REFERENCES
1. D. D. Majumdar, D. Das
“Digital Computer Memory”
Second Edition, John Wiely and Sons,
Newyork, 1983
2. Thomas C. Bartee
“Digital Computer Fundamentals”
McGraw Hill International Edition^
Computer Science Series
3. Dharma Rajaraman,
V. Rajaraman
“Computer Primer”
Revised
Edition,
Prentice Hall o f India Pvt. Ltd.
New Delhi, 1988
4. Technical Education and
Management
“Computer Basic” Analog Computers
Mathematics and Circuitry
W. Foulsham and Co. Ltd.,
England, 1962
5.
Art Lew
“ C o m p u te r
Science, A mathematical
Introduction”, Prentice Hall
New Delhi, 1985
6. R. Venkataraman
“Pulse Digital Circuits *nd Computer
Fundamentals”,Dhanpat Rai and Sons,
Delhi, 1989
Third Edition, International Student Edition,
1981
8. George Diehr, Terry Baron,
Thomas
“BASIC Programming for the
IBM Personal Computer”
Wiley International Edition
Newyork, 1987
9. Gordan B. Davis,
Thomas R. Hoffmann
“FORTRAN 77, A Structured
Disciplined Style” Third Edition
McGraw Hid International Edition
1988
10. Ram Kumar
“Programming with FORTRAN 77”
Tata McGraw Hill, New Delhi, 1986
l l .M .M . Hasan
“Principles o f COBOL Programming”
Dhanpat Rai and Sons, Delhi, 1984
12. M. Kumar,
T.K. Bandopadhyaya
13. Peter Bishop
“Digest on FORTRAN IV Programming”
Khanna Publishers, Delhi, 1986
“Computer Programming in BASIC”
Khanna Publishers, Delhi, 1988
14. B. J. Holmes
“A Complete text o n ,
BASIC Programming”
ELBS, D P Publications, 1987 Reprint
“Computer Programming in BASIC”
Programming for Micro and
Mini Computers,Tata McGraw Hill
New Delhi, 1983
16. Albert Paul Maivino
“Digital Computer Electronics
An Introduction to Micro Computers”
Tata McGraw Hill,
17. Donald H. Handers
New Delhi, 1983
“Computers Today”
McGrat Hill International Edition, 1988
18. Peter Norton
“Introduction to Computers Glencoe”
Macmillan/McGraw HiU,Newyork, 1995
19. Alan Simpson
“Advanced Techniques in
DBaseHl
Plus”, BPB Publication, First Edition,
New Delhi,
20. Lau Barues
1986
“Introducing DBase III Plus”
Khanna Publishers, First Edition,
Repring, 1988
21. A. K. Jain
“Computer for Biginners”
Khanna Publishers, First Edition,
Delhi, 1987
“Microsoft Basic using m odular
structure” , Second Edition,
S. Chand & Company Pvt. Ltd., 1989
23. N. Kannan
“Creative Computing Using BASIC”
Wiley Eastern Limited, 1990
24. Robert G.
“ BASIC A M odular A pproach
A F irst Course” , Second Approach,
CBS Publisher & Distributers, Delhi,
1986
25. Johan M. Mccormick,
Mario G. Salvadori
“Numerical M ethods in FORTRAN”
Edition Fourth, Prentice Hall o f India
Pvt. Ltd., Delhi
26. M orton H. Lewin
“ Clements of C ”
Khanna Publishers 2-B Nath Market Nai
Sarak, Delhi, First Edition Dec. 1987
27. Charles C. Edwards
“Advanced Techniques in Turbo Pascal”
BPB Publication, First Indian Edition,
1988
28, Aditya P. Mathur
“Introduction to PASCAL”
Tata McGraw Hill Publishing
First Reprint Apr. 1989
“Working with LOTUS 1-2-3
A Comprehensive Manual”
Jaico Publishing House Bombay,
First India Edition, 1988
30. Schaum’s Outline Series
Byrous
“Theory & Problem o f Programming
with
PASCAL”, McGraw Hill
International
31. Brian W. Kemighan
Edition 4th Printing, 1988
“Programming Language”
Prentice Hall o f India Private Ltd.
