price list - Finn Enterprise Ltd

advertisement
P R ICE L IS T
Finland
Delivery program No. 70
Valid from 30.10.2014
P L E A SE NO T E
Customer price list for new guns and accessories.
Prices are in Euro including 24 % VAT.
Delivery program No. 70
Valid from 01.08.2014
As we continuously work to improve our product line, we
ask for your understanding that features and technical information may vary slightly on the final product. Goods
remain property of Krieghoff until full payment has been
received. We reserve the right to make any changes to
price, design, technical aspects, color and/or accessories
supplied with any of the products described in this price
list.
Purchaser must possess a valid firearm permit.
Our general terms and conditions apply to all orders
(www.krieghoff.de/agb/agb-en.pdf).
The place of jurisdiction for both parties is Ulm.
All information supplied is without guarantee.
All rights reserved.
H. Krieghoff GmbH
Hunting and Sporting Arms
Boschstrasse 22 · 89079 Ulm
Germany
Phone: +49 (0) 7 31 / 4 01 82-0
Fax: +49 (0) 7 31 / 4 01 82-800
info@krieghoff.de
K R IEGHOF F IMP OR T ER
CON T EN T S
I.
II.
III.
IV.
V.
VI.
VII.
Krieghoff Optima
Drilling, double rifle drilling and “Big Five” double rifle
drilling
2
Krieghoff Ultra
Over & under rifle/shotgun combination, over & under double
rifle and “Bergstutzen”
8
Krieghoff Classic
Side-by-side double rifle and“Big Five” side-by-side double rifle,
side-by-side rifle/shotgun combination and side-by-side shotgun
Krieghoff Hubertus
Single shot rifle
18
Krieghoff Semprio
In-Line repeater
22
Krieghoff Trumpf
Drilling and double rifle drilling
26
Competition shotguns
K-80 over & under shotgun
K-20 over & under shotgun
KX-6 single barrel shotgun
31
34
34
VIII. Krieghoff Essencia
Side-by-side sidelock shotgun
Single shot sidelock rifle
“Big Five” side-by-side sidelock double rifle
IX.
X.
XI.
13
40
41
42
Engravings
Hunting guns
Semprio
Competition shotguns
43
46
47
Various
Service and options
Appendix
55
58
Memo 61
1
OP T IM A
K R IEGHOF F OP T IM A
Krieghoff Optima
Drilling shown with additional options
Engraving: “Large game scene with leaf arabesques”
Optima standard configuration:
▶ Set trigger integrated in the front trigger
▶ Universal Trigger System
▶ Combi-Cocking Device
▶ Steel trigger guard
▶ Front plate for pivot bridge mount 1
▶ Steel shot proofed depending on choke size and
material of the receiver
▶ Quick detachable sling swivels
▶
▶
▶
▶
▶
▶
Nickel plated receiver finish
Ornamental line engraving borders receiver
Hinge screws, top latch, screws and pins
are blued
Standard wood
Right-handed stock with Bavarian-style
cheekpiece 1 and “Schnabel” forearm
Supplied in Krieghoff GunPack
Optima 12 and 20 drilling thermo stable
6.910,00 €
Action available in steel or duraluminium; standard barrel length: 55 cm (22");
standard stock length: 37 cm (14.5"), incl. 15 mm (0.6") rubber recoil pad in black.
Optima 20 drilling with 1-2 special trigger system
8.186,00 €
Features same action as Optima drilling, without the need for a barrel selector.
Further information on this exceptional version can be found in the Krieghoff
Hunting Gun Catalog.
Optima 20 double rifle drilling
8.152,00 €
Steel receiver; standard barrel length: 55 cm (22"); standard stock length: 37 cm
(14.5"), incl. 15 mm (0.6") rubber recoil pad in black.
Optima 20 double rifle drilling with 1-2 special trigger system
9.425,00 €
Features same action as Optima double rifle drilling, without the need for a barrel
selector. Further information on this exceptional version can be found in the
Krieghoff Hunting Gun Catalog.
Optima 20 “Big Five” double rifle drilling 2
14.054,00 €
Steel receiver; standard barrel length: 60 cm (24"); traditionally soldered; standard
stock length: 38 cm (15"), incl. 15 mm (0.6") rubber recoil pad in black; steel trigger
base plate and heavy stock bolt for weight and balance optimization; open sight
featuring wide V-shape middle sight, ball shaped front bead and “Big Five” stock
contour.
1
2
Except for Optima “Big Five”.
Custom made.
2
Action available in steel or duraluminium; standard barrel length: 60 cm (24");
standard stock length: 37 cm (14.5"), incl. 15 mm (0.6") rubber recoil pad in black.
C A L IB R E S A ND G AU GE S
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this
feature can be found under category “additional equipment”.
Optima 12 and 20 drilling thermo stable
▶
▶
▶
Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser,
8x57IRS, 8x75RS, 9.3x74R
Shotgun calibres: 12/70, 12/76 1, 20/76
Choke: 1/2–3/4
Optima 20 double rifle drilling
▶
▶
▶
Rifle calibres: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS,
9.3x74R
Shotgun calibres: 20/76
Choke: 3/4
Optima 20 “Big Five” double rifle drilling
▶
▶
▶
Rifle calibres: .375 Flanged, .450/.400 N.E., .500/.416 N.E. (3 1/4"), .470 N.E.
Shotgun calibres: 20/76
Choke: 3/4
Optima 12 and 20 drilling traditionally soldered
▶
▶
▶
Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser,
8x57IRS, 8x75RS, 9.3x74R
Shotgun calibres: 12/70, 12/76 1, 20/76
Choke: 1/2–3/4
Custom calibres and gauges
from 1.174,00 €
Further calibres and gauges on request.
A DDI T ION A L EQUIP MEN T
163,00 €
Spring loaded extractor claws, per barrel
For rimless cartridges
117,00 €
Automatic set trigger release, per set trigger
Not in combination with single trigger and Krieghoff 1-2 trigger
Second set trigger installed in the rear trigger
526,00 €
Krieghoff 1-2 trigger
681,00 €
Different barrel length
▶
▶
60 cm (24") for thermostable model Optima drilling
55 cm (22") for traditionally soldered Optima drilling
Single combination trigger featuring set trigger device, non selective
Fixed firing sequence: right barrel – left barrel or bottom barrel – top barrel. Because
of the fixed firing sequence, this feature is not recommended for models with selective barrels, e. g. drillings with insert barrels. Single triggers are generally available
up to calibre .375, but not in combination with the automatic set trigger release.
1
Steel receiver only.
3
526,00 €
526,00 €
526,00 €
OP T IM A
7.206,00 €
Optima 12 and 20 Drilling traditionally soldered
OP T IM A
Cosmetic sideribs for models thermo stable
331,00 €
For optimum and aesthetic reasons, the side rib is best fitted after scope mounting
and sighting-in and we strongly recommend that this process is carried out at the
factory. Not available for Optima 12 featuring 60 cm (24") barrel length.
Krieghoff see through sight
292,00 €
For Optima 12 and 20 drilling thermo stable and Optima 20 double rifle drilling
95,00 €
2-way flip sight
For Optima double rifle drilling. Wide U-shaped middle sight for shotshell and slug
use. Fine U-shaped sight for rifle use.
209,00 €
BreaKO recoil reducer
Fitting included (weight: 350 g/12.3 oz, diameter: 22.5 mm, length: 100 mm)
Folding and express sights
▶
▶
Express sights with two folding leaves for Optima “Big Five” double rifle
drilling
Express sights with two folding leaves for Optima “Big Five” double rifle
drilling; Sighting-in distances and vertical gold lines inlaid into both fixed
and folding leaves.
619,00 €
1.040,00 €
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
▶
▶
Models thermo stable:
One barrel on Optima 12 and 20 thermo stable
Both barrels on Optima 12 and 20 thermo stable
Traditional soldered models:
One barrel on drilling and double rifle drilling model Optima
Both barrels on Optima drilling
158,00 €
368,00 €
313,00 €
626,00 €
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 43.
S COP E MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this
type of gun.
Optima 12 and 20 drilling thermo stable
▶
787,00 €
Pivot bridge mount
Optima 20 double rifle drilling
▶
▶
1.087,00 €
724,00 €
Pivot bridge mount
Tip-off mount for red dot sight
Optima 20 “Big Five” double rifle drilling
▶
1.403,00 €
Pivot bridge mount
Fitting a base plate for Optima “Big Five”
▶
1
no extra charge
For pivot bridge mount
Not available in conjunction with screw-in chokes.
Please pay attention to the instructions about “scope mounts” on page 61.
4
OP T IM A
IN T ERCH A NGE A B L E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood.
Barrel fitting, proof testing and sighting-in are included.
▶
▶
▶
▶
Interchangeable drilling barrel, thermo stable 1
Interchangeable double rifle drilling barrel, traditionally soldered
(only Optima 20)
Interchangeable double rifle drilling barrel “Big Five”, traditionally soldered
(only Optima 20)
Interchangeable drilling barrel, traditionally soldered
3.725,00 €
5.045,00 €
10.936,00 €
4.039,00 €
FL USH FI T T ING BR IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 12 and 20 gauge in the following constrictions:
Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶
▶
▶
▶
▶
▶
▶
Fitting of chokes, per barrel
Briley screw-in choke, suitable for lead or steel shot (12 and 20 gauge)
Choke wrench
“Speed” wrench for quick choke changes (12 and 20 gauge)
Special grease for choke
Container for three chokes
Container for five chokes
137,00 €
93,00 €
34,00 €
116,00 €
29,00 €
20,00 €
21,00 €
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Wood upgrade
▶
▶
▶
▶
328,00 €
784,00 €
1.045,00 €
1.309,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a hand
made stock.
▶ Category C1
▶ Category C2
▶ Category C3
2.971,00 €
3.813,00 €
4.654,00 €
Right-handed stock (hand-crafted)
▶
▶
Standard dimensions
Special dimensions, made to customer’s specifications
712,00 €
1.037,00 €
Left-handed stock (hand-crafted)
Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters.
▶ Standard dimensions
▶ Special dimensions, made to customer’s specifications
1
The gauge of the interchangeable barrel has to be the same as the gauge of the original barrel.
5
712,00 €
1.037,00 €
OP T IM A
Forearm (hand-crafted)
▶
▶
Standard dimensions
Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
Rubber recoil pad
187,00 €
432,00 €
311,00 €
With leather cover; black or brown; 15, 20 or 25 mm; fitting included
Stock magazine with hinged cover plate
1.014,00 €
Ornamental line engraving borders receiver included.
Other engravings upon request.
E XCL USI V E OP T IONS
“Façon Exclusive”
2.936,00 €
The final shape and finish of the action body and furniture is individually created
by the use of hand tools.
Hand-polished stock-finish
918,00 €
Fine checkering instead of standard checkering 1
135,00 €
Skip checkering instead of standard checkering 1
91,00 €
Full carving on grip and forearm 1
3.399,00 €
Full carving with leaf arabesques, English arabesques, enhanced English arabesques
or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 1
3.399,00 €
Checkering with carved border on grip and forearm 1
1.369,00 €
Checkering surrounded by leaf arabesques, English arabesques, enhanced English
arabesques or oak leaves.
Ebony or rosewood endpiece on grip and forearm 1
538,00 €
SUR FACE FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated.
▶
▶
▶
▶
Blued surface finish
Nitrated surface finish
Complete nickel finish of all external parts
“PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
no extra charge
466,00 €
192,00 €
306,00 €
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver
▶
▶
Inletting into pistol grip cap
Steel pistol grip cap 1
1
Only available in conjunction with hand-crafted stock.
117,00 €
393,00 €
6
217,00 €
313,00 €
515,00 €
707,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
Locks
▶
▶
▶
▶
Internal lock parts nickel plated
Internal lock parts gold plated, triggers not included
Trigger gold plated (for guns with only one trigger or single trigger option)
Double triggers gold plated
K R IEGHOFF INSERT B A R R EL “K S”
352,00 €
805,00 €
143,00 €
200,00 €
1
The insert barrel “KS” can be sighted-in without removing it from the carrier barrel as adjustment is
done at the muzzle of the insert barrel. The listed prices include fitting, proof testing and sighting-in.
Drillings featuring light weight receivers, made from Duraluminium can only be equipped with
.22 Hornet and 6x70R calibres and only if the lock up of the gun is in good condition.
