The Right Connection for
Class I
Division 2
Certified For Hazardous Locations
For applications that require C1/D2 certification, B+B SmartWorx
has a selection of connectivity and communication solutions
designed to operate in hazardous environments.
Class I/Division 2
Data Communications Equipment
for Safe Operation & Regulatory Compliance
Class I/Division 2 safety certification is a mandated requirement for devices in many industrial applications,
and for good reason. A Class I/Division 2 hazardous location is defined as an area in which flammable
gases, vapors or liquids may potentially be present. A Class I/Division 2 certified device is specifically
designed and manufactured to reduce the risk that it will produce an electrical discharge that could serve
as the ignition point for a fire or explosion.
From serial servers and media converters to network gateways and switches, B+B SmartWorx designs and
builds the Class I/Division 2 certified connectivity equipment you need to meet regulatory standards and
establish safe, reliable data communications in potentially hazardous environments.
Certified For
Hazardous Locations
2
Wzzard™ Intelligent Sensor Nodes
(WSD series)
• Connect your existing sensors and make them
wireless (standard analog input, digital input/output,
thermocouple)
• Integrated motion accelerometer and temperature
sensors
• Ultra low power – 802.15.4e SmartMesh IP or Bluetooth
4.0 LE
• Communicates with Spectre Network Gateway via
scalable and reliable wireless mesh networks
• Battery powered nodes
• Read or configure nodes via Android, iOS tablets,
smart phones using the Wzzard appplication
• Rugged, IP67, fiber reinforced polyester PBT enclosure
• Wide operating temperature
Wzzard™ APPLICATION STARTER Kits
(Energy Monitoring and more...)
• Includes: Spectre™ gateway, Wzzard™ mesh nodes,
application specific sensors, dashboard application
and accessories.
Certifications - SENSOR NODES & APPLICATION KITS
UL/CSA, Class I/Division 2, Groups A,B,C,D
EN55022 CISPR Class A
IEC EN 61000-4-2 – ESD +/- 8kV air, +/- 4kV contact
IEC EN 61000-4-3 – RFI
IEC EN 61000-4-4 – EFT
IEC EN 61000-4-5 – Surge
IEC EN 61000-4-6 – CI
IEC EN 61000-6-2 – Generic immunity standards for heavy industrial environments
IEC EN 61000-6-4 – Emission standards for heavy industrial environments
Industry Canada – RSS210
FCC Part 15 Class A, Part 15.247
CE
RoHS Directive (lead-free)
IEC 60068-2-6:2007 – Vibration
EN 60255-21-1 – Vibration
IEC 60068-2-27:2008 – Shock
EN 60255-21-2 – Shock
WEEE
Class I/Division 2 Rated
Spectre™ Cellular Routers
(RT3G series, RTLTE series)
•
•
•
•
•
•
Cellular router technologies: LTE and 3G
Ethernet, USB, I/O, Serial RS-232/422/485
WiFi access point
Wide operating temperature
Modbus compatible
Certified for use with multiple North American &
Canadian carriers
Certifications - Cellular Routers
UL Class I/Division 2
ETSI EN 300 342 – Immunity
ETSI EN 301 489-1 V1.8.1
ETSI EN 301 511, v9.0.2
ETSI EN 301 908-1&2, v3.2.1
EN55022 Class B – Emission (RT3G series)
EN55022 Class A – Emission (RTLTE series)
IEC EN 60950 – Safety
IEC EN 60747 – Isolation
FCC Part 15
CE
CARRIERS:
Verizon, AT&T, T-Mobile, Rogers, Telus (RT3G series)
Verizon, AT&T, T-Mobile (RTLTE series)
bb-smartworx.com
3
(Shown: 1 base I/O unit, with
3 expansion I/O modules)
Industrial Wireless I/O
(ZZxD series)
IP67 INDUSTRIAL Radio Modems & I/O
(Xtreme™ ZXT series)
•
•
•
•
•
•
Instant plug-n-play set-up
1-to-1 or 1-to-multipoint
AES encryption security
Modbus compatible
