* filter
303.1035
14” permaflow filter
303.1105/AS
38mm x 125mm dusting brush
TRELAWNY
303.1060
Specifications subject to change without notice. E&OE. ©
I-41
TRIDENT NEPTUNE DECK SCALER
TRELAWNY TRIDENT NEPTUNE
TRIDENT NEPTUNE DECK SCALER
42
340.490/S
S
The Trident Neptune Deck Scaler is primarily
designed for de-scaling on board ships and
marine equipment. Driven by a powerful air motor
this machine will rapidly remove scale, rust, paint
and other unwanted deposits, leaving a good
surface suitable for priming, painting or coating
applications. It will reach difficult to access areas
on both horizontal and vertical steel surfaces
such as under piping and around many deck
obstructions where other de-scaling machines
cannot reach.
The Trident Neptune Deck Scaler has the
advantage of being 25% lighter than other similar
machines and the skid design base prevents the
machine from moving around on a rolling ship deck.
Available with a range of scaling heads and wire
brushes for many applications.
TRIDENT NEPTUNE
NE DECK SCALER
PNEUMATIC
CUTTING WIDTH
CUTTER SPEED
MOTOR POWER
SHAFT LENGTH
AIR CONSUMPTION
WEIGHT
17mm
3000rpm
1.1kW 1.5HP
2700mm
1936L/min 68cfm
29kg
TRIDENT NEPTUNE DECK SCALER ACCESSORIES
TRELAWNY
PART NO.
DESCRIPTION
APPLICATION
340.581
Six cutter scaling head
These are the most aggressive, designed for the rapid removal of very heavy rust
& scale and are also suitable for the rapid removal of 2 part epoxy paint
340.550
Heavy duty scaling head with
chipping leaves
Fitted as standard. Designed for the rapid removal of very heavy rust & scale.
Less aggressive than cutter wheels and should provide a surface finish suitable
for coating with modern paint systems.
340.160
6” power brush
These are the least aggressive. Generally used for the removal of light rust and
paint, or for final finishing to provide a surface suitable for painting.
340.163
6” twisted knot brush
340.166
Crimped wire cup brush
340.167
Twisted knot cup brush
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
I-42
Specifications subject to change without notice. E&OE. ©
HYDRAFLEX
YDRAF
TRELAWNY HYDRAFLEX
342.HY50
43
HYDRAFLEX
The Hydraflex is specifically designed
for hold cleaning on bulk carriers and
cargo vessels of all sizes. This simple
mechanism uses a combination of water
and compressed air which results in a
very powerful, tightly compressed jet
of water able to reach up to 30 metres.
This ensures that cleaning time is kept
to a minimum without the need for
any additional equipment and is easy
to set up and operate. The one man
operation can clean residue, flaking
rust, loose paints and other substances
from a ship’s hold. The Hydraflex is
manufactured from high quality non
corrosive stainless steel which ensures a
long life with a minimum of maintenance.
HYDRAFLEX
X
HIGH QUALITY STAINLESS
TAINLESS STEEL – ADJUSTABLE
ADJUSTAB AIR
PRESSURE CONTROL
ROL VALVE
EFFECTIVE JET RE ACH
WATER CONSUMPTION
WATER PRESSURE
AIR CONSUMPTION
AIR PRESSURE
RECOIL
WATER HOSE I.D. REQD
AIR HOSE I.D. REQD
WEIGHT
30m
454L/min
5.85BAR 85Psi
1980L/min 70cfm
6.9BAR 100Psi
10 – 18kg
50mm 2”
19mm ¾”
14.1kg
TRELAWNY
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
I-43
TRELAWNY
44
I-44
Specifications subject to change without notice. E&OE. ©
SECTION J
CHAIN SAWS
PAVEMENT BREAKERS
CHIPPING HAMMERS
PICK HAMMER
1
STONE WORKING
HAMMERS
ROCK DRILLS
PUMP
CONCRETE VIBRATORS
PNEUTECH
CONSTRUCTION
TOOLS
•
The PNEUTECH range of pneumatic construction tools
offers a wide choice of products for building and civil
engineering projects.
•
The main characteristics of Pneutech tools are
simplicity, durability, high productivity, and reduced air
consumption.
•
Pneutech tools are distributed Australia wide, have full
spare parts back-up and are supported by a network of
Service Agents.
CONTENTS - PNEUTECH
TOOLS
CONTENTS
2
PAGE
Chain Saws
3
Pavement Brakers
Standard
4
Pavement Brakers
Low Vibration
5
Chipping Hammers
6
Pick Hammers
6
Stone Hammers
7
Rivet Busters
8
Rock Drills
Pump
8
Centrifugal
PNEUTECH
Concrete Vibrators
J-2
Specifications subject to change without notice. E&OE. ©
9
9
CHAIN SAWS
PT-1237A
A
3
CHAIN SAWS
HEAVY DUTY
Y 17INCH CHAINSAW
WITH ALUMINIUM
MINIUM CASING
PNEUMATIC
OUTPUT POWER
ER
SPEED
AIR CONS
AIR HOSE REQ'D
WEIGHT
4.47kW 6HP
4200rpm
3114L/min
110cfm@100psi
19mm ¾”ID
8.2kg
Quality Australian made chainsaw for the building
and construction industries, timber mills, railways,
quarries, ship yards, marine environments and
petrochemical industries. It can also be used under
water for construction and modification of piers,
bridges, boat moorings, etc with the addition of an
underwater exhaust attachment. Larger models also
available on request.
PT-1237Z
-1237Z
PNEUTECH
HEAVY
EAVY DUTY 17INCH CHAINSAW
WITH ZAMAC CASING
PNEUMATIC
OUTPUT POWER
SPEED
AIR CONS
AIR HOSE REQ'D
WEIGHT
4.47kW 6HP
4200rpm
3114L/min
110cfm@100psi
19mm ¾”ID
13.1kg
This chainsaw is made in Australia with a Zamac
body casing for the underground mining industry. For
applications in other industries, the IAT-1237A with
aluminium body casing is generally preferred due to
its lighter weight.
Enquire about Standard, Tungsten, and Diamond chains for the Chain Saws on this page.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
J-3
PAVEMENT BREAKERS
PT-280
PAVEMENT BREAKERS
4
28KG (62LB) PAVEMENT BREAKER
BUILT-IN LUBRICATION RESERVOIR
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
PRESSURE
28 x 160mm
28kg
730mm
1700Lt/min 60cfm
6-7bar 87-100psi
PNEUTECH
PT-200
PT-400
20KG (44LB)
PAVEMENT BREAKER
40KG (88LB)
PAVEMENT BREAKER
BUILT-IN LUBRICATION RESERVOIR
BUILT-IN LUBRICATION RESERVOIR
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
PRESSURE
28 x 108mm
20kg
630mm
1100Lt/min 39cfm
6-7bar 87-100psi
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
28 x 160mm
40kg
725mm
1700Lt/min 60cfm
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
J-4
Specifications subject to change without notice. E&OE. ©
PAVEMENT BREAKERS
PT-220
PT-260
5
PAVEMENT BREAKERS
22KG (48LB)
PAVEMENT BREAKER
26KG (57LB)
PAVEMENT BREAKER
BUILT-IN LUBRICATION RESERVOIR
BUILT-IN LUBRICATION RESERVOIR
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
PRESSURE
28 x 160mm
22kg
615mm
1200Lt/min 42cfm
6-7bar 87-100psi
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
PRESSURE
28 x 160mm
26kg
710mm
1500Lt/min 53cfm
6-7bar 87-100psi
PAVEMENT BREAKERS - LOW VIBRATION
PT-300LV
PT-230LV
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
PRESSURE
28 x 160mm
30kg
745mm
1500Lt/min 53cfm
6-7bar 87-100psi
23KG (51LB)
LOW VIBRATION
PAVEMENT BREAKER
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
PRESSURE
28 x 160mm
23kg
660mm
1300Lt/min 46cfm
6-7bar 87-100psi
PNEUTECH
30KG (62LB)
LOW VIBRATION
PAVEMENT BREAKER
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
J-5
CHIPPING HAMMERS
PT-045
PT-070
CHIPPING HAMMERS / PICK HAMMER
6
4.5KG (10LB)
CHIPPING HAMMER
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
PRESSURE
14.7 x 60mm
4.5kg
350mm
450Lt/min 16cfm
6 bar 87 psi
7.0KG (15LB)
CHIPPING HAMMER
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
14.7 x 60mm
7.0 kg
420mm
600Lt/min 21cfm
PICK HAMMER
PNEUTECH
PT-095
9.5KG (21LB)
PICK HAMMER
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
22 x 82.5mm
9.5kg
508mm
900Lt/min 32cfm
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
J-6
Specifications subject to change without notice. E&OE. ©
STONE WORKING HAMMERS
PT-005
PT-008
7
CHUCK
WEIGHT
AIR CONSUMPTION
PRESSURE
0.8KG (2LB)
STONE HAMMER
Ø12.5 x 60mm
0.5kg
250Lt/min 9cfm
4-5 bar 58 - 73psi
PT-016
AIR CONSUMPTION
PRESSURE
AIR CONSUMPTION
PRESSURE
Ø12.5 x 60mm
0.8kg
250Lt/min 9cfm
4-5 bar 58 - 73psi
5.0KG (11LB)
STONE HAMMER
Ø12.5 x 60mm
1.6kg
300Lt/min 11cfm
4-5 bar 58 - 73psi
CHUCK
WEIGHT
AIR CONSUMPTION
PRESSURE
pyramidal
5.0kg
650Lt/min 23cfm
6-7 bar 87-100 psi
PNEUTECH
WEIGHT
WEIGHT
PT-050
1.6KG (4LB)
STONE HAMMER
CHUCK
CHUCK
STONE WORKING HAMMERS
0.5KG (1LB)
STONE HAMMER
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
J-7
RIVET BUSTER
PT-124
RIVET BUSTER / ROCK DRILLS
8
STANDARD “D” HANDLE
RIVET BUSTER
150MM STROKE
BORE
30.16mm
STROKE
150mm
1500
246L/Min
11.82kg
521mm
3/8”FNPT
BLOWS PER MINUTE
AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
ROCK DRILLS
PT-120
12KG (26LB)
ROCK DRILL
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
PRESSURE
22 x 108mm
12kg
450mm
1400Lt/min 49cfm
6-7bar 87-100psi
PNEUTECH
PT-190
PT-250
19KG (42LB)
ROCK DRILL
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
PRESSURE
25KG (55LB)
ROCK DRILL
22 x 108mm
19kg
540mm
2500Lt/min 88cfm
6-7bar 87-100psi
CHUCK
WEIGHT
TOTAL LENGTH
AIR CONSUMPTION
PRESSURE
22 x 108mm
25kg
650mm
3000Lt/min 106cfm
6-7bar 87-100psi
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
J-8
Specifications subject to change without notice. E&OE. ©
PUMP
PT-419
9
VIBRATORS - CONCRETE / PUMP
25MM CENTRIFUGAL PUMP
WATER OUTLET
CAPACITY - 6M HEAD
CAPACITY - 9M HEAD
PRESSURE
AIR CONSUMPTION
TOTAL LENGTH
WEIGHT
25mm 1”
800Lt/min
700Lt/min
6-7bar 87-100psi
800/1200Lt/min
600mm
32kg
VIBRATORS - CONCRETE
PT-1030
PT-1040
40MM CONCRETE VIBRATOR
HEAD DIAMETER
30mm
HEAD DIAMETER
40mm
HEAD WEIGHT
4kg
20,000vpm
5m³/h
400L/Min 14cfm
2m
980N
HEAD WEIGHT
5kg
270mm
19,000vpm
15m³/h
500L/Min 18cfm
2m
1961N
FREQUENCY
PLACEMENT
AIR CONS
HOSE LENGTH
FORCE
HEAD LENGTH
FREQUENCY
PLACEMENT
AIR CONS
HOSE LENGTH
FORCE
PNEUTECH
30MM CONCRETE VIBRATOR
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
J-9
VIBRATORS - CONCRETE
PT-1050
PT-1060
VIBRATORS - CONCRETE
10
50MM CONCRETE VIBRATOR
HEAD DIAMETER
50mm
HEAD DIAMETER
60mm
HEAD WEIGHT
6kg
17,500vpm
23m³/hr
600L/Min 21cfm
2m
3432N
HEAD WEIGHT
7.5kg
17,500vpm
28m³/hr
900L/Min 32cfm
2m
4903N
FREQUENCY
PLACEMENT
AIR CONS
HOSE LENGTH
FORCE
PT-1080
PNEUTECH
60MM CONCRETE VIBRATOR
FREQUENCY
PLACEMENT
AIR CONS
HOSE LENGTH
FORCE
PT-1100
80MM CONCRETE VIBRATOR
100MM CONCRETE VIBRATOR
HEAD DIAMETER
80mm
HEAD DIAMETER
100mm
HEAD WEIGHT
13kg
16,500vpm
38m³/hr
1600L/Min 57cfm
2m
11768N
HEAD WEIGHT
18kg
15,000vpm
50m³/hr
1900L/Min 67cfm
2m
14710N
FREQUENCY
PLACEMENT
AIR CONS
HOSE LENGTH
FORCE
FREQUENCY
PLACEMENT
AIR CONS
HOSE LENGTH
FORCE
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
J-10
Specifications subject to change without notice. E&OE. ©
SECTION K
CHIPPING HAMMERS
CLAY DIGGER
DEMOLITION HAMMER
PAVEMENT BREAKERS
1
RIVET BUSTERS
ROCK DRILLS
TAMPER / COMPACTOR
TRENCH DRIGGER
AMERICAN
PNEUMATIC
TOOLS
CONSTRUCTION
TOOLS
•
Since its establishment in 1938 APT has become a leading
brand of pneumatic tools providing a diversified range of
quality products designed to meet the demands of the
demolition and construction industries.
•
APT tool components are made from only top grade
materials and have to conform to strict quality controls
throughout the manufacturing process. Critical parts
are heat treated and precision ground to ensure quality,
consistency and durability.
•
Every finished APT tool goes through several different fullcycle tests to ensure it meets company quality standards
and only then is packaged and placed into stock.
•
APT tools are stocked in Australia for immediate delivery and
are backed by Australia-wide spare parts & service ability.
CONTENTS - APT
TOOLS
Chipping Hammers
3
Clay Digger
5
Demolition Hammer
5
Pavement Breakers
Pavement Breakers
Pavement Breakers
Rivet Busters
Rock Drills
Tamper/compactor
Trench Digger
6
7
9
11
14
17
17
Accessories
Low Vibration
Backfill
APT
CONTENTS
2
PAGE
K-2
Specifications subject to change without notice. E&OE. ©
CHIPPING HAMMERS
AM
FEATURES
INTRODUCTION
3
The 600 Series hammers have a traditional pistol grip
handle, whereas the 400 series have a 4-bolt “D” handle.
The 4-bolt mounting of this handle makes for ease of
maintenance.
APT Chipping
ng Hammers have the follow
following features:
CHIPPING HAMMERS
APT Chipping Hammers are used for scaling, chiselling,
cleaning concrete mixer bowls, light demolition, concrete
picking, form stripping, etc.
• Flapper valvee design allows
allow dirt to pass without
stopping the tool
ol
• Deep case-hardened alloy steel cylinders
• Drop forged handles
• Replaceable Chuck Bushing
• Adjustable Exhaust Deflector
• Choice of retainers including the APT latch-type
• Includes oval retainer, locking spring and 3/8”NPT
inlet bushing
APT-652H
APT-654H
APT-653H
HEX. SHANK CHIPPING HAMMER
HEX. SHANK CHIPPING
CHIPPI HAMMER
HEX. SHANK CHIPPING HAMMER
50MM STROKE
75MM STROKE
100MM STROKE
HEX SHANK
BORE
BPM
MAX. AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
0.580 Inch
28.6mm 1-1/8”
2100
963L/min 34 cfm
5.50kg
337mm
3/8”NPT
HEX SHANK
BORE
BPM
MAX. AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
0.580 Inch
28.6mm 1-1/8”
1650
991L/min 35cfm
6.35kg
388mm
3/8”NPT
HEX SHANK
BORE
BPM
MAX. AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
0.580 Inch
28.6mm 1-1/8”
1375
1019L/min 36cfm
7.26kg
407mm
3/8”NPT
STANDARD ACCESSORIES
Part No. 7022 – Oval Collar Retainer
Part No. 1941 – Retainer Spring
Part No. 759 – Reducing Bush – 3/8”NPT
– Whip Hose
STANDARD ACCESSORIES
Part No. 7022 – Oval Collar Retainer
Part No. 1941 – Retainer Spring
Part No. 759 – Reducing Bush – 3/8”NPT
– Whip Hose
NOTE: This tool can also be ordered as model
APT-652R to suit 0.680 inch round shank chisels.
NOTE: This tool can also be ordered as model
APT-653R to suit 0.680 inch round shank chisels.
NOTE: This tool can also be ordered as model
APT-654R to suit 0.680 inch round shank chisels.
APT
STANDARD ACCESSORIES
Part No. 7022 – Oval Collar Retainer
Part No. 1941 – Retainer Spring
Part No. 759 – Reducing Bush – 3/8”NPT
– Whip Hose
For Chisels see next page.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
K-3
CHIPPING HAMMERS
APT-453H
APT-452H
APT-454H
CHIPPING HAMMERS
4
ANK CHIPPING HAMMER
HEX. SHANK
50MM STROKE
HEX SHANK
BORE
BPM
MAX. AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
0.580 Inch
28.6mm 1-1/8”
2100
963L/min 34cfm
7.7kg
345mm
3/8”NPT
HEX. SHANK CHIPPING
CHIP
HAMMER
HANK CHIPPING
C
HEX. SHANK
HAMMER
75MM STROKE
100MM STROKE
HEX SHANK
BORE
BPM
MAX. AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
HEX SHANK
0.580 Inch
28.6mm 1-1/8”
1650
991L/min 35cfm
8.2kg
365mm
3/8”NPT
BORE
BPM
MAX. AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
0.580 Inch
28.6mm 1-1/8”
1375
1019L/min 36cfm
8.6kg
407mm
3/8”NPT
STANDARD ACCESSORIES
Part No. 7022 – Oval Collar Retainer
Part No. 1941 – Retainer Spring
Part No. 759 – Reducing Bush – 3/8”NPT
– Whip Hose
STANDARD ACCESSORIES
Part No. 7022 – Oval Collar Retainer
Part No. 1941 – Retainer Spring
Part No. 759 – Reducing Bush – 3/8”NPT
– Whip Hose
STANDARD ACCESSORIES
Part No. 7022 – Oval Collar Retainer
Part No. 1941 – Retainer Spring
Part No. 759 – Reducing Bush – 3/8”NPT
– Whip Hose
NOTE: This tool can also be ordered as model
APT-452R to suit 0.680 inch round shank chisels.
NOTE: This tool can also be ordered as model
APT-453R to suit 0.680 inch round shank chisels.
NOTE: This tool can also be ordered as model
APT-454R to suit 0.680 inch round shank chisels.
ACCESSORIES
APT
The APT range of Chipping Hammers takes the
following 0.580 Hexagon Shank Oval Collar Tools:
Optional Chipping Hammer Accessories at extra cost:
PART
LENGTH (mm)
DESCRIPTION
PART
DESCRIPTION
AN52008
AN52011
AN52109
AN52112
AN52118
AN52124
AN52136
AN52148
AN52209
AN52212
AN52218
AN52224
AN52236
AN52248
AN52309
AN52312
AN52318
AN52409
AN52412
AN52418
AN52509
AN52512
AN52518
AN52609
AN52610
AN52710
AN52800
AN52811
AN52911
216
292
229
305
457
610
914
1219
229
305
457
610
914
1219
229
305
457
229
305
457
229
305
457
229
254
254
114*
286
286
Blank
Blank
Point
Point
Point
Point
Point
Point
Narrow Chisel
Narrow Chisel
Narrow Chisel
Narrow Chisel
Narrow Chisel
Narrow Chisel
38mm Chisel
38mm Chisel
38mm Chisel
50mm Chisel
50mm Chisel
50mm Chisel
63mm Chisel
63mm Chisel
63mm Chisel
75mm Chisel
Bush Hammer - Steel
Bush Hammer – Carbide
Clay Spade
Rod Driver – 16mm
Rod Driver – 19mm
3383
Latch type retainer (no springs)
3026
Quick-change retainer (oval collar)
5550
Ball-type retainer
614 4
Round Collar retainer
3388
7/8”-24 to ½” hose tail swivel
2698
7/8”-24 to 3/8” NPT swivel
9109
2.4m x ½” ID whip hose with universal coupler and 7/8”-24 swivel
9266
2.4m x ½” ID whip hose with universal coupler and ½” NPT swivel
18290
Bolt-on quick change retainer (no springs)
*Blade Length
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
K-4
Specifications subject to change without notice. E&OE. ©
CLAY
LA DIGGER
APT-118
5
CHUCK
BORE
STROKE
BLOWS PER MINUTE
AIR CONS
AIR INLET SIZE
WEIGHT
LENGTH
7/8” x 3¼” 22 x 82mm
1-¾”
3-3/8”
2400
1020L/min 36cfm
3/8”MBSP
14.1kg
570mm
FEATURES:
• Deep case - hardened drop forged
alloy steel cylinders
• Replaceable chuck bushing
• Latch type retainer
• Built-in automatic oiler
• D-style handle
• Inside trigger for better control & safety
• Automatic valve
The APT-118 takes the same non-rotating steels
as the APT-115 Rock Drill.
DEMOLITION HAMMER
DEMOLITION HAMMER / CLAY DIGGERS
14KG (31LB) CLAY DIGGER
APT-125
10KG (21LB) DEMOLITION HAMMER
70MM STROKE
HEX SHANK
BORE
BPM
MAX. AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
7/8” x 3¼”
22 x 82mm
43mm 1-11/16”
2120
1189L/min 42cfm
9.55kg
470mm
3/8”FBSP
APT
Features deep case-hardened drop forged alloy steel
cylinders, replaceable chuck bushing and latch type
retainer. The “D” style handle makes way for an
inside trigger for better control and safety. Flapper
valve design allows dirt to pass without stopping
the tool and the chuck and piston stem bushing are
replaceable. Takes the same non-rotating steels as
the APT-115 Rock Drill.
Enquire about chisels.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
K-5
PAVEMENT BREAKERS
INTRODUCTION
PAVEMENT BREAKERS
6
Tough and dependable, the high performance model APT-190
is the most powerful air tool APT makes. It is designed for big
jobs such as heavy demolition and concrete breaking. The
APT-160 model paving breaker is a versatile, hard-hitting tool
that can be used for medium to heavy demolition work and
concrete breaking, and is the perfect all around breaker. The
APT-140 is a rugged yet lightweight paving breaker designed for
light to medium construction work. It is ideally suited for plant
maintenance work such as light demolition of floors, pavement,
frozen ground and masonry walls and is popular for bridge deck
jobs. The models APT-140, APT-160 and APT-190 standard
paving breakers are also available in low vibration versions that
are called the LV series. Model APT-117, the 15kg class paving
breaker, is the ideal tool for light to medium demolition work as
well as for use in confined areas.
15KG (30LB) PAVEMENT BREAKER
AKER
BORE
STROKE
BLOWS PER MINUTE
MAX AIR CONS
AIR INLET SIZE
WEIGHT
LENGTH
25 x 108mm
1” x 4¼”
44.5mm 1¾”
85.7mm 3-3/8””
1850
1076L/min 38cfm
cfm
3/8”MNPT
15kg
553mm
APT-160
BORE
APT
STROKE
BLOWS PER MINUTE
MAX AIR CONS
AIR INLET SIZE
WEIGHT
LENGTH
Automatic valves
•
Drop forged alloy steel handle
•
Built-in automatic oiler
•
Rubber handle grips
•
Latch type retainer
•
Swivel hose connection
•
Noise dampening mufflers
•
Four bolt backhead
•
Replaceable chuck bushing
(except for models APT-140 and APT-140A)
20KG (40LB) PAVING BREAKER
R
CHUCK
BORE
STROKE
BLOWS PER MINUTE
MAX AIR CONS
AIR INLET SIZE
WEIGHT
LENGTH
25 x 108mm
1” x 4¼”
47.6mm 1-7/8”
108mm 4¼”
1500
1359L/min 48cfm
fm
½”MNPT
19.5kg
537mm
APT-190
31KG (60LB) PAVEMENT BREAKER
REAKER
CHUCK
•
APT-140
APT-117
CHUCK
Features and benefits include:
28 x 160mm
1-1/8” x 6”
57.2mm 2¼”
¼”
104.8mm 4-1/8”
-1/8”
1680
1840L/min 65cfm
½”MNPT
30.8kg
654mm
42KG (90LB) PAVEMENT BREAKER
CHUCK
BORE
STROKE
BLOWS PER MINUTE
MAX AIR CONS
AIR INLET SIZE
WEIGHT
LENGTH
28 x 160mm
mm
1-1/8” x 6”
66.7mm
155.6mm 6-1/8”
1350
2265L/minn 80cfm
¾”MNPT
42.2kg
737mm
For Steels for these tools see next page.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
K-6
Specifications subject to change without notice. E&OE. ©
PAVEMENT BREAKER ACCESSORIES
ACCESSORIES FOR APT-115
ACCESSORIES FOR APT-140
APT 140 takes all of the accessories that fit
Model APT-117 plus the following:
Length mm
Description
AN15014
356
Moil Point
AN15018
457
Moil Point
Part No.
Length mm
Description
AN15024
610
Moil Point
AN40072
1829
Moil Point
AN15114
356
25mm Chisel
AN40096
2438
Moil Point
AN15118
457
25mm Chisel
AN40172
1829
25mm Chisel
AN15124
610
25mm Chisel
AN40196
2438
25mm Chisel
AN15214
356
75mm Chisel
AN40272
1829
75mm Chisel
AN15218
457
75mm Chisel
AN40296
2438
75mm Chisel
AN15224
610
75mm Chisel
AN15314
356
Heavy Duty Point
AN15318
457
Heavy Duty Point
AN15411
279
Asphalt Cutter
AN15505
114*
Clay Spade
AN15612
305
Bush Hammer
AN15717
438
Digging Chisel
AN15809
229
Detachable Shank
AN15906
-
150mm Square Foot^
AN15907
-
178mm Round Foot^
AN15908
-
203mm Square Foot^
*Length of blade
^Use with AN15809 detachable shank
ACCESSORIES FOR APT-117
7
PAVEMENT BREAKER ACCESSORIES
Part No.
ACCESSORIES FOR APT-117 Cont..
Length mm
Description
Part No.
AN17014
356
Moil Point
Length mm
Description
AN17718
368
Concrete Buster
AN17018
457
Moil Point
AN17812
292
Brick Removing Tool
AN17024
610
Moil Point
AN17909
229
Detachable Shank
AN17036
914
Moil Point
AN17906
-
150mm Square Foot^
AN17048
1219
Moil Point
AN17907
-
178mm Round Foot^
AN17060
1524
Moil Point
AN17908
-
203mm Square Foot^
AN17114
356
25mm Chisel
AN18002
-
50mm Driver Shoe^
AN17118
457
25mm Chisel
AN18003
-
75mm Driver Shoe^
AN17124
610
25mm Chisel
AN18105
-
16mm Pin Driver
AN17136
914
25mm Chisel
AN18106
-
19mm Pin Driver
AN17148
1219
25mm Chisel
AN18107
-
22mm Pin Driver
AN17160
1524
25mm Chisel
AN18108
-
25mm Pin Driver
AN17214
356
75mm Chisel
AN18110
-
32mm Pin Driver
AN17218
457
75mm Chisel
AN18112
-
38mm Pin Driver
AN17224
610
75mm Chisel
AN18205
-
16mm Gr. Rod Driver
AN17236
914
75mm Chisel
AN18206
-
19mm Gr. Rod Driver
AN17248
1219
75mm Chisel
AN18207
-
22mm Gr. Rod Driver
AN17260
1524
75mm Chisel
AN18208
-
25mm Gr. Rod Driver
AN17314
356
Heavy Duty Point
AN18301
140
Sign Post Driver
AN17318
457
Heavy Duty Point
AN18302
-
45mm Sq. Post Driver
AN17414
356
Heavy Duty Chisel
AN18303
-
50mm Sq. Post Driver
AN17418
457
Heavy Duty Chisel
AN18304
-
57mm Sq. Post Driver
AN17511
279
Asphalt Cutter
AN18306
-
63mm Sq. Post Driver
AN17512
305
Asphalt Wedge
AN18400
-
Rail Spike Driver
AN17605
140*
Clay Spade
AN18501
-
Pipe Driver 25-50mm
AN17612
229
Bush Hammer
AN17617
438
Digging Chisel
*Length of blade
^Use with AN17909 Detachable Shank
Specifications subject to change without notice. E&OE. ©
APT
Part No.
K-7
PAVEMENT BREAKER ACCESSORIES
ACCESSORIES FOR APT-160
PAVEMENT BREAKER ACCESSORIES
8
Part No.
Length mm
Description
Part No.
Length mm
Description
AN60014
356
Moil Point
AN60618
419
Digging Chisel
AN60018
457
Moil Point
AN60711
267
Tarmac Cutter
AN60024
610
Moil Point
AN60715
368
Concrete Buster
AN60036
914
Moil Point
AN60812
292
Brick Remover
AN60048
1219
Moil Point
AN60816
406
Keen Kut
AN60060
1524
Moil Point
AN60903
-
38mm Plug Shank
AN60072
1829
Moil Point
AN60913
-
38mm Plug Feather
-
50mm Plug Shank
50mm Plug Feather
AN60096
2438
Moil Point
AN61004
AN60114
356
25mm Chisel
AN61014
-
AN60118
457
25mm Chisel
AN61109
229
Detachable Shank
AN60124
610
25mm Chisel
AN17906
-
150mm Square Foot^
AN60136
914
25mm Chisel
AN17907
-
178mm Round Foot^
AN60148
1219
25mm Chisel
AN17908
-
203mm Square Foot^
AN60160
1524
25mm Chisel
AN61116
-
16mm Pin Driver
AN60172
1829
25mm Chisel
AN61119
-
19mm Pin Driver
AN60196
2438
25mm Chisel
AN61122
-
22mm Pin Driver
AN60214
356
75mm Chisel
AN61125
-
25mm Pin Driver
AN60218
457
75mm Chisel
AN61132
-
32mm Pin Driver
AN60224
610
75mm Chisel
AN61138
-
38mm Pin Driver
AN60236
914
75mm Chisel
AN61144
-
44mm Pin Driver
AN60248
1219
75mm Chisel
AN61150
-
50mm Pin Driver
AN60260
1524
75mm Chisel
AN61164
-
64mm Pin Driver
AN60272
1829
75mm Chisel
AN61216
-
16mm Gr. Rod Driver
AN60296
2438
75mm Chisel
AN61219
-
19mm Gr. Rod Driver
AN60314
356
Heavy Duty Point
AN61222
-
22mm Gr. Rod Driver
AN60318
457
Heavy Duty Point
AN61225
-
25mm Gr. Rod Driver
AN60414
356
Heavy Duty Chisel
AN61300
140
Round Post Driver
AN60418
457
Heavy Duty Chisel
AN61302
-
45mm Sq. Post Driver
AN60511
279
Asphalt Cutter
AN61303
-
50mm Sq. Post Driver
AN60512
305
Asphalt Wedge
AN61304
-
57mm Sq. Post Driver
AN60605
127*
Clay Spade
AN61305
-
63mm Sq. Post Driver
AN60606
152*
Clay Spade
AN61400
-
Rail Spike Driver
AN60608
203*
Clay Spade
AN61501
-
25-50mm Pipe Driver
AN60609
229
Bush Hammer
AN61502
-
38-50mm Pipe Driver
*Blade width
^Use with AN61109 Detachable Shank
ACCESSORIES FOR APT-190
APT
PAVEMENT BREAKER APT-190 TAKES THE SAME SERIES OF
ACCESSORIES AS MODEL APT-160.
K-8
Specifications subject to change without notice. E&OE. ©
PAVEMENT BREAKERS – LOW VIBRATION
INTRODUCTION
9
The elastomeric torsion springs are also easily replaced should the
need arise. Each APT Low Vibration Breaker is supplied with an
APT silencer as standard equipment.
PAVEMENT BREAKERS – LOW VIBRATION
APT Low Vibration Pavement Breakers are designed to significantly
reduce the vibration transmitted from the tool to the operator,
thus improving operator comfort reducing fatigue and increasing
productivity. The APT Low Vibration system is built into the handle
assembly of the breaker. It consists of a specially compounded
elastomeric torsion spring built into the pivot point of each handle
as shown in figure 1. These torsion springs are substantially more
efficient in absorbing energy than conventional mechanical springs
resulting in a higher degree of vibration absorption. A.P.T. Low
Vibration Breakers are available in three sizes: 21kg, 32kg and 41kg.
The handle assemblies on these breakers are also interchangeable
with those on the standard model APT Breakers which enables
these to be converted to low vibration units in just a few minutes.
Figure 1.
APT - LV Handle Assembly
APT-140A
APT-160A
21KG (40LB) LOW VIBRATION
ON
PAVEMENT BREAKER
CHUCK
BORE
BLOWS PER MINUTE
MAX AIR CONS
AIR INLET SIZE
WEIGHT
LENGTH
CHUCK
BORE
STROKE
BLOWS PER MINUTE
MAX AIR CONS
AIR INLET SIZE
WEIGHT
LENGTH
28 x 160mm
1-1/8” x 6”
57.2mm 2¼”
108.4mm 4 1/8”
1680
1840L/min
65cfm
½”MBSP
32kg
718mm
APT
STROKE
25 x 108mm
1” x 4¼”
47.6mm 1-7/8”
108mm 4¼”
1500
1359L/min 48cfm
½”MBSP
21kg
610mm
32KG (60LB) LOW VIBRATION
N
PAVEMENT BREAKER
For Steels for these tools see page K-7, K-8
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
K-9
PAVEMENT BREAKERS – LOW VIBRATION
AP-190A
PAVEMENT BREAKERS – LOW VIBRATION
10
41KG (90LB) LOW VIBRATION
PAVEMENT BREAKER
CHUCK
BORE
STROKE
BLOWS PER MINUTE
MAX AIR CONS
AIR INLET SIZE
WEIGHT
LENGTH
28 x 160mm
1-1/8” x 6”
66.7mm 2 5/8”
155.6mm 6 1/8”
1350
2123-2265Nm
75-80cfm
¾”MBSP
41kg
788mm
ACCESSORIES FOR LV BREAKERS
APT
ALL MODELS OF LOW VIBRATION BREAKERS TAKE THE SAME
ACCESSORIES AS THEIR CORRESPONDING STANDARD MODELS.
For Steels for these tools see page K-8
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
K-10
Specifications subject to change without notice. E&OE. ©
RIVET BUSTERS
INTRODUCTION
11
RIVET BUSTERS
The APT-133 Rivet Buster was originally designed for cutting rivets
off metal structures. Today APT Rivet Busters carry with them
a reputation for being tough, powerful tools ideally suited for all
types of medium to heavy demolition work.
With half the weight of the 31kg pavement breakers, their high
impact-to-weight ratio makes the APT rivet busters the most
efficient tools in the range.
Model APT-133 is good for repair work on old bridges and also for
cutting up underground tanks. APT rivet busters are available with
150mm, 203mm or 279mm strokes. An extended T-style handle
is also available for vertical demolition work. The APT-133 4Bolt
comes with a 4-bolt style handle incorporating a vibration damping
feature and another version has an internal trigger to minimise
accidental activation.
APT Rivet Busters have the following features:
•
Deep case-hardened alloy steel cylinder
•
Use jumbo extra heavy duty steels
•
Heavy duty upper and lower sleeves
•
Adjustable exhaust deflector
•
Teflon throttle valve
•
Long stroke for powerful blows
APT-133
STANDARD “D” HANDLE
RIVET BUSTER
203MM STROKE
30.16mm
STROKE
203mm
1140
1303L/Min 46cfm
13.64kg
572mm
3/8”FNPT
BLOWS PER MINUTE
AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
APT
BORE
For Steels for these tools see page K-13
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
K-11
RIVET BUSTERS
APT-133FB
APT-133ST
RIVET BUSTERS
12
VIBRATION DAMPED RIVET
BUSTER WITH 4-BOLT HANDLE 203MM STROKE
EXTERNAL TRIGGER RIVET
BUSTER – 203MM STROKE
BORE
30.16mm
BORE
30.16mm
STROKE
STROKE
203mm
1000
1133L/Min 40cfm
12.73kg
616mm
½”FNPT
BLOWS PER MINUTE
203mm
1140
1303L/Min 46cfm
13.64kg
572mm
3/8”FNPT
BLOWS PER MINUTE
AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
Apart from including vibration damping, the
4-bolt handle has the advantage of being very
easy to dis-assemble for service.
APT-133TH
“T” HANDLE RIVET BUSTER
WITH 203MM STROKE
AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
The external trigger minimises accidental
activation when carrying the tool by the handle.
APT-1133
STANDARD “D” HANDLE
RIVET BUSTER
279MM STROKE
BORE
30.16mm
STROKE
203mm
1140
1303L/Min 46cfm
15.90kg
787mm
½”FNPT
APT
BLOWS PER MINUTE
AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
BORE
30.16mm
STROKE
279mm
850
1472L/Min 52cfm
15kg
648mm
3/8”FNPT
BLOWS PER MINUTE
AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
“T” Handle tools are used for vertical
demolition work.
For Steels for these tools see page K-13
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
K-12
Specifications subject to change without notice. E&OE. ©
RIVET BUSTERS
APT-1133 T-HANDLE
APT-1133ST
13
RIVET BUSTERS
EXTERNAL TRIGGER RIVET
BUSTER – 279MM STROKE
“T” HANDLE RIVET BUSTER
- 279MM STROKE
BORE
30.16mm
STROKE
279mm
850
1472L/Min 52cfm
15kg
648mm
3/8”FNPT
BLOWS PER MINUTE
AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
BORE
30.16mm
STROKE
LENGTH
279mm
850
1472L/Min 52cfm
17.27kg
864mm
AIR INLET SIZE
½”FNPT
BLOWS PER MINUTE
AIR CONS
WEIGHT
The external trigger minimises accidental activation
when carrying the tool by the handle.
“T” Handle tools are used for vertical demolition work.
ACCESSORIES FOR RIVET BUSTERS
All APT Rivet Busters are fitted with heavy duty upper and lower sleeves to take
Jumbo steels. The following Jumbo steels are available:
POINTS AND CHISELS
HEAT EXCHANGER PUNCHES
Part No.
Length (mm)
Description
Part No.
Clearance (mm)
Tube size
Tube Guage
AN33010
254
Point
AN3346F
100
¾”
12
AN33012
305
Point
AN3348H
100
1”
14
AN33018
457
Point
AN3366F
150
¾”
12
AN33110
254
25mm Chisel
AN3366H
150
¾”
14
AN33112
305
25mm Chisel
AN3368F
150
1”
12
AN33118
457
25mm Chisel
AN3386F
200
¾”
12
AN33210
254
Side Cut Chisel
AN3386H
200
¾”
14
AN33212
305
Side Cut Chisel
AN33218
457
Side Cut Chisel
Other lengths and tube sizes available.
RIVET BACK-OUT PUNCHES
Length (mm)
Rivet Size
Weight(kg)
AN33310
254
3/8”
2.0
AN33313
254
½”
2.0
AN33319
254
¾”
2.0
AN33322
254
7/8”
2.0
APT
Part No.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
K-13
ROCK DRILLS
ACCESSORIES FOR APT-109
APT-109
14
ROCK DRILLS
ROTATING STEELS WITH INSERTED TUNGSTEN CARBIDE CHISEL TIP
4KG (9LB) ROTARY
HAMMER DRILL
FOR DRILL HOLES UP TO 300MM X 25.4MM
CHUCK SIZE
19 x 82mm
BORE
31.8mm
25.4mm
3400
595L/Min 21cfm
4.1kg
381mm
3/8”FNPT
STROKE
BLOWS PER MINUTE
AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE:
This versatile tool is both a drill and a chipping hammer. A push
of the rotation release button quickly converts it to a hammer.
As a rotary hammer the APT-109 is used in a wide variety of
construction and maintenance applications such as driving or
setting masonry anchors and drilling holes in concrete, bricks
or rock. As a light percussion tool they can be used for cleaning
and chipping in horizontal, vertical and overhead work.
ACCESSORIES FOR APT-109
Hole Size
(mm)
Hole Size
(inches)
Length
(mm)
Weight
(kg)
AR08200
7.9
5/16
200
AR10200
9.5
3/8
200
AR11200
11.1
7/16
200
AR12200
12.7
½
200
0.41
AR12267
12.7
½
267
0.45
AR16200
15.9
5/8
200
0.50
AR16300
15.9
5/8
300
0.59
AR16450
15.9
5/8
450
0.77
AR19200
19.1
¾
200
0.59
AR19300
19.1
¾
300
0.73
AR19450
19.1
¾
450
0.95
AR22200
22.2
7/8
200
0.73
AR22300
22.2
7/8
300
0.91
AR22450
22.2
7/8
450
1.27
AR25200
25.4
1
200
0.91
AR25300
25.4
1
300
1.14
AR25450
25.4
1
450
1.59
AR25600
25.4
1
600
2.05
AR28200
28.4
1-1/8
200
1.14
AR28300
28.4
1-1/8
300
1.45
AR28450
28.4
1-1/8
450
2.05
ACCESSORIES FOR APT-109
4-WING BITS FOR HOLLOW DRILL STEMS
ROTATING STEELS WITH INSERTED TUNGSTEN CARBIDE CHISEL TIP
Part No.
Part No.
Part No.
Hole Size (mm)
Hole Size (inches)
Stem No.
AS10127
12.7
½
AS10200
AS10143
14.3
9/16
AS10200
AS10159
15.9
5/8
AS10200
2.09
AS10160
16.0
-
AS10200
1.27
AS10175
17.5
11/16
AS10200
300
1.45
AS10191
19.1
¾
AS10200
1-3/8
450
2.05
AS16214
21.4
27/32
AS16200
1½
200
1.27
AS16250
25.0
-
AS16200
38.1
1½
300
1.73
AS16349
34.9
1-3/8
AS16200
38.1
1½
450
2.18
Hole Size
(mm)
Hole Size
(inches)
Length
(mm)
Weight
(kg)
AR32200
31.7
1¼
200
1.23
AR32300
31.7
1¼
300
1.45
AR32450
31.7
1¼
450
AR35200
34.9
1-3/8
200
AR35300
34.9
1-3/8
AR35450
34.9
AR38200
38.1
AR38300
AR38450
NON-ROTATING ACCESSORIES
APT
HOLLOW DRILL STEMS FOR TAPERED 4-WING BITS
Part No.
Length (mm)
Description
AN09012
254
Moil Point
AN09013
229
Chisel Blank
AN09014
254
Round Nose Chisel
ADAPTORS FOR SDS TYPE BITS
AN09015
254
25mm Flat Chisel
Part No.
Description
AN09016
254
Diamond Point Chisel
AS17586
For round SDS bits
AN09017
254
Cape Chisel
AS17587
For splined SDS bits
AN09018
254
Part No.
Description
AS10200
10mm dia. x 200mm long
AS16200
16mm dia. x 200mm long
MUFFLER
Part No.
Description
AM 1001
....
Timber Splitter
AN09019
Bush Hammer
AN09020
Bush Hammer Shank
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
K-14
Specifications subject to change without notice. E&OE. ©
ROCK DRILLS
ACCESSORIES FOR APT-115
APT-115
15
E-THREAD HOLLOW DRILL STEELS FOR SHOULDER DRIVE BITS
FOR DRILL HOLES UP TO 400MM
M X 31.8MM
CHUCK SIZE
7/8” x 3¼”
22 x 82mm
49.21mm
mm
34.95mm
mm
2900
1019L/min
L/min 36cfm
8.64kgg
467mm
m
3/8”MNPT
MNPT
BORE
STROKE
BLOWS PER MINUTE
AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE:
Length (mm)
Weight (kg)
AE15012
305
1.18
AE15018
457
1.55
AE15024
610
2.00
AE15030
762
2.45
AE15036
914
2.91
AE15048
1219
3.86
AE15060
1524
4.77
AE15072
1829
5.55
ROCK DRILLS
9KG (15LB) ROTARY
HAMMER DRILL
Part No.
PLAIN STEEL SHOULDER DRIVE BITS FOR E-THREAD DRILL STEELS
Similar uses to APT-109 but a heavier
avier tool for drilling
deeper and wider holes and use on heavier chipping
and scraping work.
Part No.
Diameter (mm)
Diameter (inches)
Weight (kg)
AE15124
23.8
15/16
0.064
AE15125
25.4
1
0.064
AE15129
28.6
1-1/8
0.073
AE15132
31.75
1¼
0.073
Note: The above bits have no carbide inserts and are only suitable for very soft rock.
FEATURES
• Rotation stop
• Built-in automatic oiler
• Latch type retainer
• Light weight cast aluminium handle
• Muffler available
ACCESSORIES FOR APT-115
APT-137
E-THREAD HOLLOW DRILL STEELS FOR SHOULDER DRIVE BITS
Part No.
Length (mm)
Description
AN15014
356
Moil Point
AN15018
457
Moil Point
AN15024
610
Moil Point
AN15114
356
25mm Chisel
AN15118
457
25mm Chisel
AN15124
610
25mm Chisel
RILL
17KG (30LB) ROCK DRILL
DRILLS HOLES UP TO 44.5MM DIA.
IA. x 2.4M LONG
AN15214
356
75mm Chisel
AN15218
457
75mm Chisel
AN15224
610
75mm Chisel
AN15314
356
Heavy Duty Point
AN15318
457
Heavy Duty Point
BLOWS PER MINUTE
AN15411
279
Asphalt Cutter
AIR CONS
AN15505
114*
Clay Spade
WEIGHT
AN15612
305
Bush Hammer
AN15717
438
Digging Chisel
CHUCK SIZE
BORE
229
Detachable Shank
AN15906
-
150mm Square Foot^
AN15907
-
178mm Round Foot^
AN15908
-
203mm Square Foot^
*Length of blade
^Use with detachable shank AN15809
LENGTH
AIR INLET SIZE:
For general construction, utility work andd plant
maintenance. Designed for drilling through hard faced
rock, quarry drilling and drilling secondary holes for
blasting. Also adaptable for wet drilling.
FEATURES:
• 4 drilling speeds
• Available wet or dry
• Rubber handle grips
• Counter clockwise rotation
• Replaceable piston stem bearing
APT
AN15809
STROKE
7/8” x 4¼”
22 x 108mm
60.33mm
66.68mm
2300
2549L/Min 90cfm
17.27kg
502mm
½”MNPT
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
K-15
ROCK DRILLS
ACCESSORIES FOR APT-137
ACCESSORIES FOR APT-137
16
ROCK DRILLS
H-THREAD HOLLOW DRIVE STEELS FOR SHOULDER DRIVE BITS
Part No.
Length (mm)
Weight (kg)
AH37012
305
1.55
AH37018
457
2.36
AH37024
610
2.91
AH37030
762
ECONOMY SHOULDER DRIVE BITS WITH 6MM CARBIDE
INSERTS FOR H-THREAD DRILL STEELS
3.55
AH37036
914
4.55
AH37048
1219
5.32
AH37060
1524
6.55
AH37072
1829
7.64
AH37096
2438
9.95
AH37100
Diameter (mm)
Diameter (inches)
Weight (kg)
AH37235
34.9
1-3/8
0.23
AH37238
38.1
1½
0.23
AH37241
41.3
1-5/8
0.34
AH37245
44.5
1-3/4
0.34
BUTTON TYPE SHOULDER DRIVE BITS FOR H-THREAD DRILL STEELS
H-THREAD COUPLING
Part No.
Part No.
Part No.
Diameter (mm)
Diameter (inches)
Weight (kg)
AH37335
34.9
1-3/8
0.23
AH37338
38.1
1½
0.23
AH37341
41.3
1-5/8
0.34
AH37345
44.5
1-3/4
0.34
Weight
Note: For non-rotating accessories for this tool see model APT-140 on page...
0.34
STANDARD SHOULDER DRIVE BITS WITH 14MM CARBIDE
INSERTS FOR H-THREAD DRILL STEELS
Part No.
Diameter (mm)
Diameter (inches)
Weight (kg)
AH37135
34.9
1-3/8
0.23
AH37138
38.1
1½
0.23
AH37141
41.3
1-5/8
0.34
AH37145
44.5
1-3/4
0.34
APT-155
ACCESSORIES FOR APT-155
TAKES ALL OF THE H-THREAD HOLLOW DRILL STEELS USED BY
THE APT-137 PLUS THE FOLLOWING:
H-THREAD HOLLOW DRIVE STEELS FOR SHOULDER DRIVE BITS
Length (mm)
Weight (kg)
AH55120
3048
12.36
28KG (60LB) ROCK DRILL
ILL
H-THREAD COUPLING
DRILLS HOLES UP TO
50MM DIAMETER X 3.0M LONG
Part No.
Weight (kg)
AH37100
0.34
CHUCK SIZE
BORE
STROKE
BLOWS PER MINUTE
AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE:
APT
Part No.
7/8” x 4¼”
¼”
8mm
22 x 108mm
66.68mm
m
76.20mm
2100
3390L/Min 120cfm
27.73kg
568mm
¾”MNPT
Same uses as APT-137 but heavier tool for heavier
work. Designed for drilling through hard faced rock,
quarry drilling and drilling secondary holes for blasting.
Also adaptable for wet drilling.
FEATURES:
• 3 drilling speeds
• Available wet or dry
• Rubber handle grips
• Counter clockwise rotation
• Replacement piston stem bearing
• Built-in automatic oiler
STANDARD SHOULDER DRIVE BITS WITH 14MM CARBIDE
INSERTS FOR H-THREAD DRILL STEELS
Part No.
Diameter (mm)
Diameter (inches)
Weight (kg)
AH55148
47.63
1-7/8
0.34
AH55150
50.80
2
0.45
ECONOMY SHOULDER DRIVE BITS WITH 6MM CARBIDE
INSERTS FOR H-THREADED DRILL STEELS
Part No.
Diameter (mm)
Diameter (inches)
Weight (kg)
AH55248
50.80
2
0.45
BUTTON SHOULDER DRIVE BITS FOR H-THREAD DRILL STEELS
Part No.
Diameter (mm)
Diameter (inches)
Weight (kg)
AH55348
47.63
1-7/8
0.34
AH55350
50.80
2
0.45
Note: For non-rotating accessories for this tool see APT-140 on page…
For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
K-16
Specifications subject to change without notice. E&OE. ©
TAMPER / COMPACTOR – BACK
BACKFILL
APT-131
17
STANDARD BUTT
146mm dia.
BORE
38mm
140mm
670
1189L/Min 42cfm
½”NPT
20mm ¾” I.D.
1310mm
16.8kg
Half moon – for poles
Small round – 75mm dia.
STROKE
BLOWS PER MINUTE
MAX. AIR CONS
AIR INLET SIZE
AIR HOSE SIZE
LENGTH
WEIGHT
OPTIONAL BUTTS
FEATURES
• Built-in large automatic oiler
• Flapper valve design allows dirt to pass without
stopping the tool
• Internally reinforced 146mm diameter malleable
iron standard butt
ng, etc.
Used for soil compaction, small area tamping, asphalt packing,
Applications range from foundation and pavement repair too the
onal
installation of power and telegraph poles. APT offers an optional
half-moon shaped butt for working around posts and poles and ann
optional small round butt for small areas.
TRENCH DIGGER
APT-119
TAMPER / COMPACTOR – BACKFILL / TRENCH DIGGER
BACKFILL TAMPER / COMPACTOR
17KG (37LB) TRENCH DIGGER
CHUCK SIZE
22mm x 82mm
BORE
44.45mm
85.73mm
2400
1076L/Min 38cfm
16.78kg
788mm
1/2”FNPT
STROKE
B.P.M
MAX. AIR CONS
WEIGHT
LENGTH
AIR INLET SIZE
APT
FEATURES
• Deep case-hardened drop forged alloy steel cylinders
• Replaceable chuck bushing
• Latch type retainer
• Built-in automatic oiler
• T-style forged handle
• Rubber handle grips
• Teflon-faced throttle valve
• Automatic valve
The APT-119 takes the same steels as model APT-115 Rock
Drill. (page K-15)
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
K-17
APT
18
K-18
Specifications subject to change without notice. E&OE. ©
SECTION L
ABRASIVE
ACCESSORIES
FINISHING
ACCESSORIES
ALLIANCE
ABRASIVES &
ACCESSORIES
FOR AIR TOOLS
•
This section of the Catalogue contains a selection of
abrasive products and tool accessories which can be used
with numerous models of the Air Tools featured in other
sections.
•
Some of the abrasive products and accessories featured are
unique to a particular tool whilst others can be used on a
number of different models and brands.
1
CONTENTS ALLIANCE - ABRASIVES & ACCESSORIES
TOOLS
ALLIANCE - ABRASIVES & ACCESSORIES
CONTENTS
2
L-2
PAGE
Abrasive Belts
Abrasive Discs
Abrasive Discs
Abrasive Sheets
Abrasive Discs
Abrasive Discs
Abrasive Triangles
Surface Cond. Discs
Surface Cond. Discs
Surface Cond. Discs
Surface Cond. Discs
Cut-Off Wheel
Grinding Cup-Wheel
Grinding Disc
Clean & Strip Discs
Cleaning Disc
Clean & Strip Disc
Polishing Disc
10, 20, 30mm wide
50mm Quick Mount
75mm Quick Mount
75mm x 110mm Hook & Loop
50mm Hook & Loop
75mm Hook & Loop
75mm x 75mm Hook & Loop
50mm, Quick Mount
75mm, Quick Mount
50mm Kit
75mm Kit
75mm
30mm
50mm
100, 115, 125mm
100mm, woven
100mm
100mm, wool
Flap Disc
100mm
Impact Sockets
Impact Accessories
Impact Sockets
Impact Accessories
Impact Sockets
Impact Accessories
Impact Sockets
Impact Accessories
Impact Sockets
Impact Accessories
Impact Sockets
Impact Accessories
Impact Sockets
Impact Accessories
Chisel Retainer
Chisel Retainer
Saw Blades
Needles
Needles
Needle Attachment
Sealant Blades
Chisels
Pittsburg Tool
Drill Chucks
Drill Chucks
Hex. Bit Retainer
Collets
Files
In-Line Oiler
In-Line Filter
Speed Regulators
Air Inlet Swivels
Ez-Loc Mandrel
Spindle Adaptors
Ez-Lock Backing Pads
Orbital Sanding Pads
Disc Sanding Pads
Disc Sanding Pads
Eraser Wheels
Mandrel
Lubricant
Oil
Spray Gun Filter
Sanding Blocks
1/4” Square Drive
1/4” Square Drive
3/8” Square Drive
3/8” Square Drive
1/2” Square Drive
1/2” Square Drive
3/4” Square Drive
3/4” Square Drive
1” Square Drive
1” Square Drive
1 1/2 ” Square Drive
1 1/2 ” Square Drive
2 1/2” Square Drive
2 1/2” Square Drive
Spring Type
Quick Change
Small, Reciprocating
Carbon Steel
Beryllium Copper
For Air Hammers
For Sealant Cutters
For Air Hammers
For Air Hammers
Keyed
Keyless
For ¼” Hex. Bits
For Die Grinders
For Reciprocating Saws
1/4” BSP
1/4” BSP
1/4”BSP
1/4” BSP, 3/8” BSP
1/4” Dia. Shank
For Disc Sanders
50mm & 75mm
150mm
125mm & 180mm Plastic
Ribbed Rubber
Standard & Toothed
For Eraser Wheels
Air Tool
Air Compressor
Disposable, In-line
Hand Held
Specifications subject to change without notice. E&OE. ©
3
3
4
4
4
4
4
5
5
5
5
6
6
6
6
7
7
7
7
8
8
8
9
9
9
10
10
11
12
12
12
13
13
14
14
14
15
15
15
15
17
19
19
19
20
20
20
20
21
21
21
21
21
22
22
23
24
25
25
25
25
26
26
ABRASIVES
10 X 330 BELTS
20 X 520 BELTS
3
ABRASIVES
FOR GENERAL PURPOSE
METAL WORK
Used on 10mm belt sanders such as ALLIANCE AL-5010
(page A-18) and SHINANO SI-2700 (page D-24).
Used on 20mm belt sanders such as ALLIANCE AL-5020
(page A-18) and SHINANO SI-2800 (page D-24).
PART NO.
SIZE MM
GRIT
PACK
PART NO.
SIZE MM
GRIT
PACK
AA-10330040
10 x 330
40
10
AA-20520040
20 x 520
40
10
AA-10330060
10 x 330
60
10
AA-20520060
20 x 520
60
10
AA-10330080
10 x 330
80
10
AA-20520080
20 x 520
80
10
AA-10330120
10 x 330
120
10
AA-20520120
20 x 520
120
10
30 X 540 BELTS
50MM QUICK MOUNT DISCS
FOR GENERAL PURPOSE
METAL WORK
FOR GENERAL PURPOSE
METAL WORK
Used on 30mm belt sanders such as SHINANO
SI-2830 (page D-24).
Used on 50mm Quick Change Disc Sanders
such as ALLIANCE AL-1552 (page A-18)
SHINANO SI-2201R (page D-26).
PART NO.
SIZE MM
GRIT
PACK
PART NO.
SIZE MM
GRIT
PACK
AA-30540040
30 x 540
40
10
AA-QMD50024
50Ø
24
10
AA-30540060
30 x 540
60
10
AA-QMD50040
50Ø
40
10
50Ø
60
10
AA-30540080
30 x 540
80
10
AA-QMD50060
AA-30540120
30 x 540
120
10
AA-QMD50080
50Ø
80
10
AA-QMD50120
50Ø
120
10
Specifications subject to change without notice. E&OE. ©
ALLIANCE - ABRASIVES & ACCESSORIES
FOR GENERAL PURPOSE
METAL WORK
L-3
ABRASIVES
75MM QUICK MOUNT DISCS
75 X 110 HOOK & LOOP SHEETS
ABRASIVES
4
ALLIANCE - ABRASIVES & ACCESSORIES
FOR GENERAL
AL PURPOSE
TIMBER WORK
RK
L-4
FOR GENERAL PURPOSE
METAL WORK
Used on Mini Orbital Sanders such as SHINANO
SI-3001A, SI-3011A, SI-3003A and SI-3013A
(pages D-28 & D-29).
Used on 75mm Quick Change Disc Sanders such as ALLIANCE AL-1553
(page A-18) SHINANO SI-2210R (page D-27).
PART NO.
SIZE MM
GRIT
PACK
AA-HLS75110040
75 x 110
40
Each
PART NO.
SIZE MM
GRIT
PACK
AA-HLS75110060
75 x 110
60
Each
AA-QMD75040
Ø75
40
10
AA-HLS75110080
75 x 110
80
Each
AA-QMD75060
Ø75
60
10
AA-HLS75110120
75 x 110
120
Each
AA-QMD75080
Ø75
80
10
AA-HLS75110180
75 x 110
180
Each
AA-QMD75120
Ø75
120
10
AA-HLS75110240
75 x 110
240
Each
AA-HLS75110320
75 x 110
320
Each
50MM HOOK &
LOOP DISCS
75MM HOOK &
LOOP DISCS
FOR GENERAL PURPOSE
SANDING WORK
FOR GENERAL PURPOSE
SANDING WORK
Used on 50mm Sanders such as SHINANO SI2108 and SI-2107A (pages D-29 & D-30).
Used on 75mm Sanders such as ALLIANCE
AL-1554 (see page A-19), SHINANO SI-2009H
(see page D-26) and SI-2110 (page D-30) and
SI-3102 AND SI-3112 (page D-31)
PART NO.
GRIT
PACK
HOOK & LOOP
TRIANGLES
Used on Triangle Pad Sanders such as
SI-3200AS (page D-29).
PART NO.
GRIT
PACK
AA-3200AS040
40
10
AA-2107A060
60
10
AA-2107A080
80
10
PART NO.
GRIT
PACK
AA-3200AS060
60
10
AA-2107A120
120
10
AA-3102040
40
10
AA-3200AS080
80
10
AA-2107A150
150
10
AA-3102060
60
10
AA-3200AS150
150
10
AA-2107A240
240
10
AA-3102080
80
10
AA-3200AS240
240
10
AA-2107A400
400
10
AA-3102120
120
10
AA-2107A600
600
10
AA-3102240
240
10
Specifications subject to change without notice. E&OE. ©
ABRASIVES
75MM QUICK MOUNT DISCS
50MM QUICK MOUNT DISCS
5
ABRASIVES
SURFACE CONDITIONING
2" Surface Conditioning Discs for gasket removal and cleaning of metal
surfaces. Used on 50mm Quick Change Disc Sanders such as ALLIANCE
AL-1552 (page A-18) and SHINANO SI-2201-R (page D-26).
3” Surface Conditioning Discs for gasket removal
and cleaning of metal surfaces. Used on 75mm Quick
Change Disc Sanders such as ALLIANCE AL-1553
(page A-18) and SHINANO SI-2210R (page D-27).
PART NO.
SIZE MM
COLOURS
GRIT
PACK
PART NO.
SIZE MM
COLOURS
GRIT
AA-SCD50BLF
50Ø
Blue
Fine
10
AA-SCD75BLF
75Ø
Blue
Fine
10
AA-SCD50MAM
50Ø
Maroon
Medium
10
AA-SCD75MAM
75Ø
Maroon
Medium
10
AA-SCD50BRC
50Ø
Brown
Coarse
10
AA-SCD75BRC
75Ø
Brown
Coarse
10
AA-205DK
AA-305DK
50MM SURFACE
CONDITIONING DISC KIT
75MM SURFACE
CONDITIONING DISC KIT
INCLUDES BACKING PAD, MANDREL AND
4 SURFACE CONDITIONING DISCS
INCLUDES BACKING PAD, MANDREL AND
4 SURFACE CONDITIONING DISCS
For use on 50mm sanding tools such as ALLIANCE AL-1322
(pageA-10), ALLIANCE AL-1552 (page A-18), SHINANO SI-2005
(see page D-6), SHINANO SI-2006S (page D-6) and SHINANO
SI-2201R (page D-26). Free speed of tools used with this kit must
not exceed 30,000rpm.
Kit includes RD050 50mm Backing Pad, EM4 Mandrel, 2 x blue
50mm discs, 1 x maroon 50mm disc and 1 x brown 50mm disc.
PACK
For use on 75mm sanding tools such as ALLIANCE AL-1553
(page A-18), SHINANO SI-2005 (page D-6), SHINANO
SI-2006S (page D-6), SHINANO SI-2202 (see page D-26) and
SHINANO SI-2210R (page D-27).Free speed of tools used with
this kit must not exceed 20,000rpm.
Kit includes RD075 backing pad, EM4 mandrel, 2 x blue 75mm
discs, 1 x maroon 75mm disc & 1 x brown 75mm disc.
Specifications subject to change without notice. E&OE. ©
ALLIANCE - ABRASIVES & ACCESSORIES
SURFACE CONDITIONING
L-5
ABRASIVES
AA-760908
AA-340-57
AA-C1330-36
ALLIANCE - ABRASIVES & ACCESSORIES
ABRASIVES
6
L-6
75MM CUT-OFF WHEEL
WHEEL THICKNESS
CENTRE HOLE
1.2mm dia.
9.35mm dia.
Used on ALLLIANCE AL-1340 (page A-13) and
SHINANO SI-2033 (page D-16).
30MM GRINDING CUP-WHEEL
CENTRE THREAD
M7 x 0.75
Max operating speed 25000rpm. Used on
SHINANO SI-2050AG (page D-7).
AA-RS2
AA-RS1
100MM CLEAN AND STRIP DISC
50MM GRINDING DISC
CENTRE HOLE
Used on ALLIANCE AL-1330 (page A-6).
AA-RS3
115MM CLEAN AND STRIP DISC
125MM CLEAN AND STRIP DISC
CENTRE HOLE
16mm dia.
CENTRE HOLE
22mm dia.
CENTRE HOLE
MOS
15300 rpm
MOS
13300 rpm
MOS
Used on ALLIANCE AL-1331 (page A-6),
AL-1344 (page A-7), SHINANO SI-2500L
(page D-7), SHINANO SI-250IL (page D-7) and
TOP CAT 400RA4KSR (page E-15).
Specifications subject to change without notice. E&OE. ©
9.6mm dia.
Used on ALLIANCE AL-1335 (page A-6), AL-1336
(page A-19) AL-1344 (page A-7), SHINANO
SI-2505L (page D-8).
22mm dia.
12150 rpm
Used on ALLIANCE AL-1335 (page A-6), AL-1336
(page A-19), SHINANO SI-2505L (page D-8),
SHINANO SI-2515LA (page D-8) and TOP CAT
400RAE2KSR (page E-15)
ABRASIVES
AA-P7712-A1
AA-P7712-A2
7
ABRASIVES
CENTRE HOLE
MOS
16mm dia.
10,000 rpm
Used on ALLIANCE AL-1335 (page A-6), ALLIANCE AL-1336
(page A-9), ALLIANCE AL-1344 (page A-7), SHINANO AL2500L (page D-7) and SHINANO SI-2501L (page D-7).
AA-P7712-A3
100MM WOOL POLISHING & BUFFING DISC
CENTRE HOLE
MOS
16mm dia.
10,000 rpm
Used on ALLIANCE AL-1335 (page A-6), ALLIANCE
AL-1336 (page A-19), ALLIANCE AL-1344 (page A-7),
SHINANO SI-2500L (page D-7) and SHINANO
SI-2501L (page D-7).
100MM CLEAN & STRIP DISC
CENTRE HOLE
MOS
16mm dia.
10,000 rpm
Used on ALLIANCE AL-1335 (page A-6), ALLIANCE AL-1336
(page A-19), ALLIANCE AL-1344 (page A-7), SHINANO SI-2500L
(page D-7) and SHINANO SI-2501L (page D-7).
AA-P7712-A4
100MM FLAP DISC
CENTRE HOLE
MOS
16mm dia.
10,000 rpm
Used on ALLIANCE AL-1335 (page A-6),
ALLIANCE AL-1336 (page A-9), ALLIANCE
AL-1344 (page A-7), SHINANO AL-2500L
(page D-7) and SHINANO SI-2501L (page D-7).
Specifications subject to change without notice. E&OE. ©
ALLIANCE - ABRASIVES & ACCESSORIES
100MM WOVEN CLEANING &
CONDITIONING DISC
L-7
IMPACT SOCKETS
¼” DR. SAE IMPACT SOCKETS
¼” DR. METRIC IMPACT SOCKETS
ALLIANCE - ABRASIVES & ACCESSORIES
IMPACT SOCKETS
8
PART NO.
SIZE
(inches)
SQ. DR.
(inches)
Description
Length
(mm)
PART NO.
SIZE
(mm)
SQ. DR.
(inches)
Description
Length
(mm)
A72005
5/32”
¼”
Std. Impact Socket 6 pt.
25
A82004
4
¼”
Std. Impact Socket 6 pt.
25
A72006
3/16”
¼”
Std. Impact Socket 6 pt.
25
A82045
4.5
¼”
Std. Impact Socket 6 pt.
25
A72007
7/32”
¼”
Std. Impact Socket 6 pt.
25
A82005
5
¼”
Std. Impact Socket 6 pt.
25
A72008
¼”
¼”
Std. Impact Socket 6 pt.
25
A82055
5.5
¼”
Std. Impact Socket 6 pt.
25
A72009
9/32”
¼”
Std. Impact Socket 6 pt.
25
A82006
6
¼”
Std. Impact Socket 6 pt.
25
A72010
5/16”
¼”
Std. Impact Socket 6 pt.
25
A82007
7
¼”
Std. Impact Socket 6 pt.
25
A72011
11/32”
¼”
Std. Impact Socket 6 pt.
25
A82008
8
¼”
Std. Impact Socket 6 pt.
25
A72012
3/8”
¼”
Std. Impact Socket 6 pt.
25
A82009
9
¼”
Std. Impact Socket 6 pt.
25
A72014
7/16”
¼”
Std. Impact Socket 6 pt.
25
A82010
10
¼”
Std. Impact Socket 6 pt.
25
A72016
½”
¼”
Std. Impact Socket 6 pt.
25
A82011
11
¼”
Std. Impact Socket 6 pt.
25
A72018
9/16”
¼”
Std. Impact Socket 6 pt.
25
A82012
12
¼”
Std. Impact Socket 6 pt.
25
A82013
13
¼”
Std. Impact Socket 6 pt.
25
A82014
14
¼”
Std. Impact Socket 6 pt.
25
A82015
15
¼”
Std. Impact Socket 6 pt.
25
¼” DR. IMPACT EXTENSIONS
PART NO.
SIZE
(inches)
SQ. DR.
(inches)
Description
Length
(mm)
PART NO.
SIZE
(mm)
SQ. DR.
(inches)
Description
Length
(mm)
A72104
2”
¼”
Impact Extension
50
A72701
¼”
¼”
Impact Universal Joint
30
A72108
4”
¼”
Impact Extension
100
A72803
¼”
3/8”
Impact Adaptor
30
A72112
6”
¼”
Impact Extension
150
A73208
3/8”
¼”
Impact Adaptor
30
3/8” DR. SAE IMPACT SOCKETS
3/8” DR.METRIC IMPACT SOCKETS
PART NO.
SIZE
(inches)
SQ. DR.
(inches)
Description
Length
(mm)
PART NO.
SIZE
(mm)
SQ. DR.
