Industrial Grade Switches
Product Line Bulletin
Motor Starter Switches
and NEMA Enclosures
Safety Disconnect
Switches
Motor Starter Switch Features
10 YEAR LIMITED
UL 508 Listed
CUL per CSA Specification C22.2 No. 14 Certified
Topped roll-over brass
bushings secure yoke to
device
Robust, full-face, nickel-plated,
brass mounting yoke offers
exceptional strength and
corrosion-resistance
Large toggle is easy to turn
ON/OFF with gloved hand
30A & 40A Motor Starter Switch Features
Oversized Valox® toggle is
capable of withstanding extreme
impact, harsh chemical attack,
and prolonged ultraviolet
exposure
Mounting yoke is
permanently marked
with catalog number,
amperage, voltage
and horsepower
ratings for easy
identification
#10 triple-combination
nickel-plated terminal
screws resist loosening
from vibration and
facilitates tightening to
proper torque ranges
Internal chamber barriers
prevents flash-over between
contact sets
Impact-resistant Rynite®
face and base
Strip gauge and terminal
identification permanently
marked on base of device
Positive toggle ON/OFF actuation
is accomplished by the toggle
riding on a single-piece,
non-conductive, non-tracking,
thermoplastic pivotal link designed
to minimize friction, resists wear,
and high-use deterioration.
COMPONENT
Side and back wired
terminal screws accept
up to a #10 AWG solid
copper wire
Multiple termination
design accepts back and
side wiring, terminal
clamps, or ring terminals
High-performance silver-cadmium
oxide contacts minimize wear
and erosion.
.062” Nickel-Plated Brass
Base
Rynite®
Toggle
Valox®
Face
Rynite®
Contacts
.031” Thick Silver Cadmium Oxide
Triple Drive #10 Terminal
Screws
#10-32 Nickel-Plated Brass Slotted;
Undercut Binding Head Design
Assembly
Topped Roll-Over Brass Bushings
NEMA
ANSI
STANDARDS & CERTIFICATIONS
UL
UL Fed Spec
CUL per CSA
⻬
Listed WS896E
C22.2 No.14
NOM
⻬
508
#E63969
Not Applicable
#E63969
#057
C-73
High-conductive nickel-plated
brass terminal screws improve
current flow and prolong
component life.
Insulating barriers provide
terminal isolation between
phases
NEMA 1 and NEMA 3R enclosures
with or without switches are
available.
DESCRIPTION
Mounting Yoke
WD1& WD6
1
Thick walled Rynite®
housing and interlocking
face encapsulates and
protects internal
mechanism in extreme
and harsh industrial
environments
CAT. NO.
RATING
MS302
30AMP
600V AC
2 HP 120V
5 HP 240V
10HP 480V
15 HP 600V
30AMP
600V AC
3 HP 120V
71/2 HP 240V
15HP 480V
20 HP 600V
40AMP
600V AC
2 HP 120V
5 HP 240V
10HP 480V
15 HP 600V
40AMP
600V AC
3 HP 120V
71/2 HP 240V
15HP 480V
20 HP 600V
MS303
MS402
MS403
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
AC HORSEPOWER RATING
www.leviton.com
Motor Starter Switch Features
10 YEAR LIMITED
UL 508 Listed
CUL per CSA Specification C22.2 No. 14 Certified
Large toggle is easy to turn
ON/OFF with gloved hand
Topped roll-over zinc-plated
brass bushings secure yoke
to device
Thick walled Rynite® housing
and interlocking face encapsulates and protects internal
mechanism in extreme and
harsh industrial environments
Insulating barriers provide
terminal isolation between
phases
60A Motor Starter Switch Features
Impact-resistant Rynite®
face and base
Front or back wired
terminal screws accept
up to a #4 stranded
AWG or #10 solid AWG
copper wire
Internal chamber barriers
prevents flash-over between
contact sets
Positive toggle ON/OFF actuation
is accomplished by the toggle
riding on a single-piece,
non-conductive, non-tracking,
thermoplastic pivotal link designed
to minimize friction, resists wear,
and high-use deterioration.
Zinc-plated lug-type terminal
screws, hold conductors securely
in place assuring an excellent
electrical connection and delivery
of maximum current to the
designated large (.218”) diameter
contact.
COMPONENT
DESCRIPTION
Mounting Yoke
.062” Nickel-Plated Brass
Base
Rynite®
Toggle
Valox®
Face
Rynite®
Figure 1 – Cat. Nos. MS602-BW/FW
Line
600VAC
.046” Thick Silver Cadmium Oxide
Terminal
5/16-24
Assembly
Topped Roll-Over Zinc-Plated Brass Bushings
CAT. NO.
