Industrial Interface – RS-485, CAN, Isolation, Ethernet Cem Özdere TI Information – Selective Disclosure 1 Interface Products Communications Interface Industrial Interface Consumer & Computer Interface LVDS RS-485 / RS-422 SuperSpeed USB 3.0 & USB 2.0 M-LVDS CAN Redrivers & Equalizers xECL Digital Isolation Digital Video Interfaces Signal Conditioners / Equalizers Ethernet PCI-Express & PCI Telecom SerDes 1394 (Firewire) Crosspoints UARTs Optical Module ICs TI Information – Selective Disclosure RS-485 – Latest or Most Popular Product Offerings TI Information – Selective Disclosure 3 RS-485 (EIA-485 or TIA/EIA-485) Most versatile communication standard 1) Can connect data terminal equipment (DTE) directly without the need of modems 2) Can connect several DTE's in a network structure 3) Ability to communicate over longer distances (up to 1200m) 4) Ability to communicate at faster communication rates (up to 50Mbps) Differential signaling and Twisted pair allow better noise immunity Multipoint communication RS-485 Features Parameter Maximum common-mode voltage -7V to 12V Receiver input resistance 12k min Receiver sensitivity Driver load Driver output short-circuit limit TI Information – Selective Disclosure RS-485 200mV 60 250mA Why TI RS-485? Wide selection of offerings Fault protection features Industry expertise in RS-422/RS-485 Combination with isolation Complete board solution RS-485 PORTFOLIO TI Information – Selective Disclosure SN65HVD308xE Transceivers 5V Full & Half Duplex RS-485 Economical & Low Power Features Benefits • Small MSOP Pin Package - 5x3mm • Low Quiescent Power • <0.4 mA Active Mode • <2 nA Shutdown Mode • 200kbps Optimized for Low EMI & Long Cables • 1/8 Unit load – 256 nodes on a bus • Failsafe Receiver (Open, Shorted, Idle) • Best-in-Class Bus >±15 kV HBM ESD Protection • Glitch−Free Power−Up/Down • • • • • Applications • • • • • • • • Energy Meter Networks Power Inverters Industrial Automation Building Automation Networks Motor Control Battery-Powered Applications Telecommunications Equipment Point of Sale (POS) Terminals TI Information – Selective Disclosure Reduced Space Board designs Low Power – Battery Powered designs Low Noise Emission and Longer Bus Lengths High Reliability in Harsh Environments Hot pluggable without data Corruption Full Half Part # Data Rate Duplex Package SN65HVD3082E* 200kbps Half PDIP-8/SOIC-8/MSOP-8 SN65HVD3085E 1Mbps Half SOIC-8/MSOP-8 SN65HVD3088E 20Mbps Half SOIC-8/MSOP-8 SN65HVD3080E 200kbps Full MSOP-10 SN65HVD3083E 1Mbps Full MSOP-10 SN65HVD3086E 20Mbps Full MSOP-10 SN65HVD17xx Transceivers 3V – 5V Full & Half Duplex RS-485 Survive ±70V Faults Plus Wide Common mode Features Benefits • • • • • • • • • Ultra High reliability Harshest conditions • Over voltage protection to ±70V • No termination needed for protection!! • Wide Common for large ground differences • Flexible Wide VCC Range of operation • High ESD Protection added survivability • Hot pluggable without data Corruption • Versions for all Applications Bus-pin fault protection up to ±70V -20V to +25V Common mode operation 3V to 5V VCC operation Bus ESD Protection +16kV JEDEC HBM Up to 256 or 320 Nodes Failsafe Receiver (Open, Shorted, Idle) Low Power - 6 mA Active / 5 μA Shutdown Glitch−Free Power−Up/Down Applications • ANY Application with potential to short to -70V to 70V!!! Drop in Upgrade for Standard RS485 TI Information – Selective Disclosure Part # Data Rate Duplex Features Package