SNAPConnect
®
Savings and Productivity
Are Just a “SNAP” Away
Specification Grade
Receptacles
Hospital Grade
LED Power Indicating
Tamper-Resistant
Style Line ® Decorator
GFCI
USB Charging Receptacles
Isolated Ground
Surge Suppression
Switches
®
Wiring Device-Kellems
SNAPConnect® Installation Efficiency
Labor Savings
Save up to 5 Minutes
Table of Contents
Save One Minute
Rough-in the SNAPConnect® terminal instead
of pigtails
Receptacles
USB Charging
Receptacles . . . . . . . . . . 3
• Specification Grade
• Hospital Grade
Save Over Three Minutes
Remove protective packaging and SNAPConnect®
the device to the circuit
Extra Heavy Duty
Receptacles . . . . . . . . 4-5
Complete Trim-Out in Less Than One Minute
Secure mounting screws, attach wallplate and job
complete
• Hospital Grade
• Specification Grade
• Tamper-Resistant
• LED Power Indicator
Style Line® Decorator
Receptacles . . . . . . . . 6-7
• Hospital Grade
• Specification Grade
• Tamper-Resistant
• LED Power Indicator
GFCIs . . . . . . . . . . . . . . . 8
• Specification Grade
• Hospital Grade
• Tamper Weather Resistant
• Tamper Weather
Resistant Hospital Grade
Surge Receptacles and
Isolated Ground. . . . . . . . 9
• Tamper-Resistant
Commercial Grade
• Tamper-Resistant
Hospital Grade
Switches
Toggle Switches . . . . . . 10
• Specification Grade
• LED Illuminated
• Pilot Light
Style Line® Decorator. . 11
PWR
Power
Indicating
Used most
often to identify
emergency
circuits in
hospitals, the
two LED power
indicators,
bright enough
to be visible in
low light and
bright daylight
conditions,
identify face with
power.
TR
TamperResistant
Compliant with
NEC® 406.12 and
NEC®517-18(c),
SNAPConnect®
Tamper-Resistant
Receptacles are
acceptable for
use in residential
dwellings
and pediatric
locations.
• Specification Grade
• LED Illuminated
• Pilot Light
Many of these products
are Assembled in USA, as
indicated, and many are Buy
American Compliant.
Please contact Hubbell with
any certification requirements.
2
Isolated
Ground
Surge
Suppression
SNAPConnect®
Isolated Ground
devices provide
a clean ground
path for sensitive
equipment.
Devices are
available with
power indication,
tamper-resistant
or a combination
of both.
SpikeShield®
SNAPConnect®
TamperResistant Surge
receptacles
provide excellent
point of use
protection
for sensitive
electronic loads
from every day
power spikes and
surges.
USB
Charger
Receptacles
SNAPConnect®
USB Charger
provides USB
power in a
standard single
gang electrical
opening.
Designed to
provide maximum
charging
for portable
electronics.
SNAPConnect® Receptacles
®
Wiring Device-Kellems
SNAPConnect® USB Charger Duplex Receptacle
Features and Benefits
• 3 Amps of USB Capacity
Charge Multiple Portable Devices Simultaneously
•
Green LED Indicator Lights when Charging
•
Heavy Duty Stainless Steel USB Ports; Rated for
Minimum 10,000 Cord Insertions and Removals
•Works with Standard SNAPConnect® Receptacle
Pigtailed Connector
Applications
• Universities
• Hotels
• Hospitals
• Medical labs
• Restaurants
• Airports
• Classrooms
• Residential
Designed for
use with
This outlet is capable of delivering up to 3 Amps, 5V DC of USB power. If multiple portable
devices are plugged in the individual ports will allocate power as determined by the portable
devices. Suitable for use on circuits with AFCI and GFCI protection.
