®
Royal Series
Redefining the home, one door at a time...
2
®
Index
Neuma Benefits
Neuma Advantage
Pg. 4
Products
Neuma Hinged Series
Pg. 8
Neuma Gliding Series
Pg. 30
Neuma Transoms
Pg. 42
Design Options
Finish Options
Pg. 48
Hardware Options
Pg. 50
Impact Options
Pg. 52
Glazing Options
Pg. 53
Decorative Glass Options
Pg. 54
Blinds Between Glass Options Pg. 56
Grill Between Glass Options
Pg. 58
Simulated Divided Light Options Pg. 58
Brick Molding Options
Pg. 58
Screen Options
Pg. 59
Guides
Handing Guide
Pg. 61
Paint Guide
Pg. 62
Stain Guide
Pg. 63
Maintenance Guide
Pg. 64
Door Specifications
Pg. 66
Test Information
Pg. 67
Warranty
Pg. 72
*** Colors and finishes in this publication are
not actual representations.
3
Neuma
benefits
THE NEUMA ADVANTAGE
4
R
Seamless integration of sophisticated style, intelligent
design, and unprecedented quality defines a Neuma
Door.
Neuma Doors is the industry leader in quality and
innovative design of fiberglass and composite doors,
backed by the strength and expertise of Nan Ya Plastics Corp. USA. With extensive experience in creative
design and production technology, quality control is
built into each step of production. Nan Ya Plastics
has been awarded with ISO 9001 and ISO14001
certifications, which represent internationally recognized sets of standards in quality and environmental
management systems.
Vertical integration and ISO certification means that
every step of the production cycle, from the manufacture of the raw materials to the final door assembly, incorporates stringent quality control measures.
This tightly controlled comprehensive approach to
production allows Neuma Doors to ensure a lifetime
of dependability for each door system we sell.
Whether your patio door is the gateway to backyard
recreation and relaxation, or a busy access point to
your home, Neuma’s blend of function and style will
provide years of enjoyment with minimal maintenance.
“DOORS SHOWN WITH AFTERMARKET PAINTED FINISH. ALL
COLORS IN THE CATALOG ARE COMPUTER GENERATED
IMAGES AND HAVE BEEN REPLICATED AS ACCURATELY AS
POSSIBLE. ”
5
the neuma advantage
Every Neuma Door is crafted from the highest quality composite fiberglass with Hydroshield Technology creating the best combination of performance,
durability, security and appearance.
Neuma Door systems are precision engineered to
provide protection against water infiltration. The
specially engineered composite material will never
absorb water, eliminating the problems commonly
associated with wood and metal doors. Enjoy the
look and feel of a traditional wood door without
concern about rotting, splintering, warping, rusting,
mold, mildew or delamination.
Neuma Doors is a conscious steward of the environment. Our doors contain recycled material and do
6
H ydro
Sh
ield
For advanced moisture protection
and maximum durability.
not contain any CFC’s. As an ENERGY STAR qualified door, you will enjoy energy savings as well as a
comfortable indoor climate.
A Neuma Door will look great now and for years to
come. With minimal maintenance, a simple wipe
down and attention to the hardware every now and
then will do, leaving you with more time for the
things you enjoy.
Features
The Neuma Door system is ready to install and provides complete protection
from the elements. Doors and frames are enginered to work together to withstand
use in the harshest enviroments.
7
Hinged
series
FE ATURES
•Panels and frames made of composite material with
Hydroshield Technology for advanced moisture
protection and maximum durability
•Durable fiberglass skins will not rust, dent, split or rot
•Energy Star Certified in all 50 States
•Durable CFC free polyurethane foam panel core
•Stainless steel hinges
•Removable glazing bead for easy glass replacement
•Door heights available in 6’-8”, 6’-11”, 7’-6” and 8’-0” sizes
•Frames available in 4-9/16” or 6-9/16” sizes
•Thresholds include drainage systems to channel water away from doors
•Paintable smooth surface is standard with options
for stainable wood textured surface
•Doors tested for structural stability, water infiltration,
air infiltration, forced entry, and energy efficiency.
Standard Features Chart
9
full lite single &
double
Height
6’-8”, 6’-11”, 7’-6” and 8’-0”
Single Hinged Width
2’-0”, 2’-6”, 2’-8” and 3’-0”
Double Hinged Width
4’-0”, 5’-0”, 5’-4” and 6’-0”
Shown with white woodgrain finish and gold brass
Royal handle set.
Shown with mahogany finish and satin nickel Royal
handle set.
SEE PAGES 20, 22 & 24 FOR UNITS AND DIMENSIONS.
11
3/4 lite single &
double
Height
“6’8”, 6’11” and 8’0”
Single Hinged Width
2’-6”, 2’-8” and 3’-0”
Double Hinged Width
5’-0”, 5’-4” and 6’-0”
Shown with golden oak
stain on mahogany
woodgrain and satin
nickel Royal handle set.
Shown with smooth white finish and brown
Tiffany handle set, 3/4 Lite with decorative glass.
*3/4 Lite door available in mahogany woodgrain texture only.
*Decorative Glass option available only for 3’0” doors.
SEE PAGES 25, 26, 27 & 28 FOR UNITS AND DIMENSIONS.
13
full lite center hinged
Height
6’-8”, 6’-11”, 7-6” and 8’-0”
Width
5’-0”, 5’-4”, 6’-0”, 7’-6”, 8’-0” and 9’-0”
Shown with white woodgrain finish and satin nickel Royal handle set.
* Units wider than 9’ are shipped KD (Knocked Down)
SEE PAGES 22, 23 & 24 FOR UNITS AND DIMENSIONS.
14
3/4 lite center
hinged
Height
6’-8”, 6’-11” and 8’-0”
Width
5’-0”, 5’-4”, 6’-0”, 7’-6”, 8’-0” and 9’-0”
Shown with smooth white finish and satin nickel
Tiffany handle set, 3/4 Lite option.
SEE PAGE 26, 27, & 28 FOR UNITS AND DIMENSIONS.
15
double & single with
grilles
Height
6’-8”, 6’-11”, 7’-6” and 8’-0”
Single Hinged Width
2’-0”, 2’-6”, 2’-8” and 3’-0”
Double Hinged Width
4’-0”, 5’-0”, 5’-4” and 6’-0”
Shown with smooth white finish and brown Royal
handle set and 15 lite simulated divided lite (SDL).
Grilles are used to visually divide the glass area of the
door for added architectural detail. Grilles Between
Glass (GBG) are aluminum grilles sealed between the
two layers of glass and offer an attractive low maintenance option. Simulated Divided Lites (SDL) are applied
directly to the glass surface and offer a more traditional
appearance. Neuma offers standard 10, 12, 15, and
18 grill patterns as well as custom grille patterns available through special order.
Shown with smooth white
finish, gold brass Tiffany
handle set and
10 lite (SDL).
SEE PAGE 20, 21, 22 & 24 FOR UNITS AND DIMENSIONS.
17
Vented
sidelight
18
Vented Sidelight Features
• Continuous head and sill, with a mullion
system design to maximize stability and ease
of installation.
• Sidelights standard with multipoint locking
system for stability and security.
Features
Height
6’-8” only
Width
6’-0” and 8’-0”
• Sidelights come standard with stationary
screens for maximum comfort. Screens are
removable for cleaning.
• No extra assembly required. Vented Sidelights door units are designed and delivered
fully assembled.
Fully operable hinged sidelights
Sidelights vents feature a craftsman style
Shown with golden oak finish, gold brass Royal handle set
and craftsman style (GBG).
thumb-turn.
Exterior
Interior
1
2
3
Shown with medium oak finish and satin nickel Royal
handle set.
SEE PAGE 29 FOR UNITS AND DIMENSIONS.
19
Hinged Series
Sidelight Sidelight
Fixed
Single
PanelPanel
Single
1’- 3/4”
1’-2 3/4”
2’-2 13/16”
1’
1’-2”
2’-2 1/16”
Standard Grille Patterns
6’-8”
13 3/8”
6’-11”
2068
20611
70”
7’-6”
7’-5 1/2”
24 1/2”
3076
8’-0”
13 3/8”
2080
DFP= Inswing
DFH= Outswing
20
units and dimensions
panel specifications
Sidelights
Fixed
Sidelight Panels
+LQJHG3DWLR'RRU)L[HG6LGHOLJKWV
Inswing
Outswing
12”
10”
10”
12”
6”
6”
10”
12”
6”
6”
4 7/16”
76 1/16”
6”
7 7/8”
7 7/8”
76 1/16”
6”
4 7/16”
10”
12”
4 7/16”
10 7/8”
10 7/8”
79 1/16”
6”
79 1/16”
6”
4 7/16”
10”
12”
10”
12”
6”
6”
6”
6”
4 7/16”
7 7/8”
7 7/8”
92 1/16”
92 1/16”
4 7/16”
Mull Kits
Hinged Outswing
5/8”
Hinged Inswing
ADA Handicap Sill
5/8”
Special Order
SA060
SA052
62
SA061
Mull Extension for
Optional
Extended Jambs
ADA Compliant
Part Number
Handing
SS91AL3
SL
SS91AR3
RS
SS91AA3
SLS,SRS
SS91BL3
SL
SS91BR3
RS
SS91BA3
SLS,SRS
SS91CL3
SL
SS91CR3
RS
SS91CA3
SLS,SRS
SS91DL3
SL
SS91DR3
RS
SS91DA3
SLS,SRS
Measurement
SA061
Mull Extension for
Optional
Extended Jambs
21
Hinged Series
Two Panel Units
Standard Grille Patterns
DFP= Inswing
DFH= Outswing
22
* 4068/40611/4080 available only through
special order.
units and dimensions
Three Panel Units
7’-4 9/16”
7’-3 13/16”
20”
9076
LEGEND
. Handing from exterior view
. Doors are not reversible
. Retractable screen available as an option
S = Stationary
R = Hinge at right side exterior view
L = Hinge at left side exterior view
DFP= Inswing
DFH= Outswing
23
Hinged Series
panel specifications
Inswing & Outswing Patio Doors
3068
2668
2868
3068
26611
28611
30611
26611
28611
30611
3076
2680
24
2880
3080
5 3/8”
23 3/4”
69 1/4”
11 1/2”
69 1/4”
23 3/4”
86 1/16”
5 3/8”
3076
2680
2880
3080
87 5/16”
2868
5 5/16”
2668
5 5/16”
Hinged Patio Door - Outswing
12 3/4”
Hinged Patio Door - Inswing
6’-11”
6’-10 1/2” (for Inswing)
6’-9 7/16 (for Outswing)
6’-10 1/2” (for Inswing)
6’-9 7/16 (for Outswing)
6’-8”
3/4 Lite Single Panel
1’-2 3/4”
1’-2”
7”
units and dimensions
8’-0”
3/4 Lite Fixed
Sidelight
8“
DFP= Inswing
DFH= Outswing
25
Hinged Series
Standard Grille Patterns
6’-10 1/2” (for Inswing)
6’-9 7/16 (for Outswing)
3/4 Lite Two Panel Units
LEGEND
. Handing from exterior view
. Doors are not reversible
. Retractable screen available as an option
26
P= Passive
S= Stationary
R= Hinge at right side exterior view
L = Hinge at left side exterior view
DFP= Inswing
DFH= Outswing
8-Lite
12-Lite
10-Lite
15-Lite
Standard Grille Patterns
6’-10 1/2” (for Inswing)
6’-9 7/16 (for Outswing)
7668
76611
7680
8068
80611
8080
LEGEND
. Handing from exterior view
. Doors are not reversible
. Retractable screen available as an option
9068
8-Lite
12-Lite
10-Lite
15-Lite
90611
units and dimensions
3/4 Lite
Three
PanelPanel
3/4
Lite
Three
9080
P= Passive
S= Stationary
R= Hinge at right side exterior view
L = Hinge at left side exterior view
DFP= Inswing
DFH= Outswing
27
Hinged Series
panel specifications
3/4 Lite Inswing & Outswing Patio Doors
28
5 1/4”
47 1/4”
5 1/4”
6 5/16”
5 1/4”
47 1/4”
79 1/4”
6 5/16”
8 1/4”
8 1/4”
5 1/4”
47 1/4”
79 1/4”
79 1/4”
5 1/4”
63 1/4”
63 1/4”
5 1/4”
4 5/8”
18 17/32”
18 17/32”
3080
12”
18 17/32”
1268
79 1/4”
5 1/4”
63 1/4”
7 1/4”
18 17/32”
93 5/16”
5 1/4”
12”
47 1/4”
6 1/4”
77 5/16”
5 1/4”
92 1/16”
63 1/4”
6 1/4”
18 17/32”
1280
30611
18 17/32”
1280
6 5/16”
18 17/32”
18 17/32”
25 1/4”
8 1/4”
18 17/32”
21 1/4”
2880
12”
5 1/16”
5 1/4”
47 1/4”
79 1/16”
5 1/4”
76 1/16”
7 1/4”
8 1/16”
1268
6 1/4”
25 1/4”
Hinged Patio Door Sidelights - Outswing
12”
5 1/16”
47 1/4”
6 1/4”
4 5/8”
6 5/16”
47 1/4”
6 5/16”
5 1/4”
47 1/4”
8 1/4”
6 5/16”
2680
47 1/4”
12”
4 5/8”
18 17/32”
Hinged Patio Door Sidelights - Inswing
12”
28611
5 1/4”
19 1/4”
18 17/32”
3068
18 17/32”
63 1/4”
4 5/8”
25 1/4”
47 1/4”
5 1/4”
5 1/4”
5 1/16”
47 1/4”
26611
18 17/32”
3080
4 5/8” 21 1/4”
5 1/4”
2880
19 1/4”
4 5/8”
18 17/32”
2868
18 17/32”
8 1/16”
5 1/4”
25 1/4”
5 1/16”
5 1/16”
5 1/16”
2680
4 5/8”
18 17/32”
18 17/32”
4 5/8”
63 1/4”
21 1/4”
5 1/4”
4 5/8”
30611
63 1/4”
5 1/4”
19 1/4”
28611
21 1/4”
18 17/32”
2668
18 17/32”
8 1/16”
8 1/16”
18 17/32”
63 1/4”
4 5/8”
25 1/4”
4 5/8”
6 5/16”
18 17/32”
26611
4 5/8”
5 1/4”
5 1/16”
4 5/8” 21 1/4”
5 1/4”
19 1/4”
4 5/8” 19 1/4”
18 17/32”
3068
47 1/4”
5 1/4”
5 1/16”
2868
47 1/4”
4 5/8”
25 1/4”
18 17/32”
18 17/32”
2668
4 5/8”
47 1/4”
5 1/4”
21 1/4”
47 1/4”
4 5/8”
47 1/4”
5 1/4”
4 5/8” 19 1/4”
Hinged Patio Door - Outswing
6 5/16”
Hinged Patio Door - Inswing
Vented Sidelight Patio Doors
9HQWHG6LGHOLJKW
9HQWHG6LGHOLJKW
units and dimensions
Vented Sidelight
6’8” Retro Fit
Inswing Vented Sidelight 6’8” Retro Fit
nswing Vented Sidelight
Inswing 6’8”
Vented
Retro
Sidelight
Fit 6’8” Retro Fit
63
LEGEND
P = Passive
. Handing from exterior view
S = Stationary
LEGEND
LEGEND
. Doors are not reversible
R = Hinge at right side exterior view
P = Passive
P = Passive
. Retractable screen available
as an option L = Hinge at left side exterior view
. Handing from exterior
. Handing
view from exterior view
S = Stationary
S = Stationary
DVS= Vented Sidelight
. Doors are not reversible
. Doors are not reversibleR = Hinge at right side
R =exterior
Hinge atview
right side exterior view
. Retractable screen. available
Retractable
as an
screen
option
available
L = Hinge
as an at
option
left sideL exterior
= Hingeview
at left side exterior view
DVS= Vented Sidelight
DVS= Vented Sidelight
29
Gliding
series
FE ATURES
•Panels and frames made of composite material with
Hydroshield Technology for advanced moisture
protection and maximum durability
•Durable fiberglass skins will not rust, dent, split or rot
•Energy Star Certified in all 50 States
•Durable CFC free polyurethane foam panel core
•Advanced interlocking seal design
•Monorail track for reduced friction
•Adjustable stainless steel tandem rollers
•Removable glazing bead for easy glass replacement
•Door Heights available in 6’-8”, 6’-11”, 7’-10” and
8’-0” sizes
•Frames available in 4-9/16” or 6-9/16” sizes
•Thresholds include drainage systems to channel water
away from doors
•Paintable smooth surface is standard with options for
stainable wood textured surface
•Doors tested for structural stability, water infiltration,
air infiltration, forced entry, and energy efficiency.
