12/24/240V Full HD LED TV/DVD/USB Combo
043169 (22")
Instruction Manual
Contents
Important Safety Instructions
What’s in the Box
TV Controls
Stand mount guide
TV Inputs and Outputs
5
6
7
7
SYSTEM CONNECTIONS
AV Input
PC Input
HDMI Input
YPbPr Component Input
COAXIAL Output
USB Input
Antenna Connection
8
8
9
9
10
10
11
Remote Control
12-14
OSD MENU OPERATION
Source Selection
Picture
Sound
Channel
Feature
Setup
EPG
PVR
Auto Installation
15
16-17
18-19
20-24
25-27
28-29
30-33
33
34-37
MEDIA OPERATION
Photo
Music
Mocie
E-Book
38-39
40-42
43
43
Built-in DVD Player Operation
Cleaning and Maintenance
Troubleshooting
Specifications
44-49
50
51-52
53
1
Important Safety Instructions
reference, along with the warranty card, purchase receipt and carton. The safety
correctly adhered to.
56cm (22")
Important Safety Instructions (cont)
Usage conditions and restrictions
• Follow the instructions in this manual when installing and adjusting the TV set.
Only adjust those controls that are covered in this instruction manual; improper
adjustment of other controls may result in damage. If this happens, unplug the TV
and have it serviced by appropriately qualified personnel.
• Do not change or modify the TV set in any way. Only use the attachments/
accessories specified.
• Do not cover the ventilation openings with items such as newspapers, tablecloths,
curtains etc., as this could impede ventilation.
• Do not insert any objects of any kind into this unit through the ventilation slots or
DVD slot, as they could touch the current-carrying parts or short-circuit parts,
resulting in fire, electric shock or damage to the unit.
• Do not touch the screen with fingers, as this may scratch or smudge the TV screen.
Full HD LED TV
Part Number: 043169
INPUT DC 12V
Max 3A 36W
June 2015
• Before installing this TV set, make sure your outlet voltage corresponds to the
voltage stated on the appliance rating label of the power adaptor being used..
• Only use this TV with the power adaptors supplied. If either plug does not
fit into your outlets, consult your dealer or an RV service center for
• Do not overload the power outlet.
• CAUTION
the power supply cord, plug and antenna cable to rain or moisture; do not use it
anywhere near water; do not touch the power plug with wet hands.
• Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
• Do not allow anything to rest on or roll over the power cord and antenna cable.
Protect the cord and run all cables so that no one steps on or trips over them.
• Do not run the cord near heat-producing appliances such as radiators, stoves or
irons. The excessive heat could melt the insulation and expose live wires.
• When not in use, disconnect the power cord from the outlet. Hold the plug, not
the cord, when disconnecting the unit. Pulling the cord can damage the internal
wires and may cause a fire.
• Never touch the TV screen, antenna or cord during thunderstorms. Stop use
during thunderstorms; unplug the unit when a thunderstorm is approaching.
2
• Do not expose the batteries to excessive heat such as sunshine, fire or the like.
• Unplug the TV set in all of the following circumstances:
• If it has been subject to impact or has been dropped and is damaged.
• If its voltage adaptor plugs, or the wall socket, are damaged.
• The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Young children should be supervised to ensure they do not play with the TV.
Position
• If a television is not positioned in a sufficiently stable location, when stand
mounted, it can potentially be hazardous if it falls. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
• Using cabinets, shelves or stands that provide a sturdy support for the TV and are
not in areas where the TV can be accidently knocked or bumped .
• Only using furniture that can safely support the television.
• Ensuring the TV is not overhanging the edge of the supporting furniture.
• Not placing the TV on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the TV to a suitable support.
• Not standing the TV on cloth or other materials placed between the TV and
supporting furniture.
• Educating children about the dangers of climbing up to reach the TV controls.
3
Important Safety Instructions (cont)
• When deciding where to put the TV set, make sure the location is:
• Well ventilated. Leave at least a 20cm space all around the TV set for good
ventilation.
• Protected from overheating and away from direct sunlight.
• Away from damp and cold.
• Away from areas with extremes of temperature (below 0°C or exceeding 40°C)
or moisture.
• Away from moisture drips or splashes.
• Protected from excessive dust.
• Do not install this equipment in a confined space such as a bookcase or similar.
• Do not put any objects filled with liquids, such as vases, on top of the TV set.
• Do not place any naked flame sources, such as lighted candles, on top of the TV.
What’s in the Box
Column bracket
22" TV with inbuilt DVD Player
12/24/240V FHD LED TV/DVD/USB Combo
Remote Control
043169(22")
Instruction Manual
Manual
4 Screws
4 Screws
4
5
TV Controls
Stand mount guide
Screw hole A
Screws
TV Controls
1. VOL(+) - This button increases the TV’s volume. If the OSD menu is active, pressing this button will
move the selection to the right.
2. VOL(-) - This button decreases the TV’s volume. If the On Screen Display(OSD) menu is active,
pressing this button will move the selection to the left.
3. CH(+) - This button performs the channel up function. If the OSD menu is active, this button functions
as up control for the menu.
4. CH(-) - This button performs the channel down function. If the OSD menu is active, this button
functions as down control for the menu.
6. MENU - This button activates the OSD menu. If a sub-menu is active, pressing this button will return
the selection to the previous menu level.