•Apple® Products
•Digital Readers
•Tablet Computers
•Smart Phones
•MP3 Players
•GPS
•Other USB compatible
products
SNAPConnect® Extra Heavy Duty Duplex Receptacles
Standard and Tamper-Resistant
Standard
Hospital Grade
Specification Grade
20A 125V
Color
15A 125V
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP15USBBK
SNAP15USB
SNAP15USBGY
SNAP15USBI
SNAP15USBLA
—
SNAP15USBW
SNAP20USBBK
SNAP20USB
SNAP20USBGY
SNAP20USBI
SNAP20USBLA
—
SNAP20USBW
Specification Grade Tamper Resistant
15A 125V
20A 125V
SNAP8200USBBK
SNAP8200USB
SNAP8200USBGY
SNAP8200USBI
SNAP8200USBLA
SNAP8200USBR
SNAP8200USBW
SNAP8300USBBK
SNAP8300USB
SNAP8300USBGY
SNAP8300USBI
SNAP8300USBLA
SNAP8300USBR
SNAP8300USBW
SNAP15USBW SNAP8300USBW
SNAPConnect® Right Angle Pigtailed Connector, 600V
Description
Wire Type
General Use
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RA
3
SNAPConnect® Receptacles
Extra Heavy Duty Hospital Grade Duplex Receptacles
Features and Benefits
•
Available in Standard, Tamper-Resistant and
LED Power Indicating Versions
•
Abuse Resistant Nylon for Extra Heavy
Use Applications
•
Stainless Steel Autoground
•
Assembled in USA
Applications
• Hospitals
• Healthcare Facilities
• Outpatient Care Centers
• Urgent care Offices
• Labs
• Commercial Construction
•
SNAPConnect® Eliminates
Exposed Live Terminals on
the Device
NEC® Article 517.41 requires receptacles on the emergency circuit to be readily identified by color or
wall plate markings. LED power indicators provide instant, visual assurance that power is available at
the receptacle. “SNAPConnect® Hospital Grade TR receptacles comply with NEC® section 517.18(C)
requiring receptacles located within the rooms, bathrooms, playrooms, activity rooms, and patient care
areas of designated pediatric locations to be listed tamper resistant.”
SNAPConnect® Extra Heavy Duty Hospital Grade
Standard and Tamper-Resistant Duplex Receptacles
Finder Groove Face
Color
15A 125V
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKA*
SNAP8200A*
SNAP8200GYA*
SNAP8200IA*
SNAP8200LAA*
SNAP8200RA*
SNAP8200WA*
SNAP8200IA SNAP8300LATR
Smooth Face
Hospital Grade
20A 125V
SNAP8300BKA*
SNAP8300A*
SNAP8300GYA*
SNAP8300IA*
SNAP8300LAA*
SNAP8300RA*
SNAP8300WA*
Hospital Grade
15A 125V
* For Assembled in USA receptacles drop off the last “A”
and add suffix NA. Ex: SNAP8200BKNA.
SNAP8200BKTR
SNAP8200TR
SNAP8200GYTR
SNAP8200ITR
SNAP8200LATR
SNAP8200RTR
SNAP8200WTR
Tamper Resistant
20A 125V
SNAPConnect® Extra Heavy Duty Hospital Grade
Standard and Tamper-Resistant Duplex Receptacles
with Power Indicating LED
Power
PWR Indicating
Smooth Face
SNAP8300L
SNAP8300RLTR
Color
15A 125V
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKL
SNAP8200L
SNAP8200GYL
SNAP8200IL
SNAP8200LAL
SNAP8200RL
SNAP8200WL
Hospital Grade
20A 125V
SNAP8300BKL
SNAP8300L
SNAP8300GYL
SNAP8300IL
SNAP8300LAL
SNAP8300RL
SNAP8300WL
Hospital Grade
15A 125V
SNAP8200BKLTR
SNAP8200LTR
SNAP8200GYLTR
SNAP8200ILTR
SNAP8200LALTR
SNAP8200RLTR
SNAP8200WLTR
Tamper Resistant
20A 125V
Description
Wire Type
General Use
Assembled in USA
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
4
TR
SNAP8300BKLTR
SNAP8300LTR
SNAP8300GYLTR
SNAP8300ILTR
SNAP8300LALTR
SNAP8300RLTR
SNAP8300WLTR
SNAPConnect® Right Angle Pigtailed Connector, 600V
SNAP1RA
TR
SNAP8300BKTR
SNAP8300TR
