1
Thanks to Orthomove insoles hiking is possible again
for me with no knee pains
anymore - i can feel that
the joints are protected.
Thanks to the secure
support inside the shoes it
even makes more fun.
skiing with Orthomove
insoles has completely
changed: my feet are no
longer falling asleep and
the boot’s edges do not
press anymore. all in all, i
feel safe inside my boots.
Claudia, 28
Anita, 37
since i am running with Orthomove insoles i can cover
even more kilometres.
me and my joints as well
are able to stand the pace
much longer!
basically my touring ski
boots fit quite good, but
actually with the new
Orthomove insoles their fit
is much better and ensures
more power!!!
Werner, 42
Roland, 24
every step fits
on the route to success.
Markus Reifinger, 54
world champion
race walker
Orthomove - a system with know-how
The insole as a link between the foot and the floor
04
05
Multifit System - Insoles
Product Concept and Overview
Individual Products of the Multifit System
06
10
Multiform System - Insoles
Product Concept and Overview
Individual Products of the Multiform System
24
26
Multiform System - Protection
Product Concept and Overview
Individual Products of the Multiform Protectionv System
42
44
Complete Orthomove Product Overview
47
Table of sizes and explanation of symbols
50
Overview Equipment - Analysis- und Adjuststations
52
www.orthomove.net - place your order quickly and easily online
3
Stabilising
Increased lateral stability - not only in the ankle joint
- sets the entire body upright and prevents incorrect
postures and signs of wear and tear.
Comfort
Ideal wearing comfort is ensured by
uniform distribution of pressure of the
contour that can be adapted uniquely.
The Orthomove inlay system accord the highest priority to the ergonomics of the human body and its individuality!
Backed by decades of experience, orthopaedics has optimised the Orthomove insoles for the well-being of the
feet and has tested the products continually together with sportspersons, medical professionals and technicians.
Orthomove has developed two complete inlay systems in order to cover the needs perfectly.
The MultiFit system is a modular inlay system with individually replaceable elements – „ready to use“ for the
wearer. With the MultiForm system, the foot takes on the shape for each specific sole and can thus be adapted
100% to the needs of the wearer. The application-specific model constructions of both systems ensure that the
wearer has pleasant wearing comfort for supporting the activities.
With the inlay systems prevalent in the market, the perfect fit suffers since 3 to 4 times the number of sizes is offered
by exaggerated size optimisation.
Based on the ideal proportion between the forefoot and the rear foot, the Orthomove inlay models are available in
double sizes in order to achieve a particularly high level of perfect fit.
Orthomove - the qualitatively valuable way for your feet!
Shoes are manufactured in accordance with
standard sizes. However, the human foot is unique
and hence, is not subject to any standards, since
the length, width and the shape of the foot arch are
different for each human being.
For a long time, inlays were perceived to be an
orthopaedic aid that is used primarily to alleviate
various foot-related diseases. Today, the insole that
can be fitted uniquely is perceived as an upgrade
for your shoe. The sole as a perfect link between
the foot and the shoe brings numerous benefits for
the wearer so that he or she can feel fit and fine.
Intelligent shock absorptions
The natural tissue pads of the heel are held under
the heel bone by the bowl-shaped construction
of the heel and it serves as the body‘s own shock
absorber.
Poron®Xrd™ high-tech shock-absorbing elements
have been crafted into the highly stressed regions
of the inlay as supplementary shock absorption. Any
shocks that occur can be avoided to a large extent
with the help of these without weakening the foot.
Supporting the natural
rolling movement
The natural rolling movement of the foot is supported by the construction of the anatomy.
Performance-enhancing
All these functions prevent overload and appearances
of weakness or fatigue of the foot –
optimal conditions for the best performance
5
Generally, soles are available in the market symmetrically - pairwise, but the feet of the wearer are not identical under
any circumstances. As the only product of its kind in the market, the Orthomove MultiFit system also permits separate
adjustment of the right and left feet, and in this manner, ensures a high level of perfect fit and customer satisfaction.