T2
OFF
Motor
T1
NEMA 3R enclosure is carbon steel
with polyester powder coating over
phosphatized surface for a highly
durable finish
Figure 2 – Cat. Nos. MS603-BW/FW
Line
L3
Line
L2
T2
Line
L1
T1
Line
600VAC
T3
OFF
Motor
RATING
AC HORSEPOWER RATING
MS602
60AMP
600V AC
2-Pole 1ø
10 HP 240V
15HP 480V
20 HP 600V
MS603
60AMP
600V AC
3-Pole 3ø
10 HP 240V
25HP 480V
30 HP 600V
Zinc-Plated Steel, Triple-Combination
NEMA
ANSI
STANDARDS & CERTIFICATIONS
UL
UL Fed Spec
CUL per CSA
⻬
Listed WS896E
C22.2 No.14
NOM
⻬
508
#E63969
Not Applicable
#E63969
#057
C-73
L2
L1
Contacts
WD1& WD6
Cam break action opens & closes,
high-performance, double contacts
used to absorb high energy in the
make-break-cycle, run cooler and
more efficiently prolonging and
extending switching performance.
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
2
30 & 40A 600V AC
Industrial Grade, Back & Side Wired-MSS Devices,
SideWired,BusBarTermination& RingTerminal-WS Devices
ENVIRONMENTAL
FLAMMABILITY
OPERATING TEMP.
Rated V0 per UL94
-40C to 65C
ELECTRICAL
DIELECTRIC
VOLTAGE
OVERLOAD
UL 508 TEST
Withstands
2200V
for 1min
TEMP.
RISE
50 cycles of overload
at 6 times rated
current
ENDURANCE
50 C max
UL 508 6,000 cycles inductive
at full rated
motor type load. Dual rated
current
General and Manual Motor Control
MECHANICAL
Industrial Grade Motor Starter Switches
TERMINAL I.D.
T1, T2, T3, L1, L2 & L3
marked on back of device
MS302-S
TERMINAL ACCOMM.
PRODUCT I.D.
Ratings are permanently
stamped on device strap
#10 -#8 AWG
MS303
MS403
TOGGLE
COLOR
CERTIFICATION
CUL
UL Fed
Spec per CSA NOM
WS896E C22.2 No.111
NEMA
WD-1 ANSI
& WD-6 C-73
UL
508
#E63969
TORQUE
20 inch pounds
N1303
DOUBLE-POLE
SINGLE-THROW
10 YEAR LIMITED
Not
Applicable
#E63969 #057
WS402
N3303
AC HP
RATING
THREE-POLE
SINGLE-THROW
AC HP
RATING
30A 600V AC, Motor Starting Switch
Switch
Only
Switch
Only
Switch in NEMA 1 Switch in NEMA 3R
2HP 120V
Enclosure
Enclosure
Black
MS302
Black (short toggle) MS302-S
N1302
–
5HP 240V
10HP 480V
15HP 600V
N3302
–
Switch in NEMA 1 Switch in NEMA 3R
3HP 120V
Enclosure
Enclosure
MS303
MS303-S
N1303
–
N3303
–
71/2HP 240V
15HP 480V
20HP 600V
40A 600V AC, Motor Starting Switch
Black
2HP 120V
5HP 240V
10HP 480V
15HP 600V
MS402
40A 600V AC, Welder Starting Switch
3HP 120V
71/2HP 240V
15HP 480V
20HP 600V
MS403
(Terminal Screws Packaged Separately)
Recognized Component for OEM use.