SN65HVD1780 115kbps Half 3V to 5V VCC SOIC-8/PDIP-8 SN65HVD1781 1Mbps Half 3V to 5V VCC SOIC-8/PDIP-8 SN65HVD1782* 10Mbps Half 3V to 5V VCC SOIC-8/PDIP-8 SN65HVD1785 115kbps Half 5V VCC, -20V to 25V CM SOIC-8/PDIP-8 SN65HVD1786 1Mbps Half 5V VCC, -20V to 25V CM SOIC-8/PDIP-8 SN65HVD1787* 10Mbps Half 5V VCC, -20V to 25V CM SOIC-8/PDIP-8 SN65HVD1791 115kbps Full 5V VCC, -20V to 25V CM SOIC-14 SN65HVD1792 1Mbps Full 5V VCC, -20V to 25V CM SOIC-14 SN65HVD1793* 10Mbps Full 5V VCC, -20V to 25V CM SOIC-14 SN65HVD1794 115kbps Half 5V VCC, -20V to 25V CM, Cable Invert SOIC-8 * Implies -70V /+30V bus fault protection HVD17xx Transceivers Survive ±70V Faults Plus Wide Common mode Standard Operating range Extended Operating range Survivable range -70 -20 HVD1785/6/7 HVD1790/1/2/4 Operation -20V to +25V Survive: -70V to +70V Industrial Field Bus power HVAC power supply Telecommunications Automotive TI Information – Selective Disclosure -7 +12 Standard RS-485 Operation: -7 to +12 Survive: -9 to +14 HVD2x Family Operation -20V to +25V Survive: -27V to +27V 0 (24 VDC --up to 34V) (24 VAC --up to 38V) (-42VDC --up to -60V) (42VDC --up to 50V+) 25 70 SN65HVD147x/7x Series Robust 3.3V, Full-Duplex RS-485 with industry-leading +16kV IEC61000-4-2 Contact Discharge ESD protection Features • Robust industry-leading RS-485 Bus I/O Protection • ±16 kV IEC61000-4-2 Contact Discharge (HVD147x) • ±12 kV IEC61000-4-2 Contact Discharge (HVD7x) • > +30kV HBM ESD (modeled up to +40kV)* • +4kV IEC61000-4-4 Fast Transient Burst • Industrial Temperature Range –40°C to 125°C • Large Receiver Hysteresis (70mV) for Noise Rejection • Low Power Consumption • <1 mA Quiescent Current • Standby Current … 10 nA Typical TI Confidential – NDA Restrictions Benefits • Robust to transients • Installer handing • Contact with a charged object • Brush motor arcing transients • Reliable operation in harsh environments • Immune to conducted differential noise • Power efficient • Reduced power supply size • Long battery life • Useful for wide range of applications, long cables SN65HVD888 RS485 Transceiver 250kbps w/ automatic polarity correction Features Benefits • • • • • • • • • • • • • • 5V supply voltage with 10% tolerance IEC ESD protection Automatic polarity correction > ±13V survivability on bus pins Low quiescent supply current (<800 uA) Extended industrial temperature range 5V-tolerant D, DE, RE inputs Applications • • • • • • E-Metering Networks Industrial Automation HVAC Systems DMX512-Networks Process Control Battery-Powered Applications TI Confidential – NDA Restrictions Low power, fewer supplies Reliable in high noise environments Prevents system failure in case of mis-wiring Survive shorts to wide range of voltages Power savings Eliminate cooling fans, ease system design Compatible with 5V controllers SN65HVD01: 3.3V RS-485 with Low-Voltage I/O and Switchable Signaling Rate Features Benefits • • • • • • • Low-voltage Input/Output Supply (1.65V to 3.6V) Switchable signaling rate (250 kbps or 20 Mbps) 3V to 3.6V supply for Bus signals High receiver hysteresis (40 mV minimum) Low-power standby mode (100 nA typical) IEC ESD protection • > ±15kV HBM protection • > ±12kV IEC61000-4-2 Contact Discharge • > ±12kV IEC61000-4-2 Air-Gap Discharge • Small 10-pin 3mm x 3mm SON package • • • • • • Replacement to the MAX13430E and MAX13431E 50% lower standby current vs MAX1343xE Interface with low-voltage micro-controllers Saves board space Optimize for