In the case of the Orthomove MultiFit system, special attention has been paid to dealer-friendly and customer-friendly
handling.
Thanks to the innovative modular system that makes separate models for supination, neutral and pronation superfluous,
the warehouse stocks or inventory required is reduced up to one third. As a result, maintaining inventory levels become
decisively reduced and easier for the dealer locally.
The integrated shock-absorbing parts included in the scope of supply have been provided with an innovative micro-Velcro
system and makes any tool superfluous. As a result, replacement becomes child‘s play and makes the final sale almost
self-explanatory.
control - full shape
It gives a solid grip and ensures perfect
transmission of force. It prevents weakness
and fatigue of the foot arising from overload
and conserves the joints and ligaments.
recommended for
all types of sports requiring a large amounts
of force that are applied in moulded shoes
or extremely strong shoes such as, for
example cross-country, ski, bike, skate...
In everyday use, this sole design is recommended for those who work for a long
time while standing or are exposed to high
levels of physical strain.
It is also available as an ultra-thin model,
for fashionable shoes such as sneakers and
gallantry shoes.
dynamic - v-shape
basic half-mould
This improves the lateral stabilisation and still
provides the freedom of movement required
in the region of the midfoot.
The flexible allround sole
that ensures comfort and lateral stability.
recommended for
minor supporting feature for almost all
types of sports and in everyday use to
enhance wearing comfort with limited
capability for adaptation and withstanding strain.
all dynamic types of sports with light-weight
footwear such as, for example, running.
In everyday use, this sole design is recommended for those who are on the move
without standing for long intervals.
It is also available as an ultra-thin model,
for fashionable shoes such as sneakers and
gallantry shoes.
recommended for
Multifit System
The MULTIFIT system is a modular insole system that consists of elements that can be replaced individually. With
the help of the support heels (+4 mm and +7 mm) the insole can be adapted individually to the respective type of
foot (longitudinal arch) of the wearer. Two additional and replaceable shock-absorbing elements enable customised
shock absorption and pressure distribution on the regions of the foot that are exposed to greater stress. Based on the
stress caused by the weight as well as unique demands on comfort by the wearer, these may be replaced on request.
7
for customised adjustment of the height to the natural arch of the foot
A thermal plate or the foot scan station provides information about the condition of
the foot – whether it is high-arched, normal or flat.
The module system includes two different
shock-absorbing elements that are used
depending on the load weight or according
to comfort feeling.
Based on this classification, the inlay is completed with 7 mm, 4 mm or no wedge at
all. ATTENTION: For shoes with a narrow cut or for Strobel soles - the heel here is one
size smaller since the construction of the shoe on its own has a supporting effect.
+4mm
solid
up to 60 kg
beyond 60 kg
4 - 7 mm
high-arched foot
normal foot
flat foot
raised, slanting outwards,
tending towards supination
natural and optimal shape with
good pressure distribution
lowered, slanting inwards,
tending towards pronation
Multifit System
0 - 4 mm
soft
Strobel sole
is provided in highly undercut shoes - primarily in sports shoes such as, for example,
those for running and hiking; the characteristics is a very tapered insole.
Take a heel one size smaller - for a flat foot only more +4 mm.
thermoprint
scheibe
item no. 50 9094 001
thermoprint
station
item no. 50 9094 202
scanner
station
item no. 50 9093 211
9
Individually replaceable elements and pads in combination
with application-specific model constructions yield the
Orthomove Multifit system - a complete inlay system that
ensures perfect fit for the wearer with comfortable wearing
characteristics.