SNAP8300GYTR
SNAP8300ITR
SNAP8300LATR
SNAP8300RTR
SNAP8300WTR
SNAPConnect® Receptacles
®
Wiring Device-Kellems
Extra Heavy Duty Specification Grade Duplex Receptacles
Features and Benefits
•
Available in Standard, Tamper-Resistant and
LED Power Indicating Versions
•
Abuse Resistant Nylon for Extra Heavy Use
Applications
•
Stainless Steel Autoground
•
Assembled in USA
•
SNAPConnect® Eliminates
Exposed Live Terminals
on the Device
Applications
• Education
• Hospitality
• Commercial Construction
• Pre-Fab Assembly
• OEM
SNAPConnect® TR receptacles comply with the 2011 NEC® requiring tamper resistant receptacles
in dwelling units, child care facilities, guest rooms, and guest suites. (NEC® Articles: 406.4, 406.12,
406.14, 406.16)
SNAPConnect® Extra Heavy Duty Duplex Receptacles
Standard and Tamper-Resistant
Finder Groove Face
Smooth Face
Specification Grade
20A 125V
Color
15A 125V
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
SNAP5262BKA*
SNAP5262BL*
SNAP5262A*
SNAP5262GYA*
SNAP5262IA*
SNAP5262LAA*
SNAP5262RA*
SNAP5262WA*
SNAP5362BKA*
SNAP5362BL*
SNAP5362A*
SNAP5362GYA*
SNAP5362IA*
SNAP5362LAA*
SNAP5362RA*
SNAP5362WA*
Specification Grade Tamper Resistant
15A 125V
20A 125V
* For Assembled in USA receptacles drop off the last “A”
and add suffix NA. Ex: SNAP5262BKNA.
SNAP5262BKTR
SNAP5262BLTR
SNAP5262TR
SNAP5262GYTR
SNAP5262ITR
SNAP5262LATR
SNAP5262RTR
SNAP5262WTR
SNAPConnect® Extra Heavy Duty Duplex Receptacles
with Power Indicating LED
Specification Grade
20A 125V
15A 125V
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
SNAP5262BKL
SNAP5262BLL
SNAP5262L
SNAP5262GYL
SNAP5262IL
SNAP5262LAL
SNAP5262RL
SNAP5262WL
SNAP5362BKL
SNAP5362BLL
SNAP5362L
SNAP5362GYL
SNAP5362IL
SNAP5362LAL
SNAP5362RL
SNAP5362WL
SNAP5262IA SNAP5362LATR
Power
PWR Indicating
Smooth Face
Color
TR
SNAP5362BKTR
SNAP5362BLTR
SNAP5362TR
SNAP5362GYTR
SNAP5362ITR
SNAP5362LATR
SNAP5362RTR
SNAP5362WTR
Specification Grade Tamper Resistant
15A 125V
20A 125V
SNAP5262BKLTR
SNAP5262BLLTR
SNAP5262LTR
SNAP5262GYLTR
SNAP5262ILTR
SNAP5262LALTR
SNAP5262RLTR
SNAP5262WLTR
TR
SNAP5362BKLTR
SNAP5362BLLTR
SNAP5362LTR
SNAP5362GYLTR
SNAP5362ILTR
SNAP5362LALTR
SNAP5362RLTR
SNAP5362WLTR
SNAP5362LAL SNAP5362GYLTR
SNAPConnect® Right Angle Pigtailed Connector, 600V
Description
Wire Type
General Use
Assembled in USA
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
SNAP1RA
5
SNAPConnect® Receptacles
Extra Heavy Duty Hospital Grade Style Line®
Decorator Receptacles
Features and Benefits
•
Available in Standard, Tamper-Resistant and
LED Power Indicating Versions
•
Abuse Resistant Nylon for Extra Heavy
Use Applications
•
Stainless Steel Autoground
•
Assembled in USA
Applications
•Hospitals
• Healthcare Facilities
• Labs
• Long Term Care
• Commercial Construction
•
SNAPConnect® Eliminates
Exposed Live Terminals on
the Device
NEC® Article 517.41 requires receptacles on the emergency circuit to be readily identified by color or
wall plate markings. LED power indicators provide instant, visual assurance that power is available at
the receptacle. “SNAPConnect® Hospital Grade TR receptacles comply with NEC® section 517.18(C)
requiring receptacles located within the rooms, bathrooms, playrooms, activity rooms, and patient care
areas of designated pediatric locations to be listed tamper resistant.”
