TYPE A
76
STANDARD STRIP
T5 | T8
SUBMITTAL:
JOB:
VOLTAGE:
TYPE:
76
EXAMPLE
▼
SERIES
-
4
▼
-
2 32
-
OP TIONS
▼ ▼
-
▼
NOMINAL TOTALWATTAGE/
OPTIONS
LENGTH LAMPSTYPE
E B2
-
▼
BALLAST
TYPE
UNV
▼
VOLTAGE
FEATURES
SPECIFICATIONS
Hinging/locking lamp brackets and factory-mounted, prewired
sockets reduce installation time.
XX
Available in 2’, 3’, 4’, 6’, and 8’ lengths.
XX
Channel connector furnished for continuous row applications
(included with 8’ units only).
XX
Quarter-turn fastener secures wireway cover to housing.
XX
Special reflectors are available for precise light distribution.
XX
Ballast secured by two captive bolts and nuts to ensure a tight,
reliable fit for maximum heat dissipation.
XX
This fixture is proudly made in the USA.
XX
2”
3-5/8”
4-1/4”
ORDERING INFORMATION
SERIES
OPTIONS
76
Standard Strip
NOMINAL LENGTH
2
3
4
6
8
2’
3’
4’
6’
8’
ACCESSORIES
TOTAL LAMPS
1, 2, 3, 4, or 6
(1-, 2-, or 3-lamp cross-section)
LAMP WATTAGE/TYPE
17
24T5H
25
28T5S
32
54T5H
59
86
For generic EM ballast options (must specify voltage), see
Fluorescent Information section.
ALUM
.032” thick aluminum fixture, painted after
fabrication
2’, 17-watt T8
2’, 24-watt T5HO
3’, 25-watt T8
4’, 28-watt T5
4’, 32-watt T8
4’, 54-watt T5HO
8’, 59-watt T8
8’, 86-watt T8 (1- or 2-lamp cross-section)
See back for special reflectors, ordered separately.
See Fluorescent Information section for mounting accessories.
WG-7611 11-gauge white powder coat wireguard
WG-7614 14-gauge white powder coat wireguard
BALLAST TYPE
See Information section for complete ballast offering.
EB1
1-lamp electronic ballast
EB2
2-lamp electronic ballast
EB3
3-lamp electronic ballast
EB4
4-lamp electronic ballast
EB4/2
(1) 4-lamp and (1) 2-lamp electronic ballast
VOLTAGE
120
277
UNV
347
120V
277V
120-277V
347V
H.E. Williams, Inc. Carthage, Missouri w w w.hewilliams.com 417-358-4065 Fax: 417-358-6015
June 7, 2013
Housing – 22-gauge
die-formed C.R.S.
Finish – 92% minimum
average reflective white
polyester powder coat
bonded to phosphate-free,
multi-stage pretreated
metal. All parts painted
after fabrication to
facilitate installation,
increase efficiency,
and inhibit corrosion.
Electrical – Electronic
ballast standard, instant
start T8, program start
T5, rated Class P.
Mounting – Surface
or suspended.
Labels – UL/CUL listed
as fluorescent luminaire
suitable for dry or
damp locations.
Strips
Page 10A
76
SPECIAL
REFLECTORS
Reflectors are ordered
separately. For additional
styles, see Fluorescent
Information section.
Note: Drawings represent
reflector style. Actual
cross-section will vary
depending on fixture/lamp
configuration.
Example: R1172-4-76 REFL
R1172
R1240
PHOTOMETRY
Catalog #: 76-4-232-EB2
TEST REPORT
INFORMATION
XX
Test Report #: 8591.0
XX
Date: 12/27/95
XX
Lamp Type: F32T8/
SPX35/RS
XX
Lamp Quantity: 2
180° 170°
160°
CANDLEPOWER DISTRIBUTION
150°
140°
130°
120°
110°
0°
45º
90º
50°
40°
10°
0°
20°
30°
LUMEN SUMMARY
Zone
Lumens
0 - 30
951.
0 - 40
1603.
0 - 60
3107.
0 - 90
4752.
90 - 120
844.
90 - 130
981.
90 - 150
1064.
90 - 180
1066.
Total Luminaire:
0 - 180
5818.
% Lamp
16.1
27.2
52.7
80.5
14.3
16.6
18.0
18.1
98.6
% Fixture
16.3
27.5
53.4
81.7
14.5
16.9
18.3
18.3
100.0
Total Luminaire Optical Efficiency: 98.6%
IES Spacing Criteria: Across = 1.6, Along = 1.3
0º
45º
90º
0º
1128.
1128.
1128.
5º
1135.
1135.
1142.
108.4
327.3
Ceiling
.80
.70
.50
Wall .70 .50 .30 .70 .50 .30 .50 .30 .10
Zonal
Lumens
100°
15º
1120.
1155.
1192.
90°
25º
1033.
1117.
1191.
515.1
80°
35º
897.
1044.
1166.
651.8
744.2
70°
60°
Horizontal Angle
Vertical
Angle
ZONAL CAVITY COEFFICIENTS
45º
740.
977.
1150.
55º
555.
860.
1093.
759.7
65º
361.
763.
1025.
728.6
75º
171.
597.
761.
566.8
85º
29.
394.
495.
350.2
90º
3.
244.
403.
95º
0.
309.
468.
303.0
105º
0.
323.
574.
321.9
115º
0.
237.
441.
219.0
125º
0.
150.
333.
136.7
135º
0.
68.
200.
63.9
145º
0.
13.
90.
19.2
155º
0.
0.
13.
2.3
165º
0.
0.
0.
.0
175º
0.
0.
0.
.0
180º
0.
0.
0.
Room Cavity Ratio
T5 | T8
STANDARD STRIP
0
1
2
3
4
5
6
7
8
9
10
1.13
1.01
.91
.83
.75
.68
.63
.58
.53
.49
.45
1.13
.96
.82
.72
.63
.55
.49
.44
.39
.35
.32
1.13
.91
.75
.63
.54
.46
.40
.35
.30
.27
.24
1.08
.97
.87
.79
.72
.65
.59
.55
.50
.46
.43
1.08
.92
.79
.69
.60
.53
.47
.42
.38
.34
.31
1.08
.87
.72
.61
.52
.44
.38
.34
.29
.26
.23
1.00
.84
.72
.63
.56
.49
.43
.39
.35
.31
.28
1.00
.81
.67
.57
.49
.41
.36
.32
.28
.24
.22
1.00
.78
.62
.51
.43
.36
.31
.26
.23
.19
.17
Effective Floor Cavity Reflectance = .20
FIXTURE DETAILS
BACK VIEW
R1289
3-1/4”
2”
1-1/8”
1-1/4”
(4) ø7/8” KOs
ø2” KO
4-1/4”
(4) ø1/4” KOs
1-5/8”
5”
24”, 36“, 48”, 72“, or 96”
Note: Center ø2” and ø7/8” KOs are on 4’, 6’, and 8’ units only.
R1320
R1324
Strips
Page 10B
H.E . W illiams, In c.