Second Edition, 1989
32. Seymour C. Hirsch
“BASIC Programming Self Taught”
Prentice Hall o f India Private Ltd.,
Sixth Printing July 1988
33. Curt Townsend
“Mastering DBase III Plus :
A Structured Approach”
PBB Publication Market Delhi,
First Indian Edition, 1987
34. N. Subramanian
“Programming for BASIC”
3 rd Edition, A. H. Wheeler and Co. Delhi,
1987
35. E. Balaguruswamy
“Programming BASIC”
Tata McGraw Hill, 1989
“Computer Programming and
Information System with FORTRAN
BASIC and COBOL Languages”
Dhanpal Rai and Sons, Delhi, 1986
37. Richard Allen King
“The MS DOS Handbook”
Second Edition, BPB Publication,
Delhi, 1986
38. S. N. Motewar,
S. Domkundwar
“Computer Programming in
FORTRAN IV with Introduction to
BASIC”, Dhanpat Rai and Sons,
Delhi, 1991
39. K. D. Sharma
“Programming in FORTRAN IV”
East West Press, New Delhi, 1976
40. S. N. Motewar,
S. Domkundwar
“Data Processing and Computer
Programming”J)hanpat Rai and Sons,
New Delhi, 1992
41. N. Subramanian
“FORTRAN Self Taught”
A. H. Wheeler and Company, Delhi, 1988
42. Alain Liegeois
Robot Technology V ol7.,
Performance and Computer Aided Design,
Kogan Page, London 1984
43. M. K. Roy,
D. Ghosh Dastidar
“COBOL Programming including MS
COBOL Programming and COBOL 85”
Second Edition , Tata McGraw Hill, 1989
44. M. H. Hasan
“Computers Programming for Engineers
Theory and Practice”, Dhanpat Rai and Sons,
Delhi, 1987
45. Arup Kumar Mukherjee,
Pijush Kant Som
46.S. Ramani, N, V.
“Computer Methods of Structures”
Khanna Publishers, Delhi, 1985
“A Text Book on Computer
Kotewara Rao,
Programming with Industrial and
R. Nagarajan
Engineering Applications”
CBS Publishers, Delhi, 1987
47. Richard M. Jones
“Introduction to PASCAL”
CBS Publishers, Delhi, 1984
48. S. N. Motewar,
S DomKundwar
“A Course in Computer Program with
Numerical Techniques, FORTRAN IV
with Introduction to FORTRAN-77”
Dhanpat Rai and Sons, Delhi, 1986
49. V. Rajaraman
“Computer Programming in
FORTRAN-77”, Third Edition,
Prentice Hall oflndia, Delhi, 1991
50. V. R ajaram an,
T. Radhakrishanan
51. V .K . Jain
“An Introduction to Digital Computer
Design", Prentice Hall Inc , 1992.
“BASIC Programming
with
Applications”, Tata McGraw Hill,
Tenth Print, 1990
52. S. K. Gupta
“Linear Programming and Network
Models”, EWP Affiliated East West
Press Pvt. Ltd., New Delhi, 1989
53. V. Rajaraman
“Computer Programming in
FORTRAN-IV”, Second Edition(P.H.I.)
Print Limited, 1984
54. L. Bhirud
“Computer Programming for Science
& Engineering”, Oxford & IBH
Publishing Co., New Delhi, 1986
55. B. I. Holmas
“BASIC Programming”
3rd Edition (GB), 1986
56. R. Raja Gopalan
“Understanding Computer”
Tata McGraw Hill Publishing, 1992
57. Ashok K. Jain
“FORTRAN Programming”
Second Edition (Nemchand), 1992
58. V. Rajaraman
“Analog Computational Simulation”
Prentice Hall o f India, 1984
59. V. Rajaraman
Principles o f Computer Programming”
Second Programming (P.H.I.),
Prentice Hall Inc., 1987
60. G.P.Chhalotra,
C.V. Rama Rao, A C. Rao
“Simulation of Secured and adequate
Performance of Microprocessor and
Minicomputers” , AMSE Review,
AMSE Press, Vol 13, No. 3,1990 ,
pp 19-48.
61. G.P.Chhalotra,
“Simulation of Security Problems for
C.V. Rama Rao, A. C. Rao
Microprocessor and Minicomputers” ,
AMSE Review, AMSE Press,
Vol 13, No. 4,1990 , pp 7-24.
