FAIL-SAFE
DES C R IPTION
Fail-Safe’s LED sealed enclosure product is available with overlapping
and inset doors. Available in 1 x 1, 1 x 2, 1 x 4, 2 x 2 and 2 x 4 sizes, the
CLP Series cleanroom fixtures are Class 100 rated (English 209E), ISO
Class 5-8 rated, IP66 compliant, absent of holes for a robust seal from
above the ceiling, and NSF rated.
Catalog #
®
Type
Project
Comments
Date
Prepared by
SPE C IFIC A TION FEA T U R E S
M ou n t i n g
F a s te ne rs
Driver
Recessed grid for 1” or 1 1/2”
NEMA Type “G” ceiling systems.
Recessed flange for use with hardpan ceilings. Optional mounting
safety clips (4) available.
Captive, countersunk stainless steel
Philips head screws secure door
frame to the housing.
Electronic, standard 0-10V
dimming.
H ou s i n g
piece continuous closed-cell
silicone gasket seals lens to door
frame.
Die-formed, heavy gauge steel,
powder coat painted white. Seamwelded construction, absent of
holes. Optional stainless steel
(Type 304 or 316) or aluminum.
Door
Overlapping door, constructed
of one piece die-formed steel,
stainless steel (304 standard, 316
optional) or aluminum.
Inset door, constructed of dieformed steel, stainless steel
(304 standard, 316 optional), or
aluminum. All doors attached to
the housing with two stainless
steel aircraft cables.
Fin ish
G a s ke ti ng
L e ns to D oor Frame: One
D oor F ra me to Hou sing or
Ce i l i ng: One piece continuous
High gloss, electrostatically
applied, white powder coat finish,
average minimum reflectance 92%.
Co mplian ce/R atin g s
closed-cell silicone gasket.
Hous i ng to G ri d: Closed-cell
silicone gasket.
Class 100
ISO Class 5-8
IP66
100PSI
NSF2
L e ns
Labels
Pattern 12 acrylic, 0.125” thick,
inverted. Other lenses available,
including polycarbonate and glass.
L ED
LEDs available in 3000K, 3500K,
4000K, and 5000K with 85 CRI.
Life is 50,000 hours at 70% lumen
maintenance.
ETL listed for wet locations under
covered ceilings.
CLP
Sealed/ Cleanroom
RECESSED FLANGE
RECESSED GRID
2x4/2x2
1x4/1x2/1x1
Inset or Overlapping Door
Wet Location
IP66 Rated
ISO Class 5, 6, 7, 8
100PSI
NSF Rated
ADC141384
2014-12-01 11:08:59
CL P - 1 X 1, 1 X 2, 1 X 4 , 2 X 2 , 2 X 4
ORDER ING INFOR M A TION
SAMPLE NUMBER: CLPF-12-4-ALH-INA-A12125-LD3-2STD-40-UNV-ED2C-AMD
CLPG-24-2-ALH-INA-A19156-LD3-4STD-50-UNV-ED1C-EL10W-DF-AMA
Product
Family
Width Length
Housing Material
Door Type
Lens
LEDs
CLP_
No. of Illumination Color
LEDs
Level
Temp. Voltage Driver Options
LD3
Series
CLPF=Recessed 3
Flange
CLPFE=Recessed
3
Flange Extended
CLPG=Recessed Grid
4
(1", 1-1/2" NEMA G)
Inset Die Formed,
One Piece
INS=Inset Door,
Die-formed Steel,
Painted White
INA=Inset Door,
Die-formed Aluminum,
Painted White
INSSP=Inset Door,
Die-formed Stainless
Steel, Painted White
(Replace P with B
for Brushed)
Overlapping, One Piece
OLS=Overlapping Door,
Die-formed Steel,
Painted White
OLA=Overlapping Door,
Die-formed Aluminum,
Painted White
OLSSP=Overlapping Door,
Die-formed Stainless Steel,
Painted White - (Replace P
with B for Brushed)
OLSS316P=Overlapping
Door, Die-formed Stainless
Steel (316), Painted White (Replace P with B for
Brushed)
24=24" Wide
12=12" Wide
1=1' Length
2=2' Length
4=4' Length
Blank=Cold Rolled Steel, Powder
Coat Painted White
ALH=Aluminum Housing,
Painted Powder Coat White
SHB=Stainless Steel (304) Brushed
SH316B=Stainless Steel (316) Brushed
SHP=Stainless Steel (304)
Powder Coat Painted White
SH316P=Stainless Steel (316)
Powder Coat Painted White
120=120V
277=277V
UNV=120-277V
A12125=Pattern 12
Acrylic, 0.125" Thick,
Inverted
A19156=Pattern 19,
0.156" Thick, Inverted
P12125=Pattern 12
Polycarbonate, 0.125"
Thick, Inverted
ED1C=Electronic Driver,
non-dimming, 1 circuit 1
ED2C=Electronic Driver,
1
non-dimming, 2 circuit
ED3C=Electronic Driver,
non-dimming, 3 circuit 1, 2
ED4C=Electronic Driver,
1, 2
non-dimming, 4 circuit
ED1D=Electronic Driver,
dimming, 1 circuit 1
ED2D=Electronic Driver,
dimming, 2 circuit 1
ED3D=Electronic Driver,
1, 2
dimming, 3 circuit
ED4D=Electronic Driver,
dimming, 4 circuit 1, 2
Other Lenses / thicknesses
available, consult factory or
Lens Ordering Guide on
web-site
LD3=Linear LED, Version 3.0
1=(1) LED Module in X-section
2=(2) LED Modules in X-section
3=(3) LED Modules in X-section
(2' Width Only)
4=(4) LED Modules in X-section
(2' Width Only)
