Revised and Corrected • September 1, 2009
Catalog No. F-62
Cabinets • Racks & Reels • Fire Hose •
Nozzles • Adapters • Standpipe Brass •
Testing Equipment • Specialties • Accessories
18436 Bandilier Circle • Fountain Valley, California 92708
Toll Free 888.773.3473 • Fax Toll Free 888.713.3473
Internet: www.gmr-fire.com
Introduction
Corporate offices and
distribution center
Fountain Valley, California
GMR Fire Protection is a dynamic, energetic company established
in 1990 to serve the fire equipment needs of the construction
industry. GMR cabinets, hose racks, and related products can be
found in office buildings, hotels, warehouses, hospitals, oil
refineries, and many other facilities around the world.
The fire protection industry has seen many changes in recent years,
and we have kept pace with those changes. Architects, engineers,
distributors, contractors, and building owners know they can depend
on us for:
• High quality products manufactured in modern, automated
plants
• Short, dependable lead times
• Compliance with recognized industry standards including
Underwriters Laboratories (UL) and Factory Mutual (FM)
• Knowledgeable personnel with years of fire protection
expertise
• Flexibility in responding to customer needs
We hope you find this catalog a useful tool for specifying or
purchasing interior and industrial fire products. If you need
application assistance, we invite you to contact one of our product
specialists...help is just a phone call, fax, or mouse click away.
i
Index
Catalog No. F-62
Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 1 thru 11
Cabinet Selection Guide . . . . .
Fire Hose Cabinets . . . . . . . . .
Fire Extinguisher Cabinets . . .
Hose Valve Cabinets . . . . . . .
Outdoor Cabinets . . . . . . . . . .
Misc. Cabinets & Accessories
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
... 1
2–3
4–8
... 9
. . 10
. . 11
Hose & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 12 thru 27
Hose Rack Units . . . . . . . . . . . . . .
Hose Rack Options & Accessories
Hose Reels & Accessories . . . . . .
Misc. Hose Storage Devices . . . .
Fire Hose & Couplings . . . . . . . . .
Nozzles & Shutoffs . . . . . . . . . . . .
Hose Adapters . . . . . . . . . . . . . . .
..
.
..
..
..
..
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
....
....
14 –
....
19 –
21 –
24 –
12
13
17
18
20
23
27
Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 28 thru 32
Angle Hose Valves . . . . . . .
Hose Gate Valves . . . . . . .
Misc. Hose Valves . . . . . . .
Globe & Angle Valves . . . . .
Check Valves . . . . . . . . . . .
Ball Valves . . . . . . . . . . . . .
Misc. Valves & Accessories
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
28
29
30
31
31
31
32
Fire Department Connections . . . . . . . . . . . . . . . . . . . Pages 33 thru 39
Exposed Type w/ Clapper Inlets .
Exposed Type w/ Single Clapper
Exposed Type – Complete Units
Free Standing Type . . . . . . . . . .
Flush Type . . . . . . . . . . . . . . . . .
Pump Test Connections . . . . . . .
Wall Hydrants . . . . . . . . . . . . . . .
Roof Manifolds . . . . . . . . . . . . . .
Accessories . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ii
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
33 –
....
....
....
....
....
....
....
....
34
34
35
35
36
37
37
38
39
Index
Sprinkler Accessories & Testing Equipment . . . . . . . Pages 40 thru 44
Sprinkler Accessories . . . . . . . .
Signs . . . . . . . . . . . . . . . . . . . . .
Testing Equipment . . . . . . . . . .
Fire Alarm Bells & Accessories
Flow & Supervisory Switches . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
....
....
41 –
....
....
40
41
43
43
44
Specialties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 45 thru 57
Station Monitors . . . . . . .
Portable Monitors . . . . . .
Master Stream Nozzles .
Monitor Accessories . . . .
Fire Hydrant Accessories
Hose Houses . . . . . . . . .
Hydrant Houses . . . . . . .
Roof House . . . . . . . . . .
Carts & Trailers . . . . . . .
Tools . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
45 –
....
....
....
....
....
....
....
....
55 –
46
47
48
49
50
51
52
53
54
57
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages A1 thru A15
Important Notice: Contact GMR for current listings and approvals. Dimensions are subject to
manufacturer’s tolerance and may change without notice. We assume no responsibility for use of
obsolete or invalid data.
GMR Fire Protection
18436 Bandilier Circle • Fountain Valley, CA 92708
Toll Free 888.773.3473 • Local & International 714.968.0105
Fax Toll Free 888.713.3473 • Local & International Fax 714.968.0159
Internet: www.gmr-fire.com
© 2006 – 2009 by GMR International Equipment Corporation. All rights reserved. This publication
may not be reproduced either in part or in whole without the express written permission of the
copyright holder.
iii
Cabinet Selection Guide
Construction Features
Variations & Accessories
Our cabinets are built using high quality raw
materials and skilled workmanship to provide
lasting durability. Precision manufacturing
ensures dimensional stability and superior fit
and finish.
Numerous cabinet variations and accessories
are available, including:
•
Special paint finishes
•
Plaques or nameplates
Box: 22 gauge cold rolled steel with reinforced
corners. Heavier gauges by special order.
•
Hose holders
•
Weatherproofing
Door & Trim: 20 gauge door and 18 gauge trim
with full length continuous steel hinge with
brass pin. Constructed of cold rolled steel,
formed, mitered, welded, and ground smooth.
•
Ventilation louvers
•
Duplex construction
•
Alarm switches
Finish: Powder coated with an electrostatically
applied, thermally fused white polyester finish.
•
Special locks
Optional Materials
Fire Rated Option
Provides cabinet manufactured in accordance
with Warnock Hersey certified designs and
labeled for 1 and 2 hour combustible and noncombustible walls. Box has double wall
construction, lined with fire resistant material.
Available on most cabinets.
Stainless Steel: Constructed same as steel
using 304 stainless steel with #4 brushed finish.
To specify, add prefix SS- to cabinet figure
number.
Aluminum: Extruded door and trim with clear
anodized finish to prevent oxidation and
corrosion. To specify, add prefix AL- to cabinet
figure number.
Custom Built Cabinets
We have the ability to design and fabricate
cabinets to meet your special requirements.
Cabinets can be built in both standard and nonstandard sizes, with any number of custom
features including extra heavy gauge material,
equipment brackets, special doors, etc. etc. etc.
Door Styles
Style
Suffix
Full Clear .06" Acrylic
Full Wire Glass
Break Glass w/ Safety Lock
FG
FW
BL
Horizontal Duo Panel
Vertical Duo Panel
Solid Panel
DP
DV
SP
Please provide drawings and/or specifications.
All of the above except break glass (-BL) are
furnished with a pull handle and self-adjusting
friction catch. Break glass doors are furnished
with a keyed-alike cylinder lock with break-off
tab. All door styles except horizontal duo panel
(-DP) are reversible and may be installed with
hinge to either left hand or right hand side.
1
Fire Hose Cabinets
Provides storage for a 1½” or 2½” x 1½” hose rack unit •
22 gauge steel box • 20 gauge door with continuous hinge
and brass pin • 18 gauge trim • White polyester powder
coat finish inside & out
Optional Materials: Stainless steel or aluminum door &
trim.
Fire Rated Option: Provides cabinet manufactured in
accordance with Warnock Hersey certified designs and
labeled for 1 and 2 hour combustible and non-combustible
walls. Box has double wall construction, lined with fire
resistant material.
Cabinet Capacities
Series
Hose Rack
Unit
Fire Extg.
2½” Hose
Valve
14100
14200
14300
50' or 75'
100'
100'
—
—
—
—
—
U
14400
14500
14600
50' or 75'
100'
100'
U
U
U
—
—
U
To Order:
1.
Refer to cabinet capacity table above to
select cabinet series.
Select cabinet by Fig. No.
Select door style by suffix (see Cabinet
Selection Guide on page 1).
Select optional door & trim material and/or
fire rated option, if required.
Order cabinet contents separately.
2.
3.
4.
5.
Note: The 14100, 14200, and 14300 series cabinets will
accommodate a 5 lb. dry chemical fire extinguisher when
required.
2
Fire Hose Cabinets
Box i.d.
Fig. No.
Frame o.d.
Wall Opening
Knockouts
Trim Style
A
B
C
E
F
W
H
D
J
G
J
G
14101
14102
14103
14104
14106
Recessed
Trimless
Semi-Rec 1¼
Semi-Rec 2½
Surface
24"
24"
24"
24"
27d”
30"
30"
30"
30"
33d”
8"
8"
8"
8"
8½”
27d”
23¾”
27d”
27d”
—
33d”
29¾”
33d”
33d”
—
25"
24½”
25"
25"
—
31"
30½”
31"
31"
—
8"
8½”
6¾”
5½”
—
4"
4"
4"
4"
—
4"
4"
4"
4"
—
2½”
4"
2½”
2½”
—
4"
4"
4"
4"
—
14201
14202
14203
14204
14206
Recessed
Trimless
Semi-Rec 1¼
Semi-Rec 2½
Surface
24"
24"
24"
24"
27d”
34¾”
34¾”
34¾”
34¾”
38c”
8"
8"
8"
8"
8½”
27d”
23¾”
27d”
27d”
—
38c”
34½”
38c”
38c”
—
25"
24½”
25"
25"
—
36"
35¼”
36"
36"
—
8"
8½”
6¾”
5½”
—
4"
4"
4"
4"
—
4"
4"
4"
4"
—
2½”
4"
2½”
2½”
—
4"
4"
4"
4"
—
14301
14302
14303
14304
14306
Recessed
Trimless
Semi-Rec 1¼
Semi-Rec 2½
Surface
24"
24"
24"
24"
27d”
38¾”
38¾”
38¾”
38¾”
42c”
8"
8"
8"
8"
8½”
27d”
23¾”
27d”
27d”
—
42c”
38½”
42c”
42c”
—
25"
24½”
25"
25"
—
40"
39¼”
40"
40"
—
8"
8½”
6¾”
5½”
—
4"
4"
4"
4"
—
4"
4"
4"
4"
—
2½”
4"
2½”
2½”
—
4"
4"
4"
4"
—
14401
14402
14403
14404
14406
Recessed
Trimless
Semi-Rec 1¼
Semi-Rec 2½
Surface
30"
30"
30"
30"
33d”
30"
30"
30"
30"
33d”
8"
8"
8"
8"
8½”
33d”
29¾”
33d”
33d”
—
33d”
29¾”
33d”
33d”
—
31"
30½”
31"
31"
—
31"
30½”
31"
31"
—
8"
8½”
6¾”
5½”
—
4"
4"
4"
4"
—
4"
4"
4"
4"
—
2½”
4"
2½”
2½”
—
4"
4"
4"
4"
—
14501
14502
14503
14504
14506
Recessed
Trimless
Semi-Rec 1¼
Semi-Rec 2½
Surface
32¾”
32¾”
32¾”
32¾”
36c”
34¾”
34¾”
34¾”
34¾”
38c”
8"
8"
8"
8"
8½”
36c”
32½”
36c”
36c”
—
38c”
34½”
38c”
38c”
—
34"
33¼”
34"
34"
—
36"
35¼”
36"
36"
—
8"
8½”
6¾”
5½”
—
4"
4"
4"
4"
—
4"
4"
4"
4"
—
2½”
4"
2½”
2½”
—
4"
4"
4"
4"
—
14601
14602
14603
14604
14606
Recessed
Trimless
Semi-Rec 1¼
Semi-Rec 2½
Surface
32¾”
32¾”
32¾”
32¾”
36c”
38¾”
38¾”
38¾”
38¾”
42c”
8"
8"
8"
8"
8½”
36c”
32½”
36c”
36c”
—
42c”
38½”
42c”
42c”
—
34"
33¼”
34"
34"
—
40"
39¼”
40"
40"
—
8"
8½”
6¾”
5½”
—
4"
4"
4"
4"
—
4"
4"
4"
4"
—
2½”
4"
2½”
2½”
—
4"
4"
4"
4"
—
NOTES:
1.
2.
3.
4.
5.
6" deep box available on 14100, 14200, and 14400 series.
For aluminum cabinets with 2½” semi-recessed trim, add e” to wall opening depth.
Cabinets with trim projection of 2½” or less comply with American with Disabilities Act (ADA) of 1990 requirements.
Contact GMR for suggested wall opening measurements for fire rated cabinets.
Knockouts are not provided on fire rated cabinets. The installer is responsible for the location and size of the cut-out
required for supply piping into cabinet. Installation instructions are provided and must be followed exactly to maintain
the cabinet’s fire rating.
3
Fire Extinguisher Cabinets
Architectural Style
Provides storage for one or two hand portable fire
extinguishers • 22 gauge steel box • 20 gauge door with
continuous hinge and brass pin • 18 gauge trim • White
polyester powder coat finish inside & out.
Optional Materials: Stainless steel or aluminum door & trim.
Fire Rated Option: Provides cabinet manufactured in
accordance with Warnock Hersey certified designs and
labeled for 1 and 2 hour combustible and non-combustible
walls. Box has double wall construction, lined with fire
resistant material.
Cabinet Capacities
Series
For Use With (Max. Extinguisher Size)
13130
2½ or 5 lb. Dry Chemical Fire Extinguisher
13200
10 lb. Dry Chemical Fire Extinguisher
13210
20 lb. Dry Chemical, 10 lb. CO2, or 2½ Gal.
Pressurized Water Fire Extinguisher
13220
20 lb. Dry Chemical, 15 lb. CO2, or 2½ Gal.
Pressurized Water Fire Extinguisher
13230
Two (2) 20 lb. Dry Chemical, 10 lb. CO2, or 2½ Gal.
Pressurized Water Fire Extinguishers
To Order:
1.
2.
3.
4.
5.
Refer to cabinet capacity table above to select
cabinet series.
Select cabinet by Fig. No.
Select door style by suffix (see Cabinet Selection
Guide on page 1).
Select optional door & trim material and/or fire
rated option, if required.
Fire extinguishers are purchased separately.
4
Fire Extinguisher Cabinets
Box i.d.
Fig. No.
Frame o.d.
Wall Opening
Trim Style
A
B
C
E
F
W
H
D
13131
13132
13133
13134*
13136
Recessed
Trimless
Semi-Rec 1½
Semi-Rec 2½
Surface
9"
9"
9"
9"
12d”
18"
18"
18"
18"
21d”
5½”
5½”
5½”
5½”
6”
12d”
9¼”
12d”
12d”
—
21d”
18¼”
21d”
21d”
—
10"
10"
10"
10"
—
19"
19"
19"
19"
—
5½”
5¾”
4"
3c”
—
13201
13202
13203
13204*
13205*
13206
Recessed
Trimless
Semi-Rec 1½
Semi-Rec 3
Semi-Rec 4½
Surface
10½”
10½”
10½”
10½”
10½”
13f”
24"
24"
24"
24"
24"
27d”
6"
6"
6"
6"
6"
6½”
13f”
10¾”
13f”
13f"
13f”
—
27d”
24¼”
27d”
27d”
27d”
—
11½”
11"
11½”
11½”
11½”
—
25"
24½”
25"
25"
25"
—
6"
6¼”
4½”
3e”
1e”
—
13211
13212
13213
13214*
13215*
13216
Recessed
Trimless
Semi-Rec 1¼
Semi-Rec 2½
Semi-Rec 4½
Surface
12"
12"
12"
12"
12"
15d”
27"
27"
27"
27"
27"
30d”
7¾”
7¾”
7¾”
7¾”
7¾”
8½”
15d”
12¼”
15d”
15d”
15d”
—
30d”
27¼”
30d”
30d”
30d”
—
13"
12½”
13"
13"
13"
—
28"
27½”
28"
28"
28"
—
7f”
8¼”
6¾”
5½”
3½”
—
13221
13223
13224*
13225*
13226
Recessed
Semi-Rec 1¼
Semi-Rec 2½
Semi-Rec 4½
Surface
16"
16"
16"
16"
19d”
32"
32"
32"
32"
35d”
7¾”
7¾”
7¾”
7¾”
8½”
19d”
19d”
19d”
19d”
—
35d”
35d”
35d”
35d”
—
17"
17"
17"
17"
—
33"
33"
33"
33"
—
7f”
6¾”
5½”
3½”
—
13231
13233
13234*
13235*
13236
Recessed
Semi-Rec 1¼
Semi-Rec 2½
Semi-Rec 4½
Surface
20"
20"
20"
20"
23d”
27"
27"
27"
27"
30d”
7¾”
7¾”
7¾”
7¾”
8½”
23d”
23d”
23d”
23d”
—
30d”
30d”
30d”
30d”
—
21"
21"
21"
21"
—
28"
28"
28"
28"
—
7f”
6¾”
5½”
3½”
—
NOTES:
1.
2.
3.
For cabinets indicated by an asterisk (*), add e” to “D” dimension when furnished with an aluminum door & trim.
Cabinets with trim projection of 2½” or less comply with Americans with Disabilities Act (ADA) of 1990 requirements.
Contact GMR for suggested wall opening measurements for fire rated cabinets.