62. G. V. Rao
“Microprocessors and Microcomputers
Systems”, CBS Publishers and
distributors, Delhi, 1984 (Book)
63. A. P. Mathur
“Introduction to Microprocessors”
Tata McGraw Hill Company Limited
New Delhi, 1984 (Book)
64. G.P. Chhalotra,
“Simulation o f Security and Adequacy
M. BalaKrishna,
Attributes if High Phase Power System
A. C. Rao
under various single and sequential faults
using modal Network”,The Journal of
the Institute o f Engineers (India),
Vol. 71, August, 1990, pp 116-120
65. P. N. Rao, N. K. Tiwari
and T. K. Kundra
“Computer Aided Manufacturing”
Tata McGraw Hill Publishing Company,
New D elhi, 1993
66. M. P. Groover,
E. W. Zimmers,Jr
“CAD / CAM : Computer Aided Design
and Computer Aided Manufacturing”
Prentice Hall, New Jersy, 1984
67. W. A. Smith (ed)
“A Guide to CAD/CAM”
Revised Edition, The Institution of
Production Engineers, London, 1985
68. D. J. Bowman
“The CAD/CAM Primer”
Howard W Sams, Indiana, 1984
69. E. Teicholz
“CAD/CAM Handbook”
McGraw HiU Book Company, Newyork,
1985
70. T. T. Kukiinski
“A Control Digitizer Tablets”
Computer Graphic World, Vol. 8, No. 5,
May 1985, pp 45-52
71. E. J. Preston,
“CAD/CAM Systems Justification,
G. W. C raw ford,
Implementation,Productivity
M. E. Coticchia
Measurement”, Marcel Dekker, Newyork,
1984
72. Androw J. De B a e t,
Kathleen M. Wheeler
“Midrange
PA-RJSC
Workstations
with Price Performance Leadership”
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992, pp 6-11
73. Craig A. Gleason,
“VLSI Circuits for Law and Midrange
Leith Jo h n so n ,Steven
PA-RISC Computers”,
T. Mangelsdorf, Thomas
Hewlett Packard Journal, Vol. 43, No. 4,
O. Meyoer and
August 1992, pp 12-22
Mark A. Forsyth
74. Frank J. Lettany
“ECL Clocks for High Performance
RISC Workstations” ,Hewlett Packard
Journal, Vol. 43, No. 4, August 1992,
pp 23-25
75. Daniel Li, Audrey B.Gore
“HP 9000 Series 700 Input/Output
Subsystems”,Hewlett Packard Journal,
Vol. 43, No. 4,August 1992, pp 26-33
76. Ali M. Ahi, Gregory
“Design Verification o f the HP 9000
D. Burroughs,
Series 700 Pa RISC Workstation”
Adurey Gore,Steve W.
Hewlett Packard Journal, Vol. 43, No. 4,
Lamar, Chi-Yen,R. Lin
August 1992, pp 34-42
and Alan L. Wiemann
77. Arlen L. roesner
John P. Hoppal
“Mechanical Design of the HP 9000
Model 720 and 730 Workstations”
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992,, pp 43-48
78. Spencer M. Ure,
“Meeting Manufacturing Challanges for
Kelvin W. Allen,
PA RISC Worstations”