(inches)
Description
Length
(mm)
A73008
¼”
3/8”
Std. Impact Socket 6 pt.
32
A83006
6
3/8”
Std. Impact Socket 6 pt.
32
A73010
5/16”
3/8”
Std. Impact Socket 6 pt.
32
A83007
7
3/8”
Std. Impact Socket 6 pt.
32
A73012
3/8”
3/8”
Std. Impact Socket 6 pt.
32
A83008
8
3/8”
Std. Impact Socket 6 pt.
32
A73014
7/16”
3/8”
Std. Impact Socket 6 pt.
32
A83009
9
3/8”
Std. Impact Socket 6 pt.
32
A73016
½”
3/8”
Std. Impact Socket 6 pt.
32
A83010
10
3/8”
Std. Impact Socket 6 pt.
32
A73018
9/16”
3/8”
Std. Impact Socket 6 pt.
32
A83011
11
3/8”
Std. Impact Socket 6 pt.
32
A73020
5/8”
3/8”
Std. Impact Socket 6 pt.
32
A83012
12
3/8”
Std. Impact Socket 6 pt.
32
A73022
11/16”
3/8”
Std. Impact Socket 6 pt.
32
A83013
13
3/8”
Std. Impact Socket 6 pt.
32
A73024
¾”
3/8”
Std. Impact Socket 6 pt.
32
A83014
14
3/8”
Std. Impact Socket 6 pt.
32
A73026
13/16”
3/8”
Std. Impact Socket 6 pt.
32
A83015
15
3/8”
Std. Impact Socket 6 pt.
32
A73028
7/8”
3/8”
Std. Impact Socket 6 pt.
32
A83016
16
3/8”
Std. Impact Socket 6 pt.
32
A83017
17
3/8”
Std. Impact Socket 6 pt.
32
A83018
18
3/8”
Std. Impact Socket 6 pt.
32
A83019
19
3/8”
Std. Impact Socket 6 pt.
32
A83020
20
3/8”
Std. Impact Socket 6 pt.
32
A83021
21
3/8”
Std. Impact Socket 6 pt.
32
A83022
22
3/8”
Std. Impact Socket 6 pt.
32
Enquire about Deep Impact Sockets.
L-8
¼” DR. IMPACT ACCESSORIES
Specifications subject to change without notice. E&OE. ©
IMPACT SOCKETS
3/8” DR. IMPACT EXTENSIONS
SIZE
(inches)
SQ. DR.
(inches)
Description
Length
(mm)
PART NO.
FEMALE
SQ. DR.
A73106
3”
3/8”
A73112
6”
3/8”
Impact Extension
75
A73700
3/8”
3/8”
Impact Universal Joint
70
Impact Extension
150
A72803
¼”
3/8”
Impact Adaptor
30
A73120
10”
3/8”
Impact Extension
250
A73208
3/8”
¼”
Impact Adaptor
30
A73216
3/8”
½”
Impact Adaptor
35
A74208
½”
3/8”
Impact Adaptor
40
A73116
-
3/8”
‘O’ Ring / Pin (6 to 14mm)
13
A73117
-
3/8”
‘O’ Ring / Pin (15 to 22mm)
16
1/2" DR. SAE IMPACT SOCKETS
MALE
SQ. DR.
Description
Length
(mm)
½” DR. METRIC IMPACT SOCKETS
SIZE
(inches)
SQ. DR.
(inches)
Description
Length
(mm)
PART NO.
SIZE
(mm)
SQ. DR.
(inches)
Description
Length
(mm)
A74010
5/16”
½”
Std. Impact Socket 6 pt.
38
A84008
8
½”
Std. Impact Socket 6 pt.
38
A74012
3/8”
½”
Std. Impact Socket 6 pt.
38
A84009
9
½”
Std. Impact Socket 6 pt.
38
A74014
7/16”
½”
Std. Impact Socket 6 pt.
38
A84010
10
½”
Std. Impact Socket 6 pt.
38
A74016
½”
½”
Std. Impact Socket 6 pt.
38
A84011
11
½”
Std. Impact Socket 6 pt.
38
A74018
9/16”
½”
Std. Impact Socket 6 pt.
38
A84012
12
½”
Std. Impact Socket 6 pt.
38
A74020
5/8”
½”
Std. Impact Socket 6 pt.
38
A84013
13
½”
Std. Impact Socket 6 pt.
38
A74022
11/16”
½”
Std. Impact Socket 6 pt.
38
A84014
14
½”
Std. Impact Socket 6 pt.
38
A74024
¾”
½”
Std. Impact Socket 6 pt.
38
A84015
15
½”
Std. Impact Socket 6 pt.
38
A74026
13/16”
½”
Std. Impact Socket 6 pt.
38
A84016
16
½”
Std. Impact Socket 6 pt.
38
A74028
7/8”
½”
Std. Impact Socket 6 pt.
38
A84017
17
½”
Std. Impact Socket 6 pt.
38
A74030
15/16”
½”
Std. Impact Socket 6 pt.
43
A84018
18
½”
Std. Impact Socket 6 pt.
38
A74032
1”
½”
Std. Impact Socket 6 pt.
43
A84019
19
½”
Std. Impact Socket 6 pt.
38
A74034
1 1/16”
½”
Std. Impact Socket 6 pt.
43
A84020
20
½”
Std. Impact Socket 6 pt.
38
A74036
1 1/8”
½”
Std. Impact Socket 6 pt.
47
A84021
21
½”
Std. Impact Socket 6 pt.
38
A74038
1 3/16”
½”
Std. Impact Socket 6 pt.
47
A84022
22
½”
Std. Impact Socket 6 pt.
38
A74040
1 ¼”
½”
Std. Impact Socket 6 pt.
47
A84023
23
½”
Std. Impact Socket 6 pt.
43
A84024
24
½”
Std. Impact Socket 6 pt.
43
A84025
25
½”
Std. Impact Socket 6 pt.
43
A84026
26
½”
Std. Impact Socket 6 pt.
43
A84027
27
½”
Std. Impact Socket 6 pt.
43
A84028
28
½”
Std. Impact Socket 6 pt.
48
A84029
29
½”
Std. Impact Socket 6 pt.
48
A84030
30
½”
Std. Impact Socket 6 pt.
48
A84031
31
½”
Std. Impact Socket 6 pt.
48
A84032
32
½”
Std. Impact Socket 6 pt.
48
1/2" DR. IMPACT EXTENSIONS
1/2" DR. IMPACT ACCESSORIES
PART NO.
SIZE
(inches)
SQ. DR.
(inches)
Description
Length
(mm)
PART NO.
FEMALE
SQ. DR.
FEMALE
SQ. DR.
Description
Length
(mm)
A74106
3”
½”
Impact Extension
75mm
A74700
½”
½”
Universal Joint
75
A74112
6”
½”
Impact Extension
150mm
A74707
½”
½”
Universal Joint
100
A74120
10”
½”
Impact Extension
250mm
A73216
3/8”
½”
Impact Adaptor
35
A74208
½”
3/8”
Impact Adaptor
40
A74216
½”
¾”
Impact Adaptor
50
A75208
¾”
½”
Impact Adaptor
60
A74116
-
-
‘O’ Ring / Pin (8 to 16mm)
21
A74117
-
-
‘O’ Ring / Pin (17 to 19mm)
24
A74118
-
-
‘O’ Ring / Pin (20 to 32mm)
24
ALLIANCE - ABRASIVES & ACCESSORIES
PART NO.
9
IMPACT SOCKETS
PART NO.
3/8” DR. IMPACT ACCESSORIES
Enquire about Deep Impact Sockets, Universal Impact Sockets & Impact Socket Sets
Specifications subject to change without notice. E&OE. ©
L-9
IMPACT SOCKETS
¾” DR. SAE IMPACT SOCKETS
¾” DR. METRIC IMPACT SOCKETS
ALLIANCE - ABRASIVES & ACCESSORIES
IMPACT SOCKETS
10
PART NO.
SIZE
(inches)
SQ. DR.
(inches)
Description
Length
(mm)
PART NO.
SIZE
(mm)
SQ. DR.
(inches)
Description
Length
(mm)
A75022
11/16”
¾”
Std. Impact Socket 6 pt.
51
A85017
17
¾”
Std. Impact Socket 6 pt.
51
A75024
¾”
¾”
Std. Impact Socket 6 pt.
51
A85018
18
¾”
Std. Impact Socket 6 pt.
51
A75026
13/16”
¾”
Std. Impact Socket 6 pt.
51
A85019
19
¾”
Std. Impact Socket 6 pt.
51
A75028
7/8”
¾”
Std. Impact Socket 6 pt.
51
A85020
20
¾”
Std. Impact Socket 6 pt.
51
A75030
15/16”
¾”
Std. Impact Socket 6 pt.
51
A85021
21
¾”
Std. Impact Socket 6 pt.
51
A75032
1”
¾”
Std. Impact Socket 6 pt.
54
A85022
22
¾”
Std. Impact Socket 6 pt.
51
A75034
1 1/16”
¾”
Std. Impact Socket 6 pt.
54
A85023
23
¾”
Std. Impact Socket 6 pt.
51
A75036
1 1/8”
¾”
Std. Impact Socket 6 pt.
54
A85024
24
¾”
Std. Impact Socket 6 pt.
51
A75038
1 3/16”
¾”
Std. Impact Socket 6 pt.
54
A85025
25
¾”
Std. Impact Socket 6 pt.
53
A75040
1 ¼”
¾”
Std. Impact Socket 6 pt.
57
A85026
26
¾”
Std. Impact Socket 6 pt.
53
A75042
1 5/16”
¾”
Std. Impact Socket 6 pt.
57
A85027
27
¾”
Std. Impact Socket 6 pt.
53
A75044
1 3/8”
¾”
Std. Impact Socket 6 pt.
57
A85028
28
¾”
Std. Impact Socket 6 pt.
53
A75046
1 7/16”
¾”
Std. Impact Socket 6 pt.
57
A85029
29
¾”
Std. Impact Socket 6 pt.
53
A75048
1 ½”
¾”
Std. Impact Socket 6 pt.
57
A85030
30
¾”
Std. Impact Socket 6 pt.
53
A75050
1 9/16”
¾”
Std. Impact Socket 6 pt.
59
A85031
31
¾”
Std. Impact Socket 6 pt.
57
A75052
1 5/8”
¾”
Std. Impact Socket 6 pt.
59
A85032
32
¾”
Std. Impact Socket 6 pt.
57
A75054
1 11/16”
¾”
Std. Impact Socket 6 pt.
62
A85033
33
¾”
Std. Impact Socket 6 pt.
57
A75056
1 ¾”
¾”
Std. Impact Socket 6 pt.
62
A85034
34
¾”
Std. Impact Socket 6 pt.
57
A75058
1 13/16”
¾”
Std. Impact Socket 6 pt.
62
A85035
35
¾”
Std. Impact Socket 6 pt.
57
A75060
1 7/8”
¾”
Std. Impact Socket 6 pt.
68
A85036
36
¾”
Std. Impact Socket 6 pt.
57
A75062
1 15/16”
¾”
Std. Impact Socket 6 pt.
68
A85037
37
¾”
Std. Impact Socket 6 pt.
57
A75064
2”
¾”
Std. Impact Socket 6 pt.
68
A85038
38
¾”
Std. Impact Socket 6 pt.
57
A85040
40
¾”
Std. Impact Socket 6 pt.
58
A85041
41
¾”
Std. Impact Socket 6 pt.
58
A85042
42
¾”
Std. Impact Socket 6 pt.
58
A85046
46
¾”
Std. Impact Socket 6 pt.
62
A85050
50
¾”
Std. Impact Socket 6 pt.
68
A85054
54
¾”
Std. Impact Socket 6 pt.
72
A85055
55
¾”
Std. Impact Socket 6 pt.
72
A85058
58
¾”
Std. Impact Socket 6 pt.
72
A85060
60
¾”
Std. Impact Socket 6 pt.
72
¾” DR. IMPACT EXTENSIONS
PART NO.
SIZE
(inches)
SQ. DR.
(inches)
Description
Length
(mm)
A75104
4”
¾”
Impact Extension
100
A75107
7”
¾”
Impact Extension
180
A75110
10”
¾”
Impact Extension
255
A75113
13”
¾”
Impact Extension
330
¾” DR. IMPACT ACCESSORIES
PART NO.
FEMALE
SQ. DR.
FEMALE
SQ. DR.
Description
Length
(mm)
A75700
¾”
¾”
Universal Joint
110
A74216
½”
¾”
Impact Adaptor
50
A75208
¾”
½”
Impact Adaptor
60
A75216
¾”
1”
Impact Adaptor
65
A76208
1”
¾”
Impact Adaptor
75
A75116
-
-
‘O’ Ring / Pin (19 to 36mm)
35
A75117
-
-
‘O’ Ring / Pin (37 to 50mm)
42
Enquire about Deep Impact Sockets, Impact Flip Sockets, Universal Impact Sockets & Impact Socket Sets
L-10
Specifications subject to change without notice. E&OE. ©
IMPACT SOCKETS
1” DR. SAE IMPACT SOCKETS
1” DR. METRIC IMPACT SOCKETS
11
SIZE
(inches)
Description
Length
(mm)
PART NO.
SIZE
(mm)
SQ. DR.
(inches)
Description
Length
(mm)
A76024
A76026
3/4”
1”
Std. Impact Socket 6 pt.
58
A86019
19
1”
Std. Impact Socket 6 pt.
58
13/16“
1”
Std. Impact Socket 6 pt.
58
A86020
20
1”
Std. Impact Socket 6 pt.
58
A76028
7/8”
1”
Std. Impact Socket 6 pt.
58
A86021
21
1”
Std. Impact Socket 6 pt.
58
A76030
15/16”
1”
Std. Impact Socket 6 pt.
58
A86022
22
1”
Std. Impact Socket 6 pt.
58
A76032
1”
1”
Std. Impact Socket 6 pt.
60
A86023
23
1”
Std. Impact Socket 6 pt.
58
A76034
1 1/16”
1”
Std. Impact Socket 6 pt.
60
A86024
24
1”
Std. Impact Socket 6 pt.
58
A76036
1 1/8”
1”
Std. Impact Socket 6 pt.
60
A86025
25
1”
Std. Impact Socket 6 pt.
60
A76038
1 3/16”
1”
Std. Impact Socket 6 pt.
64
A86026
26
1”
Std. Impact Socket 6 pt.
60
A76040
1 ¼”
1”
Std. Impact Socket 6 pt.
64
A86027
27
1”
Std. Impact Socket 6 pt.
60
A76042
1 5/16”
1”
Std. Impact Socket 6 pt.
64
A86028
28
1”
Std. Impact Socket 6 pt.
60
A76044
1 3/8”
1”
Std. Impact Socket 6 pt.
64
A86029
29
1”
Std. Impact Socket 6 pt.
64
A76046
1 7/16”
1”
Std. Impact Socket 6 pt.
66
A86030
30
1”
Std. Impact Socket 6 pt.
60
A76048
1 ½”
1”
Std. Impact Socket 6 pt.
66
A86031
31
1”
Std. Impact Socket 6 pt.
64
A76050
1 9/16”
1”
Std. Impact Socket 6 pt.
66
A86032
32
1”
Std. Impact Socket 6 pt.
64
A76052
1 5/8”
1”
Std. Impact Socket 6 pt.
68
A86033
33
1”
Std. Impact Socket 6 pt.
64
A76054
1 11/16”
1”
Std. Impact Socket 6 pt.
70
A86034
34
1”
Std. Impact Socket 6 pt.
64
A76056
1 ¾”
1”
Std. Impact Socket 6 pt.
70
A86035
35
1”
Std. Impact Socket 6 pt.
64
A76058
1 13/16”
1”
Std. Impact Socket 6 pt.
70
A86036
36
1”
Std. Impact Socket 6 pt.
64
A76060
1 7/8”
1”
Std. Impact Socket 6 pt.
76
A86037
37
1”
Std. Impact Socket 6 pt.
66
A76062
1 15/16”
1”
Std. Impact Socket 6 pt.
76
A86038
38
1”
Std. Impact Socket 6 pt.
66
A76064
2”
1”
Std. Impact Socket 6 pt.
76
A86039
39
1”
Std. Impact Socket 6 pt.
66
A76066
2 1/16”
1”
Std. Impact Socket 6 pt.
80
A86040
40
1”
Std. Impact Socket 6 pt.
66
A76068
2 1/8”
1”
Std. Impact Socket 6 pt.
80
A86041
41
1”
Std. Impact Socket 6 pt.
68
A76070
2 3/16”
1”
Std. Impact Socket 6 pt.
84
A86042
42
1”
Std. Impact Socket 6 pt.
68
A76072
2 ¼”
1”
Std. Impact Socket 6 pt.
84
A86043
43
1”
Std. Impact Socket 6 pt.
70
A76074
2 5/16”
1”
Std. Impact Socket 6 pt.
84
A86044
44
1”
Std. Impact Socket 6 pt.
70
A76076
2 3/8”
1”
Std. Impact Socket 6 pt.
89
A86046
46
1”
Std. Impact Socket 6 pt.
72
A76078
2 7/16”
1”
Std. Impact Socket 6 pt.
89
A86048
48
1”
Std. Impact Socket 6 pt.
74
A76080
2 ½”
1”
Std. Impact Socket 6 pt.
89
A86050
50
1”
Std. Impact Socket 6 pt.
76
A76082
2 9/16”
1”
Std. Impact Socket 6 pt.
90
A86052
52
1”
Std. Impact Socket 6 pt.
80
A76084
2 5/8”
1”
Std. Impact Socket 6 pt.
90
A86054
54
1”
Std. Impact Socket 6 pt.
80
A76086
2 11/16”
1”
Std. Impact Socket 6 pt.
92
A86055
55
1”
Std. Impact Socket 6 pt.
84
A76088
2 ¾”
1”
Std. Impact Socket 6 pt.
92
A86058
58
1”
Std. Impact Socket 6 pt.
84
A76090
2 13/16”
1”
Std. Impact Socket 6 pt.
94
A86060
60
1”
Std. Impact Socket 6 pt.
88
A76092
2 7/8”
1”
Std. Impact Socket 6 pt.
94
A86063
63
1”
Std. Impact Socket 6 pt.
90
A76094
2 15/16”
1”
Std. Impact Socket 6 pt.
97
A86065
65
1”
Std. Impact Socket 6 pt.
90
A76096
3”
1”
Std. Impact Socket 6 pt.
100
A86067
67
1”
Std. Impact Socket 6 pt.
90
A76098
3 1/16”
1”
Std. Impact Socket 6 pt.
100
A86070
70
1”
Std. Impact Socket 6 pt.
97
A76100
3 1/8”
1”
Std. Impact Socket 6 pt.
100
A86071
71
1”
Std. Impact Socket 6 pt.
97
A76104
3 ¼”
1”
Std. Impact Socket 6 pt.
100
A86075
75
1”
Std. Impact Socket 6 pt.
97
A76108
3 3/8”
1”
Std. Impact Socket 6 pt.
100
A86076
76
1”
Std. Impact Socket 6 pt.
97
A76112
3 ½”
1”
Std. Impact Socket 6 pt.
100
A86077
77
1”
Std. Impact Socket 6 pt.
97
A76316
3 5/8”
1”
Std. Impact Socket 6 pt.
100
A86080
80
1”
Std. Impact Socket 6 pt.
100
A76120
3 ¾”
1”
Std. Impact Socket 6 pt.
111
A86085
85
1”
Std. Impact Socket 6 pt.
106
A76324
3 7/8”
1”
Std. Impact Socket 6 pt.
111
A86090
90
1”
Std. Impact Socket 6 pt.
108
A76328
4”
1”
Std. Impact Socket 6 pt.
111
A86095
95
1”
Std. Impact Socket 6 pt.
110
A76332
4 1/8”
1”
Std. Impact Socket 6 pt.
111
A860100
100
1”
Std. Impact Socket 6 pt.
115
A76336
4 ¼”
1”
Std. Impact Socket 6 pt.
111
A860105
105
1”
Std. Impact Socket 6 pt.
115
A76340
4 ½”
1”
Std. Impact Socket 6 pt.
114
A860110
110
1”
Std. Impact Socket 6 pt.
115
A860115
115
1”
Std. Impact Socket 6 pt.
125
ALLIANCE - ABRASIVES & ACCESSORIES
SQ. DR.
(inches)
IMPACT SOCKETS
PART NO.
Enquire about Deep Impact Sockets, Universal Impact Sockets, Special Purpose Impact Sockets, Impact Socket Sets, 'O' Rings & Pins
Specifications subject to change without notice. E&OE. ©
L-11
IMPACT SOCKETS
1” DR. IMPACT EXTENSIONS
1” DR. IMPACT ACCESSORIES
ALLIANCE - ABRASIVES & ACCESSORIES
IMPACT SOCKETS
12
PART NO.
SIZE
(inches)
SQ. DR.
(inches)
Description
Length
(mm)
PART NO.
FEMALE
SQ. DR.
MALE
SQ. DR.
Description
Length
(mm)
A76105
4”
1”
Impact Extension
100
A76700
1”
1”
Universal Joint
130
A76107
7”
1”
Impact Extension
180
A75216
¾”
1”
Impact Adaptor
65
A76110
10”
1”
Impact Extension
255
A76208
1”
¾”
Impact Adaptor
75
A76113
13”
1”
Impact Extension
330
A76216
1”
1 ½”
Impact Adaptor
90
A77208
1 ½”
1”
Impact Adaptor
90
A76118
-
-
‘O’ Ring / Pin (19 to 43mm)
55
A76119
-
-
‘O’ Ring / Pin (44 to 80mm)
60
1½” SQ. DR. IMPACT SOCKETS
Description
Length
(mm)
PART NO.
SIZE
(mm)
Equivalent
Size
in inches
SQ. DR.
inches
Description
SIZE
(mm)
Equivalent
Size
in inches
SQ. DR.
inches
A77030
30
1 3/16”
1 ½”
Std. Impact Socket 6 pt.
67
A770667
66.7
2 5/8”
1 ½”
Std. Impact Socket 6 pt.
100
A77032
32
1 ¼”
1 ½”
Std. Impact Socket 6 pt.
67
A77070
70
2 ¾”
1 ½”
Std. Impact Socket 6 pt.
100
A77033
33
1 5/16”
1 ½”
Std. Impact Socket 6 pt.
78
A77075
75
2 15/16”
1 ½”
Std. Impact Socket 6 pt.
105
A77035
35
1 3/8”
1 ½”
Std. Impact Socket 6 pt.
78
A770762
76.2
3”
1 ½”
Std. Impact Socket 6 pt.
110
A77036
36
1.420”
1 ½”
Std. Impact Socket 6 pt.
78
A77080
80
3.150”
1 ½”
Std. Impact Socket 6 pt.
110
A77038
38
1 ½”
1 ½”
Std. Impact Socket 6 pt.
80
A770825
82.5
3 ¼”
1 ½”
Std. Impact Socket 6 pt.
110
A77041
41
1 5/8”
1 ½”
Std. Impact Socket 6 pt.
80
A77085
85
3.350”
1 ½”
Std. Impact Socket 6 pt.
110
A770445
44.5
1 ¾”
1 ½”
Std. Impact Socket 6 pt.
80
A77090
90
3.540”
1 ½”
Std. Impact Socket 6 pt.
112
A77046
46
1 13/16”
1 ½”
Std. Impact Socket 6 pt.
84
A77095
95
3 ¾”
1 ½”
Std. Impact Socket 6 pt.
112
A770476
47.6
1 7/8”
1 ½”
Std. Impact Socket 6 pt.
84
A77100
100
3.940”
1 ½”
Std. Impact Socket 6 pt.
115
101.6
4”
1 ½”
Std. Impact Socket 6 pt.
115
A77050
50
1.970”
1 ½”
Std. Impact Socket 6 pt.
84
A771016
A770508
50.8
2”
1 ½”
Std. Impact Socket 6 pt.
84
A77105
105
4 1/8”
1 ½”
Std. Impact Socket 6 pt.
120
A77052
52
2 1/16”
1 ½”
Std. Impact Socket 6 pt.
84
A77110
110
4.330”
1 ½”
Std. Impact Socket 6 pt.
124
A77054
54
2 1/8”
1 ½”
Std. Impact Socket 6 pt.
84
A77115
115
4.530”
1 ½”
Std. Impact Socket 6 pt.
128
A77055
55
2.170”
1 ½”
Std. Impact Socket 6 pt.
90
A77120
120
4.720”
1 ½”
Std. Impact Socket 6 pt.
132
A770556
55.6
2 3/16”
1 ½”
Std. Impact Socket 6 pt.
90
A77125
125
4.920”
1 ½”
Std. Impact Socket 6 pt.
136
90
A77130
130
5.120”
1 ½”
Std. Impact Socket 6 pt.
140
135
5.310”
1 ½”
Std. Impact Socket 6 pt.
145
A7705715
57.15
2 ¼”
1 ½”
Std. Impact Socket 6 pt.
A77058
58
2.280”
1 ½”
Std. Impact Socket 6 pt.
90
A77135
A77060
60
2.360”
1 ½”
Std. Impact Socket 6 pt.
90
A77140
140
5 ½”
1 ½”
Std. Impact Socket 6 pt.
150
A7706032
60.32
2 3/8”
1 ½”
Std. Impact Socket 6 pt.
95
A77145
145
5.710”
1 ½”
Std. Impact Socket 6 pt.
150
A770635
63.5
2 ½”
1 ½”
Std. Impact Socket 6 pt.
95
A77150
150
5.910”
1 ½”
Std. Impact Socket 6 pt.
155
A77065
65
2 9/16”
1 ½”
Std. Impact Socket 6 pt.
95
1½” DR. IMPACT EXTENSIONS
1½” DR IMPACT ACCESSORIES
PART NO.
SIZE
(inches)
SQ. DR.
(inches)
Description
Length
(mm)
PART NO.
FEMALE
SQ. DR.
MALE
SQ. DR.
Description
A77106
10"
1 ½”
Impact Extension
250
A77700
1 ½”
1 ½”
Universal Joint
180
A77112
15”
1 ½”
Impact Extension
380
A76216
1”
1 ½”
Impact Adaptor
90
A77122
20”
1 ½”
Impact Extension
500
A77208
1 ½”
1”
Impact Adaptor
90
A77216
1 ½”
2 ½”
Impact Adaptor
90
A78208
2 ½”
1 ½”
Impact Adaptor
150
A77116
-
-
‘O’ Ring / Pin (30 to 95mm)
60
A77117
-
-
‘O’ Ring / Pin (95 to 150mm)
70
Enquire about Deep Impact Sockets, Square Head Impact Sockets, Budd Wheel Impact Sockets, Spined Impact Sockets, Socket Sets,
'O' Rings & Pins
L-12
Length
(mm)
PART NO.
Specifications subject to change without notice. E&OE. ©
Length
(mm)
IMPACT SOCKETS
2½” SQ. DR. IMPACT SOCKETS
13
SIZE
(mm)
A78041
41
1 5/8”
2 ½”
A780445
44.5
1 ¾”
2 ½”
A78046
A780476
46
47.6
Equivalent
Size
in inches
1 13/16”
1 7/8”
SQ. DR.
(inches)
2 ½”
2 ½”
Length
(mm)
PART NO.
SIZE
(mm)
Std. Impact Socket 6 pt.
110
A78110
110
4.330”
2 ½”
Std. Impact Socket 6 pt.
155
Std. Impact Socket 6 pt.
114
A78115
115
4.530”
2 ½”
Std. Impact Socket 6 pt.
158
117
A78120
120
4.720”
2 ½”
Std. Impact Socket 6 pt.
160
118
A78125
125
4.920”
2 ½”
Std. Impact Socket 6 pt.
165
130
5.120”
2 ½”
Std. Impact Socket 6 pt.
169
Description
Std. Impact Socket 6 pt.
Std. Impact Socket 6 pt.
Equivalent
Size
in inches
SQ. DR.
(inches)
Description
Length
(mm)
50
1.970”
2 ½”
Std. Impact Socket 6 pt.
118
A780508
50.8
2”
2 ½”
Std. Impact Socket 6 pt.
118
A78135
135
5.310”
2 ½”
Std. Impact Socket 6 pt.
175
A78052
52
2 1/16”
2 ½”
Std. Impact Socket 6 pt.
120
A78140
140
5 ½”
2 ½”
Std. Impact Socket 6 pt.
180
A78054
54
2 1/8”
2 ½”
Std. Impact Socket 6 pt.
120
A78145
145
5.710”
2 ½”
Std. Impact Socket 6 pt.
183
A78055
55
2.170”
2 ½”
Std. Impact Socket 6 pt.
125
A78150
150
5.910”
2 ½”
Std. Impact Socket 6 pt.
192
A78058
58
2.280”
2 ½”
Std. Impact Socket 6 pt.
125
A78155
155
6.100”
2 ½”
Std. Impact Socket 6 pt.
195
125
A78160
160
6.300”
2 ½”
Std. Impact Socket 6 pt.
200
165
6 ½”
2 ½”
Std. Impact Socket 6 pt.
204
A78060
60
2 3/8”
2 ½”
Std. Impact Socket 6 pt.
A780635
63.5
2 ½”
2 ½”
Std. Impact Socket 6 pt.
125
A78165
A78065
65
2 9/16”
2 ½”
Std. Impact Socket 6 pt.
125
A78170
170
6.690”
2 ½”
Std. Impact Socket 6 pt.
207
A78070
70
2 ¾”
2 ½”
Std. Impact Socket 6 pt.
125
A78175
175
6.890”
2 ½”
Std. Impact Socket 6 pt.
211
A78075
75
2 15/16”
2 ½”
Std. Impact Socket 6 pt.
125
A78180
180
7.090”
2 ½”
Std. Impact Socket 6 pt.
217
A78080
80
3.150”
2 ½”
Std. Impact Socket 6 pt.
125
A78185
185
7.280”
2 ½”
Std. Impact Socket 6 pt.
218
A780825
82.5
3 ¼”
2 ½”
Std. Impact Socket 6 pt.
132
A78190
190
7.480”
2 ½”
Std. Impact Socket 6 pt.
220
132
A78200
200
7.870”
2 ½”
Std. Impact Socket 6 pt.
225
210
8.270”
2 ½”
Std. Impact Socket 6 pt.
235
240
A78085
85
3.350”
2 ½”
Std. Impact Socket 6 pt.
A78090
90
3.540”
2 ½”
Std. Impact Socket 6 pt.
132
A78210
A78095
95
3 ¾”
2 ½”
Std. Impact Socket 6 pt.
140
A78215
215
8.460”
2 ½”
Std. Impact Socket 6 pt.
A78100
100
3.940”
2 ½”
Std. Impact Socket 6 pt.
140
A78225
225
8.860”
2 ½”
Std. Impact Socket 6 pt.
250
A781016
101.6
4”
2 ½”
Std. Impact Socket 6 pt.
140
A78235
235
9 ¼”
2 ½”
Std. Impact Socket 6 pt.
260
A78105
105
4 1/8”
2 ½”
Std. Impact Socket 6 pt.
146
2½” SQ. DR. IMPACT EXTENSIONS
2½” SQ. DR. IMPACT ACCESSORIES
PART NO.
SIZE
(inches)
SQ. DR.
(inches)
Description
Length
(mm)
PART NO.
FEMALE
SQ. DR.
MALE
SQ. DR.
Description
Length
(mm)
A78106
10”
2 ½”
Impact Extension
250
A78700
2 ½”
2 ½”
Universal Joint
260
A78112
15”
2 ½”
Impact Extension
380
A77216
1 ½”
2 ½”
Impact Adaptor
90
A78122
20”
2 ½”
Impact Extension
500
A78208
2 ½”
1 ½”
Impact Adaptor
150
A78117
-
-
‘O’ Ring / Pin (41 to 235mm)
80
Specifications subject to change without notice. E&OE. ©
ALLIANCE - ABRASIVES & ACCESSORIES
A78050
A78130
IMPACT SOCKETS
PART NO.
L-13
ACCESSORIES
AA-400-8
AA-5001
ALLIANCE - ABRASIVES & ACCESSORIES
ACCESSORIES
14
L-14
CHISEL RETAINER SPRING
QUICK CHANGE CHISEL RETAINER
Used for retaining chisels on air hammers such
as SHINANO SI-4120A (page D-9), ALLIANCE
AL-4200, AL-4202K (page A-11) and IAT-2511
(page C-5).
TAKES 10.2MM ROUND SHANK CHISELS
LENGTH
70mm
An option to using the 400-8 retaining spring. Has the
added advantage of making it quick and easy to change
from one chisel to another. Used on air hammers such as
SHINANO SI-4120A (page D-9) and ALLIANCE AL-4200 and
AL-4202K (page A-11).
ATC-14P / 18P/ 24P/ 32P
SAN-18 / 24 / 32
SWEDISH BI-METAL
BI METAL BLADES FOR
RECIPROCATING SAWS
BI-METAL BLADES FOR
RECIPROCATING SAWS
PACKS OF 10 BLADES OF SAME TYPE – 18, 24
OR 32 TEETH PER INCH
PACKS OF 10 BLADES OF SAME TYPE - 14, 18, 24
OR 32 TEETH PER INCH
PART NO.
SAN-18P
TPI
18
PACK
PART NO.
TPI
PACK
10
ATC-14P
14
10
18
10
SAN-24P
24
10
ATC-18P
SAN-32P
32
10
ATC-24P
24
10
ATC-32P
32
10
Packs of 10 reciprocating saw blades, made in Sweden. Used on
SHINANO SI-4700B, SI-4710, SI-4730 (page D-34) and ALLIANCE
AL-1781, AL-1782 (page A-24).
Specifications subject to change without notice. E&OE. ©
Packs of 10 reciprocating saw blades in 4 grades of TPI depending on
how fine or fast a cut is required. Used on SHINANO SI-4700B, SI-4710,
SI-4730 (page D-34) and ALLIANCE AL-1781, AL-1782 (page A-24).
ACCESSORIES
NEEDLES FOR NEEDLE SCALERS - STANDARD
15
Flat Tip
Pointed Tip
TAPER FIT / FLAT, CHISEL OR POINTED TIP / 2, 3 OR 4MM DIAMETER
NEEDLE Ø
NEEDLE TYPE
C6000-2FTC
2mm
Flat Tip Carbon Steel
C6000-3FTC
3mm
Flat Tip Carbon Steel
C6000-3CTC
3mm
Chisel Tip Carbon Steel
C6000-3PTC
3mm
Pointed Tip Carbon Steel
C6000-4FTC
4mm
Flat Tip Carbon Steel
C6000-4CTC
4mm
Chisel Tip Carbon Steel
Range of needles for all needle scalers using taper fit heads. Needle diameter
must match the needle holder hole size. Flat tip needles reduce marking on
metal surfaces and can have a polishing effect. Chisel and pointed tip needles
are more aggressive than flat tip needles and cause surface indentation.
They are used where roughening or keying of the surface is required. Used in
SHINANO SI-4150 (page D-15), ALLIANCE AL-6000
(page A-13) and TRELAWNY needle scalers (page I-24 & I-25).
C6000-3FTB
NEEDLES FOR NEEDLE SCALERS – NON SPARKING
TAPER FIT / FLAT TIP / 3MMØ / BERYLLIUM COPPER
Beryllium copper needles are non-sparking which is essential for potentially hazardous areas.
Only available in 3mm diameter and with flat tip. Used in SHINANO SI-4150 (page D-15),
ALLIANCE AL-6000 (page A-13) and TRELAWNY needle scalers (page I-24 & I-25).
H320A
3 0
AA-5000
A
NEEDLE SCALER ATTACHMENT
NEEDLES
19 x 3mm
LENGTH
215mm
0.9kg
WEIGHT
STRAIGHT OFFSET SEALANT BLADE
57MM LONG
Used on sealant knives such as SHINANO
SI-3200AK (page D-36).
Converts an air hammer to a needle scaler for removal
of rust, paint, scale, flux and weld spatter on irregular
surfaces, corners, depressions and hard-to-reach areas. Not
recommended for heavy, extended or industrial use. Used
on air hammers such as SHINANO SI-4120A (page D-9) and
ALLIANCE AL-4200 and AL-4202K (page A-11).
Specifications subject to change without notice. E&OE. ©
ALLIANCE - ABRASIVES & ACCESSORIES
PART NO.
ACCESSORIES
Chisel Tip
L-15
ACCESSORIES
H320B
H320C
H320D
ALLIANCE - ABRASIVES & ACCESSORIES
ACCESSORIES
16
L-16
STRAIGHT OFFSET
SEALANT BLADE
STRAIGHT SEALANT BLADE
DE
90° SEALANT BLADE
90MM LONG
35MM LONG
63MM LONG
Used on sealant knives such as
SHINANO SI-3200AK (page D-36).
Used on sealant knives such as SHINANO SI3200AK (page D-36).
Used on sealant knives such as SHINANO
SI-3200AK (page D-36).
H320E
1
AA-801
115mm long x 30mmØ
A-802
AA-802
165mm long x 32mm wide
90º SEALANT BLADE
TIE ROD TOOL
TAIL PIPE CUTTER
90MM LONG
FOR UNIVERSAL JOINTS / 10.2MM ROUND SHANK
10.2MM ROUND SHANK
Used on sealant knives such as SHINANO
SI-3200AK (page D-36).
Used on air hammers with 10.2mm
round shank such as SHINANO
SI-4120A (page D-9), ALLIANCE
AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page
D-9), ALLIANCE AL-4200, AL-4202K
(page A-11) and IAT-2511(page C-5).
AA-803
803
AA-803J
803J
155mm long x 32mm wide
174mm long x 41mm wide
de
AA-804
04
150mm long x 35mm wide
FORK
FORK
STRAIGHT BUSHING REMOVER
16MM OPENING / 10.2MM ROUND SHANK
BALL JOINT SEPARATOR / 25MM OPENING /
10.2MM ROUND SHANK
10.2MM ROUND SHANK
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Specifications subject to change without notice. E&OE. ©
ACCESSORIES
AA-805
AA-806
AA-807
07
17
166mm long x 13mm
mm wide
152mm long x 17mm wide
BUSHING SPLITTER
SHEET METAL CUTTER
10.2MM ROUND SHANK
10.2MM ROUND SHANK
10.2MM ROUND SHANK
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
AA-808
08
172mm long x 16mm wide
AA-809
09
168mm long x 18mm wide
AA-810
176mm long x 19mm wide
MUFFLER CUTTER
DOUBLE EDGE PANEL CUTTER
FLAT CHISEL
10.2MM ROUND SHANK
10.2MM ROUND SHANK
10.2MM ROUND SHANK
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
AA-811
229mm long x 19mm wide
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
AA-812
168mm long x 13mm dia.
ia.
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
AA-813
152mm long x 20mm wide
FLAT CHISEL
TAPER PUNCH
RIVET CUTTER
10.2MM ROUND SHANK
10.2MM ROUND SHANK
10.2MM ROUND SHANK
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Specifications subject to change without notice. E&OE. ©
ALLIANCE - ABRASIVES & ACCESSORIES
CRANKED WIDE CHISEL
ACCESSORIES
166mm long x 32mm wide
L-17
ACCESSORIES
AA-814
AA-815
180mm long x 13mm dia.
146mm long x 19mm wide
AA-816
16
ALLIANCE - ABRASIVES & ACCESSORIES
ACCESSORIES
18
L-18
146mm long x 19mm wide
BLANK
SPOT WELD BREAKER
SHEET METAL CUTTER
10.2MM ROUND SHANK
10.2MM ROUND SHANK
SINGLE END CUTTER / 10.2MM ROUND SHANK
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
AA-817
127mm long x 33mm dia.
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
AA-818
178mm long x 20mm wide
BUSHING DRIVER
CRANKED FLAT CHISEL
10.2MM ROUND SHANK
10.2MM ROUND SHANK
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
AA-820
820
183mm long x 90mm
m wide
AA-821
102mm long x 30mm dia.
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
81
AA-819
147mm long x 13mm dia.
a.
SHEET METAL PUNCH
10.2MM ROUND SHANK
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
AA-822
148mm long x 9mm dia.
PANEL CRIMPER
SMOOTHING TOOL
STRAIGHT PUNCH
10.2MM ROUND SHANK
10.2MM ROUND SHANK
10.2MM ROUND SHANK
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Specifications subject to change without notice. E&OE. ©
ACCESSORIES
AA-823
AA-824
AA-825
5
19
145mm long x 19mm wide
178mm long x 13mm dia.
a.
SHOCK ABSORBER CHISELL
MOIL POINT
10.2MM ROUND SHANK
10.2MM ROUND SHANK
10.2MM ROUND SHANK
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
AA-PC-1
AA-RC3838L
3838L
AA-RC3838H
3838H
103mm long x 36mm dia.
PITTSBURG TOOL
10.2MM ROUND SHANK
Used on air hammers with 10.2mm round
shank such as SHINANO SI-4120A (page D-9),
ALLIANCE AL-4200, AL-4202K (page A-11) and
IAT-2511(page C-5).
10MM LIGHT DUTY METAL
DRILL CHUCK WITH KEY
10MM HEAVY DUTY METAL
DRILL CHUCK WITH KEY
1-10mm capacity – 3/8”-24 mount
Takes Key No. CK-38L
1-10mm capacity – 3/8”-24 mount
Takes Key No. CK-38H
AA-KL3838
AA-KL1238
13MM LIGHT DUTY METAL DRILL
CHUCK WITH KEY
10MM PLASTIC KEYLESS
DRILL CHUCK
12MM PLASTIC
KEYLESS DRILL CHUCK
1-13mm capacity – 3/8”-24 mount
Takes Key No. CK-12
1-10mm capacity – 3/8”-24 mount
1-12mm capacity – 3/8”-24 mount
AA-RC1238
Specifications subject to change without notice. E&OE. ©
ALLIANCE - ABRASIVES & ACCESSORIES
PAINT SCRAPER
ACCESSORIES
178mm long x 60mm wide
L-19
ACCESSORIES
AA-KP1438M
AA-KP3838M
AA-KP1238M
ALLIANCE - ABRASIVES & ACCESSORIES
ACCESSORIES
20
L-20
6MM HEAVY DUTY METAL
KEYLESS DRILL CHUCK
10MM HEAVY DUTY METAL
KEYLESS DRILL CHUCK
12MM HEAVY DUTY METAL
KEYLESS DRILL CHUCK
0-6mm capacity – 3/8”-24 mount
0-10mm capacity – 3/8”-24 mount
0-12mm capacity – 3/8”-24 mount
AA-100
AA-330-19/24/25/26
24/25
AA-506P-56R
A-506P-56R
178mm long
DIE GRINDER
RINDER COLLETS
RINDE
RETAINER FOR HEX.
SHANK BITS
Takes ¼” hex. screwdriver bits & drill bits 3/8”-24 mount.
AA-506P-56S
Used in die and fan grinders such as SHINANO
(pages D-5, D-6) and ALLIANCE (pages A-9, A-10).
PART NO.
SIZE
AA-330-24
¼”
AA-330-25
1/8”
AA-330-19
6mm
AA-330-26
3mm
AAAA-506P-56T
LE FOR
ROUND FILE
ATING SAW
RECIPROCATING
Used in reciprocating saws that are designed to
take files e.g. SHINANO SI-4710 and SI-4730
(page D-34) and ALLIANCE AL-1782 (page A-24).
AA-5007
07
146mm long x 19mm dia.
178mm long
178mm long
O
IN-LINEE MINI OILER
¼”MBSP / ¼”FBSP
SQUARE FILE FOR
RECIPROCATING SAWS
TRIANGULAR FILE FOR
RECIPROCATING SAW
Used in reciprocating saws that are designed to
take files e.g. SHINANO SI-4710 and SI-4730
(page D-34) and ALLIANCE AL-1782 (page A-24).
Used in reciprocating saws that are designed to
take files e.g. SHINANO SI-4710 and SI-4730
(page D-34) and ALLIANCE AL-1782 (page A-24).
Specifications subject to change without notice. E&OE. ©
Compact oiler which screws directly into any air
tool with a ¼” air inlet. Meters the proper amount of
lubricant to the tool only when the tool is in use. All
internal moving parts are coated and lubricated which
improves torque and overall efficiency and helps
protect the tool from wear and corrosion. The oiler is
refillable with Air Tool Lubricant (page L-25)
ACCESSORIES
AA-5009
AA-5011
AA-5012
21
45mm long x 25mm
mm high
SPEED REGULATOR
¼”MBSP / ¼”FBSP
¼”MBSP / ¼”FBSP
Screws into the air inlet of air tools or spray
guns to catch oil or water droplets and solid
contaminants.
A small valve which screws into the air inlet of
air tools and can be used to throttle the air going
into the tool and thereby control the speed of
the tool.
AA-5922
50mm longg x 32mm high
AA-5923
57mm
m long x 32mm high
FINE ADJUSTMENT SPEED
REGULATOR
¼”MBSP / ¼”FBSP
Similar to AA-5011 but has much finer
adjustment.
AA-EM4
57mm long
¼” AIR INLET SWIVEL
3/8” INLET SWIVEL
EZ-LOK MANDREL
¼”MBSP / ¼”FBSP
3/8”MBSP / 3/8”FBSP
¼” SHANK TO ¼”-20 MALE THREAD
All direction swivelling connector for mounting
between air tool and hose. Reduces operator
fatigue and increases hose life.
Same as AA-5922 but with 3/8” BSP inlet and
outlet for larger tools.
For use in die and fan grinders e.g.
SHINANO (pages D-6) and ALLIANCE
(pages A-9).
D42
D43
D44
SPINDLE ADAPTOR
SPINDLE ADAPTOR
SPINDLE ADAPTOR
7/16”-20F TO ¼”-20M (EZ-LOK)
7/16”- 20F TO SUIT TRIMKUT DISCS
5/8”-11F – M14M
For use on SHINANO SI-2210 (page D-27) to
adapt thread to take EZ-LOK rubber back-up
pads.
For use on SHINANO SI-2210 (page D-27) to
adapt thread to take TRIMKUT discs.
Adapts any tool with 5/8”-11 female spindle to
take backing pads, brushes and abrasives with
M14 x 2.0 male thread.
Specifications subject to change without notice. E&OE. ©
ALLIANCE - ABRASIVES & ACCESSORIES
IN-LINE FILTER
52mm long x 23mm dia.
ACCESSORIES
93mm long
ng x 40mm dia
dia.
L-21
ACCESSORIES
RD050
050
RD075
75
AA-60726
ALLIANCE - ABRASIVES & ACCESSORIES
ACCESSORIES
22
L-22
50MM EZ-LOK RUBBER
BACK-UP PAD
75MM EZ-LOK RUBBER
BACK-UP PAD
150MM ORBITAL SANDING PAD
Back-up pad for quick mount 50mm abrasive
and surface conditioning discs.
Comes with EM4 adaptor. (page L-21)
Max. Operating speed 30 000rpm
Back-up pad for 75mm quick mount abrasive and
surface conditioning discs
Comes with EM4 adaptor (page L-21)
Max. Operating speed 20 000rpm
For use on SHINANO SI-2201R & SI-2202
(page D-26) SI-2005, SI-2006 (page D-6)
alliance AL-1552 (page A-18) and AL-1312
(page A-9).
For use on SHINANO SI-2210R (page D-27)
SI-2202 (page D-26), and ALLIANCE AL-1553
(page A-18), AL-1556 (page A-14) and ALLIANCE
AL-1322 (page A-10).
Fibreglass Backing
Riveted Shaft Plate
9mm Thick Foam
Vinyl Face
6 Hole Pattern
AA-60796
AA-60797
5/16”-24 MALE THREAD
For use on all SHINANO 150mm sanders
(page D-32 & D-33) and ALLIANCE
150mm sanders (pages A-19 & A-20).
AA-60798
150MM ORBITAL SANDING PAD
150MM ORBITAL SANDING PAD
150MM ORBITAL SANDING PAD
5/16”-24 MALE THREAD
5/16”-24 MALE THREAD
5/16”-24 MALE THREAD
Fibreglass Backing
Riveted Shaft Plate
9mm Thick Foam
Hook & Loop Face
6 Hole Pattern
Fibreglass Backing
Riveted Shaft Plate
9mm Thick Foam
Hook & Loop Face
7 Hole Pattern
Fibreglass Backing
Riveted Shaft Plate
9mm Thick Foam
Hook & Loop Face
52 Hole Pattern
For use on all SHINANO 150mm sanders (page
D-32 & D-33) and ALLIANCE 150mm sanders
(pages A-19 & A-20).
For use on all SHINANO 150mm sanders
(page D-32 & D-33) and ALLIANCE 150mm
sanders (pages A-19 & A-20).
For use on all SHINANO 150mm sanders (page
D-32 & D-33) and ALLIANCE 150mm sanders
(pages A-19 & A-20).
Specifications subject to change without notice. E&OE. ©
ACCESSORIES
EZ-6636
EZ-6636K
EZ-6636V
23
ACCESSORIES
150MM ORBITAL SANDING PAD
150MM ORBITAL SANDING PAD
5/16”-24 MALE THREAD
5/16”-24 MALE THREAD
5/16”-24 MALE THREAD
Fully Moulded Construction
7mm thick foam
Vinyl Face
No holes
Made in USA
Fully Moulded Construction
7mm thick foam
Hook & Loop Face
No holes
Made in USA
Fully Moulded Construction
7mm thick foam
Vinyl Face
6 Hole pattern
Made in USA
For use on all SHINANO 150mm sanders
(page D-32 & D-33) and ALLIANCE 150mm
sanders (pages A-19 & A-20).
For use on all SHINANO 150mm sanders
(page D-32 & D-33) and ALLIANCE 150mm
sanders (pages A-19 & A-20).
For use on all SHINANO 150mm sanders
(page D-32 & D-33) and ALLIANCE
150mm sanders (pages A-19 & A-20).
EZ-6636KV
AA-136A-5V
AA-136A-7V
150MM ORBITAL SANDING PAD
125MM SANDING PAD
180MM SANDING PAD
5/16”-24 MALE THREAD
5/8”-11 FEMALE THREAD
5/8”-11 FEMALE THREAD
Fully Moulded Construction
7mm thick foam
Hook & Loop Face
6 Hole pattern
Perimeter Ducts
Made in USA
Plastic Backing
14mm thick foam
Hook & Loop Face
No holes
Plastic Backing
14mm thick foam
Hook & Loop Face
No holes
For use on SHINANO SI-2026 (page D-27).
For use on SHINANO SI-2451
(page D-19) & SI-2351 (page D-27).
For use on all SHINANO 150mm sanders
(page D-32 & D-33) and ALLIANCE 150mm
sanders (pages A-19 & A-20).
Specifications subject to change without notice. E&OE. ©
ALLIANCE - ABRASIVES & ACCESSORIES
150MM ORBITAL SANDING PAD
L-23
ACCESSORIES
RIBBED RUBBER SANDING PADS
24
ALLIANCE - ABRASIVES & ACCESSORIES
ACCESSORIES
MADE IN U.S.A.
L-24
CENTRE NUT
PIN WRENCH
RIBBED RUBBER PADS - SPECIFICATIONS
PRODUCT
CODE
Backing Pads
SP-F400-R10125
100mm (4”) soft rubber, M10x1.25 centre thread
SP-F400-R10150
100mm (4”) soft rubber, M10x1.50 centre thread
SP-H500-14
125mm (5”) rigid, 14mm centre thread, max 10000rpm
SP-RHS500-14
125mm (5”) high speed, 14mm centre thread, max 13000rpm
SP-H500-R
125mm (5”) rigid, 5/8”-11 centre thread, max 10000rpm
Accessories
DESCRIPTION
SP-RHS500-R
125mm (5”) high speed, 5/8”-11 centre thread, max 13000rpm
SP-R700-14
178mm (7”) medium rubber, M14x2.00 centre thread
SP-R700-R
178mm (7”) medium rubber, 5/8”-11 centre thread
SP-R700-RSP14
178mm (7”) medium rubber, splined centre hole for SI-2600L
SP-H900-14
230mm (9”) hard rubber, M14 x 2.00 centre thread
SP-H900-R
230mm (9”) hard rubber, 5/8"-11 centre thread
SP-103-10125
Centre Nut M10 x 1.25 thread
SP-103-10150
Centre Nut M10 x 1.50 thread
SP-102-14
Centre Nut M14 x 2.00 thread
SP-102-58011
Centre Nut 5/8”-11 thread
SP-102SPWR
Pin Wrench for centre nuts
Specifications subject to change without notice. E&OE. ©
ACCESSORIES
406ES
406ET
406EM
25
ACCESSORIES
TOOTHED ERASER WHEEL
ERASER WHEEL MANDREL
5/16”-24 MALE THREAD
5/16”-24 MALE THREAD
¼” SHANK TO 5/16”-24 FEMALE THREAD
Used by automotive painters for removal
of pin stripes before painting. Also erases
marks on plastics and painted surfaces.
Max operating speed 4000rpm. For use on
ALLIANCE AL-1341 (page A-14) or with the
406EM Mandrel, on any straight or pistol
drill of appropriate speed.
Same as 406E but with ‘toothed’ effect
which helps to prevent ‘burning’. Max
operating speed 4000rpm. For use on
ALLIANCE AL-1341 (page A-14) or with the
406EM Mandrel, on any straight or pistol drill
of appropriate speed.
Adapts drill chuck or ¼” collet to Eraser Wheels.
T
AIR TOOL LUBRICANT
COMPRESSOR OIL
REDUCES WEAR / MAINTAINS
PERFORMANCE / AVAILABLE IN
5 SIZES OF BOTTLES
Formulated for better performance and
reduced wear in air tools, air cylinders and
other pneumatic equipment.
32 Grade
FOR SMALL PISTON COMPRESSORS
OMPRESSORS /
AVAILABLE IN 2 SIZES
PART NO.
SIZE
A specially formulated oil for use in small
reciprocating air compressors.
ATL-00250
250ml
46 Grade
ATL-00500
500ml
ATL-01000
1 litre
PART NO.
SIZE
ATL-05000
5 litre
ACO-1000
1 litre
ATL-20000
20 litre
ACO-5000
5 litre
Specifications subject to change without notice. E&OE. ©
ALLIANCE - ABRASIVES & ACCESSORIES
STANDARD ERASER WHEEL
L-25
FINISHING ACCESSORIES
D12-1 / D12-2
SB-1 / SB-3
ALLIANCE - ABRASIVES & ACCESSORIES
FINISHING ACC.
26
L-26
130mm long x 65mm wide x 13mm thick
68mm long x 60mm dia.
DISPOSABLE IN-LINE SPRAY GUN FILTER
HAND SANDING BLOCK / SOFT
FOR DIRECT ATTACHMENT TO SPRAY GUN INLET / ¼”MBSP ¼”FBSP / AVAILABLE INDIVIDUALLY OR IN PACKS OF 2
IDEAL FOR CURVED & IRREGULAR SHAPED SURFACES /
AVAILABLE INDIVIDUALLY OR IN PACKS OF 3
This filter attaches directly to the air inlet of paint spray guns
and helps eliminate painting failures caused by moisture
or oil aerosols which may condense in long lengths of hose
lying on a cool floor downstream of the wall mounted filters.
The hydrophilic synthetic fabric element can absorb up to
30ml of water, and under production spraying conditions, the
recommended change interval is 1 week. Made in USA.
Motor Guard Soft Blocks® are double density blocks that act
as two in one, achieving added efficiency in block sanding of
curved or irregular shaped surfaces. The special surface of
these blocks causes the sandpaper to cling to it and eliminates
the need for adhesives. Use for wet or dry sanding. A genuine
Motor Guard product made in USA.
PART NO.
QTY
PART NO.
QTY
SB-1
1
D12-1
1
SB-3
3
D12-2
2
HT-1 / HT-2
HAND SANDING BLOCK /
PERFORATED / SEMI RIGID
IDEAL FOR CURVED TO FLAT SURFACES /
AVAILABLE INDIVIDUALLY OR IN PACKS OF 2
This quality product is a rugged, semi-rigid, versatile sanding block
designed for flat, medium or curved surfaces. The aggressive side
utilizes durable material, coupled with a hole configuration that enhances
the abrasion action by providing multiple cutting edges, and when used
with a course sand paper creates a ‘cheese grater’ effect. The other side
provides rigidity and a comfortable, easy-to-hold surface, and is used
for less aggressive applications that require some flexibility. Used for
wet or dry sanding. Advantages are: reduced paint prep times, reduced
abrasive consumption and increased paint department productivity.
PART NO.
QTY
HT-1
1
HT-2
2
130mm long x 65mm wide x 20mm thick
* Made in U.S.A.
Specifications subject to change without notice. E&OE. ©
SECTION M
TOOL BALANCERS
1
TECNA
SPRING
BALANCERS
•
TECNA is an Italian manufacturer of a complete range of
tool balancers with capacities ranging from 0.2kg to 180kg.
Models up to 105kg are generally available ex stock whilst
those over 105kg may need to be on indent.
•
Quality tool balancers provide a consistently safer working
environment on assembly lines and work stations by
suspending tools above the work area. This also increases
productivity by reducing idle times, wear and tear on tools,
cables and hoses, and removing trip hazards from leads and
hoses lying on the floor.
•
Two models of TECNA Tool Balancer are available – Those
with an aluminium body and stainless steel wire cable and
those with an aluminium body and retractable air supply
hose. Both of these models are featured on the following
pages. Models which are suitable for explosive environments
can also be supplied against special order.
•
TECNA Tool Balancers have been imported and sold in
Australia for over 15 years. During this period they have
proved to be very reliable. Nevertheless service facilities and
spare parts are available when needed.
CONTENTS TECNA
DESCRIPTION
Hose Balancers
0.75kg – 2.5kg
3
Cable Balancers
1.0kg – 105kg
3
TECNA
CONTENTS
2
PAGE
M-2
Specifications subject to change without notice. E&OE. ©
TOOL BALANCERS
9201
9202
9311
3
TOOL BALANCERS
HOSE BALANCER
HOSE BALANCER
CABLE BALANCER
NCER
0.75 – 1.5KG CAPACITY
1.2 – 2.5KG CAPACITY
0.4 – 1.0KG CAPACITY
TY
HOSE I.D
HOSE LENGTH
MALE COUPLING
WIDTH
HEIGHT
DEPTH
WEIGHT
6mm
1350mm
¼”BSP
145mm
298mm
104mm
1.35kg
9312
HOSE I.D
HOSE LENGTH
MALE COUPLING
WIDTH
HEIGHT
DEPTH
WEIGHT
6mm
1350mm
¼”BSP
145mm
298mm
104mm
1.35kg
9313
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
1600mm
109mm
282mm
55mm
0.6kg
9321
CABLE BALANCER
NCER
CABLE BALANCER
NCER
1.0 – 2.0KG CAPACITY
2.0 – 3.0KG CAPACITY
2.0 – 4.0KG CAPACITY
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
1600mm
109mm
282mm
55mm
0.6kg
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
1600mm
109mm
282mm
55mm
0.7kg
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
149mm
331mm
85mm
2.0kg
Specifications subject to change without notice. E&OE. ©
TECNA
CABLE BALANCER
R
M-3
TOOL BALANCERS
9322
2
9323
9339
TOOL BALANCERS
4
CABLE BALANCER
ALANCER
CABLE BALANCER
ANCER
CABLE BALANCER
4.0 – 6.0KG CAPACITY
APACITY
6.0 – 8.0KG CAPACITY
ACITY
8.0 – 10.0KG CAPACITY
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
149mm
331mm
85mm
2.3kg
TECNA
9340
M-4
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
149mm
331mm
85mm
2.5kg
9362
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2500mm
180mm
381mm
92mm
3.7kg
9363
CABLE BALANCER
CABLE BALANCER
CABLE BALANCER
10.0 – 14.0KG CAPACITY
15.0 – 20.0KG CAPACITY
20.0 – 25.0KG CAPACITY
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2500mm
180mm
381mm
92mm
4.0kg
Specifications subject to change without notice. E&OE. ©
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
240mm
670mm
215mm
10.6kg
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
240mm
670mm
215mm
11.2kg
TOOL BALANCERS
9364
9365
9366
5
TOOL BALANCERS
CABLE BALANCER
CABLE BALANCER
CABLE BALANCER
25.0 – 30.0KG CAPACITY
30.0 – 35.0KG CAPACITY
35.0 – 45.0KG CAPACITY
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
240mm
670mm
215mm
11.5kg
9367
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
240mm
670mm
215mm
11.8kg
9368
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
240mm
670mm
215mm
12.4kg
9369
CABLE BALANCER
CABLE BALANCER
45.0 – 55.0KG CAPACITY
55.0 – 65.0KG CAPACITY
65.0 – 75.0KG CAPACITY
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
240mm
670mm
215mm
12.5kg
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
240mm
670mm
215mm
13.0kg
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
240mm
670mm
215mm
13.6kg
Specifications subject to change without notice. E&OE. ©
TECNA
CABLE BALANCER
M-5
TOOL BALANCERS
9370
9371
TOOL BALANCERS
6
CABLE BALANCER
CABLE BALANCER
75.0 – 90.0KG CAPACITY
90.0 – 105.0KG CAPACITY
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
2000mm
240mm
670mm
250mm
17.3kg
9405
HEIGHT
DEPTH
WEIGHT
2000mm
240mm
670mm
250mm
18.0 kg
9456
CABLE BALANCER
50.0 – 60.0KG CAPACITY
160.0 – 180.0KG CAPACITY
WIDTH
TECNA
WIDTH
CABLE BALANCER
CABLE LENGTH
M-6
CABLE LENGTH
HEIGHT
DEPTH
WEIGHT
2500mm
290mm
750mm
220mm
25.4kg
OPTION B
Pendant Control
OPTION R1
Insulating Swivel
Specifications subject to change without notice. E&OE. ©
CABLE LENGTH
WIDTH
HEIGHT
DEPTH
WEIGHT
3000mm
290mm
750mm
355mm
50 kg
SECTION N
CARBIDE BURRS
DOUBLE CUT 1/4”
SHANK
ALUM. CUT 1/4” SHANK
1
DOUBLE CUT 1/8”
SHANK
BURR KITS
MERCHANDISER
CHIEFTAIN
CARBIDE BURRS
INTRODUCTION
CHIEFTAIN CARBIDE BURRS
INTRODUCTION
2
N-2
•
Made in USA, CHIEFTAIN Carbide Burrs are high quality products available
in a large variety of shapes, diameters and lengths for de-burring and
material removal in most metals. These Burrs are available in Double Cut
and Aluminium Cut versions.
•
The Double Cut burr with “Chisel” tooth shape allows for rapid stock
removal in harder metals. The Chisel tooth not only reduces “chatter” but
produces granular chips in most materials. This eliminates or reduces
the occurrence of sliver chips which are difficult to remove from skin and
clothes.
•
Chip reduction also helps to eliminate loading of the flutes and improve tool
control by reducing the pulling action on the main flute pattern. Although
some reduction in finish may be experienced with this type of cut, improved
material removal and therefore production rates will be realized.
•
CHIEFTAIN Double Cut burrs come with standard or extra long ¼”diameter
shanks, or standard length 1/8” diameter shanks in the case of smaller
sizes. Burrs with ¼” dia. shanks are used in standard size die grinders
and burrs with 1/8” dia. shanks are used in high speed pencil grinders.
The ¼” shank burrs are used for general de-burring and metal removal on
carbon and tool steels, stainless steels, cast iron, titanium and super alloys.
The 1/8” shank burrs are used for de-burring sheet steel, intricate metal
castings, fine die sinking work, engraving etc.
•
CHIEFTAIN Aluminium Cut burrs have wide flutes for easy chip removal and
an advanced relieved cutting edge design for added strength and longer
tool life in the rapid removal of aluminium, brass, zinc alloys, most plastics
and soft non-ferrous metals.
•
When choosing a burr, select the shape which conforms best to your work
piece and maximizes the area of contact between the tool and the material.
Having more of the cutting edge in contact with the material will improve the
final finish.
•
All burrs must have their shank pushed into the collet of the tool as far as
possible to avoid whipping and chatter.
•
Following page N-4 gives an application diagram and speed guide for the
use of burrs.
•
CHIEFTAIN Carbide Burrs have been sold in Australia for over 15 years and
have long since proved their quality and reliability.
Specifications subject to change without notice. E&OE. ©
CONTENTS - CHIEFTAIN CARBIDE BURRS
DESCRIPTION
PAGE
4
Speed Guide
by diameter of head
4
Double Cut 1/4” Shank
Cylindrical
5
Double Cut 1/4” Shank
Cylindrical – End Cut
5
Double Cut 1/4” Shank
Cylindrical – Ball Nose
5
Double Cut 1/4” Shank
Ball Shape
5
Double Cut 1/4” Shank
Egg Shape
6
Double Cut 1/4” Shank
Round Tree
6
Double Cut 1/4” Shank
Pointed Tree
6
Double Cut 1/4” Shank
Flame Shape
6
Double Cut 1/4” Shank
14º Included Angle
6
Double Cut 1/4” Shank
Cone Shape
6
Double Cut 1/4” Shank
Inverted Cone
6
Alum. Cut 1/4” Shank
Cylindrical
7
Alum. Cut 1/4” Shank
Cylindrical – End Cut
7
Alum. Cut 1/4” Shank
Cylindrical – Ball Nose
7
Alum. Cut 1/4” Shank
Ball Shape
7
Alum. Cut 1/4” Shank
Egg Shape
7
Alum. Cut 1/4” Shank
Rounded Tree Shape
7
Alum. Cut 1/4” Shank
14º Included Angle
7
Double Cut 1/8” Shank
Cylindrical
8
Double Cut 1/8” Shank
Cylindrical – Ball Nose
8
Double Cut 1/8” Shank
Ball Shape
8
Double Cut 1/8” Shank
Egg Shape
8
Double Cut 1/8” Shank
Round Tree
8
Double Cut 1/8” Shank
Pointed Tree
8
Double Cut 1/8” Shank
Flame Shape
8
Double Cut 1/8” Shank
8º Included Taper
8
Double Cut 1/8” Shank
Cone Shape
8
Burr Kit
No. 1
9
Burr Kit
No. 6
9
Merchandiser
32 Piece
9
3
CHIEFTAIN CARBIDE BURRS
by shape of head
CONTENTS
Application Guide
Specifications subject to change without notice. E&OE. ©
N-3
CARBIDE BURRS
APPLICATION GUIDE FOR TUNGSTEN CARBIDE BURRS
CHIEFTAIN CARBIDE BURRS
APP. GUIDE / SPEED GUIDE
4
SPEED GUIDE FOR TUNGSTEN CARBIDE BURRS
BURR DIAMETER
Metric
SPEED
Imperial
RPM
1.5mm
1/16”
60,000 – 90,000
3mm
1/8”
40,000 – 70,000
4.7mm
3/16”
35,000 – 60,000
6.3mm
¼”
30,000 – 50,000
8mm
5/16”
20,000 – 40,000
9.5mm
3/8”
20,000 – 40,000
11mm
7/16”
15,000 – 40,000
12.7mm
½”
15,000 – 40,000
16mm
5/8”
12,000 – 25,000
19mm
¾”
10,000 – 20,000
25.4mm
1”
7,500 – 20,000
Long shank burrs should be run at 80% of the above speeds.