SNAPConnect® Extra Heavy Duty Hospital Grade Style Line® Decorator
Standard and Tamper-Resistant Duplex Receptacles
Color
15A 125V
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKA*
SNAP2172A*
SNAP2172GYA*
SNAP2172IA*
SNAP2172LAA*
SNAP2172RA*
SNAP2172WA*
Hospital Grade
20A 125V
Hospital Grade
15A 125V
SNAP2182BKA*
SNAP2182A*
SNAP2182GYA*
SNAP2182IA*
SNAP2182LAA*
SNAP2182RA*
SNAP2182WA*
SNAP2172BKTR
SNAP2172TR
SNAP2172GYTR
SNAP2172ITR
SNAP2172LATR
SNAP2172RTR
SNAP2172WTR
Tamper Resistant
20A 125V
* For Assembled in USA receptacles, drop off the last “A”
and add suffix NA. Ex: SNAP2172BKNA.
SNAP2182WA SNAP2182ITR
SNAPConnect® Extra Heavy Duty Hospital Grade Style Line® Decorator
Standard and Tamper-Resistant Duplex Receptacles
with Power Indicating LED
SNAP2182RL SNAP2182GYLTR
Color
15A 125V
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKL
SNAP2172L
SNAP2172GYL
SNAP2172IL
SNAP2172LAL
SNAP2172RL
SNAP2172WL
Hospital Grade
20A 125V
SNAP2182BKL
SNAP2182L
SNAP2182GYL
SNAP2182IL
SNAP2182LAL
SNAP2182RL
SNAP2182WL
Hospital Grade
15A 125V
SNAP2172BKLTR
SNAP2172LTR
SNAP2172GYLTR
SNAP2172ILTR
SNAP2172LALTR
SNAP2172RLTR
SNAP2172WLTR
Tamper Resistant
20A 125V
Description
Wire Type
General Use
Assembled in USA
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
6
Power
PWR Indicating
TR
SNAP2182BKLTR
SNAP2182LTR
SNAP2182GYLTR
SNAP2182ILTR
SNAP2182LALTR
SNAP2182RLTR
SNAP2182WLTR
SNAPConnect® Right Angle Pigtailed Connector, 600V
SNAP1RA
TR
SNAP2182BKTR
SNAP2182TR
SNAP2182GYTR
SNAP2182ITR
SNAP2182LATR
SNAP2182RTR
SNAP2182WTR
SNAPConnect® Receptacles
®
Wiring Device-Kellems
Extra Heavy Duty Specification Grade Duplex Receptacles
Features and Benefits
•
Available in Standard, Tamper-Resistant and
LED Power Indicating Versions
•
Abuse Resistant Nylon for Extra Heavy Use
Applications
•
Stainless Steel Autoground
•
Assembled in USA
•
SNAPConnect® Eliminates
Exposed Live Terminals
on the Device
Applications
• Education
• Hospitality
• Commercial Construction
• Pre-Fab Assembly
• OEM
SNAPConnect® TR receptacles comply with the 2011 NEC® requiring tamper resistant receptacles
in dwelling units, child care facilities, guest rooms, and guest suites. (NEC® Articles: 406.4, 406.12,
406.14, 406.16)
SNAPConnect® Extra Heavy Duty Style Line® Decorator
Standard and Tamper-Resistant Duplex Receptacles
Specification Grade
20A 125V
Color
15A 125V
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2152BKA*
—
SNAP2152A*
SNAP2152GYA*
SNAP2152IA*
SNAP2152LAA*
SNAP2152RA*
SNAP2152WA*
Specification Grade Tamper Resistant
15A 125V
20A 125V
SNAP2162BKA*
—
SNAP2162A*
SNAP2162GYA*
SNAP2162IA*
SNAP2162LAA*
SNAP2162RA*
SNAP2162WA*
SNAP2152BKTR
SNAP2152BLTR
SNAP2152TR
SNAP2152GYTR
SNAP2152ITR
SNAP2152LATR
SNAP2152RTR
SNAP2152WTR
TR
SNAP2162BKTR
SNAP2162BLTR
SNAP2162TR
SNAP2162GYTR
SNAP2162ITR
SNAP2162LATR
SNAP2162RTR
SNAP2162WTR
For Assembled in USA receptacles drop off the last “A”
and add suffix NA. Ex: SNAP2152BKNA.