The exception here makes our Optima 20 drilling dural which features a specially designed lock up system, which is also suitable for larger calibres such as .222 Rem, 5.6x50R Mag. and 5.6x52R. The Optima
drilling 12/76 (3") and 20/76 (3") in steel version fits all insert barrel calibres up to 9.3x74R.
Gauge 12
▶
▶
.22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6x70R, 6.5x57R,
7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS
.308 Win., .30–06, 9.3x74R
1.430,00 €
1.620,00 €
Gauge 20
▶
▶
▶
.22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6x70R
6.5x57R, 7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS
.308 Win., .30–06, 9.3x74R
price on request
EL 22 and EL 44
1
1.430,00 €
1.506,00 €
1.620,00 €
The Krieghoff Insert Barrel “KS” is not suitable for barrels equipped with Briley chokes.
7
OP T IM A
Monograms
▶
▶
▶
▶
K R IEGHOF F ULT R A
ULT R A
Krieghoff Ultra
Over & under double rifle shown with additional options
Engraving: “Large game scene with oak leaves”
Ultra standard configuration:
▶ Set trigger integrated in the front trigger
▶ Universal Trigger System
▶ Combi-Cocking Device
▶ Steel trigger guard
▶ Front plate for pivot bridge mount
▶ Steel shot proofed depending on choke size and
material of the receiver
▶ Quick detachable sling swivels
▶
▶
▶
▶
▶
▶
Nickel plated receiver finish
Ornamental line engraving borders receiver
Hinge screws, top latch, screws and pins
are blued
Standard wood
Right-handed stock with Bavarian-style
cheekpiece and “Schnabel” forearm
Supplied in Krieghoff GunPack
Ultra 20 over & under rifle/shotgun combination thermo stable
4.360,00 €
Action available in steel or duraluminium; standard barrel length: 55 cm (22");
standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black.
Ultra 20 over & under double rifle thermo stable
5.064,00 €
Steel receiver; standard barrel length: 60 cm (24"), or 55 cm (22") optionally;
standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black.
Ultra 20 “Bergstutzen” thermo stable 1
6.220,00 €
Steel receiver; standard barrel length: 60 cm (24"), or 55 cm (22") optionally;
standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black.
Ultra 20 over & under rifle/shotgun combination traditionally soldered
4.657,00 €
Action available in steel or duraluminium; standard barrel length: 63.5 cm (25") or
60 cm (24") optionally; standard stock length: 37 cm (14.5") incl. 15 mm (0.6")
rubber recoil pad in black.
C A L IB R E S A ND G AU GE S
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this
feature can be found under category “additional equipment”.
Ultra 20 over & under rifle/shotgun combination thermo stable
▶
▶
1
Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser,
8x57IRS, 8x75RS, 9.3x74R
Shotgun calibres: 20/76
Available on request.
8
Ultra 20 over & under double rifle thermo stable
▶
▶
Same calibres in both barrels.
Rifle calibres: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS,
9.3x74R
▶
ULT R A
Ultra 20 “Bergstutzen” thermo stable
▶
Rifle calibre bottom barrel: .22 Ho., .222 Rem., .243 Win., 5.6x50R Mag,
5.6x52R, 6.5x57R, 6.5x65R
Rifle calibre top barrel: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS,
8x75RS, 9.3x74R
Ultra 20 over & under rifle/shotgun combination traditionally soldered
▶
▶
Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser,
8x57IRS, 8x75RS, 9.3x74R
Shotgun calibres: 20/76
Custom calibres and gauges
from 1.174,00 €
Further calibres and gauges on request.
A DDI T ION A L EQUIP MEN T
163,00 €
Spring loaded extractor claws, per barrel
For rimless cartridges
117,00 €
Automatic set trigger release, per set trigger
Not in combination with single trigger and Krieghoff 1-2 trigger
Second set trigger installed in the rear trigger
526,00 €
Krieghoff 1-2 trigger
681,00 €
Different barrel length
▶
▶
55 cm (22") for thermostable model Ultra over & under double rifle and
“Bergstutzen”
60 cm (24") for thermostable model Ultra over & under rifle/shotgun
combination
Single combination trigger featuring set trigger device, non selective
no extra charge
526,00 €
526,00 €
Fixed firing sequence: bottom barrel – top barrel. Because of the fixed firing sequence, this feature is not recommended for models with selective barrels, e. g.
over & under rifles and “Bergstutzen”. Not available in combination with the
automatic set trigger release.
292,00 €
Krieghoff see through sight
For Ultra 20 over & under double rifle thermo stable
95,00 €
2-way flip sight
For Ultra over & under rifle/shotgun combination. Wide U-shaped middle sight for
shotshell and slug use. Fine U-shaped sight for rifle use.
331,00 €
Cosmetic sideribs for models thermo stable
For optimum and aesthetic reasons, the side rib is best fitted after scope mounting
and sighting-in and we strongly recommend that this process is carried out at the
factory.
209,00 €
BreaKO recoil reducer
Fitting included (weight: 350 g/12.3 oz, diameter: 22.5 mm, length: 100 mm)
9
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
▶
▶
Models thermo stable:
One barrel on Ultra 20 over & under rifle/shotgun combination
Traditional soldered models:
One barrel on Ultra 20 over & under rifle/shotgun combination
158,00 €
313,00 €
ULT R A
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 43.
S COP E MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this
type of gun.
Ultra 20 over & under rifle/shotgun combination thermo stable and
over & under rifle/shotgun combination traditionally soldered
▶
787,00 €
Pivot bridge mount
Ultra 20 over & under double rifle thermo stable
▶
▶
▶
931,00 €
1.063,00 €
724,00 €
Pivot bridge mount
Pivot bridge ring mount for driven hunt scopes 2
Tip-off mount for red dot sight
Ultra 20 “Bergstutzen” thermo stable
▶
931,00 €
Pivot bridge mount
IN T ERCH A NGE A B L E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood.
Barrel fitting, proof testing and sighting-in are included.
▶
▶
▶
▶
Interchangeable over & under rifle/shotgun combination barrel, thermo stable
Interchangeable over & under double rifle, thermo stable
Interchangeable “Bergstutzen” barrel, thermo stable
Interchangeable over & under rifle/shotgun combination barrel, traditionally
soldered
2.085,00 €
2.887,00 €
4.212,00 €
2.424,00 €
FL USH FI T T ING BR IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 20 gauge in the following constrictions:
Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶
▶
▶
▶
▶
▶
▶
1
2
137,00 €
93,00 €
34,00 €
116,00 €
29,00 €
20,00 €
21,00 €
Fitting of chokes, per barrel
Briley screw-in choke, suitable for lead or steel shot
Choke wrench
“Speed” wrench for quick choke changes
Special grease for choke
Container for three chokes
Container for five chokes
Please pay attention to the instructions about “scope mounts” on page 61.
Designated “driven hunt scopes” are scopes on which the objective diameter is the same as the middle tube diameter.
This kind of scopes can be mounted with the same distance in between the two mount bases as the regular pivot rail mount.
10
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Wood upgrade
▶
▶
▶
▶
328,00 €
784,00 €
1.045,00 €
1.309,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a hand
made stock.
▶ Category C1
▶ Category C2
▶ Category C3
2.971,00 €
3.813,00 €
4.654,00 €
Right-handed stock (hand-crafted)
▶
▶
Standard dimensions
Special dimensions, made to customer’s specifications
712,00 €
1.037,00 €
Left-handed stock (hand-crafted)
Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters.
▶ Standard dimensions
▶ Special dimensions, made to customer’s specifications
712,00 €
1.037,00 €
Forearm (hand-crafted)
▶
▶
Standard dimensions
Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
187,00 €
432,00 €
311,00 €
Rubber recoil pad
With leather cover; black or brown; 15, 20 or 25 mm; fitting included
1.014,00 €
Stock magazine with hinged cover plate
Ornamental line engraving borders receiver included.
Other engravings upon request.
E XCL USI V E OP T IONS
2.936,00 €
“Façon Exclusive”
The final shape and finish of the action body and furniture is individually created
by the use of hand tools.
Hand-polished stock-finish
918,00 €
Fine checkering instead of standard checkering 1
135,00 €
Skip checkering instead of standard checkering 1
91,00 €
Full carving on grip and forearm 1
3.399,00 €
Full carving with leaf arabesques, English arabesques, enhanced English arabesques
or oak leaves.
1
Only available in conjunction with hand-crafted stock.
11
ULT R A
S T OCK S & W OOD W OR K
Fish scale checkering instead of standard checkering on grip and forearm 1
3.399,00 €
Checkering with carved border on grip and forearm 1
1.369,00 €
Checkering surrounded by leaf arabesques, English arabesques, enhanced English
arabesques or oak leaves.
ULT R A
Ebony or rosewood endpiece on grip and forearm 1
538,00 €
SUR FACE FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or
nitrated.
▶
▶
▶
▶
Blued surface finish
Nitrated surface finish
Complete nickel finish of all external parts
“PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
no extra charge
466,00 €
192,00 €
306,00 €
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver
▶
▶
117,00 €
393,00 €
Inletting into pistol grip cap
Steel pistol grip cap 1
Monograms
▶
▶
▶
▶
217,00 €
313,00 €
515,00 €
707,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
Locks
▶
▶
▶
▶
Internal lock parts nickel plated
Internal lock parts gold plated, triggers not included
Trigger gold plated (for guns with only one trigger or single trigger option)
Double triggers gold plated
K R IEGHOFF INSERT B A R R EL “K S”
352,00 €
805,00 €
143,00 €
200,00 €
2
The insert barrel “KS” can be sighted-in, without deinstalling it from the carrier barrel. All adjustment is
done at the muzzle of the insert barrel. The listed prices already include fitting, state certified proof and
sighting-in. Over & under rifle/shotgun combination featuring light weight receivers, made from Duraluminium can only be equipped with 6x70R calibres and only, if the lock up of the gun is in good condition.
Gauge 20
▶
▶
▶
.22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6x70R
6.5x57R, 7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS
.308 Win., .30–06, 9.3x74R
price on request
EL 22 and EL 44
1
2
1.430,00 €
1.506,00 €
1.620,00 €
Only available in conjunction with hand-crafted stock.
The Krieghoff Insert Barrel “KS” is not suitable for barrels equipped with Briley chokes.
12
K R IEGHOF F CL A SSIC
SSIC CL A SSIC
Krieghoff Classic
Double Rifle “Big Five” shown with additional options
and custom engraving
Classic standard configuration:
▶ Set trigger integrated in the front trigger 1
▶ Steel receiver
▶ Universal Trigger System
▶ Combi-Cocking Device
▶ Steel trigger plate and Steel trigger guard
▶ Front plate for pivot bridge mount 1
▶ Quick detachable sling swivels
▶ Nickel plated receiver finish
▶
▶
▶
▶
▶
Ornamental line engraving borders receiver
Hinge screws, top latch, screws and pins
are blued
Standard wood
Right-handed stock with Bavarian-style
cheekpiece 1 and “Schnabel” forearm
Supplied in Krieghoff GunPack
Classic double rifle
6.381,00 €
Standard barrel length: 60 cm (24"); standard stock length: 37 cm (14.5") incl.
15 mm (0.6") rubber recoil pad in black.
Classic “Big Five” double rifle
8.820,00 €
Standard barrel length: 60 cm (24"); standard stock length: 38 cm (15"); articulated
front trigger without set trigger device; special weighted stock-bolt for optimum
weight and balance; V-Shaped rear sight with bead front sight; right-handed “Big
Five” stock incl. “Old English” rubber recoil pad in black.
Classic side-by-side shotgun
6.292,00 €
Standard barrel length: 71 cm (28"); standard stock length: 37 cm (14.5") incl.
15 mm (0.6") rubber recoil pad in black; Steel shot proofed depending on choke size.
Classic side-by-side rifle/shotgun combination 2
8.365,00 €
Standard barrel length: 60 cm (24"); standard stock length: 37 cm (14.5") incl.
15 mm (0.6") rubber recoil pad in black. Steel shot proofed depending on choke size
C A L IB R E S A ND G AU GE S
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this
feature can be found under category “additional equipment”.
Classic Double rifle
▶
1
2
Rifle calibres: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS,
9.3x74R
Except for Classic “Big Five”.
Custom made.
