Advantage
TOKISTAR
TOKISTAR LIGHTING
Advantage Systems
F
or years, lighting professionals have relied
on Advantage Systems from Tokistar ® to
provide their clients with the most attractive,
efficient and durable form of decorative
indirect lighting.
Advantage’s flexible conductors conform
precisely to curves, twists and turns. Since
the flexing is on the cable, lamps remain firmly
seated in their sockets. With its many unique
features, Advantage produces uniform light
from more distant socket spacing. This means
the system costs less to install, operate and
maintain.
Advantage can be specified in many
different configurations. Light
sources include LEDs in 2400K
and 3000K, and the choice of five
xenon lamps. We also offer shielded
systems, including a tube guard
to make Advantage suitable for
outdoor use.
Recessed lamp contacts
Contents
Flexible conductor conforms to
any twist or turn
Introduction | 2-3
Light Sources | 4-5
Design Guidelines | 6-7
The Basic System | 8
Options | 9
Connectors & Accessories | 10
Self-mounting sockets
Transformers | 11
Outdoor AVO | 12-13
Shielded Channels | 14-15
System Layout | 16
Installation Guidelines | 17
Specifications | 18
Photometrics | 19
Cover:
Advantage System attractively
highlights this banquet facility.
Lighting Design by ICE/Japan.
2 | TOKISTAR LIGHTING
Select from seven different
light sources, including our
LED modules
LED modules consume only 0.72
Watts, making Advantage more
efficient than ever. Compared to our
5 Watt lamps, LEDs reduce energy
use by 85%. Advantage LED modules
are available in 2400K and 3000K.
Optional reflectors boost light
output in a focused direction
Optional lens shields lamp
Reflector spreads and softens light
TOKISTAR LIGHTING | 3
Light Sources
S
electing the light source is the first step in tailoring an
Advantage System to a specific design task. We offer
seven light sources, and one of these is sure to get the job
done right.
Advantage was originally designed for use with rigid-loop
xenon lamps, and for very good reason. These lamps evenly
distribute light in all directions,
and their frosted envelope casts
a smooth glow of light without
filament images.
Xenon lamps also produce a warm and inviting color of light. With life ratings up to 20,000 hours, they are
perfectly suited to commercial applications where lamps are operated continuously. In addition to our xenon
lamps, we offer 2400K and 3000K LED modules for use in new and existing Advantage systems.
LED Modules
A
dvantage LED modules consume only 0.72 Watts
each, making them the most efficient of all light
sources. They do an outstanding job of emulating true
incandescent light. Each LED module has on-board
circuitry enabling it to operate from 24 VAC magnetic
transformers. This allows you to take complete control
of the environment and operate our LEDs from
standard low-voltage dimming systems.
To optimize operating life, each module is packaged
in a porcelain base to absorb and dissipate heat away
from the LED. This also means Advantage LEDs may
be specified in heat-sensitive applications you may have
avoided in the past. Since these solid-state devices have
no filaments, vibration will not cause them to fail.
0.72 Watt 2400K LED
These 0.72 Watt LED modules are highly energy
efficient and are for use with all socket spacings.
They are not for use with symmetrical reflectors.
0.72 Watt 3000K LED
Part #: AVLED-WW
Volts: 24 VAC
Color: 2400K
Output: 21 Lumens
Life: 40,000 - 50,000 Hours
4 | TOKISTAR LIGHTING
With such low power consumption, maximum
run lengths become a great deal longer. Fewer
transformers and secondary circuits significantly
reduce installation costs.
Part #: AVLED-IW
Volts: 24 VAC
Color: 3000K
Output: 24 Lumens
Life: 40,000 - 50,000 Hours
Frosted Xenon Lamps
5 Watt 2400K Xenon
Our 5 Watt lamp has long been considered the standard in
xenon lamps. It provides an ideal balance of lumen output,
color temperature and life to meet the requirements
of most applications. This lamp may be used with any
Advantage profile or option.
Part #: XB-5F
Volts: 24 VAC
Color: 2400K
Output: 40 Lumens
Life: 20,000 Hours
3 Watt 2300K Xenon
8.5 Watt 2500K Xenon
As the demand for more energy-efficient light sources has
increased, so has the demand for our 3 Watt lamps. These lamps
are now considered ideal for many lower-ambient settings and
may be used with any Advantage profile or option.
