PETERSON MFG.
SSS/3542
Incandescent Back-Up Lights
SEALED OVAL BACK-UP LIGHT
•Polycarbonate lens welded to housing to form single unit •Requires mounting grommet and
2-wire plug for installation •12-volt lamps designed with single filament, 2.1 amp, 32 cp bulb
•Meets DOT requirements in either horizontal or vertical positions •6.50”L x 2.25”W x 2.38”H
Part No. 416, Clear.
Part No. 416K, Kit, includes light, grommet, and right-angle plug, Clear.
Part No. 421-18, Grommet.
Part No. 421-49, 2-wire right angle plug.
Part No. 416-24V, 24V Clear lamp only.
Lighting & Mirror Products for Mobile Equipment
LED & Incandescent Utility & License Lights
4” ROUND SEALED BACK-UP LIGHT
•Fully automated manufacturing process ensures consistent quality and reliability •Features
extra wide, spin-welded, tongue-and-groove lens lip and waterproof
seal •High performance, copper alloy conductors eliminate the
possibility of wire failure •State-of-the art bulb design features three
supports for the minor filament
Part No. 431C, Clear.
Part No. 431KC, Kit, Clear.
Part No. 426-18, Grommet.
Part No. 431-49, 2-wire straight plug.
PIRANHA® GREAT WHITE® LED
UTILITY & LICENSE LIGHT KIT — 1
DIODE
•Meets FMVSS 108 and ECE requirements
•Also suitable for use as compartment or utility
light •9-32 volt operating range •2.50”L x
1.19”W x 0.88”H
Part No. 153C-MV, Lamp assembly, White.
Part No. 150-095, Mounting bracket.
GREAT WHITE® LED 1” AUXILIARY
UTILITY LIGHT — 2 DIODES
•Black rubber grommet included standard
•Grommet fits 3/4” hole •Hard wired design
prevents lamp-plug failures and cannot corrode
•9-16 volt operating range
Part No. 171C, Clear.
GREAT WHITE® LED LICENSE &
UTILITY LIGHTS — 4 DIODES
•Durable, low-draw LED design with hardwired
leads and metal base •#294C includes spacer
(shown in picture) for use as legal license light
•Single light with spacer meets DOT regulations above or to the side of license •#294 for
use as utility light only •Works with both 12V
and 24V systems •Hardwired design •2.53”L x
1.17”W x 0.90”H
Part No. 294C, License light with spacer.
Part No. 294, Utility light.
GREAT WHITE® LED LICENSE
LIGHTS — 2 DIODES
•Durable, low-draw LED design with hardwired
leads and metal base •Specially-designed
optics for optimal light dispersal •Requires two
lights to meet DOT license light requirements
when mounted to side of license plate •"XC"
version features attractive chrome finish
•Hardwired design •4.00”L x 1.63”W x 2.25”H
Part No. 296C, Black.
Part No. 296XC, Chrome.
GREAT WHITE® LED MINI UTILITY
LIGHT — 2 DIODES
•LED utility, interior, compartment, courtesy or
auxiliary light •Not for use as legally-required
marker or license light •Two Great White®
LEDs provide brilliant white light •9-16 volt
operating range •Mounts on 1-15/16” centers
•2.60”L x 0.75”W x 0.63”H
Part No. 168C, White.
GREAT WHITE® LED MULTI-VOLT
UTILITY LIGHT — 10 DIODES
•Features 10 extra-bright Great White® diodes
behind clear lens •Sealed lens and housing
•9-32 volt operating range works with both 12V
and 24V systems •Hardwired design •Easy
surface mounting •7.50”L x 3.25”W
Part No. 423W-4, Clear.
Part No. 423-11, Chrome Bezel.
SEALED 2” UTILITY LIGHT
•Popular 2” clear light is perfect as general
illumination utility light •High impact resistant
lens welded to the housing to form single
sealed unit •Features 15,000-hour long-life
bulb •Requires grommet and 2-wire plug to
complete installation
Part No. 146C, Clear.
Part No. 146-18, Grommet.
Part No. 142-49, Marker lamp plug.
SEALED LICENSE PLATE/UTILITY
LIGHT
•High impact resistant lens and housing are
welded into single unit for maximum protection
•Side of #150C lens painted to meet license
illuminator requirements •Interchangeable with
competitive units •Requires mounting bracket
and plug to complete installation •2.48”L x
1.20”W x 0.84”H
Part No. 150C, Clear.
Part No. 150-14, Gray license plate bracket.
Part No. 142-49, Marker lamp plug.
SEALED LICENSE PLATE / UTILITY
LIGHT
•Polycarbonate lens and housing welded into
single unit for maximum protection •Same
quality features as #150C in two-bulb design
•Requires mounting bracket and plug to complete installation •3.91”L x 1.20”W x 0.84”H
Part No. 154C, Clear.
LICENSE PLATE LIGHT
•Features patented Vibar® socket and
single lens screw for easy bulb replacement
•Polycarbonate lens and ABS housing provide
protection against damage and all internal
parts are corrosion-resistant •Surface mounts
with two screws on 1¾” centers •Grounds
through the mounting screws •2.69”L x 1.50”W
x 2.13”H
Part No. 400, Clear.
MINI UTILITY/COURTESY LIGHT
•Features polished, chrome-plated brass
housing with hooded shield to prevent upward
glare •Surface mounts with two stainlesssteel screws on 2” centers and has separate
ground wire for non-metallic surfaces •2.56”L x
1.129”W x 1.00”H
Part No. 434, Clear.
CHROME LICENSE PLATE LIGHT
•Features chrome-plated steel housing and
mounting bracket •Traditional style, bulbreplaceable light surface mounts on 2” centers
and grounds through mounting screws •Interchangeable with competitive models •2.75”L x
1.50”W x 2.00”H
Part No. 435, Clear.
LICENSE PLATE LIGHT
•Features patented Vibar® socket, tough
polycarbonate lens, and ABS hood •All
internal parts are durable stainless-steel or
tinned-brass •Surface mounts on 3.25” centers
•#436B includes a black powder-coated, steel
license plate bracket riveted to light •4.00”L x
1.75”W x 2.25”H
Part No. 436, Clear.
Part No. 436B, Comes with steel bracket,
Clear.
CHROME, STUD-MOUNT LICENSE
PLATE LIGHT
•Features patented Vibar® socket and
single lens screw for easy bulb replacement
•Chrome-plated version of 436 light with stud
mount •Ideal as replacement light for foreign
car license illuminators or for customizing
trucks, vans, and trailers •Single lead wire for
electrical connection; grounds through mounting bolts •2.69”L x 1.50”W x 2.13”H
Part No. 436SX, Clear.
CHROME LICENSE PLATE / UTILITY
LIGHT
•Features chrome-plated hood, steel housing,
and polycarbonate lens •437 includes single
lead wire with molded .156 bullet terminal and
grounds through mounting hardware •Similar
to styling on some GM vehicles •Two units
required for legal license illumination •3.06”W
x 2.25”H
Part No. 437, Clear.
SEALED CHROME LICENSE PLATE/
UTILITY LIGHT
•Chrome-plated steel light snaps into 1.25”
diameter hole (overall diameter is 1.50”)
•Commonly used to illuminate license plate
on step bumpers •Two units required for legal
license illumination •Also serves as perfect
interior, compartment, courtesy, or general
illumination utility light •Sealed with single 6”
lead wire •1.24”D x 1.70”L
Part No. 438, Clear.
S86
Canadian Today! Canadian Forever!