unity - Visa Lighting
advertisement
UNITY ™ Transforming the Patient Experience May 2010 Rev: 2011/09/30 Sample Catalog Number CB1900 -1TF32 (120V)-CRMTR- DIM-A Model Number Lamping Option (Voltage) CB1900 CB1902 TM Shade Options W H D 12" 12" 4" (305 mm) (305 mm) (102 mm) i 1TF32 CRMTR NATTR WHTTR DIM-A DIM-L FUSE NGT W H D 12" 12" 4" (305 mm) (305 mm) (102 mm) i 1TF32 CRMTR NATTR WHTTR DIM-A DIM-L FUSE NGT Line Drawings Abbreviation Key Photometrics and BIM i Configuration operates TF26 or TF32 lamp options Complete BIM (Building Information Modeling) and photometric files for these models may be downloaded from www.visalighting.com and can be labeled up to the highest wattage allowed Dimensions Top and Bottom Lens on model CB1902 only W H D Width Height Depth Nominal LED System Wattage Lamping Options (Voltage) i TF26 i TF32 H 32w triple, 4-pin GX24q-3 base, FLR 42w triple, 4-pin GX24q-4 base, FLR (MVOLT; 347V) (MVOLT; 347V) Specify Voltage or MVOLT MVOLT ballast operates 120V through 277V W Shade Options CRMTR NATTR WHTTR Cream Tri-lam Vinyl Natural Tri-lam Vinyl White Tri-lam Vinyl DIM-A DIM-L FUSE NGT Fluorescent dimming, Advance Mark 10, specify 120V or 277V Fluorescent dimming, Lutron Eco-10, specify 120V or 277V Fusing, specify 120V or 277V Night light (amber LED), 120V only Options Door Height = 7' Ceiling Height = 9' Silhouette Height = 6' 2 Options Dimensions 800-788-VISA www.visalighting.com LEDAMB UNITY indoor decorative and performance wall mount Top and Bottom Lens Option Lamping Options Model Model Shade Options CB1900 CB1902 3.0 3.0 Rev: 2011/09/30 DECORATIVE AND PERFORMANCE UNITY INDOOR TM Typical Applications Health Care Hospitality Health Care Features Antimicrobial housing finish Tri-lam vinyl coated shade for cleanability, fabric look to match Unity ceiling fixtures LED Options Low energy, long life LED night light option, amber color to minimize patient disturbance Modular design allows replacement of the LED assembly and driver Features 5 year product warranty Fluorescent lamping with dimming option Top and bottom acrylic lenses reduce the need to clean the interior of the fixture (CB1902) Approved for indoor damp locations Suggested Variations Alternative shade materials Increase or decrease fixture height or width Companions Unity Headwall 800-788-VISA www.visalighting.com Unity P 10 Ceiling Unity P4 Table P 12 3 Rev: 2011/09/30 Sample Catalog Number CM1900- 5F40 (120V) -TW9016- OLIN - FUSE Model Number Lamping Option (Voltage) Accent Finish Model Model CM1900 CM1901 TM Surface Mount CM1902 Surface Mount CM1903 W L D RD 23-3/4" 23-3/4" 1-7/8" 3-1/2" (603 mm) (603 mm) (48 mm) (89 mm) 5F40 Separate circuits for: reading (1 lamp) plus ambient (2 lamps) or exam (4 lamps) 3F40 Separate circuits for: reading (1 lamp) plus ambient (2 lamps) W L D RD 23-3/4" 23-3/4" 1-7/8" 3-1/2" (603 mm) (603 mm) (48 mm) (89 mm) 4F40 Separate circuits for: ambient (2 lamps) or exam (4 lamps) 2F40 Ambient W L D 23-3/4" 23-3/4" 5-3/8" (603 mm) (603 mm) (137 mm) 5F40 Separate circuits for: reading (1 lamp) plus ambient (2 lamps) or exam (4 lamps) 3F40 Separate circuits for: reading (1 lamp) plus ambient (2 lamps) W L D 23-3/4" 23-3/4" 5-3/8" (603 mm) (603 mm) (137 mm) 4F40 Separate circuits for: ambient (2 lamps) or exam (4 lamps) 2F40 Ambient Accent Finish Diffuser Options PTD MWAC OLIN BSLED CP FUSE NAF NGT VIRGB MWAC OLIN BSLED CP FUSE NAF NGT VIRGB MWAC OLIN BSLED FUSE NGT VIRGB MWAC OLIN BSLED FUSE NGT VIRGB PTD Options Patient Control Accessories (order separately) AY-CTZ Low voltage patient control, 2 Zone plus