5. SOURCE - This button switches between all the different sources of the TV. When the OSD is active,
this button acts as the enter button and confirms the menu selection.
7.
After you load a disc, press
to play the disc, and press
twice to pause.
8.
Press the button when the power is on the disc will eject, Press the button again to load the
disc automatically.
9. POWER( ) - Turn on the TV by pressing the button once. Press the button again to turn off the TV.
Screw hole B
Screw hole C
Screw hole D
Screws
Instructions:
1. Place the TV unit on a flat and clean surface.
2. Attach stand mount using 4 screws through holes B into A.
3. Place the base on to the mount with the supplied screws
through holes D into C.
TV Inputs & Outputs
Rear Bottom
EARPHONE
OUT
DC 12V
1
100
100
four
6
VIDEO
2
PC
AUDIO
IN
VGA
HDMI
IN
3
4
5
6
L
R
Rear Side
COAXIAL
OUT
RF
IN
USB
7
8
9
Y
Pb
Pr
IN
10
1.
2.
3.
4.
5.
6.
7.
8.
POWER: (DC 12V) input
Earphone out: Output for headphones or head units such as RV Media Head Units with TV input.
AV Inputs: Composite Video & Audio (A/V) in.
PC Audio Input: Connect to the audio output jack on a computer.
VGA Input: Connect to a computer’s VGA output jack.
HDMI Input: HDMI in.
COAXIAL Out: Digital Audio output for Surround Sound amplifiers and other devices.
RF Input: Connect to an external antenna to receive ATV/DTV TV signals
in ATV/DTV modes.
9. USB: USB/Multimedia input.
10. Y/Pb/Pr Input: Component Video in.
7
System Connection
System Connection
3. HDMI INPUT
HDMI input: Use the SOURCE button on the remote control to select HDMI.
NOTE: Please, make sure the inputs and outputs have firm connections before
connecting power.
1. COMPOSITE A/V INPUT
Audio/video input: Use the SOURCE button to select AV on the remote control.
Pr
IN
Pb
Y
IN
Y
Pb
Pr
Source eg. Blu-ray, DVD, Satellite, camcorder etc
USB
USB
HDMI 1
DC 12V
EARPHONE
OUT
VIDEO
L
R
IN
PC
AUDIO
IN
VGA
RF
IN
COAXIAL
OUT
COAXIAL
OUT
RF
IN
Video Cable Red/White/Yellow (Not supplied)
DC 12V
HDMI
EARPHONE
OUT
VIDEO
L
R
IN
2. PC INPUT
PC input: Use the SOURCE button on the remote control to select PC.
PC
AUDIO
IN
VGA
HDMI
IN
Pb
Pb
VGA OUTPUT
IN
Pr
Pr
4. YPbPr COMPONENT INPUT
Video component input: Use the SOURCE button on the remote control to select YPbPr.
This input consists of both Video (Green/Blue/Red) and Audio (Red/White)
VGA OUTPUT
Pb
Pr
USB
USB
Y
Y
Y
COAXIAL
OUT
COAXIAL
OUT
RF
IN
RF
IN
PC AUDIO
OUTPUT
DC 12V
EARPHONE
OUT
DC 12V
VIDEO
L
R
IN
8
PC
AUDIO
IN
VGA
HDMI
EARPHONE
OUT
VIDEO
L
IN
9
R
PC
AUDIO
IN
VGA
HDMI
System Connection
System Connection
5. COAXIAL OUTPUT
Allows connection of Digital audio systems and Surround Sound.
7. Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
.connected to the antenna jack directly
IN
Y
Pb
Pr
Antenna lead with 75 ohm male PAL Connector
75ohm coaxial cable
COAXIAL
RF
IN
USB
Antenna cable
COAXIAL
OUT
COAXIAL Cable (Not supplied)
Remote Control
Installing Batteries
DC 12V
EARPHONE
OUT
VIDEO
L
R
IN
PC
AUDIO
IN
VGA
1
HDMI
Open the battery compartment
cover on the back of the remote.
Battery
6. USB INPUT
Use the SOURCE button on the remote controller to select Media.
Cover
Insert two 1.5V AAA size batteries
using the correct polarity as shown.
.Don’t mix old or used batteries with
.new ones.
IN
2 x size AAA 1.5V
Y
Pb
Pr
2
To use the remote control, point
it towards the remote sensor at
the front of the television. The
remote control has a range of up
to approximately seven meters
from the TV at an angle of up to
60 degrees.
USB memory
Replace the cover.
USB
3
COAXIAL
OUT
RF
IN
Battery
Cover
DC 12V
EARPHONE
OUT
VIDEO
L
R
IN
10
PC
AUDIO
IN
VGA
- Batteries should not be exposed to excessive heat such as direct
sunlight, fire or the like.
- If not being used for a period of time, please remove the batteries
from the remote in case of leakage.
- Do not mix old & new batteries together.
HDMI
11
Remote-Control Unit
POWER
MUTE
2
1
No.
Button
1
POWER
2
MUTE
3
0‐9
4
SLEEP
4
SLEEP
6
P.MODE
9
DISPLAY
S.MODE
AUTO
SOURCE
11
AUTO
DISPLAY
Use for adjustments in PC mode.
Press to display the source and channel info.
SOURCE
Press to select signal the source for the TV.