Wide temperature
IP67 rated case for outdoor applications
Certifications - RADIO MODEMS & I/O - ZXT series
UL, cULus, Class I/Division 2, Groups A,B,C,D (File # E245458)
NEMA TS2 (Radio Modems)
EN55022: 2006 Class A Emissions
IEC EN 61000-4-2 – ESD
IEC EN 61000-4-3 – RFI
IEC EN 61000-4-4 – EFT
IEC EN 61000-4-6 – CI
IEC EN 61000-6-1 – Immunity- residential, commercial, light industrial environments
FCC Class A
FCC ID (ZXT9-RM series Radio Modems – OUR-9XTEND)
FCC ID (ZXT24-RM series Radio Modems – OUR-XBEEPRO)
CE
RoHS Directive (lead-free)
Certified For
Hazardous Locations
4
• Low latency 15mS response rate
• 128/256-bit AES encryption
• Software selectable: RF transmit power & over-the-air
data rates
• Modbus compatible; Wide temperature
• Monitor and control analog/digital I/Os with C1/D2
snap-on modules
Certifications - STANDARD I/O - ZZxD series
UL/cULus, Class I/Division 2 (File # E24545), UL508 (File# E222870)
C1/D2 models:
ZZ24D-Nx-SR (2.4 GHz, short range), ZZ9D-Nx-LR (900 MHz,long range)
C1/D2 snap-on modules:
ZZ-2AI2AO, ZZ-4AI, ZZ-4AO, ZZ-4AO-2, ZZ-4DI4DO-DCT, ZZ-4DI4DO-DCT1, ZZ-4RTD1,
ZZ-8DI-DC, ZZ-8DO-R, ZZ-8DO-T, ZZ-8DO-T1, ZZ-PROG1-USB
IEC EN 61000-6-2 – Immunity standards - industrial environments
FCC Part 15 Class A
CE
RoHS Directive (lead-free)
Long Range Radio Modem & Kit
(ZP9D-115RM-LR model)
•
•
•
•
•
•
Up to 14mi/22km (40mi/64km w/optional antenna)
AES encryption security
Modbus compatible
Wide temperature
Dual power supply
IP30 case
Radio Modem Complete Kit
Certifications - standard RADIO MODEM & KITS
UL, cULus, Class I/Division 2, Groups A, B, C, D (File# E245458)
EN55022 CISPR Class B Emissions
IEC EN 61000-4-2 – ESD
IEC EN 61000-4-3 – RFI
IEC EN 61000-4-4 – EFT
IEC EN 61000-4-5 – Surge
IEC EN 61000-4-6 – CS
IEC EN 61000-4-8 – PFM
IEC EN 61000-4-11 – Voltage Dips & Interruptions
IEC EN 61000-6-1 – Immunity- residential, commercial, light industrial environments
FCC Part 15 Class B
CE
RoHS Directive (lead-free)
Ultra-Slim Ethernet Switches
Industrial Wired Routers
(ESW100 series)
•
•
•
•
•
5 or 8 ports
Copper, LC, SM/MM fiber port combinations
Redundant AC/DC power inputs
IP30 metal case, DIN or 6-way panel mount
Ultra compact, slimline
CERTIFICATIONS - ETHERNET SWITCHES - ESW100 series
UL/cUL, Class I/Division 2, Groups A,B,C,D
EN55022 – CISPR Class B Emissions
IEC EN 61000-4-2 – ESD
IEC EN 61000-4-3 – RFI
IEC EN 61000-4-4 – EFT
IEC EN 61000-4-5 – Surge
IEC EN 61000-4-6 – CI
IEC EN 61000-6-2 – Immunity standards - industrial environments
FCC
CE
RoHS Directive (lead-free)
IEEE 802.3x – Flow Fontrol
IEEE 802.3u – 100Base-TX & 100Base-FX Fast Ethernet
IEC 60068-2-6 – Vibration
IEC 60068-2-27 – Shock
IEC 60068-2-32 – Free Fall
(Spectre™ ERT31x series)
• Secure VPN with IPsec, OpenVPN, or L2TP
• DHCP, NAT, NAT-T, DynDNS, NTP, VRRP
• Firewall: filtering of addresses, ports, protocols
• Remote configuration and management
• VLAN 802.1Q: virtual LAN
• Wide temperature range: -40 to 75°C
CERTIFICATIONS - WIRED ROUTERS - ERT31x series
Class I/Division 2
NEMA TS1/TS2
ETSI EN 301 511, v9.0.2
ETSI EN 301 908-1&2, v3.2.1
ETSI EN 301 489-1 V1.8.1
EN 60950-1:06 ed.2 + A11:09 + A1:10
FCC
CE
RoHS Directive (lead-free)
IEC 60068-2-27 – Shock
IEC 60068-2-6 – Vibration
Power-over-Ethernet (PoE/ PoE+) Switches
(EIRHP305-T, EIRP305-24V-T models)
WIDE TEMPERATURE Ethernet Switches
(ESW200 series)
•
•
•
•
•
5 or 8 ports
Copper, LC/SC/ST, SM/MM fiber port combinations
Redundant AC/DC power inputs
IP30 metal case, DIN or 6-way panel mount