13
Classic “Big Five” double rifle
▶
Rifle calibres: .375 Flanged Mag. N.E., .375 H&H Mag., .450/.400 N.E.,
.500/.416 N.E. (3 ¼"), .470 N.E., .500 N.E. (3")
Classic side-by-side shotgun
▶
Shotgun calibres: 20/76
Classic side-by-side rifle/shotgun combination
▶
▶
Shotgun calibres: 20/76
Rifle calibres: on request
CL A SSIC
Custom calibres and gauges
from 1.174,00 €
Further calibres and gauges on request.
A DDI T ION A L EQUIP MEN T
1.570,00 €
Intelligent Ejector System (IES)
Fitting only possible for new guns.
163,00 €
Spring loaded extractor claws, per barrel
For rimless cartridges
117,00 €
Automatic set trigger release, per set trigger
Not in combination with single trigger and Krieghoff 1-2 trigger
Second set trigger installed in the rear trigger
526,00 €
Krieghoff 1-2 trigger
681,00 €
Different barrel length
▶
55 cm (22") for Classic double rifle (barrel length not available for Classic
“Big Five” double rifle)
Single combination trigger featuring set trigger device, non selective
526,00 €
526,00 €
Fixed firing sequence: right barrel – left barrel. Because of the fixed firing sequence,
this feature is not recommended for models with selective barrels, e. g. side-by-side
rifle/shotgun combination. Single triggers are generally available up to calibre .375,
but not in combination with the automatic set trigger release.
292,00 €
Krieghoff see through sight
For Classic double rifle and Classic “Big Five” double rifle
Folding and express sights
▶
▶
Express sights with two folding leaves for Classic “Big Five” double rifle
Express sights with two folding leaves for Classic “Big Five” double rifle;
Sighting-in distances and vertical gold lines inlaid into both fixed and
folding leaves.
619,00 €
1.040,00 €
209,00 €
BreaKO recoil reducer
Fitting included (weight: 350 g/12.3 oz, diameter: 22.5 mm, length: 100 mm)
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
▶
1
Traditional soldered models:
One barrel on Classic side-by-side shotgun or rifle/shotgun combination
Both barrels on Classic side-by-side shotgun
Please pay attention to the instructions about “scope mounts” on page 61.
14
158,00 €
368,00 €
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 43.
S COP E MOUN T S
Classic Double rifle
▶
▶
▶
1.087,00 €
1.223,00 €
724,00 €
Pivot bridge mount
Pivot bridge ring mount for driven hunt scopes 1
Tip-off mount for red dot sight
Classic “Big Five” double rifle
▶
▶
1.403,00 €
1.540,00 €
Pivot bridge mount
Pivot bridge ring mount for driven hunt scopes 1
Fitting a base plate for pivot bridge mount
▶
▶
For Classic side-by-side double rifle
For Classic side-by-side shotgun and “Big Five” side-by-side double rifle
no extra charge
225,00 €
IN T ERCH A NGE A B L E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood.
Barrel fitting, proof testing and sighting-in are included.
▶
▶
▶
▶
▶
Interchangeable double rifle barrel
Interchangeable “Big Five” double rifle barrel
Interchangeable side-by-side shotgun barrel (gauge 20/76 only)
Interchangeable side-by-side rifle/shotgun combination barrel
(gauge 20/76 only)
Additional charge for interchangeable barrel with ejectors 2
3.684,00 €
5.822,00 €
3.593,00 €
5.668,00 €
556,00 €
FL USH FI T T ING BR IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 20 gauge in the following constrictions:
Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶
▶
▶
▶
▶
▶
▶
1
2
137,00 €
93,00 €
34,00 €
116,00 €
29,00 €
20,00 €
21,00 €
Fitting of chokes, per barrel
Briley screw-in choke, suitable for lead or steel shot
Choke wrench
“Speed” wrench for quick choke changes
Special grease for choke
Container for three chokes
Container for five chokes
Designated “driven hunt scopes” are scopes on which the objective diameter is the same as the middle tube diameter.
This kind of scopes can be mounted with the same distance in between the two mount bases as the regular pivot rail mount.
Only in conjunction with an prepared receiver for ejectors.
15
CL A SSIC
All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this
type of gun.
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Wood upgrade
▶
▶
▶
▶
328,00 €
784,00 €
1.045,00 €
1.309,00 €
Category 001
Category 002
Category 003
Category 004
CL A SSIC
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a hand
made stock.
▶ Category C1
▶ Category C2
▶ Category C3
2.971,00 €
3.813,00 €
4.654,00 €
Right-handed stock (hand-crafted)
▶
▶
Standard dimensions
Special dimensions, made to customer’s specifications
712,00 €
1.037,00 €
Left-handed stock (hand-crafted)
Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters.
▶ Standard dimensions
▶ Special dimensions, made to customer’s specifications
712,00 €
1.037,00 €
Forearm (hand-crafted)
▶
▶
Standard dimensions
Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
187,00 €
432,00 €
311,00 €
Rubber recoil pad
With leather cover; black or brown; 15, 20 or 25 mm; fitting included
1.014,00 €
Stock magazine with hinged cover plate
Ornamental line engraving borders receiver included.
Other engravings upon request.
E XCL USI V E OP T IONS
2.936,00 €
“Façon Exclusive”
The final shape and finish of the action body and furniture is individually created
by the use of hand tools.
2.230,00 €
“Imperial design”
Extended top tang, extended steel trigger guard, steel pistol grip cap, engraved serial
number into the trigger guard extension and Rigby-style cheekpiece.
Hand-polished stock-finish
918,00 €
Fine checkering instead of standard checkering 1
135,00 €
Skip checkering instead of standard checkering 1
91,00 €
1
Only available in conjunction with hand-crafted stock.
16
Full carving on grip and forearm 1
3.399,00 €
Full carving with leaf arabesques, English arabesques, enhanced English arabesques
or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 1
3.399,00 €
Checkering with carved border on grip and forearm 1
1.369,00 €
Checkering surrounded by leaf arabesques, English arabesques, enhanced English
arabesques or oak leaves.
Ebony or rosewood endpiece on grip and forearm 1
CL A SSIC
538,00 €
SUR FACE FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or
nitrated.
▶
▶
▶
▶
Blued surface finish
Nitrated surface finish
Complete nickel finish of all external parts
“PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
no extra charge
466,00 €
192,00 €
306,00 €
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver
▶
▶
Inletting into pistol grip cap
Steel pistol grip cap 1
▶
Monograms
▶
▶
▶
▶
117,00 €
393,00 €
217,00 €
313,00 €
515,00 €
707,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
Locks
▶
▶
▶
▶
Internal lock parts nickel plated
Internal lock parts gold plated, triggers not included
Trigger gold plated (for guns with only one trigger or single trigger option)
Double triggers gold plated
1
Only available in conjunction with hand-crafted stock.
17
352,00 €
805,00 €
143,00 €
200,00 €
K R IEGHOF F HUB ER T US
Krieghoff Hubertus
Single shot rifle shown with additional options
Engraving: “Fine English with roses & bouquet”
HUBERT US
Hubertus standard configuration:
▶ Set trigger integrated in the front trigger
▶ Universal Trigger System
▶ Combi-Cocking Device
▶ Steel trigger guard
▶ Front plate for pivot bridge mount
▶ Quick detachable sling swivels
▶ Nickel plated receiver finish
▶
▶
▶
▶
▶
Ornamental line engraving borders receiver
Hinge screws, top latch, screws and pins
are blued
Standard wood
Right-handed stock with Bavarian-style
cheekpiece and “Schnabel” forearm
Supplied in Krieghoff GunPack
Hubertus single shot rifle
Standard barrel length: 60 cm (24") or 55 cm (22") optionally; standard stock length:
37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black.
▶ Standard calibre
Action available in steel or duraluminium.
▶ Magnum calibre
Action available in steel only.
4.086,00 €
5.511,00 €
5.064,00 €
Hubertus single shot rifle with octagonal barrel
Action available in steel or duraluminium; sling swivel base is milled directly onto
the barrel.
C A L IB R E S A ND G AU GE S
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this
feature can be found under category “additional equipment”.
Hubertus single shot rifle
▶
▶
Standard calibre:
.222 Rem., .22–250 Rem., 5.6x50R Mag., 5.6x52R, .243 Win.1,
6x62R Frères 1, .270 Win., 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win.1, .30–06 1,
.30R Blaser 1, 8x57IRS, 8x75RS, 9.3x74R
Magnum calibre: 1
7mm Rem. Mag., 300 Win. Mag.
Hubertus single shot rifle with octagonal barrel
▶
6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win.1, .30–06 1, .30R Blaser 1
from 1.174,00 €
Custom calibres and gauges
Further calibres and gauges on request.
1
For those calibres only steel action available.
18
A DDI T ION A L EQUIP MEN T
Spring loaded extractor claws, per barrel
163,00 €
For rimless cartridges
Automatic set trigger release
117,00 €
Different barrel length
▶
no extra charge
55 cm (22") for Krieghoff Hubertus single shot rifle
Krieghoff see through sight
292,00 €
BreaKO recoil reducer
209,00 €
Fitting included (weight: 350 g/12.3 oz, diameter: 22.5 mm, length: 100 mm)
HUBERT US
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 43.
S COP E MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are prepared
for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this type of gun.
▶
742,00 €
Pivot bridge mount
IN T ERCH A NGE A B L E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood.
Barrel fitting, proof testing and sighting-in are included.
▶
▶
▶
▶
Interchangeable barrel in standard calibre
Interchangeable barrel in magnum calibre (steel action only)
Interchangeable octagonal barrel in standard calibre
Interchangeable shotgun barrel gauge 28/76
1.905,00 €
3.330,00 €
2.887,00 €
1.905,00 €
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Wood upgrade
▶
▶
▶
▶
328,00 €
784,00 €
1.045,00 €
1.309,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a hand
made stock.
▶ Category C1
▶ Category C2
▶ Category C3
19
2.971,00 €
3.813,00 €
4.654,00 €
Right-handed stock (hand-crafted)
▶
▶
Standard dimensions
Special dimensions, made to customer’s specifications
712,00 €
1.037,00 €
Left-handed stock (hand-crafted)
Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters.
▶ Standard dimensions
▶ Special dimensions, made to customer’s specifications
712,00 €
1.037,00 €
Forearm (hand-crafted)
▶
▶
187,00 €
432,00 €
Standard dimensions
Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
311,00 €
Rubber recoil pad
With leather cover; black or brown; 15, 20 or 25 mm; fitting included
1.014,00 €
Stock magazine with hinged cover plate
HUBERT US
Ornamental line engraving borders receiver included.
Other engravings upon request.
E XCL USI V E OP T IONS
2.936,00 €
“Façon Exclusive”
The final shape and finish of the action body and furniture is individually created
by the use of hand tools.
Hand-polished stock-finish
918,00 €
Fine checkering instead of standard checkering 1
135,00 €
Skip checkering instead of standard checkering 1
91,00 €
Full carving on grip and forearm 1
3.399,00 €
Full carving with leaf arabesques, English arabesques, enhanced English arabesques
or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 1
3.399,00 €
Checkering with carved border on grip and forearm 1
1.369,00 €
Checkering surrounded by leaf arabesques, English arabesques, enhanced English
arabesques or oak leaves.
Ebony or rosewood endpiece on grip and forearm 1
538,00 €
SUR FACE FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or
nitrated.
▶
▶
▶
▶
Blued surface finish
Nitrated surface finish
Complete nickel finish of all external parts
“PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
1
Only available in conjunction with hand-crafted stock.
20
no extra charge
466,00 €
192,00 €
306,00 €
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver
▶
▶
117,00 €
393,00 €
Inletting into pistol grip cap
Steel pistol grip cap 1
Monograms
▶
▶
▶
▶
217,00 €
313,00 €
515,00 €
707,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
Internal lock parts nickel plated
Internal lock parts gold plated, triggers not included
Trigger gold plated
1
Only available in conjunction with hand-crafted stock.
352,00 €
805,00 €
143,00 €
21
HUBERT US
Locks
▶
▶
▶
K R IEGHOF F SEMP R IO
Semprio standard configuration:
▶ Krieghoff In-Line action
▶ Set trigger integrated
▶ Universal Trigger System
▶ Combi-Cocking Device
▶ “Click-and-Go” sling swivels
▶ Take down
▶
▶
▶
▶
Prepared for pivot bridge mount
(Krieghoff Pro Mount)
Black anodized action finish
Standard wood in oil finish
Supplied in Semprio GunPack
SEMPR IO
Krieghoff Semprio
In-Line repeater
Models: black anodized finish
Camouflage stock finish “Blaze Orange” (Fig. above)
Thumb hole stock with Camouflage stock finish “Forest Green” (Fig. below)
Semprio In-Line repeater in standard calibres
3.169,00 €
Standard barrel length: 55 cm (22"); magazine capacity: 4+1; standard stock length
37 cm (14.5"), incl. 15 mm (0.6") black rubber recoil pad in black; right-handed stock
with Semprio cheekpiece; Krieghoff see through sight with fluorescent beads.