5
Fire Extinguisher Cabinets
Canopy Style
Provides storage for one or two portable fire extinguishers •
Bubble-type canopy increases visibility of cabinet for quick
identification of fire extinguisher • 22 gauge steel box • 20 gauge
door & trim with continuous hinge and brass pin • Vacuum-formed
acrylic canopy • White polyester powder coat finish inside & out
Optional Materials: Stainless steel or aluminum door & trim.
Fire Rated Option: Provides cabinet manufactured in accordance
with Warnock Hersey certified designs and labeled for 1 and 2
hour combustible and non-combustible walls. Box has double wall
construction, lined with fire resistant material.
Cabinet Capacities
Series
For Use With (Max. Extinguisher Size)
13300
10 lb. Dry Chemical Fire Extinguisher
13310
20 lb. Dry Chemical Fire Extinguisher
13320
Two (2) 20 lb. Dry Chemical Fire Extinguishers
To Order:
1.
2.
3.
Select cabinet by Fig. No.
Select canopy color: Clear, red or bronze
Select optional material and/or fire rated option, if
required.
Fire extinguishers are purchased separately.
4.
Box i.d.
Fig. No.
13301
13303
13304
13306
Frame o.d.
Wall Opening
Trim Style
Recessed
Semi-Rec 1½
Semi-Rec 3
Surface
A
B
C
E
F
W
H
D
10½”
10½”
10½”
13f”
24"
24"
24"
27f”
4"
4"
4"
4e”
13f”
13f”
13"
—
27d”
27d”
26½”
—
11½”
11½”
11½”
—
25"
25"
25"
—
4"
2e”
1e”
—
(Continued on page 7)
6
Fire Extinguisher Cabinets
Box i.d.
Fig. No.
Frame o.d.
Wall Opening
Trim Style
A
B
C
E
F
W
H
D
13311
13313
13314
13316
Recessed
Semi-Rec 1¼
Semi-Rec 2½
Surface
14"
14"
14
17d”
30"
30"
30"
33d”
4"
4"
4"
4e”
17d”
17d”
17d”
—
33d”
33d”
33d”
—
15"
15"
15"
—
31"
31"
31"
—
4"
2f”
1e”
—
13321
13326
Recessed
Surface
28"
31d”
30"
33d”
4"
4e”
31d”
—
33d”
—
29"
—
31"
—
4"
—
NOTES:
1.
2.
Cabinets with trim projection of 2½” or less comply with Americans with Disabilities Act (ADA) of 1990 requirements.
Contact GMR for suggested wall opening measurements for fire-rated cabinets.
Corner Style
Provides storage for a single hand portable fire extinguisher •
Triangular shape allows cabinet to be mounted in corner locations
• Complies with Americans with Disabilities Act (ADA) of 1990 • 18
gauge steel box • 20 gauge door with continuous hinge with brass
pin • White polyester powder coat finish inside & out
Optional Materials: Stainless steel or aluminum construction.
To Order:
1.
2.
3.
4.
Select cabinet by Fig. No.
Select door style by suffix.
Select optional material by prefix, if required.
Fire extinguishers are purchased separately.
Dimensions
Fig. No.
Trim Style
For Use With (Max. Extinguisher Size)
W
H
D
13401
Surface
15¾”
18"
8c”
5 lb. Dry Chemical Fire Extinguisher
13402
Surface
15¾”
24"
8c”
10 lb. Dry Chemical Fire Extinguisher
7
Fire Extinguisher Cabinets
13000 Economy Series
Provides storage for portable fire extinguisher • Economical
means of protecting extinguisher while discouraging tampering or
theft • Surface mount construction is suitable for new construction
or remodeling • Heavy gauge steel with silver gray hammertone
finish • Breakable acrylic panel with retaining clip and padlock
hasp • Breaker bar with chain included
Optional Material: Aluminum construction with white or red
polyester finish.
Fig. No.
Trim Style
13001
13003
13005
Surface
Surface
Surface
W
H
D
For Use With (Max. Extinguisher Size)
8c”
9c”
10c”
18"
24"
28"
5½”
5½”
8¼”
2½ or 5 lb. Dry Chemical
10 lb. Dry Chemical or 5 lb. CO2
2½ Gal. Pressurized Water or 15 lb. CO2
13100 Economy Series
Provides storage for portable fire extinguisher • Economical
means of protecting extinguisher while discouraging tampering or
theft • Surface mount construction is suitable for new construction
or remodeling • Heavy gauge galvanized steel with white polyester
finish • Breakable acrylic panel with retaining clip and padlock
hasp • Breaker bar with chain included
Optional Material: Aluminum construction with white or red
polyester finish.
Fig. No.
Trim Style
13101
13102
13103
Surface
Surface
Surface
W
H
D
For Use With (Max. Extinguisher Size)
9c”
9½”
10½”
1913/16 "
25¾”
29¾”
6¼”
6¼”
8¼”
2½ or 5 lb. Dry Chemical
10 lb. Dry Chemical or 5 lb. CO2
2½ Gal. Pressurized Water or 15 lb. CO2
Note: Cabinets do not include fire extinguisher, which must be ordered separately.
8
Hose Valve Cabinets
Provides storage for a single 2½” fire hose valve • 15200
series is used with pressure reducing valves or in situations
where the authority having jurisdiction requires 12" spanner
clearance • 22 gauge steel box • 20 gauge door with
continuous hinge and brass pin • 18 gauge trim • White
polyester powder coat finish inside & out
Optional Materials: Stainless steel or aluminum door & trim.
Fire Rated Option: Provides cabinet manufactured in
accordance with Warnock Hersey certified designs and
labeled for 1 and 2 hour combustible and non-combustible
walls. Box has double wall construction, lined with fire
resistant material.
To Order:
1.
2.
Select cabinet by Fig. No.
Select door style by suffix (see Cabinet Selection
Guide on page 1).
Select optional door & trim material and/or fire
rated option, if required.
Order hose valve separately.
3.
4.
Box i.d.
Fig. No.
Frame o.d.
Wall Opening
Knockouts
Trim Style
A
B
C
E
F
W
H
D
J
G
J
G
15101
15102
15103
15104
15106
Recessed
Trimless
Semi-Rec 1¼
Semi-Rec 2½
Surface
18"
18"
18"
18"
21d”
18"
18"
18"
18"
21d”
8"
8"
8"
8"
8½”
21d”
17¾”
21d”
21d”
—
21d”
17¾”
21d”
21d”
—
19"
18½”
19"
19"
—
19"
18½”
19"
19"
—
8¼”
7¾”
6f”
5e”
—
4"
4"
4"
4"
—
9"
9"
9"
9"
—
2½”
4"
2½”
2½”
9"
9"
9"
9"
—
15201
15202
15203
15204
15206
Recessed
Trimless
Semi-Rec 1¼
Semi-Rec 2½
Surface
26"
26"
26"
26"
29d”
26"
26"
26"
26"
29d”
10"
10"
10"
10"
10½”
29d”
25¾”
29d”
29d”
—
29d”
25¾”
29d”
29d”
—
27"
26"½
27"
27"
—
27"
26½”
27"
27"
—
9¾”
10¼”
8f”
7e”
—
5"
5"
5"
5"
—
13"
13"
13"
13"
—
5"
5"
5"
5"
—
13"
13"
13"
13"
—
NOTES:
1.
2.
3.
4.
For aluminum cabinets with 2½” semi-recessed trim, add e” to wall opening depth.
Cabinets with trim projection of 2½” or less comply with American with Disabilities Act (ADA) of 1990 requirements.
Contact GMR for suggested wall opening measurements for fire rated cabinets.
Knockouts are not provided on fire rated cabinets. The installer is responsible for the location and size of the cut-out
required for supply piping into cabinet. Installation instructions are provided and must be followed exactly to maintain
the cabinet’s fire rating.
9
Outdoor Cabinets
Fiberglass Hose & Extinguisher Cabinets
Provides storage for hose rack unit and/or fire extinguisher • Free
standing design is suitable for docks and other areas where wall
mounting is not practical • Constructed of sturdy, high visibility
optic yellow fiberglass • Break glass style door with stainless steel
hinges (Fig. No. 14998) or full breakable glass panel (Fig. No.
19999) • Keyed alike cylinder lock • Also available in red or white
Overall Dimensions
Fig. No.
For Use With
14998
Hose Rack Unit & Fire Extinguisher
14999
Fire Extinguisher Only
W
H
D
32"
48"
8"
12e”
34"
9"
Plastic Fire Extinguisher Cabinets
Provides storage for a single hand portable fire extinguisher •
Non-metallic construction is especially suitable for outdoor
locations where corrosion is a problem • Vacuum-formed ABS
plastic construction with ultraviolet (UV) inhibitors • Non-metallic
hinges and door latch • Rubber gasket door seal • Bright red door
with pictogram or decal identifies cabinet and its contents
Overall Dimensions
Fig. No.
For Use With (Max. Extg. Size)
W
H
D
13120
10 lb. Dry Chemical or 5 lb. CO2
14"
21"
9½"
13121
30 lb. Dry Chemical or 20 lb. CO2
21”
32"
13"
10
Misc. Cabinets & Accessories
Fire Blanket Cabinets
Key Lock Box • Alarm Station Cover
Provides added security,
discourages tampering • Heavy
gauge steel construction • White
polyester powder coat finish • Single
strength breakable glass panel •
Padlock provision (padlock must be
ordered separately)
For smothering flames or for general
first aid use • Cabinet storage keeps
blanket clean and ready for use •
Blanket complies with NFPA 701
standard for flame retardant textiles
and films • 60" x 80" wool blend
blanket with flame retardant
treatment; will not support combustion • Heavy
gauge steel cabinet with red polyester powder
coat finish inside and out • Fig. No. 28206 has
roller bar and blanket with arm loop
Fig. No.
28204
28206
H
W
D
13"
68"
16"
6½”
4½”
4½”
Fig. No.
Description
HxWxD
16992
16993
Key Lock Box
Alarm Station Cover
6" x 4" x 2½”
6" x 6" x 2½”
Breaker Bar
Steel bar with chain
used with break glass
style cabinets
Fig. No.
78901 . . . . . . . . . . . . . . . . . . . . . . . . . . Breaker Bar
Padlock
For use on cabinets that have a lock
hasp • Keyed alike, two keys provided
Fire Axe Cabinet
Fig. No.
78111 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Padlock
Used to store fire axe,
discourages
tampering • Heavy
gauge steel
construction • Silver
gray hammertone
finish • Single strength breakable glass panel •
Padlock provision • Overall dimensions 42" x
16" x 4" (W x H x D) • Axe, brackets, and
padlock are ordered separately
Fire Axe Brackets
Used to store fire axe, may
be used with Fig. No.
16991 fire axe cabinet •
Heavy gauge steel • Red
polyester powder coat
finish
Fig. No.
16991 . . . . . . . . . . . . . . . . . . . . . . Fire Axe Cabinet
Fig. No.
69131 . . . . . . . . . . . . . . . . . . . . . . Fire Axe Brackets
11
Hose Rack Units
Provides a readily available and effective means of fire
control when installed on interior standpipe and hose
systems • Semi-automatic operation permits use by a
single individual
45100 Series 1½” Hose Rack Units
•
•
•
Fig. No. 48301 UL/FM angle valve
Fig. No. 45901 hose rack nipple
Fig. No. 45100-1 UL/FM semi-automatic hose
rack
Fig. No. 39501 FM approved rack hose with
brass couplings
Fig. No. 57104 UL/FM hose rack nozzle
•
•
45110 Series 2½” x 1½” Hose Rack Units
•
•
•
•
Fig. No. 48303 UL/FM angle valve
Fig. No. 45902 hose rack nipple
Fig. No. 43103 reducer
Fig. No. 45100-1 UL/FM semi-automatic hose
rack
Fig. No. 39501 FM approved rack hose with
brass couplings
Fig. No. 57104 UL/FM hose rack nozzle
•
•
To Order:
1.
2.
Select hose rack unit by Fig. No.
Select option(s) by suffix, if required (see
page 13).
Fig. No.
Valve
Hose
A
B
C
D
E
45101
45102
45103
1½”
1½”
1½”
50'
75'
100'
1½”
1½”
1½”
17d”
21d”
28"
19e”
19e”
19e”
17¾”
17¾”
17¾”
4¼”
4¼”
4¼”
45111
45112
45113
2½”
2½”
2½”
50'
75'
100'
2c”
2c”
2c”
19"
23"
30"
20d”
20d”
20d”
17¾”
17¾”
17¾”
4¼”
4¼”
4¼”
12
Options & Accessories
Hose Rack Unit Options
Hose Rack Nipples
To select option(s) required, add suffix to basic
hose rack unit Fig. No.
Supports hose rack from valve
and provides male hose thread
outlet for attachment of hose •
Cast brass • Hexagonal wrench
flats • Male NPT x male hose
thread outlet • Polished brass and/or chrome
plated finish optional
Option
Suffix
Fig. No. 57103 brass fog nozzle
Fig. No. 57106 “All Fog” brass nozzle
Fig. No. 57152 polycarbonate fog nozzle
B
E
L
Polished brass valve & trim, red rack
Rough brass valve, polished trim, red rack
Rough chrome valve & trim, red rack
Polished chrome valve, trim, and rack
Fig. No.
Size
45901 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1½”
45902 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2½”
PB
PT
RC
PC
UL labeled hose
U
Wall bracket mounting
Pipe clamp mounting (specify pipe size)
W
P
Wall Bracket
Used to support hose rack
independent of standpipe valve •
Welded steel with red enamel
finish
NOTE: When wall bracket mounting (option “W”) is
selected, hose units are furnished with F x M angle valve.
This option does not require the use of a hose rack nipple.
Fig. No.
45911 . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Bracket
Semi Automatic Hose Racks
Used with Fig. No.
39501 rack & reel
hose on interior
standpipe systems •
Semi-automatic operation • Heavy gauge
welded steel cover • Aluminum water retention
clip • Cadmium plated movable pins • Spring
clip nozzle bracket • Red polyester powder
finish • UL listed • FM approved • Polished
chrome finish optional • Maximum hose
capacity: 100'
Fig. No.
45100-1
45100-1R
Valve
Hose Size
1½”
2½”
1½”
1½”
Hose Rack Covers
Keeps rack free of dirt and
moisture • Nylon reinforced
PVC fabric • Bright red for easy
identification
13
Fig. No.
For Use With
53105
53106
50' or 75' Hose Rack Unit
100' Hose Rack Unit
Swinging Hose Reels
Standard Duty Reels
Provides storage for flat-folding fire hose • Reel
automatically swings to proper angle as hose is unreeled •
Drum storage eliminates kinking, prolongs hose life
•
Solid steel rims with rolled edges
•
18 gauge steel hubs
•
12 gauge steel frame and wall bracket
•
High strength injection molded drum
•
Red polyester powder coat finish
Hose Reel Options
Description
Suffix
Corrosion resistant finish
Pipe clamp mounting (specify pipe size)
CR
P
To Order:
1.
2.
3.
Select hose reel by Fig. No.
Select option(s) by suffix, if required.
Order hose, nozzles, and accessories
separately.
Hose Capacity
Fig. No.
45201
45202
45203
Hose Size
1½”
1½”
2½”
Rack & Reel
Single Jacket
Double Jacket
100'
150'
150'
50'
100'
100'
—
50'
50'
14
A
B
Overall
Depth
18"
24"
24"
23½”
29"
33½”
6¼”
6¼”
7f”
Swinging Hose Reels
Heavy Duty Reels
Provides storage for flat-folding fire hose • Reel
automatically swings to proper angle as hose is unreeled •
Drum storage eliminates kinking, prolongs hose life
•
½” o.d. tubular steel rims & frame
•
Heavy gauge steel spokes
•
18 gaueg steel hubs
•
Two-piece wall bracket
•
Heavy gauge steel drum
•
Red enamel finish
Hose Reel Options
Description
Suffix
Pipe clamp mounting (specify pipe size)
P
To Order:
1.
2.
3.
Select hose reel by Fig. No.
Select optional pipe clamp mounting, if required.
Order hose, nozzles, and accessories
separately.
Hose Capacity
Fig. No.
Hose Size
Rack & Reel
Single Jacket
Double Jacket
A
B
Overall
Depth
45204
45205
45206
1½”
1½”
1½”
75'
100'
150'
—
50'
100'
—
—
50'
16¼”
20e”
26"
24½”
28½”
34½”
7½”
7½”
7½”
45207
45208
45209
2½”
2½”
2½”
100'
150'
250'
—
50'
100'
—
—
50'
20e”
26"
26"
28½”
34½”
34½”
10"
10"
13½”
Note: This series of reels is no longer available effective October 1, 2007. This information is provided for
reference only.