Anna M. Hargis, Samuel
Hewlett Packard Journal, Vol. 43, No. 4,
Hammel and Paul Roeber
August 1992, pp 49-54
79. Craig R. Frink, Robert J.
“High Performance Designs for the Low
Hammond, John A. Dykstal Cost PA-RISC Deskpot”
and Don C. Soltis Jr
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992, pp 55-63
80. Daniel A. K e arl,
Michael S. Ard
“Low Cost Plain Paper Colour Inkjet
Printing” Hewlett Packard journal,
Vol. 43, No. 4, pp 64-68
81. Craig Maze,
“Ink and Print Cartridge Development
Daniel Loren E. Johnson,
for the HP Desk Jet 500 / Desk Writer C
A. Kearl and
PrinterFamily”, Hewlett Packard
James P. Shields
Journal, Vol. 43, No. 4, August 1992,
pp 77-83
82. Lee S. Mason, Mar C. Huth
“Automated assembly of the HP Desk Jet
500 C/Desk Writer C Colour Print
Cartridge”, Hewlett Packard Journal,
Vol. 43, No. 4, August 1992, pp 77-83
83. Douglas J. Reed ,
Terry M. Lambright
“Adhesive Materials and Equipments
Selection for the Inkjet 500C/Desk writer
C Colour Print Cartridge”,
Hewlett Packard Journal, Vol. 43, No.4,
August 1992, pp 84-86
84. Michael J. Monroe
“Machine Vision in Colour Print
Cartridge Production”
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992, pp 87-92
85. W illiam J. Allen,
“HP Desk Writer C Printer Driver
Toni D. C ourville,
Development”, Hewlett Packard
Steven O. Miller
Journal, Vol. 43, No. 4, August 1992,
pp 93-102
86. Alvina Y. Nishimoto,
“An Interactive User Interface for
W illiam J Gray,
Material Requirements Planning”
Barbara J. Williams
Hewlett Packard Journal, Vol. 43, No. 4,
August 1992, pp 103-110
87. Lawrence A. Des Jardin
“VXI : A standard for test and
Measurement System Architecture*
Hewlett Packard Journal, Vol. 43, No. 2,
April 1992, pp 6-14
88. Steven J. Narciso and
Greygory Athill
“The VXI Bus from An Instrument
Designers Perspective”
Hewlett Packard Journal, Vol. 43, No. 2,
April 1992, pp 15-23
89. Paul B. Worrell
“Design o f Main Frame Firmware in an
Open Architecture Environment”
Hewlett Packard Journal, Vol. 43, No,2,
April 1992, pp 24.28
90. Christopher P. Kelly
“Real Time Multitasking of Instruments
in the VXI Bus Command Modules”,
Hewlett Packard Journal, Vol. 43, No. 2,
April 1992, pp 29-34
91. Lee Atchison
“VXI Bus Programming in C”
Hewlett Packard Journal, Vol. 43, No. 2,
1993, pp 35-40
92 Sam S. Tsai, James B. Durr
“Achieving High Throughput with
Resister based Dense Matrix
Relay Modules’\Hewlett Packard Journal,
Vol. 43, No. 2, April 1992, pp 41-51
93. Calvin L. Erickson
“Mass Interconnected for VXI bus
Systems”, Hewlett Packard journal,
Vol. 43, No. 2, April 1992, pp 52-58
94. David P. Kjosness
“A Manufacturing Oriented Digital
Stimulus/Response Test Instrument”
Hewlett Packard Journal, Vol. 43, No. 2,
April 1992, pp 59-68
95. Kenneth A. Ward
“Digital Test Development Software for a
VXI bus Tester” Hewlett Packard journal,
Vol. 43, No. 2, April 1992, pp 69-74
96. Larry L. Carlson,
“The VXI bus in a Manufacturing Test
Wayne H. Willis
Environment” Hewlett Packard Journal,
Vol. 43, No. 2, April 1992, pp 75-77
97, Dieter Scherer, William
“The Peak Power analyzer, A new
E. Strasser, James D.
Microwave Tool”, Hewlett Packard
Mcvey ,Wayne M. Kelly
Journal, Vol. 43, No. 4, April 1992,
pp 81-89
98. Michael C. Fischer,
“GaAS Technology in Sensor and Base
Michael J. Schossow
Band Design”, Hewlett Packard Journal
and Peter Tong
Vol. 43, No. 2, April 1992, pp 90-94
99. D avid L. Barnard, Henry
B lack,Jam es A. Thalmann
“Automatic Calibration for Easy and
Accurate Power Measurements”
Hewlett Packard Journal,Vol. 43,
No. 2, April 1992, pp 95-100
100. Koichi Yanagawa
“An Advanced 5 Hz to 500 MHz Network
Analyzer with High Speed Accuracy and
DynamicRange”,Hewlett Packard Journal,
Vol. 43, No. 2, April 1992, pp 101-110
