9197 WIKA 20PP changes_2007
12/2/08
5:09 PM
Page 1
pressure
I
N
S
T
R
U
M
E
N
T
A
T
I
O
N
Part of your business
Pressure and
Temperature Measurement
9197 WIKA 20PP changes_2007
12/2/08
5:09 PM
Page 2
Part of your business
At WIKA, we understand that even the smallest pressure gauge is an
important part of your business. That’s why we are committed to providing
exceptionally accurate and reliable pressure and temperature measurement
solutions that meet your constantly evolving business needs.
Our commitment is demonstrated by our significant global investment in
technology, manufacturing and R&D. This investment enables us to
develop innovative products and system solutions that also offer value
for money.
WIKA’s comprehensive range of quality mechanical and electronic pressure
and temperature instrumentation includes pressure gauges, switches,
transmitters and transducers, diaphragm seals, thermometers,
thermocouples, resistance thermometers, temperature transmitters,
thermowells and accessories.
Our products are supported by onsite service and calibration, after sales
support and two instrument workshops based in Sydney and Melbourne.
These workshops specialise in producing quality, customised
products quickly.
For more than 50 years, businesses around the world have made WIKA
Alexander Wiegand GmbH & Co products part of their business. Today,
WIKA is represented in 100 countries throughout the world and has more
than 3000 employees located in over 20 countries.
In Australia, WIKA’s worldwide resources are complemented by more than
100 years of combined local experience, following the 1998 WIKA acquisition
and merger of Dobbie Instruments and Budenberg Gauges Australia.
WIKA is ISO certified and NATA accredited.
Pressure and
Temperature Measurement
9197 WIKA 20PP changes_2007
12/2/08
5:09 PM
Page 3
two
Industrial gauges
four
Process gauges
six
Differential gauges
eight
Safety pattern gauges
nine
Oxygen gauges
nine
Capsule gauges
nine
Diaphragm gauges
nine
Diaphragm seals
Pressure transmitters
ten
twelve
Calibration equipment
fourteen
NATA capabilities
fourteen
Test gauges
Pressure switches
fifteen
sixteen
Indicating pressure switches
seventeen
Square and rectangular gauges
seventeen
Bottle and can testers
seventeen
Accessories
seventeen
Pressure conversion table
back page
contents
Standard gauges
9197 WIKA 20PP changes_2007
12/2/08
5:09 PM
Page 4
Type 111.10
WIKA standard pressure gauges are designed for long and reliable service under rugged
conditions. Some typical applications include pumps, hydraulic and pneumatic systems,
compressors, and as a contractor’s gauge. The gauges can also be used for many other
applications where the measured media does not corrode brass.
WIKA standard pressure gauges feature a black plastic case (steel cases are available as an
option) and a helical Bourdon tube for 6000 kPa and higher. The low friction Swiss movement
ensures a long, reliable service life.
Data sheet PM 01.01
Standard features
Size: 40mm, 50mm, 63mm,
Model
111.10
Nominal size
40mm
Design
50mm
63mm
63mm
100mm
100mm
Wetted parts: Copper alloy
Case: Black plastic
Window: Snap fit clear plastic
Dial: White plastic-Dual scale
kPa/psi
Pointer: Black plastic
Accuracy: ±2.5% of span
(EN 837)
Maximum process
temperature: 60ºC
• Copper alloy wetted parts
• Black plastic case
• Cost effective design
Case
Mounting
Connection
Scale range
-100/0 kPa
-100/150 kPa
-100/300 kPa
-100/500 kPa
-100/900 kPa
0/100 kPa
0/160 kPa
0/250 kPa
0/400 kPa
0/600 kPa
0/800 kPa
0/1000 kPa
0/1600 kPa
0/2500 kPa
0/4000 kPa
0/6000 kPa
0/8000 kPa
0/10x1000 kPa
0/16x1000 kPa
0/25x1000 kPa
0/40x1000 kPa
Black plastic
Black steel
Direct
bottom
Direct
bottom
Direct
bottom
Surface
bottom
Direct
bottom
1/8"BSP taper
1/8"BSP taper
1/4"BSP taper
1/4"BSP taper
3/8"BSP taper
530.9628933.10
530.9628934.10
530.9628935.10
530.9628936.10
530.9628937.10
530.9628938.10
530.9628939.10
530.9628941.10
530.9628942.10
530.9628943.10
530.9628977.10
530.9628944.10
530.9628945.10
530.9628946.10
530.9628947.10
530.9628948.10
530.9628949.10
530.9628950.10
530.9628951.10
530.9628952.10
530.9628953.10
530.9665022.10
530.9665023.10
530.9665024.10
530.9665025.10
530.9665027.10
530.9665028.10
530.9665029.10
530.9665031.10
530.9665032.10
530.9665033.10
530.9665046.10
530.9665034.10
530.9665036.10
530.9665037.10
530.9665038.10
530.9665039.10
530.9665040.10
530.9665041.10
530.9665042.10
530.9665044.10
530.9665045.10
530.9144991.10
530.9144992.10
530.9144993.10
530.9144995.10
530.9144996.10
530.9144997.10
530.9144998.10
530.9144990.10
530.9145000.10
530.9145003.10
530.9145016.10
530.9145002.10
530.9145005.10
530.9145004.10
530.9145007.10
530.9145008.10
530.9145009.10
530.9145011.10
530.9145012.10
530.9145013.10
530.9145014.10
530.9144991.11
530.9144992.11
530.9144993.11
530.9144995.11
530.9144996.11
530.9144997.11
530.9144998.11
530.9144990.11
530.9145000.11
530.9145003.11
530.9145016.11
530.9145002.11
530.9145005.11
530.9145004.11
530.9145007.11
530.9145008.11
530.9145009.11
530.9145011.11
530.9145012.11
530.9145013.11
530.9145014.11
530.15000
530.15001
530.15002
530.15003
530.15004
530.15005
530.15006
530.15007
530.15008
530.15009
530.15010
530.15011
530.9129855.10
530.9395364.10
530.15014
530.15015
530.15016
530.15017
530.15018
530.15019
530.15020
Page two
9197 WIKA 20PP changes_2007
12/2/08
5:09 PM
Page 5
service as standard Type 111.10 gauges, but are designed for direct or
flush mounting. They feature a black plastic case and low friction Swiss
movement to ensure a long, reliable service life.