Semprio In-Line repeater in magnum calibres
3.423,00 €
Standard barrel length: 63 cm (25"); magazine capacity: 3+1; standard stock length
37 cm (14.5") incl. 15 mm (0.6") black rubber recoil pad in black; right-handed stock
with Semprio cheekpiece; Krieghoff see through sight with fluorescent beads.
Krieghoff Semprio “Big Five”
In-Line repeater shown with additional options
Model: black anodized finish
Semprio “Big Five” In-Line Repeater
5.697,00 €
Standard barrel length: 55 cm (22"); magazine capacity: 3+1; standard stock length
37 cm (14.5") incl. traditional rubber recoil pad in red; “Big Five” stock with
German style Safari cheek piece; “PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver); express sight with two folding blades; full banded Safari
contour barrel provides stable base for brass bead front sight and front sling swivel;
Holland & Holland folding sight.
22
C A L IB R E S A ND G AU GE S
Semprio In-Line repeater in standard calibres
▶
Rifle calibres: .223 Rem., .243 Win., 6.5x55 SE, .270 Win., 7x64, .308 Win.,
.30–06, 8x57IS, 9.3x62
Semprio In-Line repeater in magnum calibres
▶
Rifle calibres: 7mm Rem. Mag., .300 Win. Mag., .375 Ruger 1
Semprio “Big Five” In-Line repeater 2
▶
Rifle calibres: .458 Win. Mag.
Custom calibres and gauges
from 1.174,00 €
Further calibres and gauges on request.
A DDI T ION A L EQUIP MEN T
Semprio In-Line Repeater
▶
▶
▶
▶
▶
Nickel plated action frame
“Compact” version with additional sling swivels on the side of forend and
buttstock
BreaKO recoil reducer
Barrel porting (recoil and muzzle jump is reduced up to 35 %)
Muzzle threading, depends on calibre (M14x1 or M15x1) 3
“PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
Fluted barrel – improves the temperature management of the barrel,
incl. “PH-ProCoating”
no extra charge
471,00 €
209,00 €
381,00 €
279,00 €
306,00 €
962,00 €
Semprio “Big Five” In-Line Repeater
▶
▶
no extra charge
209,00 €
Nickel plated action frame
BreaKO recoil reducer
“A IMZONIC ” SIL ENCER
Due to significant reduction in muzzle noise by up to 26 dB, the noise hazard is significantly reduced for
the hunter, thereby also reducing the sound and the noise pollution in the vicinity
Front mounted models
▶
“aimZonic” Compact
Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.3 mm
Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1
328,00 €
▶
“aimZonic” Predator
Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.5 mm
Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1
360,00 €
Over barrel models
▶
1
2
3
“aimZonic” Cyclone Compact
Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.3 mm
Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1,
M18x1
Only available in standard barrel length 55 cm (22").
.375 Ruger and .416 Ruger on request.
Please find the extra charge for the thread cover bushing on page 24.
23
404,00 €
SEMPR IO
▶
▶
▶
“aimZonic” Cyclone Predator
Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.5 mm
Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1,
M18x1
▶
“aimZonic” Triton 42
Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.5 mm
Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1
404,00 €
▶
“aimZonic” Triton 50
Max. calibre: 5.7 mm, 6.7 mm, 7.7 mm, 8.6 mm, 9.5 mm
Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1
437,00 €
437,00 €
Additional equipment
▶
▶
“aimZonic” thread cover bushing
Threading: ½"x20 UNF, ½"x28 UNEF, M13x1, M14x1, M15x1, M18x1
Krieghoff thread cover bushing
Individual fitted to the outer contour of the barrel
Threading: M14x1, M15x1
33,00 €
111,00 €
SEMPR IO
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 43.
S COP E MOUN T S
Fitting and sighting-in is already included.
Krieghoff Semprio ProMount
▶
▶
▶
642,00 €
688,00 €
724,00 €
Tip-off mounts for scopes with rail
Tip-off mounts for scopes without rail (ring mount)
Tip-off mounts for red dot sight
IN T ERC H A NGE A B L E B A R R EL S & ACCESSOR IE S
Interchangeable barrels
As a complete assembly, including wood forearm, magazine frame, but without
magazine and bolt head.
▶ Interchangeable barrel for standard calibre
▶ Interchangeable barrel for magnum calibre
1.386,00 €
1.638,00 €
Extra magazines
▶
▶
▶
▶
▶
1
Calibre group 1: .270 Win., .30–06, 7x64, 8x57JS, 6.5x55 SE
Calibre group 2: .308 Win., .243 Win.
Calibre group 3: 9.3x62
Calibre group 4: .300 Win. Mag., 7mm Rem. Mag., .375 Ruger,
.416 Ruger 1, .458 Win. Mag.
Calibre group 5: .223 Rem.
Only available for the US market.
24
86,00 €
86,00 €
86,00 €
86,00 €
86,00 €
Bolt heads
▶
▶
▶
196,00 €
196,00 €
196,00 €
Standard calibre, for calibre groups 1, 2 and 3
Magnum calibre, for calibre group 4
Small calibre, for calibre group 5
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Stock
Oil finish; straight comb; stock length 37 cm (14.5") which already includes the
standard 15 mm (0.6") black rubber recoil pad. Standard wood grade or T-Wood
optionally, alternative camouflage finish in “Blaze Orange” or “Forest Green”.
▶ Stock without cheekpiece
▶ Right-handed stock with Semprio cheekpiece
▶ Left-handed stock with Semprio cheekpiece
no extra charge
no extra charge
228,00 €
Thumb hole stock 1
456,00 €
456,00 €
Manual made stocks
▶
▶
1.037,00 €
432,00 €
Stock hand-crafted
Forearm hand-crafted
Alternative stock finish 1
▶
▶
T-Wood (walnut wood optically improved) 3
Camouflage finish in “Blaze Orange” or “Forest Green”
no extra charge
no extra charge
Wood upgrade
▶
▶
▶
▶
328,00 €
784,00 €
1.045,00 €
1.309,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks 4
Due to the high cost of raw materials, wood grades higher than 004 require a hand
made stock.
▶ Category C1
▶ Category C2
▶ Category C3
2.971,00 €
3.813,00 €
4.654,00 €
Monogram plate, finished the same as the receiver
▶
▶
1
2
3
4
117,00 €
393,00 €
Inletting into pistol grip cap
Steel pistol grip cap 4
Except for Semprio “Big Five”.
Only wood category 001 available – other categories on request.
Not available for hand-crafted stock.
Only available in conjunction with hand-crafted stock.
25
SEMPR IO
Oil finish; straight comb; stock length 37 cm (14.5") which already includes the
standard 15 mm (0.6") black rubber recoil pad; wood category 001 2; alternative
camouflage finish in “Blaze Orange” or “Forest Green”.
▶ Thumb hole stock with Semprio cheekpiece, right-handed
▶ Thumb hole stock with Semprio cheekpiece, left-handed
K R IEGHOF F T RUMP F
Krieghoff Trumpf
Double rifle drilling shown with additional options
and Ornamental line engraving borders receiver
Trumpf standard configuration:
▶ Classic three lock drilling
▶ Separate manual cocking device for rifle barrel
▶ Set trigger integrated in the front trigger
▶ Universal Trigger System
▶ Steel trigger guard
▶ Front plate for pivot bridge mount
▶ Steel shot proofed depending on choke size and
material of the receiver
▶ Quick detachable sling swivels
▶
▶
▶
▶
▶
▶
Nickel plated receiver finish
Ornamental line engraving borders receiver
Hinge screws, top latch, screws and pins
are blued
Standard wood
Right-handed stock with Bavarian-style
cheekpiece and “Schnabel” forearm
Supplied in Krieghoff GunPack
Trumpf 12 and 20 drilling thermo stable
7.897,00 €
Action available in steel or duraluminium; standard barrel length: 55 cm (22");
standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black.
T RUMPF
Trumpf 20 double rifle drilling
9.139,00 €
Steel receiver; standard barrel length: 55 cm (22"); standard stock length:
37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black.
Trumpf 12 and 20 drilling traditionally soldered
8.194,00 €
Action available in steel or duraluminium; standard barrel length: 60 cm (24");
standard stock length: 37 cm (14.5") incl. 15 mm (0.6") rubber recoil pad in black.
C A L IB R E S A ND G AU GE S
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this
feature can be found under category “additional equipment”.
Trumpf 12 and 20 drilling thermo stable and drilling traditionally soldered
▶
▶
▶
Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser,
8x57IRS, 8x75RS, 9.3x74R
Shotgun calibres: 12/70, 12/76 (steel action only), 20/76
Choke: 1/2–3/4
Trumpf 20 double rifle drilling
▶
▶
▶
Rifle calibres: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS,
9.3x74R
Shotgun calibres: 20/76
Choke: 3/4
Custom calibres and gauges
1.174,00 €
Further calibres and gauges on request.
26
A DDI T ION A L EQUIP MEN T
Spring loaded extractor claws, per barrel
163,00 €
For rimless cartridges
Second set trigger installed in the rear trigger
526,00 €
Different barrel length
▶
▶
60 cm (24") for thermo stable model Trumpf drilling
55 cm (22") for traditionally soldered model Trumpf drilling
Cosmetic sideribs for models thermo stable
526,00 €
526,00 €
331,00 €
The cosmetic siderib (available in different heights) is generally fitted after the rifle
is sighted-in. For aesthetic, optical reasons, we strongly recommend that the scope
mounting and sighting-in process is carried out at the factory. Not available for
Trumpf 12 featuring 60 cm (24") barrel length.
292,00 €
Krieghoff see through sight
For Trumpf double rifle drilling
95,00 €
2-way flip sight
For Trumpf drilling. Wide U-shaped middle sight for shotshell and slug use.
Fine U-shaped sight for rifle use.
209,00 €
BreaKO recoil reducer
Fitting included (weight: 350 g/12.3 oz, diameter: 22.5 mm, length: 100 mm)
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
▶
Models thermo stable:
One barrel on Trumpf 12 and 20 thermo stable
Both barrels on Trumpf 12 and 20 thermo stable
Traditional soldered models:
One barrel on Trumpf drilling, double rifle drilling
Both barrels on Trumpf drilling
158,00 €
368,00 €
313,00 €
626,00 €
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 43.
S COP E MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this
type of gun.
Trumpf 12 and 20 drilling thermo stable
▶
787,00 €
Pivot bridge mount
Trumpf 20 double rifle drilling
▶
▶
Pivot bridge mount
Tip-off mount for red dot sight
1
Please pay attention to the instructions about “scope mounts” on page 61.
1.087,00 €
724,00 €
27
T RUMPF
▶
IN T ERCH A NGE A B L E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood.
Barrel fitting, proof testing and sighting-in are included.
▶
▶
▶
Interchangeable drilling barrel, thermo stable 1
Interchangeable double rifle barrel, traditionally soldered
(only Trumpf 20)
Interchangeable drilling barrel, traditionally soldered
3.725,00 €
5.045,00 €
4.039,00 €
FL USH FI T T ING BR IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 12 and 20 gauge in the following constrictions:
Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶
▶
▶
▶
▶
▶
▶
137,00 €
93,00 €
34,00 €
116,00 €
29,00 €
20,00 €
21,00 €
Fitting of chokes, per barrel
Briley screw-in choke, suitable for lead or steel shot
Choke wrench
“Speed” wrench for quick choke changes
Special grease for choke
Container for three chokes
Container for five chokes
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
T RUMPF
Wood upgrade
▶
▶
▶
▶
328,00 €
784,00 €
1.045,00 €
1.309,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a hand
made stock.
▶ Category C1
▶ Category C2
▶ Category C3
2.971,00 €
3.813,00 €
4.654,00 €
Right-handed stock (hand-crafted)
▶
▶
Standard dimensions
Special dimensions, made to customer’s specifications
712,00 €
1.037,00 €
Left-handed stock (hand-crafted)
Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters.