Allows you to navigate the on screen menus (OSD).
Exit from the current menu or sub‐menu.
Allows you to navigate the on‐screen menus and adjust the
system settings to your preference.
MENU
EXIT
I/II
AUDIO
20
ASPECT
I/II
21
EXIT
15
12
17
16
ASPECT
D.MENU SETUP
29
30
33
34
37
38/45
41
42/48
Select the sound mode.
19
MENU
FAV
7
8
OK
CH+/‐
VOL+/‐
QT
AUDIO
QT
21/25
22/26
Select the picture mode.
14
15
16
17
18
OK
EPG
SUBTITLE REVEAL
D.DISP
TIME SHIFT REC.MENU
TEXT
INDEX TV/RADIO CANCEL
REC
MIX
A-B
SIZE
HOLD
REPEAT
12
SUBPAGE
18/19
20
23/27
32
31
36
35
40/47
39/46
44/50
43/49
24/28
Set the delay time for the TV to turn off automatically.
P.MODE
13
13
14
Press 0‐9 to select a TV channel directly. The cannel will
change after 2 seconds.
S.MODE
10
11
12
8
7
10
Press to mute the sound. Press again to regain sound.
6
9
5
Turns the TV on or off to standby mode.
Return to the previously viewed program.
5
3
Description
22
D.MENU
23
SETUP
24
D.DISP
25
R (DELETE)
26
G (RENAME)
27
Y (MOVE)
28
29
30
31
32
33
34
35
36
37
38
B (SKIP)
FAV
EPG
TIME SHIFT
REC.MENU
SUBTITLE
REVEAL
TEXT
REC/
INDEX
TV/RADIO
Select the option.
Press these two buttons to change channels up/down.
Press these two buttons to increase/decrease the volume.
Quick Tune. Quick TV Channel Autotune Button.
Press to change the DTV or DVD audio language.
Select NICAM audio mode.
Only be available for TV programmers with NICAM transmission,
and default mode is mono.
Press this button to select the aspect ratio of the screen.
Eject/insert disc.
Quick Teletext navigation or setup settings / DVD: Video
DVD Menu button.
DVD system setup.
Quick navigation during Teletext or setup settings / DVD: DVD
Information button.
Delete function button.
Rename function button.
Move function button.
Skip function button.
Selects favorite channel(s).
Press to display EPG (Electronic Program Guide).
Press to switch to TIME SHIFT mode.
Press to switch to REC.MENU immediately (DTV only).
Press to select the subtitle language.
Shows hidden words or pages by Teletext.
Switch on/off of Teletext window.
Press to record the program immediately.
Returns to Index page by Teletext.
Press to switch between DTV and radio programs
13
No.
Button
Description
39
CANCEL
Switches the Teletext window to the background; only the
current page no is visible.
40
MIX
41
42
REPEAT
43
HOLD
SUBPAGE
44
SIZE
Sets the transparency of Teletext window.
DVD: Repeat mode selection.
Zoom In or Out of the Teletext window.
Holds on the current Teletext page.
Displays a sup‐page of upper Teletext options.
OSD Menu Operation
Source Selection
Input
DTV
Press SOURCE button to display the input source list.
Press the ▼/▲ buttons to select the input source you want
to watch,
Press the OK button to select the input source.
ATV
AV
45
Play and Pause Media‐Player / DVD.
YPbPr
46
Fast Rewind Media‐Player and DVD.
HDMI
47
48
Fast Forward Media‐Player and DVD.
Stops playback Media‐Player and DVD.
49
Plays the previous Media Player or DVD file/chapter.
50
Plays the next Media Player or DVD file/chapter..
PC
Media
DVD
Main Menu
Press MENU button to display the MAIN OSD MENU.
Press ▼/▲ buttons to select the sub MENU that you want.
Press ENTER button or ► button to enter the sub menu, and press ◄ button to return back
to the previous menu.
Press ▼/▲ buttons to select an option in the submenu and then press ENTER button or ►
button to select the option. Press ◄ / ► buttons to adjust the value or press ▼/▲ buttons to
select drop down options.
You can press MENU button to save and return back to the previous menu, and press
EXIT button to exit the entire menu.s
14
15
OSD Menu Operation
OSD Menu Operation
Picture Menu
Press ▲/▼ buttons to select the option that you want to adjust in the Picture menu,
and then press ENTER button or ► button to select..
Press ◄/► buttons to adjust or press ▲/▼ button to select. And press ENTER button
or ► button to select the sub menu.
After finishing your adjustment, press MENU button to save and return back to the
previous menu, and press EXIT button to exit the entire menu..
Press TV MENU button to display the main menu.
Press ▼/▲ buttons to select Picture in the main menu,
then press ENTER button or ► button to select.
Brightness
Press ▲/▼ buttons to select Brightness, then press ENTER button or ► button to
enter and press ◄/► buttons to adjust. Then press MENU button to return back
the previous menu.
Contrast
Press ▲/▼ buttons to select Contrast, then press ENTER button or ► button to enter
and press ◄/► buttons to adjust. Then press MENU button to return back the previous
menu.
Sharpness
Press ▲/▼ button to select Sharpness, then press ENTER button or ► button to enter
and press ◄/► buttons to adjust. Then press MENU button to return back the previous
menu directly.