N-4
Specifications subject to change without notice. E&OE. ©
BURR PREFIX
HEAD SHAPE
SA
Cylindrical
SB
Cylindrical with End Cut
SC
Cylindrical with Ball Nose
SD
Ball
SE
Egg
SF
Rounded Tree
SG
Pointed Tree
SH
Flame Shape
SL
14º Included Angle
SM
Cone
SN
Inverted Cone
DOUBLE CUT BURRS WITH ¼” SHANK
CYLINDRICAL SHAPE
CYLINDRICAL SHAPE WITH END CUT
5
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SA-11
50mm
¼” (6.35mm)
3mm
12mm
SB-11
50mm
¼” (6.35mm)
3mm
12mm
SA-14
50mm
¼” (6.35mm)
4.7mm
16mm
SB-14
50mm
¼” (6.35mm)
4.7mm
16mm
SA-1
50mm
¼” (6.35mm)
6mm
16mm
SB-1
50mm
¼” (6.35mm)
6mm
16mm
163mm
¼” (6.35mm)
6mm
12.7mm
SB-1XL
163mm
¼” (6.35mm)
6mm
12.7mm
SA-2
63mm
¼” (6.35mm)
8mm
19mm
SB-2
63mm
¼” (6.35mm)
8mm
20mm
SA-3
63mm
¼” (6.35mm)
9.5mm
19mm
SB-3
63mm
¼” (6.35mm)
9.5mm
19mm
SA-3XL
171mm
¼” (6.35mm)
9.5mm
19mm
SB-3XL
171mm
¼” (6.35mm)
9.5mm
19mm
SA-4
68mm
¼” (6.35mm)
11mm
25mm
SB-4
68mm
¼” (6.35mm)
11mm
25mm
SA-5
68mm
¼” (6.35mm)
12.7mm
25mm
SB-5
68mm
¼” (6.35mm)
12.7mm
25mm
SA-5XL
177mm
¼” (6.35mm)
12.7mm
25mm
SB-5XL
177mm
¼” (6.35mm)
12.7mm
25mm
SA-6
68mm
¼” (6.35mm)
16mm
25mm
SB-6
68mm
¼” (6.35mm)
16mm
25mm
SA-7
68mm
¼” (6.35mm)
19mm
25mm
SB-7
68mm
¼” (6.35mm)
19mm
25mm
SA-9
68mm
¼” (6.35mm)
25.4mm
25mm
CYLINDRICAL BALL NOSE
BALL SHAPE
CODE
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SD-11
50mm
¼” (6.35mm)
3mm
2mm
SC-11
50mm
¼” (6.35mm)
3mm
12mm
SD-14
50mm
¼” (6.35mm)
4.7mm
4.5mm
SC-14
50mm
¼” (6.35mm)
4.7mm
16mm
SD-1
50mm
¼” (6.35mm)
6mm
5mm
SC-1
50mm
¼” (6.35mm)
6mm
16mm
SD-1XL
157mm
¼” (6.35mm)
6.3mm
5mm
SC-1XL
163mm
¼” (6.35mm)
6mm
12.7mm
SD-2
50mm
¼” (6.35mm)
8mm
7mm
SC-2
63mm
¼” (6.35mm)
8mm
19mm
SD-3
52mm
¼” (6.35mm)
9.5mm
8mm
SC-3
63mm
¼” (6.35mm)
9.5mm
19mm
SD-3XL
161mm
¼” (6.35mm)
9.5mm
8mm
SC-3XL
171mm
¼” (6.35mm)
9.5mm
19mm
SD-4
52mm
¼” (6.35mm)
11mm
9.5mm
SC-4
68mm
¼” (6.35mm)
11mm
25mm
SD-5
54mm
¼” (6.35mm)
12.7mm
11mm
SC-5
68mm
¼” (6.35mm)
12.7mm
25mm
SD-5XL
164mm
¼” (6.35mm)
12.7mm
11mm
SC-5XL
177mm
¼” (6.35mm)
12.7mm
25mm
SD-6
58mm
¼” (6.35mm)
16mm
14mm
SC-6
68mm
¼” (6.35mm)
16mm
25mm
SD-7
60mm
¼” (6.35mm)
19mm
16mm
SC-7
68mm
¼” (6.35mm)
19mm
25mm
SD-9
68mm
¼” (6.35mm)
25.4mm
24mm
Specifications subject to change without notice. E&OE. ©
CHIEFTAIN CARBIDE BURRS
SA-1XL
DOUBLE CUT - ¼” SHANK
CODE
N-5
DOUBLE CUT BURRS WITH ¼” SHANK
ROUNDED TREE SHAPE
EGG SHAPE
DOUBLE CUT - ¼” SHANK
6
CODE
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SF-1
50mm
¼” (6.35mm)
6mm
19mm
SF-1XL
163mm
¼” (6.35mm)
6mm
13mm
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SE-1
50mm
¼” (6.35mm)
6mm
10mm
SF-3
63mm
¼” (6.35mm)
9.5mm
19mm
SE-1XL
163mm
¼” (6.35mm)
6.3mm
10mm
SF-3XL
171mm
¼” (6.35mm)
9.5mm
19mm
SE-3
60mm
¼” (6.35mm)
9.5mm
16mm
SF-5
68mm
¼” (6.35mm)
12.7mm
25mm
177mm
¼” (6.35mm)
12.7mm
25mm
SE-3XL
168mm
¼” (6.35mm)
9.5mm
16mm
SF-5XL
SE-5
66mm
¼” (6.35mm)
12.7mm
22mm
SF-6
68mm
¼” (6.35mm)
16mm
25mm
SF-7
68mm
¼” (6.35mm)
19mm
25mm
SE-5XL
177mm
¼” (6.35mm)
12.7mm
22mm
SE-6
68mm
¼” (6.35mm)
16mm
25mm
SE-7
68mm
¼” (6.35mm)
19mm
25mm
FLAME SHAPE
CHIEFTAIN CARBIDE BURRS
POINTED TREE SHAPE
N-6
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SH-2
63mm
¼” (6.35mm)
8mm
19mm
SH-2XL
171mm
¼” (6.35mm)
8mm
19mm
SH-5
75mm
¼” (6.35mm)
12.7mm
31mm
SH-5XL
183mm
¼” (6.35mm)
12.7mm
31mm
79mm
¼” (6.35mm)
16mm
36mm
84mm
¼” (6.35mm)
19mm
41mm
SG-1
50mm
¼” (6.35mm)
6mm
19mm
SH-6
SG-1XL
163mm
¼” (6.35mm)
6mm
13mm
SH-7
SG-3
63mm
¼” (6.35mm)
9.5mm
19mm
SG-3XL
171mm
¼” (6.35mm)
9.5mm
19mm
SG-5
68mm
¼” (6.35mm)
12.7mm
25mm
SG-5XL
177mm
¼” (6.35mm)
12.7mm
25mm
SG-6
68mm
¼” (6.35mm)
16mm
25mm
SG-7
68mm
¼” (6.35mm)
19mm
25mm
14° INCLUDED ANGLE
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SL-1
50mm
¼” (6.35mm)
6mm
16mm
SL-1XL
168mm
¼” (6.35mm)
6mm
16mm
SL-2
66mm
¼” (6.35mm)
8mm
22mm
SL-3
71mm
¼” (6.35mm)
9.5mm
27mm
SL-3XL
179mm
¼” (6.35mm)
9.5mm
27mm
SL-4
72mm
¼” (6.35mm)
12.7mm
28mm
CONE SHAPE
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
ANGLE
OF CUT º
SM-1
50mm
¼” (6.35mm)
6mm
12.7mm
22º
SM-2
50mm
¼” (6.35mm)
6mm
18mm
14º
SM-4
60mm
¼” (6.35mm)
9.5mm
16mm
28º
SM-5
66mm
¼” (6.35mm)
12.7mm
22mm
28º
SM-6
68mm
¼” (6.35mm)
16mm
25mm
31º
INVERTED CONE
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
ANGLE
OF CUT
SL-4XL
180mm
¼” (6.35mm)
12.7mm
28mm
SN-1
50mm
¼” (6.35mm)
6mm
8mm
10º
SL-6
76mm
¼” (6.35mm)
16mm
30mm
SN-2
52mm
¼” (6.35mm)
9.5mm
9.5mm
13º
SL-7
82mm
¼” (6.35mm)
19mm
38mm
SN-3
56mm
¼” (6.35mm)
12.7mm
12.7mm
16º
Specifications subject to change without notice. E&OE. ©
ALUMINIUM CUT BURRS WITH ¼” SHANK
CYLINDRICAL
CYLINDRICAL END CUT
7
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SA-1AC
50mm
¼” (6.35mm)
6mm
19mm
SB-1AC
50mm
¼” (6.35mm)
6mm
19mm
SA-3AC
63mm
¼” (6.35mm)
9.5mm
19mm
SB-3AC
63mm
¼” (6.35mm)
9.5mm
19mm
SA-5AC
68mm
¼” (6.35mm)
12.7mm
25mm
SB-5AC
68mm
¼” (6.35mm)
12.7mm
25mm
CYLINDRICAL BALL NOSE
BALL SHAPE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SC-1AC
50mm
¼” (6.35mm)
6mm
19mm
SD-1AC
50mm
¼” (6.35mm)
6mm
5mm
SC-3AC
63mm
¼” (6.35mm)
9.5mm
19mm
SD-3AC
52mm
¼” (6.35mm)
9.5mm
8mm
SC-5AC
68mm
¼” (6.35mm)
12.7mm
25mm
SD-5AC
54mm
¼” (6.35mm)
12.7mm
11mm
EGG SHAPE
ROUNDED TREE SHAPE
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SE-1AC
50mm
¼” (6.35mm)
6mm
10mm
SF-1AC
50mm
¼” (6.35mm)
6mm
19mm
SE-3AC
60mm
¼” (6.35mm)
9.5mm
16mm
SF-3AC
63mm
¼” (6.35mm)
9.5mm
19mm
SE-5AC
66mm
¼” (6.35mm)
12.7mm
22mm
SF-5AC
68mm
¼” (6.35mm)
12.7mm
25mm
14º INCLUDED ANGLE
CODE
OVERALL LENGTH
SHANK DIAMETER
HEAD DIAMETER
FLUTE (CUTTING) LENGTH
SL-1AC
50mm
¼” (6.35mm)
6mm
16mm
SL-3AC
71mm
¼” (6.35mm)
9.5mm
27mm
SL-4AC
72mm
¼” (6.35mm)
12.7mm
28mm
Specifications subject to change without notice. E&OE. ©
CHIEFTAIN CARBIDE BURRS
CODE
ALUMINIUM CUT - ¼” SHANK
For use on aluminium and non-ferrous materials.
N-7
DOUBLE CUT BURRS WITH 1/8” SHANK
CYLINDRICAL – BALL NOSE
CYLINDRICAL
CHIEFTAIN CARBIDE BURRS
DOUBLE CUT - 1/8” SHANK
8
N-8
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SA-42
38mm
1/8” (3.18mm)
2.5mm
11mm
SC-41
38mm
1/8” (3.18mm)
2.5mm
11mm
SA-43
38mm
1/8” (3.18mm)
3mm
14mm
SC-42
38mm
1/8” (3.18mm)
3mm
14mm
SA-51
50mm
1/8” (3.18mm)
6.3mm
12.7mm
SC-51
50mm
1/8” (3.18mm)
6.3mm
12.7mm
CODE
BALL SHAPE
EGG SHAPE
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
CODE
SD-42
38mm
1/8” (3.18mm)
SD-51
43mm
1/8” (3.18mm)
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
3mm
2mm
6.3mm
5mm
SE-41
38mm
1/8” (3.18mm)
3mm
5mm
SE-51
47mm
1/8” (3.18mm)
6.3mm
9.5mm
POINTED TREE SHAPE
ROUND TREE SHAPE
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SF-41
38mm
1/8” (3.18mm)
3mm
6.3mm
SF-42
38mm
1/8” (3.18mm)
3mm
13mm
SF-51
50mm
1/8” (3.18mm)
6.3mm
13mm
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SG-44
38mm
1/8” (3.18mm)
3mm
13mm
SG-51
50mm
1/8” (3.18mm)
6.3mm
13mm
8° INCLUDED TAPER
FLAME SHAPE
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
CODE
OVERALL
LENGTH
SHANK
DIAMETER
HEAD
DIAMETER
FLUTE (CUTTING)
LENGTH
SH-41
38mm
1/8” (3.18mm)
3mm
6mm
SL-41
38mm
1/8” (3.18mm)
3mm
9.5mm
CONE SHAPE
CODE
OVERALL LENGTH
SHANK DIAMETER
HEAD DIAMETER
FLUTE (CUTTING) LENGTH
SM-41
38mm
1/8” (3.18mm)
3mm
8.7mm
12º
SM-43
38mm
1/8” (3.18mm)
3mm
16mm
7º
SM-51
50mm
1/8” (3.18mm)
6.3mm
12.7mm
22º
Specifications subject to change without notice. E&OE. ©
ANGLE OF CUT
BURR KITS & MERCHANDISER
BURR KIT 1
BURR KIT 6
9
BURR KITS & MERCHANDISER
SET OF 8 x ¼” SHANK BURRS
Kit includes SA-42, SA-43, SC-41, SC-42, SD-42, SE-41,
SF-42, SG-44, SH-41, SL-42, SM-43, SN-42
Kit includes SA-5, SC-3, SC-5, SD-5, SF-3, SF-5, SG-3, SL-4
DISPLAY MERCHANDISER
Chieftain merchandiser display stands available for retailers.
Ask for further information.
Specifications subject to change without notice. E&OE. ©
CHIEFTAIN CARBIDE BURRS
SET OF 12 x 1/8” SHANK BURRS
N-9
CHIEFTAIN CARBIDE BURRS
10
N-10
Specifications subject to change without notice. E&OE. ©
SECTION O
SCREW COMPRESSORS
- ELECTRIC
SCREW COMPRESSORS
- DIESEL
SCREW COMPRESSOR
- PETROL
1
PISTON COMPRESSORS
REFRIGERATED
DRYERS
AIR RECEIVERS
PNEUTECH
AIR COMPRESSORS
AIR DRYERS
AIR RECEIVERS
•
The PNEUTECH range of electric, diesel and petrol air
compressors offers a selection of machines to meet most
industrial applications.
•
All compressors are assembled to strict quality standards on air
receivers manufactured to relevant Australian standards.
•
Before dispatch to Customers each compressor is subjected
to a pre-delivery test-run to ensure it is operating according to
specification.
•
PNEUTECH Compressors are backed by service agents in most
industrial areas and a full range of spare parts are held in stock.
•
Each compressor is supplied with a booklet giving detailed
installation and operating instructions.
•
PNEUTECH Air Dryers come as self contained units in several
sizes according to flow capacity.
•
Each Air Dryer comes with detailed installation and operating
instructions.
•
Full installation and service back-up.
CONTENTS - PNEUTECH
TOOLS
PAGE
Screw Compressors
Direct Drive Electric - 2.2kW
5
Screw Compressors
Direct Drive Electric - 3.0kW
6
Screw Compressors
Direct Drive Electric - 4.0kW
7
Screw Compressors
Direct Drive Electric - 5.5kW
9
Screw Compressors
Direct Drive Electric - 7.5kW
10
Screw Compressors
Direct Drive Electric - 11.0 kW
11
Screw Compressors
Direct Drive Electric - 15.0 kW
12
Screw Compressors
Direct Drive Electric - 22.0 kW
13
Screw Compressors
Direct Drive Electric - 30.0 kW
14
Screw Compressors
Direct Drive Electric - 37.0 kW
14
Screw Compressors
Series HD Features
15
Screw Compressors
Series HD Specifications
16
Screw Compressors
Diesel - Series T
17
Screw Compressors
Diesel - Series V
18
Screw Compressors
Petrol - Compact, Portable
19
Piston Compressors
Direct Current Electric
19
Refrigerated Dryers
Free Standing
20
Air Receivers
Vertical
20
PNEUTECH
CONTENTS
2
O-2
Specifications subject to change without notice. E&OE. ©
SCREW COMPRESSORS
WHY ROTARY SCREW?
3
Rotary Screw Compressor
Today’s Technology
Piston Compressor
Yesterday’s Technology
EFFICIENCY
65 - 75%
90 - 95%
SCREW COMPRESSORS
Rotary screw compressors have the following benefits over piston compressors:
• Higher efficiency, up to 33% more air output
• Lower running cost, up to 25% cost reduction
• Up to 100% duty cycle, for continuous running
• Longer life, up to 4 times service life
• Low noise, 68 - 72dBA
• Reliability - less service required
Cost of ownership
Cost of ownership
RUNNING COST
Time
Time
Intermittent - 50%
DUTY CYCLE
Continuous - 100%
Up to 20,000 hours
RUNNING LIFE
Up to 80,000 hours
85 - 95dBA
NOISE
65 - 85dBA
Service every 500 hours
RELIABILITY
Service every 2000 hours
ROTARY SCREW OPERATION
PNEUTECH
Specifications subject to change without notice. E&OE. ©
O-3
SCREW COMPRESSORS - ELECTRIC
SERIES RS - ROTOR SCREW
PNEUTECH
SCREW COMPRESSORS - ELECTRIC
4
The Pneutech Rotor Screw unit is directly coupled to the electric motor, which gives an efficient 100%
power transfer for optimum performances and low running costs. With fewer transmission parts,
maintenance costs are also reduced.
The large air end rotates at a slow 2900rpm which ensures longevity and extra quiet operation. This
makes these units ideally suited for factory units and other areas where noise is critical. Unlike other
screw compressors, Rotor Screws have the unique ability to run intermittently on a stop/start cycle, or
continuously on a 100% duty cycle.
Series RS Features Include:
Pneutech Rotor Screw Compressors Offer: High Quality
Long Life
Low Cost
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
O-4
Specifications subject to change without notice. E&OE. ©
SCREW COMPRESSORS - ELECTRIC
SERIES RS
5
SCREW COMPRESSORS - ELECTRIC
PNEUTECH Series RS Screw Compressors embody thirty years of manufacturing
experience in the field of compressed air.
The PNEUTECH Series RS range consists of single and three phase direct drive electric
screw compressors from 2.2 kW to 37 kW supplied as either base mounted or tank
mounted units, with or without refrigerated dryers.
PNEUTECH RS screw compressors are modern innovative products combining quality,
reliability and special attention to user needs.
Features of the PNEUTECH RS range are:• Large, direct driven, slow running screw units
• Compact modular designs.
• Better efficiency and performance.
• Cheaper operation from lower energy consumption.
• Minimum maintenance requirements.
• High cost effectiveness.
• Manufactured in Italy.
Other PNEUTECH electric compressor models are available in sizes up to 300kW.
RS0300
2.2KW (3.0HP) DIRECT DRIVE
SCREW COMPRESSOR ENCLOSED IN
SILENCING CANOPY AND MOUNTED
ON BASE PLATE
OUTPUT
MAX. PRESS
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
PNEUTECH
POWER
300L/min 10.5cfm
9bar 130psi
2.2kW 3.0HP
240Volt 1ph 11.8 Amps
62dB(A)
½”BSP
850 x 450 x 510mm
45kg
FEATURES:
• Direct coupled motor for greater efficiency
• Spin-on air/oil separator
• Spin-on oil filter
• Fan forced air/oil cooling
• DOL starting
• Pressure switch stop / start control.
DIRECT DRIVE
ONLY 2900 RPM
For Hose & fittings for these compressors see section P, For Air Preparation Units to suit these compressors see section Q.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
O-5
SCREW COMPRESSORS - ELECTRIC
RS0300-T
SCREW COMPRESSORS - ELECTRIC
6
2.2KW (3.0HP) DIRECT DRIVE SCREW
COMPRESSOR ENCLOSED IN SILENCING CANOPY
AND MOUNTED ON HORIZONTAL AIR RECEIVER
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER:
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
300L/min 10.5cfm
9bar 130psi
2.2kW 3.0HP
240Volt 1ph 11.8 Amps
62dB(A)
150 Litres
½”BSP
940 x 550 x 1280mm
80kg
FEATURES
Same features as base mounted model RSO300
but mounted on 150lt air receiver.
Equipped with flexible receiver delivery line and
non-return valve.
DIRECT DRIVE
ONLY 2900 RPM
RS0400
3.0KW (4.0HP) DIRECT DRIVE SCREW
COMPRESSOR ENCLOSED IN SILENCING
CANOPY AND MOUNTED ON BASE PLATE
OUTPUT
MAX. PRESS
POWER
PNEUTECH
SUPPLY:
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
400L/min 14.0cfm
10bar 143psi
3kW 4.0HP
415Volt 3ph 6.3 Amps
62dB(A)
½”BSP
850 x 450 x 510mm
46kg
FEATURES
• Direct coupled motor for greater efficiency
• Spin-on air/oil separator
• Spin-on oil filter
• Fan forced air/oil cooling
• DOL starting
• Pressure switch stop / start control.
DIRECT DRIVE
ONLY 2900 RPM
For Hose & fittings for these compressors see section P, For Air Preparation Units to suit these compressors see section Q.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
O-6
Specifications subject to change without notice. E&OE. ©
SCREW COMPRESSORS - ELECTRIC
RS0400-T
7
SCREW COMPRESSORS - ELECTRIC
3.0KW (4.0HP) DIRECT DRIVE SCREW
COMPRESSOR ENCLOSED IN SILENCING CANOPY
AND MOUNTED ON HORIZONTAL AIR RECEIVER
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
400L/min 14.0cfm
10bar 143psi
3.0Kw 4.0HP
415Volt 3ph 6.3 Amps
62dB(A)
150lt
½”BSP
940 x 550 x 1280mm
82kg
FEATURES
Same features as base mounted model RSO400
but mounted on 150 litre air receiver.
Fitted with flexible receiver delivery line and
non-return valve.
DIRECT DRIVE
ONLY 2900 RPM
RS0550
4.0KW (5.5HP) DIRECT DRIVE SCREW
COMPRESSOR ENCLOSED IN SILENCING
CANOPY AND MOUNTED ON BASE PLATE
OUTPUT
MAX. PRESS
POWER
SUPPLY
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
PNEUTECH
SOUND LEVEL
550L/min 19.2cfm
10bar 143psi
4.0kW 5.5HP
415Volt 3ph 8.0 Amps
70dB(A)
½”BSP
940 x 550 x 850mm
150kg
FEATURES
• Direct coupled motor for greater efficiency
• Spin-on air/oil separator
• Spin-on oil filter
• Fan forced air/oil cooling
• Star-delta starting
• Electronic controller
• On/Off operation.
DIRECT DRIVE
ONLY 2900 RPM
For Hose & fittings for these compressors see section P, For Air Preparation Units to suit these compressors see section Q.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
O-7
SCREW COMPRESSORS - ELECTRIC
RS0550-T
SCREW COMPRESSORS - ELECTRIC
8
4.0KW (5.5HP) DIRECT DRIVE SCREW
COMPRESSOR ENCLOSED IN SILENCING
CANOPY AND MOUNTED ON HORIZONTAL
AIR RECEIVER
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
550L/min 19.2cfm
10bar 143psi
4.0kW 5.5HP
415Volt 3ph 8.0 Amps
70dB(A)
270 Litres
½”BSP
1600 x 550 x 1450mm
200kg
FEATURES
Same features as base mounted model RS0550
but mounted on 270 litre air receiver.
Fitted with flexible receiver delivery line and
non-return valve.
DIRECT DRIVE
ONLY 2900 RPM
RS0550-TR
4.0KW (5.5HP) DIRECT DRIVE
SCREW COMPRESSOR ENCLOSED IN
SILENCING CANOPY AND MOUNTED
WITH REFRIGERATED AIR DRYER ON
HORIZONTAL AIR RECEIVER
PNEUTECH
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER:
AIR OUTLET: ½” BSP
LxWxH
WEIGHT
550L/min 19.2cfm
10bar 143psi
4.0 kW 5.5HP
415Volt 3ph 8.0 Amps
70dB(A)
833Lt/min
270 Litres
½”BSP
1600 x 550 x 1450mm
242kg
FEATURES
Same features as base mounted model RS0550 but
mounted with Air Dryer on 270 litre air receiver.
Fitted with flexible receiver delivery line, non-return
valve and dryer by-pass valve.
DIRECT DRIVE
ONLY 2900 RPM
For Hose & fittings for these compressors see section P, For Air Preparation Units to suit these compressors see section Q.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
O-8
Specifications subject to change without notice. E&OE. ©
SCREW COMPRESSORS - ELECTRIC
RS0750
9
SCREW COMPRESSORS - ELECTRIC
5.5KW (7.5HP) DIRECT DRIVE SCREW
COMPRESSOR ENCLOSED IN SILENCING
CANOPY AND MOUNTED ON BASE PLATE
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
750lt/min 26.2cfm
10bar 143psi
5.5kW 7.5HP
415Volt 3ph 10.8 Amps
70dB(A)
½”BSP
940 x 550 x 850mm
152kg
FEATURES
• Direct coupled motor for greater efficiency
• Spin-on air/oil separator
• Spin-on oil filter
• Fan forced air/oil cooling
• Star-delta starting
• Electronic controller
• On/off operation.
DIRECT DRIVE
ONLY 2900 RPM
RS0750-TR
5.5KW (7.5HP) DIRECT DRIVE
SCREW COMPRESSOR ENCLOSED IN
SILENCING CANOPY AND MOUNTED
WITH REFRIGERATED AIR DRYER ON
HORIZONTAL AIR RECEIVER
OUTPUT
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
750L/min 26.2cfm
10bar 143psi
5.5kW 7.5HP
415Volt 3ph 10.8 Amps
70dB(A)
950Lt/min
270 Litres
½”BSP
1600 x 550 x 1450mm
244kg
PNEUTECH
MAX. PRESS
FEATURES
Same features as base mounted model RS0750
but mounted with Air Dryer on 270 litre air receiver.
Fitted with flexible receiver delivery line, non return
valve and dryer by-pass valve.
NOTE: This model also available without Air Dryer
– order RS0750-T
DIRECT DRIVE
ONLY 2900 RPM
For Hose & fittings for these compressors see section P, For Air Preparation Units to suit these compressors see section Q.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
O-9
SCREW COMPRESSORS - ELECTRIC
RS1000
SCREW COMPRESSORS - ELECTRIC
10
7.5KW (10.0HP) DIRECT DRIVE SCREW
COMPRESSOR ENCLOSED IN SILENCING
CANOPY AND MOUNTED ON BASE PLATE
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
1000L/min 35cfm
10bar 143psi
7.5kW 10.0HP
415Volt 3ph 14.8 Amps
70dB(A)
½”BSP
940 x 550 x 850mm
154kg
FEATURES:
• Direct coupled motor for greater efficiency
• Spin-on air/oil separator
• Spin-on oil filter
• Fan forced air/oil cooling
• Star-delta starting
• Electronic controller
• On/off operation.
DIRECT DRIVE
ONLY 2900 RPM
RS1000-TR
7.5KW (10.0HP) DIRECT DRIVE
SCREW COMPRESSOR ENCLOSED IN
SILENCING CANOPY AND MOUNTED
WITH REFRIGERATED AIR DRYER ON
HORIZONTAL AIR RECEIVER
PNEUTECH
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
1000L/min 35cfm
10bar 143psi
7.5kW 10.0HP
415Volt 3ph 14.8 Amps
70dB(A)
1200Lt/min
270 LItres
½”BSP
1600 x 550 x 1450mm
204kg
FEATURES
Same features as base mounted model RS1000 but
mounted with Air Dryer on 270 litre air receiver.
Fitted with flexible receiver delivery line, non-return
valve and dryer by-pass valve.
NOTE: This model also available without Air Dryer
– order RS1000-T
DIRECT DRIVE
ONLY 2900 RPM
For Hose & fittings for these compressors see section P, For Air Preparation Units to suit these compressors see section Q.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
O-10
Specifications subject to change without notice. E&OE. ©
SCREW COMPRESSORS - ELECTRIC
RS1500
11
SCREW COMPRESSORS - ELECTRIC
11.0KW (15.0HP) DIRECT DRIVE SCREW
COMPRESSOR ENCLOSED IN SILENCING
CANOPY AND MOUNTED ON BASE PLATE
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
1500L/min 54cfm
10bar 143psi
11.0kw 15.0HP
415Volt 3ph 20.8 Amps
70dB(A)
¾” BSP
900 x 680 x 1080mm
180kg
FEATURES:
• Direct coupled motor for greater efficiency
• Spin-on air/oil separator
• Spin-on oil filter
• Fan forced air/oil cooling
• Star-delta starting
• Electronic controller
• On/off operation.
DIRECT DRIVE
ONLY 2900 RPM
RS1500-TR
11.0KW (15HP) DIRECT DRIVE
SCREW COMPRESSOR ENCLOSED IN
SILENCING CANOPY AND MOUNTED
WITH REFRIGERATED AIR DRYER ON
HORIZONTAL AIR RECEIVER
OUTPUT
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
1500L/min 54cfm
10bar 143psi
11.0kW 15.0HP
415Volt 3ph 20.8 Amps
70dB(A)
1800Lt/min
270 Litres
¾”BSP
1600 x 550 x 1450mm
270kg
PNEUTECH
MAX. PRESS
FEATURES
Same features as base mounted model RS1500 but
mounted with Air Dryer on 270 litre air receiver.
Fitted with flexible receiver delivery line, non return
valve and dryer by-pass valve.
NOTE: This model also available without Air Dryer
– order RS1500-T
DIRECT DRIVE
ONLY 2900 RPM
For Hose & fittings for these compressors see section P, For Air Preparation Units to suit these compressors see section Q.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
O-11
SCREW COMPRESSORS - ELECTRIC
RS2000
SCREW COMPRESSORS - ELECTRIC
12
15.0KW (20.0HP) DIRECT DRIVE SCREW
COMPRESSOR ENCLOSED IN SILENCING
CANOPY AND MOUNTED ON BASE PLATE
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
1850L/min 66cfm
10bar 143psi
15.0kW 20.0HP
415Volt 3ph 29.0 Amps
70dB(A)
¾”BSP
900 x 680 x 1080mm
190kg
FEATURES
• Direct coupled motor for greater efficiency
• Spin-on air/oil separator
• Spin-on oil filter
• Fan forced air/oil cooling
• Star-delta starting
• Electronic controller
• On/off operation.
DIRECT DRIVE
ONLY 2900 RPM
RS2000-TR
15.0KW (20.0HP) DIRECT DRIVE
SCREW COMPRESSOR ENCLOSED IN
SILENCING CANOPY AND MOUNTED
WITH REFRIGERATED AIR DRYER ON
HORIZONTAL AIR RECEIVER
PNEUTECH
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
1850L/min 66cfm
10bar 143psi
15.0kW 20.0HP
415Volt 3ph 29.0 Amps
70dB(A)
2500Lt/min
270 Litres
¾”BSP
1600 x 550 x 1450mm
280kg
FEATURES
Same features as base mounted model RS2000 but
mounted with Air Dryer on 270 litre air receiver.
Fitted with flexible receiver delivery line, non-return
valve and dryer by-pass valve.
NOTE: This model also available without Air Dryer
– order RS2000-T
DIRECT DRIVE
ONLY 2900 RPM
For Hose & fittings for these compressors see section P, For Air Preparation Units to suit these compressors see section Q.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
O-12
Specifications subject to change without notice. E&OE. ©
SCREW COMPRESSORS - ELECTRIC
RS3000
13
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
3000L/min 107cfm
10bar 143psi
22.0kW 30.0HP
415Volt 3ph 41.7 Amps
67dB(A)
1”BSP
1150 x 890 x 1270mm
220kg
FEATURES
• Direct coupled motor for greater efficiency
• Spin-on air/oil separator
• Spin-on oil filter
• Fan forced air/oil cooling
• Load / unload operation with timed shutdown
• Star-delta starting
• Electronic controller.
NOTE: Inverter driven version also available
– order RS3000-I
DIRECT DRIVE
SCREW COMPRESSORS - ELECTRIC
22.0KW (30.0HP) DIRECT DRIVE
SCREW COMPRESSOR ENCLOSED IN
SILENCING CABINET AND MOUNTED
ON A BASE FRAME
ONLY 2900 RPM
RS3000-TR
22.0KW (30.0HP) DIRECT DRIVE
SCREW COMPRESSOR ENCLOSED IN
SILENCING CABINET AND MOUNTED
WITH REFRIGERATED AIR DRYER ON
HORIZONTAL AIR RECEIVER
OUTPUT
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET
LxWxH
WEIGHT
3000L/min 107cfm
10bar 143psi
22.0kW 30.0HP
415Volt 3ph 41.7 Amps
67dB(A)
3200lt/min
500 Litres
1”BSP
1960 x 860 x 1980mm
310kg
FEATURES
Same features as base mounted model RS3000 but
mounted with Air Dryer on 500 Litre Air Receiver.
Fitted with receiver delivery line, non return valve and
dryer by-pass valve.
NOTE: Inverter driven version also available
– order RS3000-TRI
DIRECT DRIVE
PNEUTECH
MAX. PRESS
ONLY 2900 RPM
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
O-13
SCREW COMPRESSORS - ELECTRIC
RS4000
SCREW COMPRESSOR - ELECTRIC
14
30.0KW (40.0HP) DIRECT DRIVE SCREW
COMPRESSOR ENCLOSED IN SILENCING
CABINET AND MOUNTED ON A BASE FRAME
OUTPUT
MAX. PRESS
POWER
SUPPLY
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET:
LxWxH
WEIGHT
4000L/Min 151cfm
10bar 143psi
30Kw 40.0HP
415V 3ph 54Amps
70dB(A)
1½”BSP
1750 x 950 x 1650mm
602kg
FEATURES
• Direct coupled motor for greater efficiency
• Spin-on air / oil separator
• Spin-on oil filter
• Fan forced air / oil cooling
• Load / unload operation with timed shutdown
• Star-delta starting
• Electronic controller
NOTE: Inverter driven version also available
– order RS4000-I
DIRECT DRIVE
ONLY 2900 RPM
RS5000
37.0KW (50.0HP) DIRECT DRIVE SCREW
COMPRESSOR ENCLOSED IN SILENCING
CABINET AND MOUNTED ON A BASE FRAME
OUTPUT
MAX. PRESS
POWER
SUPPLY
PNEUTECH
SOUND LEVEL
DRYER
AIR RECEIVER
AIR OUTLET:
LxWxH
WEIGHT
5200L/min 187cfm
10bar 143psi
37.0kW 50.0HP
415Volt 3ph 65Amps
70dB(A)
1½”BSP
1750 x 950 x 1650mm
650kg
FEATURES
• Direct coupled motor for greater efficiency
• Spin-on air/oil separator
• Spin-on oil filter
• Fan forced air/oil cooling
• Load / unload operation with timed shutdown
• Star-delta starting
• Electronic controller.
NOTE: Inverter driven version also available
– order RS5000-I
DIRECT DRIVE
ONLY 2900 RPM
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
O-14
Specifications subject to change without notice. E&OE. ©
SCREW COMPRESSORS - ELECTRIC
SERIES HD
15
PNEUTECH SERIES HD rotary screw compressors are designed for the most
demanding industrial applications.
SCREW COMPRESSORS - ELECTRIC
Featuring quality components such as German made air ends, Regal Beloit electric
motors, Air-Con air valves and Mann oil filters these compressors compare
favourably with the world leaders in terms of performance, service life and economy.
With well dimensioned silenced steel enclosures, quick release panels for fast access
and generously sized filtration units PNEUTECH SERIES HD is also attractive to both
business owners and plant maintenance managers alike.
Designed to deliver continuous operation in Australian climatic conditions PNEUTECH
SERIES HD is ideally suited to heavy duty production situations Australia wide.
SERIES HD Features:
PNEUTECH
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
O-15
SCREW COMPRESSORS - ELECTRIC
SERIES HD
PNEUTECH
SCREW COMPRESSOR - ELECTRIC
16
HD030
HD050
HD060
MODEL
NUMBER
HD075 / HD100
MOTOR
kW
HP
PRESSURE
BAR
PSI
F.A.D.
L/MIN
CFM
DIMENSIONS
WxDxH
WEIGHT
KG
SOUND
dB(A)
OUTLET
BSP
HD030
22
30
8
116
3500
127
1380 x 850 x 1160mm
590
72
1”
HD050
37
50
8
116
6100
215
1600 x 1000 x 1360mm
870
74
1-½”
HD060
45
60
8
116
7300
258
1820 x 1000 x 1360mm
930
76
1-½”
HD075
55
75
8
116
9800
356
2200 x 1360 x 1755mm
1730
77
2”
HD100
75
100
8
116
13000
472
2200 x 1360 x 1755mm
1870
79
2”
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
O-16
Specifications subject to change without notice. E&OE. ©
SCREW COMPRESSORS - DIESEL
SERIES T
17
SCREW COMPRESSORS - DIESEL
Manufactured in Europe to the highest standards PNEUTECH SERIES T diesel powered compressors are
ideal for small to medium portable compressed air requirements in all industries.
With outputs ranging from 3400 to 10000 Litres / Min (120 to 353cfm) and pressures ranging from 7 to
12 bar (102 to 174 psi) these compressors cover a large range of applications.
Each of the four base models is equipped with a specially sized air end to ensure optimum performance,
efficiency and service life.
All models are powered by tried and proven Kubota diesel engines.
OUTPUT
MODEL
No.
PRESSURE
FAD
SOUND
COMPRESSOR OIL
FUEL TANK
AIR OUTLET
Litres
Litres
Gas Thread
Bar
Psi
L/Min
cfm
dBA
T-2607
7
102
3400
120
68
8
55
2 x ¾”
T-3307
7
102
5000
176
68
12
85
1 x 1” 2 x ¾”
T-3310
10
145
4100
145
68
12
85
1 x 1” 2 x ¾”
T-3312
12
174
3400
120
68
12
85
1 x 1” 2 x ¾”
T-4407
7
102
6400
220
68
20
125
1 x 1” 2 x ¾”
T-7507
7
102
10000
353
69
25
125
1 x 1½” 3 x ¾”
T-7510
10
145
8500
300
69
25
125
1 x 1½” 3 x ¾”
T-7512
12
174
7500
265
69
25
125
1 x 1½” 3 x ¾”
MEASUREMENTS & WEIGHTS
MODEL
LENGTH
DRY WEIGHT
mm
WIDTH
mm
mm
kg
WEIGHT WITH FULL TANK
kg
T-2607B Base Mounted
1800
1150
1150
400
450
T-2607T Trailer Mounted
2800
1400
1400
450
500
T-3307B Base Mounted
1800
1150
1150
500
550
T-3307T Trailer Mounted
2800
1400
1400
600
650
T-4407B Base Mounted
2150
1190
1150
850
950
T-4407T Trailer Mounted
3200
1650
1500
1000
1100
T-7507B Base Mounted
2150
1190
1250
1050
1150
T-7507T Trailer Mounted
3200
1650
1600
1200
1300
ENGINES
MODEL
ENGINE
TYPE
CYL.
EMISSIONS
SPEED
POWER
ENGINE OIL
rpm
kW
litres
T-2607
Kubota
V1505 - E3B
4
TIER 4
1500 / 3000
26.2
6
T-3307
Kubota
V1505 - T - E3B
4
TIER 4
1500 / 3000
33
6.7
T-4407
Kubota
V2403 - MT
4
TIER 4
1300 / 2700
44
9.5
T-7507
Kubota
V3800 - MT
4
TIER 3
1300 / 2600
75
13.2
PNEUTECH
HEIGHT
No.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
O-17
SCREW COMPRESSORS - DIESEL
SERIES V
SCREW COMPRESSORS - DIESEL
18
Manufactured in the U.S.A. Pneutech Series V diesel powered compressors are simple, solid, reliable
machines featuring high efficiency, low maintenance air ends to give low operating costs.
Enquire about a compressor from the following selection to meet your requirements.
V185
185 CFM
100 PSI
185 cfm to 1800 cfm
John Deere, Cat and Cummins Engines
3 year Air End Warranty
Truck Mount Models
Offshore Models
TRUCK MOUNT UNIT
185 CFM 100 PSI
High Pressure Portable and Skid
950cfm 350psi to 1150cfm 350psi
V2100
210 CFM
70 - 165 PSI
Instrument Quality Air
375cfm to 1600cfm
Skid Mount Aftercoolers
Skid Mount Dryers and Aftercoolers
Electric Construction Rental Models
50HP to 400HP
OFFSHORE PACK
185 CFM to 1800 CFM
V300
300 CFM
200 PSI
Full line of Pneumatic Tools,
Hoses and Accessories
PNEUTECH
MEDIUM PORTABLE
750 CFM to 900 CFM
V375
375 CFM
150 PSI
AFTERCOOLER / DRYER SKID PACKAGE
LARGE PORTABLE
1300CFM to 1800CFM
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
O-18
Specifications subject to change without notice. E&OE. ©
SCREW COMPRESSORS - PETROL
RS1800-P
19
FREE AIR DELIVERY
1982L/Min 70cfm
6.9BAR 100PSI
5-8BAR 72-125PSI
4litres
Rotary Screw
Dual xpz belts
Honda GX610K1
Air / Oil
Compressor & Engine
RATED PRESSURE
PRESSURE RANGE
OIL CAPACITY
COMPRESSOR
DRIVE
ENGINE
COOLING SYSTEM
FULL SAFETY
SHUTDOWN
ENGINE OUTPUT
12kW 18HP
Electric / Recoil
2200 / 3500
20L
Included
74dB(A) at 7m
135kg
950 x 550 x 635mm
STARTING SYSTEM
ENGINE RPM RANGE
PETROL TANK CAPACITY
LIFTING HOOKS
SOUND LEVEL
DRY WEIGHT
L x W x H WITH HANDLE
DOWN
LENGTH INCL. HANDLE
1400mm
FEATURES
URES
• Latest technology oil injected screw unit
• Continuously variable idle control
• Constant air flow & pressure
• Removable petrol tank for refuelling
• Rugged construction
• Honda V-Twin OHV engine
• Will operate 41kg (90lb) breaker
Ideal for Contractors, Municipalities & Hire
Companies, this compressor overcomes noise
regulations, space limitations, access problems,
avoids road costs yet is powerful enough to
handle a large range of job site requirements.
Its fold-down handle and pneumatic tyres make
it very easy to manoeuvre in and out of site
elevators. A matching small car trailer is also
available as an optional extra.
PISTON COMPRESSORS - D.C. ELECTRIC
DC1041 / DC1049
12 VOLT & 24 VOLT DIRECT CURRENT MINI
AIR COMPRESSORS 100% DUTY CYCLE
MODEL
1041
1049
Voltage
12V DC
24V DC
Maximum Pressure
6.9bar 100psi
6.9bar 100psi
Working Pressure
5.7bar 85psi
5.7bar 85psi
Piston Displacement
72lt/min 2.55cfm
72lt/min 2.55cfm
Motor Power
0.5HP
0.5HP
40amps
20amps
LxWxH
400 x 143 x 200mm
400 x 143 x 200mm
Weight
14.3kg
14.3kg
PNEUTECH
Full Load Current
Reduce lost time from on-site tyre troubles with a compact Pneutech heavy duty
12 or 24 volt D.C. Air Compressor. Small enough to mount under the seat of a motor
grader or on the mudguard of a tractor, these powerful little compressors can get
your tyres back to the correct pressure without that long wait for the service truck.
Pneutech D.C. compressors have also been used for braking systems on small
trucks and utes, automatic lubrication systems and pneumatic gear changes. If you
have an application in mind, one of our sales engineers will be glad to discuss the
installation with you.
Optional Accessory Kit includes:
•
•
•
•
20 litre Air Receiver
Pressure Switch
Pressure Gauge
Safety Valve
•
•
•
•
SCREW COMP. - PETROL / PISTON COMP. - D.C. ELEC.
COMPACT, HAND-PORTABLE
70CFM SCREW COMPRESSOR
WITH HONDA PETROL ENGINE
Drain Plug
Connecting Hose
Hose Fitting
Oil Bottle
For Hose Assemblies & Fittings for the equipment on this page see section P, For Distribution Manifold for the equipment on this page,
see page P-14, For Air Service Units for the equipment on this page see section Q.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
O-19
REFRIGERATED AIR DRYERS
REFRIGERATED AIR DRYERS
REFRIGERATED AIR DRYERS / AIR RECEIVERS
20
The high efficiency ACT (Aluminium Cooling Technology) range of Refrigerated
Dryers features reduced energy consumption, low pressure drop even with load
variences, constant pressure dew point with differing load conditions, minimum
environmental impact and maximum component recyclability.
PART NO.
DESCRIPTION
FLOW RATE
PRESS. DROP
SUPPLY
CONNECTION W x D x H
WEIGHT
ACT03100
Free Standing Refrigerated Dryer
3100L/Min 109cfm
0.15bar 2.2psi
240V 1ph
1–1/4"FBSP
485 x 455 x 825mm
46kg
ACT04000
Free Standing Refrigerated Dryer
4000L/Min 141cfm
0.20bar 2.9psi
240V 1ph
1–1/4"FBSP
485 x 455 x 825mm
50kg
ACT05500
Free Standing Refrigerated Dryer
5500L/Min 194cfm
0.15bar 2.2psi
240V 1ph
1–1/2"FBSP
555 x 580 x 885mm
55kg
ACT08100
Free Standing Refrigerated Dryer
8100L/Min 286cfm
0.09bar 1.3psi
240V 1ph
2"FBSP
555 x 625 x 975mm
92kg
ACT10500
Free Standing Refrigerated Dryer
10500L/Min 371cfm
0.13bar 1.9psi
240V 1ph
2"FBSP
555 x 625 x 975mm
94kg
ACT14500
Free Standing Refrigerated Dryer
14500L/Min 512cfm
0.13bar 1.9psi
240V 1ph
2–1/2"FBSP
685 x 725 x 1105mm
150kg
AIR RECEIVERS
AR515-V
PNEUTECH
AR320-V
VERTICAL COMPRESSED
AIR RECEIVER
NOMINAL VOLUME
DESIGN PRESSURE
OVERALL HEIGHT
INNER DIAMETER
MAX. WIDTH
NOMINAL WEIGHT
COLOUR
320Litres
1100kPa
2298mm
455mm
505mm
150kg
Blue
Manufactured to AS1210 Class 3 Supplied
with Drain, Safety Valve & Pressure Guage.
Other shapes and sizes available.
VERTICAL COMPRESSED
AIR RECEIVER
NOMINAL VOLUME
DESIGN PRESSURE
OVERALL HEIGHT
INNER DIAMETER
MAX. WIDTH
NOMINAL WEIGHT
COLOUR
515Litres
1400kPa
2460mm
570mm
620mm
220kg
Blue
Manufactured to AS1210 Class 3 Supplied
with Drain, Safety Valve & Pressure Guage.
Other shapes and sizes available.
For Hose Assemblies & Fittings for the equipment on this page see section P, For Distribution Manifold for the equipment on this page,
see page P-15, For Air Service Units for the equipment on this page see seciton Q.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
O-20
Specifications subject to change without notice. E&OE. ©
SECTION P
AIR HOSE
AIR HOSE ASSEMBLIES
COIL HOSE
HOSE REELS
QUICK COUPLERS
SWIVEL CONNECTORS
CLAW COUPLINGS
STEEL FITTINGS
BRASS FITTINGS
THREAD TAPE
BALL VALVES
SILENCERS
HOSE CLIPS
HOSE CLAMPS
MANIFOLDS
ALLIANCE
AIR HOSE & FITTINGS
•
ALLIANCE brand air hose is available in various configurations to
cover all needs from the home handyman up to the construction
contractor. Rolls of air hose are available in a large range of inside
diameters and lengths, either with or without fittings.
•
ALLIANCE coil hose is ideal for workstations and benches in
factory and workshop situations where length is needed but the
hose recoils out of the way when not in use. This eliminates trip
hazards as well as helping to maintain a well ordered work area.
•
ALLIANCE and RECOILER retractable hose reels have similar
advantages to coil hose assemblies but provide extra length of
larger diameter hose when required.
•
A full range of various brands of Quick Couplers for air hose is
featured in this section as well as ranges of Swivel Connectors,
Claw Couplings, Brass Fittings, Ball Valves, Silencers, Hose
Clamps, Manifolds and Thread Tape.
CONTENTS - ALLIANCE AIR HOSE & FITTINGS
TOOLS
ALLIANCE AIR HOSE & FITTINGS
CONTENTS
2
P-2
PAGE
Air Hose
Reinforced PVC
3
Air Hose Assemblies
With Quick Couplers
3
Coil Hose
Braided Polyurethane
5
Hose Reels
Retractable, Plastic
5
Hose Reels
Spring Rewind
6
Hose Reels
Air Driven
7
Hose Reels
Hand Crank
7
Quick Couplers
Hy-Flo
8
Quick Couplers
R-Series
8
Quick Couplers
Nitto
9
Quick Couplers
J-Series
9
Quick Couplers
Cejn
10
Quick Couplers
Jopla Plastic
10
Swivel Connectors
UniSwivel
11
Claw Couplings
12
Steel Fittings
12
Brass Fittings
13
Thread Tape
Teflon
Ball Valves
F&F
14
Silencers
Sintered Copper
15
Hose Clips
‘O’ Style
15
Hose Clamps
Worm Drive
15
Air Manifolds
3 port & 5 port
15
Hose Manifold
6 port with gauge
16
Specifications subject to change without notice. E&OE. ©
14
PVC HOSE / HOSE ASSEMBLIES
ROLLS OF HOSE ONLY
3
AUSTRALIAN MADE REINFORCED PVC
HOSE I.D. (MM)
MAXIMUM WORKING
PRESSURE (MPA @ 20ºC)
AH10010
10
1.6
10
AH10020
10
1.6
20
PVC HOSE / HOSE ASSEM.
CODE
COIL LENGTHS (M)
AH10030
10
1.6
30
AH10100
10
1.6
100
AH12020
12
1.6
20
AH12100
12
1.6
100
ROLLS OF HOSE WITH QUICK COUPLERS ATTACHED
AUSTRALIAN MADE REINFORCED PVC HOSE
HOSE I.D. (MM)
COUPLER TYPE
MAXIMUM WORKING
PRESSURE (MPA @ 20ºC)
COIL LENGTHS (M)
AH10010HF
10
HY-FLO
1.6
10
AH10010RF
10
R-SERIES
1.6
10
AH10010NF
10
N-SERIES
1.6
10
AH10010JF
10
J-SERIES
1.6
10
AH10010CF
10
C-SERIES
1.6
10
AH10020HF
10
HY-FLO
1.6
20
AH10020RF
10
R-SERIES
1.6
20
AH10020NF
10
N-SERIES
1.6
20
AH10020JF
10
J-SERIES
1.6
20
AH10020CF
10
C-SERIES
1.6
20
AH10030HF
10
HY-FLO
1.6
30
AH10030RF
10
R-SERIES
1.6
30
AH10030NF
10
N-SERIES
1.6
30
AH10030JF
10
J-SERIES
1.6
30
AH10030CF
10
C-SERIES
1.6
30
AH10100HF
10
HY-FLO
1.6
100
AH10100RF
10
R-SERIES
1.6
100
AH10100NF
10
N-SERIES
1.6
100
AH10100JF
10
J-SERIES
1.6
100
AH10100CF
10
C-SERIES
1.6
100
AH12020HF
12
HY-FLO
1.6
20
AH12020RF
12
R-SERIES
1.6
20
AH12020NF
12
N-SERIES
1.6
20
AH12020JF
12
J-SERIES
1.6
20
AH12020CF
12
C-SERIES
1.6
20
AH12100HF
12
HY-FLO
1.6
100
AH12100RF
12
R-SERIES
1.6
100
AH12100NF
12
N-SERIES
1.6
100
AH12100JF
12
J-SERIES
1.6
100
AH12100CF
12
C-SERIES
1.6
100
Specifications subject to change without notice. E&OE. ©
ALLIANCE AIR HOSE & FITTINGS
CODE
P-3
HOSE ASSEMBLIES
AL-20020CF
ALLIANCE AIR HOSE & FITTINGS
HOSE ASSEMBLIES
4
P-4
HEAVY DUTY RUBBER HOSE
20MM I.D.
HOSE LENGTH
WORKING PRESSURE
20m
300psi
Fitted with Type A claw couplings and clamps.
AL-25020CF
HEAVY DUTY RUBBER HOSE
25MM I.D.
HOSE LENGTH
WORKING PRESSURE
20m
300psi
Fitted with Type A claw couplings and clamps.
Specifications subject to change without notice. E&OE. ©
COIL HOSE
BRAIDED POLYURETHANE COIL HOSE
5
I.D.
O.D.
WORK. PRESS.
BURST PRESS.
COIL O.D.
MATERIAL
LENGTH
WORKING
LENGTH
mm
mm
bar
psi
bar
CH1006
6.5
10
15
213
59
psi
mm
m
m
853
70
6
CH1010
6.5
10
15
213
59
853
4.5
70
10
7.5
CH1505
10
15
15
213
59
853
106
6
4.5
CH1512
10
15
15
213
59
853
106
12
7.5
HOSE REELS
RETRACTABLE HOSE REELS
MADE IN TAIWAN - ¼” BSP
MALE THREAD FITTINGS
CODE
MATERIAL
HOSE DESCRIPTION
HOSE I.D.
HOSE LENGTH
MAX. PRESSURE
WORKING TEMP
AH-1015R
Air / Water
Braided PVC
10mm
15m
17bar 250psi
-5° +45°C
RETRACTABLE HOSE REELS
AUSTRALIAN MADE - ¼” BSP
MALE THREAD FITTINGS
CODE
MATERIAL
HOSE DESCRIPTION
HOSE I.D.
HOSE LENGTH
MAX. PRESSURE
WORKING TEMP
AL-1015R
Air / Water
Braided PVC
10mm
15m
16.5bar 240psi
-5° +65°C
AL-1215R
Air / Water
Braided PVC
12mm
15m
16.5bar 240psi
-5° +65°C
Specifications subject to change without notice. E&OE. ©
ALLIANCE AIR HOSE & FITTINGS
CODE
COIL HOSE / HOSE REELS
FITTED WITH ¼” BSP MALE THREAD FITTINGS
P-5
HOSE REELS
COMPACT SPRING REWIND HOSE REELS
ALLIANCE AIR HOSE & FITTINGS
HOSE REELS
6
P-6
Robust metal hose reels more suitable for demanding applications
than the plastic models. Base and guide arm are formed from
high grade mild or stainless steel shaped for maximum strength.
Also available in a number of versions for use with Air, Water, Oil,
Grease and Welding Gases.
MODEL
CSR10022
HOSE I.D.
HOSE O.D.
HOSE LENGTH
PRESSURE
CONNECTIONS
WEIGHT
mm
mm
m
bar
psi
inlet
outlet
kg
10
18
22
21
300
½”
¼”
23
CSR12015
12
22
15
21
300
½”
3/8”
23
CSR19008
19
31
8
18
250
¾”
¾”
24
HEAVY DUTY SPRING REWIND HOSE REELS
These reels incorporate contemporary design and manufacturing
techniques to guarantee long life and trouble-free performance.
The all-steel frame and drum construction with baked-on
polyester powder coat finish combine to produce a rugged
corrosion resistant product suitable for a wide variety of heavy
duty applications. A four position guide arm allows wall, floor,
ceiling or pit mounting.
MODEL
HOSE I.D.
HOSE O.D.
HOSE LENGTH
PRESSURE
CONNECTIONS
WEIGHT
mm
mm
m
bar
psi
inlet
outlet
kg
HSR10030
10
18
30
21
300
½”
½”
42
HSR12030
12
22
30
21
300
½”
½”
42
HSR19023
19
31
23
18
300
¾”
¾”
43
Specifications subject to change without notice. E&OE. ©
HOSE REELS
AIR DRIVEN HOSE REELS
7
AIR MOTOR DRIVEN REWIND
HOSE REELS
ADR series hose reels are fabricated from heavy gauge steel plate
to ensure rigidity and strength. They are designed for applications
where reliability, longevity and strength are required.
The models listed below are for standard compressed air use. Other
models are available for Lubrication, Watering, Fuel Transfer, High
volume compressed air, Food transfer & Fire fighting.
Hose options range from 12mm I.D. x 45m to 230m long to 50mm
I.D. x 15m to 40m long.
Drive options are: 12VDC, 24VDC, 240VAC, 415VAC, Hydraulic,
Hand Crank & Bevel hand crank.
Material options are: Carbon steel, 316 Stainless steel & Aluminium.
HOSE I.D.
HOSE O.D.
HOSE LENGTH
PRESSURE
CONNECTIONS
mm
mm
m
bar
psi
inlet
outlet
ADR12100
12
22
100
21
300
1½”
½”
ADR12200
12
22
200
21
300
1½”
½”
ADR19100
19
31
100
18
250
1½”
¾”
HAND CRANK REELS
Economy reels for general purpose use involving low to medium pressures.
Numerous other models available for use with air, water or oil.
MODEL
HOSE I.D.
HOSE O.D.
HOSE LENGTH
PRESSURE
CONNECTIONS
mm
mm
m
bar
psi
inlet
outlet
HCR10137
10
18
137
35
500
3/8”
3/8”
HCR12090
12
22
90
69
1000
½”
½”
HCR19046
19
31
46
69
1000
¾”
¾”
Specifications subject to change without notice. E&OE. ©
ALLIANCE AIR HOSE & FITTINGS
MODEL
P-7
QUICK COUPLERS
HY-FLO QUICK COUPLERS
ALLIANCE AIR HOSE & FITTINGS
QUICK COUPLERS
8
P-8
HIGH CAPACITY, LONG LIFE COUPLERS FOR INDUSTRIAL USE
• AUSTRALIAN MADE
• LEAK RESISTANT DESIGN
• HIGH FLOW CAPACITY
MODEL
• HEAVY DUTY STEEL PLUGS
• CASE HARDENED WEAR PARTS IN SOCKETS
PART NUMBER
DESCRIPTION
HOSE TAIL SIZE
AH2SH4
Hose tail socket
6.3mm ¼”
THREAD SIZE
AH2SH5
Hose tail socket
8.0mm 5/16”
AH2SH6
Hose tail socket
9.5mm 3/8”
AH2SH8
Hose tail socket
12.7mm ½”
AH2SF4
Female thread socket
¼”BSP
AH2SM4
Male thread socket
¼”BSP
AH2SM8
Male thread socket
½”BSP
AH2PH4
Hose tail plug
6.3mm ¼”
AH2PH5
Hose tail plug
8.0mm 5/16”
AH2PH6
Hose tail plug
9.5mm 3/8”
AH2PH8
Hose tail plug
12.7mm ½”
AH2PF4
Female thread plug
AH2PM4
Male thread plug
¼”BSP
AH2PM6
Male thread plug
3/8”BSP
¼”BSP
R-SERIES QUICK COUPLERS
MODEL
Specifications subject to change without notice. E&OE. ©
PART NUMBER
DESCRIPTION
HOSE TAIL SIZE
THREAD SIZE
AR1SH4
Hose tail socket
6.3mm ¼”
AR1SH5
Hose tail socket
8.0mm 5/16”
AR1SH6
Hose tail socket
9.5mm 3/8”
AR1SH8
Hose tail socket
12.7mm ½”
AR1SF4
Female thread socket
¼”
AR1SF6
Female thread socket
3/8”
AR1SM4
Male thread socket
¼”
AR1SM6
Male thread socket
3/8”
AR1SM8
Male thread socket
½
AR1PH6
Hose tail plug
9.5mm 3/8”
AR1PH6S
Hose tail Safety Plug
9.5mm 3/8”
AR1PH8
Hose tail plug
12.7mm ½”
AR1PF4
Female thread plug
¼”
AR1PF6
Female thread plug
3/8”
AR1PM4
Male thread plug
¼”
AR1PM6
Male thread plug
3/8”
QUICK COUPLERS
NITTO QUICK COUPLERS
9
MODEL
PART NUMBER
DESCRIPTION
HOSE TAIL SIZE
THREAD SIZE
Hose tail socket
6.3mm ¼”
N200-30SH
Hose tail socket
9.5mm 3/8”
N200-40SH
Hose tail socket
12.7mm ½”
N200-20SF
Female thread socket
¼”
N200-30SF
Female thread socket
3/8”
N200-40SF
Female thread socket
½”
N200-20SM
Male thread socket
¼”
N200-30SM
Male thread socket
3/8”
N200-40SM
Male thread socket
N20PH
Hose tail plug
6.3mm ¼”
N30PH
Hose tail plug
9.5mm 3/8”
N40PH
Hose tail plug
12.7mm ½”
N20PF
Female thread plug
¼”
N30PF
Female thread plug
3/8”
N40PF
Female thread plug
½”
N20PM
Male thread plug
¼”
N30PM
Male thread plug
3/8”
N40PM
Male thread plug
½”
NRL20PM
Swivel plug
¼”
½”
J-SERIES QUICK COUPLERS
• SAFETY LOCKING BUTTONS ON SOCKETS
MODEL
PART NUMBER
DESCRIPTION
HOSE TAIL SIZE
THREAD SIZE
AJ2SH4
Hose tail socket
6.3mm ¼”
AJ2SH5
Hose tail socket
8.0mm 5/16”
AJ2SH6
Hose tail socket
9.5mm 3/8”
AJ2SH8
Hose tail socket
12.7mm ½”
AJ2SM4
Male thread socket
¼”
AJ2SM6
Male thread socket
3/8”
AJ2SM8
Male thread socket
½”
AJ2SF4
Female thread socket
¼”
AJ2SF6
Female thread socket
3/8”
AJ2SF8
Female thread socket
½”
AJ2PH4
Hose tail plug
6.3mm ¼”
AJ2PH5
Hose tail plug
8.0mm 5/16”
AJ2PH6
Hose tail plug
9.5mm 3/8”
AJ2PH8
Hose tail plug
12.7mm ½”
AJ2PF4
Female thread plug
¼”
AJ2PF6
Female thread plug
3/8”
AJ2PM4
Male thread plug
¼”
AJ2PM6
Male thread plug
3/8”
ALLIANCE AIR HOSE & FITTINGS
N200-20SH
QUICK COUPLERS
• GENUINE NITTO PRODUCTS
• MADE IN JAPAN
• ONE TOUCH SOCKETS
Enquire about Alliance N-Series Quick Couplers
Specifications subject to change without notice. E&OE. ©
P-9
QUICK COUPLERS
CEJN QUICK COUPLERS
ALLIANCE AIR HOSE & FITTINGS
QUICK COUPLERS
10
• GENUINE CEJN PRODUCTS
• ONE TOUCH SOCKETS
• SWEDISH MADE
MODEL
PART NUMBER
HOSE TAIL SIZE
THREAD SIZE
Hose tail socket
6.3mm ¼”
103201003
Hose tail socket
8.0mm 5/16”
103201004
Hose tail socket
9.5mm 3/8”
103201005
Hose tail socket
12.7mm ½”
103201202
Female thread socket
¼”BSP
103201204
Female thread socket
3/8” BSP
103201205
Female thread socket
½” BSP
103201152
Male thread socket
¼”BSP
103201154
Male thread socket
3/8”BSP
103201155
Male thread socket
103205002
Hose tail plug
6.3mm ¼”
103205003
Hose tail plug
8.0mm 5/16”
103205004
Hose tail plug
9.5mm 3/8”
103205005
Hose tail plug
12.7mm ½”
103205202
Female thread plug
¼”BSP
103205204
Female thread plug
3/8”BSP
103205205
Female thread plug
½”BSP
103205152
Male thread plug
¼”BSP
103205154
Male thread plug
3/8”BSP
103205155
Male thread plug
½”BSP
½”BSP
JOPLA ES SERIES QUICK COUPLERS - PLASTIC
• LIGHT WEIGHT
• ROBUST AND DURABLE
• ONE TOUCH ACTION
• NON CORROSIVE
• SAFETY LOCKING RING PREVENTS ACCIDENTAL DISCONNECTION
MODEL
Enquire about Alliance C-Series Quick Couplers
P-10
DESCRIPTION
103201002
Specifications subject to change without notice. E&OE. ©
DESCRIPTION
HOSE TAIL SIZE
AP1SH5
PART NUMBER
Hose tail socket
8.0mm 5/16”
THREAD SIZE
AP1SH6
Hose tail socket
9.5mm 3/8”
AP1SH8
Hose tail socket
12.7mm ½”
AP1SM4
Male thread socket
¼”BSP
AP1SM6
Male thread socket
3/8”BSP
AP1SM8
Male thread socket
½”BSP
AP1TSP
Twin type socket
AP1PH5
Hose tail plug
8.0mm 5/16”
AP1PH6
Hose tail plug
9.5mm 3/8”
AP1PH8
Hose tail plug
12.7mm ½”
AP1PM4
Male thread plug
¼”BSP
AP1PM6
Male thread plug
3/8”BSP
AP1PM8
Male thread plug
½”BSP
AP1PF4
Female thread plug
¼”BSP
SWIVEL CONNECTORS
UNISWIVEL
11
UniSwivel is an internationally patented multi-directional, swivelling hose connector with versions available for
use with air, water, glue, paint, oil, resin, gel coat, petroleum, distillate, solvents and thick food products.
Industries where UniSwivel is used include Manufacturing, Construction, Mining, Petroleum, Oil & Gas and all
the fields of maintenance and repair in the Automotive, Road Transport, Railway, Shipping, Foundry & Defence
Industries.
Free Rotation 90º
UniSwivel is particularly useful in facilitating the manipulation of hoses in Spray Painting, at Petroleum Pumps
and in Fire Fighting.
Advantages of UniSwivel are:
• COST SAVING: No more premature wear of the supply hose to the tool or machine
• EASE OF USE: Less strain due to the rigidity of the hose. Makes work easier in hard-to-access areas.
• COMFORT: No rolling up of the supply hose, which can now be ideally positioned.
• ERGONOMIC: Less strain reduces the risk of Tendinitis.
Free Rotation 360º
The following table gives details of the UniSwivel models designed for use with compressed air:
INTERNAL PASSAGE
Ø7MM
US06
A
Ø24
INTERNAL PASSAGE - Ø16MM
US10
US20
US12
US25
Ø29.5
Ø46
B
67
C
¼”FBSP Thread
3/8”FBSP Thread
82
½” FBSP Thread
¾”FBSP Thread
98
1” FBSP Thread
D
¼”MBSP Thread
3/8”MBSP Thread
½” MBSP Thread
¾”MBSP Thread
1” MBSP Thread
Weight
79g
126g
132g
374g
358g
Recommended
Flow
720lt/min
25cfm
1800lt/min
64cfm
3120lt/min
110cfm
Nominal pressure: 10bar
Operating temperature: -10º, +70ºC
Dimensions are given in mm and subject to change
ALLIANCE AIR HOSE & FITTINGS
Male - Female connectors
Recommended use: Connections
for applications using air, fluids.
Reference
INTERNAL PASSAGE - Ø11MM
SWIVEL CONNECTORS
Manufactured from stainless steel or aluminium UniSwivel models range from 4mm passage diameter with
630 bar operating pressure to 65mm passage diameter with 20 bar operating pressure.
Greater Tool Movement with UniSwivel
Specifications subject to change without notice. E&OE. ©
P-11
CLAW COUPLINGS / STEEL FITTINGS
CLAW COUPLINGS
ALLIANCE AIR HOSE & FITTINGS
CLAW COUPL. / STEEL FIT.
12
P-12
• HEAVY DUTY STEEL FITTINGS FOR INDUSTRIAL AND CONSTRUCTION USE
MODEL
PART NUMBER
DESCRIPTION
HOSE SIZE
THREAD SIZE
CHT12
Hose Tail Coupling
½”
CHT20
Hose tail coupling
¾”
CHT25
Hose tail coupling
1”
CFT10
Female thread coupling
3/8”BSP
CFT12
Female thread coupling
½”BSP
CFT20
Female thread coupling
¾”BSP
CFT25
Female thread coupling
1”BSP
CMT10
Male thread coupling
3/8”BSP
CMT12
Male thread coupling
½”BSP
CMT20
Male thread coupling
¾”BSP
CMT25
Male thread coupling
1”BSP
CC3W1
3-Way Coupling
CCC12
Claw Clamp
½”
CC20
Claw clamp
¾”
CCC25
Claw clamp
1”
CSLP1
Safety locking pin
STEEL FITTINGS
• HEAVY DUTY STEEL FITTINGS FOR INDUSTRIAL AND CONSTRUCTION USE
MODEL
PART NO.
SMTS10
Specifications subject to change without notice. E&OE. ©
DESCRIPTION
Gal. Steel Male Thread Hose Tail
HOSE TAIL SIZE
3/8”
THREAD SIZE
3/8”
SMTS15
Gal. Steel Male Thread Hose Tail
½”
½”
SMTS20
Gal. Steel Male Thread Hose Tail
¾”
¾”
SSBS25
Gal. Steel Reducing Bush
SSBS20
Gal. Steel Reducing Bush
¾” to ½” BSP
SSBS12
Gal. Steel Reducing Bush
½” to ¼” BSP
SSNS25
Gal. Steel Nipple
1” BSP
SSNS20
Gal. Steel Nipple
¾” BSP
SSNS12
Gal. Steel Nipple
½” BSP
SRNS25
Gal. Steel Reducing Nipple
1” to ¾” BSP
SRNS20
Gal. Steel Reducing Nipple
¾” to ½” BSP
SRNS12
Gal. Steel Reducing Nipple
½” to 3/8” BSP
SSSS25
Gal. Steel Socket
1” BSP
SSSS20
Gal. Steel Socket
¾” BSP
SSSS12
Gal. Steel Socket
½” BSP
1” to ¾” BSP
BRASS FITTINGS
NO.24
NO.25
REDUCING BUSH
MALE &
FEMALE
CAST ELBOW
MALE B.S.P.
13
HEXAGON
SOCKET
FEMALE B.S.P.
NO241418
¼”
NO243814
3/8”
¼’”
NO241214
½”
¼”
NO243414
¾”
¼”
PART NUMBER
NO241238
½”
3/8”
NO25C1414
¼”
¼”
NO2614
NO243438
¾”
3/8”
NO25C3838
3/8”
3/8”
NO2638
3/8”
NO243412
¾”
½”
NO25C1212
½”
½”
NO2612
½”
NO241012
1”
½”
NO25C3434
¾”
¾”
NO2634
¾”
NO241034
1”
¾”
NO25C1010
1”
1”
NO2610
1”
1/8”
MALE B.S.P.
FEMALE B.S.P.
NO.29
HEXAGON NIPPLE
FEMALE B.S.P.
¼”
NO.35
HEXAGON
REDUCING
SOCKET
PART NUMBER
PART NUMBER
FEMALE TEE
FEMALE B.S.P.
FEMALE B.S.P.
NO291418
¼”
1/8”
NO293814
3/8”
¼”
NO291214
½”
¼”
MALE B.S.P.
NO291238
½”
3/8”
NO2714
¼”
NO293438
¾”
3/8”
PART NUMBER
NO2738
3/8”
NO291038
1”
3/8”
NO3514
¼”
NO2712
½”
NO243412
¾”
½”
NO3538
3/8”
NO2734
¾”
NO241012
1”
½”
NO3512
½”
NO2710
1”
NO241034
1”
¾”
NO3534
¾”
NO.64
NO.72
NO.73
TAPER PLUG
ADAPTOR
REDUCING
NIPPLE
PART
NUMBER
FEMALE B.S.P.
MALE B.S.P.
PART
NUMBER
FEMALE B.S.P.
MALE B.S.P.
MALE B.S.P.
NO721418
¼”
1/8”
NO731418
¼”
1/8”
NO723818
3/8”
1/8”
NO733818
3/8”
1/8”
NO721414
¼”
¼”
NO733814
3/8”
¼”
MALE B.S.P.