101. Michael P. Movre and
Erse N. Gullerud
“A High Performance Measurement
Coprocessor for Personal Computers”
Hewlett Packard Journal, Vol. 43,
N o.2,A pril 1992, pp 110-116
102. Karen Kerschen and
“HP-UX Operating System Kernal
Jeffrey R. Glasson
Support for the HP 900 Series 700
Workstations”,Hewlett Packard Journal,
Vol. 43, No. 3, June 1993, pp 6-10
103. Donald E. Bollinger,
“Providing HP-UX Kernel Functionality
Frank P.Lemmon
on a new PA-RISC Architecture”
and Dawn L. Yamine
Hewlett Packard Journal, Vol. 43,
No. 3, June 1993, pp 11-14
104. Robert C. Hansen
“New Optimization for PA-RISC
Compilers”,Hewlett Packard Journal,
105. Robert A. Gottlieb,
“HP 9000 Series 700 FORTRAN
Daniel J.M angeheimer,
Optimizing preprocessor”
Sue A Meloy
Hewlett Packard Journal, Vol. 43,
and Alan C. Meyer
No. 3, June 1992, pp 24-32
106. Vasta Santhanam
“Register Reassociation in PA-RISC
Compilers”, Hewlett Packard Journal,
Vol. 43, No. 3, June 1992, pp 33-38
107. Sridhar Ramakrishanan
“Software Pipelining in PA-RISC
Compiler”, Hewlett Packard Journal,
Vol. 43, No. 3, June 1992, pp 39-45
108. Carry A. Countant and
M ichelle A. Ruscetta
“Shared Libraries for HP-UX”
Hewlett Packard Journal, Vol. 43, No. 3,
June 1992, pp 46-53
109. Dianac Robert
“Integrating an Electronic Dictionary
into a Natural Language Progessing
System”, Hewlett Packard Journal,
Vol. 43, No. 3, June 1992, pp 54-65
i 10. Dale D. Russell
‘Application of Spatial Frequency
Methods to Evaluation of Printed
Images”, Hewlett Packard Journal,
Vol. 43, No. 3, June 1992, pp 68-75
I I I . Susan S. Spach and
Ronald W. Plley Blank
“Parallel Ray Traced Image Generation”
Hewlett Packard Journal, Vol. 43,
No. 3, June 1992, pp 76-83
112. Zeid Ibrahim
“CAD/CAM Theory and Practice”
McGraw Hill Book Co., Newyork, 1991
113. H.P. Voelcker and
“Geometric Modelling o f Mechanical
A.G. Requicha
Parts and Processes”, IEEE Computer,
Vol. 10, December 1997, pp 48-57
114. E. E. Hartquist
“Public PADL - 2”,IEEE Computer
GR. and Appl., Vol. 3, No. 7,
October 1983, pp 30-31
115. W. H. P. Leslie (ed)
“Numerical Control Users” Handbook,
McGraw Hill Publishing Company Ltd.,
Newyork, 1970
116. T. K. Kundra, P .N .R a o
“Numerical Control and Computer Aided
Manufacturing”, II Reprint Edition,
Tata McGraw Hill Publishing
Company Ltd., New Delhi, 1988
“Numerical Control o f Machine Tools”
E L B S , London, 1970
] 18. R. S. Pressman and
J. E. Williams
“Numerical Control and Computer Aided
Manufacturing”, John Wiley, Newyork,
1977
119. G.P. ChhaJotra,
“Digital Computer Simulation of
A. N. Gavai, P. L. Juneja Chemical and Electrical Properties of
Mango, Eucalyptus and Ashok leaves
with R L C Measurements” ,
The Journal o f the Institution of Engineers
(India), Vol. 67, Pt El - 3, December, 1986
120. G.P. Chhalotra,
“Digital Computer Simulation of
A. N G a v ai, P. L. Juneja Chemical and Electrical Properties of
Green Leaves with Resistance
Measurements”, AMSE (France)
MS CB - Vol. 8, No. 4, 1987, pp 11-35
121. G. P. Chhalotra etal
“Digital Simulation o f Faults”
Fourth National Power System Conference
BHU, February 15-17,1986
122. G. P. Chhalotra etal
“Digital Simulation o f Complicated
Sequential Faults in three phase power
systems”, International Conference on
Modelling and Simulation, Gorakhpur,
December 17-19, 1985, AMSE France
123. G.P. Chhalotra etal
“Digital Computer Simulation of
Chemical and Electrical Properties of
Gulmohar, Kosham Sweet emly and
Kanak Champa Green Leaves with
RLC”, AMSE France, MSC - A,
Vol. 15, No. 4, 1988, p p l-2 6
124. G. P. Chhalotra,
“Digital Computer o f Unsummetric
B. K. Bhhat and
Unbalances of three phase power
M. P. Chourasia
networks using new frame sequence
components”, The Journal of The
