MD1F
THRU
MD7F
1.0 AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS
MD-F PACKAGE
FEATURES
‧Rating to 1000V PRV
‧
‧Ideal for printed circuit board
Reliable low cost construction utilizing molded
.024(0.6 )
.028(0.7 )
.200(5.1 )
.138(3.5 )
.193(4.9 )
.126(3.2 )
.161(4.1 )
.154(3.9 )
plastic technique results in inexpensive product
‧Lead tin plated copper
.216(5.5 )
.050(1.27 )
.010(0.25 )
.209(5.3 )
.045(1.15 )
.006(0.15 )
MECHANICAL DATA
.252(6.4 )
‧ Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
.236(6.0 )
‧Epoxy: Device has UL flammability classification 94V-O
‧Polarity: Polarity symbol marked on body
Dimensions in inches and(millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Single phase half wave, 60Hz, resistive of inductive load.
For capacitive load, derate current by 20%
PARAMETER
SYMBOL
Marking Code
MD1F
MD2F
MD3F
MD4F
MD5F
MD6F
MD7F
MD7F
MD1F
MD2F
MD3F
MD4F
MD5F
MD6F
M i
Maximum
R
Recurrentt P
Peak
kR
Reverse V
Voltage
lt
VRRM
50
100
200
400
600
800
Maximum RMS Bridge Input Voltage
VRMS
35
70
140
280
420
Maximum DC blocking voltage
VDC
50
100
200
400
600
Maximum Average Forward Rectified Output
Current at TA=40oC(Note 1)
UNIT
1000
V
560
700
V
800
1000
V
IF
1.0
A
IFSM
30.0
A
Current squared time t < 8.3ms , Ta = 25 C
I2 t
3.75
A s
Maximum Forward Voltage Drop Per Bridge
Element at 1A Peak
VF
1.1
V
Maximum DC Reverse Current @ TJ=25°C
at Rated DC Blocking Voltage @ TJ=125°C
IR
5
500
uA
mA
Peak forward surge current, 8.3ms single half sinewave superimposed on rated load
o
Typical Junction Capacitance Per Element (Note1)
Typical Thermal Resistance (Note2)
2
CJ
RθJA
30.0
pF
75.0
°C / W
RθJC
45.0
°C / W
Operating
p
g Temperature
p
Range
g
TJ
-55 to +150
°C
C
Storage Temperature Range
TSTG
-55 to +150
°C
NOTES:
1.Measured at1.0MHz and applied reverse voltage of 4.0V DC.
2.Thermal resistance junction to ambient and junction to case
201
8
WILLAS ELECTRONIC CORP.
MD1F
THRU
MD7F
1.0 AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS
MD-F PACKAGE
FIG.2-MXIMUM NON-REPETITIVE
SURGE CURRENT
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD CURRENT
AMPERES
FIG.1-FORWARD CURRENT DERATING CURVE
1.0
0.8
0.6
0.4
MOUNTED ON PC BOARD
SINGLE PHASE HALF WAVE 60Hz
RESISTIVE OR INDUCTIVE LOAD
0.2
0.1
100
50
0
150
50
40
30
20
SINGLE HALF-SINE-WAVE
(JEDEC METHOD)
10
0
1
2
10
20
50
100
NUMBER OFCYCLES AT 60Hz
AMBIENT TEMPERATURE, °C
FIG.3-TYPICAL JUNCTION CAPACITANCE
FIG.4-TYPICAL FORWARD CHARACTERISTICS
100
10
INSTANTANEOUS FORWARD CURRENT,(A)
CAPACITANCE(pF)
5
10
T J=25°C,f=1MHZ
1.0
0.1
1.0
4.0
10.0
1.0
0.1
T J=25°C
PULSE WIDTH:300us
2% DUTY CYCLE
0.01
100
0
0.2
REVERSE VOLTAGE,(VOLTS)
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
INSTANTANEOUS FORWARD VOLTAGE,VOLTS
FIG.5-TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT,(µA)
100
T J=125°C
10
1.0
T J=25°C
0.1
0.01
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE,(%)
2014-08
WILLAS ELECTRONIC CORP.