NO723814
3/8”
¼”
NO731214
½”
¼”
NO6414
¼”
NO721214
½”
¼”
NO731238
½”
3/8”
NO6438
3/8”
NO723838
3/8”
3/8”
NO733438
¾”
3/8”
NO6412
½”
NO721238
½”
3/8”
NO733412
¾”
½”
NO6434
¾”
NO721212
½”
½”
NO73112
1”
½”
NO6410
1”
NO723412
¾”
½”
NO73134
1”
¾”
PART NUMBER
Specifications subject to change without notice. E&OE. ©
ALLIANCE AIR HOSE & FITTINGS
NO.27
PART NUMBER
BRASS FITTINGS
PART NUMBER
NO.26
P-13
BRASS FITTINGS
P3
BARBED TAIL WITH MALE THREAD
PART NUMBER
ALLIANCE AIR HOSE & FITTINGS
BR. FITTINGS / TAPE / VAL.
14
P-14
¼”
P31438
6.35mm ¼”
3/8”
6.35mm ¼”
½”
P351614
8mm
5/16”
¼”
P351638
8mm
5/16”
3/8”
P351612
8mm
5/16”
½”
P33814
9.5mm
3/8”
¼”
P33838
9.5mm
3/8”
3/8”
P33812
9.5mm
3/8”
½”
P31214
12.7mm
½”
¼”
P31238
12.7mm
½”
3/8”
P31212
12.7mm
½”
½”
P31234
12.7mm
½”
¾”
P33412
19mm
¾”
½”
P33434
19mm
¾”
¾”
P33410
19mm
¾”
1”
P31034
25.4mm 1”
¾”
P31010
25.4mm 1”
1”
P10
P7
BARBED TAIL WITH FEMALE THREAD
BARBED JOINER
PART NUMBER
HOSE I.D.
P101414
6.35mm ¼”
¼”
P101438
6.35mm ¼”
3/8”
P1051614
8mm
5/16”
¼”
P1051638
8mm
5/16”
3/8”
HOSE I.D.
P714
6.35mm ¼”
P103814
9.5mm
3/8”
¼”
P7516
8mm
5/16”
P103838
9.5mm
3/8”
3/8”
P738
9.5mm
3/8”
P103812
9.5mm
3/8”
½”
P712
12.7mm ½”
P101214
12.7mm ½”
¼”
P734
19mm
¾”
P101238
12.7mm ½”
3/8”
P710
25.4mm 1”
P101212
12.7mm ½”
½”
F & F BALL VALVES
FEMALE THREADS BOTH ENDS
• ROLL WIDTH: 12MM
• ROLL LENGTH: 10M
PART NUMBER
Specifications subject to change without notice. E&OE. ©
FEMALE B.S.P.
PART NUMBER
THREAD TAPE / BALL VALVES
TEFLON THREAD TAPE
MALE B.S.P.
6.35mm ¼”
P31412
TT1210
HOSE I.D.
P31414
FEMALE THREAD
ABV-108
¼”
ABV-110
3/8”
ABV-115
½”
ABV-120
¾”
ABV-125
1”
SILENCERS / HOSE CLAMPS / MANIFOLDS
SILENCERS
HOSE ‘O’ CLIPS
‘O'CLIP PLIERS
SINTERED COPPER
MALE THREAD
PART NUMBER
SIZE
SF-401
1/8”
O1214
SF-402
¼”
O916516
½” to suit 6.35mm ¼” ID hose
9/16” to suit 8mm 5/16” ID hose
SF-403
3/8”
O5838
5/8” to suit 9.5mm 3/8” ID hose
SF-404
½”
O3412
¾” to suit 12.7mm ½” ID hose
WORM DRIVE HOSE CLAMP
PART NUMBER
MIN. DIAMETER
MAX. DIAMETER
8mm
WD11-17
11mm
14mm
17mm
WD13-20
13mm
20mm
WD19-28
19mm
28mm
WD22-32
22mm
32mm
WD26-38
26mm
38mm
MANIFOLDS
High Volume 5 Way Manifold
3 Port Dome Type
5 Port Bar Type
PART NUMBER
MANIFOLD TYPE
INLET THREAD
OUTLET THREADS
MTA3
3 Port Dome Type
3/8”
MTA5
5 Port Bar Type
¼”
¼”
¼”
MUA5
High Volume 5 Way Manifold
½”
¼”
Specifications subject to change without notice. E&OE. ©
ALLIANCE AIR HOSE & FITTINGS
WD08-14
HOSE CLAMPS / MANIFOLDS
PART NUMBER
15
P-15
HOSE MANIFOLD
AL-634
HOSE MANIFOLD
16
6 PORT COMPRESSED AIR DISTRIBUTION
MANIFOLD WITH GAUGE
VOLUME
ALLIANCE AIR HOSE & FITTINGS
INLET
P-16
OUTLET
WEIGHT
LENGTH
WIDTH
2 litres
1 x 2”FBSP
6 x ¾”FBSP
12kg
420mm
330mm
*Pressure rating certified to 1100kPa (160psi)
Ball valves and Type 'A' Minsup Couplings.
Specifications subject to change without notice. E&OE. ©
SECTION Q
FIL/REG/LUB UNITS
FILTER/REGULATORS
LUBRICATORS
REGULATORS
1
DRIP LEG DRAIN
REGULATOR
CANNISTER FILTERS
FILTER ELEMENT
LUBRICATORS – IN-LINE
FILTER / LUBRICATORS
– IN-LINE
ACCESSORIES
AIR
PREPARATION
EQUIPMENT
•
Air Preparation Units are designed to condition compressed air
for use in pneumatic tools, valves, cylinders and other equipment.
Internal corrosion and contamination is minimized by filtering
moisture and impurities from the air and performance and service
life is enhanced by introducing a suitable lubricant into the air via a
lubricator.
•
Three brands of Air Preparation Unit are featured in this section
of the Catalogue, namely ALLIANCE, NORGREN and MOTOR
GUARD.
•
The ALLIANCE range has been sold in Australia for over 15
years and offers a quality yet reasonably priced range of general
purpose air preparation equipment to suit all industries.
•
NORGREN offers an extensive range of more specialized
air preparation equipment to meet almost every industrial
requirement. A selection of these products is presented on the
following pages.
•
MOTOR GUARD sub-micronic filters are canister type units for
fine filtration applications. They come in two versions with different
air entry points.
CONTENTS - AIR PREPARATION EQUIPMENT
DESCRIPTION
AIR PREPARATION EQUIPMENT
CONTENTS
2
Q-2
PAGE
¼” Filter / Regulator
Alliance
3
¼” Fil / Reg + Lubricator
Alliance
3
½” Filter / Regulator
Alliance
4
½” Fil / Reg + Lubricator
Alliance
4
¼” Filter / Regulator
Excelon
5
¼” Lubricator
Excelon
5
¼” Filter
Excelon
5
¼” Regulator
Excelon
5
3/8” Filter / Regulator
Excelon
6
3/8” Lubricator
Excelon
6
3/8” Filter
Excelon
6
3/8” Regulator
Excelon
6
½” Filter / Regulator
Excelon
7
½” Lubricator
Excelon
7
½” Filter
Excelon
7
½” Regulator
Excelon
7
¾” Filter / Regulator
Excelon
8
¾” Lubricator
Excelon
8
¾” Filter
Excelon
8
¾” Regulator
Excelon
8
Accessories
Excelon System
9
1” Filter / Regulator
Olympian Plus
11
1” Lubricator
Olympian Plus
11
1” Filter
Olympian Plus
12
1” Regulator
Accessories
½” Drip Leg Drain
¼” Mini Regulator
1/8” Pressure Gauge
¼” Pressure Gauge
¼” Cannister Filter
½” Cannister Filter
Filter Element
Lubricators
Filter / Lubricators
Olympian Plus
12
Olympian Plus System
12
Norgren
13
Norgren
14
Alliance Back Mount
14
Alliance Bottom Mount
14
Motor Guard
15
Motor Guard
15
Motor Guard
15
In - Line
In - Line
16
Specifications subject to change without notice. E&OE. ©
17
ALLIANCE F/R/L SYSTEM
FEATURES
3
ALLIANCE F/R/L SYSTEM
Alliance Air Preparation Units are available as combined Filter/Regulator units, or Filter /
Regulator + Lubricator units, with ¼” BSP or ½” BSP ports and separate Lubricator units with
matching port sizes.
Alliance equipment has the following features:
Easy to install
– One piece close-coupled units.
Easy to operate
– Easily adjustable, self-locking pressure regulator knob.
Easy filter drain
– Automatic discharge of water and particles on compressor shut-down.
Easy oil filling
– Air shut-off valve to facilitate oil entry.
Safety features
– Inner threaded explosive resistant bowl. Patented bowl guard.
Anti-vibration
– Rigidly connected units.
Solid and durable – Solid metal construction. Internal anti-corrosion treatment.
High performance – Patented swirl system for maximum water separation. Steady
pressure output. Even oil mist from lubricators.
AL-1000
AL-1010
¼” FILTER / REGULATOR WITH
SEMI-AUTOMATIC DRAIN
¼” FILTER / REGULATOR +
LUBRICATOR WITH SEMIAUTOMATIC DRAIN
INCLUDES GAUGE & BRACKET
PORT SIZE
MAX. PRESSURE
WORKING PRESSURE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
WIDTH
¼”BSP
9.6BAR 140PSI
PSI
1 – 8.8BAR
14 – 128PSI
50 micron
1000L/Min 35.3cfm
5 – 50ºC
Automatic discharge at
zero pressure
0.75kg
95mm
PORT SIZE
MAX. PRESSURE
WORKING PRESSURE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
LUBRICATION SYSTEM
OIL BOWL CAPACITY
WEIGHT
WIDTH
¼”BSPP
9.6BAR 140PSI
1 – 8.8BAR 14 – 128PSI
50 micron
1000L/Min 35.3cfm
5 – 50ºC
Automatic discharge at zero pressure
Oil fog over 24L/Min 0.9cfm
40ml
1.1kg
95mm
ALLIANCE
INCLUDES GAUGE & BRACKET
For separate Lubricator - order AL-1005
Specifications subject to change without notice. E&OE. ©
Q-3
ALLIANCE F/R/L SYSTEM
AL-2000
AL-2010
½” FILTER / REGULATOR WITH
SEMI-AUTOMATIC DRAIN
½” FILTER / REGULATOR +
LUBRICATOR WITH SEMIAUTOMATIC DRAIN
INCLUDES GAUGE & BRACKET
INCLUDES GAUGE & BRACKET
F / R / L SYSTEMS
4
PORT SIZE
MAX. PRESSURE
WORKING PRESSURE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
WIDTH
Port Size
½”BSP
9.6BAR 140PSI
SI
1 – 9.6BAR 14 – 140PSI
50 micron
2000L/Min 70.6cfm
5 – 50ºC
Automatic discharge at
zero pressure
1.4kg
115mm
MAX. PRESSURE
WORKING PRESSURE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
LUBRICATION SYSTEM
OIL BOWL CAPACITY
WEIGHT
WIDTH
1/2”BSP
9.6BAR 140PSI
1 – 9.6BAR 14 – 140PSI
50 micron
2000L/Min 70.6cfm
5 – 50ºC
Automatic discharge at zero pressure
Oil fog over 30L/Min 1.0cfm
120ml
2.1kg
115mm
ALLIANCE / NORGREN
For separate Lubricator - order AL-2005
EXCELON MODULAR F/R/L SYSTEM
FEATURES
The NORGREN EXCELON range of filters, regulators, lubricators and accessories is a fully modular system of air preparation units designed to
meet almost every industrial requirement and provide maximum ease of installation and operation. Although direct ported for “Quickclamp”
connection EXCELON can also be connected to stand-alone units using threaded fittings.
Features of the EXCELON system are:
1. PATENTED QUICKCLAMP CONNECTION SYSTEM – Simple speedy assembly of accessories and
combination units.
2. PATENTED QUARTER TURN MANUAL DRAIN
– Just a ¼ turn to open and featuring a
threaded pipe-away outlet.
3. PATENTED SHUT-OFF VALVE
– Three port / two position valve with ¼ turn
from full flow to exhaust and lockable blade
for safe system isolation.
4. LUBRICATOR FEED SIGHT DOME
– Full 360° drip visibility with easy screwdriver
drip rate adjustment. Can also be made
tamper resistant.
5. BAYONET MOUNT BOWLS
– Easy removal for routine maintenance. Detent
action prevents removal under pressure.
6. PUSH-TO-LOCK ADJUSTING KNOB
– Can also be fitted with a tamper resistant cover.
7. CAPTIVE BOWL ‘O’-RINGS
– Do not dislodge while mounting bowls.
8. BALANCED REGULATOR VALVES
– For improved pressure regulation characteristics.
9. LUBRICATOR SENSOR
– Helps maintain consistent oil mist with varying
flow rates.
The EXCELON modular system is available with port sizes from ¼” to ¾” BSP as illustrated on the following pages.
As not all EXCELON air preparation units or accessories are covered in this catalogue please do not hesitate to ask for further information.
Q-4
Specifications subject to change without notice. E&OE. ©
EXCELON MODULAR F/R/L SYSTEM
B72G-2GK-QW3-RMG
L72M-2GP-QWN
5
ZINC BODY / POLYCARBONATE BOWL WITH
GUARD / INCLUDES GAUGE
MAX. INLET PRESSURE
OUTLET PRESSURE
ADJUSTMENT RANGE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
WIDTH
¼”
10BAR 145PSI
5PSI
0.3 – 10BAR
R
5 – 150PSI
40 micron
2280L/Min 80cfm*
-20ºC - +50ºC**
Manual
0.6kg
100mm
F72G-2GN-QW3
ZINC BODY / POLYCARBONATE BOWL
WITH GUARD / MANUAL DRAIN
PORT SIZE
MAX. INLET PRESSURE
BOWL CAPACITY
FLOW CAPACITY
WORKING TEMPERATURE
WEIGHT
WIDTH
¼”
10BAR 145PSI
56ml
1440 L/Min 51cfm*
-20ºC - +50ºC**
0.49kg
60mm
EXCELON MODULAR F/R/L SYSTEM
¼” FILTER / REGULATOR
WITH MANUAL DRAIN
PORT SIZE
BOWL GUARD
NOT SHOWN
¼” LUBRICATOR
WITH MICRO-FOG
R72G-2GK-RMG
BOWL GUARD
NOT SHOWN
¼” REGULATOR
ZINC BODY / POLYCARBONATE BOWL WITH GUARD
ZINC BODY / INCLUDES GAUGE
PORT SIZE
MAX. INLET PRESSURE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
WIDTH
Port Size:
e: ¼”
10BAR 150PSI
40 micron
1800L/Min 63cfm*
-20ºC - +50ºC**
Manual
0.52kg
60mm
PORT SIZE
MAX. INLET PRESSURE
OUTLET PRESSURE
ADJUSTMENT RANGE
FLOW CAPACITY
WORKING TEMPERATURE
WEIGHT
WIDTH
¼”
20BAR 290PSI
0.3 – 10BAR
5 – 150PSI
1980L/Min 70cfm*
-20ºC - +65ºC**
0.36kg
100mm
NORGREN
¼” FILTER / MANUAL DRAIN
N
*Typical flow with 10 BAR (150 PSI) inlet pressure, 6.3 BAR (90 PSI) set pressure and 1 BAR (15 PSI) droop from set.
**Air supply must be dry enough to avoid ice formation at temperatures below +2°C.
Specifications subject to change without notice. E&OE. ©
Q-5
EXCELON MODULAR F/R/L SYSTEM
B73G-3GK-QD3-RMG
MG
L73M-3GP-QDN
3/8” FILTER / REGULATOR WITH
MANUAL DRAIN
3/8” LUBRICATOR
WITH MICRO-FOG
ALUMINIUM BODY & BOWL / INCLUDES
S GAUGE
ALUMINIUM BODY & BOWL / MANUAL DRAIN
EXCELON MODULAR F/R/L SYSTEM
6
PORT SIZE
MAX. INLET PRESSURE
OUTLET PRESSURE
ADJUSTMENT RANGE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
NORGREN
WIDTH
3/8”
17BAR 250PSI
0.3 – 10BAR
0BAR
0PSI
5 – 150PSI
40 micron
ron
3000L/Min 106cfm*
-20ºC - +80ºC**
Manual
0.7kg
105mm
PORT SIZE
MAX. INLET PRESSURE
BOWL CAPACITY
MAX. RECOMMENDED
FLOW
WORKING TEMPERATURE
WEIGHT
WIDTH
3/8”
17BAR 250PSI
100ml
1699 L/Min 60cfm*
-20ºC - +80ºC**
0.5kg
67mm
F73G-3GN-QD3
G
R73G-3GK-RMG
3/8” FILTER WITH MANUALL DRAIN
3/8” REGULATOR
ALUMINIUM BODY & BOWL
ALUMINIUM BODY / INCLUDES GAUGE
AUGE
PORT SIZE
MAX. INLET PRESSURE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
WIDTH
3/8”
17BAR 250PSI
40 micron
2100L/Min 75cfm*
-20ºC - +80ºC**
Manual
0.5kg
67mm
PORT SIZE
MAX. INLET PRESSURE
OUTLET PRESSURE
ADJUSTMENT RANGE
FLOW CAPACITY
WORKING TEMPERATURE
WEIGHT
WIDTH
3/8”
20BAR 290PSI
0.3 – 10BAR
5 – 150PSI
3600L/Min 127cfm*
-20ºC - +80ºC**
0.48kg
108mm
*Typical flow with 10 BAR (150 PSI) inlet pressure, 6.3 BAR (90 PSI) set pressure and 1 BAR (15 PSI) droop from set.
**Air supply must be dry enough to avoid ice formation at temperatures below +2°C.
Q-6
Specifications subject to change without notice. E&OE. ©
EXCELON MODULAR F/R/L SYSTEM
B74G-4GK-AD3-RMG
L74M-4GP-QDN
7
½” LUBRICATOR
WITH MICRO-FOG
ALUMINIUM BODY & BOWL /
INCLUDES GAUGE
N
ALUMINIUM BODY & BOWL / MANUAL DRAIN
PORT SIZE
MAX. INLET PRESSURE
OUTLET PRESSURE
ADJUSTMENT RANGE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
WIDTH
½”
17BAR 250PSI
PSI
0.3 – 10BAR
5 – 150PSI
40 micron
6000L/Min 212cfm*
-20ºC - +80ºC**
Automatic
1.2kg
125mm
PORT SIZE
MAX. INLET PRESSURE
BOWL CAPACITY
FLOW CAPACITY
WORKING TEMPERATURE
WEIGHT
WIDTH
1/2”
17BAR 250PSI
200ml
4200L/Min 148cfm*
-20ºC - +80ºC**
0.73kg
92mm
RMG
R74G-4GK-RMG
½” FILTER WITH AUTO DRAIN
AIN
½” REGULATOR
ALUMINIUM BODY & BOWL
ALUMINIUM BODY /
INCLUDES GAUGE
PORT SIZE
MAX. INLET PRESSURE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
WIDTH
½”
17BAR 250PSI
40 micron
4980L/Min 176cfm*
-20ºC - +80ºC**
Automatic
0.81kg
89mm
PORT SIZE
MAX. INLET PRESSURE
OUTLET PRESSURE
ADJUSTMENT RANGE
FLOW CAPACITY
WORKING TEMPERATURE
WEIGHT
WIDTH
1/2”
20BAR 290PSI
0.3 – 10BAR
5 – 150PSI
6300L/Min 220cfm*
-20ºC - +80ºC**
0.80kg
124mm
NORGREN
F74G-4GN-AD3
EXCELON MODULAR F/R/L SYSTEM
½” FILTER / REGULATOR
WITH AUTO DRAIN
*Typical flow with 10 BAR (150 PSI) inlet pressure, 6.3 BAR (90 PSI) set pressure and 1 BAR (15 PSI) droop from set.
**Air supply must be dry enough to avoid ice formation at temperatures below +2°C.
Specifications subject to change without notice. E&OE. ©
Q-7
EXCELON MODULAR F/R/L SYSTEM
B74G-6GK-AD3-RMG
L74M-6GP-QDN
¾” FILTER / REGULATOR
WITH AUTO DRAIN
CRO-FOG
¾” LUBRICATOR WITH MICRO-FOG
ALUMINIUM BODY & BOWL / INCLUDES GAUGE
GE
ALUMINIUM BODY & BOWL / MANUALL DRAIN
EXCELON MODULAR F/R/L SYSTEM
8
PORT SIZE
¾”
17BAR 250PSI
0PSI
0.3 – 10BAR
5 – 150PSI
40 micron
6000L/Min 212cfm*
-20ºC - +80ºC**
Automatic
1.2kg
130mm
MAX. INLET PRESSURE
OUTLET PRESSURE
ADJUSTMENT RANGE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
NORGREN
WIDTH
PORT SIZE
MAX. INLET PRESSURE
BOWL CAPACITY
FLOW CAPACITY
WORKING TEMPERATURE
WEIGHT
WIDTH
¾”
17BAR 250PSI
200ml
4200L/Min 148cfm*
-20ºC - +80ºC**
0.71kg
79mm
F74G-6GN-AD3
R74G-6GK-RMG
N
¾” FILTER WITH AUTO DRAIN
¾” REGULATOR
ALUMINIUM BODY & BOWL
ALUMINIUM BODY / INCLUDES GAUGE
PORT SIZE
MAX. INLET PRESSURE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
WIDTH
¾”
17BAR 250PSI
40 micron
4980L/Min 176cfm*
-20ºC - +80ºC**
Automatic
0.79kg
79mm
PORT SIZE
MAX. INLET PRESSURE
OUTLET PRESSURE
ADJUSTMENT RANGE
FLOW CAPACITY
WORKING TEMPERATURE
WEIGHT
WIDTH
¾”
20BAR 300PSI
0.3 – 10BAR
5 – 150PSI
6300L/Min 220cfm*
-20ºC - +80ºC**
0.78kg
130mm
*Typical flow with 10 BAR (150 PSI) inlet pressure, 6.3 BAR (90 PSI) set pressure and 1 BAR (15 PSI) droop from set.
**Air supply must be dry enough to avoid ice formation at temperatures below +2°C.
Q-8
Specifications subject to change without notice. E&OE. ©
EXCELON ACCESSORIES
SHUT-OFF VALVES
PIPE ADAPTORS
9
T73T / T74T
EASY TO OPERATE / LOCKABLE IN THE CLOSED POSITION
Ideal for isolating sub-systems not in use.
Use with Quickclamps to provide threaded connections
to system piping. Can be used on products with
unthreaded ports.
CODE
SERIES
PORT SIZE
T72T-2GA-P1N
Excelon 72
¼”
T72T-3GA-P1N
Excelon 72
3/8”
CODE
SERIES
PORT SIZE
T73T-2GA-P1N
Excelon 73
¼”
4215-08
Excelon 72
¼”
T73T-3GA-P1N
Excelon 73
3/8”
4215-09
Excelon 72
3/8”
T73T-4GA-P1N
Excelon 73
½”
4315-09
Excelon 73 & 74
¼”
T74T-3GA-P1N
Excelon 74
3/8”
4315-10
Excelon 73 & 74
3/8”
T74T-4GA-P1N
Excelon 74
½”
4315-11
Excelon 73 & 74
½”
T74T-6GA-P1N
Excelon 74
¾”
4315-12
Excelon 73 & 74
¾”
QUICKCLAMPS
WALL MOUNTS
CODE
SERIES
Allows easy connection of one Excelon unit
to another and secure mounting to a wall,
panel or machine surface. Connected units
can be rotated in 90° increments.
CODE
SERIES
4214-51
Excelon 72
4214-52
Excelon 72
4314-51
Excelon 73 & 74
4314-52
Excelon 73 & 74
Specifications subject to change without notice. E&OE. ©
NORGREN
INCLUDES QUICKCLAMP
Allows easy connection of one Excelon unit
to another. Connected units can be rotated
in 90° increments.
EXCELON ACCESSORIES
T72T
Q-9
EXCELON ACCESSORIES
PORTING BLOCK
MOUNTING BRACKETS
EXCELON ACCESSORIES
10
Provides secure wall mounting for individual
Excelon products.
PROVIDES 3 x ¼” AUXILLARY AIR OUTLETS
Ideal for branching off to smaller sub-systems. When placed
between a filter regulator and lubricator, it allows branching
off to systems requiring a non-lubricated supply.
CODE
4216-52
Excelon 72
4316-06
Excelon 73 & 74 series
NORGREN
PANEL MOUNT RINGS
Q-10
CODE
4224-50
SERIES
Excelon 72
4424-50
Excelon 73
4324-50
Excelon 74
4324-51
Excelon 74
NECK BRACKETS
INCLUDES PANEL MOUNT NUT
Used to panel mount pressure regulators,
filter regulators and pressure relief valves.
CODE
SERIES
Provides secure wall mounting for individual pressure
regulators, filter regulators and pressure relief valves.
MATERIAL
CODE
SERIES
4248-89
Excelon 72
Plastic
74316-50
Excelon 72
5191-88
Excelon 73
Zinc
5203-06
Excelon 73
4348-89
Excelon 74
Zinc
Specifications subject to change without notice. E&OE. ©
OLYMPIAN-PLUS PLUG-IN F/R/L SYSTEM
FEATURES
11
The upgraded OLYMPIAN-PLUS system has the following features:
1. QUICK CONNECT YOKE SYSTEM
- Simple, speedy assembly of accessories and combination units.
2. PLUG-IN UNITS
- Rapid installation, maintenance and replacement. Graphite impregnated quarter turn clamp ring for easy
operation. Detent action prevents removal under pressure.
3. BAYONET MOUNT BOWLS
- Easy removal for routine maintenance. Detent action prevents removal under pressure.
4. UNIQUE PRISMATIC SIGHT GLASS
- High visibility of liquid level. Colour change service indication on filters and filter/regulators.
5. CAPTIVE BOWL ‘O’ RINGS
- Do not dislodge while mounting bowls.
6. TAMPER RESISTANT REGULATOR COVER
- Prevents unauthorized adjustment of pressure setting.
7. PORTING BLOCK MOUNTED PRESSURE SWITCH
- Adjustable switch for feedback to monitoring systems.
8. SOFT START/DUMP VALVE
- Provides controlled increase in pressure on system start-up. High-flow dump capacity.
9. 3/2 SHUT-OFF VALVE
- Three port / two position slide valve with lockable blade. Threaded exhaust port.
The OLYMPIAN PLUS plug-in system is available with port sizes from ¼” to 1½” BSP. In this catalogue the only sizes illustrated are 1” BSP to supplement the
EXCELON range. Other sizes are available on request.
As not all OLYMPIAN-PLUS air preparation units or accessories are covered in this catalogue please do not hesitate to ask for further information.
B68G-8GK-AR3-RLG
RLG
ALUMINIUM BODY & BOWL /
INCLUDES GAUGE
PORT SIZE
MAX. INLET PRESSURE
OUTLET PRESSURE
ADJUSTMENT RANGE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
WIDTH
L68M-8GP-ERN
-ERN
1” LUBRICATOR
WITH MICRO-FOG
G
WL
ALUMINIUM BODY & BOWL
1””
17BAR 250PSI
0.4 – 8BAR
5 – 120PSI
40 micron
14,400L/Min
509cfm*
-20ºC - +80ºC**
Automatic
2.82kg
126mm
PORT SIZE
MAX. INLET PRESSURE
BOWL CAPACITY
FLOW CAPACITY
WORKING TEMPERATURE
WEIGHT
WIDTH
1”
17BAR 250PSI
500ml
12,000L/Min
424cfm*
-20ºC - +80ºC**
2.04kg
126mm
NORGREN
1” FILTER / REGULATOR
R
WITH AUTO DRAIN
OLYMPIAN-PLUS PLUG-IN F/R/L SYSTEM
The NORGREN OLYMPIAN range of plug-in filters, regulators, lubricators and accessories has been a very popular system for industrial compressed air preparation
for many years. This has been because of its ease of installation and maintenance and its high level of unit interchangeability.
*Typical flow with 10 BAR (150 PSI) inlet pressure, 6.3 BAR (90 PSI) set pressure and 1 BAR (15 PSI) droop from set.
**Air supply must be dry enough to avoid ice formation at temperatures below +2°C.
Specifications subject to change without notice. E&OE. ©
Q-11
OLYMPIAN-PLUS PLUG-IN F/R/L SYSTEM
F68G-8GN-AR3
GN AR3
R68G-8GK-RLG
1” FILTER WITH
AUTO DRAIN
1” REGULATOR
NORGREN
OLYMPIAN-PLUS PLUG-IN F/R/L SYSTEM / ACCESSORIES
12
ALUMINIUM BODY /
INCLUDES GAUGE
ALUMINIUM BODY & BOWL
PORT SIZE
MAX. INLET PRESSURE
FILTER SIZE
FLOW CAPACITY
WORKING TEMPERATURE
DRAINAGE SYSTEM
WEIGHT
WIDTH
PORT SIZE
1”
17BAR 250PSI
40 micron
11,400L/Min
403cfm*
-20ºC - +80ºC**
Automatic
2.33kg
126mm
MAX. INLET PRESSURE
OUTLET PRESSURE
ADJUSTMENT RANGE
FLOW CAPACITY
WORKING TEMPERATURE
WEIGHT
WIDTH
1”
20BAR 300PSI
0.4 – 8BAR
5 – 120PSI
10,200L/Min
360cfm*
-20ºC - +80ºC**
1.89kg
126mm
OLYMPIAN-PLUS ACCESSORIES
YOKES
BLANKING PLUG
When installed these yokes enable Olympian
basic units to be ‘plugged in’ or removed without
disturbing connection pipework.
PORT SIZE
When fitted in place of any Olympian basic unit, a
blanking plug allows air to pass through the yoke.
CODES
Single
Double
Treble
3/4”
Y64A-6GA-N1N
Y64A-6GA-N2N
Y68A-6GA-N3N
1”
Y68A-8GN-N1N
Y68A-8GN-N2N
Y68A-8GN-N3N
CODE
18-999-225
*Typical flow with 10 BAR (150 PSI) inlet pressure, 6.3 BAR (90 PSI) set pressure and 1 BAR (15 PSI) droop from set.
**Air supply must be dry enough to avoid ice formation at temperatures below +2°C.
Q-12
Specifications subject to change without notice. E&OE. ©
OLYMPIAN-PLUS ACCESSORIES
SHUT-OFF VALVES
PORTING BLOCK
13
OLYMPIAN-PLUS ACCESSORIES
CODE
PORT SIZE
T64T-6GB-P1N
¾”
T68C-8GB-B2N
1”
BRACKETS
CODE
74507-50
TOP PORT
3/8”
SIDE PORT
¼”
17-816-998
PORT SIZE
MAX. INLET PRESSURE
WORKING TEMPERATURE
FOR WALL MOUNTING THE
OLYMPIAN-PLUS SYSTEM
DRAINAGE SYSTEM
WEIGHT
WIDTH
Standard
74504-50
L64 1Litre bowl
74504-52
½”
17BAR 250PSI
-20ºC - +80ºC**
Automatic
0.6kg
59mm
Drains liquid from low points in compressed air systems.
Vent valve allows pressure to be exhausted to the
atmosphere before routine maintenance is carried out.
Specifications subject to change without notice. E&OE. ©
NORGREN
DRIP LEG DRAIN
AUTOMATIC DRAIN / ZINC ALLOY BODY & BOWL
Q-13
MINI PRESSURE REGULATOR
R07-205-RNMG
18 025 003
MINI REGULATOR
OR WITH GAUGE
NECK BRACKET
INCLUDES BRACKET / ZINC ALLOY BODY
FOR R07 MINI REGULATOR
INCLUDES MOUNTING RING
NORGREN
MINI PRESSURE REGULATOR / PRESSURE GAUGES
14
PORT SIZE
MAX. INLET PRESSURE
OUTLET PRESSURE
ADJUSTMENT RANGE
FLOW CAPACITY
WORKING TEMPERATURE
WEIGHT
WIDTH
¼”
20BAR 300PSI
5 – 10BAR
7 – 145PSI
420L/Min 15cfm*
-20ºC - +65ºC**
0.16kg
98mm
PRESSURE GAUGES
AL-40216RM
AL-63416BM
REAR ENTRY PRESSURE GAUGE
BOTTOM ENTRY
PRESSURE GAUGEE
DIAL
THREAD SIZE
MAX. PRESSURE
CASE
40mm
1/8” BSP
10BAR 145PSI
Black Steel
Monitors pressures in compressed air
systems for optimum efficiency.
Enquire about other sizes of Pressure Gauges
Q-14
Facilities mounting of R07 Mini
Regulator onto a vertical surface.
Specifications subject to change without notice. E&OE. ©
DIAL
63mm
THREAD SIZE
1/4” BSP
MAX. PRESSURE
16BAR 230PSI
Black Steel
CASE
Monitors pressures in compressed air
systems for optimum efficiency.
CANISTER FILTERS
SUB-MICRONIC CANISTER FILTERS
M-30
15
INTRODUCTION
SUB-MICRONIC CANISTER FILTER WITH
¼” BOTTOM ENTRY INLET & OUTLET
Applications for Motor Guard filters include the following:
SUPPLIED WITH WALL BRACKET
•
•
•
•
•
•
•
•
•
•
•
•
Plasma cutting systems
Spray painting shops
Pneumatic controls
Air drying
Food processing
Instrumentation systems
Air bearings
Circuit board manufacture
Plating solution agitation
Magnetic tape drives
Fluidic controls
Gas chromatography
Made in U.S.A.
PORT SIZE
MAX. TEMPERATURE
1/4”
1274L/Min 45cfm
8.6BAR 125PSI
79°C
REMOVAL RATING
0.01microns
MAX. FLOW @ 5.5BAR
MAX. PRESSURE
A high efficiency, remote mount, oil aerosol removal filter for the fine-filtration
of compressed air. It will remove oil aerosols, condensed moisture, smoke,
rust and scale particles. The inlet and outlet ports of the filter canister are ¼”
and the canister is designed for use with flexible air hose in conjunction with
a remote bracket mount. The filter unit takes replacement element M-723
or a standard 2-ply toilet roll of the correct size. The M-723 element is a roll
of absorbent, high-wet-strength cellulose fibres wound on a moisture stable
polyethylene core. When toilet rolls are used as filter elements, care must be
taken to see that the dimensions of the roll are no less than those of the M-723
element or by-passing will occur.
M-60
M-723
MAX. TEMPERATURE
1/2”
2831L/Min 100cfm
8.6BAR 125PSI
79°C
REMOVAL RATING
0.01microns
MAX. FLOW @ 5.5BAR
MAX. PRESSURE
Similar to the M-30 filter but with a higher flow rating
and ½” inlet and outlet ports positioned for direct in-line
installation on rigid pipe systems. Uses Motor Guard
replacement element M-723 or a standard 2-ply toilet
roll. If the toilet roll element is used care must be taken to
ensure that its dimensions are no less than those of the
M-723 element or by-passing will occur.
Made in U.S.A.
Made in U.S.A.
FILTER ELEMENT
FOR M-30 AND M-60 SUB-MICRONIC
CANISTER FILTERS
Replacement element for M-30 and M-60 submicronic filters. Consists of a roll of absorbent,
high-wet-strength cellulose fibres wound on a
moisture stable polyethylene core.
Specifications subject to change without notice. E&OE. ©
MOTOR GUARD
SUB-MICRONIC CANISTER
FILTER WITH ½” SIDE
ENTRY INLET & OUTLET
PORT SIZE
CANISTER FILTERS
These compressed air filters utilise the dual compression concept and
are designed to remove oil aerosols, smokes, condensed moisture and
sub-micronic solid particles from compressed air and vacuum lines. They
provide high efficiency filtration with high flow rates and an acceptable
pressure drop in a small, compact housing. Their efficiency is illustrated
by the fact that you can manually blow through the unit without difficulty,
but the air will not pass tobacco smoke. The filters should be installed to
supplement rather than replace any existing moisture traps, dryers and
filters in the air lines. The conventional equipment should remove most
of the moisture and solid contaminants above certain specified size and
the Motor Guard filter will remove a high percentage of the remaining
condensed moisture, oil aerosols and sub-micronic particles from the air.
Q-15
LUBRICATORS – IN-LINE
LUBRICATORS – IN-LINE
16
TP-1L
PNEUTECH IN-LINE LUBRICATORS
- INTRODUCTION
Manufactured in the USA, the Pneutech range of heavy duty cast aluminium
bowl type lubricators and filter/lubricators is designed for direct attachment
to air tools to extend tool life and eliminate costly repairs and downtime.
Close connected in-line lubricators are particularly important where
tools are being used on the end of long hoses as is often the case in the
construction and mining industries. Equipment such as pavement breakers,
rock drills and other on-site tools are particularly vulnerable to dirt and
foreign particles picked up at the air inlet or hose ends when not in use. It is
highly desirable, therefore to filter and lubricate the supply air immediately
before the tool.
Pneutech in-line lubricators and filter/lubricators will provide the needed
air preparation in the right position if permanently connected to the tool
on a short piece of hose before the first connector. These robust units
are available with port sizes ranging from ¼” NPT to 1” NPT, oil bowl
capacities from 31ml. Flow rates range from 424 L/min (15cfm) to 4247L/
min (150cfm).
84mm
62mm
IAT Air Tool Lubricant described on page L-25 is recommended for use in
Pneutech Air Preparation Units.
¼” IN-LINE LUBRICATOR
31ML OIL CAPACITY
INLET / OUTLET SIZE
MAX. WORKING
PRESSURE
AIR FLOW
WIDTH
TP-2L
¼”FNPT
34.4BAR 500psi
424L/min 15cfm
56mm
TP-3L
PNEUTECH
130mm
Q-16
162mm
68mm
90mm
½” IN-LINE LUBRICATOR
¾” IN-LINE LUBRICATOR
42ML OIL CAPACITY
111ML OIL CAPACITY
INLET / OUTLET SIZE
MAX. WORKING
PRESSURE
AIR FLOW
WIDTH
½”FNPT
34.4BAR 500psi
@ 4.8BAR:
849L/min 30cfm
60mm
Specifications subject to change without notice. E&OE. ©
INLET / OUTLET SIZE
MAX. WORKING
PRESSURE
AIR FLOW
WIDTH
¾”FNPT
17.9BAR 260PSI
@ 4.8BAR:
1982L/min 70cfm
80mm
LUBRICATORS – IN-LINE
TP-4L
TP-5L
17
254mm
90mm
120mm
¾” IN-LINE LUBRICATOR
1” IN-LINE LUBRICATOR
330ML OIL CAPACITY
480ML OIL CAPACITY
INLET / OUTLET SIZE
MAX. WORKING
PRESSURE
AIR FLOW
WIDTH
INLET / OUTLET SIZE
¾”FNPT
20.6BAR 300psi
MAX. WORKING
PRESSURE
AIR FLOW
@ 4.8BAR:
1982L/min 70cfm
88mm
WIDTH
1”FNPT
17.2BAR 250psi
@ 4.8BAR:
4247L/min 150cfm
116mm
FILTER / LUBRICATORS – IN-LINE
TP-2FL
TP-3FL
209mm
68mm
68mm
½” IN-LINE FILTER / LUBRICATOR
¾” IN-LINE FILTER / LUBRICATOR
42ML OIL CAPACITY
111ML OIL CAPACITY
INLET / OUTLET SIZE
FILTER SIZE
MAX. WORKING
PRESSURE
AIR FLOW
WIDTH
½”FNPT
40 micron
34.4BAR 500psi
@ 4.8BAR:
849L/min 30cfm
60mm
INLET / OUTLET SIZE
FILTER SIZE
MAX. WORKING
PRESSURE
AIR FLOW
WIDTH
¾”FNPT
40 micron
17.9BAR 260PSI
@ 4.8BAR:
1982L/min 70cfm
76mm
PNEUTECH
209mm
LUBRICATORS – IN-LINE / FILTER LUBRICATORS – IN-LINE
181mm
For Oil for these Lubricators see page L-25.
Specifications subject to change without notice. E&OE. ©
Q-17
PNEUTECH
18
Q-18
Specifications subject to change without notice. E&OE. ©
SECTION R
AIR MOVERS
AIR MISTERS
PORTABLE BANDSAW
BOLT CUTTER
BAND SAW
DRILLS
HAMMER DRILL
IMPACT WRENCHES
JIGSAW
NAME PLATE TACKER
HIGH TORQUE
NUTRUNNERS
PICKET POST DRIVER
PUMP - DRUM
TAPPER
TERMINAL INSERTER
CONCRETE VIBRATOR
MISCELLANEOUS
PRODUCTS
•
This section contains various brands and models of
tools found to have some feature that marks them out as
unique or particularly useful and which don’t fit into any
other Section of the Product Guide.
SURFACE MOUNT
VIBRATOR
CONTENTS – MISCELLANEOUS PRODUCTS
TOOLS
CONTENTS
2
Air Mover
PAGE
Venturi
4
Portable Bandsaw
6
Bolt Cutters
6
Hammer Drill
7
Jigsaw
7
Reversible Drill
Heavy Duty
8
Impact Wrench
½” Square Drive
9
Impact Wrench
Pistol Grip
Impact Wrench
“D” Handle
Impact Wrench
“T” Handle
Impact Wrench
“T” Handle
Impact Wrench
“T” Handle
Impact Wrench
High Torque
Nutrunners
Name Plate Tacker
¾” Square Drive
9
1 - ½” Square Drive
10
1 - ½” Square Drive
10
1 - ½” Square Drive
11
2” Square Drive
11
2 -2½” Square Drive
12
Non Impact
13
14
Picket Post Driver
15
Drum Pump
16
Concrete Vibrator
115mm
18
Concrete Vibrator
140mm
18
Air Tapper
Automatic Reverse
17
17
Roller Vibrators
CONTENTS
Air Terminal Inserter
Surface Mount
Vibrators
R-2
3
Air Mister with Stand
Specifications subject to change without notice. E&OE. ©
18
AIR MOVERS
INTRODUCTION
3
Air Movers are used where there is a need to disperse fumes,
move air into confined spaces or cool machinery and products
with a blast of directed air.
AIR MOVERS
The Air Movers featured in this section operate on the
venturi principal. Small volumes of high velocity air from the
compressor are passed through the side of the cast body of
the venturi and out of the nozzle jets inside the body which
point in the direction of the exhaust cone. This creates a
venturi or pulling action which induces large volumes of low
velocity air through the body and out into the conical air
diffuser.
The models listed below are reccomended for use with a 1½"
(38mm) ID hose.
Air Movers
TS-MO12
TS-MO14
AIR INLET SIZE
BASE DIAMETER
OVER ALL LENGTH
WEIGHT
VENTURI AIR MOVER - 1465 CFM
AIR INLET SIZE
½” NPT
186mm
426mm
2.5kg
BASE DIAMETER
OVER ALL LENGTH
WEIGHT
½” NPT
186mm
775mm
3.9kg
Inlet Pressure
Air Consumed
Total Air Flow
Inlet Pressure
Air Consumed
Total Air Flow
4.1 bar
60 psi
877 L/min
31 cfm
24437 L/Min
863cfm
4.1 bar
60 psi
877 L/Min
31cfm
32139 L/Min
1135cfm
5.5 bar
80 psi
1161 L/min
41 cfm
30468 L/Min
1076cfm
5.5 bar
80 psi
1161 L/Min
41cfm
37038 L/Min
1308cfm
6.9 bar
100 psi
1444 L/min
51 cfm
34121 L/Min
1205cfm
6.9 bar
100 psi
1444 L/Min
51cfm
41569 L/Min
1465cfm
MISCELLANEOUS
VENTURI AIR MOVER – 1205 CFM
Models designed for underground use also available on request.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
R-3
AIR MOVERS / AIR MISTERS
TS-MO36
TS-MO54
TS-MO82
AIR MISTERS / AIR MOVERS
4
VENTURI AIR MOVER - 3698 CFM
AIR INLET SIZE
AIR INLET SIZE
1” NPT
286mm
1124mm
10.1kg
BASE DIAMETER
OVER ALL LENGTH
WEIGHT
VENTURI AIR MOVER - 5435 CFM
BASE DIAMETER
OVER ALL LENGTH
WEIGHT
VENTURI AIR MOVER - 8220 CFM
AIR INLET SIZE
1” NPT
365mm
1170mm
16.4kg
BASE DIAMETER
OVER ALL LENGTH
WEIGHT
1” NPT
432mm
1219mm
19.1kg
Inlet Pressure
Air Consumed
Total Air Flow
Inlet Pressure
Air Consumed
Total Air Flow
Inlet Pressure
Air Consumed
Total Air Flow
4.1 bar
60 psi
1699 L/min
60 cfm
72491 L/min
2560 cfm
4.1 bar
60 psi
3058 L/min
108 cfm
119355 L/min
4215 cfm
4.1 bar
60 psi
5351 L/min
189 cfm
175054 L/min
6182 cfm
5.5 bar
80 psi
2293 L/min
81 cfm
85516 L/min
3020 cfm
5.5 bar
80 psi
4021 L/min
142 cfm
136203 L/min
4810 cfm
5.5 bar
80 psi
7135 L/min
252 cfm
206826 L/min
7304 cfm
6.9 bar
100 psi
2860 L/min
101 cfm
104715 L/min
3698 cfm
6.9 bar
100 psi
5040 L/min
178 cfm
153901 L/min
8220 cfm
6.9 bar
100 psi
10760 L/min
380 cfm
232764 L/min
8220 cfm
MISCELLANEOUS
TS-MI12
Air Misters are Venturi Air Movers with a water attachment and
stand. Air Misters are used wherever large volumes of humidified
air need to be moved into a space. They are particularly suited for
use in hazardous areas.
AIR MISTER WITH STAND - 1205 CFM
AIR INLET SIZE
WATER INLET SIZE
LxW
WEIGHT INCL. STAND
½” NPT
¾” NPT
1253 x 753mm
14.5kg
Inlet Pressure
Air Consumed
Total Air Flow
4.1 bar
60 psi
877 L/min
31 cfm
24437 L/min
863 cfm
5.5 bar
80 psi
1161 L/min
41 cfm
30468 L/min
1076 cfm
6.9 bar
100 psi
1444 L/min
51 cfm
34121 L/min
1205 cfm
Enquire about Air Movers designed for underground use.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
R-4
Specifications subject to change without notice. E&OE. ©
AIR MISTERS
TS-MI14
TS-MI36
5
AIR MISTERS
AIR MISTER WITH STAND - 1465 CFM
AIR INLET SIZE
WATER INLET SIZE
LxW
WEIGHT INCL. STAND
½” NPT
¾” NPT
1253 x 753mm
15.9kg
AIR MISTER WITH STAND – 3698 CFM
AIR INLET SIZE
WATER INLET SIZE
LxW
WEIGHT INCL. STAND
1” NPT
¾” NPT
1253 x 753mm
22.2kg
Inlet Pressure
Air Consumed
Total Air Flow
Inlet Pressure
Air Consumed
Total Air Flow
4.1 bar
60 psi
877 L/min
31 cfm
32139 L/min
1135 cfm
4.1 bar
60 psi
1699 L/min
60 cfm
724911 L/min
2560 cfm
5.5 bar
80 psi
1161 L/min
41 cfm
37038 L/min
1308 cfm
5.5 bar
80 psi
2293 L/min
81 cfm
85516 L/min
3020 cfm
6.9 bar
100 psi
1444 L/min
51 cfm
41569 L/min
1465 cfm
6.9 bar
100 psi
2860 L/min
101 cfm
104715 L/min
3698 cfm
TS-MI54
TS-MI82
AIR INLET SIZE
WATER INLET SIZE
LxW
WEIGHT INCL. STAND
1” NPT
¾” NPT
1253 x 753mm
28.1kg
AIR MISTER WITH STAND – 8220 CFM
AIR INLET SIZE
WATER INLET SIZE
LxW
WEIGHT INCL. STAND
1” NPT
¾” NPT
1253 x 753mm
31.3kg
Inlet Pressure
Air Consumed
Total Air Flow
Inlet Pressure
Air Consumed
Total Air Flow
4.1 bar
60 psi
3058 L/min
108 cfm
119355 L/min
4215 cfm
4.1 bar
60 psi
5351 L/min
189 cfm
175054 L/min
6182 cfm
5.5 bar
80 psi
4021 L/min
142 cfm
136203 L/min
4810 cfm
5.5 bar
80 psi
7135 L/min
252 cfm
206826 L/min
7304 cfm
6.9 bar
100 psi
5040 L/min
178 cfm
153901 L/min
5435 cfm
6.9 bar
100 psi
10760 L/min
380 cfm
232764 L/min
8220 cfm
MISCELLANEOUS
AIR MISTER WITH STAND – 5435 CFM
Enquire about Air Misters designed for underground use.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
R-5
BANDSAW - PORTABLE / BOLT CUTTER
MIS-184
BOLT CUTTER / BANDSAW - PORTABLE
6
PORTABLE BANDSAW
ALUMINIUM HOUSING
CUTTING CAPACITY Ø
114mm
122m/min
1274L/min 45cfm
3/8”NPT
6.1kg
200mm
505mm
268mm
BLADE SPEED:
AIR CONS
AIR INLET SIZE
WEIGHT
WIDTH
LENGTH
HEIGHT
MIS-1280
BOLT CUTTER
PNEUMATIC / CHOICE OF CUTTER HEADS
OPERATING PRESSURE
CUTTING TIME
BORE
STROKE
WEIGHT
MISCELLANEOUS
CUT TING CAPACIT Y
90 - 130 psi
1 - 2 seconds
127mm
76mm
9kg
see below
Portable pneumatic bolt cutter for fast and economic
cutting of metals and plastics. Choice of blades
are available for various applications. A pneumatic
bolt cutter takes away OH&S risks associated
with the constant strain of using hand bolt cutters.
Ideal for bar and chain cutting in fabrication shops,
reinforcement bar cutting on construction sites and
in plants manufacturing concrete products.
SIDE CUT
BLADES
CENTRE CUT
BLADES
Steel Low Carbon
to 40824 kg
Tensile
Rockwell 15
Steel High Carbon
to 58968 kg
Tensile
Rockwell 30
Steel High Alloy to
81648 kg Tensile
Rockwell 40
Reinforcing Bars
to 34020kg Tensile
to Grade 75
Stainless Steel to
81648kg Tensile
Rockwell 40
Chain High Alloy to
81648kg Tensile
Rockwell 40
Aluminium Brass
Copper
Rod & Bar
CENTRE CUT
BLADES
13mm ½”
13mm ½”
10mm 3/8”
10mm 3/8”
10mm 3/8”
10mm 3/8”
13mm ½”
SIDE CUT BLADES
13mm ½”
13mm ½”
10mm 3/8”
Do Not Cut
Do Not Cut
Do Not Cut
13mm ½”
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
R-6
Specifications subject to change without notice. E&OE. ©
HAMMER DRILL / JIGSAW
IAT-1205
7
HAMMER DRILL / JIGSAW
ROTARY HAMMER DRILL
SDS PLUS BIT HOLDER / LIGHT WEIGHT
DRILLING CAPACITY
POWER
FULL-LOAD SPEED
IMPACT FREQUENCY
AIR CONS
AIR INLET SIZE
WEIGHT
20mm in concrete,
13mm in steel,
30mm in timber
740W 0.98HP
850rpm
3900bpm
960L/Min 34cfm
¼”
2.7kg
Pneumatic rotary hammer drills can be used
for drilling stone, bricks, concrete, steel and
wood safely in wet, hazardous and dusty
environments where electric drills can’t. Ideal
for the petrochemical industry where electric
tools are prohibited, wet areas such as pipelines,
drains, sewers, retaining weirs, etc and dusty
construction sites and manufacturing plants. With
additional seals and an exhaust hose, it can be
used for underwater applications.
IAT-1268
JIGSAW
LOCKING SWITCH / SAFETY COVER /
ANTI-SPLINTER INSERT
OUTPUT POWER
CUTTING THICKNESS
AIR CONS. UNDER
LOAD
AIR INLET SIZE
WEIGHT
BOSCH
FREE SPEED
400W 0.54HP
60mm wood
10mm mild steel
15mm non ferrous metals
30mm plastic
2400spm
720L/Min 25.4cfm
¼” NPT
1.85kg
Versatile tool for straight or curve cutting of a
range of materials including metals, plastics and
wood. Particularly useful in situations where
electric tools are not to be used such as wet and
flammable areas eg petrochemical industry, power
stations, boat building and repairs, etc.
Enquire about Drill Bits and Blades for these tools.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
R-7
DRILLS
PT-835
DRILLS
8
HEAVY DUTY REVERSIBLE DRILL
350RPM / NO.2 MORSE TAPER
FREE SPEED
DRILLING CAPACITY
REAMING CAPACITY
TAPPING CAPACITY
WEIGHT
350rpm
22.2mm
15.9mm
15.9mm
7.7kg
Used for boring work on timber bridge decks, timber
trusses, railway sleepers, mining timbers etc.
MISCELLANEOUS
PT-875
HEAVY DUTY REVERSIBLE DRILL
750RPM / NO.2 MORSE TAPER
FREE SPEED
DRILLING CAPACITY
REAMING CAPACITY
TAPPING CAPACITY
WEIGHT
750rpm
14.3mm
11.9mm
11.9mm
7.9kg
Faster model for quicker drilling of smaller holes in
the same aplications as APT-835
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
R-8
Specifications subject to change without notice. E&OE. ©
IMPACT WRENCHES
PT-252
9
IMPACT WRENCHES
½” SQ. DR. IMPACT WRENCH
NO EXPOSED ALUMINIUM PARTS
BOLT CAPACITY
TORQUE
AIR CONS
AIR INLET SIZE
WEIGHT
WIDTH
20mm
850Nm 627ft lb
142-708L/min
5-25cfm
¼” NPT
2.1kg
74mm
189mm
175mm
This impact wrench has no exposed light metal
parts which are unsuitable for underground mines.
Powered by Shinano.
PT-262
MISCELLANEOUS
¾” SQ. DR. IMPACT WRENCH
NO EXPOSED ALUMINIUM PARTS
220mm
BOLT CAPACITY
TORQUE
AIR CONS
AIR INLET SIZE
WEIGHT
24mm
1650Nm 1217ft lb
425-1274L/min
15-45cfm
3/8” NPT
3.8kg
WIDTH
90mm
210mm
Like the PT-252, this impact wrench has no
exposed light metal parts which are unsuitable for
underground mines.
Powered by Shinano.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
R-9
IMPACT WRENCHES
PT-3615P
IMPACT WRENCHES
10
1-1/2” SQ. DR. PISTOL
GRIP IMPACT WRENCH
EXTRA HEAVY DUTY / 3 JAW CLUTCH
BOLT CAPACITY
MAX. TORQUE
AIR INLET
AIR HOSE REQD
LENGTH
WIDTH
WEIGHT
55mm
5933Nm 4390ft lb
½”gas
16mm 5/8” I.D.
276mm
138mm
14.9kg
Extra heavy duty tool for use in construction,
mining, shipbuilding, oil rigs, etc.
MISCELLANEOUS
PT-3615D
1-1/2” SQ. DR. “D” HANDLE
IMPACT WRENCH
EXTRA HEAVY DUTY / 3 JAW CLUTCH
BOLT CAPACITY
MAX. TORQUE
AIR INLET
AIR HOSE REQD
LENGTH
WIDTH
WEIGHT
55mm
5933Nm 4390ft lb
½”gas
16mm 5/8” I.D.
355mm
134mm
15.27kg
Used for the same applications as APT-3615P but
where the “D” Handle is more convenient.
For Sockets for these Impact Wrenches see page L-12
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
R-10
Specifications subject to change without notice. E&OE. ©
IMPACT WRENCHES
PT-3815T
11
IMPACT WRENCHES
1-1/2” SQ. DR. “T” HANDLE
IMPACT WRENCH
EXTRA HEAVY DUTY / 3 JAW CLUTCH
BOLT CAPACITY
MAX. TORQUE
AIR INLET
AIR HOSE REQD
LENGTH
WIDTH
WEIGHT
80mm
7995Nm 5916ft lb
¾”gas
19mm ¾” I.D.
448mm
176mm
32kg
Used on track bolts on earth moving and mining
machines and larger bolts in structural steel
erection, wharf construction, shipyards, oil rigs,
railway workshops, etc.
PT-3820T
MISCELLANEOUS
2” SQ. DR. “T” HANDLE
IMPACT WRENCH
EXTRA HEAVY DUTY / 3 JAW CLUTCH
BOLT CAPACITY
MAX. TORQUE
AIR INLET
AIR HOSE REQD
LENGTH
80mm
8954Nm 6626ft lb
¾”gas
19mm ¾” I.D.
448mm
WIDTH
WEIGHT
176mm
32kg
Same applications as APT-3820T but
where 2” sq. dr. is preferred.
For Sockets for these Impact Wrenches see page L-12
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
R-11
IMPACT WRENCHES
PT-6320T
IMPACT WRENCHES
12
2” SQ. DR. “T” HANDLE
IMPACT WRENCH
SUPER HEAVY DUTY / 3 JAW CLUTCH
BOLT CAPACITY
MAX. TORQUE
AIR INLET
AIR HOSE REQD
LENGTH
WIDTH
WEIGHT
110mm
25,544Nm 17,423ft lb
1”gas
25mm 1” I.D.
535mm
190mm
67kg
Used for super heavy duty tightening work in all
areas of the construction, mining, rail, oil and gas
industries.
MISCELLANEOUS
PT-6325T
2-1/2” SQ. DR. “T” HANDLE
IMPACT WRENCH
SUPER HEAVY DUTY / 3 JAW CLUTCH
BOLT CAPACITY
MAX. TORQUE
AIR INLET
AIR HOSE REQD
LENGTH
WIDTH
WEIGHT
110mm
26,370Nm 19,514ft lb
1”gas
25mm 1” I.D.
535mm
190mm
67kg
Used for the toughest tightening work
in all major industries.
For Sockets for these Impact Wrenches see page L-13
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
R-12
Specifications subject to change without notice. E&OE. ©
HIGH TORQUE NUTRUNNERS
PT-64008
13
HIGH TORQUE NUTRUNNERS
¾" SQ. DR. PISTOL GRIP GEAR
DRIVE NUTRUNNER
NON IMPACT
BOLT CAPACITY
MAX. TORQUE
AIR INLET
AIR HOSE REQ'D.
AIR PRESSURE
LENGTH
WIDTH
WEIGHT
M10 - M22
825Nm 627ft lb
¼" Gas
10mm 3/8" ID
6.3 Bar 90psi
360mm
82mm
5.5kg
PT-64012
FEATURES
•
•
•
•
High Torque Accuracy
Minimum Vibration
Light Weight
Includes Reaction Bar
PT-64017
1" SQ. DR. PISTOL GRIP
GEAR DRIVE NUTRUNNER
NON IMPACT
NON IMPACT
BOLT CAPACITY
MAX. TORQUE
AIR INLET
AIR HOSE REQ'D.
AIR PRESSURE
LENGTH
WIDTH
WEIGHT
M12 - M27
1250Nm 923ft lb
¼" Gas
10mm 3/8" ID
6.3 Bar 90psi
360mm
82mm
5.9kg
BOLT CAPACITY
MAX. TORQUE
AIR INLET
AIR HOSE REQ'D.
AIR PRESSURE
LENGTH
WIDTH
WEIGHT
M14 - M33
1700Nm 1255ft lb
¼" Gas
10mm 3/8" ID
6.3 Bar 90psi
376mm
93mm
6.5kg
MISCELLANEOUS
1" SQ. DR. PISTOL GRIP
GEAR DRIVE NUTRUNNER
Enquire about models to 12,000 Nm
Enquire about models with right angle drive
For Sockets for these Nutrunners see page L-12
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
R-13
NAME PLATE / CABLE CLIP TACKER
AM221
NAME PLATE / CABLE CLIP TACKER
14
PNEUMATIC NAME PLATE &
CABLE CLIP TACKER
This tool is designed for permanent fastening of metal plates to metal products
without drilling holes. The fastening tacks are placed on the magnetic holding tip
of the tool and a press of the trigger delivers a single controlled impact. Amtaks
fasten quickly and permanently with no drilling or surface preparation. Permanently
embedded fasteners can hold over 100kg.
The Pneumatic Name Plate
Tacker comes in a strong, hardsided case with a regulator and
container of fasteners.
MISCELLANEOUS
Metal-Tack fasteners were specifically developed
to fasten light weight parts such as nameplates and
cable tie holding clips to heavier metal products
such as pumps, valves and machinery. They fasten
quickly and permanently with no drilling or surface
preparation.
Metal-Tacks are ideal for fastening nameplates,
barcode tags, cable tie clips or any other light
attachment. A portable, safe, single-impact air tool
allows the operator to position the attachment before
fastening. This eliminates the problem of having
to precisely locate holes in the base material and
then precisely align those holes with the ones in the
attachment.
A Heavy-duty Solution to Light-load Fastening
Metal-Tacks eliminate costly problems associated with other fastening
methods. Adhesives are messy and may be less than permanent. Other
fasteners that require drilled holes also require perfect alignment between
base metal and attachment. In addition, drilling holes may cause damage
by drilling too deep, and metal drill chips are difficult to completely clean up
Metal-Tacks are used for many applications including metal ID serial
tags, data plates, wiring clips, ground connections, balance weights, bar
coding plates and small component assembly in many industries including
automotive, electronics, fluid power, agricultural equipment, elevators,
automation equipment and heavy construction equipment.
Affi xing name plates to motors and
other machinery parts.
A large range of tacks are available for different materials
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
R-14
Specifications subject to change without notice. E&OE. ©
PICKET POST DRIVER
PT-731
15
PICKET POST DRIVER
285mm
PICKET POST DRIVER
MIN AIR CONS
MIN HOSE REQD
AIR PRESSURE
WEIGHT
482L/Min 17cfm
around the farm
708L/Min 25cfm for
larger properties
991L/Min 35cfm for
contract fencing
1841L/Min 65cfm to
run tool continuously
13mm ½”ID
80psi – soft ground
100psi – normal use
140psi – hard ground
710mm
18kg
Useful and time saving tool for fence construction.
Ideal for fencing contractors and farmers for driving in
star picket posts, trellising posts, plastic posts, timber
and metal tubular posts, etc. A range of guides and
dollys are available for different post types and sizes.
This tool has proved itself in building long strained
fencing in record time and will drive star posts through
bitumen, shale, black soil, ironstone and sandstone.
PICKET POST DRIVER ACCESSORIES
Product
Size
Description
Striking Dolly
50mm dia.
Standard with initial purchase
For use on solid metal plugs and caps
600mm long
Used to drive OzPosts
Adaptor Dolly
Tool Holder
Used to insert your own made tools not listed below.
Guides
54mm
Standard with initial purchase
MISCELLANEOUS
36mm dia.
Expanded Dolly
54mm slotted
56mm bore
56mm square
73mm bore
To suit 2” square posts & 2” ID pipe
80mm bore
80mm square
To suit 3” timber posts
93mm bore
To suit 3” ID pipe
98mm bore
107mm bore
114mm bore
120mm bore
To suit 4” ID pipe
132mm bore
145mm bore
To suit 5” timber
Note: Guides and Dollys can be made to order. Prices available on request.
For Air Tool Oil see page L-25
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
R-15
PUMPS - DRUM
PT-1701
PUMPS - DRUM / CONCRETE VIBRATOR
16
DRUM PUMP
MIN. OPENING PUMP
WILL ENTER
AIR INLET SIZE
AIR OUTLET HOSE SIZE
FLUID OUTLET HOSE
SIZE
AIR CONS
NET WEIGHT
OVERALL LENGTH
54mm
¼”
19.05mm ¾”
19mm ¾”
340L/min 12cfm
5.3kg
1175mm
Used for pumping liquids out of 200 litre drums.
VIBRATORS - CONCRETE
PT-0140
MISCELLANEOUS
PT-0115
115MM CONCRETE VIBRATOR
140MM CONCRETE VIBRATOR
HEAD DIAMETER
115mm
HEAD DIAMETER
140mm
HEAD WEIGHT
17kg
425mm
11,000vpm
55m³/h
1600L/Min 56.5cfm
1220mm
23kg
24,200N
HEAD WEIGHT
26kg
520mm
9,000vpm
65m³/h
2500L/Min 88.3cfm
1300mm
36kg
34,300N
HEAD LENGTH
FREQUENCY
PLACEMENT
AIR CONS
OVERALL LENGTH
TOTAL WEIGHT
FORCE
HEAD LENGTH
FREQUENCY
PLACEMENT
AIR CONS
OVERALL LENGTH
TOTAL WEIGHT
FORCE
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
R-16
Specifications subject to change without notice. E&OE. ©
MAY12P
17
AIR TAPPER / AIR TERMINAL INSERTER
AIR TAPPER WITH
AUTOMATIC REVERSE
CAPACITY
POWER
SPEED
WEIGHT
WIDTH
10mm alloy steel
12mm cast iron and mild steel
14mm aluminium, bronze and brass
400W 0.53HP
220rpm forward
470rpm reverse
1.96kg
180mm
Pneumatic tappers are the best solution for manual machine
tapping because they are fast to use and easy to handle. The
MAY12P tapper is a quality tool made in Italy that has the
capacity of tapping 12mm threads in cast iron and mild steel. The
automatic reversing system switches the direction of rotation at
the end of the tapping cycle. To extract the tool from the hole,
the operator just needs to pull on the tool and it will automatically
reverse the direction of rotation and simultaneously double
its speed. This takes away the risk of damaging the thread or
breaking the tap which is a possibility with some manual reverse
tools. Other models available on request.
IP900
MISCELLANEOUS
FIAM
AIR TAPPER / AIR TERMINAL INSERTER
AIR TERMINAL INSERTER
LEVER THROTTLE
MODEL
CODE
STROKES PER MIN
WEIGHT
BODY DIAMETER
LENGTH
MAX. AIR CONS
AIR INLET
NOISE LEVEL
IP900
169975110
900
0.44kg
32mm
204mm
60L/Min 2.1cfm
¼”
78dBA
Electrical connectors are used extensively in numerous assembly
operations, especially in the home appliance, motor vehicle and
electromechanical sectors. Insertion of these connectors can
be a very tedious task. The IP900 is a special light and compact
inserting tool which, with only a few impulses, makes the
insertion of connectors fast and easy with maximum accuracy.
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
R-17
VIBRATORS – SURFACE MOUNT
PT-750
PT-1200
VIBRATORS – SURFACE MOUNT
18
ROLLER VIBRATOR
ROLLER VIBRATOR
CENTRIFUGAL FORCE – 7,340N
CENTRIFUGAL FORCE -11,743N
FREQUENCY
13,000rpm
FREQUENCY
15,000rpm
AMPLITUDE
1.19mm
1140L/Min 40.2cfm
8.6kg
AMPLITUDE
1.59mm
1140L/Min 40.2cfm
9.1kg
AIR CONS
WEIGHT
ALSO AVAILABLE
Quick Release Model – Code PT-750QR
AIR CONS
WEIGHT
ALSO AVAILABLE
Quick Release Model – Code PT-1200QR
PT-1600QR
MISCELLANEOUS
ROLLER VIBRATOR
BRATOR
CENTIFUGAL FORCE
ORCE – 15,500N
FREQUENCY
1600rpm
AMPLITUDE
1.6mm
1140L/Min 40.2cfm
9.1kg
AIR CONS
WEIGHT
ALSO AVAILABLE
Standard Model – Code PT-1600
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
R-18
Specifications subject to change without notice. E&OE. ©
VIBRATORS – SURFACE MOUNT
PT-2000
19
VIBRATORS – SURFACE MOUNT
ROLLER VIBRATOR
CENTRIFUGAL FORCE – 19,572N
FREQUENCY
16,000rpm
AMPLITUDE
1.8mm
1440L/Min 50.8cfm
14.5kg
AIR CONS
WEIGHT
ALSO AVAILABLE
Quick Release Model – Code PT-2000QR
PT-6000
ROLLER VIBRATOR
ROLLER VIBRATOR
CENTRIFUGAL FORCE – 36,253N
CENTRIFUGAL FORCE – 57,827N
FREQUENCY
15,200rpm
FREQUENCY
14,500rpm
AMPLITUDE
1.98mm
1620L/Min 57.2cfm
15.2kg
AMPLITUDE
AIR CONS
3.18mm
1860L/Min 65.7cfm
WEIGHT
15.5kg
AIR CONS
WEIGHT
ALSO AVAILABLE
Standard Model – Code PT-3500
ALSO AVAILABLE
Standard Model – Code PT-6000
MISCELLANEOUS
PT-3500
NOTE: Where “AVERAGE AIR CONSUMPTION” is given for tools in this Product Guide it indicates air usage over a typical duty cycle and not the size of air compressor required for maximum tool usage.
Specifications subject to change without notice. E&OE. ©
R-19
MISCELLANEOUS
20
R-20
Specifications subject to change without notice. E&OE. ©
SECTION S
CONVERSION TABLES
REFERENCE TABLES
TECHNICAL
NOTES
& TABLES
•
This section contains notes on the design installation and
use of industrial pipe work systems for the distribution of
compressed air. It also contains numerous conversion and
reference tables associated with the use of compressed
air and compressed air equipment.