Colour
Press ▲/▼ button to select Colour, then press ENTER button or ► button to enter
and press ◄/► buttons to adjust. Then press MENU button to return back the previous
menu directly.
Tint
Press ▼/▲ buttons to select Tint, then press ENTER button or ►button to enter and
press◄ / ►buttons to adjust.
Colour Temperature
Press ▲/▼ buttons to select Colour Temperature, then press ENTER button or ►
button to enter and ▲/▼ button to select Standard, Cool, Warm.
Aspect Ratio
Press ▲/▼ button to select Aspect Ratio, then press ENTER button or ► button
to highlight and ▲/▼ button to select Auto,4:3,16:9,Zoom1,Zoom2 or Panorama.
16
17
OSD Menu Operation
OSD Menu Operation
Sound Menu
Surround
Press ▲/▼ button to select Surround, then press ENTER or ► button to enter and press
▲/▼button to select ON or OFF. Turning this setting ON can also be useful in increasing the
TV’s overall volume level.
Press MENU button to display the main menu..
Press ▲/▼ buttons to select Sound in the main menu, then press ENTER button
or ► button to select.
AVL - Auto Volume
This function when turned on will help even out the volume level between different A/V
sources so one is not greatly louder than another. It can also help reduce the volume of
loud TV ads compared to TV shows, although could lower the overall volume of the TV.
The result depends greatly on the A/V source so this function is set by default to off.
Press ▲/▼ button to select AVL, then press ENTER or ► button to enter and press ▲/▼
button to select ON or OFF.
SPDIF
Press ▲/▼ button to select SPDIF, then press ENTER or ► button to enter and press ▲/▼
button to select .
(Available SPDIF modes: Off, PCM, Bitstream)
Then press ENTER button or ► button to enter and press ◄/► buttons to adjust, then
press MENU button to return back the previous menu.
Press ▲/▼ buttons to select the option that you want to adjust in the Sound menu, then
press ENTER button or ► button to enter..
Press ◄/► buttons to adjust or press ▲/▼ to select, and press ENTER or ► button to
return to the submenu..
After finishing your adjustment, Press MENU button to save and return back to the
previous menu, or press EXIT button to exit the entire menu.
Audio Description
Press ▲/▼ buttons to select Audio Description, then press ENTER or ► button to enter and
press ▲/▼buttons to select ON or OFF.
Sound Mode
Press ▲/▼ buttons to select Sound Mode, and then press ENTER or ► button to enter.
Then press ▲/▼ buttons to select. (Available Sound mode: Bass, Treble, EQ, Balance).
You can change the value of bass and treble, Balance and EQ, when the sound is in
User mode.
TIP: You can press S-MODE button on the remote control to change the Sound Mode
directly..
Bass
Press ▲/▼ buttons to select Bass, then press ENTER or ► button to enter and press
◄/► buttons to adjust. Then press MENU button to return back the previous menu.
Treble
Press ▲/▼ buttons to select Treble, then press ENTER or ► button to enter and press
◄/► buttons to adjust. Then press MENU button to return back the previous menu.
Balance
Press ▲/▼ buttons to select Balance, then press ENTER or ► button to enter and press
◄/► buttons to adjust. Then press MENU button to return back the previous menu.
18
19
OSD Menu Operation
OSD Menu Operation
Channel Menu
Press the RED button to set the current channel to lock, if the current channel already
locked, press the RED button again cancel the lock.
Press the GREEN button to delete the current channel.
Press the YELLOW button to skip the current channel, if the current channel already
skipped, press the YELLOW button again to cancel the skip function.
Press the BLUE button to swap the channel position.
If one of the channel has been incorrectly placed in the station listing, you may move it to
the current position you want using the ▲/▼ keys. Select the channel to be moved, press the
BLUE button, move the channel to the new location and press the ENTER button or the
BLUE button, this will move the station to the new location.
If there is a delete channel icon, press the MENU button or the ENTER button. The following
notification will appear:
Press MENU button to display the main menu.
Press ▲/▼ buttons to select Channel in the main menu, then press ENTER button
or ► button to enter.
1. Press ▲/▼ buttons to select the option that you want to adjust in the Channel menu,
then press ENTER or ► button to enter.
2. Press ▲/▼ buttons to select and press ENTER or ► button to select the sub menu.
3. After finishing your adjustment, press MENU button to save and return back to the
previous menu, or press EXIT button to exit the entire menu.
Press ◄ to choose OK, or press ► to cancel, press ENTER to confirm.
Channel Management
Press ▲/▼ buttons to select Channel Management, then press ENTER or ► button to enter.
20
21
OSD Menu Operation
OSD Menu Operation
Press ▲/▼ buttons to select the channel, then press ENTER to open the rename channel menu.
Favorites Manager
Press ▲/▼ buttons to select Favorite Manager, then press ENTER or ► button to enter.
Press the RED button to enter a space.
Press the GREEN button to change case,
Press ▲/▼ or ▲/▼ buttons to select the character, and then press ENTER to confirm.
Press the YELLOW button to delete the previous character.
Press the BLUE button to save the change and return to the previous page.
Press the EXIT button and the menu will appear as follows:
Select “Cancel” to exit the entire menu without changes.
Select “OK” to save the changes and the following notification will be displayed:
22
Press ▲/▼ buttons to select Channel, press the RED button to set to Fav1.