EL5W=5W EM Pack 6, 7
EL10W=10W EM Pack 6, 7
EL20W=20W EM Pack 5, 6
AMA=Anti-microbial, All Parts
AMD=Anti-microbial, Door Only
DF=Diffusing Film
MSC4=Mounting Safety Clips
(4) with Hardware
STD=Standard
LO=Low
HI=High
30=3000K
35=3500K
40=4000K
50=5000K
Accessories
1. Dimming driver Standard ED1C, 2C, 3C, 4C - low voltage dimming control wires not connected.
ED1D, 2D, 3D, 4D - low voltage control wires connected and presented at access plate.
2. ED3C, 3D, 4C, 4D only available with 4’ length fixtures.
3. Flange and extended flange ship standard with (4) Swing-out brackets for quick and easy installation.
4. Hard metric fixtures available (600mm x 600mm, 300mm x 1200mm, 600mm x 1200mm). Consult
product technical support to verify ceiling compatibility (Main-T height and width, Cross-T height and
width, other related specifications).
5. EL20W adds 3” to fixture height.
6. Specify voltage.
7. 2x2 fixture with ED2C or ED2D requires emergency battery pack to be mounted on fixture back, adding 3” to fixture height.
2' x 2'
MSC4-PK=Mounting Safety Clips
(4) with Hardware
2' x 4'
No. of Modules,
Level
Input Watts
Delivered
Lumens*
1' x 4'
No. of Modules,
Level
Input Watts
Delivered
Lumens*
No. of Modules,
Level
Input Watts
Delivered
Lumens*
2LO
26
2000
2LO
52
4000
1LO
26
2050
2STD
38
2800
2STD
74
5600
1STD
37
2850
2HI
47
3600
2HI
94
7200
1HI
47
3650
3LO
39
3000
3LO
78
6000
2LO
52
4100
3STD
57
4200
3STD
111
8800
2STD
74
5700
3HI
72
5400
3HI
141
10800
2HI
94
7300
4LO
52
4000
4LO
104
8000
4STD
76
5600
4STD
148
11200
4HI
96
7200
4HI
188
14400
* Approximate delivered lumens.
* Verify with actual photometric test reports.
* A12125 lens.
* DF option decreases delivered lumens by ~12%.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADC141384
2014-12-01 11:08:59
CL P - 1 X 1, 1 X 2, 1 X 4 , 2 X 2 , 2 X 4
Flange
Grid
1’ Wide, Inset Door
1’ Wide, Inset Door
10-3/8" [264mm]
7-7/8" [201mm]
4-3/4"
[121mm]
5-3/16"
[132mm]
3-1/2"
[89mm]
10-3/8" [264mm]
11-3/4" [298mm]
11-3/4" [298mm]
1’ Wide, Overlapping Door
1’ Wide, Overlapping Door
10-3/8" [264mm]
7-7/8" [201mm]
4-3/4"
[121mm]
3-1/2"
[89mm]
5-3/16"
[132mm]
10-3/8" [264mm]
11-3/4" [298mm]
11-3/4" [298mm]
11-7/8" [302mm]
2’ Wide, Inset Door
2’ Wide, Inset Door
19-7/8" [505mm]
22-3/8" [568mm]
5-3/16"
[132mm]
4-1/4"
[108mm]
3-1/2"
[89mm]
22-3/8" [568mm]
23-3/4" [603mm]
23-3/4" [603mm]
2’ Wide, Overlapping Door
2’ Wide, Overlapping Door
22-3/8" [568mm]
19-7/8" [505mm]
5-3/16"
[132mm]
4-1/4"
[108mm]
3-1/2"
[89mm]
22-3/8" [568mm]
23-3/4" [603mm]
23-3/4" [603mm]
Swing-out Bracket - Standard
Cut-Out Dimensions
1x4
10-5/8” x 46-5/8”
1x2
10-5/8” x 22-5/8”
1x1
10-5/8” x 10-5/8”
2x4
22-5/8” x 46-5/8”
2x2
22-5/8” x 22-5/8”
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
ADC141384
2014-12-01 11:08:59