CONTENTS – TECHNICAL NOTES & TABLES
TOOLS
General Conversion Guide
3
Pressure Coversion Table
Torque Conversion Chart
Torque Conversion Factors
4
Water Vapour Content Table
5
Tap Shank Dimensions
6
Screw & Wire Gauges
Air Receiver Capacities
7
TECHNICAL NOTES & TABLES
CONTENTS
2
S-2
PAGE
Specifications subject to change without notice. E&OE. ©
4
5
8
TECHNICAL NOTES & TABLES
CONVERSION TABLE
3
GENERAL CONVERSION GUIDE
TO
Multiply by
(x)
millimetres (mm)
microns (µm)
1000
millimetres (mm)
inches (in)
Divide by
(÷)
Length
inches (in)
microns (µm)
TO CONVERT FROM
Area
square centimetres (sq cm)
square inches (sq in)
0.155
square inches (sq in)
square centimetres (sq cm)
6.4516
square inches (sq in)
square feet (sq ft)
square feet (sq ft)
square inches (sq in)
144
square feet (sq ft)
square metres (sq m)
0.0929
28.3168
millimetres of Mercury
(mm Hg)
7.525
kiloPascal (kPa)
metres of water (m H O)
0.102
kiloPascal (kPa)
inches of water (in H O)
4.021
kiloPascal (kPa)
pounds per square inch
(psi)
0.145
kiloPascal (kPa)
atmospheres (approx. at
sea level)
0.0098692
kiloPascal (kPa)
kilogram force/sq.
centimetre (kgf/cm²)
0.0101972
kiloPascal (kPa)
microns (vacuum)
7501.8755
kiloPascal (kPa)
torr (vacuum)
Bar
pounds per square inch
(psi)
14.503
0.1333
cubic feet (ft³)
cubic metres (m³)
cubic feet (ft³)
35.3147
cubic metres (m³)
cubic yard (yd³)
1.30795
Bar
kiloPascal (kPa)
100
cubic metres (m³)
US gallon (usg)
264.172
Bar
0.987
cubic metres (m³)
Imperial gallons (g)
219.969
atmospheres (approx. at
sea level)
litres (l)
28.3168
Bar
metres of water (m H O)
10.211
cubic feet (ft³)
Imperial gallons (g)
0.83267
Bar
millimetres of Mercury
(mm Hg)
75.247
US gallons (usg)
pounds per square inch (psi)
cubic feet per minute (cfm)
2.11888
atmospheres (approx. at
sea level)
0.068
litres per second (l/s)
litres per min (l/min)
cubic feet per minute (cfm)
pounds per square inch (psi)
inches of water (in H O)
27.27
kilograms per sq.
centimetre (kg/cm²)
0.07
metres of water (m H O)
0.704
28.3168
cubic metres per minute
(m³/min)
cubic feet per minute (cfm)
35.3147
pounds per square inch (psi)
cubic feet per minute (cfm)
litres per second (l/s)
0.47195
pounds per square inch (psi)
cubic feet per minute (cfm)
litres per min (l/min)
28.3168
pounds per square inch (psi)
inches of Mercury (in HG)
2.043
pounds per square inch (psi)
millimetres of Mercury
(mm Hg)
51.884
35.3147
cubic feet per minute (cfm)
cubic metres per minute
(m³/min)
US gallons per minute (gpm)
litres per second (l/s)
0.0630902
pounds per square inch (psi)
Bar
0.069
US gallons per minute (gpm)
cubic metres per minute
(m³/min)
0.00378541
pounds per square inch (psi)
kiloPascal (kPa)
6.894
US gallons per minute (gpm)
cubic feet per minute (cfm)
0.13368
Newton metres (Nm)
Imperial gallons per minute
(gpm)
0.83267
kilogram force.centimetre
(kgf-cm)
10.1972
US gallons per minute (gpm)
Newton metres (Nm)
kilogram force.metre
(kgf-m)
0.101972
kilograms (kg)
pounds (lb)
2.20462
Newton metres (Nm)
foot pounds (ft-lbf)
0.737562
kilograms (kg)
short (US) ton
0.00110321
Newton metres (Nm)
inch pounds (in-lbf)
8.8507
kg force-centimetre
(kgf-cm)
Newton metres (Nm)
0.098
kg force-metre (kgf-m)
Newton metres (Nm)
9.8067
Torque
Mass
kilograms (kg)
metric ton (tonne)
0.001
tonne
kilograms (kg)
1000
ounces (oz)
pounds (lb)
ounces (oz)
grams (g)
28.35
pounds (lb)
kilograms (kg)
0.453592
pounds (lb)
ounces (oz)
16
Newton (N)
kilopond (kp)
0.101972
Newton (N)
pound force (lbf)
0.224809
kiloPascal (kPa)
Pascals (Pa)
1000
kiloPascal (kPa)
pounds per square inch
(psi)
16
Force
Power
746
Watts (W)
horsepower (hp)
kilowatts (Kw)
horsepower (hp)
BTU/hour
Watts of refrigeration (W)
0.293071
kiloWatts of refrigeration
(kW)
3.51685
ton of refrigeration (T)
0.746
Pressure
TECHNICAL NOTES & TABLES
litres (l)
Flow
Divide by
(÷)
100
Bar
kiloPascal (kPa)
144
Volume
Multiply by
(x)
kiloPascal (kPa)
25.4
25400
TO
CONVERSION TABLES
TO CONVERT FROM
6.894
Specifications subject to change without notice. E&OE. ©
S-3
TECHNICAL NOTES & TABLES
CONVERSION TABLES
4
TECHNICAL NOTES & TABLES
CONVERSION TABLES
PRESSURE CONVERSION TABLE
S-4
pounds per square inch (psi) to kilopascals (kPa) to bar
psi
kPa
bar
psi
kPa
bar
psi
kPa
bar
2
14
0.14
52
359
3.59
102
703
7.03
4
28
0.28
54
372
3.72
104
717
7.17
6
41
0.41
56
386
3.86
106
731
7.31
8
55
0.55
58
400
4.00
108
745
7.45
10
69
0.69
60
414
4.14
110
758
7.58
12
83
0.83
62
427
4.27
112
772
7.72
14
97
0.97
64
441
4.41
114
786
7.86
8.00
16
110
1.10
66
455
4.55
116
800
18
124
1.24
68
469
4.69
118
814
8.14
20
138
1.38
70
483
4.83
120
827
8.27
22
152
1.52
72
496
4.96
122
841
8.41
24
165
1.65
74
510
5.10
124
855
8.55
26
179
1.79
76
524
5.24
126
869
8.69
28
193
1.93
78
538
5.38
128
883
8.83
30
207
2.07
80
552
5.52
130
896
8.96
32
221
2.21
82
565
5.65
132
910
9.10
34
234
2.34
84
579
5.79
134
924
9.24
9.38
36
248
2.48
86
593
5.93
136
938
38
262
2.62
88
607
6.07
138
951
9.51
40
276
2.76
90
621
6.21
140
965
9.65
42
289
2.89
92
634
6.34
142
979
9.79
44
303
3.03
94
684
6.84
144
993
9.93
46
317
3.17
96
662
6.62
146
1006
10.06
48
331
3.31
98
676
6.76
148
1020
10.20
50
345
3.45
100
689
6.89
150
1034
10.34
TORQUE CONVERSION CHART
This table gives you units from 1 to 100 with the appropriate torque conversion on either side
Examples: 1 Nm = 0.7 ft-lbf 62 ft-lbf = 84.1 Nm
Nm
Unit
ft-lbf
Nm
Unit
ft-lbf
Nm
Unit
ft-lbf
Nm
Unit
1.4
1
0.7
35.3
26
19.2
69.1
51
37.6
103.0
76
ft-lbf
56.0
2.7
2
1.5
36.6
27
19.9
70.5
52
38.3
104.4
77
56.8
4.0
3
2.2
38.0
28
20.6
71.9
53
39.0
105.1
78
57.5
5.4
4
3.0
39.3
29
21.3
73.2
54
39.8
107.1
79
58.3
59.0
6.8
5
3.7
40.7
30
22.1
74.6
55
40.6
108.5
80
8.1
6
4.4
42.0
31
22.9
75.9
56
41.3
109.8
81
59.7
9.5
7
5.1
43.4
32
23.6
77.3
57
42.0
111.2
82
60.5
10.9
8
5.9
44.7
33
24.3
78.6
58
42.8
112.6
83
61.2
12.2
9
6.6
46.1
34
25.0
80.0
59
43.5
113.9
84
62.0
13.6
10
7.4
47.5
35
25.8
81.3
60
44.2
115.2
85
62.7
15.0
11
8.1
48.8
36
26.6
82.7
61
45.0
116.7
86
63.4
16.3
12
8.9
50.2
37
27.2
84.1
62
45.7
118.0
87
64.1
17.6
13
9.6
51.5
38
28.0
85.4
63
46.5
119.3
88
64.9
19.0
14
10.3
52.9
39
28.8
86.8
64
47.2
120.0
89
65.6
20.3
15
11.0
54.2
40
29.5
88.1
65
47.9
122.0
90
66.4
21.7
16
11.8
55.6
41
30.2
89.5
66
48.7
123.4
91
67.1
23.0
17
12.5
57.0
42
31.0
90.8
67
49.4
124.7
92
67.9
24.4
18
13.2
58.3
43
31.7
92.2
68
50.2
126.1
93
68.6
25.8
19
14.0
59.7
44
32.5
93.6
69
50.9
127.5
94
69.3
27.1
20
14.8
61.0
45
33.2
94.9
70
51.6
128.9
95
70.0
28.5
21
15.5
62.4
46
33.9
96.3
71
52.4
130.2
96
70.8
29.8
22
16.2
63.7
47
34.7
97.6
98
53.1
131.6
97
71.5
31.2
23
17.0
65.0
48
35.4
99.0
73
53.8
132.9
98
72.2
32.5
24
17.7
66.4
49
36.1
100.3
74
54.6
134.2
99
73.0
33.9
25
18.4
67.8
50
36.9
101.7
75
55.3
135.6
100
73.8
Specifications subject to change without notice. E&OE. ©
TECHNICAL NOTES & TABLES
CONVERSION TABLE
5
TORQUE CONVERSION FACTORS
METRIC
INTERNATIONAL SYSTEM - S.I.
Converted
in-ozf
in-lbf
ft-lbf
cm-gf
cm-kgf
m-kgf
mN-m
cN-m
N-m
1 in-ozf=
1
0.0625
0.005
72
0.072
0.0007
7.062
0.706
0.007
1 in-lbf=
16
1
0.083
1152.1
1.152
0.0115
113
11.3
0.113
1 ft-lbf=
192
12
1
13,826
13.83
0.138
1356
135.6
1.356
1 cm-gf=
0.014
0.0009
0.00007
1
0.001
0.00001
0.098
0.01
0.0001
1 cm-kgf=
13.89
0.868
0.072
1000
1
0.01
98.07
9.807
0.098
1 m-kgf=
1389
86.8
7.233
100,000
100
1
9807
980.7
9.807
1 mN-m=
0.142
0.009
0.0007
10.2
0.01
0.0001
1
0.1
0.001
1 cN-m=
1.416
0.088
0.007
102
0.102
0.001
10
1
0.01
1 N-m=
141.6
8.851
0.738
10,197
10.2
0.102
1000
100
1
CONV. / REF. TABLES
IMPERIAL
Units to be
REFERENCE TABLE
WATER VAPOUR CONTENT OF FULLY SATURATED COMPRESSED AIR
Grams of water vapour per cubic metre (g/m³) of air at given temperature and pressure
AIR PRESSURE
ºC
Gauge Pressure - bar
0.00
0.40
0.63
1.00
1.60
2.50
4.00
6.30
8.00
10.00
12.50
16.00
20.00
0
4.82
3.45
2.97
2.42
1.87
1.39
0.97
0.67
0.54
0.44
0.36
0.29
0.23
5
6.88
4.93
4.24
3.46
2.68
1.99
1.39
0.95
0.77
0.63
0.52
0.41
0.33
10
9.41
6.74
5.80
4.73
3.66
2.72
1.90
1.30
1.06
0.87
0.70
0.56
0.45
15
12.70
9.08
7.83
6.39
4.94
3.67
2.56
1.67
1.43
1.17
0.95
0.76
0.61
20
17.40
12.50
10.70
8.75
6.77
5.02
3.51
2.41
1.95
1.60
1.30
1.04
0.84
25
23.60
16.90
14.60
11.90
9.18
6.82
4.77
3.27
2.65
2.17
1.77
1.40
1.14
30
30.50
21.80
18.80
15.30
11.90
8.81
6.16
4.22
3.43
2.81
2.29
1.81
1.47
35
39.00
27.90
24.00
19.60
15.20
11.30
7.87
5.40
4.38
3.59
2.92
2.32
1.88
40
49.60
35.50
30.60
24.90
19.30
14.30
10.00
6.87
5.57
4.55
3.72
2.95
2.39
45
63.50
45.50
39.20
31.90
24.70
18.30
12.80
8.79
7.13
5.84
4.76
3.77
3.06
50
81.00
58.00
49.90
40.70
31.50
23.40
16.40
11.20
9.10
7.45
6.07
4.82
3.90
Example: 1 m³ of saturated air at atmospheric pressure (0 bar gauge) and
25°C contains 23.6 grams (g) of water vapour. If this air was compressed
to 6.3 bar(90 psi) and its temperature rose to 50°C it would only be able to
retain 11.2g of water vapour and 12.4 g (23.6 - 11.2) of vapour would be
released as liquid water.
If the compressed air was then cooled to 25°C in an air receiver it would only
be able to retain 3.27 g of water vapour and 7.93 g (11.2 - 3.27) would be
released as liquid water in the air receiver.
If the compressed air was then passed through a refrigerated dryer and its
temperature further reduced to 5°C it would only be able to retain 0.95 g of
water vapour at 6.3 bar and a further 2.32 g (3.27 - 0.95) of vapour would be
condensed out.
This example shows how a refrigerated dryer (or other type of air dryer) can
be used to supply much dryer compressed air than can be got directly from
the compressor.
Specifications subject to change without notice. E&OE. ©
TECHNICAL NOTES & TABLES
AIR TEMP
S-5
TECHNICAL NOTES & TABLES
REFERENCE TABLE
6
REFERENCE TABLE
TAP SHANK DIMENSIONS
DIN
JIS
Metric
UNC /
WHIT.
A
B
Sq.
DIN
371
A
B
Dimensions
Dia.
Sq.
ANSI (USA)
Metric
A
3.0
2.5
M1
M1
2.5
2.1
M3
M3
4.0
3.2
M1.1
M1.1
2.5
2.1
M3.5
Dimensions
B
M2
Dia.
Screw
Sq.
Size
Fractional
Diameter
A
B
1/16"
2.24
1.80
0
2.50
2.10
1
M4.5
5.0
4.0
M1.2
M1.2
2.5
2.1
M2.2
2.80
2.24
2
M5
M5.5
5.5
4.5
M1.4
M1.4
2.5
2.1
M2.5
2.80
2.24
3
6.0
4.5
M1.6
M1.6
2.5
2.1
M3
3.15
2.50
4
1/4"W
M8
M7
M10
M9
M11
M15
3/32"
Dia.
(in)
Sq.
(in)
0.141
0.110
0.141
0.110
0.141
0.110
0.141
0.110
0.141
0.110
6.1
5.0
M1.8
M1.8
2.5
2.1
M4.5
M3.5
3.55
2.80
5
5.0
M2
M2
2.8
2.1
M5
M4
4.00
3.15
6
3/8"W
7.0
5.5
M2.2
M2.2
2.8
2.1
M6
4.50
3.55
8
5/32"
0.168
0.131
7/16"W
8.0
6.0
M2.5
M2.5
2.8
2.1
5.00
4.00
10
3/16"
0.194
0.152
0.220
0.165
1/4"
0.255
0.191
0.238
M5
1/8"
Dimensions
6.2
M12
M14
M4
Nominal
Number
M4
5/16"W
TECHNICAL NOTES & TABLES
Dia.
DIN
352
M2
M6
S-6
Dimensions
ISO
0.141
0.110
0.141
0.110
8.5
6.5
M3
M3
3.5
2.7
M8
M6
6.30
5.00
12
9/16"W
10.5
8.0
M3.5
M3.5
4.0
3.0
M10
M8
8.00
6.30
14
5/8"W
M12
9.00
7.10
5/16"
0.318
10.00
8.00
3/8"
0.381
0.286
12.0
9.0
M4
M4
4.5
3.4
M16
12.5
10.0
M5
M5
6.0
4.9
M17
13.0
10.0
M6
M6
6.0
4.9
M14
11.20
9.00
7/16"
0.323
0.242
0.275
M18
3/4"W
M20
M22
7/8"W
M24
M25
M26
M27
1"W
M28
1-1/8"W
M30
M32
1-1/4"W
M33
M34
M35
M36
M38
M39
M40
1-3/8"W
M10
14.0
11.0
M8
6.0
4.9
M16
12.50
10.00
1/2"
0.367
15.0
12.0
M10
7.0
5.5
M18
14.00
11.20
9/16"
0.429
0.322
17.0
13.0
M8
8.0
6.2
M20
14.00
11.20
5/8"
0.480
0.360
19.0
15.0
9.0
7.0
M22
16.00
12.50
11/16"
0.542
0.406
20.0
15.0
M10
10.0
8.0
M24
18.00
14.00
3/4"
0.590
0.442
21.0
17.0
11.0
9.0
M27
20.00
16.00
13/16"
0.652
0.489
0.523
M12
M14
22.0
17.0
M16
12.0
9.0
M30
20.00
16.00
7/8"
0.697
23.0
17.0
M18
14.0
11.0
M33
22.40
18.00
15/16"
0.760
0.570
24.0
19.0
M20
16.0
12.0
M36
25.00
20.00
1"
0.800
0.600
0.672
25.0
19.0
M22
18.0
14.5
M39
28.00
22.40
1-1/16"
0.895
26.0
21.0
M24
18.0
14.5
M42
28.00
22.40
1-1/8"
0.896
0.672
28.0
21.0
M27
20.0
16.0
M45
31.50
25.00
1-3/16"
1.021
0.766
1-1/2"W
30.0
23.0
M30
22.0
18.0
M48
31.50
25.00
1-1/4"
1.021
0.766
M42
1-5/8"W
32.0
26.0
M33
25.0
20.0
M52
35.50
28.00
1-5/16"
1.108
0.831
M45
1-3/4"W
35.0
26.0
M36
28.0
22.0
M56
35.50
28.00
1-3/8"
1.108
0.831
M48
1-7/8"W
38.0
29.0
M39
32.0
24.0
M60
40.00
31.50
1-7/16"
1.233
0.925
M42
32.0
24.0
M64
40.00
31.50
1-1/2"
1.233
0.925
M45
36.0
29.0
1-5/8"
1.305
0.979
PT
PF
1/8"
1/8"
8.0
6.0
M48
36.0
29.0
1-3/4"
1.430
1.072
1/4"
1/4"
11.0
9.0
M52
40.0
32.0
1-7/8"
1.519
1.139
3/8"
3/8"
14.0
11.0
M56
45.0
35.0
2"
1.644
1.233
1/2"
1/2"
18.0
14.0
M60
45.0
35.0
1/16" NPT
0.3125
0.2340
5/8"
19.0
15.0
1/8" NPT
0.4375
0.3280
0.4210
3/4"
1"
3/4"
23.0
17.0
1/4" NPT
0.5625
7/8"
24.0
19.0
3/8" NPT
0.7000
0.5310
1"
26.0
21.0
1/2" NPT
0.6875
0.5150
1-1/8"
28.0
21.0
3/4" NPT
0.9063
0.6790
1-1/4"
1-1/4"
32.0
26.0
1" NPT
1.1250
0.8430
1-3/8"
1-3/8"
35.0
26.0
1-1/4" NPT
1.3125
0.9840
1-1/2"
1-1/2"
38.0
29.0
1-1/2"
NPT
1.5000
1.1250
Specifications subject to change without notice. E&OE. ©
TECHNICAL NOTES & TABLES
REFERENCE TABLE
7
WOOD SCREW GAUGE - IMPERIAL STANDARD WIRE GAUGE
Screw Gauge
(S.G.)
Fraction
of an Inch
Decimal
of an Inch
mm
30
0.01240
0.3150
29
0.01360
0.3454
28
1/64"
0.01480
0.3759
0.01563
0.3969
27
0.01640
0.4166
26
0.01800
0.4572
25
0.02000
0.5080
24
0.02200
0.5588
23
0.02400
0.6096
22
1/32"
0.02800
0.7112
0.03125
0.7938
10
6
13/64"
11
5
7/32"
12
4
13
15/64"
14
0.8128
0.9144
19
0.04000
1.0160
15
0.04688
1.1906
16
0.04800
1.2192
0.05400
1.3716
0.05600
1.4224
000
0.05700
1.4478
00
0.06000
1.5240
17
1/16"
0
16
1
15
5/64"
0.06250
1.5875
0.06300
1.6002
0.06400
1.6256
0.06600
1.6764
0.07200
1.8288
0.07813
1.9844
14
0.08000
2.0320
13
0.09200
2.3368
3/32"
3
12
4
7/64"
11
5
1/8"
10
6
9/64"
9
7
5/32"
8
8
11/64"
7
0.09375
2.3813
0.09400
2.3876
0.10400
2.6416
0.10800
2.7432
0.10938
2.7781
0.11600
2.9464
0.12200
3.0988
0.12500
3.1750
1/4"
3
2
9/32"
17
1
18
5/16"
0
20
11/32"
00
22
000
3/8"
24
0000
13/32"
26
00000
7/16"
28
000000
0.12800
3.2512
30
0.13600
3.4544
32
0.14063
3.5719
36
0.14400
3.6576
0000000
Decimal
of an Inch
mm
0.187500
4.7625
0.192000
4.8768
0.203125
5.1594
0.206000
5.2324
0.212000
5.3848
0.218750
5.5563
0.220000
5.5880
0.232000
5.8928
0.234000
5.9436
0.234375
5.9531
0.248000
6.2992
0.250000
6.3500
0.252000
6.4008
0.262000
6.6548
0.276000
7.0104
0.281250
7.1438
0.290000
7.3660
0.300000
7.6200
0.304000
7.7216
0.312500
7.9375
0.324000
8.2296
0.332000
8.4328
0.343750
8.7313
0.348000
8.8392
0.360000
9.1440
0.372000
9.4488
0.375000
9.5250
0.388000
9.8552
0.400000
10.1600
0.406250
10.3188
0.416000
10.5664
0.432000
10.9728
0.437500
11.1125
0.444000
11.2776
0.464000
11.7856
15/32"
0.468750
11.9063
0.472000
11.9888
1/2"
0.500000
12.7000
0.556000
14.1224
9/16"
0.562500
14.2875
0.15000
3.8100
0.612000
15.5448
0.15625
3.9688
40
5/8"
0.625000
15.8750
0.16000
4.0640
11/16"
0.687500
17.4625
0.16400
4.1656
3/4"
0.750000
19.0500
0.17188
4.3656
13/16"
0.812500
20.6375
0.17600
4.4704
7/8"
0.875000
22.2250
0.17800
4.5212
15/16"
0.937500
23.8125
Specifications subject to change without notice. E&OE. ©
TECHNICAL NOTES & TABLES
0.03200
0.03600
0000
Fraction
of an Inch
3/16"
21
3/64"
9
Imp. Std.
Wire Gauge
(S.W.G.)
20
18
2
Screw
Gauge
(S.G.)
REFERENCE TABLE
INCH EQUIVALENTS - MM EQUIVALENTS
Imp. Std.
Wire Gauge
(S.W.G.)
S-7
TECHNICAL NOTES & TABLES
REFERENCE TABLE
8
AIR RECEIVER CAPACITIES
TECHNICAL NOTES & TABLES
REFERENCE TABLE
RECEIVER SIZE
S-8
VOLUME
RECEIVER SIZE
mm
litres
cubic metres
U.S. Gallons
Imperial Gallons
Cubic Feet
Inches
178 x 305
11
0.01076
2.84
2.37
0.38
7 x 12
254 x 457
21
0.02124
5.61
4.67
0.75
10 x 18
305 x 610
50
0.04955
13.09
10.90
1.75
12 x 24
305 x 914
71
0.07079
18.70
15.58
2.50
12 x 36
381 x 914
113
0.11326
29.90
24.92
4.00
15 x 36
381 x 1219
142
0.14158
37.40
31.15
5.00
15 x 48
381 x 1524
177
0.17698
46.75
38.94
6.25
15 x 60
457 x 1219
184
0.18405
48.60
40.50
6.50
18 x 48
457 x 1524
227
0.22653
59.80
50.00
8.00
18 x 60
457 x 1829
269
0.26900
71.00
59.00
9.50
18 x 72
572 x 1219
340
0.33979
90
75
12
22.5 x 48
572 x 1524
425
0.42474
112
93
15
22.5 x 60
572 x 1829
510
0.50969
135
112
18
22.5 x 72
572 x 2134
595
0.59464
157
130
21
22.5 X 84
762 x 1524
708
0.70790
187
156
25
30 x 60
762 x 1829
849
0.84948
224
187
30
30 x 72
762 x 2134
991
0.99106
262
218
35
30 x 84
762 x 2438
1133
1.13264
299
249
40
30 x 96
914 x 1829
1359
1.35917
359
299
48
36 x 72
914 x 2438
1756
1.75560
464
386
62
36 x 96
914 x 3048
2152
2.15202
568
473
76
36 x 120
42 x 84
1067 x 2134
2209
2.20865
583
486
78
1067 x 2438
2435
2.43518
643
536
86
42 x 96
1067 x 3048
2973
2.97318
785
654
105
42 x 120
1067 x 3658
3511
3.51118
972
772
124
42 x 144
48 x 84
1219 x 2134
2832
2.83160
748
623
100
1219 x 2438
3171
3.17139
838
698
112
48 x 96
1219 x 3048
3908
3.90761
1032
860
138
48 x 120
1219 x 3658
4616
4.61551
1219
1015
163
48 x 144
1372 x 3048
5069
5.06856
1339
1115
179
54 x 120
1372 x 3658
5975
5.97468
1578
1314
211
54 x 144
1372 x 4572
7334
7.33384
1937
1613
259
54 x 180
1524 x 3658
7447
7.44711
1967
1638
263
60 x 144
1524 x 4572
9231
9.23102
2438
2031
326
60 x 180
Specifications subject to change without notice. E&OE. ©
SECTION T
NOTES ON
COMPRESSED AIR
NOTES ON SAFETY
NOTES ON
COMPRESSED
AIR
•
This section contains general notes on the use of, and safety
precautions with, compressed air and compressed air tools.
CONTENTS – NOTES ON COMPRESSED AIR
CONTENTS
Why Use Compressed Air?
3
Why Use Air Tools?
Safety With Compressed Air
Safety With Air Tools
3
NOTES ON COMPRESSED AIR
CONTENTS
2
T-2
PAGE
Specifications subject to change without notice. E&OE. ©
4
5
WHY USE COMPRESSED AIR
The most common energy systems used by Industry are Electric, Hydraulic, and
Pneumatic. Of these, the Pneumatic or compressed air system has the most readily
available medium – air.
There are no sparks or electric shocks with compressed air systems so they are more
suitable for use in inflammable environments.
Generally compressed air equipment is smaller, simpler in operation, and more robust
than equivalent electrically powered equipment. With fewer moving parts, wear and tear
is less and maintenance costs are lower. For these reasons compressed air is widely
used in the Manufacturing, Process and Service Industries as well as in Construction
and Mining.
You can use Compressed Air for drilling, screwdriving, bolt tightening, nut running,
grinding, sanding, polishing, chipping, deburring, wire brushing, descaling,
deslagging, scabbling, compacting, cutting, sawing, pumping, paint spraying, blast
cleaning, pressure lubricating, lifting and more.
The following advantages of Air Tools will help to improve productivity
and product quality:
•
SAFE no sparks, no electric shocks
•
CLEAN do not leak oil
•
STRONG long lasting metal and composite construction
•
COMPACT smaller than electric tools of equivalent power
•
DURABLE do not burn out with overloading
•
RELIABLE simple in operation
•
ERGONOMIC high power-to-weight ratio
•
CONVENIENT no electric lead regulations
•
VERSATILE can be used under water and in explosive conditions
•
SECURE not so easy to use at home
Specifications subject to change without notice. E&OE. ©
NOTES ON COMPRESSED AIR
WHY USE AIR TOOLS
WHY USE COMPRESSED AIR
Compressed Air is a clean, safe, reliable and versatile source of power which is simple
and economical to use and can be harnessed in numerous ways to make light work of
many industrial operations. You can overload compressed air equipment, even to stall,
without damaging the motor or actuator.
3
T-3
SAFETY WITH COMPRESSED AIR
NOTES ON COMPRESSED AIR
SAFETY WITH COMP. AIR
4
T-4
Compressed Air stores energy which if released accidentally is capable of causing
serious injury or even death to persons in the area of the incident.
When using compressed air and compressed air equipment the following
precautions must be taken:
•
Ensure all hose fittings are tightened at the tool, at the compressed air source and
wherever they occur between these two points, before connecting the hose.
•
When connecting air hoses, check for wear in the fittings so as to avoid accidental
release leading to hose-whip which can cause serious injury.
•
In the case of long lengths of hose install an in-line check valve to prevent hose whip.
•
Do not drive vehicles or machinery over hose or fittings as this can result in damage
to the fittings and kinking or nicking of the hose which can lead to failure and cause
serious injury.
•
Do not allow a jet of compressed air to blow on any part of the body. This is
especially dangerous to the eyes but can also injure other parts of the body.
Eliminate the danger of the jet by deflecting it in another direction.
•
Never point blow guns or air hoses directly at any part of the body or at somebody
else. Always use the Personal Protective Equipment (PPE) recommended for any
particular task.
•
Avoid inhalation of airborne substances e.g. oil fog from exhausts, condensation and
rust particles from the pipe work, dirt picked up by hose ends and condensation
from the air receiver.
•
Appoint a responsible person to ensure the compressed air system is properly
maintained. Air lines and air receivers should be drained daily. Air receivers should
be checked by a qualified boiler inspector every 2 years.
Specifications subject to change without notice. E&OE. ©
SAFETY WITH AIR TOOLS
DRILLS
5
Large drills should always be equipped with safety, self releasing throttles which shut
off the air supply to the drill as soon as the handle is released.
The following points should be remembered when using twist
drills, taps or reamers:
•
Properly sharpened twist drills and reamers, and the proper selection of drill
speed reduce the feed pressure required and also the risk of breakage due to high
breakthrough torque.
•
It is very easy to vary the speed of an air drill. Start at low speed until the drill is well
centred, then increase to full operating speed for the remainder of the operation.
•
Reduce dangerous kickback by easing up on feed pressure at the instant of
breakthrough.
GRINDERS
GENERAL
Accidents with grinders can be fatal. The greatest hazard when using grinders is wheel
breakage. Attention is drawn to Australian Standard 1788.1 – 1987 Abrasive Wheels
– Design, Construction and Safeguarding and Australian Standard 1788.2 – 1987
Abrasive Wheels – Selection, Care and Use.
Accidents can be minimized by observing the following rules:
•
Store wheels properly and handle carefully.
•
Select the right wheel for the job.
•
Always use a correctly designed wheel guard.
•
Inspect the wheel visually before mounting.
•
Mount wheels correctly.
•
Use correct Personal Protective Equipment (PPE).
•
Avoid excessive wheel speed.
•
Do not “bump” the wheel when starting to grind or when grinding.
•
Do not use excessive pressure. Allow the wheel to do the work.
NOTES ON COMPRESSED AIR
Put on eye protection before using a drill. Beware of chips lodged in drill bit flutes that
can easily become embedded in your eyes. Never wear loose clothing when operating a
drill. Clothing is easily caught by the drill bit or the chuck. Where necessary, use barriers
behind the work to prevent people
from being injured as the drill breaks through the other side of the work.
SAFETY WITH AIR TOOLS
Always exercise caution when using large air drills. Place yourself in a position where
you have ample and safe footing.
Suitable racks, bins or drawers should be provided for wheels and tools. Stored wheels
must not be subject to extremes of temperature and humidity. Wheels should be stored
Specifications subject to change without notice. E&OE. ©
T-5
NOTES ON COMPRESSED AIR
SAFETY WITH AIR TOOLS
6
T-6
according to type, size and speed with all bins clearly marked. Particular care should be
exercised, when handling wheels, to avoid dropping and bumping. The finest crack can
cause some wheels to explode in use.
Portable grinders should have the Manufacturer’s nameplate attached, indicating the
rated speed and rated air pressure of the tool. The label on the grinding wheel should
show the Maximum Safe Operating Speed (MOS).
Always use a wheel with a Maximum Safe Operating Speed that is equal to or greater
than the rated speed of the grinder. Never use a wheel with a missing label. Straight
wheels, cupped wheels and depressed centre wheels must be used with protective
guards. Always use the guard supplied with the grinder. If the type of wheel being used
is changed, obtain a suitable guard from the tool manufacturer.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Personal Protective Equipment should be selected in accordance with SAA HB9 – 1994
Occupational Personal Protection and subsequent related Australian Standards. In
general, with respect to grinding:
•
Always wear eye protection.
•
Always wear face protection.
•
Always wear hearing protection.
•
Always wear breathing protection.
•
Always wear protective clothing.
USING STRAIGHT GRINDING WHEELS (TYPE 1)
When mounting straight, unthreaded wheels always use heat treated inner and outer
wheel flanges with equal outside diameters and matched recesses in accordance with
AS 1788.1 – 1987. These flanges are supplied with the tool by the tool manufacturer.
Never substitute soft washers which spread when tightened.
Always observe the following points:
•
Never use a straight wheel without labels (also known as blotters). Wheel flanges
should always clamp against labels, never against the bare wheel. On properly
manufactured grinding wheels the labels or blotters are designed to distribute the
clamping force evenly around the wheel.
•
The inside diameter of the wheel and the outside diameter of the grinder spindle
must always be the same nominal size. The threaded portion of the spindle should
allow full nut mounting and the thread should extend inside the outer flange.
•
Tighten the spindle end-nut carefully with a hand wrench. Over tightening can
cause wheel breakage.
•
Always use a wheel guard that is designed for use with the grinder. Make sure the
guard is the correct size for the wheel being used.
•
When flanges are not matched, stresses are set up in the wheel which can cause
wheel breakage and possible serious damage or injury.
Specifications subject to change without notice. E&OE. ©
Wheel breakage can also occur when:
An outer flange is omitted.
•
An outer flange is reversed.
•
A washer is substituted for a flange.
7
USING STRAIGHT CUTTING OFF WHEELS (TYPE 1)
When using straight cutting off wheels the tool being used must meet the
following requirements:
Have adequate power. It is best to have reserve power to ensure efficiency.
•
Have adequate speed. Abrasive cutting operations generate a great deal of localized
heat which causes rapid expansion of the piece being cut. Wheels being operated
at speeds significantly lower than the recommended Maximum Operating Speed will
generate excessive heat leading to rapid wheel deterioration and breakage.
•
Have heavy duty bearing support for the spindle. Spindle run-out will result in rough
cutting causing rapid wheel wear leading to wheel breakage and possible serious
damage or injury.
•
Have correct wheel flanges with outside diameters and recesses in accordance
with AS 1788.1 – 1987.
•
Have correct wheel guarding in accordance with AS 1788.1 – 1987.
•
Be maintained in first class condition.
•
All of the above points should be routinely checked and substandard conditions
corrected.
Points for basic cutting procedure:
•
Be sure the work is securely clamped - both sides of the cut, if practical.
•
Start the cut gently. Do not “bump” the wheel to make a start.
•
Feed the wheel through the work as fast as possible without slowing it.
•
Feed the wheel through the work as smoothly as possible. Don’t “baby” the wheel
through the cut. If the wheel is fed through the work unevenly the cutting edge
could be damaged leading to fraying, “grabbing” and wheel breakage.
USING CUP WHEELS (TYPE 11)
Most cup wheels that are mounted on vertical grinders have threaded steel bushings
moulded into the wheel. These wheels are simply screwed on to the end of the threaded
tool spindle, which is usually 5/8” (16mm) in diameter. The back flange for such wheels
should be flat and unrelieved. Never use a recessed flange with a cup wheel as this
has the tendency to pull the bushing out of the wheel when it is tightened down on the
shaft. See AS 1788.1 – 1987 for the correct way to mount cup wheels.
USING CONE AND PLUG WHEELS (TYPES 16, 17, 18 & 19)
Cone and plug wheels have blind threaded bushings which screw on to the spindles of
straight grinders. In this case the grinder spindle must be shorter than the depth of the
hole in the bushing. When the spindle is longer than the hole in the bushing it pushes on
the bottom of the hole and tends to crack the top off the cone or plug.
NOTES ON COMPRESSED AIR
•
SAFETY WITH AIR TOOLS
•
If the spindle is too long, use a properly machined flat spacer to give the required thread
Specifications subject to change without notice. E&OE. ©
T-7
NOTES ON COMPRESSED AIR
SAFETY WITH AIR TOOLS
8
T-8
clearance and to support the back of the threaded bush. Never use relieved flanges or
spacers as these will pull the bushing out of the wheel. Never use a spacer that makes
the engagement of the threaded spindle too short. When this is done it is almost certain
that the bushing will break and pull out of the wheel.
USING DEPRESSED CENTRE WHEELS (TYPES 27 & 28)
Because of their shape and usage Type 27 & 28 wheels require specially designed
backing flanges and locking nuts as described in AS 1788.1 – 1987.
For type 27 & 28 wheels the locking nut fits within the depressed centre of the wheel to
prevent interference when side grinding, and serves to drive the wheel by clamping it
against the depressed portion of the backing flange.
Mounts which are fixed to the wheel by the manufacturer should not be re-used as
back-up flanges for un-mounted wheels.
Type 27 & 28 wheels must only be used with a safety guard mounted on the tool
between the wheel and the operator.
The variation in flange diameters, the fact that the locking nut is less than one third of the
wheel diameter and the exertion of side pressure during the grinding process limits the
construction of depressed centre wheels to reinforced organic bonded types.
When using reinforced depressed centre grinding wheels the minimum recommended
angle between the wheel and the work is 15 degrees.
USING MOUNTED WHEELS (POINTS)
The Maximum Safe Operating Speed for mounted wheels is determined by the
following factors:
•
Shape and size of mounted wheel.
•
Size of mandrel (shank).
•
Overhang of mandrel.
•
Wheel specifications.
The Maximum Operating Speeds for medium and high strength mounted wheels having
2.4mm, 3.2mm, 4.8mm or 6.4mm diameter mandrels operating with various overhangs from
12mm to 125mm are given in AS 1788.1 – 1987. The wheel manufacturer’s specifications
must be checked to see whether the wheels are low, medium or high strength. If the
specification indicates a low strength wheel, the Maximum Operating Speed recommended
by the wheel manufacturer must not be exceeded.
When using mounted wheels always observe the following points:
•
Before selecting air tool, check wheel manufacturer’s instructions for correct
operating speed.
•
Before starting grinder, read the operating instructions supplied with the tool.
•
Before starting job, put on the necessary Personal Protective Equipment (PPE) as
earlier described.
•
Before engaging work, run grinder under bench at full speed for one minute.
•
Do not use wheels that have been dropped or show any evidence of damage.
•
Regardless of shank length have at least 10mm of shank clamped in the collet of
the grinder.
Specifications subject to change without notice. E&OE. ©
Wheels with long shanks should be placed inside the hollow work piece or groove before
starting grinder.
•
Do not continue to use a wheel that evidences hammering when first engaging the work. This
indicates excessive spindle run-out, damage to the head of the wheel or a bent shank, all of
which can cause wheel breakage leading to property damage or serious injury.
USING TUNGSTEN CARBIDE BURS
The recommended cutting speeds for Tungsten Carbide Burs vary with the material being
machined and the desired finish. The bur manufacturer’s operating instructions should be
consulted with respect to these factors in order to determine the correct bur speed for a
particular job and therefore the correct tool to be used.
When using carbide burs always observe the following points:
Before selecting air tool, consult bur manufacturer’s instructions for correct operating speed
for the bur to do the particular job on hand.
•
Refer to the bur manufacturer’s instructions for the power of the tool to be used.
•
Before starting grinder, read the operating instructions supplied with the tool.
•
Before starting the job put on the necessary Personal Protective Equipment (PPE) as earlier
described. In particular use the correct type of respirator as recommended by the bur
manufacturer.
•
Do not use burs that have been dropped or show any evidence of damage to the flutes.
•
Burs can be damaged by dropping, using a grinder with excessive spindle run-out or running
with too much shank out of the collet.
•
Do not continue to use a bur which evidences hammering when first engaging the work. This
indicates excessive spindle run-out, damage to the head of the bur or a bent shank.
•
Misuse of burs can cause weakening of the brazing between the head and the shank and
lead to the head coming off while in use and causing serious injury.
GRINDER SPEEDS
Check grinder speeds regularly with a tachometer. If the grinder exceeds the speed on the name
plate, or body of the tool, have it serviced immediately. An increase in the sound output of a tool
is an indication that its operating speed may have increased. Speed changes can be caused by
dirty compressed air fouling the speed governor inside the tool. Always use filters and lubricators
on air lines.
LOCK-OFF THROTTLES
Always prefer a lock-off throttle if this is an available option. This should especially be the case on
larger, more powerful grinders. Lock-off throttles prevent accidental start-up as the operator must
unlock the throttle before starting the tool. The throttle automatically returns to the locked-off
position when released.
MOUNTING A NEW WHEEL
When mounting a new grinding wheel onto a tool remember the
following points:
•
NOTES ON COMPRESSED AIR
•
9
SAFETY WITH AIR TOOLS
•
Check the speed of the tool with a tachometer.
Specifications subject to change without notice. E&OE. ©
T-9
Always check recommended wheel speed against grinder speed.
10
•
Never use a wheel with a Maximum Safe Operating Speed less than the free speed of the
tool.
SAFETY WITH AIR TOOLS
•
Select correct wheel guard before using tool.
•
Re-install the guard when a new wheel is mounted.
•
It is a good idea to colour code wheels, guards, flanges and machines.
•
After the wheel has been fitted, run the grinder under a steel bench, in a steel pipe or in a
steel casting for at least one minute at full throttle. If the wheel breaks under these conditions,
re-check the wheel speed, the grinder speed and the method of mounting the wheel. This
test should also be applied to grinders that have been dropped or have been out of use.
NOTES ON COMPRESSED AIR
•
T-10
GRINDING PRACTICE
Even properly mounted and guarded grinding wheels can be fractured by misuse. Wheels should
make smooth contact with the work without any bumping action. Forced grinding which slows
down the air motor should also be avoided. Never grind against the side of a straight wheel.
Safety goggles or face shields are a must when sanding and grinding. Safety aprons, and
properly fitted protective clothing should be used in prolonged grinding. Never wear loose
clothing.
Protective barriers should be used to prevent grinding operations from causing damage or injury
to others.
When grinding, the following points should also be remembered:
•
Sparks are hot molten metal.
•
Respirators should be used if ventilation is not adequate and always with
tungsten carbide burs.
•
Never grind in flammable atmospheres or near flammable mixtures or materials.
NOISE
Apart from being a nuisance, noise can also cause permanent hearing damage. Even when a
grinding tool has been designed to minimize its sound output, the combined sound level of the
grinder plus the work noise could still be damaging to the operator’s ears and ear protection
should always be worn. Where an operator is exposed to high sound levels, the time of exposure
may also have to be limited.
IMPACT WRENCHES
When installing or removing large bolts and nuts, the use of hand wrenches with extensions can
cause accidents. It is usually safer to use an impact wrench.
Impact wrenches have little reaction or kick. They deliver a large amount of torque for their size
and weight. A 100kg man on the end of a 1.5 metre bar cannot deliver as much torque as an
impact wrench weighing 11.5kg.
Impact grade sockets should always be used with impact wrenches.
When winding out a bolt or nut in a confined space make sure your hand does not get jammed as
the tool moves back.
Specifications subject to change without notice. E&OE. ©
SECTION U
TERMS AND
CONDITIONS
OF TRADE
•
This section contains the terms and conditions of trade
under which all items in this Catalogue are sold.
TERMS AND
CONDITIONS OF TRADE
2
INDUSTRIAL AIR TOOLS
TERMS AND CONDITIONS OF TRADE
Terms and Conditions of Trade
U-2
1. Definitions
“Seller” and “Supplier” means INDUSTRIAL AIR
TOOLS ABN 90 519 840 717 except where the
context requires otherwise.
“Customer” means the Customer whose order for
the purchase of goods is accepted by the Seller.
“Goods” means the goods sold to the Customer by
the Seller. “Terms and Conditons” means the Terms
and Conditions contained in this document.
2. Responsibility
Where the consumer guarantees do not apply to
the sale between the Seller and the Customer,
and to the extent permissible by law, it is the
Customer’s responsibility to ensure the Goods
purchased are suitable and safe for the intended
use and that the Customer has the necessary
expertise to make this decision.
3. Conditions
These Terms and Conditions shall apply to every
sale contract and sale of goods between Seller
and Customer. Any terms and conditions on the
Customer’s order or any statement by Customer
deviating from or inconsistent with these Terms
and Conditions are expressly rejected by the Seller.
An accepted order is not cancellable. No agent or
distributor of the Seller has authority to add to, vary
or contradict these Terms and Conditions.
4. Not obliged to accept orders
The Seller is not obliged to accept any orders from
the Customer. No tender or quotation from the
Seller obliges the Seller to accept any order from a
Customer. But if the Customer does place an order
with the Seller then it becomes binding from the
moment the Seller accepts the order even if the
Seller does not tell the Customer that it has been
accepted.
5. Conditions overrule any other form
These Terms and Conditions prevail even if they
are inconsistent with anything in any earlier or later
order form or similar document.
6. Prices and Goods and Services Tax (GST)
All prices are subject to change without notice. As a
wholesale company prices shall be shown excluding
GST and the current percentage GST shall be added.
The Seller may increase any agreed sale price after
the Seller accepts an order, to cover the full amount
of any increases in GST or other taxes and duties
such as customs duty, sales taxes, consumption
taxes and stamp duty which the Seller incurs in
connection with a transaction after the date of the
Customers order.
7. Delivery
The Seller reserves the right to apply a freight charge
where, in the Seller’s opinion, the cost of delivery
is not covered by the current price structure. The
Seller also reserves the right to apply fuel levy.
The Seller is entitled to invoice the Customer for
alternative packaging or delivery arrangements.
If the Seller agrees to arrange delivery elsewhere
the Seller will deliver any Goods ordered by the
Customer at the Customer’s cost. The Seller may
dispatch an order in one or more instalments. In that
case the Customer must pay separately for each
instalment and each instalment becomes a separate
contract. Non-delivery of one instalment does not
affect the contracts for the other instalments that
are delivered or are to be delivered. If part of an
order for any Goods is not collected or accepted by
the Customer for any reason the Seller may place
such Goods in storage, including at or on the Sellers
premises. The Customer must pay the Seller for all
expenses incurred in relation to storing any Goods
not collected or accepted and in any case not less
than the commercial value of the storage space
occupied by the Goods. The Customer takes all of
the risk associated with the Goods in all respects
from the time of delivery or, if the Seller stores
Goods that are ready for delivery then from the time
that the Seller notifies the Customer that the Goods
are held in storage.
8. Delivery time
Delivery times are estimates only and the Seller is
not liable for minor delays in delivery. The Customer
is not relieved of any obligation to accept or pay for
Goods by reason of any delay in delivery
9. Shortages
All items listed on the Seller’s invoice will be deemed
to have been received in good order and condition,
without shortage, unless the Seller is notified in
writing to the contrary within seven (7) days of
the delivery date. When the Customer signs any
delivery or consignment note or similar document
on receipt of a delivery, that is conclusive evidence
that the Customer received the delivery without any
shortage or damage that would have been visible on
taking delivery without unpacking the goods. The
Customer carries all risk of goods in transit where
the Customer arranges for carriage.
10. Passing of Risk
The risk in the Goods sold passes to the Customer
at the point of delivery at the Supplier’s warehouse
unless otherwise agreed or subject to clause 7.
Where the Goods are transported by the Supplier to
the Customer’s premises, delivery shall be deemed
to take place at the moment that the Goods pass
over the side of the vehicle in which they were
transported to the Customer’s premises. The
Customer shall provide or cause to be provided
full and clear access for delivery and will at its
own expense provide all necessary assistance
in unloading the Goods at the nominated place
of delivery. Where the Customer has requested
special delivery arrangements (i.e. other than Seller
delivering to the premises of Customer) risk in
respect of Goods shall pass to the Customer upon
the Goods leaving the premises of the Seller. The
Seller will not in any circumstances accept liability
for damage, shortage or loss during transit.
11. Ownership passes to
Customer on payment
Specifications subject to change without notice. E&OE. ©
Goods remain the property of the Seller until
payment is made in full plus any associated
charges. Where payment is tendered by cheque,
payment shall not be deemed to have been received
until such cheque is honoured upon presentation
at the drawer’s Bank. If the cheque is dishonoured
the Seller reserves the right to charge the Customer
for accounting and bank charges and other fees
incurred by it in respect of such dishonor. Upon
any default by the Customer in payment of any
amount due to the Seller, the Customer irrevocably
authorizes the Seller by its servants or agents to
enter any premises or vehicle owned, leased or
otherwise occupied by the Customer, or by any
of the Customer’s agents or associates for the
purposes of taking possession of the Goods if the
Seller has reasonable grounds to expect that the
Seller may find any part of the Goods there and the
Customer authorizes the Seller by its servants or
agents to use all reasonable force to obtain such
possession. That applies even if the Seller holds
some negotiated instrument or security for the
amount unpaid. If the Customer resells any of the
Goods before becoming the owner, the Customer
is acting as the Seller’s selling agent although
only to the absolute minimum extent necessary to
protect the Sellers ownership. Until title in Goods
has passed to the Customer, the Customer must
(a) hold all such Goods as bailee of the Seller (b)
store the Goods so as to show clearly that they
are the property of the Seller and keep the Goods
fully insured at the Customer’s expense and hold
the proceeds of any insurance claim in respect of
the Goods (to the fullest extent of the Customers
debts to the Seller) in trust for the Seller, and (c)
in the event that any of the Goods are sold by the
Customer (even if mixed with other goods), act
as the agent of the Seller and hold the proceeds
of sale on the Seller’s behalf and pay them to the
Seller on its request.
or a copy of any Verification Statement
confirming registration of a Financing
Statement or a Financing Change Statement
relating to a Security Interest granted by the
Customer, as Grantor, to the Seller.
(b) agrees to indemnify the Seller on demand
for all costs and expenses, including legal
costs and expenses on a solicitor/client
basis, associated with the:
(i) registration or amendment or discharge
of any Financing Statement registered
by or on behalf of the Seller, and
(ii) enforcement or attempted enforcement
of any Security Interest granted to the
Seller by the Customer.
(c) agrees that nothing in sections 130 to 143
of the PPSA will apply to these Terms or the
Security under these Terms;
(d) agrees to waive its right to do any of the
following under the PPSA:
(i) receive notice of removal of an
Accession under section 95;
(ii) receive notice of an intention to seize
Collateral under section 123;
(iii) object to the purchase of the Collateral
by the Secured Party under section 129;
(iv)receive notes of disposal of Collateral
under section 130;
(v) receive a Statement of Account if there
is no disposal under section 130(4);
(vi) receive a Statement of Account under
section 132(3)(d) following a disposal
showing the amounts paid to other
Secured Parties and whether Security
Interests held by other Secured Parties
have been discharged.
12. Personal Properties and Securities
Act 2009 (Cth) (“PPSA”)
(vii) receive notice of retention of Collateral
under section 135;
12.1 Defined terms in this clause have
the same meaning as given to them in
the PPSA.
(viii) redeem the Collateral under section
142; and
12.2 The Seller and the Customer acknowledge
that these Terms and Conditions constitute
a Security Agreement and gives rise to a
Purchase Money Security Interest (PMSI) in
favour of the Seller over the Goods supplied
or to be supplied to the Grantor pursuant to
theses Terms and Conditions.
12.3 The Goods supplied or to be supplied under
these Terms and Conditions fall within the
PPSA classification of “Other Goods” acquired
by the Customer pursuant to these Terms.
12.4 The Seller and the Customer acknowledge
that the Seller, as Secured Party, is entitled
to register its interest in the Goods supplied
or to be supplied to the Customer, as Grantor,
under these Terms and Conditions on the PPSA
Register as Collateral.
12.5 To the extent permissible at law, the Customer:
(a) waives Its right to receive notification of
(ix) reinstate the Security Agreement under
section 143.
13. Returns
To the extent permissible by law:
(a) returns must be first authorised by the
Seller and a Goods Return Authority (GRA)
No. obtained.
(o) returns for credit can only be made within 7
days of purchase.
To obtain a Goods Returned No. the date of purchase
and the original Invoice No. must be quoted. Goods
are to be returned freight prepaid and are to include
the Goods Returned No. and a copy of the original
invoice. Returns are subject to a 20% restocking fee
and will only be accepted if the Goods and packaging
are received in an unused and original condition.
Return of incorrectly supplied goods at the Seller’s
expense will be by the carrier of the Seller’s choice.
The Seller will not accept freight charges for goods
returned by other means.
3
14. Insurance
It is the Customer’s responsibility to effect whatever
insurance cover he requires at his own expense.
15. Indemnity
The Customer shall fully indemnify and keep
indemnified, the Seller, in respect of any and
all losses, damages, awards, claims, costs
(including legal costs on a full indemnity basis and
administration costs), expenses, proceedings,
actions and any other losses and/or liabilities
howsoever incurred to the extent that they result
from a breach by the Customer of its obligations
under any contract (including these Terms and
Conditions) or of its duty of care or from an act or
acts of negligence or wilful misconduct on the part
of the Customer.
16. Outstanding Interference
The Supplier shall not be liable to the Customer
for any defect, loss, damage, or delay whatsoever,
caused by strikes, lockouts, damage to or
breakdowns of plant, Government Interference,
earthquake, civil commotion, Force Majeure or any
cause beyond the control of the Supplier.
17.
Sellers Warranty
freight charges.
(f) The Customers rights under this express
warranty are limited to repair or the
provision of a replacement and that is the
Customers’ sole remedy.
(g) Any costs incurred by the Customer
in substituting the defective product
(including investigation and location of the
defective product and costs of any kind
incurred in carrying out the substitution),
are to be borne by the Customer.
(h) The benefi ts given to Customer by the
warranty set out in clause 17 are in
addition to other rights and remedies
available to the Customer under law in
relation to the goods or services to which
the warranty relates.
18. Limitation of Liability
(a) The Seller’s liability in respect of a breach
of a consumer guarantee for any Service
or Goods not of a kind ordinarily acquired
for personal, domestic or household use is
limited to, to the extent permissible by law
and at the Seller’s option;
(i) in relation to the Goods:
(A) the replacement of the products or the
supply of equivalent products;
(C) the payment of the cost of replacing
the products or of acquiring equivalent
products; or
(b) The goods come with guarantees that
cannot be excluded under the Australian
Consumer Law. You are entitled to a
replacement or refund for a major failure
and for compensation for any other
reasonably foreseeable loss or damage.
You are also entitled to have the goods
repaired or replaced it the goods fail to be
of acceptable quality and the failure does
not amount to a major failure.
(D) the payment of the cost of having the
products repaired.
(d) The Seller will only recognize a claim
under this warranty if the Customer gives
due notice to the Seller in writing within
12 months after supply by the Seller of
that item. The Seller’s contact details are
as stated on the front of these Terms and
Conditions. The notice must state the
warranty under which the Customer is
claiming and what has happened that put
the Seller in breach of the warranty. All
warranty claims must be supported by a
proof of purchase.
(e) The Customer is responsible for all costs
associated with the Customer making a
claim under this warranty including any
The Seller will use its reasonable endeavours to
obtain for the Customer the benefit of any warranty
from the manufacturer of any goods that the Seller
supplies to the Customer. This provision does not
require the Seller to commence legal proceedings or
incur legal costs.
23. Personal Information and
Privacy arrangements
19. Variation by Customer
Should there be any variation in details, sizes and
quantity, delivery instruction or any other item or
matter on which the quotation or invoice is based,
Seller reserves the right to revise and amend the
contract price accordingly.
20. Unexpected delay
This clause applies If something happens which is
beyond the Seller’s reasonable control that makes
it impossible, more difficult or more expensive for
the Seller to perform its obligations in its usual way.
In those cases the Seller may wait until it is again
possible for it to perform its obligations in the Seller’s
usual way without additional difficulty or expense
and the Seller is not liable for any delay which results.
Without limiting those general words, that applies
where the Seller has problems due to accidents,
strikes, transport difficulties, default or delay by any
supplier to the Seller or stock shortages.
(B) the repair of the products;
(a) The words ‘goods’ in the following
statement refer to the Goods and ‘You’
means the Customer.
(c) The Seller warrants to repair, or at its
option, make a replacement available to
the Customer for any new item supplied
by the Seller If there is any material
manufacturing defect in materials or
workmanship.
22. Manufacturer
operating costs, wasted or increased financing
costs, loss of or damage to data or records, loss
of or unavailability of or damage to tangible or
intangible property, claims made against the
Customer by others, losses or costs or expenses
associated with identification, investigation,
assessment, repair, replacement or servicing and
any other economic loss or damage and any other
special, indirect or consequential loss or damage.
(i) in relation to the Services:
(A) the supply of the Services again; or
(B) the payment of the cost of having the
Services supplied again.
(b) To the extent permitted by law, all other
warranties whether implied or otherwise,
not set out in these Terms and Conditions
are excluded and the Seller is riot liable in
contract, tort (including, without limitation,
negligence or breach of statutory duty) or
otherwise to compensate the Customer for:
(i) any increased costs or expenses;
(ii) any loss of profit, revenue, business,
contracts or anticipated savings;
(iii)any loss or expense resulting from a
claim by a third party; or
(iv)any special, indirect or consequential
loss or damage of any nature
whatsoever caused by the Seller’s
failure to complete or delay in
completing the order to deliver
the Goods.
Consequential Damage in these Terms and
Conditions includes loss of use, lost production,
lost income or profi ts, loss of opportunity, lost
savings, increased or wasted expenses, delay or
lost time, loss of or damage to goodwill, increased
21. No other representations
The Seller relies on the following warranties from the
Customer as essential conditions.
Where the consumer guarantees do not apply to a
sale of Goods between the Customer and the Seller
and to the extent permissible by law, the Customer
acknowledges that:
(a) it has not relied on any representation
made or implied by the Seller or arising out
of or implied by its conduct, nor upon any
description, illustration or specification
contained in any document produced by the
Seller, including any catalogue or publicity
material, unless made In writing for the
purposes of this transaction and signed by
one of the Sellers proprietors or directors.
The Seller may collect personal information in
connection with its dealings with the Customer. The
Seller may send the Customer information unless the
Customer notifies the Seller that it does not want to
be on a distribution list. The Customer acknowledges
and consents to the Seller collecting, disclosing and
using personal information in the manner and for
the purposes of enabling the Seller to better provide
and market its facilities, products and services to the
Customer, and to otherwise fulfil its legal obligations.
24. Clerical Errors
Clerical errors in computation, typing or otherwise
of price lists, catalogues, quotations, acceptances,
offers, invoices, delivery dockets, credit notes or
specifications of Seller shall be subject to correction.
The Seller may complete any blanks on any relevant
document, on the Customer’s behalf.
25. Modifications
All modifications and amendments to these Terms
and Conditions shall be in writing and if otherwise
shall not be binding upon the Seller. If any of the
provisions of the Contract are unlawful or invalid
by reason of any applicable statute or rule of Law,
then such provision shall be severed from the rest
of this Contract which shall remain valid and binding
on the parties
26. Government Laws
The law governing these Terms and Conditions
shall be the law of NSW and the Customer submits
to the non-exclusive jurisdiction of the Courts
operating in NSW.
(b) to the extent that the Seller may have made
or implied, or, by conduct , given rise to
or implied, any representation that is not
expressly stated in these conditions, the
Customer is not proceeding in reliance on
the representation because the Customer
has had and taken the opportunity to
independently check and form its own view
about the significance, and the accuracy or
otherwise, of the representation.
(c) without limitation, it is not relying on being
able to make any claim against the Seller,
for any representation made or conduct
occurring before, under or in connection
with any order, beyond the claims that
can be made, and the limits applying, as
provided in these Terms and Conditions.
Specifications subject to change without notice. E&OE. ©
TERMS AND CONDITIONS OF TRADE
To the extent permissible by law, Goods specially
purchased, manufactured, machined or cut to size to
the Customer’s specifications are not returnable.
U-3
4
U-4
Specifications subject to change without notice. E&OE. ©
SECTION V
5
PART
NUMBER
INDEX
•
This section contains the product codes of all the tools and
machines featured in this catalogue, listed in alpha-numeric
order and referenced to the page numbers on which they occur.