exam; requires patient control switch (by others), specify 120V or 277V AY-CFZ Low voltage patient control, 4 Zone plus exam; requires 2 patient control switches (by others), specify 120V or 277V Line Drawings CM1900 L CM1901 L W W Complete BIM (Building Information Modeling) and photometric files for these models may be downloaded from www.visalighting.com W L D RD Width Length Depth Recessed Depth F40 40w long twin tube, 2G11 base, FLR Nominal LED System Wattage Lamping Options (Voltage) (MVOLT; 347V) Specify Voltage or MVOLT MVOLT ballast operates 120V through 277V CM1903 Finishes L L W PTD W Painted - specify color code (ex. BRNZ for Bronze) Diffuser Options D D MWAC OLIN CM1900 CM1901 CM1902 CM1903 LEDBLU CM1902 RD D Photometrics and BIM Dimensions LEDRGB RD D Abbreviation Key LEDAMB UNITY indoor decorative and performance ceiling mount Recessed Mount Option Lamping Options Dimensions Recessed Mount Diffuser Option 11.5 23.0 10.0 11.5 23.0 10.0 11.5 23.0 10.0 11.5 23.0 10.0 Lumieo™ Matte White Acrylic Lumicor ® Oyster Linen Acrylic (coordinates with Cream Tri-lam shades) Luminous side panels are Lumieo™ matte white acrylic Options BSLED Accent Housing Housing Side Panel Diffuser Side Panel CP FUSE NAF NGT VIRGB Diffuse blue spectrum (blue LED). Recommended for staff control only. Not available with VIRGB or 347V; Specify 120V or 277V for recessed models Chicago plenum Fusing for fluorescent lamping, specify 120V or 277V Negative airflow (consult factory) Night light (amber LED), not available with 347V, specify 120V or 277V for recessed models Visual Interest color option (RGB LED), not available with BSLED, 120V only Diffuser Housing is painted white 1' fixture to wall Door Height = 7' Ceiling Height = 9' Silhouette Height = 6' CM1900 / CM1902 4 800-788-VISA www.visalighting.com CM1901 / CM1903 Rev: 2011/09/30 DECORATIVE AND PERFORMANCE UNITY INDOOR TM Patent Pending Typical Applications Patient Room Dental Office Medical Office Outpatient Facility Health Care Features Antimicrobial finishes (no VOC) on all interior and exterior painted surfaces 2 or 3 discrete circuits accommodate multi-level switching – 1 lamp for reading, 2 or 4 lamps for ambient/exam Switching interface accessory available for pillow speaker / nurse call systems Patient control of lighting environment (with switching interface accessory) Ballast replacement is plenum non-invasive LED Options Low energy, long life LED night light option, amber color to minimize patient disturbance Diffuse blue spectrum LED option Visual interest LED option with 4 RGB pixels in soft, random color pattern (remote driver) Modular design allows replacement of the LED assembly and driver Features 5 year product warranty Surface mount or recessed mount 3-1/2" recessed depth minimizes interference with systems within ceiling plenum Oven cured no VOC acrylic powder coat for painted finishes; oven cured low VOC clear coat on metal finishes Fluorescent lamping Luminous side panels are are made of Lumieo™ matte white acrylic Captive swing down lenses with spring loaded thumb latches for tool-less lamp replacement Approved for indoor damp locations Suggested Variations Adapt for recessed installation in drywall Opaque diffuser side panels Alternative accent finish CM1900 with 5F40 lamping and MWAC diffuser mounted 8' 6" AFF and 12" from the wall at the head of the bed Wall 1' 2' 3' 4' 5' | | | | | 6' | 2.2 2.3 2.1 1.8 1.4 1.1 BSLED 1.5 1.5 1.4 1.2 0.9 0.7 NGT 72 75 69 58 45 34 Exam 37 40 36 31 24 18 Ambient 15 17 17 13 13 11 Reading CM1900 Values are average initial footcandles on