Our 8.5 Watt lamp provides greater lumen output in
applications where more heat can be tolerated. This
lamp is not for use with AV-LNS lens covers, AV Shielded
Channels or Series AVO.
Part #: XB-3F
Volts: 24 VAC
Color: 2300K
Output: 12.5 Lumens
Life: 20,000 Hours
Part #: XB-8F
Volts: 24 VAC
Color: 2500K
Output: 70 Lumens
Life: 20,000 Hours
Cool White Xenon Lamps
Our cool white lamps have glass envelopes tinted to create
a color temperature of 3200K, making cool-colored walls
and ceiling finishes appear more vibrant and true. Advantage
cool white lamps are color balanced to complement other
fixtures with higher Kelvin temperatures.
5 Watt 3200K Xenon
8.5 Watt 3200K Xenon
The XB-5FB is both energy efficient and attractive. This
lamp is not for use with AV-LNS lens covers, AV Shielded
Channels or Series AVO.
Our 8.5 Watt lamp provides greater lumen output in applications
where more heat can be tolerated. This lamp is not for use with
AV-LNS lens covers, AV Shielded Channels or Series AVO.
Part #: XB-5FB
Volts: 24 VAC
Color: 3200K
Output: 20 Lumens
Life: 10,000 Hours
Part #: XB-8FB
Volts: 24 VAC
Color: 3200K
Output: 40 Lumens
Life: 10,000 Hours
TOKISTAR LIGHTING | 5
Design Guidelines
Quality indirect lighting requires a seamless
flow of light. Proper spacing between sockets
is the key factor in achieving this goal. Surface
finish also has an influence. A matte white finish
inside the cove and on the reflective surface is
best. A glossy surface will reflect lamp images,
no matter how closely the sockets are spaced.
Socket Spacing
Recommended socket spacing varies,
depending on how close the fixture is
positioned from the reflective surface.
Maintain the minimum distances shown
to eliminate socket shadows and hot
spots. More lamps will produce more light, but
they will not always produce more uniform light.
Recommended Spacing Guide
D = Distance to surface
S = Socket spacing
D
S
S
S
The following are some of the most popular
applications of Advantage, including helpful tips on how
different variations can produce the best results:
Cove Lighting
Where Advantage is placed
inside a cove will produce
different effects. If the
fixture is placed close to
the cove fascia, it will trap
more light in the cove and
create a sharper contrast
of light. Positioning the
fixture closer to the wall
will illuminate more of the
ceiling and create a softer
gradation of light.
6 | TOKISTAR LIGHTING
D
S
1.25”
2”
3”
4”
No greater than 2.4” O.C.
No greater than 3.0” O.C.
No greater than 4.0” O.C.
No greater than 6.0” O.C.
Under Counter Lighting
When positioned under a countertop,
Advantage will produce a soft glow of
light on the wall behind it. To prevent
direct contact with lamps, consider s
ifying our AV-LNS lens covers.
Wall Washing
Advantage’s small configuration makes
it an ideal source for illuminating from
within niches and behind cornices. For
more impact, consider specifying our
symmetrical reflectors to concentrate
more light in a focused direction.
Showcase/Shelf Lighting
Advantage may be used
to softly illuminate fine
art and other artifacts.
Fixtures may be placed
under shelves or
positioned vertically at
either side of a cabinet.
To direct and conceal
light, consider specifying
our asymmetrical
reflectors.
Under Cabinet Lighting
Fixtures may be
positioned behind
the lips of cabinets to
direct light down onto
a countertop. If the
fixture requires shielding,
consider specifying an
Advantage Shielded
Channel with continuous
lens cover.
TOKISTAR LIGHTING | 7
The Basic System
To specify the most attractive form of Advantage
for an application, determine the appropriate light
source and socket spacing from the guidelines
presented on pages 4 through 7. Then tailor the
system to the specific task by selecting from the
listed options and accessories.