Institution o f Engineers (India), Vol. 57,
pt E l -6 , June, 1977, pp 247-57
125. G. P. Chhalotra,
B. K. Bhat
“Digital Simulation of Complicated
Sequentially developed Simultaneous
Faults on three Phase Power Networks”
The Journal o f The Institution of
Engineers (India), Vol. 6 1 ,P tE l-6 ,
June 1981, pp 1-9
126. G. P. chhalotra
“A New Mathematical Analysis of Series
and Shunt Faults on three phase Power
Notworks” (Computer Simulation), The
Journal o f the Frankline Institute
Philadelphia (USA), vol. 302, No. 1 , July,
1976, pp 85-103
127. G. P. Chhalotra,
S. C. Tiwari
“A New Component Method for Fault
Analysis in Three Phase Power
Networks”,(Computer Simulation),
International Journal o f Electrical
EngineermgEducation, 23,
pp53-63, Manchester, U.P., 1986,
Printed in Great Britain
128. B. Porter and Bradshaw
“Design of Dead Beat Controllers and
Full Order Observers for Linear
Multivariate Discrete Time Plant”,
International Journal of Control,
Vol. 22, No. 2, 1975, pp 149-155
129. B. Gopinath
“Bell System Technical Journal” ,
1971,50, 1063
130. Ichikawa
“A Design of Discrete Time Dead Beat
Reduce Order State Observer”,
International Journal o f Control, 28, 731,
1978
“A Classification o f Linear Controllable
System”, Kybemetica, 1970, 3, pp 173-187
“Canonical Form for the Identification of
Linear Multivariate Systems”, IEEE,
Transactions, Automatic Control, AC-19,
1974, pp 646-656
133. G. D. Forney
‘‘Minimal Bases o f Rational Vector
Spaces with Application to Multivariate
Linear systems”, SIAMJ, 1975, Control,
13, pp 439-520
134. D. G. Luenberger
“Canonical Forms for Linear
Multivariate Systems”, IEEE,Transaction,
Automatic Control, Ac-12,1967,pp 290-293
135. K. Kimura
“Dead Beat Function Observers for
Discrete Time Linear Systems”, SIMJ,
1978, Control, 16, pp 880-894
136. S. I. Ashon
“Microprocessor” with Application in
Process C ontrol” (Book), Tata McGraw
Hill 1990, pp 219. Dead Beat algorithm
and z-transform based algorithm pp 218
137. Kunihika Ichikava
“Discrete Time Fast Regulator with Fast
Observer”, International Journal o f Control,
Vol. 28, No. 5, 1978, pp 733-742
“Microcomputers in Material
Management” ,Wiley Eastern Ltd.,
New Delhi, 1991
139. M. M. Fammy, A. A.
R. Hanafy, M. F. Sakr
“On the Discrete Time Optimal Regulator
Contol Prolem”, Information and Contol,
44, 1980, pp 223-235
140. G. P. chhalotra,
“Reliability Attributes o f Project
G. M. Khan K.K. Soni,
Management Under Dynamic Economic
V. Seema Chouhan,
System”, Proceeding o f National Seminar,
R. Ekbote
Palakkad, Kerala, December 13-14, 1995
141. Tara Chand
“Engineering Economics”
University o f Roorkee, S. Chand and
Company, 1996
142. G. P. Chhalotra
“Electrical Engineering Economics”
(Book) Khanna Publishers, Delhi, 1997
143. D. K. Cheng
“Analysis of Linear Systems” (Book)
Addition Wesley, Inc, Tokey, 1963
144. G. P. Chhalotra
“Reliability in Engineering and
Applications”
(Book),
Khanna Publishers, Delhi, 1986
“Linear Control Systems”(Book)
McGraw Hill, Delhi, 1984
146. E. Bala Guruswamy,
B. Sushiia
“Indian Computing Congress Series :
Computer Systems and Applications”,
Proceedings o f The Indian Computing
Congress held at Hyderabad,
November 22-24, 1990,
Tata McGraw Hill, New Delhi, 1990
147. R. Billinton
“Reliability of Power Systems Analysis”
McGraw Hill Book Company, 1986
148. A. K. Govil
“Reliability” (Book)
Prentice hall o f India, 1986
149. Kedar S. Agarwal,
A.K. Verma
“Software Reliability”
Interdesciplinaiy Programme in
Reliability Engineering, 1.1. T., Bombay,
1993
150, G. M. Khan etal
“Reliability
Management
attributes of Project
Under
Dynamic
Economic System”, Proceedings o f
National seminar on Project Management,
The Institution o f Engineers (India) and
ISTE, December 23-24, 1995.