15
Hose Reel Units • Accessories
Hose Reel Units
Water Retention Device
Provides a readily
available and effective
means of fire control
when installed on
interior standpipe and
hose systems • Reel
automatically swings to
proper angle as hose
is unreeled • Drum
storage eliminates
kinking, prolongs hose
life
Used with 45210 series
hose reel unit to provide
semi-automatic (oneman) operation • Cast
aluminum construction
with tension adjustment •
Specify rack & reel or single jacket hose
when ordering
Hose Reel Covers
Each complete unit includes:
•
•
•
•
•
Keeps reel free of dirt
and moisture • Nylon
reinforced PVC fabric
• Velcro fasteners •
Bright red for easy
identification
Swinging hose reel
F x M angle valve
Rack & reel hose
Brass hose couplings
Nozzle
To Order:
1.
2.
Fig. No.
Fig. No.
45299 . . . . . . . . . . Water Retention Device
Select hose reel unit by Fig. No.
Options and accessories are ordered
separately.
Reel
Valve
Hose
Length
45211
45212
45213
45201
1½”
1½”
50'
75'
100'
45214
45215
45216
45201
2½”
1½”
50'
75'
100'
45217
45218
45219
45203
2½”
2½”
50'
75'
100'
16
Fig. No.
For Use With
Reel Dia.
53108
53109
53110
53111
45201, 45204
45205
45202
45206
16 - 18"
21"
24"
26"
53118
53119
53120
53121
45207
45203
45208
45209
21"
24"
26"
26"
Continuous Flow Hose Reels
Provides immediate and continuous water flow. Commonly used
in special hazards fire protection systems.
•
•
•
•
•
•
•
•
•
Electrically welded steel frame
Heavy gauge steel drum with internal tie rod reinforcement
1" o.d. tubular steel rims
Heavy gauge steel spokes
Ductile iron swivel joint
Quick-release tension brake assembly
300 PSI rated working pressure
Universal mounting stand
Red polyester powder coat finish
Hose Reel Options
Description
Suffix
Aluminum construction
Hot dip galvanized finish
Stainless steel construction
AL
GV
SS
Brass swivel joint
Offset gear crank rewind
High stand (specify height)
BR
HC
HS
To Order:
1.
2.
3.
4.
Select hose reel by Fig. No.
Indicate inlet location, i.e. left hand or right hand
side. If location is not indicated, right hand inlet will
be supplied.
Indicate options required, if any.
Hose, nozzles, and accessories are ordered
separately.
Hose Capacity
Fig. No.
45301
45302
45303
45304
45306
Inlet NPT
1½"
1½"
1½"
1½”
1½”
¾”
1"
1½”
150'
200'
250'
—
—
100'
150'
200'
200'
300'
50'
75'
100'
100'
200'
A
B
C
D
E
F
G
H
28"
22"
28"
25"
28"
29½”
23½”
29½”
26½”
29½”
10"
25"
15"
20"
25"
11"
11"
11"
11"
11"
21½”
36½”
26½”
31½”
36½”
12"
12"
12"
12"
12"
17"
32"
22"
27"
32"
15½”
12½”
15½”
14"
15½”
NOTE: For reels with offset gear crank rewind, add 8" to the “F” dimension.
17
Misc. Hose Storage Devices
Hump Racks
Used for flat-folding fire hose storage,
especially in industrial facilities • Center
hump reduces weight at folds, prolonging
hose life • Heavy gauge spot welded steel
construction • Two piece wall bracket • Red
enamel finish • FM approved
Hose Capacity
Fig No.
Hose Size
Rack & Reel
Single Jacket
Double Jacket
A
B
C
46111
46112
1½”
1½”
100'
150'
50'
100'
—
50'
29¾”
33½”
20f”
27f”
4¼”
4¼”
46113
46114
2½”
2½”
150'
200'
100'
150'
50'
100'
33½”
39¾”
27f”
38f”
5e”
5e”
Hose Hanger
Saddle Type Hose Rack
Used to store hose in a
protected manner • Hanger
brackets are spaced for hose
length and installed in “I”
beam to prevent damage
from material handling
equipment • Hose is released
with a sharp tug on the nozzle
• Cast aluminum construction • Spring
loaded upper hanger • Stationary lower
hanger • Accommodates up to 100' of
1½” or 2½” hose
Provides an economical means of
storing all types of fire hose • 12
gauge welded steel construction •
Red enamel finish • 16" overall width •
10" overall height
Hose Size
Depth
Capacity
SJRL Hose
46401
46402
1½”
1½”
3½”
6¼”
50'
100'
46403
46404
2½”
2½”
4½”
9"
50'
100'
Fig. No.
Fig. No.
46101 . . . . . . . . . . . . . . . . . . . Hose Hanger
18
Fire Hose
Single Jacket
Nitrile Rubber Covered
For use with swinging hose reels,
hump racks, or outdoor equipment
houses • 100% polyester jacket •
Synthetic rubber lining • Neoprene
lining and/or polymer coating
optional • FM approved • UL label
optional on 1½” and 2½” sizes • 50',
75' or 100' length • Available with brass or
aluminum couplings
Used with swinging hose reels,
hump racks, or outdoor equipment
houses • One piece extruded
construction • 100% synthetic nitrile
rubber cover and lining • 100%
synthetic textile reinforcement • 50',
75' or 100' length • Available in red
or yellow, specify when ordering • Available
with brass or aluminum couplings
Fig. No.
Size
Proof Test
Fig. No.
Size
Proof Test
39101
39202
1½”
1½”
300 PSI
500 PSI
39401
39404
1½”
2½”
500 PSI
500 PSI
39103
39205
2½”
2½”
300 PSI
500 PSI
Double Jacket
Used with swinging hose reels, hump
racks, or outdoor equipment houses
• Second jacket provides additional
protection and increased safety
factor • 100% polyester jackets •
Synthetic rubber lining • Neoprene
lining and/or polymer coating
optional • FM approved (600 PSI
hose only) • UL label optional (600 PSI hose
only) • 50', 75' or 100' lengths • Available with
brass or aluminum couplings
Rack & Reel
Used with pin racks and swinging
hose reels • 100% polyester jacket •
Thermoplastic lining • 1½” size FM
approved • UL label optional on 1½”
size • 50, 75' or 100' length •
Available with brass or aluminum
couplings
Fig. No.
Size
Proof Test
39501
39502
1½”
2½”
500 PSI
500 PSI
Fire Hose Options
Polymer Coating: Protects hose
against abrasion, chemicals, heat, and
weathering. Available in red, yellow,
orange, blue, green, brown, tan, and
black.
Neoprene Lining: Improves ozone
and chemical resistance, flame
retardant.
19
Fig. No.
Size
Proof Test
40102
40202
1½”
1½”
600 PSI
800 PSI
40105
40205
2½”
2½”
600 PSI
800 PSI
Fire Hose • Couplings
Non-Collapsible Hose
Aluminum Hose Couplings
Used with continuous flow hose reels •
Rigid, non-collapsing construction allows
water flow at all times • Spirally wrapped
synthetic textile reinforcement • Synthetic
rubber cover • 4:1 safety factor • Cut
lengths to 200'
Used with all types of fire
hose • Attaches to hose with
an internally expanded brass
ring • Extruded aluminum
with hard coated anodized
finish • Machined thread and
gasket recesses • Rocker
lugs • Each set includes male and female
coupling, expansion rings, and gaskets
General Purpose: EPDM tube and cover •
4 ply reinforcement • Limited oil and
chemical resistance
Heavy Duty: NBR tube and cover • 4 ply
reinforcement • Oil and chemical resistant
Fig. No.
Size
Fig. No.
Size
Hose Type
1½”
1½”
1½”
Rack & Reel
Single Jacket
Double Jacket
2½”
2½”
Single Jacket
Double Jacket
Type
Max. WP
44141
44142
44151
44145
44154
41302
41303
¾”
¾”
General Purpose
Heavy Duty
200 PSI
250 PSI
41312
41313
1"
1"
General Purpose
Heavy Duty
200 PSI
250 PSI
41321
41323
1¼
1¼”
General Purpose
Heavy Duty
150 PSI
250 PSI
41331
41333
1½”
1½”
General Purpose
Heavy Duty
150 PSI
250 PSI
Long Shank Couplings
Used with noncollapsible hose •
Attaches to hose with
bands, clamps, or
ferrules • Cast brass • Long shank •
Hexagonal wrench flats
Brass Hose Couplings
Used with all types of fire hose •
Attaches to hose with an internally
expanded brass ring • Cast or forged
brass with satin finish • Machined
thread and gasket recesses • Pin
lugs standard • Rocker lugs optional • Each set
includes male and female coupling, expansion rings,
and gaskets
Fig. No.
Size
Hose Type
44101
44102
44111
1½”
1½”
1½”
Rack & Reel
Single Jacket
Double Jacket
44105
44114
2½”
2½”
Single Jacket
Double Jacket
20
Fig. No.
Size
Thread
LS7575
LS1010
¾”
1"
GHT or NPSH
NST or NPSH
LS1212
LS1515
1¼”
1½”
NPSH
NST or NPSH
Nozzles
Adjustable Brass Fog Nozzles
Adjustable “All Fog” Nozzle
For use on Class A & B fires •
Cast brass • Satin finish •
Female hose thread base •
Rubber bumper • Fog, straight
stream, and shutoff positions •
UL listed • FM approved
For use on Class A, B, and C
fires • Suitable for use in
electrical hazard areas, at
distances of 10' or more when
voltage levels are below
250,000 volts • Cast brass • Satin finish •
Female hose thread base • Rubber bumper •
Adjustable fog and shutoff positions, no straight
stream • UL listed • FM approved
Fig. No.
Size
GPM
57101
57103
57107
1"
1½”
2½”
28
60
165
Fig. No.
Size
GPM
57106
1½”
65
Hose Rack Nozzle
For use on Class A & B fires •
Cast brass • Satin finish •
Female hose thread base •
Fog, straight stream, and
shutoff positions • UL listed •
FM approved
Polycarbonate Fog Nozzles
Used on Class A & B fires •
Injection molded polycarbonate
• Female hose thread base •
Rubber bumper • Fog, straight
stream, and shutoff positions •
Fig. No. 57152 is ULC approved
Fig. No.
Size
GPM
57104
1½”
60
Heavy Duty Brass Fog Nozzle
For use on Class A & B fires •
Forged brass with knurled
barrel • Satin finish • Female
hose thread base • Large
rubber bumper • Fog, straight
stream, and shutoff positions • ULC listed
Fig. No.
Size
GPM
57150
57151
¾”
1"
22
22
57152
57153
1½”
1½"
75
150
57158
57159
57156
2"
2"
2½”
75
150
150
Petrochemical Fog Nozzle
Fig. No.
Size
GPM
57105
1½”
65
Used on Class A & B fires •
Glass filled polycarbonate •
Female hose thread base •
Rubber bumper • Color coded
“Refinery Blue” • Fog, straight
stream, and shutoff positions
21
Fig. No.
Size
GPM
57162
1½”
75
Nozzles
Polycarbonate “All Fog” Nozzle
Marine Fog Nozzle
Used on Class A, B, and C
fires • Suitable for use in
electrical hazard areas at a
distance of 10' or more when
voltage is lower than 250,000
volts • Injection molded
polycarbonate • Female hose thread base •
Rubber bumper • Adjustable fog and shutoff
positions • No straight stream • ULC listed
For use on Class A & B fires
• Compatible with all low
expansion foam concentrates
• Constant gallonage is
maintained through all stream
pattern adjustments •
Corrosion resistant brass
construction • Spinning teeth for improved fog
patterns • Pistol grip • Quarter turn shutoff •
Female hose thread base • Rubber bumper •
Fog, straight stream, and flush positions
Fig. No.
Size
GPM
57154
1½”
75
Fig. No.
Size
GPM
55195
1½”
95
Heavy Duty Composite Fog Nozzles
Used on Class A & B fires •
Fiberglass reinforced
composite material •
Resistant to corrosion, heat,
and impact • Black nozzle
contains a higher percentage
of fiberglass for added corrosion and heat
resistance • Brass internals • Oversized rubber
bumper • Female hose thread base • Fog,
straight stream, and shutoff positions
Fig. No.
Color
Size
GPM
57172
57182
Red
Black
1½”
1½”
95
95
Multiple Gallonage Nozzle
Used on Class A & B fires •
Selectable gallonage • Constant
gallonage is maintained through
all stream pattern adjustments •
Corrosion resistant brass
construction • Spinning teeth for
improved fog patterns • Pistol
grip • Quarter turn shutoff •
Female hose thread swivel
base • Rubber bumper • Fog,
straight stream, and flush positions • Flow
control ring • FM approved
Constant Gallonage Nozzles
For use on Class A & B fires •
Compatible with all low
expansion foam concentrates
• Constant gallonage is
maintained through all stream
pattern adjustments • Lightweight
hard anodized aluminum • Brass
and stainless steel internals • Pistol grip •
Quarter turn shutoff • Female hose thread base
• Rubber bumper • Fog, straight stream, and
flush positions
Fig. No.
Size
GPM
55095
55125
1½”
1½”
95
125
22
Fig. No.
Size
GPM
55106
1½”
30 – 60 – 95 – 125
Nozzles & Shutoffs
Shutoff Nozzle
Ball Shutoffs
Used on Class A fires or for
washdown • Produces a
long reaching straight
stream • Cast brass shutoff
body and nozzle tip •
Female hose thread base • Quick shutoff
handle • Rubber bumper • Overall length 9"
Used to provide quick shutoff of
water flow at nozzle base • Cast
brass • Female swivel base •
Male hose thread outlet • Quick
shutoff handle
Fig. No.
Size
Tip Dia.
57302
1½”
½”
Fig. No.
Inlet
Outlet
Waterway
57912
57914
1½”
2½”
1½”
1½”
1”
1d”
Pistol Grip Ball Shutoffs
Used to provide quick shutoff of
water flow at nozzle base • Pistol
grip for improved handling and
control • Cast brass • Female
swivel base • Male hose thread
outlet • Quick shutoff handle
Nozzle Tip
Tip only for Fig. No. 57302
nozzle • Used on Class A fires or
for washdown • Cast brass with
rubber bumper • Female hose
thread base • Machined tip • Overall length 4½”
Fig. No.
Base
57313
1½"
Standard Tip
Optional Tips
Fig. No.
Inlet
Outlet
Waterway
½”
e” - 1c” - 1¼”
57913
57915
1½”
2½”
1½”
1½”
1”
1d”
Plain Hose Nozzles
Used on Class A fires or for
washdown • Female hose
thread base • Smooth
tapered bore • Available in
cast brass or red plastic
Fig. Nos.
Size
Length
—
—
—
¾”
1"
1¼”
6"
8"
10"
57155
—
—
1½”
2"
2½”
10"
12"
12"
Brass
Plastic
57321
57322
57323
57324
57325
57326
23
Fire Hose Adapters
Reducers
Double Male Connectors
Female thread larger than male
thread • Cast brass with pin
lugs • Rocker lugs optional •
Polished brass and/or chrome
plated finish optional
Changes female hose thread
to male hose thread • Cast
brass with pin lugs • Rocker
lugs optional • Polished brass
and/or chrome plated finish
optional
Female
Male
Fig. No.
1"
1¼”
1¼”
¾”
¾”
1"
43107
43108
43109
1½”
1½”
1½”
¾”
1"
1¼”
43101
43131
43110
2"
2"
2"
¾”
1"
1½”
43127
43121
43141
2½”
2½”
2½”
2½”
2½”
¾”
1"
1¼”
1½”
2"
43102
43151
43152
43103
43161
3"
3"
3"
3"
¾”
1½”
2"
2½”
43137
43139
43142
43133
4"
4½”
4½”
2½”
2½”
4"
43143
43153
43154
Fig. No.
1½”
1½”
1½”
2½”
43211
43212
2½”
2½”
2½”
3"
43222
43223
Fig. No.
1"
1½”
2"
1"
1½”
2"
43311
43301
43322
2½”
2½”
2½”
1½”
2"
2½”
43321
43322
43302
3"
3"
4"
4"
4½”
2½”
3"
2½”
4"
4"
43332
43333
43342
43344
43354
Changes male hose thread to
female hose thread swivel •
Cast brass with pin lugs •
Double swivels • Rocker lugs
optional • Polished brass
and/or chrome plated finish
optional
Used to change male size and/or
thread • Male thread same size
or larger than female thread •
Cast brass with pin lugs • Rocker
lugs optional • Polished brass
and/or chrome plated finish optional
Male
Male
Double Female Connectors
Female x Male Adapters
Female
Male
24
Female
Female
Fig. No.
1"
1½”
2"
1"
1½”
2"
43411
43401
43422
2½”
2½”
3"
3"
1½”
2½”
2½”
3"
43421
43402
43432
43433
4"
4"
4½”
4½”
2½”
4"
4"
4½”
43442
43444
43454
43455
Fire Hose Adapters
Double Male Hose Nipples
Female x Male Hose Nipples
•
Used to change size
and/or thread
•
Used to change size
and/or thread
•
Cast brass
•
Cast brass
•
Hexagonal wrench flats
•
Hexagonal wrench flats
Both Ends Same Size
Both Ends Same Size
Male
Male
Fig. No.
Female
Male
Fig. No.
