COOPER LIGHTING - SURE-LITES ® DESCRIPTION The Sure-Lites CHX Series Double Head Exits are ideal exits for general purpose applications. An extensive range of field installed accessories, choice of faces and the variety of possible mounting configurations permit the tailoring of the basic exit for almost any application. Durable steel construction, attractive styling and high efficiency illumination make this series compatible in commercial, institutional and multi-housing applications. Type Catalog # Project Date Comments Prepared by S P E C I F I C AT I O N F E AT U R E S E l e c t ro n i c H o u s i n g C o n s t ru c t i o n Code Compliance - Separate Exit Sign/Emergency Light circuitry for complete compliance with Chicago Code - Dual Voltage Input 120/277 VAC, 60 Hz - Line-latching - Solid-state Voltage Limited Charger - Solid-state Switching- Brownout Circuit - Low-Voltage DisconnectOverload/Short Circuit Protection - Test Switch/Power Indicator Light - 20-gauge steel housing - White Finish - Universal pattern knockouts on rear for direct mounting to junction box - Steel canopy (where supplied) allows ceiling or end mounting - Red silk-screened lettering on white, heat tempered, impact resistant glass lens - Other open face lenses availableconsult Cooper Lighting representative - Lens installs from side of fixture for more convenient, safe maintenance - UL 924 Listed - Life Safety NFPA 101 - NEC/OSHA - City of Chicago Fire Code B a tte r y - Sealed Lead Calcium, Recombination Battery for emergency light - Sealed Nickel Cadmium for exit Sign - Full Recharge Time, 24 hrs. (max.) Wa rra n t y - Unit: 1-year - Lead Calcium Battery: 5-year pro-rata - Nickel Cadmium Battery: 15-year pro-rata L a m p Da t a - Heads - two 6V, 12W, DC halogen bi-pin lamps in metal heads with die-cast swivels - Sign Face – High Brightness White LEDs ST E E L E X I T S E L F P OW E R E D EMERGENCY LED EXIT C H I C AG O E X I T L I G H T I N G 6-5/8" [168mm] 4-3/8" [111mm] CHX-DH SERIES 2-5/16" [59mm] 7/8" [22mm] 4-1/2" [114mm] 14-3/8" [365mm] 9" [229mm] 6-1/2" [165mm] 12-1/4" [311mm] 7-5/8" [194mm] O R D E R I N G I N F O R M AT I O N Sample Number: CHX71DH Family Face Options Lens Options Housing Material CHX=Steel Exit, LED 1=Single Face 2=Double Face Blank=Standard White Lens P=Phosphorescent Lens Blank=Standard Cold Rolled Steel Head Options Stairs Options Exit circuit: DH=Double Head Combo (CHX7 only) Blank=Exit Sign -STAIRS=STAIRS sign (include dash) Input Power: 3.1W Series 7=Self Powered E N E R G Y D ATA Maximum power consumption under all charge conditions: Arrow Options Blank=No Arrow AR=Arrow Right AL=Arrow Left DA=Double Arrow ARL=Arrow Right/Left (double face only) Emergency circuit: Input Power: 16W Total Fixture: Input Power: 19.1W Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADX120670 2012-05-22 08:49:51 CHX-DH SERIES P H OTO M E T R I C S Horizontal Distribution 15 FEET LEFT 0 FEET RIGHT 15 Ve r t i c a l D i s t r i b u t i o n 1FC 0 10 30 20 0.5 40 50 0.3 0.2 60 70 LAMP AXIS 80 90 0.1 100 15 FEET LEFT 0 FEET RIGHT 15 2FC 0 10 1FC 30 20 0.5 40 0.3 50 60 0.2 70 LAMP AXIS 80 90 0.1 100 FEET FROM LAMP (Measured on axis) FEET FROM LAMP (Measured on axis) Lamp No. 29-66 Lamp No. 29-66 Initial Lumens – 29-66 @ 302 T E C H N I C A L DATA Lamps Lens CHX Series Exits use energy efficient, long life LED’s to provide uniform diffuse illumination of the exit face. These white LEDs require no maintenance and consume less than one watt,on average. Double head units also have two 6V, 12W DC halogen bi-pin lamps in metal heads with die cast swivels. The lens provided is made of impact resistant, heat tempered glass. Red lettering is silkscreened on a white phosphorescent background. Full sroke arrows are provided as specified. H o u s i n g C o n s t ru c t i o n Exit housing is constructed of durable 20-gauge cold rolled steel with corrosion resistant polyester powder coat paint finish. All exits can be mounted and wired through knockouts located on the top and side. Surface mount back panel has knockouts for direct mounting to junction box. The mounting canopy is made of cold rolled steel in matching finish. Impact resistant, heat tempered glass lens and back plate install in channels in the exit housing to eliminate light leaks. Heads All metal formed aluminum lampheads. The diecast metal three dimensional swivel assembly permits approximate aiming adjustment from 80° vertical and 358° rotation. The placement is secured with a lockable pivot mounted on a rotating base ring. which eliminates corroded and pitted contacts or mechanical failures associated with relays. The switching circuit is designed to detect a loss of AC voltage and automatically energize the lamps. Upon restoration of AC power, the emergency lamps will switch off and the charger will automatically recharge the battery. S o l i d - S t a te C h a rge r Supplied with a 120/277 VAC, voltage regulated solid-state charger. Immediately upon restoration of AC current after a power failure, the charger provides a high charge rate. The charge circuit reacts to the condition of the battery and alters the rate of charge in order to maintain peak battery capacity and maximize battery life. Solid-state construction recharges the battery following a power failure in accordance with UL 924. O ve rl o a d a n d S h o rt C i rc u i t P ro te c t i o n The solid-state overload monitoring device in the DC circuit disconnects the lamp load from the battery should excessive wattage demands be made and automatically resets when the overload or short circuit is removed. This overload current protective feature eliminates the need for fuses or circuit breakers for the DC load. S o l i d - S t a te Tra n s fe r These exits incorporate solid-state switching S e a l e d L e a d C a l c i u m B a tte r y The fully sealed, long-life, maintenance-free lead calcium battery is ideal for emergency lighting applications. These batteries typically provide 8 to 10 years of life and may be operated in any position. S e a l e d N i cke l C a d m i u m B a tte r y Sure-Lites sealed nickel cadmium batteries are maintenance-free with a life expectancy of 15 years. The sealed rechargeable nickel cadmium battery offers high discharge rates and stable performance over a wide range of temperatures. Wa rra n t y All Sure-Lites products are backed by a firm one-year warranty against defects in material and workmanship (excluding lamps). Maintenance-free, long-life, sealed lead calcium batteries carry a five-year pro-rata warranty and sealed nickel cadmium batteries carry a 15-year pro-rata warranty. Specifications and dimensions subject to change without notice. Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801 ADX120670 2012-05-22 08:49:51