Standard Features Chart
31
Features
1 Advance Interlocking
Seal Design
2 Retractable Screen
Optional retractable screens
available.
3 Co-extruded glazing
bead
4 Weep Hole
5 Bottom
Wind
Stopper
6 Securing
Plate
7 Adjustable
Stainless Steel
Tandem Rollers
33
full lite gliding
Height
6’-8”, 6’-11”, 7’-10” and 8’-0”
Width
5’-0” 6’-0” and 8’-0”
Shown with medium oak finish and gold brass Royal handle set.
See pages 38 & 40 for units and dimensions.
34
Height
6’-8”, 6’-11” and 8’-0”
Width
5’-0” 6’-0”and 8’-0”
3/4 lite gliding with
decorative glass
Shown with smooth white finish, satin nickel handle set, 3/4 Lite
and decorative glass option.
*Decorative Glass option available only for 3’0” width panels.
See page 41 for units and dimensions.
35
3 panel gliding
with gbg
Gliding Patio Door
Height
6’-8”, 6’-11”, 7’-10” and 8’-0”
Width
7’-6”, 9-0” and 12’-0”
Shown with smooth white finish, white handle set and prairie style
GBG option.
See pages 39 & 40 for units and dimensions.
36
4 panel gliding
Gliding Patio Door
Height
6’-8”, 6’-11”, 7’-10” and 8’-0”
Width
*10’-0” and 12’-0”
Shown with smooth white finish and satin nickel handle set.
* Units wider than 9’ wide are shipped KD (Knocked Down)
See pages 39 & 40 for units and dimensions.
37
Gliding Series
Single & Two panel units
Single & Two panel
2’-8 1/4”
3’-2 1/4”
4’-2 1/4”
5’
6’
8’
2’-7 1/2”
3’-1 1/2”
4’-1 1/2”
4’-11 1/4”
5’-11 1/4”
7’-11 1/4”
21 5/16”
27 5/16”
38”
21 5/16”
27 5/16”
38”
DGP 2668
(O)
DGP 3068
(O)
DGP 4068
(O)
DGP 5068
(X
O)
DGP 6068
(X
O)
DGP 8068
(X
O)
DGP 26611
(O)
DGP 30611
(O)
DGP 40611
(O)
DGP 50611
(X
O)
DGP 60611
(X
O)
DGP 80611
(X
O)
20”
26”
38”
20”
26”
38”
6‘- 11”
6’-10 3/8“
67”
6‘- 8”
6’-7 1/2”
67”
Rough Opening
Unit Dim.
Glass Dim.
7‘- 9 3/4”
7‘- 9 1/4”
80”
Glass Dim.
8‘- 0”
7’-11 1/2“
80”
DGP 60710
(X
O)
DGP 2680
(O)
DGP 3080
(O)
DGP 4080
(O)
DGP 5080
(X
O)
DGP 6080
(X
O)
Standard Grille Patterns
6’8 & 6’11 Height items
10-Lite
15-Lite
For 8’ Height
12-Lite
38
18-Lite
DGP= Gliding Door
DGP 8080
(X
O)
Three & Four panel
Rough Opening
Unit Dim.
Glass Dim.
Reference
7’-8 1/8”
9’-2 1/8”
12’-2 1/8”
7’-7 3/8”
9’-1 3/8”
12’-1 3/8”
21 5/16”
27 5/16”
38”
Handing
Call-out
Reference
Code
Reference
6‘- 8”
6’-7 1/2“
67”
Handing
Call-out
Reference
Code
DGP 7668
(X
O
O)
(X
DGP 9068
O
O)
(X
DGP 12068
O
O)
Three Panels
XO-O
O-OX
LSS
SSR
Three Panels
OX-O
O-XO
SRS
SLS
Standard Grille Patterns
6‘- 11”
6’-10 3/8“
67”
6’8 & 6’11 Height items
(X
Glass Dim.
DGP 76611
O
O)
(X
20”
DGP 90611
O
O)
(X
DGP 120611
O
O)
38”
10-Lite
15-Lite
For 8’ Height
8‘-0”
7’-11 1/2“
80”
26”
units and dimensions
Three & Four panel units
(X
DGP 7680
O
O)
(X
DGP 9080
O
O)
(X
DGP 12080
O
Reference
Handing
Call-out
Reference
Code
9’-10”
11’-9 7/8”
9’-9 1/4”
11’-9 1/8”
21 5/16”
27 5/16”
Four Panels
OXXO
SPLS
Standard Grille Patterns
For 26, 30, 50, 60 Width
6’8 & 6’11 Height items
6’8 & 6’11 Height items
6‘- 8”
6’-7 1/2“
67”
Rough Opening
Unit Dim.
Glass Dim.
18-Lite
12-Lite
O)
(O
DGP 10068
X
X
O)
(O
DGP 12068
X
X
O)
10-Lite
15-Lite
6‘- 11”
6’-10 3/8“
67”
For 8’ Height
(O
Glass Dim.
DGP 100611
X
X
O)
(O
20”
DGP 120611
X
X
O)
26”
12-Lite
18-Lite
LEGEND
8‘-0”
7’-11 1/2“
80”
. Handing from exterior view
. Doors are not reversible
. Retractable screen available as an option
(O
DGP 10080
X
X
O)
(O
DGP 12080
X
X
O)
O = Fixed Panel
X = Active Panle
S = Stationary Panel
DGP= Gliding Door
39
Gliding Series
panel specifications
Gliding Patio Doors
Mull Kits
Gliding Patio Door
Vented Sidelight
Gliding
5/8”
SA052
SA061
Mull Extension for
Optional
Extended Jambs
When creating a custom
configuration by combining
panels and door units, add
5/8” to the rough opening
to allow for the width of the
aluminum mull.
2’-8 1/4”
3’-2 1/4”
5’
6’
2’-7 1/2”
3’-1 1/2”
4’-11 1/4”
5’-11 1/4”
20”
26”
20”
26”
6‘- 8”
6’-7 1/2”
48”
Rough Opening
Unit Dim.
Glass Dim.
DGP 3068
(O)
DGP 5068
(X
O)
DGP 6068
(X
O)
DGP 26611
(O)
DGP 30611
(O)
DGP 50611
(X
O)
DGP 60611
(X
O)
6‘- 11”
6’-10 3/8“
48”
DGP 2668
(O)
40
LEGEND
. Handing from exterior view
. Doors are not reversible
. Retractable screen available as an option
O = Fixed Panel
X = Active Panle
S = Stationary Panel
DGP= Gliding Door
2668
3068
DGP 50611
(X
O)
DGP 60611
(X
O)
20”
26”
20”
26”
Glass Dim.
5 1/4”
5 1/4”
47 1/4”
DGP 30611
(O)
19 1/4”
25 1/4”
79 1/4”
6‘- 11”
6’-10 3/8“
48”
DGP 26611
(O)
18 17/32”
8 1/4”
29 3/4”
35 3/4”
19 1/4”
25 1/4”
18 17/32”
2680
9’-2 1/8”
9’-10”
11’-9 7/8”
9’-1 3/8”
9’-9 1/4”
11’-9 1/8”
20”
26”
20”
26”
7668
9068
76611
90611
3080
6‘- 8”
6’-7 1/2“
48”
7’-8 1/8”
7’-7 3/8”
5 3/8”
18 17/32”
Rough Opening
Unit Dim.
Glass Dim.
5 1/4”
63 1/4”
5 1/4”
DGP 6080
(X
O)
63 1/4”
DGP 5080
(X
O)
30611
5 1/4”
DGP 3080
(O)
18 17/32”
92 3/8”
8‘- 0”
7’-11 1/2“
64”
26611
DGP 2680
(O)
47 1/4”
35 3/4”
29 3/4”
5 1/4”
18 17/32”
79 1/4”
DGP 6068
(X
O)
92 3/8”
DGP 5068
(X
O)
O = Fixed Panel
X = Active Panle
S = Stationary Panel
18 17/32”
DGP= Gliding Door
5 7/16”
DGP 3068
(O)
25 1/4”
76 7/16”
47 1/4”
6‘- 8”
6’-7 1/2”
48”
DGP 2668
(O)
5 1/4”
. Handing from exterior view
. Doors are not reversible
. Retractable screen available as an option
5 1/4”
26”
35 3/4”
47 1/4”
20”
26”
20”
LEGEND
5 1/4” 19 1/4”
8 1/4”
5’-11 1/4”
5 1/4”
6’
4’-11 1/4”
5 3/8”
5’
3’-1 1/2”
5 1/4”
3’-2 1/4”
2’-7 1/2”
5 7/16”
29 3/4”
2’-8 1/4”
76 7/16”
Rough Opening
Unit Dim.
Glass Dim.
units and dimensions
3/4 Lite Panel Specifications
3/4 Lite Gliding Units
DGP 10068
X
X
O)
(O
DGP 100611
X
X
O)
DGP 12068
6‘- 11”
6’-10 3/8“
48”
(O
20”
26”
7680
9080
20”
DGP 120611
X
X
O)
26”
8‘-0”
7’-11 1/2“
64”
Glass Dim.
(O
(O
DGP 10080
X
X
O)
(O
DGP 12080
X
X
O)
41
Transom
42
Features
•Frames are made of 100% composite material
•Optional wood grain available unfinished & pre-finished
•Transoms with removable glazing bead makes glass replacement easier
•Frames are available in 4-9/16” and *6-9/16”.
•Custom size transoms available by special order
•Custom grill between glass and simulated divided light (SDL) pattens available
* Net Jamb dimensions are 5-3/4” and 7-3/4”
* Shipped unstacked (not mulled)
* Transoms are tested seperatly from door unit.
* Doors are not tested with stacked transoms *
See pages 44 & 45 for units and dimensions.
43
Transom
For Hinged Doors
1‘- 1/2”
1’
9 7/8”
Rough Opening
Unit Dim.
Glass Dim.
2‘-7 3/8”
2’-6 5/8”
28 1/2”
2‘-9 3/8”
2’-8 5/8”
30 1/2”
* GTI 2610
* GTO 2610
* GTI 2810
* GTO 2810
5‘
4’-11 1/4”
57 1/8”
27 3/4”
3‘-1 3/8”
3’-0 5/8”
34 1/2”
5‘-4”
5’-3 1/4”
61 1/8”
29 3/4”
GTI 5010
GTO 5010
* GTI 3010
* GTO 3010
* GTI 5410
* GTO 5410
* GTI 5010-2 TDL * * GTI 5410-2 TDL *
1‘- 4 1/2”
1’-4“
13 7/8”
GTO 5010-2 TDL
* GTI 2614
* GTO 2614
* GTI 3014
* GTO 3014
* GTI 2814
* GTO 2814
* GTO 5410-2 TDL
GTI 5014
GTO 5014
* GTI 5414
* GTO 5414
* GTI 5014-2 TDL * * GTI 5414-2 TDL
2‘- 1/2”
2’
21 7/8”
GTO 5014-2 TDL
* GTI 2620
* GTO 2620
*
GTI 5020
GTO 5020
* GTI 3020
* GTO 3020
* GTI 2820
* GTO 2820
6‘
5’-11 1/4”
69 1/8”
33 3/4”
*
GTI 6010
GTO 6010
GTI 6010-2 TDL
GTO 6010-2 TDL
GTI 6014
GTO 6014
*
GTO 5414-2 TDL
GTI 6014-2 TDL
GTO 6014-2 TDL
* GTI 5420
* GTO 5420
GTI 5020-2 TDL
GTO 5020-2 TDL
*
* GTI 5420-2 TDL
* GTO 5420-2 TDL
GTI 6020
GTO 6020
*
GTI 6020-2 TDL
GTO 6020-2 TDL
For 3 Panel
1‘- 1/2”
1’
9 7/8”
*
1‘- 4 1/2”
1’-4“
13 7/8”
*
2‘- 1/2”
2’
21 7/8”
Rough Opening
Unit Dim.
Glass Dim.
