MX A VARIETY OF TRIM OPTIONS: Open downlight Lensed Lensed trimless Open wall wash Lensed wall wash Lensed trimless wall wash BLANK 2 Pinhole FUSION ER3 IC SERIES LED DOWNLIGHT LED ER3 RECESSED Open downlight Lensed Lensed trimless Pinhole Rotates: Horizontally 359º Vertically 45º Lockable Open wall wash Lensed wall wash 900 ER3 INPUT VOLT. INPUT FREQ. 120/277 120/277 50/60Hz 50/60Hz Lensed trimless wall wash INPUT CUR. INPUT POWER >0.9 >0.9 900 650 Fixture is designed to ensure the center beam of the light bulb emerges out of fixture at any angled position from 0º to 359° horizontally and 0º to 45° vertically with a screw driver. DESCRIPTION: 3” LED Round Recessed directional, accent, and downlight fully adjustable luminaire, is ideal for retail, hospitality, commercial, and high-end residential applications. Designed for new construction installations and suitable for use in insulation covered. Lighting is smooth and comfortable while using 75% less energy than the equivalent 65W BR30 & 75W BR30 and 25% less than the common 18W & 26W CFL luminaire. Plus, the eco-friendly Elite LED system features 70% lumen maintenance at 50,000 hours life, with Energy Star and California Title-24 (compliances pending). HOUSING: Thermally protected, specification grade adjustable recessed housing. For new construction insulated ceilings where housing will be in direct contact with insulation. Die-formed all aluminum construction matt black painted for maximum heat dissipation, rust protection and glare free illumination. F U S I FUSION O N FC E RMETAL 3 I C S E SERIES R I E S HALIDE L E D 443-A THD POWER FACTOR LUMENS 150mA/65mA 18W(+/-5%) <20% 116mA/50mA 14W(+/-5%) <20% ADJUSTABILITY COLLAR BRACKET: Adjusts vertically and can accommodate any ceiling from ½” up to 1” thickness. Please consult factory for custom or thicker ceiling applications. Integral laser beam slots allow the use of guide strings or leveling laser guns to ensure that all luminaries are installed in an level and straight plane. Collar can be rotated up to 45° once the housing is installed in the ceiling (prior to having drywall installed). TRIM OPTION: Post painted powder coated Die-Cast trim ring available in white and chrome. Please consult factory for custom paint color options. Collar and trim rotate jointly. Solite Frosted Lens is standard on all trims. Please consult factory for additional lens options. Available in lensed adjustable downlight or lensed adjustable wallwash. TRIM- LESS: Die-Cast perforated meshcover intended for installation in drywall or plaster ceilings. Mudding maybe applied right up to the edge of the fixture opening to provide seamless appearance. Trim-Less accessory is secured to the housing to prevent fractures in the ceiling and or drywall during and after installation. AIMING: Fusion ER3’s proprietary hot aiming system allows the lamp to be positioned at the perfect setting to ensure the proper position of the beam of light before trim is installed. Lamp holder is designed to ensure that the center beam of the light bulb emerges out of fixture at any angled position from 0° to 45°. The lamp holder contains degree markings, rotates 359° horizontally and 45° vertically with a screw driver. The lamp holder is lockable at both the vertical and the horizontal plane. The integrity of the design and lamp positioned are kept during relamping or servicing the fixture. ELECTRICAL/ TRANSFORMER: Junction box and transformer maybe accessed from below the ceiling and above the ceiling. Junction Box is Listed for through branch circuit wiring,12 AWG 90º C supply Conductors, and has four 1/2” KOs, one 3/4” KO and four Romex knockouts with true pry-out slots and strain clamps. Transformer supplied is thermally protected Class II dimming electronic transformer enhanced in heat dissipating cover attached to junction box cover. De-rated lamp wattage labeling is available please consult factory. MOUNTING: Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24” joist span. They can be positioned on either the long or short axis of the housing and can be shortened for 12” joists. They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20º downward angle for better