Conductors (Cables)
Aluminum
No. A1
No. A2
No. A3
No. A4
No. A9
24 strands
14 AWG.
26 strands
14 AWG.
28 strands
14 AWG.
4/0 Soft
#4 AWG. Soft
98,640 CM.
106,860 CM.
115,080 CM.
211,600 CM.
41,740 CM.
98 lbs. per 1,000 ft.
105 lbs. per 1,000 ft.
115 lbs. per 1,000 ft.
204 lbs. per 1,000 ft.
40 lbs. per 1,000 ft.
Smooth Weave Copper – Tinned Coated – Lead Coated
No. C1
No. C3
No. C4
No. C10
No. C15
29 strands
32 strands
34 strands
28 strands
#6 AWG Soft
17 AWG.
17 AWG.
17 AWG.
14 AWG.
59,450 CM.
65,600 CM.
73,000 CM.
115,080 CM.
28,700 CM.
190 lbs. per 1,000 ft.
210 lbs. per 1,000 ft.
220 lbs. per 1,000 ft.
375 lbs. per 1,000 ft.
92 lbs. per 1,000 ft.
Concentric Strand Copper
No. C5
No. C6
No. C7
No. C8
No. C11
No. C12
1/0
2/0
3/0
4/0
#250 MCM
#500 MCM
98,640 CM. 326 lbs. per 1,000 ft.
131,520 CM. 411 lbs. per 1,000 ft.
167,800 CM. 518 lbs. per 1,000 ft.
211,600 CM. 653 lbs. per 1,000 ft.
250,000 CM. 772 lbs. per 1,000 ft.
500,000 CM. 1,555 lbs. per 1,000 ft.
Installation By: Quality Lightning Protection, Inc., Raleigh, NC 919-832-9399 • Materials by Capital Lightning Protection, Co. Raleigh, NC
“A” preceding any number indicated Aluminum, “B” indicates Bronze, “C” indicates Copper
Air Terminals, Accessories, Ground Rods
Copperweld Ground Rods
Air Terminals
Aluminum, Copper, Chrome Tipped, Chrome
Plated, Nickel Tipped, Nickel Plated, Lead Coated,
Lead Covered
No. 50
No. 51
No. 52
No. 53
No. 54
No. 55
No. 56
No. 57
No. 58
No. 59
No. 60
No. 61
No. 62
No. 63
No. 64
No. 65
____
3/8 in. x 10 in.
3/8 in. x 12 in.
3/8 in. x 15 in.
3/8 in. x 18 in.
3/8 in. x 24 in.
1/2 in. x 10 in.
1/2 in. x 12 in.
1/2 in. x 15 in.
1/2 in. x 18 in.
1/2 in. x 24 in.
5/8 in. x 36 in.
5/8 in. x 10 in.
5/8 in. x 12 in.
5/8 in. x 15 in.
5/8 in. x 18 in.
5/8 in. x 24 in.
Special Order
Diameter ______
Length ________
No. 1001
No. 1002
No. 1003
_______
1/2 in. x 10 ft.
5/8 in. x 10 ft.
3/4 in. x 10 ft.
Special Order
Diameter ______
Length ________
Ground Plate
No. 1300 17” x 17” .032 copper
ground plate. Other sizes available.
Ground Rod Clamp
Cast bronze with 2 5/16” s.s. set screws.
1 1/2” cable to rod contact surface.
No. 213
1/2” ground rod clamp
No. 214
5/8” ground rod clamp
No. 215
3/4” ground rod clamp
No. A-161, B-161
Cast aluminum or bronze adjustable
point adapters. Swivel action permits
point to sit vertically when base is attached to sloping surface. Standard N.C.
threads with male to male, male to female, or female to female connections
provided. Hexagonal tightening section.
Available in 3/8” (bronze only), 1/2” and
5/8”. Specify size.
No. A-160, B-160
Solid aluminum or bronze rod couplings
and adapters. Standard N.C. threads with
male to male, male to female, or female to
female with connections provided. 1 1/4
long with hexagon tightening section.
Available in 3/8” (bronze only), 1/2” and
5/8”. Specify size.
Installation By: Quality Lightning Protection, Inc., Raleigh, NC 919-832-9399 • Materials by Capital Lightning Protection, Co. Raleigh, NC
“A” preceding any number indicated Aluminum, “B” indicates Bronze, “C” indicates Copper
Air Terminal (Point) Bases
No. A-101, B-101
No. A-103, B-103
Cast aluminum or bronze point base for ridged roofs, sloping or flat surfaces
(easily conforms to pitch).Provides positive bolt tension cable
clamping. Includes holes for standard nails or metal screws.
Furnished for 3/8” (bronze only), 1/2” and 5/8”
points (specify size).
No. A-107, B-107
No. A-106, B-106
Cast aluminum or bronze
point base for vertical surfaces with
horizontal cable run. Point offset
1 3/4” to clear wall cap or cover
overhang. Positive stainless steel
bolt tension cable clamping. Two
mounting holes for bolts or screws.
Available in 3/8” (bronze only), 1/2” and
5/8” points (specify size).
Cast aluminum or bronze side ridge
point base hides mounting on roof
backside. Bends to roof pitch and
attaches below ridge cap or ridge vent
with point extending at least 10”
above ridge vent. Bolt tension
cable holder with 2 1/2” contact
and 4 anchor holes for nails or
screws. Available in 3/8” (bronze
only), 1/2” and 5/8” point
diameters (specify size).