Data sheet PM 01.10
Standard features
Size: 40mm, 50mm, 63mm
Model
Nominal size
Design
111.16
40mm
50mm
63mm
Direct
rear axial entry
Direct
rear axial entry
Direct
rear axial entry
1/8"BSP taper
1/8"BSP taper
1/4"BSP taper
530.9628954.20
530.9628955.20
530.9628956.20
530.9628957.20
530.9628958.20
530.9628960.20
530.9628961.20
530.9628962.20
530.9628963.20
530.9628964.20
530.9628978.20
530.9628965.20
530.9628966.20
530.9628968.20
530.9628969.20
530.9628970.20
530.9628971.20
530.9628972.20
530.9628973.20
530.9628974.20
530.9628976.20
530.9617401.20
530.9617402.20
530.9617403.20
530.9617404.20
530.9617406.20
530.9617407.20
530.9617408.20
530.9617409.20
530.9617410.20
530.9617411.20
530.9617427.20
530.9617412.20
530.9617415.20
530.9617416.20
530.9617417.20
530.9617419.20
530.9617420.20
530.9617422.20
530.9617423.20
530.9617424.20
530.9617425.20
530.9145018.20
530.9145019.20
530.9145020.20
530.9145021.20
530.9145022.20
530.9145024.20
530.9175025.20
530.9145026.20
530.9145027.20
530.9145029.20
530.9145042.20
530.9145030.20
530.9145032.20
530.9145033.20
530.9145034.20
530.9145035.20
530.9145037.20
530.9145038.20
530.9145039.20
530.9145040.20
530.9145041.20
Wetted parts: Copper alloy
Case: Black plastic
Mounting
Window: Snap fit clear plastic
Dial: White plastic-Dual scale kPa/psi
Pointer: Black plastic
Accuracy: ±2.5% of span (EN 837)
Maximum process
temperature: 60ºC
• Copper alloy wetted parts
• Black plastic case
• Gauges for direct or flush mounting
Connection
Scale range
-100/0 kPa
-100/150 kPa
-100/300 kPa
-100/500 kPa
-100/900 kPa
0/100 kPa
0/160 kPa
0/250 kPa
0/400 kPa
0/600 kPa
0/800 kPa
0/1000 kPa
0/1600 kPa
0/2500 kPa
0/4000 kPa
0/6000 kPa
0/8000 kPa
0/10x1000 kPa
0/16x1000 kPa
0/25x1000 kPa
0/40x1000 kPa
Flush
(3 hole)
Substitute .22K
Page three
Flush
(Clamp)
Substitute .23K
G A U G E S
WIKA Type 111.16 pressure gauges offer the same long and reliable
standard
Type 111.16
9197 WIKA 20PP changes_2007
12/2/08
5:09 PM
Page 6
Type 213.53
The robust WIKA Type 213.53 pressure gauges have a stainless steel case and liquid filling.
They are intended for adverse service conditions where pulsation or vibration exists. They are
also suitable for gaseous or liquid media that will not obstruct the pressure system or
attack copper alloy parts.
Model
Nominal size
Design
Mounting
Data sheet PM 02.12
Accuracy
Standard features
Size: 63mm, 100mm
Wetted parts: Copper alloy
Case: Stainless steel
Bezel ring: Polished stainless steel
Window: Clear plastic
Dial: White plastic (63mm),
White aluminium (100mm)
Pointer: Black plastic (63mm),
Black aluminium (100mm)
Filling: Glycerine
Accuracy: ±1.6% of span 63mm,
±1.0% of span 100mm (EN 837)
Maximum process
temperature: 60ºC
• Copper alloy wetted parts
• Stainless steel case
Hydraulic Gauges
• Glycerine filled
213.53
63mm
100mm
Direct
Direct
Flush
bottom
rear or (Clamp)
±1.6% of full scale deflection
Connection
Scale range
-100/0 kPa
-100/60 kPa
-100/150 kPa
-100/300 kPa
-100/500 kPa
-100/900 kPa
-100/1500 kPa
0/60 kPa
0/100 kPa
0/160 kPa
0/250 kPa
0/400 kPa
0/600 kPa
0/800 kPa
0/1000 kPa
0/1600 kPa
0/2500 kPa
0/4000 kPa
0/6000 kPa
0/8000 kPa
0/10x1000 kPa
0/16x1000 kPa
0/25x1000 kPa
0/40x1000 kPa
0/60x1000 kPa
0/80x1000 kPa
0/100x1000 kPa
1/4" BSP taper
Dual scale kPa/psi
530.9312604.10
530.9312905.23
530.9312612.10
530.9312914.23
530.9312620.10
530.9312922.23
530.9312638.10
530.9312930.23
530.9312646.10
530.9312948.23
530.9312655.10
530.9312956.23
530.9312663.10
530.9312965.23
530.9312671.10
530.9312973.23
530.9312689.10
530.9312981.23
530.9312697.10
530.9312999.23
530.9312701.10
530.9313006.23
530.9312719.10
530.9313015.23
530.9312727.10
530.9313023.23
530.9312735.10
530.9313031.23
530.9312744.10
530.9313049.23
530.9312752.10
530.9313057.23
530.8349660.10
530.9313065.23
530.9311292.10
530.9313074.23
530.9312760.10
530.9313082.23
530.9312778.10
530.9313090.23
530.9312786.10
530.9313104.23
530.9312795.10
530.9313112.23
530.9312808.10
530.9313120.23
530.9312816.10
530.9313138.23
530.9312825.10
530.9313146.23
530.9312833.10
530.9313155.23
Model
Mounting
213.53.063
Direct
Direct
Flush
bottom
rear or (Clamp)
G1/4 B (1/4" BSP parallel)
Dual scale bar/psi
509.9022199.10
509.9022200.20
509.9022156.10
509.9022127.20
509.9024958.10
509.9022164.20
509.9327660.10
509.9027452.20
509.9605015.10
509.9023476.20
509.9351154.10
509.9605075.20
509.9315832.10
509.8347670.20
509.9307758.10
509.9605083.20
509.9351162.10
509.9383586.20
509.9350955.10
509.9023477.20
509.9351170.10
509.9359775.20
509.9351145.10
509.9392064.20
509.9341948.10
509.9380546.20
509.8309515.10
509.9625661.20
509.8306370.10
509.9306094.20
509.9367009.10
509.9023471.20
Connection
Scale range
-1/0 bar/ " Hg
0/1 bar/psi
0/1.6 bar/psi
0/2.5 bar/psi
0/4 bar/psi
0/6 bar/psi
0/10 bar/psi
0/16 bar/psi
0/25 bar/psi
0/40 bar/psi
0/60 bar/psi
0/100 bar/psi
0/160 bar/psi
0/250 bar/psi
0/400 bar/psi
0/600 bar/psi
Surface
Substitute .11
Page four
Flush (3 hole)
Substitute .22
Direct
Direct
bottom
rear
±1.0% of full scale deflection
3/8" BSP taper
Single scale kPa
500.9683325.10
500.9683357.30
500.9683327.10
500.9683358.30
500.9683328.10
500.9683359.30
500.9683329.10
500.9683360.30
500.9683330.10
500.9683361.30
500.9683331.10
500.9683362.30
500.9683332.10
500.9683363.30
500.9683334.10
500.9683365.30
500.9683336.10
500.9683366.30
500.9683337.10
500.9683367.30
500.9683338.10
500.9683368.30
500.9683339.10
500.9683370.30
500.9683340.10
500.9683371.30
500.9683341.10
500.9683372.30
500.9683342.10
500.9683373.30
500.9683344.10
500.9683374.30
500.9683345.10
500.9683375.30
500.9683346.10
500.9683376.30
500.9683347.10
500.9683378.30
500.9683348.10
500.9683379.30
500.9683349.10
500.9683380.30
500.9683350.10
500.9683381.30
500.9683352.10
500.9683382.30
500.9683353.10
500.9683383.30
500.9683354.10
500.9683384.30
500.9683355.10
500.9683386.30
500.9683356.10
500.9683387.30
Surface
Substitute .11
Flush (3 hole)
Substitute .32
Flush (Clamp)
Flush (Clamp)
Substitute .23
Substitute .33
9197 WIKA 20PP changes_2007
12/2/08
5:10 PM
Page 7
industrial
Type 212.20
G A U G E S
Designed for industrial service, WIKA Type 212.20 gauges feature a
stainless steel case, copper alloy wetted parts and industrial grade Swiss
movement. Available in 100 and 160mm dial sizes, the gauges offer
repeatable accuracy and long service life.