Press ▲/▼ buttons to select Channel, press the GREEN button to set to Fav2.
Press ▲/▼ buttons to select Channel, press the YELLOW button to set to Fav3.
Press ▲/▼ buttons to select Channel, press the BLUE button to set to Fav4.
If the current channel already be one of your favorite channels, press the RED/ GREEN/
YELLOW/ BLUE button again will set it to a normal channel.
Press the MENU button or EXIT button and the successfully updated menu will appear.
Country
Press ENTER button or ► button to enter, then Press ▲/▼ button to select the appropriate
country, and press ENTER or ► button to confirm.
TV Connection
The default setting for this mode is “AIR”. This setting does not need to be changed for RV
operation in Australia.
Channel Auto Search
Press ▲/▼ button to select TV Channel Auto Search, then press ENTER or ► button to enter
(When the System Lock is on, please input the default password “0000”).
23
OSD Menu Operation
Auto Search - cont’d
Press ▲/▼ buttons to select All, Digital or Analogue, then press ENTER or ► button to select.
OSD Menu Operation
Feature Menu
Press MENU button to display the main menu.
Press ▲/▼ button to select Feature in the main menu, then press ENTER or ► to enter.
Press ENTER to Auto Search the selected channels, otherwise select CANCEL.
NOTE: For most applications in Australia, only DTV channels are used for regular TV
broadcasts.
PVR/Timeshift
1. Press ▲/▼ buttons to select the option that you want to adjust in the Feature menu,
then press ENTER or ► button to enter.
2. Press ◄/►buttons to adjust or press ▲/▼button to select.
3. After finishing your adjustment, press MENU button to save and return back to the
previous menu and press EXIT button to exit the entire menu.
Child Lock
Press ▲/▼ buttons to select Child Lock, then press ENTER or ► button to enter.
(Please enter the default password “0000”)
When auto search finished, a “Save Successful” will appear to confirm the Auto Search
function has completed.
24
25
OSD Menu Operation
OSD Menu Operation
Lock Channel
This enables Parental Guidance to be activated and the TV’s Password to be changed.
Press ▲/▼ buttons to select Child Channel, then press ◄/► key to select off or on.
Then press ENTER or ► button to confirm.
Parental Guidance
Press ▲/▼ buttons to select Parental Rating, then press ENTER or ► button to enter the
sub menu. Then press ▲/▼ button to select the highest allowed program rating.
Then press ENTER or ► button to confirm.
Change Pin Code
Press ▲/▼ buttons to select Change Pin Code, then press ENTER or ► button to enter and
the Change Pin Code menu will appear as follows:
OSD Language
Press ▲/▼ buttons to select OSD Language, then press ENTER or ► button to enter the
sub menu, then press ▲/▼ buttons to select, then press ENTER or ► button to confirm.
Preferred Subtitle (Language)
Press ▲/▼ buttons to select Preferred Subtitle, then press ENTER or ► button to enter
the sub menu, then Press ▲/▼ buttons to select, then press ENTER or ► button to confirm.
Preferred Audio (Language)
Press ▲/▼ buttons to select Preferred Audio, press ENTER or ► button to enter the sub
menu, then press ▲/▼ buttons to select, then press ENTER or ► button to confirm.
Digital Teletext Language (DTV)
Press ▲/▼ buttons to select Digital Teletext language, then press ENTER or ► button to
enter the sub menu, then Press ▲/▼ buttons to select, then press ENTER or ► button to
confirm.
Analog Teletext Language (ATV)
Press ▲/▼ buttons to select Analog Teletext language, then press ENTER or ► button
to enter the sub menu, then Press ▲/▼ buttons to select, then press ENTER or ► button
to confirm.
Enter the old password at (if the old password is incorrect, “Invalid
Password” will be displayed). Then enter the new password. Finally, enter the new password
again to confirm the new password.
If successful, a notification will be displayed to confirm this.
Language
Press ▲/▼ button to select Language, then press ENTER or ► button to enter the sub menu.
Clock
Press ▲/▼ buttons to select Clock, then press ENTER or ► button to enter the sub menu,
By default the clock information is supplied by DTV data. Press ▲/▼ buttons to select your
time zone, then press ENTER or ► button to confirm. If you want to manually adjust the
clock settings, first change “DST” to “OFF” then manually adjust the other clock settings.
Sleep (Timer)
Press ▲/▼ buttons to select Sleep, then press ENTER or ► button to select and press
▲/▼ buttons to select the desired time for the TV to automatically turn off.
Auto Power Off
Press ▲/▼ buttons to Auto Power Off, then press ENTER or ► button to enter and press
▲/▼ buttons to select the desired time of no activity (eg if you do not change the TV channel
or adjust the volume for the selected time).
Hearing Impaired
Offers additional information and subtitles on selected programmes. Press ▲/▼ buttons to
select Hearing Impaired, then press ENTER or ► button to enter and press ▲/▼ buttons
to select ON or OFF.
26
27
OSD Menu Operation
OSD Menu Operation
Setup Menu
PVR/Timeshift
Press MENU button to display the main menu.
Press ▲/▼ button to select Setup in the main menu, then press ENTER or ► to enter.
Press MENU button to display the main menu. Press ▲/▼ buttons to select PVR/Timeshift in
the main menu, then press ENTER or ► to enter.