1"
1½”
1"
1½”
43510
43501
1"
1½"
1"
1½"
43610
43601
2"
2½”
3"
2"
2½”
3"
43522
43503
43537
2"
2½”
2"
2½”
43622
43603
4"
6"
4"
6"
43544
43566
3"
4"
6"
3"
4"
6"
43633
43644
43666
Reducing / Increasing
Reducing
Male
Male
Fig. No.
Female
Male
Fig. No.
1"
1½”
1½”
1½”
¾”
¾”
1"
1¼”
43507
43517
43511
43512
1"
1½”
1½”
1½”
¾”
¾”
1"
1¼”
43607
43617
43611
43612
2"
2"
1"
1½”
43520
43521
2"
2"
1"
1½"
43620
43621
2½”
2½”
2½”
1"
1½”
2"
43530
43531
43552
2½”
2½”
2½”
1”
1½”
2"
43629
43630
43631
3"
3"
2"
2½”
43535
43536
3"
4"
2½”
2½”
43604
43642
4"
4½”
4½”
2½”
2½”
4"
43542
43552
43554
4½”
4½”
2½”
4"
43643
43654
6"
6"
4"
4½”
43564
43565
6"
6"
4"
4½”
43664
43665
25
Fire Hose Adapters
Double Female Hose Nipples
Male x Female Hose Bushings
•
Used to change size
and/or thread
•
Used to change size
and/or thread
•
Cast brass
•
Cast brass
•
Hexagonal wrench flats
•
Hexagonal wrench
flats
Female
Female
Fig. No.
¾”
1"
1"
1½”
¾”
¾”
1"
1"
43777
43717
43711
43712
1½”
2"
2"
2½”
1½”
1½”
2"
1¼”
43701
43721
43722
43730
2½”
2½”
2½”
3"
1½”
2"
2½”
2½”
43731
43732
43702
43733
Conversion Bushings
Provides a method of converting
any male hose thread to National
Standard Thread (NST) as per
NFPA standard 1963 • Cast brass
• Female hose thread inlet • Set
screw allows permanent attachment • Male
NST outlet • Specify your existing male hose
thread when ordering
Female
Male
Fig. No.
2½”
4"
2½”
4½”
47942
47945
4½”
4½”
4"
4½”
47954
47955
26
Male
Female
Fig. No.
1"
1½”
1½”
¾”
¾”
1"
43801
43817
43802
2”
2"
2"
1"
1¼”
1½”
43809
43810
43811
2½”
2½”
2½”
1"
1½”
2"
43821
43822
43803
3"
3"
3"
1"
1½”
2½”
43831
43835
43833
4"
4"
2½”
3"
43842
43843
4½”
6"
6"
4"
4"
5"
43854
43864
43865
Fire Hose Adapters
Female x Male Swivel Adapters
Female x Female Swivel Adapters
Allows connection of male
hose coupling to standpipe
system • Cast brass • Female
hose thread swivel with pin
lugs • Rigid male NPT outlet •
Hexagonal wrench flats
Allows connection of male hose
coupling to standpipe system • Cast
brass • Female hose thread swivel
with pin lugs • Rigid male outlet •
Hexagonal wrench flats
Female
Male NPT
Fig. No.
1"
1½”
1½”
1"
1½”
2"
48810
48801
48803
2"
2"
1½”
2"
48802
48804
2½”
2½”
2½”
2½”
2½”
1"
1½”
2"
2½”
3"
48806
48808
48805
48807
48809
3"
3"
2½”
3"
48812
48811
4"
4½”
4½”
4"
4"
6"
48813
48815
48817
6"
6"
48819
Screen Material
Male
2"
2½”
3"
Fig. No.
1"
1½”
1½”
2"
1"
1½”
2"
2"
48820
48821
48823
48824
2½"
2½”
2½"
2½”
1½”
2"
2½”
3"
48830
48825
48827
48829
3"
3"
48831
4"
4½”
4"
4"
48833
48835
6"
6"
48839
Allows connection of
fire hose to standpipe
or fire sprinkler system
• Cast brass • Female
hose thread swivel with
pin lugs • Rigid NPT
male or female outlet •
Hexagonal wrench flats • Selfclosing drop clapper prevents
reverse water flow • UL listed
Allows connection of male
hose coupling to standpipe
system, meter, or other device
• Screen prevents entry of
foreign matter • Cast brass •
Available with 304 stainless
steel or plastic screen • Female hose thread
swivel with pin lugs* • Rigid outlet with male
NPT connection • Hexagonal wrench flats
2½”
2½”
2½”
Female NPT
Clappered Swivel Adapters
Swivel Adapters With Screen
Female
Female
304 SS
Plastic
48805-S
48807-S
48809-S
48805-PS
48807-PS
48809-PS
27
Inlet
Outlet
Fig. No.
2½” (F)
2½” (F)
3" NPT (M)
3" NPT (F)
48720
48721
Angle Hose Valves
Used to control the flow of water on wet standpipe systems.
Commonly used with hose rack or reel units, or as a fire
department outlet connection.
•
Cast brass construction
•
Replaceable rubber seat disc
•
Metal handwheel
•
Female NPT inlet
•
Female NPT or male hose thread outlet
•
300 PSI rated
•
UL listed
•
FM approved
Optional Finishes: Polished brass and/or chrome plating.
Variation: With pentagonal hydrant nut to prevent unauthorized
use.
To Order:
1.
2.
3.
4.
Select type of valve and size by Fig. No.
Indicate male hose thread requirements (Fig. Nos.
48302 & 48304 only).
Select optional finish and/or variation, if required.
Cap & chain is ordered separately.
Fig. No.
FxF
FxM
48301
48303
48302
48304
Size
A
B – Open
C
1½”
2½”
2¼”
3¼”
7¾”
11"
3¾”
5"
28
Hose Gate Valves
Used as a fire department outlet connection on dry
standpipe systems • Also used as a pump test valve •
Unrestricted waterway permits full flow • Cast brass
construction • Solid wedge disc with tapered seats • Metal
handwheel • NPT female inlet • Male hose thread outlet •
Available with non-rising or rising stem
Optional Finishes: Polished brass and/or chrome plating.
To Order:
1.
2.
3.
4.
Select type of valve and size by Fig. No.
Indicate male hose thread requirements.
Select optional finish, if required.
Cap & chain is ordered separately.
Non-Rising Stem Valves
Fig. No.
48332
48333
48334
48335
Size
PSI Rated
A
B
C
D
E
Listings &
Approvals
2½”
2½”
3" x 2½”
4"
200
300
300
200
5¼”
5¼”
5¼”
5¼”
9¾”
9¾”
9¾”
13f”
5¾”
5¼”
5½”
6d”
2¼”
2¼”
2¼”
2¾”
3½”
3½”
3¼”
5¼”
—
UL, FM
UL, FM
—
Rising Stem Valves
Fig. No.
48336
48337
Size
PSI Rated
A
B
Closed
B
Open
C
D
E
Listings &
Approvals
2½”
3" x 2½”
200
300
5¾”
5¾”
15"
15"
17½”
18"
6½”
6¼”
2¾”
2¾”
4½”
4½”
—
UL, FM
NOTE: All valves in this series have a metal-to-metal seat. They are not recommended for use on wet standpipe systems.
29
Misc. Hose Valves
Straight Globe Valves
Used to control the flow of water on wet standpipe
systems • Commonly used with hose rack units,
hose reels, or as a fire department outlet
connection • Straight globe pattern is especially
suitable when water supply to hose unit is piped
vertically • Cast brass • Rubber seat disc • Metal
handwheel • NPT female inlet • NPT female or
male hose thread outlet • 300 PSI rated
Fig. Nos.
FxF
FxM
—
48323
48322
48324
Size
A
B
C – Open
D
E
F
1½”
2½”
2½”
3½"
3½”
5"
8¼”
11¼”
3"
3½”
5¾”
8¼”
4¾”
7"
Chicago Hose Valves
Hydrant Valves
Hydrant Gate Valve
Used as a fire hose valve •
45° angle outlet reduces
hose kinking • Cast brass •
Rubber seat disc • Male NPT
inlet • Male NST outlet • Tee
style handle • 175 PSI rated
Used as a fire department
connection • Designed to
prevent unauthorized use •
Cast brass • Rubber seat
disc • Female NPT female
inlet • Male NST outlet •
Pentagonal operating nut •
Union bonnet • Rising stem •
300 PSI rated • Cap & chain
not included — Order
separately
Used for fire hydrant
discharge or for conducting
water flow tests • Cast brass
• Solid wedge disc • PTFE
seat • Female hose thread
swivel inlet • Male hose
thread outlet • Non-rising
stem • Crank style handle •
175 PSI rated
Fig. No.
Size
48325 . . . . . . . . . . . . . . . . 1½”
48326 . . . . . . . . . . . . . . . . 2½”
Fig. No.
Inlet
Outlet
48319
48328
48329
48349
2½”
3"
4"
4"
2½”
2½”
2½”
4½”
30
Fig. No.
Size
74999 . . . . . . . . . . . . . . . . . 2½”
Sprinkler System Valves
4" Brass Check Valves
Swing Check Valves
Used to prevent reverse flow •
Suitable for horizontal or vertical
installation (upward flow only) •
Cast bronze body • Bronze clapper
• Rubber seat disc • Screw–in cap •
Threaded ends comply with ANSI
B2.1 • 200 PSI rated
Used to prevent reverse water flow in fire
protection systems • Normally installed between
fire department connection and standpipe or
sprinkler riser • Suitable for horizontal or vertical
installation (upward flow only) • Forged brass
body • Spring-loaded brass clapper • Tapped
½” NPT for ball drip • 250 PSI rated pressure •
UL listed • FM approved
Fig. No.
Size
Inlet
Outlet
70271
70272
70273
4"
4"
4"
Groove
NPT (M)
NPT (M)
Groove
Groove
NPT (F)
Angle
GL200B-002
GL200B-005
GL200B-007
GL200B-010
¼”
½”
¾”
1"
AV200B-002
AV200B-005
AV200B-007
AV200B-010
GL200B-012
GL200B-015
GL200B-020
1¼”
1½”
2"
AV200B-012
AV200B-015
AV200B-020
SC200B-005
SC200B-007
SC200B-010
½”
¾”
1"
SC200B-012
SC200B-015
SC200B-020
1¼”
1½”
2"
SC200B-025
SC200B-030
SC200B-040
2½”
3"
4"
Used as a sprinkler system
trim valve or for manual
deluge system shutoff •
Quarter turn operation •
Forged brass • Full port •
Self-cleaning chrome plated
ball • PTFE seat • Blowout proof stem •
Threaded ends comply with ANSI B2.1 • ½”
through 2" sizes UL listed and FM approved
Used as a sprinkler
system trim and drain
valve • Cast bronze •
Non-rising stem •
Screw-in bonnet •
Rubber seat disc •
Metal handwheel •
Threaded ends comply
with ANSI B2.1 • 200 PSI rated • Available in
straight globe (illustrated) or angle pattern • 2"
angle pattern UL listed
Size
Size
Full Port Ball Valves
Globe & Angle Valves
Globe
Fig. No.
31
Fig. No.
Size
PSI – WOG
BV600B-002
BV600U-005
BV600U-007
¼”
½”
¾”
600
600
600
BV600U-010
BV600U-012
BV600U-015
1"
1¼”
1½”
600
600
600
BV600U-020
BV400B-025
BV400B-030
BV400B-040
2"
2½”
3"
4"
600
400
400
400
Misc. Valves & Accessories
Gauge Test Valve
Plastic Escutcheons
Allows inspection and/or replacement
of gauge without shutting off entire
line • Forged brass • Rubber seat
disc • Metal handwheel • ¼” NPT
female inlet and outlet • 400 PSI
rated
Used with hose valves to trim pipe
entry into cabinets • One piece
flexible white plastic
Fig. No.
Size
43981 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1½”
43982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2½”
Fig. No.
70241 . . . . . . . . . . . . . . . . . . . . . Gauge Test Valve
Split-Ring Flanges
Used to trim pipe entry • Split-ring
design is suitable for existing
installation or new construction •
Chrome plated steel with spring
loaded hinge
Caps & Chains
Used to protect male hose
threads and prevent entry
of foreign matter •
Available in cast brass with
pin lugs or plastic with
rocker lugs • Female hose
thread • Attached chain • Rocker lugs optional
(brass caps) • Polished brass and/or chrome
plated finish optional (brass caps only)
Brass
Size
Plastic
43900
43910
43901
¾”
1"
1½”
—
—
43961
43905
43902
43907
2"
2½”
3"
—
43962
43963
43903
43904
43906
4"
4½”
6"
—
—
—
Fig. No.
43991 . .
43992 . .
43993 . .
43994 . .
Plastic Hydrant Caps
Used to protect male hose
threads and prevent entry of
foreign matter • High impact
yellow polycarbonate • Female
hose thread • 1c” pentagonal
nut
Fig. No.
43972 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
43974 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
43975 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Size
. 2½”
. . 4"
. 4½”
32
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Size
1½”
2½”
. 3"
. 4"
Fire Department Connections
Exposed Type w/ Clapper Inlets – Two Way
Used to supplement the fire protection water supply • Each inlet
provides a minimum of 250 GPM capacity • Self-closing clappers
prevent reverse water flow out of unconnected inlet • Exposed
design simplifies installation and is suitable for new construction
or remodeling • Cast brass body • 2½” swivel inlets with female
hose thread • NPT female outlet • “AUTO SPKR” or “STANDPIPE”
branding • 175 PSI rated
Optional Finishes: Polished brass and/or chrome plating.
To Order:
1.
2.
3.
4.
5.
6.
Select connection by Fig. No.
Indicate branding required.
Select optional finish, if required.
Indicate hose thread requirements.
Accessories are ordered separately. See page 39.
For complete units including plate and plugs see
page 35.
Fig. Nos.
Size
A
B
C
D
E
48114*
4" x 2½” x 2½”
79/16 "
115/16 "
11¼”
8½”
7¼”
48116
6" x 2½” x 2½”
10”
11½”
10¾”
9"
7¼”
Straight
Angle
48113*
48115
* UL listed and FM approved.
33
Fire Department Connections
Exposed Type w/ Single Clapper
Two Way
Exposed Type w/ Clapper Inlets
Three Way
Fig. No. 48111
Back Outlet
Fig. No. 48118
Back Outlet
Fig. No. 48112
Angle Outlet
Fig. No. 48119
Angle Outlet
Used to supplement the fire protection water
supply • Each inlet provides a minimum of 250
GPM capacity • Self-closing clapper prevents
reverse water flow out of unconnected inlet •
Exposed design simplifies installation and is
suitable for new construction or remodeling •
Cast brass body • 2½” swivel inlets with female
hose thread • 4" NPT female outlet • “AUTO
SPKR” branding • UL listed • FM approved •
300 PSI rated
Used to supplement the fire protection water
supply • Each inlet provides a minimum of 250
GPM capacity • Self-closing clappers prevent
reverse water flow out of unconnected inlet •
Exposed design simplifies installation and is
suitable for new construction or remodeling •
Cast brass body • 2½” swivel inlets with female
hose thread • NPT female outlet • 175 PSI
rated
Optional Finishes: Polished brass and/or
chrome plating.
Optional Finishes: Polished brass and/or
chrome plating.
Fig. No.
Size
Outlet
48111
48112
4" x 2½” x 2½”
4" x 2½” x 2½”
Back
Angle
Fig. No.
Size
Outlet
48118
48119
6" x 2½” x 2½” x 2½”
6" x 2½” x 2½” x 2½”
Back
Angle
To Order Connections on Pages 34 & 35:
1.
2.
3.
4.
Select connection by Fig. No.
Select optional finish, if required.
Indicate hose thread requirements.
Accessories are ordered separately. See page 39.
34
Fire Department Connections
Exposed Type – Complete Units
Used to supplement the fire protection water supply • Each inlet provides
a minimum of 250 GPM capacity • Self-closing clappers prevent reverse
water flow out of unconnected inlet • Exposed design simplifies
installation and is suitable for new construction or remodeling • Cast
brass body • 2½” swivel inlets with female hose thread • Each inlet
independently clappered • NPT female outlet • Plugs & chains as required
included • “AUTO SPKR” or “STANDPIPE” branding • 175 PSI rated
Optional Finishes: Polished brass and/or chrome plating.
Fig. No.
Size
48131*
48132
4" x 2½” x 2½”
6" x 2½” x 2½”
A
B
C
9¼”
11¼”
115/16"
11½”
79/16"
10”
* Includes Fig. No. 48113 connection, UL listed and FM approved.
Free Standing Type
Used to supplement the fire protection
water supply • Each inlet provides a
minimum of 250 GPM capacity • Selfclosing clappers prevent reverse water
flow out of unconnected inlet • Free
standing design is used on exterior fire
lines piped vertically through the grade
Two or Three Way
Cast brass body • 2½” swivel inlets with
female hose thread • Each inlet
independently clappered • NPT female
bottom outlet • 18" cover sleeve • Round
identification plate • Plugs & chains as
required included • “AUTO SPKR” or
“STANDPIPE” branding • 175 PSI rated
• Overall height 24"
Four Way
Cast brass body • UL listed clappered
swivel adapters with 2½” inlets with
female hose thread swivel • NPT female
bottom outlet • 18" cover sleeve • Round
identification plate • Plugs & chains as
required included • “AUTO SPKR” or
“STANDPIPE” branding • 175 PSI rated
• Overall height 33"
48101 • 48102
48103
48105
Radius
Swing
Fig. No.