C ar t hage, Mis s our i
Information contained herein is subject to change without notice.
w w w.h ew illia m s.c om
417- 3 5 8 - 4 0 6 5
F a x : 417- 3 5 8 - 6 015
HEWJP43033 03/17/14JJ
TYPE B1
Shallow profile
aesthetically
pleasing
CSW48
CUBELITE LED
LINEAR SURFACE
LUMINAIRE
and simple to use.
PHILIPS DAY-BRITE / PHILIPS CFI, 4' LENGTH, 4" WIDE,
4 ¾" DEEP SURFACE LUMINAIRE, LED, CS SERIES
Project:
Location:
Smooth opal or prismatic acrylic lens offers a diffused illumination.
Ideal for corridor, stairwell, or vanity applications.
Catalog No:
Fixture Type: Linear Surface Luminaire
Mfg: Philips Day-Brite Lamps: LED
Qty:
Notes:
Ordering guide
CSW48-2835UDZTZO
Series
Length
CSW
CSW Cubelite Surface
Luminaire
48
example: CSW48-4740ULAGZO
Lumens1
Color
Voltage
Driver
Lens
Options
28 2800 lm
47 4700 lm
40 4000 K
35 3500 K
UUniversal
120/277 V
120 120 V
3
347 V
LAGLED driver
DZT0–10 V dimming
SZT100 /40 step dimming
ZO Opal acrylic
VBPrismatic
DBPrismatic
50% DR
B Black Painted housing
9 Tamper Resistant 2
K Pull Chain Right3
L Pull Chain Left3
COConvenience outlet (120V)
–
4848" lamp /
fixture
EMIntegral emergency driver,
1100lm nominal
1. Nominal value.
2. Order TR15 Torx-head screws with DB lens.
3. Pull Chain options K and L are available in 120V only.
Features
Materials
Electrical
• Only 4¾" deep.
• Delivers up to 4700 lm per 4' (nominal) length.
• Individual or continuous row mounting.
• Ideal for corridors, washrooms, storage areas,
and stairwells.
• Can be used in conjunction with occupancy sensors.
• Convenience outlet optional (CO).
• S pring-loaded end cap.
• Long life LEDs provide 50,000 hours of
lumen maintenance free life (L70).
• Can be wall or ceiling mounted.
• Fully enclosed wiring and LED diodes.
• Right (K) or left (L) pull chain options are
available for 120V configurations only.
• W hite painted housing standard.
Black painted (B) housing optional
Chassis parts are die-formed heavy gauge cold
rolled steel.
LED boards and drivers are RoHS (Restriction of
Hazardous Substances) compliant. Predicted L70
lifetime based on LED manufacturer’s supplied LM-80
data and in-situ laboratory testing.
CSW48 07/14 page 1 of 3
Finish
Baked white acrylic enamel, phosphate undercoating.
Lens
Three available lenses with extruded
virgin acrylic diffuser:
- S mooth opal acrylic diffuser (ZO) with 0.060"
thickness and 50% DR content. Provides
maximum comfort from pixelated glare.
- Clear prismatic lens (VB) with 0.125" thickness .
- Prismatic lens (DB) with 50% DR.
Replacement Lenses: LN11665 (4' ZO),
LN16784 (4' VB), LN26214 (4' DB)
Options and Accessories
Continuous Row Mounting:
Order luminaire coupler
CSWCPL (White) or CSBCPL (Black)
Labels
cETLus listed. Suitable for damp locations.
CSW48
CUBELITE LED
LINEAR SURFACE
LUMINAIRE
Dimensions
315/16"
(100mm)
413/16"
(122mm)
48" (1219mm)
CSW48 07/14 page 2 of 3
CSW48
CUBELITE LED
LINEAR SURFACE
LUMINAIRE
2800 lm Performance
Lumen Package: 2800
Report Number1: C12042
Catalog Number: CSW48-2840ULAGZO
Delivered Lumens: 2751
Color: 4000K
Input Watts: 31.0
Efficacy: 88.7 lm/w
Lamp: LED
Luminaire: Cubelite 4' Fixture with (ZO) Opal Lens
CIE Type: Direct
Plane:
0°90°
Spacing Criteria:1.51.5
Plane:
0°90°
Luminous Length:4.000 48.000
1. Tested using absolute photometry as specified in LM79:
IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products.
2. Total efficiency.
Candela Distribution
Coefficients of Utilization
Angle
0.0
45.0
90.0
0
5
15
25
35
45
55
65
75
85
90
95
105
115
125
135
145
155
165
175
180
504
503
485
451
401
339
264
180
91
15
2
2
2
3
3
3
4
4
4
4
5
504
513
519
510
488
451
396
326
246
176
161
159
155
143
125
104
80
53
27
7
5
504
495
511
517
505
476
431
371
301
237
223
219
211
196
175
150
119
83
44
11
5
Zonal Lumens
Ceiling
Wall
49
144
230
296
332
334
299
236
172
150
141
122
98
71
45
23
8
1
80%
70
50
RCR
50%
30
50
30
30%
10
50
30
10
72
60
51
44
38
34
29
26
23
21
69
56
47
40
34
29
25
22
19
17
Zonal Cavity Method
1
2
3
4
5
6
7
8
9
10
Room Cavity Ratio
Catalog No. CSW48-2840ULAGZO
101
91
83
76
69
64
58
54
50
46
96
83
72
64
56
50
45
40
36
33
91
76
63
55
47
41
36
32
28
25
83
71
62
55
49
44
39
35
32
29
79
66
56
48
42
37
32
28
25
22
76
61
51
43
37
31
27
23
20
18
75
64
56
50
44
40
35
32
29
27
Effective Floor Cavity Reflectance = 0.20
Luminance Data in Candela/Sq. Meter
Average in Average
Degrees
0°
45
55
65
75
85
3869.
3721.
3430.
2829.
1417.
Average
45°
Average
90°
5165.
5591.
6245.
7693.
16386.
5450.
6093.
7104.
9408.
22023.
Zonal Lumen Summary2
Zone
0–30
0–40
0–60
0–90
40–90
60–90
90–180
0–180
Lumens
% Luminaire
423
719
1385
2092
1374
708
659
2751
15.38
26.13
50.34
76.06
49.93
25.72
23.94
100.00
4700 lm Performance
Lumen Package: 4700
Report Number1: C12045
Catalog Number: CSW48-4740ULAGZO
Delivered Lumens: 4700
Color: 4000K
Input Watts: 52.1
Efficacy: 90.2 lm/w
Lamp: LED
Luminaire: Cubelite 4' Fixture with (ZO) Opal Lens
CIE Type: Direct-Indirect
Plane:
0°90°
Spacing Criteria:1.51.5
Plane:
0°90°
Luminous Length:4.000 48.000
1. Tested using absolute photometry as specified in LM79:
IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products.