PART NUMBER INDEX
PART NUMBER INDEX
2
V-2
CODE
110.1
111.1
114.12
120.2
121.2
122.21
123.21
124.22
125.23
130.3
131.3
132.31
133.31
134.32
135.33
137.32
137.34
137.3498
137.35
137.3598
137.36
137.3698
140.4
141.31
144.42
150.5
150.925
151.51
151.5105
151.52
151.525
153.52
153.525
153.53
153.5305
153.605
153.607
153.6075
153.617
153.6175
157.55
159.505
159.591
159.5925
159.6
159.6
194.0205
194.0405
194.122
196.2003
196.2103
196.2203
196.2213
196.225
196.2255
196.3003
196.3103
196.3203
196.5095
196.51
196.5105
196.515
303.1005
303.103
303.1035
303.1035
303.106
303.106
303.11
303.111
320.002
320.2
320.2004
320.2006
320.2012
320.3658
320.3658
320.3658
PAGE
I-27
I-24
I-21
I-27
I-24
I-27
I-24
I-21
I-22
I-27
I-25
I-27
I-25
I-22
I-22
I-31
I-31
I-31
I-31
I-31
I-31
I-31
I-28
I-25
I-22
I-20
I-20
I-29
I-29
I-18
I-18
I-18
I-18
I-29
I-29
I-19
I-19
I-19
I-29
I-29
I-34
I-37
I-35
I-35
I-20
I-37
I-8
I-8
I-8
I-24
I-24
I-22
I-21
I-28
I-28
I-25
I-28
I-22
I-29
I-18
I-29
I-18
I-40
I-40
I-40
I-41
I-40
I-41
I-40
I-40
I-14
I-11
I-11
I-12
I-12
I-5
I-14
I-15
CODE
320.414
320.414
320.512
320.512
320.55
320.55
320.56
320.56
320.565
320.565
320.961
320.962
325.001
325.2
325.2006
340.16
340.163
340.166
340.167
340.55
340.581
350.5502
350.5505
350.5507
350.5509
350.5519
350.5525
350.9135
350.9142
365.551
365.5515
365.552
365.553
365.554
365.556
365.5602
365.5604
365.5608
365.5618
365.5635
365.571
365.572
365.573
365.574
418.2199
418.3039
426.5051
426.5351
426.5351
426.5352
426.5352
426.5353
426.5355
426.5356
426.5358
426.5359
426.536
426.5369
426.539
431.3504
431.3508
431.3512
431.3904
431.3908
431.3912
437.011
437.012
437.51
437.53
438.0205
438.0209
438.0405
438.0409
439.3504
439.3508
439.3512
439.3522
439.3524
Specifications subject to change without notice. E&OE. ©
PAGE
I-14
I-15
I-14
I-15
I-14
I-15
I-14
I-15
I-14
I-15
I-14
I-14
I-15
I-12
I-12
I-42
I-42
I-42
I-42
I-42
I-42
I-5
I-5
I-5
I-5
I-5
I-5
I-5
I-5
I-7
I-7
I-7
I-7
I-7
I-7
I-7
I-7
I-7
I-7
I-7
I-7
I-7
I-7
I-7
I-26
I-26
I-38
I-30
I-36
I-30
I-36
I-19
I-38
I-19
I-38
I-20
I-20
I-38
I-20
I-32
I-32
I-32
I-32
I-32
I-32
I-36
I-38
I-19
I-19
I-9
I-9
I-9
I-9
I-32
I-32
I-32
I-32
I-32
CODE
439.3528
450.5001
450.5003
450.5006
450.5007
450.5011
450.5013
450.5016
450.5017
606.5303
606.5303
612.012
612.0125
612.5301
612.532
612.5325
641.3512
704.1101
704.1103
704.1105
704.1106
704.1107
704.111
704.1112
704.2105
704.31011
704.3103
704.3105
704.3107
704.3111
704.3205
705.11
705.1101
705.1102
705.1106
705.1112
705.21
705.2102
705.906
705.908
705.91
708.11
708.1101
720.2003
720.3003
2698
3026
3383
3388
5550
6144
9109
9201
9202
9266
9311
9312
9313
9321
9322
9323
9339
9340
9362
9363
9364
9365
9366
9367
9368
9369
9370
9371
9405
9456
18290
49500
49502
PAGE
I-32
I-10
I-10
I-10
I-10
I-10
I-10
I-10
I-10
I-30
I-36
I-38
I-38
I-36
I-19
I-19
I-32
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-33
I-33
I-33
I-33
I-33
I-33
I-33
I-34
I-34
I-34
I-33
I-33
I-26
I-26
K-4
K-4
K-4
K-4
K-4
K-4
K-4
M-3
M-3
K-4
M-3
M-3
M-3
M-3
M-4
M-4
M-4
M-4
M-4
M-4
M-5
M-5
M-5
M-5
M-5
M-5
M-6
M-6
M-6
M-6
K-4
I-17
I-17
CODE
483944
484292
103201002
103201003
103201004
103201005
103201152
103201154
103201155
103201202
103201204
103201205
103205002
103205003
103205004
103205005
103205152
103205154
103205155
103205202
103205204
103205205
IAT-7524
136.3200S
136.3400S
136.3498C
136.3498S
136.3500S
136.3598C
136.3598S
136.3600S
136.3698C
136.3698S
137.2600C
137.3200C
137.3400C
137.3500C
17-816-998
18 025 003
18-999-225
194.C205
194.C405
303.0014A
303.1025/AS
303.1025/AS
303.1050/AS
303.1050/AS
303.1075/AS
303.1085/AS
303.1095/AS
303.1095/WD
303.10KA
303.10KA/DT
303.10KAV30/D
303.10KAV30/WD
303.1105/AS
303.1105/AS
312.MRPC
312.R200
312.S200
320.002G
320.002H
320.1010DM
320.1010DT
320.1020SB
320.1020SM
320.1020SS
320.1020ST
325.00CD
325.00DW
325.1010DB
325.1010DS
325.1010GT
325.1010SB
325.1010SS
325.1020ST
340.490/S
342.HY50
PAGE
I-17
I-17
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
C-18
I-31
I-31
I-31
I-31
I-31
I-31
I-31
I-31
I-31
I-31
I-31
I-31
I-31
I-31
Q-13
Q-14
Q-12
I-8
I-8
I-41
I-40
I-41
I-40
I-41
I-40
I-40
I-40
I-41
I-41
I-39
I-39
I-39
I-40
I-41
I-9
I-9
I-9
I-14
I-14
I-15
I-15
I-14
I-14
I-14
I-14
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-42
I-43
PART NUMBER INDEX
PAGE
I-3
I-3
I-3
I-4
I-4
I-4
I-5
I-5
I-5
I-5
I-7
I-7
I-7
I-7
I-7
I-7
I-7
E-5
E-7
E-3
E-3
E-5
E-8
E-3
E-6
E-9
E-18
E-20
E-7
E-6
E-15
E-15
E-7
L-25
L-25
L-25
E-11
E-6
E-11
E-9
Q-9
Q-9
Q-9
Q-9
Q-10
Q-10
Q-10
Q-9
Q-9
Q-9
Q-9
Q-9
Q-9
Q-10
Q-10
Q-10
Q-10
Q-10
E-20
E-18
E-5
E-18
E-5
E-4
E-19
E-19
E-10
Q-10
Q-10
E-10
E-11
Q-10
Q-10
E-4
E-20
E-20
E-15
E-18
CODE
520RA2XKTKW;8000;727
520RA2XKTKW;8000;7SP
520VXK;8000;727
54VK;8000;727
56HK;6000;601
56HK;9000;401
56PCK;6000;841
56SK;6000;9SP
64VK;6000;927
65HK;4000;801
65HK;6000;601
662VBG;3300;9
662VBW;14
66PCK;4000;1441
66PCK;5000;1241
66VBG;6000;9
74316-50
74504-50
74504-52
74507-50
A72005
A72006
A72007
A72008
A72009
A7201
A72010
A72011
A72012
A72014
A72016
A72018
A72104
A72108
A72112
A72803
A72803
A73008
A73010
A73012
A73014
A73016
A73018
A73020
A73022
A73024
A73026
A73028
A73106
A73112
A73116
A73117
A73120
A73208
A73208
A73216
A73216
A73700
A74010
A74012
A74014
A74016
A74018
A74020
A74022
A74024
A74026
A74028
A74030
A74032
A74034
A74036
A74038
A74040
A74106
A74112
A74116
A74117
PAGE
E-15
E-18
E-14
E-14
E-12
E-11
E-17
E-19
E-14
E-12
E-12
E-13
E-19
E-17
E-17
E-13
Q-10
Q-13
Q-13
Q-13
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-9
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-9
L-9
L-9
L-9
L-9
L-8
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
CODE
A74118
A74120
A74208
A74208
A74216
A74216
A74700
A74707
A75022
A75024
A75026
A75028
A75030
A75032
A75034
A75036
A75038
A75040
A75042
A75044
A75046
A75048
A75050
A75052
A75054
A75056
A75058
A75060
A75062
A75064
A75104
A75107
A75110
A75113
A75116
A75117
A75208
A75208
A75216
A75216
A75700
A76024
A76026
A76028
A76030
A76032
A76034
A76036
A76038
A76040
A76042
A76044
A76046
A76048
A76050
A76052
A76054
A76056
A76058
A76060
A76062
A76064
A76066
A76068
A76070
A76072
A76074
A76076
A76078
A76080
A76082
A76084
A76086
A76088
A76090
A76092
A76094
A76096
PAGE
L-9
L-9
L-9
L-9
L-9
L-10
L-9
L-9
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-9
L-10
L-10
L-12
L-10
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
CODE
A76098
A76100
A76104
A76105
A76107
A76108
A76110
A76112
A76113
A76116
A76118
A76119
A76120
A76208
A76208
A76216
A76216
A76324
A76328
A76332
A76336
A76340
A76700
A77030
A77032
A77033
A77035
A77036
A77038
A77041
A770445
A77046
A770476
A77050
A770508
A77052
A77054
A77055
A770556
A7705715
A77058
A77060
A7706032
A770635
A77065
A770667
A77070
A77075
A770762
A77080
A770825
A77085
A77090
A77095
A77100
A771016
A77105
A77106
A77110
A77112
A77115
A77116
A77117
A77120
A77122
A77125
A77130
A77135
A77140
A77145
A77150
A77208
A77208
A77216
A77216
A77700
A78041
A780445
PAGE
L-11
L-11
L-11
L-12
L-12
L-11
L-12
L-11
L-12
L-11
L-12
L-12
L-11
L-10
L-12
L-12
L-12
L-11
L-11
L-11
L-11
L-11
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-12
L-13
L-12
L-13
L-13
Specifications subject to change without notice. E&OE. ©
3
PART NUMBER INDEX
CODE
345.2000D
345.2004D
345.2006D
350.2000B
350.2004D
350.2006D
350.5610R
350.5610RA
350.5620R
350.5620RA
365.5495L
365.5495R
365.5501/2
365.5502/2
365.5503/2
365.5504/2
365.5506/2
4000DRA8MKSR;1200;1/2
4002AGHKS;20000;1/4
400D21MKSR;900;1/2
400D8MKSR;2500;3/8
400DRA5MKSR;2000;3/8
400EHKSRD+13;20000;1/4
400FD8MK; 2500; 3/8
400GEKSR;20000;1/4
400GH1KSR;20000;3/8-24
400GH3MKSRT5/8;5500
400GH8MKSRS1;2500
400GHDKSR;20000;1/4
400HGEKSR;20000;1/4
400RA4KSR;10000;427
400RAE2KSR;10000;527
400SHKSR;20000;1/4
406EM
406ES
406ET
407GH4KSR;15000;401
40AGKS;22000;1/4
40GHK;301
410RAEDKSR;13000;1/4
4214-51
4214-52
4215-08
4215-09
4216-52
4224-50
4248-89
4314-51
4314-52
4315-09
4315-10
4315-11
4315-12
4316-06
4324-50
4324-51
4348-89
4424-50
4520RA3MKSR;2000
4620RA3MKSR;4000;7SP
500D2M;1000;1/2
500H1MKT5/8;4000
507D2M;500;3/4
507FD1MK;1750;1/2
510VK;4000; 7SP
510WG
511HKS;18000;5/8-11
5191-88
5191-88
5201HKCW;12000;1/2-13
5201HKS;9000;401
5203-06
5203-06
520FD1MK;1500;3/4
520H1MKS1;3000
520H2MKS1;750
520RA2XKTKW;6000;927
520RA2XKTKW;6000;9SP
V-3
PART NUMBER INDEX
PART NUMBER INDEX
4
V-4
CODE
A78046
A780476
A78050
A780508
A78052
A78054
A78055
A78058
A78060
A780635
A78065
A78070
A78075
A78080
A780825
A78085
A78090
A78095
A78100
A781016
A78105
A78106
A78110
A78112
A78115
A78117
A78120
A78122
A78125
A78130
A78135
A78140
A78145
A78150
A78155
A78160
A78165
A78170
A78175
A78180
A78185
A78190
A78200
A78208
A78208
A78210
A78215
A78225
A78235
A78700
A82004
A82005
A82006
A82007
A82008
A82009
A82010
A82011
A82012
A82013
A82014
A82015
A82045
A82055
A83006
A83007
A83008
A83009
A83010
A83011
A83012
A83013
A83014
A83015
A83016
A83017
A83018
A83019
PAGE
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-13
L-12
L-13
L-13
L-13
L-13
L-13
L-13
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
L-8
CODE
A83020
A83021
A83022
A84008
A84009
A84010
A84011
A84012
A84013
A84014
A84015
A84016
A84017
A84018
A84019
A84020
A84021
A84022
A84023
A84024
A84025
A84026
A84027
A84028
A84029
A84030
A84031
A84032
A85017
A85018
A85019
A85020
A85021
A85022
A85023
A85024
A85025
A85026
A85027
A85028
A85029
A85030
A85031
A85032
A85033
A85034
A85035
A85036
A85037
A85038
A85040
A85041
A85042
A85046
A85050
A85054
A85055
A85058
A85060
A860100
A860105
A860110
A860115
A86019
A86020
A86021
A86022
A86023
A86024
A86025
A86026
A86027
A86028
A86029
A86030
A86031
A86032
A86033
Specifications subject to change without notice. E&OE. ©
PAGE
L-8
L-8
L-8
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-9
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-10
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
CODE
A86034
A86035
A86036
A86037
A86038
A86039
A86040
A86041
A86042
A86043
A86044
A86046
A86048
A86050
A86052
A86054
A86055
A86058
A86060
A86063
A86065
A86067
A86070
A86071
A86075
A86076
A86077
A86080
A86085
A86090
A86095
AA-100
AA-10330040
AA-10330060
AA-10330080
AA-10330120
AA-136A-5V
AA-136A-7V
AA-20520040
AA-20520060
AA-20520080
AA-20520120
AA-205DK
AA-2107A060
AA-2107A080
AA-2107A120
AA-2107A150
AA-2107A240
AA-2107A400
AA-2107A600
AA-30540040
AA-30540060
AA-30540080
AA-30540120
AA-305DK
AA-3102040
AA-3102060
AA-3102080
AA-3102120
AA-3102240
AA-3200AS040
AA-3200AS060
AA-3200AS080
AA-3200AS150
AA-3200AS240
AA-330-19
AA-330-24
AA-330-25
AA-330-26
AA-340-57
AA-400-8
AA-5000
AA-5001
AA-5007
AA-5009
AA-5011
AA-5012
AA-506P-56R
PAGE
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-11
L-20
L-3
L-3
L-3
L-3
L-23
L-23
L-3
L-3
L-3
L-3
L-5
L-4
L-4
L-4
L-4
L-4
L-4
L-4
L-3
L-3
L-3
L-3
L-5
L-4
L-4
L-4
L-4
L-4
L-4
L-4
L-4
L-4
L-4
L-20
L-20
L-20
L-20
L-6
L-14
L-15
L-14
L-20
L-21
L-21
L-21
L-20
CODE
AA-506P-56S
AA-506P-56T
AA-5922
AA-5923
AA-60726
AA-60796
AA-60797
AA-60798
AA-760908
AA-801
AA-802
AA-803
AA-803J
AA-804
AA-805
AA-806
AA-807
AA-808
AA-809
AA-810
AA-811
AA-812
AA-813
AA-814
AA-815
AA-816
AA-817
AA-818
AA-819
AA-820
AA-821
AA-822
AA-823
AA-824
AA-825
AA-C1330-36
AA-EM4
AA-HLS75110040
AA-HLS75110060
AA-HLS75110080
AA-HLS75110120
AA-HLS75110180
AA-HLS75110240
AA-HLS75110320
AA-KL1238
AA-KL3838
AA-KP1238M
AA-KP1438M
AA-KP3838M
AA-P7712-A1
AA-P7712-A2
AA-P7712-A3
AA-P7712-A4
AA-PC-1
AA-QMD50024
AA-QMD50040
AA-QMD50060
AA-QMD50080
AA-QMD50120
AA-QMD75040
AA-QMD75060
AA-QMD75080
AA-QMD75120
AA-RC1238
AA-RC3838H
AA-RC3838L
AA-RS1
AA-RS2
AA-RS3
AA-SCD50BLF
AA-SCD50BRC
AA-SCD50MAM
AA-SCD75BLF
AA-SCD75BRC
AA-SCD75MAM
ABV-108
ABV-110
ABV-115
PAGE
L-20
L-20
L-21
L-21
L-22
L-22
L-22
L-22
L-6
L-16
L-16
L-16
L-16
L-16
L-17
L-17
L-17
L-17
L-17
L-17
L-17
L-17
L-17
L-18
L-18
L-18
L-18
L-18
L-18
L-18
L-18
L-18
L-19
L-19
L-19
L-6
L-21
L-4
L-4
L-4
L-4
L-4
L-4
L-4
L-19
L-19
L-20
L-20
L-20
L-7
L-7
L-7
L-7
L-19
L-3
L-3
L-3
L-3
L-3
L-4
L-4
L-4
L-4
L-19
L-19
L-19
L-6
L-6
L-6
L-5
L-5
L-5
L-5
L-5
L-5
P-14
P-14
P-14
PART NUMBER INDEX
PAGE
P-14
P-14
L-25
L-25
O-20
O-20
O-20
O-20
O-20
O-20
P-7
P-7
P-7
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
A-3
A-3
A-3
A-3
P-5
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-3
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
CODE
AH2SH6
AH2SH8
AH2SM4
AH2SM8
AH37012
AH37018
AH37024
AH37030
AH37036
AH37048
AH37060
AH37072
AH37096
AH37100
AH37100
AH37135
AH37138
AH37141
AH37145
AH37235
AH37238
AH37241
AH37245
AH37335
AH37338
AH37341
AH37345
AH55120
AH55148
AH55150
AH55248
AH55348
AH55350
AJ2PF4
AJ2PF6
AJ2PH4
AJ2PH5
AJ2PH6
AJ2PH8
AJ2PM4
AJ2PM6
AJ2SF4
AJ2SF6
AJ2SF8
AJ2SH4
AJ2SH5
AJ2SH6
AJ2SH8
AJ2SM4
AJ2SM6
AJ2SM8
AL-1000
AL-1008
AL-1010
AL-1015
AL-1015R
AL-1018
AL-1020
AL-1070
AL-1200
AL-1202
AL-1203
AL-1204
AL-1205
AL-1206
AL-1207
AL-1208
AL-1213
AL-1214
AL-1215
AL-1215R
AL-1300
AL-1310
AL-1310K
AL-1312
AL-1312K
AL-1320
AL-1320K
PAGE
P-8
P-8
P-8
P-8
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
K-16
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
Q-3
A-26
Q-3
A-26
P-5
A-26
A-26
A-26
A-4
A-4
A-4
A-4
A-5
A-5
A-5
A-5
A-27
A-25
A-25
P-5
A-8
A-9
A-9
A-9
A-9
A-9
A-9
CODE
AL-1321
AL-1322
AL-1322K
AL-1330
AL-1331
Al-1335
AL-1336
AL-1340
AL-1341
AL-1344
AL-1345
AL-1347
AL-1349
AL-1355
AL-1359
AL-1500
AL-1501
AL-1502
AL-1503
AL-1504
AL-1505
AL-1506
AL-1510
AL-1512
AL-1513
AL-1513K
AL-1550
AL-1551
AL-1552
AL-1553
AL-1553K
AL-1554
AL-1554K
AL-1555
AL-1555K
AL-1556
AL-1580W
AL-1620
AL-1781
AL-1782
AL-1953
AL-1960
AL-2000
AL-20020CF
AL-2010
AL-2251
AL-2314
AL-2315
AL-2316
AL-2320
AL-2321
AL-2330
AL-2331
AL-2340T
AL-2345T
AL-2350
AL-2359
AL-2359-2
AL-2423
AL-2423-6
AL-2450
AL-2460
AL-2480
AL-25020CF
AL-3019
AL-3101
AL-3102
AL-3254
AL-3400
AL-3403
AL-3404
AL-3405
AL-40216RM
AL-40216RM
AL-4200
AL-4202K
AL-4203
AL-4800
PAGE
A-10
A-10
A-10
A-6
A-6
A-6
A-19
A-13
A-14
A-7
A-7
A-7
A-7
A-8
A-8
A-19
A-20
A-20
A-20
A-20
A-20
A-21
A-20
A-21
A-22
A-22
A-19
A-19
A-18
A-18
A-18
A-19
A-19
A-15
A-15
A-14
A-21
A-28
A-24
A-24
A-25
A-13
Q-4
P-4
Q-4
A-11
A-16
A-16
A-15
A-17
A-17
A-16
A-16
A-16
A-16
A-11
A-11
A-12
A-12
A-12
A-10
A-10
A-6
P-4
A-21
A-17
A-17
A-4
A-28
A-28
A-28
A-28
Q-14
Q-14
A-11
A-11
A-24
A-14
CODE
AL-5010
AL-5020
AL-6000
AL-634
AL-63416BM
AL-63416BM
AM 1001
AM221
AN-6000
AN09012
AN09013
AN09014
AN09015
AN09016
AN09017
AN09018
AN09019
AN09020
AN15014
AN15018
AN15024
AN15114
AN15118
AN15124
AN15214
AN15218
AN15224
AN15314
AN15318
AN15411
AN15505
AN15612
AN15717
AN15809
AN15906
AN15907
AN15908
AN17014
AN17018
AN17024
AN17036
AN17048
AN17060
AN17114
AN17118
AN17124
AN17136
AN17148
AN17160
AN17214
AN17218
AN17224
AN17236
AN17248
AN17260
AN17314
AN17318
AN17414
AN17418
AN17511
AN17512
AN17605
AN17612
AN17617
AN17718
AN17812
AN17906
AN17906
AN17907
AN17907
AN17908
AN17908
AN17909
AN18002
AN18003
AN18105
AN18106
AN18107
PAGE
A-18
A-18
A-13
P-16
Q-14
Q-14
K-14
R-14
G-4
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-15
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-8
K-7
K-8
K-7
K-8
K-7
K-7
K-7
K-7
K-7
K-7
Specifications subject to change without notice. E&OE. ©
5
PART NUMBER INDEX
CODE
ABV-120
ABV-125
ACO-1000
ACO-5000
ACT03100
ACT04000
ACT05500
ACT08100
ACT10500
ACT14500
ADR12100
ADR12200
ADR19100
AE15012
AE15018
AE15024
AE15030
AE15036
AE15048
AE15060
AE15072
AE15124
AE15125
AE15129
AE15132
AG-4
AG-4L
AG-5M
AG-6
AH-1015R
AH10010
AH10010CF
AH10010HF
AH10010JF
AH10010NF
AH10010RF
AH10020
AH10020CF
AH10020HF
AH10020JF
AH10020NF
AH10020RF
AH10030
AH10030CF
AH10030HF
AH10030JF
AH10030NF
AH10030RF
AH10100
AH10100CF
AH10100HF
AH10100JF
AH10100NF
AH10100RF
AH12020
AH12020CF
AH12020HF
AH12020JF
AH12020NF
AH12020RF
AH12100
AH12100CF
AH12100HF
AH12100JF
AH12100NF
AH12100RF
AH20020
AH25020
AH2PF4
AH2PH4
AH2PH5
AH2PH6
AH2PH8
AH2PM4
AH2PM6
AH2SF4
AH2SH4
AH2SH5
V-5
PART NUMBER INDEX
PART NUMBER INDEX
6
V-6
CODE
AN18108
AN18110
AN18112
AN18205
AN18206
AN18207
AN18208
AN18301
AN18302
AN18303
AN18304
AN18306
AN18400
AN18501
AN2000
AN33010
AN33012
AN33018
AN33110
AN33112
AN33118
AN33210
AN33212
AN33218
AN33310
AN33313
AN33319
AN33322
AN3346F
AN3348H
AN3366F
AN3366H
AN3368F
AN3386F
AN3386H
AN40072
AN40096
AN40172
AN40196
AN40272
AN40296
AN52008
AN52011
AN52109
AN52112
AN52118
AN52124
AN52136
AN52148
AN52209
AN52212
AN52218
AN52224
AN52236
AN52248
AN52309
AN52312
AN52318
AN52409
AN52412
AN52418
AN52509
AN52512
AN52518
AN52609
AN52610
AN52710
AN52800
AN52811
AN52911
AN60014
AN60018
AN60024
AN60036
AN60048
AN60060
AN60072
AN60096
PAGE
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
K-7
G-3
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-13
K-7
K-7
K-7
K-7
K-7
K-7
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
CODE
AN60114
AN60118
AN60124
AN60136
AN60148
AN60160
AN60172
AN60196
AN60214
AN60218
AN60224
AN60236
AN60248
AN60260
AN60272
AN60296
AN60314
AN60318
AN60414
AN60418
AN60511
AN60512
AN60605
AN60606
AN60608
AN60609
AN60618
AN60711
AN60715
AN60812
AN60816
AN60903
AN60913
AN61004
AN61014
AN61109
AN61116
AN61119
AN61122
AN61125
AN61132
AN61138
AN61144
AN61150
AN61164
AN61216
AN61219
AN61222
AN61225
AN61300
AN61302
AN61303
AN61304
AN61305
AN61400
AN61501
AN61502
AP-140A
AP-160A
AP-190A
AP1PF4
AP1PH5
AP1PH6
AP1PH8
AP1PM4
AP1PM6
AP1PM8
AP1SH5
AP1SH6
AP1SH8
AP1SM4
AP1SM6
AP1SM8
AP1TSP
APT-109
APT-1133
APT-1133ST
APT-1133TH
Specifications subject to change without notice. E&OE. ©
PAGE
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-8
K-9
K-9
K-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
P-10
K-14
K-12
K-13
K-13
CODE
APT-115
APT-117
APT-118
APT-119
APT-125
APT-131
APT-133
APT-133FB
APT-133ST
APT-133TH
APT-137
APT-140
APT-155
APT-160
APT-190
APT-452H
APT-453H
APT-454H
APT-652H
APT-653H
APT-654H
APT021125
APT021225
APT021250
APT021325
APT021350
APT021425
APT021450
APT021525
APT021550
APT021625
APT021650
APT021725
APT021750
APT021825
APT021850
APT021925
APT021950
APT022025
APT022050
APT022125
APT022150
APT022225
APT022250
APT022325
APT022350
APT022425
APT022450
APT022525
APT022550
APT022625
APT022650
APT022725
APT022750
APT022825
APT022850
APT022925
APT022950
APT023025
APT023050
APT023125
APT023150
APT023225
APT023250
APT023325
APT023350
APT023425
APT023450
APT023525
APT023560
APT023625
APT023650
APT023725
APT023750
APT023825
APT023850
APT023925
APT023950
PAGE
K-15
K-7
K-5
K-17
K-5
K-17
K-11
K-12
K-12
K-12
K-15
K-7
K-16
K-7
K-7
K-4
K-4
K-4
K-3
K-3
K-3
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
CODE
APT024025
APT024050
APT024125
APT024150
APT024225
APT024250
APT024325
APT024350
APT024425
APT024450
APT024525
APT024550
APT024625
APT024650
APT024725
APT024750
APT024825
APT024850
APT024925
APT024950
APT025025
APT025050
APT025125
APT025150
APT025225
APT025250
APT025350
APT025450
APT025550
APT025650
APT025750
APT025850
APT025950
APT026050
APT026150
APT026250
APT026350
APT026450
APT026550
APT21050
APT31050
APT31075
APT31100
APT33050
APT33075
APT33100
APT41050
APT41075
APT421325
APT421350
APT421425
APT421450
APT421525
APT421550
APT421625
APT421650
APT421725
APT421750
APT421825
APT421850
APT421925
APT421950
APT422025
APT422050
APT422125
APT422150
APT422225
APT422250
APT422325
APT422350
APT422425
APT422450
APT422525
APT422550
APT422625
APT422650
APT422725
APT422750
PAGE
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-7
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
PART NUMBER INDEX
PAGE
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-8
H-13
H-13
H-13
H-13
H-13
H-14
H-14
H-12
H-12
H-12
H-13
H-13
H-13
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
CODE
APTCT3335
APTCT34110
APTCT3435
APTCT35110
APTCT3535
APTCT36110
APTCT3635
APTCT37110
APTCT3735
APTCT38110
APTCT3835
APTCT39110
APTCT3935
APTCT40110
APTCT4035
APTCT41110
APTCT4135
APTCT42110
APTCT4235
APTCT43110
APTCT4335
APTCT44110
APTCT4435
APTCT45110
APTCT4535
APTCT46110
APTCT4635
APTCT47110
APTCT4735
APTCT48110
APTCT4835
APTCT49110
APTCT4935
APTCT50110
APTCT5035
APTCT51110
APTCT5135
APTCT52110
APTCT5235
APTCT53110
APTCT54110
APTCT55110
APTCT56110
APTCT57110
APTCT58110
APTCT59110
APTCT60110
APTCT61110
APTCT62110
APTCT63110
APTCT64110
APTCT65110
APTL001
APTL005
APTL205
APTM101060
APTM101080*
APTM101090
APTM1010A
APTM101100*
APTM101110
APTM101120*
APTM101130
APTM101140*
APTM101150
APTM101160*
APTM101170
APTM101180*
APTM101190
APTM101200
APTM10250
APTM10312
APTM10375
APTM10437
APTM10500
APTM10562
APTM10625
APTM10687
PAGE
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-9
H-14
H-14
H-14
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
CODE
APTM10750
APTM116
APTM117
APTM118
APTM120812
APTM120875
APTM120937
APTM121000
APTM121062
APTM121125
APTM121187
APTM121250
APTM121375
APTM121500
APTM12210
APTM12220
APTM12230
APTM12240
APTM12250
APTM3008
APTM3048
APTM3063
APTM327
APTM328
APTM329
APTM427
APTM464
APTMK01
APTMK02
APTMK03
APTMK04
APTP001
APTPC100
APTPC201
APTPT100
APTPT201
APTRA3013
APTRA3089
APTRA3092
APTRD025
APTRD040
APTRD050
APTRD050
APTRD060
APTRD070
APTRD075
APTRD080
APTRD090
APTRD100
APTRD100
APTRD110
APTRD120
APTRD150
APTRD200
APTRD250
APTRS1825
APTRS1925
APTRS2025
APTRS2125
APTRS2225
APTRS2325
APTRS2425
APTRS2525
APTRS2625
APTRS2725
APTRS2825
APTRS2925
APTRS3025
APTRS3125
APTRS3225
APTRS3325
APTRS3425
APTRS3525
APTRS3625
APTS0168
APTS1600
APTSRA25
APTSRA25
PAGE
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-14
H-12
H-12
H-12
H-12
H-7
H-9
H-9
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-13
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-10
H-14
H-14
H-7
H-8
CODE
APTSRA3057
APTSRA50
APTSRA50
APTSRA90
APTTD020425
APTTD020525
APTTD020625
APTTD020725
APTTD020825
APTTD020925
APTTD021025
APTTD021125
APTTD021225
APTTD420425
APTTD420525
APTTD420625
APTTD420725
APTTD420825
APTTD420925
APTTD421025
APTTD421125
APTTD421225
APTTD421325
APTTD421425
AR08200
AR10200
AR11200
AR12200
AR12267
AR16200
AR16300
AR16450
AR19200
AR19300
AR19450
AR1PF4
AR1PF6
AR1PH6
AR1PH6S
AR1PH8
AR1PM4
AR1PM6
AR1SF4
AR1SF6
AR1SH4
AR1SH5
AR1SH6
AR1SH8
AR1SM4
AR1SM6
AR1SM8
AR22200
AR22300
AR22450
AR25200
AR25300
AR25450
AR25600
AR28200
AR28300
AR28450
AR320-V
AR32200
AR32300
AR32450
AR35200
AR35300
AR35450
AR38200
AR38300
AR38450
AR515-V
ARS2A-M010
ARS2A-M060
ARS2A-M180
ARS2DA-M185
ARS3A-M240
ARSD3A-M240
PAGE
H-7
H-7
H-8
H-9
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
H-12
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
P-8
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
O-20
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
O-20
F-5
F-5
F-5
F-6
F-6
F-6
Specifications subject to change without notice. E&OE. ©
7
PART NUMBER INDEX
CODE
APT422825
APT422850
APT422925
APT422950
APT423025
APT423050
APT423125
APT423150
APT423225
APT423250
APT423325
APT423350
APT423425
APT423450
APT423525
APT423550
APT423625
APT423650
APT423725
APT423750
APT423825
APT423850
APT423925
APT423950
APT424025
APT424050
APT43050
APT43075
APT51075
APT51100
APT53100
APTB001
APTB005
APTCK30
APTCK40
APTCK55
APTCQ01
APTCQ02
APTCQ03
APTCT14110
APTCT1435
APTCT15110
APTCT1535
APTCT16110
APTCT1635
APTCT17110
APTCT1735
APTCT18110
APTCT1835
APTCT19110
APTCT1935
APTCT20110
APTCT2035
APTCT21110
APTCT2135
APTCT22110
APTCT2235
APTCT23110
APTCT2335
APTCT24110
APTCT2435
APTCT25110
APTCT2535
APTCT26110
APTCT2635
APTCT27110
APTCT2735
APTCT28110
APTCT2835
APTCT29110
APTCT2935
APTCT30110
APTCT3035
APTCT31110
APTCT3135
APTCT32110
APTCT3235
APTCT33110
V-7
PART NUMBER INDEX
PART NUMBER INDEX
8
V-8
CODE
ARSDD3A-M1350
AS10127
AS10127
AS10143
AS10143
AS10159
AS10159
AS10160
AS10175
AS10175
AS10191
AS10191
AS10200
AS16200
AS16214
AS16214
AS16250
AS16349
AS16349
AS17586
AS17587
AT-3302
AT-3330
AT-3340
AT-3345
ATC-14P
ATC-18P
ATC-24P
ATC-32P
ATL-00250
ATL-00500
ATL-01000
ATL-05000
ATL-20000
B68G-8GK-AR3-RLG
B72G-2GK-QW3-RMG
B73G-3GK-QD3-RMG
B74G-4GK-AD3-RMG
B74G-6GK-AD3-RMG
BK1
BK6
C6000 - 3FTB
C6000- 3CTC
C6000- 3FTC
C6000- 3FTS
C6000- 3PTC
C6000- 4CTC
C6000- 4FTC
C6000-2FTC
C6000-2FTC
C6000-3CTC
C6000-3FTB
C6000-3FTC
C6000-3PTC
C6000-4CTC
C6000-4FTC
CC20
CC3W1
CCC12
CCC25
CFT10
CFT12
CFT20
CFT25
CH1006
CH1010
CH1505
CH1512
CHT12
CHT20
CHT25
CM/200/3A
CM/330/C
CM/405/3A
CM/500/3A
CM/705/3A
CM/800/3A
CMT10
PAGE
F-7
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
K-14
A-27
A-27
A-12
A-12
L-14
L-14
L-14
L-14
L-25
L-25
L-25
L-25
L-25
Q-11
Q-5
Q-6
Q-7
Q-8
N-9
N-9
I-26
I-26
I-26
I-26
I-26
I-26
I-26
L-15
I-26
L-15
L-15
L-15
L-15
L-15
L-15
P-12
P-12
P-12
P-12
P-12
P-12
P-12
P-12
P-5
P-5
P-5
P-5
P-12
P-12
P-12
H-4
H-5
H-4
H-4
H-5
H-3
P-12
CODE
CMT12
CMT20
CMT25
CSLP1
CSR10022
CSR12015
CSR19008
CT/010/100
D12-1
D12-2
D42
D43
D44
DB121
DC1041
DC1049
DCM14
EM 125 S
EZ-6636
EZ-6636K
EZ-6636KV
EZ-6636V
F68G-8GN-AR3
F68G-8GN-AR3
F72G-2GN-QW3
F73G-3GN-QD3
F74G-4GN-AD3
F74G-6GN-AD3
GC25K
GR12K
GR20K
H320A
H320B
H320C
H320D
H320E
HCR10137
HCR12090
HCR19046
HD030
HD050
HD060
HD075
HD100
HSR10030
HSR12030
HSR19023
HT-1
HT-2
IAT-1008
IAT-1205
IAT-1268
IAT-1539
IAT-1568
IAT-2012
IAT-2025S
IAT-2025SN
IAT-2280L
IAT-2280R
IAT-2511
IAT-3080
IAT-3081
IAT-3082
IAT-3523
IAT-3524
IAT-3525
IAT-3568
IAT-3571I
IAT-3571M
IAT-3573I
IAT-3573M
IAT-3648
IAT-3664
IAT-3681
IAT-3683
IAT-4060
IAT-4088
IAT-4504K
Specifications subject to change without notice. E&OE. ©
PAGE
P-12
P-12
P-12
P-12
P-6
P-6
P-6
H-14
L-26
L-26
L-21
L-21
L-21
H-10
O-19
O-19
I-17
I-16
L-23
L-23
L-23
L-23
Q-12
Q-12
Q-5
Q-6
Q-7
Q-8
E-6
E-8
E-8
L-15
L-16
L-16
L-16
L-16
P-7
P-7
P-7
O-16
O-16
O-16
O-16
O-16
P-6
P-6
P-6
L-26
L-26
C-5
R-7
R-7
C-3
C-3
C-4
C-4
C-4
C-4
C-4
C-5
C-7
C-7
C-7
C-8
C-8
C-8
C-8
C-9
C-9
C-9
C-9
C-10
C-10
C-10
C-10
C-11
C-11
C-12
CODE
IAT-4531D
IAT-4531H
IAT-4531L
IAT-5006S
IAT-5045S
IAT-5050S
IAT-5060S
IAT-5065S
IAT-5260A
IAT-5265A
IAT-5310P
IAT-5311P
IAT-5441P
IAT-5447P
IAT-5455P
IAT-5465P
IAT-5675SE
IAT-5685SE
IAT-6039K
IAT-6041
IAT-6042
IAT-6044
IAT-6110
IAT-6111
IAT-6112
IAT-6113
IAT-6114
IAT-6115
IAT-6116
IAT-6512S
IAT-6522K
IAT-6530A
IAT-6550P
IAT-7020
IAT-7280S
IAT-7515
IAT-7516
IAT-7521
IAT-7525
IAT-7528
IAT-7540
IAT-8010
IAT-8012
IAT-8019
IAT-8025
IAT-8512
IAT-8514
IP900
KI-23
KI-23-6
KI-23K
KI-30
KI-30-6
KI-311J
KI-32
KI-32-6
KI-35-3
KI-36
KI-36-6
KI-38
KI-38-6
KI-38P
KI-38P-6
KI-40
KI-40-8
KI-45
KI-45-8
KI-55
KI-55-8
KI-8571
KI-8571-2
KI-859
KI-859-2
KI-859K
L68M-8GP-ERN
L72M-2GP-QWN
L73M-3GP-QDN
L74M-4GP-QDN
PAGE
C-12
C-12
C-12
C-13
C-13
C-13
C-14
C-14
C-14
C-14
C-14
C-14
C-15
C-15
C-15
C-15
C-15
C-15
C-19
C-19
C-19
C-19
C-20
C-20
C-20
C-20
C-20
C-20
C-20
C-21
C-21
C-21
C-21
C-16
C-12
C-17
C-17
C-18
C-18
C-18
C-16
C-5
C-5
C-6
C-6
C-6
C-6
R-17
B-4
B-4
B-4
B-4
B-5
B-3
B-5
B-5
B-5
B-5
B-6
B-6
B-6
B-6
B-6
B-7
B-7
B-7
B-7
B-7
B-7
B-4
B-4
B-3
B-3
B-3
Q-11
Q-5
Q-6
Q-7
CODE
L74M-6GP-QDN
LRS55
M-30
M-30
M-60
M-60
M-723
M-723
MAY12P
MIS-1280
MIS-184
MJ130
MTA3
MTA5
MUA5
N200-20SF
N200-20SH
N200-20SM
N200-30SF
N200-30SH
N200-30SM
N200-40SF
N200-40SH
N200-40SM
N20PF
N20PH
N20PM
N30PF
N30PH
N30PM
N40PF
N40PH
N40PM
NO241012
NO241012
NO241034
NO241034
NO241214
NO241238
NO241418
NO243412
NO243412
NO243414
NO243438
NO243814
NO25C1010
NO25C1212
NO25C1414
NO25C3434
NO25C3838
NO2610
NO2612
NO2614
NO2634
NO2638
NO2710
NO2712
NO2714
NO2734
NO2738
NO291038
NO291214
NO291238
NO291418
NO293438
NO293814
NO3512
NO3514
NO3534
NO3538
NO6410
NO6412
NO6414
NO6434
NO6438
NO721212
NO721214
NO721238
PAGE
Q-8
I-10
Q-15
Q-15
Q-15
Q-15
Q-15
Q-15
R-17
R-6
R-6
I-17
P-15
P-15
P-15
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-9
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
PART NUMBER INDEX
PAGE
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-13
P-9
P-15
P-15
P-15
P-15
G-4
G-4
G-7
G-5
G-5
G-5
G-5
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
P-14
I-17
I-17
I-17
I-16
I-16
G-3
I-17
G-6
G-6
G-6
G-6
G-7
J-7
J-7
R-16
R-16
J-7
CODE
PT-045
PT-050
PT-070
PT-095
PT-1030
PT-1040
PT-1050
PT-1060
PT-1080
PT-1100
PT-120
PT-1200
PT-1237A
PT-1237Z
PT-124
PT-1600QR
PT-1701
PT-190
PT-200
PT-2000
PT-220
PT-230LV
PT-250
PT-252
PT-260
PT-262
PT-280
PT-300LV
PT-3500
PT-3615D
PT-3615P
PT-3815T
PT-3820T
PT-400
PT-419
PT-6000
PT-6320T
PT-6325T
PT-64008
PT-64012
PT-64017
PT-731
PT-750
PT-835
PT-875
R07-205-RNMG
R68G-8GK-RLG
R72G-2GK-RMG
R73G-3GK-RMG
R74G-4GK-RMG
R74G-6GK-RMG
RAPK2000
RD050
RD074
RD075
RD140
RD2311
RS0300
RS0300-T
RS0400
RS0400-T
RS0550
RS0550-T
RS0550-TR
RS0750
RS0750-TR
RS1000
RS1000-TR
RS1500
RS1500-TR
RS1800-P
RS2000
RS2000-TR
RS3000
RS3000-TR
RS4000
RS5000
SA-1
PAGE
J-6
J-7
J-6
J-6
J-9
J-9
J-10
J-10
J-10
J-10
J-8
R-18
J-3
J-3
J-8
R-18
R-16
J-8
J-4
R-19
J-5
J-5
J-8
R-9
J-5
R-9
J-4
J-5
R-19
R-10
R-10
R-11
R-11
J-4
J-9
R-19
R-12
R-12
R-13
R-13
R-13
R-15
R-18
R-8
R-8
Q-14
Q-12
Q-5
Q-6
Q-7
Q-8
H-10
L-22
H-6
L-22
H-5
H-14
O-5
O-6
O-6
O-7
O-7
O-8
O-8
O-9
O-9
O-10
O-10
O-11
O-11
O-19
O-12
O-12
O-13
O-13
O-14
O-14
N-5
CODE
SA-11
SA-14
SA-1AC
SA-1XL
SA-2
SA-3
SA-3AC
SA-3XL
SA-4
SA-42
SA-43
SA-5
SA-51
SA-5AC
SA-5XL
SA-6
SA-7
SA-9
SAN-18P
SAN-24P
SAN-32P
SB-1
SB-1
SB-11
SB-14
SB-1AC
SB-1XL
SB-2
SB-3
SB-3
SB-3AC
SB-3XL
SB-4
SB-5
SB-5AC
SB-5XL
SB-6
SB-7
SC-1
SC-11
SC-14
SC-1AC
SC-1XL
SC-2
SC-3
SC-3AC
SC-3XL
SC-4
SC-41
SC-42
SC-5
SC-51
SC-5AC
SC-5XL
SC-6
SC-7
SD-1
SD-11
SD-14
SD-1AC
SD-1XL
SD-2
SD-3
SD-3AC
SD-3XL
SD-4
SD-42
SD-5
SD-51
SD-5AC
SD-5XL
SD-6
SD-7
SD-9
SE-1
SE-1AC
SE-1XL
SE-3
PAGE
N-5
N-5
N-7
N-5
N-5
N-5
N-7
N-5
N-5
N-8
N-8
N-5
N-8
N-7
N-5
N-5
N-5
N-5
L-14
L-14
L-14
L-26
N-5
N-5
N-5
N-7
N-5
N-5
L-26
N-5
N-7
N-5
N-5
N-5
N-7
N-5
N-5
N-5
N-5
N-5
N-5
N-7
N-5
N-5
N-5
N-7
N-5
N-5
N-8
N-8
N-5
N-8
N-7
N-5
N-5
N-5
N-5
N-5
N-5
N-7
N-5
N-5
N-5
N-7
N-5
N-5
N-8
N-5
N-8
N-7
N-5
N-5
N-5
N-5
N-6
N-7
N-6
N-6
CODE
SE-3AC
SE-3XL
SE-41
SE-5
SE-51
SE-5AC
SE-5XL
SE-6
SE-7
SF-1
SF-1AC
SF-1XL
SF-3
SF-3AC
SF-3XL
SF-401
SF-402
SF-403
SF-404
SF-41
SF-42
SF-5
SF-51
SF-5AC
SF-5XL
SF-6
SF-7
SG-1
SG-1XL
SG-3
SG-3XL
SG-44
SG-5
SG-51
SG-5XL
SG-6
SG-7
SH-2
SH-2XL
SH-41
SH-5
SH-5XL
SH-6
SH-7
SI-1060
SI-1065
SI-1070
SI-1107B
SI-1108B
SI-1130A
SI-1140
SI-1161
SI-1166-8A
SI-1166A
SI-1200B
SI-1205B
SI-1207
SI-1208
SI-1208Q
SI-1241A
SI-1251
SI-1252
SI-1261
SI-1262
SI-1288S
SI-1288SK
SI-1301
SI-1301D
SI-1305
SI-1310
SI-1315
SI-1320A
SI-1325A
SI-1340B
SI-1345B
SI-1351
SI-1355
SI-1356D
PAGE
N-7
N-6
N-8
N-6
N-8
N-7
N-6
N-6
N-6
N-6
N-7
N-6
N-6
N-7
N-6
P-15
P-15
P-15
P-15
N-8
N-8
N-6
N-8
N-7
N-6
N-6
N-6
N-6
N-6
N-6
N-6
N-8
N-6
N-8
N-6
N-6
N-6
N-6
N-6
N-8
N-6
N-6
N-6
N-6
D-9
D-10
D-10
D-20
D-20
D-35
D-35
D-35
D-35
D-35
D-20
D-21
D-20
D-21
D-21
D-21
D-20
D-21
D-22
D-22
D-23
D-23
D-11
D-9
D-11
D-11
D-11
D-22
D-22
D-22
D-22
D-11
D-12
D-10
Specifications subject to change without notice. E&OE. ©
9
PART NUMBER INDEX
CODE
NO721414
NO721418
NO723412
NO723814
NO723818
NO723838
NO73112
NO731214
NO731238
NO73134
NO731418
NO733412
NO733438
NO733814
NO733818
NRL20PM
O1214
O3412
O5838
O916516
P-540
P-541
P-544
P-570
P-580
P-592
P-593
P101212
P101214
P101238
P101414
P101438
P103812
P103814
P103838
P1051614
P1051638
P31010
P31034
P31212
P31214
P31234
P31238
P31412
P31414
P31438
P33410
P33412
P33434
P33812
P33814
P33838
P351612
P351614
P351638
P710
P712
P714
P734
P738
P7516
PKR80
PL90
PM120S
PMH 70F
PMH 70X
PN-1000
PR120S
PS-521
PS-523
PS-526
PSV-532
PSV-534
PT-005
PT-008
PT-0115
PT-0140
PT-016
V-9
PART NUMBER INDEX
PART NUMBER INDEX
10
V-10
CODE
SI-1365
SI-1365D
SI-1370
SI-1370D
SI-1420T
SI-1422T
SI-1435
SI-1440T
SI-1442T
SI-1456
SI-1480A
SI-1482A
SI-1490
SI-1492
SI-1550
SI-1556
SI-1605
SI-1610
SI-1760T
SI-1766T
SI-1770T
SI-1776T
SI-2001S
SI-2002
SI-2005
SI-2006S
SI-2008
SI-2009
SI-2009H
SI-2010
SI-2011S
SI-2012
SI-2015A
SI-2015AD
SI-2018A
SI-2022S
SI-2023
SI-2026
SI-2033
SI-2050AG
SI-2050AGR
SI-2051SG
SI-2107A
SI-2108
SI-2110
SI-2201R
SI-2202
SI-2210
SI-2210R
SI-2221
SI-2300
SI-2322WR-E
SI-2351
SI-2351W
SI-2351WM14
SI-2400
SI-2405
SI-2415
SI-2451
SI-2451LP
SI-2451W
SI-2451WM14
SI-2500L
SI-2501L
SI-2505L
SI-2515LA
SI-2515LA-W
SI-2600L
SI-2700
SI-2700L
SI-2700LS
SI-2760
SI-2800
SI-2830
SI-3001A
SI-3003A
SI-3007
SI-3011A
PAGE
D-12
D-10
D-11
D-10
D-12
D-12
D-23
D-12
D-13
D-13
D-13
D-13
D-13
D-13
D-14
D-14
D-12
D-13
D-14
D-14
D-14
D-14
D-5
D-5
D-6
D-6
D-26
D-17
D-26
D-5
D-6
D-6
D-6
D-3
D-38
D-6
D-7
D-27
D-16
D-7
D-26
D-5
D-30
D-29
D-30
D-26
D-26
D-27
D-27
D-17
D-27
D-33
D-27
D-33
D-33
D-18
D-18
D-17
D-19
D-19
D-33
D-33
D-7
D-7
D-8
D-8
D-8
D-8
D-24
D-24
D-24
D-25
D-24
D-24
D-28
D-28
D-29
D-28
CODE
SI-3013A
SI-3018A
SI-3100
SI-3100P
SI-3100V
SI-3101-6
SI-3102
SI-3103-6A
SI-3105-6
SI-3111-6
SI-3112
SI-3113-6A
SI-3115R-6
SI-3118-6
SI-3200AK
SI-3200AS
SI-3300
SI-4120AK
SI-4150
SI-4300
SI-45
SI-4500
SI-4600
SI-4700B
SI-4710
SI-4730
SI-4800
SI-5100A
SI-5200A
SI-5300A
SI-5300FC
SI-5300PS
SI-5300SS
SI-5305-8A
SI-5305A
SI-5305AQC
SI-5355
SI-5405
SI-5405-6
SI-5500
SI-5500E
SI-5501
SI-5505
SI-5506
SI-5800
SI-5850A
SI-6000A
SL-1
SL-1AC
SL-1XL
SL-2
SL-3
SL-3AC
SL-3XL
SL-4
SL-41
SL-4AC
SL-4XL
SL-6
SL-7
SM-1
SM-2
SM-4
SM-41
SM-43
SM-5
SM-51
SM-6
SMARTPANTHER3
SMARTPUMA3
SMTS10
SMTS15
SMTS20
SN-1
SN-2
SN-3
SP-102-14
SP-102-58011
Specifications subject to change without notice. E&OE. ©
PAGE
D-29
D-29
D-31
D-18
D-32
D-32
D-31
D-32
D-32
D-32
D-31
D-33
D-33
D-33
D-36
D-29
D-29
D-9
D-15
D-34
D-36
D-36
D-16
D-34
D-34
D-34
D-19
D-3
D-4
D-3
D-36
D-37
D-36
D-5
D-4
D-35
D-3
D-4
D-5
D-3
D-37
D-4
D-4
D-4
D-37
D-37
D-38
N-6
N-7
N-6
N-6
N-6
N-7
N-6
N-6
N-8
N-7
N-6
N-6
N-6
N-6
N-6
N-6
N-8
N-8
N-6
N-8
N-6
H-3
H-3
P-12
P-12
P-12
N-6
N-6
N-6
L-24
L-24
CODE
SP-102SPWR
SP-103-10125
SP-103-10150
SP-F400-R10125
SP-F400-R10150
SP-H500-14
SP-H500-R
SP-H900-14
SP-H900-R
SP-R700-14
SP-R700-R
SP-R700-RSP14
SP-RHS500-14
SP-RHS500-R
SRNS12
SRNS20
SRNS25
SSBS12
SSBS20
SSBS25
SSNS12
SSNS20
SSNS25
SSSS12
SSSS20
SSSS25
T-2607
T-2607B
T-3307
T-3307B
T-3310
T-3312
T-4407
T-4407B
T-7507
T-7507B
T-7510
T-7512
T64T-6GB-P1N
T68C-8GB-B2N
T72T-2GA-P1N
T72T-3GA-P1N
T73T-2GA-P1N
T73T-3GA-P1N
T73T-4GA-P1N
T74T-3GA-P1N
T74T-4GA-P1N
T74T-6GA-P1N
TF120
TF140
TM120
TM120 NEG
TM140
TM140 NEG
TP-12FL
TP-1L
TP-2L
TP-34L
TP-3L
TP-4L
TP-5L
TPG 540
TPG 650
TPG 650/C/S
TR120
TR140
TS-MI12
TS-MI14
TS-MI36
TS-MI54
TS-MI82
TS-MO12
TS-MO14
TS-MO36
TS-MO54
TS-MO82
TT1210
TW120
PAGE
L-24
L-24
L-24
L-24
L-24
L-24
L-24
L-24
L-24
L-24
L-24
L-24
L-24
L-24
P-12
P-12
P-12
P-12
P-12
P-12
P-12
P-12
P-12
P-12
P-12
P-12
O-17
O-17
O-17
O-17
O-17
O-17
O-17
O-17
O-17
O-17
O-17
O-17
Q-13
Q-13
Q-9
Q-9
Q-9
Q-9
Q-9
Q-9
Q-9
Q-9
I-17
I-17
I-17
I-17
I-17
I-17
Q-17
Q-16
Q-16
Q-17
Q-16
Q-17
Q-17
I-6
I-6
I-6
I-17
I-17
R-4
R-5
R-5
R-5
R-5
R-3
R-3
R-4
R-4
R-4
P-14
I-17
CODE
TW140
TW200
TW200D
US06
US10
US12
US20
US25
V1150
V1300
V1600
V1800
V185
V210
V300
V375
V750
V825
V900
V950
Various
Various
Various
Various
Various
various
Various
VLLRS55
WD08-14
WD11-17
WD13-20
WD19-28
WD22-32
WD26-38
Y64A-6GA-N1N
Y64A-6GA-N2N
Y64A-6GA-N2N
Y68A-6GA-N3N
Y68A-8GN-N1N
Y68A-8GN-N2N
Y68A-8GN-N3N
PAGE
I-17
I-17
I-17
P-11
P-11
P-11
P-11
P-11
O-18
O-18
O-18
O-18
O-18
O-18
O-18
O-18
O-18
O-18
O-18
O-18
A-23
A-23
A-23
A-23
A-23
R-15
E-16
I-10
P-15
P-15
P-15
P-15
P-15
P-15
Q-12
Q-12
Q-12
Q-12
Q-12
Q-12
Q-12
D-15
I-13
SECTION W
PRODUCT
DESCRIPTION
INDEX
•
This section contains an index by generic description and brand
name of all the tools and machines featured in this catalogue
referenced to the page numbers on which they occur.
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION INDEX
2
W-2
PRODUCT DESCRIPTION
‘O’ CLIPS - for braided hose, 12.7mm(½”), 14.3mm(9/16"), 15.9mm(5/8"), 19.1mm(3/4")I.D.
BRAND
ALLIANCE
PART NUMBER
*
PG.
P-15
ADAPTOR - for Rubber Eraser Wheel IAT-6113
AIR COMPRESSOR - diesel, rotary screw, base mounted, silenced enclosure, Kubota engine, 10000lt/min(353cfm), 7bar(102psi), 68dBA
AIR COMPRESSOR - diesel, rotary screw, base mounted, silenced enclosure, Kubota engine, 3400lt/min(120cfm), 7bar(102psi), 68dBA
AIR COMPRESSOR - diesel, rotary screw, base mounted, silenced enclosure, Kubota engine, 5000lt/min(176cfm), 7bar(102psi), 68dBA
AIR COMPRESSOR - diesel, rotary screw, base mounted, silenced enclosure, Kubota engine, 6400lt/min(220cfm), 7bar(102psi), 68dBA
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced encl., Cat or Cummins engine, 32600lt/min(1150cfm), 24.1bar(350psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced encl., John Deere or Cat engine, 10600lt/min(375cfm), 10.3bar(150psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Cat or Cummins engine, 21200lt/min(750cfm), 10.3bar(150psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Cat or Cummins engine, 23400lt/min(825cfm), 8.6bar(125psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Cat or Cummins engine, 25500lt/min(900cfm), 6.9bar(100psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Caterpillar engine, 26900lt/min(950cfm), 24.1bar(350psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Caterpillar engine, 36800lt/min(1300cfm), 10.3bar(150psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Caterpillar engine, 45300lt/min(1600cfm), 10.3bar(150psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Caterpillar engine, 51000lt/min(1800cfm), 8.6bar(125psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, John Deere engine, 5900lt/min(210cfm), 10.34bar(150psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, John Deere engine, 8490lt/min(300cfm), 13.79bar(200psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, John Deere or Cat engine, 5200lt/min(185cfm), 6.9bar(100psi)
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Kubota engine, 10000lt/min(353cfm), 7bar(102psi), 69dBA
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Kubota engine, 3400lt/min(120cfm), 7bar(102psi), 68dBA
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Kubota engine, 4100lt/min(145cfm), 10bar(145psi), 68dBA
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Kubota engine, 5000lt/min(176cfm), 7bar(102psi), 68dBA
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Kubota engine, 6400lt/min(220cfm), 7bar(102psi), 68dBA
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Kubota engine, 7500lt/min(265cfm), 12bar(174psi), 69dBA
AIR COMPRESSOR - diesel, rotary screw, trailer mounted, silenced enclosure, Kubota engine, 8500lt/min(300cfm), 10bar(145psi), 69dBA
AIR COMPRESSOR - diesel, rotary screw, trailer mounted,silenced enclosure, Kubota engine, 3400lt/min(120cfm), 12bar(174psi), 68dBA
AIR COMPRESSOR - electric, piston, 12 Volt DC, 375Watt(0.5hp), 40amp, 72lt/min(2.55cfm), 6.9bar( 100psi)
AIR COMPRESSOR - electric, piston, 24 Volt DC, 375Watt(0.5hp), 20amp, 72lt/min(2.55cfm), 6.9bar( 100psi)
AIR COMPRESSOR - electric, rotary screw, air tank mount., refrigerated dryer, silenced, 415Volt, 11kW(15hp), 1500lt/min(54cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, air tank mount., ref. dryer, silenced, 415Volt, 15kW(20hp), 1850lt/min(66cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, air tank mount., ref. dryer, silenced, 415Volt, 4.0kW(5.5hp), 550lt/min(19.2cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, air tank mount., ref. dryer, silenced, 415Volt, 5.5kW(7.5hp), 750lt/min(26.2cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, air tank mounted, silenced enclosure, 415Volt, 22kW(30hp), 3000lt/min(107cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, air tank mounted, silenced, 240Volt, 2.2kW(3hp), 300lt/min(10.5cfm), 9bar(130psi)
AIR COMPRESSOR - electric, rotary screw, air tank mounted, silenced, 415Volt, 3.0kW(4hp), 400lt/min(14.0cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, air tank mounted, silenced, 415Volt, 4.0kW(5.5hp), 550lt/min(19.2cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, air tank mount., silenced, ref. dryer, 415Volt, 7.5kW(10hp), 1000lt/min(35cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, base mounted in silenced enclosure, 415Volt, 22kW(30hp), 3000lt/min(107cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, base mounted, silenced enclosure, 415Volt, 22kw(30hp), 3500lt/min(127cfm), 8bar(116psi)
AIR COMPRESSOR - electric, rotary screw, base mounted, silenced enclosure, 415Volt, 30kW(40hp), 4000lt/min(151cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, base mounted, silenced enclosure, 415Volt, 37kW(50hp), 5200lt/min(187cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, base mounted, silenced enclosure, 415Volt, 37kw(50hp), 6100lt/min(215cfm), 8bar(116psi)
AIR COMPRESSOR - electric, rotary screw, base mounted, silenced enclosure, 415Volt, 45kw(60hp), 7300lt/min(258cfm), 8bar(116psi)
AIR COMPRESSOR - electric, rotary screw, base mounted, silenced enclosure, 415Volt, 55kw(75hp), 9800lt/min(356cfm), 8bar(116psi)
AIR COMPRESSOR - electric, rotary screw, base mounted, silenced enclosure, 415Volt, 75kw(100hp), 13000lt/min(472cfm), 8bar(116psi)
AIR COMPRESSOR - electric, rotary screw, base plate mounted, silenced, 240Volt, 2.2kW(3hp), 300lt/min(10.5cfm), 9bar(130psi)
AIR COMPRESSOR - electric, rotary screw, base plate mounted, silenced, 415Volt, 11kW(15hp), 1500lt/min(54cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, base plate mounted, silenced, 415Volt, 15kW(20hp), 1850lt/min(66cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, base plate mounted, silenced, 415Volt, 3.0kW(4hp), 400lt/min(14.0cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, base plate mounted, silenced, 415Volt, 4.0kW(5.5hp), 550lt/min(19.2cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, base plate mounted, silenced, 415Volt, 5.5kW(7.5hp), 750lt/min(26.2cfm), 10bar(143psi)
AIR COMPRESSOR - electric, rotary screw, base plate mounted, silenced, 415Volt, 7.5kW(10hp), 1000lt/min(35cfm), 10bar(143psi)
AIR COMPRESSOR - petrol, rotary screw, hand portable, Honda engine, 1982lt/min(70cfm), 6.9bar(100psi)
AIR DRYER - refrigerated, free standing, 10500lt/min(371cfm), 240Volt
AIR DRYER - refrigerated, free standing, 14500lt/min(512cfm), 240Volt
AIR DRYER - refrigerated, free standing, 3100lt/min(109cfm), 240Volt
AIR DRYER - refrigerated, free standing, 4000lt/min(141cfm), 240Volt
AIR DRYER - refrigerated, free standing, 5500lt/min(194cfm), 240Volt
AIR DRYER - refrigerated, free standing, 8100lt/min(286cfm), 240Volt
AIR MISTER - with stand, 1205cfm
AIR MISTERS - with stand, 1465cfm to 8220cfm
AIR MOVERS - venturi, 1205cfm to 1465cfm
AIR MOVERS - venturi, 3698cfm to 8220cfm
AIR RECEIVER - vertical, 505x2298mm, 320litre(11.3cubic feet), 11bar(160psi)
AIR RECEIVER - vertical, 620x2460mm, 515litre(18.2cubic feet), 14bar(203psi)
BACK-UP PAD - 50mm dia EZ-LOK, rubber
BACK-UP PAD - 75mm dia EZ-LOK, rubber
BALL VALVES - 1/4", 3/8", 1/2", 3/4", 1" FBSP
BANDSAW - portable, 114mm cutting capacity, 122m/min,
BASE PLATE - for AL-1513, hook & loop, 35mm x 93mm
BASE PLATE - for AL-1513, hook & loop, 60mm x 100mm
BASE PLATE - for AL-1513, hook & loop, 80mm x 100mm
BELTS - abrasive, 10 x 330mm, 40, 60, 80, 120 grit, for general purpose metal work
BELTS - abrasive, 20 x 520mm, 40, 60, 80, 120 grit, for general purpose metal work
BELTS- abrasive, 30 x 540mm, 40, 60, 80, 120 grit, for general purpose metal work
BLANKING PLUG - "Olympian Plus" plug-in system
BLOW GUN - extended - plastic body
BLOW GUN - in-line, metal body, button operated, rubber tip
BLOW GUN - metal body, optional top entry
BLOW GUN - standard - plastic body
BOLT CUTTER - 13mm mild steel
BRACKET - "Olympian Plus" plug-in system, for wall mounting, for L64 one litre bowl
BRACKET - "Olympian Plus" plug-in system, for wall mounting, standard
BRASS FITTING - screwed & barbed hose tails, barbed joiners,
BRASS FITTING - screwed bushes, elbows, sockets, nipples, tees, plugs, adaptors
IAT
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
MISC
MISC
MISC
MISC
PNEUTECH
PNEUTECH
ALLIANCE
ALLIANCE
ALLIANCE
MISC
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
NORGREN
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
MISC
NORGREN
NORGREN
ALLIANCE
ALLIANCE
IAT-6112
T-7507B
T-2607B
T-3307B
T-4407B
V1150
V375
V750
V825
V900
V950
V1300
V1600
V1800
V210
V300
V185
T-7507T
T-2607T
T-3310T
T-3307T
T-4407T
T-7512T
T-7510T
T-3312T
DC1041
DC1049
RS1500-TR
RS2000-TR
RS0550-TR
RS0750-TR
RS3000-TR
RS0300-T
RS0400-T
RS0550-T
RS1000-TR
RS3000
HD030
RS4000
RS5000
HD040
HD060
HD075
HD100
RS0300
RS1500
RS2000
RS0400
RS0550
RS0750
RS1000
RS1800P
ACT10500
ACT14500
ACT03100
ACT04000
ATC05500
ACT08100
TS-MI12
*
*
*
AR320-V
AR515-V
RD050
RD075
*
MIS-184
28A
28B
28C
*
*
*
18-999-225
AG-4L
AG-6
AG-5M
AG-4
MIS-1280
74504-52
74504-50
*
*
C-20
O-17
O-17
O-17
O-17
O-18
O-18
O-18
O-18
O-18
O-18
O-18
O-18
O-18
O-18
O-18
O-18
O-17
O-17
O-17
O-17
O-17
O-17
O-17
O-17
O-19
O-19
O-11
O-12
O-8
O-9
O-13
O-6
O-7
O-8
O-10
O-13
O-16
O-14
O-14
O-16
O-16
O-16
O-16
O-5
O-11
O-12
O-6
O-7
O-9
O-10
O-19
O-20
O-20
O-20
O-20
O-20
O-20
R-4
R-5
R-3
R-4
O-20
O-20
L-22
L-22
P-14
R-6
A-23
A-23
A-23
L-3
L-3
L-3
Q-12
A-3
A-3
A-3
A-3
R-6
Q-13
Q-13
P-14
P-13
Specifications subject to change without notice. E&OE. ©
PRODUCT DESCRIPTION INDEX
BRAND
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
CHIEFTAIN
CHIEFTAIN
CHIEFTAIN
CHIEFTAIN
CHIEFTAIN
CHIEFTAIN
CHIEFTAIN
CHIEFTAIN
CHIEFTAIN
CHIEFTAIN
ALLIANCE
ALLIANCE
MOTOR GUARD
MOTOR GUARD
ALLIANCE
PNEUTECH
PNEUTECH
APT
APT
APT
APT
APT
APT
PNEUTECH
PNEUTECH
PNEUTECH
APT
APT
APT
APT
APT
APT
APT
APT
APT
APT
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
ALLIANCE
ALLIANCE
ALLIANCE
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
APT
IAT
IAT
SHINANO
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
TRELAWNY
TRELAWNY
TRELAWNY
PART NUMBER
705.906
705.908
705.91
157.55
BDM-1
BK-1
BK-6
SE-1AC to SL-4AC
SA-1AC to SD-5AC
SM-1 to SN-3
SA-11 to SD-9
SE-1 to SH-7
SA-42 to SF-51
SG-44 to SM-51
AA-817
AA-806
M-60
M-30
AL-3254
PT-1237A
PT-1237Z
APT-454H
APT-452H
APT-453H
APT-654H
APT-652H
APT-653H
PT-045
PT-070
PT-095
*
9266
2109
3388
2698
5550
18290
3383
3026
6144
704.1101
704.31011
704.1107
704.3107
704.2105
704.3205
704.111
704.3111
704.1103
704.3103
704.1105
704.3105
704.1106
704.1112
AA-814
AA-5001
AA-400-8
114.12
124.22
125.23
134.32
135.33
144.42
196.2203
196.2213
196.3203
196.2255
CC3W1
*
*
CSLP1
APT-118
IAT-6044
IAT-6042
*
AA-330-24
AA-330-25
AA-330-26
AA-330-19
AA-818
AA-805
AA-340-57
AA-760908
159.591
340.490/S
340.16
PG.
I-34
I-34
I-34
I-34
N-9
N-9
N-9
N-7
N-7
N-6
N-5
N-6
N-8
N-8
L-18
L-17
Q-15
Q-15
A-4
J-3
J-3
K-4
K-4
K-4
K-3
K-3
K-3
J-6
J-6
J-6
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
K-4
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
I-23
L-18
L-14
L-14
I-21
I-21
I-22
I-22
I-22
I-22
I-22
I-21
I-22
I-28
P-12
P-12
P-12
P-12
K-5
C-19
C-19
D-15
L-20
L-20
L-20
L-20
L-18
L-17
L-6
L-6
I-35
I-42
I-42
Specifications subject to change without notice. E&OE. ©
3
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION
BREAKER ACCESSORIES - 25mm x 360mm long straight chisel, 7/8" hexagon shank
BREAKER ACCESSORIES - 50mm x 360mm long straight chisel, 7/8" hexagon shank
BREAKER ACCESSORIES - 75mm x 360mm long straight chisel, 7/8" hexagon shank
BREAKER, 'STRONGA' - long reach, vibration isolated handle, 7/8" hexagon shank, 2000bpm
BURR DISPLAY MERCHANDISER
BURR KIT - No. 1 - Includes 12 x 1/8"shank burrs
BURR KIT - No. 6 - Includes 8 x 1/4" shank burrs
BURRS - tungsten carbide, aluminium cut, 1/4" shank, egg shape, rounded tree shape, 14° included angle
BURRS - tungsten carbide, aluminium cut, 1/4"shank, cylindrical, cylindrical end cut, cylindrical ball nose, ball shape
BURRS - tungsten carbide, double cut, 1/4"shank, cone shape, 14° included angle, inverted cone
BURRS - tungsten carbide, double cut, 1/4"shank, cylindrical, cylindrical end cut, cylindrical ball nose, ball shape
BURRS - tungsten carbide, double cut, 1/4"shank, egg shape, rounded tree shape, pointed tree shape, flame shape
BURRS - tungsten carbide, double cut, 1/8"shank, cylindrical, cylindrical ball nose, ball shape, egg shape, round tree shape
BURRS - tungsten carbide, double cut, 1/8"shank, pointed tree shape, flame shape, 8° included angle, cone shape
BUSHING DRIVER - 10.2mm round shank
BUSHING SPLITTER - 10.2mm round shank
CANISTER FILTER - sub-micronic, 1/2" side inlet and outlet
CANISTER FILTER - sub-micronic, 1/4" bottom inlet and outlet, includes wall bracket
CAULKING GUN - standard, 50 x 210mm cartridge
CHAINSAW - heavy duty, 17" bar, aluminium casing
CHAINSAW - heavy duty, 17"bar, zamac casing, spark resistant
CHIPPING HAMMER - 0.580" hex. shank, oval collar ret., 28.6mm bore x 100mm stroke, 1375bpm, 4 bolt handle
CHIPPING HAMMER - 0.580" hex. shank, oval collar ret., 28.6mm bore x 50mm stroke, 2100bpm, 4 bolt handle
CHIPPING HAMMER - 0.580" hex. shank, oval collar ret., 28.6mm bore x 75mm stroke, 1650bpm, 4 bolt handle
CHIPPING HAMMER - 0.580" hexagon shank, oval collar retainer, 28.6mm bore x 100mm stroke, 1375bpm
CHIPPING HAMMER - 0.580" hexagon shank, oval collar retainer, 28.6mm bore x 50mm stroke, 2100bpm
CHIPPING HAMMER - 0.580" hexagon shank, oval collar retainer, 28.6mm bore x 75mm stroke, 1650bpm
CHIPPING HAMMER - 4.5kg, 14.7 x 60mm chuck
CHIPPING HAMMER - 7.0kg, 14.7 x 60mm chuck
CHIPPING HAMMER - 9.5kg, 22 x 82.5mm chuck
CHIPPING HAMMER ACCESSORIES - 0.580" hex shank - moil points, chisels, chisel blanks, bush hammers, clay spade, rod drivers
CHIPPING HAMMER ACCESSORIES - 2.4m x ½” ID whip hose, uni coupler and ½” NPT swivel for APT Hammers
CHIPPING HAMMER ACCESSORIES - 2.4m x ½” ID whip hose, uni coupler and 7/8”-24 swivel for APT Hammers
CHIPPING HAMMER ACCESSORIES - 7/8”-24 to ½” hose tail swivel for APT Chipping Hammers
CHIPPING HAMMER ACCESSORIES - 7/8”-24 to 3/8” NPT swivel for Chipping Hammers
CHIPPING HAMMER ACCESSORIES - Ball-type retainer for APT Chipping Hammers
CHIPPING HAMMER ACCESSORIES - Bolt-on quick change retainer (no springs) for APT Chipping Hammers
CHIPPING HAMMER ACCESSORIES - Latch type retainer (no springs) for APT Chipping Hammers
CHIPPING HAMMER ACCESSORIES - Quick-change retainer (oval collar) for APT Chipping Hammers
CHIPPING HAMMER ACCESSORIES - Round Collar retainer for APT Chipping Hammers
CHISEL - 12mm sq. shank, 19mm wide x 178mm long, weld spatter removal
CHISEL - 12mm sq. shank, 19mm wide x 178mm long, weld spatter removal - for low vibration tools
CHISEL - 12mm sq. shank, 19mm wide x 254mm long, weld spatter removal and sand casting dressing
CHISEL - 12mm sq. shank, 19mm wide x 254mm long, weld spatter removal and sand casting dressing - for low vib. tools
CHISEL - 12mm sq. shank, 35mm wide cranked blade x 178mm long, weld flux and thick coating removal
CHISEL - 12mm sq. shank, 35mm wide cranked blade x 178mm long, weld flux and thick coating removal - low vib. Tools
CHISEL - 12mm sq. shank, 50mm wide x 178mm long, spark resistant aluminium bronze
CHISEL - 12mm sq. shank, 50mm wide x 178mm long, spark resistant aluminium bronze - for low vibration tools
CHISEL - 12mm sq. shank, 64mm wide x 178mm long, paint & rust removal
CHISEL - 12mm sq. shank, 64mm wide x 178mm long, paint & rust removal - for low vibration tools
CHISEL - 12mm sq. shank, 64mm wide x 254mm long, paint & rust removal
CHISEL - 12mm sq. shank, 64mm wide x 254mm long, paint & rust removal - for low vibration tools
CHISEL - 12mm sq. shank, 6mm wide x 203mm long, mortar removal for re-pointing brickwork
CHISEL - 12mm sq. shank, moil point x 178mm long, concrete chipping
CHISEL BLANK - 10.2mm round shank
CHISEL RETAINER - quick change
CHISEL RETAINER - spring
CHISEL SCALER - Model 1B, straight grip, front exhaust, 12mm square shank, 3800bpm
CHISEL SCALER - Model 2B, straight grip, front exhaust, 12mm square shank, 3800bpm
CHISEL SCALER - Model 2BPG, pistol grip, front exhaust, 12mm square shank, 3000bpm
CHISEL SCALER - Model 3B, semi pistol grip, front exhaust, 12mm square shank, 2200bpm
CHISEL SCALER - Model 3BPG, pistol grip, front exhaust, 12mm square shank, 2200bpm
CHISEL SCALER - Model 4B, semi pistol grip, front exhaust, 12mm square shank, 2200bpm
CHISEL SCALER - Model VL203, pistol grip, low vibration, 12mm square shank, 2400bpm
CHISEL SCALER - Model VL223, straight grip, low vibration, 12mm square shank, 2400bpm
CHISEL SCALER - Model VL303, pistol grip, low vibration, 12mm square shank, 3000bpm
CHISEL SCALER KIT - includes 1B & VL203 chisel scalers
CLAW COUPLINGS - 3-way coupling
CLAW COUPLINGS - for 1/2", 3/4", 1" hose, 3/8", 1/2", 3/4", 1" male & female BSP threads
CLAW COUPLINGS - hose clamps, ½”, 3/4", 1" I.D. hose
CLAW COUPLINGS - Safety locking pin
CLAY DIGGER - 14kg, 22 x 82mm chuck, 2400bpm
CLEAN & STRIP TOOL - central vacuum, polymer body cover, 4090rpm
CLEAN & STRIP TOOL - standard, polymer body cover, 4090rpm
CLUTCH MECHANISMS - for impact wrenches - explanations
COLLET - 1/4", for Shinano & Alliance die grinders
COLLET - 1/8", for Shinano & Alliance die grinders
COLLET - 3mm, for Shinano & Alliance die grinders
COLLET - 6mm, for Shinano & Alliance die grinders
CRANKED FLAT CHISEL - 10.2mm round shank
CRANKED WIDE CHISEL - 10.2mm round shank
CUP-WHEEL - grinding, 30mm x M7x0.75
CUT-OFF WHEEL - 75mm x 1.2mm x 9.35mm CH
DECK SCALER - Model SF11, 11 heads, 11 x 3000bpm
DECK SCALER - Trident Neptune, air motor, flexible shaft, 17mm cutting width, 3000rpm
DECK SCALER ACCESSORIES - 6” power brush, for Trident Neptune
W-3
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION INDEX
4
W-4
PRODUCT DESCRIPTION
DECK SCALER ACCESSORIES - 6” twisted knot brush, for Trident Neptune
DECK SCALER ACCESSORIES - Crimped wire cup brush, for Trident Neptune
DECK SCALER ACCESSORIES - Cutter head for SF11, bush hammer, taper fi t
DECK SCALER ACCESSORIES - Cutter head for SF11, cruciform, taper fi t
DECK SCALER ACCESSORIES - Cutter head for SF11, cruciform, taper fi t, beryllium copper
DECK SCALER ACCESSORIES - Dust shroud for SF11
DECK SCALER ACCESSORIES - Heavy duty scaling head with chipping leaves, for Trident Neptune
DECK SCALER ACCESSORIES - Piston for SF11 cutter heads, taper shank
DECK SCALER ACCESSORIES - Six cutter scaling head, for Trident Neptune
DECK SCALER ACCESSORIES - Twisted knot cup brush, for Trident Neptune
DECK SCALER ACCESSORIES - Vacuum skirt and hose for SF11
DEMOLITION HAMMER - 10kg, 22 x 82mm chuck, 2120bpm
DIGITAL TORQUE METERS - 1.50Nm & 15.0Nm capacity
DISC - abrasive, flap, 100mm dia, 16mm CH
DISC - clean & strip, 100mm dia, 16mm CH
DISC - clean & strip, 100mm, 16mm CH
DISC - clean & strip, 115mm dia, 22mm CH
DISC - clean & strip, 125mm dia, 22mm CH
DISC - cleaning & conditioning, woven, 100mm dia, 16mm CH
DISC - grinding, 50mm, 9.35mm CH
DISC - polishing and buffing, wool, 100mm dia, 16mm CH
DISC KIT - surface conditioning, 50mm, includes backing pad, mandrel and 4 surface conditioning discs
DISC KIT - surface conditioning, 75mm, includes backing pad, mandrel and 4 surface conditioning discs
DISCS - abrasive, hook & loop, 50mm, 60, 80, 120, 150, 240, 400, 600 grit, for general purpose sanding work
DISCS - abrasive, hook & loop, 75mm, 40, 60, 80, 120, 240 grit, for general purpose sanding work
DISCS - abrasive, quick mount, 50mm, 24, 40, 60, 80, 120 grit, for general purpose metal work
DISCS - abrasive, quick mount, 75mm, 40, 60, 80, 120 grit, for general purpose metal work
DISCS - surface conditioning, quick mount, 50mm, fine(blue), medium(maroon) & coarse(brown)
DISCS - surface conditioning, quick mount, 75mm, fine grit(blue), medium(maroon) & coarse(brown)
DOUBLE EDGE PANEL CUTTER - 10.2mm round shank
DRILL - "T"-handle, No.2 morse taper, 350rpm, reversible, 22mm drilling, 16mm reaming, 16mm tapping
DRILL - "T"-handle, No.2 morse taper, 750rpm, reversible, 14mm drilling, 12mm reaming, 12mm tapping
DRILL - D-handle, 13mm keyed chuck, 1000rpm
DRILL - D-handle, 19mm keyed chuck, 500rpm
DRILL - D-handle, 19mm, keyed metal chuck, 1000rpm
DRILL - floor, tee handle, 10mm keyed chuck, steel body, side exhaust, 2500rpm
DRILL - floor, tee handle, 13mm keyed chuck, steel body, side exhaust, 1750rpm
DRILL - floor, tee handle, 19mm keyed chuck, steel body, side exhaust, 1500rpm
DRILL - pistol grip, 10mm, aluminium body, metal keyed chuck, 1800rpm
DRILL - pistol grip, 10mm, composite body, metal keyed chuck, 2000rpm
DRILL - pistol grip, 10mm, composite body, metal keyed chuck, reversible, 1800rpm
DRILL - pistol grip, 10mm, keyed metal chuck, 2600rpm
DRILL - pistol grip, 10mm, keyed metal chuck, heavy duty, 2000rpm
DRILL - pistol grip, 10mm, reversible, 2000rpm
DRILL - pistol grip, 10mm, reversible, polymer body, plastic keyless chuck
DRILL - pistol grip, 10mm, reversible, polymer body, plastic keyless chuck, 1500rpm
DRILL - pistol grip, 10mm, reversible, rubber grip handle
DRILL - pistol grip, 13mm, 600rpm
DRILL - pistol grip, 13mm, aluminium body, metal keyed chuck, 800rpm
DRILL - pistol grip, 13mm, composite body, metal keyed chuck, reversible, 500rpm
DRILL - pistol grip, 13mm, composite body, metal keyed chuck, reversible, 800rpm
DRILL - pistol grip, 13mm, reversible, 800rpm
DRILL - pistol grip, 13mm, reversible, polymer body, plastic keyless chuck, 600rpm
DRILL - pistol grip, 6mm, keyed metal chuck, 5000rpm
DRILL - pistol grip, 8mm, rubber grip handle, 2400rpm
DRILL - pistol, 6mm, compact, keyed metal chuck, 1600rpm
DRILL - right angle head, 10mm, metal keyed chuck, 1200rpm
DRILL - right angle, 10mm keyed chuck,steel body, rear exh. 2000rpm
DRILL - right angle, 10mm, aluminium body, metal keyed chuck, 1800rpm
DRILL - right angle, 13mm keyed chuck, steel body, rear exh, 1200rpm
DRILL - straight grip, 10mm keyed chuck, steel body, rear exhaust, 2500rpm
DRILL - straight grip, 10mm, polymer body cover, plastic keyless chuck, 2600rpm
DRILL - straight grip, 13mm keyed chuck, steel body, rear exhaust, 900rpm
DRILL - straight grip, 6mm, polymer body cover, metal keyed chuck, 6000rpm
DRILL CHUCK - keyed, metal, 10mm, heavy duty
DRILL CHUCK - keyed, metal, 10mm, light duty
DRILL CHUCK - keyed, metal, 13mm, light duty
DRILL CHUCK - keyless, metal, 10mm, heavy duty
DRILL CHUCK - keyless, metal, 12mm, heavy duty
DRILL CHUCK - keyless, metal, 6mm, heavy duty
DRILL CHUCK - keyless, plastic, 10mm
DRILL CHUCK - keyless, plastic, 12mm
DRIP LEG DRAIN - 1/2"FBSP, auto drain, zinc alloy body
ENGRAVING PEN - percussion, hardened stylus tip
ERASER WHEEL - standard, 5/16"-24 male thread
ERASER WHEEL - toothed, 5/16"-24 male thread
FALL ARRESTOR - for VL203 & VL223
FALL ARRESTOR - for VL303
FILE - round, for reciprocation saw/file
FILE - square, for reciprocation saw/file
FILE - triangular, for reciprocation saw/file
FILE/SANDER - straight line, 2500spm, twin piston, 67 x 400mm pad
FILTER - "Excelon" modular system, 1/2"FBSP, auto drain
FILTER - "Excelon" modular system, 1/4"FBSP, manual drain
FILTER - "Excelon" modular system, 3/4"FBSP, auto drain
Specifications subject to change without notice. E&OE. ©
BRAND
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
APT
IAT
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
PNEUTECH
PNEUTECH
TOP CAT
TOP CAT
IAT
TOP CAT
TOP CAT
TOP CAT
ALLIANCE
ALLIANCE
ALLIANCE
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
ALLIANCE
ALLIANCE
ALLIANCE
SHINANO
SHINANO
SHINANO
SHINANO
IAT
SHINANO
TOP CAT
ALLIANCE
TOP CAT
TOP CAT
ALLIANCE
TOP CAT
SHINANO
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
NORGREN
ALLIANCE
ALLIANCE
ALLIANCE
TRELAWNY
TRELAWNY
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
NORGREN
NORGREN
NORGREN
PART NUMBER
340.163
340.166
426.5352
426.5351
606.5303
159.5925
340.55
612.5301
340.581
340.167
437.011
APT-125
IAT-7515
AA-P7712-A4
AA-RS1
AA-P7712-A2
AA-RS2
AA-RS3
AA-P7712-A1
AA-C1330-36
AA-P7712-A3
AA-205DK
AA-305DK
*
*
*
*
*
*
AA-809
PT-835
PT-875
500D2M;1000;1/2
507D2M;500;3/4
IAT-1568
400FD8MK;2500;3/8
507FD1MK;1750;1/2
520FD1MK;1500;3/4
AL-1203
AL-1205
AL-1206
SI-5500
SI-5300A
SI-5305A
SI-5505
SI-5405
SI-5506
SI-5200A
AL-1204
AL-1207
AL-1208
SI-5305-8A
SI-5405-6
SI-5100A
SI-5501
IAT-1539
SI-5355
400DRA5MKSR;2000;3/8
AL-1202
400DRA8MKSR;1200;1/2
400D8MKSR;2500;3/8
AL-1200
400D21MKSR;900;1/2
SI-2015AD
AA-RC3838H
AA-RC3838L
AA-RC1238
AA-KP3838M
AA-KP1238M
AA-KP1438M
AA-KL3838
AA-KL1238
17-816-998
AL-2480
406ES
406ET
720.2003
720.3003
AA-506P-56R
AA-506P-56S
AA-506P-56T
AL-1512
F74G-4GN-AD3
F72G-2GN-QW3
F74G-6GN-AD3
PG.
