Instruction Manual
LED Vintage Edison Lights 10L Plug In
Your item has been carefully packaged for transit, however due to the nature of the materials used; some debris
may appear in the bottom of the packaging or while unpacking. We have designed this item so its beauty will not
be diminished by the debris.
Included:
 One (1) LED Vintage Edison Light Strand Plug In 10L
Installation Instructions:
1. Carefully remove light strand from packaging.
2. Ensure that the adaptor is plugged into the light strand.
3. If desired, use the extra 6’ cord in between the adaptor and the light strand for extra lead length.
4. Plug Strand into wall outlet.
5. Unplug the strand when leaving the house or when retiring at night, or if left unattended. Do not unplug by
pulling on cord.
6. Place in desired location.
Care Instructions:
 Please note these are LED lights and they are not replaceable.
 Store in cool dry location
When using electrical products, basic precautions should always be followed including the following:
IMPORTANT SAFETY INSTRUCTIONS
a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products
c)
d)
e)
f)
g)
h)
are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If
one is not provided, contact a qualified electrician for proper installation.
This seasonal use product is not intended for permanent installation or use.
Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
Do not let lamps rest on the supply cord or on any wire.
Unplug the product when leaving the house, when retiring for the night, or if left unattended.
This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should
not be played with or placed where small children can reach it.
Do not use this product for other than its intended use.
Do not hang ornaments or other objects from cord, wire, or light string.
Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
Do not cover the product with cloth, paper or any material not part of the product when in use.
Read and follow all instructions that are on the product or provided with the product.
i)
j)
k)
l)
m)
For a cord-connected or direct plug-in power unit, do not use an extension cord.
Reference the National Electrical Code, ANSI/NFPA 70, specifically for the installation of wiring and clearances
from power and lighting conductors.
Indoor and Outdoor Use
Made In China
M43609INSTREV122013
Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes
and standards, including fire-rated construction.
For a cord-connected or direct plug-in power unit, do not install or use within 10 feet of a pool.
For a cord-connected or direct plug-in unit, do not use in a bathroom.
WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI protected
receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a
qualified electrician for proper installation. Ensure that the power unit and cord do not interfere with completely
closing the receptacle cover.
WARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a building structure.
Consult a qualified electrician.
WARNING: Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface.
WARNING: Risk of Electric Shock. When used outdoors, install only on a circuit protected by a Class A GFCI.
WARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a building structure.
Consult a qualified electrician.
WARNING: Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface.
n) SAVE THESE INSTRUCTIONS
FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
Harmful interference in a residential installation. This equipment generates, uses and can radiate radio
Frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
Interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
▪ Reorient or relocate the receiving antenna.
▪ Increase the separation between the equipment and receiver.
▪ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
▪ Consult the dealer or an experienced radio/TV technician for help.
Indoor and Outdoor Use
Made In China
M43609INSTREV122013