*
7‘-10 9/16”
7’-9 13/16”
29 7/16”
7‘-4 9/16”
7’-3 13/16”
27 7/16”
* GTI 7610-3 TDL
* GTO 7610-3 TDL
* GTI 7614-3 TDL
* GTO 7614-3 TDL
*
*
8‘-10 9/16”
8’-9 13/16”
33 7/16”
* GTI 8010-3 TDL
* GTO 8010-3 TDL
* GTI 8014-3 TDL
* GTO 8014-3 TDL
*
* GTI 7620-3 TDL
* GTO 7620-3 TDL
*
*
*
* GTI 8020-3 TDL
* GTO 8020-3 TDL
* GTI 9010-3 TDL
* GTO 9010-3 TDL
* GTI 9014-3 TDL
* GTO 9014-3 TDL
* GTI 9020-3 TDL
* GTO 9020-3 TDL
*For
Vented
Sidelight*
For
Vented
Sidelight
**
*
TDL
*
*
*
*
*
*
TDL
*
*
TDL
*
*
*
TDL
*
*
*
*
*
TDL
TDL
*
TDL
*
*
TDL
*
*
TDL
LEGEND
1. Rough Opening Width=Unit Dim. Width + 3/4”
2. Rough Opening Height = Unit Dim. Height + 1/2”
3. Glass Option: Clear / Inner Grille / Art Glass
4. Custom Size Also Available by Special Order
5. Standard transom are equal size glass
6. Special size or special Lite pattern must be
by special order
7. GTI = Inswing
8. GTO = Outswing
9. GTV = Vented Sidelight
Note: Transom grid patterns may not align with certain doors. Please call for assistance with transom selection.
* All transoms with divided lites are True Divided Lite (TDL). Grille between glass (GBG) and simulated divided lite (SDL) options
are also available.
44
1‘-4 1/2”
1’-4”
13 7/8”
1‘- 1/2”
1’
9 7/8”
Rough Opening 2‘-8 1/4”
Unit Dim.
2’-7 1/2”
Glass Dim. 29 7/16”
3‘-2 1/4”
3’-1 1/2”
35 7/16”
* GTG 2610
* GTG 2614
* GTG 3010
* GTG 3014
4‘-2 1/4”
4’-1 1/2”
47 7/16”
* GTG 4010
5‘
4’-11 1/4”
57 1/8”
6‘
5’-11 1/4”
69 1/8”
8‘
7’-11 1/4”
27 3/4”
33 3/4”
45 3/4”
GTG 5010
GTG 6010
* GTG 5010-2 TDL *
* GTG 4014
GTG 5014
2‘- 1/2”
2’
21 7/8”
* GTG 3020
* GTG 4020
GTG 5020
*
GTG 5020-2 TDL
*
GTG 8010-2 TDL
GTG 6014
* GTG 5014-2 TDL *
* GTG 2620
GTG 6010-2 TDL
GTG 6014-2 TDL
*
GTG 8014-2 TDL
units and dimensions
For Gliding Doors
GTG 6020
*
GTG 6020-2 TDL
*
GTG 8020-2 TDL
For3 3Panel
Panel
For
7‘-8 1/8”
7’-7 3/8”
28 5/8”
1‘-4 1/2”
1’-4”
13 7/8”
*
*
2‘- 1/2”
2’
21 7/8”
1‘- 1/2”
1’
9 7/8”
Rough Opening
Unit Dim.
Glass Dim.
*
* GTG 7610-3 TDL
* GTG 7614-3 TDL
12‘-2 1/8”
12’-1 3/8”
46 5/8”
9‘-2 1/8”
9’-1 3/8”
34 5/8”
*
*
* GTG 9010-3 TDL
* GTG 9014-3 TDL
*
* GTG 12010-3 TDL
* GTG 12014-3 TDL
*
*
* GTG 7620-3 TDL
*
* GTG 9020-3 TDL
* GTG 12020-3 TDL
For
Panel
For
44
Panel
Rough Opening
Unit Dim.
Glass Dim.
1‘- 1/2”
1’
9 7/8”
*
1‘-4 1/2”
1’-4”
13 7/8”
*
2‘- 1/2”
2’
21 7/8”
9‘-10”
9’- 9 1/4”
27 1/2”
*
* GTG 10010-4 TDL
* GTG 10014-4 TDL
11‘-9 7/8”
11’-9 1/8”
33 1/2”
*
*
* GTG 12010-4 TDL
* GTG 12014-4 TDL
*
* GTG 10020-4 TDL
* GTG 12020-4 TDL
LEGEND
1. Rough Opening Width=Unit Dim. Width + 3/4”
2. Rough Opening Height = Unit Dim. Height + 1/2”
3. Glass Option: Clear / Inner Grille / Art Glass
4. Custom Size Also Available by Special Order
5. Standard transom are equal size glass
6. Special size or special Lite pattern must be
by special order
7. GTG = Gliding
45
Design
Options
46
Re d e fin in g th e home, one do or at a t ime...
47
design options
Smooth White
48
Golden Oak
Dark Mahogany
White Wood grain
Medium Oak
Golden Oak
Smooth White
Smooth White
Medium Oak
finish options
3N2
002
Standard
Finish.
Standard
finish
on all of
Neuma’s
Patio
Doors.
Standard smooth white can be painted,
unstained can be stained.
*
Interior
Smooth
White
Unstained
002
Smooth
White
002
Smooth
White
*
Exterior
Available pre-pigmented or pre-stained colors
Unstained
Medium Oak
Golden Oak
Dark Mahogany
White Wood grain
Pre-finish combinations available for Neuma’s Patio Door Units.
Neuma Customers can have their patio doors customized with the following pre-finish combinations. There is an additional 8-10
week turnaround time on all orders. This option saves time and money by eliminating the need for finishing on-site.
* The smooth white is not a finished face.
3MF
3M2
3RF
3R2
3KF
3KF
003
302
Unstained
Dark
Mahogany
Dark
Mahogany
Golden
Oak
Golden
Oak
Medium
Oak
Medium
Oak
White
Wood
Grain
White
Wood
Grain
*
3MF
Unstained
Dark
Mahogany
002
Smooth
White
3RF
Golden
Oak
002
Smooth
White
3KF
Medium
Oak
*
002
Smooth
White
003
White
Wood
Grain
002
Smooth
White
Exterior
300
*
*
Color
Code
Interior
300
3/4 Lite doors woodgrain door option is only available in a Mahogany woodgrain texture.
All colors in this catalog are computer-generated images and have been replicated as accurately as
possible.
49
hinged hardware
Standard Hardware
•Single Point Lock Systems are standard on 6’8” and 6’11” doors
•Multi Point Lock Systems are standard on 7’6” & 8’0” doors
•Handle Sets, available in your choice of color and style
Tiffany Series
White
Dark Brown
(POWDER COATED)
Gold Brass
Satin Nickel
Chrome
* Special price
Royal Series
White
Dark Brown
(POWDER COATED)
Gold Brass
Satin Nickel
Hardware Options
50
Precisionengineered
entry spring
latch and
dead bolt
lock design
standard on
Neuma’s
6’8” and
6’11” door
units.
Optional Multi
Point Lock
System for
6’8, 6’11”
Stainless steel
strike plates
provide excellent
corrosion
resistance,
enhanced
performance,
smooth
operation, and the
best security value.
Standard Multi Point Lock System for 7’6” & 8’0”
Standard
lock system
Optional Multi-Point Lock 6’8” & 6’11”
Standard Single 6’8” & 6’11”
•Multi Point Lock Systems are optional on 6’-8”, 6’-11”, 7’-6” and 8’-0” Doors
•HPVD (High Physical Vapor Deposition) coated handle sets are available in the Royal Style handle set in Gold Brass or
Satin Nickel colors. The HPVD coating provides additional protection in harsh environments. HPVD coating requires proper maintenance. see maintenance guide for proper care instructions.
Standard on
our 7’6” & 8’0”
doors
Neuma’s 7’6” &
8’0” doors come
standard with our
multi-point lock system. Unique to our
7’6” & 8’0” hinged
door units is it features a 3 hook lock
and keeper design to
maintain the highest
level of security.
*Muti-lock plate and
strike plates are
available in gold
brass and satin
nickel finishes only.
gliding hardware
Standard Hardware
•Single Point Lock Systems are standard on 6’8”
and 6’11” doors
•Multi Point Lock Systems are standard on 7’10” and 8’0” doors
•White Sills are standard on all doors
•Handle Sets available in your choice of color
Standard Handleset Choices
Gold Brass
Satin Nickel
Dark Brown
(POWDER
White
COATED)
*Straight Handleset Option
• Exterior option only
• Not available with mini blind option
• Only available with a Satin Nickel finish
Hardware Options
Precision-engineered single
mortise hookstyle lock and
keeper come
standard on
Neuma’s 6’8”
and 6’11” door
units.
Optional Multi
Point Lock
System for
6’8, 6’11”
Stainless steel
strike plates
provide excellent
corrosion
resistance,
enhanced
performance,
smooth
operation, and the
best security value.
Standard Multi Point Lock System for 7’6” & 8’0”
Standard
Single Point
Lock System
for 6’8”,
6’11”
Optional Multi-Point Lock 6’8” & 6’11”
Standard Single 6’8” & 6’11”
•Multi Point Lock Systems are optional on 6’-8” and 6’-11” Doors
•HPVD (High Physical Vapor Deposition) coated handle sets are available in Gold Brass or Satin Nickel colors.
The HPVD coating provides additional protection in harsh environments. HPVD coating requires proper maintenance. see maintenance guide for proper care instructions.
•Straight exterior handle in Satin Nickel finish set is available as an option (straight handle set not compatible with
blinds between glass option)
Standard on our
7’-10” & 8’-0”
doors
Neuma’s 7’-10” &
8’0” doors come
standard with our
multi-point lock
system. Unique to
our 7’-10” & 8’0”
gliding door units is
it features a 3 hook
lock and keeper
design to maintain
the highest level of
security.
*Muti-lock plate and
strike plates are
available in gold
brass and satin
nickel finishes only.
51
impact options
If a home has been
breached through
a broken door or
window, wind can then
enter.This causes an
increase in pressure
that can lift the roof
and push the walls
outward.
Neuma’s Impact Rated Doors are designed to protect people
and property during violent storms. A major cause of storm
damage is debris that is picked up and hurled towards your
home in high winds. These objects, set on a collision course
with your home, can penetrate doors and provide an entry
point for water, high winds and additional debris. Our Impact
Doors stand up to the harshest treatment and are more resistant to denting than traditional metal doors.
Neuma’s Impact Rated Door Systems come standard with high
impact fiberglass panels, 1” insulated laminated impact glass
and HPVD (High, Physical, Vapor, Deposition) coated hardware
which provides extra protection in harsh
environments.
If the door glass is broken, our standard 1” insulated laminated
impact glass maintains its integrity thanks to the vinyl interlayer
which remains in the door frame. Neuma Doors unique removable glazing bead allows for glass replacement if it is broken.
Our Impact Series
help preserve the
house’s envelope
to minimize the
damage from the
storm’s elements.
The glass in most
other impact doors
on the market is not
replaceable, making it necessary to
purchase an entire
new unit.
Neuma Doors
Impact Hinged Inswing and Gliding Doors can withstand
windstorm of over 145mph and our Hinged Outswing can
withstand windstorm as high as 170mph. With a variety of
door styles, design options and configurations, Neuma Doors
are an affordable option to expensive and unsightly roll-down
or accordion style shutters. Neuma’s Impact Rated Doors are
certified by the Texas Department of Insurance, Florida Building
Code, and Miami Dade County.
Wind Zone Map
Areas subject to hurricane-force winds. Windborne Debris Regions as determined by the
International Building Code.
Neuma Doors impact gliding & inswing
hinged fiberglass doors can withstand windstorm of over 145mph, and our impact
outswing hinged door can withstand as high
as 170mph.
(AAMA / NWWDA / CAS101 / I.S. 2 / A4408)
52
V mph (m/s)
90
(40)
100
(45)
110
(49)
120
(54)
130
(58)
140
(63)
150
(67)
Note: The above
wind zones are
approximate.
Please refer to
the International
Building Code
for precise locations.
glazing options
Argon filled
units for
energy
efficiency.
LoE 3 366
glass.
Standard Insulated Glass
The insulating effect of your doors has a direct
impact on how your rooms feel. Our glazing
options provide not only a beautiful entry, but also a reliable
barrier against the heat and damaging rays of the hot sun.
Each double pane Low-E glass option provides Argon gas filled
insulation to prevent the transfer of heat, keeping heat in during the winter and out during the summer.
Keeps the cold
weather out and
the warm air in
during the winter
Rejects the sun
heat & damaging UV rays in
summer
2
Available LoE
glass options are
designed to reflect
ultraviolet light,
not only keeping
interiors cooler or warmer, but also protecting interior
furnishings from fading. Warm edge spacers help to keep the
panes at the correct distance apart while reducing heat flow
and preventing condensation.
Standard LoE3 366 glass, ultimate performance glass
An unprecedented 3 layers of silver and Argon gas fill results in a clear coating that blocks the solar heat gain, reflects heat and
3
lets the light stream in giving you the ideal balance of solar control and high visibility. LoE 366 is also the perfect choice for cold
weather climates helping to keep higher interior glass temperatures in cold weather, dramatically improving any thermal discomfort from the cold outside air.
Optional LoE3 340 glass, glare back at the sun
The solution to solar glare and thermal discomfort starts with LoE3 340 glass with Argon gas fill. Uncontrolled sunlight can be an
3
offender by bringing thermal discomfort and creating visual glare. LoE 340 glass provides a great combination of aesthetic appeal along with energy savings and indoor comfort.
Optional Insulated Laminated Impact Glass
ed
G
la
su
1” In
te
dL
lass
Laminated glazing for the greatest protection from life’s storms. Neuma Doors impact glazing
gives you and your home the best level of security and assurance.
tR
ami
nated Impac
at
During windstorms and hurricanes, wind borne wreckage can impact windows, with gusting,
pervasive winds to follow. The broken glass fragments adhere to the interlayer and maintain the
homes defense from the wind, rain and forced entry. Laminated impact glass adds security and
cannot be cut from one side only.
53
Decorative
Glass
54
design options
SG1002
SG1048
SG1008
SG1023
IRA-1002
IRA-1004
Zinc
Patina
Zine & Patina Caming Color Options avaliable.