Black
WS402
NEMA 1 STEEL ENCLOSURE
WITHOUT SWITCH
30 Amp MS Switch
5HP 240V
NEMA 3R ENCLOSURE
WITHOUT SWITCH
30 or 40 Amp MS Switch
–
–
302 STAINLESS STEEL LOCKOUT
WALLPLATE w/ TAMPER-RESISTANT
SCREWS & SPANNER TOOL
302
STAINLESS STEEL
2 Knockouts
#1: 1/2”-11/4” Bottom
#2: 1/2”- 3/4” Bottom
2 Knockouts
1/2” & 3/4”
Top & Bottom
EnclosureDimensions
See page 4
84001-LOK
1.50
(38.1 mm)
.96
(24.4 mm)
.96
(24.4 mm)
.900 (22.9 mm)
2.47 (62.7 mm)
2.0 (50.8 mm)
2.47 (62.7 mm)
2.0 (50.8 mm)
1.20
(30.5 mm)
2.45 (62.2 mm)
1.00 (25.4 mm)
2.97 (75.4 mm)
3.11 (78.7 mm)
1.14
(28.96 mm)
1.38 (35.0 mm)
84009-40
K.O. TOP & BOTTOM
2.19 (55.6 mm)
3.8 (96.5 mm)
3.8 (96.5 mm)
1.87 (47.5 mm)
1.50
(38.1 mm)
84001-40
Lock Purchased Seperately
2.40 (61.0 mm)
N33NC
5.60 (142.2 mm)
N13NC
1.20
(30.5 mm)
TOP
BACK
MS302-S Toggle Length,
.64 (16.3 mm)
MS302 & MS303
3
MS402 & MS403
WS402
To learn more about Leviton devices or for answers to technical questions call our Techline at
N13NC
1-800-824-3005 or visit us at:
For N3303 dimensions
see page A12.
www.leviton.com
60A 600V AC
10 YEAR LIMITED
Industrial Grade, Front & Back Wired-MSS Devices
ENVIRONMENTAL
FLAMMABILITY
OPERATING TEMP.
Rated V0 per UL94
-40C to 65C
ELECTRICAL
DIELECTRIC
VOLTAGE
OVERLOAD
UL 508 TEST
Withstands
2200V
for 1min
TEMP.
RISE
50 cycles of overload
at 6 times rated
current
ENDURANCE
50 C max
UL 508 6,000 cycles inductive
at full rated
motor type load. Dual rated
current
General and Manual Motor Control
CERTIFICATION
MECHANICAL
TERMINAL I.D.
T1, T2, T3, L1, L2 & L3
marked on back of device
TERMINAL ACCOMM.
#10 -#4 AWG
PRODUCT I.D.
Ratings are permanently
stamped on device strap
TOGGLE
COLOR
UL
508
#E63969
25 inch pounds
#E63969 #057
N3603 - Without Front Cover
N3603
DOUBLE-POLE
SINGLE-THROW
Not
Applicable
AC HORSEPOWER
RATING
THREE-POLE
SINGLE-THROW
AC HORSEPOWER
RATING
60A 600V AC, Motor Starting Switch
Back-Wired
Switch
Only
Black
Front-Wired
Switch
Only
MS602-BW
Front-Wired
Switch in
NEMA 3R
Enclosure
MS602-FW
10HP 240V
15HP 480V
20HP 600V
N3602
Back-Wired
Switch
Only
Front-Wired
Switch
Only
Front-Wired
Switch in
NEMA 3R
Enclosure
MS603-BW
MS603-FW
N3603
10HP 240V
25HP 480V
30HP 600V
1.71 (43.3mm)
1.37 (34.9mm)
NEMA 3R ENCLOSURE WITHOUT SWITCH
40 or 60 Amp MS Switch
3.43 (87.2 mm)
1.70 (43.3 mm)
0.96 (24.3mm)
LEVITON
CAT.NO. MS603
PEND.
THREE
PHASE
MANU
MOTO
CONTR
THREE
PHASE
10HP-240VAC
25HP-480VAC. 30HP-600VAC
60A-600V.A.C GENERAL PURPOSE
3.75 (95.2 mm)
3.28 (83.3 mm)
2.38 (60.3 mm)
3.75 (95.2mm)
3.28 (83.3mm)
60A-600V.A.C GENERAL PURPOSE
10HP-240VAC
25HP-480VAC. 30HP-600VAC
MANU
MOTO
CONTR
2.38 (60.3mm)
PAT.