the bed surface (36" AFF) at the specified distance from headwall CM1900 / CM1902 CM1901 / CM1903 Reading Companions Unity Ambient Ambient Exam Exam Wall 800-788-VISA www.visalighting.com Unity P2 Headwall Unity P 10 Table P 12 5 Rev: 2011/09/30 Sample Catalog Number CM1906- 7F40 (120V) -TW9016- OLIN - FUSE Model Number Lamping Option (Voltage) Accent Finish Model Model CM1906 CM1908 TM W L D RD 23-3/4" 47-3/4" 1-7/8" 3-1/2" (603 mm) (1231 mm) (48 mm) (89 mm) 7F40 Separate circuits for: reading (1 lamp) plus ambient (2 lamps) or exam (6 lamps) 3F40 Separate circuits for: reading (1 lamp) plus ambient (2 lamps) W L D 23-3/4" 47-3/4" 4-7/8" (603 mm) (1213 mm) (124 mm) 7F40 Separate circuits for: reading (1 lamp) plus ambient (2 lamps) or exam (6 lamps) 3F40 Separate circuits for: reading (1 lamp) plus ambient (2 lamps) Accent Finish Diffuser Options PTD MWAC OLIN BSLED CP FUSE NAF NGT VIRGB PTD MWAC OLIN BSLED FUSE NGT VIRGB Options Patient Control Accessories (order separately) AY-CTZ Low voltage patient control, 2 Zone plus exam; requires patient control switch (by others), specify 120V or 277V AY-CFZ Low voltage patient control, 4 Zone plus exam; requires 2 patient control switches (by others), specify 120V or 277V Line Drawings CM1906 L W Photometrics and BIM Dimensions Complete BIM (Building Information Modeling) and photometric files for these models may be downloaded from www.visalighting.com Width Length Depth Recessed Depth F40 40w long twin tube, 2G11 base, FLR Nominal LED System Wattage Lamping Options (Voltage) (MVOLT; 347V) Specify Voltage or MVOLT MVOLT ballast operates 120V through 277V CM1908 Finishes L W PTD Painted - specify color code (ex. BRNZ for Bronze) MWAC OLIN Lumieo™ Matte White Acrylic Lumicor ® Oyster Linen Acrylic (coordinates with Cream Tri-lam shades) CM1906 11.5 23.0 20.0 CM1908 11.5 23.0 20.0 Diffuser Options D Luminous side panels are Lumieo™ matte white acrylic Options BSLED Housing Side Panels Accent Diffuser Diffuse blue spectrum (blue LED). Recommended for staff control only. Not available with VIRGB or 347V; Specify 120V or 277V for CM1906 Chicago plenum Fusing for fluorescent lamping, specify 120V or 277V Negative airflow (consult factory) Night light (amber LED), not available with 347V, specify 120V or 277V for CM1906 Visual Interest color option (RGB LED), not available with BSLED, 120V only CP FUSE NAF NGT VIRGB Wall Housing is painted white 1' fixture to wall Door Height = 7' Ceiling Height = 9' Silhouette Height = 6' 1' 13 32 91 1.1 1.9 2' 14 37 103 1.3 2.1 3' 15 38 108 1.3 2.1 4' 14 37 105 1.3 1.9 5' 13 33 94 1.1 1.7 6' 11 28 80 1.0 1.4 D LE BS T NG nt am bie ing ad Ex Re Am 6 CM1906 with 7F40 lamping and MWAC diffuser mounted 8' 6" AFF and 12" from the wall at the head of the bed Values are average initial footcandles on the bed surface (36" AFF) at the specified distance from headwall 800-788-VISA www.visalighting.com LEDBLU W L D RD LEDRGB RD D Abbreviation Key LEDAMB UNITY indoor decorative and performance ceiling mount Surface Mount Option Lamping Options Dimensions Recessed Mount Diffuser Option Reading Ambient Exam Rev: 2011/09/30 DECORATIVE AND PERFORMANCE UNITY INDOOR TM Patent Pending Typical Applications Health Care Health Care Features Antimicrobial finishes (no VOC) on all interior and exterior painted surfaces 3 discrete circuits accommodate multi-level switching – 1 lamp for reading, 2 or 6 lamps for ambient/exam Switching interface accessory available for pillow speaker / nurse call systems Patient control of lighting environment (with switching interface