Neuma’s Decorative Glass Options are available in 26” x 48” and 26”x 64” sizes for 3/4 Lite 3’0” Neuma
Doors.
*All colors in this catalog are computer-generated images and have been replicated as accurately as possible.
55
Blinds
Between
the Glass
56
Clear
Blinds Between the Glass
Neuma Blinds Between the Glass feature cordless tilt,
raise and lower operation. The mini blinds are sealed
between 2 panes of glass within the door and proved
several key benefits.
CLEANLINESS – No accumulation of dust or
allergens.
SAFETY –No hanging cords or operators and provide
Maximum safety protection for children and pets.
PRIVACY AND LIGHT CONTROL – Flexibility to
adjust to your desired level of privacy and sunlight.
Raise the blinds completely for maximum sunlight and
an unobstructed view or close completely for total
privacy.
DURABILITY - Blinds stay protected from damage
behind the glass and away from curious little fingers
and paws.
57
design options
Simulated
Divided Lites
(SDL)
Simulated divided lites
give you the classic
look and feel of a true
divided lite door. 100%
Composite SDL bars are
fixed directly to the glass
and can be ordered
with or without Grilles
Between the Glass. 7/8”
SDL bars are available for
5/8”, 3/4” and 1” glaze
options in both smooth
and woodgrain textures
in finishes to match the
door’s finish.
Grilles Between Glass (GBG)
Flat white ¾” grilles between two layers of glass are
available in 10, 12, 15 and 18 standard lite patterns or
can be customized by special order.
Brick Molding
58
screens options
Retreactable Screen
•Our Retractable screens can be used in
Standard Gliding
Screen
most of our Patio doors Systems: Inswing,
Outswing, Center Hinged and Gliding.
•Available for single and double doors
units.
•Screentrack with individual lock plunger to
open each door with ease. No magnets.
59
Guides
handing guide
Single Doors
DFH - S
Exterior View
Outswing
DFH -L
DFH -R
DFP - S
Inswing Vented Sidelight - 6’8” Retro Fit
Inswing
DFP -R
DVS - LLPR
DFP -L
DVS - LPRR
Center Hinged Doors (2 panel)
DFH - SS
DFH -RS
DFH -PR
Outswing
DFH -SL
DFP - SS
Inswing
DFP -RS
DFP -SL
DFH -LP
DFP - SS
Exterior View
Inswing
DFP -PR
DFP -LP
Gliding Doors
O
DFH - SSS
DFH - SLS
XO
DFP - SLS
Exterior View
OX
OXXO
Outswing
DFH - SRS
XO-O
DFP - SSS
DVS - LRR
Exterior View
Outswing
Center Hinged Doors (3 panel)
DVS - LLR
Exterior View
Double Hinged Doors (2 panel)
DFH - SS
Exterior View
O-OX
O-XO
OX-O
Inswing
DFP - SRS
61
Painting
instructions for
flush glazed
patio doors
Materials Needed
1. Scotch Brite Pad (Fine) or 320-400 grit
sandpaper
2. For water-based application: Acrylic primer/acrylic
latex-based exterior grade paint. We recommend using
“Sherwin Williams PrimeRX® Peel Bonding Primer” with
compatible acrylic-latex paint for optimal paint adhesion.
Step 1: Surface Preparation
1. Remove all the hardware and mask off anything you
don’t want painted.
2. Lightly scuff sand the surface with a Scotch Brite pad or
fine sandpaper.
3. Wipe the door with acetone to clean
any dust or residue from the
surface. Allow acetone to dry
from the surface before applying
primer.
4. Do not use hydrocarbon based
solvents to clean the surface
as such products may leave a
residue.
5. Apply primer with a paint brush.
Follow the manufacturer’s instructions for drying time before applying
topcoat. Continue to apply primer to all 6
sides, include bores and mortises.
6. The primer must be completely dry before applying the
topcoat.
Step 2: Painting
1. Apply exterior grade paint with a paint brush.
2. It is common practice to paint both stiles the same color
as the exterior side of the door. If applying a second
coat, follow the manufacturer’s instructions for drying
time between coats.
3. Continue to apply the topcoat to all 6 sides. Door panels which have been bored and mortised for hardware
62
should be
finished inside of the lock
bore as well.
Caution
1. When using stains,
mineral spirits, paints, or
other hazardous materials,
always read and follow the
manufacturer’s instructions. Neuma
Doors
makes no representations as to the proper use of other
manufacturers’ products.
2. When working with paints or solvents, make sure the
working area is well ventilated.
3. Keep away from heat and flame as materials may
be combustible.
4.
Paints or solvents may cause skin and eye
irritation. Avoid contact with skin and eyes.
5. Keep out of reach of children.
Maintenance
All well-finished fiberglass doors will be affected
by exposure and weathering from sun, moisture,
and air pollutants. It is considered normal maintenance to re-apply the topcoat approximately every
two years.
CAUTION: Painting Neuma Doors dark colors can result in
poor performance. Dark colors are
considered any color that falls
within the lightness (L) value
of 56 to 0. Where 100 is
white and 0 is black. Use
paint with a light reflective
value (LRV) of 57 units or
greater.”
Stain
Woodgrain
Step 1: Surface Preparation
1. If possible, lay door horizontally on a padded surface to
prevent scratches.
2. Remove all the hardware and mask off anything you don’t want stained.
3. DO NOT SAND GRAINED COMPOSITE.
4. Wipe the door with mineral spirits to clean any dust or residue from the surface.
Allow door surface to dry completely before applying stain.
Step 2: Stain Application
Materials Needed
1. Pre-Mixed Stain (1/2 pint)
2. Mineral Spirits (4 fl. oz.)
3. Top Coat/Sealer (20 fl. oz.)
4. Two Clean Cloths
5. One Pair Protective Gloves
6. 3’’ China Bristle Brush
7. Two Stir Sticks
8. Finishing Instruction
Apply stain with a 3” to 4” soft bristle brush, or rag to small sections of the door at
a time. Apply enough stain to fill the door grain.
With a clean, lint-free 24 x 24 inch cloth, softly wipe the surface until you reach
your desired tone.
TIP: When the rag becomes saturated with stain, re-fold to work with a less-saturated section. Be sure to use the same rag for the whole door.
After all the stain is brushed evenly you may add finishing touches by using a small 1”
to 2” brush or cotton swabs.
Additional coats may be applied to achieve desired look. Follow all stain
manufacturers instructions for proper application (if different) and compatibility
information.
Step 3: Protective Top Coat
Application of a polyurethane top coat with UV inhibitors like ZAR™ Exterior polyurethane, Wood Kote®
Flagship UV, or Minwax® Fast Drying Polyurethane for exterior applications.
1. After stain has completely dried (48 hours), mix the top coat well and apply evenly using a clean dry 2” soft bristle brush or 3” foam
brush. Be sure to stop when the grain changes direction.
2. Apply two or three coats of finish, allowing at least 24 hours of drying time between each application.
Normal Maintenance
Even a well-finished door will be affected by exposure and weathering from sun, moisture, and air pollutants. It is considered normal maintenance to reapply the topcoat approximately every two years.
Due to the variability in finishing materials, application conditions and techniques, all of which are beyond the control of Neuma Doors. Neuma cannot
be responsible for the performance of field applied finishes or individual application techniques.
*Staining instructions are for Oil-Based, Premium Quality Stains or similar product designed for use on fiberglass. Please note the instructions indicated
are specific to the Zar brand stain. Please reference stain manufacturers instructions before applying any stain.
CAUTION: Staining Neuma Doors dark colors can result in poor performance. Dark colors are considered any color that falls within the lightness (L) value of 56 to 0, where 100 is white and 0 is black. Use stain with a light reflective value (LRV) of 57 units or greater.
63
Oxidation/
Chalking cleaning
and maintenance
“Composite and fiberglass products are low-maintenance and easy to care for, they will perform their best with some
occasional attention. In rare cases, products can be affected by solar energy or chemicals that can cause a change in
color – including fading, darkening or yellowing. In most climates and with many mild chemicals, a change may not
even be noticed. In other cases, however, the color change may be more dramatic and become cause for concern.
A chalky white substance on your patio doors panels maybe caused by oxidation, which
occurs most often during damp or wet weather. Oxidation can be cleaned from most doors,
but the process can be time-consuming and labor-intensive.”
Suggested cleaning and maintenance...
1. Rinse with a light spray of water to remove dust, dirt
and debris. Use a garden hose and spray the water
downward to avoid getting any
beneath the door panels, where it can damage the
floor beneath.
2. Wear safety glasses to avoid spraying cleaning solution into your eyes as you work. Mix 5 cups of vinegar into 1 gallon of hot water, and pour some of this
solution into a spray bottle.
3. Apply the vinegar and water solution onto a small
section of trim and scrub with a long-handle, softbristle cleaning brush. Work from the bottom of the
trim up to avoid streaking.
Sections of about 10 feet or less are usually easier to
work with than larger sections, because the vinegar
64
and water solution won’t have time to dry on the
panels before you rinse.
4. Hose off the trim with a gentle spray of clean water,
again spraying downward.
5. Continue to spray and scrub the oxidation until you
have cleaned all of the trim. Use a ladder to reach
sections of trim on the upper levels of your home.
6. HPVD handle sets should be wiped down with a non-abrasive, clean, damp cloth once a month. The
protective coating on the HPVD handle sets naturally
have a dull appearance. Do not attempt to polish
the HPVD handle set as it will destroy the protective
finish.”
Maintenance
• Vacuum dirt and
debris from sill and
track areas before washing
• Clean glass and door frame with a mixture of mild dish
soap and water. Rinse completely with clean water and wipe
dry with a soft cloth to avoid water spots.
• Avoid washing glass in direct sunlight.
• Never use abrasive or caustic cleaners. They can cause
permanent damage to the frame finish or the glass.
• Mild, nonabrasive soaps are usually the safest for most dirt
and stain removal, but any cleaner you use should be tested
in an inconspicuous area first.
• Always rinse completely with clear water and wipe dry if
possible.
• Check to make sure drainage or “weep” holes are always
clear of dirt and obstructions - both inside and outside the
door in the bottom of the frame.
• Clean screens by removing them, washing them on a flat,
clean surface with mild soap and water and a soft brush.
Then rinse, wipe dry and reinstall.
• Doors with moving parts include hardware components that
should be lubricated periodically. In salt-air environments,
these components require monthly lubrication.
• After wiping clean, use a silicone spray with a non-petroleum-based propellant on door or sliding door tracks, rollers and locking hardware
65
Door Design Specifications
Hinged Doors
Standard Features
• Standard hinged door units come with
smooth white interior and exterior, LoE3
366 glass, stainless steel hinges and
4-9/16” jambs.
• Single-point locks standard on 6’8”
and 6’11” height doors.
• Multi-Point locks standard on all 7’6”
and 8’0” height doors.
General Information
• Gold brass and dark brown handle
sets come with matching sills and
brass strike plates. Satin nickel and
white handle sets comes with an aluminum sill and strike plates.
• 6’11” ¾ lite panel doors are available
in inswing only.
• Decorative glass options available for
¾ lite 3’0” doors.
• Extended 6-9/16” jamb options available.
Gliding Doors
Standard Features
• Standard gliding door units come with
smooth white interior and exterior, LoE3
366 glass and 4-9/16” jambs.
• Single-point locks standard on all 6’8”
and 6’11” height doors.
• Multi-point locks standard on all 7’10”
and 8’0” height doors.
• All units that measure over 9’ in width
are shipped knock-down (KD).
General Information
• Unfinished gliding doors come with a
matching, paintable sill. All other gliding doors come with a white sill.
• Decorative glass options available for
¾ lite doors.
• Extended 6-9/16” jamb options available.
Impact Doors
Impact Rated Doors
• Impact door options come standard
with smooth white interior and exterior,
LoE3 366 glass, stainless steel hinges,
4-9/16” jambs and HPVD coated
handle sets.
• HPVD coated handle and lock set are
only available in the Royal Series style
in choice of satin nickel or gold brass
finishes.
Miami Dade County Impact
Rated Doors
• Miami-Dade County impact rated
units are tested under TAS 201, 202,
203 and are certified for Miami-Dade
NOA.
• Miami-Dade County impact rated
doors are assembled with reinforced
fiberglass panels.
Vented Sidelight
Standard Features
• Vented Sidelight standard units come
with smooth white interior and exterior,
LoE3 366 glass, stainless steel hinges,
and 4-9/19” jambs.
• Standard dead bolt and latch on the
main door and multi-point locks on
Energy Star Certified in all 50 States
The quality of a Neuma Door is evident
in the rigorous testing that the door systems withstand.
In addition to receiving high marks in
structural performance tests, Neuma
Doors is highly focused on energy efficiency which contributes to a comfortable
indoor climate and energy savings.
Neuma Doors are ENERGY STAR qualified everywhere in the United States. The
ENERGY STAR label signifies that Neuma
Doors has undergone rigorous testing in
EPA-recognized third-party laboratories.
66
the sidelights are standard.
• Fixed screens on the sidelights are
standard.
General Information
• Multi-point locks on the main door are
available as an option.
• Vented sidelights are available in 6’8”
height only.
• Vented sidelight units available as
inswing door only.
Transoms
• Transoms are available to create many
combinations.
• Transoms are tested independently
from the door unit.
• Transoms are not factory mulled to the
door unit. It is the sole responsibility of
the installer to follow proper installation instructions.
• Transoms with grid patterns are available. It is the sole responsibility of the
distributor to provide correct order
information for proper grid alignment
between the transom and the door.
Blinds
• Mini blinds option is not available with
LoE glass, impact glass, decorative
glass, or ¾ lite panel options.