contact, and the 90º pivoting mounting plate makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary. Butterfly brackets are also provided and are constructed from 18-gauge steel and can be adjusted vertically. Butterfly brackets may be installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or optional C-Channel mounting bars are available. LABELS: c-UL-us listed for damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for direct contact with insulation. WARRANTY: Fusion ER Recessed luminaries are covered by Fusion’s one year limited warranty. As a system, we stand behind our entire products from housing to bar hangers. WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333 FUSION ER3 IC SERIES LED DOWNLIGHT LED ER3 RECESSED Open downlight 1302 Lensed Downlight 1328 Lensed trimless Downlight ETS Open wall wash 1363 Lensed wall wash 1307 Lensed trimless wall wash ETSW Pinhole 1314 3” 3” 7” ER3 7” 16” 10” 4” 5-3/8” F U S I O N ER3-T-Housing ER3-F-Housing 3” 4” ORDERING INFORMATION E R 3 Example: ER3-F-LED-IC-900L-DIMTR-120-30K-EFS-1302-W-WH LUMINAIRE SELECTION IC HOUSING TYPE SERIES FLANGE OPTION LIGHT SOURCE ES3 F - (Flanged) T - (Trimless) LED IC - New construction insulated ceiling LUMENS 650L 900L DIMMING DIMTR-120 LUTH-120 LUTH-277 DIM10-MVOLT CCT ACCESSORIES/OPTIONS OPTIONS 27K 30K 35K 40K 50K blank - Standard bar hangers (included) BP31 - 27” C-channel bar hangers RIF - RIF filter S E R I E S LED I C ES3 - TRIM OPTION SELECTION L E D TRIM FLANGE OPTION EFS - Flanged trim ETS - Trimless Downlight ETSW - Trimless Wall Wash TRIM 1302 1328 1363 1307 1314 TRIM COLOR - Open Downlight W-WH - White - Lensed Downlight CL-WH - Chrome - Open Wall Wash B-WH - Black - Lensed Wall Wash - Pinhole TRIM ACCESSORIES BP-ES3-MR16-CL - Clear Lens BP-ES3-MR16-LI - Linear spread Lens BP-ES3-MR16-SP - Spread/Prismatic Lens BP-ES3-MR16-SO - Solite Lens BP-ES3-MR16-UV - Anti UV/Ultraviolet Lens Due to the changes of constant improvement in lighting technology, all details are subject to change without notice. Consult factory for up to date information. 443-B FUSION ER3 NON-IC SERIES LED DOWNLIGHT LED ER3 RECESSED Open downlight Lensed Lensed trimless Pinhole Rotates: Horizontally 359º Vertically 45º Lockable Open wall wash 2000 ER3 Lensed wall wash INPUT VOLT. INPUT FREQ. 120/277 120/277 50/60Hz 50/60Hz Lensed trimless wall wash INPUT CUR. INPUT POWER THD 266mA/115mA 200mA/86mA 32W(+/-5%) 24W(+/-5%) <20% <20% >0.9 >0.9 2000 1200 Fixture is designed to ensure the center beam of the light bulb emerges out of fixture at any angled position from 0º to 359° horizontally and 0º to 45° vertically with a screw driver. DESCRIPTION: 3” LED Round Recessed directional, accent, and downlight fully adjustable luminaire, is ideal for retail, hospitality, commercial, and high-end residential applications. Designed for new construction installations and suitable for use in non insulation covered. Lighting is smooth and comfortable while using 75% less energy than the equivalent 65W BR30 & 75W BR30 and 25% less than the common 18W & 26W CFL luminaire. Plus, the eco-friendly Elite LED system features 70% lumen maintenance at 50,000 hours life, with Energy Star and California Title-24 (compliances pending). HOUSING: Thermally protected, specification grade adjustable recessed housing. For new construction insulated ceilings where housing will be in direct contact with insulation. Die-formed all aluminum construction matt black painted for maximum heat dissipation, rust protection and glare free illumination. F U S I O NFUSION E R 3FC METAL N O NHALIDE - I C SERIES S E R I E S L E D 443-C POWER FACTOR LUMENS ADJUSTABILITY COLLAR BRACKET: Adjusts vertically and can accommodate any ceiling from ½” up to 1” thickness. Please consult factory for custom or thicker ceiling applications. Integral laser beam slots allow the use of guide strings or leveling laser guns to ensure that all luminaries are installed in an level and straight plane. Collar can be rotated up to 45° once the housing is installed in the ceiling (prior to having drywall installed). TRIM OPTION: Post painted powder coated Die-Cast trim ring available in white and chrome. Please consult factory for