SNAP2152BKA SNAP2162ITR
SNAPConnect® Extra Heavy Duty Style Line® Decorator
Standard and Tamper-Resistant Duplex Receptacles
with Power Indicating LED
Color
15A 125V
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2152BKL
SNAP2152BLL
SNAP2152L
SNAP2152GYL
SNAP2152IL
SNAP2152LAL
SNAP2152RL
SNAP2152WL
Specification Grade
20A 125V
SNAP2162BKL
SNAP2162BLL
SNAP2162L
SNAP2162GYL
SNAP2162IL
SNAP2162LAL
SNAP2162RL
SNAP2162WL
Power
PWR Indicating
Specification Grade Tamper Resistant
15A 125V
20A 125V
SNAP2152BKLTR
SNAP2152BLLTR
SNAP2152LTR
SNAP2152GYLTR
SNAP2152ILTR
SNAP2152LALTR
SNAP2152RLTR
SNAP2152WLTR
TR
SNAP2162BKLTR
SNAP2162BLLTR
SNAP2162LTR
SNAP2162GYLTR
SNAP2162ILTR
SNAP2162LALTR
SNAP2162RLTR
SNAP2162WLTR
SNAP2162GYL
SNAPConnect® Right Angle Pigtailed Connector, 600V
Description
Wire Type
General Use
Assembled in USA
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
SNAP1RA
7
SNAP2162RLTR
SNAPConnect® Receptacles
Heavy Duty Specification Grade Ground Fault Receptacles
Features and Benefits
•
Attractive Flush Fit with Wallplate
•
Shallow Box Depth - More Room for Wiring
•
Assembled in USA
•
Meets UL Federal Specification WC596
Applications
• Healthcare Facilities
• Education
• Hospitality
• Commercial Construction
• Pre-Fab Assembly
• OEM
•
TR/WR Versions Meet NEC® Code
for Tamper and Weather Resistant
•
SNAPConnect® Eliminates
Exposed Live Terminals
on the Device
Ground Fault Indicator’s flashing Red
LED indicates that the receptacle has
lost capacity to provide protection.
SNAPConnect® Heavy Duty Specification Grade GFCI
LED Indicates Need to Replace Receptacle
GFR8200SNAPINA
GFR15SNAPINA
Hospital Grade
20A 125V
Color
15A 125V
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFR8200SNAPBKNA
GFR8200SNAPNA
GFR8200SNAPGYNA
GFR8200SNAPINA
GFR8200SNAPLANA
GFR8200SNAPRNA
GFR8200SNAPWNA
15A 125V
GFR8300SNAPBKNA
GFR8300SNAPNA
GFR8300SNAPGYNA
GFR8300SNAPINA
GFR8300SNAPLANA
GFR8300SNAPRNA
GFR8300SNAPWNA
Specification Grade
20A 125V
GFR15SNAPBKNA
GFR15SNAPNA
GFR15SNAPGYNA
GFR15SNAPINA
GFR15SNAPLANA
GFR15SNAPRNA
GFR15SNAPWNA
GFR20SNAPBKNA
GFR20SNAPNA
GFR20SNAPGYNA
GFR20SNAPINA
GFR20SNAPLANA
GFR20SNAPRNA
GFR20SNAPWNA
SNAPConnect® Heavy Duty Tamper/Weather Resistant Specification Grade GFCI
LED Indicates Need to Replace Receptacle
Color
GFTR8300SNAPINA
Black
Brown
Gray
Ivory
Light Almond
Red
GFTR20SNAPINA White
15A 125V
Hospital Grade
20A 125V
GFTR8200SNAPBKNA
GFTR8200SNAPNA
GFTR8200SNAPGYNA
GFTR8200SNAPINA
GFTR8200SNAPLANA
GFTR8200SNAPRNA
GFTR8200SNAPWNA
TR
WR
GFTR8300SNAPBKNA
GFTR8300SNAPNA
GFTR8300SNAPGYNA
GFTR8300SNAPINA
GFTR8300SNAPLANA
GFTR8300SNAPRNA
GFTR8300SNAPWNA
15A 125V
Specification Grade
20A 125V
GFTR15SNAPBKNA
GFTR15SNAPNA
GFTR15SNAPGYNA
GFTR15SNAPINA
GFTR15SNAPLANA
GFTR15SNAPRNA
GFTR15SNAPWNA
TR
SNAPConnect® Right Angle Pigtailed Connector, 600V
SNAP1RNA
Description
Wire Type
General Use
Assembled in USA
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
8
WR
GFTR20SNAPBKNA
GFTR20SNAPNA
GFTR20SNAPGYNA
GFTR20SNAPINA
GFTR20SNAPLANA