slow & long network, or fast network Immune to differential-mode noise Use in battery-powered systems, or wherever power consumption is critical Applications • • • • • • • • Telecommunications equipment Factory Automation Motor Control High Speed Data Links Low-voltage Microcontroller Communications Portable Industrial Equipment HVAC Industrial Control Systems TI Information – Selective Disclosure 11 Isolated RS-485 with Transformer Driver • Integrated transformer driver • Meets or Exceeds TIA/EIA RS-485 • Bus-Pin ESD Protection >10kV GND2 & 6kV GND1 • 1Mbps / 20Mbps / 40Mbps • 1/8 Unit load – 256 nodes on a bus • Glitch-Free & Failsafe (Open, Shorted, Idle) • Silicon Integrated SiO2 Insulator • 2500Vrms Withstand, 560Vpk Working Voltages - UL1577, IEC 60747-5-2 (VDE 0884, rev. 2), IEC 61010-1 & CSA pending • • • • • • Energy Meter Networks Power Inverters Industrial Automation Building Automation Networks Motor Control HVAC TI Information – Selective Disclosure • • • • • • • Ease of isolated power design Fully compliant to RS-485 Standard High Reliability in Harsh Environments Optimized for Long Cables Or High Speed Large buses Hot pluggable & Protected in all situations Proven Reliability of SiO2 Insulation, Stable over Time, Temperature & Moisture - Life Span > 25 years @ 125oC Part # Duplex Function Speed Package ISO1176T Half Profibus 40Mbps SOIC-16 (DW) ISO35T Full 3.3V RS485 1Mbps SOIC-16 (DW) ISO3086T Full 5V RS485 20Mbps SOIC-16 (DW) CAN – Portfolio and New Releases TI Information – Selective Disclosure 13 Controller Area Network (CAN) Highly robust serial communication standard • Inter-module bus design • Allows microcontrollers and devices to communicate with each other within a vehicle without a host computer. • Excellent prioritization and arbitration capabilities • Used in automotive, industrial, medical applications CAN in automotive application CAN bus logic state voltage definitions CAN Features Parameter CAN Signaling <1Mbps Distance <400m Nodes 30 Maximum common-mode voltage Cable Characteristic impedance -2V to 7V 120 Why TI CAN? Wide selection of offerings Synergy with automotive developments Synergy with TIVA CAN controllers Combination with isolation Complete board solution TI Information – Selective Disclosure ISOLATED CAN Industrial CAN Transceiver Portfolio S / STB / SLP = Operating Modes: S=Silent, STB = Low Power Standby Mode with bus wake (RXD active), SLP = Low Power Sleep Mode SC = Driver slope control LBK / AB = Loopback modes: LBK = Diagnostic, AB = Autobaud TDTO = TXD Dominant Time Out (37kbps min data rate) TDTO2 = TXD Dominant Time Out (9.4kbps min data rate), LS = Level Shifting RXD pin for 2.8 – 5.5V μP I/O Turbo = Optimized Loop Times for Industrial Networks & CAN timing margin FD = CAN with Flexible Data Rate -- Optimized Loop Symmetry MT = Multi-Topology CAN DN = Optimized for DeviceNet EMC = Optimized for lowest emissions VREF = Vcc/2 VREF or SPLIT output D / P / DRJ / DW / DUB / DRB / DCN = Package ISO1050 -27/+40V, -55/105C, DW / DUB, TDTO, ISO: 5k / 2.5kVRMS SN65HVD267 -27/+40V, -40/125C, D, S, TDTO2, MT, Turbo + FD CAN SN65HVD266 SN65HVD253 SN65HVDA541 -27/+40V, -40/125C, D, S, AB, DN -27/+40V, -40/125C, D, STB, TDTO2, LS, EMC -27/+40V, -40/125C, D, S, TDTO2, LS, Turbo + FD SN65HVD265 -27/+40V, -40/125C, D, S, TDTO2, Turbo + FD SN65HVD252 SN65HVDA540 -27/+40V, -40/125C, D, S, VREF, DN -27/+40V, -40/125C, D, STB, TDTO2, LS, EMC SN65HVD257 SN65HVD232 -27/+40V, -40/125C, D, S, TDTO2, MT, Turbo -4/+16V, -40/85C, D SN65HVD235 +/- 36V, -40/125C, D, AB, STB, SC, VREF SN55HVD251 SN65HVD1040 SN65HVD256 SN65HVD231 SN65HVD234 +/- 36V, -55/125C, DRJ, STB, SC, VREF -27/+40V, -40/125C, D, STB, TDTO, VREF, EMC -27/+40V, -40/125C, D, S, TDTO2, LS, Turbo -4/+16V, -40/85C, D, SLP, SC, VREF +/- 36V, -40/125C, D, STB, SLP, SC, VREF SN65HVD251 SN65HVD1050 SN65HVD255 SN65HVD230 SN65HVD233 -27/+40V, -40/125C, D, S, TDTO2, Turbo -4/+16V, -40/85C, D, STB, SC, VREF +/- 36V, -40/125C, D, LBK, STB, SC, VREF +/- 36V, -40/125C, D / P, STB, SC, VREF TI Confidential – NDA Restrictions -27/+40V, -40/125C, D, S, TDTO, VREF, EMC 5V CAN Transceivers EXISTING NEW 3.3V CAN Transceivers SN65HVD255 / 256 5V “Turbo” CAN Transceivers FEATURES • Meets ISO 11898-2 • Footprint: PCA82C250/251 and TJA1050/1051 • “Turbo” CAN: Extremely short propagation delay times and fast loop times to enable higher data rates. • “Ideal Passive” behavior when unpowered – no loading on the CAN bus or I/Os • ±12kV HBM ESD protection for CAN bus pins • -27V to +40V CAN Bus Pins Fault Protection • TXD dominant time out protection • Digital I/O: Digital Inputs 3V compatible (TXD, S) •SN65HVD255: 5V VCC (RXD output 5V) •SN65HVD256: 5V VCC & VRXD for RXD from 2.8V to 5.5V • Temperature range: -40 to +125C SN65HVD255 TXD DTO S GND CANH VCC CANL NC RXD SN65HVD256 BENEFITS • Easy upgrade / transition path from PCA82C250 / 251 / 1050 / 1051 (HVD255) • Compliant with CAN standard physical layer • “Turbo” CAN: 10kbps through >1Mbps data rates & high data rates in long & loaded CAN Networks -- adds timing margin for CAN systems • Extensive system fault protections in transceiver • 5V CAN with direct interface to 3V μP (HVD256) • TXD Dominant Time Out protection with data rates down to 9.4kbps • TIUnpowered device doesn’t load network or other system components Information – Selective Disclosure TXD DTO S CANH GND CANL VCC Output Buffer RXD VRXD SN65HVD265/SN65HVD266 5V “Turbo” CAN Transceivers for Flexible Data Rate (FD) Features Benefits • • • • • • • • • ISO 11898-2 Compliant and Draft CAN FD “Turbo” CAN: • Signaling Rates: 8Kbps to 2Mbps CAN with Flexible Data Rate Ideal Passive – High impedance I/Os when unpowered Common-Mode Range: -2 to 7V Protection Features: • -27V to +40V Bus-Fault Protection • ±12kV HBM ESD and ±8kV IEC ESD Protection • TXD Dominant State Time-out 3.3V RXD Output Option (266) Temperature Range: -40° to +125°C Package: SOIC-8 (5mm x 6mm) Applications • • • • • • • Up to 2Mbps CAN FD applications Highly loaded CAN networks Industrial Automation Building & Climate Control Automation Security Systems Telecom Base Station Status and Control CAN Bus standards such as CANopen, DeviceNet, NMEA2000 TI Information – Selective Disclosure • • • • • Compliant to new ISO 11898-2 timing requirements for use in 2Mbps CAN FD applications Compliant with CAN standard physical layer No loading on the network or other system components Ability to operate at data rates down to 10kbps Extensive system fault protections in transceiver HVD266: Fully CAN compliant (5V) with 3.3V MCU support ISO1050 Isolated 5V High Speed CAN Transceiver Features Benefits • Industry's first Isolated CAN transceiver • Meets or Exceeds ISO 11898 • Isolated CAN w/ Ultra low loop time (210ns max) • Safety Features: • Driver (TXD) Dominant Time-out Function, BusFault protection, Undervoltage Lockout, Thermal Protection • ±4kV HBM ESD Protection on