Data sheet PM 02.01
Model
Nominal size
Design
Standard features
Size: 100mm, 160mm
Wetted parts: Copper alloy
Case: Stainless steel
Bezel ring: Stainless steel, bayonet
Window: Instrument glass
Dial: White aluminium
Pointer: Black aluminium
Accuracy: ±1.0% of span (EN 837)
Maximum process
temperature: 60ºC
• Copper alloy wetted parts
• Stainless steel case
• Industrial grade movement
• Other design options are available
Mounting
Connection
Range
-100/0 kPa
-100/60 kPa
-100/150 kPa
-100/300 kPa
-100/500 kPa
-100/900 kPa
-100/1500 kPa
0/60 kPa
0/100 kPa
0/160 kPa
0/250 kPa
0/400 kPa
0/600 kPa
0/800 kPa
0/1000 kPa
0/1600 kPa
0/2500 kPa
0/4000 kPa
0/6000 kPa
0/8000 kPa
0/10x1000 kPa
0/16x1000 kPa
0/25x1000 kPa
0/40x1000 kPa
0/60x1000 kPa
0/80x1000 kPa
0/100x1000 kPa
20/100 kPa
0/100% Linear
212.20
100mm
Direct
bottom
160mm
Direct
rear
Direct
bottom
Direct
rear
3/8" BSP taper
500.9681947.10
500.9681948.10
500.9681949.10
500.9681950.10
500.9681951.10
500.9681953.10
500.9681954.10
500.9681956.10
500.9681957.10
500.9681958.10
500.9681959.10
500.9681961.10
500.9681962.10
500.9681963.10
500.9681964.10
500.9681965.10
500.9681966.10
500.9681967.10
500.9681968.10
500.9681969.10
500.9681970.10
500.9681971.10
500.9681972.10
500.9681973.10
500.9681974.10
500.9681975.10
500.9681976.10
500.9681983.30
500.9681984.30
500.9681985.30
500.9681987.30
500.9681988.30
500.9681989.30
500.9681990.30
500.9681992.30
500.9681993.30
500.9681994.30
500.9682992.30
500.9682993.30
500.9682994.30
500.968299530
500.9682996.30
500.9682895.30
500.9682896.30
500.9682897.30
500.9682898.30
500.9682899.30
500.9682900.30
500.9682901.30
500.9682902.30
500.968290330
500.9682904.30
500.9682905.30
500.9682906.30
501.9683216.10
501.9683217.10
501.9683218.10
501.9683219.10
501.9683220.10
501.9683221.10
501.9683222.10
501.9683224.10
501.9683225.10
501.9683226.10
501.9683227.10
501.9683228.10
501.9683230.10
501.9683231.10
501.9683232.10
501.9683233.10
501.9683234.10
501.9683235.10
501.9683236.10
501.9683238.10
501.9683239.10
501.9683240.10
501.9683241.10
501.9683242.10
501.9683243.10
501.9683244.10
501.9683246.10
501.9683052.30
501.9683053.30
501.9683054.30
501.9683055.30
501.9683056.30
501.9683057.30
501.9683058.30
501.9683061.30
501.9683062.30
501.9683063.30
501.9683064.30
501.9683065.30
501.9683066.30
501.9683068.30
501.9683069.30
501.9683070.30
501.9683071.30
501.9683072.30
501.9683073.30
501.9683074.30
501.9683076.30
501.9683077.30
501.9683078.30
501.9683079.30
501.9683080.30
501.9683081.30
501.9683082.30
500.9681955.10
500.9681991.30
501.9683223.10
501.9683060.30
Surface
Substitute .11
Page five
Flush (3 hole)
Substitute .32
Surface
Substitute .11
Flush (3 hole)
Substitute .32
Flush (Clamp)
Flush (Clamp)
Substitute .33
Substitute .33
9197 WIKA 20PP changes_2007
12/2/08
5:10 PM
Page 8
Type 232.50 Dry case / 233.50 Liquid filled
WIKA Type 232.50 gauges feature 316 stainless steel wetted parts, a 304 stainless steel
case and bayonet ring, a laminated safety glass window and can be liquid filled in the field.
The stainless steel wetted parts and case construction ensure long service life in harsh,
demanding applications. WIKA stainless steel gauges are ideal for process, chemical and
petrochemical applications; oil exploration and production; power generation; pollution
control equipment; and, any other application that requires quality, long-lasting pressure
measurement instrumentation.
Data sheet PM 02.02
Model
Nominal size
Design
232.50 and 233.50
100mm
160mm
Standard features
Mounting
Size: 63mm, 100mm, 160mm
Connection
Range
-100/0 kPa
Case: 304 stainless steel with
-100/60 kPa
blow-out disc
-100/150 kPa
Bezel ring: 304 stainless steel bayonet -100/300 kPa
-100/500 kPa
Window: Laminated safety glass
-100/900 kPa
-100/1500 kPa
Dial: White aluminium
0/60 kPa
Pointer: Black aluminium
0/100 kPa
0/160 kPa
Accuracy: ±1.0% of span (EN 837)
0/250 kPa
Maximum process temperature:
0/400 kPa
0/600 kPa
100ºC (233.50), 200ºC (232.50)
0/800 kPa
0/1000 kPa
0/1600 kPa
0/2500 kPa
0/4000 kPa
0/6000 kPa
0/8000 kPa
0/10x1000 kPa
0/16x1000 kPa
0/25x1000 kPa
0/40x1000 kPa
All stainless steel construction
0/60x1000 kPa
0/80x1000 kPa
Field liquid fillable
0/100x1000 kPa
±1.0% accuracy
20/100 kPa
0/100% Linear
Direct
bottom
Direct
rear
Direct
bottom
Direct
rear
1/2" NPT
Wetted parts: 316 stainless steel
•
•
•
502.9682496.10
502.9682497.10
502.9682498.10
502.9682499.10
502.9682500.10
502.9682501.10
502.9682502.10
502.9682504.10
502.9682506.10
502.9682507.10
502.9682593.10
502.9682594.10
502.9682595.10
502.9682596.10
502.9682597.10
502.9682598.10
502.9682599.10
502.9682600.10
502.9682601.10
502.9682602.10
502.9682603.10
502.9682604.10
502.9682700.10
502.9682701.10
502.9682702.10
502.9682798.10
502.9682799.10
502.9681996.30
502.9681997.30
502.9681998.30
502.9681999.30
502.9682000.30
502.9682001.30
502.9682096.30
502.9682098.30
502.9682099.30
502.9682100.30
502.9682101.30
502.9682102.30
502.9682103.30
502.9682104.30
502.9682105.30
502.9682106.30
502.9682107.30
502.9682108.30
502.9682186.30
502.9682187.30
502.9682188.30
502.9682189.30
502.9682190.30
502.9682191.30
502.9682192.30
502.9682193.30
502.9682194.30
503.9682198.10
503.9682199.10
503.9682200.10
503.9682201.10
503.9682202.10
503.9682203.10
503.9682204.10
503.9682289.10
503.9682291.10
503.9682292.10
503.9682293.10
503.9682294.10
503.9682295.10
503.9682296.10
503.9682297.10
503.9682298.10
503.9682299.10
503.9682300.10
503.9682301.10
503.9682302.10
503.9682303.10
503.9682313.10
503.9682314.10
503.9682315.10
503.9682316.10
503.9682317.10
503.9682318.10
503.9683011.30
503.9683012.30
503.9683013.30
503.9683014.30
503.9683015.30
503.9683017.30
503.9683018.30
503.9683020.30
503.9683021.30
503.9683022.30
503.9683023.30
503.9683024.30
503.9683026.30
503.9683027.30
503.9683028.30
503.9683029.30
503.9683030.30
503.9683031.30
503.9683032.30
503.9683034.30
503.9683035.30
503.9683036.30
503.9683037.30
503.9683038.30
503.9683039.30
503.9683040.30
503.9683042.30
502.9682503.10
502.9682097.30
503.9682205.10
503.9683019.30
• Other design options are available
Surface
Substitute .11
Flush (3 hole)
Substitute .32
Flush (Clamp)
Substitute .33
Liquid filled substitute 505
Page six
Surface
Substitute .11
Flush (3 hole)
Substitute .32
Flush (Clamp)
Substitute .33
Liquid filled substitute 506
9197 WIKA 20PP changes_2007
12/2/08
5:10 PM
Page 9
other WIKA stainless steel gauges, but also feature a solid-front / blowout back safety case.