▶ Standard dimensions
▶ Special dimensions, made to customer’s specifications
1
The gauge of the interchangeable barrel has to be the same as the gauge of the original barrel.
28
712,00 €
1.037,00 €
Forearm (hand-crafted)
▶
▶
187,00 €
432,00 €
Standard dimensions
Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
Rubber recoil pad
311,00 €
With leather cover; black or brown; 15, 20 or 25 mm; fitting included
Stock magazine with hinged cover plate
1.014,00 €
Ornamental line engraving borders receiver included.
Other engravings upon request.
E XCL USI V E OP T IONS
“Façon Exclusive”
2.936,00 €
The final shape and finish of the action body and furniture is individually created
by the use of hand tools.
Hand-polished stock-finish
918,00 €
Fine checkering instead of standard checkering 1
135,00 €
Skip checkering instead of standard checkering 1
91,00 €
Full carving on grip and forearm 1
3.399,00 €
Fish scale checkering instead of standard checkering on grip and forearm 1
3.399,00 €
Checkering with carved border on grip and forearm 1
1.369,00 €
Checkering surrounded by leaf arabesques, English arabesques, enhanced English
arabesques or oak leaves.
Ebony or rosewood endpiece on grip and forearm 1
538,00 €
SUR FACE FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or
nitrated.
▶
▶
▶
▶
Blued surface finish
Nitrated surface finish
Complete nickel finish of all external parts
“PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
no extra charge
466,00 €
192,00 €
306,00 €
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver
▶
▶
Inletting into pistol grip cap
Steel pistol grip cap 1
1
Only available in conjunction with hand-crafted stock.
117,00 €
393,00 €
29
T RUMPF
Full carving with leaf arabesques, English arabesques, enhanced English arabesques
or oak leaves.
Monograms
▶
▶
▶
▶
217,00 €
313,00 €
515,00 €
707,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
Locks
▶
▶
▶
▶
352,00 €
805,00 €
143,00 €
200,00 €
Internal lock parts nickel plated
Internal lock parts gold plated, triggers not included
Trigger gold plated (for guns with only one trigger)
Double triggers gold plated
K R IEGHOFF INSERT B A R R EL “K S”
1
The insert barrel “KS” can be sighted-in without removing it from the carrier barrel as adjustment is
done at the muzzle of the insert barrel. The listed prices include fitting, proof testing and sighting-in.
Drillings featuring light weight receivers, made from Duraluminium can only be equipped with
.22 Hornet and 6x70R calibres and only if the lock up of the gun is in good condition.
Gauge 12
▶
▶
.22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6x70R, 6.5x57R, 7x57R,
7x65R, .30R Blaser, 8x57IRS, 8x75RS
.308 Win., .30–06, 9.3x74R
1.430,00 €
1.620,00 €
Gauge 20
▶
▶
▶
.22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6x70R
6.5x57R, 7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS
.308 Win., .30–06, 9.3x74R
price on request
EL 22 and EL 44
T RUMPF
1
1.430,00 €
1.506,00 €
1.620,00 €
The Krieghoff Insert Barrel “KS” is not suitable for barrels equipped with Briley chokes.
30
K R IEGHOF F K- 80, K-20 A ND K X- 6
K R IEGHOFF K- 80 W I T H FIX ED CHOK ES
K-80 standard configuration with fixed chokes:
▶ Nickel plated steel action
▶ Hinge screws, top latch, screws and pins
are blued
▶ Selectable, mechanical single trigger
▶ Length adjustable trigger blade
▶
▶
▶
▶
▶
Light scroll engraving pattern
Adjustable comb
Standard wood
Stock finish: epoxy
Supplied in a gun case
Please find optional Briley screw-in chokes can be found under category “Service” on page 55.
K-80 Sporting shown with additional options and custom engraving
K-80 Sporting – Trap – Skeet
10.954,00 €
SP ORT
Barrel length: 76 (30") or 81 cm (32"); free-floated barrel set; various stocks for
Sporting/International Skeet or Trap, featuring Monte Carlo or straight style; forearm
styles can be individually selected.
K-80 Parcours shown with additional options and custom engraving
K-80 Parcours
11.291,00 €
Barrel length: 71 1 (28"), 76 (30") or 81 cm (32"); full length soldered barrel set;
“Parcours” stock, right-handed; fixed comb; “Parcours” forearm.
Optionally available with non-adjustable comb and oil finish.
1
Only available with Briley chokes.
31
K R IEGHOFF K- 80 W I T H SCR E W- IN CHOK ES
K-80 standard configuration with screw-in chokes:
▶ Free-floated barrel set
▶ Extended factory screw-in chokes, incl. five
steel choke tubes and choke wrench
▶ Nickel plated steel action
▶ Hinge screws, top latch, screws and pins
are blued
▶ Selectable, mechanical single trigger
▶
▶
▶
▶
▶
▶
Length adjustable trigger blade
Light scroll engraving pattern
Adjustable comb
Standard wood
Stock finish: epoxy
Supplied in a gun case
K-80 Trap shown with additional options and engraving option “Super Scroll”
K-80 Trap
11.464,00 €
Barrel length: 76 (30") or 81 cm (32"); soldered rib: 12 mm taper step; Monte Carlo
style “Trap” stock with “Trap” forearm.
K-80 ProTrap shown with additional options and engraving option “Heritage Game I”
K-80 ProTrap
12.021,00 €
SP ORT
Barrel length: 76 (30") or 81 cm (32"); adjustable rib: 10 mm tapered (12 mm with
chamfer); highest selectable shot pattern: 70/30; “ProTrap” stock with “Trap” forearm.
K-80 Trap Special shown with additional options and adjustable butt plate
as well as engraving option “Vintage Scroll”
K-80 Trap Special
12.189,00 €
Barrel length: 76 (30") or 81 cm (32"); adjustable rib: “Trap Special” 10 mm tapered
(12 mm with chamfer); highest selectable shot pattern: 100 % (optionally “Pro”
rib featuring 120 % high pattern); “Trap Special Rollover” right-handed stock with
“Trap” forearm.
32
K-80 Double Trap Special shown with additional options and blued engraving option
“Gold Standard”
K-80 Double Trap Special
12.528,00 €
Barrel length: 76 (30") or 81 cm (32"); adjustable rib: “Double Trap Special” 10 mm
tapered (12 mm with chamfer); highest selectable shot pattern: 100 %; “Trap Special”
right-handed stock, including an additional higher comb in black (see picture above);
“Trap” forearm.
K-80 Sporting shown with additional options and custom engraving
K-80 Sporting
11.464,00 €
SP ORT
Barrel length: 71 (28"), 76 (30") or 81 cm (32"); soldered rib: 10 mm taper flat;
“Sporting” stock with “Schnabel” forearm.
K-80 ProSporter shown with additional options and engraving option “Renaissance”
K-80 ProSporter
12.021,00 €
Barrel length: 76 (30") or 81 cm (32"); adjustable rib: 10 mm tapered (12 mm with
chamfer); “ProSporter” stock with “Schnabel” forearm stock.
33
K R IEGHOF F K-20
K-20 standard configuration:
▶ Free-floated barrel set
▶ Extended factory screw-in chokes, incl. five
steel choke tubes and choke wrench
▶ Nickel plated steel action
▶ Hinge screws, top latch, screws and pins
are blued
▶
▶
▶
▶
▶
▶
Selectable, mechanical single trigger
Length adjustable trigger blade
Light scroll engraving pattern
Standard wood
Stock finish: epoxy
Supplied in a gun case
K-20 Sporting and Hunting Gun shown with additional options
and engraving option “Parcours Special”
K-20 Sporting and Hunting Gun
11.464,00 €
Barrel length: 76 (30") or 81 cm (32"); soldered rib: 10 mm taper flat, soldered;
non-adjustable “Sporting” stock with “Schnabel” forearm.
K-20 ProSporter shown with additional options and custom engraving
K-20 ProSporter
12.021,00 €
Barrel length: 76 (30") and 81 cm (32"); 10 mm tapered (12 mm with chamfer);
adjustable “ProSporter” right-handed stock with “Schnabel” forearm.
SP ORT
K R IEGHOF F K X- 6
KX-6 standard configuration:
▶ Black nitro carbonized action finish
▶ Extended factory screw-in chokes, incl. three
choke tubes and choke wrench;
▶
▶
▶
Length adjustable trigger blade
T-Wood (walnut wood optically improved)
Supplied in a gun case
KX-6 Single Barrel Shotgun in standard configuration
KX-6 – Single barrel shotgun
4.706,00 €
Barrel length: 86 cm (34"); adjustable rib 12 mm taper flat; right-handed Monte Carlo
“Trap” stock with adjustable comb and “Trap” forearm.
34
S TA ND A R D G AUGE S
K-80
▶
▶
12/76 (3"), 20/76 (3"), 28/76 (3"), chambers are chrome plated
.410/76 (3"), chambers are not chrome plated
K-20
▶
▶
20/76 (3"), 28/76 (3"), chambers are chrome plated
.410/76 (3"), chambers are not chrome plated
KX-6
▶
12/76 (3"), chambers are chrome plated
A DDI T ION A L EQUIP MEN T
Krieghoff Balance System
▶
▶
Barrel weight for K-80, gauge 12, per item
The barrel could be provided with up to three additional 40g weights underneath the forend, thus making an increase of 120 g at the front end possible.
Stock weight for K-80
The buttstock can be equipped with a special stock bolt, which is 40 g heavier
than a standard stock bolt, and can accept up to three additional 30 g weights.
Thus, making buttstock up to 130 g heavier.
Price for stock screw including on extra weight
Price for further extra weights, per item
86,00 €
106,00 €
46,00 €
518,00 €
Adjustable butt plate
For K-80 and KX-6
24,00 €
Length of pull adjustment option
For K-80 and KX-6 – Length of pull can be easily adjusted with the addition of
optional pre-fitted 6.4 mm (1/4") spacers. Only in conjunction with adjustable butt
plate. Price per item.
269,00 €
Barrel porting
For gauge 12 – recoil and muzzle jump is reduced. Price per barrel.
+10%
“Matched Pair” arms
SP ORT
Upcharge of 10% with any order of a matching pair.
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 43.
SUR FACE FINISH
▶
▶
▶
Blued action and forend iron, including all external metal parts
Complete nickel finish of all external metal parts
Nitrate surface treatment of action and forend iron, including all
external metal parts
35
no extra charge
127,00 €
458,00 €
IN T ERCH A NGE A B L E B A R R EL S
Please find a table of the interchangeable barrel options on page 39. Standard version without forearm.
Interchangeable barrel K-80 with fixed chokes
▶
▶
▶
▶
K-80 Sporting/Skeet
Free-floated barrel set; barrel length: 76 (30") or 81 cm (32")
K-80 Trap
Free-floated barrel set; barrel length: 76 (30") or 81 cm (32")
K-80 Parcours
Full length soldered barrel set; barrel length: 71 1 (28"), 76 (30") or 81 cm (32")
Forend hanger for adapting free-floated barrel sets optional available
K-80 Trap Special/ProSporter/ProTrap
3.643,00 €
3.643,00 €
3.896,00 €
price on request
Interchangeable barrel K-80 with screw-in chokes
Free-floated barrel set; extended factory screw-in chokes, including two choke tubes
and choke wrench
▶ K-80 Trap
Rib: 12 mm taper step, soldered; barrel length: 76 (30") or 81 cm (32")
▶ K-80 ProTrap
Rib: 10 mm taper flat, adjustable; barrel length: 76 (30") or 81 cm (32")
▶ K-80 Trap Special
Rib: “Trap Special” 10 mm taper flat, adjustable; highest selectable shot
pattern: 100 % (alternative “Pro” rib with 120 % high pattern);
barrel length: 76 (30") or 81 cm (32")
▶ K-80 Double Trap Special 2
Rib: “Double Trap Special” 10 mm taper flat, adjustable; barrel length:
76 (30") or 81 cm (32")
▶ K-80 Sporting/Skeet
Gauge: 12/76, 20/76 3, 28/76 3, .410/76 3; Rib: 10 mm taper flat, soldered;
barrel length: 71 (28"), 76 (30") or 81 cm (32")
▶ K-80 ProSporter
Gauge: 12/76, 20/76 , 28/76, .410/76; Rib: 10 mm taper flat, adjustable;
barrel length: 76 (30") or 81 cm (32")
▶ K-80 Unsingle/Topsingle
Rib: 12 mm taper step, adjustable; barrel length: 86 cm (34")
4.158,00 €
4.714,00 €
4.714,00 €
4.839,00 €
4.158,00 €
4.714,00 €
5.671,00 €
Interchangeable barrel K-20 with screw-in chokes
SP ORT
Free-floated barrel set; extended factory screw-in chokes, including two choke tubes
and choke wrench
▶ K-20 Sporting
Gauge: 20/76 , 28/76, .410/76; Rib: 10 mm taper flat, soldered;
barrel length: 71 (28"), 76 (30") or 81 cm (32")
▶ K-20 ProSporter
Gauge: 20/76 , 28/76, .410/76; Rib: 10 mm taper flat, adjustable;
barrel length: 76 (30") or 81 cm (32")
4.158,00 €
4.714,00 €
CHOK E T UB E S
95,00 €
Factory screw-in chokes, 12, 20, 28 and .410 gauge
It is not possible to retrofit factory choke tubes to fixed choke barrels. See Briley
option below.