PC Setup
Blue Screen
Home Mode
Reset TV Setting
Software Upgrade
1. Press ▲/▼ buttons to select the option that you want to adjust in the Setup menu, then
press ENTER or ► button to select.
2. Press ◄/►buttons to adjust or press ▲/▼button to select.
3. After finishing your adjustment(s), press MENU button to save and return back to the
previous menu and press EXIT button to exit the entire menu.
OSD Timer
Press ▲/▼ buttons to select OSD Timer which controls how long the OSD menus will be
displayed, then press ENTER or ► button to enter the sub menu, then Press ▲/▼ buttons to
select. (OSD Timer options: 5 Second, 10 Second, 15 Second, 20 Second, 25 Second, 30
Second, never), then press ENTER or ► button to confirm.
PC Setup
Press ▲/▼ buttons to select PC Setup, then press ENTER or ► to enter the sub menu,
Then Press ► to enter, then press ENTER or ► to confirm (when a PC signal is connected).
Blue
Press ▲/▼ buttons to select Blue screen when there is no input source, then press ENTER
or ► to enter the sub menu, then Press ▲/▼ to select On or Off. Press ENTER or ► to confirm.
Home Mode (Picture Mode)
Press ▲/▼ buttons to select OSD Timer, then press ENTER or ► button to enter the sub
menu, Then Press ▲/▼ buttons to select. (Home, Dynamic, Standard, Mild.), then press
ENTER or ► button to confirm.
Reset TV Setting
To reset the TV to its fatory settings, press ▲/▼ buttons to select Reset TV Setting, and then
press ENTER or ► to select. The password menu will appear when the Child Lock is on.
Software Upgrade
Caution - this function is only to be used with Software supplied for use with this RV Media
TV by Camec. Load the supplied software on to the root directory of an empty USB drive and
plug it into the TV ‘s USB interface then press the ENTER key to upgrade. Do not turn the TV
off during the upgrade process. The TV will restart when the upgrade process has completed..
28
Partition Select
This function is not necessarily required but you have the ability to use partitions on your
USB drive for the PVR (Personal Video Recorder) function. Press the ▲/▼ buttons to select
Partition Select, then press ENTER or ► button to enter the sub menu, then Press ▲/▼
buttons to select the partition you want to use and press the GREEN button to set the
highlighted partition as default. This will restrict PVR recordings to the selected partition.
Auto Timeshift
Press ▲/▼ button to select Auto Timeshift, then press ENTER or ► to enter the sub menu,
then Press ▲/▼ to select On or Off.
Timeshift Buffer
This sets the period of time the Time Shift function con work for. This also depends on the
available space on the USB drive. Press ▲/▼ buttons to select Timeshift Buffer, then press
the ENTER or ► button to open the sub menu, then Press ▲/▼ buttons to select between:
auto, 30Mins, 1Hr & 2Hr.
Timer (Manual Recording)
Use the Timer function to set up timer DTV recording. Press ▲/▼ button to select Timer,
then press ENTER or ► button to enter the sub menu, then Press ▲/▼ buttons to select and
use the following functions. Recorder - Turn the record function on/off; Channel - select the
channel you want to record; Start Time - set the start time to record; Duration - set the
record duration; Date - set the record date; Mode - select the record mode.
Record List
Press ▲/▼ button to view the program Record List, then press ENTER or ► button to enter
the sub menu, then Press ▲/▼ buttons to select.
Recorder Start
Press ▲/▼ buttons to select Recorder Start, then press ENTER or ► button to enter the sub
menu, then Press ▲/▼ buttons to select.
29
OSD Menu Operation
OSD Menu Operation
Channel List
Press the LIST button on the remote control to display the channel list menu.
Subtitle
Press the subtitle button on the remote control and subtitle menu will appear as follows:
Press ◄/► buttons to turn OFF, then press the ENTER button to turn off subtitles.
Press ▲/▼ buttons to you select ENG, then press the ENTER button to display subtitles in
English. Press EXIT to exit.
Press ▲/▼ button to select channel that you want to view, then press ENTER to view.
EPG (ELECTRONIC PROGRAM GUIDE)
FAV List
Press the FAV button on the remote control to display the Favorite List menu..
Press the EPG button on the remote control to display the EPG daily view.
Press ▲/▼ buttons to select channel that you want to view, then press the ENTER button to
view the channel.
Press ◄/► buttons to switch between Favorite 1, Favorite 2, Favorite 3 and Favorite 4.
30
31
OSD Menu Operation
OSD Menu Operation
1. The display shows the current channel No. and channel name.
2. The display shows the program’s start and finish time plus program name.
3. The display shows the current date and time.
Press ▲/▼ buttons to select the channel or program.
Press ◄/► buttons to select the channel program.
Press the RED the button to switch between EPG weekly mode and EPG daily mode.
Press ◄/► buttons to select the audio language format - (available audio format: right,
stereo, left). Press ▲/▼ buttons to change the setting.
PVR Function (DTV Only)
Press ● on the remote control to record the current programme when DTV is selected as the
current Source. NOTE you must have a USB drive inserted in TV. If the USB drive is not fast
enough to record on, the following message will be displayed:
3
1
2
It is advisable to try another USB drive but you can select “OK” to continue with the current
drive.Press on the remote control to start recording which will display the following dialog:
Select “Yes” to start recording. The following dialog will be displayed:
To view programs from the previous day or further back, press the YELLOW button to
move to an earlier date.