I-42
I-42
I-36
I-36
I-36
I-35
I-42
I-36
I-42
I-42
I-36
K-5
C-17
L-7
L-6
L-7
L-6
L-6
L-7
L-6
L-7
L-5
L-5
L-4
L-4
L-3
L-4
L-5
L-5
L-17
R-8
R-8
E-5
E-5
C-3
E-3
E-4
E-4
A-4
A-5
A-5
D-3
D-3
D-4
D-4
D-4
D-4
D-4
A-4
A-5
A-5
D-5
D-5
D-3
D-4
C-3
D-3
E-5
A-4
E-5
E-3
A-4
E-3
D-3
L-19
L-19
L-19
L-20
L-20
L-20
L-19
L-19
Q-13
A-6
L-25
L-25
I-26
I-26
L-20
L-20
L-20
A-21
Q-7
Q-5
Q-8
PRODUCT DESCRIPTION INDEX
BRAND
NORGREN
NORGREN
ALLIANCE
MOTOR GUARD
MOTOR GUARD
NORGREN
NORGREN
NORGREN
NORGREN
NORGREN
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
MOTOR GUARD
PNEUTECH
PNEUTECH
TOP CAT
TOP CAT
ALLIANCE
ALLIANCE
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
PART NUMBER
F73G-3GN-QD3
F68G-8GN-AR3
AA-5009
D12-1
D12-2
B74G-4GK-AD3-RMG
B74G-6GK-AD3-RMG
B73G-3GK-QD3-RMG
B72G-2GK-QW3-RMG
B68G-8GK-AR3-RLG
AL-2000
AL-1000
AL-2010
AL-1010
M-723
TP-2FL
TP-3FL
520H1MKS1;3000
400GH8MKSRS1;2500
AA-810
AA-811
345.2004D
345.2006D
345.2000D
350.2004D
350.2006D
350.2000B
350.5509
350.5505
350.5507
350.9142
350.5610RA
350.5620RA
350.5610R
350.5620R
350.5502
350.5525
320.3658
350.9135
350.5519
320.2004
320.2006
320.2
320.2012
325.2006
325.2
320.002
320.55
320.512
320.961
320.1020ST
320.1020SS
320.1020SM
320.002H
320.002G
320.565
320.56
320.414
320.3658
320.962
320.565
325.001
320.55
320.512
325.1010SS
325.1010GT
325.00CD
325.1010SB
320.1010DM
325.1020ST
325.00DW
325.1010DB
325.1010DS
320.1010DT
320.56
320.414
320.3658
320.1020SB
*
159.6
159.6
159.505
612.0125
612.012
426.5355
426.5358
PG.
Q-6
Q-12
L-21
L-26
L-26
Q-7
Q-8
Q-6
Q-5
Q-11
Q-4
Q-3
Q-4
Q-3
Q-15
Q-17
Q-17
E-20
E-20
L-17
L-17
I-3
I-3
I-3
I-4
I-4
I-4
I-5
I-5
I-5
I-5
I-5
I-5
I-5
I-5
I-5
I-5
I-5
I-5
I-5
I-11
I-12
I-11
I-12
I-12
I-12
I-14
I-14
I-14
I-14
I-14
I-14
I-14
I-14
I-14
I-14
I-14
I-14
I-14
I-14
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-15
I-14
I-13
I-20
I-37
I-37
I-38
I-38
I-38
I-38
Specifications subject to change without notice. E&OE. ©
5
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION
FILTER - "Excelon" modular system, 3/8"FBSP, manual drain
FILTER - "Olympian Plus" plug-in system, 1"FBSP, auto drain
FILTER - in-line, 1/4"BSP
FILTER - spray gun, in-line, disposable, plastic, 1/4" BSP, single pack,
FILTER - spray gun, in-line, disposable, plastic, 1/4" BSP, twin pack,
FILTER / REGULATOR - "Excelon" modular system, 1/2"FBSP, auto drain
FILTER / REGULATOR - "Excelon" modular system, 3/4"FBSP, auto drain
FILTER / REGULATOR - "Excelon" modular system, 3/8"FBSP, manual drain
FILTER / REGULATOR - "Excelon" modular systen, 1/4"FBSP, manual drain
FILTER / REGULATOR - "Olympian Plus" plug-in system, 1"FBSP, auto drain
FILTER / REGULATOR - 1/2"FBSP, semi automatic condensate drain
FILTER / REGULATOR - 1/4"FBSP, semi autoatic condensate drain
FILTER / REGULATOR + LUBRICATOR - 1/2"FBSP, semi automatic condensate drain
FILTER / REGULATOR + LUBRICATOR - 1/4"FBSP, semi automatic condensate drain
FILTER ELEMENT - for M-30 & M-60 sub-micronic canister filters
FILTER/LUBRICATOR - in-line, 1/2"BSP, 40micron, 42ml oil capacity
FILTER/LUBRICATOR - in-line, 3/4"BSP, 40micron, 111ml oil capacity
FINISHER/POLISHER - horizontal, 200mm, alum. body, side exhaust, 1500W, 3000rpm
FINISHER/POLISHER - horizontal, 200mm, steel body, rear exhaust, 900W, 2500rpm
FLAT CHISEL - 10.2mm round shank, 176mm x 19mm wide
FLAT CHISEL - 10.2mm round shank, 229mm x 19mm wide
FLOOR GRINDER - single head, 240V electric, 2.2kW, 250mm cuttting width
FLOOR GRINDER - single head, 415V electric, 2.2kW, 250mm cutting width
FLOOR GRINDER - single head, petrol engine, 4.1kW, 250mm grinding width
FLOOR GRINDER - twin head, 240V electric, 2.2kW, 590mm cutting width
FLOOR GRINDER - twin head, 415V electric, 5.5kW, 590mm cutting width
FLOOR GRINDER - twin head, petrol engine, 8.2kW, 590mm cutting width
FLOOR GRINDER ACCESSORIES - Abrasive block, coarse, 24grit
FLOOR GRINDER ACCESSORIES - Abrasive block, fine, 120 grit
FLOOR GRINDER ACCESSORIES - Abrasive block, medium, 60 grit
FLOOR GRINDER ACCESSORIES - Diamond plate adaptor kit
FLOOR GRINDER ACCESSORIES - Diamond plate, blue, hard bond, 10 segment, 250mm dia.
FLOOR GRINDER ACCESSORIES - Diamond plate, blue, hard bond, 20 segment 250mm dia.
FLOOR GRINDER ACCESSORIES - Diamond plate, red, soft bond, 10 segment, 250mm dia.
FLOOR GRINDER ACCESSORIES - Diamond plate, red, soft bond, 20 segment, 250mm dia.
FLOOR GRINDER ACCESSORIES - Hardwood wedge
FLOOR GRINDER ACCESSORIES - Scarifying block insert
FLOOR GRINDER ACCESSORIES - Star cutter, 14 per set
FLOOR GRINDER ACCESSORIES - Weight
FLOOR GRINDER ACCESSORIES - Wire brush insert
FLOOR PLANER - 200mm cutting width, 240V electric motor
FLOOR PLANER - 200mm cutting width, 415V electric motor
FLOOR PLANER - 200mm cutting width, petrol motor
FLOOR PLANER - 200mm cutting width, pneumatic motor
FLOOR PLANER - 250mm cutting width, 415V electric motor
FLOOR PLANER - 250mm cutting width, petrol motor
FLOOR PLANER ACCESSORIES - 200mm, 12mm Cutter Shaft
FLOOR PLANER ACCESSORIES - 200mm, 5 Point TCT Cutter
FLOOR PLANER ACCESSORIES - 200mm, Beam Cutter – 43mm diameter
FLOOR PLANER ACCESSORIES - 200mm, Crimped wire brush assembly
FLOOR PLANER ACCESSORIES - 200mm, Drum Assembly - TCT Cutters
FLOOR PLANER ACCESSORIES - 200mm, Drum Assembly - star cutters
FLOOR PLANER ACCESSORIES - 200mm, Drum Assembly – milling cutters
FLOOR PLANER ACCESSORIES - 200mm, Heavy duty drum
FLOOR PLANER ACCESSORIES - 200mm, Long life drum
FLOOR PLANER ACCESSORIES - 200mm, Milling Cutter – 11mm wide
FLOOR PLANER ACCESSORIES - 200mm, Milling Cutter – 22mm wide
FLOOR PLANER ACCESSORIES - 200mm, Spacing washer
FLOOR PLANER ACCESSORIES - 200mm, Star Cutter – 43mm diameter
FLOOR PLANER ACCESSORIES - 200mm, Twist knot wire brush assembly
FLOOR PLANER ACCESSORIES - 250mm, 1/2 Size Milling Cutter
FLOOR PLANER ACCESSORIES - 250mm, 12mm Cutter Shaft
FLOOR PLANER ACCESSORIES - 250mm, 5 Point TCT Cutter
FLOOR PLANER ACCESSORIES - 250mm, Beam Cutter
FLOOR PLANER ACCESSORIES - 250mm, Drum Assembly - Star Cutters
FLOOR PLANER ACCESSORIES - 250mm, Grooving Drum Assembly - TCT Cutters
FLOOR PLANER ACCESSORIES - 250mm, Heavy Duty Drum
FLOOR PLANER ACCESSORIES - 250mm, Heavy Duty Drum Assembly - Beam Cutter
FLOOR PLANER ACCESSORIES - 250mm, Heavy Duty Drum Assembly - Milling Cutter
FLOOR PLANER ACCESSORIES - 250mm, Heavy Duty Drum Assembly - TCT Cutters
FLOOR PLANER ACCESSORIES - 250mm, Long Life Drum
FLOOR PLANER ACCESSORIES - 250mm, Long Life Drum Assembly - Beam Cutter
FLOOR PLANER ACCESSORIES - 250mm, Long Life Drum Assembly - Star Cutters
FLOOR PLANER ACCESSORIES - 250mm, Long Life Drum Assembly - TCT Cutters
FLOOR PLANER ACCESSORIES - 250mm, Milling Cutter
FLOOR PLANER ACCESSORIES - 250mm, Spacing Washer
FLOOR PLANER ACCESSORIES - 250mm, Star Cutter
FLOOR PLANER ACCESSORIES- 200mm, Drum Assembly - beam cutter
FLOOR PLANER PRODUCTION RATES - table
FLOOR SCABBLER - low vibration, 11-head
FLOOR SCABBLER - Model MHS11, 11 heads, low vibration, 11 x 2200bpm
FLOOR SCABBLER - Model MHS5, 5 heads, low vibration, 5 x 1200bpm
FLOOR SCABBLER ACCESSORIES - One piece piston with tungsten carbide tipped bush hammer head for MHS11
FLOOR SCABBLER ACCESSORIES - Piston to fi t replaceable heads for MHS11
FLOOR SCABBLER ACCESSORIES - Replaceable tungsten carbide tipped bush hammer head for MHS11
FLOOR SCABBLER ACCESSORIES - Replaceable tungsten carbide tipped cruciform head for MHS11
W-5
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION INDEX
6
W-6
PRODUCT DESCRIPTION
FLOOR SCABBLER ACCESSORIES - Scabbler head, 5 point bush hammer head for MHS5
FLOOR SCABBLER ACCESSORIES - Scabbler head, 9 point bush hammer head for MHS5
FLOOR SCABBLER ACCESSORIES - Vacuum skirt and hose MHS11
FORK CHISEL - 10.2mm round shank, 155mm x 32mm wide
FORK CHISEL - 10.2mm round shank, 174mm x 41mm wide
GINDRER - die, 1/4" collet+, aluminium body, side exhaust, 675W, 22000rpm
GREASE GUN KIT - takes 500cc cartridges, includes manual gun
GRINDER - angle, 100mm, 16CH, polymer body cover, 10000rpm
GRINDER - angle, 100mm, 16CH, steel body, rear exhaust, 900W, 10000rpm
GRINDER - angle, 100mm, 16mm CH, 11000rpm
GRINDER - angle, 100mm, 16mm CH, compact, 12000rpm
GRINDER - angle, 125mm, 22CH, polymer body cover, 10000rpm
GRINDER - angle, 125mm, 22CH, steel body, rear exhaust, 900W, 10000rpm
GRINDER - angle, 125mm, 22mm CH, 10000rpm
GRINDER - angle, 125mm, 22mm CH, polymer body cover, 10000rpm
GRINDER - angle, 180mm, 22CH, alum. body, side exhaust, 1500W, 8000rpm
GRINDER - angle, 180mm, 22mm CH, 7000rpm
GRINDER - angle, 230mm, 22CH, alum. body, side exhaust, 1500W, 6000rpm
GRINDER - angle, heavy duty, 100mm, 16CH, 13600rpm
GRINDER - angle, heavy duty, 125mm, 22CH, 10900rpm
GRINDER - angle, heavy duty, 180mm, 22CH, 7600rpm
GRINDER - angle, heavy duty, 230mm, 22CH, 5900rpm
GRINDER - angle, heavy duty, turbine motor, 125mm, 22CH, 12000rpm
GRINDER - angle, wet, 125mm, 22CH, polymer body cover, 10000rpm
GRINDER - bench, 235mm, 5/8'Whit., high speed, steel frame, alum. mtr., 3000W, 6000rpm
GRINDER - bench, 235mm, 5/8"Whit., low speed, steel frame, alum. mtr., 3000W, 3300rpm
GRINDER - cone wheel, 40mm, 3/8"UNF, al/steel body, rear exhaust, 900W, 20000rpm
GRINDER - cone wheel, 50mm, 5/8"Whit., al/steel body, side exhaust, 1119W, 18000rpm
GRINDER - cone wheel, 63mm, 1/2" UNC, al/steel body, side exhaust, 1500W, 12000rpm
GRINDER - die, right angle, mini, 1/4" collet, polymer body cover, 22000rpm
GRINDER - die, 1/4" collet, aluminium body, front exhaust, 300W, 25000rpm
GRINDER - die, 1/4" collet+, steel body, rear exh., double front bearing, 900W, 20000rpm
GRINDER - die, 1/4" collet+, steel body, rear exh., triple front bearing, 900W, 20000rpm
GRINDER - die, 1/4" collet+, steel body, rear exhaust, 900W, 20000rpm
GRINDER - die, 330mm extn., 1/4" collet+, steel body, rear exh., 900W, 20000rpm
GRINDER - die, angle, mini, 1/8" & 3mm collet, 45000rpm
GRINDER - die, compact, 1/4" collet, 25000rpm
GRINDER - die, compact, 1/4" collet, polymer body cover, 25000rpm
GRINDER - die, extended, 1/4" collet, 20000rpm
GRINDER - die, extended, 1/4" collet, polymer body cover, 20000rpm
GRINDER - die, extended, 1/4" collet+, steel body, rear exh., 900W, 20000rpm
GRINDER - die, extended, 1/4" collet+, steel body, side exhaust, 675W, 20000rpm
GRINDER - die, lock-on throttle, oil free, composite body, 1/4" collet, 25000rpm
GRINDER - die, medium, 1/4" collet, 22000rpm
GRINDER - die, medium, 1/4" collet, polymer body cover, 22000rpm
GRINDER - die, medium, 1/4" collet, polymer body cover, 23000, Kit
GRINDER - die, medium, 1/4" collet, polymer body cover, 23000rpm
GRINDER - die, medium, 1/4" collet, polymer body cover, extender shaft, 25000rpm
GRINDER - die, mini, 1/4" collet, polymer body cover, 25000rpm
GRINDER - die, mini, 1/4" collet, polymer body cover, 25000rpm, Kit
GRINDER - die, reversible, oil free, composite body, 1/4" collet, 2500rpm
GRINDER - die, right angle, 1/4" collet, 18000rpm
GRINDER - die, right angle, 1/4" collet, polymer body cover, 18000rpm
GRINDER - die, right angle, 1/4" collet+, steel body, rear exhaust, 900W, 13000rpm
GRINDER - die, right angle, high speed, 1/4" collet, alum. body, front exh., 300W, 20000rpm
GRINDER - die, right angle, low speed, 1/4" collet, alum. body, front exh., 300W, 12000rpm
GRINDER - die, right angle, medium, 1/4" collet, polymer body cover, 18000rpm
GRINDER - fan, 1/4" collet, polymer body cover, 5500rpm
GRINDER - fan, extended, 1/4" collet, 6000rpm
GRINDER - horizontal, 100mm, 5/8"Whit., al/steel body, side exhaust, 1500W, 9000rpm
GRINDER - horizontal, 100mm, 5/8"Whit., alum. body, side exhaust, 2250W, 9000rpm
GRINDER - horizontal, 150mm, 5/8"Whit., alum. body, side exhaust, 2250W, 6000rpm
GRINDER - horizontal, 200mm, 5/8"Whit., alum. body, side exhaust, 3000W, 4000rpm
GRINDER - horizontal, 50mm, 3/8"UNF, alum. body, side exhaust, 675W, 18000rpm
GRINDER - horizontal, 80mm, 3/8"UNF, steel body, rear exhaust, 900W, 15000rpm
GRINDER - horizontal, roll throttle, 75mm, 12000rpm
GRINDER - horizontal, safety lever throttle, 75mm, 12000rpm
GRINDER - pencil, micro, 1/8" collet, 60000rpm
GRINDER - pencil, roll throttle, polymer body cover, 1/8" & 3mm collets, 55000rpm
GRINDER - right angle, mini, 30mm wheel, 25000rpm
GRINDER - vertical, 180mm, 5/8"Whit., alum. body, side exhaust, 1500W, 8000rpm
GRINDER - vertical, 180mm, 5/8"Whit., alum. body, side exhaust, 2250W, 8000rpm
GRINDER - vertical, 230mm, 5/8"Whit., alum. body, side exhaust, 3000W, 6000rpm
GRINDER - vertical, heavy duty, 230mm, 22CH, 6000rpm
GRINDER, - horizontal, 150mm, 5/8"Whit., alum. body, side exhaust, 3000W, 6000rpm
GRINDER/SANDER - angle, medium, 75mm, polymer body cover, 18000rpm, Kit
GRINDER/SANDER - angle, mini, 50mm, polymer body cover, 15000rpm
GRINDER/SANDER - angle, mini, 50mm, polymer body cover, 22000rpm, Kit
HAMMER - air, pistol grip, 10.2mm shank, 4500bpm
HAMMER - bump, palm grip, push to start, 1000bpm
HAMMER - pistol grip, 10.2mm shank, 3000bpm
HAMMER - pistol grip, heavy duty, 10.2mm shank, 2000bpm, Kit with 5 chisels and retainer spring
HAMMER - pistol grip, medium stroke, 10.2mm shank, 2600bpm
HAND GRIP - for hand sanding, hook & loop face, takes 80 x 100mm sheets
HOLD CLEANER - Hydraflex, stainless steel, adjustable air pressure control, water cons. 454L/min, effective reach 30m
Specifications subject to change without notice. E&OE. ©
BRAND
TRELAWNY
TRELAWNY
TRELAWNY
ALLIANCE
ALLIANCE
TOP CAT
IAT
ALLIANCE
TOP CAT
SHINANO
SHINANO
ALLIANCE
TOP CAT
SHINANO
SHINANO
TOP CAT
SHINANO
TOP CAT
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
SHINANO
TOP CAT
TOP CAT
TOP CAT
TOP CAT
TOP CAT
ALLIANCE
TOP CAT
TOP CAT
TOP CAT
TOP CAT
TOP CAT
IAT
SHINANO
SHINANO
SHINANO
ALLIANCE
TOP CAT
TOP CAT
IAT
SHINANO
SHINANO
ALLIANCE
ALLIANCE
SHINANO
ALLIANCE
ALLIANCE
IAT
SHINANO
SHINANO
TOP CAT
TOP CAT
TOP CAT
ALLIANCE
SHINANO
SHINANO
TOP CAT
TOP CAT
TOP CAT
TOP CAT
TOP CAT
TOP CAT
IAT
IAT
ALLIANCE
SHINANO
SHINANO
TOP CAT
TOP CAT
TOP CAT
ALLIANCE
TOP CAT
ALLIANCE
ALLIANCE
ALLIANCE
IAT
ALLIANCE
ALLIANCE
ALLIANCE
SHINANO
ALLIANCE
TRELAWNY
PART NUMBER
426.5051
426.5369
437.012
AA-803
AA-803J
40AGKS;22000;1/4
IAT-6039K
AL-1331
400RA4KSR;10000;427
SI-2500L
SI-2501L
AL-1335
400RAE2KSR;10000;527
SI-2505L
SI-2515LA
520RA2XKTKW;8000;727
SI-2600L
520RA2XKTKW;6000;927
AL-1344
AL-1345
AL-1347
AL-1349
AL-1355
SI-2515LA-W
66VBG;6000;9
662VBG;3300;9
400GH1KSR;20000;3/3-24
511HKS;18000;5/8-11
5201HKCW;12000;1/2-13
AL-1312
GC25K
400HGEKSR;20000;1/4
400SHKSR;20000;1/4
400GEKSR;20000;1/4
400EHKSRD+13;20000;1/4
IAT-2012
SI-2001S
SI-2002
SI-2022S
AL-1321
400GHDKSR;20000;1/4
4002AGHKS;20000;1/4
IAT-2025S
SI-2011S
SI-2012
AL-1320K
AL-1320
SI-2010
AL-1310
AL-1310K
IAT-2025SN
SI-2006S
SI-2005
410RAEDKSR;13000;1/4
GR20K
GR12K
AL-1322
SI-2015A
SI-2023
5201HKS;9000;401
56HK;9000;401
56HK;6000;601
65HK;4000;801
40GHK;301
407GH4KSR;15000;401
IAT-2280R
IAT-2280L
AL-1300
SI-2051-SG
SI-2050AG
520VXK;8000;727
54VK;8000;727
64VK;6000;927
AL-1359
65HK;6000;601
AL-1322K
AL-1330
AL-1312K
IAT-2511
AL-2450
AL-4200
AL-4202K
SI-4120AK
32A
342.HY50
PG.
I-38
I-38
I-38
L-16
L-16
E-6
C-19
A-6
E-15
D-7
D-7
A-6
E-15
D-8
D-8
E-15
D-8
E-15
A-7
A-7
A-7
A-7
A-8
D-8
E-13
E-13
E-9
E-10
E-10
A-9
E-6
E-6
E-7
E-6
E-8
C-4
D-5
D-5
D-6
A-10
E-7
E-7
C-4
D-6
D-6
A-9
A-9
D-5
A-9
A-9
C-4
D-6
D-6
E-9
E-8
E-8
A-10
D-6
D-7
E-11
E-11
E-12
E-12
E-11
E-11
C-4
C-4
A-8
D-5
D-7
E-14
E-14
E-14
A-8
E-12
A-10
A-6
A-9
C-5
A-10
A-11
A-11
D-9
A-23
I-43
PRODUCT DESCRIPTION INDEX
BRAND
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ROTABROACH
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
SHINANO
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
PART NUMBER
APTM118
APTM116
APTM117
APTM3048
APTM1010A
*
APTCQ01
APTCQ03
APTCQ02
RAPK2000
*
*
*
*
*
*
APTL001
APTL205
APTL005
APTB001
APTB005
APTP001
APTM328
*
APTM464
APTM427
MCIK02
MCIK01
MCMK02
MCMK01
*
*
*
*
*
APTM327
APTM3063
APTSRA25
APTSRA50
APTRA3092
*
*
*
APTPC100
APTPC201
APTPT100
APTPT201
RD2311
APTM329
*
APTS1600
APTS0168
CT/010/100
*
*
*
DB121
APTM3008
CM/705/3A
CM/200/3A
RD130C
RD140
CM/8003A
SMART PANTHER 3
SMART PUMA 3
RD074
CM/500/3A
CM/405/3A
*
*
*
*
*
AH-1015R
*
*
*
*
*
SI-1301
*
A75216
*
A78117
*
*
PG.
H-11
H-11
H-11
H-11
H-11
H-12
H-13
H-13
H-13
H-10
H-7
H-7
H-8
H-8
H-9
H-9
H-14
H-14
H-14
H-14
H-14
H-14
H-11
H-13
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-11
H-13
H-11
H-11
H-8
H-8
H-9
H-7
H-7
H-9
H-12
H-12
H-12
H-12
H-14
H-11
H-10
H-14
H-14
H-14
H-13
H-12
H-12
H-10
H-11
H-5
H-4
H-5
H-5
H-3
H-3
H-3
H-6
H-4
H-4
P-3
P-5
P-3
P-4
P-15
P-5
P-7
P-7
P-5
P-6
P-6
D-11
L-12
L-12
L-9
L-13
L-10
L-9
Specifications subject to change without notice. E&OE. ©
7
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION
HOLE CUTTER ACCESSORIES - Arbor for Mini Cutters over 21mm dia to suit ½”chuck
HOLE CUTTER ACCESSORIES - Arbor for Mini Cutters to suit ½” drill chuck
HOLE CUTTER ACCESSORIES - Arbor for Mini Cutters to suit 3/8” drill chuck
HOLE CUTTER ACCESSORIES - Body for Arbor APTM116
HOLE CUTTER ACCESSORIES - Body for Arbor APTM117
HOLE CUTTER ACCESSORIES - Countersink bit, for holes to 30, 40 & 55mm dia, HSS, 90°
HOLE CUTTER ACCESSORIES - Cutter Adaptor, Fein Quick-in Shank
HOLE CUTTER ACCESSORIES - Cutter Adaptor, Nitto Threaded Adaptor
HOLE CUTTER ACCESSORIES - Cutter Adaptor, One-touch Shank
HOLE CUTTER ACCESSORIES - CUTTER KIT - incl 14, 16, 18, 20 & 22mm dia Raptor HSS cutters + 2 pilot pins
HOLE CUTTER ACCESSORIES - CUTTERS - M2 High Speed Steel, fully ground, 11 to 52mm dia x 25mm cutting depth
HOLE CUTTER ACCESSORIES - CUTTERS - M2 High Speed Steel, fully ground, 12 dia to 65mm dia x 50mm cutting depth
HOLE CUTTER ACCESSORIES - CUTTERS - M42 High Speed Steel, fully ground, 13 dia x 50mm cutting depth
HOLE CUTTER ACCESSORIES - CUTTERS - M42 High Speed Steel, fully ground, 13 to 40mm dia x 25mm cutting depth
HOLE CUTTER ACCESSORIES - CUTTERS - Tungsten Carbide Tipped, 14 to 52mm dia x 35mm cutting depth
HOLE CUTTER ACCESSORIES - CUTTERS - Tungsten Carbide Tipped, 15 to 65mm dia x 110 cutting depth
HOLE CUTTER ACCESSORIES - Cutting Fluid, 1 litre plastic bottle
HOLE CUTTER ACCESSORIES - Cutting Fluid, 205 litre steel drum
HOLE CUTTER ACCESSORIES - Cutting Fluid, 5 litre plastic jerry can
HOLE CUTTER ACCESSORIES - Cutting Oil, bio-degradable, 1 litre plastic bottle
HOLE CUTTER ACCESSORIES - Cutting Oil, bio-degradable, 5 litre plastic jerry can
HOLE CUTTER ACCESSORIES - Cutting Paste - Can
HOLE CUTTER ACCESSORIES - Dished Stop Washer for Mini Cutters
HOLE CUTTER ACCESSORIES - Extension Arbors - 25 to 250mm long, 19.05mm(3/4") shank fi ttings
HOLE CUTTER ACCESSORIES - Grub Screw for Mini Cutter arbors
HOLE CUTTER ACCESSORIES - Hex. Wrench 1/8” A/F for arbor grub screw
HOLE CUTTER ACCESSORIES - MINI CUTTER KIT - incl. 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" + 1/2" chuck arbor
HOLE CUTTER ACCESSORIES - MINI CUTTER KIT - incl. 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" + 3/8" chuck arbor
HOLE CUTTER ACCESSORIES - MINI CUTTER KIT - incl. 8, 10, 12, 14, 16, 18, 20mm cutters + 1/2" chuck arbor
HOLE CUTTER ACCESSORIES - MINI CUTTER KIT - incl. 8, 10, 12, 14, 16, 18, 20mm cutters + 3/8" chuck arbor
HOLE CUTTER ACCESSORIES - MINI CUTTERS - 6 to 20mm dia for materials up to 8mm thick, fi t 3/8" & 1/2" drill chucks
HOLE CUTTER ACCESSORIES - MINI CUTTERS - 1/4" to 3/4"dia for materials up to 1/4" thick, fi ts 3/8" & 1/2" drill chucks
HOLE CUTTER ACCESSORIES - MINI CUTTERS - 13/16" to 1-1/2"dia for materials up to 1/2" thick, fi ts 1/2" drill chucks
HOLE CUTTER ACCESSORIES - MINI CUTTERS - 21 to 25mm dia for materials up to 12mm thick, fi ts 1/2" drill chucks
HOLE CUTTER ACCESSORIES - Morse Taper Adaptors, 2MT to 5MT, 19.05mm or 32mm shanks, 50, 75 & 100mm DOC
HOLE CUTTER ACCESSORIES - Pilot Pin for APTM116 & APTM117 arbors
HOLE CUTTER ACCESSORIES - Pilot Pin for APTM118 arbor
HOLE CUTTER ACCESSORIES - Pilot Pin for M42 cutters with 25mm cutting depth
HOLE CUTTER ACCESSORIES - Pilot Pin for M42 cutters with 50mm cutting depth
HOLE CUTTER ACCESSORIES - Pilot Pin for Tungsten Carbide Tipped cutters with 110mm cutting depth
HOLE CUTTER ACCESSORIES - Pilot Pins for M2 cutters with 25mm cutting depth
HOLE CUTTER ACCESSORIES - Pilot Pins for M2 cutters with 50mm cutting depth
HOLE CUTTER ACCESSORIES - Pilot Pins for Tungsten Carbide Tipped cutters with 35mm cutting depth
HOLE CUTTER ACCESSORIES - Piloted Countersink Kit, pilot pins for 14,18,22mm holes, cks holes to 40mm dia
HOLE CUTTER ACCESSORIES - Piloted Countersink with hole for pilot pin, cks holes to 40mm dia, HSS, 90°
HOLE CUTTER ACCESSORIES - Piloted TCT Countersink Kit, pins for 14,18,22mm holes, cks holes to 40mm dia
HOLE CUTTER ACCESSORIES - Piloted TCT Countersink, hole for pilot pin, cks holes to 40mm dia, HSS, 90°
HOLE CUTTER ACCESSORIES - Pipe Adaptor Kit
HOLE CUTTER ACCESSORIES - Plain Stop Washer for Mini Cutters
HOLE CUTTER ACCESSORIES - RAIL CUTTERS - 18 to 36mm dia x 25mm cutting depth
HOLE CUTTER ACCESSORIES - Stick Lubricant 16 ounces
HOLE CUTTER ACCESSORIES - Stick Lubricant, 1.68 ounces
HOLE CUTTER ACCESSORIES - Swarf Stick, magnetic
HOLE CUTTER ACCESSORIES - Twist Drill Adaptors, 4 to 12mm drills
HOLE CUTTER ACCESSORIES - TWIST DRILLS - M2 HHS, 4 to 12mm dia, Weldon Shank
HOLE CUTTER ACCESSORIES - TWIST DRILLS - M42 HHS, 4 to 13.5mm dia, Weldon Shank
HOLE CUTTER ACCESSORIES - Vacuum Pad, for drilling non-ferrous materials, 368kg holding force, 4cfm, 70psi
HOLE CUTTER ACCESSORIRS - Compression Spring for Mini Cutter arbours
HOLE CUTTING MACHINE - ADDER, 240V elec, mag base, right angle, 35dia x 25deep, 210mm high, 650rpm
HOLE CUTTING MACHINE - COBRA, 240V elec, mag base, vertical, 65dia x 50deep, var. speed, 160 - 640rpm
HOLE CUTTING MACHINE - EAGLE, pneumatic, mag base, vertical, 52dia x 50deep, spark resistant body, 160rpm
HOLE CUTTING MACHINE - GATOR, hydraulic, magnetic base, vertical, 52dia x 50deep, 630rpm
HOLE CUTTING MACHINE - LYNX, 240V electric, mag base, vertical, 35dia x 45deep, semi automatic, 620rpm
HOLE CUTTING MACHINE - PANTHER, 240V elec, mag base, vertical, 40dia x 50deep, "Cutsmart", 350 - 600rpm
HOLE CUTTING MACHINE - PUMA, 240V electric, magnetic base, vertical, 30dia x 50deep, "Cutsmart", 600rpm
HOLE CUTTING MACHINE - RAIL, 4 stroke petrol, 18.5kg, automatic feed, 36dia capacity
HOLE CUTTING MACHINE - SCORPION, 240V elec, mag base, vertical, 100dia x 100deep, var. speed, 40 - 600rpm
HOLE CUTTING MACNINE - FALCON, 240V electric, mag base, vertical, 50dia x 50deep, for tapping, 250/450rpm
HOSE - reinforced PVC, 20bar(290psi), 10, 12, 19, 25mm I.D., 10, 20, 30, 100m coil lengths
HOSE ASSEMBLIES - braided PU, coiled, 15bar(213psi), 6.5 & 10mm I.D. x 4.5 & 7.5m working lengths, 1/4"BSP male ends
HOSE ASSEMBLIES - reinforced PVC, 20bar(290psi), 10, 20, 30, 100m coil lengths, quick couplers fi tted each end
HOSE ASSEMBLIES - rubber, construction duty, 13.8bar(200psi), 20 & 25mm I.D., 20m lengths, claw couplings each end
HOSE CLAMPS - worm drive, 8mm to 38mm capacity
HOSE REEL - retractable, plastic, air/water, Taiwan made
HOSE REELS - air driven, metal, air/water, Australian made, heavy duty
HOSE REELS - hand crank, metal, air/water, Australian made, heavy duty
HOSE REELS - retractable, plastic, air/water, Australian made
HOSE REELS - spring rewind, metal, air/water, Australian made
HOSE REELS - spring rewind, metal, air/water, Australian made, heavy duty
IMACT WRENCH - straight grip, 3/8" sq. dr., 10mm capacity, 70Nm, 0.65kg
IMPACT ACCESSORIES - ‘O’ Ring / Pin sets for 1-1/2"sq dr impact sockets
IMPACT ACCESSORIES - ‘O’ Ring / Pin sets for 1"sq dr impact sockets
IMPACT ACCESSORIES - ‘O’ Ring / Pin sets for 1/2"sq dr impact sockets
IMPACT ACCESSORIES - ‘O’ Ring / Pin sets for 2-1/2"sq dr impact sockets
IMPACT ACCESSORIES - ‘O’ Ring / Pin sets for 3/4"sq dr impact sockets
IMPACT ACCESSORIES - ‘O’ Ring / Pin sets for 3/8" sq dr impact sockets
W-7
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION INDEX
8
W-8
PRODUCT DESCRIPTION
IMPACT ACCESSORIES - Impact Adaptor, 1-1/2" female sq dr to 1" male sq dr, 90mm long
IMPACT ACCESSORIES - Impact Adaptor, 1-1/2" female sq dr to 1" male sq dr, 90mm long
BRAND
ALLIANCE
ALLIANCE
PART NUMBER
A77208
A77208
PG.
L-12
L-12
IMPACT ACCESSORIES - Impact Adaptor, 1-1/2" female sq dr to 2-1/2" male sq dr, 90mm long
IMPACT ACCESSORIES - Impact Adaptor, 1-1/2" female sq dr to 2-1/2" male sq dr, 90mm long
IMPACT ACCESSORIES - Impact Adaptor, 1" female sq dr to 1-1/2" male sq dr, 90mm long
IMPACT ACCESSORIES - Impact Adaptor, 1" female sq dr to 1-1/2" male sq dr, 90mm long
IMPACT ACCESSORIES - Impact Adaptor, 1" female sq dr to 3/4" male sq dr, 75mm long
IMPACT ACCESSORIES - Impact Adaptor, 1" female sq dr to 3/4" male sq dr, 75mm long
IMPACT ACCESSORIES - Impact Adaptor, 1/2" female sq dr to 3/4" male sq dr, 50mm long
IMPACT ACCESSORIES - Impact Adaptor, 1/2" female sq dr to 3/4" male sq dr, 50mm long
IMPACT ACCESSORIES - Impact Adaptor, 1/2" female sq dr to 3/8" male sq dr, 40mm long
IMPACT ACCESSORIES - Impact Adaptor, 1/2" female sq dr to 3/8" male sq dr, 40mm long
IMPACT ACCESSORIES - Impact Adaptor, 1/4" female sq dr to 3/8" male sq dr, 30mm long
IMPACT ACCESSORIES - Impact Adaptor, 1/4" female sq dr to 3/8" male sq dr, 30mm long
IMPACT ACCESSORIES - Impact Adaptor, 2-1/2" female sq dr to 1-1/2" male sq dr, 150mm long
IMPACT ACCESSORIES - Impact Adaptor, 2-1/2" female sq dr to 1-1/2" male sq dr, 150mm long
IMPACT ACCESSORIES - Impact Adaptor, 3/4" female sq dr to 1" male sq dr, 65mm long
IMPACT ACCESSORIES - Impact Adaptor, 3/4" female sq dr to 1" male sq dr, 65mm long
IMPACT ACCESSORIES - Impact Adaptor, 3/4" female sq dr to 1/2" male sq dr, 60mm long
IMPACT ACCESSORIES - Impact Adaptor, 3/4" female sq dr to 1/2" male sq dr, 60mm long
IMPACT ACCESSORIES - Impact Adaptor, 3/8" female sq dr to 1/2" male sq dr, 35mm long
IMPACT ACCESSORIES - Impact Adaptor, 3/8" female sq dr to 1/2" male sq dr, 35mm long
IMPACT ACCESSORIES - Impact Adaptor, 3/8" female sq dr to 1/4" male sq dr, 30mm long
IMPACT ACCESSORIES - Impact Adaptor, 3/8" female sq dr to 1/4" male sq dr, 30mm long
IMPACT ACCESSORIES - Universal Joint, 1-1/2" female sq dr to 1-1/2" male sq dr, 180mm long
IMPACT ACCESSORIES - Universal Joint, 1" female sq dr to 1" male sq dr, 130mm long
IMPACT ACCESSORIES - Universal Joint, 1/4" female sq dr to 1/4" male sq dr, 30mm long
IMPACT ACCESSORIES - Universal Joint, 2-1/2" female sq dr to 2-1/2" male sq dr, 260mm long
IMPACT ACCESSORIES - Universal Joint, 3/4" female sq dr to 3/4" male sq dr, 110mm long
IMPACT ACCESSORIES - Universal Joint, 3/8" female sq dr to 3/8" male sq dr, 70mm long
IMPACT ACCESSORIES - Universal Joints, 1/2" female sq dr to 1/2" male sq dr, 75 or 100mm long
IMPACT DRIVER - pistol grip, 1/4" hex. dr., 6mm cap., rubber grip handle, 35Nm, 0.37kg
IMPACT DRIVER - pistol grip, 1/4" hex. dr., 6mm capacity, 65Nm, 0.98kg
IMPACT DRIVER - pistol grip, 1/4" hex. dr., 8mm capacity, 55Nm, 1.22kg
IMPACT DRIVER - pistol grip, 1/4" hex. dr., 8mm capacity, 70Nm, 1.32kg
IMPACT DRIVER - straight grip, 1/4" hex. dr., 6mm capacity, 55Nm, 0.68kg
IMPACT DRIVER - straight grip, 1/4" hex. dr., 6mm capacity, 65Nm, 0.87kg
IMPACT DRIVER - straight grip, 1/4" hex. dr., 8mm capacity, 80Nm, 1.21kg
IMPACT EXTENSIONS - 1-1/2"sq dr, 250, 380 & 500mm long
IMPACT EXTENSIONS - 1"sq dr, 100, 180, 255, 330mm long
IMPACT EXTENSIONS - 1/2"sq dr, 75, 150 or 250mm long
IMPACT EXTENSIONS - 1/4"sq dr, 50, 100 & 150mm long
IMPACT EXTENSIONS - 2-1/2"sq dr, 250, 380 & 500mm long
IMPACT EXTENSIONS - 3/4"sq dr, 100, 180, 255 & 330mm long
IMPACT EXTENSIONS - 3/8"sq dr, 75, 150 & 250mm long
IMPACT SOCKETS - 1-1/2"sq dr, 30mm AF to 150mm AF, 67 to 155mm long
IMPACT SOCKETS - 1"sq dr, 19mm to 115mm AF, 58 to 125mm long
IMPACT SOCKETS - 1"sq dr, 3/4”AF to 4-1/2"AF, 58 to 114mm long
IMPACT SOCKETS - 1/2"sq dr, 5/16”AF to 1-1/4"AF, 38 or 47mm long
IMPACT SOCKETS - 1/2"sq dr, 8mm AF to 32mm AF, 38 to 48mm long
IMPACT SOCKETS - 1/4"sq dr, 4mm to 15mm AF, 25mm long
IMPACT SOCKETS - 1/4"sq dr, 5/32" to 9/16"AF, 25mm long
IMPACT SOCKETS - 2-1/2"sq dr, 41mm AF to 235mm AF, 110 to 260mm long
IMPACT SOCKETS - 3/4"sq dr, 11/16"AF to 2"AF, 51 to 68mm long
IMPACT SOCKETS - 3/4"sq dr, 17mm AF to 60mm AF, 51 to 72mm long
IMPACT SOCKETS - 3/8"sq dr, ¼”AF to 7/8"AF, 32mm long
IMPACT SOCKETS - 3/8"sq dr, 6mm AF to 22mm AF, 32mm long
IMPACT WRENCH - "D"-handle, 1-1/2"sq dr, 5933Nm, 15.3kg
IMPACT WRENCH - "T"-handle, 1-1/2"sq dr, 7995Nm, 32.0kg
IMPACT WRENCH - "T"-handle, 2-1/2"sq dr, 26,370Nm, 67.0kg
IMPACT WRENCH - "T"-handle, 2"sq dr, 25,544Nm, 67.0kg
IMPACT WRENCH - "T"-handle, 2"sq dr, 8954Nm, 32.0kg
IMPACT WRENCH - butterfly throttle, 3/8' sq dr, 102Nm
IMPACT WRENCH - D-handle, 1-1/2" sq. dr., 4068Nm, 19.70kg
IMPACT WRENCH - D-handle, 1-1/2" sq. dr., 8" extended anvil, 4068Nm, 22.81kg
IMPACT WRENCH - D-handle, 1" sq. dr. 38mm capacity, 2200Nm, 8.87kg
IMPACT WRENCH - D-handle, 1" sq. dr., 2034Nm, 9.60kg
IMPACT WRENCH - D-handle, 1" sq. dr., 38mm capacity, 2300Nm, 8.44kg
IMPACT WRENCH - D-handle, 1" sq. dr., 6" extended anvil, 2034Nm, 11.30kg
IMPACT WRENCH - D-handle, 1" sq. dr., extra power, 2441Nm, 10.62kg
IMPACT WRENCH - D-handle, 1" sq. dr., extra power, 6" extended anvil, 2441Nm, 12.50kg
IMPACT WRENCH - D-handle, 1" sq. dr., maximum power, 3390Nm, 15.30kg
IMPACT WRENCH - D-handle, 1" sq. dr., maximum power, 8" extended anvil, 3390Nm, 16.80kg
IMPACT WRENCH - D-handle, 1" sq. dr., more power, 2712Nm, 12.96kg
IMPACT WRENCH - D-handle, 1" sq. dr., more power, 8" extended anvil, 2712Nm, 16.50kg
IMPACT WRENCH - D-handle, 3/4" sq. dr., 3" extended anvil, 2033Nm, 10.05kg
IMPACT WRENCH - p/grip, 1/2" sq. dr., 20mm cap., 2" ext. anvil, rubber grip handle/cover, 450Nm, 1.79kg
IMPACT WRENCH - p/grip, 3/4" sq. dr., 24mm cap., 2" ext. anvil, rubber grip handle/cover, 1650Nm, 3.95kg
IMPACT WRENCH - pistol grip, 1-1/2"sq dr, 5933Nm, 14.9kg
IMPACT WRENCH - pistol grip, 1" sq. dr., 1627Nm, 5.64kg
IMPACT WRENCH - pistol grip, 1" sq. dr., 38mm capacity, 2160Nm, 8.56kg
IMPACT WRENCH - pistol grip, 1" sq. dr., 38mm capacity, 2200Nm, 8.13kg
IMPACT WRENCH - pistol grip, 1" sq. dr., 6" extended anvil, 1627Nm, 6.52kg
IMPACT WRENCH - pistol grip, 1" sq. dr., extra power, 2441Nm, 10.62kg
IMPACT WRENCH - pistol grip, 1" sq. dr., extra power, 6" extended anvil, 2441Nm, 11.82kg
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
MISC
MISC
MISC
MISC
MISC
ALLIANCE
KUANI
KUANI
SHINANO
KUANI
SHINANO
KUANI
KUANI
KUANI
KUANI
KUANI
KUANI
KUANI
KUANI
SHINANO
SHINANO
MISC
KUANI
SHINANO
SHINANO
KUANI
KUANI
KUANI
A77216
A77216
A76216
A76216
A76208
A76208
A74216
A74216
A74208
A74208
A72803
A72803
A78208
A78208
A75216
A75216
A74707
A75208
A73216
A73216
A73208
A73208
A77700
A76700
A72701
A78700
A75700
A73700
*
SI-1070
SI-1065
SI-1356D
SI-1365D
SI-1301D
SI-1060
SI-1370D
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
PT-3615D
PT-3815T
PT-6325T
PT-6320T
PT-3820T
AL-2251
KI-55
KI-55-8
SI-1776T
KI-36
SI-1770T
KI-36-6
KI-38
KI-38-6
KI-45
KI-45-8
KI-40
KI-40-8
KI-35-3
SI-1492A
SI-1556
PT-3615P
KI-32
SI-1766T
SI-1760T
KI-32-6
KI-38P
KI-38P-6
L-12
L-13
L-12
L-12
L-10
L-12
L-9
L-10
L-9
L-9
L-8
L-9
L-12
L-13
L-10
L-12
L-9
L-10
L-9
L-9
L-8
L-9
L-12
L-12
L-8
L-13
L-10
L-9
L-9
D-10
D-10
D-10
D-10
D-9
D-9
D-10
L-12
L-12
L-9
L-8
L-13
L-10
L-9
L-12
L-11
L-11
L-9
L-9
L-8
L-8
L-13
L-10
L-10
L-8
L-8
R-10
R-11
R-12
R-12
R-11
A-11
B-7
B-7
D-14
B-5
D-14
B-6
B-6
B-6
B-7
B-7
B-7
B-7
B-5
D-13
D-14
R-10
B-5
D-14
D-14
B-5
B-6
B-6
Specifications subject to change without notice. E&OE. ©
PRODUCT DESCRIPTION INDEX
BRAND
SHINANO
KUANI
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
ALLIANCE
KUANI
KUANI
KUANI
KUANI
ALLIANCE
ALLIANCE
MISC
SHINANO
KUANI
KUANI
SHINANO
KUANI
KUANI
KUANI
ALLIANCE
ALLIANCE
MISC
SHINANO
SHINANO
SHINANO
SHINANO
KUANI
SHINANO
IAT
IAT
IAT
IAT
IAT
SHINANO
SHINANO
SHINANO
BOSCH
NORGREN
NORGREN
NORGREN
NORGREN
NORGREN
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
TOP CAT
NORGREN
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
AMTAK
NORGREN
NORGREN
NORGREN
TRELAWNY
ALLIANCE
TRELAWNY
ALLIANCE
TRELAWNY
ALLIANCE
TRELAWNY
ALLIANCE
TRELAWNY
TRELAWNY
ALLIANCE
TRELAWNY
ALLIANCE
TRELAWNY
ALLIANCE
TRELAWNY
PART NUMBER
SI-140T
KI-869-2
SI-1422T
SI-1420T
SI-1456
SI-1482A
SI-1480A
SI-1442T
SI-1490A
AL-2350
KI-859
KI-859K
KI-8571-2
KI-8571
AL-2359-2
AL-2359
PT-252
SI-1310
KI-23
KI-23K
SI-1550
KI-23-6
KI-30
KI-30-6
AL-2423
AL-2423-6
PT-262
SI-1365
SI-1351
SI-1315
SI-1605
KI-311J
SI-1355
IAT-8010
IAT-8008
IAT-8025
IAT-8012
IAT-8019
SI-1610
SI-1370
SI-1305
IAT-1268
L74M-4GP-QDN
L72M-2GP-QWN
L74M-6GP-QDN
L73M-3GP-QDN
L68M-8GP-ERN
TP-4L
TP-5L
TP-2L
TP-1L
TP-3L
406EM
AA-EM4
AL-634
MTA5
MUA5
MTA3
AA-825
*
*
AA-808
AL-2460
AT-3340
AT-3345
AM221
74316-50
5203-06
18 025 003
C6000-2FTC
C6000-2FTC
C6000-3CTC
C6000-3CTC
C6000-3FTB
C6000-3FTB
C6000-3FTC
C6000-3FTC
C6000-3FTS
C6000-3PTC
C6000-3PTC
C6000-4CTC
C6000-4CTC
C6000-4FTC
C6000-4FTC
137.3498
PG.
D-12
B-3
D-12
D-12
D-13
D-13
D-13
D-13
D-13
A-11
B-3
B-3
B-4
B-4
A-12
A-11
R-9
D-11
B-4
B-4
D-14
B-4
B-4
B-5
A-12
A-12
R-9
D-12
D-11
D-11
D-12
B-3
D-12
C-5
C-5
C-6
C-5
C-6
D-13
D-11
D-11
R-7
Q-7
Q-5
Q-8
Q-6
Q-11
Q-17
Q-17
Q-16
Q-16
Q-16
L-25
L-21
P-16
P-15
P-15
P-15
L-19
E-16
Q-10
L-17
A-10
A-12
A-12
R-14
Q-10
Q-10
Q-14
I-26
L-15
I-26
L-15
I-26
L-15
I-26
L-15
I-26
I-26
L-15
I-26
L-15
I-26
L-15
I-31
Specifications subject to change without notice. E&OE. ©
9
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION
IMPACT WRENCH - pistol grip, 1/2' sq. dr., 18mm capacity, polymer handle, 850Nm, 2.12kg
IMPACT WRENCH - pistol grip, 1/2' sq. dr., 2" extended anvil, 814Nm, 2.96kg
IMPACT WRENCH - pistol grip, 1/2" sq. dr., 16mm capacity, 2" extended anvil, 480Nm, 2.64kg
IMPACT WRENCH - pistol grip, 1/2" sq. dr., 16mm capacity, 500Nm, 2.55kg
IMPACT WRENCH - pistol grip, 1/2" sq. dr., 16mm capacity, polymer body, 220Nm, 1.13kg
IMPACT WRENCH - pistol grip, 1/2" sq. dr., 18mm capacity, polymer handle, 780Nm, 2.11kg
IMPACT WRENCH - pistol grip, 1/2" sq. dr., 18mm capacity, polymer handle, 800Nm, 2.07kg
IMPACT WRENCH - pistol grip, 1/2" sq. dr., 18mm capacity, polymer handle, 850Nm, 2.22kg
IMPACT WRENCH - pistol grip, 1/2" sq. dr., 20mm cap., rubber grip handle/cover, 450Nm, 1.76kg
IMPACT WRENCH - pistol grip, 1/2" sq. dr., 380Nm
IMPACT WRENCH - pistol grip, 1/2" sq. dr., 814Nm, 2.80kg
IMPACT WRENCH - pistol grip, 1/2" sq. dr., 814Nm, 2.80kg, Kit
IMPACT WRENCH - pistol grip, 1/2" sq. dr., extra power, 2" extended anvil, 949Nm, 2.97kg
IMPACT WRENCH - pistol grip, 1/2" sq. dr., extra power, 949Nm, 2.86kg
IMPACT WRENCH - pistol grip, 1/2" sq. dr., super duty, 2" extended anvil, 542Nm tighten, 677Nm undo
IMPACT WRENCH - pistol grip, 1/2" sq. dr., super duty, 542Nm tighten, 677Nm undo
IMPACT WRENCH - pistol grip, 1/2"sq dr, 850Nm, no exposed light metal parts
IMPACT WRENCH - pistol grip, 1/4" sq. dr., 8mm capacity, rubber grip handle, 40Nm, 0.63kg
IMPACT WRENCH - pistol grip, 3/4" sq. dr., 1085Nm, 4.55kg
IMPACT WRENCH - pistol grip, 3/4" sq. dr., 1085Nm, 4.55kg, Kit
IMPACT WRENCH - pistol grip, 3/4" sq. dr., 24mm cap., rubber grip handle/cover, 1650Nm, 3.25kg
IMPACT WRENCH - pistol grip, 3/4" sq. dr., 6" extended anvil, 1085Nm, 4.99kg
IMPACT WRENCH - pistol grip, 3/4" sq. dr., extra power, 1492Nm, 5.60kg
IMPACT WRENCH - pistol grip, 3/4" sq. dr., extra power, 6" extended anvil, 1491Nm, 6.52kg
IMPACT WRENCH - pistol grip, 3/4" sq. dr., super duty, 1016Nm tighten, 1288Nm undo
IMPACT WRENCH - pistol grip, 3/4" sq. dr., super duty, 6" extended anvil, 1016Nm tighten, 1288Nm undo
IMPACT WRENCH - pistol grip, 3/4"sq dr, 1650Nm, no exposed light metal parts
IMPACT WRENCH - pistol grip, 3/8" sq. dr., 10mm capacity, 100Nm, 1.31kg
IMPACT WRENCH - pistol grip, 3/8" sq. dr., 10mm capacity, 90Nm, 1.10kg, roller clutch
IMPACT WRENCH - pistol grip, 3/8" sq. dr., 10mm capacity, rubber grip handle, 60Nm, 0.63kg
IMPACT WRENCH - pistol grip, 3/8" sq. dr., 16mm cap., rubber grip handle/cover, 350Nm, 1.03kg
IMPACT WRENCH - pistol grip, 3/8" sq. dr., 271Nm, 1.35kg
IMPACT WRENCH - pistol grip, 3/8"sq. dr., 10mm capacity, 90Nm, 1.12Kg, single hammer clutch
IMPACT WRENCH - pistol grip, compact, 1/2" sq. dr., 678Nm, 1.60kg
IMPACT WRENCH - pistol grip, compact, 3/8" sq. dr., 678Nm, 1.60kg
IMPACT WRENCH - pistol grip, lightweight polymer motor housing, 1" sq. dr., 1382Nm, 4.00kg
IMPACT WRENCH - pistol grip, lightweight polymer motor housing, 1/2" sq. dr., 813Nm, 2.00kg
IMPACT WRENCH - pistol grip, lightweight polymer motor housing, 3/4" sq. dr., 1356Nm, 3.80kg
IMPACT WRENCH - pistol/grip, 1/2" sq. dr., 18mm cap., compact, rubber grip handle/cover, 450Nm, 1.04kg
IMPACT WRENCH - straight grip, 3/8" sq. dr., 10mm capacity, 100Nm, 1.18kg
IMPACT WRENCH - straight grip, 3/8" sq. dr., 10mm capacity, 90Nm, 0.94kg
JIGSAW - locking switch, safety cover, anti-splinter insert, 60mm timber, 30mm plastic, 10mm steel
LUBRICATOR - "Excelon" modular system, 1/2"FBSP, micro fog
LUBRICATOR - "Excelon" modular system, 1/4"FBSP, micro fog
LUBRICATOR - "Excelon" modular system, 3/4"FBSP, micro fog
LUBRICATOR - "Excelon" modular system, 3/8"FBSP, micro fog
LUBRICATOR - "Olympian Plus" plug-in system, 1"FBSP, micro fog
LUBRICATOR - in-line, 1"BSP, 330ml oil capacity
LUBRICATOR - in-line, 1"BSP, 480ml oil capacity
LUBRICATOR - in-line, 1/2"BSP, 42ml oil capacity
LUBRICATOR - in-line, 1/4"BSP, 31ml oil capacity
LUBRICATOR - in-line, 3/4"BSP, 111ml oil capacity
MANDREL - 1/4"shank x 5/16"-24 female thread, for Eraser Wheels
MANDREL - EZ-LOK abrasive disc system
MANIFOLD - air hose distribution, 6 port, claw couplings, ball valves, pressure gauge
MANIFOLD - bar type, 1/4"FBSP inlet, 5 x 1/4"FBSP outlets
MANIFOLD - bar type, high volume, ½”FBSP inlet, 5 x ¼”FBSP outlets
MANIFOLD - dome type, 3/8"FBSP inlet, 3 x 1/4"FBSP outlets
MOIL POINT - 10.2mm round shank
MOTOR - from 900W to 3000W and 120rpm to 5500rpm
MOUNTING BRACKETS - "Excelon" modular system
MUFFLER CUTTER - 10.2mm round shank
NAILER - bump, palm grip, push to start, 1000bpm
NAILER - C1 Series, 10mm-32mm nails
NAILER - C1 Series, 15mm-50mm nails
NAME PLATE & CABLE CLIP TACKER
NECK BRACKET - "Excelon" 72 modular system, includes Panel Mount
NECK BRACKET - "Excelon" 73 modular system, includes Panel Mount
NECK BRACKET - for RO7 mini regulator, includes mounting ring
NEEDLE - for needle scalers, taper head, 2mm dia, flat tip, carbon steel
NEEDLE - for needle scalers, taper head, 2mm dia, flat tip, carbon steel
NEEDLE - for needle scalers, taper head, 3mm dia, chisel tip, carbon steel
NEEDLE - for needle scalers, taper head, 3mm dia, chisel tip, carbon steel
NEEDLE - for needle scalers, taper head, 3mm dia, flat tip, beryllium copper, non-sparking
NEEDLE - for needle scalers, taper head, 3mm dia, flat tip, beryllium copper, non-sparking
NEEDLE - for needle scalers, taper head, 3mm dia, flat tip, carbon steel
NEEDLE - for needle scalers, taper head, 3mm dia, flat tip, carbon steel
NEEDLE - for needle scalers, taper head, 3mm dia, flat tip, stainless steel
NEEDLE - for needle scalers, taper head, 3mm dia, pointed tip carbon steel
NEEDLE - for needle scalers, taper head, 3mm dia, pointed tip, carbon steel
NEEDLE - for needle scalers, taper head, 4mm dia, chisel tip, carbon steel
NEEDLE - for needle scalers, taper head, 4mm dia, chisel tip, carbon steel
NEEDLE - for needle scalers, taper head, 4mm dia, flat tip, carbon steel
NEEDLE - for needle scalers, taper head, 4mm dia, flat tip, carbon steel
NEEDLE SCALER - long reach, 'Lite', 28 x 3mm needles, 120cm long, 2200bpm
W-9
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION INDEX
10
W-10
PRODUCT DESCRIPTION
NEEDLE SCALER - long reach, 'Lite', 28 x 3mm needles, 150cm long, 2200bpm
NEEDLE SCALER - long reach, 'Lite', 28 x 3mm needles, 180cm long, 2200bpm
NEEDLE SCALER - long reach, 28 x 3mm needles, 120cm long, 2200bpm
NEEDLE SCALER - long reach, 28 x 3mm needles, 150cm long, 2200bpm
NEEDLE SCALER - long reach, 28 x 3mm needles, 180cm long, 2200bpm
NEEDLE SCALER - long reach, 28 x 3mm needles, 60cm long, 2200bpm
NEEDLE SCALER - Model 1B, straight grip, front exhaust, 12 x 3mm needles, 3800bpm
NEEDLE SCALER - Model 2B, straight grip, front exhaust, 19 x 3mm needles, 3000bpm
NEEDLE SCALER - Model 2BPG, pistol grip, front exhaust, 19 x 3mm needles, 3000bpm
NEEDLE SCALER - Model 3b, semi pistol grip, front exhaust, 28 x 3mm needles, 2200bpm
NEEDLE SCALER - Model 3BPG, pistol grip, front exhaust, 28 x 3mm needles, 2200bpm
NEEDLE SCALER - Model 4B, semi pistol grip, front exhaust, 35 x 4mm needles, 2200bpm
NEEDLE SCALER - Model VL203, pistol grip, low vibration, front exhaust, 19 x 3mm needles, 2400bpm
NEEDLE SCALER - Model VL223, straight grip, low vibration, front exhaust, 19 x 3mm needles, 2400bpm
NEEDLE SCALER - Model VL303, pistol grip, low vibration, front exhaust, 28 x 3mm needles, 3000bpm
NEEDLE SCALER - pistol grip, 28 needle, heavy duty, 4500bpm
NEEDLE SCALER - straight resin grip, heavy duty, 12 x 3mm dia. needles, 3500bpm
NEEDLE SCALER ATTACHMENT - for chisel guns
NEEDLE/CHISEL SCALER KIT - includes 1B straight needle scaler, chisels etc.