AV - 3 - X5 - LNS
Socket Spacing
Light Source
Options
Code
Inches (mm)
Code
Style
Code
Option
2.4
2.4” (60 mm)
X3
3 Watt 2300K Xenon
LNS
Lens Cover
3
3.0” (75 mm)
X5
5 Watt 2400K Xenon
MC
Mounting Channel
4
4.0” (100 mm)
X8
8.5 Watt 2500K Xenon
SR
Symmetrical Reflector
6
6.0” (150 mm)
X5B
5 Watt 3200K Xenon
AR
Asymmetrical Reflector
X8B
8.5 Watt 3200K Xenon
BK
Black Finish
LWW
0.72 Watt 2400K LED
LIW
0.72 Watt 3000K LED
Before deciding on the finished
product, it is important to note
that not all light sources can be
used with all options. Take into
account these guidelines:
• Due to the surface temperature of lamps, our 8.5 Watt and cool white lamps are not for use with AV-LNS lens covers, AV Shielded
Channels or Series AVO.
• Symmetrical and asymmetrical reflectors are not for use with AV-LNS lens covers, AV Shielded Channels or Series AVO.
• LED modules do not emit light from below, so there is no symmetrical reflector option with this light source.
• Fixtures with 2.4” socket spacing are not for use in AV Shielded
Channels or Series AVO.
• Refer to page 11 for minimum distances to be maintained between fixtures and combustible surfaces.
The basic system includes lamp sockets with
integral reflectors. When specified with our
LED light sources, these reflectors are not
included. Each socket
15/16”
has four holes to
accept mounting
screws. Two screws
15/16”
installed at opposing
corners provide easy
and secure mounting.
8 | TOKISTAR LIGHTING
Options
15/16”
Lens Covers
To prevent direct contact with lamps, we offer
a protective clear polycarbonate lens. The ends
of each lens are open to allow heat to vent. This
optional lens cover is not for use with 8.5 Watt
or cool white xenon lamps.
1-3/16”
Part #: AV-LNS
Mounting Channel
1”
A high-temperature plastic mounting channel
is available for straight runs. The channel is
screwed in place and the sockets snapped in,
ensuring linear integrity of the fixture and
reducing installation time.
1-1/8”
Part #: AV-MC
Symmetrical Reflector
For applications where a more concentrated
beam of light is needed, these reflectors
easily snap onto our sockets. They may be
used with or without our mounting channel,
increasing light output toward the center line
of the fixture.
1-1/4”
15/16”
Part #: AVWH-REF-S (White)
Part #: AVBK-REF-S (Black)
Asymmetrical Reflector
For showcase and shelf lighting applications, these
reflectors direct light output to one side. They
also absorb and deflect heat from the surface
next to the fixture, and may be used with or
without our mounting channel.
15/16”
15/16”
Part #: AVWH-REF-A (White)
Part #: AVBK-REF-A (Black)
Black Finish
Although most Advantage Systems are concealed
behind moldings and ledges, there are applications
where the fixture may be exposed to direct view.
Advantage is available in a high-tech black finish
to complement such installations.
15/16”
15/16”
Option Code: BK
TOKISTAR LIGHTING | 9
Connectors
Terminal Block Connectors
Part #: AV-CONN
One end of this connector screws directly to the Advantage fixture. The other
end accepts AWG# 14, 12, or 10 wire. A screw hole is provided in the center
of the connector for secure mounting.
Mini Junction Box Connectors
Part #: AV-JBOX
If installation involves running wire through a building structure, special wiring
methods to the fixture may be required by code. A miniature junction box is
available with a 1/2ӯ knockout for use with conduit fittings.
T-Connection System
Part #: AV-TCON
(Includes one female and one male connector)
For feeding multiple fixtures from one wiring harness, these connectors are a great
convenience. Female connectors are attached to the main harness at any interval,
and the mating male connectors attach to the end of each fixture.
Accessories
End Caps
Part #: ECD-WH (White)
Part #: ECD-BK (Black)
These end caps are attached
to the end of each fixture to
insulate the conductors.
10 | TOKISTAR LIGHTING
Mounting Screws
Channel Clamps
Part #: AV-MS
Part #: AV-CL
Each lamp
socket of
Advantage
has four
mounting
holes. Use
two screws
in opposing corners for
secure mounting.
These clamps
are for use
with our
AV-MC
Mounting
Channel.
The clamps screw in place and
the channel snaps in.
Transformers
Magnetic Transformers
Tokistar magnetic transformers operate from a 120 VAC/60 Hz input and are fully dimmable. The 24 Volt
secondary outputs have inherent circuit protection. Larger capacity transformers have magnetic breakers
to prevent nuisance tripping. T24 Series transformers are provided in enclosures rated Nema 3R and are
suitable for wet locations. C2 Series transformers are suitable for dry location only. Transformers should
be installed in an accessible location where there is free air circulation.
