Ultra Low Noise High Frequency Oven Controlled Crystal Oscillator TE ULN HF C OCXO ULN HF C Specific request can be addressed to RAKON info@rakon.fr Product Description This ITAR Free Ultra Low Noise High Frequency Oven Controlled Crystal Oscillator, available in a 60x50x27mm package, is specially designed to meet the request of the most demanding phase noise applications in airborne environment. Features • • • • • • • ITAR FREE Ultra Low Noise (ULN), Oven Controlled (OCXO), Crystal Oscillator Frequency : 80 to 125 MHz Ultra low phase noise @ 100 MHz : -163 dBc/Hz @ 1kHz -178 dBc/Hz noise floor Supply Voltage :+12V or +15V 5-pin machined package with shock absorbers Airborne environment Typical phase noise curves @ 100 MHz Courtesy Noise XT Applications • • Airborne military equipment Radar & Telecom Specifications 1.0 Environmental conditions Parameters Operating Temperature Switch-on Temperature Non-Operating Temperature Random Vibration Conditions/remarks Min Nom Max Option A 0 25 70 Option B -20 25 70 Option C -40 25 85 TSo -40 85 TNOp -55 125 Overall : 17grms 15 Hz – 300 Hz : +6dB/octave 300 Hz – 1 kHz : 0.2 g²/Hz 1 kHz – 2 kHz : -6dB/octave Unit °C °C °C °C °C December, 23rd 2011 Shortform, 51000869.110, Issue A2 1/4 www.rakon.com Ultra Low Noise High Frequency Oven Controlled Crystal Oscillator TE ULN HF C OCXO ULN HF C 2.0 Electrical interface Parameters Power supply Conditions/remarks Option 1 Option 2 Min Nom Max 11.4 12 12.6 14.3 15 15.8 45 50 55 9.8 10 10.2 1 0 10 10 Unit V V Ω V mA V κΩ Conditions/Remarks Min 80 Typ Unit MHz Load Impedance Reference voltage Ref. voltage current Control voltage Input impedance 3.0 Performances Parameters Nominal Frequency Relative pulling frequency range (positive slope) Steady state supply current Warm up supply current Initial frequency accuracy Frequency stability vs temperature Frequency variation vs. supply voltage Frequency variation vs. load Frequency ageing Frequency warm up Output waveform Output level Harmonics level Spurious level VSWR (FO ±1.5 MHz) Referred to frequency @ Vc=5V fnom ≥ 100 MHz Referred to frequency @ Vc=5V fnom<100 MHz Typical @ 25°C Frequency achievement 5mn after start up @ 25°C @ 25°C ; Vc = Vcnom Option A Option B Option C ±2 ppm ±4 3.5 ppm W 8 ± 0.5 ± 0.1 ± 0.2 ± 0.5 W ppm ppm ppm ppm ± 0.1 ± 0.1 ppm ppm ± 0.5 5 ppm mn 15 -25 -100 2:1 -130 -158 -170 -174 -85 -130 -145 -170 dBm dBc dBc Vcc ±5% @25°C For ±10% variation of load Aging over 1st year after 30 days operating 11 0.1 kHz 1 kHz 10 kHz (noise floor) 100 kHz 0.1 kHz 1 kHz 2 kHz (noise floor) 10 kHz Static Phase noise @ 100 MHz Dynamic Phase noise @ 100 MHz Max 125 Sine 13 -135 -163 -172 -178 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz December, 23rd 2011 Shortform, 51000869.110, Issue A2 2/4 www.rakon.com Ultra Low Noise High Frequency Oven Controlled Crystal Oscillator TE ULN HF C OCXO ULN HF C 4.0 Mechanical features 5.0 Pin description Pin number 1 2 3 4 5 Name Fout GND Vc Vcc Vref Function Frequency output Electrical & Mechanical ground Voltage control for electrical tuning Sypply voltage Reference voltage December, 23rd 2011 Shortform, 51000869.110, Issue A2 3/4 www.rakon.com Ultra Low Noise High Frequency Oven Controlled Crystal Oscillator TE ULN HF C OCXO ULN HF C 6.0 Ordering part number definition The part number breakdown is defined as follows: TE ULN HF C A B 1 100M000000 Series Package option Noise floor/Output Level A : noisefloor = - 174 dBc/Hz, 13dBm B : noisefloor = - 174 dBc/Hz, 15dBm Temperature range/Stability A = 0°C to +70°C, ± 0.1 ppm B = -20°C to +70°C, ± 0.2 ppm C = -40°C to +85°C, ± 0.5 ppm Supply voltage 1 = 12V 2 = 15V Frequency, fnom December, 23rd 2011 Shortform, 51000869.110, Issue A2 4/4 www.rakon.com