Available in the following constrictions:
Cylinder (00), Skeet (0), 1/4 (1), 1/4–1/2 (1+), 1/2 (2), 1/2–3/4 (2+), 3/4 (3), 1/1 (4),
Super-1/1 (5). Super full choke tubes only available for 12 gauge.
1
2
3
Only available with Briley chokes.
When using this barrel you may need a higher comb. Price on request.
71 cm (28") barrel length on request.
36
Flush fitted screw-in chokes by Briley, 12 and 20 gauge
137,00 €
Subsequent fitting of Briley chokes possible for shotgun barrels with fixed chokes,
also for barrels from other brands. Technical requirements will be checked carefully
by our master gunsmiths before fitting. Price per barrel.
Briley screw-in chokes
93,00 €
Available in the following constrictions: Cylinder (00), Skeet (0), 1/4 (1), 1/4–1/2
(1+), 1/2 (2), 3/4 (3), 3/4–1/1 (LF), 1/1 (4), Super-1/1 (XF)
One inch extended, non-ported Briley choke tubes are available on request.
Titanium screw-in chokes, 12 and 20 gauge
For all guns featuring factory screw-in chokes.
Available in the following constrictions: Cylinder (00), Skeet (0), 1/4 (1), 1/4–1/2
(1+), 1/2 (2), 1/2–3/4 (2+), 3/4 (3), 1/1 (4), Super-1/1 (5)
▶ Titanium screw-in chokest
▶ Titanium screw-in chokes in gold
153,00 €
204,00 €
Accessories
▶
▶
▶
▶
▶
Choke wrench
“Speed” wrench for quick choke changes (12 and 20 gauge)
Special grease for chokes
Container for three chokes
Container for five chokes
34,00 €
116,00 €
29,00 €
20,00 €
21,00 €
T I TA NIUM OP T IONS
Upcharge for titanium option instead of the standard configuration made of steel.
Titanium options
▶
▶
▶
Titanium trigger (including trigger group)
Titanium front hanger
Five titanium screw-in chokes of the standard configuration
106,00 €
51,00 €
297,00 €
Titanium options in gold
▶
▶
▶
Titanium trigger (including trigger group), in gold
Titanium front hanger, in gold
Five titanium screw-in chokes of the standard configuration, in gold
269,00 €
150,00 €
548,00 €
SP ORT
S T OCK S & W OOD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Wood Upgrade
▶
▶
▶
▶
437,00 €
988,00 €
1.325,00 €
1.658,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a hand
made stock.
▶ Category C1
▶ Category C2
▶ Category C3
37
2.971,00 €
3.813,00 €
4.654,00 €
Stock in oil or epoxy finish 1
▶
▶
▶
Standard dimensions
Special dimensions, made to customer’s specifications
Special dimensions, custom made stock with ergonomic grip and finger grooves
712,00 €
1.037,00 €
1.547,00 €
Stock with adjustable comb and oil or epoxy finish 1
▶
▶
▶
Standard dimensions
Special dimensions, made to customer’s specifications
Special dimensions, custom made stock with ergonomic grip and finger grooves
1.121,00 €
1.444,00 €
1.966,00 €
Forearm in oil or epoxy finish 1
▶
▶
Standard dimensions
Special dimensions, made to customer’s specifications
187,00 €
432,00 €
Interchangeable stocks with adjustable comb and epoxy finish
▶
▶
▶
“Trap” Monte Carlo, ProTrap oder “International Skeet/Sporting” stock,
model K-80
“ProSporter” stock, model K-80 or K-20
“Trap Special Rollover” stock, model K-80
1.100,00 €
1.100,00 €
1.268,00 €
Interchangeable stocks with non-adjustable comb and epoxy finish
▶
1.100,00 €
“Sporting and Hunting Gun”, model K-80 or K-20
Interchangeable forearm (forend iron not included) in oil or epoxy finish
▶
▶
▶
194,00 €
194,00 €
194,00 €
“Trap” or “Skeet”, model K-80
Schnabel forearm, model K-80 or K-20
“Parcours” forearm, model K-80
Additional charge for left-handed stocks
▶
▶
▶
K-80 “Sporting”, “Parcours”, “ProSporter”, “Trap Special” and
“Double Trap Special”
K-20 “ProSporter”
KX-6
329,00 €
329,00 €
329,00 €
MONOGR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the top latch or the trigger guard.
Monogram plate, finished the same as the receiver 1
SP ORT
▶
▶
134,00 €
390,00 €
Inletting into pistol grip cap
Steel pistol grip cap
Monograms
▶
▶
▶
▶
246,00 €
355,00 €
580,00 €
794,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
Locks
▶
▶
▶
▶
Internal lock parts nickel plated
Internal lock parts gold plated, trigger not included
Trigger gold plated (including trigger group)
Titanium trigger (including trigger group), in gold
1
Only available in conjunction with hand-crafted stock.
403,00 €
910,00 €
163,00 €
269,00 €
38
39
SCREW-IN CHOKES
FIXED CHOKES
●
●
●
●
●
●
●
─
─
─
○4
─
─
Trap Special
Double Trap Special
Sporting
Parcours
Trap
Skeet
●
○
─
●
●
─
ProTrap
71 cm | 28"
─
─
─
─
76 cm | 30"
─
●
●
●
●
●
●
●
81 cm | 32"
SP ORT
Standardv version (no extra charge)
Optional
Not available
●
●
●
●
●
●
●
─
Trap
●
●
●
●
71 cm | 28"
─
76 cm | 30"
●
81 cm | 32"
ProSporter
Sporting/Skeet
71 cm | 28"
4
3
2
1
─
─
─
76 cm | 30"
81 cm | 32"
●
●
●
71 cm | 28"
─
─
─
●
●
●
76 cm | 30"
Only available in calibre 12 and 20
Tapered step rib
12–8 mm tapered rib with chamfer
Only available with Briley chokes
●
●
●
81 cm | 32"
●
●
●
─
─
●
─
─
─
─
─
─
─
8–6
Width in mm
●
─
─
●
●3
●3
●3
─
●3
●
10–6
Barrel length
1/2–3/4
○
─
●
─
─
●
●
●
○
○
○
○
○
─
─
─
Other barrel and rib models on request.
─
●2
─
─
●
─
○
●
─
─
●
─
─
─
─
─
●
●
●
●
●
●
●
●2
●
Screw-in chokes
●
─
MOD-IMOD
●
─
─
Fixed chokes
3/4–4/4
Barrel length
IMOD-FULL
Barrel length
12–8
CHOKE-TYP
Skeet
Barrel length
Sk–Sk
RIB
opening
CALIBRE .410
Krieghoff
Steel
CALIBRE 28
Krieghoff
Titanium 1
CALIBRE 20
○
○
○
○
─
─
─
─
─
─
Briley
ThinWall 1
CALIBRE 12
T HE K- 80 M AT R I X
K R IEGHOF F E SSENCI A
Essencia side-by-side shotgun standard configuration:
▶ Round-bodied steel receiver
▶
▶ Sidelocks
▶
▶ Purdey-style third fastener
▶ Double barrel-hook lock-up
▶
▶ Ejectors
▶
▶ Fine English scroll engraving with gold
▶
accented inlays
Color case-hardened finish
Choice of straight-grip or Prince-of-Wales
pistol grip stock
Wood category 003
Traditional Tru-Oil finish
Supplied in an exclusive leather hard case
Krieghoff Essencia
Sidelock side-by-side shotgun
Essencia 12 side-by-side shotgun
▶
32.220,00 €
Gauge: 12/70; Barrel length: 71 cm (28"), 76 cm (30")
Essencia 20 side-by-side shotgun
▶
▶
▶
▶
Gauge: 20/76; barrel length: 68 cm (27"), 71 cm (28"), 76 cm (30")
Gauge: 16/70; barrel length: 71 cm (28")
Gauge: 16/70; barrel length: 76 cm (30")
Gauge: 28/76; barrel length: 71 cm (28"), 76 cm (30")
31.858,00 €
31.858,00 €
32.289,00 €
32.851,00 €
Essencia 28 side-by-side shotgun
▶
▶
Gauge: 28/76; barrel length: 71 cm (28"), 76 cm (30")
Gauge: .410/76; barrel length: 71 cm (28")
35.935,00 €
37.223,00 €
A DDI T ION A L EQUIP MEN T
Nitrated surface finish
no extra charge
Optional single trigger
1.291,00 €
Interchangeable barrels for 20 gauge frame
ESSENCI A
▶
▶
▶
▶
20 gauge barrel; without forearm
16 gauge barrel; barrel length: 71 cm (28") including forearm
16 gauge barrel; barrel length: 76 cm (30") including forearm
28 gauge barrel; with forearm
9.852,00 €
12.448,00 €
12.895,00 €
13.446,00 €
Interchangeable barrels for 28 gauge frame
▶
▶
28 gauge barrel; without forearm
.410/76 gauge barrel; barrel length: 71 cm (28") including forearm
10.970,00 €
14.295,00 €
+10%
“Matched Pair” arms
Upcharge of 10% with any order of a matching pair.
40
Essencia side-by-side shotgun standard configuration:
▶
Round-bodied steel receiver
▶
▶
Sidelocks
Double barrel-hook lock-up
▶
▶
Barrel length: 60 cm (24")
▶
▶
▶
Octagonal barrel
▶
Color case-hardened finish
▶
▶
Fine English scroll engraving with gold
accented inlays
Stock with cheeckpiece
Wood category 003
Traditional Tru-Oil finish
Supplied in an exclusive leather hard case
Krieghoff Essencia
Sidelock single shot rifle
Essencia single shot rifle
36.106,00 €
C A L IB R E S A ND G AU GE S
Available in the following constrictions:
.243 Win., 6.5x57R, 6.5x65R, .270 Win., 7x57R, 7x65R, .308 Win., .30–06,
.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R
A DDI T ION A L EQUIP MEN T
Nitrated surface finish
no extra charge
Ejector
4.815,00 €
Fluted octagonal barrel
1.376,00 €
Full length stock (“Stutzen”)
2.236,00 €
Interchangeable barrel without forearm
10.970,00 €
“Matched Pair” arms
+10%
ESSENCI A
Upcharge of 10% with any order of a matching pair.
41
Essencia side-by-side “Big Five” double rifle standard configuration:
▶ Round-bodied steel receiver
▶ Fine English scroll engraving with gold
▶ Sidelocks
accented inlays
▶ Double barrel-hook lock-up
▶ Color case-hardened finish
▶ Barrel length: 63.5 cm (25")
▶ Traditional style “Express” stock with
▶ Purdey-style third fastener
cheekpiece and pistol grip
▶ Double trigger
▶ Wood category 003
▶ Manual safety
▶ Traditional Tru-Oil finish
▶ Automatic Holland & Holland style ejector
▶ Supplied in an exclusive leather hard case
Krieghoff Essencia
Sidelock “Big Five” double rifle
Essencia “Big Five” double rifle
50.938,00 €
C A L IB R E S A ND G AU GE S
Available in the following constrictions:
.450/.400 N.E., .500/.416 N.E., .470 N.E., .500 N.E.
A DDI T ION A L EQUIP MEN T
Nitrated surface finish
no extra charge
Interchangeable barrel with forearm
21.611,00 €
“Matched Pair” arms
+10%
Upcharge of 10% with any order of a matching pair.