Part #
Outputs
H
W
D
Weight
C2-40-24V
1 @ 40 Watt
5.75”
2.25”
2.25”
2 lbs
C2-96-24V
1 @ 96 Watt
6.5”
3”
2.5”
3 lbs
T24-100
1 @ 100 Watt
9”
3”
3”
5 lbs
T24-150
1 @ 150 Watt
9”
3”
3”
5 lbs
T24-250
1 @ 250 Watt
9.5”
4.5”
3.5”
8 lbs
T24-300
1 @ 300 Watt
9.5”.
4.5”
3.5”
8 lbs
T24-500
1 @ 500 Watt
10.5”
4.5”
4.5”
12 lbs
T24-600
1 @ 600 Watt
10.5”
4.5”
4.5”
15 lbs
T24-750
2 @ 375 Watt
10.5”
4.5”
4.5”
15 lbs
T24-1000
2 @ 500 Watt
11.5”
7”
5”
28 lbs
T24-1200
2 @ 600 Watt
11.5”
7”
5”
28 lbs
Larger capacity transformers with
multiple outputs can be centrally
located and feed fixtures in
either direction.
Sizes and weights shown
are approximate and
subject to change without
notice.
H
Consult factory for
transformers with inputs
of 230 or 277 VAC.
D
W
Transformer
120 VAC input
Do not exceed maximum fixture length
Advantage fixture
Do not exceed transformer output rating
Dimming
All transformers are fully dimmable with the appropriate style of dimmer suitable for use with magnetic
transformers. Some dimmers require certain minimum loads be met and might require a synthetic load
device to work with LED Modules. For further information, consult with the dimmer manufacturer or
visit our website link at http://tokistar.com/adv_spec.html#dimming.
TOKISTAR LIGHTING | 11
Outdoor AVO
Tokistar’s AVO Series brings all the
benefits of Advantage to the great
outdoors. Discreetly hidden behind
ledges or cornices, AVO does an
excellent job of accenting exterior
facades with a uniform wash of light.
It is also ideal for accenting spaces
beneath overhangs, such as
bench seating areas.
AVO Series consists of a UV-stabilized polycarbonate tube
guard which surrounds and protects the fixture within.
Inside the tube is the Advantage fixture, installed into a highly
polished aluminum reflector.
AVO - 3 - X5
Socket Spacing
Light Source
Code
Inches (mm)
Code
Style
3
3.0” (75 mm)
X3
3 Watt 2300K Xenon
4
4.0” (100 mm)
X5
5 Watt 2400K Xenon
6
6.0” (150 mm)
LWW
0.72 Watt 2400K LED
LIW
0.72 Watt 3000K LED
Wet Location
Listed
Servicing lamps is easy with series AVO. Remove the
end cap and slide the fixture out of the tube guard for
easy access.
12 | TOKISTAR LIGHTING
The circular design of AVO allows rotation
of the fixture for precisely focusing light in
the optimal direction.
1.75”
3”
Maximum fixture length of 8 feet
Part #: AVO-BKT
Mounting brackets hold the fixture securely
in place. Two brackets are required for each
fixture up to 5 feet in length. A third bracket is
recommended for fixtures up to 8 feet long.
Part #: AVO-ECL
Each feed end of an AVO fixture is provided
with a gasketed end cap. This cap is adjustable
to point the feed wire in the proper direction
to prevent the entry of water.
2.5”
Part #: AVO-BKT-V
When AVO is positioned vertically, a
support bracket is recommended for the
lower end of each run.
Part #: AVO-ECD
The termination of an AVO fixture is
sealed with a gasketed end cap to prevent
water from entering the tube guard.
TOKISTAR LIGHTING | 13
Shielded Channels
Tokistar’s AV Shielded Channels offer
the perfect complement to Advantage.
These aluminum profiles include
continuous lens covers for use in areas
where lamps might come in contact
with persons or combustible materials.
They are also ideal for applications in
food service areas that require a shield
over the light source.
Select either a clear or frosted lens. The frosted lens
reduces lamp imaging on glossy surfaces.
