LUXMATE Devices
D a y l i g h t Co n tr o l l e r L M -TLX
R e l a y Co n tr o l l e r LM -R LX
The World of LUXMATE
with LM-TLX
and LM-RLX
Operate
The new daylight controller:
Easy to plan, easy to install
and always easy to use
Visualize
Communicate with outside
systems
Building Management Level
Monitor
Check
Maintain
Issue permissions
305 mm wide, 252 mm long and 56
mm high. From the outside the LMTLX device is rather inconspicuous.
But inside, is intelligent technology
that simplifies the work of planners,
fitters and building owners. A small
box for daylight control that fulfils
three wishes at once and creates an
optimal work environment for people.
- Flexibility in planning, since commissioning is implemented over a bus
and addressing the lighting and
modules can therefore be adapted
to existing needs
- Simplicity in installation, since the
connection is made without tools
and saves time
- Intelligence for the future, since the
usage of the room can change at
any time
Daylight
Blind
Dynamics
Time
Application example: Store room without windows
Low-cost switching of the artificial light with LM-RLX
and non dimmable operating modules (conventional
ballasts, standard electronic ballasts)
Automation Level
Indoor climate
Super-room
Burning hours
Emergency light
Luminaire 1
Luminaire 5
Luminaire 2
Luminaire 6
Remote maintenance
Operate
daylight dependent
dimming with
LM-TLX
Daylight
Artificial light
LM-RLX
switching the
light with
LM-RLX
Luminaire 3
Luminaire 7
Luminaire 4
Luminaire 8 (with emergenc
Field Level
Blind
Window
Indoor climate
Momentary action switches
Emergency light
Bus/Mains
LM-TLX is really
smart
LM-TLX is fast
and ready
LM-TLX is really
narrow
With a height of 56 mm
the LM-TLX module is
the lowest of its kind.
This is of great benefit
when fitting in false ceilings
because there is no shortage of space
due to other installations. Connection
sockets on the side add to this advantage. As a result, the LM-TLX module
can also be fitted into extremely narrow false ceilings.
Pre-installed luminaires are connected to
the LM-TLX module
without tools by means
of the plug&play procedure,
saving time and avoiding mistakes.
The well thought-out installation
method enables the "satellite
system" to be expanded easily at any
time.
The LM-TLX module
is functional as soon
as it has been connected. Addressing can
also be implemented over
the bus after installation and after
closure of the ceiling panels. In this
way it is possible to reconfigure the
lights and other devices at any time,
without additional cables and without
having to open the ceiling panels.
This applies not only for setting the
scenes and the daylight dependence,
but also for the addressing after
room borders or workplaces and furniture have been relocated or replaced.
Application example: Open-plan office with windows
Daylight dependent dimming with LM-TLX and digital
dimmable ballasts (PCA)
Luminaire 1
Luminaire 4
Luminaire 7
Luminaire 5
Luminaire 8
Luminaire 6 (with emergency light)
Luminaire 9
LSD
Luminaire 2
PST
PST
LM-TLX
Luminaire 3
cy light)
LM momentary action switch
LM momentary action switch
Good light is completely natural
Modern offices and administration
buildings are characterized by a high
level of flexibility. Whether open-plan
or individual office, the room architecture changes and so do the requirements of the people working there.
It is particularly important that the
lighting should be able to adapt to
changing situations. With the LM-TLX,
LUXMATE delivers the appropriate
solution.
The daylight controller enables the
amount of artificial light to be adapted to the existing daylight in order
that it conforms with the individual
requirements of the user. Moreover,
additional LUXMATE modules enable
other room functions, e.g. blinds or
air-conditioner, to be tuned to one
another, regulated and aligned on
what the user is currently doing. The
result is an optimal environment in
the room, which is stimulating and
which increases people's well-being.
Everything under control
The LM-TLX is installed complete in
the hollow space inside a false ceiling
and addressed over a bus line. The
module can also be addressed and
configured at a later time without
tools and without rewiring. A single
LM-TLX can control 9 pairs of luminaires individually over the various
LUXMATE control units. Furthermore,
pre-defined scenes can be recalled at
any time and adjusted manually. 3
arbitrary scenes can compensate
automatically for the daylight. Operation is through the user locally.
A further benefit provided by the
LUXMATE light and room management system is energy optimization
of the building. Adaptation of the
artificial light to the available amount of daylight leads to considerable
savings in energy. All this takes place
in the background, imperceptibly for
the user but with maximum advantage for humans and their well-being.
The LM-TLX is installed in the hollow space
inside a false ceiling. The module can then be
addressed and configured at any time over a
bus, without tools and without rewiring.