2 Knockouts
#1: 1/2”-11/4” Bottom
#2: 1/2”- 3/4” Bottom
C US
1.37 (34.9 mm)
3.43 (87.2mm)
MS602-BW & MS603-BW
.05 (1.3 mm)
MS602-FW & MS603-FW
N36NC
6.3 (160.0 mm)
4.33 (109.9 mm)
4.30 (109.2 mm)
4.3 (109.2 mm)
X.01
X.01
8.1 (205.7 mm)
0.05REF
NO PAINT/FINISH
ON THREAD(4)
5.5 (139.7 mm)
6.15 (156.2 mm)
3.86 (98.0 mm)
4.13 (105 mm)
4.13 (105 mm)
#10-32 TAP
1.23 (31.3 mm)
.13 (3.2 mm)
Industrial Grade Motor Starter Switches
MS602-FW
TORQUE
CUL
UL Fed
Spec per CSA NOM
C22.2
No.111
WS896E
NEMA
WD-1 ANSI
& WD-6 C-73
6.15 (156.2 mm)
SIDE
FRONT
N3303 - See page 3 for Product Information
To learn more about Leviton devices or for answers to technical questions call our Techline at
INTERIOR
SIDE
N3603
1-800-824-3005 or visit us at:
www.leviton.com
4
Disconnect Switch Features
2 YEAR LIMITED
30 Amp, Non-Fused Safety Disconnect Switch
Captive Stainless Steel
Cover Screws Won’t Fall
Out When Cover is Open
Engineered
to IP65 Standards
High Impact,
Non-Conductive Valox®
Cover, Housing and
Handle
2-Top Knock-outs
for Wiring Flexibility
Safety Disconnect Switch Features
Factory-Installed
Cover Gasket
Enclosure Rated to UL
and IEC Watertight
Standards
Type 3R, 4X, and 12K
IP65
(4) Mounting Feet Included
(5 Position Settings)
DS30-AX
UL94 V-0
Self-Extinguishing, Flame
Retardant Rating
Liquid-tight Conduit
Fitting Can Be Installed
for Top or Bottom Feed
1 Fitting Supplied
30 Amp - 1”
Metal Ground Frame
1 Factory Installed Auxiliary Contact
(Normally Open - 10 Amp)
Additional Auxiliary Contacts Available
(Normally Closed - 10 Amp)
IEC Non-Fused
Switch Mechanism
Drill Mark
for Side
Conduit
Entry
Neutral
Buss
Lockout Mechanism
Integrated with Handle
Ground
Buss
High-Visibilty Handle can be Locked
and Tagged in the OFF Position
(even when cover is off)
Drill Mark for Back
Conduit Entry
STANDARDS & CERTIFICATIONS
Saftey Disconnect Switches
UL 98 Fused
(Including 100A Non-Fused -DS)
E63969
5
UL 508
Non-Fused
CSA C22.2
No. 14
NOM
CE
IEC
947-3
⻬
⻬
⻬
⻬
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
Disconnect Switch Features
Watertight Safety Disconnect Switches
2 YEAR LIMITED
30 Amp Fused, 60 & 100 Amp (Fused & Non-Fused)
Liquid-tight conduit fitting can be
installed for top or bottom feed
Red “pistol grip” handle
provides visual confirmation
of switch’s status
One fitting supplied:
• 30 Amp - 1”
• 60 Amp - 1-1/2”
• 100 Amp - 2”
Integrated lockout handle meets
OSHA safety regulations
Stainless steel screws are
captive and will not fall out
when cover is opened
Handle with padlock installed
Circuit identification pad for
means of identifying specific
equipment loads
Fused Models Accept
“Class J” Time-Delay
Fuses
DS60-FAX
Generous wiring space for top to
bottom wiring
Pre-wired grounding plates
(top and bottom of enclosure)
connect to metal conduit
grounding system
Brass threaded inserts will not
strip, provide higher torque, and
form tighter seal between back box
and cover
Disconnect switch with integrated fuse
holder offers proven performance in a compact package
• Fused cartridges accept “Class J” fuses
(not included)
• 1 Factory installed Auxiliary Contact
(Normally Open - 10 Amp)
• Additional Auxiliary Contact Available
(Normally Closed - 10 Amp)
• Easily accessible neutral and ground
terminal blocks
Rugged hinge mechanism pivots
180º for easy access during
installation and maintenance
Safety Disconnect Switch Features
Impact UV and chemical-resistant
Valox enclosure rated to UL and
IEC watertight standards
• Type 3R, 4X & 12K
• IP67
DS60-FAX
STANDARDS & CERTIFICATIONS
Saftey Disconnect Switches
UL 98 Fused
(Including 100A Non-Fused -DS)
E63969
UL 508
Non-Fused
CSA C22.2
No. 14
NOM
CE
IEC
947-3
⻬
⻬
⻬
⻬
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
6
Specifications
2 YEAR LIMITED
Watertight Safety Disconnect Switches
Safety Disconnect Switches
Engineered to UL & IEC
Watertight Standards
DS30-AX
Engineered to IP65
Water Jetting Standards
Ordering Information
AMPS
MAX
VOLTAGE
30
60
100
600V AC
600V AC
600V AC
CATALOG NO.