The aluminum bases are available in four
finishes: Satin Aluminum, White, Polished
Gold, and Polished Aluminum.
Fixtures are easily maintained
by removing the lens cover and
changing the lamps.
14 | TOKISTAR LIGHTING
A special snap socket is supplied
with Advantage when specified as
an AV Shielded Channel System.
AVCC - SA - 4 - X5
Model
Surface Finish
Socket Spacing
Light Source
Code
Style/Lens
Code
Color
Code
Inches (mm)
Code
Style
AVCC
No Fascia/Clear
SA
Satin Aluminum
3
3.0” (75 mm)
X3
3 Watt 2300K Xenon
AVCF
No Fascia/Frosted
WH
White
4
4.0” (100 mm)
X5
5 Watt 2400K Xenon
AVLC
Fascia/Clear
PA
Polished Aluminum
6
6.0” (150 mm)
LWW
0.72 Watt 2400K LED
AVLF
Fascia/Frosted
PG
Polished Gold
LIW
0.72 Watt 3000K LED
AVC Series
AVL Series
The AVC profile is designed
for attaching to flat surfaces,
or in 90° corners to focus
light in the required direction.
The AVL profile attaches to the
front edge of shelving, cabinets or
anywhere a decorative fascia is
required to conceal the light source.
1-5/8”
1-1/2”
1-1/4”
AV-EC-WH
AV-EC-SV
AV-EC-BK
End caps are available in white, silver or black.
1-5/8”
AV-LEC-WH AV-LEC-SV AV-LEC-BK
End caps are available in white, silver or black.
TOKISTAR LIGHTING | 15
System Layout
Advantage Lighting Systems are powered from 24 VAC low-voltage transformers. Xenon lamps may operate
from magnetic or electronic transformers. LED Modules operate from magnetic transformers only.
Typical Layout With
Dual Output Transformer
Typical Layout With
Single Output Transformer
End of length
Advantage fixtures not to
exceed maximum length
Advantage fixture not to
exceed maximum length
End of lengths
Maximum Fixture Length
The maximum load of each fixture must not exceed 480 Watts (20 amps @ 24 Volts).
In addition to this limitation, consideration
must be given to the affects of voltage
drop. Fixtures with lower wattage lamps
(such as LEDs) and more distant socket
spacing have recommended maximum
lengths less than 480 Watts. Conforming
to the lengths in this chart ensures no
fixture exceeds 480 Watts and will not
be subjected to excessive voltage drop.
Secondary Lead Wire
Maximum Lamps/Circuit
5 Watt/X5
8.5 Watt/X8
0.72 Watt LEDs
160 Lamps
96 Lamps
56 Lamps
400 LEDs
32’ (9.6 M)
40’ (12 M)
48’ (14.4 M)
60’ (18 M)
19’ (5.76 M)
24’ (7.2 M)
32’ (9.6 M)
48’ (14.4 M)
Lamp Spacing
2.4” O.C. (60 mm)
3” O.C. (75 mm)
4” O.C. (100 mm)
6” O.C. (150 mm)
The distance from the transformer to the fixture and the load
of the fixture will determine the proper size of secondary wire.
This chart provides recommended distance of the secondary
circuit using #12 AWG based upon the loads shown. Figures
reflect a conservative voltage drop of 5% to the start of
each fixture.
16 | TOKISTAR LIGHTING
3 Watt/X3
Maximum Lengths
Load/Watts
Length
60
120
180
240
300
360
420
480
120’ (36.5 M)
60’ (18.2 M)
36’ (11 M)
30’ (9.1 M)
24’ (7.3 M)
20’ (6 M)
17.5’ (5.3 M)
15’ (4.5 M)
11’ (3.36 M)
14’ (4.2 M)
18’ (5.6 M)
28’ (8.4 M)
80’ (24 M)
100’ (30 M)
133’ (40 M)
200’ (60 M)
Installation Guidelines
Basic System
Each Advantage socket is provided with four
mounting holes. For secure mounting, use two
screws in opposing holes.
3”, 4” and 6” socket spacing
Seamless Light
Connectors can be offset so that socket
spacing is not interrupted at feed locations.
Advantage fixtures are flexible
enough to turn corners without the
use of special hardware, eliminating
any dark spots at corner locations.