GFTR20SNAPRNA
GFTR20SNAPWNA
SNAPConnect® Receptacles
®
Wiring Device-Kellems
Heavy Duty Specification Grade
Surge Protection and Isolated Ground Receptacles
Features and Benefits
•
Attractive Flush Fit with Wallplate
•
Shallow Box Depth - More Room for Wiring
•
IG Receptacles Meet UL Federal Specification WC596
•
TR Versions Meet NEC® Code for Tamper-Resistant
•
SNAPConnect® Eliminates Exposed Live
Terminals on the Device
Applications
• Healthcare Facilities
• Education
• Hospitality
• Commercial Construction
• Pre-Fab Assembly
• OEM
SNAPConnect® TR Surge Protection Receptacle with Power Indicating LED
Hospital Grade
20A 125V
Color
15A 125V
Blue
Gray
Ivory
Light Almond
Red
White
SNAP8262S
SNAP8262GYS
SNAP8262IS
SNAP8262LAS
SNAP8262RS
SNAP8262WS
TR
SNAP8362S
SNAP8362GYS
SNAP8362IS
SNAP8362LAS
SNAP8362RS
SNAP8362WS
Power
PWR Indicating
Specification Grade
20A 125V
15A 125V
SNAP5262S
SNAP5262GYS
SNAP5262IS
SNAP5262LAS
—
SNAP5262WS
TR
SNAP5362S
SNAP5362GYS
SNAP5362IS
SNAP5362LAS
—
SNAP5362WS
SNAP8362GYS
SNAP5362S
SNAP8300IGTR
SNAP2162IGTR
SNAP8300IGL
SNAP2162IGL
SNAP8300IGLTR
SNAP2162IGLTR
SNAPConnect® Tamper-Resistant Isolated Ground Receptacle
15A 125V
Hospital Grade
20A 125V
TR
Specification Grade
20A 125V
15A 125V
TR
Style
Color
Duplex
Orange SNAP8200IGTR
Red
SNAP8200RIGTR
SNAP8300IGTR
SNAP8300RIGTR
SNAP5262IGTR
—
SNAP5362IGTR
—
Style Line®/ Orange SNAP2172IGTR
Decorator Red
SNAP2172RIGTR
SNAP2182IGTR
SNAP2182RIGTR
SNAP2152IGTR
—
SNAP2162IGTR
—
Power
PWR Indicating
SNAPConnect® Isolated Ground Receptacle with Power Indicating LED
15A 125V
Hospital Grade
20A 125V
Specification Grade
20A 125V
15A 125V
Style
Color
Duplex
Orange
Red
SNAP8200IGL
SNAP8200RIGL
SNAP8300IGL
SNAP8300RIGL
SNAP5262IGL
—
SNAP5362IGL
—
Style Line®/ Orange
Decorator Red
SNAP2172IGL
SNAP2172RIGL
SNAP2182IGL
SNAP2182RIGL
SNAP2152IGL
—
SNAP2162IGL
—
SNAPConnect® TR Isolated Ground Receptacle with Power Indicating LED
Style
Duplex
Color
Orange
Red
Style Line®/ Orange
Decorator Red
15A 125V
Hospital Grade
20A 125V
SNAP8200IGLTR
SNAP8200RIGLTR
SNAP2172IGLTR
SNAP2172RIGLTR
TR
SNAP8300IGLTR
SNAP8300RIGLTR
SNAP2182IGLTR
SNAP2182RIGLTR
15A 125V
Power
PWR Indicating
Specification Grade
20A 125V
SNAP5262IGLTR
—
SNAP2152IGLTR
—
TR
SNAP5362IGLTR
—
SNAP2162IGLTR
—
SNAPConnect® Right Angle Pigtailed Connector, 600V
Description
Wire Type
General Use
Clear right angle terminal with 6 inch leads #12 AWG THHN/THWN-2;
Polycarbonate housing material
Solid
Stranded
SNAP1RA
SNAP2RA
9
SNAPConnect® Switches
Specification Grade Toggle Series Switches
Features and Benefits
Applications
• Healthcare Facilities
• Education
• Hospitality
• Commercial Construction
• Pre-Fab Assembly
•
Abuse Resistant Nylon Toggle for Heavy Use
Applications
•
Stainless Steel Autoground
•
Incorporates LED Technology for Illuminated and
Pilot Light
•
Assembled in USA
•
SNAPConnect® Eliminates
Exposed Live Terminals
on the Device
SNAPConnect® Specification Grade Toggle Series
15A, 120-277V AC
20A, 120-277V AC
Description
Toggle Color