accessory) Ballast replacement is plenum non-invasive LED Options Low energy, long life LED night light option, amber color to minimize patient disturbance Diffuse blue spectrum LED option Visual interest LED option with 8 RGB pixels in soft, random color pattern (remote driver) Modular design allows replacement of the LED assembly and driver Features 5 year product warranty Surface mount or recessed mount 3-1/2" recessed depth minimizes interference with systems within ceiling plenum Oven cured no VOC acrylic powder coat for painted finishes; oven cured low VOC clear coat on metal finishes Fluorescent lamping Luminous side panels are are made of Lumieo™ matte white acrylic Captive swing down lenses with spring loaded thumb latches for tool-less lamp replacement Approved for indoor damp locations Suggested Variations Adapt for recessed installation in drywall Opaque diffuser side panels Alternative accent finish CM1906 Companions Unity Wall 800-788-VISA www.visalighting.com Unity P2 Headwall Unity P 10 Table P 12 7 Rev: 2011/09/30 Sample Catalog Number CM1912 - 3FS39 - 1TF42 (120V) Model Number - BSIL Lamping Option (Voltage) CM1912 Two-unit set wired in tandem CM1914 TM Two-unit set wired in tandem Diffuser Option - Available Only As A Dual Overbed Set FUSE Option Reading W L D RD 8-3/4" 47-3/4" 1-3/4" 3-1/2" (222 mm) (1213 mm) (44 mm) (89 mm) 3FS39 - i 1TF42 Separate circuits in each unit for: reading (1 lamp) plus ambient (1 lamp) or exam (3 lamps) Primary and secondary units are switched together 1FS39 - i 1TF42 Separate circuits in each unit for: reading (1 lamp) plus ambient (1 lamp) Primary and secondary units are switched together W L D 8-3/4" 47-3/4" 4-3/4" (222 mm) (1213 mm) (121 mm) 3FS39 - i 1TF42 Separate circuits in each unit for: reading (1 lamp) plus ambient (1 lamp) or exam (3 lamps) Primary and secondary units are switched together 1FS39 - i 1TF42 Separate circuits in each unit for: reading (1 lamp) plus ambient (1 lamp) Primary and secondary units are switched together Accent Finish Diffuser Options PTD MWAC OLIN BSLED CP FUSE NAF NGT VIRGB PTD MWAC OLIN BSLED FUSE NGT VIRGB Options Patient Control Accessories (order separately) AY-CTZ Low voltage patient control, 2 Zone plus exam; requires patient control switch (by others), specify 120V or 277V AY-CFZ Low voltage patient control, 4 Zone plus exam; requires 2 patient control switches (by others), specify 120V or 277V Line Drawings Abbreviation Key Photometrics and BIM i Configuration operates TF26, TF32 or TF42 lamp options CM1912 Complete BIM (Building Information Modeling) and photometric files for these models may be downloaded from www.visalighting.com and can be labeled up to the highest wattage allowed Dimensions L W RD D W L D RD Width Length Depth Recessed Depth Nominal LED System Wattage (master and slave units) W (MVOLT; 347V) (MVOLT; 347V) (MVOLT; 347V) (MVOLT; 347V) LEDBLU L 39w T-5/HO, mini bi-pin base, FLR 26w triple, 4-pin G24q-3 base, FLR 32w triple, 4-pin GX24q-3 base, FLR 42w triple, 4-pin GX24q-4 base, FLR LEDRGB Lamping Options (Voltage) FS39 i TF26 i TF32 i TF42 CM1914 LEDAMB UNITY indoor decorative and performance ceiling mount Surface Mount - Lamping Options (per unit) Ambient/ Exam Dimensions (per unit) Recessed Mount OLIN Accent Finish Model Model - CM1912 11.6 CM1914 11.6 23 15 23 15 Specify Voltage or MVOLT MVOLT ballast operates 120V through 277V D Finishes PTD Painted - specify color code (ex. BRNZ for Bronze) MWAC OLIN Lumieo™ Matte White Acrylic Lumicor ® Oyster Linen Acrylic (coordinates with Cream Tri-lam shades) Diffuser Options