Wide temperature
CERTIFICATIONS - ETHERNET SWITCHES - ESW200 series
UL/cUL, Class I/Division 2, Groups A,B,C,D
EN55022 – CISPR Class B Emissions
IEC EN 61000-4-2 – ESD
IEC EN 61000-4-3 – RFI
IEC EN 61000-4-4 – EFT
IEC EN 61000-4-5 – Surge
IEC EN 61000-4-6 – CI
IEC EN 61000-6-2 – Immunity standards - industrial environments
FCC
CE
RoHS Directive (lead-free)
IEEE 802.3x – Flow Fontrol
IEEE 802.3u – 100Base-TX & 100Base-FX Fast Ethernet
IEC 60068-2-6 – Vibration
IEC 60068-2-27 – Shock
IEC 60068-2-32 – Free Fall
•
•
•
•
•
•
Simplifies powering of remote devices
Dual power inputs and alarm output
IP30 metal case, DIN or panel mount
Wide temperature
24 or 48VDC power (EIRP305-24V-T)
48VDC power (EIRHP305-T)
CERTIFICATIONS - PoE SWITCHES - #EIRHP305-T, #EIRP305-24V-T
UL/cULus, Class I/Division 2, Groups A,B,C,D (#Model EIRP-24V-T)
UL/cUL, Class I Division 2, Groups A,B,C,D File# E173795 (#Model EIRHP-305-T)
FCC
CE
RoHS directive (lead-free)
EN 61000-4-2 – ESD
EN 61000-4-3 – RFI
EN 61000-4-4 – EFT
EN 61000-4-5 – Surge
EN 61000-4-6 – CI
EN 61000-4-8 – PFM
EN 61000-6-2 – Immunity standards - industrial environments
EN 61000-6-4 – Emission standards - industrial environments
IEEE 802.3 – 10Base-T Ethernet
IEEE 802.3u – 100Base-TX & 100Base-FX Fast Ethernet
IEEE 802.3x – Flow Control & Back Pressure
IEEE 802.3af – Power-over-Ethernet
IEC 60068-2-6 – Vibration
IEC 60068-2-27 – Shock
IEC 60068-2-32 – Free Fall
bb-smartworx.com
5
Ethernet Serial DEVICE Servers
(VESR900 series)
•
•
•
•
Multi-serial-port (MEI), Ethernet port options
Automatically monitors, reconnects communications
Ethernet pass-through port option (VESR92x models)
Wide temperature
CERTIFICATIONS - Serial Servers - VeSR900 series
UL Listed (File# E222870)
UL Class1/Division 2 Groups A,B,C,D HAZLOC (File# E245458)
NEMA TS2 (Model# VESR901)
FCC
CE
RoHS Directive (lead-free)
Auto-negotiation & Auto MDI/MDX
IEEE 802.3, 803.u – (1) 10/100 Ethernet Port ((VESR92x models)
Ethernet Protocol Gateways
Modbus Ethernet Gateways
(MESR900 series)
•
•
•
•
•
Modbus TCP, RTU & ASCII
Serial/Ethernet, master/slave flexibility
Up to 16 Modbus TCP masters
Ethernet pass-through port option (MESR92x models)
Wide temperature
CERTIFICATIONS - MODBUS Gateways - MeSR900 series
UL Listed (File# E222870)
UL Class1/Division 2 Groups A,B,C,D, HAZLOC (File# E245458)
NEMA TS2 (Model# MESR901)
FCC
CE
RoHS Directive (lead-free)
Auto-negotiation & Auto MDI/MDX
IEEE 802.3, 803.u – (1) 10/100 Ethernet Port ((VESR92x models)
Ethernet Media Converters
(EIR-M-ST, EIR-M-SC, EIR-S-SC models)
(VFG series)
• Protocol converter, data logger, web interface with
virtual HMI - all in one
• Integrate multi-vendor systems, devices, protocols
• Built-in driver list for PLC, PC, SCADA system mapping
• Converts multiple protocols simultaneously
(up to 9 protocols with expansion card)
CERTIFICATIONS - PROTOCOL GATEWAys - VFG1000/2000/3000 series
cULus Listed, Class I/Division 2, Groups A,B,C,D, UL Listed, UL508
EMC EN 61326 – Immunity - control. lab, test & measurement
IEC EN 61000-4-2 – ESD
IEC EN 61000-4-3 – RFI
IEC EN 61000-4-4 – EFT
IEC EN 61000-4-5 – Surge
IEC EN 61000-4-6 – CS
EN 55011 – RF - industrial, scientific, medical, arc welding
FCC
CE
RoHS Directive (lead-free)
IEC 61010-1 – Measurement/Control/Laboratory
6
•
•
•
•
•
•
Convert copper signals to fiber
10/100Base
Redundant 10-48VDC power inputs
Auto negotiation - data rate & duplex modes
MDI/MDI-X (auto cross-over)
Wide temperature; IP30 metal case