2. Total efficiency.
Candela Distribution
Coefficients of Utilization
Angle
0.0
45.0
90.0
0
5
15
25
35
45
55
65
75
85
90
95
105
115
125
135
145
155
165
175
180
843
841
811
753
670
566
441
300
151
25
2
4
4
5
6
7
8
9
9
10
10
843
858
868
856
821
760
669
554
422
305
281
277
269
249
217
183
140
94
49
14
10
843
830
860
872
856
811
739
639
523
417
392
385
371
345
310
266
212
148
79
21
10
© 2014 Koninklijke Philips N.V. All rights reserved.
Specifications are subject to change without notice.
www.philips.com/luminaires
CSW48 07/14 page 3 of 3
Zonal Lumens
Ceiling
Wall
82
241
386
497
561
565
510
406
298
262
246
214
171
125
80
41
14
2
80%
70
50
RCR
Room Cavity Ratio
Catalog No. CSW48-4740ULAGZO
50%
30
50
30
30%
10
50
30
10
71
60
51
44
38
33
29
26
23
20
69
56
46
40
34
29
24
21
19
16
Zonal Cavity Method
1
2
3
4
5
6
7
8
9
10
101
91
83
76
69
63
58
54
50
46
96
83
72
63
56
50
44
40
36
33
91
75
63
54
47
41
36
32
28
25
82
71
62
55
49
43
39
35
32
29
79
66
56
48
41
36
31
28
25
22
76
61
50
43
36
31
26
23
20
18
74
64
56
50
44
39
35
32
29
26
Effective Floor Cavity Reflectance = 0.20
Luminance Data in Candela/Sq. Meter
Average in Average
Degrees
0°
45
55
65
75
85
6461.
6212.
5721.
4709.
2334.
Average
45°
Average
90°
8711.
9456.
10611.
13169.
28301.
9290.
10441.
12257.
16386.
38736.
Philips Lighting
North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
Zonal Lumen Summary2
Zone
0–30
0–40
0–60
0–90
40–90
60–90
90–180
0–180
Lumens
709
1207
2333
3546
2339
1213
1155
4700
% Luminaire
15.09
25.67
49.63
75.44
49.76
25.81
24.56
100.00
Philips Lighting Company
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008
TYPE C1
CORNER 75 led
h
3“ surface mounted square linear extruded profile made of
aluminium, powder coated white, black or anodized
aluminium. Endcaps made of solid aluminium, available in
different finishes
228
Enhanced glare control through snap in shielding
HPO-High Performance Opal cover for uniform bi-directional
light distribution and increased light transmission at 85 lm/W
and a total light fixture efficiency of η = 83% at 4000K
Light inset made of extruded aluminium with high efficient
98% reflective surface
Use of long life, 50,000 hour high efficient medium power
e LEDs at 80% lumen maintenance (LM 80) with 3.8W/ft or
optional high output performance e2 LEDs with 7.6W/ft
power consumption. Superior color temperature consistency
to a 3-step McAdams ellipse, available in 2700K/CRI >84,
3000K/CRI >84, 3500K/CRI >83 or 4000K/CRI >83
120V | 277V as standard universal input voltage and various
dimming options available
RANGE
MOUNTING
N554
_ _ _ _ - _13
_
LAMPING
ELECTRICAL
SHIELDING
_ - _ _ _ _ -H
_
- _7 _ 1
FINISH
DIMENSION
-_ _
- _0 _ _ _
SERIES
INSTALLATION
TYPE
VOLTAGE
COVER
COLOR
LENGTH (CHANNEL)
CORNER 75 LED
1 _ linear
7 _ _ LED white
H HP opal
MOUNTING
LAMP
3 _ _ _ 120V (DIM 0-10V)
7 _ _ _ 120 | 277V UNV
_ 3 surface mounted
_ 3 _ e LED 3.8W/ft
_ 4 _ e2 LED 7.6W/ft
6 6 anodized
aluminium
7 7 white
7 4 white/chrome
8 8 black
8 4 black/chrome
0225
0345
0465
0690
0805
0925
xxx0
DIMMING
71 _ _
32_ _
7H_ _
7D_ _
no dimming
DIM 0-10V (120V only)
Hi-lume (1%) 3-wire hot dim
Hi-lume (1%) digital dim
for end feed, please
consult factory
For custom lengths
from 23‘‘ to max. 500‘‘
see our light system
configurator at
systems.xalusa.com
COLOR
TEMPERATURE
__4_
__5_
__7_
__6_
22 1/2‘‘ 2‘ LED
34 1/2‘‘ 3‘ LED
46 1/2‘‘ 4‘ LED
69‘‘
3‘+3‘ LED
80 1/2‘‘ 3‘+4‘ LED
92 1/2‘‘ 4‘+4‘ LED
custom length
2700K CRI >84
3000K CRI >84
3500K CRI >83
4000K CRI >83
EMERGENCY
_ _ _ 0 no emergency
_ _ _ # number of 90 min. emergency battery pack
_ _ _C emergency circuit
for emergency battery pack options, please consult factory
10 Business Day QuickShip items
DRAWING
The overall fixture length is the channel length plus 5/8‘‘ in total for two endcaps
SURFACE
2 15/16"
3 5/8"
3 5/8"
FIXTURE LENGTH | CUTOUT CALCULATION
FIXTURE LENGTH
L total =
L channel + 5/8‘‘
L 23 1/8" | 35 1/8" | 47 1/8"
3 5/8"
2 15/16"
L/2 - 1 3/8"
3 5/8"
L 69 5/8" | 81 1/8“
3 5/8"
(L - 7 5/16") x 1/3 + 3 5/8"
(L - 7 5/16") x 1/3
L 93 1/8"
3 5/8"
LIGHT DISTRIBUTION
CORNER 75 opal
180°
η = 83%
150°
120°
Photometric data please see page 346
90°
210 140 70
60°
cd/klm
0°
C0/C180
30°
C90/C270
FINISH
LED ARRAY
66
77
74
88
84
66
77
74
88
84
anod. aluminium
white
white/chrome
black
black/chrome
TYPE D2
ICLSQ60TL
IC-RATED 6” SQUARE TRIMLESS LED DOWNLIGHT
CATALOG #:
TYPE:
PROJECT:
EXAMPLE
LED
NOTES:
ICLSQ60TL
-
t
L15 / 835
t
SERIES
LUMEN
PACKAGE
-
-
NB
t
CRI & CCT
OPTIONS
t
-
DRV
t
MOUNTING
t
OPTIONS
DRIVER
-
120
t
VOLTAGE
FEATURES
Trimless 6” aperture provides crisp, clean installation
For hard pan ceiling applications in new construction
For use in direct contact with insulation
XX
LED module and driver accessible from below ceiling plane for ease
of maintenance
XX
Angular mud ring adjusts for in-field leveling during installation
XX
Rated for 50,000 hours at 70% lumen maintenance (L70)
XX
Minimum 80 CRI; 2700K, 3500K, 4000K CCT
XX
Airtight option (ATH) complies with ASTM-E283 standards, meets
Washington State Energy Code
XX
Finned, extruded aluminum heat sink dissipates heat for cooler
operation
XX
This fixture is proudly made in the USA
XX
SPECIFICATIONS
XX
XX
11-7/16”
6”
6-3/8”
Adjusts from
0” min. to
1-3/8” max.