Secondary Unit Housing Diffuser side panels are Lumieo™ matte white acrylic Side Panel Options Diffuser BSLED Primary Unit 2' separation between units Accent Diffuse blue spectrum (blue LED). Recommended for staff control only. Not available with VIRGB or 347V; Specify 120V or 277V for CM1912 Chicago plenum Fusing for fluorescent lamping, specify 120V or 277V Negative airflow (consult factory) Night light (amber LED), not available with 347V, specify 120V or 277V for CM1912 Visual Interest color option (RGB LED), not available with BSLED, 120V only CP FUSE NAF NGT VIRGB Wall Housing is painted white 1' fixture to wall 18 29 83 1.1 1.7 2' 21 32 92 1.3 1.8 3' 23 32 93 1.3 1.8 4' 23 30 87 1.3 1.7 5' 21 26 75 1.1 1.5 6' 19 22 63 1.0 1.2 Re Am Ex Door Height = 7' Ceiling Height = 9' Silhouette Height = 6' 1' One pair of fixtures spaced 24” apart oriented to the length of the bed, mounted 8' 6" AFF and 12" from the wall at the head of the bed Values are average initial footcandles on the bed surface (36" AFF) at the specified distance from headwall Reading Ambient and Exam D LE BS T NG nt am ing bie ad 8 CM1912 with 3FS39 lamping, 1TF42 reading lamping, and MWAC diffuser 800-788-VISA www.visalighting.com Rev: 2011/09/30 DECORATIVE AND PERFORMANCE UNITY INDOOR TM Patent Pending Dual Overbed Solution Typical Applications Health Care Health Care Features Antimicrobial finishes (no VOC) on all interior and exterior painted surfaces 3 discrete circuits accommodate multi-level switching – 1 lamp for reading, 1 or 3 lamps for ambient/exam (per unit) Switching interface accessory available for pillow speaker / nurse call systems Patient control of lighting environment (with switching interface accessory) Ballast replacement is plenum non-invasive LED Options Low energy, long life LED night light option, amber color to minimize patient disturbance Diffuse blue spectrum LED option Visual interest LED option with 3 RGB pixels in soft, random color pattern (remote driver) Modular design allows replacement of the LED assembly and driver Features 5 year product warranty Set of 2 surface mount or recessed mount units 3-1/2" recessed depth minimizes interference with systems within ceiling plenum Oven cured no VOC acrylic powder coat for painted finishes; oven cured low VOC clear coat on metal finishes Fluorescent lamping Factory installed connectors join primary and secondary units Luminous side panels are are made of Lumieo™ matte white acrylic Captive swing down lenses with spring loaded thumb latches for tool-less lamp replacement Approved for indoor damp locations Suggested Variations Adapt for recessed installation in drywall Opaque diffuser side panels Alternative accent finish CM1912 Companions Unity Wall 800-788-VISA www.visalighting.com Unity P2 Headwall Unity P 10 Table P 12 9 Rev: 2011/09/30 Sample Catalog Number CB1904 - 2FS28 - 1FS28 (MVOLT) Model Number - Lamping Option (Voltage) - OLIN (per unit) Dimensions Uplight - - AMC Diffuser Option Lamping Options Model Model PB1035 End Cap Finish Option End Cap Finish Diffuser Options Options Downlight W H D 49" 7-1/4" 7-1/8" (1245 mm) (184 mm) (181 mm) 2FO32 - 1FO32 2FS28 - 1FS28 2FS54 - 1FS54 PTD MWAC OLIN AMC CTZ CFZ FUSE NGT QPR CB1906 W H D 111" 7-1/4" 7-1/8" (2819 mm) (184 mm) (181 mm) 2FO32 - 1FO32 2FS28 - 1FS28 2FS54 - 1FS54 PTD MWAC OLIN AMC CTZ CFZ FUSE NGT QPR CB1908 W H D 173" 7-1/4" 7-1/8" (4394 mm) (184 mm) (181 mm) 2FO32 - 1FO32 2FS28 - 1FS28 2FS54 - 1FS54 PTD MWAC OLIN AMC CTZ CFZ FUSE NGT QPR TM UNITY indoor decorative and performance wall mount CB1904 Line Drawings W