all pins • Very Low EME (Electro-Magnetic Emissions) • CMTI > 25 kV/µs • Silicon Integrated SiO2 Insulation • 4kVpk / 2.5kVrms – DUB • 7kVpk / 5kVrms – DW • VDE; UL1577 ; IEC ; CSA; TUV; CQC approvals • • • • • Applications • • • • • • • Reduce Components and Board Space - 30% Meets DeviceNet and CAN timing requirements High Speed Isolation allows longer buses – 34% Low EME reduces interference with other devices CMTI (reduced susceptibility) supports reliable data transmission in noisy environments • Proven Reliability of SiO2 Insulation, Stable over Time, Temperature & Moisture - Life Span > 25 years @ 105oC Part # Isolation Temp (C) Package ISO1050DUB 4kVpk/2.5kVrms -55 to 105 SOP-8 ISO1050DW 7kVpk/5kVrms -55 to 105 SOIC-16 Medical – ISO1050DW Motor Control Industrial Automation DeviceNetTM Data Buses SAE J1939 Standard Data Bus Interface ISO 11783 Standard Data Bus Interface NMEA 2000 Standard Data Bus Interface EVM TI Information – Selective Disclosure ISO1050EVM Compatible with 75+ TI Processers with CAN controllers : C2000, TMS470 ARM, LM3Sxxxx ARM3 Cortex - M3, OMAP3505/3517 TI Confidential – NDA Restrictions Isolation Technology TI Information – Selective Disclosure 19 ISOLATION TI SiO2 capacitive isolation Galvanic isolation The ability to exchange signals between two circuits without allowing the flow of current Benefits of isolation in electrical systems Break ground loops Reduce common mode noise Safety from high voltages w/o isolation with isolation GPD: Ground potential difference Why TI Isolation? Most stable dielectric over temp, moisture Highest lifetime in the industry Highest magnetic immunity Breadth of stand-alone and integrated ISO Complete board solution TI Information – Selective Disclosure Isolation terminology 1. Working or Operating Voltage: Continuous voltage across isolation (560Vpk or 890Vpk) 2. Isolation or Transient Voltage (Vrms): Transient voltage across isolation (4kVpk or 6kVpk) 3. Basic Isolation: 560Vpk continuous, 4kVpk transient voltage 4. Reinforced Isolation: 890Vpk continuous, 6kVpk transient,10kV surge voltage Medical needs 5kVrms transient 5. Creepage and Clearance: surface-distance across isolation that may conduct if wet or polluted TI Information – Selective Disclosure BASIC* REINFORCED* Digital Isolators ISO7810 ISO7820 ISO7821 VDE Reinforced Highest Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W VDE Reinforced Highest Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W VDE Reinforced Highest Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W ISO7830 ISO7831 ISO7840 ISO7841 ISO7842 VDE Reinforced Highest Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W VDE Reinforced Highest Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W VDE Reinforced Highest Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W VDE Reinforced Highest Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W VDE Reinforced Highest Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W ISO7710 ISO7720 ISO7721 ISO7730 ISO7731 ISO7740 ISO7741 ISO7742 5kVrms High Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W, SOIC-8N 5kVrms High Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W, SOIC-8N 5kVrms High Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W, SOIC-16, QSOP-16 5kVrms High Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W, SOIC-16, QSOP-16 5kVrms High Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W, SOIC-16, QSOP-16 5kVrms High Immunity