Hinge Patio
Doors -- Non-Impact
Non-Impact Inswing AAMA
AAMA Test Results
Results (Full Lite
Lite Panel)
Hinge
Hinge Patio
Patio Doors
Doors - Non-Impact Inswing
Inswing AAMA Test
Test Results (Full
(Full Lite Panel)
Panel)
Design Pressure
Pressure
Product
(psf)
Hinge Patio
Patio
Doors -- Non-Impact
Non-Impact
Inswing
AAMA
Test
Results
(Full
Lite
Panel)
Structure
Performance
Water
Resistance
Inswing
AAMA
Test
Results
(Full
Panel)
Hinge
Doors
Design
Product
Structure Performance (psf) Lite
Water
Resistance (psf)
(psf)
Design Pressure
Product
sss Product
Product
3068,
ss L/R/S
3068, 30611,
30611,
L/R/S
3068,
30611,
L/R/S
3068, 30611,
30611, L/R/S
L/R/S
6068,
60611,
LP/PR/SL/RS/SS
3068,
6068,
60611,
6068, 60611, LP/PR/SL/RS/SS
LP/PR/SL/RS/SS
6068, 60611,
60611,
LP/PR/SL/RS/SS
12068,
120611,
SLPS/SPRS
6068,
LP/PR/SL/RS/SS
12068,
12068, 120611,
120611, SLPS/SPRS
SLPS/SPRS
12068,L/R/S
120611, SLPS/SPRS
SLPS/SPRS
12068,
120611,
3080,
3080,
3080, L/R/S
L/R/S
6080,
LP/PR/SL/RS/SS
3080, L/R/S
L/R/S
3080,
6080,
6080, LP/PR/SL/RS/SS
LP/PR/SL/RS/SS
6080,
12080,
SLPS/SPRS
6080,
LP/PR/SL/RS/SS
12080,LP/PR/SL/RS/SS
SLPS/SPRS
12080,
SLPS/SPRS
12080, SLPS/SPRS
SLPS/SPRS
12080,
Rating
Rating
Rating
Design
Pressure
Design
Pressure
Rating
DP40
Rating
DP40
DP40
DP40
DP40
DP40
DP40
DP40
DP40
DP40
DP40
DP40
DP40
DP50
DP50
DP50
DP50
DP50
DP50
DP50
DP50
DP50
DP50
DP50
DP50
DP50
Structure Performance (psf)
(psf)
StructurePerformance
Performance (psf)
Structure
+90/-90
+90/-90
+90/-90
+90/-90
+90/-90
+90/-90
+90/-90
+90/-90
+90/-90
+90/-90
+90/-90
+90/-90
+90/-90
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
Inswing -- Non-Impact
Non-Impact AAMA Test
Test Results (3/4
(3/4 Lite Panel)
Panel)
Inswing
Inswing - Non-Impact AAMA
AAMA Test Results
Results (3/4 Lite
Lite Panel)
Design
Pressure
InswingProduct
Non-Impact
AAMA
Test
Results
(3/4
Lite
Panel)(psf)
Inswing
Non-Impact
AAMA
Test
Results
(3/4
Lite
Panel)
Product
Design Pressure Structure Performance
Product
Product
Product
12080 SLPS
SLPS
12080
12080 SLPS
12080 SLPS
SLPS
12080
120611
SLPS
120611
120611 SLPS
SLPS
120611 SLPS
SLPS
120611
Design
Pressure
Rating
Rating
Design
Pressure
Rating
Design
Pressure
Rating
Rating
DP50
DP50
DP50
DP50
DP50
DP50
DP50
DP50
DP50
DP50
(psf)
Structure Performance
Performance (psf)
Structure
(psf)
StructurePerformance
Performance (psf)
Structure
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
7.5
6.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
Water
Resistance (psf)
Water
Water Resistance
Resistance (psf)
(psf)
Water Resistance
Resistance (psf)
(psf)
Water
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
Outswing
- Non-Impact AAMA
Test Results
(Full Lite
Panel)
Outswing
Outswing -- Non-Impact
Non-Impact AAMA
AAMA Test
Test Results
Results (Full
(Full Lite
Lite Panel)
Panel)
Design
Pressure
Product
Outswing
Non-Impact
AAMA
Test
Results
(Full
Lite
Panel) (psf)
Structure
Performance
OutswingProduct
- Non-Impact AAMA
Results
(Full Lite
Panel)
DesignTest
Pressure
(psf)
Structure
Performance
Design
Pressure
Product
ss
Product
s Product
3068,
30611,
ss L/R/S
3068,
30611,
3068, 30611, L/R/S
L/R/S
3068, 30611,
30611, L/R/S
L/R/S
6068,
60611,
LP/PR/SL/RS/SS
3068,
6068,
6068, 60611,
60611, LP/PR/SL/RS/SS
LP/PR/SL/RS/SS
6068, 60611,
60611,
LP/PR/SL/RS/SS
12068,
120611,
SLPS/SPRS
6068,
LP/PR/SL/RS/SS
12068, 120611,
120611, SLPS/SPRS
SLPS/SPRS
12068,
12068,
120611,
SLPS/SPRS
12068,
120611, SLPS/SPRS
3080, L/R/S
L/R/S
3080,
3080, L/R/S
6080,
LP/PR/SL/RS/SS
3080, L/R/S
L/R/S
3080,
6080,
LP/PR/SL/RS/SS
6080,
LP/PR/SL/RS/SS
6080,
LP/PR/SL/RS/SS
12080,
SLPS/SPRS
6080,
LP/PR/SL/RS/SS
12080,
12080, SLPS/SPRS
SLPS/SPRS
12080, SLPS/SPRS
SLPS/SPRS
12080,
Rating
Rating
Rating
Design
Pressure
Design
Pressure
Rating
DP65/DP70
Rating
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
Structure Performance (psf)
(psf)
StructurePerformance
Performance (psf)
Structure
+105/-105
+105/-105
+105/-105
0.09
0.09
0.09
0.09
0.09
0.02
0.02
0.02
0.02
0.02
AAMA
101
AAMA
101
AAMA
101
Standard
Standard
AAMA
101
Standard
AAMA
101
SHD-class
R-PG50
Standard
SHD-class
R-PG50
Standard
SHD-class
R-PG50
143 1/8"x95
1/8"x95 1/2"
1/2"
143
143 1/8"x95
1/2"
SHD-class
R-PG50
SHD-class
R-PG50
SHD-class
R-PG50
SHD-class
R-PG50
143
1/8"x95
1/2"
SHD-class
R-PG50
143
1/8"x95
1/2"
143 1/8"x82
1/8"x82 1/2"
1/2"
143
143 1/8"x82
1/2"
SHD-class
R-PG50
SHD-class
R-PG50
143 1/8"x82
1/8"x82 1/2"
1/2"
143
Air
Infiltration
Air
Infiltration
Air(cfm/ft2)
Infiltration
(cfm/ft2)
Air
Infiltration
(cfm/ft2)
Air Infiltration
(cfm/ft2)
(cfm/ft2)
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
0.19
0.19
0.19
0.19
0.19
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
-
+75 // -75
-75
+75
+75 / -75
+75 / -75
+75
+75 // -75
-75
Non-Impact
0.25
+75 // -75
-75
+75
Hinge
(psf)
7.5
7.5
7.5
0.09
7.5
7.5
7.5
7.5
0.14
7.5
7.5
STC
Product Specification
Vented
Sidelight -- Non-Impact
AAMA Test
Results
Vented
6068,Sidelight
LP Outswing
Vented
Sidelight
- Non-Impact
Non-Impact AAMA
AAMA Test
Test Results
Results
Product
Design
Pressure
Vented
Sidelight
- Non-Impact
Non-Impact
AAMAStructure
Test Results
Results
Vented
Sidelight
AAMA
Test
(0.625"
Standard -Non-Impact
29Performance (psf)
Product
Design Glass)
Pressure
Product
Product
Product
8068,
LLPR
8068,
LLPR
8068, LLPR
8068, LLPR
LLPR
8068,
Design
Pressure
Rating
Rating
Design
Pressure
Rating
Design
Pressure
Rating
Rating
DP30
DP30
DP30
DP30
DP30
Structure
(psf)
Structure Performance
Performance (psf)
(psf)
StructurePerformance
Performance (psf)
Structure
+45/-45
+45/-45
+45/-45
OITC
25 Resistance (psf)
Water
Water
Water Resistance
Resistance (psf)
(psf)
Water Resistance
Resistance (psf)
(psf)
Water
4.5
4.5
4.5
+45/-45
+45/-45
Standard
SHD-class
R-PG50
SHD-class
R-PG50
143 1/8"x95
1/8"x95
1/2"
143
1/2"
143
1/8"x95
1/2"
0.18
SHD-class
R-PG50
SHD-class
R-PG50
SHD-class
R-PG50
SHD-class
R-PG50
143
1/8"x95
1/2"
143
1/8"x95
SHD-class
R-PG50
143 1/8"x79
1/8"x79 1/2"
1/2"
143
1/2"
0.30
143
1/8"x79
1/2"
SHD-class
R-PG50
SHD-class
R-PG50
1431/8"x79
1/8"x791/2"
1/2"
143
(cfm/ft2)
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
4.5
4.5
Air
Infiltration
Air
Infiltration
Air(cfm/ft2)
Infiltration
(cfm/ft2)
Air(cfm/ft2)
Infiltration
Air
Infiltration
(cfm/ft2)
(cfm/ft2)
0.02
0.02
0.02
0.02
0.02
Energy
Performance Rating
(Full Lite
Panel)--For Non-Impact
Hinge Patio
Doors
Energy
Energy Performance
Performance Rating
Rating (Full
(Full Lite
Lite Panel)--For
Panel)--For Non-Impact
Non-Impact Hinge
Hinge Patio
Patio Doors
Doors
U-Factor
Solar Heat
HeatNon-Impact
Gain Coefficient
CoefficientHinge
Visible
Light Thansmittance
Thansmittance
Energy
Performance
Rating (Full
(Full
Lite Panel)--For
Panel)--For
Non-Impact
Hinge
Patio
Doors
Energy
Performance
Rating
Lite
Patio
Doors
U-Factor
Solar
Gain
Visible
Light
Product
Specification
SHD-CLASS
SHD-CLASS
SHD-CLASS
R-PG50
R-PG50
R-PG50
SHD-CLASS
SHD-CLASS
144”
X 96”
96”
144”
X
144”
X 96”
R-PG50
R-PG50
144” XX 96”
96”
144”
FL 14752.23-R4
FL
FL 14752.23-R4
14752.23-R4
dr649
dr649
dr649
FL 14752.23-R4
14752.23-R4
FL
dr649
dr649
F.B.C
F.B.C &
& T.D.I
T.D.I
F.B.C
&
T.D.I
Approval
No.
Approval
No.
F.B.C &
& T.D.I
T.D.I
Approval
No.
F.B.C
Approval No.
No.
Approval
FL14752.27-R4
FL14752.27-R4
FL14752.27-R4
FL14752.27-R4
FL14752.27-R4
FL14752.30-R4
FL14752.30-R4
FL14752.30-R4
FL14752.30-R4
FL14752.30-R4
SHD-CLASS
SHD-CLASS
SHD-CLASS
R-PG70
R-PG70
R-PG70
SHD-CLASS
SHD-CLASS
143
X
143 1/4”
1/4”
X 95
95 3/4”
3/4”
143
1/4”
X
95
3/4”
R-PG70
R-PG70
143
1/4”
X
95 3/4”
3/4”
143 1/4” X 95
0.14
0.14
0.14
0.14
0.14
Structure
Design
Pressure
Water
Resistance
AAMA
Air
Infiltration
Product
Outswing
Non-Impact
AAMA
Test Results
Results
(3/4 Lite
Lite
Panel)
Structure
Outswing
-- Non-Impact
AAMA
(3/4
Panel)
Design
Pressure
Water
Resistance
AAMA 101
101
Air Infiltration
Infiltration
Product
Structure
Design
PressureTest
Water
Resistance
101
Air
Product
Performance
(psf)
Rating
(psf)
Standard
(cfm/ft2)
U-Factor
Solar
Heat
Gain Coefficient
Visible LightAAMA
Thansmittance
specification
Performance
(psf)
Rating
(psf)
Standard
(cfm/ft2)
specification
Structure
Product
Specification
Design
Pressure
Water
Resistance
AAMA
101
Performance
(psf)
Air
Infiltration
Rating
(psf)
Standard
(cfm/ft2)
Structure
Product
Design Pressure
Water Resistance
AAMA
101
specification
Air Infiltration
Product
(BTU/hrft2
F)
(SHGC)
(VT)
SHD-class
R-PG50
Performance(psf)
(psf)
Rating
(psf)
Standard
(cfm/ft2)
Performance
specification
0.25
+75 / -75
F.B.C & T.D.I
T.D.I
F.B.C
F.B.C &
& T.D.I
Approval
No.
Approval
No.
F.B.C &
& T.D.I
T.D.I
Approval
No.
F.B.C
Approval No.
No.
Approval
FL 14752.5-R4
14752.5-R4
FL
FL
14752.5-R4
FL 14752.7-R4
14752.7-R4
FL
FL
FL 14752.7-R4
14752.5-R4
14752.5-R4
dr649
dr649
dr649
FL
14752.7-R4
FL 14752.7-R4
dr649
dr649
AAMA
101
AAMA
101
AAMA
101
Standard
Standard
AAMA
101
Standard
AAMA 101
Standard
Standard
SHD-CLASS
SHD-CLASS
SHD-CLASS
R-PG70
R-PG70
R-PG70
SHD-CLASS
SHD-CLASS
143
X
143 1/4”
1/4”
X 82
82 1/2”
1/2”
143
1/4”
X
82
1/2”
R-PG70
R-PG70
143 1/4”
1/4” XX 82
82 1/2”
1/2”
143
Outswing
-- Non-Impact
AAMA Test
Results
Lite
Panel)
Outswing
Results
(3/4
Lite
Energy
Performance
RatingTest
(Full
Lite (3/4
Panel)
Non-Impact For Hinge Patio Doors
Outswing
- Non-Impact
Non-Impact AAMA
AAMA
Test
Results
(3/4
Lite -Panel)
Panel)
Rating
12080
SLPS
DP50
specification
12080
DP50
12080 SLPS
SLPS
DP50
LoE 340
12080 SLPS
SLPS
DP50
12080
DP50
12068,SLPS
12068,SLPS
DP50
12068,SLPS
DP50
Sound
Transmission
Class
LoE 366
12068,SLPS
DP50
12068,SLPS
DP50
AAMA 101
101
AAMA
AAMA
101
Standard
Standard
AAMA
101
Standard
AAMA
101
Standard
Standard
SHD-CLASS
SHD-CLASS
SHD-CLASS
R-PG40
R-PG40
R-PG40
SHD-CLASS
SHD-CLASS
144”
X 83”
83”
144”
X
144”
X 83”
R-PG40
R-PG40
144” XX 83”
83”
144”
Air Infiltration
Infiltration
Air
Air(cfm/ft2)
Infiltration
Air(cfm/ft2)
Infiltration
(cfm/ft2)
Air
Infiltration
(cfm/ft2)
(cfm/ft2)
0.006
0.006
0.006
0.006
0.006
0.1
0.1
0.1
0.1
0.1
Water Resistance
Resistance (psf)
Water
Water Resistance (psf)
(psf)
Water Resistance
Resistance (psf)
(psf)
Water
10.5
10.5
10.5
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
+105/-105
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
DP65/DP70
Air
Infiltration
Air
Infiltration
Air(cfm/ft2)
Infiltration
(cfm/ft2)
Air(cfm/ft2)
Infiltration
Air
Infiltration
(cfm/ft2)
(cfm/ft2)
Water Resistance (psf)
Water Resistance
Resistance (psf)
(psf)
Water
6.0
6.0
6.0
testing
hinge test results - non-impact
F.B.C
& T.D.I
F.B.C
F.B.C &
& T.D.I
T.D.I
Approval
No.