151. G. M. Khan ,
G. P. Chhalotra
“Electronic Properties of Alloys under
High Pressure and study of Mass law
o f Mixing”, Poster Presentation,
National Conference on High Pressure
Science & Technology, Guru Ghasidas
University, Bilaspur, December, 9-U , 1995
152. G. M. Khan etal.
“Effects of Air Pollution on Phytoelectric
Parameters of Green Leaves and Various
Damages”, System Society o f India,
National systems conference, PSG College
o f Technology, Coimbator,December 14-16,
1995, proceeding
153. G. M. Khan etal.
“Study of Solid, Liquid and Gases
Pollutants Their Mixtures and Effects on
the Quality of the Air” ,Third International
Conference on Environmental Planning and
Management, February 24-26, 1996, VRCE,
Nagpur
154. G. M. Khan etal.
“Planning and Management of
Environmental Vectors through the dead
beat controllers and observers of
Pollution
State Variable” ,
Proceedings o f Third International
conference, VRCE, Nagpur,
Fabruaiy 24-26,1996, pp 470-473
“Probability o f Failures and Reliability of
Power Systems Materials under Pollution
H azards” f System Society o f India,
National System Conference, PSG
College o f Technology, Coimbatore,
December 14-16, 1995, Poster Presentation
156. G. M. Khan,
G. P. Chhalotra
“Reliability Attributes o f Project
Management and Administration under
Dynamic Economic System”,
The Institution o f Engineers (India),
National Convention of Electrical
Engineers, Memo No. PLL/1470,
dt 30-10-96. Accepted for Presentation
157. G. M. Khan,
G. P. Chhalotra
“Microprocessor Management o f P-f
and Q-v loops of Alternator using Dead
Beat Controllers and Observers”,
The Institution o f Engineers (India),
N.C.E.E., Memo No. PLL/1470,
dt 30-10-96,
158. G. M. Khan,
Accepted for Presentation
“Microprocessor Management o f electric
G. P. Chhalotra,
Power Station using z-transformation for
S. K. Dabadghao etal
Dead Beat controller and Observer”, Ibid
Institution o f Engineers N.C.E.E,
Chandigarh, No. PLL/1470, Oct. 1996
“Reliability Attributes of Computer Basic
Memory elements”, XIII M. P. Young
Science Congress, Gwalior, March 1998
160. G. M. Khan,
G. P. Chhalotra etal
“Study of Built in Reliability of
Microprocessors using Physical and
Effective Parameters o f Materials and
Spaces”, The Institute o f Engineers
(India) No. SP/T-185/ET/CS-89/20-11-96
Paper Considered
161. G .M . Khan,
G. P. Chhalotra etal.
“Study o f Reliability Parameters of
Microprocessors Logic Gates Under
Material Parameters and Distribution
Functions”, AMSE, France, Demilune,
1998
162. G. P. Chhalotra,
G. M. Khan etal.
“Fuzzy Computers and Their
Applications to Structural Material
Problems”, Paper No. 191, International
Conference, Accepted for Presentation
at
MS-97
Victoria
University,
Melbome, October 1997
163. G. M. Khan,
G. P. Chhalotra etal.
“Fuzzy Technology a solution o f Pollution
Dynamics and their Effects on Human
Beings”, M S-97, Paper No. 190, Victoria
University, Melbome, Australia, October
1997
164. N. L. Prajapati,
“Reliability Attributes of Electronics and
G. P. Chhalotra and
Telecommunication Materials Under
G. M. Khan etal.
Various Gases Pollutants”, International
Academy of Physical Sciences IAPS
(CONIAPS-96), October 14-15, 1996,
Accepted for presentation
165. G. M. Khan,
G. P. Chhalotra, etal.
‘Effects of Air Pollution on the Reliability
o f Power system”, Accepted for
Presentation and Published in the
Proceeding
Third
of
VRCE
International
Conference,
Code No. 0005, pp 540
******
Nagpur,