Size
48101*
48102
4" x 2½” x 2½”
6" x 2½” x 2½”
7d”
7d”
48103
6" x 2½” x 2½” x 2½”
7¾”
48105
48106‡
6" x 2½” x 2½” x 2½” x 2½”
6" x 2½” x 2½” x 2½” x 2½”
7½”
12½”
* Includes Fig. No. 48114 connection, UL listed and FM approved.
‡ Horizontal in-line style body. Not shown above.
Optional Finishes: Polished brass
and/or chrome plating.
35
Fire Department Connections
Flush Type
Four Way Horizontal or Vertical
Used to supplement the fire protection water
supply • Each inlet provides a minimum of 250
GPM capacity • Self-closing clappers prevent
reverse water flow out of unconnected inlet(s) •
Flush design is used primarily in new
construction where appearance is a
consideration
Straight pattern (back outlet) cast
brass body with female NPT outlet •
Clappered swivel adapters with 2½”
inlets with female hose thread swivel
• Rectangular identification plate branded
“AUTO SPKR” or “STANDPIPE” • Plugs &
chains • 175 PSI rated • UL listed
Two & Three Way
Straight pattern (back outlet)
cast brass body with drop
clappered inlets and female
NPT outlet • 2½” inlets with
female hose thread swivel •
Rectangular identification
plate branded “AUTO
SPKR” or “STANDPIPE” • Plugs & chains • 175
PSI rated
Optional Finishes: Polished brass and/or
chrome plating on all exposed surfaces
Variations: Angle pattern (top or bottom outlet)
brass body; polyester coated carbon steel body
Optional Finishes: Polished brass and/or
chrome plating on all exposed surfaces
Variation: Angle pattern (top or bottom outlet)
body
Fig. No.
Size
48141
48142
48143
4" x 2½” x 2½”
6" x 2½” x 2½”
6" x 2½” x 2½” x 2½”
Fig. No.
Size
Type
48154
48164
6" x 2½” x 2½” x 2½” x 2½”
6" x 2½” x 2½” x 2½” x 2½”
Horizontal
Vertical
Listings &
Approvals
UL, FM
UL, FM
—
To Order Connections on
Pages 36 & 37:
1.
2.
3.
Four Way Square
Straight pattern (back outlet)
cast brass body with female
NPT outlet • UL listed
clappered swivel adapters with
2½” inlets with female hose
thread swivel • Rectangular
identification plate branded “AUTO SPKR” or
“STANDPIPE” • Plugs & chains • 175 PSI rated
4.
5.
Select connection by Fig. No.
Indicate branding required.
Select optional finish and/or
variations, if required.
Indicate hose thread
requirements.
Accessories are ordered
separately. See page 39.
Optional Finishes: Polished brass and/or
chrome plating on all exposed surfaces
NOTE: Dimensional drawings for these connections are
provided upon request. Indicate Fig. No. and variation(s),
if any, when requesting drawings.
Variation: Angle pattern body
Fig. No.
Size
48144 . . . . . . . . . . . . . . 6" x 2½” x 2½” x 2½” x 2½”
36
Pump Test Conns. • Wall Hydrants
Pump Test Connections
Used to test fire pump flow capacity • Each outlet provides minimum flow
of 250 GPM • Gate valves provide unrestricted waterway and control of
individual outlets • Cast brass or polyester coated carbon steel body with
end inlet • Brass hose gate valves with 2½” male hose thread outlet •
Caps & chains • Rectangular brass identification plate lettered “PUMP
TEST CONNECTION”
Optional Finishes: Polished brass and/or chrome plating on all exposed
surfaces.
Variations: Grooved or flanged inlet (carbon steel bodies), straight or
angle inlet.
Fig. No.
Pump GPM
Inlet
Outlets
Body
48621
48622
500
750
4"
6"
2 – 2½”
3 – 2½”
Brass
Brass
48623
48624
1000
2000
6"
8"
4 – 2½”
6 – 2½”
Carbon Steel
Carbon Steel
Wall Hydrants – Exposed Type
Wall Hydrants – Flush Type
Used as a fire department outlet
connection • Each outlet
provides minimum flow of 250
GPM • Exposed design
simplifies installation and is
suitable for new construction or
remodeling • Straight pattern (back
inlet) cast brass body with NPT female inlet •
2½” outlets with male hose thread • Round
identification plate branded “WALL HYDRANT”
• Caps & chains • 175 PSI rated
Used as a fire department
outlet connection • Each
outlet provides minimum
flow of 250 GPM • Flush
design is used primarily in
new construction where
appearance is a
consideration • Straight pattern (back inlet) cast
brass body with NPT female inlet • 2½” outlets
with male hose thread • Rectangular
identification plate branded “WALL HYDRANT”
• Caps & chains • 175 PSI rated
Optional Finishes: Polished brass and/or
chrome plating on all exposed surfaces.
Optional Finishes: Polished brass and/or
chrome plating on all exposed surfaces.
Fig. No.
Size
48231 . . . . . . . . . . . . . . . . . . . . . . . . 4" x 2½” x 2½”
48232 . . . . . . . . . . . . . . . . . . . . . . . . 6" x 2½” x 2½”
Variations: Angle pattern (top or bottom inlet)
body
Fig. No.
Size
48241 . . . . . . . . . . . . . . . . . . . . . . . . 4" x 2½” x 2½”
48242 . . . . . . . . . . . . . . . . . . . . . . . . 6" x 2½” x 2½”
37
Roof Manifolds
Used as a fire department outlet connection •
Angle valves or gate valves attach directly to
body • Functions as a hydrant when furnished
with male hose thread outlets • Cast brass •
Straight or angle pattern body • NPT female
inlet • 2½” NPT male outlets • Male hose thread
outlets optional • 175 PSI rated • Valves are
ordered separately
In-Line Pattern
Variation: With male hose thread outlets
Valves attach to manifold with pipe nipples
(supplied by others) • NPT female inlet(s) • NPT
female outlets
Two Way • Straight or Angle Pattern
Vertical
Fig. No.
Type
Size
48411
48412
Straight
Straight
4" x 2½” x 2½”
6" x 2½” x 2½”
48415
48416
Angle
Angle
4" x 2½” x 2½”
6" x 2½” x 2½”
Fig. No.
Type
Size
48421
Two-way
4" x 2½” x 2½”
48424
Three-way
6" x 2½” x 2½” x 2½”
Horizontal
Three Way • Straight or Angle Pattern
Fig. No.
Type
Size
48431
48432
Two-way
Two-way
4" x 2½” x 2½”
6" x 2½” x 2½”
48433
48434
Three-way
Three-way
4" x 2½” x 2½” x 2½”
6" x 2½” x 2½” x 2½”
48435
48436*
Four-way
Four-way
6" x 3" x 3" x 3" x 3"
6" x 3" x 3" x 3" x 3"
* 90° angle pattern. Not shown above.
Fig. No.
Type
Size
48414
Straight
6" x 2½” x 2½” x 2½”
48417
48418
Angle
Angle
4" x 2½” x 2½” x 2½”
6" x 2½” x 2½” x 2½”
38
Accessories
Round Identification Plates
Used to identify and trim exposed fire department connections • Available
in red plastic, brass with satin finish, or aluminum with red painted finish
Fig. No.
Pipe Size
Material
Legend
48901
48902
48904
4"
4"
4"
Aluminum
Brass
Plastic
AUTO SPKR or STANDPIPE
AUTO SPKR or STANDPIPE
AUTO SPKR
48903
48906
6"
6"
Brass
Aluminum
AUTO SPKR or STANDPIPE
AUTO SPKR or STANDPIPE
Signs
Used to identify fire department connections • Available in red enamel
finished aluminum or white plastic with red lettering • Overall size 4" high
x 8" wide
Fig. No.
Material
Legend
F-48-A
F-51-P
F-52-P
F-53-P
F-85-P
Aluminum
Plastic
Plastic
Plastic
Plastic
FIRE DEPT. CONN.
DRY STANDPIPE FIRE DEPT. CONN.
AUTO. SPRINKLER FIRE DEPT. CONN.
FIRE DEPT. SPRINKLER CONN.
WET STANDPIPE FIRE DEPT. CONN.
Plugs & Chains
Breakable Caps
Used to protect
female hose
threads and
prevent entry of
debris • Cast
brass • Male
hose thread •
Attached chain •
Pin lugs • Rocker lugs
optional • Polished brass
and/or chrome plated finish
optional
Used to protect
2½” female hose
threads and
prevent entry of
debris • Easily
removed by a
sharp blow from a spanner or
hydrant wrench • Complete
with eye bolts and nuts •
Sold in pairs
Fig. No.
43931 . .
43930 . .
43932 . .
43934 . .
43936 . .
43937 . .
43939 . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Size
1½”
. . 2"
2½”
. . 3"
. . 4"
4½”
. . 6"
Fig. No.
Material
48911 . . . . . . . . . . . . Aluminum
48912 . . . . . . . . . . . . . . Plastic
39
Automatic Drain
Devices
Drains low point
of standpipe
system between
fire department
connection and check valve •
Seals automatically at 7 to
10 PSI • Cast brass • NPT
male ends
Fig. No.
Size
48921 . . . . . . . . . . . . . . . . . . ½”
48922 . . . . . . . . . . . . . . . . . . ¾”
Sprinkler Accessories
Head Guards
Escutcheons
Protects sprinkler
from mechanical
damage • Fits most
standard ½” sprinklers
• Heavy gauge spot
welded steel wire •
Red enamel finish
Used to conceal and trim pipe
penetration of finished ceiling or wall
• Available in flat or telescoping
two-piece adjustable style
• Available in chrome or
white finish – Specify
when ordering
Fig. No.
68951 . . . . . . . . . Economy Head Guard, One Piece
68952 . . . . . . . . . Universal Head Guard, Two Piece
Sight Glass
Permits inspector to check
sprinkler system flow •
Bronze body with clear
polycarbonate windows •
NPT male x NPT female
connection
Fig. No.
Size
Orifice Restriction
68961
68962
1"
1"
½
None
68963
68964
1"
1¼”
17
Fig. No.
IPS
Depth
68991
68992
½”
¾”
½”
½”
68993
68994
½”
¾”
2" - 3" Adjustable
2" - 3" Adjustable
Recessed Escutcheons
Used to recess sprinklers into a
suspended ceiling or wall • Two
piece design allows up to ¾” of
adjustment • Available in chrome
or white finish – Specify when
ordering
Fig. No.
68995 . . . . . . . . . . . . . . . ½” Recessed Escutcheon
68996 . . . . . . . . . . . . . . . ¾” Recessed Escutcheon
/32"
None
Sprinkler Head Boxes
Sprinkler Gauge
Accommodates ½” or ¾”
sprinklers plus wrench •
Heavy gauge spot welded
steel construction • Red
polyester powder finish
Provides accurate water pressure
readings • 3½” dial • ¼” NPT stem
• 0 to 300 PSI scale • UL listed •
FM approved
Fig. No.
68981 . . . . . . . . . . . . Sprinkler Gauge, 0 – 300 PSI
Fig. No.
Capacity
68971
68972
68973
12 Sprinklers
6 Sprinklers
6 ESFR Sprinklers
40
Signs • Testing Equipment
Signs
•
Used to identify various system components
•
Aluminum with screen printed legend and mounting
holes
2" x 6" Signs
2" x 6" Signs
7" Round Signs
68901
68902
68903
68904
68905
68906
68907
68908
68909
68913
68914
68915
68916
68917
68919
68920
68921
68922
68923
68924
68925
68926
68927
68911
68912
Air Line
Alarm Line
Alarm Test
Anti-Freeze System
Auxiliary Drain
Control Valve
Drain Valve
Dry Standpipe
Entire System
Fire Sprinkler Valve
From City Main
In This Building
In This Section
Inspectors Test
Main Drain
Open Sprinkler Control
Open Sprinkler Valve
Sprinkler Control Valve
Sprinkler Valve Room
Test & Drain
Test Valve
Water Motor Line
Wet Standpipe
Fire Alarm Bell
911 Fire Alarm Bell
5" x 7" Sign
68918
Hydraulic System
9" x 7" Sign
68910
Fire Alarm Bell
Pitot Gauge
Hydrant Cap Gauges
Piezometer
Allows accurate pressure
and flow calculations •
Chrome plated tube • Liquid
filled gauge with 2-1-2%
accuracy in accordance with
ASME/ANSI B40.1 Grade A •
Includes molded plastic
carrying case with foam
lining • Specify scale when
ordering: 0 – 160 PSI, 0 –
200 PSI, or 0 – 300 PSI
Measures static (nonflowing) pressure on
hydrants or standpipes •
Cast brass cap with female
hose thread • Bleed valve •
Liquid filled gauge with • 2-12% accuracy in accordance
with ASME/ANSI B40.1
Grade A • Specify scale
when ordering: 0 – 160 PSI,
0 – 200 PSI, or 0 – 300 PSI
Measures residual (flowing)
pressure in hose lines • Cast
brass body • Female hose
thread swivel inlet • Male
hose thread outlet • Liquid
filled gauge with 2-1-2%
accuracy in accordance with
ASME/ANSI B40.1 Grade A •
Specify scale when ordering:
0 – 160 PSI, 0 – 200 PSI, or
0 – 300 PSI
Fig. No.
33201 . . . . . . . . . . Pitot Gauge
Fig. No.
Size
33220 . . . . . . . . . . . . . . . . 1½”
33221 . . . . . . . . . . . . . . . . 2½”
Fig. No.
Size
33211 . . . . . . . . . . . . . . . . . 1½”
33212 . . . . . . . . . . . . . . . . . 2½”
41
Testing Equipment
Liquid Filled Pressure Gauges
Inspector’s Flow Nozzle
Designed specifically for fire
system testing • Stainless steel
case • Brass and bronze
internals • Liquid filled • Acrylic
window • Aluminum dial and
pointer • 2½” dial •¼” NPT LM
connection • 2-1-2% accuracy
(ASME/ANSI B40.1 Grade A)
Used to conduct fire hydrant or
pump tests • Compensates
for variations in i.d. of
hydrant nozzle openings,
eliminating the need to
individually calculate hydrant’s flow
coefficient • All brass construction with nickel
plated finish • 2¼” i.d. smooth bore tube •
Constant 0.88 coefficient of flow from 10 – 56
PSI • 6" overall length • 2½” NST female base
Graduations – PSI
Fig. No.
Scale
Major
Minor
PG24-060
PG24-100
PG24-160
0 – 60 PSI
0 – 100 PSI
0 – 160 PSI
5
10
20
1
2
10
PG24-200
PG24-300
0 – 200 PSI
0 – 300 PSI
20
30
10
10
Fig. No.
N2517 . . . . . . . . . . . . . . . . . Inspector’s Flow Nozzle
Underwriters Playpipe
Used to conduct flow
tests • Tapered
brass tubing with
marlin cord wrapping • Female hose
thread base with swivel handles • Includes tip •
30" overall length • UL listed & FM approved
when furnished with 1c” tip
Inspector’s Test Gauges
Used for testing when
highly accurate
measurements are
required • Stainless steel
case • 316 stainless steel
tube and socket • Teflon
coated bearings and pinion
gear • Adjustable black
pointer with red painted
knife edge tip • Zeroadjustable white aluminum
dial with polished mirror
band • 3" dial • ¼” NPT LM
connection • ±0.5% full
scale accuracy
(ASME/ANSI B40.1 Grade 2A) • Includes
padded nylon carrying pouch
Size
Standard Tip
Optional Tips
57311
2½”
1c”
1" thru 1¾”
Playpipe Tip
Used with Underwriters playpipe •
Cast brass with satin finish •
Female ULT base
Fig. No.
57314
Graduations – PSI
Fig. No.
Fig. No.
Scale
Major
Minor
TG1084-060
TG1084-100
TG1084-160
0 – 60 PSI
0 – 100 PSI
0 – 160 PSI
5
10
20
1
2
10
TG1084-200
TG1084-300
0 – 200 PSI
0 – 300 PSI
20
30
10
10
42
Base
Standard Tip
Optional Tips
1½”
1c”
1" thru 1¾”
Testing Equipment • Alarm Bells
Water Flow Test Kits
Fire Alarm Bells
Signals activation of a fire alarm
or sprinkler system • Steel gong
• Enclosed motor • Mounts to a
standard 4" conduit box • DC
bells are polarized for use in
supervised fire alarm systems •
UL listed • FM approved • CSFM approved •
Specify voltage when ordering
Contains a complete assortment of instruments
for testing standpipe and sprinkler systems.
Each kit includes:
•
Pitot gauge
•
Piezometer
•
Hydrant cap gauge
•
Flow charts
•
Molded plastic carrying case with foam
lining
Fig. No.