WIKA stainless steel gauges are ideal for process, chemical and
petrochemical applications; oil exploration and production; power
generation; pollution control equipment; and any other application that
requires quality, long-lasting pressure measurement instrumentation.
Data sheet PM 02.04
Model
Nominal size
Design
Standard features
Case: 304 stainless steel (63 mm);
316 stainless steel (100 mm); both with
blow-out back
Bezel ring: 304 stainless steel bayonet (63 mm)
316 stainless steel bayonet (100 mm)
Window: Laminated safety glass
Dial: White aluminium
Pointer: Black aluminium
Accuracy: ±1.6% of span 63mm,
±1.0% of span 100mm (EN 837)
Maximum process temperature:
100ºC (233.30), 200ºC (232.30)
• All stainless steel construction
• Field liquid fillable
• Solid-front safety case design
• Other design options are available
100mm
Mounting
Direct
bottom
Direct
bottom
Connection
1/4 " NPT
1/2 " NPT
530.7977353.10
530.7977361.10
530.7977370.10
530.7977388.10
530.7977396.10
530.7977400.10
530.7977418.10
530.9688656.10
530.9685942.10
530.7170646.10
530.7062231.10
530.7198991.10
530.7731095.10
530.8379254.10
530.7731079.10
530.7731087.10
530.9688657.10
530.7977426.10
530.7977434.10
530.7977442.10
530.7977451.10
530.8656568.10
530.7977469.10
530.7977477.10
530.7977485.10
530.7977493.10
530.7051752.10
530.7977612.10
530.7977621.10
530.7051787.10
530.9166452.10
530.7977639.10
530.7977647.10
530.7977655.10
530.7683231.10
530.7977663.10
530.7683249.10
530.7051817.10
530.7683266.10
530.7386380.10
530.7683274.10
530.7683290.10
530.7051850.10
530.7245943.10
530.7683312.10
530.7051922.10
530.7051931.10
530.7051949.10
530.7051957.10
530.7223588.10
530.7977671.10
530.7977681.10
530.7977699.10
530.7977507.10
530.7977701.10
Size: 63mm, 100mm
Wetted parts: 316 stainless steel
232.30 and 233.30
63mm
Range
-100/0 kPa
-100/60 kPa
-100/150 kPa
-100/300 kPa
-100/500 kPa
-100/900 kPa
-100/1500 kPa
0/60 kPa
0/100 kPa
0/160 kPa
0/250 kPa
0/400 kPa
0/600 kPa
0/800 kPa
0/1000 kPa
0/1600 kPa
0/2500 kPa
0/4000 kPa
0/6000 kPa
0/8000 kPa
0/10x1000 kPa
0/16x1000 kPa
0/25x1000 kPa
0/40x1000 kPa
0/60x1000 kPa
0/80x1000 kPa
0/100x1000 kPa
20/100 kPa
0/100% Linear
Surface
Substitute .11
Liquid filled substitute 505
Page seven
G A U G E S
WIKA Type 232.30 stainless steel gauges offer the same advantages as
process
Type 232.30 Dry case / 233.30 Liquid filled
9197 WIKA 20PP changes_2007
12/2/08
5:10 PM
Page 10
Differential pressure gauges
WIKA offers a wide range of differential pressure gauges suitable for demanding applications in the HVAC and process markets. These gauges
feature differential measuring ranges from 0.25 kPa, static pressures up to 40,000 kPa and wetted parts materials that range from copper to
stainless steel.
Indicator
Indicator and Switch
Data sheet PM 07.15
DELTA-plus
Model 702.01.100
Switch
Indicator and Transmitter
Data sheet PM 07.17
Data sheet PM 07.16
DELTA-comb
Model 702.02.100
Data sheet PM 07.18
DELTA-switch
Model 851.02.100
DELTA-trans
Model 891.34.2189
Main applications
• Potable and service water
treatment plants
• Heating, ventilation and
air-conditioning
• Dedusting equipment
• Technical building
equipment
• Pump monitoring and control
• Filter plants
WIKA has extended its wide variety of differential pressure gauges
by developing a new range of DELTA products - DELTA-plus,
DELTA-comb, DELTA-switch and DELTA-trans.
Each instrument features innovative design and an easy-to-read
differential pressure display. The rigid and compact design makes
the gauges ideal for tough industrial operating environments. The
four gauges have identical exteriors and geometrical features and
use the same diaphragm compression spring measuring system.
Specifications
• Solid case construction
• Differential measuring
ranges: 0…25 kPa to
0…2,500 kPa
• Static pressure: 2,500 kPa
• Overload: 2,500 kPa (either side)
• Integrated static pressure
indicator: DELTA-plus and
DELTA-comb
Data sheet PM 07.14
These models are suitable for monitoring differential
pressures in filter plants, pipelines systems, valves and
pumps in the gas, water and air supply markets.
Up to two alarm contacts can be added to either model.
Model 700.01
Data sheet PM 07.13
Model 700.02
Model 732.14
Model 732.51
Nominal sizes: 100 and 160mm
Housing: Stainless steel with
laminated safety glass window
Wetted parts: Stainless steel
Accuracy: ±1.6% of span
(EN 837)
Weather protection: IP 54
Ranges: 0…6 kPa to 0…4,000
kPa (static pressures up to
40,000 kPa)
Nominal sizes: 100 and 160mm
Housing: Stainless steel, with
blow-out disc and laminated
safety glass window
Wetted parts: Stainless steel
Accuracy: ±1.6% of span (EN 837)
Weather protection: IP 54
Ranges: 0…1.6 kPa to 0…2,500
kPa (static pressures up to
4,000 kPa)
Data sheet PM 07.05
Page eight
9197 WIKA 20PP changes_2007
12/2/08
5:10 PM
Page 11
Data sheet PM 02.10
Moulded case solid-front safety design
Type 232.34 (Dry case)
233.34 (Liquid filled)
Oxygen gauges solid-front safety case design
Specifically designed and manufactured in accordance with strict standards, WIKA oxygen and gas
pattern gauges offer repeatable accuracy and long service life. The gauges are manufactured and
maintained in a degreased state to ensure that no oil comes in contact with the connection or internals
of the gauge. The gauge socket is fitted with a restrictor to limit the rate of pressurisation.
G A U G E S
Specifically designed for the chemical and petroleum processing industries, WIKA process gauges
have the construction, materials and engineering required for even the toughest of conditions.
These gauges are engineered to deliver years of accurate service and will withstand vibration,
corrosive media and environments and a wide range of temperatures.
• Solid-front / blow-out back
• Field liquid fillable
• Adjustable pointer
• 4 1/2" and 6"
speciality
Special application gauges
Size: 100mm and 160mm
Case: 304 stainless steel with integral solid-front safety baffle
Bezel: 304 stainless steel bayonet
Wetted parts: In accordance with specification including Monel or 316 stainless steel
Window: Safety glass
Dial: White aluminium
Pointer: Black aluminium
Accuracy: ±1.0% of span (AS 1349-1986)
Capsule gauges are extremely sensitive and highly accurate. The capsules are designed to measure pressure and vacuum of gaseous
media from as low as 0.25 kPa. An adjustment screw is located on the dial to re-zero the pointer if necessary.