Everything inside, everything supplied:
Daylight controller LM-TLX
Function / Application
The daylight controller LM-TLX is used
in open-plan offices and adjacent individual offices or in large rooms in
which the emphasis is on the use of
natural light, the saving of energy, and
ergonomic aspects such as the wellbeing of the persons using the room.
The LM-TLX enables the artificial light
to be controlled according to the
amount of daylight entering the room.
0%
25 %
50 %
Text for Invitation of Tenders
Electronic module with bus connection
for controlling artificial light. Intended
for separate control of up to 9 pairs of
luminaires using "quick-install" connection technology; 2 of these outputs for
controlling luminaires with emergency
light contact unit; 5 direct RJ-45
connections of which 1 for a light sensor, 2 for local momentary action switches and 2 for presence sensors. New
addressing, re-addressing and configuration possible without access to the
LM-TLX module. Flat, galvanized, painted steel case, with all electrical connections at the sides. Installation by means
of fixing angle (supplied), suitable for
direct or suspended fixing.
Equivalent to LUXMATE
500 lx
Daylight
Artificiallight
Type
LM-TLX
Article Number
22115147
Planning Instructions
-Luminaire connections: The luminaires must be prepared for dimmable
digital ballasts (PCA), electronic
transformers (TEL) and phase dimmers (PHD). Cable length (power
line and DSI jointly in one cable):
max. 15 m. The luminaire connecting cables must be fitted by the
manufacturer or on site with Wieland connectors (Type GST 18i5S S1
ZR1).
-Connections for presence sensors
PST: Cable length max. 10 m. Care
must be taken during assembly that
the cable is attached to the correct
pins of the 8-pole RJ-45 connector.
-Connections for momentary action
switches with 4-pole RJ-45 connector; max. cable length 10 m.
-Power line / bus connection with
Wieland female part (Type GST
18i5S B1 ZR1).
-Light sensor LSD: Connection over
4-pole RJ-45 connector: max. cable
length 250 m; install according to
fitting instructions. As an alternative to several light sensors, especially in larger buildings, an external
daylight sensor on the roof can be
used over the LUXMATE bus
together with a LUXMATE room
automation computer.
-Distributor box: The distributor box
must be provided by the building
owner for wiring the LM-TLX modules in "satellite cabling".
-Additional LUXMATE modules, e.g.
LM-IRB, can be connected at the
RJ-45 connection Line out/Bus out.
This connection must not be used
for further LM-TLX modules.
-The LM-TLX must be counted once
for calculating the bus power supply
(LM-BV, LM-BVS35), and 9 times for
the database of the LUXMATE room
automation computer LRA-1500(x).
Mains
LUXMATE-BUS
3
2
Infrared input module
LM-IRB
2 3
Infrared sensor
IRED
2
Infrared control unit
IRS
2
2
alternativ
Double momentary
action switch
(24V SELV)
2
Light sensor
LSD
3
3
2
For additional LUXMATE equipment, not for through-connection of further LM-TLXes
3
3
2
3
max. 2 PCA (TEL, PHD)
Presence
sensor
PST
3
3
2
2
max. 2 PCA (PHD, TEL)
max. 2 PHD (TEL, PCA)
3
3
2
2
3
2
3
2
Nominal voltage
230/240 V~, 50/60 Hz
Permissible input voltage
198...264 V~, 50...60 Hz
Power loss
<8W
Inputs
2 double momentary action switches (24V
SELV)
1 light sensor LSD
(2 x 1,5 mm 2; max. 250 m)
LUXMATE-Bus
2 movement sensors PST
(12V supply through LM-TLX)
Outputs
9 luminaire outputs (power and DSI) for luminaires with max. 2 lamp control modules
(PCA, PHD, TEL), of which 2 outputs also for
luminaires with independently powered
emergency light contact units.
Power line/bus for additional LUXMATE
modules (max. 100W)
Permissible ambient temperature
0...50 °C
Degree of protection / protection class
IP 20
SKI (earth connection)
Notes
All luminaires are connected by means of
connectors directly with the box, which is installed on the ceiling. This must be taken into
account when using the LM-TLX in countries
where this kind of installation is not usual.
Installation
The LM-TLX is screwed to the ceiling
using the fixing brackets supplied.
