1x4 FL
LUCEN2X2
TM
LED
Surface Mount
TM
Side View
Project Name
Date
4-3/4”
Catalog Number
4-3/4”
Type
13-1/2"
49-1/2" die-formed white painted
CONSTRUCTION Prepainted formed 22 gauge cold rolled steel housing. Highly reflective
1x1 FL
Patent No: D671,258
PowerDensity
Lucen 1x4 Surface Mount
Shown as 2x2
MADE
2x2
LED
IN USA
reflector. Wiring access available on both sides and top of housing. Housing designed to maintain optimal temperature of LED diodes and driver.
OPTICS Single piece extruded diffuse lens with convex wings and articulated center spine creating a fully luminous
housing with optimal glare control. High reflective white reflectors maintain uniform lens brightness.
TM
ELECTRICAL
120 to 277 volt input and 36V output. 0-10 volt dimming standard. Must specify 1D in circuiting
Lucen
1x1 Electronic,
Surface Mount
for dimming.
Side View
LED All luminaire configurations tested in accordance with IES LM-79. Diodes tested in accordance with IES LM-80.
R9≥20, 27K is CRI≥90, 30K, 35K,4-3/4”
and 40K is CRI≥82. Minimum lifetime greater than 60,000 hours.
4-3/4”
MOUNTING LucenTM is designed to install on inaccessible ceiling. Specify S in the mounting section of the part
number. Consult factory for detailed installation instructions.
FINISH Prepainted white polyester polymer finish on exposed trim. Optional Paint After Fabrication available if
13-1/2"
specified. 13-1/2"
WARRANTY LucenTM LED offered with a 5-year limited warranty. Covers LED, driver and fixture.
LABELS UL and cUL Listed, LO, MO, and HO lumen packages are IC Rated. Pre-painted fixtures are to be used in dry
locations only. For damp location, must specify Paint After Fabrication (PAF) in the Options section of the Luminaire
Specification
Lucen 2x2 Surface Mount
TM
LFL
Convertible
LED
LED
Convertible
Side View
LFL
4-3/4”
(120.7mm)
4-3/4”
(120.7mm)
YEAR
WARRANTY
Shielding Options
Satine Lens (A)
YEAR
WARRANTY
LFL
Convertible
LED
2x4
LED
LED
Convertible
LFL
TM
Side View
White Trim (W)
LU22_- 1x4
LED
4-3/4”
(120.7mm)
Silver Trim (S)
____COLOR / LUMENS
LU22A- LucenT M
2x2 Recessed,
Satine Lens
LU22W- LucenT M
2x2 Recessed,
Satine Lens with
1x1
White Trim
LU22S- LucenT M 2x2
Recessed, Satine
Lens with Silver Trim
25-1/2" (647.7mm)
Lucen 2x4 Surface Mount
L U M I N A I R E S P E C I F I C AT I O N
HOUSING
25-1/2" (647.7mm)
Sample Catalog #: LU22A-35LO-S-120-1C-W
49-1/2" (1257.3mm)
25-1/2" (647.7mm)
S-
___-
Lucen 1x4 Surface Mount
MOUNTING
VOLTAGE
TM
Surface Mount
S- Surface Mount box
13-1/2" (342.9mm)
4-3/4”
120 V
120(120.7mm)
277- 277 V
347- 347 V
UNV- UNV
(120-277)
Lucen 1x1 Surface Mount
LED
4-3/4”
(120.7mm)
TM
30K Color Temperature Lumen Options
30LO- 30K, 2,203 lumens (23.1 watts)
30MO- 30K, 3,395 lumens (35.9 watts)
30HO- 30K, 4,292 lumens (48.9 watts)
35K Color Temperature Lumen Options
13-1/2" (342.9mm)
35LO- 35K, 2,271 lumens (23.1 watts)
35MO- 35K, 3,499 lumens (35.9 watts)
35HO- 35K, 4,321 lumens (48.9 watts)
40K Color Temperature Lumen Options
40LO- 40K, 2,324 lumens (23.1 watts)
40MO- 40K, 3,580 lumens (35.9 watts)
40HO- 40K, 4,421 lumens (48.9 watts)
__-
__-
___
CIRCUITING
FINISH
OPTIONS
Side View
1C1D1B1E-
4-3/4”
W- Matte (120.7mm)
Single Circuit1
White
Single Circuit Dimming1
49-1/2"
Single Circuit
with(1257.3mm)
Battery Pack1
Single Circuit with
Emergency Circuit1
Side View
4-3/4”
(120.7mm)
13-1/2" (342.9mm)
GLR- Internal Fast-Blow Fuse
AM- Antimicrobial Paint
4-3/4”
DSMDaylight Sensor Master
(120.7mm)
(sensor included)1 ,2
DSS- Daylight Sensor Satellite
(sensor not included)1, 2
Custom Output
CL______- Specify color temp. and desired lumens. (i.e. CL353000)
CW____- Specify color temp. and desired wattage. (i.e. CW4040)
(Specify lumens/watts between standard offering listed above.
Lumens are specified per color temp.)
Some Lucen configurations will not accommodate all options. Consult factory. 2See back page for ordering information. Requires 0-10 volt dimming.
1
®
Pinnacle Architectural Lighting
Phone 303.322.5570
12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Fax 303.322.5568 www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting®
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
Plunger
PHOTOMETRY
800
Door Frame
1228
1498
600
921
1124
400
614
748
200
307
375
Test #: ILT85419
Part #: LU22A-35LO
Lumens per watt: 98
Total Delivered Lumens: 2271
Test #: ILT85420
LU22A-35MO
Lumens per watt: 97
Total Delivered Lumens: 3499
Part #:
Lamps
Pull off
ballast cover
Lamps
LUCEN 2x2 LED
#8-32 Screw
Test #: ILT85421
Part #: LU22A-35HO
Lumens per watt: 88
Total Delivered Lumens: 4321
Ballast
Ballast Cover
INTEGRAL DAYLIGHT SENSOR
APPLICATION: Daylight sensor is a turn key solution for lighting control. Integral sensor is wired to the 0-10
volt driver at the factory. No additional wiring is required by the contractor.
DAYLIGHT SENSOR: Daylight sensor dims lights based on electric light and presence of daylight. Sensor
can control up to 20 drivers. Sensor is factory calibrated to 45 footcandles (fc), adjustable by 1/3 to 3 times the
default setting by rotating the aperture.
ORDERING INFORMATION: Specify “DSM” or “DSS” in the Options section of the part number when ordering Integral Daylight Sensor. Daylight Sensor Master (DSM) includes the fixture with sensor and driver. Controls
DSS units. Daylight Sensor Satellite (DSS) includes the fixture with a sensor compatible driver only. Must be
used in conjunction with a DSM unit. (0-10v) dimming must be utilized.
(Sample Catalog #: LU22A-35HO-G1-120-1D-W-DSM)
LED MAINTENANCE
Plunger
Door Frame
#8-32 Screw
Pull driver
cover out
OPENING THE LENS: Push lens up to locate plungers. Plungers are above
the lens on the inside of the fixture. Depress both plunger heads with fingers
and simultaneously pull door frame down.
Plunger
Driver Cover
Pinnacle Architectural Lighting
Phone 303.322.5570
12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Fax 303.322.5568 www.pinnacle-ltg.com
®
© 2015 Pinnacle Architectural Lighting®
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.