Hardware Spec Sheet - AMERGINT Technologies

SL Modem/BBU
Hardware Specification
The satTRAC SL Modem/BBU provides telemetry, ranging, and commanding on a next-gen software radio platform
consisting of a high-availability commercial off-the-shelf server, a high-performance signal converter, and one or more
software applications. The tables below summarize the hardware specifications for the SL platform. Please refer to the
satTRAC top-level data sheet for an overview of the innovative capabilities of satTRAC. Refer to each individual software
application data sheet for a summary of the waveform performance specifications.
RF Output
Number of Output Channels
Specification
RF Input
1
Frequency Ranges:
SGLS Up
2
Frequency Ranges:
1750 to 1850 MHz
USB Up
2025 to 2120 MHz
Test (unfiltered)1
1690 to 2400 MHz
Output Power Range
Specification
Number of Input Channels
-30 to +13 dBm
SGLS/USB Down
Test/Echo (unfiltered)
2200 to 2300 MHz
1
Input Power Range
+28 dBm
Instantaneous Dynamic Range
Output Power Accuracy
+/-0.5 dB
Noise Figure (at max gain)
Noise Power Density
Output VSWR
Output Impedance (nominal)
Gain Adjustment
Instantaneous Bandwidth
Tuning Step Size
Output Spurious
Frequency Stability and Aging
(using internal reference)
Amplitude Response (Flatness)
80 dB
-135 dBm/Hz max
1.25:1
50 Ohms
60 dB in 0.1 dB Steps
> 20 MHz
< 1 µHz
< -65 dBc
with output power -15 to 13 dBm
+/- 5 ppb over operating temp
range, < +/- 100 ppb/yr
+/- 0.2dB over 4 MHz
Phase Noise (See Plot)
-100 to -23 dBm
Maximum Input Signal (damage)
P1dB
Instantaneous Dynamic Range
1690 to 2400 MHz
+18 dBm
> 74 dB
< 4 dB typical
8 dB (max)
Input VSWR
Input Impedance (nominal)
AGC (50 dB range) Time Constant
Instantaneous Bandwidth
1.25:1
50 Ohms
0.001 to 1 seconds
20 MHz (max)
Tuning Step Size
In-Band Spurious
Amplitude Response (flatness)
Gain
1
< 1 µHz
< -59 dBc
+/- 0.2dB over 4MHz
48 dB (max)
Unfiltered outputs do not meet the output spurious performance specifications.
Timing and Reference
Signals
Specification
-60 dBc/Hz
Frequency Reference
100 Hz
-80 dBc/Hz
Internal Reference Accuracy
< 0.1 ppm
1 kHz
-92 dBc/Hz
Time References Supported
IRIG-B, 1PPS, NTP
10 kHz
-97 dBc/Hz
100 kHz
-101 dBc/Hz
Time Reference Voltage Levels
(for IRIG and 1PPS)
1 MHz
-121 dBc/Hz
10 MHz
-124 dBc/Hz
100 MHz
-136 dBc/Hz
10 Hz
© 2016 AMERGINT Technologies Inc.
All Rights Reserved
Rev. 03-016
10 MHz
TTL Levels
Timing Reference Impedance
50 Ohms
Timing Reference Max Input Level
+10 dBm
INNOVATIVE • ADVANTAGE
SL Modem/BBU
Network and Optional Serial I/O
Ethernet
Specification
10/100/1000 Mbps
Differential Input Pairs (RS-422)
10 Pairs
Differential Output Pairs (RS-422)
10 Pairs
Generic Purpose I/O (TTL)
System Power
Server
8 Pins
Specification
110V/220V 50/60 Hz 450W
Dual Redundant Hot Swap
Power
satTRAC-SL Chassis
(Sourced from server or separate
supply)
Physical Information
12 VDC at 6 amps
Specification
Weight
Server Dimensions
satTRAC-SL Dimensions
Environmental Information
< 65 lbs
3.4 H x 19 W x 25.5 D (in)
1.75 H x 17.1 W x 18 D (in)
Specification
Server Temperature (Operating)
-5ºC to 45ºC
Server Temperature (Storage)
Server Relative Humidity
-40ºC to 65ºC
5% to 90% non-condensing
satTRAC-SL Temperature
(Operating)
-5ºC to 45ºC
satTRAC-SL Temperature
(Storage)
-40ºC to 65ºC
satTRAC-SL Relative Humidity
satTRAC-SL Transmit Output Spectral Purity
5% to 90% non-condensing
satTRAC-SL Transmit Output Measured Phase Noise
Standard USB & SGLS Frequency Bands
*
*
* This application is ITAR controlled
2315 Briargate Pkwy., Suite 100, Colorado Springs, CO 80920
www.amergint.com • info@amergint.com
719-522-2800
Please contact us for more detailed product
information
AMERGINT Technologies is an
Employee Owned Company