ESSENCI A
42
ENGR AV ING OP T IONS
The engraving patterns listed below are just a small sampling of the wood categories and engraving
combinations most frequently requested. In line with our philosophy of quality, all our engravings are
worked into the material of the action itself and never on attached plates.
The wood grade and surface finish of the metal parts can be chosen freely. Together with the engraving
patterns listed below, we just give you a recommendation of a certain wood grade in combination with a
specific metal part surface treatment, which compliments the appearance of the gun. The corresponding
extra cost for wood upgrades and metal part treatments, you will find under category “stocks & woodwork” and “surface finish”.
HUN T ING GUNS – ENGR AV ING OP T IONS
“Standard”
“Small arabesques”
Ornamental line engraving borders receiver.
Receiver nickel plated. Top lever, trigger guard, hinge
pin and forearm latch blued.
Hand engraved arabesque pattern on both sides.
Receiver nickel plated. Top lever, trigger guard, hinge
pin and forearm latch blued.
564,00 €
“Safari Scroll”
“Small game scene with leaf arabesques”
Full covering ornamental engraving.
Receiver nickel plated.
We recommend wood category 001.
Detailed game scene surrounded by leaf arabesque engraving. Motif for the game engraving each side can be
chosen freely. Receiver nickel plated. Top lever, trigger
guard, hinge pin and forearm latch blued.
We recommend wood category 001.
632,00 €
737,00 €
43
ENGR AV INGS
no extra charge
“Big Game”
“Small game scene with oak leaves”
Detailed game scene “African Game”. Motif for the
game engraving each side can be chosen freely.
We recommend wood category 002 combined with a
nickeled finish of all external metal parts.
Detailed game scene surrounded by oak leaf engraving.
Motif for the game engraving each side can be chosen
freely.
We recommend wood category 002 combined with a
nickeled finish of all external metal part
1.156,00 €
1.224,00 €
“Large game scene with leaf arabesques”
“Large game scene with oak leaves”
Elaborate engraving featuring two animals surrounded by leaf arabesques, as well as an engraved trigger
guard. Scenes for the game engravings can be chosen
freely.
We recommend wood category 002 combined with a
nickeled finish of all external metal parts.
Elaborate engraving featuring two animals surrounded
by oak leaves, as well as an engraved trigger guard.
Scenes for the game engravings can be chosen freely.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
2.955,00 €
1.623,00 €
ENGR AV INGS
“Full oak leaves”
“Fine English with roses & bouquet”
Luxurious, overall covering featuring deep engraved
oak leaves each side, as well as an engraved trigger
guard.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
Comprehensive overall covering featuring fine English
arabesques with rose & bouquet, as well as an engraved
trigger guard.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
2.955,00 €
4.409,00 €
44
HUN T ING GUNS – ENGR AV ING OP T IONS W I T H SIDE PL AT ES
The necessary side plates 1 for “S”-style engraving patterns are included in the price shown.
“Small English scroll”
“Small game scene with leaf arabesques”
Modest arabesque engraving per side, as well as on the
trigger guard.
We recommend wood category 002 combined with a
nickeled finish of all external metal parts.
Medallion of one deep engraved animal per side, surrounded by distinctive leave arabesques in combination
with an engraved trigger guard. Scenes for the game
engravings each side can be chosen freely.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
2.052,00 €
4.152,00 €
“Large game scene with leaf arabesques”
“Large game scene with English arabesques”
Elaborate engraving featuring three animals surrounded
by leaf arabesques each side, in combination with an
engraved trigger guard. Scenes for the game engravings
can be chosen freely.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
Elaborate engraving featuring three animals surrounded
by English arabesques each side, in combination with an
engraved trigger guard. Scenes for the game engravings
can be chosen freely.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
4.042,00 €
4.859,00 €
“Imperial”
Elaborate engraving featuring three animals surrounded by oak leaves each side, in combination with an
engraved trigger guard. Scenes for the game engravings
5.209,00 € can be chosen freely.
We recommend wood category 004 combined with a
“Gold Imperial”
nickeled finish of all external metal parts.
Same design including golden Krieghoff lettering as a
6.249,00 €
banderole.
5.588,00 €
1
Steel receiver only
45
ENGR AV INGS
“Large game scene with oak leaves”
Fine English arabesques in medallion-style, featuring
Krieghoff lettering as a banderole. We recommend wood
category 004 combined with nitrate receiver finish.
SEMP R IO – ENGR AV ING OP T IONS
Standard – black
Standard – nickel finish
Black anodized action finish without engraving.
We recommend standard wood category.
Nickel plated action finish without engraving.
We recommend standard wood category.
no extra charge
no extra charge
“Small arabesques”
“Large game scene with leaf arabesques”
Finely engraved arabesques on both sides combined
with a nickel finish.
We recommend wood category 001.
Elaborate engraving featuring two animals each side
surrounded by leaf arabesques, as well as an engraved
trigger guard. Motifs: red deer and wild boars.
217,00 € Nickel plated action finish.
We recommend wood category 002.
546,00 €
Interchangeable action frame
▶
▶
▶
Action frame in standard, featuring nickel plated or
black anodized action finish
Action frame with “small arabesque” engraving,
combined with a nickel finish
Action frame with “large game scene with leaf arabesques” engraving,
combined with a nickel finish
ENGR AV INGS
46
210,00 €
438,00 €
781,00 €
COMP E T I T ION SHO T GUNS – ENGR AV ING OP T IONS
Standard
“Vintage Scroll”
Light scroll engraving pattern. Nickel finish – top latch,
screws and pins are blued.
We recommend standard wood category.
Modest ornamental engraving with nickel finish.
Optional finishes include nitride or blued.
We recommend wood category 001.
no extra charge
127,00 €
“Vintage Game I”
“Celtic”
Modest ornamental engraving featuring wildfowl scenes
with two motifs per side.
We recommend wood category 003 combined with nitrate receiver finish.
Spacious Celtic ornament.
We recommend wood category 001 combined with
nickel finish.
844,00 €
“Sovereign Scroll”
“Rausch Scroll”
Completely covering acanthus leaves.
We recommend wood category 004 combined with
nitrate receiver finish.
Wide curled leaf ornaments.
We recommend wood category 001 combined with
nickel finish.
1.441,00 €
47
1.549,00 €
ENGR AV INGS
434,00 €
“Gold Standard”
“K-80 Logo Silver”
Standard engraving with gold border line. Krieghoff
emblem and lettering on the underside of the receiver
inlaid in gold.
We recommend wood category 002 combined with blued
surface finish.
K-80 logo along with border line on both sides, as well as
Krieghoff emblem and lettering on the underside of the
receiver all inlaid in silver.
We recommend wood category 003 combined with blued
surface finish.
2.259,00 €
2.703,00 €
“Parcours Special”
“Super Scroll”
Relief engraving featuring wildfowl scenes. Three different styles of engraving patterns are available.
We recommend wood category 003 combined with nickel finish.
Completely covering ornamental engraving.
We recommend wood category 002 combined with nickel finish.
3.099,00 €
2.885,00 €
ENGR AV INGS
“K-80 Logo Gold”
“Uplander”
K-80 logo along with border line on both sides, as well
as Krieghoff emblem and lettering on the underside of
the receiver all inlaid in gold.
We recommend wood category 003 combined with blued
surface finish.
Completely covering fine English arabesques. Medallion-style game scene. Motifs: ruffed grouse and woodcock.
We recommend wood category 003 combined with
nitrate receiver finish.
3.152,00 €
3.568,00 €
48
“Plantation”
“Plantation Scroll”
Completely covering fine English arabesques. Medallion-style game scene. Motifs: partridge and pigeon.
We recommend wood category 003 combined with
nitrate receiver finish.
Completely covering fine English arabesques.
We recommend wood category 003 combined with nickel finish.
3.899,00 €
3.568,00 €
“Suhl Scroll”
“Bavaria Royale”
Diamond-shaped ornamental engraving featuring leaf
arabesques.
We recommend wood category 003 combined with nickel finish.
Game scene with two motifs per side engraved in medallion-style, bordered by leaf arabesques.
We recommend wood category 003 combined with nickel finish.
5.138,00 €
“Gold Celtic”
“Gold Super Scroll”
Spacious Celtic ornamental engraving inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
Completely covering ornamental engraving. Border line
as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. Broken target in gold
on top latch.
We recommend wood category 003 combined with
nitrate receiver finish.
5.226,00 €
5.418,00 €
49
ENGR AV INGS
4.266,00 €
“Victorian Scroll”
“Gold Plantation Scroll”
Fine English arabesques in shape of large scrolls.
We recommend wood category 003 combined with
nitrate receiver finish.
Completely covering engraving with fine English arabesques. Border line as well as Krieghoff emblem and
lettering on the underside of the receiver inlaid in gold.
We recommend wood category 004 combined with nitrate receiver finish.
5.563,00 €
5.731,00 €
“Gold Uplander”
“Gold Plantation”
Completely covering fine English arabesques. Medallion-style game scene. Motifs: ruffed grouse and woodcock inlaid in gold. Border line as well as Krieghoff
emblem and lettering on the underside of the receiver
inlaid in gold.
We recommend wood category 004 combined with nitrate receiver finish.
Completely covering fine English arabesques. Medallion-style game scene. Motifs: partridge and pigeon inlaid in gold. Border line as well as Krieghoff emblem and
lettering on the underside of the receiver inlaid in gold.
We recommend wood category 004 combined with nitrate receiver finish.
6.621,00 €
6.621,00 €
ENGR AV INGS
“Vintage Game II”
“Heritage Scroll”
Modest ornamental engraving featuring wildfowl
scenes. Two motifs per side inlaid in gold. Border line as
well as Krieghoff emblem and lettering on the underside
of the receiver inlaid in gold.
We recommend wood category 003 combined with
nitrate receiver finish.
Fine English arabesques with a modest banderole and a
gold border line. Krieghoff emblem and lettering on the
underside of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
8.070,00 €
7.439,00 €
50
“Asprey Scroll”
“Gold Victorian Scroll”
Completely covering large acanthus leaves.
We recommend wood category 004 combined with
nitrate receiver finish.
Fine English arabesques in shape of large scrolls. Border
line as well as Krieghoff emblem and lettering on the
underside of the receiver inlaid in gold.
We recommend wood category 004 combined with nitrate receiver finish.
8.398,00 €
8.691,00 €
“Bavaria Suhl”
“Bavaria Suhl Mystic”
Ornamental engraving with mystical faces. Medallion-style hunting scenes with three motifs per side.
We recommend wood category 004 combined with nitrate receiver finish.
Ornamental engraving with mystical faces.
We recommend wood category 004 combined with nitrate receiver finish.
9.094,00 €
“Gold Bavaria Royale”
“Highland Game I”
Game scene with two animals inlaid in gold, engraved
in medallion-style and surrounded by leaf arabesques.
Border line as well as Krieghoff emblem and lettering on
the underside of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
Flowing thistle leaf ornamentals featuring wildfowl
scenes. Three motifs per side.
We recommend wood category 003 combined with
nitrate receiver finish.
9.791,00 €
9.782,00 €
51
ENGR AV INGS
9.094,00 €
“Highland Game II”
“Monarch”
Flowing floral ornamentals featuring wildfowl scenes.
Three motifs per side.
We recommend wood category 003 combined with
nitrate receiver finish.
Full covering leaf arabesques with gold border line.
We recommend wood category 004 combined with nitrate receiver finish.
9.904,00 €
9.791,00 €
“Waterfowl Medallion”
“Renaissance”
Completely covering acanthus leaves. Waterscape with
mallards and northern pintails engraved in medallion-style and surrounded by leaf arabesques.
We recommend wood category 004 combined with nitrate receiver finish.
Completely covering floral ornamentation, accented by
gold details. Gold inlaid lettering on the underside of the
receiver.
We recommend wood category 004 combined with nitrate receiver finish.
10.191,00 €
10.701,00 €
ENGR AV INGS
“Gold Highland Game I”
“Gold Highland Game II”
Flowing thistle leaf ornamentals featuring wildfowl
scenes, accented by gold details. Three motifs per side.
Border line as well as Krieghoff emblem and lettering on
the underside of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
Flowing floral ornamentals featuring wildfowl scenes,
accented by gold details. Three motifs per side. Border
line as well as Krieghoff emblem and lettering on the
underside of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
11.509,00 €
11.509,00 €
52
“San Remo”
“Heritage Game I”
Wildfowl in flight or hunting scene featuring leaf arabesques.