No. A-105, B-105
Handrail Base
No. A-117, B-117
Cast aluminum or bronze point base for
anchoring without penetrating flat or
gently sloping surfaces. Positive stainless
steel single bolt tension cable clamping. Use
with roofing compound or commercial adhesive on roofs or similar surfaces. Available in 3/8” (bronze only), 1/2” and 5/8”
points (specify size).
Cast aluminum or bronze pipe mount
point base with point coupling for
horizontal pipe. Available in 3/8”
(bronze only), 1/2” and 5/8” points
(specify size).
No. A-118, B-118 Universal Base
Cast aluminum or bronze point base for
top or side mount attachment with screws
or anchors. Adhesive point for mounting
on flat surfaces without penetrating the
metal or roof surface. Available in 3/8”,
1/2” and 5/8” points (specify size).
Installation By: Quality Lightning Protection, Inc., Raleigh, NC 919-832-9399 • Materials by Capital Lightning Protection, Co. Raleigh, NC
“A” preceding any number indicated Aluminum, “B” indicates Bronze, “C” indicates Copper
Cable Connectors
No. 200 Bimetallic 4-Bolt Straight Splicer
For joining aluminum and copper cables. Stainless steel bolts.
No. 200-EC
Bimetallic Round to Round
Cast bimetallic bolt pressure clamp for
joining 2 dissimilar cables. Aluminum
two-way cast top. Bronze two-way cast
bottom. Specifically designed for cable splices on single membrane roofs.
Stainless steel spacer plate.
No. A-212, B-212
Cast aluminum or bronze combination cable to wire
or miniature cable splicer with positive bolt tension
grip on cable and wire. For full-size cables on one
side and secondary wires or cables on the other.
No. A-259, B-259
Cast aluminum or bronze cable splicer with
two 1/4” stainless steel bolts for cable tension.
Use for two cables crossing in continuing runs.
No. A-205, B-205, T-205
Cast aluminum or bronze cable splicer
(2” long) for cable splicing with one 1/4”
stainless steel bolt for cable tension.
No. A-206, B-206, T-206
Cast aluminum or bronze cable splicer
(4” long) with two 1/4” stainless steel bolts
for cable tension.
No. A-202, B-202
Cast aluminum or bronze tee cable splicer
with positive bolt tension cable grip and
two 1/4” stainless steel bolts.
For all full-size cables.
No. A-225, B-225
Cast aluminum or bronze right
angle clamp with two 1/4” stainless
steel bolts for positive cable tension. Connects cable
with 3/8” (bronze only), 1/2” and 5/8” threaded rod (specify size).
Installation By: Quality Lightning Protection, Inc., Raleigh, NC 919-832-9399 • Materials by Capital Lightning Protection, Co. Raleigh, NC
“A” preceding any number indicated Aluminum, “B” indicates Bronze, “C” indicates Copper
Roof Accessories and Cable Fasteners
No. A-309, C-309
Stamped aluminum or copper adhesive cable holder.
Set in adhesive on flat or gently sloping surface.
No. 66 Thru-Roof Assembly
For cable run under roof includes cable connector, 12” long
threaded rod, nuts and washers. Also made to order various lengths.
Beam Clamp
Cast aluminum, bronze or galvanized steel up to 1/2”
thick. One 1/4” bolt provides tension. To support
cable to beam clamp use #301 or #303
A-304 Aluminum, B-304 Bronze, G-304 Galvanized Steel
No. A-303, C-303
Cable Loop Fastener
Strap aluminum or copper cable loop fastener 5/8” wide
and 0.050” thick (aluminum) or 0.032” thick (copper). For
cables 3/8” to 5/8” diameter. Requires one nail or screw 1/4” maximum diameter.
No. 162 Tripod Brace
No. 320 Drive-In Anchor
Galvanized steel tripod brace for
supporting long air terminals.
One piece drive-in anchor, 1/4” x 1 1/4”,
with stainless steel drive pin.
No. 316 Tek Screw
Hex head stainless steel tek screw self-taps
metal up to 1/4” thick.
421 Pourable Sealer Rubber Roofs
422 Silicone Rubber Caulk & Adhesive
423 ChemLink M-1
High Strength Adhesive & Sealant
Installation By: Quality Lightning Protection, Inc., Raleigh, NC 919-832-9399 • Materials by Capital Lightning Protection, Co. Raleigh, NC
“A” preceding any number indicated Aluminum, “B” indicates Bronze, “C” indicates Copper
Bonding Connections
No. A-217, B-217, T-217
Cast aluminum or bronze grounding clamp. Aluminum
clamps are for television antennas or other metal pipes.
Bronze clamps are for water pipes or similar pipes. Two
5/16” x 2” stainless steel bolts maintain positive tension. Fits 1 5/8” to 2 1/2 O.D. pipe. Use with all full
size cables.
No. A-224, B-224
Cast aluminum or bronze bonding lug with bolt
tension grip on cable. Available for 1/4”, 3/8”, 1/2”,
5/8” bolts. Use with all full size cables.
No. A-253, B-253, T-253
Cast aluminum or bronze flat metal bonding plate with
8 square inch contact surface. Stainless steel bolt
tension grip on cable. Use with all full size cables.
No. A-259W, B-259W, A-259H, B-259H
Heavy cast aluminum or bronze bonding clamp with
4” cable clamp for bonding cable to metal without
piercing metal. Contact pressure over
8” square. Available in half size
Installation By: Quality Lightning Protection, Inc., Raleigh, NC 919-832-9399 • Materials by Capital Lightning Protection, Co. Raleigh, NC
“A” preceding any number indicated Aluminum, “B” indicates Bronze, “C” indicates Copper