To view programs for the next day or further on, press the BLUE button increase the date.
For more information about a particular program, press INFO.
Press the GREEN button once to add the selected channel to the record list.
Press the GREEN button twice to set a Reminder for the program, which will display a small
icon beside the selected program.
Press EPG once more or EXIT once to cancel the operation.
TEXT
Press the TT/CC button on the remote control to display the text/closed captions; press the
TT/CC button on the remote control again to stop the display.
Multi-Audio
Press AUDIO button on the remote control to display the multi-audio menu if available.
While Recording is in progress, a small dialog box will be displayed on the left of screen:
Press ● on the remote control again to set the Record duration time.
Rec Duration Time
Press
00:00
on the remote control to stop recording.
To stop recording select “Yes”; to continue recording select “No”.
32
33
OSD Menu Operation
OSD Menu Operation
Auto Installation
Step 3: Set the Language
Note: Australia is set as the default country
If you are turning on the TV for the first time and there are no TV stations stored on the TV,
the “Auto Installation” menu will appear on the screen.
There are 5 steps as follows:
Step 1: Set Home Mode (Picture Mode)
Step 4: Set Auto Power Off
Note: The default setting is “Off”.
Step 2: Set the Country
Note: Australia is set as the default country.
34
35
OSD Menu Operation
OSD Menu Operation
Step 5: Set up the TV Connection
The default connection for this TV is “Air”.
Step 6: Set up the Auto Search
Only DTV is required for most applications in Australia.
36
37
Media Operation
Media Operation
Press the “MEDIA” button on the remote control to access this menu. You can also access
this menu by selecting “MEDIA” as a Source on the remote Control.
Press the ◄ / ► buttons to select Photo/Music/Movie/Text , and then press ENTER button
to select. NOTE: A USB device must be inserted to use these functions.
Thumbnails
Thumbnails mode can be only be used in photo mode and is highlighted in file browser by
pressing “EXIT” → “Right（► )” as follows:
Photo
Formats Supported: JPG,JPEG/Progressive JPEG, BMP & PNG
Function Introduction
Press the INFO button to see the file info of the current photo being viewed then press the
button to play or pause. You can view the playback status on the right of screen.
Press ▼/▲ or ◄ / ► buttons to rotate the picture.
Note: Other menu options and descriptions are the same as for Movie menu.
Playback
Press the "PLAY" key to start photo slide show playback.
Key Operation
: Same as "PLAY" button on the remote, to start playing pictures in slide show mode.
: Same as "PAUSE" button on the remote, to pause the file being played.
: Same as "STOP" button on the remote, to stop the slide show and return to file browser.
: Same as "|<<" / ">>|" buttons the on remote, to directly play the previous or next file.
: Rotate the picture being viewed (0 º、90 º、180 º、270º).
: Zoom in on the current picture.
: Same as the "INFO" key on remote, to display the current file’s information.
: Opens the “Photo Setup” menu which includes “Repeat Mode”, “Background Music”,
“Music Source”,”Slide Time”, “Effect”.
: Press to view the play list menu.
38
39
Media Operation
Media Operation
Music
Formats Supported
Movie
Formats Supported
MUSIC
LPCM
ADPCM
WMA STD
WMA Prof
AAC-LC / HE-AAC
AC3
E-AC3
MP1
MP2
MP3
AAC-LC
HE-AAC
Cook
Vorbis
FLAC
WAVE
WMA
AAC
AC3
MPEG
Read Audio
Ogg
FLAC
Press ▼/▲ buttons to select the Song you want to listen to, then press the ENTER button
or button or button to play.
Press the button to return back to the previous menu .
Type
MOVIE
Container
AVI
MPEG-4 SP
MJPEG
MPEG 1/2
MPEG4
WMV
RealMedia
40
Video Decoder
MPEG-4 ASP
H.264
DivX
Xvid
WMV 9 / VC - 1
MPEG-1 Video
MPEG-2 Video
MPEG-2 Video
MPEG-4 ASP
H.264
Xvid
MJPEG
WMV 9 / VC-1
RV30 / RV40
Flash
Sorenson H.263
H.264
QuickTime
MPEG-4 ASP
H.264
MJPEG
41
Media Operation
Media Operation
Movie
QuickTime
ASF
Matroska
Video
DivX
TS Stream
MPEG-4 ASP
H.264
MJPEG
WMV3 / WVC1
MP4S / M4S2
MPEG-2 Video
MPEG-4 ASP
H.264
Xvid
DivX
DivX Plus HD
RV30 / RV40
WMV9 / VC-1
MPEG-4 ASP
DivX
Xvid
MPEG-2 Video
H.264
WMV 9 / VC-1
Press ▼/▲ button to select the folder that you want to view on the USB drive.
Press the ENTER button to select a sub folder if required.
Press the
button to play,
Press the button or EXIT button to stop playing.
Press the button to return back to previous page.
The first few seconds of the selected media will be shown in the video window.
E-Book
Press the ◄ / ►buttons to select E-Book Manager in the main menu,
then press the ENTER button to open.
Press the EXIT button to return back to the previous menu .
Press ▼/▲ to select the file, then press the ENTER or
42
43
button to view
Built-in DVD Player Operation
44
Built-in DVD Player Operation (Cont.)