NORDIC WALKING
MOVING ACTIVITY
GOLF
BUSINESS
BIKE
LEISURE
TENNIS
ULTRA-THIN
FOOTBALL
SWEAT MANAGEMENT
INLINE- / ICE SKATING
ANTIBACTERIAL
SKI
RUNNING
SKI TOURING
HIKING/MOUNTAINEERING
CROSS-COUNTRY
[ BASIC ]
ortho move
item no. 60 0000 101
for leisure and everyday use as well as light sports activities
+ anatomically shaped soft construction
+ promotes ideal conditions for the foot for active exercises
+ outer material: jersey
TREKKING
Multifit System [ BASIC ]
STANDING ACTIVITY
Recommended for:
11
airflow
item no. 61 1000 101
for leisure and everyday use as well as light sports activities
+ anatomically shaped soft construction
+ 100% air-permeable and breathable with unique perforation
+ promotes ideal conditions for the foot for active exercises
+ outer material: jersey
+ shock absorption for the heel and joint support can be adjusted separately
Recommended for:
[ ALLROUND ]
universal
item no. 61 2000 201
for leisure and everyday use as well as light sports activities
+ anatomically shaped soft construction
+ air-permeable mesh gives a good grip with comfortable conditions for the foot
+ outer material: mesh
+ shock absorption for the heel and joint support can be adjusted separately
Multifit System [ ALLROUND ]
[ ALLROUND ]
Recommended for:
13
[ SLIMLINE ]
item no. 62 2000 501
slimline-insole for maximum comfort
+ extremely thin construction, ideal for slim sports and business shoes
+ additional anatomically shaped v-type frame joint stabilisation permits torsional movements
+ outer material: leather
+ shock absorption for the heel and joint support can be adjusted separately
item no. 62 2000 101
slimline-insole for maximum comfort
+ extremely thin construction, ideal for slim sports and business shoes
+ additional anatomically shaped v-type frame joint stabilisation permits torsional movements
+ outer material: jersey
+ shock absorption for the heel and joint support can be adjusted separately
hidden
Recommended for:
ultrathin
Multifit System [ SLIMLINE ]
[ SLIMLINE ]
Recommended for:
15
[ DYNAMIC ]
ultrathin carbon silver
item no. 63 1000 401
slimline-high-tech insole
+ robust construction gives optimal stability
+ additional anatomically shaped full-frame joint stabilisation facilitates maximum
force transmission and enhances the performance
+ gives a good grip and ensures controlled rolling behaviour
+ carbon style
+ outer material: silvertech, antibacterial as a result of pure silver threads
+ shock absorption for the heel and joint support can be adjusted separately
Recommended for:
fit for work silver
item no. 64 5000 401
dynamic-high-tech insole for working shoes
+ dynamic construction ensures stability and maximum possible freedom of movement
+ additional anatomically shaped v-type frame joint stabilisation permits torsional movements
+ higher back foot shell provides excellent lateral stability
+ reduced undertread in the area of the protective toe cap
+ outer material: silvertech, antibacterial as a result of pure silver threads
+ electrical conductivity: cover + glue + eva parts
+ shock absorption for the heel and balls, and joint support can be adjusted separately
attention: it is strictly forbidden to use om fit for work in working shoes if the height of the toe
area is thicker than of the original insoles.