Approval
No.
F.B.C
& T.D.I
T.D.I
Approval
No.
F.B.C &
Approval
No.
Approval No.
FL
14752.7
FL
14752.7
FL dr650
14752.7
dr650
FLdr650
14752.7
FL
14752.7
dr650
dr650
FL
14752.9
FL
14752.9
FL dr650
14752.9
dr650
dr650
FL
14752.9
FL 14752.9
dr650
dr650
F.B.C.
& T.D.I.
F.B.C.
F.B.C. &
& T.D.I.
T.D.I.
Approval
No.
Approval
No.
F.B.C.
&T.D.I.
T.D.I.
Approval
No.
F.B.C. &
Approval
No.
Approval No.
FL14752.28-R4
FL14752.28-R4
FL14752.28-R4
FL14752.28-R4
FL14752.28-R4
FL14752.31-R4
FL14752.31-R4
FL14752.31-R4
FL14752.31-R4
FL14752.31-R4
AAMA
101
AAMA
101
AAMA
101
Standard
Standard
AAMA
101
Standard
AAMA
101
HGD-LC30
Standard
HGD-LC30
Standard
HGD-LC30
94”
X
83”
94”
94” X
X 83”
83”
HGD-LC30
HGD-LC30
94” XX 83”
83”
94”
U-FactorF)
Solar Heat(SHGC)
Gain Coefficient Visible Light(VT)
Thansmittance
Product
Specification
(BTU/hrft2
Energy
Performance
(Full
Lite
Panel)
- Coefficient
Non-Impact
For
Hinge
Patio Doors
Product
Specification Rating
(BTU/hrft2
U-FactorF)
SolarHeat
Heat(SHGC)
GainCoefficient
VisibleLight
Light(VT)
Thansmittance
(BTU/hrft2
F)
(SHGC)
(VT)
U-Factor
Solar
Gain
Visible
Thansmittance
ProductSpecification
Specification
Product
2/SS/0.057/ARG/0.444/N
0.27 F)
(BTU/hrft2
F)
(BTU/hrft2
2/SS/0.057/ARG/0.444/N
0.27
2/SS/0.057/ARG/0.444/N
0.27 U-Factor
Product
Specification
2/SS/0.057/ARG/0.444/G
0.27
2/SS/0.057/ARG/0.444/N
0.27
2/SS/0.057/ARG/0.444/N
0.27
(BTU/hrft2
F)
2/SS/0.057/ARG/0.444/G
0.27
2/SS/0.057/ARG/0.444/G
0.27
2/SS/0.057/ARG/0.567/N
0.26
2/SS/0.057/ARG/0.444/G
0.27
2/SS/0.057/ARG/0.444/G
0.27
2/SS/0.057/ARG/0.567/N
0.26
LoE 340
2/SS/0.057/ARG/0.567/N
0.26 0.25
2/SS/0.057/ARG/0.567/G
0.26
2/SS/0.057/ARG/0.567/N
0.26
2/SS/0.057/ARG/0.567/N
2/SS/0.057/ARG/0.567/G
0.26
LoE 366
2/SS/0.057/ARG/0.567/G
0.26 0.25
2/SS/0.057/ARG/0.567/G
0.26
2/SS/0.042/ARG/0.444/N
0.26
2/SS/0.057/ARG/0.567/G
2/SS/0.042/ARG/0.444/N
0.26
2/SS/0.042/ARG/0.444/N
0.26
2/SS/0.042/ARG/0.444/G
0.26
2/SS/0.042/ARG/0.444/N
0.26
2/SS/0.042/ARG/0.444/N
2/SS/0.042/ARG/0.444/G
0.26
2/SS/0.042/ARG/0.444/G
0.26
2/SS/0.042/ARG/0.567/N
0.26
2/SS/0.042/ARG/0.444/G
0.26
2/SS/0.042/ARG/0.444/G
Sound
Transmission
Class
Non-Impact
2/SS/0.042/ARG/0.567/N
0.26
2/SS/0.042/ARG/0.567/N
0.26
2/SS/0.042/ARG/0.567/G
0.26
2/SS/0.042/ARG/0.567/N
0.26
2/SS/0.042/ARG/0.567/N
0.26
2/SS/0.042/ARG/0.567/G
0.26
STC
Product Specification
2/SS/0.042/ARG/0.567/G
0.26
2/SS/0.022/ARG/0.444/N
0.26
2/SS/0.042/ARG/0.567/G
0.26
2/SS/0.042/ARG/0.567/G
6068,
LP
Outswing
2/SS/0.022/ARG/0.444/N
0.26
2/SS/0.022/ARG/0.444/N
0.26
(0.625"
Standard Non-Impact Glass)
29
2/SS/0.022/ARG/0.444/N
0.26
2/SS/0.022/ARG/0.444/G
0.26
2/SS/0.022/ARG/0.444/N
2/SS/0.022/ARG/0.444/G
0.26
2/SS/0.022/ARG/0.444/G
0.26
2/SS/0.022/ARG/0.567/N
0.26
2/SS/0.022/ARG/0.444/G
0.26
2/SS/0.022/ARG/0.444/G
0.26
2/SS/0.022/ARG/0.567/N
0.26
2/SS/0.022/ARG/0.567/N
0.26
2/SS/0.022/ARG/0.567/G
0.26
2/SS/0.022/ARG/0.567/N
0.26
2/SS/0.022/ARG/0.567/G
2/SS/0.022/ARG/0.567/N
0.26
2/SS/0.022/ARG/0.567/G
0.26
2/SS/0.022/ARG/0.567/G
0.26
2/SS/0.022/ARG/0.567/G
0.26
0.13
0.19
(SHGC)
(VT)
(SHGC)
(VT)
0.13
Solar
0.13 Heat Gain Coefficient 0.19
0.19Visible Light Thansmittance
0.11
0.16
0.13
0.19
0.13
0.19
(SHGC)
(VT)
0.11
0.16
0.11
0.16
0.13
0.11
0.11
0.13
0.13
0.11
0.13
0.13
0.11
0.11
0.11
0.20
0.11
0.20
0.20
0.18
0.20
0.20
0.18
0.18
0.20
0.18
0.18
Hinge
0.20
0.20
0.17
0.20
0.20
0.17
0.17
0.14
0.17
0.17
0.14
0.14
0.14
0.12
0.14
0.12
0.12
0.14
0.12
0.12
0.14
0.14
0.12
0.14
0.12
0.14
0.12
0.12
0.12
0.09
0.14
OITC
25
0.18
0.16
0.16
0.18
0.18
0.15
0.18
0.18
0.15
0.15
0.15
0.34
0.15
0.34
0.34
0.28
0.34
0.34
0.28
0.28
0.32
0.28
0.28
0.32
0.32
0.27
0.32
0.32
0.27
0.27
0.30
0.27
0.27
0.30
0.30
0.30
0.25
0.30
0.25
0.25
0.29
0.25
0.25
0.29
0.29
0.24
0.29
0.24
0.29
0.24
0.24
0.24
0.18
0.30
67
hinge test results - impact
Sound Transmission Class - Non-Impact
Product Specification
Hinge
6068, LS
Gliding Patio Doors Hinge
Patio Doors
(1" Standard Non-impact
Product Glass)
Product
6068, LS Glidings
s
(0.625" Standard
Non-impact Glass)
Inswing SLPS(OXXO)
STC
OITC
Impact & Cycle Testing Performance
Impact & Cycle Testing Performance
30
Design Pressure 25 Structure Performance (psf)
Max. Testing
Test Standard
NON-IMPACT
Design
Pressure
Max. Testing
Test Standard
Structure Performance (psf)
Rating
Dimension
Rating
Dimension
27
23
11’11” X 6’11”
DP50
+75/-75
ASTM E1886/ASTM E1996
Inswing SLPS(OXXO)
11’11” X 6’11”
DP50
+75/-75
ASTM E1886/ASTM E1996
Outswing SLPS(OXXO)
11’11” X 6’11”
DP50/DP70
+105/-105
ASTM E1886/ASTM E1996
Outswing SLPS(OXXO)
11’11” X 6’11”
DP50/DP70
+105/-105
ASTM E1886/ASTM E1996
Outswing SLP(OXX)
9’1” X 6’11”
DP70
+105/-105
TAS201/202/203
Outswing SLP(OXX)
9’1” X 6’11”
DP70
+105/-105
TAS201/202/203
Inswing SLPS(OXXO)
11’11” X 8’0”
DP50
+75/-75
ASTM E1886/ASTM E1996
Inswing SLPS(OXXO)
11’11” X 8’0”
DP50
+75/-75
ASTM E1886/ASTM E1996
Inswing SLP(OXX)
+75/-75
TAS201/202/203
9’1” X 8’0”
DP50
Inswing SLP(OXX)
+75/-75
TAS201/202/203
9’1” X 8’0”
DP50
Energy
Performance Rating
Impact
Hinge Patio Doors
Outswing SLPS(OXXO)
11’11” X(Full
8’0” Lite Panel)--For
DP50/DP70
ASTM E1886/ASTM E1996
+105/-105
Outswing SLPS(OXXO)
11’11” X 8’0”
DP50/DP70
ASTM E1886/ASTM E1996
+105/-105
Outswing SLP(OXX)
TAS201/202/203
9’1” X 8’0”U-Factor DP50 Solar Heat Gain Coefficient
+75/-75
Visible Light
Thansmittance
Outswing SLP(OXX)
TAS201/202/203
DP50
+75/-75
Product Specification 9’1” X 8’0”
F)DP70
(SHGC) +105/-105
(VT)
Outswing SLPL(OXXX)
TAS201/202/203
12’1” X (BTU/hrft2
8’0”
Outswing SLPL(OXXX)
TAS201/202/203
12’1” X 8’0”
DP70
+105/-105
LoE 340
0.24
3/4
- Impact & Cycle Testing Performance
3/4 Lite
Lite Panel
Panel
LoE 366 - Impact & Cycle Testing
0.24 Performance
Product
Product
Inswing SLP(OXX)
Inswing SLP(OXX)
Outswing SLP(OXX)
Outswing SLP(OXX)
Outswing SLPS(OXXO)
Outswing SLPS(OXXO)
Inswing SLPS(OXXO)
Inswing SLPS(OXXO)
Max. Testing
Max. Testing
Dimension
Dimension
Design Pressure Rating
Design Pressure Rating
8’10” X 8’0”
8’10” X 8’0”
8’10” X 8’0”
8’10” X 8’0”
11’11” X 6’8”
11’11” X 6’8”
11’11” X 6’11”
11’11” X 6’11”
0.09
0.18
0.13
0.30
Test Standard
Test Standard
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
+75/-75
ASTM E1886 / ASTM E1996
ASTM E1886 / ASTM E1996
ASTM E1886 / ASTM E1996
ASTM E1886 / ASTM E1996
ASTM E1886 / ASTM E1996
ASTM E1886 / ASTM E1996
ASTM E1886 / ASTM E1996
ASTM E1886 / ASTM E1996
Gliding
Patio
- Impact & Cycle Testing Performance
Gliding
Patio Doors
DoorsClass
- Impact
& Cycle
Testing Performance
Sound Transmission
- Hinge
Impact
Design Pressure
Product
Max. Testing
Test Standard
Structure Performance
(psf) Doors
Design
Pressure
Product
Energy
Rating
(Full Lite
Panel)--For
Impact
Hinge Patio
Max. Testing
Test Standard
Structure
Performance
(psf)
Rating
STC
OITC
Product
Specification
s Performance
Dimension
Rating
s
Dimension
3080, L Inswing
SRS(OXO)
12’1” X 6’11”
+75/-75
U-Factor DP50
Solar Heat Gain Coefficient
SRS(OXO)
12’1” X 6’11”
DP50
+75/-75
Product
Specification
(1" Double Laminated Glass)
F)35
(SHGC)23
SRS(OXO)
12’1” X(BTU/hrft2
6’11”
DP50
+75/-75
SRS(OXO)
12’1” X 6’11”
DP50
+75/-75
3080, L Outswing
LoE
340
0.24
0.09
SPLS(OXXO)
11’9”
X
6’11”
DP50
+75/-75
(1" Double Laminated Glass) 11’9” X 6’11”
35
30
SPLS(OXXO)
DP50
+75/-75
6068, LP Inswing
LoE 366
0.13 +75/-75
SPLS(OXXO)
11’9” X 6’11”0.24
DP50
SPLS(OXXO)
DP50
+75/-75
(1" Standard Impact Glass) 11’9” X 6’11”
34
30
SRS(OXO)
+75/-75
12’1” X 8’0”
DP50
SRS(OXO)
+75/-75
12’1” X 8’0”
DP50
6068, LP Inswing
SRS(OXO)
12’1 X 8’0”
DP50
+75/-75
(1"
Double
Laminated
Glass)
35
31
SRS(OXO) Transmission Class
12’1 X- 8’0”
DP50
+75/-75
Sound
Hinge Impact
SPLS(OXXO)
6068,
LP
Outswing
11’9” X 8’0”
DP50
+75/-75
SPLS(OXXO)
11’9”
X
8’0”
DP50
+75/-75
STC
OITC
Product Specification
(1" Standard
Impact Glass)
34
30
SPLS(OXXO)
11’9” X 8’0”
DP50
+75/-75
3080,
L
Inswing
SPLS(OXXO)
11’9”
X
8’0”
DP50
+75/-75
6068, LP Outswing
(1"
Laminated
35
23
(1" Double
DoubleTest
Laminated Glass)
Glass)
Transom
& Cycle34
Testing Performance31
Transom
Test Results
Results -- Impact
Impact & Cycle Testing Performance
3080, L Outswing
Product
Max. Testing
(1" Double
Glass)
ProductLaminatedMax.