Top Lens Abbreviation Key Photometrics and BIM Dimensions Complete BIM (Building Information Modeling) and photometric files for these models may be downloaded from www.visalighting.com Width Height Depth FO32 FS28 FS54 32w T-8, medium bi-pin base, FLR 28w T-5, mini bi-pin base, FLR 54w T-5/HO, mini bi-pin base, FLR Lamping Options (Voltage) H End Cap Diffuser Bottom Lens (not visible) (MVOLT; 347V) (MVOLT; 347V) (MVOLT; 347V) Nominal LED System Wattage LEDAMB W H D Specify Voltage or MVOLT MVOLT ballast operates 120V through 277V CB1904 11.5 CB1906 11.5 CB1908 11.5 Finishes Plan View PTD Painted - specify color code (ex. BRNZ for Bronze) MWAC OLIN Lumieo™ Matte White Acrylic Lumicor ® Oyster Linen Acrylic (coordinates with Cream Tri-lam shades) AMC CTZ CFZ FUSE NGT QPR Antimicrobial coating (no VOC) for painted surfaces Low voltage patient control, 2 Zone; pillow switch (by others) required, specify 120V or 277V Low voltage patient control, 4 Zone; 2 pillow switches (by others) required, specify 120V or 277V Fusing for fluorescent lamping, specify 120V or 277V Night light (amber LED), not available with 347V Quick power release, 120V only CB1904 — 49" width — single unit Diffuser Options CB1906 — 111" width — 2 units CB1908 — 173" width — 3 units Options 39/5/44/0.50 8' 8/3/11/0.19 5' 8/4/12/0.17 4' 1' 12/4/16/0.29 20/6/25/0.41 35/7/42/0.57 65/10/75/0.81 Average illuminance (FC) on wall surface above bed centerline and 3.5 ft to either side 115/13/128/1.64 169/19/187/2.31 • All values obtained using 2FS54-1FS54 lamping • Room Reflectance Standard 80/50/20 • Bed is 36" wide • Values are initial footcandles, as follows: Ambient/Reading/Both/Nightlight Average illuminance (FC) on ceiling surface above bed centerline and 3.5 ft to either side Ambient Height A.F.F. Door Height = 7' Ceiling Height = 9' Silhouette Height = 6' 6. 2' 9' Distance from headwall 3' 4' 5' 6' Bed 3' 10 19/9/28/0.50 24/13/37/0.70 30/18/48/0.87 35/27/62/1.11 38/38/76/1.31 32/47/80/1.21 CB1904 800-788-VISA www.visalighting.com Average illuminance (FC) on bed surface • Split optic is angled for directional output • Hammertone reflector Reading Rev: 2011/09/30 DECORATIVE AND PERFORMANCE UNITY INDOOR TM Typical Applications Health Care Health Care Features Optional antimicrobial coating (no VOC) for all interior and exterior painted surfaces Easy to clean fabric look matches Unity ceiling fixtures Quick power release option cuts power to bed in the event of excess force on the fixture bottom (120V only) Patient control of lighting environment LED Options Low energy, long life LED night light option, amber color to minimize patient disturbance Modular design allows replacement of the LED assembly and driver Features 5 year product warranty Clear top lens for ambient uplight; Lumieo bottom lens provides diffuse downlight for reading Oven cured no VOC acrylic powder coat for painted finishes Fluorescent lamping Approved for indoor damp locations Suggested Variations Increase or decrease fixture width CB1904 Companions Unity Wall 800-788-VISA www.visalighting.com Unity P2 Ceiling Unity P4 Table P 12 11 Rev: 2011/09/30 Sample Catalog Number TF1902- 1TF32 (120V) -PB1035-FBCRM- NGT Model Number Lamping Option (Voltage) Model Model Finish Shade Option Lamping Options Finish Shade Options Options Dimensions TF1900 TM W H D SH 15" 28-3/8" 7-1/8" 14" (381 mm) (721 mm) (181 mm) (356 mm) i 1TF42 PTD BA BCA SNA ESWHT ESNAT ESCRM FBWHT FBNAT FBCRM AMC DIM FSB FSBE NGT W H D SH 15" 28-3/8" 7-1/8" 14" (381 mm) (721 mm) (181 mm) (356 mm) i i 1TF32 PTD BA BCA SNA ESWHT ESNAT