Model 611.10 and 612.20
Nominal sizes: Model 611.10: 63mm, Model 612.20:
100 and 160mm
Case: Model 611.10: Black steel with snap fit window
Model 612.20: Stainless steel with glass window
and bayonet bezel
Wetted parts: Copper alloy
Accuracy: ±1.6% of span (EN 837)
Ranges: 0…2.5 kPa to 0…60 kPa
(Model 611.10 and Model 612.20 Ø100mm)
0…0.6 kPa to 0…60 kPa
(Model 612.20 Ø160mm)
Zero adjustment: Externally through window
Model 632.50
Nominal sizes: 100 and 160mm
Housing: Stainless steel with safety glass window
and bayonet bezel
Wetted parts: Stainless steel
Accuracy: ±1.6% of span (EN 837)
Ranges: 0…1.6 kPa to 0…60 kPa (Ø100mm)
0…0.25 kPa to 0…60 kPa (Ø160mm)
Zero adjustment: Externally through window
Data sheet PM 06.01/.02/.03
Diaphragm gauges (Schäffer type) are ideal for applications that involve viscous and crystalising media in harsh environments such as pulp and
paper processing, chemical, petrochemical, and in water and sewerage treatment plants. Over pressure protection is a standard feature of these
diaphragm gauges. The level of over pressure protection varies from 3, 5 or 10 times indicated full-scale value.
Model 422.12
Nominal sizes: 100 and 160mm
Housing: Cast iron
Diaphragm: Stainless steel
Process housing: Black carbon steel
Accuracy: ±1.6% of span (EN 837)
Ranges: Flange Ø160mm 0…1.6 kPa to 0…25 kPa
Flange Ø100mm 0…40 kPa to 0…4,000 kPa
Process connection: All standard thread or
flange sizes are available
Liquid filling (if required): Glycerine (Model 423.12)
Data sheet PM 04.02
Data sheet PM 04.03
Page nine
Model 432.50
Nominal sizes: 100 and 160mm
Housing: Stainless steel with rear blow-out disc
Wetted parts: Stainless steel, other options available,
(PTFE, Hastelloy, etc.)
Accuracy: ±1.6% of span (EN 837)
Ranges: Flange Ø160mm 0…1.6 kPa to 0…25 kPa
Flange Ø100mm 0…40 kPa to 0…4,000 kPa
Process connection: All standard thread or flange sizes
are available
Liquid filling (if required): Glycerine (Model 433.50)
Other versions available on application
9197 WIKA 20PP changes_2007
12/2/08
5:10 PM
Page 12
Diaphragm seals
The WIKA diaphragm seal system enables pressure gauges, pressure switches, pressure
transducers and transmitters of varying designs to be adapted for the most adverse
applications. The diaphragm seal is intended to separate the pressure instrument from the
pressure medium, whilst allowing pressure variations to be precisely sensed by the instrument.
Data sheet CS 99.03
The pressure applied on the diaphragm seal is transmitted to the pressure-sensing element by
means of a suitable liquid. The seal body and diaphragm are generally made of stainless steel.
Model 990.40/41 Low Pressure
A wide selection of special materials is also available to handle almost any exotic process fluid.
Diaphragm Seal
WIKA diaphragm seals are also ideal for hygienic applications such as in the food industry. The
seals are available in several designs and materials to ensure complete compatibility with the
Intended service: Low range
pressure gauges, differential pressure
gauges or transmitters
process application.
Wetted parts: 316 stainless steel
Pressure rating: 4,000 kPa
Connection: Thread or flange
Data sheet DS 99.01
Data sheet DS 99.03
Data sheet DS 99.04
Model 990.10/12 Standard Series
Model 990.34 Welded Body
Model 990.36 High Pressure Flush
Diaphragm Seal
Diaphragm Seal
Diaphragm Seal
Intended service: General process
Intended service: General process
Intended service: High pressure or
Wetted parts: 316 stainless steel or
Wetted parts: 316 stainless steel
applications where the diaphragm
Monel, PTFE, Hastelloy C276, Tantalum
Pressure rating: 10,000…100,000 kPa
must be close to the process
Pressure rating: 25,000 kPa
Connection: 1/2" BSP/NPT male/female
Wetted parts: 316 stainless steel
Connection: Thread or flange
Pressure rating: 60,000 kPa
Connection: 1/2"…2" BSP
Page ten
9197 WIKA 20PP changes_2007
12/2/08
5:10 PM
Page 13
Model 990.21/22 Hygienic
Diaphragm Seal
Intended service: Food, biochemical
and pharmaceutical
Wetted parts: 316L stainless steel
Pressure rating: 4,000 kPa
Connection: 3/4"…3" APV-RJT
(BSM), Triclamp
Data sheet CS 98.03/.05
Model 981.10/27 Inline Flange
Diaphragm Seal
Intended service: Applications where
measuring points without dead space
is required
Wetted parts: 316 stainless steel, or
Monel, Hastelloy C276, Tantalum
Pressure rating: Class 150#…2500# ANSI
Connection: ANSI 1"…6"
Also available with integrated RTD or
thermocouple
Data sheet CS 99.10
Model 990.30 Homogeniser
Diaphragm Seal
Intended service: High pressure gauges
or transmitters
Wetted parts: 316 stainless steel
Pressure rating: 60,000 kPa
Connection: Special flange
Data sheet DS 98.52
Model 981.22 Inline Hygienic
Diaphragm Seal
Intended service: Food, biochemical
and pharmaceutical
Wetted parts: 316L stainless steel
Pressure rating: 4,000 kPa
Connection: 3/4"…4" APV-RJT
(BSM), Triclamp
Also available with integrated RTD or
thermocouple
Data sheet DS 99.28
Data sheet DS 99.27
Model 990.27 Flange
Diaphragm Seal
Intended service: Process industry
Wetted parts: 316 stainless steel, or
Monel, PTFE, PFA, Hastelloy C276,
Tantalum, Titanium, Ceramic
Pressure rating: Class 150#…Class
2500# ANSI
Connection: ANSI 1"…5"
S E A L S
Data sheet DS 99.40/.41
diaphragm
Diaphragm seals
Model 990.28 Cell Type (Sandwich)
Diaphragm Seal
Intended service: Process industry
Wetted parts: 316 stainless steel, or
Monel, PTFE, PFA, Hastelloy C276,
Tantalum, Titanium, Ceramic
Pressure rating: Class 150#…Class
2500# ANSI
Connection: ANSI 2"…5"
Data sheet DS 99.29
Model 981.31 Concrete/Slurry Seals
Seals for concrete/slurry are available in
threaded or inline configurations.
Model 990.29 Extended Nozzle Flange
Diaphragm Seal
Intended service: Lagged pipes or vessels in
the process industry
Wetted parts: 316 stainless steel, or Monel,
PFA, Hastelloy C276, Tantalum, Titanium
Pressure rating: Class 150/300# ANSI
Connection: ANSI 2"…5"
Extension: 50, 100, 150, 200mm
Page eleven
9197 WIKA 20PP changes_2007
12/2/08
5:11 PM
Page 14
Pressure transmitters
WIKA piezoresistive and thin film pressure transmitters
are precision engineered to fit the majority of industrial
Model
S-10
S-11
IS-10
IS-11
Design
Standard
Flush diaphragm
Standard
Flush diaphragm
pressure measurement applications. Each unit undergoes
quality control testing and calibration to achieve high
levels of accuracy and repeatability. State of the art
Ex-version
surface mount technology ensures that the unit is
protected against vibration, shock and humidity. Each
unit is temperature compensated to ensure accuracy
and long-term stability under severe ambient temperature
conditions.