We recommend wood category 004 combined with
nitrate receiver finish.
Wildfowl surrounded by fine English Arabesques. Three
motifs per side. Border line as well as Krieghoff emblem
and lettering on the underside of the receiver inlaid in
gold.
We recommend wood category 003 combined with nitrate receiver finish.
11.588,00 €
11.932,00 €
“Crown Grade”
“Vintage Game III”
Modest ornamental engraving with gold accents and
wildfowl scenes. Three animals in gold per side.
Krieghoff emblem and lettering on the underside of the
receiver inlaid in gold.
We recommend wood category 004 combined with nitrate receiver finish.
Wildfowl or hunting scenes, expressed in gold relief.
The medallion-style engraving is completely framed by
leaf arabesques. Two motifs per side. Border line as well
as Krieghoff emblem and lettering on the underside of
the receiver inlaid in gold. Golden crown on top lever.
We recommend wood category 004 combined with ni12.398,00 € trate receiver finish.
“Heritage Game II”
“Gold Heritage Game”
Gold inlaid medallion of wildfowl scene, framed by fine
English arabesques. Three motifs per side. Border line
as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
Medallion of wildfowl scene, framed by fine English
arabesques. Three motifs per side in gold. Border line as
well as Krieghoff emblem and lettering on the underside
of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
21.832,00 €
53
26.623,00 €
ENGR AV INGS
15.599,00 €
C US T OM ENGR AV INGS
For years, engravers have artfully applied the finishing touch to guns, lending them a unique character
and an expression of their worth. Initial sketches stemming from a dialogue with the gun owner are
used to produce a harmonious design encompassing motif, style and material.
Krieghoff engravers have a comprehensive repertoire: from deep relief to the very finest Bulino style and
from classic hunting scenes to the multifaceted ornamentations of various eras. From precious metal inlays to surface finishing – there are no limits to their creative imagination.
Using their experience, finesse and talent, our engravers create fine works of art that reflect both the
passion and personality of the owner and the value and quality of an exquisite gun.
Our master engravers are able to realize virtually any special engraving requirement including the most
intricate custom engravings. For a proposal send us your request!
Price for plain, unengraved side plates 1
616,00 €
Engraving and wood upgrades are not included.
ENGR AV INGS
Custom Engraving I
Custom Engraving II
Deep engraved, full covering leaf arabesques with
ornamentic.
Relief-style engraved hunting scene, covered in oak and
thistle leaf with fine detailed elegant gold surrounding
line.
Custom Engraving III
Custom Engraving IV
Deep relief-style engraved wild boar scene with oak
leaves, surrounded by fine English arabesques.
Four different golds – yellow, white, green and red –
create the background for the Bulino style horses.
Accents applied in enamel.
A display of pictures, regarding further custom engravings, you will find under:
www.krieghoff.de/en/engravings
1
Steel receiver only
54
VA R IOUS
SERV ICE
Fitting of choke tubes, altering fixed chokes into screw-in chokes for all brands:
We offer the installation of thin-walled Briley choke tubes into shotgun barrels, also for other brands.
Technical requirements will be checked carefully by our master gunsmiths before fitting. After the
fitting the gun has to be re-proofed by the Proofhouse.
▶
Fitting of chokes per barrel for over & unders or drillings
137,00 €
▶
Fitting of one choke into a single barrel shotgun
214,00 €
▶
Service charge for C. I. P. barrel proof
53,00 €
▶
Service charge for C. I. P. barrel proof (steel shot)
60,00 €
93,00 €
Flush mount Briley choke tubes for gauges 12, 16 and 20
Available in the following constrictions:
Cylinder (CYL), Skeet (SK), 1/4 (IC), 1/4–1/2 (LM), 1/2 (MOD), 3/4 (IMOD),
3/4–1/1 (LF), 1/1 (F) and Super-1/1 (XF)
Chokes accessories
▶
▶
▶
▶
▶
▶
Choke wrench
“Speed” wrench for quick choke changes (12 and 20 gauge)
Special grease for chokes
Container for three chokes
Container for five chokes
One inch extended, non-ported Briley choke tubes
34,00 €
116,00 €
29,00 €
20,00 €
21,00 €
price on request
518,00 €
Adjustable butt plate
for K-80 and KX-6, including fitting of the aluminium base plate
GUN C A SE S
A display of pictures, regarding gun cases, can be found on page 58.
Exclusive leather case line in “Alba” leather-style
High-quality, brown leather gun case, made of precious “Alba” leather. The case
comes with a leather handle, and two revolving leather straps. Additionally the
corners of the case are reinforced with hand-stiched “Alba” leather patches for maximum durability. Two combination locks. The case interior is made of blue felt.
An individual custom-fit for the particular gun will be accomplished at the Krieghoff
factory. Price including modification services.
▶
▶
For hunting guns, up to a barrel length of 63.5 cm (25"), including scope
Weight: ca. 4.7 kg
For hunting guns, up to a barrel length of 63.5 cm (25"), including two scopes
and one extra barrel
Weight: ca. 5.5 kg
For over & under shotguns, up to a barrel length of 81 cm (32")
Weight: ca. 3.9 kg
55
1.371,00 €
1.540,00 €
1.371,00 €
VA R IOUS
▶
Aluminum gun case
High quality aluminum gun case, with stylish panels bearing the Krieghoff logo on
the exterior, and bordeaux red interior lining with the Krieghoff logo embroidered.
Especially safe due to two key and one combination lock. With separate compartments
for scope, ammunition and accessories. An individual custom-fit for the particular gun
will be accomplished at the Krieghoff factory. Price including modification services.
▶
▶
▶
▶
For hunting guns, up to a barrel length of 63,5 cm (25"), including scope
Weight: ca. 6.7 kg
For hunting guns, up to a barrel length of 63,5 cm (25"), including two scopes
and one extra barrel
Weight: ca. 7.4 kg
For over & under shotguns, up to a barrel length of 86 cm (34")
Weight: ca. 6.4 kg
For over & under shotguns, up to a barrel length of 86 cm (34"), including one
extra barrel
Weight: ca. 8.0 kg
888,00 €
1.020,00 €
888,00 €
1.020,00 €
Krieghoff GunPack
This hard-top gun case is made out of black, shock resistant “ABS” plastic material
assembled by ultrasonic welding and the addition of “ABS” at the fluid state.
A Krieghoff lettering in gold is on the upper left of the outer front and inner top part.
The inside is made out of velvet-like, blue cloth. It is pre-formed to exactly fit your
hunting gun, a scope, and accessories or ammunition. Four hook-and-loop fasteners
additionally secure the content. Four pushable catches avoid unwanted opening.
Krieghoff GunPack for Hunting Guns
▶ Barrel length: max. 74 cm (29")
▶ Weight: ca. 2.6 kg
51,00 €
Krieghoff GunPack for Semprio
▶ Barrel length: max. 79 cm (31")
▶ Weight: ca. 2.6 kg
51,00 €
Krieghoff gun case – premium edition
A high class hard-top gun case is made out of shock resistant “ABS” plastic material
assembled by ultrasonic welding and the addition of “ABS” at the fluid state. Brown
leather applications guide the edges and Krieghoff is printed in gold on the front.
The inner is made of velvet-like cloth. The bottom part is pre-formed and offers
space for the receiver-stock-unit, securable by hook-and-loop fastener, as well as
accessories. The upper part is pre-formed for two barrels. The divider pad can be
attached to the upper part with two hook-and-loop fasteners securing barrels and
extras. Your gun is safe with three – independent settable – combination locks from
unauthorized access.
Krieghoff gun case for hunting guns – premium edition
Including one extra barrel. Suitable for all Krieghoff huntings guns except for the
Krieghoff Ultra.
▶ Color: green/blue
▶ Barrel length: max. 87 cm (34")
▶ Weight: ca. 2.8 kg
282,00 €
Krieghoff gun case for Semprio – premium edition
Including two scopes and one extra barrel
▶ Color: green/blue
▶ Barrel length: max. 87 cm (34")
▶ Weight: ca. 4.2 kg
318,00 €
Krieghoff gun case for K-80 – premium edition
Including one extra barrel
▶ Color: blue/red
▶ Barrel length: max. 87 cm (34")
▶ Weight: ca. 3.4 kg
295,00 €
VA R IOUS
56
SHOO T ING V E S T S
A display of pictures, regarding shooting vests, can be found on page 58.
Krieghoff “London” shooting vest – left and right-handed
160,00 €
Available without mesh back.
VA R IOUS
Krieghoff neopren gun strap
The elastic neopren material allows for highest wearing comfort and offers optimal
protection against the strap sliding of the shoulder. With Krieghoff emblem embossed.
▶ Standard version
▶ Exclusive version – with leather top
48,00 €
64,00 €
Gun care
13,00 €
29,00 €
“Gun Glide”, gun crease, 50 g tube
Special grease for chokes
Additional accessories like hats, shirts, books, DVDs etc.
you will find under: www.krieghoff.de/shop
NE SH
57
VA R IOUS
LI
O
P
O
N
I EGHO
FF
KR
▶
▶
A P P ENDI X
Alba leather case
Aluminium gun case
Krieghoff GunPack
Krieghoff gun case – premium edition
Shooting Vest “London”
Krieghoff see through sight for hunting guns
Barrel porting for Semprio
Fluted barrel for Semprio
VA R IOUS
58
Krieghoff see through sight for Semprio
Muzzle threading with and without individually
adapted thread cover bushing
Semprio Pro Mount
Factory chokes (black) ,optional titanium chokes
(polished) and optional titanium chokes in gold
Barrel porting for K-80
Krieghoff Balance System – barrel weights
Krieghoff Balance System – stock weights
59
VA R IOUS
“Compact” version with additional sling swivels
on the side of forend and buttstock
Custom made stock with ergonomic grip and finger
grooves as well as an adjustable butt plate
Length of pull adjustment
Monogram in gold on the trigger guard
Stock magazine with custom engraving
Inletting into pistol grip cap with custom engraving
Steel pistol grip cap with custom engraving
Broken target in gold on top latch.
“Imperial design” – extended steel trigger guard
VA R IOUS
60
MEMO
I.
Scope mounts
Scope mounts, carried out at the Krieghoff factory will include sighting-in. On guns with more than one
barrel, we also guarantee that a certain grouping of the barrels will be obtained. For scope mounts done by
anyone else, an extra charge will be applied for sighting-in of the gun. Further we can’t give any warranty
for common point of impact accuracy on guns with multiple barrels. If the installation of the scope mount
was not carried out by us, we don’t take any responsibility for the performance of grouping.
Because of physical reasons, the point of impact (grouping of the barrels) on guns featuring multiple barrels
can only be adjusted for one type of sight (rather open sight or scope). If nothing else was requested by the
customer and the scope mount was done at the Krieghoff factory, we always sight-in guns featuring multiple
barrels over the scope. If several scopes are being mounted, explicit information is required for which scope
the grouping performance need to be obtained. If no information is being supplied, we will use the largest
scope to ensure grouping accuracy.The points mentioned above are also valid for insert barrels.
II.
Model thermo stable
If thermo stable models are ordered with cosmetic side ribs, we strongly recommended, for optimum and
aesthetic reasons, that the scope mounting and sighting-in process is carried out at the Krieghoff factory.
III.
Guarantee
If scope installation is carried out by anyone other than Krieghoff and the barrels require subsequent reblueing, all warranty regarding blueing and shooting accuracy will be void.
IV.
Shooting accuracy
The accuracy of the gun can only be guaranteed if the same type of ammunition is used as the gun was
sighted-in with. Therefore we recommend to acquire a sufficient stock of ammunition of the same loading
used to sight-in your gun, especially if the gun has multiple rifled barrels. This applies to rifle cartridges as
to shot gun slugs.
61
MEMO
In big bore double rifles semi jacketed bullets and full metal jacketed bullets are often being used side by
side. Although this might be very useful, accuracy can only be guaranteed with one type of ammunition
load. Test shots with a second load or even finding two loads that work together are only done on special
request and have an additional time and ammunition charge.
H. Krieghoff GmbH ∙ Hunting and Sporting Arms
Boschstrasse 22 ∙ 89079 Ulm ∙ Germany
Phone: +49 (0) 7 31 / 4 01 82-0 ∙ Fax: +49 (0) 7 31 / 4 01 82-800
info@krieghoff.de ∙ www.krieghoff.de
Download