ESCRM FBWHT FBNAT FBCRM AMC DIM FSB FSBE NGT Line Drawings TF1900 Abbreviation Key TF1902 Complete BIM (Building Information Modeling) and photometric files for these models may be downloaded from www.visalighting.com and can be labeled up to the highest wattage allowed Top Lens W Photometrics and BIM i Configuration operates TF26, TF32 or TF42 lamp options i i Configuration operates TF26 or TF32 lamp options and can be labeled up to the highest wattage allowed Dimensions SH W H D SH Width Height Depth Shade Height Nominal LED System Wattage LEDAMB UNITY indoor decorative and performance table lamp with Top Lens TF1902 H Option Lamping Options (Voltage) Elliptical shades shown i TF26 i TF32 i TF42 26w triple, 4-pin GX24q-3 base, FLR 32w triple, 4-pin GX24q-3 base, FLR 42w triple, 4-pin GX24q-4 base, FLR (120V) (120V) (120V) TF1900 TF1902 2.4 2.4 Finishes Standard Base (fixed mount) Free Standing Base FSB option Adds 3/8" to H dimension Dimming and Electrical Outlet Base DIM and FSBE options Adds 2-1/2" to H dimension Flat-Back Shade Depth 5-3/8" Standard Shade Depth 7-1/8" Elliptical Shade, Flat-back Shade and Base Dimensions Top View 15 Width" Standard Base (Fixed Mount) 2-1/8" 4-1/4" 15 Width" PTD BA BCA SNA Painted - specify color code (ex. BRNZ for Bronze) Brushed Aluminum Brushed Chrome Alternative Satin Nickel Alternative ESWHT ESNAT ESCRM FBWHT FBNAT FBCRM Elliptical shade, White Tri-lam vinyl Elliptical shade, Natural Tri-lam vinyl Elliptical shade, Cream Tri-lam vinyl Flat-back shade, White Tri-lam vinyl Flat-back shade, Natural Tri-lam vinyl Flat-back shade, Cream Tri-lam vinyl AMC DIM Antimicrobial coating (no VOC) for painted and metal finishes In-fixture dimming (included dimming base adds 2-1/2" to H dimension) Free standing base (adds 3/8" to H dimension) Free standing base with electrical outlet (adds 2-1/2" to H dimension) Night light (amber LED) Shade Options Space Saving Flat-back Shade, White Tri-lam vinyl (FBWHT) Options FSB FSBE NGT Free Standing Base (FSB Option) 4" Dimming and Electrical Outlet Base (DIM and FSBE options) 5-1/4" 6-1/8" Night Light (NGT) option Bed Table Top 6" 7-1/4" 12" 30" 48" 49/4 44/2 Door Height = 7' Ceiling Height = 9' Silhouette Height = 6' Maintained Foot Candles, 1TF42 / NGT option 4.3/0.2 (floor) Fixture is spaced 6" from wall Table and bed 2.5' AFF 12 800-788-VISA www.visalighting.com 6.5/0.2 (floor) Rev: 2011/09/30 DECORATIVE AND PERFORMANCE UNITY INDOOR TM Typical Applications Health Care Hospitality Education Health Care Features Optional antimicrobial coating (no VOC) for painted and metal finishes Tri-lam vinyl coated shade for cleanability, fabric look to match Unity ceiling fixtures (CRMTR coordinates with OLIN Lumicor) Flat backed shade option allows placement at edge of table against wall Fixed mount base (standard) maximizes available table space and prevents accidental tipping, optional freestanding base allows portability Hospital grade plug and cord LED Options Low energy, long life LED night light option, amber color to minimize patient disturbance Modular design allows replacement of the LED assembly and driver Features 5 year product warranty Oven cured no VOC acrylic powder coat for painted finishes; oven cured low VOC clear coat on metal finishes Fluorescent lamping Optional dimming base Approved for indoor damp locations Suggested Variations Floor lamp Different shade shape Alternative shade material Hardwired for remote dimming TF1902 Companions Unity Wall 800-788-VISA www.visalighting.com Unity P2 Headwall Unity P 10 Ceiling P4 13 www.visalighting.com