CERTIFICATIONS - MEDIA CONVERTERS - #EIR-M-ST, #EIR-M-SC, #EIR-S-SC
UL60950-1, Class I/Division 2, Groups A,B,C,D for Hazardous Locations
NEMA TS1/TS2
EN60950-1
IEC EN 61000-4-2 (-3, -4, -5, -6, -8, -11)
IEC EN 61000-6-2 – Immunity standards - industrial environments
IEC EN 61000-6-3 – Emission - residential, commercial, light industrial environments
FCC Part 15, Class A
CE
RoHS Directive (lead-free)
IEC 60068-2-6 – Vibration
IEC 60068-2-27 – Shock
IEC 60068-2-32 – Free Fall
Hardened Converters & Repeaters
(485DRCi-PH, 232OPDRi-PH, 485OPDRi-PH, FOSTCDRi-PH-xx models)
•
•
•
•
•
3-way isolation
Wide temperature
Modbus compatible
IP30 case
Power utility, substation, oil, gas, traffic & more
Class I/Division 2 Rated
CERTIFICATIONS - SERIAL Converters & REpeaters
- #485DRCi-PH, #232OPDRi-PH, #485OPDRi-PH, #FOSTCDRi-PH-xx
UL, Class I/Division 2, File: E245458
NEMA TS1/2 (Models 485DRCI-PH, 232OPDRI-PH, 485OPDRI-PH, FOSTCDRI-PH-MT)
IEC EN 61000-4-2 – ESD
IEC EN 61000-4-3 – RFI
IEC EN 61000-4-4 – EFT
IEC EN 61000-4-5 – Surge
IEC EN 61000-4-6 – CS
IEC EN 61000-4-12 – Oscillatory
IEC EN 61000-4-16 – Disturbance
IEC EN 61000-4-17 – Ripple
FCC
CE
RoHS Directive (lead-free)
IEEE 1613 C37.90. (-1, -2, -3) – Electrical Power Substations
IEC 61850-3 – Power Utility Automation
IEC 60068-2-1 – Cold
IEC 60068-2-2 – Dry Heat
IEC 60068-2-30 – Damp Heat/Cyclic
IEC 60068-2-6 – Vibration
IEC 60068-2-27 – Shock
IEC 60068-2-32 – Free Fall
INDUSTRIAL USB Hubs
Class I/Division 2 Rated Accessories
(UHRx04 series)
•
•
•
•
•
•
USB 1.0/2.0 industrial--grade hubs
High retention USB connectors
Level 4 ESD protection - 15kV
Wide temperature
4kV isolation (#UHR204)
IP30 metal case
CERTIFICATIONS - USB HUBS - #UHR204, #UHR304
UL Listed, Class I/Division 2, Groups A,B,C,D (File: E245458)
Ind. Cont. Eq. for HAZ LOC, 3HTV, Temp Code:T4A
IEC EN 61000-4-2 – ESD
IEC EN 61000-4-3 – RFI
IEC EN 61000-4-4 – EFT
IEC EN 61000-4-5 – Surge
IEC EN 61000-4-6 – CS
IEC EN 61000-4-8 – PFM
IEC EN 61000-6-2 – Immunity standards - industrial environments
FCC Class B
CE
RoHS Directive (lead-free)
IEC 60068-2-6 – Vibration
IEC 60068-2-27 – Shock
IEC 60068-2-32 – Drop
Contact B+B, your distributor or channel partner for details.
•
•
•
•
•
Power supplies
NEMA TS1/TS2 enclosures & back panels
Cabling
Terminal blocks
DIN rail
Certified For
Hazardous Locations
7
Rugged, Reliable
Class I/Division 2
Data Networking
Global Reach for Global Support
In addition to our U.S. manufacturing, distribution, and customer
support operations, we have a manufacturing facility located in the
Czech Republic. Our European headquarters in Ireland provides
service, support and product availability for customers in Europe,
the Middle East, and Africa through a network of more than 40
qualified distributors. B+B SmartWorx products are also available
around the world through our expanding network of channel
partners, including value-added resellers and system integrators. All
B+B SmartWorx Ethernet products carry a limited life-time warranty
and a 30-day 100% satisfaction return policy.
Learn how B+B SmartWorx can create an Ethernet-based solution
for you by visiting us online or contacting us directly.
Find B+B products in more than
60 countries around the world
Talk to your favorite distributor about
B+B SmartWorx’ products, or to find a
channel partner near you, please go to
www.bb-smartworx.com
Latin America-Carribean
Contact: Fanny Scargle
Phone: 1-727-797-0300
Cell: 1-727-480-5920
Email:
fscargle@bb-smartworx.com
Skype: fscargle
4715