Pan Size: 12-3/16” x 16-1/4”
ORDERING INFORMATION
SERIES
OPTIONS
ICLSQ60TL
IC-Rated 6” Square Trimless LED Downlight
LED PACKAGE
NOMINAL
LUMENS
L11
1,100
L15
1,500
MINIMUM CRI & CCT
827 = 80 CRI, 2700K
830 = 80 CRI, 3000K
835 = 80 CRI, 3500K
840 = 80 CRI, 4000K
AVERAGE
SYSTEM
WATTAGE
14
18
MOUNTING
HB
NB
TB
Airtight housing
Wall wash insert
DRIVER
EXAMPLE: L15/835
LUMEN
PACKAGE
ATH
WW
Housing – 22-gauge galvanized steel housing
with 20-gauge pan and adjustable throat (0”
to 1-3/8”). Extruded aluminum heat sink.
Inner Housing Finish – Black TGIC polyester
powder coat bonded to phosphate-free, multistage pretreated metal.
Reflector – Low-iridescent lower trim with
clear satin finish and integral diffuser.
Electrical – High quality mid-power LED
module. L70 at 50,000 hours. 25°C maximum
ambient operating temperature.
Mounting – Recessed drywall.
Labels – c ETL us conforms to UL STD 1598;
Certified to CAN/CSA STD C22.2 No. 250.0.
Suitable for damp locations. Suitable for
direct insulation contact.
Qualifications – RoHS compliant.
Warranty – 5-year limited fixture warranty,
see www.hew.com/warranty.
(2) Hanger brackets with (2) bar hangers (rigid
bar mounting)
(2) Nailer bars (wood joist mounting)
(2) T-bar hangers (grid ceiling mounting)
DRV
DIM
Driver prewired for non-dimming applications
Driver prewired for 0-10V low-voltage dimming
applications
L3D ECO
Lutron Hi-Lume ® A-Series LED dimming driver
for EcoSystem ® controls
L3D 3WIRE Lutron Hi-Lume ® A-Series LED dimming driver
for 3-wire controls
LTE LINE
Lutron Hi-Lume ® A-Series LED dimming driver for
forward phase line voltage controls (120V only)
VOLTAGE
120
277
120V
277V
H.E. Williams, Inc. Carthage, Missouri w w w.hew.com 417-358-4065
Recessed LED
Page 1 of 2
ICLSQ60TL
LED
LED PHOTOMETRY
Catalog #: ICLSQ60TL-L15/835-CS-DRV
TEST REPORT
INFORMATION
CANDLEPOWER MULTIPLIER
Catalog
Number
Reflector
Finish
Conversion
Factor
SPC
Specular
1.02
CG
Champagne Gold
.96
GD
Gold
.93
PW
Pewter
.86
STR
Straw
.97
WT
Wheat
.88
Recessed LED
Page 2 of 2
IC-RATED 6” SQUARE TRIMLESS LED DOWNLIGHT
Date: 05/27/15
XX
Lamp Type: LED
XX
Rated Lumens: 819
XX
Watts: 16.7
XX
Lumens Per Watt: 49.0
XX
CRI: 82.0
XX
CCT: 3500K
90°
45º
80°
90º
XX
70°
60°
50°
40°
0°
10°
20°
30°
CANDLEPOWER DISTRIBUTION
Vertical
Angle
0º
Horizontal Angle
Zonal
0º
45º
90º Lumens
617.
617.
617.
5º
613.
613.
614.
58.0
LUMEN SUMMARY
Zone
Lumens
% Fixture
0º - 30º
845.
51.1
0º - 40º
1158.
70.5
15º
573.
576.
574.
161.0
25º
428.
475.
428.
204.0
0º - 60º
81.
91.5
35º
226.
274.
226.
157.0
0º - 90º
819.
100.0
45º
142.
120.
143.
103.0
55º
87.
61.
88.
67.0
65º
51.
32.
51.
41.0
75º
27.
17.
25.
22.0
85º
9.
6.
7.
8.0
90º
0.
0.
0.
H.E . W illiams, In c.
C ar t hage, Mis s our i
Information contained herein is subject to change without notice.
Total Luminaire:
0º - 180º
819.
100.0
IES Spacing Criteria: Adjacent = 1.0
Diagonal = 1.0
w w w.he w.c om
417- 3 5 8 - 4 0 6 5
HEW70514JJ REV.06/18/15
TYPE D2
ICLSQ60TL
IC-RATED 6” SQUARE TRIMLESS LED DOWNLIGHT
CATALOG #:
TYPE:
PROJECT:
EXAMPLE
LED
NOTES:
ICLSQ60TL
-
t
L15 / 835
t
SERIES
LUMEN
PACKAGE
-
-
NB
t
CRI & CCT
OPTIONS
t
-
DRV
t
MOUNTING
t
OPTIONS
DRIVER
-
120
t
VOLTAGE
FEATURES
Trimless 6” aperture provides crisp, clean installation
For hard pan ceiling applications in new construction
For use in direct contact with insulation
XX
LED module and driver accessible from below ceiling plane for ease
of maintenance
XX
Angular mud ring adjusts for in-field leveling during installation
XX
Rated for 50,000 hours at 70% lumen maintenance (L70)
XX
Minimum 80 CRI; 2700K, 3500K, 4000K CCT
XX
Airtight option (ATH) complies with ASTM-E283 standards, meets
Washington State Energy Code
XX
Finned, extruded aluminum heat sink dissipates heat for cooler
operation
XX
This fixture is proudly made in the USA
XX
SPECIFICATIONS
XX
XX
11-7/16”
6”
6-3/8”
Adjusts from
0” min. to
1-3/8” max.
Pan Size: 12-3/16” x 16-1/4”
ORDERING INFORMATION
SERIES
OPTIONS
ICLSQ60TL
IC-Rated 6” Square Trimless LED Downlight
LED PACKAGE
NOMINAL
LUMENS
L11
1,100
L15
1,500
MINIMUM CRI & CCT
827 = 80 CRI, 2700K
830 = 80 CRI, 3000K
835 = 80 CRI, 3500K
840 = 80 CRI, 4000K
AVERAGE
SYSTEM
WATTAGE
14
18
MOUNTING
HB
NB
TB
Airtight housing
Wall wash insert
DRIVER
EXAMPLE: L15/835
LUMEN
PACKAGE
ATH
WW
Housing – 22-gauge galvanized steel housing
with 20-gauge pan and adjustable throat (0”
to 1-3/8”). Extruded aluminum heat sink.
Inner Housing Finish – Black TGIC polyester
powder coat bonded to phosphate-free, multistage pretreated metal.
Reflector – Low-iridescent lower trim with
clear satin finish and integral diffuser.
Electrical – High quality mid-power LED
module. L70 at 50,000 hours. 25°C maximum
ambient operating temperature.
Mounting – Recessed drywall.