FS Hi/Lo, Low EMI 100 Mbps SOIC-16W, SOIC-16, QSOP-16 ISO7310(F)C ISO7320(F)C ISO7321(F)C ISO7330(F)C ISO7331(F)C ISO7340(F)C ISO7341(F)C ISO7342(F)C 3kVrms Low Power, Filter 25 Mbps SOIC-8N Failsafe H/L 3kVrms Low Power, Filter 25 Mbps, SOIC-8N Failsafe High/Low 3kVrms Low Power, Filter 25 Mbps SOIC-8N Failsafe High/Low 3kVrms Low Power, Filter 25 Mbps SOIC-16W Failsafe High/Low 3kVrms Low Power, Filter 25 Mbps SOIC-16W Failsafe High/Low 3kVrms Low Power, Filter 25 Mbps SOIC-16W Failsafe H/L 3kVrms Low Power, Filter 25 Mbps SOIC-16W Failsafe H/L 3kVrms Low Power, Filter 25 Mbps SOIC-16W Failsafe H/L 1 / 0 SINGLE 5kVrms 5kVrms High Immunity High Immunity FS Hi/Lo, Low EMI FS Hi/Lo, Low EMI 100 Mbps 100 Mbps SOIC-16W, SOIC-8N SOIC-16W, SOIC-16, QSOP-16 2 / 0 1 / 1 ISO7131CC ISO7140(F)CC ISO7141(F)CC Low power Fail Safe High 50 Mbps Small QSOP-16 Low power Low power Fail Safe (Low) / High Fail Safe (Low)/ High 50 Mbps 50 Mbps Small QSOP-16 Small QSOP-16 2 / 1 3 / 0 4 / 0 TRIPLE DUAL New Preview Roadmap Low power Fail Safe High 50 Mbps Small QSOP-16 2 / 2 QUAD CHANNEL COUNT Existing 3 / 1 ISO7142CC *Reinforced/Basic per VDE standard Q100 Coming ISO73xx Low Power Basic Isolators Available Low Power 3.0kVrms Digital Isolators Enhanced Features Include Benefits • Integrated SiO2 Dielectric Capacitor • Higher performance vs ISO72x Family • • • • Up to 25Mbps data rate Max Prop Delay: 58ns (5V) CMTI: 70kV/µs (typical), 25kV/µs (min) at 5V Low Power Consumption, Typ Icc per channel 1Mbps: • ISO7340: 0.9mA (5V), 0.7mA (3.3V) • ISO7341: 1.2mA (5V), 0.9mA (3.3V) • Isolation Levels and Certifications • • • • 3000 VRMS Isolation Rating (UL 1577) 6000 VPEAK Surge 1000 VRMS Working Voltage in SOIC-16DW (3 and 4ch) 400 VRMS Working Voltage in SOIC-8N (1 and 2ch) • • • 20% increase in isolation rating 50% increase in surge protection 3-5x lower active power over ISO72xx family • Enhanced design • • Integrated Glitch Filters Enhanced IEC Immunity: ESD, EFT, Surge performance , Low EM emissions. • Pin to Pin Compatibility • with ISO72x, ISO72xx, ISO74xx, ISO75xx, ISO76xx • Immunity and Robustness • • • IEC 61000-4-2 Level 3 ESD up to 6kV IEC 61000-4-4 Level 4 EFT at 4kV Power, 4kV I/O IEC 61000-4-5 Level 4 Surge at 6kV (Air) • Power and Temp Range • • • 3V to 5.5V Supply Voltage Wide operating temperature -40 to 125°C SOIC-8N (1 and 2ch), SOIC-16W (3 and 4ch) Applications • Industrial Automation • Motor Control • Power Supplies / Solar Inverters / Medical Equipment Q100 – Automotive Qualified 4Q15 ISO78xx – Robust Reinforced ISO High-Immunity, 5700 VRMS “Reinforced” Digital Isolators, 100Mbps Features Benefits • Integrated SiO2 Dielectric Capacitor • Reinforced Isolation Rating • • • • 100 Mbps data rate supported Typ Prop Delay: 11 ns Max Ch-Ch Skew: 2.5ns, MAX Part-Part-Skew: <5ns Power: 1.7mA / channel typical (3.3V) • Immunity and Certifications • • • • CMTI: 100kV/µs typical (50kV/µs min) 5700 VRMS Isolation Rating (UL 1577) 12800 VPEAK Surge 1500 VRMS Working Voltage (DIN V VDE V 0884-10) • Power and Package • • • 2.25V to 5.5V Wide Supply Range SOIC -16W with 8 mm creepage / clearance SOIC – 16DWW with 14mm creepage / clearance (2015) • Unmatched reliability with 50% higher working voltage for 40 years barrier lifetime • Industry Leading Immunity • • • • 2x higher immunity to disruptive CMTI events Robust EMI for IEC61000-4-x ESD, EFT events Class A; High Conducted & Radiated RF immunity Glitch filters are not