Multifit System [ DYNAMIC ]
[ SLIMLINE ]
Recommended for:
17
[ DYNAMIC ]
item no. 64 1000 501
dynamic-insole for business and leisure
+ dynamic construction for stability and for freedom of movement
+ additionally anatomical shaped v-type frame joint stabilisation permits torsional movements
+ higher back foot shell provides excellent lateral stability
+ outer material: leather
+ shock absorption for the heel and balls and the joint support can be adjusted separately
item no. 64 2000 301
dynamic-insole for sports and leisure activities
+ dynamic construction for stability and for freedom of movement
+ additional anatomically shaped v-type frame joint stabilisation permits torsional movements
+ higher back foot shell provides excellent lateral stability
+ outer material: resistant microfiber for a good grip
+ shock absorption for the heel and balls and the joint support can be adjusted separately
natural
Recommended for:
motion
Multifit System [ DYNAMIC ]
[ DYNAMIC ]
Recommended for:
19
running
[ DYNAMIC ]
item no. 64 2000 201
dynamic-insole guarantees more power and stability
+ dynamic construction ensures stability and maximum possible freedom of movement
+ additional anatomically shaped v-type frame joint stabilisation permits torsional movements
+ higher back foot shell provides excellent lateral stability
+ air-permeable mesh gives a good grip with comfortable conditions for the foot
+ outer material: mesh
+ shock absorption for the heel and balls, and joint support can be adjusted separately
Recommended for:
hiking
item no. 64 2000 311
dynamic-insole for all outdoor activities
+ dynamic construction ensures stability and best freedom of movement
+ 100% air-permeable and breathable with unique perforation
+ additional anatomically shaped v-type frame joint stabilisation permits torsional movements
+ higher back foot shell provides excellent lateral stability
+ outer material: resistant microfiber for a good grip
+ shock absorption for the heel and balls and the joint support can be adjusted separately
Multifit System [ DYNAMIC ]
[ DYNAMIC ]
Recommended for:
21
ski silver
[ CONTROL ]
item no. 65 1000 401
control-insole for skiing / touring / skating
+ robust construction enables optimal stability
+ additional anatomically shaped full-frame joint stabilisation
+ enables maximum transmission of force and provides good grip and control
+ enhances the performance and has a stabilising effect
+ higher back foot shell provides excellent lateral stability
+ outer material: silvertech, antibacterial as a result of pure silver threads
+ shock absorption for the heel and balls, and joint support can be adjusted separately
Recommended for:
carbon silver
item no. 65 2000 401
control-high-tech insole
+ robust construction enables optimal stability
+ additional anatomically shaped and highly robust full-frame facilitates maximum force transmission
+ enhances the performance, has a stabilising effect and provides excellent control
+ higher back foot shell provides excellent lateral stability
+ carbon style
+ outer material: silvertech, antibacterial as a result of pure silver threads
+ shock absorption for the heel and balls, and joint support can be adjusted separately
Recommended for:
Multifit System [ CONTROL ]
[ CONTROL ]
23
Several constructions are available in the existing market with the same consistent strength and thickness all through. Since the
human foot is highly unique and complex in order to place it simply on a hard or solid shaped plate, such systems are neither
meaningful nor expedient. Pure stiffening of the foot has the same effect as a plaster cast:
conservation, pain alleviation, and as a consequence of this, reduction in the muscular system, shutdown of the sensor system and
as a result, even loss of stability and performance.
The basis for the Orthomove MultiForm inlay system is formed by a high-tech plastic that can be moulded thermally and which, when
arranged in multiple anatomic construction levels facilitates the best possible support and relief of the natural flow of movement.
Different strengths and thicknesses of the material ensure, on the one hand, that the foot receives support where this is also actually
required. On the other hand, so-called flex zones are achieved to relieve the foot of the wearer or to guide them gently, as well as to
give adequate free space to the existing bones and muscles. In this manner, it is ensured that the sensor system is not impaired or barely
so, since this is critically responsible for the stability, performance and the well-being.
This type of inlay is rounded off by the use of appropriate covering materials as well as partially high-tech shock absorbers made of
PORON®-XRD™, and these can also be kept extremely thin with the help of precise moulding.
Flat sole design can be shaped 100%
to the foot. The foot is used here as the
mould to support it optimally.
heater
item no. 50 9091 001
vac 3d fit
item no. 50 9092 001
Multiform System
The foot is the shape for the customised sole - 100% adapted to the type of the foot and the purpose of use.
This is so because with the Orthomove MultiForm system, the shape is formed by direct thermal adaptation to the foot of the
wearer.
These are inlay constructions that are shaped most accurately to the foot of the wearer and can be customised 100% to his or
her needs. The reason for this is that this system has been created from development with the help of continuous cooperation
with medical professionals, sportspersons and orthopaedics.
The pre-moulded foot bed with the performance
-enhancing properties of the 3-D fit system fits
most shapes of the foot.
This is a special adaptation to your own foot
simply by heating and shaping.
With the help of this construction it has been possible to achieve stability and maximum pressure distribution and this, too, with an
extremely thin base construction with low weight. You can feel the difference!