45
Built-in DVD Player Operation (Cont.)
Built-in DVD Player Operation (Cont.)
INITIAL SETTINGS (DVD)
- - Preference Page - -
- - General Setup Page - -
TV Type
NTSC
Audio
Eng
TV Display
Wide
Subtitle
Eng
OSD Lang
Eng
Disc Menu
Eng
Captions
Off
Parental
Last Memory
Off
Password
Default
Go To Preference Page
1. TV DISPLAY: Sets the screen ratio
options are: Normal/PS (4:3 Pan Scan),
Nomal/PS (4:3 Letter Box) and Wide
(16:9). The default setting is wide.
2. OSD Lang: Sets the OSD Language
options. The default is English.
1. TV Type: The DVD player supports
output of various systems including
Multi, NTSC, PAL. The default setting is
PAL and this should not need to be changed.
2. Audio: DVD language selection options.
3. Subtitle: This player can display DVD
3. CAPTION: Play captions on supported
subtitle languages if supported by the DVD
DVD titles, Options: ON/OFF.
disc. When playing DVD’s, you can hide the
subtitle or choose any of them as the current
4. LAST MEMORY: Play DVD from last
subtitle language.
playback point. Options are: ON/OFF.
4. Disc menu: DVD Disc menu language
selection options.
- - General Setup Page - Downmix
STR
Go To Speaker Setup Page
1. LT/RT: Logic Surround stereo
audio output. This matrix-based coding
process enables stereo audio tracks to
carry four channels (left, center, right
and surround) of audio data for
surround sound amplifiers.
5. PARENTAL: This function disables
playback of specific DVD’s which may be
unsuitable for children.
Some DVDs are encoded with specific rating
levels. lf the rating level of the disc is higher
than that preset in this menu, playback of the
disc will be prohibited.
After selecting one of the PARENTAL codes,
the screen will display the PASSWORD page.
The default password is “8888".
6. PASSWORD [DVD only]: Allows you to
change the current PASSWORD.
7. Default: This option will return the DVD
to it’s factory default settings.
2. Stereo: Analog stereo audio output.
The player sends the subwoofer and
speech signals to the TV’s speakers.
46
47
Built-in DVD Player Operation(Cont.)
Built-in DVD Player Operation(Cont.)
Title Search [DVD]
Press [GOTO], then press the number buttons to enter the desired title number.
Subtitle language [DVD]
If the DVD you are watching has subtitles, press [SUBTITLE] repeatedly during
playback until the desired subtitle language appears on the TV screen.
Example: SUBTITLE 01/03 ENG
Repeat Playback
Press [REPEAT] during playback to activate repeat mode:
NOTE: Not all discs support this function.
Chapter
Title
Audio soundtrack language (multilanguage) [DVD]
This function works only with discs that have multiple audio soundtrack
languages recorded.
Press [AUDIO] repeatedly during playback until the desired language appears
on the TV screen.
All
O?
NOTES:
 When the desired language is not selected, even though the button is
pressed, the language is not available on the disc.
 If the language is not recorded on the disc, only the available language on
the disc will be heard.
 When you turn off the power or change the disc, you have to select the
language again.
On-screen information
Press [DISPLAY] repeatedly to show the disc information available (Title,
Chapter, Title elapsed playing time, Language, etc.).
l
l l
Picture/JPEG CD playback
To start a slide show from the thumbnail pictures:
1. Press / / / to select the desired picture.
To go to the next or previous thumbnail pictures, press or .
2. Press [OK] or / (Play) to start the slide show from the selected picture.
During the slide show:
 PRESS to pause. Press
(Play) to continue.
 PRESS
or to skip to the next or previous file.
/ / / to
 If the picture appears upside down or sideways, press
flip/rotate the picture.
48
49
Cleaning and Maintenance
Troubleshooting
WARNING!
For your personal safety, be sure to disconnect the power adaptor before
proceeding with any maintenance or cleaning.
Cleaning the TV screen
• Do not touch the TV screen with sharp objects.
• Use a clean, soft cloth to wipe off any dust and fingerprints from the TV
screen surface. Wipe in a straight motion from the center of the TV panel to
the outside.
• Do not clean the screen with water or chemical cleaners, as this may
damage the TV screen surface.
• Never use chemicals such as household cleaning sprays, antistatic sprays or
fluids, benzene or thinner to clean the TV screen.
Cleaning the main unit
• Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.
• If necessary, wipe the outside of the unit with a clean, soft cloth, moistened
with lukewarm water.
• Do not use benzene, thinner or alcohol as these chemicals will smudge the
surface finish.
Maintenance
• Do not dismantle this product by yourself, as this may cause damage.
There are no user-serviceable parts contained in the TV set.
• If your TV set has been damaged, contact the after sales support line for
advice or take it to a local service center for inspection or repair. No
liability can be accepted for any damage caused by non-compliance with
these instructions or any other improper use or mishandling of appliance.
• This product should not be adjusted or repaired by anyone except
properly qualified personnel.
50
51
Troubleshooting (Cont.)
Specifications

*As RV Media continually strives to improve its products, Specifications may be
subject to change without notice.
Warranty
This product is backed up with a Nationwide 2-Year Warranty.
Camec Warranty Helpline: 1300 654 936
V1.0
52
53