required. • Precision timing for low latency and high speeds • Pin to Pin with competitor SOIC 16-pin parts PART # Configuration TEMP oC DATA RATE ISO7842 2/2 -55 to 125 100 Mbps ISO7841 3/1 -55 to 125 100 Mbps Applications ISO7821 1/1 -55 to 125 100 Mbps • Industrial Automation ISO7840 4/0 -55 to 125 100 Mbps ISO783x 3/0, 2/1 -55 to 125 100 Mbps ISO7820 2/0 -55 to 125 100 Mbps ISO7810 1/0 -55 to 125 100 Mbps • • • • • • • PLC, Servo, Motor Control, Sensors Fieldbus – Modbus, Profibus, DeviceNet Data Buses, CAN, RS485 Motor Control Power Supplies Solar Inverters Medical Equipment Automotive – EV & HEV Q100 – Automotive Qualified 2015 Isolated Functions 5kVRMS ISO5852S ISO1050DW BUS VCC = 5V 1 Mbps SOIC-16W ISO3086T w/ Xfmr Driver BUS VCC = 5V 20 Mbps, SOIC-16W ISO3086 2.5kVRMS VDE Reinforced 2.5/5A w/ High CMTI & Miller Clamp, soft turn off ISO3088 BUS VCC = 5V 20 Mbps SOIC-16W BUS VCC = 5V 20 Mbps, SOIC-16W ISO3080 ISO3082 BUS VCC = 5V 200 Kbps SOIC-16W ISO5851 VDE Reinforced 2.5A w/ High CMTI & Miller Clamp ISO1176T ISO5452 w/ Xfmr Driver BUS VCC = 5V 40 Mbps SOIC-16W 2.5/5A w/ High CMTI & Miller Clamp, soft turn off ISO1541 ISO1176 Bi-directional Data Uni-directional Clk VCC = 3.3 - 5V, 1MHz SOIC-8N BUS VCC = 5V 40 Mbps SOIC-16W ISO5451 2.5A w/ High CMTI & Miller Clamp ISO5500 2.5A, VCC2= 15-30V DESAT, UVLO, SOIC-16W BUS VCC = 5V 200 Kbps 5V, SOIC-16W ISO35T ISO35 ISO15 BUS VCC = 3.3V 1 Mbps SOIC-16W BUS VCC = 3.3V 1 Mbps SOIC-16W Full Duplex Half Duplex Half Duplex RS-485 RS-485 Profibus Existing New Low Noise Xmer SOT-23 (6 pin) SN6501-Q1 Xmer drv: Auto qual 3.3V or 5V supply Idrive = 350mA (5V) SOT-23 (5 pin) SN6501 Transformer Driver 3.3V or 5V supply Idrive = 350mA (5V) SOT-23 (5 pin) ISO1540 ISO150 BUS VCC = 5V 1 Mbps SOP-8GW Bi-directional Data Bi-directional Clk VCC = 3.3 - 5V, 1MHz SOIC-8N 2-ch, Prog direction 80 MBd 1.5kV Isolation SO-28 CAN I2C ISO1050DUB w/ Xfmr Driver BUS VCC = 3.3V 1 Mbps SOIC-16W SN6505A/B Preview Roadmap IGBT GATE DRIVERS Others ISO1540 / ISO1541 Low-Power Bidirectional I2C Isolators • • • • • • Isolated Bidirectional I2C Communication Safety Certifications • 2.5kVrms per UL1577 • 4kVpk per DIN EN 60747-5-2 • CSA Uni- & Bidirectional Clock Options Fast Mode Plus (1 MHz) Operation ± 50 kV/s Typical Transient Immunity 4 kV ESD Protection on All Pins Extended Temp Range -40C to 125C 8-pin Narrow-body SOIC package • • • • • • • Isolated I2C, SMBus, PMBus Interfaces Open-drain Network Interfaces Power Over Ethernet Power Supplies Battery Management Motor Control Systems Level Shifting TI Information – Selective Disclosure ISO1541 ISO1540 Applications • • • • • • • Reduces Cost and Board Space Single & Multi-Master Applications Usable in Vast Majority of Applications Ease of Use Better reliability, immunity than competition Suitable for harsh Industrial Environments Industry Standard Footprint. Compatible with ADuM1250/1, Si8400/1 & Si8600/2 VCC1 1 SDA1 2 SCL1 3 GND1 4 Isolation • • Benefits 8 VCC2 VCC1 1 7 SDA2 SDA1 2 6 SCL2 SCL1 3 5 GND2 GND1 4 8 VCC2 Isolation Features 7 SDA2 6 SCL2 5 GND2 ISO5500 2.5A/ 6kVPK Isolated IGBT Driver with integrated safety features Features Benefits • Integrated SiO2 Dielectric Capacitor • Improved safety & system performance • Safety from hazardous voltages and equipment damage • Enabling error-free communication • High Immunity for Noisy Environments • High Reliability in Harsh Environments • Flexibility with Power Supplies • Certified by