Dimensions
305 x 252 x 56 mm (without fixing angle
and connector)
Case material
Steel plate, galvanized and painted
orange (RAL 2008 matt)
Weight
approx 2500 g
Miscellaneous
Status LED for displaying operating status
Addressing
1 room, group, own address per luminaire
output
1 separate address for LSD
1 room, group address per double momentary action switch together with 1 presence
sensor each
Control range
0; 1 - 100% (rel. lighting intensity)
Mode
COMMON (all)
INTENS (brightness)
305 mm
56 mm
252
2
Emergency light contact unit
3
2
max. 2 PCA (PHD, TEL)
3
max. 2 PCA (PHD, TEL)
2
Emergency light contact unit
max. 2 TEL (PCA, PHD)
3
max. 2 PCA (PHD, TEL)
For unrestricted switching
Relay controller LM-RLX
Function / Application
The relay controller LM-RLX is used
in open-plan offices and adjacent
individual offices or in large rooms in
which the emphasis is on economy.
The LM-RLX enables the artificial
light to be controlled according to
whether anyone is in the room. The
emergency light function is also
integrated in the concept.
Text for Invitation of Tenders
Electronic module with bus connection
for controlling artificial light. Intended
for separate control of up to 9 luminaire outputs with a maximum connected
load of 250W per luminaire output using
"quick-install" connection technology; 2
of these outputs for controlling luminaires with emergency light contact unit; 6
direct RJ-45 connections of which 2 for
local double momentary action switches, 2 for emergency light sensors and
2 for presence sensors. New addressing
and re-addressing possible without
access to the LM-RLX module. Flat, galvanized, painted steel case, with all
electrical connections at the sides.
Installation by means of fixing angle
(supplied), suitable for direct or suspended fixing.
Equivalent to LUXMATE
Type
LM-RLX
Article Number
22154049
Planning Instructions
-Luminaire connections: The luminaires must be must be fitted with operating modules suitable for switching lamps up to 230/250V a.c. The
luminaire connecting cables must
be fitted by the manufacturer or on
site with Wieland connectors.
-Connections for presence sensors
PST: Cable length max. 10 m. Care
must be taken during assembly that
the cable is attached to the correct
pins of the 8-pole RJ-45 connector.
-Connections for momentary action
switches and emergency light sensors with 4-pole RJ-45 connector;
max. cable length 10 m.
-Power line / bus connection with
Wieland female part.
-Distributor box: The distributor box
must be provided by the building
owner for wiring the LM-RLX modules in "satellite cabling".
-Additional LUXMATE modules, e.g.
LM-IRB, can be connected at the
RJ-45 connection Line out/Bus out.
This connection must not be used
for further LM-RLX modules (Type
GST 18i5S B1 ZR1).
-The LM-RLX module must be counted once for calculating the bus
power supply (LM-BV, LM-BVS35),
and 9 times for the database of the
LUXMATE room automation computer LRA-1500(x).
Mains
LUXMATE-BUS
3
2
Infrared input module
LM-IRB
3
Infrared sensor
IRED
Infrared control unit IRS
3
2
alternativ
Double momentary
action switch(24V
SELV)
3
For additional LUXMATE equipment, not for through-connection
of further LM-RLXes
3
2
Emergency
light sensor
3
3
3
Presence
sensor
PST
3
HV tungsten halogen lamp
3
3
HV tungsten halogen lamp
3
3
EVG (PC PRO), KVG
EVG (PC PRO), KVG
3
3
3
2
Nominal voltage
230/240V~, 50/60Hz
Permissible input voltage
207...264V~, 50...60Hz
Power loss
< 8W
Inputs
2 double momentary action switches (24V
SELV)
2 emergency light sensors LUXMATE bus
2 movement sensors PST (12V supply
through LM-RLX)
Outputs
9 luminaire switching outputs (power line)
for luminaires with max. 250W per luminaire
output, of which 2 outputs also for luminaires
with independently powered emergency light
contact units.
Power line/bus for additional LUXMATE
modules (max. 100W)
Permissible ambient temperature
0...50°C
Degree of protection / protection class
IP 20
SKI (earth connection)
Notes
All luminaires are connected by means of
connectors directly with the box, which is
installed on the ceiling. This must be taken into
account when using the LM-RLX in countries
where this kind of installation is not usual.
Installation
The LM-TLX is screwed to the ceiling using
the fixing brackets supplied.
Dimensions
270x245x54
Case material
Steel plate, galvanized and painted
Weight
approx 2500 g
LRA-LUXMATE Room Automation
PCSI
Miscellaneous
Status LED for displaying operating status
Adressing
1 room, group, own address per luminaire
output address
1 room, group address per double momentary contact switch together with 1 presence
sensor each
Mode
COMMON (all)
INTENS (brightness)
245 mm
54 mm
270 mm
2
Emergency light contact unit
3
Emergency light contact unit
3
Light Management and Safety
Lighting Combined
Up to now, general lighting and
safety lighting have been regarded as
separate systems and have therefore
been realized separately. The LM-TLX
and LM-RLX enable the safety
lighting to be integrated into the
LUXMATE system, exploiting synergies in control and monitoring which
would otherwise be unused. A number
of different solutions are possible for
emergency lighting, depending on the
layout of the LUXMATE facility.