The stainless steel casings offer IP65 ingress protection
as standard, with IP67, IP68 and IP69 as options on
Data sheet
Accuracy (+ % of FSV)
Degree of protection
Power supply
Signal output
Wire system
Electrical connection
some models. Applications for the transmitters cover
water and wastewater, pulp and paper, marine, tank
Pressure connection
level, test equipment and many other process control
operations. Flush diaphragm models are available to
measure highly viscous fluids or media that contains
solids. Ranges from 0…0.1 bar to 0…4,000 bar are
covered across the WIKA range. Models for special
applications, including intrinsically safe and oxygen
service, are also available.
S-10
S-11
S-11 with
cooling element
Scale range
-1/0 bar
-0.6/0 bar
-0.4/0 bar
-0.25/0 bar
0/0.1 bar
0/0.16 bar
0/0.25 bar
0/0.4 bar
0/0.6 bar
0/1 bar
0/1.6 bar
0/2.5 bar
0/4 bar
0/6 bar
0/10 bar
0/16 bar
0/25 bar
0/40 bar
0/60 bar
0/100 bar
0/160 bar
0/250 bar
0/400 bar
0/600 bar
0/1000 bar
Certificate No. ANZEx 04.3007X
Ex. ia. I/IIC T6
PE 81.01
PE 81.22
0.25% (BFSL)
IP65
DC 10...30V
4...20 mA
2-wire
4-pin L-plug per DIN 43 650
1) 1" BSP parallel with
1) 1" BSP parallel with
“O” ring
“O” ring
1/2" BSP parallel
1/2" BSP parallel
2) 1/2" BSP parallel
2) 1/2" BSP parallel
“O” ring
“O” ring
531.9013466
531.9810315
531.9810323
531.9810331
531.9083499
531.9083502
531.9021329
531.9013474
531.9013482
531.9013490
531.9013504
531.9013512
531.9013520
531.9013539
531.9013547
531.9013555
531.9073922
531.9073930
531.9073949
531.9073957
531.9073965
531.9073973
531.9073981
531.9073990
531.9074015
531.9810714
531.9810722
531.9810730
531.9810757
531.9083537
531.9083545
531.9021264
531.9021272
531.9021280
531.9021299
531.9021302
531.9021310
531.9021213
531.9021221
531.9021230
531.9021248
531.9023518
531.9023520
531.9023534
531.9023542
531.9023550
531.9023569
531.9023577
531.9023585
-
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
531.8372826
531.8372836
531.8372846
531.8372856
531.8372866
531.8372876
531.8372886
531.8372906
531.8372916
531.8372936
531.8372946
531.8372956
531.8372966
531.8372976
531.8372986
531.8372996
531.8373186
531.8373196
531.8373206
531.8373216
531.8373226
531.8373236
531.8373246
531.8373276
531.8373286
531.8373006
531.8373016
531.8373026
531.8373036
531.8373046
531.8373056
531.8373066
531.8373076
531.8373096
531.8373106
531.8373126
531.8373136
531.8373146
531.8373156
531.8373166
531.8373176
531.8373296
531.8373306
531.8373316
531.8373326
531.8373336
531.8373346
531.8373356
531.8373366
-
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
2)
Model UT-11 (flush diaphragm) and UniTrans Model UT-10 (1/2" NPT male)
Data sheet PE 86.01/.02
The UniTrans pressure transmitter is designed for a variety of pressure measurement
applications. Its 20:1 turndown capability provides flexibility when wide changes in
measuring ranges are encountered. It is also available with PROFIBUS PA and HART®
Protocol.
• 0.15% accuracy
• User adjustable turndown of up to 20:1
• All stainless steel wetted parts
• 4-20mA 2-wire output signal
• Large, easy-to-read LCD includes bar graph and trend display is optional
Page twelve
9197 WIKA 20PP changes_2007
12/2/08
5:11 PM
Page 15
Data sheet PE 81.19
Data sheet PE 81.32
Precision Model P-10/P-11
WIKA precision transmitters are designed for
monitoring, testing and calibration applications
where accuracies of ≤0.1% of span are required.
The microprocessor based transmitter provides
excellent linearity and repeatability. Available
outputs include 0-20 mA 3-wire, 4-20 mA
2-wire, 0-5 V and 0-10 V 3-wire, RS-232 and
RS-422 for digital output to a computer.
Fieldcase Model F-20/F-21
These transmitters are designed for extremely harsh
industrial pressure measurement applications. The
compact design features an integral IP 67 junction box
and protection against electromagnetic interference. The
304 stainless steel case and 316 stainless steel wetted
parts make it particularly suited to outdoor applications in
offshore, chemical and petroleum refineries where reliable
pressure measurement is critical.
Data sheet PE 81.14/.18
Data sheet PE 81.09/.23
Submersible Model LS-10/LH-10
WIKA submersible liquid level transmitters are
engineered for a wide variety of industrial and
municipal liquid level applications. The compact,
rugged, submersible pressure transmitters’
applications include water and wastewater
treatment, well depth measurement and
offshore water depth measurement. Cable
lengths up to 300 metres and lightning
protection are just two of the options available
for this model.
Data sheet PE 81.60
The Next Generation A-10
With a stainless steel case and compact
design, WIKA OEM pressure transmitters
are specifically designed to meet price and
performance requirements of Original
Equipment Manufacturers (OEM). OEM
applications include hydraulics, HVAC
compressor control, machine tools and
robotics. They are also available in a
miniature design model, M-10.
tronic line
Pressure transmitters
ECO Tronic Model ECO-1
ECO Tronic pressure transmitters and transducers
combine performance, reliability and value for a wide
variety of electronic pressure measurement applications.
They are available in ranges from 0…1 bar to 0…1,000
bar. The transmitter version provides 4-20 mA 2-wire
signal output. The transducer version supplies a 0-10
VDC 3-wire output signal. Both signals are fully
conditioned and provide an output that is both linear
and proportional to the applied pressure.
Data sheet PE 81.21
Mobile Hydraulics Model MH-1
Its extremely high resistance to shock, vibration and
pressure peaks, combined with degrees of protection of
better than IP 68, make this instrument particularly suitable
for the rough operating conditions of mobile hydraulics.
Pressure ranges from 0…60 bar to 0…600 bar are
available to meet all standard mobile hydraulic applications.
The sensor is recessed into the pressure connection,
offering additional protection against oil loss should the
sensor be destroyed.
Data sheet AC 80.01/.02/.03/.04/.05
Attachable Indicator Model A-AI-1
The loop powered attachable indicator
is designed for use with the 4-pin ‘L’
plug supplied with Tronic Line transmitters.
The indicator is user programmable for
a display range of -1,999 to +9,999.
The 10mm LCD display can be tilted for
improved viewing. The indicator meets
IP 65 weather protection and has an
excellent price performance ratio.
optional
Data sheet AC 80.07
Digital Panel Meters
WIKA programmable process
meters are ideal for use with Tronic
Line pressure transmitters when a
programmable display or controller is required. The indicators are
user programmable with universal input 4-20 mA, 0-20 mA, 0-5 V
0-10 V, and DI-35-D features Dual inputs with four basic arithmetic
operations (+ - x /).
Model
Accuracy
Display
DI-15
0.5± 1-digit
LED 4-digit
Nominal size
48
X
24mm
A-RB-1
0.05± 2-digit
LED 31/2-digit
96
X
48mm
DI-35
0.05± 1-digit
LED 5-digit
96
X
48mm
Output signal and interface include 4-20 mA, 0-20 mA, 0-10 V,
0-5 V, RS-232 and RS-485. Features include minimum and
maximum memory, adjustable alarm contacts and hysteresis and
in-built transmitter power supply.
