Innolume GmbH Konrad-Adenauer-Allee 11, 44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com LD-10XX-BA-15W High Power Diode Laser on open heatsink Features: • 12W output power at 1064nm • Available wavelength range 1000-1130nm • Proprietary mirror coating technology enabling high reliability • Reliable Au/Sn bonding of chip to C-mount open heatsink • For QCW operation TO-can packaging is possible • RoHS compliance SPECIFICATIONS heatsink temperature 25°C Test conditions: Parameters Symb. Min. Operating output power Pout 15 QCW output power (200µs pulse width, 1% duty cycle) Pqcw 35 λ 1030 Range of available wavelength Typ. Max. W W 1064 Mean wavelength tolerance Spectral width @ -3dB level at Pout Δλ Wavelength temperature tunability Δλ/ΔT Unit 0.3 1130 nm 5 nm 4 8 nm 0.4 0.45 nm/°C Threshold current Ith 0.9 1.3 A Operating current at Pout Iop 18 20 A Forward voltage at Pout Vf 1.5 1.7 V Divergence parallel to p-n junction (FWHM) Θǁ 4 8 11 deg. Divergence perpendicular to p-n junction (FWHM) Θ┴ 31 33 35 deg. 250 × 1 Aperture size µm × µm TYPICAL PERFORMANCE for reference only* CW operation, heatsink temperature 25°C Test conditions: Light-Current-Voltage Characteristics Spectral Characteristics 2 5.0E-07 1.8 4.5E-07 16 1.6 4.0E-07 14 1.4 3.5E-07 12 1.2 10 1 20 20 A 15 A 2A Intensity, a.u. Output Power, W Voltage Forward Voltage, V Pow er 18 3.0E-07 2.5E-07 8 0.8 6 0.6 4 0.4 2 0.2 5.0E-08 0 0 0.0E+00 0 4 8 12 16 Forward Current, A 20 2.0E-07 1.5E-07 1.0E-07 24 1055 CW Slow Axis Far Field 1060 1065 1070 Wavelength, nm 1075 1080 CW Fast Axis Far Field 20A, FWHM 33.2 deg. 15A, FWHM 7.3 deg. 15A, FWHM 32.9 deg. 5A, FWHM 6.2 deg. 5A, FWHM 33 deg. Normalized Intensity Normalized Intensity 20A, FWHM 10.1 deg. -20 -15 -10 -5 0 5 Angle, degree 10 15 20 -80 -60 -40 -20 0 20 Angle, degree 40 60 80 * Performance is given for the 1064nm device. Similar performance is expected for the other wavelengths in the 1000-1130nm range. LD-10XX-BA-15W 20 May 2016 Page 1 of 2 Innolume GmbH Konrad-Adenauer-Allee 11, 44263 Dortmund/Germany Phone: +49 231 47730 200; Web: www.innolume.com ABSOLUTE MAXIMUM RATINGS Parameters Min. Max. Unit V Laser Diode reverse voltage - 2 Laser Diode CW forward current - Iop+4 A 250 (5sec.) °C above dew point 60 °C -40 85 °C Lead soldering temperature Operating temperature range Storage temperature range DIMENSIONS (in mm) SAFETY AND OPERATING INSTRUCTIONS The laser light emitted from this Device is invisible and will harmful to the human eye. Avoid looking directly into the fiber output or into the collimated beam along its optical axis when the device is in operation. Proper laser safety eyewear must be worn during operation. Absolute Maximum Ratings may be applied to the Device for short period of time only. Exposure to maximum ratings for extended period of time or exposure above one or more max ratings may cause damage or affect the reliability of the Device. Operating the product outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the Device must be employed such that the maximum peak optical power cannot be exceeded. A proper heatsink for the Device on thermal radiator is required, sufficient heat dissipation and thermal conductance to the heatsink must be ensured. The Device is an Open-Heatsink Diode Laser; it may be operated in cleanroom atmosphere or dust-protected housing only. Operating temperature and relative humidity must be controlled to avoid water condensation on the laser facets. Any contamination or contact of the laser facet must be avoided. ESD PROTECTION – Electrostatic discharge is the primary cause of unexpected product failure. Take extreme precaution to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling the product. Example of Part Number Identification LD-1064-BA-12W -> 12W output power at mean wavelength 1064nm NOTE: Innolume product specifications are subject to change without notice LD-10XX-BA-15W 20 May 2016 Page 2 of 2