BusDor Catalog − Specification Sheet RS−485/422/232 120 Ω 4x2x24 AWG SFTP PVC jacket BUD−DOR cable Teldor P/N 9392004XXX GENERAL CONSTRUCTION This is a 120 Ω impedance cable, designed for EIA RS−485/422 and RS−232 applications. The cable contains 4 twisted pairs, shielded with an overall polyester−aluminum foil and an overall copper−braid and jacketed with PVC compound for fixed or portable installations. 1. Basic Wires: 1.1. Conductor : Stranded tinned−copper, 7x0.203 mm (24 AWG). 1.2. Insulation: Solid PE. 2. Pairs Construction: 2.1.Total number of pairs: 4 2.2. Color code: Blue x White/Blue Orange x White/Orange Green x White/Green Brown x White/Brown 3. Pair arrangement: The four pairs are cabled together and wrapped with separation tapes. 4. Overall shield: 4.1. Polyester−aluminum foil, providing 100% coverage, with the foil face out, laid in close contact with a tin−plated, 24 AWG stranded (7x0.20 mm) drain−wire. 4.2. Braided shield, made of tinned−copper, providing 90% coverage min. 5. Overall jacket: 5.1. Material: PVC compound. 5.2. Color : per request. 5.3. Marking : Per request, otherwise TELDOR standard marking. 5.4. Overall diameter: 9.6 mm nominal. 6. Electrical properties: 6.1. DC Resistance : 94.0 Ω/km, max. @ 20C, 6.2. Impedance : 120 ± 15 Ω @ 1 MHz. 6.3. Capacitance : 42 pF/m nominal @ 1 KHz. 6.4. Voltage rating : 230 V rms . 6.5. Dielectric strength: 1000 Volts/1 minute. 6.6. Attenuation : 21.3 dB/Km max. @ 1 MHz. 72.2 dB/Km max. @ 10 MHz. 102.0 dB/Km max. @ 20 MHz. 6.7. Velocity of Propagation: 66% minimum. 7. General properties: 7.1. Total weight: 116 Kg/Km nominal. 7.2. Temperature range: −10C to +50C. 7.3. Flame test: IEC 332.1. Prepared By: Prepared By: JACOB BEN−ARY Revised By: Revised By: JACOB BEN−ARY Revision No: Revision No: 3 Date: Date: 24−November−2005 1/1