EKOHEAT
10 kW to 1200 kW,
750 Hz to 150 kHz
Ambrell’s versatile EKOHEAT induction heating power supplies are available
in a range of different models to cover a broad spectrum of applications.
Models are available with maximum output power levels from a low of 10 kW
to a high of 1200 kW and a low frequency of 750 Hz up to a high frequency of
150 kHz. Heating smaller parts with induction requires higher frequencies, so the
lower power EKOHEATs are available with higher output frequencies. For the
heating of larger parts, higher power EKOHEATs are available with lower
operating frequencies.
All 72 EKOHEAT models have the same control and display features and each
one is an efficient direct offline inverter with a power factor greater than 0.9.
EKOHEAT is a parallel resonant induction heating system with power output
from a multitap transformer for ease of matching to the part being heated.
Ambrell supplies a range of resonant workheads that may be located up to
30 meters (100 feet) from the EKOHEAT. A user-friendly front panel display
allows for setting the power required to heat the part. Embedded firmware
can be accessed from the front panel for system set-up and fault diagnostics.
All EKOHEATs will operate
at full rated power for 100%
of the time, controllable from
1% to 100% and with a
resolution of 0.024%. The
frequency-agile digital tuner
(patent pending) provides
ultimate part heating versatility
with excellent repeatability.
EKOHEAT 125 kW 10 kHz front panel display operating at 11.07 kHz in power
control with a 125 kW set point and a run time of 59 minutes and 9.98 seconds.
EKOHEATs are designed
and built using a modular
power concept which provides
for parts commonality,
simplified worldwide service
and support, and allows for
more power to be added to
your system should your application requirements change.
EKOHEAT
LINE OF PRODUCTS
75 kW with
models covering
the four
frequency
bands
15 to 45 kHz
10 to 30 kHz
5 to 15 kHz
2 to 5 kHz
10 and 15 kW
50 to 150 kHz
65 to 300 kW
with models
covering the
six frequency
bands
50 to 150 kHz
15 to 45 kHz
10 to 30 kHz
5 to 15 kHz
2 to 5 kHz
0.75 to 2 kHz
20 to 50 kW with
models covering
the four frequency
bands
50 to 150 kHz
15 to 45 kHz
10 to 30 kHz
5 to 15 kHz
180 to 600 kW with
models covering the
six frequency bands
50 to 150 kHz
15 to 45 kHz
10 to 30 kHz
5 to 15 kHz
2 to 5 kHz
0.75 to 2 kHz
500 to 900 kW with
models covering the
five frequency bands
15 to 45 kHz
10 to 30 kHz
5 to 15 kHz
2 to 5 kHz
0.75 to 2 kHz
700 to 1200 kW with
models covering the
five frequency bands
15 to 45 kHz
10 to 30 kHz
5 to 15 kHz
2 to 5 kHz
0.75 to 2 kHz
Easy to Use
• User-friendly operator front panel controls
• System configuration from front panel
• Cycle timer, peak and short-cycle data capture
• 10 ten-step heating profiles
• Overload-tolerant output management
• Seven language display suite
(EN, ES, FR, DE, IT, PT, PL)
• System diagnostics displayed on front panel
Versatile
• Efficient heating of many part geometries,
sizes and compositions:
- Multiple capacitor configurations
- Multiple tap transformer configurations
- Voltage or power control
• Repeatable, reliable heating, agile
frequency tuning
• Through-Curie heating
• Movable workhead: up to 30 meters (100 feet)
• Sub-second to continuous cycle times
• Remote operation or logging with RS485 port
• Accepts international AC line voltages
The transformer tap panel on the output transformer for an EKOHEAT
125/10 showing the easy tap change using a brass washer and nut. This
transformer has 10 transformer taps and is tapped to tap 15.
All EKOHEATs
can be remotely
controlled using a
connectionfriendly panel
with 0-10V,
4-20ma, 24V inputs or a RS 485
serial port.
About Ambrell
EKOHEAT is CE marked and manufactured at our ISO 9001:2008
certified factory. As a pioneer in solid state induction heating
technology with over 25 years of innovation, Ambrell provides
industry leading heating solutions. With a firm commitment to
our customers, we are proud to deliver quality products and
solutions to a variety of industries and markets. Ambrell is
headquartered in the United States with worldwide operations including Ambrell Ltd in the United Kingdom, Ambrell SARL
in France and Ambrell BV in the Netherlands.
www.ambrell.com
http://ekoheat.ambrell.com/
Ambrell/Ameritherm Inc.
Corporate Headquarters
39 Main Street
Scottsville, NY 14546
tel: +1 585 889 9000
fax: +1 585 889 4030
sales@ambrell.com
411-0173-100 Rev A
Ambrell, Ltd.
Phoenix Works, Saxon Way
Battledown Industrial Estate
Cheltenham, Gloucestershire
GL52 6RU
tel: +44 (0)1242 514042
fax: +44 (0)1242 224146
salesuk@ambrell.com
Ambrell B. V.
Holtersweg 1
7556 BS Hengelo
The Netherlands
Tel: +31 (0) 880 150 100
Fax: +31 (0) 546 788 154
saleseu@ambrell.com
Ambrell SARL
Tour Sébastopol
3 quai Kléber
67000 Strasbourg
France
Tel: +33 970 440 335
Fax: +33 367 840 019
saleseu@ambrell.com