Single Pole
Three Way
Single Pole
Three Way
SNAPConnect®
Nylon Toggle.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP1201BKNA
SNAP1201BRNA
SNAP1201GYNA
SNAP1201INA
SNAP1201LANA
SNAP1201RNA
SNAP1201WNA
SNAP1203BKNA
SNAP1203BRNA
SNAP1203GYNA
SNAP1203INA
SNAP1203LANA
SNAP1203RNA
SNAP1203WNA
SNAP1221BKNA
SNAP1221BRNA
SNAP1221GYNA
SNAP1221INA
SNAP1221LANA
SNAP1221RNA
SNAP1221WNA
SNAP1223BKNA
SNAP1223BRNA
SNAP1223GYNA
SNAP1223INA
SNAP1223LANA
SNAP1223RNA
SNAP1223WNA
SNAP1201INA
SNAPConnect® Specification Grade Illuminated Toggle Series
15A, 120-277V AC
Description
Toggle Color
Illuminated Blue
Black
LED, Light On with Ivory
Load Off, Toggle. Red
White
SNAP1221ILBKNA
Single Pole
20A, 120-277V AC
Three Way
SNAP1201ILBKNA
SNAP1201ILINA
SNAP1201ILRNA
SNAP1201ILWNA
—
—
—
—
Single Pole
Three Way
SNAP1221ILBKNA
SNAP1221ILINA
SNAP1221ILRNA
SNAP1221ILWNA
—
—
—
—
SNAPConnect® Specification Grade Pilot Light Toggle Series
15A, 120-277V AC
Description
Toggle Color
Single Pole
Pilot Red LED,
Light On
with Load On,
Toggle.
Black
Ivory
Red
White
SNAP1201PLBKNA
SNAP1201PLINA
SNAP1201PLRNA
SNAP1201PLWNA
20A, 120-277V AC
Three Way
—
—
—
—
Single Pole
Three Way
SNAP1221PLBKNA
SNAP1221PLINA
SNAP1221PLRNA
SNAP1221PLWNA
—
—
—
—
SNAPConnect® Jumper/Tester
SNAP1201PLINA
20A, 120-277V AC
Description
Single Pole
Three Way
Jumper/Tester, Black Toggle, Blue LED Indicator.
SNAPSWJUMP
SNAP3WJUMP
SNAPConnect® Switch Pigtailed Connector
SNAPSWJUMP
Description
Wire Type
Single Pole
(3 Wires)
Single Pole
with Pilot
3 Way
(4 Wires)
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate housing material
Solid
Stranded
SNAPSP1NA
SNAPSP2NA
SNAPSPP1NA
SNAPSPP2NA
SNAP3W1NA
SNAP3W2NA
10
SNAPConnect® Switches
®
Wiring Device-Kellems
Specification Grade Decorator Series Switches
Features and Benefits
•
Abuse Resistant Thermoplastic Rocker for
Heavy Use Applications
•
Stainless Steel Autoground
•
Incorporates LED Technology for Illuminated
and Pilot Light
•
Assembled in USA
•
SNAPConnect® Eliminates
Exposed Live Terminals
on the Device
Applications
• Education
• Hospitality
• Commercial Construction
• Pre-Fab Assembly
SNAPConnect® Specification Grade Style Line® Decorator Series
15A, 120-277V AC
20A, 120-277V AC
Description
Toggle Color
Single Pole
Three Way
Single Pole
Three Way
SNAPConnect®
Rocker.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2101BKNA
SNAP2101BRNA
SNAP2101GYNA
SNAP2101INA
SNAP2101LANA
SNAP2101RNA
SNAP2101WNA
SNAP2103BKNA
SNAP2103BRNA
SNAP2103GYNA
SNAP2103INA
SNAP2103LANA
SNAP2103RNA
SNAP2103WNA
SNAP2121BKNA
SNAP2121BRNA
SNAP2121GYNA
SNAP2121INA
SNAP2121LANA
SNAP2121RNA
SNAP2121WNA
SNAP2123BKNA
SNAP2123BRNA
SNAP2123GYNA
SNAP2123INA
SNAP2123LANA
SNAP2123RNA
SNAP2123WNA
SNAP1201INA
SNAPConnect® Specification Grade Illuminated Style Line® Decorator Series
15A, 120-277V AC
Description
Toggle Color
Illuminated Blue
Black
LED, Light On with Ivory
Load Off, Rocker. Red
White
20A, 120-277V AC
Single Pole
Three Way
Single Pole
Three Way
SNAP2101ILBKNA
SNAP2101ILINA
SNAP2101ILRNA