Labels – c ETL us conforms to UL STD 1598;
Certified to CAN/CSA STD C22.2 No. 250.0.
Suitable for damp locations. Suitable for
direct insulation contact.
Qualifications – RoHS compliant.
Warranty – 5-year limited fixture warranty,
see www.hew.com/warranty.
(2) Hanger brackets with (2) bar hangers (rigid
bar mounting)
(2) Nailer bars (wood joist mounting)
(2) T-bar hangers (grid ceiling mounting)
DRV
DIM
Driver prewired for non-dimming applications
Driver prewired for 0-10V low-voltage dimming
applications
L3D ECO
Lutron Hi-Lume ® A-Series LED dimming driver
for EcoSystem ® controls
L3D 3WIRE Lutron Hi-Lume ® A-Series LED dimming driver
for 3-wire controls
LTE LINE
Lutron Hi-Lume ® A-Series LED dimming driver for
forward phase line voltage controls (120V only)
VOLTAGE
120
277
120V
277V
H.E. Williams, Inc. Carthage, Missouri w w w.hew.com 417-358-4065
Recessed LED
Page 1 of 2
ICLSQ60TL
LED
LED PHOTOMETRY
Catalog #: ICLSQ60TL-L15/835-CS-DRV
TEST REPORT
INFORMATION
CANDLEPOWER MULTIPLIER
Catalog
Number
Reflector
Finish
Conversion
Factor
SPC
Specular
1.02
CG
Champagne Gold
.96
GD
Gold
.93
PW
Pewter
.86
STR
Straw
.97
WT
Wheat
.88
Recessed LED
Page 2 of 2
IC-RATED 6” SQUARE TRIMLESS LED DOWNLIGHT
Date: 05/27/15
XX
Lamp Type: LED
XX
Rated Lumens: 819
XX
Watts: 16.7
XX
Lumens Per Watt: 49.0
XX
CRI: 82.0
XX
CCT: 3500K
90°
45º
80°
90º
XX
70°
60°
50°
40°
0°
10°
20°
30°
CANDLEPOWER DISTRIBUTION
Vertical
Angle
0º
Horizontal Angle
Zonal
0º
45º
90º Lumens
617.
617.
617.
5º
613.
613.
614.
58.0
LUMEN SUMMARY
Zone
Lumens
% Fixture
0º - 30º
845.
51.1
0º - 40º
1158.
70.5
15º
573.
576.
574.
161.0
25º
428.
475.
428.
204.0
0º - 60º
81.
91.5
35º
226.
274.
226.
157.0
0º - 90º
819.
100.0
45º
142.
120.
143.
103.0
55º
87.
61.
88.
67.0
65º
51.
32.
51.
41.0
75º
27.
17.
25.
22.0
85º
9.
6.
7.
8.0
90º
0.
0.
0.
H.E . W illiams, In c.
C ar t hage, Mis s our i
Information contained herein is subject to change without notice.
Total Luminaire:
0º - 180º
819.
100.0
IES Spacing Criteria: Adjacent = 1.0
Diagonal = 1.0
w w w.he w.c om
417- 3 5 8 - 4 0 6 5
HEW70514JJ REV.06/18/15
Type
TYPE HX
Job Name
Snap LED S t r i p s
Catalog Number
M ade in USA
& Industrials
2 3/8"
60.3mm
2 3/8"
60.3mm
3"
1 3/4"
44.4mm
3 1/8"
79.3mm
76mm
2"
2"
50.8mm
50.8mm
S1
R1
ordering - Snap LED
series
S1
square
R1
round
lamp
rows
nominal
length
LED3
LO, SO, HO*
3000K
LED35
LO, SO, HO*
3500K
LED4
LO, SO, HO*
4000K
*LO-Low Output,
SO-Standard Output,
HO-High Output
01'**
02'
03'
04'
shielding color/finish
WA
white
acrylic
SAL
satin
acrylic
lens
voltage mounting
YGW* gloss
white
TMW
UNV*
* 120-277
textured
matte
white
CA48"
aircraft cable
(adjustable)
YPE
pewter
08'
Y__
premium
color
*row length
**LED only
CC
custom
color
06'
R_*
ND non-dimming standard
X3
hard ceiling
DM01 0-10v 1% dimming
X6
slot grid
*specify with
cable mount
only
DM10 0-10v 10% dimming
STEP step dimming
100-50-off
DML 1% Lutron dimming
DMD 1% DALI dimming
EMH* emergency battery
(remote only LED
1000 lumens)
EBCP1G electrical box
cover plate/mud ring,
single gang
EBCP2G electrical box
cover plate/mud ring,
dual gang
*EMH must remote mount
within 4' of fixture.
**3' or longer fixtures only
Construction Housing construction is die-formed 22-gauge
steel with spring-fastened aluminum endplates. Six and eight foot
fixtures come with 1 continuous lens - maximum lens length is 8'.
DM01 LED drivers are 0-10V dimmable and are compatible with most
0-10V wall slide dimmers and direct 0-10V analog signal dimmers.
Recommended wall dimmer is Leviton IP710 or equivalent. See data
sheet to confirm all specified dimmers meet require specifictions.
Fixtures are ETL Damp labeled and I.B.E.W. manufactured.
Maximum driver size is 1.625" width by 1.25" height.
Mounting Fixture is wall- or surface-mounted, or suspended
with cables.
Prudential reserves the right to change design specifications or materials without notice.
15
X1
exposed
T-bar
OCO** S-Occ™ Integrated
Occupancy System
Features Low-profile wrap strip light with extruded acrylic lens that
holds securely with no hardware or fasteners. Dimming, emergency,
and integrated occupancy sensor options are available – see
S-Occ™ information for restrictions and planning information. Can be
mounted in clothes closets.
08
controls/options
TRS tamper resistant
screws
*standard
**endplate will
be black
Electrical Must specify LED dimming controls. LED fixtures have constant current driver(s) with less than 20% THD when loaded to a minimum of 60%. Drivers sink a maximum of 6mA per driver. DM10 and
CA96"
aircraft cable
(adjustable)
*standard
GLV** galvanized
Finish The standard exterior body color is polyester powder paint
in gloss white. See ordering matrix for optional finishes. End plates are
painted black (YBB) with optional galvanized (GLV) finish unless
otherwise specified.