NEEDLE/CHISEL SCALER KIT - includes 2B straight needle scaler, chisels etc,
NEEDLE/CHISEL SCALER KIT - includes 2BPG pistol grip needle scaler, chisels etc
NEEDLE/CHISEL SCALER KIT - includes 3B semi pistol grip needle scaler
NEEDLE/CHISEL SCALER KIT - includes 3BPG pistol grip needle scaler
NEEDLE/CHISEL SCALER KIT - includes 4B semi pistol grip needle scaler
NEEDLE/CHISEL SCALER KIT - includes VL223 & VL203 low vibration needle scalers
NEEDLE/CHISEL SCALER KIT - includes VL303 low vibration pistol grip needle scaler
NIBBLER - sheet metal, straight grip, 1.2mm mild steel, 2500spm
NIBBLER - sheet metal, straight grip, 1.6mm mild steel, 2500spm
NIBBLER - sheet metal, straight grip, 2.1mm mild steel, 1200spm
NIBBLER - sheet metal, straight grip, polymer body cover, 1.2mm mild steel, 2600spm
NIBBLER - steel plate, D-handle, 4.8mm mild steel, 1200spm
NUTRUNNER - flat head, 1" sq. dr., 25mm cap., stall type, reversible, double speedshift, 1350Nm, 850W, 225rpm
NUTRUNNER - right angle, 1/2"sq. dr., 15mm capacity, stall type, reversible, 64Nm, 470W, 240rpm
NUTRUNNER - right angle, 3/4"sq. dr. 20mm capacity, stall type, reversible, speedshift, 240Nm, 850W, 535rpm
NUTRUNNER - right angle, 3/4"sq. dr., 20mm capacity, stall type, reversible, 180Nm, 470W, 85rpm
NUTRUNNER - right angle, 3/4"sq. dr., 20mm capacity, stall type, reversible, speedshift, 185Nm, 470W, 625rpm
NUTRUNNER - right angle, 3/8"sq. dr., 10mm capacity, stall type, reversible, 10Nm, 470W, 1575rpm
NUTRUNNER - right angle, torque shut-off, 3-18Nm, 3/8" sq. dr.
NUTRUNNER - right angle, torque shut-off, 5-25Nm, 3/8" sq. dr.
NUTRUNNER - right angle, torque shut-off, 7-40Nm, 3/8" sq. dr.
NUTRUNNER -right angle, 3/4"sq. dr., 20mm capacity, stall type, reversible, 240Nm, 850W, 110rpm
NUTRUNNERS - high torque, gear drive, pistol grip, 3/4"sq dr, 825Nm; 1"sq dr, 1250Nm; 1"sq dr, 1700Nm
OIL - air tool & compressor lubricants
OILER - in-line, mini, 1/4"BSP
OSCILLATING CUTTER - 63mm steel blade, depth gauge for 2, 4 or 6mm cuts, 20000spm
PAINT SCRAPER - 10.2mm round shank, 60mm wide
PANEL CRIMPER - 10.2mm round shank
PANEL CUTTER - 75mm disc, 9.5CH, polymer body cover, 21000rpm
PANEL CUTTER - 75mm disc, 9.5mm CH, 17000rpm
PANEL MOUNT RING - "Excelon" 72 modular system, plastic
PANEL MOUNT RING - "Excelon" 73 modular system, zinc
PANEL MOUNT RING - "Excelon" 74 modular system, zinc
PAVEMENT BREAKER - 15kg, 25 x 108mm chuck, 1850bpm
PAVEMENT BREAKER - 20kg, 25 x 108mm chuck, 1500bpm
PAVEMENT BREAKER - 20kg, 28 x 108mm chuck
PAVEMENT BREAKER - 22kg, 28 x 160mm chuck
PAVEMENT BREAKER - 23kg, 28 x 160mm chuck, low vibration
PAVEMENT BREAKER - 26kg, 28 x 160mm chuck
PAVEMENT BREAKER - 28kg, 28 x 160mm chuck
PAVEMENT BREAKER - 30kg, 28 x 160mm chuck, low vibration
PAVEMENT BREAKER - 31kg, 28 x 160mm chuck, 1680bpm
PAVEMENT BREAKER - 40kg, 28 x 160mm chuck
PAVEMENT BREAKER - 42kg, 28 x 160mm chuck, 1350bpm
PAVEMENT BREAKER - low vibration, 21kg, 25 x 108mm chuck, 1500bpm
PAVEMENT BREAKER - low vibration, 32kg, 28 x 160mm chuck, 1680bpm
PAVEMENT BREAKER - low vibration, 41kg, 28 x 160mm chuck, 1350bpm
PAVEMENT BREAKER ACCESSORIES - for APT-117
PAVEMENT BREAKER ACCESSORIES - for APT-160
PICKET POST DRIVER - 18kg + accessories
PILE CUTTER - 200mm, 22CH, 2250W, 6000rpm
PILE CUTTER - 300mm, 22CH, 3000W, 5000rpm
PILE CUTTER - 350mm, 3000W, 4000rpm
PIN STRIPE REMOVER - eraser wheel, polymer body cover, 2600rpm
PIN STRIPE REMOVER - eraser wheel, polymer body cover, 4090rpm
PIPE ADAPTORS - "Excelon" modular system, 1/4", 3/8", 1/2", 3/4"FBSP
PITTSBURG TOOL - 10.2mm round shank
PLANETARY FLOOR GRINDER - triple head, 415V electric, 5.5kW, 540mm grinding dia.
PLANETARY FLOOR GRINDER - triple head, 415V electric, 7.5kW, 650mm grinding dia., 40L water tank
PLANETARY FLOOR GRINDER - triple head, 415V electric, 7.5kW, 650mm grinding dia., 40L water tank, soft start
PLANETARY FLOOR GRINDER ACCESSORIES - Diamond abrasives for Planetary Grinders
PLANETARY FLOOR GRINDER ACCESSORIES - Mounting plates for hook & loop mounted pads, flower & triangle centre plates
PLANETARY FLOOR GRINDER ACCESSORIES - Polishing pads for planetary grinders, 400, 800, 1800 & 3500grits
PLANETARY FLOOR GRINDER ACCESSORIES - segment mounting plates for planetary grinders, flower & triangle centres
POLE COMPACTOR - low vibration, single head, heavy duty
POLE COMPACTOR - single head, heavy duty
POLE COMPACTOR ACCESSORIES - 100 x 100mm compactor foot, pin fi t
Specifications subject to change without notice. E&OE. ©
BRAND
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
ALLIANCE
SHINANO
ALLIANCE
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
KETT
SHINANO
KETT
ALLIANCE
KETT
A.A.T.
A.A.T.
A.A.T.
A.A.T.
A.A.T.
A.A.T.
IAT
IAT
IAT
A.A.T.
MISC
ALLIANCE
ALLIANCE
SHINANO
ALLIANCE
ALLIANCE
ALLIANCE
SHINANO
NORGREN
NORGREN
NORGREN
APT
APT
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
APT
PNEUTECH
APT
APT
APT
APT
APT
APT
MISC
TOP CAT
TOP CAT
TOP CAT
ALLIANCE
IAT
NORGREN
ALLIANCE
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
PART NUMBER
137.3598
136.3698
137.34
137.35
137.36
137.32
111.1
121.2
123.21
131.3
133.31
141.31
196.2003
196.2103
196.3003
AL-6000
SI-4150
AA-5000
110.1
120.2
122.21
130.3
132.31
140.4
196.225
196.3103
PN-1000
SI-4600
AN-2000
AL-1960
AN-6000
ARSDD3A-M1350
ARS2A-M060
ARSD3A-M240
ARS2A-M180
ARS2DA-M185
ARS2A-M010
IAT-3080
IAT-3081
IAT-3082
ARS3A-M240
*
*
AA-5007
SI-4300
AA-823
AA-820
AL-1340
SI-2033
4248-89
5191-88
4348-89
APT-117
APT-140
PT-200
PT-220
PT-230LV
PT-260
PT-280
PT-300LV
APT-160
PT-400
APT-190
APT-140A
APT-160A
APT-190
*
*
PT-731
56PCK;8000;841
66PCK;5000;1241
66PCK;4000;1441
AL-1341
IAT-6041
*
AA-PC-1
TPG 540
TPG 650
TPG 650/C/S
*
*
*
*
VLLRS55
LRS55
450.5011
PG.
I-31
I-31
I-31
I-31
I-31
I-31
I-24
I-24
I-24
I-25
I-25
I-25
I-24
I-24
I-25
A-13
D-15
L-15
I-27
I-27
I-27
I-27
I-27
I-28
I-28
I-28
G-3
D-16
G-3
A-13
G-4
F-7
F-5
F-6
F-5
F-6
F-5
C-7
C-7
C-7
F-6
R-13
L-25
L-20
D-16
L-19
L-18
A-13
D-16
Q-10
Q-10
Q-10
K-6
K-6
J-4
J-5
J-5
J-5
J-4
J-5
K-6
J-4
K-6
K-9
K-9
K-10
K-7
K-8
R-15
E-17
E-17
E-17
A-14
C-19
Q-9
L-19
I-6
I-6
I-6
I-7
I-7
I-7
I-7
I-10
I-10
I-10
PRODUCT DESCRIPTION INDEX
BRAND
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
SHINANO
SHINANO
TOP CAT
ALLIANCE
ALLIANCE
ALLIANCE
TOP CAT
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
NORGREN
NORGREN
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
PNEUTECH
MISC
SHINANO
ALLIANCE
CEJN
ALLIANCE
ALLIANCE
JOPLA
NITTO
ALLIANCE
NORGREN
ALLIANCE
ALLIANCE
SHINANO
SHINANO
SHINANO
SHINANO
ALLIANCE
SHINANO
ALLIANCE
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
ALLIANCE
SHINANO
PART NUMBER
450.5001
450.5013
450.5003
450.5007
450.5017
450.5016
450.5006
150.5
150.925
426.5359
426.539
426.536
SI-3100P
SI-2415
520H2MKS1;750
AL-1555
AL-1555K
AL-1556
4520RA3MKSR;2000
SI-2221
SI-2451
SI-2009
SI-2400
SI-2405
SI-2451LP
EM 125 S
PMH 70F
PMH 70X
TR120
TF120
TF140
TM120 NEG
TW120
TM120
TM140 NEG
TM140
TW140
TW200
TW200D
49500
484292
DCM14
483944
49502
MJ130
PM120S
PR120S
PKR80
PL90
TR140
74507-50
*
AL-63416BM
AL-40216RM
29B-1
*
PT-419
PT-1701
SI-4800
AL-4800
*
*
*
*
*
*
*
AL-2345T
AL-2340T
SI-1435
SI-6000A
SI-1107B
SI-1108B
AL-2314
SI-1200B
AL-2315
SI-1205B
SI-1207
SI-1208
SI-1208Q
SI-1251
SI-1252
SI-1325A
SI-1320A
AL-2331
SI-1345B
PG.
I-10
I-10
I-10
I-10
I-10
I-10
I-10
I-20
I-20
I-20
I-20
I-20
D-18
D-17
E-20
A-15
A-15
A-14
E-20
D-17
D-19
D-17
D-18
D-18
D-19
I-16
I-16
I-16
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
I-17
Q-13
Q-10
Q-14
Q-14
A-23
A-23
J-9
R-16
D-19
A-14
P-10
P-8
P-9
P-10
P-9
P-8
Q-9
A-16
A-16
D-23
D-38
D-20
D-20
A-16
D-20
A-16
D-21
D-20
D-21
D-21
D-20
D-21
D-22
D-22
A-16
D-22
Specifications subject to change without notice. E&OE. ©
11
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION
POLE COMPACTOR ACCESSORIES - 100 x 100mm compactor foot, screw fi t
POLE COMPACTOR ACCESSORIES - 127 x 152mm compactor foot, pin fi t
POLE COMPACTOR ACCESSORIES - 127 x 152mm compactor foot, screw fi t
POLE COMPACTOR ACCESSORIES - 127mm dia. compactor foot, screw fi t
POLE COMPACTOR ACCESSORIES - 127mm diameter compactor foot, pin fi t
POLE COMPACTOR ACCESSORIES - 200 x 100mm compactor foot, pin fi t
POLE COMPACTOR ACCESSORIES - 200 x 100mm compactor foot, screw fi t
POLE SCABBLER - 9 point TCT head, 1100bpm
POLE SCABBLER - low vibration, 9 point TCT head, 1300bpm
POLE SCABBLER ACCESSORIES - 5 point TCT head, pin fi t
POLE SCABBLER ACCESSORIES - 9 point TCT head, pin fi t
POLE SCABBLER ACCESSORIES - TCT cruciform head
POLISHER - dual action, bar handle, hook & loop, 6mm orbit, 150mm pad, 8000rpm
POLISHER - geared head, bar handles, hook & loop, 140mm pad, 1200rpm
POLISHER - horizontal, 200/300mm, alum. Body, side exhaust, 1500W, 750rpm
POLISHER - pistol grip, 75mm, single action, hook & loop pad, 2100rpm
POLISHER - pistol grip, 75mm, single action, hook & loop pad, 2100rpm, Kit
POLISHER - pistol grip, 75mm, single action, quick change disc, 2100rpm
POLISHER - right angle, 180mm, steel body, rear exhaust, 900W, 2000rpm
POLISHER - single action, pistol grip, hook & loop, 70mm pad, 4500rpm
POLISHER - single action, right angle, 180mm plastic back-up pad, takes wool bonnet, 2300rpm
POLISHER - single action, right angle, hook & loop, 80mm pad, 2600rpm
POLISHER - single action, vertical, 180mm plastic back-up pad, takes wool bonnet, 1800rpm
POLISHER - single action, vertical, hook & loop, 150mm pad, 1800rpm
POLISHER/SANDER - linear, takes 100mm x 100mm x 19CH drums, wheels & brushes, 2300rpm
PORTABLE MIXING UNIT - Hand Mixer, 240V electric, 1100W, 0 - 450rpm
PORTABLE MIXING UNIT - Hippo Portamix F - Series, 4 castors
PORTABLE MIXING UNIT - Hippo Portamix X - Series, 2 pneumatic wheels
PORTABLE MIXING UNIT ACCESSORIES - M14 Paddle, 120 dia x 700 - levelling compounds, bitumen coatings, grouts
PORTABLE MIXING UNIT ACCESSORIES - M14 Paddle, 120 dia x 700 - thin liquids & paints
PORTABLE MIXING UNIT ACCESSORIES - M14 Paddle, 140 dia x 700 "
PORTABLE MIXING UNIT ACCESSORIES - M14 Paddle, 140 dia x 700 - dispersions, paints, plasters, gypsum, mortars
PORTABLE MIXING UNIT ACCESSORIES - M14 Paddle, 140 dia x 700 - plasters, concrete mortars, resins & tile adhesives
PORTABLE MIXING UNIT ACCESSORIES - M14 Paddle, 140 dia x 700 - plasters, paste, granules, slurry, resins, epoxy
PORTABLE MIXING UNIT ACCESSORIES - M14 Paddle, 160 dia x 700 "
PORTABLE MIXING UNIT ACCESSORIES - M14 Paddle, 160 dia x 700 "
PORTABLE MIXING UNIT ACCESSORIES - M14 Paddle, 160 dia x 700 "
PORTABLE MIXING UNIT ACCESSORIES - M14 Paddle, 200 dia x 700 "
PORTABLE MIXING UNIT ACCESSORIES - M14 Paddle, 200 dia x 700 - self levelling compounds, screeds, plasterfill & epoxy
PORTABLE MIXING UNIT ACCESSORIES - Paddle adaptor, M14 to 1/2"x 20 female
PORTABLE MIXING UNIT ACCESSORIES - Paddle adaptor, M14 to 1/2"x 20 male
PORTABLE MIXING UNIT ACCESSORIES - Paddle adaptor, M14 to 12mm shaft
PORTABLE MIXING UNIT ACCESSORIES - Paddle adaptor, M14 to 13mm hexagon
PORTABLE MIXING UNIT ACCESSORIES - Paddle adaptor, M14 to 5/8"x11 female
PORTABLE MIXING UNIT ACCESSORIES - Plain shaft mixing paddle for 13mm drills - 120dia x 590 - adjustable fins - plaster, mortar
PORTABLE MIXING UNIT ACCESSORIES - Plain shaft mixing paddle for 13mm drills - 120dia x 590 - plasters, paste, granules, epoxy
PORTABLE MIXING UNIT ACCESSORIES - Plain shaft mixing paddle for 13mm drills - 120dia x 590 - spreading compounds
PORTABLE MIXING UNIT ACCESSORIES - Plain shaft mixing paddle for 13mm drills - 80dia x 400 - thin liquids & paints
PORTABLE MIXING UNIT ACCESSORIES - Plain shaft mixing paddle for 13mm drills - 90dia x 500 - paints, thin liq., adhesives
PORTABLE MIXING UNIT ACCESSORIES- M14 Paddle, 160 dia x 700 "
PORTING BLOCK - "Olympian Plus" plug-in system, 3/8"FBSP top port, 1/4"FBSP side port
PORTING BLOCKS - "Excelon" modular system, 3 x ¼”FBSP auxilliary air outlets
PRESSURE GAUGE - bottom entry, 1/4"MBSP, 63mm dial, 16bar(230psi)
PRESSURE GAUGE - rear entry, 1/8"MBSP, 40mm dial, 10bar(145psi)
PROFILE SANDING PADS - optional, for AL-1513
PROFILE SANDING PADS - special - made to order for AL-1513
PUMP - centrifugal, 25mm discharge, 800lt/min at 6m head
PUMP - drum, for 205litre drums,
PUNCH/FLANGE TOOL - sheet metal, 5.0mm dia. x 1.2mm thick
PUNCH/FLANGE TOOL - sheet metal, 5.0mm dia. x 1.6mm thick
QUICK COUPLERS - Cejn, for reinforced PVC hose
QUICK COUPLERS - Hy-Flo, for reinforced PVC hose, Australian made
QUICK COUPLERS - J-Series, for reinforced PVC hose
QUICK COUPLERS - Jopla, plastic, for reinforced PVC hose
QUICK COUPLERS - Nitto, for reinforced PVC hose
QUICK COUPLERS - R-Series, for reinforced PVC hose
QUICKCLAMPS - "Excelon" modular system
RATCHET WRENCH - heavy duty, front exhaust, 1/2" sq. dr.
RATCHET WRENCH - heavy duty, front exhaust, 3/8" sq. dr.
RATCHET WRENCH - large, front exhaust, heavy duty, 1/2" sq. dr.
RATCHET WRENCH - LED torque display, variable settings, 90-140Nm, 1/2" sq. dr., 150rpm
RATCHET WRENCH - micro mini, rear exhaust, polymer body cover, 1/4" sq. dr.
RATCHET WRENCH - micro mini, rear exhaust, polymer body cover, 3/8" sq. dr.
RATCHET WRENCH - mini, rear exhaust, 1/4" sq dr
RATCHET WRENCH - mini, rear exhaust, 1/4" sq. dr.
RATCHET WRENCH - mini, rear exhaust, 3/8" sq. dr.
RATCHET WRENCH - mini, rear exhaust, 3/8" sq. dr.
RATCHET WRENCH - mini, rear exhaust, polymer body cover, 1/4" sq. dr.
RATCHET WRENCH - mini, rear exhaust, polymer body cover, 3/8" sq. dr.
RATCHET WRENCH - mini, rear exhaust, polymer body cover, quick socket change, 3/8" sq. dr.
RATCHET WRENCH - mini, rear exhaust, polymer body cover, slide switch reverse, 1/4" sq. dr.
RATCHET WRENCH - mini, rear exhaust, polymer body cover, slide switch reverse, 3/8" sq. dr.
RATCHET WRENCH - standard, front exhaust, 1/2" sq. dr.
RATCHET WRENCH - standard, front exhaust, 3/8" sq. dr.
RATCHET WRENCH - standard, rear exhaust, polymer body cover, 1/2" sq. dr.
RATCHET WRENCH - standard, rear exhaust, polymer body cover, 1/2" sq. dr.
W-11
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION INDEX
12
W-12
PRODUCT DESCRIPTION
RATCHET WRENCH - standard, rear exhaust, polymer body cover, 3/8" sq. dr.
RATCHET WRENCH - standard, rear exhaust, polymer body cover, 3/8" sq. dr.
RATCHET WRENCH - standard, rear exhaust, polymer body cover, slide switch reverse, 3/8" sq. dr.
RATCHET WRENCH - standard, rear exhaust, polymer body cover, slider switch reverse, 1/2" sq. dr.
RATCHET WRENCH - standard, rear exhaust, polymer body cover, swing head, socket lock, 3/8" sq. dr.
RATCHET WRENCH - swing head, resin body cover, 1/2" sq. dr.
RATCHET WRENCH - swing head, resin body cover, 3/8" sq. dr.
RATCHET WRENCH - through type, choice of A/F sizes to 12mm
RATCHET WRENCH - through type, choice of A/F sizes to 14mm
RATCHET WRENCH - through type, rear exh., resin body cover, 1/4" & 3/8" sq. dr. + 4 through sockets
RATCHET WRENCH - through type, rear exhaust, 3/8" sq. dr. + 6 through sockets
RATCHET WRENCH - through type, rear exhaust, 3/8" sq. dr. + 6 through sockets, kit
REGULATOR - "Excelon" modular system, 1/2"FBSP
REGULATOR - "Excelon" modular system, 1/4"FBSP
REGULATOR - "Excelon" modular system, 3/4"FBSP
REGULATOR - "Excelon" modular system, 3/8"FBSP
REGULATOR - "Olympian Plus" plug-in system, 1"FBSP
REGULATOR - mini unit, 1/4"FBSP, includes gauge & bracket
RETAINER - for 1/4" hexagon shank screwdriver & drill bits, 3/8"-24 mount
RIVET BUSTER - "D"-handle, 30.16mm bore, 150mm stroke, 1500bpm, 11.82kg
RIVET BUSTER - "T"-handle, 30.16mm bore, 203mm stroke, 1140bpm, 15.90kg
RIVET BUSTER - "T"-handle, 30.16mm stroke, 279mm stroke, 850bpm, 17.27kg
RIVET BUSTER - 4-bolt "D"-handle, 30.16mm bore, 203mm stroke, 1000bpm, 12.73kg, vibration damped
RIVET BUSTER - pistol grip handle, 30.16mm bore, 203mm stroke, 1140bpm, 13.64kg, external trigger,
RIVET BUSTER - pistol grip handle, 30.16mm bore, 279mm stroke, 850bp, 15.00kg, external trigger
RIVET BUSTER - standard "D"-handle, 30.16mm bore, 203mm stroke, 1140bpm, 13.64kg
RIVET BUSTER - standard "D"-handle, 30.16mm bore, 279mm stroke, 850bpm, 15.00kg
RIVET BUSTER ACCESSORIES - points, chisels, heat exchanger punches, rivet back-out punches,
RIVET CUTTER - 10.2mm round shank
RIVET NUT TOOL - air/hydraulic, #6-#10 & 1/4"-1/2" capacity, 2176kg traction power
RIVET NUT TOOL - air/hydraulic, #6-#10 & 1/4"-1/2" capacity, extra power, 2727kg traction power
RIVET NUT TOOL - air/hydraulic, M3-M12 capacity, 2176kg traction power
RIVET NUT TOOL - air/hydraulic, M4-M10 capacity
RIVET NUT TOOL - air/hydraulic, M4-M12 capacity, extra power, 2727kg traction power
RIVET NUT TOOL - rotary, M3-M6 & 5/32"-1/4" capacity, 600rpm
RIVET NUT TOOL - rotary, M6-M10 & 1/4"-3/8" capacity, 450rpm
RIVET NUT TOOL - rotary, M6-M12 & 7/16" capacity, 100rpm
RIVETER - air/hydraulic, 1/4" capacity, 1250kg traction power
RIVETER - air/hydraulic, 1/4" capacity, polymer body, 1723kg traction power
RIVETER - air/hydraulic, 3/16" capacity, 800kg traction power
RIVETER - air/hydraulic, 5/16" capacity, polymer body, 2040kg traction power
RIVETER - heavy duty, 1/4" capacity, 1100kg traction power
RIVETER - standard, 3/16" capacity, 720kg traction power
ROCK DRILL - 12kg, 22 x 108mm chuck
ROCK DRILL - 17kg, 22 x 108mm chuck, for holes up to 2400mm x 44.5mm dia, 2300bpm
ROCK DRILL - 19kg, 22 x 108mm chuck
ROCK DRILL - 25kg, 22 x 108mm chuck
ROCK DRILL - 28kg, 22 x 108mm chuck, for holes up to 3000mm x 50.0mm dia, 2100bpm
ROCK DRILL - 4kg, rotary hammer, 19 x 95mm chuck, for holes up to 300mm x 25.4mm dia, 3400bpm
ROCK DRILL - 9kg, rotary hammer, 22 x 82mm chuck, for holes up to 400mm x 32mm dia, 2900bpm
ROCK DRILL ACCESSORIES - for APT-109
ROCK DRILL ACCESSORIES - for APT-115
ROCK DRILL ACCESSORIES - for APT-137
ROCK DRILL ACCESSORIES - for APT-140
ROCK DRILL ACCESSORIES - for APT-155
ROTARY HAMMER DRILL - SDS+ bit holder, light weight, 20mm concrete, 30mm timber, 13mm steel
RUBBER ERASER WHEEL - for IAT-6042 & IAT-6044
RUBBER ERASER WHEEL - without Adaptor, for IAT-6042 & IAT-6044
SANDER - belt, 10mm, 1100m/min
SANDER - belt, 10mm, 1100m/min, long arm
SANDER - belt, 10mm, 16000rpm
SANDER - belt, 13mm, 1100m/min, long arm
SANDER - belt, 20mm, 16000rpm
SANDER - belt, 20mm, 2500m/min
SANDER - belt, 30mm, 1900m/min
SANDER - belt/drum, 60mm, 800m/min
SANDER - dual action, bar handle, 5mm orbit, 150mm pad, 10000rpm
SANDER - dual action, bar handle, central vacuum, hook & loop/PSA, 150mm pad, 8000rpm
SANDER - dual action, bar handle, heavy duty, hook & loop/PSA, 150mm pad, 9000rpm
SANDER - dual action, bar handle, heavy duty, self vacuum, hook & loop/PSA, 150mm pad, 9500rpm
SANDER - dual action, bar handle, hook & loop/PSA, 150mm pad, 8000rpm
SANDER - dual action, mini, palm grip, hook & loop, 75mm pad, 12000rpm
SANDER - dual action, mini, palm grip, self vacuum, hook & loop, 75mm pad, 12000rpm
SANDER - dual action, mini, right angle, hook & loop, 3mm orbit, 48mm pad, 12500rpm
SANDER - dual action, palm grip, 3mm orbit, 150mm pad, 10000rpm
SANDER - dual action, palm grip, central vacuum, 3mm orbit, 150mm pad, 10000rpm
SANDER - dual action, palm grip, central vacuum, 5mm orbit, 150mm pad
SANDER - dual action, palm grip, central vacuum, 5mm orbit, 150mm pad, 12000rpm
SANDER - dual action, palm grip, heavy duty, hook & loop/PSA, 150mm pad, 8200rpm
SANDER - dual action, palm grip, heavy duty, self vacuum, hook & loop/PSA, 150mm pad, 8000rpm
SANDER - dual action, palm grip, light weight, hook & loop/PSA, 150mm pad, 10000rpm
SANDER - dual action, palm grip, light weight, self vacuum, hook & loop/PSA, 150mm pad, 9500rpm
SANDER - dual action, palm grip, self vacuum, 3mm orbit, 150mm pad, 10000rpm
SANDER - dual action, pistol grip, hook & loop/PSA, 75mm pad, 14000rpm
SANDER - geared, palm grip, self vacuum, hook & loop, 150mm pad, 1000rpm
SANDER - horizontal, drum, rear exhaust, 900W, 5500rpm
Specifications subject to change without notice. E&OE. ©
BRAND
ALLIANCE
SHINANO
SHINANO
SHINANO
SHINANO
ALLIANCE
ALLIANCE
IAT
IAT
ALLIANCE
SHINANO
SHINANO
NORGREN
NORGREN
NORGREN
NORGREN
NORGREN
NORGREN
ALLIANCE
PNEUTECH
APT
APT
APT
APT
APT
APT
APT
APT
ALLIANCE
IAT
IAT
IAT
IAT
IAT
IAT
IAT
IAT
IAT
IAT
IAT
IAT
ALLIANCE
ALLIANCE
PNEUTECH
APT
PNEUTECH
PNEUTECH
APT
APT
APT
APT
APT
APT
APT
APT
BOSCH
IAT
IAT
SHINANO
SHINANO
ALLIANCE
SHINANO
ALLIANCE
SHINANO
SHINANO
SHINANO
ALLIANCE
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
ALLIANCE
ALLIANCE
IAT
ALLIANCE
SHINANO
SHINANO
SHINANO
SHINANO
ALLIANCE
SHINANO
SHINANO
TOP CAT
PART NUMBER
AL-2330
SI-1340B
SI-1261
SI-1262
SI-1241A
AL-2321
AL-2320
IAT-8512
IAT-8514
AL-2316
SI-1288S
SI-1288SK
R74G-4GK-RMG
R72G-2GK-RMG
R74G-6GK-RMG
R73G-3GK-RMG
R68G-8GK-RLG
R07-205-RNMG
AA-100
PT-124
APT-133TH
APT-1133TH
APT-133FB
APT-133ST
APT-1133ST
APT-133
APT-1133
*
AA-813
IAT-3571I
IAT-3573I
IAT-3571M
IAT-3568
IAT-3573M
IAT-3523
IAT-3524
IAT-3525
IAT-3664
IAT-3681
IAT-3648
IAT-3683
AL-3102
AL-3101
PT-120
APT-117
PT-190
PT-250
APT-155
APT-109
APT-115
*
*
*
*
*
IAT-1205
IAT-6110
IAT-6113
SI-2700
SI-2700L
AL-5010
SI-2700LS
AL-5020
SI-2800
SI-2830
SI-2760
AL-1500
SI-3100V
SI-3105-6
SI-3118-6
SI-3100
SI-3102
SI-3112
SI-2108
AL-1501
AL-1503
IAT-4060
AL-1510
SI-3103-6A
SI-3113-6A
SI-3101-6
SI-3111-6
AL-1502
SI-2110
SI-3115R-6
400GH3MKSRT5/8;5500
PG.
A-16
D-22
D-22
D-22
D-21
A-17
A-17
C-6
C-6
A-15
D-23
D-23
Q-7
Q-5
Q-8
Q-6
Q-12
Q-14
L-20
J-8
K-12
K-13
K-12
K-12
K-13
K-11
K-12
K-13
L-17
C-9
C-9
C-9
C-8
C-9
C-8
C-8
C-8
C-10
C-10
C-10
C-10
A-17
A-17
J-8
K-15
J-8
J-8
K-16
K-14
K-15
K-14
K-7
K-16
K-7
K-16
R-7
C-20
C-20
D-24
D-24
A-18
D-24
A-18
D-24
D-24
D-25
A-19
D-32
D-32
D-33
D-31
D-31
D-31
D-29
A-20
A-20
C-11
A-20
D-32
D-33
D-32
D-32
A-20
D-30
D-33
E-18
PRODUCT DESCRIPTION INDEX
BRAND
TOP CAT
SHINANO
ALLIANCE
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
SHINANO
TOP CAT
TOP CAT
TOP CAT
SHINANO
SHINANO
ALLIANCE
SHINANO
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
SHINANO
ALLIANCE
ALLIANCE
SHINANO
SHINANO
ALLIANCE
SHINANO
SHINANO
SHINANO
SHINANO
ALLIANCE
ALLIANCE
TOP CAT
TOP CAT
SHINANO
SHINANO
SHINANO
SHINANO
ALLIANCE
SHINANO
SHINANO
ALLIANCE
IAT
ALLIANCE
ALLIANCE
MOTOR GUARD
MOTOR GUARD
MOTOR GUARD
MOTOR GUARD
ALLIANCE
ALLIANCE
EEZER
ALLIANCE
ALLIANCE
ALLIANCE
EEZER
ALLIANCE
EEZER
EEZER
SPIRALCOOL
IAT
IAT
IAT
IAT
TOP CAT
TOP CAT
KETT
KETT
KETT
KETT
KETT
KETT
SHINANO
ALLIANCE
SHINANO
IAT
ALLIANCE
BAHCO
SHINANO
ALLIANCE
SHINANO
TRELAWNY
TRELAWNY
TRELAWNY
PART NUMBER
500H1MKT5/8;4000
SI-3018A
AL-3019
SI-3003A
SI-3013A
SI-3001A
SI-3011A
SI-3007
SI-3200AS
SI-3300
520RA2XKTKW;8000;7SP
4620RA3MKSR;4000;7SP
520RA2XKTKW;6000;9SP
SI-2050AGR
SI-2202
AL-1550
SI-2210
AL-1551
AL-1554
AL-1554K
AL-1552
SI-2201R
AL-1553
AL-1553K
SI-2210R
SI-2026
AL-1336
SI-2351
SI-2009H
SI-2008
SI-2300
AL-1513
AL-1513K
510VK;4000;7SP
56SK;6000;9SP
SI-2351W
SI-2351WM14
SI-2451W
SI-2451WM14
AL-1580W
SI-2322WR-E
SI-2107A
AL-1504
IAT-4088
AL-1506
AL-1505
SB-1
SB-3
HT-1
HT-2
AA-136A-5V
AA-136A-7V
EZ-6636KV
AA-60798
AA-60796
AA-60797
EZ-6636K
AA-60726
EZ-6636V
EZ-6636
*
IAT-7280S
IAT-4531H
IAT-4531L
IAT-4531D
510WG
662VBW;14
PS-521
PS-526
PSV-544
PSV-532
PSV-534
PS-523
SI-4300
AL-1781
SI-4700B
IAT-4504K
*
*
SI-4710
AL-1782
SI-4730
151.525
151.52
196.515
PG.
E-18
D-29
A-21
D-28
D-29
D-28
D-28
D-29
D-29
D-29
E-18
E-18
E-18
D-26
D-26
A-19
D-27
A-19
A-19
A-19
A-18
D-26
A-18
A-18
D-27
D-27
A-19
D-27
D-26
D-26
D-27
A-22
A-22
E-19
E-19
D-33
D-33
D-33
D-33
A-21
D-33
D-30
A-20
C-11
A-21
A-20
L-26
L-26
L-26
L-26
L-23
L-23
L-23
L-22
L-22
L-22
L-23
L-22
L-23
L-23
L-24
C-12
C-12
C-12
C-12
E-19
E-19
G-6
G-6
G-7
G-6
G-7
G-6
D-34
A-24
D-34
C-12
L-14
L-14
D-34
A-24
D-34
I-18
I-18
I-18
Specifications subject to change without notice. E&OE. ©
13
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION
SANDER - horizontal, drum, side exhaust, 1500W, 4000rpm
SANDER - orbital, bar handle, heavy duty, self vacuum, 1/3 sheet pad (95mm x 175mm), 7000rpm
SANDER - orbital, bar handle, self vacuum, 1/2 sheet pad (112mm x 220mm), 10000rpm
SANDER - orbital, mini, palm grip, heavy duty, hook & loop/PSA, 75mm x 100mm pad, 8000rpm
SANDER - orbital, mini, palm grip, heavy duty, self vacuum, hk & lp/PSA, 75mm x 100mm pad, 7000rpm
SANDER - orbital, mini, palm grip, lightweight, hook & loop/PSA, 75mm x 100mm pad, 9000rpm
SANDER - orbital, mini, palm grip, lightweight, self vacuum, hk & lp/PSA, 75mm x 100mm pad, 9000rpm
SANDER - orbital, palm grip, paper clips, 1/3 sheet pad (95mm x 175mm), 7500rpm
SANDER - oscillating, right angle, hook & loop, 75mm x 75mm x 70mm triangular pad, 19000rpm
SANDER - oscillating, right angle, PSA, 30mm round pad, 600opm
SANDER - right angle, 180mm, 1500W, 8000rpm
SANDER - right angle, 180mm, 900W, 4000rpm
SANDER - right angle, 230mm, 1500W, 6000rpm
SANDER - single action, mini, roll throttle, quick change, 25mm discs, 25000rpm
SANDER - single action, pistol grip, 1/4"x 20 spindle for leading brand quick change pads, 14000rpm
SANDER - single action, pistol grip, 100mm fibre discs, 22CH, 18000rpm
SANDER - single action, pistol grip, 100mm fibre discs, 22CH, 18000rpm
SANDER - single action, pistol grip, 125mm fibre discs, 22CH, composite body, 16000rpm
SANDER - single action, pistol grip, hook & loop, 75mm pad, 15000rpm
SANDER - single action, pistol grip, hook & loop, 75mm pad, 15000rpm, Kit
SANDER - single action, pistol grip, quick change, 50mm discs, 16000rpm
SANDER - single action, pistol grip, quick change, 50mm discs, 17000rpm
SANDER - single action, pistol grip, quick change, 75mm discs, 16000rpm
SANDER - single action, pistol grip, quick change, 75mm discs, 16000rpm, Kit
SANDER - single action, pistol grip, quick change, 75mm discs, 18000rpm
SANDER - single action, right angle, 125mm plastic back-up pad, 125mm fibre discs, 22CH, 5000rpm
SANDER - single action, right angle, 125mm sanding, polishing & surface conditioning discs, 16CH, 10000rpm, Kit
SANDER - single action, right angle, 178mm plastic back-up pad, 180mm fibre discs, 22CH, 4500rpm
SANDER - single action, right angle, hook & loop, 75mm pad, 5000rpm
SANDER - single action, right angle, mini, hook & loop, 50mm pad, 13000rpm
SANDER - single action, vertical, 178mm plastic back-up pad, 180mm fibre discs, 22CH, 4000rpm
SANDER - straight line, 4000spm
SANDER - straight line, 4000spm Kit
SANDER - vertical, 180mm, 5/8"Whit., alum. body, side exhaust, 1125W, 4000rpm
SANDER - vertical, 230mm, 5/8"Whit., alum. body, side exhaust, 2250W, 6000rpm
SANDER - wet, single action, r/angle, hollow spindle, centre w/feed, 5/8"- 11 spindle, no pad, 4500rpm
SANDER - wet, single action, r/angle, hollow spindle, centre w/feed, M14 x 2 spindle, no pad, 4500rpm
SANDER - wet, single action, r/angle, hollow/sp., centre w/feed, slow, 5/8"- 11 spindle, no pad, 2300rpm
SANDER - wet, single action, r/angle. hollow/sp., centre w/feed. Slow, M14 x 2 spindle, no pad, 2300rpm
SANDER - wet, single action, right angle, hollow spindle, centre water feed, 75mm pad, 4000rpm
SANDER - wet, single action, right angle, hollow spindle, centre water feed, 80mm pad - extra, 5000rpm
SANDER/POLISHER - dual action, mini, right angle, hook & loop, 3mm orbit, 48mm pad, 8500rpm
SANDER/POLISHER - geared head, bar handle, 2.5mm orbit, 150mm pad, 900rpm
SANDER/POLISHER - geared head, bar handle, 200mm pad, 850rpm
SANDER/POLISHER - geared head, bar handle, central vacuum, 2.5mm orbit, 150mm pad, 900rpm
SANDER/POLISHER - geared head, bar handle, self vacuum, 2.5mm orbit, 150mm pad, 900rpm
SANDING BLOCK - for hand sanding, 130x65x13mm thick, soft, pack of 1
SANDING BLOCK - for hand sanding, 130x65x13mm thick, soft, pack of 3
SANDING BLOCK - for hand sanding, 130x65x20mm thick, semi rigid, perforated, pack of 1
SANDING BLOCK - for hand sanding, 130x65x20mm thick, semi rigid, perforated, pack of 2
SANDING PAD - disc, 125mm dia, 5/8"-11 female thread, hook & loop face, plastic
SANDING PAD - disc, 180mm dia, 5/8"-11 female thread, hook & loop face, plastic
SANDING PAD - orbital, 150mm dia, 5/16"-24 male thr, hook & loop face, 6 hole, perimeter ducts, made in U.S.A.
SANDING PAD - orbital, 150mm dia, 5/16"-24 male thread, hook & loop face, 52 hole pattern
SANDING PAD - orbital, 150mm dia, 5/16"-24 male thread, hook & loop face, 6 hole pattern
SANDING PAD - orbital, 150mm dia, 5/16"-24 male thread, hook & loop face, 7 hole pattern
SANDING PAD - orbital, 150mm dia, 5/16"-24 male thread, hook & loop face, no holes, made in U.S.A.
SANDING PAD - orbital, 150mm dia, 5/16"-24 male thread, vinyl face, 6 hole pattern
SANDING PAD - orbital, 150mm dia, 5/16"-24 male thread, vinyl face, 6 hole pattern, made in U.S.A.
SANDING PAD - orbital, 150mm dia, 5/16"-24 male thread, vinyl face, no holes, made in U.S.A.
SANDING PAD - spiral ribbed rubber sanding pads and accessories
SAW - circular, 180mm, 4500rpm
SAW - circular, 50mm, 3500rpm
SAW - circular, 50mm, 620rpm
SAW - circular, 50mm, 7000rpm
SAW - circular, abrasive/diamond, 230mm, 1125W, 4000rpm
SAW - circular, abrasive/diamond, 360mm, 3000W, 3300rpm
SAW - circular, mini, panel cutting, pistol grip, plastic, aluminium, sheet steel, 6mm max. depth, 2200rpm
SAW - circular, mini, panel cutting, pistol grip, depth gauge, auto body shops, 10mm max. depth, 2200rpm
SAW - circular, mini, panel cutting, pistol grip, plywood, laminate etc, 27mm max, depth, 2200rpm
SAW - circular, mini, panel cutting, pistol grip, vacuum head for dust, 16mm max. depth, 2200rpm
SAW - circular, mini, panel cutting, pistol grip, vacuum head for dust, 27mm max, depth, 2200rpm
SAW - circular, mini, variable speed, pistol grip, timber & composite panels, 16mm max. depth, 2200rpm
SAW - oscillating, 63mm steel blade, depth gauge for 2, 4 or 6mm cuts, 20000spm
SAW - reciprocating, 1.6mm mild steel, 10mm stroke, 10000spm
SAW - reciprocating, 3mm mild steel, 10mm stroke, 10000spm
SAW - sabre, 300mm blade, 45mm stroke, Kit
SAW BLADES - for reciprocating saws, bi-metal, 14, 18, 24 & 32TPI, packs of 10
SAW BLADES - for reciprocating saws, bi-metal, Swedish, 18, 24 & 32TPI, packs of 10
SAW/FILE - reciprocating, 3mm mild steel, 10mm stroke, 10000spm, 5mm opening for minature files
SAW/FILE - reciprocating, 3mm mild steel, 10mm stroke, 5000spm, takes minature files
SAW/FILE - reciprocating, 5mm mild steel, 8mm stroke, 6000spm, vane motor, 5mm opening for mini files
SCABBLER - single head, bush hammer head, 2400bpm
SCABBLER - single head, cruciform head, 2400bpm
SCABBLER - single head, low vibration, bush hammer head, 3000bpm
W-13
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION INDEX
14
W-14
PRODUCT DESCRIPTION
SCABBLER - single head, low vibration, cruciform head, 3000bpm
SCABBLER - triple head, back handle, bush hammer heads, 3 x 2800bpm
SCABBLER - triple head, bush hammer head, 3 x 2400bpm
SCABBLER - triple head, cruciform head, 3 x 2400bpm
SCABBLER - triple head, low vibration, bush hammer head, 3 x 3000bpm
SCABBLER - triple head, low vibration, cruciform head, 3 x 3000bpm
SCABBLER ACCESSORIES - Head, Screw thread fi t (heavy duty) – TCT Bush hammer tip
SCABBLER ACCESSORIES - Head, Screw thread fi t (heavy duty) – TCT Cruciform tip
SCABBLER ACCESSORIES - Single piece piston (heavy duty) – TCT Bush hammer tip
SCABBLER ACCESSORIES - Single piece piston (heavy duty) – TCT Cruciform tip
SCABBLER ACCESSORIES - Vacuum Shroud - Single Head
SCABBLER ACCESSORIES - Vacuum Shroud - Triple Head
SCALER - long reach, 'Lite', 16mm hexagon shank chisel holder, 120cm long, 2200bpm
SCALER - long reach, 'Lite', 16mm hexagon shank chisel holder, 150cm long, 2200bpm
SCALER - long reach, 'Lite', 16mm hexagon shank chisel holder, 180cm long, 2200bpm
SCALER - long reach, 16mm haxagon shank chisel holder, 180cm long, 2200bpm
SCALER - long reach, 16mm hexagon shank chisel holder, 120cm long, 2200bpm
SCALER - long reach, 16mm hexagon shank chisel holder, 150cm long, 2200bpm
SCALER - long reach, 16mm hexagon shank chisel holder, 60cm long, 2200bpm
SCALER ACCESSORIES - 100mm wide x 203mm long asphalt cutter chisel, 5/8" hexagon shank
SCALER ACCESSORIES - 100mm wide x 203mm long cranked floor tile removal chisel, 5/8" hexagon shank
SCALER ACCESSORIES - 100mm wide x 203mm long spark resistant aluminium bronze chisel, 5/8" hexagon shank
SCALER ACCESSORIES - 203mm long scutch comb holder, 5/8" hexagon shank
SCALER ACCESSORIES - 25mm wide x 229mm long flat chisel for sand cast chipping, 5/8" hexagon shank
SCALER ACCESSORIES - 35mm wide x 280mm long cranked ceramic tile removal, flux chipper, chisel, 5/8" hexagon shank
SCALER ACCESSORIES - 38mm wide scutch comb insert for above holder
SCALER ACCESSORIES - 50mm wide x 229mm long linoleum removing chisel, 5/8" hexagon shank
SCALER ACCESSORIES - 50mm wide x 229mm long spark resistant aluminium bronze chisel, 5/8" hexagon shank
SCALING HAMMER - single head, bush hammer head, 3000bpm
SCALING HAMMER - single head, cruciform head, 3000bpm
SCALING HAMMER - single head, low vibration, bush hammer head, 3000bpm
SCALING HAMMER - single head, low vibration, cruciform head, 3000bpm
SCALING HAMMER - triple head, low vibration, optional side handle, bush hammer heads, 3 x 3000bpm
SCALING HAMMER - triple head, low vibration, optional side handle, cruciform heads, 3 x 3000bpm
SCALING HAMMER - triple head, optional side handle, bush hammer heads, 3 x 2400bpm
SCALING HAMMER - triple head, optional side handle, cruciform heads, 3 x 2400bpm
SCALING HAMMER ACCESSORIES - Cutter Head (standard duty) – Beryllium copper cruciform tip
SCALING HAMMER ACCESSORIES - Cutter head (standard duty), TCT bush hammer tip
SCALING HAMMER ACCESSORIES - Cutter Head (standard duty), TCT cruciform tip
SCARIFIER - hand held, 240V electric, 50mm cutting width, for use with abrasive flaps
SCARIFIER - hand held, pneumatic, 100mm cutting width, for use with abrasive flaps
SCARIFIER - hand held, pneumatic, 100mm cutting width, for use with cutters
SCARIFIER - hand held, pneumatic, 50mm cutting width, for use with abrasive flaps
SCARIFIER - hand held, pneumatic, 50mm cutting width, for use with cutters
SCARIFIER ACCESSORIES - C type flaps
SCARIFIER ACCESSORIES - Hub for cutters, 100mm
SCARIFIER ACCESSORIES - Hub for cutters, 50mm
SCARIFIER ACCESSORIES - Hub with pins, 100mm, for C type flaps
SCARIFIER ACCESSORIES - Hub with pins, 50mm, for C type flaps
SCARIFIER ACCESSORIES - Quality carbon steel beam cutters
SCARIFIER ACCESSORIES - Quality carbon steel star cutters
SCRAPER - long reach, 'Lite', 16mm hexagon shank blade holder, 120cm long, 2200bpm
SCRAPER - long reach, 'Lite', 16mm hexagon shank blade holder, 150cm long, 2200bpm
SCRAPER - long reach, 'Lite', 16mm hexagon shank blade holder, 180cm long, 2200bpm
SCRAPER - long reach, 16mm hexagon shank blade holder, 120cm long, 2200bpm
SCRAPER - long reach, 16mm hexagon shank blade holder, 150cm long, 2200bpm
SCRAPER - long reach, 16mm hexagon shank blade holder, 180cm long, 2200bpm
SCRAPER - long reach, 16mm hexagon shank blade holder, 60cm long, 2200bpm
SCRAPER - reciprocating, 27mm blade width, 400spm
SCRAPER ACCESSORIES - 102mm wide bevelled edge scraper blade with 5/8" hexagon shank blade holder
SCRAPER ACCESSORIES - 102mm wide bevelled edge scraper blade, pack of 10 blades
SCRAPER ACCESSORIES - 102mm wide square edge scraper blade with 5/8" hexagon shank blade holder
SCRAPER ACCESSORIES - 102mm wide square edge scraper blade, pack of 10 blades
SCRAPER ACCESSORIES - 203mm wide bevelled edge scraper blade with 5/8" hexagon shank blade holder
SCRAPER ACCESSORIES - 203mm wide bevelled edge scraper blade, pack of 10 blades
SCRAPER ACCESSORIES - 203mm wide square edge scraper blade with 5/8" hexagon shank blade holder
SCRAPER ACCESSORIES - 203mm wide square edge scraper blade, pack of 10 blades
SCRAPER ACCESSORIES - 305mm wide bevelled edge scraper blade with 5/8" hexagon shank blade holder
SCRAPER ACCESSORIES - 305mm wide bevelled edge scraper blade, pack of 10 blades
SCRAPER ACCESSORIES - 305mm wide square edge scraper blade with 5/8" hexagon shank blade holder
SCRAPER ACCESSORIES - 305mm wide square edge scraper blade, pack of 10 blades
SCRAPER ACCESSORIES - 5/8" hexagon shank blade holder only
SCREW COUNTER - fastening monitor for air screwdrivers
SCREWDRIVER - 30Volt DC electric, straight grip, auto shut-off, 2.9Nm, 5mm capacity, 1000rpm
SCREWDRIVER - 40Volt DC electric, str. grip, auto shut-off, 15.0Nm, 8mm capapacity, 550rpm
SCREWDRIVER - angle head, auto shut-off, 17.6Nm, 9mm capacity, 300rpm
SCREWDRIVER - angle head, auto shut-off, 9.3Nm, 7mm capacity, 550rpm
SCREWDRIVER - oil pulse, pistol grip, auto shut-off, 28Nm, 10mm capacity, 7400rpm
SCREWDRIVER - pistol grip, 1/4" hex. dr., 1800rpm
SCREWDRIVER - pistol grip, 1/4" hex. dr., 800rpm
SCREWDRIVER - pistol grip, adjustable slip clutch, reversible, 6mm capacity, 2000rpm
SCREWDRIVER - pistol grip, adjustable slip clutch, reversible, 8mm capacity, 800rpm
SCREWDRIVER - pistol grip, auto shut-off, 17.6Nm, 9mm capacity, 300rpm
SCREWDRIVER - pistol grip, auto shut-off, 3.4Nm, 5mm capacity, 1800rpm
SCREWDRIVER - pistol grip, auto shut-off, 4.9Nm, 6mm capacity, 1000rpm
Specifications subject to change without notice. E&OE. ©
BRAND
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
ALLIANCE
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
IAT
IAT
IAT
IAT
IAT
IAT
ALLIANCE
ALLIANCE
SHINANO
SHINANO
IAT
IAT
IAT
PART NUMBER
196.51
153.605
153.525
153.52
153.6075
153.607
426.5353
426.5356
612.5325
612.532
437.51
437.53
136.3498C
136.3598C
136.3698C
137.3600C
137.3400C
137.3500C
137.3200C
705.1102
705.2102
705.1112
708.11
705.1101
705.21
708.1101
705.1106
705.11
151.5105
151.51
196.5105
196.5095
153.6175
153.617
153.5305
153.53
606.5363
426.5352
426.5351
194.122
194.0405
194.C205
194.0205
194.C205
312.MRPC
438.0409
438.0209
438.0405
438.0205
312.R200
312.S200
136.3498S
136.3598S
136.3698S
136.3400S
136.3500S
136.3600S
136.3200S
AL-4203
431.3904
439.3524
431.3504
439.3504
431.3908
439.3528
431.3508
439.3508
431.3912
439.3522
431.3512
439.3512
641.3512
IAT-7540
IAT-5675SE
IAT-5685SE
IAT-5265A
IAT-5260A
IAT-7020
AL-1214
AL-1215
SI-1166A
SI-1166-8A
IAT-5465P
IAT-5441P
IAT-5447P
PG.
I-18
I-19
I-18
I-18
I-19
I-19
I-19
I-19
I-19
I-19
I-19
I-19
I-31
I-31
I-31
I-31
I-31
I-31
I-31
I-33
I-33
I-33
I-33
I-33
I-33
I-33
I-33
I-33
I-29
I-29
I-29
I-29
I-29
I-29
I-29
I-29
I-30
I-30
I-30
I-8
I-8
I-8
I-8
I-8
I-9
I-9
I-9
I-9
I-9
I-9
I-9
I-31
I-31
I-31
I-31
I-31
I-31
I-31
A-24
I-32
I-32
I-32
I-32
I-32
I-32
I-32
I-32
I-32
I-32
I-32
I-32
I-32
C-16
C-15
C-15
C-14
C-14
C-16
A-25
A-25
D-35
D-35
C-15
C-15
C-15
PRODUCT DESCRIPTION INDEX
BRAND
IAT
SHINANO
IAT
IAT
SHINANO
SHINANO
SHINANO
IAT
IAT
IAT
IAT
IAT
ALLIANCE
PART NUMBER
IAT-5455P
SI-5305AQC
IAT-5311P
IAT-5310P
SI-1140
SI-1161
SI-1130A
IAT-5065S
IAT-5045S
IAT-5050S
IAT-5006S
IAT-5060S
H320D
PG.
C-15
D-35
C-14
C-14
D-35
D-35
D-35
C-14
C-13
C-13
C-13
C-14
L-16
SEALANT BLADE - 90°, 90mm long
SEALANT BLADE - straight, 35mm long
SEALANT BLADE - straight, offset, 57mm long
SEALANT BLADE - straight, offset, 90mm long
SEALANT KNIFE - oscillating action, 19000spm
SHEAR - double cut, 0.9mm mild steel, straight grip, 2600rpm
SHEAR - double cut, 1.6mm mild steel, head only, 200mm minimum cut radius
SHEAR - double cut, 1.6mm mild steel, pistol grip, 200mm minimum cut radius, 2600spm
SHEAR - double cut, 1.9mm mild steel, pistol grip, heavy duty, 200mm min. cut radius, 2000spm
SHEAR - double cut, 13mm fibre cement, pistol grip, 40mm minimum cut radius, 2000spm
SHEAR - double cut, 2.1mm mild steel, pistol grip, heavy duty, 1800spm
SHEAR - double cut, fibre cement sheet, 13mm capacity, pistol grip, 1800spm
SHEAR - double cut, fibre cement sheet, 13mm capacity, pistol grip, heavy duty, 1800spm
SHEAR - scissor, 3.2mm plastic, wire mesh, rubber, pistol grip, heavy duty, 1800spm,
SHEAR - scissor, metal foil, plastic, wire mesh, rubber, pistol grip, stationary bottom blade, 1800spm,
SHEAR - scissor, metal foil, plastic, wire mesh, rubber, pistol grip, stationary top blade, 1800spm,
SHEAR - scissor, pliable sheet material, pistol grip, fi xed bottom blade, 40mm min. radius, 2000spm
SHEAR - single cut, 1.6mm mild steel, pistol grip, 40mm min. cut radius, 2600spm
SHEET METAL CUTTER - 10.2mm round shank
SHEET METAL CUTTER - 10.2mm round shank
SHEET METAL PUNCH - 10.2mm round shank
SHEETS - abrasive, hook & loop, 75 x 110mm, 40, 60, 80, 120, 180, 240, 320, grit, for general purpose timber work
SHOCK ABSORBER CHISEL - 10.2mm round shank
SHUT-OFF VALVES - "Olympian Plus" plug-in system, 3/4" & 1"FBSP
SHUT-OFF VALVES- "Excelon" modular system, 1/4", 3/8", 1/2", 3/4"FBSP
SILENCERS - sintered copper, 1/8”, 1/4", 3/8"MBSP
SMOOTHING TOOL - 10.2mm round shank
SPEED REGULATOR - in-line, 1/4"BSP
SPEED REGULATOR - in-line, 1/4"BSP, fine adjustment
SPINDLE ADAPTOR - 5/8"-11F to M14x2.0M
SPINDLE ADAPTOR - 7/16"-20F to 1/4"-20M (EZ-LOK)
SPINDLE ADAPTOR - 7/16"-20F to TRIMCUT
SPOT MILL - pistol grip, 8mm collet, 2000rpm
SPOT MILL - straight grip, 8mm collet, 1600rpm
SPOT WELD BREAKER - 10.2mm round shank
SPRAY GUN - finishing, professional quality
SPRAY GUN - high efficiency, gravity feed
SPRAY GUN - high production, suction pot
SPRAY GUN - touch-up, gravity feed
SPRAY GUN - underbody
STAPLER - 6000 series, 10-25mm
STAPLER - 800 series, 6-16mm
STAPLES - for AT-3302 & AT-3330
STEEL FITTINGS - gal. steel, barbed hose tails, screwed nipples, bushes, sockets
STONE HAMMER - pistol grip, 5.0kg, pyramidal chuck
STONE HAMMER - straight, 0.5kg, 12.5mm round x 60mm chuck
STONE HAMMER - straight, 0.8kg, 12.5mm round x 60mm chuck
STONE HAMMER - straight, 1.6kg, 12.5mm round x 60mm chuck
STRAIGHT BUSHING REMOVER - 10.2mm round shank
STRAIGHT PUNCH - 10.2mm round shank
STRIPPING WHEEL - 115mm diameter, for IAT-6042 & IAT-6044
SWIVEL - tool inlet, 1/4"BSP
SWIVEL - tool inlet, 3/8"BSP
SWIVEL CONNECTORS -UniSwivel - 1/4”, 3/8", 1/2", 3/4" & 1" FBSP Thread
TAIL PIPE CUTTER - 10.2mm round shank
TAMPER / COMPACTOR - for backfill, 146mm dia std butt, 38mm bore, 140mm stroke, 670bpm, 16.8kg, 1310mm long
TAPER PUNCH - 10.2mm round shank
TAPPER - pistol grip, M12 capacity, 250rpm
TAPPER - pistol grip, M12, 220rpm forward, 470rpm reverse, automatic reversing
TAPPER - straight grip, M12 capacity, 400rpm
TAPPING MACHINE - arm mounted, M12 capacity, 400rpm
TERMINAL INSERTER
THREAD TAPE - Teflon, 12mm x 10m roll
TIE ROD TOOL - 10.2mm round shank
TIGHTENING MANAGEMENT SYSTEMS - digitalised, for electric screwdrivers, 50, 60 & 75Watt models
TOOL BALANCERS - cable suspension, spring return, 0.4–4.0kg capacity, 1600 to 2000mm cable lengths
TOOL BALANCERS - cable suspension, spring return, 25.0–75.0kg capacity, 2000mm cable length
TOOL BALANCERS - cable suspension, spring return, 4.0–25.0kg capacity, 2000 to 2500mm cable lengths
TOOL BALANCERS - cable suspension, spring return, 75.0–180.0kg capacity, 2000 to 3000mm cable lengths
TOOL BALANCERS - hose suspension, spring return, 0.75-2.5kg capacity, 1350mm hose length
TOOL HOLDER - rotating, for IAT-6530A Tapping Machine
TRENCH DIGGER - 17kg, 22 x 82mm chuck, 44.5mm bore, 85.7mm stroke, 2400bpm, 16.7kg
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
SHINANO
ALLIANCE
SHINANO
SHINANO
SHINANO
SHINANO
KETT
KETT
KETT
KETT
KETT
KETT
SHINANO
SHINANO
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
NORGREN
NORGREN
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
SHINANO
SHINANO
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
ALLIANCE
ALLIANCE
IAT
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
APT
ALLIANCE
IAT
FIAM
IAT
IAT
FIAM
ALLIANCE
ALLIANCE
IAT
TECNA
TECNA
TECNA
TECNA
TECNA
IAT
APT
H320E
H320C
H320A
H320B
SI-3200AK
AL-1953
SI-45
SI-4500
SI-5300PS
SI-5300FC
P-540
P-592
P-593
P-541
P-580
P-570
SI-5300SS
SI-5500E
AA-807
AA-816
AA-819
*
AA-824
*
*
*
AA-821
AA-5011
AA-5012
D44
D42
D43
SI-5850A
SI-5800
AA-815
AL-1070
AL-1020
AL-1018
AL-1008
AL-1015
AT-3330
AT-3302
*
*
PT-050
PT-005
PT-008
PT-016
AA-804
AA-822
IAT-6111
AA-5922
AA-5923
*
AA-802
APT-131
AA-812
IAT-6550P
MAY-12P
IAT-6512S
IAT-6522K
IP900
TT1210
AA-801
IAT-5521
*
*
*
*
*
IAT-6530A
APT-119
L-16
L-16
L-15
L-16
D-36
A-25
D-36
D-36
D-37
D-36
G-4
G-5
G-5
G-4
G-5
G-5
D-36
D-37
L-17
L-18
L-18
L-4
L-19
Q-13
Q-9
P-15
L-18
L-21
L-21
L-21
L-21
L-21
D-37
D-37
L-18
A-26
A-26
A-26
A-26
A-26
A-27
A-27
A-27
P-12
J-7
J-7
J-7
J-7
L-16
L-18
C-20
L-21
L-21
P-11
L-16
K-17
L-17
C-21
R-17
C-21
C-21
R-17
P-14
L-16
C-18
M-3
M-5
M-4
M-6
M-3
C-21
K-17
Specifications subject to change without notice. E&OE. ©
15
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION
SCREWDRIVER - pistol grip, auto shut-off, 7.3Nm, 7mm capacity, 550rpm
SCREWDRIVER - pistol grip, no clutch, reversible, 5mm capacity, 2000rpm
SCREWDRIVER - pistol grip, slip clutch, ext, adj., 12Nm, 8mm capacity, 800rpm
SCREWDRIVER - pistol grip, slip clutch, ext. adj., 9Nm, 6mm capacity, 1800rpm
SCREWDRIVER - straight grip, adjustable slip clutch, lever start, reversible, 4mm capacity, 1700rpm
SCREWDRIVER - straight grip, adjustable slip clutch, lever start, reversible, 6mm capacity, 1600rpm
SCREWDRIVER - straight grip, adjustable slip clutch, push start, reversible, 3mm capacity, 2000rpm
SCREWDRIVER - straight grip, auto shut-off, 17.6Nm, 9mm capacity, 300rpm
SCREWDRIVER - straight grip, auto shut-off, 3.9Nm, 6mm capacity, 800rpm
SCREWDRIVER - straight grip, auto shut-off, 4.9Nm, 6mm capacity, 800rpm
SCREWDRIVER - straight grip, auto shut-off, 8.0Nm, 5mm capacity, 1800rpm
SCREWDRIVER - straight grip, auto shut-off, 9.3Nm, 7mm capacity, 550rpm
SEALANT BLADE - 90°, 63mm long
W-15
PRODUCT DESCRIPTION INDEX
PRODUCT DESCRIPTION INDEX
16
W-16
PRODUCT DESCRIPTION
TRIANGLES - abrasive, hook & loop, 70 x 75 x 75mm, 40, 60, 80, 150, 240 grit, for general purpose timber work
TRIMMER/ROUTER - laminate, 1/4" collet, 22000rpm, adjustable guides
TYRE BUFF - straight grip, quick change mandrel, polymer body cover, 2600rpm
TYRE INFATOR - digital display, clip-on
TYRE INFLATOR - clip-on, multi-scale gauge, deflator button
TYRE INFLATOR - dual chuck, fully calibrated driveway model
TYRE INFLATOR - dual chuck, heavy duty
VACUUM SHROUD - for 2B & 2BPG
VACUUM SHROUD - for 3BPG
VACUUM UNIT - Model KA/DT, drum top
VACUUM UNIT - Model KAV30, dry, 30 litre drum,
VACUUM UNIT - Model KAV30/WD, wet & dry, 30 litre drum
VACUUM UNIT ACCESSORIES - 14” permaflow filter, for drum top vacuum units
VACUUM UNIT ACCESSORIES - 14”antistatic filter assembly for standard vacuum units
VACUUM UNIT ACCESSORIES - 14”permaflow filter for standard vacuum units
VACUUM UNIT ACCESSORIES - 14”wet-use float assembly for standard units
VACUUM UNIT ACCESSORIES - 38mm antistatic dry tool kit for standard vacuum units
VACUUM UNIT ACCESSORIES - 38mm antistatic wet tool kit
VACUUM UNIT ACCESSORIES - 38mm multi purpose tool with brushes for standard vacuum units
BRAND
ALLIANCE
SHINANO
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
ALLIANCE
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
PART NUMBER
*
SI-2018A
AL-1213
AL-3405
AL-3400
AL-3404
AL-3403
418.2199
418.3039
303.10KA/DT
303.10KAV30/D
303.10KAV30/WD
303.1035
303.1025/AS
303.1035
303.1050/AS
303.1085/AS
303.1095/AS
303.11
PG.
L-4
D-38
A-27
A-28
A-28
A-28
A-28
I-26
I-26
I-39
I-39
I-39
I-41
I-40
I-40
I-40
I-40
I-40
I-40
VACUUM UNIT ACCESSORIES - 38mm stainless steel double taper tube for joining hoses for standard vacuum units
VACUUM UNIT ACCESSORIES - 38mm x 125mm dusting brush for standard vacuum units
VACUUM UNIT ACCESSORIES - 38mm x 125mm dusting brush, for drum top vacuum units
VACUUM UNIT ACCESSORIES - 38mm x 3 metre antistatic hose for standard vacuum units
VACUUM UNIT ACCESSORIES - Drum top adaptor, for drum top vacuum units
VACUUM UNIT ACCESSORIES - Float assembly for wet use, for drum top vacuum units
VACUUM UNIT ACCESSORIES - HEPA filter module for standard vacuum units
VACUUM UNIT ACCESSORIES - HEPA* filter, for drum top vacuum units
VACUUM UNIT ACCESSORIES - K4 disposable bags, pack of 10, for standard vacuum units
VACUUM UNIT ACCESSORIES - K6 paper filter, pack of 10, for standard vacuum units
VACUUM UNIT ACCESSORIES - Motor head, for drum top vacuum units
VACUUM UNIT ACCESSORIES - Standard filter, for drum top vacuum units
VACUUM UNIT ACCESSORIES - Wet & dry tool kit, for drum top vacuum units
VACUUM/BLOWER - quick change lever
VIBRATOR - concrete, 30mm head dia, 4kg head weight, 20000vpm, 980N force
VIBRATOR - concrete, 40mm head dia, 5kg head weight, 19000vpm, 1961N force
VIBRATOR - concrete, 50mm head dia, 6kg head weight, 17500vpm, 3432N force
VIBRATOR - concrete, 60mm head dia, 7.5kg head weight, 17500vpm, 4903N force
VIBRATOR - concrete, 80mm head dia, 13kg head weight, 16500vpm, 11768N force
VIBRATOR - concrete,100mm head dia, 18kg head weight, 15000vpm, 14710N force
VIBRATORS - concrete, 115mm & 140mm dia heads
VIBRATORS - roller, 19572N to 57827N force
VIBRATORS - roller, 7340N to 15500N force
WALL MOUNTS - "Excelon" modular system
WIRE WHEELS - 0.50, 0.55 & 0.70mm wire, for IAT-6042 & IAT-6044
YOKES - "Olympian Plus" plug-in system, single, double & triple mount, 3/4" & 1" FBSP connection
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
TRELAWNY
ALLIANCE
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
PNEUTECH
MISC
MISC
MISC
NORGREN
IAT
NORGREN
303.111
303.1105/AS
303.1105/AS
303.1075/AS
303.0014A
303.1050/AS
303.106
303.106
303.1005
303.103
303.10KA
303.1025/AS
303.1095/WD
AL-1620
PT-1030
PT-1040
PT-1050
PT-1060
PT-1080
PT-1100
*
*
*
*
IAT-6114
*
I-40
I-40
I-41
I-40
I-41
I-41
I-40
I-41
I-40
I-40
I-41
I-41
I-41
A-28
J-9
J-9
J-10
J-10
J-10
J-10
R-16
R-19
R-18
Q-9
C-20
Q-12
Specifications subject to change without notice. E&OE. ©
Contents
A
Alliance Air Tools
A-1 – A-28
B
Kuani - Impact Wrenches
B-1 – B-8
C
I.A.T. Air Tools
C-1 – C-22
D
Shinano Air Tools
D-1 – D-40
E
Top Cat Air Tools
E-1 – E-22
F
American Assembly Tools Nut Runners
F-1 – F-8
G
Kett Cutting Tools
G-1 – G-8
H
Rotabroach Hole Cutting Systems
H-1 – H-14
I
Trelawny Surface Preparation Equipment
I-1 – I-44
J
Pneutech Construction Tools
J-1 – J-10
K
American Pneumatic Construction Tools
K-1 – K-18
L
Alliance Abrasives & Accessories
L-1 – L-26
M
Tecna Spring Balancers
M-1 – M-6
N
Chieftain Carbide Burrs
N-1 – N-10
O
Pneutech Air Compressors
O-1 – O-20
P
Alliance Air Hose & Fittings
P-1 – P-16
Q
Air Preparation Equipment
Q-1 – Q-18
R
Miscellaneous Air Tools & Equipment
R-1 – R-20
S
Technical Notes & Tables
S-1 – S-8
T
Notes On Compressed Air
T-1 – T-10
U
Terms And Conditions Of Trade
U-1 – U-4
V
Part Number Index
V-1 – V-10
W
Product Description Index
W-1 – W-18
Your Local Distributor