custom paint color options. Collar and trim rotate jointly. Solite Frosted Lens is standard on all trims. Please consult factory for additional lens options. Available in lensed adjustable downlight or lensed adjustable wallwash. TRIM- LESS: Die-Cast perforated meshcover intended for installation in drywall or plaster ceilings. Mudding maybe applied right up to the edge of the fixture opening to provide seamless appearance. Trim-Less accessory is secured to the housing to prevent fractures in the ceiling and or drywall during and after installation. AIMING: Fusion ER3’s proprietary hot aiming system allows the lamp to be positioned at the perfect setting to ensure the proper position of the beam of light before trim is installed. Lamp holder is designed to ensure that the center beam of the light bulb emerges out of fixture at any angled position from 0° to 45°. The lamp holder contains degree markings, rotates 359° horizontally and 45° vertically with a screw driver. The lamp holder is lockable at both the vertical and the horizontal plane. The integrity of the design and lamp positioned are kept during relamping or servicing the fixture. ELECTRICAL/ TRANSFORMER: Junction box and transformer maybe accessed from below the ceiling and above the ceiling. Junction Box is Listed for through branch circuit wiring,12 AWG 90º C supply Conductors, and has four 1/2” KOs, one 3/4” KO and four Romex knockouts with true pry-out slots and strain clamps. Transformer supplied is thermally protected Class II dimming electronic transformer enhanced in heat dissipating cover attached to junction box cover. De-rated lamp wattage labeling is available please consult factory. MOUNTING: Preinstalled bar hangers allow housing to be positioned and locked at any point within a 24” joist span. They can be positioned on either the long or short axis of the housing and can be shortened for 12” joists. They contain a double-headed real nail for secure attachment into the joist. Bar hanger nails are installed on a 20º downward angle for better contact, and the 90º pivoting mounting plate makes installation fast and accurate. Bar hangers can fit onto T-Bar spline with additional slots and holes for special mounting methods if necessary. Butterfly brackets are also provided and are constructed from 18-gauge steel and can be adjusted vertically. Butterfly brackets may be installed with 3/4” or 1-1/2” lathing channel, 1/2” EMT, or optional C-Channel mounting bars are available. LABELS: c-UL-us listed for damp location. c-UL-us listed for feed Through Wiring. c-UL-us listed for direct contact with insulation. WARRANTY: Fusion ER Recessed luminaries are covered by Fusion’s one year limited warranty. As a system, we stand behind our entire products from housing to bar hangers. WWW.IUSEFUSION.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333 FUSION ER3 NON-IC SERIES LED DOWNLIGHT LED ER3 RECESSED Open downlight 1302 Lensed Downlight 1328 Lensed trimless Downlight ETS Open wall wash 1363 Lensed wall wash 1307 Lensed trimless wall wash ETSW Pinhole 1314 3” 3” 7” ER3 7” 16” 10” 4” 5-3/8” E R 3 ORDERING INFORMATION N O N - I C Example: ER3-F-LED-2000L-DIMTR-120-30K-EFS-1302-W-WH LUMINAIRE SELECTION ES3 LED FLANGE OPTION LIGHT SOURCE LUMENS ES3 F - (Flanged) T - (Trimless) LED 1200L 2000L DIMMING DIMTR-120 LUTH-120 LUTH-277 DIM10-MVOLT CCT ACCESSORIES/OPTIONS OPTIONS 27K 30K 35K 40K 50K blank - Standard bar hangers (included) BP31 - 27” C-channel bar hangers RIF - RIF filter - TRIM OPTION SELECTION S E R I E S SERIES TRIM 1302 1328 1363 1307 1314 TRIM COLOR - Open Downlight W-WH - White - Lensed Downlight CL-WH - Chrome - Open Wall Wash B-WH - Black - Lensed Wall Wash - Pinhole TRIM ACCESSORIES L E D TRIM FLANGE OPTION EFS - Flanged trim ETS - Trimless Downlight ETSW - Trimless Wall Wash F U S I O N ER3-T-Housing ER3-F-Housing 3” 4” BP-ES3-MR16-CL - Clear Lens BP-ES3-MR16-LI - Linear spread Lens BP-ES3-MR16-SP - Spread/Prismatic Lens BP-ES3-MR16-SO - Solite Lens BP-ES3-MR16-UV - Anti UV/Ultraviolet Lens Due to the changes of constant improvement in lighting technology, all details are subject to change without notice. Consult factory for up to date information. 443-D