G2TM LOUVER
BOLLARD
WEDGE
CATALOG
NUMBER
NOTES
TYPE
DESCRIPTION
The G2 Louver Bollard is a low level area lighting luminaire
that combines visual appeal with superior performance and
unequalled quality. It is designed to work in building perimeter areas and public spaces complementing a wide variety
of architectural styles.
The G2 Louver Bollard offers a superior vandal resistant mounting with integral leveling for unmatched strength and stability.
Features like these in a bollard luminaire ensure long life and
sustained performance.
Symmetric and Forward Throw lighting distributions are available in a louver design that creates a cutoff luminaire with
reduced glare. Other lighting options include Light Wash
for illuminating the bollard base and Color Wash, a patentpending LED design ideal for creating common color themes
in pedestrian areas.
Specifications
L:
8”
203 mm
4”
102 mm
41”
1041 mm
W:
H:
EXAMPLE: G2LBW 36 70M 120 FT LEDAF LEDBB DCT LPIC DBLB
ORDERING INFORMATION (60HZ)
G2LBW
36
70M
120
FT
Model
Height1
Lamp Type
Voltage
Distribution
G2LBW
36
Fluorescent
MH
120
Internal
42
26DTT
Triple Tube GX24q3
50M
ED17 Med.
50S
E17 Med.
208
FT
Forward Throw
32TRT
Triple Tube GX24q3
50CM
ED17 Med.
70S
E17 Med.
240
SYM
Symmetric
42TRT
Triple Tube GX24q4
70M
ED17 Med.
100S
E17 Med.
277
HPS
2
2
70CM
ED17 Med.
347
100M
ED17 Med.
120/277
100CM
ED17 Med.
35CMT6
T6 G12
70CMT6
T6 G12
TB (120,
208, 240,
277)
MVOLT 3
LEDAF LEDBB
DCT
LPIC
Light Options
Options
Lamp
Bollard Front
Circuits
LPI
LWF
Light Wash Front
DCT4,5
LEDAF
LED Color Wash, Amber Front
Fusing
LEDBF
LED Color Wash, Blue Front
SF6
Single Fuse
LEDGF
LED Color Wash, Green Front
DF7
Double Fuse
LEDRF
LED Color Wash, Red Front
Ballast
LEDCWF
LED Color Wash, Cool White Front
GEB8
LEDWWF
LED Color Wash, Warm White Front
4
Dual Circuit
LPIC10
Generic
Electronic Ballast
MLEBAD9 Analog Dimming
Ballast
Bollard Back
LWB
Light Wash Back
LEDAB
LED Color Wash, Amber Back
LEDBB
LED Color Wash, Blue Back
LEDGB
LED Color Wash, Green Back
LEDRB
LED Color Wash, Red Back
LEDCWB
LED Color Wash, Cool White Back
LEDWWB
LED Color Wash, Warm White Back
DBLB
Receptacle
GFCI
Receptacle
ELN
Emergency
Battery Backup,
Fluorescent Only
Notes:
1 Bollard heights are nominal (shown in inches).
2 All lamps (excluding 35CMT6 and 70CMT6) are coated as recommended unless LPI is specified.
3 MVOLT standard with Fluorescent lamps, and MH lamps with GEB or MLEBAD ballast option.
4 Light options are mutually exclusive, chose one only. NOTE: For single circuit wiring, LED light
option not available with MVOLT or electronic ballast options operating at 277 Volt, or with 347
Volt. For DCT Dual Circuit option, secondary LED voltage required to be 120V ( for primary voltages: 120, 208, 220, 347, MVOLT ) or 240V (for primary voltages: 240V, 277V ).
5 DCT available with LED Color Wash option only.
6 SF available with 120, 277 or 347 Volt on HID fixture only.
7 DF available with 208, 220 or 240 Volt on HID fixture only.
Finish
2
Lamp
Included
DBLB
Designer Black, textured
DSPD
Dark Gray, textured
Lamp
Included,
Coated
DNAT
Natural Alum., textured
DWHG
Designer White, textured
DDBT
Dark Bronze, textured
DSPF
Rust, textured
DSST
Sandstone, textured
CF
Custom Finish
Optional Louvers Painted11
___/PL
Louvers painted to match fixture
8 Ballast options available with HID lamps only.
9 O-10 Volt remote analog dimmer system required (by others).
10 LPIC recommended for E17 and ED17 lamps. Not available with Fluorescent, 35CMT6 or
70CMT6 HID lamps.
11 Standard louver finish: Matte Black top, high gloss white bottom unless ___/PL is chosen.
NOTE:___/PL is not recommended for DWHG white or other light color finishes due to
increased visible glare and reduced fixture cutoff.