Size
Voltage
10501
10502
10503
6"
8"
10"
6, 12, or 24 VDC
10504
10505
10506
6"
8"
10"
24 or 120 VAC
Wire Bell Guard
Protects fire alarm bell from
mechanical damage and
vandalism • Heavy gauge spotwelded steel wire • Fits bells from
6" to 10" diameter
Fig. No.
10991 . . . . . . . . . . . . . . . . . . . . . . . Wire Bell Guard
Weatherproof Back Box
Fig. No.
33241 . . . . . . . . . . . . . . . . . 1½” Water Flow Test Kit
33242 . . . . . . . . . . . . . . . . . 2½” Water Flow Test Kit
Allows bell to be installed outdoors
• Standard 4" square size x 1½”
deep with gasket • ½” conduit
knockouts • Red finish
Fig. No.
10599 . . . . . . . . . . . . . . . . . Weatherproof Back Box
43
Flow & Supervisory Switches
Flow Switches
Supervisory Switches
Used to detect flow of water through a
sprinkler system • Transmits an electrical
impulse to activate audible and/or visual alarms
• Continuous water flow equal to discharge from
one sprinkler actuates switch • Synchronized
switches activate alarm panel and local alarm
bell simultaneously • Aluminum switch
enclosure • Two SPDT contacts • Adjustable 090 second time delay minimizes false alarms •
UL listed • FM approved • CSFM approved
10611
Detects unauthorized operation of a control
valve • Transmits an electrical impulse to
activate audible and/or visual alarms •
Synchronized switches activate alarm panel
and local alarm bell simultaneously • Aluminum
switch enclosure • Two SPDT contacts •
Suitable for outdoor use • UL listed • FM
approved • CSFM approved
Vane Type
For use with Sch. 10 thru Sch. 40 steel pipe
Fig. No.
Pipe Size
PSI Rated
10601
10602
10603
2"
2½”
3"
450
450
450
10605
10605
10606
10607
10608
3½"
4"
5"
6"
8"
450
450
450
450
450
Tee Style
For use with any tee that has a 1" branch •
Suitable for 1" thru 2" ferrous and non-ferrous
tees, 1" thru 2" copper sweat tees, 1" CPVC
tees, and 1½” polybutylene tees
Fig. No.
Pipe Size
PSI Rated
10600*
1" thru 2"
250
10612
* UL Listed & CSFM approved only
44
Fig. No.
For Use With
10611
10612
OS & Y Valves
Post Indicator & Butterfly Valves
Station Monitors
750 GPM Station Monitor
1250 GPM Station Monitor
•
Provides high volume fire protection for
extra hazard areas
•
Provides high volume fire protection for
extra hazard areas
•
Single waterway design reduces friction
loss, improves effective reach of fire
stream
•
Single waterway design reduces friction
loss, improves effective reach of fire
stream
•
Brass waterway
•
Brass waterway with turning vanes in
each elbow for flow efficiency
•
Lever handle control
•
Lever handle control
•
Double seal swivels with locking
provision and grease fittings for
lubrication
•
Double seal swivels with locking
provision and grease fittings for
lubrication
•
Red enamel finish
•
Illustrated with Fig. No. 52105 nozzle
(order nozzle separately)
•
Red enamel finish
•
Illustrated with Fig. No. 52105 nozzle
(order nozzle separately)
Fig. No.
51101
Waterway
2½”
Rated Flow
750 GPM
Base Flange
3" or 4" Class 150 FF
Outlet
2½” NST (M)
Horizontal Rotation
360°
Vertical Rotation
135°
Dimensions
19" H x 19" W
45
Fig. No.
51102
Waterway
3”
Rated Flow
1250 GPM
Base Flange
3" or 4" Class 150 FF
Outlet
2½” NST (M)
Horizontal Rotation
360°
Vertical Rotation
150°
Dimensions
17" H x 12" W
Station Monitors
750 GPM Station Monitor
1250 GPM Station Monitor
•
Provides high volume fire protection for
extra hazard areas
•
Provides high volume fire protection for
extra hazard areas
•
Traditional double waterway design
•
•
Brass waterway
Single waterway design reduces friction
loss, improves effective reach of fire
stream
•
Lever handle control
•
Brass waterway
•
Double seal swivels with locking
provision and grease fittings for
lubrication
•
Vertical handwheel control
•
Double seal swivels with locking
provision and grease fittings for
lubrication
•
Red enamel finish
•
Illustrated with Fig. No. 52105 nozzle
(order nozzle separately)
•
Red enamel finish
•
Illustrated with Fig. No. 52105 nozzle
(order nozzle separately)
Fig. No.
51201
Waterway
2"
Rated Flow
750 GPM
Base Flange
3" or 4" Class 150 FF
Outlet
2½” NST (M)
Horizontal Rotation
360°
Vertical Rotation
130°
Dimensions
18" H x 22" W
46
Fig. No.
51211
Waterway
3”
Rated Flow
1250 GPM
Base Flange
3" or 4" Class 150 FF
Outlet
2½” NST (M)
Horizontal Rotation
360°
Vertical Rotation
150°
Dimensions
17" H x 15" W
Portable Monitors
Portable Monitors
Provides high volume fire protection for extra hazard areas •
Portable design with folding legs allows monitor to be placed
where needed • Single waterway design reduces friction loss,
improves effective reach of fire stream • Lightweight aluminum
alloy construction • Vertical handwheel control • Available with (2)
2½” NST female swivel inlets or (1) 4" or 5" Storz inlet • Spring
loaded locking pins for secure base set-up • Safety stop prevents
vertical rotation below 30° • Red enamel finish • Nozzle is ordered
separately • Overall dimensions 25" x 26" x 16" (L x W x H)
Fig. No.
51708
51710
Waterway
Rated Flow
Inlet
Outlet
3"
3"
800 GPM
1000 GPM
(2) 2½” NST
(1) 4" or 5" Storz
2½” NST
2½” NST
Portable Wheeled Monitor
Monitor Trailer
Provides high volume mobile fire protection for
extra hazard areas • Four wheeled portable
design is designed for one-man operation • Full
flow carbon steel manifold with (2) 2½” NST
female swivel inlets • 750 GPM brass monitor
with 2½” waterway • Hose racks accommodate
up to 100' of 2½” single jacket hose • Large 4ply pneumatic tires for easy maneuvering over
rough or uneven terrain • Wheel locks •
Drawbar with tee-style handle • Red enamel
finish • Numerous options available • Nozzle
and hose are ordered separately
Provides high volume fire protection for extra
hazard areas • Two wheeled portable design
suitable for towing at speeds up to 25 MPH •
Full flow carbon steel manifold with (2) 2½”
NST female swivel inlets • 750 or 1250 GPM
brass monitor with 2½” waterway • Hose racks
accommodate up to 300' of 2½” double jacket
hose • Large 4-ply pneumatic tires for easy
maneuvering over rough or uneven terrain •
Spring loaded wheel locks • Drawbar with ball
or lunette-type hitch • Red enamel finish •
Numerous options available • Nozzle and hose
are ordered separately • Overall dimensions
80" x 65" x 52" (L x W x H)
Fig. No.
51301 . . . . . . . . . . . . . . . Portable Wheeled Monitor
Fig. No.
51307 . . . . . . . . . . . . . . . . 750 GPM Monitor Trailer
51312 . . . . . . . . . . . . . . . 1250 GPM Monitor Trailer
47
Master Stream Nozzles
Constant Gallonage Nozzles
Used on Class A & B fires • Variable fog and straight stream
patterns • Constant gallonage; flow rate remains constant through
all pattern adjustments • Cast brass • Rubber bumper (Fig. Nos.
52108 & 52110) • Grease fittings for lubrication • 2½” NST female
base
Fig. No.
Size
Flow GPM
Length
52103
52105
52107
2½”
2½”
2½”
300
500
700
7"
7"
7"
52108
52110
2½”
2½”
750
1000
8"
8"
Selectable Gallonage Nozzles
Used on Class A & B fires • Variable fog and straight stream
patterns • Constant gallonage; selected flow rate remains
constant through all pattern adjustments • Cast brass • Large
protective rubber bumper • Grease fittings for lubrication • 2½”
NST female base • Overall length 8½”
Fig. No.
Size
Flow GPM
Length
52134
52157
2½”
2½”
300-400-500-600
500-750-1000-1250
8"
8½”
Self-Educting Foam Nozzles
Used to apply foam solution on Class B fires • Built-in eductor
eliminates the need for separate foam proportioning hardware •
Compatible with AFFF and ARC foam • Also suitable for wateronly use on Class A fires • Variable fog and straight stream
patterns • Constant gallonage; flow rate remains constant through
all pattern adjustments • Cast brass • Grease fittings for
lubrication • Includes 9' clear PVC pickup hose • 2½” NST female
base
Fig. No.
Size
Flow GPM
Proportioning
Length
52873
52875
52877
2½”
2½”
2½”
350
500
750
6% (½, 1, or 3% optional)
3% (½ or 1% optional)
3% (½, 1, or 6% optional)
7"
7"
7"
48
Monitor Accessories
Deluge Tips
Monitor Hydrant Mount
For use on Class A fires •
Delivers a far reaching solid
straight stream • Cast brass
with satin finish • 2½” NST
female base • Polished brass and/or chrome
plated finish optional
Fig. No.
Length
Tip Orifice
52151
52152
6¼”
9"
1"
1½”
Butterfly Valves
Used to control water flow to
monitor • Wafer or lug style
cast iron body (lug style
illustrated) • Aluminum
bronze disc • EPDM seat •
Stainless steel stem •
Locking lever handle • 200
PSI rated • Meets requirements of MSS SP-67 •
Gear operator optional (suffix -G)
Allows monitor to be mounted directly on
hydrant • 2½” NST female swivel inlet • 3"
Class 150 flange outlet • Mounting brackets
with hardware included • To ensure proper fit,
indicate hydrant barrel o.d. when ordering
Fig. No.
52901 . . . . . . . . . . . . . . . . . . Monitor Hydrant Mount
Fig. Nos.
Size
3"
4"
Wafer
Lug
71905
71906
71915
71916
Monitor Hydrant Base
Allows connection of valves
and/or hose lines at base of
monitor • Carbon steel
construction • 6" Class 150 RF
flange base • 4" Class 150
RF flange outlet • Four (4)
2½” NPT male outlets • Red
polyester powder coat finish
inside & out • Hose nipples and/or
valves are ordered separately
Fig. No.
52964 . . . . . . . . . . . . . . . . . . Monitor Hydrant Base
49
Fire Hydrant Accessories
Plain Wyes
Hydrant Flushing Elbows
Divides one hose line
into two • Cast brass
construction • Female
swivel inlet • Two male
hose thread outlets
Directs water flow away from traffic
and/or landscaped areas when
flushing hydrant • Cast brass swivel
with female fire hose thread •
Aluminum elbow • Swivels a full 360°
Fig. No.
Female
Male (2)
74101
74102
74103
1½”
2½”
2½”
1½”
1½”
2½”
74104
74105
4"
4½”
2½”
2½”
Fig. No.
Size
47925 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2½”
47940 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4"
47945 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4½”
Hydrant Diffusers
Used for fire hydrant flushing • Directs discharge
away from traffic and/or landscaped areas •
Specially designed outlet and screen reduce
high velocity discharge to a slower, diffused
flow • Swivels a full 360° • Female hose
thread swivel inlet • Carbon steel body • 304
stainless steel screen • Red polyester
powder coat finish inside and out for
improved appearance and corrosion resistance
Gated Wye
Divides one hose
line into two •
Forged brass •
Female swivel inlet
• Two male hose
thread outlets •
Individual quarter
turn shutoffs
Fig. No.
Female
Male (2)
74121
2½”
1½”
Fig. No.
Size
47825 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2½”
47840 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4"
47845 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4½”
Out of Service Covers
Hydrant Discharge Elbows
Used for fire hydrant
discharge or flow testing •
Cast brass • Female swivel
inlet • Male hose thread
outlet
Fig. No.
Size
Style
74901
74902
2½”
2½”
45°
90°
Used to identify non-working hydrants
or post indicator valves • Heavy duty
nylon reinforced vinyl • Brass eyelets
allow cover to be secured with ordinary
nylon cable ties • Hydrant covers are
available in two lengths: 30" for smaller
wet barrel hydrants, 36" for standard dry
barrel or 3-way wet barrel hydrants • PIV
cover is 32" long to fit most vertical
indicator posts • Covers are available in red
or yellow with contrasting lettering
Fig. No.
Length
Color
For Use With
53471
53472
30"
30"
Red
Yellow
Fire Hydrant
Fire Hydrant
53473
53474
36"
36"
Red
Yellow
Fire Hydrant
Fire Hydrant
53475
32"
Yellow
Indicator Post
50
Hose House
Installed adjacent to fire hydrant to store fire hose and
accessory equipment. Accommodates up to 300' of 2½”
double jacket fire hose plus accessories.
•
16 gauge galvanized steel construction
•
Double doors with padlock hasp
•
Interior shelf for equipment storage
•
Suitable for wall mounting or free standing
installation with optional legs
•
Red polyester powdercoat finish
•
Weatherproof
Hose House Options
Description
Suffix
Four (4) legs for free standing installation
304 stainless steel construction
L
SS
To Order:
1.
2.
3.
Select hose house by Fig. No.
Select option(s), if required.
Equipment is ordered separately.
Fig. No.
16103
H
W
D
42"
58"
15"
NOTES:
1. See page A9 for hose house equipment selection.
2. Fig. Nos. 16101 and 16102 are discontinued.
51
Hydrant Houses
Installed over fire hydrant to store fire hose and accessory
equipment. Accommodates up to 300' of 2½” double jacket
fire hose plus accessories.
Pentagonal
•
Available in pentagonal or low silhouette style
•
18 gauge galvanized steel panels
•
Angle iron frame
•
Double doors with padlock hasp and embossed
“FIRE HOSE” lettering
•
Interior shelves for equipment storage
•
Red zinc chromate prime coat finish
•
Weatherproof
•
FM approved
Hydrant House Options
Description
Suffix
Aluminum construction
Red enamel finish
AL
R
Low Silhouette
To Order:
1.
2.
3.
Select hydrant house by Fig. No.
Select optional material and/or finish, if required.
Equipment is ordered separately.
All Models
Fig. No.
Style
16111
16112
16113
Pentagonal
Low Silhouette
Low Silhouette
H
W
D
71"
32½”
32½”
61"
44"
55"
61"
44"
55"
NOTES:
1.
2.
See page A9 for hydrant house equipment selection.
Fig. Nos. 16111 through 16113 are shipped unassembled.
52
Roof House
Used to provide hose stations at roof level on large industrial
buildings • Accommodates up to 150' of 1½” SJRL fire hose
•
•
14 gauge galvanized steel base
14 gauge galvanized steel cover with heavy duty hinge
with brass pin
20 gauge galvanized steel hose bed with (3) access
sleeves for piping connections
Plated cover latch
“FIRE HOSE” lettering embossed into cover
Red enamel finish
FM approved
•
•
•
•
•
Roof House Option
Description
Suffix
Steel curb w/ red enamel finish (34¾” W x 39¾” L x 12" H)
C
Suggested Equipment:
Fig. No. 48301 F x F angle hose valve (1½”) with extended stem
Fig. No. 48321 F x F globe valve (1½”) with extended stem
Fig. No. GL200B-005 F x F globe valve (½”) with extended stem
Fig. No. 43501 M x M hose nipple, 1½” NPT x NST
Fig. No. 57103 brass fog nozzle, 1½” NST
Fig. No. 39101 SJRL fire hose, 1½”, length to suit local
requirements
To Order:
1.
2.
3.
Select roof house by Fig. No.
Select optional curb, if required.
Equipment is ordered separately.
Fig. No.
W
L
H
16114
36"
40"
11"
NOTE: Dimensions shown above are less curb.
53
Carts & Trailers
Fire Equipment Carts
Provides a ready means of storing and transporting fire
protection equipment • 14 gauge welded steel construction •
Large 4-ply pneumatic tires • “Fifth wheel” steering for short
turning radius • Drawbar with tee-style handle • Front
compartment accommodates up to four (4) portable fire
extinguishers • Large rear compartment with hinged cover •
Baked-on red enamel finish • Equipment is ordered separately
Fig. No.
Overall Dims. — W x L . . . . . . . . .
Wheel Size . . . . . . . . . . . . . . . . . .
Rear Box — W x L x D . . . . . . . . .
Open Front — W x L x D . . . . . . .
Approx. Weight . . . . . . . . . . . . . . .
73198
73199
24" x 48"
10"
24" x 29" x 20"
24" x 19" x 11"
180 lbs.
30" x 60"
12"
30" x 41" x 20"
30" x 19" x 11"
210 lbs.
Hose Trailer
Provides mobile storage for flat-folding fire hose •
Heavy gauge steel frame and box • Hose bed
constructed with redwood slats to facilitate
drainage and hose drying • Ball type hitch •
Pneumatic tires • Spring loaded wheel locks • Red
polyester powder coat finish • Numerous options
available, including tool boxes, weather cover,
equipment brackets, lighting and braking systems
to DOT standard
Fig. No.