25
The Multiform system is characterised by customised adaptation of the insoles. With the help of the Multi-vac system,
pre-shaped or still flat soles are adapted thermally and
facilitate a perfect and customised fit. The soles are provided
with high-tech shock absorption feature, consisting of the
Poron®Xrd™ material and provide the best performance and
stability.
NORDIC WALKING
MOVING ACTIVITY
GOLF
BUSINESS
BIKE
LEISURE
TENNIS
ULTRA-THIN
FOOTBALL
SWEAT MANAGEMENT
INLINE- / ICE SKATING
ANTIBACTERIAL
SKI
RUNNING
SKI TOURING
HIKING/MOUNTAINEERING
CROSS-COUNTRY
TREKKING
[ BASIC 3D ]
ski rent 3D
item no. 66 4320 104
3d-insole, 100% handmade in austria
+ pre-shaped insole using multiform 3d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ very thin in the heel region
+ outer material: jersey
Multiform System [ BASIC 3D ]
STANDING ACTIVITY
Recommended for:
27
allround 3D
[ SLIMLINE 3D ]
item no. 66 4320 114
3d-insole, 100% handmade in austria
+ pre-shaped insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ very thin in the heel region
+ outer material: jersey
Recommended for:
inkognito 3D
item no. 67 4311 504
slimline-3d-insole for business and leisure, 100% handmade in austria
+ slim-fit shaped for tight business- and leisure shoes with extremely low space requirement
+ pre-shaped insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ outer material: leather
+ high-tech xrd shock absorption for the heel
Multiform System [ SLIMLINE 3D ]
[ ALLROUND 3D ]
Recommended for:
29
+pro
also available
as flat insole
+pro
[ SLIMLINE 3D ]
triathlon 3D
item no. 67 4311 204
slimline-3d-insole for active sports and running activities, 100% handmade in austria
+ slim-fit shaped for tight sports- and leisure shoes with extremely low space requirement
+ pre-shaped insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ air-permeable mesh gives a good grip with comfortable conditions for the foot
+ outer material: jacquard mesh
+ high-tech xrd shock absorption for the heel
Recommended for:
[ SLIMLINE 3D ]
bike silver 3D
item no. 67 4612 404
slimline-3d-insole for cycling and mountain biking, 100% handmade in austria
+ slim-fit shaped for tight cycling shoes with extremely low space requirement
+ pre-shaped insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ outer material: silvertech, antibacterial as a result of pure silver threads
+ high-tech xrd shock absorption for the heel
Multiform System [ SLIMLINE 3D ]
also available
as flat insole
Recommended for:
31
trekking 3D
item no. 68 4311 304
dynamic-3d-insole for activities in sports and leisure, 100% handmade in austria
+ specially shaped for sports- and outdoor activities
+ pre-shaped insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ outer material: resistant microfiber for a good grip
+ high-tech xrd shock absorption for the heel
Recommended for:
[ DYNAMIC 3D ]
marathon 3D
item no. 68 4311 204
dynamic-3d-insole, for active sports and running activities, 100% handmade in austria
+ specially shaped for sports- and running shoes
+ pre-shaped insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ air-permeable mesh gives a good grip with comfortable conditions for the foot
+ outer material: mesh
+ high-tech xrd shock absorption for the heel
Recommended for:
Multiform System [ DYNAMIC 3D ]
[ DYNAMIC 3D ]
33
[ DYNAMIC 3D ]
allsports 3D pro
item no. 68 4311 103
dynamic-3d-insole for sports and leisure activities, 100% handmade in austria
+ specially shaped for many shoes and sports activities
+ flat insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ outer material: jersey
+ high-tech xrd shock absorption for the heel
Recommended for:
[ DYNAMIC 3D ]
golf silver 3D
item no. 68 4311 404
dynamic-3d-insole for sports and leisure activities, 100% handmade in austria
+ pre-shaped insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ outer material: silvertech, antibacterial as a result of pure silver threads
+ high-tech xrd shock absorption for the heel
Multiform System [ DYNAMIC 3D ]
available as
+ also
pre-shaped insole
Recommended for:
35
+pro
[ CONTROL 3D ]
light air 3D pro
item no. 69 4311 203