NOTE: Hydrel Reserves The Right To Modify Specification Without Notice. Any dimension on this sheet is to
be assumed as a reference dimension: “Used for information purposes only. It does not govern manufacturing
or inspection requirements.” (ANSI Y14.5-1973)
9144 Deering Avenue, Second Floor • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2014 Acuity Brands Lighting, Inc.
7/7/14
G2LBW
EXAMPLE: G2LBW 36 70M 24050HZ FT LEDAF LEDBB DCT LPIC DBLB IEC
ORDERING INFORMATION (50HZ)
G2LBW
36
70M
24050HZ
FT
Model
Height1
Lamp Type
Voltage
Distribution
G2LBW
36
Fluorescent
MH2
22050HZ
Internal
42
26DTT
Triple Tube GX24q3
50M
Ellip., E27
23050HZ
FT
Forward Throw
32TRT
Triple Tube GX24q3
50CM
Ellip., E27
24050HZ
SYM
Symmetric
42TRT
Triple Tube GX24q4
70M
Ellip., E27
70CM
Ellip., E27
100M
Ellip., E27
100CM
Ellip., E27
35CMT6
T6 G12
70CMT6
T6 G12
HPS2
70S
Ellip., E27
LEDAF LEDBB
DCT
LPIC
DBLB
IEC
Light Options
Options
Lamp2
Finish
Listing
Bollard Front
Circuits
Lamp
Included
DBLB
Designer Black, textured
DSPD
Dark Gray, textured
Lamp
Included,
Coated
DNAT
Natural Alum., textured
DWHG
Designer White, textured
DDBT
Dark Bronze, textured
LED Color Wash, Red Front
DSPF
Rust, textured
LEDCWF
LED Color Wash, Cool White Front
DSST
Sandstone, textured
LEDWWF
LED Color Wash, Warm White Front
CF
Custom Finish
3
LWF
Light Wash Front
LEDAF
LED Color Wash, Amber Front
LEDBF
LED Color Wash, Blue Front
LEDGF
LED Color Wash, Green Front
LEDRF
DCT4
LPI
Dual Circuit
LPIC 5
Bollard Back3
Optional Louvers Painted 6
LWB
Light Wash Back
___/PL
LEDAB
LED Color Wash, Amber Back
LEDBB
LED Color Wash, Blue Back
LEDGB
LED Color Wash, Green Back
LEDRB
LED Color Wash, Red Back
LEDCWB
LED Color Wash, Cool White Back
LEDWWB
LED Color Wash, Warm White Back
IEC
International
ElectoTechnical
Commission
(for use
with 50HZ
applications
only)
Louvers painted to match
fixture
Notes:
1 Bollard heights are nominal (shown in inches).
2 All lamps (excluding 35CMT6 and 70CMT6) are coated as recommended unless LPI is specified.
3 Light options are mutually exclusive, chose one only.
4 DCT available with LED Color Wash option only.
5 LPIC recommended for all Elliptical lamps. Not available with Fluorescent, 35CMT6 or 70CMT6
HID lamps.
6 Standard louver finish: Matte Black top, high gloss white bottom unless ___/PL is chosen.
NOTE:___/PL is not recommended for DWHG white or other light color finishes due to increased visible glare and reduced fixture cutoff.
FEATURES & SPECIFICATIONS
MATERIAL: Post: Copper-free Aluminum, 6061-T6
Head: Copper-free Aluminum A360
LAMP: HID: 70 Watt Max. T6, 100 Watt Max. Coated E17/Elliptical
Fluorescent: 42 Watt Max. Triple Tube.
FASTENERS: Stainless Steel.
FINISH: See ordering guide for color options.
LISTING: U.L., C.U.L.
CE and NEMKO listings pending.
VOLTAGE: See ordering guide.
DISTRIBUTION: SYM Symmetric, FT Forward Throw.
LENS: Clear Borosilicate for coated lamps. Frosted Borosilicate for clear lamps.
LIGHT OPTIONS: Choose between patent pending LED Color Wash or Light Wash. The LED
Color Wash option adds vibrant color to the bollard and creates the opportunity for customized
applications. The optional Light Wash reflector illuminates the bollard base by redirecting light
from main lamp source.
OPTIONS: Dual circuit with LED color wash only. Electronic ballast, GFCI receptacle, and
fluorescent battery backup.
BALLAST: Integrally mounted magnetic or electronic ballast with low starting temperature.
9144 Deering Avenue, Second Floor • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2014 Acuity Brands Lighting, Inc.
7/7/14
G2LBW