Testing
Dimension
Dimension
6068, LP Inswing
6’2” X 2’0”
GTI/GTO/GTG
6020 Impact Glass)
(1" Standard
6’2” X 2’0”
GTI/GTO/GTG 6020
GTI/GTO/GTG
12020
6068,
LP
Inswing
12’1” X 2’3”
GTI/GTO/GTG
(with
mullion) 12020
12’1” X 2’3”
(with
(1"mullion)
Double Laminated Glass)
Neuma
Doors
STC Test
6068,
LP
Outswing
Neuma Doors STC Test
Sound
Transmission
(1" Standard
ImpactClass-Hinge
Glass)
Sound
Transmission
Class-Hinge
6068,
LP Outswing
Product
Specification
Specification
(1"Product
Double
3080,
L InswingLaminated Glass)
68
E1996
VisibleASTM
LightE1886/ASTM
Thansmittance
ASTM E1886/ASTM E1996
(VT)
TAS201/202/203
TAS201/202/203
0.18
ASTM E1886/ASTM
E1996
ASTM E1886/ASTM E1996
0.30
TAS201/202/203
TAS201/202/203
ASTM E1886/ASTM E1996
ASTM E1886/ASTM E1996
TAS201/202/203
TAS201/202/203
ASTM E1886/ASTM E1996
ASTM E1886/ASTM E1996
TAS201/202/203
TAS201/202/203
FL14752.14
FL14752.14
Approval pending
Approval pending
F.B.C & T.D.I
F.B.C & T.D.I
Approval No.
Approval No.
FL10181.9
FL10181.9
Approval pending
Approval pending
FL10181.7
FL10181.7
Approval pending
Approval pending
FL10181.5/FL10181.11
FL10181.5/FL10181.11
dr652
dr652
NOA 12-0612.16
NOA 12-0612.16
FL10181.3
FL10181.3
NOA 12-0612.05
(Renewal
Pending)
NOA
12-0612.05
(Renewal Pending)
Design Pressure
Design35
Pressure
Rating
Rating
Structure Performance
30 Performance
Structure
(psf)
(psf)
Test Standard
Test Standard
Certification
Certification
DP80
34
DP80
DP80
DP80
35
+120/-120
30
TAS 201/202/203
TAS 201/202/203
NOA 12-0612.11
NOA 12-0612.11
NOA 12-0612.12
NOA 12-0612.12
+120/-120
+120/-120
+120/-120
31
34
STC
STC
3080, L Inswing
(1" Double Laminated Glass)
35
(1" Double Laminated Glass)
35
3080, L Outswing
3080, L Outswing
(1" Double Laminated Glass)
35
(1" Double Laminated Glass)
35
6068, LP Inswing
6068, LP Inswing
(1" Standard Impact Glass)
34
(1" Standard Impact Glass)
34
6068, LP Inswing
6068, LP Inswing
(1" Double Laminated Glass)
35
(1" Double Laminated Glass)
35
6068, LP Outswing
6068,
LP Outswing
Product Description:
glazing
layers
/ spacer
type
(1"
Standard
Impact
Glass)
34
LoE emissivity (surface)
/ gap fil /Impact
gap width
/ grilles / *New Data Pending
(1" Standard
Glass)
34
6068, LP Outswing
SS=stainless steel6068, LP Outswing
(1"
Double
Laminated
Glass)
34
LoE emissivity (1" Double Laminated Glass)
34
0.057=LoE 340 6068, LP Outswing
6068, LP Outswing
29
0.022=LoE 366 (0.625" Standard Non-Impact Glass)
(0.625" Standard Non-Impact Glass)
29
ARG = argon
6068, SR Gliding
N = no grille
6068, SR Gliding
(1"
Standard
Impact
Glass)
32
G = with grille < 1"(1" Standard Impact Glass)
32
6068, SR Gliding
6068, SR Gliding
(1" Double Laminated Glass)
33
(1" Double Laminated Glass)
33
6068, LS Gliding
6068, LS Gliding
(1" Standard Non-Impact Glass)
30
(1" Standard
Non-Impact Glass)
30
6068,
LS Gliding
6068, LS Gliding
(0.625" Standard Non-Impact Glass)
27
(0.625" Standard Non-Impact Glass)
27
NOA 12-0612.18
NOA 12-0612.18
FL14752.21
FL14752.21
NOA 12-0612.17
NOA 12-0612.17
NOA 12-0612.06
NOA 12-0612.06
NOA 12-0612.07
NOA 12-0612.07
F.B.C & T.D.I
F.B.C & T.D.I
Approval No.
Approval No.
Structure Performance
Structure Performance
(psf)
(psf)
DP50
DP50
DP50
DP50
DP50
DP50
DP50
DP50
F.B.C/T.D.I
F.B.C/T.D.I
Dade
County
Dade County
Approval
No.
Approval No.
FL14752.1/ FL14752.3
FL14752.1/ FL14752.3
dr648
dr648
FL14752.5/ FL14752.20
FL14752.5/ FL14752.20
NOA 12-0612.15
NOA 12-0612.15
FL14752.22
FL14752.22
34
TAS 201/202/203
TAS 201/202/203
30
OITC
OITC
31
23
23
30
30
30
30
31
31
30
30
31
31
25
25
29
29
30
30
25
25
*For all product testing approval
numbers and information, please visit
http://www.neumadoors.com/resource
**For Florida Building Code Approval, please see
http://www.floridabuilding.org/pr/pr_app_srch.aspx. For Texas
Department of Insurance Approval, see http://www.tdi.state.
tx.us/wind/prod/indexdr.html . For Dade County Approval, see
http://www.miamidade.gov/building/pc-search_app.asp?
23
23
**For Florida Building Code Approval, please see http://www.floridabuilding.org/pr/pr_app_srch.aspx. For Texas Department of Insurance Approval, see http://www.tdi.state.tx.us/wind/prod/indexdr.html. For
**For Florida
Code
Approval, please see http://www.floridabuilding.org/pr/pr_app_srch.aspx. For Texas Department of Insurance Approval, see http://www.tdi.state.tx.us/wind/prod/indexdr.html. For
Dade
CountyBuilding
Approval,
see http://www.miamidade.gov/building/pc-search_app.asp?
Dade County Approval, see http://www.miamidade.gov/building/pc-search_app.asp?
FL14752.18
FL14752.18
dr424
dr424
(Renewal
Pending)
(Renewal Pending)
Non-Impact
Gliding Patio Doors
s
Product
- Non-Impact AAMA Test Result (Full Lite Panel)
Design Pressure
Rating
Structure Performance (psf)
Water Resistance (psf)
6068,60611, LS/SR(XO/OX)
DP50
+75/-75
7.5
9068, 90611, SSR/LSS (OOX/XOO)
DP50
+75/-75
7.5
12068, 120611, SPLS (OXXO)
DP50
+75/-75
7.5
8068, 80611, LS/SR (XO/OX)
DP50
+75/-75
7.5
12068, 120611, SRS (OXO)
DP50
+75/-75
7.5
6080, LS/SR (XO/OX)
DP50
+75/-75
7.5
9080, SSR/LSS (OOX/XOO)
DP50
+75/-75
7.5
12080, SPLS (OXXO)
DP50
+75/-75
7.5
8080, LS/SR (XO/OX)
DP50
+75/-75
7.5
12080, SRS (OXO)
DP50
+75/-75
7.5
Air Infiltration
(cfm/ft2)
AAMA 101
Standard
F.B.C & T.D.I
Approval No.
0.028
SGD-Class
R-PG50
142” x 83”
FL 10181.6
0.007
SGD-Class
R-PG50
146” x 83”
FL 10181.8
0.074
SGD-Class
R-PG50
142” x 96”
FL 10181.1
FL 10181.10
dr651
0.028
SGD-Class
R-PG50
142” x 96”
FL 10181.4
FL 10181.12
dr653
Energy Performance
Rating
(Full&Lite
Panel)--For
Gliding Patio Doors
Hinge
Patio Doors
- Impact
Cycle
Testing Performance
Product
Product
Specification
s
+75/-75
ASTM E1886/ASTM E1996
F.B.C/T.D.I
Dade County
Approval No.
FL14752.1/ FL14752.3
dr648
DP50/DP70
+105/-105
ASTM E1886/ASTM E1996
FL14752.5/ FL14752.20
DP70
+105/-105
TAS201/202/203
Design
Pressure
Solar Heat
Gain Coefficient
Light Thansmittance
Test Standard
Structure Visible
Performance
(psf)
Rating(SHGC)
(VT)
Max.U-Factor
Testing
(BTU/hrft2 F)
Dimension
Inswing SLPS(OXXO)
11’11” X 6’11”
Outswing SLPS(OXXO)
11’11” X 6’11”
Outswing SLP(OXX)
9’1” X 6’11”
Inswing SLPS(OXXO)
11’11” X 8’0”
DP50
+75/-75
ASTM E1886/ASTM E1996
Inswing SLP(OXX)
X 8’0”
Sound
Transmission Class -9’1”
Non-Impact
DP50
+75/-75
TAS201/202/203
Outswing SLPS(OXXO)
DP50/DP70
Product Specification
11’11” X 8’0”
DP50
STC
Outswing SLP(OXX)
9’1” X 8’0”
6068, LS Gliding
(1" Standard
Non-impact Glass) 12’1” X 8’0”
Outswing
SLPL(OXXX)
6068, LS Gliding
(0.625" Standard Non-impact Glass)
30
OITC
DP50
25
DP70
27
3/4 Lite Panel - Impact & Cycle Testing Performance
NOA 12-0612.15
ASTM E1886/ASTM E1996
+105/-105
TAS201/202/203
NOA 12-0612.17
+105/-105
NON-IMPACT
TAS201/202/203
NOA 12-0612.06
23
8’10” X 8’0”
DP50
+75/-75
8’10” X 8’0”
DP50
+75/-75
ASTM E1886 / ASTM E1996
Structure Performance
(psf)
Outswing SLPS(OXXO)
11’11” X 6’8”
DP50
+75/-75
ASTM E1886 / ASTM E1996
Inswing SLPS(OXXO)
11’11” X 6’11”
DP50
+75/-75
ASTM E1886 / ASTM E1996
Transom Test Results - AAMA Test Results (Full Lite Panel)
Impact
Product
Design Pressure
Water Resistance (psf)
Structure Performance (psf)
Gliding Patio Doors Rating
- Impact & Cycle Testing Performance
Product
GTI/GTG 6020
Design
Pressure
+120/-120
Rating
DP80
Max. Testing
s
Dimension
12.0
Structure Performance
(psf)
GTI/GTG 12020 (With mullion)
SRS(OXO)
DP75
12’1” X 6’11”
+120/-120
DP50
11.25
+75/-75
GTO 6020
SRS(OXO)
DP80
12’1” X 6’11”
+120/-120
DP50
12.0
+75/-75
+120/-120
DP50
+75/-7511.25
SPLS(OXXO)
11’9” X 6’11”
DP50
+75/-75
SRS(OXO)
12’1” X 8’0”
DP50
+75/-75
DP75
11’9” X 6’11”
GTO 12020 (With mullion)
SPLS(OXXO)
6068, LS Glidin
(1" Standard N
6068, LS Glidin
(0.625" Standa
Product Description: glazing
/ spacer type
NOAlayers
12-0612.07
LoE emissivity (surface) / gap fil / gap width / grilles / *New Data Pending
Inswing SLP(OXX)
Design Pressure Rating
FL14752.21
+75/-75
Outswing SLP(OXX)
Max. Testing
Dimension
FL14752.22
NOA 12-0612.18
SS=stainless steel
LoE emissivity
0.057=LoE 240
0.042=LoE 272
Test Standard
0.022=LoE 366
ARG = argon
N = no grille
G = with
grille < 1"
ASTM E1886 / ASTM
E1996
Product
testing
gliding test results
F.B.C & T.D.I
Approval No.
FL14752.14
Approval pending
Air Infiltration
(scfm/ft2)
AAMA 101
Using
Standard
TR-LC80
F.B.C
X 24”& T.D.I
71 1/4”
Test0.01
Standard
Approval No. Inswing/Gliding
TR-R75
0.01
145 3/8” X 24”
ASTM E1886/ASTM E1996
FL10181.9
TR-LC80
0.01
X 24” pending
1/4”
71
Approval
TAS201/202/203
Outswing
TR-R75
0.01
ASTM E1886/ASTM
E1996 145 3/8”
FL10181.7
X 24”
FL14752.18
dr424
(Renewal Pending)
Certification
FL10185.3
FL10185.11
FL10185.7
FL10185.5
Approval pending
TAS201/202/203
ASTM E1886/ASTM E1996
SRS(OXO)
12’1 X 8’0”
DP50
+75/-75
TAS201/202/203
SPLS(OXXO)
11’9” X 8’0”
DP50
+75/-75
ASTM E1886/ASTM E1996
SPLS(OXXO)
11’9” X 8’0”
DP50
+75/-75
TAS201/202/203
FL10181.5/FL10181.11
dr652
NOA 12-0612.16
FL10181.3
NOA 12-0612.05
(Renewal Pending)
Transom Test Results - Impact & Cycle Testing Performance
Max. Testing
Dimension
Design Pressure
Rating
GTI/GTO/GTG 6020
6’2” X 2’0”
GTI/GTO/GTG 12020
(with mullion)
12’1” X 2’3”
Product
Structure Performance
(psf)
Test Standard
Certification
DP80
+120/-120
TAS 201/202/203
NOA 12-0612.11
DP80
+120/-120
TAS 201/202/203
NOA 12-0612.12
Neuma Doors STC Test
Sound Transmission Class-Hinge
Product Specification
3080, L Inswing
(1" Double Laminated Glass)
3080, L Outswing
(1" Double Laminated Glass)
STC
OITC
35
23
35
30
69
gliding test results
Sound Transmission Class - Impact
STC
OITC
Product Specification
6068, SR Gliding
(1" Double Laminated Glass) - Non-Impact
33 AAMA Test Result
30 (Full Lite Panel)
IMPACT
6068, SR Gliding
Product
Design Pressure32
Water Resistance (psf)
Structure Performance
(psf)
(1" Standard
Impct Glass)
29
s
Rating
Gliding Patio Doors
6068,60611, LS/SR(XO/OX)
DP50
+75/-75
7.5
9068, 90611, SSR/LSS (OOX/XOO)
DP50
+75/-75
7.5
12068, 120611, SPLS (OXXO)
DP50
+75/-75
7.5
8068, 80611, LS/SR (XO/OX)
DP50
+75/-75
7.5
12068, 120611, SRS (OXO)
DP50
+75/-75
7.5
6080, LS/SR (XO/OX)
DP50
+75/-75
7.5
9080, SSR/LSS (OOX/XOO)
DP50
+75/-75
7.5
12080, SPLS (OXXO)
DP50
+75/-75
7.5
8080, LS/SR (XO/OX)
DP50
+75/-75
7.5
12080, SRS (OXO)
DP50
+75/-75
7.5
Hinge Patio Doors - Impact & Cycle Testing Performance
s
Product
Design Pressure
Rating
Max. Testing
Dimension
Structure Performance (psf)
Air Infiltration
(cfm/ft2)
AAMA 101
Standard
F.B.C & T.D.I
Approval No.