ELECTRICAL
Device Current
Applied
Ground
Path
Integrity
30 A
60 A
100 A
Current
Interrupting
FUSED
DS30-AX
DS60-AX
DS100-AX
DS30-FAX
DS60-FAX
–
120V AC
208V AC
240V AC
480V AC
600V AC
3Ø Y120/208V AC
3Ø 240V AC
3Ø 480V AC
3Ø 600V AC
1
5
2.5
5
NA
5
5
15
15
2
20
10
20
20
20
20
40
40
ENVIRONMENTAL
Mold Stress Relief
70°C for 7 hours
Knockout Test
Remains in place
with 20 lb
push
Flammability
Crush
100 lb
Impact
1.2 lb steel ball
dropped
from 5 ft
Rain (3R)
per UL 50
Cold Impact
Same as
above, after
conditioning
to -35°C
Strength of
Insulating
Base and Support
110% of
specified
tightening
torque on
terminal screws
Pullout
18 lb pull on
internal wires
MAX. HP RATINGS PER UL508
NON-FUSED SAFETY DISCONNECT SWITCHES
DS30-AX
DS60-AX
DS100-AX
VOLTS
NR = Not Rated
60 A
2 min
120 A
4 min
200 A
6 min
Certified for
current
interrupting at
full-rated
current and
voltage
1000 V plus
twice rated
voltage for
1 minute
Dielectric
NON-FUSED
MECHANICAL
Duration
6000 operations
at rated
current and
voltage
(Power factor
0.75 – 0.80)
Endurance
7
DS100-AX
(Non-Fused)
DS60-FAX
(Fused)
5
25
15
25
20
25
30
50
50
VOLTS
120V AC
208V AC
240V AC
480V AC
600V AC
3Ø Y 120/208V AC
3Ø 240V AC
3Ø 480V AC
3Ø 600V AC
Hosedown (4X)
per UL 50
Dust (12K)
per UL 50
Gasket Aging
UV Resistance
Operating
Temperature
MAX. HP RATINGS PER UL508
FUSED SAFETY DISCONNECT SWITCHES
DS30-FAX
DS60-FAX
2
7.5
3
15
20
7.5
7.5
15
20
NA = Not Available
To learn more about Leviton devices or for answers to technical questions call our Techline at
V2 or better per
UL 94 or CSA
22.2 No 0.6;
V-0 for watertight
enclosure
Water spray @
5 psi from
all sides for 1 hr
Water spray @
65 gal/min for
5 minutes
Cement Dust
Circulated @
1000 ft/minute for
5 minutes
70°C for
168 hours
Exposed plastic
materials
are UV stabilized
-40°C to +60°C
(-40°F to +140°F)
1-800-824-3005 or visit us at:
NR
15
NR
NR
NR
15
15
30
50
www.leviton.com
Specifications
Watertight Safety Disconnect Switches
2 YEAR LIMITED
Engineered to UL & IEC
Watertight Standards
Enclosures are Type 3R, 4X & 12K, IP67*
to UL 508 for Non-Fused and UL 98 for Fused*
■ Certified to CSA Standard C22.2 number 14
■ Classified to IEC Standard 947-3
■ CE marking per low-voltage directives 73/23/EEC, 93/68/EEC
■
■ Listed
Material Specifications
30 & 60 Amp Switch, Fused
30 Amp Switch, Non-Fused
Housing Cover
Housing Base
Housing Gasket
Sealing Gasket
Handle
Screw handle
Conduit Grounding Plate
Conduit Hub
Switch
Switch Terminal Contacts
Internal Screws
Housing Screws
Mounting Feet
Ground Terminal
Ground Terminal Block
Neutral Terminal
Neutral Terminal Block
Valox 357
Valox 357
Solid Chloroprene
Solid Chloroprene
Valox 357
Stainless Steel
Zinc-Coated Steel
Die-Cast Zinc
Nylon
Brass
Zinc-Coated Steel
Stainless Steel
Valox 357
Plated Brass/Steel
Nylon
Plated Brass/Steel
Nylon
60 & 100 Amp Switch, Non-Fused
PART
Housing Cover
Housing Base
Housing Gasket
Sealing Gasket
Handle
Screw handle
Conduit Grounding Plate
Conduit Hub
Switch
Switch Terminal Contacts
Internal Screws
Housing Screws
Hinge Screws
Mounting Feet
Ground Terminal
Ground Terminal Block
Neutral Terminal
Neutral Terminal Block
PART
MATERIAL
Housing Cover
Housing Base
Housing Gasket