Simple implementation
In the simple implementation, two
luminaires with integrated emergency
light contact units are connected to
each of two outputs of the LM-TLX.
From a suitable location, the emergency luminaires are switched to
emergency light operation over the
LUXMATE bus. The outlay for wiring
is considerably reduced.
Convenient implementation
In the most convenient implementation, a light sensor is installed for each
emergency lamp, directed towards
the lamp. By means of evaluation
electronics, the light sensor value is
supplied to a corresponding momentary action switch input of the LMTLX, this input having been configured in a customer-specific way. The
visualization, control and monitoring
requires that the emergency light
software LMW-ELM is installed on a
separate LUXMATE server or on the
LUXMATE room automation computer
LRA.
The benefits for the customer:
- Automatic or manual initiation of
the function test and operating
time test
- Monitoring of the emergency light
electronics, rechargeable battery
and lamp (failure, aging)
- Documentation of the emergency
light test
Accessories for LM-TLX y LM-RLX
Light sensor LSD
(only for LM-TLX)
The light sensor LSD measures the daylight
entering the room through the window. The
connected LM-TLX module uses this value for
controlling the room lighting. Installation and
planning instructions must be followed exactly
in order to ensure proper
functioning of the daylight dependent controller.
Type
LSD
Article Number
20731906
Infrared control unit
LM-IRB
IRED
IRS
The infrared input module LM-IRB receives the
signals of the infrared control unit IRS over the
IR sensors IRED and converts these into LUXMATE bus signals. One LM-IRB can convert the
infrared signals of up to 2 differently configured
infrared remote controllers. The IR remote controller enables three different scenes to be programmed and recalled in the room. In addition,
LUXMATE outputs can be separately switched
and dimmed in up to 5 domains.
The infrared sensor IRED for ceiling installation
converts the signals from the infrared remote
controller IRS into electrical signals and sends
these on to the LM-IRB.
Up to 9 different IR channels can be set at the
IRS. The IRS can basically be used to operate
any kind of LUXMATE output, e.g. also blinds or
screens.
Type
Article Number
IRS
20975492
IRED
22114587
IRB
22114219
Presence sensor PST
Der Anwesenheitssensor PST ist optimiert für El
The presence sensor PST has been optimized for
office applications and can be connected directly to the LM-TLX or LM-RLX module. At an
installation height of 3m, the slightest movements are detected reliably within a recording
area of 4m x 4m.
The unit can be recessed into the ceiling, semirecessed in a box, or surface mounted. The line
length from PST to LM-TLX or LM-RLX must not
exceed 10 m.
Type
PST
Article Number
22153900
Wieland connector
GST 18i 5-pole 250/400V, 16 A with screw
connection for conductors 1.5 - 2.5 mm2, single
wire and finely stranded, one connection per
pole, unmounted with strain relief, for cable
with diam. 9.8 - 12.5 mm.
Insulation removal length: 8 mm
Sheath removal length: 46 mm
Type
for LM-TLX:
TLX BU 5 POL
TLX ST 5 POL
for LM-RLX:
Article Number
22153929
22153928
on request
Circle control point
Control spot for recalling three scenes and for
controlling brightness and glare protection,
white and neutrally imprinted “1”, “2” and “3”
for general applications
Type
Article Number
LM-CSW (white 1,2,3)
22154211
LM-CSG (grey 1, 2, 3)
22154212
LM-CSS (silver 1, 2, 3)
22154213
LM-CSM (brass 1, 2, 3)
22154214
other icons on request
Presented by:
04/2004 - E
SPAIN
LUXMATE S.L.
C/ Isla de Hierro n–° 5
Polígoni Industrial Norte
San Sebastián de los Reyes
E-28700 Madrid
Tel. +34–(0)91–659 30 76
Fax +34–(0)91–653 03 74
luxmate@luxmate.es
www.luxmate.com
Technical alterations reserved. Art.-Nr. 22.154.042
GREAT BRRITAIN
LUXMATE Limited
Thomas House
Hampshire International Business Park
Crockford Lane, Chineham
Basingstoke RG24 8WH
Tel. +44–(0)1256–7075-70
Fax +44–(0)1256–7075-65
luxmate@uk.luxmate.co.at
www.luxmate.com
© LUXMATE Controls GmbH
INTERNATIONAL
LUXMATE Controls GmbH
Schmelzhuetterstrasse 26
A-6850 Dornbirn/Austria
Tel. +43–(0)5572–599–0
Fax +43–(0)5572–599–699
luxmate@luxmate.co.at
www.luxmate.com