WILLAS
FM120-M+
MD1F
THRU
THRU
FM1200-M+
MD7F
Pb Free
Product
11.0A
.0 AMP
SURFACE
MOUNT
GLASS PASSIVATED
BRIDGE RECTIFIERS
SURFACE
MOUNT
SCHOTTKY
BARRIER RECTIFIERS
-20V- 200V
MD-F PACKAGE
SOD-123+
PACKAGE
Features
Package outline
• Batch process design, excellent power dissipation offers
better reverse leakage current and thermal resistance.
• Low profile surface mounted application in order to
SOD-123H
optimize board space.
0.146(3.7)
power loss, high efficiency.
• LowOrdering
Information:
0.130(3.3)
0.012(0.3) Typ.
• High current capability, low forward voltage drop.
Packing • High surge capability.Device PN (1) (2)
overvoltage protection.
• Guardring for
Part Number‐T G ‐WS Tape&Reel: 5 Kpcs/Reel 0.071(1.8)
• Ultra high-speed switching.
0.056(1.4)
Note: (1)
Packing code, Tape & Reel Packing epitaxial
planar chip, metal silicon junction.
• Silicon
parts meet environmental standards of
• Lead-free(2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” MIL-STD-19500 /228
for packing code suffix "G"
• RoHS
product
Halogen free product for packing code suffix "H"
Mechanical
data
• Epoxy
: UL94-V0 rated flame retardant
: Molded plastic, SOD-123H
• Case
,
• Terminals :Plated terminals, solderable per MIL-STD-750
0.040(1.0)
0.024(0.6)
0.031(0.8) Typ.
0.031(0.8) Typ.
Method 2026
• Polarity : Indicated by cathode band
• Mounting Position : Any
• Weight : Approximated 0.011 gram
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL
CHARACTERISTICS
***Disclaimer***
Ratings at 25℃ ambient temperature unless otherwise specified.
WILLAS reserves the right to make changes without notice to any product Single phase half wave,
60Hz, resistive of inductive load.
For capacitive load,
derate
current by 20%
specification herein, to make corrections, modifications, enhancements or other SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT
RATINGS
changes. WILLAS or anyone on its behalf assumes no responsibility or liability 12
13
14
15
16
18
10
115
120
for any errors or inaccuracies. Data sheet specifications and its information 20
30
40
50
60
80
100
150
200
Maximum Recurrent
Peak Reverse Voltage
Volts
VRRM
Volts
14
21
28
35
42
56
70
105
140
Maximum RMS Voltage
VRMS
contained are intended to provide a product description only. "Typical" parameters Volts
Maximum DC Blocking Voltage
20
30
40
50
60
80
100
150
200
VDC
which may be included on WILLAS data sheets and/ or specifications can Amps
Maximum Average Forward Rectified Current
IO
1.0
and do vary in different applications and actual performance may vary over time. Peak Forward Surge Current 8.3 ms single half sine-wave
30
IFSM
Amps
WILLAS does not assume any liability arising out of the application or superimposed on rated
load (JEDEC method)
℃/W
40
Typical Thermal Resistance (Note 2)
RΘJA
use of any product or circuit. PF
120
Typical Junction Capacitance (Note 1)
CJ
-55
to
+125
-55
to
+150
Operating Temperature Range
TJ
℃
- 65 to +175
Storage Temperature Range
TSTG
℃
WILLAS products are not designed, intended or authorized for use in medical, Marking Code
life‐saving implant or other applications intended for life‐sustaining or other related CHARACTERISTICS
SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT
Volts
0.9
0.92
VF
0.50
0.70
0.85
applications where a failure or malfunction of component or circuitry may directly 0.5
Maximum Average Reverse Current at @T A=25℃
IR
mAmps
or indirectly cause injury or threaten a life without expressed written approval 10
@T A=125℃
Rated DC Blocking
Voltage
of WILLAS. Customers using or selling WILLAS components for use in NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
such applications do so at their own risk and shall agree to fully indemnify WILLAS 2- Thermal Resistance From Junction to Ambient
Inc and its subsidiaries harmless against all claims, damages and expenditures. Maximum Forward Voltage at 1.0A DC
2012-06
2014-08
WILLAS ELECTRONIC CORP.
WILLAS ELECTRONIC CORP.