HIGH-PRESSURE
HOSE-DOWN
No w with LED!
FEM LED
FHE LED
With Clear Lens
With Frosted Lens
FEM LED
FHE LED
With Clear Lens
With Frosted Lens
Versatility is our strength. LEDs are your answer.
The FEM LED and FHE LED high-pressure
INSTALL indoors or outdoors
hose-down fixtures are a winning combination
in the Lithonia Lighting product line. Whether
USE in cold or warm temperatures
your space is indoors, outdoors, hot or
cold, these versatile fixtures can be used at
MOUNT in high spaces or low spaces
high or low mounting heights. With durable
construction
and
long-lasting
electrical
components, the FEM LED and FHE LED fixtures
can take a beating while providing long life and
energy savings.
FEM LED Applications: Parking garages
Exterior retail
Cold storage
Warehouses
LED Technology
Lens Options
Our LEDS are tightly binned to ensure there
is no color shift from one LED to another, or
from one production run to the next. Not
all manufacturers take the same amount of
care to provide you the most uniform light
possible. In addition, each fixture has an
expected service life of 60,000 hours with
80% lumen maintenance.
We know glare can be a concern in certain
applications. That’s why we give you the
option of a frosted lens to soften the light.
If glare is not a concern, choose the clear
lens to achieve maximum light output.
Multiple Color Temperatures
We’ve got you covered with five different
color temperatures: 27K, 35K, 41K, 57K and
even Amber for those coastal and livestock
applications.
FHE LED Applications: Food and beverage processing
Controls
Preserving energy or the life or your fixture
is easy with our controls solutions. 0-10V
dimming is standard on our products.
Specify the DIM option and we’ll pre-wire it
for you. Save even more energy by adding
an occupancy sensor in spaces that are
often unoccupied.
Cold storage
Natatoriums
Garden centers
Ordering information
Example: FHE LED 15L/57 FST
We strive for short lead times. Some configurations, however, may have longer lead times. Consult with your sales representative.
Series
Lumens/Color temperature1
FHE LED 15"X4'
5L
7L
9L
12L
15L
5,000 lumens
7,000 lumens
9,000 lumens
12,000 lumens
15,000 lumens
2
(blank)
27
35
57
AMB
4100K, 65 CRI
2700K, 80CRI
3500K, 80 CRI
5700K, 70 CRI
Amber LEDs
Distribution
Shielding
Voltage
(blank) General distribution
SD
Spread distribution
(blank) Clear acrylic
PCL
Clear polycarbonate
FST
Frosted acrylic
(blank)
HVOLT
120
277
347
480
MVOLT; 120-277V
HVOLT; 347-480V; 60Hz only
120V
277V
347V (60Hz only)
480V (60Hz only)
Options3
CS89
6' white cord, 16/3, no plug, wet location
CS89L12 12' white cord, 16/3, no plug, wet location
CS88
MHKB
WLF
6' Brad Harrison 16/3 cord and straight blade plug set,
wet location
Stainless steel V-hook and brackets
Wet location fitting (two pre-installed, 40" off centers)
L/SP
DIM
DIM2
PMP
MSI__
Less surge protector
Pre-wired for 0-10V low-voltage dimming (100-10%)
Line-voltage power control (100-50%)4
Pendant monopoint5
Wet location 360° motion sensor pre-wired for ON/OFF
operation6, 7
Accessories: Order as separate catalog number.
FHEMHKB
FHEEMK
FHERMK
MHCH36
LCF
Series
FEM4 LED
FEM8 LED
MHHK120
MHHK120SS
FHEACT120
FHEACT240
RK1 T10DRV
10' single leg aircraft cable
10' single leg aircraft cable , stainless steel11
10' Y-toggle aircraft cable
20' Y-toggle aircraft cable
Torx® T10 screwdriver for TRS option
11
1
2
3
4
5
6
7
8
9
10
11
The CCT value provided is of lamp source and actual CCT will vary upon levels.
Not available with SD option.
For additional options consult factory.
Available with 7L, 9L or 15L.
Housing pre-drilled with WLF in center; additional support cables required.
For mounting up to 20', specify MSI20; for mounting up to 40', specify MSI40.
Must specify voltage.
Stainless steel Torx® T10 screws with center reject pin.
Not available with HVOLT, 347 or 480.
For use with MHKB option.
For use with EMK option.
We strive for short lead times. Some configurations, however, may have longer lead times. Consult with your sales representative.
Lumens/Color temperature
Distribution
1
4'
8'
TRS
NOM
Wet location 360° motion sensor, pre-wired for HI/
LO operation6, 7
Tamper-resistant screws8
Meets Mexican standards
Notes
Stainless steel V-hook and brackets
End mount suspension bracket9
Rigid mounting bracket
3' double chain10
Light/glare control film
Ordering information
MSI_D
Nominal Lumens
3L 3000 lumens
4L 4000 lumens
6L 6000 lumens
9L 9000 lumens
Color temperature
(blank) 4100K (CRI 65)
27
2700K (CRI 80)
35
3500K (CRI 80)
57
5700K (CRI 70)
AMB
Amber LED
Example: FEM4 4L/57 IMAFL
Diffuser
Voltage
(blank)
General distribution
IMAFL
Acrylic, lineal ribbed frosted lens
SD
Spread distribution
IMACD
Acrylic, clear deep lens
IMAFD
Acrylic, clear deep frosted lens
(blank)
120
277
MVOLT
120V
277V
Options3
CS89
6' white cord, 16/3, no plug, wet location
CS89L12 12' white cord, 16/3, no plug, wet location
CS88
6' Brad Harrison 16/3 cord and straight blade plug set,
wet location2
CS88L12 12' Brad Harrison 16/3 cord and straight blade plug
set, wet location Stainless steel V-hook and brackets2
L/SP
DIM
Less surge protector
Pre-wired for 0-10V low-voltage dimming
(100-10%)
DIM2
Line-voltage power control (100% - 50%) 3
MSI__ Wet location 360° motion sensor pre-wired for
ON/OFF operation2,3
TRS
Tamper resistant Torx® T20 Screws
WLF
Wet location fitting (two pre-installed, 40" off centers)
WLFEND Wet location fitting (one end)
PLCL
Polycarbonate latches
Accessories: Order as separate catalog number.4
Notes
HC36
MHHK120
MHHK120SS
RK1 T20DRV
1
2
3
4
Hook and 36" chain (ships as pair)
10' single leg air craft cable
10' single leg air craft cable, stainless steel
Torx® T20 screwdriver for TRS option
INDUSTRIAL | One Lithonia Way, Conyers, GA 30012 | Phone: 800.315.4963 | www.lithonia.com
The CCT value provided is of lamp source and actual CCT will vary upons levels.
Must specify voltage.
Available with 8’ only.
For mounting up to 8', specify MSI8; for mounting up to 20', specify MSI20; for mounting up to 40', specify MSI40.
© 2012 Acuity Brands Lighting, Inc. All rights reserved.
Rev. 11/12 IR7386 Form No.160.22