2.4” socket spacing
AV-MC Mounting Channel
Attach the mounting channel securely in place with screws.
Insert one side of socket under the lip of the mounting
channel, then snap the socket in place.
The mounting channel is flexible in one direction and will
conform to a 24” radius with lamps facing into or away from
the bend.
Heat Consideration
In accordance with NEC/NFPA 70 Article 410.11,
combustible materials next to the fixtures must not be
subjected to temperatures in excess of 90º C (194º F).
In order to conform to this standard, fixtures need to
be installed according to the minimum space
requirements shown below.
Xenon lamps produce heat and may cause harm
if they come in direct contact with persons or
combustible materials. If fixtures are positioned
where these conditions can occur, Advantage
should always be specified with the appropriate
lens cover to prevent harm.
D
d1
d
d
d
d
d1
D
D
d2
d2
D
Basic System 2.4” O.C.
Basic System 2.4” O.C.
Watts
d
D
Watts
d
D
Watts
d1
d2
D
Watts
d1
d2
D
3
5
8.5
.75”
1”
1.5”
1.5”
2”
3”
3
5
8.5
1”
1.5”
2”
2”
3”
4”
3
5
8.5
1”
1.5”
2”
.75”
1”
1.5”
1.75”
2.5”
3.5”
3
5
8.5
.75”
.75”
.75”
.75”
1.25”
2”
1.5”
2”
2.75”
Basic System 2.4” O.C.
With Reflector 2.4” O.C.
TOKISTAR LIGHTING | 17
Specifications
2-1/8”
15/16”
In accordance with our policy
to continually improve products
based upon changes in technology,
Tokistar Lighting reserves the right
to vary product specifications
without prior notice.
Contacts
Xenon Sources
are plated copper and
recessed in socket
are 24 VAC lamps
15/16”
LED Module
consumes 0.72 Watts @ 24 VAC
available in 2400K and 3000K
Frosted Lens
diffuses light and casts a
smooth glow
Sockets
are fiber-reinforced PBT with
flammability rating UL 94-V0
Porcelain Base
Reflector
Conductors
is brushed aluminum
are #12 AWG stranded and plated copper
with PVC insulation rated 105° C
effectively dissipates heat
Printed Circuit Board
includes on-board bridge rectifier
for 24 VAC operation
Plastic Specifications
Advantage Mounting Channels and Lens Covers are extruded
polycarbonate with a flammability rating of UL 94-V0.
Series AVO tube guards have a flammability rating
of UL 94-V0 and conform to UL Standard 746C for
exposure to ultraviolet light and water absorption.
Safety Certification
Life Ratings
Advantage Lighting Systems are ETL Listed.
Ratings are based upon the manufacturer’s published
life data. Life of xenon sources is determined by
the industry standard Mean Time Before Failure
(MTBF) method, defined as the time when 50% of
lamps fail. With our LED source, life is defined as
the time when lumen output depreciates to 70% of
its initial value. Actual lifetime may vary based upon
environmental conditions.
18 | TOKISTAR LIGHTING
Catalog #: AV-3-X5
0°
30°
30°
100
60°
60°
90°
90°
120°
150° 180° 150°
120°
Catalog #: AV-3-X5-SR
0°
30°
30°
150
60°
60°
90°
90°
120°
150° 180° 150°
120°
30°
100
60°
60°
90°
90°
120°
150° 180° 150°
120°
60°
90°
90°
120°
150° 180° 150°
120°
60°
90°
90°
120°
150° 180° 150°
60°
90°
90°
Conversion Factors
Lamps:
3 Watt/12.5 Lumen X3, Multiply by 0.31
LED: Refer to LED Graph
Spacing:
4.0” O.C., Multiply by 0.75