46301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose Trailer
54
Tools
Adjustable Hydrant Wrench
Knott Spanner
Fits pentagonal or square
hydrant wrench to 1¾” •
Spanner hook fits pin
lugs or rocker lugs from 1" to 3" •
Malleable iron head • Steel handle
Versatile combination tool •
Spanner fits pin lugs or
rocker lugs to 2½” • Hydrant
wrench accommodates 1c”
pentagonal hydrant nut • Also incorporates
shutoff key, pry bar, and hammer head •
Manganese bronze
Fig. No.
44603 . . . . . . . . . . . . . . Adjustable Hydrant Wrench
Fig. No.
44610 . . . . . . . . . . . . . . . . . . . . . . . . Knott Spanner
Heavy Duty Hydrant Wrench
Fits pentagonal or
square hydrant wrench
to 1¾” • Spanner hook fits
pin lugs or rocker lugs from 1" to 3"
• Ductile iron head • Steel handle with
knurled grip
All Purpose Spanner
Fits ¾” thru 6" pin lugs, rocker lug, slot-type, or
split lug couplings • Gas
cock shutoff slot • Overall
length 10½” • Al-Mag 35 Alloy
Fig. No.
44641 . . . . . . . . . . . . . Heavy Duty Hydrant Wrench
Fig. No.
44620 . . . . . . . . . . . . . . . . . . . All Purpose Spanner
Deluxe Hydrant Wrench
Storz Hydrant Wrench
Fits pentagonal or
square hydrant wrench
to 1¾” • Spanner hook
fits pin lugs or rocker lugs
from 1" to 3" • Ductile iron head • f”
steel handle with knurled grip • Bright zinc
plated
Fits pentagonal hydrant nuts to 1f” and square
hydrant nuts to 1½” • Combination spanner
head fits pin lugs or rocker lugs
from ¾” to 6"
plus 4" thru 6"
Storz couplings • Overall length 25"
Fig. No.
44621 . . . . . . . . . . . . . . . . . . Storz Hydrant Wrench
Fig. No.
44642 . . . . . . . . . . . . . . . . . Deluxe Hydrant Wrench
Five Hole Hydrant Wrench
Fits five common hydrant
nut sizes to 1¾” • Spanner
fits pin lugs or rocker lugs
up to 4" • Cast brass
Fig. No.
44605 . . . . . . . . . . . . . . . Five Hole Hydrant Wrench
55
Tools
Common Spanners
Folding Pocket Spanners
Fits standard pin lug couplings
or swivel adapters • Plated
malleable iron
Fits pin lugs or rocker lugs to 4" •
Folding design minimizes storage
space required • Available in die
cast zinc or brass
Fig. No.
Size
44601 (SWP-150) . . . . . . . . . . . . . . . . . . . . . . . . 1½”
44602 (SWP-250) . . . . . . . . . . . . . . . . . . . . . . . . 2½”
Fig. No.
Description
44609
44619
Folding spanner, die cast zinc
Folding spanner, brass
Universal Spanner
Fits pin lugs or rocker lugs
up to 4" • Cast aluminum •
Gas cock shutoff •
Window jimmy
Gaskets
Used to seal female threaded
swivels, adapters, and caps •
Resilient synthetic rubber •
Sized for fire hose threads
Fig. No.
44605 . . . . . . . . . . . . . . . . . . . . . Universal Spanner
Fig. No.
44502 . .
44504 . .
44506 . .
44507 . .
44508 . .
44510 . .
44511 . .
Combination Spanners
Fits pin lugs or rocker lugs up
to 4" • Cast aluminum •
Gas cock shutoff •
Hydrant wrench
Fig. No.
Fits Hydrant Nut
44607
44608
1¼” Square
1½” Pentagonal
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Size
. 1"
1½”
. 2"
2½”
. 3"
. 4"
4½”
Breakable Padlocks
Used to secure hose houses or
post indicator valves and
discourage tampering • Sharp
blow from a hammer or
spanner wrench breaks
shackle • Available in two
styles: brass lock casing with
steel shackle or laminated steel case with steel
shackle • Keyed alike
Universal Post Indicator Wrench
Universal replacement for use
with UL/FM indicator posts made
by most manufacturers • Forged
steel • Red enamel finish
Fig. No.
69999 . . . . . . . . . . . . . . . . . . Universal PIV Wrench
Fig. No.
68997 . . . . . . . . . . . . . . . Breakable Padlock, Brass
68998 . . . . . . . . . . . . . . . . Breakable Padlock, Steel
Hose & Ladder Strap
Simplifies hose carrying and
use on ladder • Nylon strap •
Plated malleable iron fittings
Fig. No.
44606 . . . . . . . . . . . . . . . . . . . Hose & Ladder Strap
56
Tools
Bolt Cutters
Fire Axes
Cuts concrete
reinforcing rods, soft
bolts, rivet bars, chain •
Tubular steel handles • Insulated
rubber grips
Used for forcible entry
and cutting • Heat
treated forged carbon steel head
Cutting Capacity
Fig. No.
69101
69102
69103
Length
18"
24"
30"
Steel
Copper
0.25"
0.31"
0.38"
0.38"
0.43"
0.50"
Fig. No.
Size
Style
Handle
69123
3½ lbs.
Flathead
34" Fiberglass
69124
69125
6 lbs.
6 lbs.
Pickhead
Pickhead
36" Hickory
34" Fiberglass
Wrecking Bars
Forged hexagonal tool
steel • Slotted claw •
Beveled chisel
Sledgehammers
Used for forcible entry •
Heat treated forged
carbon steel head • Nonconductive fiberglass handle
Fig. No.
Head
Handle
69111
69112
69113
8 lbs.
10 lbs.
12 lbs.
34"
34"
34"
Fig. No.
69151 . .
69152 . .
69153 . .
69154 . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Size
18"
24"
30"
36"
Playpipe Holder
Crowbars
Used with Underwriters
playpipe • Black
painted steel • Leather
strap • Foot disc • Overall length 49"
Basic forcible entry
tool • Forged steel
with pinch point
Fig. No.
57312 . . . . . . . . . . . . . . . . . . . . . . . Playpipe Holder
Fig. No.
Length
Bit
69141
69142
69143
69144
36"
48"
51"
60"
f”
1"
1c”
1¼”
Utility Lantern
Used with hose and equipment
houses • High density
polypropylene • Heavy duty
on/off switch • Uses one 6 volt
lantern battery (not included)
Fig. No.
18604 . . . . . . . . . . . . . . . . . . . . . . . . . Utility Lantern
57
This Page Intentionally
Left Blank
Appendix
In specifying and applying GMR products, supplemental data is often required to
develop accurate specifications and ensure that the most suitable product is selected.
The reference material presented here is intended to assist in that pursuit.
Our aim in this section is to address specific questions that are frequently raised when
specifying and purchasing interior fire equipment. We do not claim to offer a
comprehensive study of hose and standpipe systems and related equipment. There is a
wealth of reference material available from well regarded sources that may be used as a
guideline, and we encourage you to take advantage of those sources. For your
convenience we have listed a number of them on page A12.
GMR recognizes the authority having jurisdiction and recommends the standards they
set relating to the products described in this catalog.
Reference
See Page(s)
Metal Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2
Cabinet Materials & Trim Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
Cabinet Door Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A4
Variations & Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A5
Fire Hose Storage Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A6
Fire Hose Test Pressures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A7
Fire Hose Friction Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A8
Hose House Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A9
Hose Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A10
Conversion Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A11
Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A12
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A12 – A13
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A14 – A15
A1
Metal Finishes
Cabinets
Valves & Connections
Steel – Cold rolled mild carbon steel with white
polyester powder coating (except where noted),
electrostatically applied and thermally fused at
390° F. Dry film thickness of approximately 3
mils, 1000 hours salt spray resistance. Our
standard polyester powder coat may be used
as a prime or finish coat. Red polyester powder
coating is available as an option for a nominal
charge.
Brass & Bronze – Cast or forged brass or cast
bronze with rough finish as manufactured. May
be combined with any of the optional finishes
described below.
Note: The terms “brass” and “bronze” are used
in this catalog to identify in general terms the
various alloys used to manufacture our valves,
connections, and various component parts.
Bronze castings, brass forgings, or machined
brass sheets are among the materials used. If
you require specific identification by ASTM or
UNS number please contact our office.
Polyester powder coat finishes are also
available in a wide range of colors. Contact
GMR for complete information and color
samples. A set-up charge may apply on colors
that are considered non-standard.
Other types of coatings including urethanes,
epoxies, and hybrids are available. Contact
GMR for further information.
Aluminum – Type 5052H32 aluminum with
bronze anodized finish or red polyester powder
coat finish as described above. Optional
powder coat finishes or color anodizing are
available as options.
Stainless Steel – Type 304 stainless steel with
No. 4 brushed finish. No. 32 polished finish is
available as an option.
Stainless Steel – Type 304 stainless steel with
No. 4 brushed finish. No. 32 polished finish is
available as an option.
Paint finishes as described above may also be
applied to stainless steel.
Polished Brass – Mirror finish machine applied
to rough brass. To specify, add suffix -PB.
Aluminum – Type 5005H14 aluminum with
clear anodizing to minimize rust and oxidation.
Color anodizing is available by special order.
Rough Chrome – Copper-nickel chrome
applied to rough brass. To specify, add suffix RC.
Polished Chrome – Copper-nickel chrome
applied to polished brass. To specify, add suffix
-PC.
Other Finishes – Contact GMR for availability
of other finishes.
A2
Cabinet Materials & Trim Styles
Semi-Recessed – Used where the wall is too
shallow to accept a completely recessed
cabinet. A portion of the box projects beyond
the finished wall. The cabinet trim surrounds
the box, and returns to the finished wall,
concealing the wall cut-out. The trim projection
occupies a portion of the traffic area. This type
of mounting increases visibility of the cabinet.
When the trim projection is 4" or less this style
meets the requirements of the Americans with
Disabilities Act (ADA) of 1990.
Cabinet Material
Steel – The most widely used material.
Regularly furnished with a white polyester
powder coat that may be used as a prime or
finish coating. Steel will accept any color to
achieve the desired architectural effect, and
has the added practical advantage of being the
least expensive material available.
Aluminum – The natural brushed appearance
of aluminum provides a visually appealing
installation. A clear anodized finish is standard,
with various color options available. Aluminum
is a good choice when added corrosion
resistance is required at a moderate cost.
Surface Mount – Used primarily in remodeling
situations or commercial/industrial applications.
The cabinet is secured to the finished wall
surface or independently suspended.
Corner Mounting – This is a variation of
surface mounting. The cabinet is constructed
with a triangular box that fits into a corner
location, making maximum use of the available
space. The cabinet is secured to the finished
wall in the same manner as surface mount
cabinets. This type of mounting is available only
on our 13400 series fire extinguisher cabinets.
Stainless Steel – Provides superior corrosion
resistance. Often specified where appearance
is a consideration. The standard finish is a No.
4 brushed finish.
Cabinet Trim Styles
Cabinet trim style, or mounting, is determined
by several variables including wall depth,
construction material, finished wall material,
cabinet location, and piping arrangement. The
following styles are available:
Free Standing – This is also a variation of
surface mounting. The cabinet is furnished with
a provision for free standing installation, which
may consist of legs or a fabricated steel base.
The height and method of securing the cabinet
to the mounting pad are determined on a caseby-case basis.
Recessed – This is the most widely used
mounting style where available wall depth and
the piping arrangement will accommodate the
complete cabinet. The flat trim neatly conceals
the wall cut-out and provides minimal intrusion
into traffic areas.
Trimless – This is a variation of recessed
mounting, used where flush installation with the
finished wall is required. Available wall depth
must accommodate the complete cabinet plus
door & trim. A ¾” plaster flange is provided in
place of the standard trim. The cabinet must be
installed as a complete unit with trim behind the
finished wall.
A3
Cabinet Door Styles
The most suitable door style for any given
cabinet is usually determined by its location.
For example, a cabinet located in the corridor of
an office building or hospital in many cases
would have a full glass door. However, that
same door style would not be practical in a
parking garage or college dormitory. The
authority having jurisdiction should be
consulted if there is any doubt as to the proper
door style. In many instances there is no code
requirement, and the architect or owner will
determine the door style that is used.
Safety Lock – This option may be combined
with any of the preceding door styles for a
secure, tamper-resistant installation. Specifying
the safety lock feature provides a keyed-alike
cylinder lock with break off tab. Opening the
door requires only a sharp tug on the pull
handle. Casual tampering or vandalism is
effectively discouraged, while allowing full
access to fire safety equipment when needed.
Note: “Traditional” break glass style doors with
single strength breakable glass panels have
been discontinued effective March 1, 2006 and
are no longer available.
The following information may be used as a
guide to assist the specifier in selecting the
most suitable cabinet door style.
Glazings – The standard glazing on all door
styles, with the exception of solid panel, is clear
.06" acrylic.
Full Glass – This style is generally used in
private businesses, hotels, and other locations
where the general public’s access is limited and
traffic is light. The full glass opening allows
easy identification of the cabinet’s contents.
Numerous optional glazings are available to
achieve nearly any desired architectural effect.
These include:
Solid Panel – Used where complete
concealment of the cabinet’s contents is
desired. The door is flush with the trim,
providing a flat, uninterrupted appearance.
Specifying this door style with heavier gauge
construction and institutional locks provides
added security in prisons, mental institutions,
and similar facilities.
Duo Panel – This door style is a popular
alternative to full glass. One third (a) of the
door has a glass opening to allow identification
of the cabinet’s contents; the remaining twothirds ( b) of the door is flush solid metal. The
glass opening can be positioned horizontally in
the upper portion of the door, or centered top to
bottom. The opening can also be positioned
vertically. Note: Doors with horizontal
opening in the upper position are not
reversible. Left hand or right hand hinging
must be specified when ordering.
A4
•
Plate Glass
•
•
Tempered Glass
Tinted Acrylic
•
•
Tinted Glass
Wire Glass
•
Mirror Glass
Variations & Identification
Double Doors – This allows access to either
the hose rack unit or fire extinguisher
individually when specified on 14400, 14500, or
14600 series cabinets. This variation also
reduces the radius of door swing into the
corridor.
Variations
Our standard cabinets can be modified to
include any number of variations. Some of them
are described here. Please note that not all
features can be combined.
Concealed Hinge – Provides complete
concealment of the cabinet trim and hinge by
means of an oversized door. This variation is
used most often with solid panel or vertical duo
panel doors. When the door is closed the only
part of the cabinet that is visible is the door,
giving the illusion that the cabinet has been
“hung” on the wall rather than recessed into it.
Contact GMR for submittal and detail sheets.
Duplex Construction – This variation provides
access to the cabinet from both sides of a wall
or partition. A second door & trim is provided,
and the box is custom built to match available
wall depth. The knockout location(s) must be
specified at the time of ordering.
Horizontal Fold – Used to provide storage of
single jacket rubber lined hose without the need
for a rack or reel. Retaining panels and a
curved hose bed are used to hold the hose in
place in the cabinet and allow quick deployment
when needed.
The variations described represent only a few
of the special features we can provide. In may
cases we can modify one of our standard
products to meet your requirements. If not, we
can fabricate cabinets from your drawings or
we will work with you to develop a working
design for a custom cabinet that will meet your
particular needs.
Weatherproofing – Generally used with
surface mount cabinets that are installed in
exposed locations. The door jamb is provided
with a self-adhesive synthetic rubber gasket
and a rainhood is installed over the door to
direct rainfall away from the cabinet.
Identification
Our standard cabinet identification is a wetapplication decal or self-adhesive vinyl label
with red lettering as appropriate (“FIRE
EXTINGUISHER”, “FIRE HOSE”, etc. etc.). A
number of optional identification techniques are
available, including:
Louvers – Provides ventilation for cabinets
installed outdoors. These are normally located
on the sides of the cabinets, but may also be
located on the door. Louvers can be provided
with screens inside the cabinets to discourage
the entry of insects and debris. Vents and/or
weep holes can also be provided.
•
Vinyl Lettering
Special Cabinet Depth – Used when standard
cabinet depth cannot accommodate required
equipment. A setup charge plus a price add-on
per inch of added depth applies. Specify depth
required and knockout locations.
•
Silk Screening
•
Plaques & Nameplates
•
Individual Metal Letters
•
Sandblasting
Full Break Glass Door – This variation
provides a full glass panel door with a keyedalike cylinder lock. Single strength tempered
glass is provided in place of the standard
double strength glass. Note: This combination
of door style and locking feature is
prohibited by most authorities having
jurisdiction.
•
Acid Etching
•
Stenciling
•
Hand Painting
A5
Fire Hose Storage Devices
GMR offers a complete selection of fire hose
storage devices, including racks, reels, and
hangers. Each type of storage device is
designed for use with specific types of fire
hose, and hoses are not always
interchangeable. For example, double jacket
hose will not work on a pin rack; neither will
hose designed for continuous flow hose reels.