SUR*
surface or
wall mount
ceiling
system*
Prudential Lighting 1737 E. 22nd St. Los Angeles, CA 90058 6/14
Strips & Industrials
Snap LED
photometric data
S1-LED4SO-04-SAL-D1*
Report #LSI31584 D= 87.4% I=12.6%
Spacing Criteria: Along 1.2 ; Across 1.2
Delivered Lumens: 2910
Input Watts: 39.3
Lumens/Watt: 74.0
Calculated L70 ≥ 100,000 hours
Reported L70 (6k) ≥ 36,000 hours
5 year LED warranty - see prulite.com
460
150°
345
120°
230
115
90°
Candlepower Summary
Vertical
Angle
Ho r i z o n t a l A n g l e
Output
0° 22.5° 45° 67.5° 90° Lumens
845 845 845 845 845
838 832 845 847 844
81
794 792 810 814 814 226
712 717 737 748 747 337
600 613 640 659 664 397
474 496 536 567 579 410
346 377 431 476 494 381
223 262 329 385 407 319
111 158 233 292 316 237
24
76 151 208 229 154
0
50 121 173 192
0
44 109 155 172 108
0
37
92 129 142
87
0
28
71 108 118
66
0
21
54
83
98
47
0
16
41
61
79
31
0
11
30
43
60
18
0
7
19
24
37
8
0
4
10
13
8
2
0
1
3
3
1
0
0
0
0
0
0
0
5
15
25
35
45
55
65
75
85
90
95
105
115
125
135
145
155
165
175
180
Coefficients of Utilization (%)
115
230
60°
345
30°
460
Zonal Lumen Summary
Zone
0-90
90-180
Lumens
2543
367
%Luminaire
87.38
12.62
Floor
Ceiling
Wall
0
1
2
3
4
5
6
7
8
9
10
effective floor cavity reflectance =
80
70
50
70 50 30 10 70 50 30 10 50 30 10
116116116116112112112112104104104
105100 95 91 101 96 92 88 90 86 83
95 87 80 74 92 84 78 72 78 73 69
87 76 68 62 83 74 66 60 69 63 58
80 68 60 53 77 66 58 52 62 55 50
74 61 52 45 70 59 51 45 55 48 43
68 55 46 40 65 53 45 39 50 43 37
62 49 40 34 60 47 39 33 45 37 32
58 44 36 30 56 43 35 30 41 34 29
54 40 32 27 52 39 32 26 37 30 25
50 37 29 24 48 36 28 23 34 27 23
Prudential LEDs
CCT: 4000K
CRI: 87.7
R9: 39.3
PruBin™ is Prudential Lighting’s exclusive ‘job binning’ method that ensures color temperature
consistency across all luminaires on a project. Meticulously testing and labeling EVERY LED board
to +/- 25 lumens, +/- 50k CCT and +/- .004 Duv — while also separating positive from negative —
allows us to match color, hue and intensity throughout a project and provides a consistent color
temperature within a 2-step MacAdam ellipse.
LED Delivered Lumens and Watts
SNAP
LED LO
Lumens 375 l/ft
Watts
5 w/ft
LED SO
LED HO
727 l/ft
10 w/ft
875 l/ft
12 w/ft
Lumen output and wattages are nominal for all 3
color changes and may vary +/- 5%.
Prudential Lighting 213.746.0360 prulite.com
08
15
Snap LED S t r i p s
& Industrials
Square
Round
installation
Adjoining Detail
When surface or wall mounting, allow
space around fixture to access lamp
EBCP: Electrical box
cover plate/mud ring
single gang or 2 gang
Tamper resistant fastener
TRS
Insert captive retainer
with finger pressure.
Optional electrical
box cover (2" x 4"
or 4" x 4")
Mounting Locations
24", 36" or 48"
1/4"
1/4"
2 3/8" typ.
1/8"
endplate
3 1/4" typ.
1/8"
endplate
72 1/16" or 96 1/16"
1/4"
2 3/8"
2 3/8"
08
15
1/8"
3 1/4"
endplate
cable mount
surface mount
7/8"
1/4"
2 3/8"
3 1/4"
3 1/4"
CL
diameter K.O.
Prudential Lighting 1737 E. 22nd St. Los Angeles, CA 90058
2 3/8"
3 1/4"
1/8"
endplate
Created: 07/01/2014
WPLED13N
TYPE J1
LED 10W & 13 Wallpacks. Patent Pending thermal management
system. 100,000 hour L70 lifespan. 5 Year Warranty.
LED Info
Watts:
Color Temp:
Color Accuracy:
L70 Lifespan:
LM79 Lumens:
Efficacy:
Color: Bronze
Weight: 3.3 lbs
Driver Info
13W
4000K (Neutral)
86
100000
673
45 LPW
Type:
120V:
208V:
240V:
277V:
Input Watts:
Efficiency:
Constant Current
0.13A
0.08A
0.07A
0.06A
15W
87%
Technical Specifications
UL Listing:
Suitable for Wet Locations as a Downlight. Suitable for
Damp Locations as an Uplight. Wall Mount only.
Suitable for Mounting within 4ft. of ground.
Lumen Maintenance:
The LED will deliver 70% of its initial lumens at 100,000
hours of operation.
Cold Weather Starting:
The minimum starting temperature is -40°F/-40°C.
Color Stability:
LED color temperature is warrantied to shift no more
than 200K in CCT over a 5 year period.
Color Uniformity:
RAB's range of CCT (Correlated color temperature)
follows the guidelines of the American National
Standard for Specifications for the Chromaticity of Solid
State Lighting (SSL) Products, ANSI C78.377-2008.
Green Technology:
RAB LEDs are Mercury and UV free.
Ambient Temperature:
Suitable for use in 50°C (122°F) ambient temperatures.
Driver:
Multi-chip 13W high output long life LED Driver
Constant Current, Class 2 100V - 277V, 50/60 Hz.
Dark Sky Approved:
The International Dark Sky Association has approved
this product as a full cutoff, fully shielded luminaire.
For use on LEED Buildings:
IDA Dark Sky Approval means that this fixture can be
used to achieve LEED Credits for Light Pollution
Reduction.
Surge Protection:
4KV
Color Temperature (Nominal CCT):
4000K
Patents:
The design of the LPACK is protected by U.S. Pat.
D604,004 and patents pending in Canada, China and
Taiwan.
Fixture Efficacy:
44.6 Lumens per Watt
California Title 24:
See WPLED13/PC for a 2013 California Title 24
compliant model.
Color Accuracy:
86 CRI
Finish:
Our environmentally friendly polyester powder coatings
are formulated for high-durability and long-lasting color,
and contains no VOC or toxic heavy metals.
Color Consistency:
3-step MacAdam Ellipse binning to achieve consistent
fixture-to-fixture color.
Tech Help Line: 888 RAB-1000
Copyright ©2014 RAB Lighting Inc. All Rights Reserved
IESNA LM-79 & IESNA LM-80 Testing:
RAB LED luminaires have been tested by an
independent laboratory in accordance with IESNA
LM-79 and 80, and have received the Department of
Energy "Lighting Facts" label.
Gaskets:
High Temperature Silicone.
Email: sales@rabweb.com
On the web at: www.rabweb.com
Note: Specifications are subject to change without notice
Page 1 of 2
Created: 07/01/2014
WPLED13N - continued
Warranty:
RAB warrants that our LED products will be free from
defects in materials and workmanship for a period of
five (5) years from the date of delivery to the end user,
including coverage of light output, color stability, driver
performance and fixture finish.
Equivalency:
The WPLED13 is Equivalent in delivered lumens to a
100W Metal Halide Wallpack.
HID Replacement Range:
The WPLED13 can be used to replace 70-150W Metal
Halide Wallpacks based on delivered lumens.