Page thirteen
9197 WIKA 20PP changes_2007
12/2/08
5:11 PM
Page 16
Test and calibration equipment
DH-Budenberg Deadweight Primary
DH-Budenberg Reference &
DH- Budenberg Portable Calibrators
Standards & Differential Deadweight
Precision Calibration, Including:
& Comparators:
Testers:
Pneumatic Reference Standards 5200 series
Model: PPS42 portable calibrator in single or
Models: Pneumatic 551, 552, 554, 556, 558
& Hydraulic 5300 series, with ranges up to
dual range with ranges from vacuum to 70,000
Hydraulic 580L, 580M, 580DX, 580HX,
500MPa.
kPa.
580EHX, 283, 80, 80L.
Differential Pressure Balance 5500 series:
Desktop comparators P542 (pneumatic) &
• Ranges -100 kPa to 400,000 kPa
static pressure to 100 MPa & DP to 95 MPa
H542 (hydraulic) with ranges from vacuum to
• Accuracy 0.008% to 0.015%
Digital Piston Gauges DPG10A (absolute) &
260,000 kPa.
DPG10G (gauge) with ranges from -5 hPa
• Accuracy 0.025%
to 25 MPa.
• Accuracy 0.001% to 0.015%
Mensor Precision Pressure
Mensor Precision Pressure
WIKA Precision Temperature
Calibrator & Controller
Controller CPC6000 series:
Calibrators Dry Block and Liquid Baths
CPC8000 series
Features:
Models:
Features:
• Dual range option with up to 4 sensors
• CTD9100 & CTD9300 dry well calibrators with
• Pressure ranges to 160,000 kPa
• Touch Screen
• Control stability: 0.001% FS
• Pressure ranges:
ranges from -30C to 165ºC & 40ºC to 650ºC
• CTB9210 Calibration Bath, range 40ºC to 250ºC
• Accuracy: 0.004%
0 to 2.5 kPa up to 10,000 kPa
• CTB9220 Calibration Bath, range 40ºC to 250ºC
• Dual range version
• Control stability: up to 0.003% FS
• High Speed controlling & stability
• Accuracy: up to 0.005%
• CTB 9430 Calibration Bath, range -30ºC to
200ºC
• CTB9100 Micro Calibration Baths, ranges
from -30ºC to 165ºC & 40ºC to 225ºC
NATA Accreditation Laboratory 410
Deadweight testers
• Range -100 kPa to 120,000 kPa
• Best uncertainty 0.006%
Gauges, transducers and
transmitters
• Range -100 kPa to 350,000 kPa
• Best uncertainty 0.006%
Liquid in glass and mechanical
thermometers, digital (RTD’s
and thermocouples)
• Range -75ºC to 500ºC
• Best uncertainty 0.01ºC
Page fourteen
9197 WIKA 20PP changes_2007
12/2/08
5:11 PM
Page 17
Data sheet PE 84.20
Data sheet PE 89.09
WIKA CPH6000 Portable
Mensor Portable Pressure
WIKA Hand-Held Pressure
Process Calibrator
Indicator Model 2300 series
& Temperature Indicators
Features:
Features:
The CPH6200 pressure indicator &
• Easy change sensors
• Dual Range Option
logger features ranges from 0-10kPa up
• Powers & reads test items
• Accuracy 0.015%
to 100,000 kPa
• Calibration & Pressure Switch
• Temperature compensation
The CTH6200 temperature indicator &
• Absolute and Gauge versions
logger features a range of -50ºC up to
test function
• RS232 & USB interface
can be in the same instrument
calibration
Portable calibration equipment
250ºC
• Ranges: from 0-25 kPa up to
100,000 kPa
• Accuracy: 0.025%
WIKA Hand Test Pump CPP-30
WIKA Hydraulic Test Pumps
An easy to use pneumatic pressure hand-
WIKA CPP series of Hydraulic Spindle Pumps, with ranges
pump, with extended pressure and vacuum
of: 0-100,000 kPa, 160 MPa, 500 MPa, & 700 MPa
generation from -95 kPa to + 3500 kPa, with
The CPP series have been designed around a solid
large volume fine adjustment to ensure
platform and with the proven technology from the WIKA
precise setting over a wide range.
CPB5000 pressure balance.
Test Gauges
The extremely sensitive and highly accurate. WIKA Type 312.20 Test Gauges are excellent for instrument shops, gauge
repair and calibration shops, testing laboratories and other applications that demand high precision and consistent
results. Type 312.20 Test Gauges feature knife-edge pointers and mirror bands on the dial to ensure precise readings
and to eliminate parallax error. Inside, a low-friction, wear resistant movement made of copper alloy and argentan
delivers a long service life and consistent
levels of accuracy.
Standard features
Size:160mm
Case: 304 stainless steel
Bezel ring: 304 stainless steel bayonet
Wetted parts: Copper alloy
Movement: Copper alloy and argentan
Window: Instrument glass
Dial: White aluminium with mirrored band
Pointer: Black aluminium, knife-edge
Accuracy: ±0.25% of span (AS1349-1986 clause 4.1.1)
NATA certificates can be supplied as an option
Model
Design
Scale range
-100/0 kPa
-100/150 kPa
-100/300 kPa
0/100 kPa
0/160 kPa
0/250 kPa
0/400 kPa
0/600 kPa
0/1000 kPa
0/1600 kPa
0/2500 kPa
0/4000 kPa
0/6000 kPa
0/8000 kPa
0/10x1000 kPa
0/16x1000 kPa
0/25x1000 kPa
0/40x1000 kPa
0/60x1000 kPa
Page fifteen
312.20
Data sheet PM 03.01
519.9153834.11
519.9153835.11
519.9153836.11
519.9153838.11
519.9153839.11
519.9153841.11
519.9153842.11
519.9153843.11
519.9153844.11
519.9153846.11
519.9153847.11
519.7428678.11
519.9153848.11
519.9153849.11
519.9153850.11
519.9153851.11
519.9153852.11
519.7918896.11
519.9153854.11
The range of
Wallace & Tiernan
analogue precision
gauges/portable
pneumatic calibrators
is also available.
9197 WIKA 20PP changes_2007
12/2/08
5:11 PM
Page 18
Pressure switches
Model PS-20/PS-21
Sensing principle: Piezoresistive and thin film element
Pressure ranges: 0…0.25 bar to 0…1,000 bar
Overpressure safety: 2 bar to 1,500 bar
Pressure connection: 1/2" BSP (1/2" NPT option)
Wetted parts: 316 Stainless steel
Cable connection: Hirschmann Plug (L-plug) or fly lead
Adjustment accuracy of switching points:
≤0.5% of scale (BFSL)
Switch points: (max. 2) 0 – 100% of span
Switching hysteresis: 1 – 99% of span
Switch modes: PNP, NPN, PNP-PNP, NPN-NPN,
PNP-NPN, Potential Free
Unlike conventional switches, the electronic pressure switch is extremely accurate, resistant to shock and
vibration and offers unrivalled set point security. The latest technology, combined with the switch’s sturdy and
compact construction, ensures its reliability and long-term stability. Using the Windows-based WIKA Easy
Switch software, the switch is easily programmed to meet the needs of the customer.