control-3d-insole for sports and leisure activities, 100% handmade in austria
+ more stability as a result of a wider shape for a higher shell
+ flat insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ air-permeable mesh gives a good grip with comfortable conditions for the foot
+ outer material: jacquard mesh
+ high-tech xrd shock absorption for the heel
Recommended for:
[ CONTROL 3D ]
ski athlete 3D
item no. 69 4620 304
control-3d-insole for skiing and touring, 100% handmade in austria
+ highly robust construction for stringent requirements of force transmission and control
+ pre-shaped insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ outer material: resistant microfiber for a good grip
+ high-tech xrd shock absorption for the heel
Recommended for:
Multiform System [ CONTROL 3D ]
also available
as flat insole
37
available as
+ also
pre-shaped insole
ski race 3D pro
[ CONTROL 3D ]
item no. 69 3622 003
control-3d-insole for skiing, 100% handmade in austria
+ specially for forming inliners as a result of a very stiff toe area
+ highly robust construction for stringent requirements of force transmission and control
+ flat insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ outer material: slip stop eva
+ high-tech xrd shock absorption for the heel
Recommended for:
carbon speed silver 3D pro
control-3d-high-tech insole, 100% handmade in austria
+ highly robust carbon construction for stringent requirements of force
transmission and control
+ flat insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ outer material: silvertech, antibacterial as a result of pure silver threads
+ high-tech xrd shock absorption for the heel
Recommended for:
item no. 68 4311 403
Multiform System [ CONTROL 3D ]
[ CONTROL 3D ]
39
ski & skate 3D pro
item no. 69 3620 003
control-3d-insole for skiing / touring / skating, 100% handmade in austria
+ highly robust construction for stringent requirements of force transmission and control
+ flat insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ outer material: slip stop eva
+ high-tech xrd shock absorption for the heel
Recommended for:
[ CONTROL 3D ]
heat 3D pro
item no. 69 4312 103
control-3d-insole for skiing and touring, 100% handmade in austria
+ lenz heating element provides high quality conditions for the foot, adjustable via lenz-app
+ highly robust construction for stringent requirements of force transmission and control
+ flat insole using multiform 3-d technology
+ simple and quick thermal adaptation with the help of the vac 3d system
+ moulding temperature at approx. 120°
+ cover material: jersey
+ high-tech xrd shock absorption for the heel
Multiform System [ CONTROL 3D ]
[ CONTROL 3D ]
Recommended for:
41
The flexible and thermoplastic mouldable high-tech plastic, together with the shock-absorbing material PORON®-XRD™
provides the best standard in impact protection technology.
The Orthomove MultiForm protectors provide reliable and permanent protection against severe impact, have a very long
life and are wear-resistant, thin, light-weight, flexible and, moreover, antibacterial. Air ducts serve to absorb moisture
for additional wearing comfort.
The protectors - worn directly on the skin or even between the socks and shoes - provide pressure distribution and strong
shock-absorption of the forces arising and prevent pressure points.
The flat pads for the shinbone or for the
instep, Achilles heel and ankle region can
be cut to size separately.
Multiform System - Protection
The pre-shaped pads for the shinbone can
be adapted to the contour of the shinbone
edge thermally at a temperature of 120
degrees and ensures 100% pressure
distribution as a result.
43
Item no. 50 4000 002
Protectors made of the high-tech material
PORON®-XRD™ with textile surface
The protectors can be placed directly on the skin of the shinbone
edge, or even between the socks and the shoes.
The height may be selected as required.
The protectors distribute the pressure and provide strong shock
absorption of the forces that occur. This prevents pressure points
to a large extent.
They can be specifically cut to size.