6.0” O.C., Multiply by 0.50
Test Criteria:
Lamps: 5 Watt/40 Lumen; Spacing: 3” O.C. ; Fixture length: 48”
30°
100
60°
90°
90°
150° 180° 150°
6”
2.8
6”
1.8
6”
1.2
6”
0.9
Overhang
Surface reflectance: 50%
12”
18”
21
Conversion Factors
Lamps:
3 Watt/12.5 Lumen X3, Multiply by 0.31
LED: Refer to LED Graph
Spacing:
4.0” O.C., Multiply by 0.75
6.0” O.C., Multiply by 0.50
Catalog #: AVCC-WH-3-X5
60°
120°
5.0
42”
Conversion Factors
Light Source:
LED: 0.72 Watt 3000K LED/24 Lumen,
Multiply by 1.14
Spacing:
2.4” O.C., Multiply by 1.25
4.0” O.C., Multiply by 0.75
6.0” O.C., Multiply by 0.50
120°
0°
30°
10
6”
3”
27
6”
31
6”
24”
120°
Conversion Factors
Lamps:
3 Watt/12.5 Lumen X3, Multiply by 0.31
LED: Refer to LED Graph
Spacing:
4.0” O.C., Multiply by 0.75
6.0” O.C., Multiply by 0.50
31
6”
3”
Under Cabinet
Surface reflectance: 50%
Test Criteria:
Lamps: 5 Watt/40 Lumen; Spacing: 3” O.C. ; Fixture length: 48”
60°
150° 180° 150°
31
6”
Test Criteria:
Lamps: 5 Watt/40 Lumen; Spacing: 3” O.C. ; Fixture length: 48”
Conversion Factors
Lamps:
3 Watt/12.5 Lumen X3, Multiply by 0.31
8.5 Watt/70 Lumen X8, Multiply by 1.75
5 Watt/20 Lumen X5B, Multiply by 0.50
8.5 Watt/40 Lumen X8B, Multiply by 1
Spacing:
2.4” O.C., Multiply by 1.25
4.0” O.C., Multiply by 0.75
6.0” O.C., Multiply by 0.50
Catalog #: AVLC-WH-3-X5
30°
100
120°
115
6”
120°
0°
30°
4”
Test Criteria:
Lamps: 5 Watt/40 Lumen; Spacing: 3” O.C. ; Fixture length: 48”
30°
150
60°
Test Criteria:
Lamps: 5 Watt/40 Lumen
Spacing: 3” O.C.
Fixture length: 48”
Catalog #: AVO-3-X5
0°
30°
The sections below show typical
point-by-point footcandle values
for three typical applications.
Test Criteria:
0.72 Watt 2400K LED/21 Lumen; Spacing: 3” O.C. ; Fixture length: 48”
30°
100
60°
Footcandle Summary
Catalog #: AV-3-LWW
0°
30°
Test Criteria:
Lamps: 5 Watt/40 Lumen; Spacing: 3” O.C. ; Fixture length: 48”
Conversion Factors
Lamps:
3 Watt/12.5 Lumen X3, Multiply by 0.31
8.5 Watt/70 Lumen X8, Multiply by 1.75
5 Watt/20 Lumen X5B, Multiply by 0.50
8.5 Watt/40 Lumen X8B, Multiply by 1
Spacing:
2.4” O.C., Multiply by 1.25
4.0” O.C., Multiply by 0.75
6.0” O.C., Multiply by 0.50
Photometrics
Catalog #: AV-3-X5-AR
0°
30°
Test Criteria:
Lamps: 5 Watt/40 Lumen; Spacing: 3” O.C. ; Fixture length: 48”
Conversion Factors
Lamps:
3 Watt/12.5 Lumen X3, Multiply by 0.31
8.5 Watt/70 Lumen X8, Multiply by 1.75
5 Watt/20 Lumen X5B, Multiply by 0.50
8.5 Watt/40 Lumen X8B, Multiply by 1
Spacing:
2.4” O.C., Multiply by 1.25
4.0” O.C., Multiply by 0.75
6.0” O.C., Multiply by 0.50
6”
10
33”
6”
6”
15
25
44
6”
6”
75
12”
3”
100
71
74
112
Cove
1.5”
3”
3”
4”
Surface reflectance: 80%
Photometrics by Tokyo Metropolitan Industrial
Technology Research Institute (Tokyo, Japan).
Testing conducted in accordance with current
IES published procedures.
TOKISTAR LIGHTING | 19
Hotels
Showcase
Theatres
Signs and
Displays
Advantage
Point of Purchase
TOKISTAR® LIGHTING INC.
1015 E. Discovery Lane • Anaheim, CA 92801
Tel: 714.772.7005 • Fax: 714.772.7014 • Toll free in USA: 877.340.7633
Email: info@tokistar.com • Website: w w w.tokistar.com
© 2011 TOKISTAR LIGHTING INC. / V1.0
Entertainment