SNAP2101ILWNA
SNAP2103ILBKNA
SNAP2103ILINA
SNAP2103ILRNA
SNAP2103ILWNA
SNAP2121ILBKNA
SNAP2121ILINA
SNAP2121ILRNA
SNAP2121ILWNA
SNAP2123ILBKNA
SNAP2123ILIna
SNAP2123ILRNA
SNAP2123ILWNA
SNAP2101ILINA
SNAPConnect® Specification Grade Pilot Light Style Line® Decorator Series
15A, 120-277V AC
Description
Toggle Color
Single Pole
Pilot Red LED,
Light On
with Load On,
Rocker.
Black
Ivory
Red
White
SNAP2101PLBKNA
SNAP2101PLINA
SNAP2101PLRNA
SNAP2101PLWNA
20A, 120-277V AC
Three Way
Single Pole
—
—
—
—
Three Way
SNAP2121PLBKNA
SNAP2121PLINA
SNAP2121PLRNA
SNAP2121PLWNA
—
—
—
—
SNAP2101PLINA
SNAPConnect® Switch Pigtailed Connector
Description
Wire Type
Single Pole
(3 Wires)
Single Pole
with Pilot
3 Way
(4 Wires)
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate housing material
Solid
Stranded
SNAPSP1NA
SNAPSP2NA
SNAPSPP1NA
SNAPSPP2NA
SNAP3W1NA
SNAP3W2NA
11
SNAPConnect®
Scan to watch the introductory SNAPConnect® video.
Visit http://www.hubbell-wiring.com/installation_efficiency.aspx to access
Hubbell’s Installation Efficiency/Contractor Productivity Solutions website.
Hubbell Installation Efficiency Product Solutions
Installation
Efficiency Guide
Hubbell Installation
Efficiency Guide provides
in-depth information
on a variety of Hubbell
products that offer superior
installation efficiency for
new construction and
renovation, data centers,
and maintenance, repair
and operation (MRO)
applications.
Hubbell Solutions
Pre-Wired Raceway
Factory Pre-Wired
Solutions
Pre-Fab Solutions
CONNEXION
Healthcare
Durability - Through years of
innovation and commitment
to superior quality, Hubbell
devices maintain their
performance regardless how
many times equipment is
connected or disconnected.
Safety - Safety of patients,
visitors and healthcare
workers is a number one
concern for hospitals. Hubbell
takes safety seriously,
providing a variety of products
that ensure superior protection
of people and property.
Performance - Large
healthcare networks
depend on the reliability of
infrastructure in their outpatient
facilities to accomplish
diagnostics and testing.
Energy Efficiency - Modern
education facilities incorporate
new technologies such as
energy efficient lighting
controls, reducing energy
consumption and costs.
Installation Efficiency Designed to provide efficient
installation, deployment and
replacement that ultimately
help schools complete new
and retrofit projects faster while
reducing overall costs.
Education
Delivery - Technology is
helping engage students,
improve teaching, and facilitate
communication. Hubbell’s
power, data and AV delivery
solutions support everything
from smartboards and projector
systems, to computers and
networking equipment.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484
Phone (800) 288-6000 • FAX (800) 255-1031
Printed in U.S.A. Specifications subject to change without notice.
SNAPConnect® , Style Line® are registered trademarks of Hubbell Incorporated. SpikeShield is a trademark of Hubbell Incorporated.
WLBSB004R 7/14