Outer material: Silver tech - antibacterial as a result of
pure silver threads
[ FLAT FLEX PADS]
Item no. 50 4000 401
Protectors made of the high-tech material
PORON®-XRD™ with textile surface
Pressure relief pads that can be used specifically for the instep,
Achilles heel and ankle region, which may be placed directly on the
skin or even between the socks and shoes.
The pads distribute the pressure and provide strong shock absorption of the forces that occur. This prevents pressure points to a
large extent.
They can be specifically cut to size.
Outer material: Silver tech - antibacterial as a result of
pure silver threads
Multiform System [FLAT FLEX PADS]
[ FLAT FLEX PADS ]
45
[ PRE-SHAPED PADS]
Item no. 50 4000 002
Item no. 50 4000 001
Protectors made of the high-tech material PORON®-XRD™
with a single-layer thermally mouldable surface.
The protectors can be placed directly on the skin of the
shinbone edge, or even between the socks and the shoes. The
height may be selected as required.
The pads distribute the pressure and provide strong shock
absorption of the forces that occur. This prevents pressure
points to the maximum possible extent.
It can be shaped thermally at 120 degrees.
Protectors made of the high-tech material PORON®-XRD™
with a double-layer thermally mouldable surface.
The protectors can be placed directly on the skin of the shinbone
edge, or even between the socks and the shoes.
The height may be selected as required.
The pads distribute the pressure and provide strong shock absorption of the forces that occur. This prevents pressure points to the
maximum possible extent.
It is meant to be shaped thermally at 120 degrees.
Multiform System [PRE-SHAPED PADS]
[ PRE-SHAPED PADS ]
47
SLIMLINE
ULTRATHIN CARBON SILVER
ULTRATHIN
HIDDEN
ALLROUN D
UNIVERSAL
AIRFLOW
BASIC
ORTHOMOVE
DYNAMIC
HIKING
RUNNING
MOTION
NATURAL
FIT FOR WORK SILVER
CO NT RO L
CARBON SILVER
SKI SILVER
BASIC 3D
ALLRO U ND 3 D
S LIM LI NE 3 D
ALLROUND 3D
INKOGNITO 3D
TRIATHLON 3D
TRIATHLON 3D PRO
MARATHON 3D
GOLF SILVER 3D
ALLSPORTS 3D
ALLSPORTS 3D PRO
LIGHTAIR 3D PRO
SKI ATHLETE 3D
SKI ATHLETE 3D PRO
SKI RACE 3D PRO
CARBON SPEED SILVER 3D
SKI&SKATE 3D PRO
HEAT 3D PRO
SKI RENT 3D
BIKE 3D
BIKE 3D PRO
DYNAMIC 3D
TREKKING 3D
CO NT RO L 3 D
CARBON SPEED SILVER 3D PRO
49
icons
sizes
A N A LY S I S
THERMOPRINT PLATE
THERMOPRINT STATION
STANDING ACTIVITY
SCANNER STATION
MOVING ACTIVITY
BUSINESS
LEISURE
ULTRA-THIN
SWEAT MANAGEMENT
ANTIBACTERIAL
RUNNING
HIKING/MOUNTAINEERING
item no. 50 9094 001
item no. 50 9094 202
item no. 50 9093 211
TREKKING
NORDIC WALKING
ADJUSTMENT
HEATER
VAC 3D FIT
GOLF
FITTINGSTATION MINI
BIKE
TENNIS
FOOTBALL
INLINE- / ICE SKATING
SKI
SKI TOURING
item no. 50 9091 001
item no. 50 9092 001
item no. 50 9080 002
CROSS-COUNTRY
51
T
E
N
.
E
V
O
M
HO
g
n
T
i
r
e
R
d
r
O
O
.
&
o
W
f
n
I
W
:
e
n
W
sily onli
a
e
d
n
a
quickly
ADOMUS GMBH
steiffstrasse 1, 4710 grieskirchen
austria
Tel: +43 7248 64440
Fax: +43 7248 64440-15
Mail: office@orthomove.net