all 3 World Wide agencies • Footprint compatible with HCPL-316J • • DESAT protection – fault feedback, soft turn off, UVLO 200ns Propagation delay • • • • • • 4.2kVrms Isolation rating (UL 1577) 6kVpk Transient (DIN EIN 60747-5-2) 480Vrms Working Voltage CSA ±50kV/us CMTI 4kV ESD on all pins • • • 3V to 5.5V Transmitter Supply Voltage 15V to 30V Gate Drive Supply Voltage 16-pin Wide SOIC Package • Immunity and Certifications • Power and Package Applications • Industrial Motor Control • Industrial Inverters • HEV & EV power modules EVM ISO EVM - ISO55XX SN6501: Transformer Driver for Isolated Power Supplies • • • • • Transformer Driver for Small transformers Single 3.3V or 5V Supply High Current Drive: 350mA max (5V) Low Output Ripple Small 5-pin DBV Package • Interface Power Supply for CAN, RS-485, RS-422, RS-232, SPI, I2C, Low-Power LAN • Industrial Automation • Process Control • Medical Equipment • Provides the primary voltage for an isolation transformer and enables a small form factor, low EMI, high efficiency isolated power path • Reuse of the same device irrespective of supply • Ability to connect multiple devices to the secondary power supply • Permits Small Output Capacitors, space savings • Savings in board space: 40% smaller than competition Ethernet TI Information – Selective Disclosure 29 Networking: OSI 7 Layer Model OSI – Open Systems Interconnection • Layered, abstract description for communications & computer network protocol design. • Each layer gets information from the layer below and passes it to the layer above via a Protocol Data Unit (PDU) • The PDU is reformatted & repackaged in each layer with a specific “Data Unit” Data Link Layer = Ethernet MAC Physical Layer = Ethernet PHY (Transceivers) TI Information – Selective Disclosure Typical Application Circuit or FPGA OR TI Information – Selective Disclosure •EtherCATTM, Ethernet/IPTM, Ethernet POWERLINK, ProfiNETTM, SERCOSIIITM .. 10/100 Ethernet PHY Families DP83848 DP83620 DP83630/40 DP83849 Channels Single Single Single Dual Interface MII, RMII, SNI MII, RMII MII, RMII MII, RMII, SNI ESD HBM (kV) LED (#) Cable Length (m) 4 2 150 8 3 150 8 3 150 4 6 137 JTAG IEEE1149.1 Yes Yes Yes Yes Industry Gold Standard!! Drop-in to the DP83630 IEEE 1588 PTP (HW Time Stamp) Flexible Port Management Cable Diagnostics Fiber Support Cable Diagnostics Fiber Support Cable Diagnostic & Cable Length Detection 50MHz output clock for RMII 50MHz output clock for RMII Fiber Support Special Features 0 to 70 Operating Temperature Range (C) Pin/Package TI Information – Selective Disclosure -40 to 85 -40 to 105 -40 to 125 40WQFN & 48LQFP 0 to 70 -40 to 85 -40 to 85 -40 to 85 48QFN 48QFN/48LQFP 80 TQFP Key Difference DP83867xx 10/100/1000 Low Power and Robust Ethernet PHY for Industrial Applications • Highlights – – – – Exceeds IEC 8kV specifications! Lowest latency for both 100Mbps and 1Gbps modes, <400ns Power saving features: WoL, EEE (IEEE 802.3az) Lower power 1GbE solution, <400mW • Key Specifications – – – – – – GMII/RGMII/MII Start of Frame Detect for IEEE 1588 time stamp JTAG (IEEE 1149.1) 25MHz or 125MHz Output clock Pin to pin temperature grades (0 to 85C, -40C to 85C, -40C to 105C) QFP64 • Applications – Industrial: Automation, Test Equipment, Sensors – Communications: Debug /Management Port, Small Cell – Commercial: Network Printers, Broadband gateways TI Information – Selective Disclosure Thanks! Questions? TI Information – Selective Disclosure