The chart below may be used as a guideline in
selecting the most suitable combination of fire
hose and hose storage device.
Hose Storage Device
Important Note: Continuous flow hose reels
are sometimes used to store flat-folding hose.
In those instances, all hose must be removed
from the reel before the hose valve is opened.
Failure to do so will result in damage to the reel
and will void our warranty.
Single
Jacket
Rack &
Reel
Double
Jacket
Non-Collapsible
Hose
U
Semi-Automatic Pin Racks
Swinging Hose Reels
U
U
U
Hump Racks
U
U
U
Saddle-Type Hose Racks
U
U
U
Carts & Trailers
U
U
U
U
Continuous Flow Hose Reels
A6
Fire Hose Test Pressures
Fire hoses are subjected to various pressure
tests to determine their reliability. Hose is
frequently identified by its proof test pressure,
also known as acceptance test pressure. Proof
test pressures are indicated for all fire hoses in
this catalog, except as noted. With the
exception of non-collapsible hose, all hose is
marked with its service test pressure as per
NFPA 1961 requirements.
Note: Non-collapsible hose is rated according
to standards established by the Rubber
Manufacturers Association (RMA), which
involve measurements of working pressure and
bursting pressure. For this type of hose, the
maximum working pressure is 25% of the
minimum bursting pressure. For example, a
hose rated for a 150 PSI working pressure will
have a minimum bursting pressure of 600 PSI.
This a commonly expressed as a “4:1 safety
factor” (600 ÷ 150 = 4). Maximum working
pressure is indicated for all non-collapsible
hose shown in this catalog.
The chart below shows typical proof test ratings
for our flat folding fire hoses and the
corresponding maximum working pressure,
service test pressure, and burst test pressure.
Test Pressures – PSI
Hose Type
Sizes
Proof
Service
Burst
Single Jacket
1½” & 2½”
300
500
150
250
500
750
Double Jacket
1½” & 2½”
600
800
300
400
900
1200
Rack & Reel
1½” & 2½”
500
250
750
Nitrile Rubber Covered
1½” & 2½”
500
250
750
A7
Fire Hose Friction Loss
When water flows through fire hose, there is
always a loss of pressure. This pressure loss is
created by the friction between the moving
water and the lining of the fire hose, as well as
friction between the water particles.
Friction Loss Coefficients:
¾”
–
1100
1"
–
150
1½”
–
24
1¾”
–
15.5 (with 1½” couplings)
2"
–
8 (with 1½” couplings)
2½”
–
2
Friction loss in rubber lined fire hose can be
calculated using the formula FL = CQ2 L.
Example:
What is the friction loss at 125 GPM in a length
of 1½" x 50' hose?
Where:
FL
C
Q
L
=
=
=
=
Friction loss in PSI
Friction loss coefficient
Flow rate in hundreds of GPM
Hose length in hundreds of feet
24 x 1.252 x 0.5 = 18.8 PSI
Note: Actual pressure loss may vary,
depending on the age and condition of the
hose.
Friction Loss in PSI per 100' of Rubber Lined Hose
Flow in GPM
¾”
1"
1½”
2½”
10
15
20
25
13.5
29.0
50.0
75.0
3.5
7.2
12.3
18.5
0.3
0.7
1.2
1.9
—
—
—
—
30
35
40
45
105.0
140.0
—
—
26.0
35.0
44.0
55.0
2.5
3.4
4.3
5.4
—
—
—
—
50
60
70
80
—
—
—
—
67
—
—
—
7.1
9.7
12.3
16.1
1.2
1.4
1.7
1.9
90
100
125
150
—
—
—
—
—
—
—
—
20.0
25.5
36.8
50.0
2.2
2.5
4.1
5.8
175
200
225
250
—
—
—
—
—
—
—
—
—
—
—
—
7.9
10.1
12.0
15.0
A8
Hose House Equipment
GMR’s outdoor hose and hydrant houses are
designed for installation adjacent to or over a
fire hydrant, and will accommodate a complete
selection of approved equipment. Several
factors, including the type of hazard and the
authority having jurisdiction will govern the
selection of equipment.
The two most common lists of equipment that
conform to insurance requirements are
published by Industrial Risk Insurers (IRI) and
Factory Mutual (FM). These lists are
reproduced below.
Fig. No.
Item
IRI
FM
39101
39103
1½” x 50' single jacket hose coupled brass NST . . . . . . . . . . .
2½” x 50' single jacket hose coupled brass NST . . . . . . . . . . .
Note 1
Note 1
2
4
57107
57152
57311
57312
2½” adjustable brass fog nozzle . . . . . . .
1½” adjustable polycarbonate fog nozzle
Underwriters playpipe . . . . . . . . . . . . . . .
Playpipe holder . . . . . . . . . . . . . . . . . . . .
.
.
.
.
—
—
2
1
2
1
Note 2
—
43103
74121
2½” x 1½” reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2½” x 1½” x 1½” leader line wye . . . . . . . . . . . . . . . . . . . . . . .
—
—
1
1
18604
44504
44507
44601
44602
44603
44606
68997
69124
69143
All purpose lantern . . . . . .
1½” hose gasket . . . . . . . .
2½” hose gasket . . . . . . . .
1½” common spanner . . .
2½” common spanner . . .
Adjustable hydrant wrench
Hose & ladder strap . . . . .
Breakable padlock . . . . . .
Fire axe . . . . . . . . . . . . . .
Crowbar . . . . . . . . . . . . . .
Note 3
Note 3
2
—
4
1
2
Note 3
1
1
Note 3
Note 3
—
2
4
2
—
Note 3
—
—
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
NOTES:
1.
2.
3.
Sizes and quantity of hose depends on local authority having jurisdiction.
FM’s only requirement is that a sufficient number of playpipes for conducting tests be provided. Consult
with the local authority having jurisdiction.
These items are not required by IRI or FM, but are frequently required by the local authority having
jurisdiction.
A9
Hose Threads
The hose threads in the accompanying tables
are the most commonly used threads.
However, we can supply almost any distinct or
special thread you may require. Contact us for
additional information.
Chemical Hose Thread
National Standard Thread
Size
ODM
TPI
¾”
1"
1½”
2"
2½”
3"
4"
4½”
5"
6"
1.3750"
1.3750"
1.9900"
2.5156"
3.0686"
3.6239"
5.0109"
5.7609"
6.2600"
7.0250"
8
8
9
8
7½
6
4
4
4
4
ODM
TPI
¾”
1"
1¼”
1½”
2"
2½”
3"
4"
4½”
5"
6"
1.0353"
1.2951"
1.6399"
1.8788"
2.3582"
2.8410"
3.4670"
4.4660"
4.9850"
5.5281"
6.5848"
14
11½
11½
11½
11½
8
8
8
8
8
8
ODM
TPI
¾”
1"
1¼”
1½”
2"
2½”
1.0625"
1.3125"
1.8600"
2.1000"
2.5500"
3.0350"
11
11½
11
11
10
7½
TPI
¾”
1"
1.3750"
1.3750"
8
8
Size
ODM
TPI
1½"
2.1875"
12
Garden Hose Thread
Size
ODM
TPI
¾”
1.0625"
11½
Canadian Standards Association
Size
ODM
TPI
2½”
3.1250"
5
U.S. Navy Thread
Pacific Coast Thread
Size
ODM
Underwriters Tip Thread
National Pipe Straight Hose
Size
Size
A10
Size
ODM
TPI
¾”
1"
1¼”
1½”
2"
2½”
3"
4"
1.0625"
1.2951"
1.6399"
1.8788"
2.3582"
3.0686"
3.6239"
4.9082"
11½
11½
11½
11½
11½
7½
6
6
Conversion Tables
Pressure Equivalents
PSI
kg/cm²
kPa
bar
1
0.07031
6.89476
0.06895
14.223
1
98.0665
0.980665
kPa
0.145038
0.010197
1
0.01
bar
14.5038
1.01972
100
1
m³
ft³
Gallons
Liters
m³
1
35.3147
264.172
1000
ft³
0.028317
1
7.48052
28.31687
Gallons
0.003785
0.13368
1
3.7854
0.001
0.03531
0.26417
1
lbs.
kgs.
oz.
g
lbs.
1
0.45359
16
453.592
kgs.
2.2046
1
32.15
1000
oz.
0.0625
0.02834
1
28.349
0.00205
0.001
0.3527
1
PSI
kg/cm²
Volume Equivalents
Liters
Weight Equivalents
g
Linear Equivalents
in
mm
ft
cm
m
in
mm
ft
cm
m
1
25.4
0.83
2.54
0.025
0.03937
1
0.00328
0.1
0.001
12
304.8
1
30.48
0.3048
0.3937
10
0.0328
1
0.01
39.37
1000
3.281
100
1
A11
Resources • Abbreviations
Resources
Abbreviations
National Fire Protection Association
Adj
AFFF
ANSI
Adjustment or adjustable
Aqueous film-forming foam
American National Standards
Institute
ARC
Alcohol resistant concentrate
ASTM
American Society for Testing
and Materials
AUTO
Automatic
AUTO SPKR Automatic Sprinkler
Fire Protection Handbook
1
Fire Prevention Code
10
Portable Fire Extinguishers
13
Installation of Sprinkler Systems
14
Installation of Standpipe and Hose
Systems
20
Installation of Centrifugal Fire Pumps
24
Installation of Private Fire Service Mains
and Their Appurtenances
25
Inspection, Testing, and Maintenance of
Water-Based Fire Protection Systems
1961 Fire Hose
1962 Care, Use, and Service Testing of Fire
Hose Including Connections and
Nozzles
1963 Fire Hose Connections
1964 Spray Nozzles (Shutoff and Tip)
Underwriters Laboratories
Fire Protection Equipment Directory
19
Lined Fire Hose and Hose Assemblies
47
Semiautomatic Fire Hose Storage
Devices
219
Lined Fire Hose for Interior Standpipes
312
Check Valves for Fire Protection
Service
385
Play Pipes for Water Supply Testing in
Fire Protection Service
401
Portable Spray Hose Nozzles for Fire
Protection Service
405
Fire Department Connections
668
Hose Valves for Fire Protection Service
1468 Direct-Acting Pressure Reducing and
Pressure Restricting Valves
Factory Mutual
Approval Guide
Other Sources
Private Fire Protection and Detection
(International Fire Service Training Association)
A12
CHT
cm
Conn.
CO2
CSFM
Chemical Hose Thread
Centimeter
Connection
Carbon dioxide
California State Fire Marshal
D
DC
Dept.
dia.
DJRL
DOT
Depth
Direct Current
Department
Diameter
Double Jacket Rubber Lined
Dept. of Transportation
Eqpt.
Extg.
Equipment
Extinguisher
F
FD
FEMA
FxF
Fig.
FxM
FM
ft
ft3
Fahrenheit
Fire department
Fire Equipment Manufacturers
Association
Female x Female
Figure
Female x Male
Factory Mutual
Foot or feet
Cubic feet
g
ga.
gal.
GHT
GPM
Gram
Gauge
Gallon
Garden Hose Thread
Gallons Per Minute
H
Height
Abbreviations
i.d.
in.
IPS
IRI
Inside diameter
Inch
Iron Pipe Size
Industrial Risk Insurers
kg.
kg./cm²
kPa
Kilogram
Kilograms per square centimeter
Kilopascal
L
LPM
lb.
Liter
Liters per minute
Pound
m
MxM
m3
max.
min.
mm
Meter
Male x Male
Cubic meters
Maximum
Minimum
Millimeter
NAFED
National Association of Fire
Equipment Distributors
National Fire Protection
Association
National Hose Thread
Number
National Pipe Straight Hose
thread
National Pipe Thread
Non-rising stem
National Standard Thread
NFPA
NHT
no.
NPSH
NPT
NRS
NST
o.d.
ODM
OSHA
OS & Y
oz.
Outside diameter
Outside diameter of male
Occupational Safety and Health
Administration
Outside screw and yoke
Ounce
pg.
P/L
PSI
PSIG
Page
Pin lug
Pounds per square inch
Pounds per square inch, gauge
Ref.
R/L
RMA
Reference
Rocker lug
Rubber Manufacturers
Association
Rising Stem
RS
A13
Sch.
Sec.
SJRL
SPDT
sq.
Schedule
Section
Single Jacket Rubber Lined
Single Pole Double Throw
Square
TPI
Typ.
Threads per inch
Typical
UL
ULT
USCG
Underwriters Laboratories
Underwriters Laboratories
Thread
United States Coast Guard
VAC
VDC
Volts - Alternating Current
Volts - Direct Current
W
wt.
Width
Weight
"x"
By
Glossary
Adapter – Any device that allows fire hose
couplings to be interconnected with couplings
of different sizes, threads, or mating surfaces.
Double Jacket – A hose construction
consisting of two woven jackets over a
synthetic lining.
Angle Valve – A type of globe valve used
primarily as a hose valve.
Dry Chemical – A mixture of fine powders that
extinguishes fire by interfering with the
combustion chain reaction.
Booster Hose – A hose having a rubber tube,
a braided or spiral reinforcement, and an outer
protective cover. Normally used on continuous
flow hose reels.
Dry Standpipe – A standpipe system designed
to have piping containing water only when the
system is in use.
Burst Pressure – The pressure at which hose
ruptures.
Fire Department Connection – A connection
through which the fire department can pump
water into a sprinkler or standpipe system.
Cabinet – An enclosure, usually constructed of
steel, that contains hose rack assemblies,
Class I, II, or III fire department valves, fire
extinguishers, or various combinations of these.
Fire Extinguisher – A portable device
containing an extinguishing agent that can be
expelled under pressure for the purpose of
extinguishing a fire.
Carbon Dioxide – Gaseous extinguishing
agent that extinguishes fire by displacing
oxygen.
Fire Hose – A flexible conduit constructed with
one or more woven jackets and an approved
nonpermeable lining.
Check Valve – A valve designed to prevent
reverse water flow.
Fire Hydrant – A connection to a water main
for the purpose of supplying water to fire hoses
or other fire protection apparatus. Also see Wall
Hydrant.
Class A Fires – Fires in ordinary combustible
materials, such as wood, cloth, paper, rubber,
and many plastics.
Flow Rate – A volume of fluid per unit of time
passing a given cross-section of a flow passage
in a given direction.
Class B Fires – Fires in flammable liquids, oils,
greases, tars, oil-base paints, lacquers, and
flammable gases.
Class C Fires – Fires that involve energized
electrical equipment.
Friction Loss – Pressure loss caused by
friction between moving water and the interior
surface of a hose or pipe.
Class D Fires – Fires in combustible metals,
such as magnesium, titanium, zirconium,
sodium, lithium, and potassium.
Gate Valve – A straightway valve with a wedge
disc designed for use as an isolating or end-ofline hose valve.
Coupling – One set/pair of connection devices
attached to a fire hose that allows the hose to
be interconnected to other hoses or fire fighting
appliances.
Gauge – Thickness of the steel used to
manufacture cabinets. The lower the gauge, the
thicker the material.
A14
Glossary
Globe Valve – A straightway or angle-pattern
valve with a soft seating surface designed for
use as a hose valve.
Pressure Restricting Device – A valve or
device that reduces downstream water
pressure under residual (flowing) conditions
only.
Hose House – An enclosure located over or
adjacent to a hydrant or other water supply,
designed to contain hose, nozzles, and tools for
use by fire fighting personnel.
Proof Test – A non-destructive test applied to
fire hose to determine its reliability. Proof test
pressure is double the service test pressure.
Hose Nozzle – A device intended for
discharging water for manual suppression or
extinguishment of a fire.
Reducer – See adapter.
Service Test – A test in which the fire hose is
tested under actual working conditions.
Hose Rack – A device used to store folded fire
hose.
Siamese – See fire department connection.
Hose Reel – A circular device used to store fire
hose.
Single Jacket – A hose construction consisting
of one woven jacket over a synthetic lining.
Hose Station – A combination of a hose rack
or reel, hose nozzle, hose, and hose valve.
Swivel Gasket – A gasket used in a female
threaded connection to provide a watertight
seal between the male and female connections.
Hose Valve – The valve to an individual hose
connection.
Tail Gasket – A gasket in the bowl of a
coupling used to provide a watertight seal
between the coupling and hose in an expansion
ring-type coupling.
Jacket – The exterior woven textile
reinforcement of a fire hose.
Lining – The innermost part of a hose,
comprised of a continuous synthetic rubber or
thermoplastic tube.
Wall Hydrant – A hydrant mounted on the
outside of a wall of a building, fed from interior
piping, for the purpose of supplying water to fire
hoses.
Monitor Nozzle – A device specifically
designed with a large, clear waterway to
provide a powerful, far-reaching stream.
Wet Standpipe – A standpipe system having
piping containing water at all times.
Nipple – See adapter.
Polymer Coating – A protective coating
applied to woven jacket fire hose in liquid form.
Pressure Regulating Device – A valve or
device that reduces downstream water
pressure under static (non-flowing) and residual
(flowing) conditions.
A15
This Page Intentionally
Left Blank