Country of Origin:
Designed by RAB in New Jersey and assembled in the
USA by RAB's IBEW Local 3 workers.
Buy American Act Compliant:
This product is a COTS item manufactured in the United
States, and is compliant with the Buy American Act.
Recovery Act (ARRA) Compliant:
This product complies with the 52.225-21 "Required
Use of American Iron, Steel, and Manufactured Goods-Buy American Act-- Construction Materials (October
2010).
Trade Agreements Act Compliant:
This product is a COTS item manufactured in the United
States, and is compliant with the Trade Agreements Act.
GSA Schedule:
Suitable in accordance with FAR Subpart 25.4.
Tech Help Line: 888 RAB-1000
Copyright ©2014 RAB Lighting Inc. All Rights Reserved
Powered by TCPDF (www.tcpdf.org)
Email: sales@rabweb.com
On the web at: www.rabweb.com
Note: Specifications are subject to change without notice
Page 2 of 2
TYPE KX
E6.3.0
DANALITE
LINEAR LED SIGN/DISPLAY
Project:
Fixture Type:
Location:
Contact/Phone:
PRODUCT SPECIFICATIONS
Linear LED Sign/Display • Available in standard 2’, 3’,
and 4’ versions.
Lumens LED in standard and high output versions
to match fluorescent performance • LED High Output 600 delivered lumens per foot • LED Standard Output 410 delivered lumens per foot • Lumen maintenance L70
@ 25˚C - 80,000 hrs • Lumen measurements comply with
LM-79-08 standard • Operating tempratures: -25˚C to 50˚C.
DIMENSIONS
4-5/8”
2-3/4”
1/2”
Electrical 24V luminaire available with 120 to 277V
remote driver (ordered separately) • High output LED 12W per foot • Standard output LED 8W per foot
• 0-10 volt dimming option.
6-3/4”, 12-3/4”,
18-3/4”, 24-3/4”,
30-3/4”, 48-3/4”
Color Temperature 3000K, 4000K, 80+ CRI
• Color consistency within 2 SDCM.
Lens Options None, Clear, Frosted (Lenses feature
opaque co-extruded edges to eliminate glare).
Fixture Rotation 355˚.
1-1/8”
1-5/8”
Extrusion Housing/Stems Extruded aluminum housing
and stem.
24”, 36”, 48”
Finish Brushed Aluminum, White and Black.
Dimming Dimmable using 0-10V dimming protocols.
Labels U.L. listed for U.S. and Canada • Union made.
Product specifications subject to change without notice.
INSTALLATION
Mounting Options Stems are capable of mounting to j-box
or direct to wall/ceiling. From ceiling stem lengths: 6”, 12”,
18”, 24”, 30” and 48” (18” max stem length from wall.)
Canopy options – 2” round, 4” square, 4” round.
Fluorescent versions also available.
See the DanaLite DF Series.
REV-9/13
2-3/8”
End Cap
Middle Joiner
Middle Joiner
Two End Joints required for each run.
One Middle Joint required between each fixture.
End Cap
E6.3.0
DANALITE
LINEAR LED SIGN/DISPLAY
DIMENSIONS
SOLO FIXTURE
4-5/8”
2” Round Canopy Solo Fixture
4” Round Canopy Solo Fixture
2-3/4”
1/2”
7/16”
4-5/8”
4” Square Canopy Solo Fixture
1/2”
4-5/8”
MULTI FIXTURE
4” Round Canopy Multi Fixture
Wire Harness Jumper
Connector
2” Round Canopy LED Multi Fixture
4” Square Canopy Multi Fixture
Wire Harness Jumper
Connector
Multi Joiner Accessory
2 3/8"
Wire Harness
Jumper Connector
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925
220 Chrysler Drive • Brampton, Ontario • Canada L6S 6B6 • Phone (905) 792-7335 • Fax (905) 792-0064
Visit us at www.junolightinggroup.com Printed in U.S.A. ©2013 Juno Lighting, LLC.
E6.3.0
DANALITE
LINEAR LED SIGN/DISPLAY
ORDERING INFORMATION
Example: DL2S-S30-4R12-WH
Example: MJA-BA
See instruction sheet or brochure for more configuration and ordering examples.
Fixture
DL
DL LED
Fixture
Length
2
2 2 ft.
3 3 ft.
4 4 ft.
Solo or
Multiple
S
S Solo
M Multiple
Performance
Color
Temperature
S
30
S Standard Output 30 3000K
40 4000K
H High Output
-
Canopy/
Power Supply
Mounting
Stem Length*
4R
12
2R 2” Round/Remote
4R 4” Round/Remote
4S 4”Square/Remote
Finish
-
WH White Paint
BL Black Paint
BA
Brushed
Aluminum
06 6”
1212”
1818”
2424”
3030”
4848”
Lens Type
MJA
C
F
Clear
Frosted
Blank for
No Lens
Finish
Accessories
WH
MJAMulti Joiner
(For Multi-Power
Supply LED
Applications
BA
-
WH White Paint
BL Black Paint
BA
Brushed
Aluminum
*18” max. length for wall installations
WATTAGE INFORMATION
POWER SUPPLY OPTIONS (REMOTE MOUNT)
LED FIXTURE WATTAGE
Length High Output Standard Output
2'24W 16W
3'36W 24W
4'48W 32W
6'72W 48W
8'96W 64W
LED Drivers
Non-Dimmable
DLD-80-120
Non-Dimmable 80W Remote 24VDC (120V input)
DLD-100
Non-Dimmable 100W Remote 24VDC (120-277V input)
Dimmable
DLD-60-DIM
Dimmable 60W 24VDC (120-277V input)
DLD-100-DIM
Dimmable 100W 24VDC (120-277V input)
Finish: Natural Aluminum
LED Approved Dimmers
Lutron Model No. Leviton Model No.
NTF-10
IP710-DLX
NTF-10-277
Consult Technical Services or the factory for additional dimmers.
Factory Installed Cord & Plug Option
(LED Only)
(Add suffix to driver – Non dimming only)
SuffixDescription
-CP6WH
6 Ft cord w/3-prong plug, white, 120V
-CP6BL
6 Ft cord w/3-prong plug, black, 120V
Example: DLD-80-120-CP6WH
3 7/32"
15 1/4"
2 1/16"
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925
220 Chrysler Drive • Brampton, Ontario • Canada L6S 6B6 • Phone (905) 792-7335 • Fax (905) 792-0064
Visit us at www.junolightinggroup.com Printed in U.S.A. ©2013 Juno Lighting, LLC.