Data sheet: PE 81.28
Cella Explosion Proof and Intrinsically Safe Pressure Switches
Type: Pressure and Differential Pressure
Ranges: 0…10 mbar to 0…600 bar
Rating: EEx-d IIC T6, EEx-ia according to CENELEC
Options: Suitable for offshore applications (NACE)
FEMA Mechanical Pressure Switches
•
•
•
•
Proven safety
Solid aluminium die cast housing
1/2" BSP parallel connection
Ex-versions available
Model
DCM
DCM
DCM
DCM
DCM
DCM
DCM
DCM
DCM
DCM
DCM
025
06
1
3
6
625
10
16
25
40
63
Adjustment
range
0.04…0.25 bar
0.1…0.6 bar
0.2…1.6 bar
0.2…2.5 bar
0.5…6 bar
0.5…6 bar
1…10 bar
3…16 bar
4…25 bar
8…40 bar
16…63 bar
Switching
differential
0.03 bar
0.04 bar
0.04 bar
0.1 bar
0.15 bar
0.25 bar
0.3 bar
0.5 bar
1.0 bar
1.3 bar
2.0 bar
Maximum
pressure
6 bar
6 bar
6 bar
16 bar
16 bar
25 bar
25 bar
25 bar
60 bar
60 bar
130 bar
Wetted
parts
Copper alloy
Copper alloy
Copper alloy
1.4104 stainless
1.4104 stainless
1.4104 stainless
1.4104 stainless
1.4104 stainless
1.4104 stainless
1.4104 stainless
1.4104 stainless
FEMA Mechanical Pressure Switches are potential free switches, with adjustable
microswitches that have switching capacity of 10A at 250VAC.
Page sixteen
steel
steel
steel
steel
steel
steel
steel
steel
9197 WIKA 20PP changes_2007
12/2/08
5:11 PM
Page 19
Indicating Pressure Switches
Indicating Pressure Switches combine local pressure indication with alarm and
control capabilities into a single, economical and compact system. The WIKA
Indicating Pressure Switches are extremely reliable and have low hysteresis and
easy set point adjustment. They are ideally suited for alarm and control functions
on hydraulic, pneumatic and general industrial machinery and equipment as well
as process industry installations. They are available in dry and liquid filled
configurations.
Alarm contact types:
• Single, double and triple
• Front mounting magnetic contacts (Model 820)
accessories
Options and accessories
• Built in magnetic contacts (Model 821)
• Built in inductive contacts (Model 831)
Contact setting: Contacts are set by means of a key from the front window
Contact actuation: The contacts are actuated when the instrument pointer
sweeps the contact indicator from either side
Square and rectangular cased
Accessories for pressure gauges
gauges for panel mounting
• Restrictor screws
• Drag or indicating pointers
Model 214.11 (Bourdon Tube) and
• Special and customised dials
• Adjustable pointer
614.11 (Capsule)
• Instrument tags
Nominal size: 48 x 24, 72 x 36, 72 x 72,
• Certificates of compliance
144 x 72, 96 x 96, 144 x 144mm
• NATA certification
Housing: Galvanized steel
• Thread adaptors in brass and stainless steel
Wetted parts: Copper alloy
• Pigtail and U-tube steam trap syphons in mild steel and
Accuracy: ±1.0/1.6% of full scale
Ranges: 0…0.25 kPa to 0…100,000 kPa
stainless steel
• Shut off cocks in brass up to 2,500 kPa
• Shut off needle valves in mild steel and stainless steel up
Data sheet: PM 02.07/.08
PM 06.05
to 60,000 kPa
• Sealing washers in copper, steel, PTFE, stainless steel
and aluminium
Bottle and can testers
(Carbonation testers)
• Overpressure limiting valves in brass and stainless steel
• Wall mounting brackets
Intended service: To test the CO2 content of
• Pipe connectors
soft drinks in plastic bottles, aluminium cans or
• Pipe weld-in nipples
soft drink post mix machines.
• Snubbing valves
Pressure sensor: Transmitter S-10
• Pressure equalising valves
Optional temperature sensor: Pt100 RTD
• Cooling elements
• Rubber gauge protecting covers
Display: Digital panel meters in field casing
• Sinter filters
• T-pieces
Page seventeen
9197 WIKA 20PP changes_2007
12/2/08
5:11 PM
Page 20
Pressure Units Cross Reference Chart
psi
atms.
" H2O
mm H2O
cm H2O
oz/in2
Kg/cm2
" Hg
mm Hg
(Torr)
cm Hg
mbar
bar
Pa (Nm2)
kPa
MPa
1
0.0681
27.71
703.8
70.38
16
0.0704
2.036
51.715
5.17
68.95
0.0689
6895
6.895
0.0069
14.7
1
407.2
10,343
1,304.3
235.1
1.033
29.92
760
76
1013
1.013
101,325
101.3
0.1013
0.0361
0.00246
1
25.4
2.54
0.5775
0.00254
0.0735
1.866
0.187
2.488
0.00249
248.8
0.249
0.00025
0.001421 0.000097
0.0394
1
0.1
0.0227
0.0001
0.00289
0.0735
0.00735
0.098
0.000098
9.8
0.0098
0.00001
0.01421
0.000967
0.3937
10
1
0.227
0.001
0.0289
0.735
0.0735
0.198
0.00098
98
0.098
0.0001
0.0625
0.00425
1.732
43.986
4.40
1
0.0044
0.1273
3.232
0.323
4.31
0.00431
431
0.431
0.00043
14.22
0.968
394.1
100,010
1,001
227.6
1
28.96
735.6
73.56
980.7
0.981
98,067
98.07
0.0981
0.4912
0.03342
13.61
345.7
34.57
7.858
0.0345
1
25.4
2.54
33.86
0.0339
3386
3.386
0.00339
0.01934
0.001316
0.536
13.61
1.361
0.310
0.00136
0.0394
1
0.1
1.333
0.001333
133.3
0.1333
0.000133
0.1934
0.01316
5.358
136.1
13.61
3.10
0.0136
0.394
10
1
13.33
0.01333
1333
1.333
0.00133
0.0145
0.000987
0.4012
10.21
1.021
0.2321
0.00102
0.0295
0.75
0.075
1
0.001
100
0.1
0.0001
14.504
0.987
401.9
10,210
1021
232.1
1.02
29.53
750
75
1000
1
100,000
100
0.1
0.000145
0.00001
0.00402
0.102
0.0102
0.00232
0.00001
0.000295
0.0075
0.00075
0.01
0.00001
1
0.001
0.000001
0.14504
0.00987
4.019
102.07
10.207
2.321
0.0102
0.295
7.5
0.75
10
0.01
1,000
1
0.001
145.04
9.869
4019
102,074
10,207
2321
10.2
295.3
7500
750
10,000
10
1,000,000
1,000
1
To use this chart:
1. Find the column with the units you want to convert from.
2. Move down that column until you find the "1"
3. Staying with the same row, move horizontally to the column
with the units you are converting to.
4. Multiply the number in that box by the amount
you are changing from to get the converted value.
Pressure and
Temperature Measurement
Part of your business
WIKA Australia Pty Ltd
ABN 49 004 465 936
U n i t K , 1 0 - 1 6 S o u t h S t re e t
R y d a l m e re N S W 2 1 1 6
Te l 0 2 8 8 4 5 5 2 2 2
Fax 02 9684 4767
Unit 3, 435 Montague Road
We s t E n d Q L D 4 1 0 1
Te l 0 7 3 2 5 5 3 8 8 3
Fax 07 3255 3816
Unit 3, 24 Lakeside Drive
Burwood East VIC 3151
Te l 0 3 8 8 4 7 2 0 0 0
Fax 03 9802 9559
U n i t 4 , 1 5 8 F r a n c i s c o S t re e t
B e l m o n t WA 6 1 0 4
Te l 0 8 9 3 3 3 1 5 0 0
Fax 08 9479 5834
w w w. w i k a . c o m . a u
sales@wika.com.au
S p e c i f i c a t i o n s a n d d i m e n s i o n s g i v e n re p re s e n t t h e s t a t e o f e n g i n e e r i n g a t
the time of printing. Modifications may take place and materials specified
m a y b e re p l a c e d b y o t h e r s w i t h o u t p r i o r n o t i c e
© WIKA 2013