0.028
SGD-Class
R-PG50
142” x 83”
FL 10181.6
0.007
SGD-Class
R-PG50
146” x 83”
FL 10181.8
0.074
SGD-Class
R-PG50
142” x 96”
FL 10181.1
FL 10181.10
dr651
0.028
SGD-Class
R-PG50
142” x 96”
FL 10181.4
FL 10181.12
dr653
Test Standard
F.B.C/T.D.I
Dade County
Approval No.
FL14752.1/ FL14752.3
dr648
*For all product testing approval numbers
and information,
please visit http://www.
FL14752.5/ FL14752.20
neumadoors.com/resource
NOA 12-0612.15
Product Description:
glazing
layers / spacer type Rating (Full
Inswing
SLPS(OXXO)
11’11” Lite
X 6’11”Panel)--For
DP50 Gliding Patio Doors
+75/-75
ASTM E1886/ASTM E1996
Energy
Performance
LoE emissivity (surface) / gap fil / gap width / grilles / *New Data Pending
SLPS(OXXO)
11’11”
X 6’11”
+105/-105
ASTM E1886/ASTM E1996
U-Factor
SolarDP50/DP70
Heat Gain Coefficient Visible
Light Thansmittance
SS=stainless steel Outswing
Product Specification
LoE emissivity
(BTU/hrft2 F)
(SHGC)
(VT)
9’1” X 6’11”
DP70
+105/-105
TAS201/202/203
0.057=LoE 340 Outswing SLP(OXX)
0.022=LoE 366
Inswing SLPS(OXXO)
ARG = argon
N = no grille
G = with grille < 1"Inswing SLP(OXX)
6068, LS
(1" Stand
6068, LS
(0.625" S
11’11” X 8’0”
DP50
+75/-75
ASTM
E1996 CodeFL14752.22
**ForE1886/ASTM
Florida Building
Approval, please see
9’1” X 8’0”
DP50
+75/-75
http://www.floridabuilding.org/pr/pr_app_srch.aspx.
For Texas
TAS201/202/203
NOA 12-0612.18
Department
of
Insurance
Approval,
see
http://www.tdi.state.tx.us/
ASTM E1886/ASTM E1996
FL14752.21
wind/prod/indexdr.html . For Dade County Approval, see http://www.
TAS201/202/203
NOA 12-0612.17
miamidade.gov/building/pc-search_app.asp?
Outswing SLPS(OXXO)
11’11” X 8’0”
DP50/DP70
+105/-105
Outswing SLP(OXX)
9’1” X 8’0”
DP50
+75/-75
Outswing SLPL(OXXX)
12’1” X 8’0”
DP70
+105/-105
NOA 12-0612.06
NOA 12-0612.07
TAS201/202/203
3/4 Lite Panel - Impact & Cycle Testing Performance
Product
Max. Testing
Dimension
Design Pressure Rating
F.B.C & T.D.I
Product Description: glazing layers / spacer type
Test Standard
Approval
No./ grilles / *New Data Pending
LoE emissivity (surface) / gap
fil / gap width
Structure Performance
(psf)
transom test results
testing
Inswing SLP(OXX)
8’10” X 8’0”
DP50
+75/-75
Outswing SLP(OXX)
8’10” X 8’0”
DP50
+75/-75
Outswing SLPS(OXXO)
11’11” X 6’8”
DP50
+75/-75
Inswing SLPS(OXXO)
11’11” X 6’11”
DP50
+75/-75
SS=stainless steel
emissivity
ASTM E1886 / LoE
ASTM
E1996
0.057=LoE 240
0.042=LoE
272
ASTM E1886 / ASTM
E1996
0.022=LoE 366
ARG = argon
ASTM E1886 / ASTM
E1996
N = no grille
G = with grille < 1"
FL14752.14
Approval pending
ASTM E1886 / ASTM E1996
Transom
Results
- Non
Gliding PatioTest
Doors
- Impact & Cycle
TestingImpact
Performance
AAMA
Test
Results
(Full
Lite
Panel)
Pressure
Product
Panel) Performance (psf)
(Full Lite Structure
Results
- AAMA
Results
Test
Transom
Max.
TestingTest Design
s
Product
SRS(OXO)
Rating
Dimension
Design Pressure
Structure Performance (psf)
Rating
12’1” X 6’11”
DP50
SRS(OXO)
6020
GTI/GTG
Water Resistance (psf)
+75/-75
F.B.C & T.D.I
Test Standard
Approval No.
Air Infiltration
AAMA 101
(scfm/ft2)
ASTM
E1886/ASTM E1996 Standard
FL10181.9
Using
TR-LC80
TAS201/202/203
0.01
X 24” pending
71 1/4”Approval
Inswing/Gliding
TR-R75
ASTM0.01
E1886/ASTM E1996
X 24”
145 3/8”FL10181.7
12’1” X 6’11”
DP80
DP50
+120/-120
+75/-75
12.0
SPLS(OXXO)
mullion)
12020 (With
GTI/GTG
Product Description:
glazing
layers / spacerDP75
type11’9” X 6’11”
DP50
+120/-120
11.25
+75/-75
SPLS(OXXO)
SS=stainless
6020 steel
GTO
DP8011’9” X 6’11”
DP50
+120/-120
+75/-75
12.0
0.057=LoE 340
SRS(OXO)
(With mullion)
12020366
GTO
0.022=LoE
ARG = argon
SRS(OXO)
N = no grille
12’1” X 8’0”
DP75
12’1 X 8’0”
DP50
+120/-120
DP50
+75/-75
11.25
+75/-75
TR-LC80
Approval pending
71 1/4” X 24”
Outswing
FL10181.5/FL10181.11
ASTM E1886/ASTM E1996 TR-R75
dr652
0.01
145 3/8” X 24”
TAS201/202/203
NOA 12-0612.16
+75/-75
ASTM E1886/ASTM E1996
+75/-75
TAS201/202/203
LoE emissivity (surface) / gap fil / gap width / grilles / *New Data Pending
LoE emissivity
G = with grille < 1"
SPLS(OXXO)
11’9” X 8’0”
DP50
Transom
Test Results
SPLS(OXXO)
11’9” X 8’0” - Impact
DP50
& Cycle Testing Performance
TAS201/202/203
0.01
FL10181.3
NOA 12-0612.05
(Renewal Pending)
Transom Test Results - Impact & Cycle Testing Performance
Max. Testing
Dimension
Design Pressure
Rating
Structure Performance
(psf)
Test Standard
Certification
GTI/GTO/GTG 6020
6’2” X 2’0”
DP80
+120/-120
TAS 201/202/203
NOA 12-0612.11
GTI/GTO/GTG 12020
(with mullion)
12’1” X 2’3”
DP80
+120/-120
TAS 201/202/203
Product
Neuma Doors STC Test
Sound Transmission Class-Hinge
70
FL14752.18
dr424
(Renewal Pending)
Product Specification
3080, L Inswing
(1" Double Laminated Glass)
3080, L Outswing
STC
35
OITC
23
NOA 12-0612.12
Certification
FL10185.3
FL10185.11
FL10185.7
FL10185.5
Redefining the home, one door at a time...
71
Limited Lifetime Warranty
For full warranty information, exclusions, limitations,
and warranty service request procedures, please
visit http://www.neumadoors.com/pdf/warranty.
pdf.
NAN YA PLASTICS CORPORATION USA OFFERS A
NON-TRANSFERABLE LIMITED LIFETIME WARRANTY OF THE
NEUMA PATIO DOOR SYSTEM AGAINST: DEFECTS IN MATERIALS AND WORKSMANSHIP INCLUDING;
PEELING, CRACKING AND DELAMINATION. PROPER MAINTENANCE IS REQUIRED. IT DOES NOT COVER VARIATIONS
OR CHANGES IN THE COLOR OF THE DOOR PANEL
INCLUDING BUT NOT LIMITED TO CHALKING AND DISCOLORATION. SHOULD SUCH CHANGES OCCURE, PANELS
MAY BE PAINTED ACCORDING TO MANUFACTURER INSTRUCTIONS. DOOR TRIM AND HANDLE FINISH ARE NOT
COVERED.
72
THIS LIMITED WARRANTY IS IN LIEU OF AND EXCLUDES ALL
OTHER WARRANTIES NOT EXPRESSLY SET FORTH, EXPRESS
OR IMPLIED BY OPERATION OF LAW OR OTHERWISE, INCLUDING WITHOUT LIMITATION TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. TO THE EXTENT THAT ANY IMPLIED WARRANTIES
MAY NONETHELESS EXIST BY OPERATION OF LAW, SUCH
WARRANTIES ARE LIMITED TO THE DURATION PROVIDED
BY LAW. THE LIMITATIONS ON THE LENGTH OF IMPLIED
WARRANTIES VARY FROM STATE TO STATE AND THEREFORE,
SUCH LIMITATIONS MAY NOT BE APPLICABLE IN YOUR
STATE.
Subject to the conditions, exclusion and limitations contained
herein, Nan Ya Plastics Corporation USA warrants that the
Neuma Patio Door System is free from defects in materials and
workmanship from the date of original installation when it has
been properly installed in compliance with the manufacturer’s
installation instructions.
Warranty Coverages During the First Year
Nan Ya Plastics Corporation USA will repair or replace any factory defective door system components or parts at no charge,
during the first year after installation.
Warranty Coverages After the First Year
After the first year, replacement parts may be provided at no
cost (if found to be a warrantable item), but there is no coverage of labor charges for the removal of defective products or
for installation of replacement products. Nan Ya Plastics Corporation USA does not have responsibility, liability, or obligation
for, nor will it pay for any removal or installation labor costs for
the replacement product.
Warranty Details for Neuma Door Systems in
Owner-Occupied Single Family Homes
This Non-Transferable Limited Warranty applies only to the
Neuma Patio Door System installed by a licensed and bonded
contractor in original owner-occupied single-family detached
homes within the United States.
Warranty Coverages for Neuma Door System
Components Installed in Owner-Occupied
Single Family Homes
1. Door frames: Lifetime for original purchaser as long as
purchaser owns home.
2. Mullions: Lifetime for original purchaser as long as
purchaser owns home.
3. Astragals: Lifetime for original purchaser as long as
purchaser owns home.
4. Door panels: Lifetime for original purchaser as long as
purchaser owns home.
5. Transom Frames: Lifetime for original purchaser as long
as purchaser owns home.
6. Locking Mechanism: 10 years for the original purchaser,
excludes trim finish.
7. Glass Components:
1) Non-Impact Glass: 20 year pro-rated limited
warranty against seal failure.
2) Impact Glass: 10 year pro-rated limited warranty
against seal failure.
3) Glass with Mini Blinds: 5 year pro-rated limited
warranty against seal failure only and 1 year
warranty of the magnetic components.
4) Decorative Glass: 1 year limited warranty
against seal failure. Due to the nature of
decorative glass, it is expected that there will be
slight inconsistencies in caming and beveled
glass pieces. Such inconsistencies are not
warrantable.
Nan Ya Plastics Corporation USA warrants that insulated glass
shall be free from any failure or material obstruction of vision due to a failure of the glass seal for the warranty period.
A failed glass seal is defined as one that shows a significant
amount of obstruction due to moisture created by a seal
failure. Small marks, scratches, and spots which do not exceed
company standards or federal government specifications, C
1036-85 do not make insulated glass units defective. See glass
warranty chart for more information.
Warranty Details for Neuma Door Systems in
Multi-Family and Commercial Applications
This Non-Transferable Limited Warranty applies only to the
Neuma Patio Door System installed by a licensed and bonded
contractor in (1) residential applications other than original
owner-occupied single-family detached homes, and (2) commercial applications within the United States.
Warranty Coverage for Neuma Door System
Components Installed in Residential and
Commercial Applications
1. Door frames: 10 years from date of installation.
2. Mullions: 10 years from date of installation.
3. Astragals: 10 years from date of installation.
4. Door panels: 10 years from date of installation.
5. Transom frames: 10 years from date of installation.
6. Locking Mechanism: 5 years from the date of
installation, excludes trim finish.
7. Glass Components:
1) Non-Impact Glass: 5 year pro-rated limited
warranty against seal failure.
2) Impact Glass: 5 year pro-rated limited warranty
against seal failure.
3) Glass with Mini Blinds: 5 year pro-rated limited
warranty against seal failure only.
4) Decorative Glass: 1 year pro-rated limited
warranty against seal failure. Due to the nature of
decorative glass, it is expected that there will be
slight inconsistencies in caming and beveled
glass pieces.Such inconsistencies are not
warrantable.
Nan Ya Plastics USA warrants that insulated glass shall be free
from any failure or material obstruction of vision due to a failure of the glass seal for the warranty period. A failed glass seal
is defined as one that shows a significant amount of obstruction
due to moisture created by a seal failure. Small marks, scratches, and spots which do not exceed manufacturer standards or
federal government specifications,
C 1036-85 do not make insulated glass units defective. See
glass warranty chart for additional information.
73
74
Designs that fit any lifestyle…
75
NAN YA PLASTICS CORP. USA
D.B.A Neuma Doors
76
8989 North Loop East
HOUSTON, Texas 77029
Toll free: 1-866-Doors-15
1-866-366-7715
Fax: 1-888-862-6555
www.neumadoors.com
( 1 / 2016 )