Sealing Gasket
Handle
Screw handle
Conduit Grounding Plate
Conduit Hub
Switch
Switch Terminal Contacts
Internal Screws
Housing Screws
Hinge Screws
Fuse Holder
Mounting Feet
Ground Terminal
Ground Terminal Block
Neutral Terminal
Neutral Terminal Block
MATERIAL
Valox 357
Valox 357
Solid Chloroprene
Solid Chloroprene
Valox 357
Stainless Steel
Zinc-Coated Steel
Die-Cast Zinc
Reinforced Nylon
Brass
Zinc-Coated Steel
Stainless Steel
Stainless Steel
Valox 357
Plated Brass/Steel
Nylon
Plated Brass/Steel
Nylon
MATERIAL
Safety Disconnect Switches
PART
Valox 357
Valox 357
Solid Chloroprene
Solid Chloroprene
Valox 357
Stainless Steel
Zinc-Coated Steel
Die-Cast Zinc
Reinforced Nylon
Brass
Zinc-Coated Steel
Stainless Steel
Stainless Steel
Reinforced Nylon
Valox 357
Plated Brass/Steel
Nylon
Plated Brass/Steel
Nylon
STANDARDS & CERTIFICATIONS
Safety Disconnect Switches
UL 98
UL 508
CSA
Fused Non-Fused C22.2 No.14
⻬
⻬
⻬
NOM
CE
IEC
947-3
⻬
⻬
⻬
Valox® is a registered trademark of GE.
* IP Ratings & UL Standards
CATALOG NO.
IP RATING
UL STANDARD
DS30-AX
DS60-AX
DS100-AX
DS30-FAX
DS60-FAX
IP65
IP67
IP67
IP67
IP67
UL508
UL508
UL98
UL98
UL98
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
8
Dimensions
Watertight Safety Disconnect Switches
7.95
(202 mm)
8.78
(223 mm)
7.12
(180.9 mm)
7.83
(199 mm)
6.3
(160 mm)
5.12
(130 mm)
7.48
(190.1 mm)
3.11
(79.1 mm)
30 AMP FUSED & 60 AMP NON-FUSED
ON
7.28
(184.9 mm)
OFF
0.44
(11.1 mm)
5.24
(133.1 mm)
3.26
(82.8 mm)
6.24
(158.5 mm)
7.28
(90.9 mm)
30 AMP NON-FUSED
9
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
11.69 (297 mm)
OFF
10.86 (275.9 mm)
12.52
(318 mm)
10.71
(271.9 mm)
8.86 (225 mm)
11.59
(294.4 mm)
6.85 (174.1 mm)
Safety Disconnect Switch Dimensions
ON
Dimensions & Accessories
Watertight Safety Disconnect Switches
8.54
(217 mm)
7.71
(195.9 mm)
8.94
(227.2 mm)
18.54
(471 mm)
OFF
17.72 (450 mm)
16.73
(424.9 mm)
12.88 (327.1 mm)
17.65
(448.4 mm)
60 AMP FUSED & 100 AMP NON-FUSED
Accessories for
Safety Disconnect Switches & Mechanical Interlocks
Auxiliary Contacts (Normally Closed - 10 Amp)
-Leviton Mechanical Interlocks and Disconnect Switches automatically ship with one factory installed auxiliary contact, normally open.
-A second auxiliary contact may be added. Select from the table
below.
APPLICATION
CATALOG NO.
30 Amp
(Non-Fused)
3145801
30 Amp
(Fused)
60 & 100 Amp
(Fused or Non-Fused)
3145807
Safety Disconnect Switch Dimensions & Accessories
ON
16.89 (428.9 mm)
5.71
(145 mm)
3.70
(94.1 mm)
8.49
(215.7 mm)
14.88 (378 mm)
9.37
(238 mm)
6.89
(175 mm)
3145807
3145801
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
10
Leviton Manufacturing Co., Inc.
59-25 Little Neck Parkway, Little Neck, NY 11362-2591
Telephone: 1-800-323-8920 • FAX: 1-800-832-9538
Tech Line (8:30AM-6:00PM E.S.T. Monday-Friday): 1-800-824-3005
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9
Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S.A. de C.V.
General Arista 54-A Col. Argentina, Mexico D.F., C.P. 11270
Telephone: 011-525-386-1131, 011-525-386-2052 • FAX: 011-525-386-1797
Visit us on the web at: www.leviton.com
© Copyright 2002 Leviton Manufacturing Co., Inc. All rights reserved.
sa