E6.3.0
DANALITE
LINEAR LED SIGN/DISPLAY
PHOTOMETRIC REPORT
Test Report #: PT02132204
Catalog No: D L4S-H30
3000K with Clear Lens
Luminaire LPW: 53.77
220
440
660
880
1100
PHOTOMETRIC REPORT
Test Report #: PT02132205
Catalog No: D L4S-H30
3000K with Frosted Lens
Luminaire LPW: 53.90
181
320
459
598
737
PHOTOMETRIC REPORT
Test Report #: PT02132206
Catalog No: D L4S-H30
3000K with No Lens
Luminaire LPW: 53.84
220
440
660
880
1100
CANDLEPOWER
DISTRIBUTION
(Candelas)
Degrees Vertical0˚
0793
5788
15766
25719
35649
45552
55433
65285
75119
8515
900
Multiplier for Standard Output: 0.66
CANDLEPOWER
DISTRIBUTION
(Candelas)
Degrees Vertical0˚
0598
5595
15572
25532
35467
45382
55288
65195
75116
8560
9042
Multiplier for Standard Output: 0.66
CANDLEPOWER
DISTRIBUTION
(Candelas)
Degrees Vertical0˚
0802
5799
15774
25722
35645
45550
55438
65308
75174
8549
900
Multiplier for Standard Output: 0.66
AVERAGE INITIAL FOOTCANDLES
Multiple Units (Square Array, 60’x60’ room)
Ceiling 80% Wall 50% Floor 20%
Spacing RCR1 RCR3 RCR5
4.0´ 130 101
81
5.0´
83
65
52
6.0´
58
45
36
7.0´
47
37
29
8.0´
37
29
23
9.0´
28
22
18
10.0´
21
16
13
ZONAL LUMEN SUMMARY
Zone Lumens %Lamp%Fixture
0 - 30°
600
N/A
30.7
0 - 40°
990
N/A
50.7
0 - 60°
1697
N/A
86.8
0 - 90°
1952
N/A
99.8
AVERAGE INITIAL FOOTCANDLES
Multiple Units (Square Array, 60’x60’ room)
Ceiling 80% Wall 50% Floor 20%
Spacing RCR1 RCR3 RCR5
4.0´ 111
85
68
5.0´
71
54
43
6.0´
49
38
30
7.0´
40
31
24
8.0´
32
24
19
9.0´
24
18
15
10.0´
18
14
11
ZONAL LUMEN SUMMARY
Zone Lumens %Lamp%Fixture
0 - 30°
463
N/A
26.6
0 - 40°
754
N/A
43.4
0 - 60°
1307
N/A
75.0
0 - 90°
1691
N/A
97.1
AVERAGE INITIAL FOOTCANDLES
Multiple Units (Square Array, 60’x60’ room)
Ceiling 80% Wall 50% Floor 20%
Spacing RCR1 RCR3 RCR5
4.0´ 154 117
92
5.0´
98
75
59
6.0´
68
52
41
7.0´
55
42
33
8.0´
44
33
26
9.0´
33
25
20
10.0´
25
19
15
ZONAL LUMEN SUMMARY
Zone
0 - 30°
0 - 40°
0 - 60°
0 - 90°
Lumens %Lamp%Fixture
627
N/A
26.5
1029
N/A
43.5
1842
N/A
77.9
2365
N/A
100.0
INITIAL FOOTCANDLES
(One Unit, 53.8W , 114.7° Beam)
Distance to Illuminated Plane Footcandles
Beam
(Feet)
Beam Center Diameter
6
22.018.7’
8
12.425.0’
10
7.931.2’
12
5.537.5’
LUMINANCE (Average cd/m2)
Degrees
45
55
65
75
85
Average
Luminance
30051
29044
25933
17646
6738
INITIAL FOOTCANDLES
(One Unit, 53.9W , 103.6° Beam)
Distance to Illuminated Plane Footcandles
Beam
(Feet)
Beam Center Diameter
6
16.615.2’
8
9.320.3’
10
6.025.4’
12
4.230.5’
LUMINANCE (Average cd/m2)
Degrees
45
55
65
75
85
Average
Luminance
20489
18728
16496
13173
6627
INITIAL FOOTCANDLES
(One Unit, 53.8W , 115.6° Beam)
Distance to Illuminated Plane Footcandles
Beam
(Feet)
Beam Center Diameter
6
22.319.1’
8
12.525.4’
10
8.031.8’
12
5.638.1’
LUMINANCE (Average cd/m2)
Degrees
45
55
65
75
85
Average
Luminance
29934
29383
28106
25874
21562
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925
220 Chrysler Drive • Brampton, Ontario • Canada L6S 6B6 • Phone (905) 792-7335 • Fax (905) 792-0064
Visit us at www.junolightinggroup.com Printed in U.S.A. ©2013 Juno Lighting, LLC.
codes and standards
electronics
• UL listed to Standard 924
• NFPA 101 (Life Safety Code)
• NFPA 70 (National Electric Code) and OSHA
Standards California Energy Commission
• UL listed for damp location
construction and finish
• Available in matte black housing with brushed
aluminum face or white with a powder coat paint
finish.
• All signs provided with shallow canopy for ceiling
or end installations.
• Extra stencil faceplate is provided for converting
single face signs to double face signs in the field
with ease. All units have concealed directional
chevron indicators (knockouts).
installation
• Universal mounting (wall, side, or ceiling).
• Canopy and mounting hardware provided.
• Universal knockouts on backplate allow for wall
mounting directly to J-Box.
TYPE X
CE-11300
• AC Only:
Red = 2.48 Watts, Green = 2.22 Watts
Emergency:
Red = 3.08 Watts, Green = 3.08 Watts
• Surge protection is standard on all models.
• Charging System is complete with low voltage
disconnect, AC lockout, and brownout protection.
• 120/277 VAC Selectable Input.
Commercial Exit Signs
55 Line
Die Cast Aluminum LED
Contemporary
battery
• Maintenance free sealed nickel cadmium has
estimated service life of 8 to 10 years.
• Operating temperature range of 20˚F (-7˚C) to
95˚F (35˚C).
• Provides 90 minutes of emergency illumination.
warranty
• Five full years on electronics and unit.
Specifier’s Reference
Project
Type
Model No.
Comments
Green Product Choice: ER55L3R
Accessories
Family
Housing Finish
55L – LED (AC only)
ER55L – Emergency LED
ER55LD – Emergency LED
(Self-diagnostic/
self-test circuitry)
Blank – Matte Black with
brushed Alum. Face
W – White
PVS2 – Polycarbonate Vandal Shield
WG4 – Wire Guard
Note:
For (8" Letters) New York City die cast aluminum
exit signs, refer to specification sheet number
CN-26300.
No. of Faces
3 – Single Face with extra
stencil face plate for
double face applications
CE-11300 10/14 Letter Color
R – Red
G – Green
CE-11300
55 Line Die Cast Aluminum LED Contemporary
dimensions
5-1/2''
(140mm)
8-1/2''
(216mm)
1-3/4''
(45mm)
9-1/8''
(232mm)
13-7/16''
(341mm)
© 2014 Koninklijke Philips N.V. All rights reserved.
Specifications are subject to change without notice.
www.philips.com/luminaires
CE-11300 10/14 page 2 of 2
12-13/16"
(325mm)
Philips Lighting
North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873
Tel. 855-486-2216
Imported by: Philips Lighting
A division of Philips Electronics Ltd.
281 Hillmount Rd,
Markham, ON Canada L6C 2S3
Tel. 800-668-9008